ML040700386
| ML040700386 | |
| Person / Time | |
|---|---|
| Site: | Sequoyah  |
| Issue date: | 02/26/2004 |
| From: | Salas P Tennessee Valley Authority |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| Download: ML040700386 (147) | |
Text
Tennessee Valley Authority, Post Office Box 2000, Soddy-Daisy, Tennessee 37384-2000 February 26, 2004 U.S. Nuclear Regulatory Commission ATTN:
Document Control Desk Washington, D.C.
20555 Gentlemen:
In the Matter of
)
Docket No. 50-328 Tennessee Valley Authority SEQUOYAH NUCLEAR PLANT (SQN) - UNIT 2 CYCLE 12 (U2C12) 90-DAY INSERVICE INSPECTION (ISI)
SUMMARY
REPORT In accordance with the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI, Article IWA-6230, TVA is providing the SQN ISI Summary Report within 90 days from completion of the inspections performed during the U2C12 refueling outage.
The summary report contains an overview of the in-service examinations and augmented non-destructive examination results that were performed on ASME Class 1 and 2 components from May 20, 2002, to December 11, 2003.
This report also contains a summary of ASME Section XI steam generator tube examinations (Appendix A), a report of the repair and replacement activities (Appendix B), a pressure test report (Appendix C), and the IWE metal containment evaluations (Appendix D).
This report does not contain TVA commitments.
Please direct questions concerning this issue to me at (423) 843-7170 or J. D. Smith at (423) 843-6672.
alas Licensing and Industry Affairs Manager Enclosure Pnnted orn mecled papr
U.S. Nuclear Regulatory Commission Page 2 February 26, 2004 cc:
Mr. Michael L. Marshall, Jr.,
Senior Project Manager (w/enclosure)
U.S. Nuclear Regulatory Commission Mail Stop O-8G9A One White Flint North 11555 Rockville Pike Rockville, Maryland 20852-2739
OWNER:
TENNESSEE VAL.LEY AUTHORITY PLANT: SEQUOYAH.
ZLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA. TENNESSEE 37402.2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED ASME SECTION Xi INSERVICE INSPECTION
SUMMARY
REPORT FOR SEQUOYAH NUCLEAR PLANT UNIT 2 CYCLE 12 DATE OF COMPLETION OF REPORT PREPARED BY REVIEWED BY REVIEWED BY REVIEWED BY col APPROVED BY 21' (o 4-GSITNES -NEER, COMPONENT (ISI)
ISO NDE LEVEL III ISO ISfINDE SUPERVISOR
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH N.LTEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402.2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED TABLE OF CONTENTS Form NIS-1 Owners Data Report Introduction / Summary of Inservice Examinations
- Scope Introduction
- Summary Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Appendix A Appendix B Appendix C Appendix D Examination Summary
- Examination Credit Summary Examination Code Category and Item Number Summary Examination Plan (Inservice Post Outage ISI Report and Preservice Report)
Summary of Notification of Indications Additional Samples Successive Examinations Augmented Examinations Analytical Evaluations Request For Relief Summary of Steam Generator Tubing Examinations NIS-2 Owners Data Report For Repair and Replacement Pressure Test Report IWE Metal Containment Evaluations 2 orf A $
Form NIS-1 FORM NIS-1 OWNERS' REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules
- 1. Owner Tennessee Valley Authority, 1101 Market St. Chattanooga. TN. 37402-2801 (Name and Address of Owner)
- 2. Plant Seauovah Nuclear Plant. P.O. Box 2000 Soddv Daisv. Tennessee 37384-2000 (Name and Address of Plant)
- 3. Plant Unit TWO (2)
- 4. Owner Certificate of Authorization (if required)
Not Required
- 5. Commercial Service Date June 1. 1982
- 6. National Board Number for Unit No Number Assigned
- 7. Components Inspected:
Component or Manufacturer Manufacturer State or National Appurtenance or Installer or Installer Province No.
Board No.
Serial No.
Pressurizer Westinghouse 1351 N/A 68-81 See Section 2 Tennessee Valley N/A N/A N/A (Examination Plan) for Authority remaining components Authority Note: Supplemental sheets in form of lists, sketches, or drawings maybe used provided (1) size is 81/2 in. X II in.,
(2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
3 6, 0 1IA5
Form NIS-1 FORM NIS-1 (back)
- 8. Examination Dates May 20. 2002 to December II. 2003
- 9. Inspection Period Identification:
Third Period
- 10. Inspection Interval Identification:
Second Interval Il. Applicable Edition of Section XI 1989 Addenda N/A
- 12. Date/Revision of Inspection Plan: December 15. 2003 Rev.l
- 13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for Inspection Plan. See Introduction/Summary of Inservice Inspections. Examination status is on schedule..
Examinations performed complete the first outage of the third period of the second inspection interval.
- 14. Abstract of Results of Examinations and Tests.
See Introduction/Summary of Inservice Inspections
- 15. Abstract of Corrective Measures. See Introduction/Summary of Inservice Inspections We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by ASME Code, Section Xl, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.
Certificate of Authorization No. (if applicable)
N/A Expiratinate, N/A Date 211CI 04 Signed TVA By
(
Owner CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford CT have inspected the components described in this Owners' Data Report during the period 01 Zo Ad Zc'oZ.
to Dee l
4
, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code, Section Xl.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, and tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this nspection.
,k*
Commissions
/7 c(5 3
Inspectorg Signature National Board, State, Province and Endorsements
\\
- r.
I
- ~ -A I
Eate r
'i.
IV 20U e 4
oF I /i5
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH,..CLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED INTRODUCTION /
SUMMARY
OF INSERVICE EXAMINATIONS
.5 I 155
OWNER:
TENNESSEEVAL.LEYAUTHORITY PLANT: SEQUOYAH s.JCLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402-2801 SODDY DAISY. TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED Scope:
This overview is for the Inservice Examinations performed during the Unit 2 Cycle 12 for Class 1 and 2 components as required by 0-SI-DXI-000-114.2
'ASME Section Xl ISI/NDE Program Unit 1 and Unit 2", SPP-9.1 "ASME Section XI and Augmented Nondestructive Examination Program", and IWA-6220 of ASME Section Xl, 1989 Edition. This report also includes steam generator tubing eddy current examinations in Appendix A, repairs and replacements performed in Appendix B, pressure tests in Appendix C, and the IWE metal containment evaluations in accordance with 10CFR 50.55a(b)(2)(ix) in Appendix D.
==
Introduction:==
The code of record for the second inspection interval which began December 16, 1995, is the 1989 Edition of the ASME Boiler and Pressure Vessel Code, Section Xl, Division 1. Starting April 12, 2002 the NDE techniques, qualification of personnel, weld reference system, and standards for examination are in accordance with 1995 Edition of ASME Section XI through the 1996 Addenda.
The Unit 2 Cycle 12 inservice examinations were performed during the period from May 20, 2002 to December 11, 2003. This report also includes repairs and replacements and pressure tests performed during this period. The Unit 2 Cycle 12 Refueling Outage began when the generator was taken off line on November 9, 2003. The outage was completed on December 11, 2003, when the generator was tied to the power grid. The inservice examinations, which include risk-informed inservice inspection examinations, were performed to the implementing plant Surveillance Instruction 0-SI-DXI-000-114.2, "ASME Section Xl ISI/NDE Program Unit 1 and Unit 2" revisions 15 through 18. The steam generator tubing eddy current examinations are discussed in Appendix A. Repairs and replacements are discussed in Appendix B. Pressure tests are discussed in Appendix C. The IWE metal containment evaluations are discussed in Appendix D. Examinations performed during this cycle satisfy the inspection requirements for the first outage of the third period of the second 10 year inspection interval as defined in the 0-SI-DXI-000-1 14.2.
(0 0(L
\\$
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH NICLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402.2801 SODDY DAISY, TENNESSEE 37384.2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED The Authorized Inspection Agency (AIA), Hartford Steam Boiler Inspection and Insurance Company of Connecticut (HSB CT), provided the following ANtis:
Michael Lockwood, Jim Myhan and Bruce Eamigh HSB CT 200 Ashford Center North, Suite 205 Atlanta, Georgia 30338-4860 Summary:
Unit 2 Cycle 12 was the first scheduled refueling outage during the third inspection period of the second Ten Year ISI interval. Class 1 and 2 components were examined in accordance with 0-SI-DXI-000-1 14.2, UASME Section Xl ISI/NDE Program Unit 1 and Unit 2". A summary listing of examinations performed for code credit are listed in SECTION 1. The examinations were performed to TVA approved procedures. The class 1 and 2 components examined and results for this inservice inspection outage are listed in SECTION 2. There was six notice of indications generated for ASME Section Xl, Class 1 and 2 examinations. See SECTION 3 for notice of indications summary. See SECTION 4 for additional samples summary. See SECTION 5 for the successive examinations summary. No regulatory required augmented examinations were performed which require submittal to the regulatory authority (Reference SECTION 6). There were no ASME Class 1, 2, or 3 equivalent components for which examination results required acceptance by analytical evaluation (IWB-3132.4, IWB-3142.4, IWC-3122.4, IWC-3132.4 or IWD-3000)
(Reference SECTION 7). There were three ISI components that did not receive the code required examination coverage (see SECTION 8).
For Unit 2 Cycle 12 steam generator tubing eddy current examinations results and number of tubes examined see Appendix A.
For repairs and replacements performed see Appendix B.
For Unit 2 Cycle 12 system pressure test results see Appendix C.
For Unit 2 Cycle 12 IWE metal containment evaluations see Appendix D.
7 o.C lAS
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH 200CLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402-2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED SECTION 1 EXAMINATION
SUMMARY
- Examination Credit Summary
- Examination Code Category and Item Number Summary 8q e~, IA5
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NJCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
The completion of examinations as required by the inspection plan for the first outage of the third period of the second interval is on schedule. The examination category and number of examinations for the second interval and the third period for the following summary are based on 0-SI-DXI-000-1 14.2 revision 19.
C oYpE 5
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH N..jCLEAR PLANT P.O. BOX 2000 SODDY DAISY,TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION XI EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL CATEGORY TOTAL TOTAL TOTAL TOTAL TOTAL EXCLUSIONS NUMBER NUMBER NUMBER NUMBER NUMBER EXCEPTIONS REQUIRED CREDITED REQUIRED CREDITED CREDITED OR FOR FOR THE FOR FOR THE FOR U2C12 DEFERRALS INTERVAL INTERVAL THIRD THIRD OF THE PERIOD PERIOD THIRD (U2C12 and (U2C12)
PERIOD U2C13)
B-A 14 1
13 0
Q deferral see note I permissible B-B 5
5 2
2 2
B-D 36 16 24 4
4 Code Case
___N
-521 B-E 115 0
115 0
0 deferral permissible B-F 22 (4) 4 N/A N/A N/A Code Case see notes 11 see note 11 see note 11 see note 11 see note 11 N-521 and 12 B-G-1 RV (216)
RV (144)
RV (72)
RV (0)
RV (0)
RCP (25) examination see note 10 performed B-G-2 PZR (1)
PZR (1)
SG (1)
SG (1)
SG (0)
SG (0) only when B-L-2 RCP (2)
RCP (2) examination Valves (6)
Valves (3)
Valves (3)
Valves (0)
Valves (0) performed Piping (13)
Piping (7)
Piping (6)
Piping(6)
Piping(6 )
B-H, see B-K of Code Case N-509 B-J 249 (79) 79 N/A N/A N/A see notes 7, see notes 8 see note 11 see note 11 see note 11 11 and 12 and 11
/0 o 4IA5
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH..jCLEAR PLANT P.O. BOX 2000 SODDY DAISY. TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION Xi EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL (continued)
CATEGORY TOTAL TOTAL TOTAL TOTAL TOTAL EXCLUSIONS NUMBER NUMBER NUMBER NUMBER NUMBER EXCEPTIONS REQUIRED CREDITED REQUIRED CREDITED CREDITED OR FOR FOR THE FOR FOR THE FOR U2C12 DEFERRALS INTERVAL INTERVAL THIRD THIRD OF THE PERIOD PERIOD THIRD (U2C12 and (U2C12)
PERIOD U2C13)
B-K-1, see B-K of Code Case N-509 B-K of 8
8 3
3 3
Code Case see notes 5 N-509 and 15 B-L-1 N/A B-L-2 1
1 0
0 0
deferral permissible:
examine only if pump disassembled B-M-1 N/A B-M-2 6
3 deferral Q
Q deferral permissible:
permissible:
examine examine only if valve only if valve disassembled disassembled B-N-1 Three -
1 -first period 1 each 1 -second period 1
0 0
_ period B-N-2 6
0 6
0 0
deferral permissible B-N-3 1
0 1
0 0
deferral I _permissible
// oq~ke$
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET.
CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH N.,CLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION Xl EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL (continued)
CATEGORY TOTAL TOTAL TOTAL TOTAL TOTAL EXCLUSIONS NUMBER NUMBER NUMBER NUMBER NUMBER EXCEPTIONS REQUIRED CREDITED REQUIRED CREDITED CREDITED OR FOR FOR THE FOR FOR THE FOR U2C12 DEFERRALS INTERVAL INTERVAL THIRD THIRD OF THE PERIOD PERIOD THIRD (U2C12 and (U2C12)
PERIOD U2C13)
B-O 2
0 2
0 0
deferral
_permissible B-P, see Appendix C B-Q, see Appendix A C-A 17 15 7
5 5
C-B 12 12 3
3 3
see note 13 see note 13 C-C see C-C of Code Case N-509 C-C of 29 17 12 5
5 Code Case N-509 C-D 1
1 0
0 0o -
C-F-1 148 (46) 46 N/A N/A N/A see notes 4, see notes 6 see note 11 see note 11 see note 11 9, 11 and 12 and 11 C-F-2 29 (9) 9 N/A N/A N/A see notes 11 see note 11 see note 11 see note 11 see note 11 and 12 I2 or (5S
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1.1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH "-CLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION Xi EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL (continued)
CATEGORY TOTAL TOTAL TOTAL TOTAL TOTAL EXCLUSIONS NUMBER NUMBER NUMBER NUMBER NUMBER EXCEPTIONS REQUIRED CREDITED REQUIRED CREDITED CREDITED OR FOR FOR THE FOR FOR THE FOR U2C12 DEFERRALS INTERVAL INTERVAL THIRD THIRD OF THE PERIOD PERIOD THIRD (U2C12 and (U2C12)
PERIOD U2C13)
C -G N /A_
C-H, see Appendix C F-A see F-A of Code Case N-491 F-Aof 201*
125 76 58 58 Code Case
- Class 1 and see notes 3 N-491 2 only and 14 see notes 2 and 16 R-A 69 37 23 14 14 R1.11(UT)
Elements see note 18 see notes 11 and 17 R-A 42 All each See See See R1.11 (V)
Segments refueling Appendix C Appendix C Appendix C see notes 11 outage and 21 R-A 25 All each See See See R1.12 Segments refueling Appendix C Appendix C Appendix C see notes 11 outage and 22 R-A N/A R1.13 R-A N/A R1.14 I
I I
13 o* 1as
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH i..CLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION Xi EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL (continued)
CATEGORY TOTAL TOTAL TOTAL TOTAL TOTAL EXCLUSIONS NUMBER NUMBER NUMBER NUMBER NUMBER EXCEPTIONS REQUIRED CREDITED REQUIRED CREDITED CREDITED OR FOR FOR THE FOR FOR THE FOR U2C12 DEFERRALS INTERVAL INTERVAL THIRD THIRD OF THE PERIOD PERIOD THIRD (U2C12 and (U2C12)
PERIOD U2C13)
R-A N/A R1.15 R-A 4 Elements 1
2 1
1 R1.16 see note 19 R-A N/A R1.17 R-A 8
As As As As R1.18 Segments scheduled scheduled scheduled scheduled see notes 11 in FAC in FAC in FAC in FAC and 20 program program program program (2 segments examined)
Notes:
- 1. Weld number W08-09A examination category B-A, item number B13.40 was credited in the first period because the period was extended per IWB-2412(b) as identified in 0-SI-DXI-000-114.2.
- 2. Modification (deletions of supports) in examination category F-A decreased total supports from 203 to 198 in U2C9.
- 3. Removed from credit seven supports in examination category F-A (2-RCH-027, 2-RCH-833, 2-SIH-005, 2-SIH-114, 2-SIH-115, 2-SIH-228 and 2-SIH-354) reported in U2C8.
- 4. Use of code paragraph IWC-1221(e) reduced the total from 151 to 147 for examination category C-F-1 reported in U2C8.
- 5. Removed from credit one integral attachment reported in the U2C7.
- 6. Removed from credit one weld (SIS-254) reported in U2C8.
ii 0, 1
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH NUCLEAR PLANT 1101 MARKETSTREET P.O. BOX 2000 CHATTANOOGA. TENNESSEE 37402-2801 SODDY DAISY. TENNESSEE 37384.2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION Xi EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL (continued)
- 7. Piping modification in the second period added 11 examination category B-J welds and increased the total number required for the interval from 238 to 249 in the U2C10 report.
- 8. Due to piping modifications in the second period and the increase in the total number of examinations required in examination category B-J for the interval, these welds were added over the three periods - (4) first, (2) second, (5) third. The 4 welds in the first period are counted for credit in the interval in the U2C10 report.
- 9. Due to piping modification in the second period the total number of examinations required for examination category C-F-1 increased by one weld for the interval from 147 to 148 in the U2C10 report.
- 10. Increased total number of examination category B-G-1 examinations for RCP from 24 to 25 in the U2C1 I report to include the examination of the RCP flange surface when the connection was disassembled.
- 11. The RI-ISI program was approved for the second and third periods for examination categories B-F, B-J, C-F-1, and C-F-2. The RI-ISI examinations are performed under examination category R-A Item Numbers R1.11, R1.12 and R1.18.
- 12. Only the first period examinations are required for code credit for this interval due to the approval of the RI-ISI program. The number in ( ) is the number required for the first period.
- 13. Examination category C-B, item number C2.21, residual heat removal heat exchanger, nozzle-to-vessel weld examination, will be used for the nozzle inside radius section examination, per request for relief 2-ISI-15. Added two welds to the total number credited for the interval. One weld was added in U2C1 1 report and one in U2C12 report.
- 14. Removed from credit one support (2-RCH-88) reported in U2C9 in the U2C11 report due to correction in support function.
- 15. Removed from credit one piping integrally welded attachment (2-CVCH-006-IA) reported in U2C9 report due to credit being taken for the PZR lugs in U2CI 1.
- 16. Increased total number of examination category F-A required for the interval from 198 to 201 in the U2C11 report.
iS 6~ 1
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH NUCLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402-2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED EXAMINATION CREDIT
SUMMARY
ASME SECTION XI EXAMINATIONS FOR THE FIRST OUTAGE (U2C12) OF THE THIRD PERIOD OF THE SECOND TEN-YEAR INSPECTION INTERVAL (continued)
- 17. Examination category R-A, item number R1.1 1 examinations for the second period was 69 and remained 69 after the periodic update in the U2C12 report.
- 18. Examination category R-A, item number R1.1 1 the number of welds credited in the second period was 23 welds.
- 19. Examination category R-A, item number R1.16 examinations for the second period was 0, but was revised by the periodic update to 4 in the U2C12 report.
- 20. Examination category R-A, item number R1.1 8 examinations for the second period was 16 segments, but was revised by the periodic update to 8 segments in U2C12 report.
- 21. Examination category R-A, item number R1.1 1 (VT-2) examinations for the second period was 64 segments, but was revised by the periodic update to 42 segments in U2C12 report
- 22. Examination category R-A, item number R1.12 examinations for the second period was 38 segments, but was revised by the periodic update to 25 segments in U2C12 report
/ 6 e' IA5
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
17 co* (AS
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, i982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION XI CREDIT UNIT 2 CYCLE 12 CLASS I COMPONENTS COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER Pressurizer Circumferential Shell-to-UT B-B B2.11 1
Head Weld Pressurizer Head to Intersecting UT B-B B2.12 1
Long Seam Weld Pressurizer Nozzle-to-Vessel Weld UT B-D B3.1I0 2
Pressurizer Nozzle Inside Radius UT B-D B3.120 2
section CVCS Piping Bolting VT-1 B-G-2 B7.50 2
RCS Piping Bolting VT-1 B-G-2 B7.50 2
SIS Piping Bolting VT-1 B-G-2 B7.50 2
CVCS Piping Support Integrally PT B-K B10.20 1
Welded attachments SIS Piping Support Integrally Welded PT B-K B10.20 2
attachments CVCS Class I Piping Support, VT-3 F-A F1.10A 4
Function A RCS Class 1 Piping Support, VT-3 F-A F1.10A 2
Function A l
SIS Class 1 Piping Support, VT-3 F-A F1.10A 2
Function A CVCS Class I Piping Support, VT-3 F-A F1.10B 8
Function B RCS Class I Piping Support, VT-3 F-A F1.10B 1
Function B RHRS Class I Piping Support, VT-3 F-A F1.10B 1
Function B
________I_
SIS Class 1 Piping Support, VT-3 F-A F1.10B 5
Function B I
/8 j: 45
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED I-.
EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION Xi CREDIT UNIT 2 CYCLE 12 CLASS I COMPONENTS (continued)
COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER RCS Class 1 Piping Support, VT-3 F-A F1.10C 2
Function C RX Class 1 Piping Support, VT-3 F-A F1.10C 1
Function C RCS Class 1 Piping Support, VT-3 F-A F1.10D 2
Function D RHRS Class 1 Piping Support, VT-3 F-A F1.10D 1
Function D SIS Class 1 Piping Support, VT-3 F-A F1.10D 1
Function D I
I I
/q df 4 5 AS
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION XI CREDIT UNIT 2 CYCLE 12 CLASS 2 COMPONENTS COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER Containment Spray Heat Exchanger UT C-A C1.10 1
Shell Circumferential Weld Seal Water Heat Exchanger PT C-A C1.10 1
Circumferential Weld Seal Water Heat Exchanger Head PT C-A C1.20 I
Circumferential Weld Centrifugal Charging Pump Tank UT C-A C1.20 1
Head Circumferential Weld Containment Spray Heat Exchanger UT C-A C1.30 1
Tube-sheet to Shell Weld Containment Spray Heat Exchanger MT/UT C-B C2.21 2
Nozzle Weld Centrifugal Charging Pump Tank MT/UT C-B 02.21 1
Nozzle Weld Containment Spray Heat Exchanger MT C-C C3.10 1
Class 2 Equipment Support Integrally Welded Attachment Centrifugal Charging Pump Tank MT C-C C3.10 1
Class 2 Equipment Support Integrally Welded Attachment SIS Piping Integrally Welded PT C-C C3.20 3
Attachments FWS Class 2 Piping Support, VT-3 F-A F1.20A -
1 Function A MSS Class 2 Piping Support, VT-3 F-A F1.20A 1
Function A SIS Class 2 Piping Support, VT-3 F-A F1.20A 6
Function A 20 oc 145
OWNER:
TENNESSEE VMLLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH viLCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION Xi CREDIT UNIT 2 CYCLE 12 CLASS 2 COMPONENTS (continued)
COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER MSS Class 2 Piping Support, VT-3 F-A F1.20B 1
Function B RHR Class 2 Piping Support, VT-3 F-A F1.20B 2
Function B SIS Class 2 Piping Support, VT-3 F-A F1.20B 8
Function B FWS Class 2 Piping Support, VT-3 F-A F1.20C 1
Function C MSS Class 2 Piping Support, VT-3 F-A F1.20C I
Function C MSS Class 2 Piping Support, VT-3 F-A F1.20D 1
Function D SIS Class 2 Piping Support, VT-3 F-A F1.20D 1
Function D Centrifugal Charging Pump Tank VT-3 F-A F1.40 1
Class 2 Equipment Support Containment Spray Heat Exchanger VT-3 F-A F1.40 1
Class 2 Equipment Support Containment Spray Pump Class 2 VT-3 F-A F1.40 I
Equipment Support Steam Generator Heat Exchanger VT-3 F-A F1.40 1
Class 2 Equipment Support RHRS Valve Class 2 Equipment VT-3 F-A F1.40 1
Support I
2 1 or 145
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION Xi CREDIT UNIT 2 CYCLE 12 CLASS I AND 2 RI-ISI COMPONENTS COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER CVCS Piping Welds UT R-A R1.1 1 4
RCS Piping Welds UT R-A R1.11 1
RHRS Piping Welds UT R-A R1.11 2
SIS Piping Welds UT R-A R1.11 7
SIS Piping Welds UT R-A R1.16 I
FWS FAC Piping Areas UT-THK R-A R1.18 2
2 2 42 [45
OWNER: TENNESSEEVALLEYAUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION Xi CREDIT UNIT 2 CYCLE 12 STEAM GENERATORS COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER TUBING
- ET B-Q B16.20
- See Appendix A for Summary of Steam Generator Tubing Eddy Current Examinations.
r 23 o 4-5
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NuCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION XI CREDIT UNIT 2 CYCLE 12 PRESSURE TESTS COMPONENT EXAM CODE CODE Sample METHOD CATEGORY ITEM NUMBER PRESSURE TEST
- V T
- See Appendix C for Summary of Pressure Tests.
124 or (45
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1.1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH..jCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED EXAMINATION CODE CATEGORY AND ITEM NUMBER
SUMMARY
ASME SECTION XI CREDIT UNIT 2 CYCLE 12 SUCCESSIVE EXAMINATIONS COMPONENTS COMPONENT EXAM CODE CODE TOTAL METHOD CATEGORY ITEM NUMBER NUMBER EXAMINED CVCS Class 1 Supports - Function B VT-3 F-A F1.10 1
RX Class 1 Supports-Function B VT-3 F-A F1.10B 1
25 or, 4(A
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 2 EXAMINATION PLAN (POST OUTAGE INSERVICE REPORT AND PRESERVICE REPORT) 24
(
145
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH..JCLEAR PLANT P.O. BOX 2000 x SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED This Section contains these standardized Post Outage Reports to satisfy the reporting requirements of IWA-6000 of the ASME Section Xl Code. These reports contain the inservice and preservice inspection data for Class I and 2 components defined in O-SI-DXI-000-114.2, UASME Section Xl ISI/NDE Program Unit 1 and Unit 2".
For Unit 2 Cycle 12 steam generator tubing eddy current examination results and number of tubes examined see Appendix A.
For Unit 2 Cycle 12 system pressure testing results see Appendix C.
27 d 145
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED POST OUTAGE INSERVICE REPORT 28 &3 (1-5
OWNER:
TENNESSEE VALLEY AUTIIORITY NUCLEAR POWER cROUP 1101 MARKET STREET CIIATTANOOCA,TENNESSEE 37402 EXAM1 REQUIREMIENT:
89E.02 UNIT: 2 CYCLE: 12 CON1U PLANT: SEQUOYAII NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37379 CERTIFICATION OF AUTIIOR17ATION: NOT REQUIRED O1ERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUNMBER FOR UNIT: NOT REQUIRED System Component Number ISO Drawing PZR WP-5 PZR WP-9 PZR RCW-18 PZR RCW-19 PZR RCW.18-IR PZR RCW.19-IR CVCS CVC.1 169-8C CVCS CVC-1236-BC RCS RCS-074-BC RCS RCS-107-5C SIS SI.1870-BC SIS SI-1925-BC CVCS 2-CVCH-006-IA O
SIS 2-SIH-020-IA SIS 2-SIH-164-4A CSS CSHXW-4-B CVCS SWHXW-2 CVCS SWHXW-1 SIS BIT-4 CSS CSHXW.3-0 CSS CSHXW-10 CSS CSHXW-1-B CSS CSIIXW-2.0 CSS CSHXW-2-B SIS BIT-2 SIS BIT-2 CSS CSHXH-B.1-tA SIS BITH-1-lA SIS 2-SIH-102-IA SIS 2-SIH-103-IA SIS 2-SIH-436-IA ISI-0306C-01 ISI-0396-"-0
[SI-0396-C-01 ISI-0396-C-01 ISI-0396-C-01 ISI-0396-C-01 MSG-0009-C-04 MSG-0008 -C-O5 ISI-0013-C-03 ISI-0013-C-03 ISI-0002-C-10 ISI-0002-C-1 1 MSG-0015-C-O1 MSG-0009-C-2 MSG-0009-C-07 ISI-0463-C-01 ISI-0461-C-01 ISI-0461-C-01 ISI-0074-C-01 ISI-0463-C-01 ISI-0463-C-0t ISI-0463-C-01 ISI.0463-C-01 ISI-0463-C-01 ISI-0074-C-01 ISI-0463-C-01 ISI-0074-C-01 ISI-0449-C.1 1 ISI-0449-C-10 ISI40449-C-39 Category Item Exam NDE Calibration Exam Exam Exam NOI Comments Number Scheduled Procedure Standard Date Report Results Number B-B 62.11 UT N-UT-19 SO-41 20031119 R-6596 Passed B-B B2.12 UT N-UT-19 SO-41 20031119 R-6593 Passed B-D B3.110 UT N-UT-19 BNP-79 20031120 R-6608 Passed 69.7% EXAM B-D B3.110 UT N-UT.19 BNP-79 20031120 R-6609 Passed 69.7% EXA)
B-D B3.120 UT N-UT-55 SO-77 20031120 R-6599 Passed B-D B3.120 UT N-UT-55 SO*77 20031120 R-6598 Passed B-G-2 B7.50 VT.1 N-VT-1 20031115 R-6580 Passed B5G-2 67.50 VT-1 N-VT-1 20031116 R-6530 Passed B.G-2 B7.50 VT-1 N-VT.1 20031119 R-6575 Passed B-G-2 B7.50 VT-1 N-VT-1 20031112 R-6509 Passed B-G-2 67.50 VT-I N-VT-I 20031116 R-6531 Passed B-G-2 B7.50 VT-1 N-VT.1 20031121 R-6583 Passed B-K B10.20 PT N-PT-9 20031111 R-6502 Passed B-K 610.20 PT N-PT-9 20031120 R-6579 Passed B-K 510.20 PT N-PT-9 20031123 R-6606 Passed C-A C1.10 UT N-UT-18 SO-107 20031027 R-6488 Passed C-A C1.10 PT N-PT-9 20031030 R-6492 Passed C-A C1.20 PT N-PT-9 20031030 R-6491 Passed C-A C1.20 UT N-UT-19 BNP-79 20031014 R-6465 Engineering 2-SO-362 C-A C1.30 UT N-UT-18 SO-106 20031027 R-6487 Passed C-B C2.21 MT N-MT-4 20031023 R-6467 Passed C-B C2.21 UT N-UT-18 SO-107 20031027 R-6591 Passed EXAMINE F C-n C2.21 MT N-MT-G 20031023 R-64C6 Passed C-B C2.21 UT N-UT-18 SO-107 20031027 R-6590 Passed EXAMINE F C-B C2.21 MT N-MT-S 20031017 R-6463 Passed C-B C2.21 UT N-UT.19 BNP-79 20031020 R-6470 Passed 75% EXAMII C.C C3.10 MT N-MT-6 20031024 R-6469 Passed C-C C3.10 MT N-MT-6 20031017 R-6462 Passed C-C C3.20 PT N-PT-9 20031122 R-6600 Passed C.C C3.20 PT N-PT-9 20031117 R-6554 Passed C-C C3.20 PT N-PT-9 20031122 R-6595 Passed AiINATION COVERAGE ACHIEVED AINATION COVERAGE ACHIEVED ROM ID & OD ROM ID & OD INATION COVERAGE ACHIEVED 01/2612004 NIS-I Page I
OWNER:
TENNESSEE VALLEY AUTHORITY NUCLEAR POWER GROUP 1101 MARKET STREET CHIATTANOOGA, TENNESSEE 37402 PLANT: SEQUOYAII NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37379 CERTIFICATION OF AUTIIORIZATION: NOT REQUIRED EXAM REQUIREMENT:
89E-02 UNIT: 2 CYCLE: 12 COMMNIERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED System Component ISO Category Item Exam NOE Calibration Exam Exam Exam NOI Comments Number Drawing Number Scheduled Procedure Standard Dale Report Results Number CVCS 2-CVCH-018 CVCS 2-CVCH-443 CVCS 2-CVCH-057 CVCS 2-CVCH-075 RCS 2-RCH-034 RCS 2-RCH-037 SIS 2-SIH-172 SIS 2-SIH-319 CVCS 2-CVCH-002 CVCS 2-CVCH-046 CVCS 2-CVCH-049 CVCS 2-CVCH-053 CVCS 2-CVCH-102 CVCS 2-CVCH-105 CVCS 2-CVCH-292 CVCS 2-CVCH-361 RCS 2-RCH-033 RHRS 2-SIH-806 SIS 2-RHRH-10 SIS 2-StH-151 SIS 2-SIH-207 SIS 2-SIH-214 SIS 2-SIH-3G4 RCS 2R11CII-005 MSG-0015-C-01 F-A MSG-00154-02 F-A MSG-0015-C-02 F-A MSG-0015-03 F-A MSG-0013-03 F-A MSG-0013-C-03 F-A MSG-0009-C-11 F-A MSG-M009-C-12 F-A MSG-0015-0l F-A MSG-0015-C-02 F-A MSG-0015-C-02 F-A MSG-0015C02 F-A MSG-0015-C-05 F-A MSG-0015-C-05 F-A MSG-0012-01 F-A MSG-0012-C-02 F-A MSG-0013-C-03 F-A MSG-0010-C-06 F-A MSG-099-C-12 F-A MSG-009-C-08 F-A MSG-0009-C-07 F-A MSG-0009-C-09 F-A MSG-0009-C-12 F-A MSC-0013-C-04 r-A F1.10A FIA10A F1AOAA FtIO0A F1.10A F1.10A FIAOAA F1.10A FIJ10B F1.10B F1.10B F1l10B F1.108 FtIO0B F1A101 FIAOB FMO10 F1.1013 FlAO01 FlA1013 FI.100 F1.100 FI.1013 171.10tC Vr-3 VT-3 VT-3 V`1-3 VT-3 VT-3 V`1-3 VT-3 Vr-3 VT-3 VT-3 VT-3 VT-3 VT-3 V'r-3 V'r-3 VT-3 VT-3 Vr-3 vT-3 VT-3 V`1-3 VT-3 VT-:'
N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-I N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-I N.VT-1 20031112 R-6514 Passed 20031119 R-6556 Passed 20031114 R-6527 Passed 20031119 R-6557 Passed 20031111 R-6500 Engineering 2-S0-365 20031111 R-6504 Passed 20031113 R-6522 Passed 20031113 R-6525 Passed 20031112 R-6515 Passed 20031119 R-6558 Passed 20031119 R-6559 Passed 20031112 R-6528 Passed 20031122 R-6601 Passed 20031119 R-6560 Passed 20031112 R-6513 Passed 20031113 R-6519 Passed 20031111 R-6501 Passed 20031116 R-6538 Passed 20031113 R-6524 Passed 20031113 R-6520 Passed 20031123 R-6604 Passed 20031115 R-6529 Passed 20031113 R-6523 Passed 20031112 1-ft510 Enghnooring 2-SO-3CG RANGE: 8-9 DMSIONS (ZERO ON THE SCALE IS CONSIDERED TO BE AT THE END OF THE SCALE WHERE THE TRAVEL STARTS).
20031111 R-6506 Passed RANGE: 126#-138# OR 564'-27164' 20031111 R-6508 Passed RANGE:6218N-6872#0R21132'1' RCS 2-RCH-864 RX 2-RCH-001 RCS 2-RCH-028 RCS 2-RCH-030 RHRS 2-RHRH-006 SIS 2-SIH-061 FWS 2-FDH-327 MSG-0014-C-01 F-A ISI-0302-C:01 F-A MSG-0013-C-03 F-A MSG-0013-C-03 F-A MSG-0010-C-01 F-A MSG-0009-C-05 F-A MSG-0016-C-01 F-A FI.10C Ft.1OC FIAOD FIAOD F1.10D F1.10D Ft.20A VT-3 VT-3 VT-3 VT-3 VT-3 VT-3 VT-3 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-I N-VT-1 N-VT-1 20031111 R-6503 Passed 20031111 R-6505 Passed 20031111 R-6507 Passed 20031118 R-6578 Passed 20031124 R-6613 Passed 01600NS-1*
Pag 2 01/2612004 NlS-I Page 2
OWVNER:
TENNESSEE VALLEY AUTIORITY NUCLEAR POWER GROUP 1101 MARKETSTREET CIIATTANOOCA,TENNESSEE 37402 EXAM REQUIREMENT:
89E-02 UNIT: 2 CYCLE: 12 COM.
PLANT: SEQUOYAI1 NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37379 CERTIFICATION OF AUTIIOR17ATION: NOT REQUIRED MIERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED System Component ISO Category Item Exam NDE Catbration Exam Exam Exam NOI Comments Number Drawing Number Scheduled Procedure Standard Date Report Results Number MSS 2-MSH-356 SIS 2-CVCH-505 SIS 2-SIH-62 SIS 2-SIH-292 SIS 2-SIH4-18 SIS 2-SIH465 SIS 2-SIH481 MSS 2-MSH-394 RHRS 2-SIH-394 RHRS 2-SIH-396 SIS 2-SIH-080 SIS 2-SIH-094 (A
SIS 2-SIH-103 SIS 2-SIH-281 SIS 2-SIH-326 SIS 2-SIH-329 StS 2-SIH402 SIS 2-SIH405 FWS 2-FDH-322 MSS 2-MSH-344 MSS 2-MSH-357 SIS 2-SIH-028 SG SGIM-I-2 CSS CSPH-A SIS BlTH-1 RHRS 2-RHRH-509 CVCS CVC-1169 CVCS CVCW-1057A CVCS CVCW-1091A CVCS CVCW-1236A MSG-0017-C-02 F-A ISl-0449-C-16 F-A ISI-0449-C-8 F-A ISI-0449-C-07 F-A ISI-0449-C-12 F-A ISI-0449-C-02 F-A ISI-0449-C-03 F-A MSG-0t7-C42 F-A MSG-0010-C-07 F-A MSG-0010-C-07 F-A ISI-0449-C-F-A ISI-0449-C-11 F-A ISI-0449-C-10 F-A ISI-0449-C-06 F-A ISI-0449-C-20 F-A ISI-0449-C.20 F-A ISI-0449-C-13 F-A ISI-0449-C-13 F-A MSG-0016-C-01 F-A F1.20A Ft.20A F1.20A FI.20A F1.20A Ft.20A FI.20A F1.2013 F1.203 F1.208 Fi.208 Ft.209 Ft.20B F1.20I3 F1.20B3 F1.2013 F 1.2013 F 1.200 F1.20C V`1-3 Vr-3 VT-3 VT-3 VT-3 VT-3 V`1-3 Vr-3 V`1-3 V`1-3 Vr-3 VT-3 V`1-3 VT-3 VT-3 VT-3 V`1-3 V`1-3 VT-3 N-VT-t N-VT-t N-VT-t N-VT-t N-VT-t N-VT-t N-VT-1 N-VTt-N-VT-i N-VT-1 N-VT-I N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 N-VT-1 20031122 R-6588 Passed 20031020 R-6464 Passed 20031118 R-6577 Passed 20031121 R-656 Passed 20031020 R-6460 Engineering 2-SO-361 20031028 R-6475 Passed 20031027 R-6476 Passed 20031124 R-6612 Passed 20031117 R-655t Passed 20031117 R-6552 Passed 20031123 R-6605 Passed 20031121 R-6587 Passed 20031119 R-6561 Passed 20031120 R-6581 Passed 20031120 R-6582 Passed 20031121 R-6584 Passed 20031029 R-6482 Passed 20031029 R-644 Passed 20031113 R-6517 Passed MSG-0017-C-02 F-A MSG-0017-C-02 F-A 1S5-0449-C-0o F-A ISI-046r.Z-01n r-A 1S5-0401-C-02 F-A ISI-0465-C-0O F-A ISI-0074-C-01 F-A MSG-0010-C-05 F-A MSG-0008-C-04 R-A MSG-008-C-01 R-A MSG-0008-C-02 R-A MSG-0008-C-05 R-A F1.20C F1.20D F 1.20D F-1.40)M r1.40E11 FI.40E3 F1.40E8 FI.40E9 R1.1I RI.11 1RI.1i R1.11 VT-3 VT-3 VT-3 VT-:
VT-3 VT-3 VT-3 VT-3 UT UT UT LUT N-VT-I N-VT-i N-Vt I N-VT-I N-VT-i N-VT-i N-VT-I N-VT-I N-UT-64 N-UT-64 N-UT-64 N-LT-64 20031116 R-6539 Passed 20031122 R-6576 EngineerIng 2-SO-370 20031120 R.6585 Passod 2M311023 MU.Mlnr Prasod 20031114 R4516I PassOd 20031029 R-6485 Passed 20031017 R-6461 Passed 20031029 R-6483 Passed S0-20 20031116 R-6572 Passed SO-20 20031116 R-6570 Passed SO-20 20031116 R-6571 Passed SO-20 20031116 R-6573 Passed RANGE: 8-9 DMSIONS (ZERO ON THE SCALE IS CONSIDERED TO BE AT THE END OF THE SCALE WHERE THE TRAVEL STARTS).
RANGE: 11024#-12184O0R41164%1 1116 RANGE: 297#-327# OR 39164-27132 012120 _I-
__a._
3 01/2612004 NIS-I Page 3
OWVNER:
TENNESSEE VALLEY AUTHIORITY NUCLEAR POWER GROUP 1101 MARKET STREET r2 rA Nfnh.
q'V. twr.r 1,.fn PLANT: SEQUOYAII NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37379 1A A
£a>UUt, I r 4nraarzr.
jIUL CERTIFICATION OF AUTIIOR17ATION: NOT REQUIRED EXAM REQUIREMENT:
89E.02 UNIT: 2 CYCLE: 12 COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED System Component Number ISO Drawing RCS RHRS RHRS SIS SIS SIS SIS SIS SIS SIS SIS FWS FWS RCS-049 RHRF-093 RHRS.198 SIF.038 SIF-062 SIF.131 StF*199 SIS-084 SIS.240 SIS.317 SIF.131 FW-00S SEGMENT FW-007 SEGMENT ISI-0013-C-01 tS!-0003-C-07 tSl-0(X)3-C-0 ISI-000-"-0 ISI-0431-C-03 ISI-000-C-04 ISI-0431-C.16 ISI-0431.C-12 IS14)002-C-05 ISI-000-C-7 ISI-0002C-04 FAC PROGRAM FAC PROGRAM Category Item Exam NDE Calibration Exam Exam Exam NO!
Comments Number Scheduled Procedure Standard Date Report Results Number R-A R1.11 UT N-UT44 SO-01 20031112 R-6511 Passed R-A R1.11 UT N-UT-64 S0-93 20031115 R-6549 Passed R-A R1.11 UT N-UT-64 SO-121 20031118 R-4574 Passed ALT-SS R-A RI.11 UT N-UT-64 SQ-116 20031030 R4495 Passed ALT-SS R-A R1.11 UT N-UT-64 sa-88 20031028 R-6489 Passed R-A R1.11 UT N-UT-64 SQ-38 S 20031113 R-4532 Passed R-A R1.11 UT N-UT-64 DNP-13 20031119 R-6594 Passed R-A R1.11 Ur N-UT-64 SO-121 20031024 R-6481 Passed ALT-SS R-A R1.11 UT N-UT-64 S0-38 20031115 R-6550 Passed R-A R1.11 UT N-UT-64 SO-01 20031115 R-6537 Passed R-A RI.16 UT N-UT-64 SQ-38 S 20031113 R-6532 Passed R-A R1.18 UT-THK N-UT-26 NIA 20031118 R-6562 Passed FIU-3.13 R-A RI.18 UT-TK N-UT-26 NIA 20031121 R-6589 Passed FILM 3.15 WA N
t'
__2 12 0 N_.
Pa_
01/26/2004 NIS-I Page 4
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED POST OUTAGE PRESERVICE REPORT 33 cAI'i$
OWNER:
TENNESSEE VALLEY AUTIORITY NUCLEAR POWER GROUP 1101 MARKET STREET CIIATTANOOCA,TENNESSEE 37402 EXAM REQUIREMENT:
P08-02 UNIT: 2 CYCLE: 12 COM PLANT: SEQUOYAII NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37379 CERTIFICATION OF AUTIIORIZATION: NOT REQUIRED MERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED System Component System Component Number RCP RCP3CSABLT-0I RCP RCP3CSABLT-02 RCP RCP3CSABLT-03 RCP RCP3CSABLT-04 RCP RCP3CSABLT-05 RCP RCP3CSABLT-06 RCP RCP3CSABLT-07 RCP RCP3CSABLT-08 RCS 2-RCH-034 RCS RCS-059A ISO Category Item Exam NDE Calibration Exam Exam Exam Drawing Number Scheduled Procedure Standard Date Report Results ISI-0307-C-01 8-0-2 B7.60 VT-1 N-VT-1 20031126 R-6615 Passed ISI-0307-C-01 B-G-2 87.60 VT.1 N-VT-1 20031126 R-6615 Passed ISt-0307-C41 B-G-2 87.60 VT-I N-VT-1 20031126 R-6615 Passed ISI-0307-C-01 B-G-2 07.60 VT-I N-VT-I 20031126 R-6615 Passed ISI-0307-C-01 B-G-2 07.60 VT-1 N-VT-i 20031126 R-6615 Passed ISI-0307-C-01 B-G-2 87.60 VT.1 N-VT-i 20031126 R-6615 Passed ISI-0307-C-01 B-G-2 B7.60 VT-1 N-VT-1 20031126 R-6615 Passed IS-0307-C-01 B-G-2 B7.60 VT-1 N-VT-1 20031126 R-6615 Passed MSG-0013-C-03 F-A F1.10A VT-3 N-VT-I 20031202 R-6616 Passed ISI-0013-C-03 R-A RI.11 UT N-UT-64 SO-116 20031123 R-6607 Passed NOI Comments Number ALT-SS w
Lf%
ij 01126/2004 NTS-1 Page 1 01/26/2004 MIS-1 I'age I
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NU..LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 3
SUMMARY
OF NOTIFICATION OF INDICATIONS 3.S 14 5
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRE[
PLANT: SEQUOYAH NuCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED
SUMMARY
OF NOTIFICATIONS The Unit 2 Cycle 12 Inservice Inspection of Class I and 2 components at Sequoyah Nuclear Plant included a total of six Notification of Indication (NOI) identified during inservice examinations. The following is a listing of the NOls and a brief summary of the corrective measures taken for each.
3(
cA oIe'14
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NU%;LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED
SUMMARY
NOTIFICATION OF INDICATIONS IDENTIFIED DURING INSERVICE EXAMINATIONS ON CLASS I AND 2 COMPONENTS NOI COMPONENT DISCREPANCY WORK ADDITIONAL NUMBER IDENTIFIER INSTRUCTION EXAMINATONS 2-SQ-361 2-SIH-418 Missing bolt and N/A No additional nut examinations (VT-3) required DISPOSITION: Acceptance by evaluation per code Case N-491-1 paragraph 3122.3.
2-SQ-362 BIT-4 Document flaw N/A No additional size examinations (UT) required DISPOSITION: Previous recorded flaw exceeded acceptance standard. Flaw size is essentially unchanged.
2-SQ-364 RCL-CLR-1 Loose bolting N/A No additional (VT-3) examinations required DISPOSITION: Acceptance by evaluation per code Case N-491-1 paragraph 3122.3.
2-SQ-365 2-RCH-034 Loose bolting 03-016517-000 No additional (VT-3) examinations I
_required DISPOSITION: Acceptance by evaluation per code Case N-491-1 paragraph 3122.3. Replaced bolting and preservice examination performed.
2-SQ-366 2-RCH-095 Loose bolting 03-016495-000 No additional (VT-3) examinations required DISPOSITION: Acceptance by evaluation per code Case N-491-1 paragraph 3122.3. Tighten bolting.
2-SQ-370 MSH-357 Loose bolting 03-017381-000 No additional l (Vr3) examinations I_
I I
required DISPOSITION: Acceptance by evaluation per code Case N-491-1 paragraph 3122.3. Tighten bolting.
3 7 4
\\45
l OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 4 ADDITIONAL SAMPLES 38 °'
-45
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1, i982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NvCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED ADDITIONAL SAMPLE
SUMMARY
There were no examinations requiring additional examinations for Unit 2 Cycle 12.
39 of i45
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE' JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH i..JCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 5 SUCCESSIVE EXAMINATIONS Hi 40 op I4S
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH Nh.LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SUCCESSIVE EXAMINATIONS COMPONENT CODE EXAM PROGRAM RESULTS CATEGORY METHOD O-SI-DXI[000-114.2 AND REFERENCE ITEM SECTION NUMBER II 2-CVCH-016 F-ANI1.I11OB VT-3 7.4.2.D Acceptable Note: This is the additional preservice examination required per Code Case N-491 paragraph -2220(b)
RCL-CLR-1 F-A/F11.1OB VT-3 7.4.2.D Acceptable Note: This is the additional preservice examination required per Code Case N-491 paragraph -2220(b) 41 as (d5
OWNER:
TENNFSSEE VALLEY AUrIIORITY NUCLEAR POWER GROVP 1101 MARKFTSTREET CIIATTANOOGA, TENNESSEE 37402 EXAM REQUIREMENT:
S02-02 UNIT: 2 CYCLE: 12 COM11 PLANT: SEQUOYAII NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37379 CERTIFICATION OF AUTIIORIZATION: NOT REQUIRED NIERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED System Component ISO Category Item Exam NDE Calibration Exam Exam Exam NOI Comments Number Drawing Number Scheduled Procedure Standard Date Report Results Number CVCS 2-CVCH-016 RX RCL-CLR.1 MSG-0015-C41 F-A ISI-0321-C01 F-A F1.100 VT-3 N-VT-1 F1.100 VT-3 N-VT-1 20031113 R-6518 20031110 R-6499 Passed Engineering 2-SO-364 N
I 0112612004 NIS-1 Page 1 01126/2004 NIS-1 Pngc I
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH N-CLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 6 AUGMENTED EXAMINATIONS 43 oA 145
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH N__LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384M2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED Augmented Examinations There were no augmented examinations performed during Unit 2 Cycle 12 as part of the Inservice Inspection Program, O-SI-DXI-000-114.2, that require submittal to the regulatory agency.
'4.4 0o~' i4 5
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET.
CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH N_ -LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 7 ANALYTICAL EVALUATIONS There were no acceptance by analytical evaluation assessments performed during Unit 2 Cycle 12 reporting period.
AS c~rpIA45
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH ti. -;LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED SECTION 8 REQUEST FOR RELIEF zt&or, 4 5
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH h__LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED During Unit 2 Cycle 12 there were two code class 1 and one code class 2 components that did not receive code required examination coverage due to design configuration, access limitations, etc. Requests for relief were submitted to the regulatory authority in accordance with 10 CFR 50.55a prior to Unit 2 Cycle 12 anticipating achieving a certain amount of examination coverage. The percentage of examination coverage was derived from methods established in the TVA NDE Procedures Manual. The following is a component summary.
REQUEST FOR RELIEF
SUMMARY
ASME SECTION Xl UNIT 2 CYCLE 12 CODE CLASS I AND 2 COMPONENT CODE CODE CODE EXAMINATION PERCENT CLASS CATEGORY ITEM METHOD COVERAGE NUMBER RCW-18 1
B-D B3.11Q UT 69.7%
Examination report R-6608. Examination is limited due to configuration of nozzle to pressurizer head geometry. Request for relief 2-ISI-19 was approved provided actual examination coverage was the same or greater than 69% examination coverage.
RCW-19 I 1 l B-D l B3.110 I UT l69.7%
Examination report R-6609. Examination is limited due to configuration of nozzle to pressurizer head geometry. Request for relief 2-ISI-19 was approved provided actual examination coverage was the same or greater than 69% examination coverage.
Examination report R-6470. Examination is limited due to configuration of nozzle to head geometry. Request for relief 2-ISI-17 was approved provided actual examination coverage was the same or greater than 67% examination coverage.
47 oF 145
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRI PLANT: SEQUOYAH N-.LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED APPENDIX A
SUMMARY
OF ASME SECTION Xl STEAM GENERATOR TUBING EXAMINATIONS The inspection plan work required for the first outage of the third period of the second interval for Code Category B-Q, item number B16.20 is on schedule.
The following table is a tabulation of examinations, results of examinations and corrective measures taken.
j 1i k-/ 11.".Itl,
PREPARED BY
-V l
.q v
(45
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH.- CLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED
SUMMARY
OF SEQUOYAH UNIT 2 CYCLE 12 SG EDDY CURRENT INSPECTION/TUBE PLUGGING RESULTS EDDY CURRENT EXAM TYPE SGI SG 2 SG 3 SG 4 Total Full Length Bobbin Coil Low Row U-Bend Plus Point High Row U-Bend Plus Point & MHI Top of Tubesheet Plus Point U-Bend Freespan Ding Plug Point AVB Ding Plug Point Freespan Plus Point H01 Plus Point H02 Plus Point H03 Plus Point H04 Plus Point H05 Plus Point H06 Plus Point H07 Plus Point C07 Plus Point Diagnostic/PID Plus Point 3321 345 803 3321 6
0 66 16 3
6 1
21 38 84 71 68 3246 328 1199 3246 12 2
81 17 1
1 1 3
8 5
23 18 109 3288 343 798 3288 4
1 52 30 3
1 2
2 9
93 67 124 3303 357 1206 3303 16 2
19 3
0 1
3 4
7 33 127 160 13158 1373 4006.
13158 38 5
218 66 7
19 9
35 59 233 283 461 Total Exams Completed 8170 3321 8309 8105 3246 3288 8544 33128 3303 13158 Total Tubes Examined INDICATIONS (Tubes)
AVB WEAR COLD LEG THINNING ODSCC HTS AXIAL ODSCC HTS CIRC ODSCC TSP AXIAL ODSCC SLUDGE PILE AXIAL PWSCC HTS AXIAL PWSCC HTS CIRC PWSCC TSP AXIAL PWSCC U-BEND AXIAL PWSCC U-BEND CIRC OTHER/PREVENTIVENVOLUMETRIC SG 1 SG2 SG3 SG4 Total 6
23 0
0 199 0
I 0
0 I
0 3
25 52 2
0 215 1
4 I
0 I
3 4
10 31 1
1 263 0
3 3
0 1° 0
3 8
47 6
I
-- -599 0
7 0
0 I
7 0
49 153 9
2 1276 1
9 4
0 4
10 10 Total 233 308 316 670 1527 L19 0C71
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET.
CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED
SUMMARY
OF SEQUOYAH UNIT 2 CYCLE 12 SG EDDY CURRENT INSPECTIONITUBE PLUGGING RESULTS PLUGGING STATUS SG I SG2 SG3 SG4 Total Previously Plugged Tubes 67 142 100 85 394 Damage Mechanism AVB WEAR COLD LEG THINNING ODSCC HTS AXIAL ODSCC HTS CIRC ODSCC TSP AXIAL ODSCC SLUDGE PILE AXIAL PREVENTATIVE PWSCC HTS AXIAL PWSCC HTS CIRC PWSCC U-BEND AXIAL PWSCC U-BEND CIRC 0
0 0
0 I
0 I
I 0
I 0
I 1
2 0
2 I
0 4
I I
3 0
0 I
1 5
0 0
3 3
1 0
0 2
6 I
8 0
0 I
0 I
.7 1
3 9
2 16 1
9 4
4 10 Plugged Cycle 12 4
16 14 26 60 TOTAL TUBES PLUGGED 71 158 Classification of Inspection Results Full Length Bobbin Coil U-Bend Plus Point & MHI Top of Tubesheet Plus Point Dented TSP Plus Point Dented Freespan Plus Point SG1 C-2 C-2 C-2 C-1 C-1 SG2 C-2 C-2 C-2 C-1 C-1 114 SG3 C-2 C-2 C-2 C-1 C-1 I11 454 SG4 C-3 C-2 C-2 C-1 C-1 Inspection Classificat ion Category Inspection Results C-1 Less than 5% of the total tubes Inspected are degraded tubes and none of the Inspected tubes are defective C-2 One or more tubes, but not more than 1% of the total tubes inspected are defective, or between 5 and 10% of the total tubes inspected are degraded tubes C-3 More than 10% of the total tubes inspected are degraded tubes or more than 1% of the inspected tubes are defective 6,C 6 ~: (4A$
l OWNER:
TENNESSEE VALIcY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1.1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH No- -EAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED Miscellaneous Nomenclature Notation AVB CL CIRC H01 H02 H03 H04 H05 H06 H07 HL HTS ODSCC PWSCC TSP Descritio n Anti-Vibration Bar Cold Leg Circumferential 1st Hot Support Plate 2nd Hot Support Plate 3rd Hot Support Plate 4th Hot Support Plate 5th Hot Support Plate 6th Hot Support Plate 7th Hot Support Plate Hot Leg Top of Tubesheet - Hot Leg Outer Diameter Stress Corrosion Cracking Primary Water Stress Corrosion Cracking Tube Support Plate
.6/ oD IeA5
OWNER: TENNESSEE VARY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH N-_.LEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED APPENDIX B FORM NIS-2 "OWNERS REPORT FOR REPAIRS OR REPLACEMENTS" PREPARED BY
( LI 5-oF 1i4 5
Owner: Tennessee Valley Authority 1101 Market Street Chattanooga, Tennessee 37402-2801 Plant: Sequoyah Nuclear Plant P.O. Box 2000 Soddy-Daisy, Tennessee 37384-2000 Plant: Unit 2 Owner Certificate of Authorization: Not Required Commercial Service Date:
June 1, 1982 National Board Number for the Unit: Not Required Sheet I
of 42.
Appendix B An index of the work documents which required reporting under the inclusion of the NIS-2 Report is as follows:
Work Order WO 99-012094-000 WO 00-000280-000 WO 00-003184-000 WO 01-008026-000 WO 01-008027-000 WO 02-005717-008 WO 02-005717-011 WO 02-005717-012 WO 02-005717-016 WO 02-005717-019 WO 02-005717-021 WO 02-005717022 WO 02-005717-023 WO 02-005717-024 WO 02-005717-025 WO 02-005717-033 WO 02-005717-034 WO 02-005717-035 WO 02-005717-036 Work Order WO 02-013335-000 WO 02-013876-000 WO 02-014438-000 WO 03-000868-000 WO 03-000895-000 WO 03-001026-001 WO 03-005912-000 WO 03-010030-000 WO 03-010161-000 WO 03-010162-000 WO 03-010248-000 WO 03-013570-000 WO 03-014817-000 WO 03-015457-000 WO 03-015525-000 WO 03-016177-000 WO 03-016517-000 r_-
g53 o (45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet Unit 12./-1 /o.3 L
of
+_
22 l o &c"--cos 8 4--CYoo)
Reoair Oroanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system
- CVIC5, C6t, 55 2
- 5. (a) Applicable Construction Code 19 jAd&Edition, c
Addenda,/,.4_
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufp.cturer Serial No.
Board Identification Built oReplacement (Yes or No)
No.
- 7. Description of Work p
L@C~
V4L vC
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 812 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
5T o-J4 5
FORM NIS-2 (Back)
- 9. Remarks
$rC.. 7 zu oJ 6 7 ZD#
7)2(&.7 cj1c2 4 4APPoGcape wallulw'.rer a UjdW r.epuIL to Ue P%'d~fle Ez-Sr2'-&- -C.
C---7a75i;&
A-4in e§7&,2S57-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this XtoCEst7'f conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of. uthori ation No.
NA Expiration Date Signed 2,
7 A
t\\AS t F-qt i EQ__
e0 or Owners DO.m'ree. Title NA
)ate 1 2-1 3 12'->..-
2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I o/31 /I 03 to a
/o and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions I-//
2 g'13 Inspector's Sign ure National Board, State, Province, and Endorsements Date per. /8, 2003 I.
.5f: 5
,A J4 5
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 11 01 MarKet Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date i O/f oI/ Oa-Sheet 3 Of 4
L Unit WL)
£ D /
o O
o Z..
No oec Reoair Oroansaiz-tn P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system go S, 67f.S I
- 5. (a) Applicable Construction Code SA -c 1 9 Edition, t4je'
- Addenda, A-J Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
No.
4Z-pCv--354-5 Liz~
__t
- 7. Description of Work j p
/ (;*7>
50 o y --rc
C-7:
- 8. Tests Conducted: Hydrostatic a Pneumatic O. ominal Operating Pressure 0 Other 0 Pressure egg psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
0 s4o-~ 45
i..-
FORM NIS-2 (Back)
- 9. Remarks at A~pocacie Manufacmufers Data kepons to De Anacned CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this 2e52f-l conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate of Authorization No.
NA Expiration Date Signed 1 1
/VIec H Gq Date Ownerr pr er's Designee. Title NA
/(:
OCE7-0,eC EZ.
2002 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut 1
have inspected the components described in this Owner's Report during the period 9/(>/0 to _______R_
A_______
and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or irnplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions
___1_
____?_
Inspector's Signature National Board, State, Province, and Endorsements Date QLAXrI;
- 3.
2002 5 -7 N-I -
- - - -
I r.
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date 10//Cc',2-Sheet 4-of 4z-Unit L-IcMd 04
-OO5OZ1O7-CCC, Reoair Orcaniz3:.cn P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Address Expiration Date N/A
- 4. Identification of system 2
t\\5 I
- 5. (a) Applicable Construction Code
- Edition, 3
- Addenda, J.
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identiflcation Fuilt or Replacement (Yes or No)
No.
==---EA i
24O
_&3A
'(es
- 7. Description of Work gr:ti a
-r 7,c)
§7-IL 5
L4
- 8. Tests Conducted: Hydrostatic 0 Pneumatic C}
ominal Operating Pressure a Other 0 Pressure psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/ in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
-5S -) - H45
FORM NIS-2 (Back)
- 9. Remarks
(
AppuicaDme manufacturers UaLa Reports to be ikaacned CERTIFICATE OF COMPLIANCE conforms to We certify that the statements made in the report are correct and this 2E'lT2 rnrnir nr rant -
-fla nani
~
JI W I v
G IcI IL the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of Authoriz tion No.
NA Expiration Date Signed
.6gV
/
I Date r
rwner's Designee. Title NA (0
D C-TcOOB 2002 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period q9Lb/ I to
/_____3___
_ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.
I J 7
Commissions Inspector's Signature Date
(,C 4A
/,'r National Board, State, Province, and Endorsements 2002 5c9 0n 1465
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Z // '72A3 Sheet 5 of 42-Unit
~2 M" 02 -CO 5?/ 7 -CX-,!
Reoair Oroanization P.O. NO.. JobD No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system MAg-, -1 r
- 5. (a) Applicable Construction Code Ig35,1ALUL 5 19 f,..4Edition, Addenda,,f\\jr..
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
/5, At'L-5*
-2(-
rJ Ati
-Id 0
N.
p 5.
- 7. Description of Work P-/ %,
c
-5 L4j3f51 S
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure o Other o Pressure
<OF psi TestTemp
- F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
650 oF I5
FORM NIS-2 (Back)
(-1 MsrI O*TV/cY, 6evt7b772aA CT (S3543)
- 9. Remarks
~Jul-,)
-- tVA
<p 'caPP e ManIaIutMacr1 3 Lata Kep<on3 III10 Joe acn0 ACH r-.1 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this CFACE/V'1ElQ conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate of Authoriza ion No.
NA Expiration Date Signed M Inr EC flM c*
Date Ownetr(or 04vner'sIDesignee. Title NA 1c5 LC lFfM &e2.-l2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period rI l/ 0 3 to 1!/8 103 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
AfA Commissions 7V 2Zr3 ate Enspector's Si2fiature TPec. {S.
National Board, State, Province, and Endorsements 2003 6a/
o-I 45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN. 37384-2000 Address Date
/2/i' i~S Sheet of 4-Unit Z
VOd, 0Z-D05717-ID Reosir Oroanizationl P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date N/A
- 4. Identification of system
/v"lp
" 5 iv 4,gj,/,
Ga :5 E
- 5. (a) Applicable Construction Code 5 19 g,,6Edition, i
- Addenda, r A Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identifica:i:n Built or Replacement (Yes or No)
No.
1 5:2 95(-
A (t&4T f4~5-1 S
'\\'t 1
=
)
I
_=
A-
, 4 >
_&~fi
=
=
=-
- 7. Description of Work PSN
&'tAD75D
,5
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure o Other o Pressure
/-
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
& Z 2-O -: 1 i5
FORM NIS-2 (Back)
- 9. Remarks eVsa'S e.,- G^J72AC 63-5-4) 9.74 D R mr Applicaole Manulacturers Uata heports to De ^4aUned An 1And 5c
/O/
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and thiswil?
e/I(6fiT conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of uthorizat' n No.
NA Expiration Date NA Signed 1.)
Il
=l(f( 626w Date FI5 C'i
'2 2003 i
OwnJ, pr Per's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford. Connecticut have inspected the components described in this Owner's Report during the period 115 to J
8/03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
nZ i
nb 2ffi2?Xmez Commissions IAJ2 5 Inspe or's Signaturos National Board, State, Province, and Endorsements D'te I
!2'C.
(3e 2003 2003 653 oP 5
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet __of 4-z Unit
(,-b4 O2-Co571-- cl /
Reoair Oroanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date NIA
- 4. Identification of system Go-trA/
nff0 S'Av M
A'
- 5. (a) Applicable Construction CodeA/.513351.-7 19 Lg7 Edition, Hit Addenda, &,eJ Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board
'dntification Built or Replacement (Yes or No)
C5 P5A 7
1_
k
_ hUicfW
)
inc/
M~~~~~~~~&
tase-AS( 5H t~9t 7.Decipin fWok2p5 qc, s
_____f M4 2qco5 C
^{
t4 I CS -
5
( 5 IAIlb Z0 2
- 7. Description of Work 2La/c -Ui §f51 0 E)C-7 S
GeCf.
1(Fa tAmfz~j) f3F2&(&TT ON
-HSG
- 8. Tests Conducted: Hydrostatic o Pneumatic Nominal Operating Pressure o Other o Pressure G
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8'2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
61
FORM NIS-2 (Back)
- 9. Remarks ta a
ob A4pplicao.e ManuartCurer's Uata tKepor~s to be Allacned CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this _____C6_______
repair or replacement the rules of the ASME Code, Section Xi.
conforms to Type Code Symbol Stamp NA Certificate of Authorization No.
NA Expiration Date NA Signed jQleX 7Ve,-
57 fi'?
Date 5
ot ye Own
,ner's Designee. Tile 50'&e-Z-2003 CERTIFICATE' OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owners Report during the period c? /
/I 3F -
to i I /7i/0 3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or. implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
,sA-,, MAf*
Commissions 2tI 6s3 National Board, State, Province, and Endorsements c 7 Inspector's'iignature Date
- Aohx, 7
2003 6 S
~.r 4
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date U/3 /L3 Sheet 6
of 4Z-Unit 2.
Rei Oroanzatio5 7O.7
-o.
o Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date N/A
- 4. Identification of system
- 5A4 r-TY-,
14 Ii c7-r,o-[
Z-
- 5. (a) Applicable Construction Code A451 B3J 7 19 &HEdition, -7jD
- Addenda, (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989
,_jt Code Case
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
~~N
- o.
2-Si I-45=3 3
Aj~-=
?C 3s LCD t 716l 4-
-'c t-tw _
I 4c rj- =
A =
=
=r
- 7. Description of Work agxLA ce47)
US; 3E_1jZ_
- 8. Tests Conducted: Hydrostatic o Pneumatic Nominal Operating Pressure o Other o Pressure Aj psi Test Temp _F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)
- 9. Remarks a3 Applicabe Manulacturera L ata Ideports 10 De ALtacae0 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this RXkAb: &1t7 repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA conforms to Certificate o Authoriz tion No.
NA Expiration Date Signed Owr or
,\\-I c I-I EMa6 r-Date Owr~r.Owner's designee, Title NA 3
AioYF,4-1,P56Z 2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 91/I8/o3 to
/.i/p /o3 3
and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
4?_______
Commissions 7o)J?653
(
f J
Inspector's Date tioi. 3.
s 5gnature National Board, State, Province, and Endorsements 2003
)
o.~ I'15
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet Q of 4f 2 Unit Z.
WCA
-O? CC'57/ 7-Q/o, Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A 2.
- 4. Identification of system C(IC f :5 CCI--55
- 5. (a) Applicable Construction Code Wf B31 7 19&e Edition, 71
- Addenda, (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989 4
Code Case
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
~N o.
f CVC.I-(-'S2
,u't-
,4-ax;_e-~c~
_1_7
`_
P 4 I _
by 2-c-m --
525g
-75cd 7_oo3
- 7. Description of Work pLAI' 2ACeAl 5Eaz
- 8. Tests Conducted: Hydrostatic a Pneumatic o Nominal Operating Pressure o Other o Pressure
/
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
000 0-:
lis
FORM NIS-2 (Back)
- 9. Remarks ApplicaDbe ManulacIurers Uata KeprtS so be AtLaCtlea CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ___________
repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA conforms to Certificate of Aut oriza n No.
NA Expiration Date Signed Ier esie
+ a1
/Z-Date
__ebo e'
Msge.T~
NA 3 A 1c 2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford. Connecticut have inspected the components described in this Owner's Report during the period IaLoa?
to AY 3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
(J -
,Inspecto s Signature Date Ahl. 3,
Commissions -7;) 2143 National Board, State, Province, and Endorsements 2003 (6
oF 14S
I s.
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority, Name 1 101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date I//5
/0 3 Sheet Iv of 42-Unit Z
, -C -- 00S7/ 7- 0 /9 Repair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date NIA
- 4. Identification of system 5 6C 7 L67 D C L i 5, ?
- 5. (a) Applicable Construction Code A.4s,3?, -
19 O Edition, 7LD Addenda,
^{J-Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturnr Serial No Board Identification Built or Replacement (yes or NO)
_ _ _ _'N o._
_-__-_,)
P5A
'542 146
?cL 2L Y
40
___=__
5-aeoc
- 7. Description of Work j2 -1L.A SU BS iIb~
- 8. Tests Conducted: Hydrostatic o Pneumatic Nominal Operating Pressure o Other a Pressure I
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8%2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
70 v.A ['5
FORM NIS-2 (Back)
- 9. Remarks ME-9sppca"De ManulaclUrers Uata Kepons to be At acnea CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this f 2
R5tACA4$'r conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate ofuhorizon No.
NA Expiration Date NA Signed I
-Aci V62 Date 5 /JV2v6 5f&
2 003 Ownfroe own-'b Design<n, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 9/17 /103 to li 10 3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or.implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- 4 /1 s Commissions T7I)2613 Inspector's gnature National Board, State, Province, and Endorsements Date Am v. 7-2003
/
71 a
t 4S
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Date
/c Am /cn 1101Markt
- Steet, Name 14?
1 01 Market Street, Chattanooga, TN 37402-2801 Sheet l
of Address
- 2. Plant Sequoyah Nuclear Plant Unit P.O. Box 2000,Name
~c5'~
P. O. Box 2000, Soddy-Daisy, TN, 37384-2000 I9L)-
2-a 57/ 7-1 E
Address Reoair Orcanizaion P.O. No.. Job No.. etc.
- 3. Work Performed by Sequoyah Nuclear Plant Type Code Symbol Stamp N/A Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Authorization No NIA Address Expiration Date NIA
- 4. Identification of system COV6 5, CL
-I Ag5 2 AN q
- 5. (a) Applicable Construction Code 51 8,t3 _-7 19 6 9 Edition, 7s Addenda, &J.j-Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufactu'rrv Serial No.
Board Identification Built or Replacement (Yes or No)
~~~No.
I Ftfv 532 1
7 A7ceJ Z-CVC(4-I--4 4-240 ptCSACAN
\\
\\
\\
2,epL P)
\\
\\
_2-i (A A-r 7-e g
(:<14-413 A sg te>X^s
_:3__
I cc 53 1
_ _cZ s
(1A4-T e
- 7. Description of Work j
C
- 8. Tests Conducted: Hydrostatic o Pneum ic o Nominal Operating Pressure o Other o Pressure Mi psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
7Z or-145
FORM NIS-2 (Back)
- 9. Remarks Go ADncaD~e Manulact-rr. Data Ke1oors to De bALche-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this 2F-aAC4Ak6-Cit conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificateof uthorization No.
NA Expiratior Signed 3/4of
\\,
m{
c -\\
rz-i Date NA Date (0
g o
2003 0.-n ~rwnews besigce Ttl CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components'described in this Owner's Report during the period
%/2 L/i3 to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore,.
neither the inspector nor his employer shall b? liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
"-+",I.
f, If, If I-A Al Commissions iU' 2i ?3 1s1 -& -e, -p -I n,,1 rag
^
Ad-Inspector's Sig6ature Iat l2 /9 6
fe- -0 NduUIdIal DucilU, State, Province, and Endorsements 2003 I
~~ 7 73 ocvi M S
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date ti-/& (v-5 Sheet L-of
, Unit 2-WLO& O1-OO57t17 -bZ-(
Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date N/A
- 4. Identification of system avs5Ag s
- 5. (a) Applicable Construction Code N5(,5 (,719 A
- Edition, 7
- Addenda,
- Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Cernponent Manufacturer Serial No..
Board Identificaticn Built or Replacement (Yes or No) 12 55 1 Z 0
an2 c6-C o
- 7. Description of Work '
54 u'3fACT
- 8. Tests Conducted: Hydrostatic a Pneumatic
/Nominal Operating Pressure o Other a Pressure psi Test Temp _F NOTE:
Supplemental sheets in form of lists, sketches, ordrawngs may be used, provided (1) size is 8Y/ in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
7AC>~ 4 S
FORM NIS-2 (Back)
- 9. Remarks
\\iA-I
/%opplicao.e Manulacturer3 Uata Kepons to De AL~acored CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this (
7 conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certifi categAythorition No.
NA Expiration Date Signed G
- odL, mA uA\\I gF,\\4 '-
Date NA (O ?
or EEt.
2003 ov*& or/)wners Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected. the components described in this Owner's Report during the period i /Uo /03 to i a / /o3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or.implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
mh-X9,14W Commissions 7______3
(
ate inspector's $ignature
-)ec. 9,T National Board, State, Province, and Endorsements 2003 75 0-14 q5
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date I! /c-
/oS Sheet (5 of
/k Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Unit 2Z k(Lh O 2-6O571 7-O2z-Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No NIA Expiration Date NIA Address
- 4. Identification of system Sir:X
.b"-u Cc:T10r-4
- L'.
- 5. (a) Applicable Construction Code A_5ff r3a,719 &c)Edition,
-7
- Addenda, A..4 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
.o.
1O(9
~~
~
1(
71
/
_/
gC.r/
jj03 j
IC (2~At,;-i2Ac 2-SIPh --7 &
3 90L. 6 sficE71
\\-(V Z
(c9)31
\\
fecACEI
/_____4_ I-2'54 2-S,f lQ&
- 5lf, l-V e9 ro (8*C-i~~7341 A~C,.
- 7. Description of Work 012' V
-f5 2U
- 8. Tests Conducted: Hydrostatico Pneumatr c o Nominal Operating Pressure o Other o Pressure (\\M psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8/z in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
- 76 oA (A5
FORM NIS-2 (Back)
- 9. Remarks tM kf Applicsoie Manufatcurers Uata heports to be AmacneO CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this [2E conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate ofAuthorization No.
NA Expiration Date Signed
[(4fi\\
f
(
g f1---CniQ Date NA
& ADc G/.~er:
2003 Owari wner's Designee. Title I
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period to i/
O3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed oc implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector por his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
A~ffi1/. tv.e>W.H Commissions TA) Z,93 National Board, State, Province, and Endorsements
(
Inspector's'Sign/ture Webeer ;,l 2003 I
77 o-P lS
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date i_
S Sheet of AZ,-
Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Unit Z'
t/6D*O-&OD57 l7-ca Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoair Ornanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Address Expiration Date NIA
- 4. Identification of system SP-jF#
1f 4 1 C-C7T ot-
,4 CLI S
A Pp-c [DL
- 5. (a) Applicable Construction Codeu5f 1553, 7 19 6,5Edition, -7 Addenda, Age-Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No) 2 -5sa-4 P5q3 (__
A1?
(J'P eCAg (35 4-3
/~
/_ _ rn 2~_
Z
£ )0 s/_\\\\Eue 72-51H)15 Coo
\\
I__
1 3
2.f &
_ I___r p]L2; L,, tf l :
l
.1
- 7. Description of Work '2ACOC) AH.1e2
- 8. Tests Conducted: Hydrostatic o Pneumatic
'Nominal Operating Pressure o Other o Pressure i-4/
psi TestTemp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 82 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
78 aF ('15
FORM NIS-2 (Back)
- 9. Remarks kM ulb Applicaoie Manufacturers U~ata KreporIz to Ioa ila~tneU CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this'R 2C~A-6a l T repair or replacement the rules of the ASME Code, Section Xi.
conforms to Type Code Symbol Stamp NA Certificate AuthorItion No.
NA Expiration Date 0
6n L D
Date Ore-i'<wnrsDesignee. Title-NA
! - D ac7 &
2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period q /9 /103 to I Z/016 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or. implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector rnr his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
A P
S A t,111"it44 Commissions
/ Al ZLo93 National Board, State, Province, and Endorsements Y 2 Inspector's Sigapture
\\e9te i 2003 7' a ex45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date I Y-/c-1C'5 Sheet i('
of' 4 Unit 2.-
WcFW ( 2 -
0,0 671J 7 - t3 Z'e Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system rSjL'r/
E-c,-(
/6L 1 -
( 4i' L
- 5. (a) Applicable Construction CodeA44,J1 6-51, 7 19 &gEdition, 7 C
- Addenda,
,J, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components l I Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
-5 Z l-23 P5A 66 p34-P-u-4-2p~e N
rkAM
- 12.
4 f
Cce go
~
__I
- 7. Description of Work 12rtLA Cr:
S51l U55b2 8. Tests Conducted: Hydrostatic o Pneumatic Nominal Operating Pressure o Other o Pressure psi Test Temp
°F NOTE:
Supplemental sheets in form of lists, s etches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
go 0-14 5
FORM NIS-2 (Back)
- 9. Remarks NtA Aoo-hca be M-A-naczuers Uaza Heqols lo be Ah acie0 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this (. epA6CE51t6 T
conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate of Authorization No.
NA Expiration Date NA Signed
_2___t___A, AAC-Date &f TF-g6 2003 Ownfr or 91mer's Designee, Tide
. CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period i
0 3 to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or. implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions 77L) Z6 3 K
Inspector's Si`fiature Ci/t 7 r
e t i>
National Board, State, Province, and Endorsements 2003 1 I / o0
~:('4I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date II b
/c) 3 Sheet i(c2 of Unit 2
4-i Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Address Expiration Date N/A
- 4. Identification of system 3* mB, C6L A$S 2
- 5. (a) Applicable Construction Code A Isf i53,,719 Edition,
-7o Addenda, AfA Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components l
- Repaired, ASME Code Name of Name of Manufacturer National her Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
- 2.
__c y7 6 J
/\\,-
? o 9 a Io
.7
_A__
.3.
-.3.-
I.
1
.3.
- 7. Description of Work 12{cp.L A c6,)j S_4Va P)E'
- 8. Tests Conducted: Hydrostatic o Pneumati }
Nominal Other o Pressure psi Operating Pressure o Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
o-1'4 5
FORM NIS-2 (Back)
- 9. Remarks Appiicaie Manulactufers Uata epots to be AtUacned CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ____C____________
conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of Aut orizat n No.
NA Expiration Date NA Signed 7 W\\A f\\ECJ1 F67-2_ Date 19 /\\/F^£8 22003 ODwnyor Opner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period _
/1 5 /03 to 1 (/2z/03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or-implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
{z~iM 7{jRCommissions
/J ZbZ3 Inspect s Signature National Board, State, Province, and Endorsements Date AJLOVl 24, 2003
.ornV-I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date r
Sheet I I of 44-2 Unit Z
I&A L) 41 02 - (>5-7 / --7_024 Recair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A
- 4. Identification of system Expiration Date N/A
(-:4135 0-
- 5. (a) Applicable Construction Code AAd.51 15317 19 69 Edition, 7~
- Addenda, (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989 N-JA Code Case
- 6. Identification of Components Repaired or Replaced and Replacement Components I
Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
N o.
2 R-f-2O3 2o 1 N.c
.gN J
ol:
irQ-FOH-24-3 1I-FQ-2S3 5c7a lo
~ '
_\\\\ -\\ c<
7 Z 'r 4-2 3
_ e p L C U er~
l ?ze e
_T~r
- 7. Description of Work I
larval Ar-Fn
- 1 tjf)FP-)fe-'f2 -.
- 8. Tests Conducted: Hydrostatic o Pneumatic o/
Nominal Operating Pressure o Other o Pressure
/pJ psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
o:
(4 5
FORM NIS-2 (Back)
- 9. Remarks tr AppicabIe Manufaclurer a ua'a t{eports to De ^;;acrneQ CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this i conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate of Autho zation No.
NA Expiration Date Signed I,)
,cI E*
1 Date Oier owner's Designee, Tite NA 6o DfECLA&L-2 003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period
' kayo 3 to I/ ?4/0
- and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.
fAg
/?-;441 Commissions MJ 2(4, e
Inspector's Sig'ature Dec. q.
National Board, State, Province, and Endorsements 2003 I
SP as; \\45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date
(//f C) /
Address
- 2. Plant Sequoyah Nuclear Plant Name P. O. Box 2000, Soddy-Daisy, TN, 37384-2000 Sheet
/ g) of 4-2, Unit JOC2-c5S7, 7-!2-5 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoai Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date NIA
- Address
- 4. Identification of system
/:2.C3 6 A _ cc
/
- 5. (a) Applicable Construction Code
-5j 1 l 9.o Edition, 17-7
- Addenda, (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989 o14 Code Case
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped ComponeLnt Manufacturer Seal No.
Board Identification Built or Replacement (Yes or No)
N o.
2-er i- -
93 P5A-
-3
°
- t jZ 3
X$>-
/e-33 P
< 14___
O3 r
2AtC}
o
-126H89 t4-5-7taH fse
_A_7 'R1_
a id R
2_
7.5y D7t ofA Wor5 (24eCe1 d
- 7. Description of Work 1 p co 5 o
~
- 8. Tests Conducted: Hydrostatic o Pneumati Nominal Operating Pressure a Other o Pressure B
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
o0.
(45
FORM NIS-2 (Back)
- 9. Remarks fa Ana~nn.
anl~turrs& a~aH~f
-15 WRAt
-C CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this z.
C.r conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate Signed l:
No.
NA Expiration Date NA Date 1
6\\~'45-Ž 2 0 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 9/Z0/co3 to I i/?- '3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
~-044eo-1k-*1,W~
Commissions SJ 6 3 National Board, State, Province, and Endorsements
(
)
Inspector's Signature Date IvOy, ?4, 2003 145
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date
/1/2 3 /D 3 Sheet IC) of 7 L Unit Z
I1ALj 0 cc.
-7/ 7-035 Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system Ar-7.-,
g FT
- 5. (a)ApplicableConstructionCode A
S 133/.719 (-a)Edition, 7c..'
- Addenda, pj46 CodeCase (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer
. Serial No.
Board Identification Built or Replacement (Yes or No)
N o.
2 -ADS -A5-P 5/
/L5t$
Hz 5 'pi>C
]
Ho
______z f4 2623 fzpAcE A & c
- 7. Description of Work Legacy
,S 6Z-.
- 8. Tests Conducted: Hydrostatic o Pneumagti, Nominal Operating Pressure a Other o Pressure H
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
6i o-c (45
FORM NIS-2 (Back)
- 9. Remarks
(\\/,
ApphicaDie Manulacturers Uata Kepofts lo be Aaacned CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this a-tgfA'l repair or replacement the rules of the ASME Code, Section Xi.
conforms to Type Code Symbol Stamp NA Certificate of Authorization No.
NA Expiration Date Signed
,CI/Ect B1e,V%-
_______Ownd.er'Dwier's Designee. Title NA
)ate I 5 A-'iS2.
2003 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I! - I to I I 2-4 -o3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or-implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
(
- Rf X
0A C
1i Inspector' Signature Date lyt/, 2 4, ommissions 77i 2W3 National Board, State, Province, and Endorsements 2003
. 69 oe 14+
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date Ui/2'SA(03 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Sheet 2 0 Of 4o Unit 2
1i;J oZ-cC)57( 7-o31 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoair Orcanization P.O. No.. Job No. etc.
Type Code Symbol Stamp N/A Authorization No NIA Address Expiration Date N/A
- 4. Identification of system MA/
4 j
S-eVX CT A S 5 2.
- 5. (a) Applicable Construction Code Ad3/8133/-7 19 &1 Edition,
-7=
Addenda, JA\\
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Boar.
Identification Built or Replacement (Yes or No)
~~~ ~~No.
/C)37c ta-t
_I i__ _ __
___________X___________
- 7. Description of Work feEactr 5A/ LS 2 B. Tests Conducted: Hydrostatic a Pneumatic Nominal Operating Pressure o Other o Pressure psi Test Temp OF NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
?0 7
c o o
-5
FORM NIS-2 (Back)
- 9. Remarks kh-AppilcaoIe Manulacturers Uata Keporas to be Aulacied CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this 9,/26nC6;A6'..1T conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate of Authoriz ion No.
NA Expiration Date NA Signed &c(/0-IA (GUNCZ 1
Date
- /+
O__ _0 -
wner's Designee. Title 552-2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period LI /z/I 3 to I/A08/03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or. implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
(
Inspectdges Signature Date Wi ecf i L Commissions 77V2?6'3 National Board, State, Province, and Endorsements 2003 9/ d& 1 e45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date Sheet Unit 12-f? 2-/L)3 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 2-I1 of 4-2, klo cb Z -00 57 1 7-35 Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No NIA Address Expiration Date N/A
- 4. Identification of system 616 5,I gr a
- 5. (a) Applicable Construction Code A4,51 5r3l. 7 19 C Edition, 7c_
- Addenda, fly. Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Compcr.nrtt Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
~~ ~~No.
2-ovcuV-4(3 z
4 rC~3;-p 5i_~
c
.A A-f-
/\\1O
- 7. Description of Work f 2 Qf:
4LACeD
[A/4A,2C 7317Fx C
eCj-I\\/1 °CLT,,
- 8. Tests Conducted: Hydrostatic a Pn9ujtico Nominal Operating Pressure c Other o Pressure
'4 psi Test Temp _F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
rfZ on
FORM NIS-2 (Back)
- 9. Remarks Appilcaoe Manufacturers Uata reports lo be Aiiacned CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this 22 2Sf Cetri (s.L T conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate of uthonizon No.
NA Expiration Date Signed clew
, Nr CH
\\61 4
[
Omhrswner's Designee, Title NA
)ate _I1 D=-1.--6Pt0Z203 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 11/Z 3 /5 to 1Z/1i z23. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or.implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
A nvi"
- 4171, Commissions Inspector's ignature National Board, State, Province, and Endorsements ate
)ec. / SO 2003 c3 o6
)45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet
, ?-. of 42--
Unit 2
W2-71 Ra r
- i.
.o Reoair Orcanization P. O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No NIA Expiration Date N/A
- 4. Identification of system
__-y l'{j C77 C)-
a a.
- 5. (a) Applicable Construction Code A
- 633, 19 bqEdition, G7o
- Addenda, f,,(A-. Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
No..
- 1.
1 _ _ _ _ _ _ _ _ _
I I._
_ 1 _
- 7. Description of Work W AC @>
L),(~zi n
-L-ck q P\\3 r-
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure o Other o Pressure
/
psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
CM 0-l
\\45
FORM NIS-2 (Back)
- 9. Remarks GI CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ¶ F2.ACteAAe?4 T conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate of Authorizani No.
NA Expiration Date NA Signed PAE-, -
f616AT.o Date lS,
<a C-f38T2-2003 Owner # Owir-s Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford. Connecticut have inspected the components described in this Owner's Report during the period iZ//
to z /
and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
):
Commissions Z-'2 3 D
Date Inspector's Signature 7ec. /SK National Board, State, Province, and Endorsements 2003 o.s 0 : jef $
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee 1101 Market Street, Valley Authority Name Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date 1 /1 /ce Sheet
. 5 of 4Z-Unit f.
W
?C'(
c(335CQc Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No NIA Expiration Date N/A
- 4. Identification of system 12.5, I
4w,
- 5. (a) Applicable Construction Code
-1.C 19 4 Edition, S-74
- Addenda, Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
No.
J ~ L C C r J
'flc -
Sc3 2._
O,03 Hlalwcm Tut 2.11
- 7. Description ofWork C
5 3L A-'-et or
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp
°F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
q&
OF I1.5
FORM NIS-2 (Back)
- 9. Remarks Mkc App,.cabie Manulacturer s LUala heports to be HAacneo CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this7Fia~CzAAe^^ mv'f~
conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA CertificateofAuthoriz ion No.
NA Expiration Date NA Signed ]
W
,M r'
A A
AlC 4
I?-2 Date
-7 le(L>(
2004 Ownqt or Opirner's Designee. Title I
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 61 I -03 to d i -,07-et and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
AT 111zet4 Commissions 7/A ZbV3
(
Date Inspector'sgignature Ja1,J. 07, National Board, State, Province, and Endorsements 2004 c7 6-145s
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- I
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date i 2 h (,
Sheet g4 of Unit 2-VJC+02 C/37'7Z-Reoair Oroanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No NIA Expiration Date N/A
- 4. Identification of system
-VC '52,
(_+L..\\
a, '
- 5. (a) Applicable Construction Code 19 19 A Edition, gjea Addenda, 4-Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
_ _ _ _ _ A _ _ _ _ _ _
N o.
PV_
\\
_4
=
=_
_ __ _ _1 --
_ I
_I I
_ I
=
- 7. Description of Work 12.\\e-A C)
\\/Dt\\e
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp
°F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
'~ 0-F I i
FORM NIS-2 (Back)
- 9. Remarks J
9 eppsicaome Manutactucers Uata Reports to be o;Ltawed CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this EJ'.C conforms to redpair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate 9fAuthorintion No.
NA Expiration Date NA Signed IV ec 12 Date i
1 2003 wnr orOwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford. Connecticut have inspected the components described in this Owner's Report during the period I I/Z Z/63 to z
and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
imps//. 4 z
Commissions 7/U
/3 U
Inspectori Signature National Board, State, Province, and Endorsements Date 722n Z0,>
2003 q90 on1 14.5
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Date
( 2 4c~~
Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Sheet -Z5 of Unit
/aL
,4 Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system
/Ne-
<tS 2-
- 5. (a) Applicable Construction Code
{
19 f 4
- kEdition, t+_ Addenda, (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989 Code Case 1
cam C.A =-
H_ &
16^
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
N o.
N,1104,t\\F44 4t MTco f
_I
=__
_ _ _ _-e_,_
_I_
1_
__9 1 2___
T-le r
- 7. Description of Work C6,qCŽ,
VALVE 16 2 e xAC.E-4D--
iL-5I6AEL' --FT 4 &I It A -
7-(:G-3-19O?0
-st A
e m
2-Fr--
3 -1170
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure r Other o Pressure psi Test Temp
°F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/OC) o 145
FORM NIS-2 (Back)
- 9. Remarks 4cNJua (W C,00
- ~
Aplc~abge Manufactrers uata Kepors to be i zachel P'm SO 4V51,1 {Aqm cr\\p 111
~MAZDAU t52~1 A
n>
r roge plaza ByN,a A,4rp ;o44 LIco 0
cs CERTIFICATE OF COMPLIANCE A Y=
We certify that the statements made in the report are correct and this 6
4I7i (T
conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of uthoriz ion No.
NA Expiration Date NA Sgned M e
'X, N/Y.L't (Fr% w-.
Date 1lF)
'-iI>F-;2-2OO3 Ownd or er's Designee, TiMe CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I
to 51/x z/o4 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions iA-I 2 3 J
InspectoA Signature National Board, State, Province, and Endorsements Date 7,V. / Z, 2-o4
/c)/
ex 145
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date
///7 A Sheet R CR of Unit 2
_4-2 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoair Ornanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A Address
- 4. Identification of system C% y K-1 f) -z;-n Z
- 5. (a) Applicable Construction Code A K -5 19,dEdition, ja
- Addenda, g
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufactt'rer Serial No.
Board Identification Built or Replacement (Yes or No)
~~ ~~No.
r (1
__30 k40-ti-11
-6 I
AnR&E Atcc
<f~
Ak j4 '?G 'XŽ3 "5
i fC~(
- 7. Description of Work 02ErACFD L.V-ie
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure 'a Other o Pressure psi Test Temp
- F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81 2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/0o2 c_0F (4 5
FORM NIS-2 (Back)
- 9. Remarks (r&v5viŽ L-2U o4l (6i.E :
C 2i6FC7 CD e
II -Dge M-1U dC-r-U-.d
~ --
[I
-^P Uplcdie Manulcacurer
(
ua3a neport to De ^
14wF10U
$an p4 U
6Zo~7c?793 And
(&,7& 75-7 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this l.EcA~cI-ot67 g conforms to r6pair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate I Asithoriz ion No.
NA Expiration Date O~wn r or twner's Denignee. Title NA Date
- 11) DCC C -AAQL%,t..2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 10/31/03 to I2/05A 03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
,-zg7.
ZI!,X Commissions 7tJ Z6' 3 Date Inspector's Sigr¶ature e C, '9, National Board, State, Province, and Endorsements 2003 o3 asc 145
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Date I'he Sheet 0o° t2F1 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Unit 2?
Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000
?4L0 O3-C'c)3sS -CX0 Reoair Orcanizaton P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A Address
- 4. Identification of system
/21/)? I CL A 5-5
- 5. (a) Applicable Construction Code 19 MiaEdition,
{
- Addenda, 4
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component
.Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
_ _ _ _ _N o._
- 5 6r 5IC;?Ln8C)L,
£ 9L A f
L_
_ 4 i - Z ' r D r
______________I
=___________________
====___________________
_______________I_________________==__________
_______________I___________
____l_____________
____= ________
- 7. Description of Work
_ACIC VALuV&
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure a-Other o Pressure psi Test Temp _F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/0 I O-P 1 4
FORM NIS-2 (Back)
- 9. Remarks C&4-A5C(?LK4,c.>
6?c)ce
- IY1TMA C
~ 9 4 AiIZŽ4---
A~ppcabie manulacKtJreF3 Uata IKwPGr13 1o 0e AiL t~e MnOf5-5E C6?7e(
F?7g A-P4D &6~7(-5-7 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this 2 AC er-AF. T conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate o u ho izati No.
NA Expiration Date NA Signed FAd4
/- (' i2 Date l 8 ThC6w j
2003 er WOwn ':i Designee. Title A1 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period (It03 /o3 to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or.implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions 44/
X
- s3 (J
1nspector's.-gignature 7Pee, 2 o, National Board, State, Province, and Endorsements Date 2003
&F F1.4S
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date 1 2 i 9 /00 Sheet W.' of 4-Z-Unit 2-k[(kr L"
C2 (-Qc, I
Address Reoair Oroanization P.O. No.. Job No.. etc.
- 3. Work Performed by Sequoyah Nuclear Plant Type Code Symbol Stamp N/A Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Authorization No N/A Address Expiration Date N/A
- 4. Identification of system lt
- 5. (a) Applicable Construction Code 19,pjdEdition,
- Addenda, L1.Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Buitt or Replacement (Yes or No)
-N o.
Pr V N7-rJN-2 A:L5'
(
I
- 7. Description of Work I MMC r'j
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp
- F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/'6(
cA1 MS
FORM NIS-2 (Back)
- 9. Remarks (c~5ri'UC-T(OA- (Z-t~;(~>-I'2ACEr AppicaDe Manulacaurers 0a1a Kepofts to oe 7MarCed CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this' r2A( rhAt 7ct conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of Au ation No.
NA Expiration Date NA Signed f(i k
\\AkrP ri 6FizTI_
Date IC) L
-1y flV\\P-F>
_ 2003 Nderor Owner's Designee, Tite CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I1-ZZ-0'3 to 01 C'q and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
a P Commissions 7,2' 06Z3 Inspector: Signature National Board, State, Province, and Endorsements Date Z j. 06. zoCV 2
','7 ov[l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date
- 12.
/ z 3
Sheet z9 0o 41 Unit 2
W O
DO
&-Ccz-2-cco, Reoair Orcanization P.0. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Address Expiration Date NIA
- 4. Identification of system NI\\1 l, 4 6I-')
'$ Z
- 5. (a) Applicable Construction Code 3, 19 p'-_Edition, Agjo Addenda, t44-Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
V-I'-2)W 1A2 t
1>LM
=4*
=
- 7. Description of Work V5:eu
-AT F
pAfL C". VA\\-V&
_Thpier
- 8. Tests Conducted: Hydrostatic a PneumaticF Nominal Operating Pressure 0
Other o Pressure
/--
psi Test Temp
'OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/0 S oi 145I A
FORM NIS-2 (Back)
- 9. Remarks 5 trDm
-COC J
C,;:
-',T ACT t dzeo4 7 Mrn D
Appucaa~e manu~ac&turet awaLa tepo~s 13 e Aua~rne Drtku'T g
I'm1z P,.IpS-P Arn ny
,1&
1Io CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ___1_____
As conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate o Authori ation No.
NA Expiration Date NA Signed L.
I l
, M e H
Date D~vS E 2003 0! 4 orOwners Designee, Tie CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected thq components described in this Owner's Report during the period i
to L
I./&L/P+/-.t..7.. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
A f
Commissions 17 Z67?
3 j
Inspector' Signature National Board, State, Province, and Endorsements Date 07, zioo4 t0ga/
IO,
- 0. 145
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet 3c of 4a-,
Unit
£ k&(0 C*C 3 -a C0l3D O C>C:
Renoir Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A
- 4. Identification of system g
Expiration Date N/A (4lE7 O
,C~ss
- 5. (a) Applicable Construction Code At4.SI 3,7_ 19 (3Edition, 7O
- Addenda, (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989 A J~Code Case
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
~~N o._
5;X
~
g v f ~
/
\\-
2 R 3 V L J & C L c U
- 7. Description of Work 1e A 56\\
1I4DC-ATtc--,
It-P'o&6 F~TT-rt'44C:)
- 8. Tests Conducted: Hydrostatic o Pneumatic _,
ominal Operating Pressure o Other o Pressure N/g psi TestTemp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
//C oF 14 5
FORM NIS-2 (Back)
- 9. Remarks tl AppicaDie Manufacturers Uala Kepons to be Ana~neO CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this is___
rep'air or replacement the rules of the ASME Code, Section Xi.
conforms to Type Code Symbol Stamp NA Certificate of Authorization No.
NA Expiration Date Signed
(
- WMM, MA tV j
?1 1xJ&t Date ownedor Over's Dbsignee, TiUe NA le)
-eD sX-1. rEl.2003 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford. Connecticut have inspected the components described in this Owner's Report during the period TI Z °3 to i 2.- 1 $ -03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermrbe, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
(
Aa.,olel- ;t,2G¢)
Inspector's ignature Date 7)ec. i (.
Commissions 7i) 0if3 National Board, State, Province, and Endorsements 2003 I
///
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet 5 1 of 4-z Z Unit g
t'-- Dff Il 0 I&/
_ ooc Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system 6'VC5, 67( LA
- >_ZS 2-.
- 5. (a) Applicable Construction Code A;V$ V 5 19 trEdition,
- Addenda, pi~g Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components M 4,-
2
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
UA 3.
f~vpC2cti4)\\ineizo;vc-Dub-
~~~~~~~I&
LACE 6D. n~ '9 0sCeH N.
2~
=~2S*
=c-CL-
'V?3
~____
- 7. Description of Work 124ALFJ
\\1,4 I\\/tE A~~-1D A-5 c_1j, J174Ev'~c
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure b/
Other o Pressure _
psi Test Temp
- F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
//l OF (4 5
FORM NIS-2 (Back)
- 9. Remarks (2t i) crot
&D):
I A ppircaDie ManulaCturers Uata KepoWs lo De Allacnej h/'.0&ve-,h-
}a ASr ws-e-SrwcHnw
'70S769 As-tD (1772?64 P2Le AtJS(
be,:31,71 12)r/70 l 17)6 Sam a
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this JAC-A =
FJ T conforms to redpair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate o Authori tion No.
NA Expiration Date NA Signed MecilI £r'iK Date A
2004
' wz40or bwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I1- /Z-03 to oz -ot -64 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermfoire, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
, A.
ue-Commissions 7Th) 4Z?63 Inspector Signature National Board, State, Province, and Endorsements Date rCfJ. 4, 2004
/13 as 145
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date 2 /3/0 4 Sheet 3 of 4-2.
Unit 2
WRoar oCa3z-DI O. No.. J-ocb oC..ec Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system CVc 5, C.A
, 5 2..
- 5. (a) Applicable Construction Code d19 19h Edition, t4.
Addenda, - 4_.Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989 Clcoe 0 1
- 6. Identification of Components Repaired or Replaced and Replacement Components M -4lC-L Repaired.
ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
N o.
_ a
~'~ c&~cc..UA 2Ao C
1J4\\-,
tJA
-a
_t_
? c, Q& o \\ce 4 :
{a i~~f:>llat
.Descrition ofIorCT
_____o
_ I
=.
- 7. Description of Work I 2 ekC-XCT
\\A g\\ L-v\\l ek C) rS~n A TEah Dew> pi 9) f-C)
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o..
Pressure psi Test Temp
°F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
i/I Or
/ 45
FORM NIS-2 (Back)
- 9. Remarks
(
5{TLUCTCIxt COD/!!
ppIica~e Manuiaclurer S Uala heponis to De Atlacnea Gc7e,7aC) A r) 7Z&4-CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ¶iLAC E.s1XE-,'4T conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate of Autho ization No.
NA Expiration Date NA SignedW
- 17.
4C\\
rpJ Date 3
L~
2L)A`I?>(
2004 ker&Ownerfs Designee, TiUeDae tn 124-'
04 CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 11 - /
'- 03 to 0o zL -0 4 -O 4 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
W/14God Commissions 70 J&93 Inspector' Signature National Board, State, Province, and Endorsements Date Ce. 4, 2004
//5 6O 14.5
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date lgoei Sheet 3
of 4 2 Unit Z
KS-C/L)240-C ReJoai Oraiaio No.JbNo.ec Reoair Orr anization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No NIA Expiration Date N/A
- 4. Identification of system (r-- Ccjc-i
. t;
(
- 5. (a) Applicable Construction Code 19,J~Edition, pt%- Addenda, Al%
Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989 COPC: 6) : a
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
No.
'2 Ur3-.235 EC if
______ILM3 y
4z~
t~? c 7 e
Zinc o FL C:L(j l
X<
i<;)
eL3tf4
- 7. Description of Work ej2C,,C C
V., 0 V L' \\,/ (--,
A4k tL~ A, SE C-r L CO r _
, ;'? wa.-( C-
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp
_F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/z in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
//¢' O 145
FORM NIS-2 (Back)
- 9. Remarks (-cii3moc0Tio I C06-V14V-VF- ; k5Ak F-:-
Appiscaoie manufaacurer s Uata R~eports L0 De Aiia~nea 91 a I
/W S \\ 651,-7
(-=I&C-)
Ll 17 0
k') aJ- LN Jc'
I
.1 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this~?L'C.*
conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate.
A tho ation No.
NA Expiration Date Signed I
fihF e\\14 F-f6>I Date Ovfnerdr Owner's Designee, Title NA 7 1-uL 2003' Zt f/7/ /
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford Connecticut have inspected the components described in this Owner's Report during the period 1 1-1 703 to
) 1 '08 O-2
and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
-%-/
Commissions 7kJ Z~
_3
(
Date lnspector'A-ignature-4tIa ^/.
0
)/
National Board, State, Province, and Endorsements 2004 1/ 7 c/ 1.4 6
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name
.P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date 12-/fci
/v 3 Sheet :4-of 4
Unit e
j L 5 -c35,7o-CQc Reoair Orcanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp NIA Authorization No N/A Expiration Date NIA
- 4. Identification of system a T
( 4 1CI o
I C
- 5. (a) Applicable Construction Code jRSMZe5 19 adEdition, God Addenda, /'e-Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identificaticn Built or Replacement (Yes or No)
I14 AjjA X
- 7. Description of Work
)p 2
-t owt-j
-- T5)L:- I ri Cw
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp
°F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8',2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2 (Back)
- 9. Remarks 5((&
- 4
~{-?Aq IC-) -34 Upplicalie Manulacurers Lata Keporls to De AracneM
~~(o7c67&-5Airc (~62,?-5E~
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this
\\.S"CEMCAX.T conforms to repair or replacement the rules of the ASME Code, Section Xi.
Type Code Symbol Stamp NA Certificate of Authorizaion No.
NA Expiration Date NA Signed 4\\4Lit N-Evck Date t&- T C,'2N 3
Owne or_0er's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I I - 1I- 03 to C) 1Q-0&-of and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
zl-4sntr Commissions
//t) zcf3 Inspector's nature National Board, State, Province, and Endorsements Date c-
- o.
&( &
Qo4
-24/a4o
/ 0~ 4
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner.
Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date
/
C /0:?,
Sheet of 4=
Unit YJok~ a i3-O
'8 7 -C:O'c' Reoair Oroanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No NIA Expiration Date N/A Address
- 4. Identification of system C4-,TAINA'4
--^<r gp5zu
, ag 5 &
- 5. (a) Applicable Construction Code 19 aJ
- dition, A
- Addenda, Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board identifica-ion Built or Replacement (Yes or No)
-E C _ _ _ _ _
_ _ _N o.
a
=
=
- 7. Description of Work gap Cm C
£
- fbt4PJEtC-7'-
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 854 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
iZo 0
-1 ~4
FORM NIS-2 (Back) rV1,srLC-TQ-can-C-c) il
' rCf-TZ1CT C2 C;
(,r I'S
'1
- 9. Remarks
£-?Prf:T A s5fa6 Appiicaoie Manuta clurers Uala iseports to be Facner C--rnC) li eD 4
ID VAu LG fL( S,,67 CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this i2:S-A C &i1-& ' -(7 conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA CertificateofAuthorizatn No.
NA Expiration Date Signed
\\4 I,tlC(4-A G'4Ct1C.
Date NA 1/2,5 1ZC 6A3L': 2003 Ow*et&.Qner's Designee, TiUe CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 1 03 to I Z? - I-0and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
J Inspector's ignature Date T)e c. /I, 200 Commissions T2 Z0.3 National Board, State, Province, and Endorsements 2003
/z/
E, 146
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Date 12tc
/
I-On-Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Sheet 37 of 4 -
Unit Z
Reoair Orzanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A
- 4. Identification of system
.0c5,6~y~
I
- 5. (a) Applicable Construction Code 19 C-oEdition,(,.h5c.
Addenda, fQ3-Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
- -S t
&s 31
.doF.-ni9 JzUt-
-,E
~-~-~-3.
I I'iZ A-
/4 S ASEr/
No.
.7I
=
- 7. Description of Work p
ED t-V U
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp
- F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/ Zz.- C)~ 4 5
FORM NIS-2 (Back)
- 9. Remarks Af4-ApplicaDbe Manulacturers Uata Xepofts to De intactad CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Le EA tr-t6 7
r pair or replacement the rules of the ASME Code,Section XI.
conforms to Type Code Symbol Stamp NA Certificate of Authorizalion No.
NA Expiration Date Signed TW&t'J-1, IT\\/IECn71 eVc 1
C NA
)ate 1(& Dii-CI/ Cvl 2003 Own& br O (ner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I Ili'I/O3 to
- zL and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
-I J
Inspector's ignature Date D)ec. 20, Commissions go/ WZZ6£3 National Board, State, Province, and Endorsements 2003 1a3 oc 1I45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date j /12/o4-Sheet 3) of 42-Unit 0
(
L)_3 -03152~5~--Cz' Type Code Symbol Stamp N/A Authorization No NIA Expiration Date N/A
- 4. Identification of system
[2.
5, 1
'i 3 I
- 5. (a) Applicable Construction Code tvc--
19 o;) Edition, 45,
- Addenda, G
Code Case (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
N o.
PaL ic TA2lz
___i Pr-P-Z'nV& qc-=
- 7. Description of Work E l45-rALL>
Pbj)(
Ca' 3
§ >sv Fi~~c~tJC:j
>/\\p,-,-erJAP46LE
- 8. Tests Conducted: Hydrostatic o Pneumatic o ominal Operating Pressure o Other o Pressure psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/2-1).
o145
FORM NIS-2 (Back)
- 9. Remarks AL AppIicabie Manuluacturer Uata Keports to I A' U~acleJ CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this ief)A*1.
conforms to repAir or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate o Authori2tion No.
NA Expiration Signed W Lk1RII e @t P@-
Date Date NA 2 (cO
[fA-A41L -f 2004 Ownorwner's Designee. Title 1
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period Io/3o/03 to
° /iz/il4 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furtherroi6re, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
,-Adisrt.
Commissions Ii)
-26 93 National Board, State, Province, and Endorsements
(
1 Inspector's Sigfiature Date 4 v.
./
2004 12.5 e
145
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date 12 2- /0 5 Sheet
)of Unit Z.
-hOA adb o 14' I 7-cxZ7-
=
Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Reoair Oroanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Address Expiration Date N/A
- 4. Identification of system
/7kC'C5. (Cc-A a5
(
- 5. (a) Applicable Construction Code 19,h-Edition, Addenda, t Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components
- Repaired, ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
_ _ A _ _N o.
l 2*iAFFS'=4 LEI U=
- 7. Description of Work 'j2C-,DL Cef) tc 4
e CT~r
_5LcuaY A'4T~ [-~LLT-5
- 8. Tests Conducted: Hydrostatic a Pneumatic o Nominal Operating Pressure Other o Pressure psi Test Temp OF NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/Z Or j4S
FORM NIS-2 (Back)
- 9. Remarks 6
UC4-5Tt% I a
co(talc 9
l9 5,4 AcN f, -ioun"e- --
6 PpIIabie Manuiacturet S udta IwporUto ge p~la;iieu C-- ~
5
(,;7 &:,Z-7c-5 4Co&76-76('f CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and thisl c2.PC'EI&1Go4fr t
repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA conforms to Certificate of Authorization No.
NA Expiration Date Signed eVfA e-Date NA Zg Z 7EA fCRZ 2003 Owner k O2Ver's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period l 0 3 to L i - o ^ 0 4 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
(
%d, c
/
Inspector's Srgnature gae caw. A? 2004-
- ommissions 7i/~ J6 f3 National Board, State, Province, and Endorsements 2989o
-c//<
V-01c
/Z7 oc- (45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Date
/7 /oX Sheet 4o' of 4 ?I Unit a
1 ReoaI r o
No.5
. J7-NLoC.
Type Code Symbol Stamp N/A Authorization No N/A Address Expiration Date NIA
- 4. Identification of system P& 5, EL s 1
- 5. (a) Applicable Construction Code.j~,4 r,3i 719 6R Edition,
-1 Addenda, AJAX Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year Replaced.
Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
No.
=-=___,
- 7. Description of Work gRoa
.5 c)Pqs-6 -c P
'a):-NL-T&,
-
- 8. Tests Conducted: Hydrostatic o Pneumatic 4ominal Operating Pressure o Other o Pressure P
psi Test Temp _F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
lz q ov 145
FORM NIS-2 (Back)
- 9. Remarks 15k ipf carie Manufacturers Uata heports to De,^ctacned CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this coAC' 4 7 conforms to repair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate of Authorizat' n No.
NA Expiration Date NA Signed Vel. A ir f4p Date 17 Go fi 2004 Owner Kr Oer's Designee. Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period I
I /z e' io3 to 0/ 1D 7 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warrarnty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermbre, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
-~~ di/ !A-4 K
Commissions 7i) Z6 ?3 National Board, State, Province, and Endorsements DJ Date Inspector'stSignature FfihA0.
7.
2004
- fiX, OF 14-5
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xi
- 1. Owner Tennessee Valley Authority Date I 2 /(,i:0 Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Sheet 41 of 4 2 Unit ii Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 late CV - Of 2c)4-txC Reoair Oroanization P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No N/A Expiration Date N/A Address
- 4. Identification of system
'2C-5 gLAs-3 I
- 5. (a) Applicable Construction Code
- p.
S 19 t-A Edition, /r44 Addenda, AJA Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer National Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identification Built or Replacement (Yes or No)
No.
0 - 6G
-5 _ 5 62 c" P5 (10 y
12& LAC 3 r X Joo
_ I II _
_ I
_ I __
I
_ 1 I_
- 7. Description of Work a-f
'Ac \\'ALc
- 8. Tests Conducted: Hydrostatic o Pneumatic o Nominal Operating Pressure s
Other o Pressure psi Test Temp OF NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8Y2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
/30 c,1F i 5
FORM NIS-2 (Back)
- 9. Remarks 6 c5CLx~Itf 6gT12AC-T 6-) (c)-34 tApud~auiv manufacturers Data R~eports to De Anlaclle
&2\\L5-
¶ C?67'
~o
&I 7& i7? -- -
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this f
ACOME<T conforms to rdpair or replacement the rules of the ASME Code,Section XI.
Type Code Symbol Stamp NA Certificate Authoriz tion No.
NA Expiration Date NA Signed [PVU A
Aec A go l-Date Ic53 7-6:z-e?-003 Ownetor pSvners Designee. TiWe CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Bo.ler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 9--o 3
to 12
-add3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
K Inspecto Signature Date 72ec, go, Commissions
- a Z65F3 National Board, State, Province, and Endorsements 2003 7
/3/
1?
(45
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section Xl
- 1. Owner Tennessee Valley Authority Name 1101 Market Street, Chattanooga, TN 37402-2801 Address
- 2. Plant Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address
- 3. Work Performed by Sequoyah Nuclear Plant Name P. 0. Box 2000, Soddy-Daisy, TN, 37384-2000 Address Date Sheet Unit 1 / 7 /0 3s 4-zof 4-2 Z
Recair Orcaniation P.O. No.. Job No.. etc.
Type Code Symbol Stamp N/A Authorization No NIA Expiration Date N/A
- 4. Identification of system C
Ss
<5 l t S 5
- 5. (a) Applicable Construction Code 19 M,,aEdition, a<
- Addenda,
,4-Code Case (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989
- 6. Identification of Components Repaired or Replaced and Replacement Components Repaired.
ASME Code Name of Name of Manufacturer Naticnal Other Year
- Replaced, Stamped Component Manufacturer Serial No.
Board Identificaicn Built or Replacement (Yes cr No) 2_____
-FrU-tt WeTm.'=
1 t
OrT~
______.C'
~SL3nACftD t
_ I.
I 1_
P_
A_
- 7. Description of Work 2
'~Tl: CL7 1-6 )s, t'-i (-,
S'
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psi Test Temp
°F NOTE:
Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
13 oF 145
FORM NIS-2 (Back)
- 9. emrk
- e-u-p f
K>--P-CT
) I L) *9 Remark I-I nAicao.e Manu~lacmers Uaia htapor.s io De mrFacriel
/e=:A
- (l CC(4TlL5
~<
-7:43
/Vu CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this &L-EAtCAV I conforms to repair or replacement the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp NA Certificate of Authoriza 0nNo.
NA Expiration Date NA Signed VP?/ (t.
f M E lf L:_A6IL, tDate
'2 1 \\IA uni-2 2003 Owner qOwer's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Tennessee and employed by HSB CT of Hartford. Connecticut have inspected the components described in this Owner's Report during the period 13 Z4 - GC to cDi - Z 0 -03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASMIE Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or. implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage-or a loss of any kind arising from or connected with this inspection.
Commissions 77v)2.
8 Inspector's gnature National Board, State. Province, and Endorsements ate _ Pl/. 5B ZC )3
/353 o
145
OWNER: TENNESSEE VmLLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402.2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH nUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED APPENDIX C PRESSURE TEST REPORT The inspection plan work required for the first outage of the third period of the second interval for Code Category B-P, Code Category C-H, Code Category D-A, Item number D1.10; Code Category D-B, Item number D2.10; and Code Category D-C, Item number D3.10 and RI-ISI code Category R-A (Item Numbers R1.11 and R1.12) is on schedule.
14
-1 P PREPARED BY I
(U
/3 1
/3zr 1A~
4
OWNER: TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH rNUtJCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED System Pressure Tests Unit 2 Cycle 12 Third Period of the Second Interval The Unit 2 tests scheduled for the third period which were required to be performed during the U2C12 refueling outage are complete with the exception of Main and Auxiliary Feedwater inside Containment and ERCW. These will be completed during the remaining timeframe of the third period along with the remainder the systems scheduled during the U2C13 RFO.
System Pressure Tests TDAFW Steam Supply Main Steam Piping Inside Containment and Annulus Steam Generator Blowdown Piping Inside Containment to the outboard Containment Isolation Valves MDAFW 2A-A suction and discharge piping MDAFW 2B-B suction and discharge piping CVCS piping inside containment (seal injection, seal leakoff, charging/pressurizer spray, and letdown)
Safety Injection inside containment Safety Injection outside containment Safety Injection Cold Leg Accumulators and associated piping RCS system leakage test Component Cooling Water inside containment Containment Spray Train A Containment Spray Train B Residual Heat Removal Train A Residual Heat Removal Train B Residual Heat Removal Injection Containment Penetrations (Fire Protection, Chilled Water, Demin Water, Glycol, Waste Disposal, Floor & Equipment Drains, Spent Fuel'Pool Cooling, and Primary Water)
Steam Generator Blowdown RI-ISI CVCS RI-ISI RCP Seal Injection and Seal Leakoff RI-ISI Containment Spray RI-ISI Feedwater RI-ISI Reactor Coolant RI-ISI Residual Heat Removal Rl-ISI Safety Injection RI-ISI 135 o'
lAS
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA. TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: jiNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED APPENDIX D IWE METAL CONTAINMENT EVALUATIONS The following evaluations were performed for containment examinations performed during U2C12 for inaccessible areas and additional examinations in accordance with 10CFR 50.55a(b)(2)(ix) for Class MC components.
PREPARED BY 6f I>
13(6 Co 145
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 37384.2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED
SUMMARY
OF IWE METAL CONTAINMENT EVALUATIONS The Unit 2 Cycle 12 Inservice Inspection of Class MC components included five Notification of Indications (NOls) for IWE Metal Containment evaluations. These evaluations require reporting per 10CFR 50.55a(b)(2)(ix).
SUMMARY
- IWE NOTIFICATION OF INDICATIONS NOI NUMBER COMPONENT IDENTIFIER 2-SQ-367 MB-2 (Inboard side of SCV approximatly 1 foot above moisture barrier)
DISPOSITION: Cleaned and repainted areas.
2-SQ-368 SCV-1, 2, 3, and 4 (EL 679' area behind the EGTS ductwork)
DISPOSITION: Cleaned, repainted areas and removed arc strikes.
2-SQ-369 SCV-1, 2, 3, and 4 (M-O) and (O-R from vertical I stiffeners 37-74) and SCV-Dome (S-Elevation 821)
DISPOSITION: Cleaned, repainted areas and repaired stiffeners.
2-SQ-372 I Penetrations X-64, X-65, X-66 and X-67 DISPOSITION: Cleaned and repainted areas.
2-SQ-373 A
SCV-1-ed and SCV-4-le (arc strikes)
DIS P OSITIO N: Arc strike areas removed and areas repainted.
/37 -ox 14S
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAh..JCLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402-2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-367 Component Identifier: MB-2 (Inboard side of SCV approximatly 1 foot above moisture barrier)
Examination Report Number: SCV-0193 Disposition: Cleaned and repainted areas Evaluation of inaccessible areas as required by 10CFR50.55a(b)(2)(ix)(A)
(Include (1) A description of the type and estimated extent of degradation, and the conditions that led to the degradation; (2) An evaluation of each area, and the result of the evaluation; and (3) A description of necessary corrective actions).
These indications noted during the VT-3 visual examination of the SCV interior surface in the vicinity of the moisture barrier at the interface of the SCV and raceway floor (12 inches above the floor interface). This VT-3 visual examination was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). One area, approximately 4 inch square section of coating, pulled away from the SCV at azimuth 274 when the insulation was removed. Another area between azimuth 208 and 218 had several locations were the coating was not applied to the SCV up to the moisture barrier which identified conditions consisting of mild uniform corrosion.
There were no detrimental flaws or significant degradation of the SCV liner noted during the inspection. All areas were evaluated by engineering. These areas are normally inaccessible due to the stainless steel flashing and insulation. These areas were coated and re-examined and determined acceptable under VT-3 requirements. These SCV areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. Based on this information, there is no indication that an adverse condition exists in the area examined or that an adverse condition would be present in inaccessible areas.
Evaluation of additional examinations required per 10CFR50.55a(b)(2)(ix)(D).
(1)
A description of each flaw or area, including the extent of degradation, and the conditions that led to the degradation; (2) The acceptability of each flaw or area, and the need for additional examinations to verity that similar degradation does not exist in similar components; (3) A description of the necessary corrective actions; and (4) The number and type of additional examinations to ensure detection of similar degradation in similar components.
These indications were noted during the VT-3 visual examination of the SCV interior surface in the vicinity of the moisture barrier at the interface of the SCV and raceway floor (12 inches above the floor interface). This VT-3 visual examination was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). One area, approximately 4 inch square section of coating, pulled away from the SCV at azimuth 274 when the insulation was removed.
Another area between azimuth 208 and 218 had several locations were the coating was not applied to the SCV up to the moisture barrier which identified conditions consisting of mild uniform corrosion. The examination results identified minor rust and paint separation at these locations. There were no detrimental flaws or significant degradation of the SCV liner observed.
13S OF 14 S
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED PLANT: SEQUOYAH.. jCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-367 (continued)
These areas are normally inaccessible due to the stainless steel flashing and insulation. These areas were recoated and re-examined and determined acceptable under VT-3 requirements.
These SCV areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. These SCV areas are acceptable for continued service, and no further corrective action is required. Therefore, additional examinations are not warranted.
1-3 C/
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH i..CLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402-2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-368 Component Identifier: SCV-1, 2, 3, and 4 (EL 679' area behind the EGTS ductwork)
Examination Report Number: SCV-0206, SCV-0207, SCV-0208 and SCV-0209 Disposition: Cleaned, repainted areas and removed arc strikes Evaluation of inaccessible areas as required by 10CFR50.55a(b)(2)(ix)(A)
(Include (1) A description of the type and estimated extent of degradation, and the conditions that led to the degradation; (2) An evaluation of each area, and the result of the evaluation; and (3) A description of necessary corrective actions).
These indications were noted during the VT-3 visual examination of the SCV exterior surface areas from the floor up to horizontal stiffener B, at the fuel transfer canal wall and behind the emergency gas treatment EGTS duct work approximately 340 feet. The areas examined were identified for coating repairs, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). The SCV surface showed light to moderate corrosion, rusting, flaking and pitting, with no visible signs of active corrosion and several arc strikes. The areas examined did not show any significant wall loss or gross degradation. The corrosion damage appeared to be from original construction. The arc strike areas were removed in accordance with 0-MI-MXX-000-030.0 and the wall thickness remaining was within tolerance. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. Based on this information, there is no indication that an adverse condition exists in the areas examined or that an adverse condition would be present in inaccessible areas.
Evaluation of additional examinations required per 10CFR50.55a(b)(2)(ix)(D). (1)
A description of each flaw or area, including the extent of degradation, and the conditions that led to the degradation; (2) The acceptability of each flaw or area, and the need for additional examinations to verity that similar degradation does not exist in similar components; (3) A description of the necessary corrective actions; and (4) The number and type of additional examinations to ensure detection of similar degradation in similar components.
These indications were noted during the VT-3 visual examination of the SCV exterior surface areas from the floor up to horizontal stiffener B, at the fuel transfer canal wall and behind the emergency gas treatment EGTS duct work approximately 340 feet. The areas examined were identified for coating repairs, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). The SCV surface showed light to moderate corrosion, rusting, flaking and pitting, with no visible signs of active corrosion and several arc strikes. The areas examined did not show any significant wall loss or gross degradation. The corrosion damage appeared to be from original construction. The arc strike areas were removed in accordance with 0-MI-MXX-000-030.0 and the wall thickness remaining was within tolerance. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. The area will be recoated according to site procedures. A VT-3 preservice examination will be performed on these areas following reapplication of the coatings to satisfy the requirements of IWE-2200(g). The component is acceptable for continued service, and no further corrective action is required. Therefore, additional examinations are not warranted.
lio 0 -IL 1Z4
OWNER:
TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH... jCLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402.2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-369 Component Identifier: SCV-1, 2, 3, and 4 (M-O) and (O-R from vertical stiffeners 37-74) and SCV-Dome (S-Elevation 821)
Examination Report Number: SCV-0202, SCV-0203, SCV-0204 and SCV-0205 Disposition: Cleaned, repainted areas and repaired stiffeners Evaluation of inaccessible areas as required by 10CFR50.55a(b)(2)(ix)(A)
(Include (1) A description of the type and estimated extent of degradation, and the conditions that led to the degradation; (2) An evaluation of each area, and the result of the evaluation; and (3) A description of necessary corrective actions).
These indications were noted during the VT-3 visual examination of the SCV exterior surface areas horizontal stiffeners M-O and S to elevation 821 feet from vertical stiffeners 0 through 90; horizontal stiffeners O-R from vertical stiffeners 36 through 75. The areas examined were identified for coating repairs, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). The examination identified indications consisting of light to moderate rusting, discoloration, flaking, minor corrosion and pitting and two vertical stiffeners with attachment removal damage, however upon further review, it was deemed to be minor rusting and discoloration after cleaning. Two stiffeners had damage due to attachment removal and these areas were repaired (WOQ 03-016795-000). There were no visible signs of active corrosion. The areas examined did not show any significant wall loss or gross degradation. The corrosion damage appeared to be from original construction. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. Based on this information, there is no indication that an adverse condition exists in the areas examined or that an adverse condition would be present in inaccessible areas.
Evaluation of additional examinations required per 10CFR50.55a(b)(2)(ix)(D). (1)
A description of each flaw or area, including the extent of degradation, and the conditions that led to the degradation; (2) The acceptability of each flaw or area, and the need for additional examinations to verity that similar degradation does not exist in similar components; (3) A description of the necessary corrective..
actions; and (4) The number and type of additional examinations to ensure detection of similar degradation in similar components.
These indications were noted during the VT-3 visual examination of the SCV extericr surface areas from horizontal stiffeners M-O and S to elevation 821 feet from vertical stiffeners 0 throuch 90 and horizontal stiffeners O-R from vertical stiffeners 36 through 75. The areas examined were identified for coating repairs, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). The examination identified indications consisting of light to moderate rusting, discoloration, flaking, minor corrosion and pitting and two vertical stiffeners with attachment removal damage, however upon further review, it was deemed to be minor rusting and discoloration after cleaning. Two stiffeners had damage due to attachment removal and these areas were repaired (WO# 03-016795-000). There were no visible signs of active corrosion. The areas examined did not show any I 1l cc / 45
OWNER:
TENNESSEE V#&LLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRE PLANT: SEQUOYAH.. CLEAR PLANT P.O. BOX 2000 SODDY DAISY. TENNESSEE 37384-2000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-369 (continued) significant wall loss or gross degradation. The corrosion damage appeared to be from original construction. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. The areas will be re-coated according to site procedures. A VT-3 preservice examination will be performed on these areas following re-application of the coatings to satisfy the requirements of IWE-2200(g). The component is acceptable for continued service, and no further corrective action is required. Therefore, additional examinations are not warranted.
14Za *45
OWNER: TENNESSEE VALLEY AUTHORITY PLANT: SEQUOYAH NUCLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA, TENNESSEE 37402-2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO
.. C CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1, 1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-372 Component Identifier: Penetrations X-64, X-65, X-66 and X-67 Examination Report Number: SCV-0229 Disposition: Cleaned and repainted areas Evaluation of inaccessible areas as required by IOCFR50.55a(b)(2)(ix)(A)
(Include (1) A description of the type and estimated extent of degradation, and the conditions that led to the degradation; (2) An evaluation of each area, and the result of the evaluation; and (3) A description of necessary corrective actions).
These indications were noted during the VT-3 visual examination of the SCV exterior surface areas at chill water penetration X-64, X-65, X-66 and X-67 that were identified during preparation for the ultrasonic thickness examination on these penetrations. This examination identified flaking and minor rusting on the penetrations and SCV. This condition was due to the removal of the foam insulation and the sweating of the chill water lines. These areas examined were identified for coating repairs during cleaning for the ultrasonic examination, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b).
Flaking paint and minor rust were removed to allow for the ultrasonic examination. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. Therefore, there is no indication that an adverse condition exists which may be present in inaccessible areas. These penetration and SCV areas were cleaned, examined and re-coated.
Evaluation of additional examinations required per 10CFR50.55a(b)(2)(ix)(D). (1)
A description of each flaw or area, including the extent of degradation, and the conditions that led to the degradation; (2) The acceptability of each flaw or area, and the need for additional examinations to verity that similar degradation does not exist in similar components; (3) A description of the necessary corrective actions; and (4) The number and type of additional examinations to ensure detection of similar degradation in similar components.
These Indications were noted during the VT-3 visual examination of the SCV exterior surface areas at chill water penetration X-64, X-65, X-66 and X-67 that were identified during preparation for the ultrasonic thickness examination on these penetrations. This visual examination identified flaking and minor rusting on and at the penetrations. These areas examined were identified for coating repairs during cleaning for the ultrasonic examination, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b).
Flaking paint and minor rust were removed to allow for the ultrasonic examination. The surrounding areas were checked for wall loss using N-UT-26. The remaining wall was acceptable. A VT-3 preservice examination will be performed on these areas following re-application of the coatings to satisfy the requirements of IWE-2200(g). These conditions were due to the removal of the foam insulation and the sweating of the chill water piping. These penetrations and SCV were cleaned, examined and re-coated.
OWNER:
TENNESSEE VALLEY AUTHORITY 1101 MARKET STREET CHATTANOOGA, TENNESSEE 37402-2801 PLANT: SEQUOYAH NUCLEAR PLANT P.O. BOX 2000 SODDY DAISY, TENNESSEE 373842000 CERTIFICATE OF AUTHORIZATION: NOT REQUIRED UNIT: TWO COMMERCIAL SERVICE DATE: JUNE 1,1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-372 (continued)
These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. These areas were recoated according to site procedures. The component is acceptable for continued service, and no further corrective action is required. Therefore, additional examinations are not warranted.
H4 oF 5
OWNER:
TENNESSEE VJ..LEY AUTHORITY PLANT: SEQUOYAH ls-CLEAR PLANT 1101 MARKET STREET P.O. BOX 2000 CHATTANOOGA. TENNESSEE 37402-2801 SODDY DAISY, TENNESSEE 37384-2000 UNIT: TWO CERTIFICATE OF AUTHORIZATION: NOT REQUIRED COMMERCIAL SERVICE DATE: JUNE 1.1982 NATIONAL BOARD NUMBER FOR UNIT: NOT REQUIRED IWE METAL CONTAINMENT EVALUATION NOI Number: 2-SQ-373 Component Identifier: SCV-1-lB AND SCV-4-1B (arc strikes)
Examination Report Number: SCV-0230 Disposition: Arc strike areas removed and areas repainted Evaluation of inaccessible areas as required by I OCFR50.55a(b)(2)(ix)(A)
(Include (1) A description of the type and estimated extent of degradation, and the conditions that led to the degradation; (2) An evaluation of each area, and the result of the evaluation; and (3) A description of necessary corrective actions).
These Indications were noted during the VT-3 visual examination of the SCV interior surface areas that were identified during the U2C12 general visual examination. This visual examination identified arc strikes on the SCV. These arc strikes were do to handling of welding equipment during construction or modification. These areas examined were identified for coating repairs during arc strike removal process, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). These arc strikes were removed in accordance with 0-MI-MXX-000-030.0. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed.
Therefore, there is no indication that an adverse condition exists which may be present in inaccessible areas. These SCV areas were re-coated.
Evaluation of additional examinations required per IOCFR50.55a(b)(2)(ix)(D). (1)
A description of each flaw or area, including the extent of degradation, and the conditions that led to the degradation; (2) The acceptability of each flaw or area, and the need for additional examinations to verity that similar degradation does not exist in similar components; (3) A description of the necessary corrective actions; and (4) The number and type of additional examinations to ensure detection of similar degradation in similar components.
These areas examined were identified for coating repairs during arc strike removal process, and this visual examination (VT-3) was performed prior to surface preparation to satisfy the requirements of IWE-2500(b). These arc strikes were removed by blending. A visual exam was performed after their removal. No indications were found. The surrounding areas were checked for wall loss using N-UT-26. The remaining wall was acceptable. A VT-3 preservice examination will be performed on these areas following re-application of the coatings to satisfy the requirements of IWE-2200(g). These arc strikes were do to handling of welding equipment during construction or modification of plant equipment. These arc strikes were removed and SCV re-coated. These areas are not considered suspect and do not impact the structural integrity or leak tightness of the SCV. No detrimental flaws were observed. These areas will be re-coated according to site procedures. The component is acceptable for continued service, and no further corrective action is required. Therefore, additional examinations are not warranted.
1 o 45 o
(45