ML20015A519

From kanterella
Revision as of 17:40, 26 January 2020 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
11-WC-2019-12 Public Forms
ML20015A519
Person / Time
Site: Wolf Creek Wolf Creek Nuclear Operating Corporation icon.png
Issue date: 12/14/2019
From: Greg Werner
Operations Branch IV
To:
Wolf Creek
References
Download: ML20015A519 (36)
v • d • e


Text

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew A A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 SRO-U1 I/C 7 7 14 4 4 2 MAJ 2 1 3 2 2 1 TS 2 2 4 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO1 I/C 4 5 9 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO2 I/C 4 4 8 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew B A E Scenarios p V p E 2 3 4 5 T M 0 I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A A T s A B s A B s A B s A B M N y R T 0 R T 0 R T 0 R T 0 L u 0 C p 0 C p 0 C p 0 C p M(*)

T p E R I u RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 1/C 7 +6 4 4 4 2 SRO-U2 13 MAJ 2 1 3 2 2 1 TS 2 21 4-3 0 2 2 RX 0 0 0 1 1 0 R03 NOR 0 0 0 1 1 1 1/C 4 §3 97 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 R04 1/C 4 4 8 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RO RX 1 1 0 D

SRO-I NOR 1 1 1 1/C 4 4 2 SRO-U MAJ 2 2 1 D TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (1/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one 1/C malfunction can be credited toward the two 1/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional 1/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating olant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew C A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RX 0 0 1 1 0 NOR 0 0 1 1 1 SRO-U3 I/C 7 7 4 4 2 MAJ 2 2 2 2 1 TS 2 2 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 SRO-I3 I/C 4 7 7 18 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 2 2 4 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 RO5 I/C 4 4 4 12 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO6 I/C 5 5 10 4 4 2 MAJ 1 1 2 2 2 1 TS 0 0 0 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew D A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RX 0 0 1 1 0 NOR 0 0 1 1 1 SRO-U4 I/C 7 7 4 4 2 MAJ 2 2 2 2 1 TS 2 2 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 SRO-I4 I/C 4 7 7 18 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 2 2 4 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 RO7 I/C 4 5 5 14 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO8 I/C 4 5 9 4 4 2 MAJ 1 1 2 2 2 1 TS 0 0 0 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew E A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U SRO-I1 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 I/C 7 5 7 19 4 4 2 MAJ 1 1 1 3 2 2 1 TS 2 0 2 4 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 SRO-I2 I/C 4 7 5 16 4 4 2 MAJ 1 1 1 3 2 2 1 TS 0 2 0 2 0 2 2 RO9 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 I/C 5 4 5 14 4 4 2 MAJ 1 1 1 3 2 2 1 TS 0 0 0 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO RO RO RO SRO-I SRO-I SRO-I SRO-I SRO-U1 X SRO-U2 X SRO-U3 X SRO-U4 X Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1-9 1-8 1-9 1-8 1-9 1-9 and Conditions Comply with and Use 1-9 1-8 1-9 1-8 1-9 1-9 Procedures (1)

Operate Control Boards (2) CRS CRS CRS CRS CRS CRS Communicate and Interact 1-9 1-8 1-9 1-8 1-9 1-9 Demonstrate Supervisory 1-9 1-8 1-9 1-8 1-9 1-9 Ability (3)

Comply with and Use TS (3) 1,4 2,5 1,4 2,5 1,4 1,4 Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO RO RO RO SRO-I1 X SRO-I2 X SRO-I3 X SRO-I4 X SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1-8 1, 1-8 1-3, 1-9 1,3, 1, 3, 1-8 1-9 1, 3, 1-9 1-8 and Conditions 3-6, 5-6, 5-8 5-6, 5-6, 9 8-9 8-9 Comply with and Use 1-8 1, 1-8 1-3, 1-9 1,3, 1, 3, 1-8 1-9 1, 3, 1-9 1-8 Procedures (1) 3-6, 5-6 5-8 5-6, 5-6, 9 8-9 8-9 Operate Control Boards (2) CRS 1, CRS 1-3, CRS 1,3 1, 3, CRS CRS 1, 3, CRS CRS 3-6, 5-6 5-8 5-6, 5-6, 9 8-9 8-9 Communicate and Interact 1-8 1-9 1-8 1-8 1-9 1-8 1-9 1-8 1-9 1-9 1-9 1-8 Demonstrate Supervisory 1-8 ATC 1-8 ATC 1-9 BOP ATC 1-8 1-9 ATC 1-9 1-8 Ability (3)

Comply with and Use TS (3) 2,5 ATC 3,4 ATC 1,3 BOP ATC 2,5 1,3 ATC 1,3 3,4 Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO1 X RO2 X RO3 X RO4 X SRO-I SRO-I SRO-I SRO-I SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1, 3, 1, 2-4, 1-3, 1, 3, 1, 2-4, 1-3, and Conditions 5-6, 4-8 6-8 5-6, 5-6, 4-8 6-8 5-6, 8-9 8-9 Comply with and Use 1, 3, 1, 2-4, 1-3, 1, 3, 1, 2-4, 1-3, Procedures (1) 5-6, 4-8 6-8 5-6 5-6, 4-8 6-8 5-6 8-9 8-9 Operate Control Boards (2) 1, 3, 1, 2-4, 1-3, 1, 3, 1, 2-4, 1-3, 5-6, 4-8 6-8 5-6 5-6, 4-8 6-8 5-6 8-9 8-9 Communicate and Interact 1-9 1-8 1-9 1-8 1-9 1-8 1-9 1-8 Demonstrate Supervisory ATC BOP BOP ATC ATC BOP BOP ATC Ability (3)

Comply with and Use TS (3) ATC BOP BOP ATC ATC BOP BOP ATC Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO5 X RO6 X RO7 X RO8 X SRO-I SRO-I SRO-I SRO-I SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 2-4, 1-3, 2-3, 1, 1, 2-4, 1, 1,3, 2-3, 2-6, and Conditions 6-8 5-6, 5, 4-8 3-6, 6-8 3-6, 5-8 5, 8 7-9 9 9 7-9 Comply with and Use 2-4, 1-3, 2-3, 1, 1, 2-4, 1, 1,3, 2-3, 2-6, Procedures (1) 6-8 5-6 5, 4-8 3-6, 6-8 3-6, 5-8 5, 8 7-9 9 9 7-9 Operate Control Boards (2) 2-4, 1-3, 2-3, 1, 1, 2-4, 1, 1,3 2-3, 2-6, 6-8 5-6 5, 4-8 3-6, 6-8 3-6, 5-8 5, 8 7-9 9 9 7-9 Communicate and Interact 1-9 1-8 1-9 1-8 1-9 1-9 1-9 1-8 1-9 1-8 Demonstrate Supervisory BOP ATC BOP BOP ATC BOP ATC BOP BOP ATC Ability (3)

Comply with and Use TS (3) BOP ATC BOP BOP ATC BOP ATC BOP BOP ATC Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO9 X RO RO RO SRO-I SRO-I SRO-I SRO-I SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1, 2-3, 2-6, and Conditions 4-8 5, 8 7-9 Comply with and Use 1, 2-3, 2-6, Procedures (1) 4-8 5, 8 7-9 Operate Control Boards (2) 1, 2-3, 2-6, 4-8 5, 8 7-9 Communicate and Interact 1-8 1-9 1-8 Demonstrate Supervisory BOP BOP ATC Ability (3)

Comply with and Use TS (3) BOP BOP ATC Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

IP 21 Operator Licensing Exam Schedule From 10/01/2019 to 09/30/2020 Phase Code: 2 - Construction, 5 - Operational Region: 4

  1. Candidates Exam Site / Docket # / Insp Rpt # RO LSRO SROI SROU Type Exam Author Chief Examiner Examiners Assigned Week 11/03/2019 Wolf Creek / 05000482 / 2019301 FB-OR- Farina, Thomas Doyle,Matthew CAC #: 000956 ONSITE Farina,Thomas VALIDATI Hernandez,Nicholas ON OF Osterholtz,Clyde INITIAL Steely,Christopher LICENSE EXAMIN ATION (OV) 12/08/2019 Wolf Creek / 05000482 / 2019301 9 0 4 4 FB-OR- NFF Farina, Thomas Doyle,Matthew CAC #: 000500 INITIAL Farina,Thomas LICENSE Hernandez,Nicholas EXAM Osterholtz,Clyde ADMINIS Steely,Christopher TRATION (EXAD)

Sites: WC Orgs: ALL Exam Author: ALL Activity Codes: EXAD, NEXAD, NOV, OV 12/20/2019 4:39:33 PM Page 1 of 4

IP 21 Operator Licensing Exam Schedule From 10/01/2019 to 09/30/2020 Phase Code: 2 - Construction, 5 - Operational Region: 4 Summary by Date RO SROI SROU LSRO Total 12/2019 9 4 4 0 17 Sites: WC Orgs: ALL Exam Author: ALL Activity Codes: EXAD, NEXAD, NOV, OV 12/20/2019 4:39:33 PM Page 2 of 4

IP 21 Operator Licensing Exam Schedule From 10/01/2019 to 09/30/2020 Phase Code: 2 - Construction, 5 - Operational Region: 4 Summary by Site RO SROI SROU LSRO Total Wolf Creek 9 4 4 0 17 Sites: WC Orgs: ALL Exam Author: ALL Activity Codes: EXAD, NEXAD, NOV, OV 12/20/2019 4:39:33 PM Page 3 of 4

IP 21 Operator Licensing Exam Schedule From 10/01/2019 to 09/30/2020 Phase Code: 2 - Construction, 5 - Operational Region: 4 Summary by Region RO SROI SROU LSRO Total Region 4 9 4 4 0 17 Sites: WC Orgs: ALL Exam Author: ALL Activity Codes: EXAD, NEXAD, NOV, OV 12/20/2019 4:39:33 PM Page 4 of 4

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew A A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 SRO-U1 I/C 7 7 14 4 4 2 MAJ 2 1 3 2 2 1 TS 2 2 4 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO1 I/C 4 5 9 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO2 I/C 4 4 8 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew B A E Scenarios p V p E 2 3 4 5 T M 0 I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A A T s A B s A B s A B s A B M N y R T 0 R T 0 R T 0 R T 0 L u 0 C p 0 C p 0 C p 0 C p M(*)

T p E R I u RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 1/C 7 +6 4 4 4 2 SRO-U2 13 MAJ 2 1 3 2 2 1 TS 2 21 4-3 0 2 2 RX 0 0 0 1 1 0 R03 NOR 0 0 0 1 1 1 1/C 4 §3 97 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 R04 1/C 4 4 8 4 4 2 MAJ 2 1 3 2 2 1 TS 0 0 0 0 2 2 RO RX 1 1 0 D

SRO-I NOR 1 1 1 1/C 4 4 2 SRO-U MAJ 2 2 1 D TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (1/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one 1/C malfunction can be credited toward the two 1/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional 1/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicant's competence count toward the minimum requirements specified for the applicant's license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating olant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew C A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RX 0 0 1 1 0 NOR 0 0 1 1 1 SRO-U3 I/C 7 7 4 4 2 MAJ 2 2 2 2 1 TS 2 2 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 SRO-I3 I/C 4 7 7 18 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 2 2 4 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 RO5 I/C 4 4 4 12 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO6 I/C 5 5 10 4 4 2 MAJ 1 1 2 2 2 1 TS 0 0 0 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew D A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RX 0 0 1 1 0 NOR 0 0 1 1 1 SRO-U4 I/C 7 7 4 4 2 MAJ 2 2 2 2 1 TS 2 2 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 SRO-I4 I/C 4 7 7 18 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 2 2 4 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 RO7 I/C 4 5 5 14 4 4 2 MAJ 2 1 1 4 2 2 1 TS 0 0 0 0 0 2 2 RX 0 0 0 1 1 0 NOR 0 0 0 1 1 1 RO8 I/C 4 5 9 4 4 2 MAJ 1 1 2 2 2 1 TS 0 0 0 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Crew E A E Scenarios P V 2 3 4 5 T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U SRO-I1 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 I/C 7 5 7 19 4 4 2 MAJ 1 1 1 3 2 2 1 TS 2 0 2 4 0 2 2 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 SRO-I2 I/C 4 7 5 16 4 4 2 MAJ 1 1 1 3 2 2 1 TS 0 2 0 2 0 2 2 RO9 RX 0 0 0 0 1 1 0 NOR 0 0 0 0 1 1 1 I/C 5 4 5 14 4 4 2 MAJ 1 1 1 3 2 2 1 TS 0 0 0 0 0 2 2 RO RX 1 1 0 NOR 1 1 1 SRO-I I/C 4 4 2 SRO-U MAJ 2 2 1 TS 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: Wolf Creek Date of Exam: December 2019 Operating Test No.: Spare A E Scenarios P V 1 (Spare) T M P E O I L N CREW CREW POSITION CREW POSITION CREW POSITION T N I T POSITION I

C A S A B S A B S A B S A B M A T L R T O R T O R T O R T O U N Y O C P O C P O C P O C P M(*)

T P E R I U RO RX 0 0 1 1 0 NOR 0 0 1 1 1 SRO-I I/C 7 7 4 4 2 SRO-U MAJ 1 1 2 2 1 X

TS 2 2 0 2 2 RO RX 0 0 1 1 0 NOR 0 0 1 1 1 SRO-I X I/C 7 7 4 4 2 SRO-U MAJ 1 1 2 2 1 TS 2 2 0 2 2 RO RX 0 0 1 1 0 X

SRO-I NOR 0 0 1 1 1 I/C 5 5 4 4 2 SRO-U MAJ 1 1 2 2 1 TS 0 0 0 2 2 RO RX 0 0 1 1 0 X

SRO-I NOR 0 0 1 1 1 I/C 4 4 4 4 2 SRO-U MAJ 1 1 2 2 1 TS 0 0 0 2 2 Instructions:

1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO RO RO RO SRO-I SRO-I SRO-I SRO-I SRO-U1 X SRO-U2 X SRO-U3 X SRO-U4 X Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1-9 1-8 1-9 1-8 1-9 1-9 and Conditions Comply with and Use 1-9 1-8 1-9 1-8 1-9 1-9 Procedures (1)

Operate Control Boards (2) CRS CRS CRS CRS CRS CRS Communicate and Interact 1-9 1-8 1-9 1-8 1-9 1-9 Demonstrate Supervisory 1-9 1-8 1-9 1-8 1-9 1-9 Ability (3)

Comply with and Use TS (3) 1,4 2,5 1,4 2,5 1,4 1,4 Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO RO RO RO SRO-I1 X SRO-I2 X SRO-I3 X SRO-I4 X SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1-8 1, 1-8 1-3, 1-9 1,3, 1, 3, 1-8 1-9 1, 3, 1-9 1-8 and Conditions 3-6, 5-6, 5-8 5-6, 5-6, 9 8-9 8-9 Comply with and Use 1-8 1, 1-8 1-3, 1-9 1,3, 1, 3, 1-8 1-9 1, 3, 1-9 1-8 Procedures (1) 3-6, 5-6 5-8 5-6, 5-6, 9 8-9 8-9 Operate Control Boards (2) CRS 1, CRS 1-3, CRS 1,3 1, 3, CRS CRS 1, 3, CRS CRS 3-6, 5-6 5-8 5-6, 5-6, 9 8-9 8-9 Communicate and Interact 1-8 1-9 1-8 1-8 1-9 1-8 1-9 1-8 1-9 1-9 1-9 1-8 Demonstrate Supervisory 1-8 ATC 1-8 ATC 1-9 BOP ATC 1-8 1-9 ATC 1-9 1-8 Ability (3)

Comply with and Use TS (3) 2,5 ATC 3,4 ATC 1,3 BOP ATC 2,5 1,3 ATC 1,3 3,4 Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO1 X RO2 X RO3 X RO4 X SRO-I SRO-I SRO-I SRO-I SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1, 3, 1, 2-4, 1-3, 1, 3, 1, 2-4, 1-3, and Conditions 5-6, 4-8 6-8 5-6, 5-6, 4-8 6-8 5-6, 8-9 8-9 Comply with and Use 1, 3, 1, 2-4, 1-3, 1, 3, 1, 2-4, 1-3, Procedures (1) 5-6, 4-8 6-8 5-6 5-6, 4-8 6-8 5-6 8-9 8-9 Operate Control Boards (2) 1, 3, 1, 2-4, 1-3, 1, 3, 1, 2-4, 1-3, 5-6, 4-8 6-8 5-6 5-6, 4-8 6-8 5-6 8-9 8-9 Communicate and Interact 1-9 1-8 1-9 1-8 1-9 1-8 1-9 1-8 Demonstrate Supervisory ATC BOP BOP ATC ATC BOP BOP ATC Ability (3)

Comply with and Use TS (3) ATC BOP BOP ATC ATC BOP BOP ATC Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO5 X RO6 X RO7 X RO8 X SRO-I SRO-I SRO-I SRO-I SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 2-4, 1-3, 2-3, 1, 1, 2-4, 1, 1,3, 2-3, 2-6, and Conditions 6-8 5-6, 5, 4-8 3-6, 6-8 3-6, 5-8 5, 8 7-9 9 9 7-9 Comply with and Use 2-4, 1-3, 2-3, 1, 1, 2-4, 1, 1,3, 2-3, 2-6, Procedures (1) 6-8 5-6 5, 4-8 3-6, 6-8 3-6, 5-8 5, 8 7-9 9 9 7-9 Operate Control Boards (2) 2-4, 1-3, 2-3, 1, 1, 2-4, 1, 1,3 2-3, 2-6, 6-8 5-6 5, 4-8 3-6, 6-8 3-6, 5-8 5, 8 7-9 9 9 7-9 Communicate and Interact 1-9 1-8 1-9 1-8 1-9 1-9 1-9 1-8 1-9 1-8 Demonstrate Supervisory BOP ATC BOP BOP ATC BOP ATC BOP BOP ATC Ability (3)

Comply with and Use TS (3) BOP ATC BOP BOP ATC BOP ATC BOP BOP ATC Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Instructions:

Check the applicants license type and enter one or more event numbers that will allow the examiners to evaluate every applicable competency for every applicant. (This includes all rating factors for each competency.) (Forms ES 303 1 and ES 303 3 describe the competency rating factors.)

ES-301 Competencies Checklist Form ES-301-6 Facility: Wolf Creek Date of Examination: December 2019 Operating Test No.:

APPLICANTS RO9 X RO RO RO SRO-I SRO-I SRO-I SRO-I SRO-U SRO-U SRO-U SRO-U Competencies SCENARIO SCENARIO SCENARIO SCENARIO 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Interpret/Diagnose Events 1, 2-3, 2-6, and Conditions 4-8 5, 8 7-9 Comply with and Use 1, 2-3, 2-6, Procedures (1) 4-8 5, 8 7-9 Operate Control Boards (2) 1, 2-3, 2-6, 4-8 5, 8 7-9 Communicate and Interact 1-8 1-9 1-8 Demonstrate Supervisory BOP BOP ATC Ability (3)

Comply with and Use TS (3) BOP BOP ATC Notes:

(1) Includes TS compliance for an RO.

(2) Optional for an SRO-U.

(3) Only applicable to SROs.

Retrieved from "https://kanterella.com/w/index.php?title=ML20015A519&oldid=2330525"