Finding | |
|---|---|
| Title | LICENSEE-IDENTIFIED Violation |
| Description | Hope Creek TS 6.8.4.i, lnseryice Testing Program, requires the inservice testing of ASME Code Class 1,2, and 3 components in accordance with the ASME Boiler and Pressure Vessel Code. ASME Code requires that l BCPSV-4425, the RHR shutdown cooling common suction relief valve, a Class 1 valve, be tested every 24 months and that it open within a lift setpoint of +/- 3o/o of the specified code safety valve lift setting. Contrary to this requirement, on November 1, 2010, PSEG identified that l BCPSV-4425 opened above the +/- 3% acceptable range. Since the valve was last tested on October 25,2007, this constituted a failed late surveillance test. PSEG entered this issue into their CAP as notification 20484572. This licensee-identified NCV is of very low safety significance based on a Phase 1 SDP screening, because the relief valve lifted below the maximum rating of the piping. Thus, the condition resulted in the inoperability of the valve, but did not result in a loss of system safety function. |
| Site: | Hope Creek  |
|---|---|
| Report | IR 05000354/2011002 Section 4OA7 |
| Date counted | Mar 31, 2011 (2011Q1) |
| Type: | NCV: Green |
| cornerstone | Mitigating Systems |
| Identified by: | Licensee-identified |
| Inspection Procedure: | |
| Inspectors (proximate) | B Welling J Furia S Barr A Patel A Burritt B Smith C Crisden J Hawkins S Ibarrola L Kern A Turilin |
| INPO aspect | |
| ' | |
Finding - Hope Creek - IR 05000354/2011002 | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Finding List (Hope Creek) @ 2011Q1
Self-Identified List (Hope Creek)
| ||||||||||||||||||||||||||||||||||||||||||