| | Q | CCA | Title |
|---|
| 05000461/FIN-2014008-02 | 2014Q3 | | Evaluation of RCE 1594407 Against Inspection Procedure 95001 Objectives |
| 05000461/FIN-2014004-06 | 2014Q3 | | Modifications to Steam Dryer Tie Bars 28 and 30 Without a 10 CFR 50.59 Safety Evaluation |
| 05000461/FIN-2014004-05 | 2014Q3 | | Failure to Update the Updated Safety Analysis Report (USAR) - SD Structural Integrity Function |
| 05000461/FIN-2014008-01 | 2014Q3 | | Failure to Identify a Level 1 Test Criterion Failure |
| 05000461/FIN-2014004-03 | 2014Q3 | P.5 | Failure to Establish a Surveillance Procedure for Reactor Core Isolation Cooling Pump due to Unacceptable Preconditioning |
| 05000461/FIN-2014004-02 | 2014Q3 | H.9 | Programmatic Failure to Complete Operability and Functionality Determinations |
| 05000461/FIN-2014004-01 | 2014Q3 | H.12 | Exceeded Technical Specification Allowed Outage Time for Electrical Power Systems Due to Auxiliary Equipment Out of Service |
| 05000461/FIN-2014004-04 | 2014Q3 | H.7 | Incomplete Evacuation Time Estimate Submittals |
| 05000461/FIN-2014005-02 | 2014Q4 | | Potential Failure to Maintain Safety Related Cables in a Qualified Environment |
| 05000461/FIN-2014005-04 | 2014Q4 | | Failure to Update the Updated Safety Analysis Report - Combustible Gas Control System Supply Fan Motor 1VR08C Function |
| 05000461/FIN-2014005-01 | 2014Q4 | P.5 | Station Procedures Failed to Provide Controls for Material Near Transformers |
| 05000461/FIN-2014405-01 | 2014Q4 | H.9 | Security |
| 05000461/FIN-2014005-05 | 2014Q4 | H.5 | Failure to Provide Procedure Instructions Results in Exceeding Technical Specification Heat Up Rate During Plant Start Up |
| 05000461/FIN-2014005-03 | 2014Q4 | | Failure to Translate Seismic Design Requirements into Applicable Procedures |
| 05000461/FIN-2015403-01 | 2015Q1 | | Security |
| 05000461/FIN-2015001-03 | 2015Q1 | | Failure of the Division 3 Shutdown Service Water Pump due to an inadequate Bushing Design |
| 05000461/FIN-2016008-01 | 2015Q1 | H.14 | Failure to Perform and Adequate Equipment Apparent Cause Evaluation |
| 05000461/FIN-2015001-02 | 2015Q1 | P.3 | Unqualified safety-related cables used in a submerged environment |
| 05000461/FIN-2015001-01 | 2015Q1 | H.14 | Failure to perform adequate channel calibration on seismic instrumentation |
| 05000461/FIN-2015008-01 | 2015Q1 | | Inadequate 50.59 Evaluation for Switchgear in Seismically Unanalyzed Conditions |
