05000458/LER-2015-003, Operations Prohibited by Technical Specifications and Loss of Safety Function Due to Inoperability of Division 2 Containment Penetration Leakage Control System
| River Bend Station - Unit 1 | |
| Event date: | 5-14-2015 |
|---|---|
| Report date: | 07-09-2015 |
| Reporting criterion: | 10 CFR 50.73(a)(2)(i)(B), Prohibited by Technical Specifications 10 CFR 50.73(a)(2)(v)(C), Loss of Safety Function - Release of Radioactive Material |
| 4582015003R00 - NRC Website | |
REPORTED CONDITION
On May 14, 2015, with the plant operating at 100 percent power, a manual valve (**V**) in the Division 2 penetration valve leakage before the plant was started up from a refueling outage on March 26, 2015, causing that subsystem to be inoperable for a period greater than the 30-day allowable outage time in Technical Specifications.
The valve (SWP-V912) is in the service water supply to the air compressor (**CMP**) on that skid. The mispositioning of the valve the intervening period, there were two short planned outages of the Division 1 LSV subsystem.
This condition is being reported in accordance with 10 CFR 50.73(a)(2)(i)(B) as operations prohibited by Technical Specifications, and with 10 CFR 50.73(a)(2)(v)(C) as a loss of the safety function of the LSV system during those periods when the Division 1 subsystem was out of service.
INVESTIGATION AND IMMEDIATE CORRECTIVE ACTIONS
On May 14, while installing a clearance tagout on the Division 2 LSV skid, the operators found SWP-V912 fully closed and locked.
The required position is two turns open and locked. The valve was initially closed on February 26 during a refueling outage. A (LCO) tracking system. When the associated work was completed, the valve was returned to its required position and the LCO entry was cleared. During the intervening period, the Division 2 service water system had been drained for maintenance.
On March 5, while the Division 2 service water system was being refilled, water was found coming from the inlet piping of the Division 2 LSV compressor. Although this condition was an expected consequence of an ongoing electrical bus outage that caused a tracking system. Approximately three days later, the operator who had originally restored the valve position was reviewing the main the first closure earlier in the outage and assumed that the log entry could be closed, since he had restored the valves to the required position. He then cleared the log entry without verifying the valve positions.
Before plant startup from the outage, the Division 2 LSV compressor was run on March 25 for a scheduled surveillance test. The test required the compressor to be operated for 15 minutes under load. Computer data reviewed for this investigation found that, unknown to the operators, the compressor automatically stopped after running for approximately 5 minutes. It has been determined that two anomalous conditions led the operators at the time to nevertheless declare the surveillance test successful:
(1) In 2011, performance problems with the Division 2 subsystem were being investigated. As a consequence of actions taken then, the circuitry for a compressor "trouble" alarm was altered such that the alarm annunciated during the compressor start sequence, which was a change from past operations. The presence of this alarm with the compressor operating masks any subsequent automatic trip signal.
- 00 2015 - 003 (2) The sequence of the surveillance procedure steps for securing the compressor directs the operator to input a "stop" signal and then performing the action must move to a different panel to view the indicating lights after initiating the "stop" signal.
discovery that the compressor was not operating correctly during the test on March 25. A subsequent test in April yielded similar results. A test run on May 4 was to include the collection of vibration data on the compressor. With the service water isolated, the compressor again tripped early due to high temperature on the air discharge header. Personnel at the scene reported this condition to SWP-V912 was properly positioned on May 15 and the subsystem has since demonstrated proper operation.
APPARENT CAUSE
This event was caused by the failure of the operator to enter the valve closure of March 5 into the LCO tracking system.
CORRECTIVE ACTIONS to PREVENT RECURRENCE The procedure for the monthly surveillance test of the LSV compressors was revised to clarify the steps for verification of proper equipment operation. Detailed human performance evaluations were performed for the operators involved.
PRIOR OCCURRENCE EVALUATION
No similar events have been reported by River Bend Station in the past three years.
SAFETY SIGNIFICANCE
The two periods during which the Division 1 LSV subsystem was inoperable totaled approximately 7.5 hours. Otherwise, it was capable at all other times to perform the design safety function. At no time during the period from plant startup on March 26 until the Division 2 subsystem was restored to operable status was there an actual demand for the system to operate. This event was thus of minimal significance to the health and safety of the public.
(NOTE: Energy Industry Component Identification codes are annotated as (**XX**).)