ML12349A285
| ML12349A285 | |
| Person / Time | |
|---|---|
| Site: | Calvert Cliffs  |
| Issue date: | 11/09/2012 |
| From: | Constellation Energy Nuclear Group, EDF Group |
| To: | Office of Nuclear Reactor Regulation |
| References | |
| Download: ML12349A285 (94) | |
Text
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: T N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1A1 Equipment Class: (17) Engine-Generators Equipment
Description:
WA1 DIESEL ENGINE Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): DG, 45.00 ft, CAL-DGB1-DB102 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage verified by drawing 85108 and Caic. D-C-92-027 Pg. 21 that shows 1-1/2" diameterbolts, which is consistent with equipment anchorage.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-150
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: EiJ N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDGIA1 Equipment Class: (17) Engine-Generators Equipment
Description:
WA1 DIESEL ENGINE
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes Attached piping connected via bellows having adequateflexibility, therefore no seismic concern.
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-151
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDGIA1 Equipment Class: (17) Engine-Generators Equipment
Description:
WA1 DIESEL ENGINE 1ENGEDGIAl 8-15-12 020 1ENGEDGIA1 8-15-12 021 1ENGEDGIA1 8-15-12 022 C-152
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: T] N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1A1 Equipment Class: (17) Engine-Generators inmant r)prrintinn" F:NrMPIN 1A1 nfl.F5~F 1ENGEDGIA1 8-15-12 023 1ENGEDGIA1 8-15-12 024 1ENGEDGIA1 8-15-12 025 C-1 53
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1A1 Equipment Class: (17) Engine-Generators Equipment
Description:
WA1 DIESEL ENGINE
-I l-mf.0-I it -,IQ'] M-1 -- '17.11 VI 1ENGEDG1A1 8-15-12 031 C-154
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: I ENGEDG1A1 Equipment Class: (17) Engine-Generators Equipment
Description:
IAi nIF.REL ENrINE 1t=NUEUU)(1A1 13-lb-12 UX12 1ENGEDGIA1 8-15-12 033 C-155
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: -T N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1A1 Equipment Class: (17) Engine-Generators ioment Descrinotion: 1A1 DIESEL ENGINE 1ENGEDGIAl 8-15-12 034 1FNr.Fnr.lAl R-1-R-19 WAA 1ENGEDG1Al 8-15-12 036 I 1ENGEDGIAl B-15-12 037 C-1 56
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1Al Equipment Class: (17) Engine-Generators Enuinmpnt Depcrintion: WA1DIESEL ENGINE 1ENUEDUlAl 8-15-12 039 1ENGEDGIA1 8-15-12 040 C-157
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y [ U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDGIB Equipment Class: (17) Engine-Generators Equipment
Description:
EMERGENCY DIESEL GENERATOR 1B Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 45.00 ft, CAL-AB-421 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? No Concrete crack approximately Y2" wide nearcomer anchor. Need to determine if condition is seismically acceptable. CR-2012-009322
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage verified by drawing C-488.
- 6. Based on the above anchorage evaluations, is the anchorage free of No potentially adverse seismic conditions?
Interaction Effects C-158
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y jij U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1B Equipment Class: (17) Engine-Generators Equipment
Description:
- 7. Are soft targets free from impact by nearby equipment or structures? Yes Masonry block walls, identified as A21 and A24 on drawing A-259, are safety-related and thus seismically ratedper IEBulletin 80-11.
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
Overhead lights in zone of influence of tubing and gages.
10/3/12 - Overheadlights were deemed not a credible seismic concern due to their lightweight and to typical constructionpractices. Also, they have been previously evaluatedby CCNPPand found seismically acceptable.
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: /'"
- A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-159
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y -4 U Seismic Walkdown Checklist (SWC)
Equipment ID No.: I ENGEDGI B Equipment Class: (17) Engine-Generators EnuinmAnt Dcdrintionn EMERGENCY DIESEL GENERATOR 1B FmT--
7Th 1ENGED611B 8-13-12 112 1ENGEDG1B 8-13-12 113 C-160
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y EE U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDGIB Equipment Class: (17) Engine-Generators Equipment
Description:
EMERGENCY DIESEL GENERATOR 1B 1ENGEDGIB 8-13-12 114 1ENGEDGIB 8-13-12 115 C-161
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y [-N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDGIB Equipment Class: (17) Engine-Generators r-.. &:....
r* *.. r'-zirnnr' ir.tr-k*,l nirnI" r.P P'r--ilrn rA-Tflr- Arn 1ENGEDGIB 8-13-12 116 1ENGEDGIB 8-13-12 117 C-162
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y K U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG11B Equipment Class: (17) Engine-Generators inmant 1"Awrrintinn- EMERGENCY DIESEL GENERATOR 1B I t=NUtUU1 tS 15-1 J-1 Z I I tS I LNU LUU 1 U U-1 J- I Z 1113 C-163
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y l U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1B Equipment Class: (17) Engine-Generators Equipment
Description:
EMERGENCY DIESEL GENERATOR 1B 1ENGEDGIB 8-13-12 121 IIP-NM,;-I )(411H K-1:-" 17,11 IENGEDGIB 8-13-12 122 1ENGEDGIB 8-13-12 123 C-164
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y F-] U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1ENGEDG1B Equipment Class: (17) Engine-Generators Equipment
Description:
EMERGENCY DIESEL GENERATOR 1B 1ENGEDGIB 8-13-12 124 1ENGEDGIB 8-13-12 125 1ENGEDGIB 8-13-12 126 C-165
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: T N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans Equipment
Description:
ECCS PP RM CLR 12 FAN A Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, -15.00 ft, CAL-AB-118 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% YEes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Bottom of equipment is bolted to C5 by 2 3/16 F-F bolts at each end. C5 is welded to embed steel in the wall at one end and to anotherC5, which in turn is welded to embeds at each end on the other side of the fan unit. Top of fan is welded to 3 angle frames. Frames are braced to each other and welded to angle runners which in turn are weld to ceiling embeds at 4 places per runner. Need documentation to verify anchorageconfiguration.
Walkdown as-built anchoragedescription is consistent with drawing 63517 sheet 2.
C-166
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans Equipment
Description:
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: " A. Karavoussianis Date: 11/09/2012 C-167
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans Equipment
Description:
ECCS PP RM CLR 12 FAN A C. Figliolini 11/09/2012 Photos 1FAN0448A 8-7-12 220 1FAN0448A 8-7-12 221 C-168
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans Equipment
Description:
ECCS PP RM CLR 12 FAN A 1FAN0448A 8-7-12 222 11-ANU446A U-1-12 223 C-169
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans Equipment
Description:
ECCS PP RM CLR 12 FAN A 1FAN0448A 8-1-12 224 II-.O,N114111"iA X./.17 )'7/
1 FANU448A 5-7-12 225 1FAN0448A 8-7-12 229 C-170
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: [7- N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans Equipment
Description:
ECCS PP RM CLR 12 FAN A 1FAN0448A 8-7-12 230
'11"ANMIIM M X
- A .. 7:411 1FAN0448A 8-7-12 232 C-171
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FAN0448A Equipment Class: (9) Fans inmAnt nl'Arinninnn ECCS PP RM CLR 12 FAN A 1FAN0448A 8-7-12 234 I t-ANU440A U-f-U ZJO C-172
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10546 Equipment Class: (9) Fans Equipment
Description:
ELEC ROOMS EXH FAN (F-12)
Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): DG, 45.00 ft, CAL-DGB1-DB102 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% No of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Not Applicable This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-173
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: T N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10546 Equipment Class: (9) Fans Equipment
Description:
ELEC ROOMS EXH FAN (F-12)
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes Lines attached to equipment consist of flex conduit and the fan is connected to ductwork via bellows, both having adequateflexibility, therefore no seismic concern.
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-174
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10546 Equipment Class: (9) Fans Equipment
Description:
ELEC ROOMS EXH FAN (F-12) 1FANHVAC1 0546 8-15-12 041 1FANHVAC1 0546 8-15-12 042 1FANHVAC10546 8-15-12 043 C-175
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: MI N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10546 Equipment Class: (9) Fans Equipment
Description:
ELEC ROOMS EXH FAN (F-12) 1FANHVAC10546 5-15-12 046 I I-ANNVAUI U0410 U-1 0-1 Z U40 C-1 76
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: [ N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10546 Equipment Class: (9) Fans Equipment
Description:
ELEC ROOMS EXH FAN (F-12) 1FANHVAG10546 B-15-12 047 I I-ANNVAUI U04t U-1 0-1 Z U4t$
C-177
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10562 Equipment Class: (9) Fans Equipment
Description:
Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): DG, 89.00 ft, CAL-DGB1-DB307 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% YEes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: No This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage is consistenthowever mounting detail substitutedlock washers for double nuts. Anchorage verified by drawings 85-051-E. CR-2012-009658
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
The mounting detail substituted is not an adverse seismic condition, but simple a documentation issue.
Interaction Effects C-178
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10562 Equipment Class: (9) Fans Equipment
Description:
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes Lines attachedto equipment consist of flex conduit having adequate flexibility, therefore no seismic concern.
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: / A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-179
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC1 0562 Equipment Class: (9) Fans inmant Fl*arrintinn" BATTERY RM EXH FAN (F-8) 1FANHVAC10562 5-15-12 086 1FANHVAC10562 8-15-12 088 1FANHVAC10562 8-15-12 089 C-1 80
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10562 Equipment Class: (9) Fans Equipment
Description:
BATTERY RM EXH FAN (F-8) 1FANHVAC10562 8-15-12 090 1FANHVAC10562 8-15-12 091 1FANHVAC10562 8-15-12 092 C-181
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10562 Equipment Class: (9) Fans Equipment
Description:
Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10565 Equipment Class: (9) Fans Equipment
Description:
DG BLDG SR SYS SUPP FAN (F-10)
Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): DG, 89.00 ft, CAL-DGB1-DB307 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% No of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes Equipment was observed from the floor; the fan is about 25' overhead.
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Not Applicable This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
C-182
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: -T] N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10565 Equipment Class: (9) Fans Equipment
Description:
DG BLDG SR SYS SUPP FAN (F-10)
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Lines attachedto equipment consist of flex conduit and flexible hose, both having adequateflexibility, therefore no seismic concern.
Interaction Effects
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: / " A. Karavoussianis Date: 11/09/2012 C-183
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10565 Equipment Class: (9) Fans Equipment
Description:
DG BLDG SR SYS SUPP FAN (F-10)
C. Figliolini 11/09/2012 Photos 1FANHVAC10565 8-15-12 094 1FANHVAC10565 8-15-12 095 1FANHVAC1 0565 8-15-12 096 1FANHVAC1 0565 8-15-12 097 C-184
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVAC10565 Equipment Class: (9) Fans Equipment
Description:
DG BLDG SR SYS SUPP FAN (F-10) 1FIANHVAU1 U565 5-15~-12 U96 1FANHVAC10565 8-15-12 100 C-185
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y Fj U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRS11 Equipment Class: (9) Fans Equipment
Description:
11 SWGR RM SPLY FAN Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 70.00 ft, CAL-AB-524 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? No One anchorbolt is corroded and so is its plate. CR-2012-009535
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: No This question only applies ifthe item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage has been modified. Need to determine if anchorageconfiguration is consistent with plant documentation. CR-2012-009730
- 6. Based on the above anchorage evaluations, is the anchorage free of No potentially adverse seismic conditions?
Interaction Effects C-186
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y Y- U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRS11 Equipment Class: (9) Fans Equipment
Description:
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
Overheadlight if not I/I may fall on equipment.
10/3/12 - Overhead lights were deemed not a credible seismic concern due to their lightweight and to typical construction practices. Also, they have been previously evaluated by CCNPPand found seismically acceptable.
- 9. Do attached lines have adequate flexibility to avoid damage? Yes Lines attachedto equipment consist of flexible instrumentationtubing. Also, ductwork is well supportedand braced and is attached to the AHU via a bellows. All attachment have adequate flexibility, therefore no seismic concern.
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Fan 1FANHVACSWGRS1 1 is integral to the overall HVACSWGRS1 1 air handling unit. The anchorage and spatial interactions for the air handling unit were evaluated as a whole.
Evaluated by: 1. - A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-187
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y W-I U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRS11 Equipment Class: (9) Fans oment Descdntion: 11 SWGR RM SPLY F) 1FANHVACSWGRS11 8-10-12 120 1FANHVACSWGRS11 8-10-12 121 I I-ANNVAL;bVVUKbl I t$-I U-1 Z I ZZ I hANNVAkUSWVUXbI I t$-IU-1 Z I Z C-188
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: YNI U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRSI1I Equipment Class: (9) Fans Fnijinmant fnlarwrintinn" 11 SWGR RM SPLY FAN 1FANHVACSWGRS1 1 8-1 0-12 124 1FANHVACSWGRS11 8-10-12 125 1FANHVACSWGRS11 8-10-12 126 1FANHVACSWGRS11 8-10-12 127 C-189
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y WI U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRS11I Equipment Class: (9) Fans linmant IlAwr-rintinn- 11 SWGR RM SPLY FAN 1FANHVACSWGRS11 8-10-12 128 1FANHVACSWGRS11 8-10-12 129 C-1 90
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: YF-N-- u Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRS11 Equipment Class: (9) Fans Equipment
Description:
11 SWGR RM SPLY FAN 1FANHVACSWGRS11 8-10-12 130 1FANHVACSWGRS11 8-10-12 131 C-191
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y -N] U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FANHVACSWGRS11 Equipment Class: (9) Fans Equipment
Description:
11 SWGR RM SPLY FAN 1I-ANHVALUSWUKbI1 U5-1-12 1352 1FANHVACSWGRS11 8-10-12 133 1t-ANHVAU;5WL*Kb11 B-lU-12 134 C-192
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y EW U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT321 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
HPSI FLOW TO LOOP 11B Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 5.00 ft, CAL-AB-224 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Y Ds of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: No This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage verified by Drawings 65300 sheet 3 and 91005 (J- 104). The web of the support channel is not fully welded to the wall anchorplates. The channel's web weld is approximately3" long instead of being continuous. CR-2012-009348
- 6. Based on the above anchorage evaluations, is the anchorage free of No potentially adverse seismic conditions?
C-193
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y [W] U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT321 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
HPSI FLOW TO LOOP 11B Interaction Effects
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-194
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y [-R] U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT321 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
HPSI FLOW TO LOOP 11B 11-1321 --6-12 101 1FT321 8-6-12 108 C-195
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y [- U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT321 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
HPSI FLOW TO LOOP 11B 1FT321 8-6-12 109 1FT321 8-6-12 111 C-196
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y EE-- u Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT321 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
HPSI FLOW TO LOOP 11 B 1FT321 8-6-12 112 C-197
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT322 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
LPSI FLOW TO LOOP 11B Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 5.00 ft, CAL-AB-224 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchoraae 1: Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: No This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage verified by Drawing 91005 (J-104). The web of the support channel is not fully welded to the wall anchorplates. The channel's web weld is approximately 3" long instead of being continuous. CR-2012-009348
- 6. Based on the above anchorage evaluations, is the anchorage free of No potentially adverse seismic conditions?
Interaction Effects C-198
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: YE U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT322 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: "
- A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-199
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y l U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT322 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
LPSI FLOW TO LOOP 11 B 11- 1322 U-5-12 113 1i- IA-T.J M. 1I4 viaVJ 11-F322 -b-12 115 1FT322 8-6-12 117 C-200
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y l U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1FT322 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
LPSI FLOW TO LOOP 11 B I t- I JZZ ts-b-lz I I U C-201
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1GDHVAC/A-228 Equipment Class: (10) Air Handlers Equipment
Description:
11 SWGR HVAC DISCH GRAV DMPR Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 70.00 ft, CAL-AB-524 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchora-qe
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% IS0o of SWEL items requiring such verification)?
This damperis part of AHU 11SWGRHVAC.
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Not Applicable
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Not Applicable
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Not Applicable
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Not Applicable This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-202
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1GDHVAC/A-228 Equipment Class: (10) Air Handlers Equipment
Description:
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Rule-of-Box to 1ISWGRHVAC Evaluated by: / 4 A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-203
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: I GDHVACIA-228 Equipment Class: (10) Air Handlers inmpnt DA*trrintinn" 11 SWGR HVAC DISCH GRAV DMPR 1GDHVAC#A-228 8-10-12 112 I UUMVAUA-ZU~ U-1U-1~Z I1I C-204
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1GDHVAC/A-228 Equipment Class: (10) Air Handlers Equipment
Description:
11 SWGR HVAC DISCH GRAV DMPR 1iUUMVAUA-ZU~ t5-1U-IZ 114 C-205
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXCC11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
COMPONENT COOLING HEAT EXCH 11 Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 5.00 ft, CAL-AB-228 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies ifthe item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage is verified by drawing FSK-C-0084.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-206
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXCC11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
COMPONENT COOLING HEAT EXCH 11
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
Scaffold to the west side of heat exchangeris tagged as seismic, therefore no concern.
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-207
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXCC11 Equipment Class: (21) Tanks and Heat Exchangers inmant narzrintinn- COMPONENT COOLING HEAT EXCH 11 1HXCC11 8-7-12 164 1HXCC11 8-7-12 165 1HXCC11 8-7-12 166 C-208
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: MI N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXCC11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
COMPONENT COOLING HEAT EXCH 11 q
9 , -
AW 1HXCC11 8-7-12 169 1HXCC11 8-7-12 168 C-209
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXCC11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
COMPONENT COOLING HEAT EXCH 11 1HXGG11 B-7-12 170 1HXrr.11 R-7-19 171 1HXCC11 8-7-12 172 1HXCC11 8-7-12 173 C-21 0
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: r N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXCC11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
COMPONENT COOLING HEAT EXCH 11 1INAL.A11 8-(-1Z 1(4 1 HAU;11 3-7-12 175 C-211
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: [ N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXHVACSWGRCU11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11 SWGR HVAC CNDSR UNIT Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 70.00 ft, CAL-AB-ARF Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Not Applicable Equipment is anchored to steel protrudingfrom roof.
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage is consistent with drawing 15869-0001 SHOO01 Rev. 0.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-212
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: [-Y N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXHVACSWGRCU11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Not Applicable masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: /*" ' A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-213
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXHVACSWGRCU1 1 Equipment Class: (21) Tanks and Heat Exchangers Einuinmpnt Dn.qrrintinn' 11 SWGR HVAC CNDSR UNIT 1HXHVACSWGRCU11 8-13-12 002 1HXHVACSWGRCU11 8-13-12 003 1HXHVACSWGRCU1 1 8-13-12 004 C-214
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXHVACSWGRCU 11 Equipment Class: (21) Tanks and Heat Exchangers Eauinment Descrintinn: 11 SWGR HVAC CNDSR UNIT 1HXHVACSWGRCU11 8-13-12 006
-IrIA IIV1At ..-'%Vvt-il'1 . 1-12-1 *- 1 I 1 1I-I IHXHVACSWGRCU11 8-13-12 007 1HXHVACSWGRCU11 8-13-12 008 C-215
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXHVACSWGRCU11 Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11 SWGR HVAC CNDSR UNIT 1HXHVACSWGRCUl 1 8-13-12 009 1HXHVACSWGRCU11 8-13-12 010 1HXHVACSWGRCU11 8-13-12 011 1HXHVACSWGRCU11 8-13-12 012 C-216
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXHVACSWGRCU11 Equipment Class: (21) Tanks and Heat Exchangers iDment DescriDtion: 11 SWGR HVAC CNDSR UNIT 11 Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11 B SERVICE WATER PHE Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 5.00 ft, CAL-AB-226 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchoraae
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? No C-217
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: V N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11B SERVICE WATER PHE Only one anchorhex bolt has a washer, the others do not (slotted end). All four have the main plate washer. CR-2012-009630
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Not Applicable
- 5. Is the anchorage configuration consistent with plant documentation? (Note: No This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage is consistent however it is missing washers, see note 2 on drawing 15077-0002. Anchorage verified by drawing 15077-0002 SHOO04 Rev 1.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
10/2/12 - The missing washers do not adversely affect the equipment's anchorage,therefore there is no potentialseismic concern. This is simple a documentation issue.
Interaction Effects
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes C-218
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11B SERVICE WATER PHE potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: "
- A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-219
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks an d Heat Exchangers linmont row-'rintinn- 1 R 5RI:P%/Ii -WATER PHE I tiAbKvv I I ts U-I U-1 z uuz C-220
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11 B SERVICE WATER PHE 1HXSRWl 1B 8-16-12 004 1HXSRWl 1B 8-16-12 003 C-221
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11B SERVICE WATER PHE 1HXSRW11B 8-16-12 005 I HAbSHW1 Id I -1 b-1Z z O{*
C-222
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Mi N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers Equipment
Description:
11B SERVICE WATER PHE M i k,'".' -=
1H X
.*N I I H H1"-1 " f1{17 11"x .1I-w%11 I RX-H.K.I") I U Im 11 1HXSRWl 1B 8-16-12 010 C-223
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M-I N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1HXSRW11B Equipment Class: (21) Tanks and Heat Exchangers EauiDment DescdrDtion: 11B SERVICE WATER PHE W/S/ / /6-1 W1 8-1 1 1HXSRWII1B 8-16-12 011 C-224
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1L15611A Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
COND STORAGE TANK 12 Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 45.00 ft, CAL-AB-430 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchoracqe
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The cabinet is anchoredthrough a welded 3"x3"x1/4", 4'-0" long angles along the sides of the cabinet by fillets that are 2" long at 6.5" centers. Each angle is anchored to the concrete floor by 4 - 1/2" CEA at 15" centers.
Walkdown as-built anchoragesketch is consistent with drawing 61913 sheet I section D.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
C-225
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: Y N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1L15611A Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
COND STORAGE TANK 12 Interaction Effects
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
Masonry block walls, identified as QQ and A31 on drawing A-259, are safety-related and thus seismically rated per IE Bulletin 80-11.
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 C-226
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: I- N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1L15611A Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
COND STORAGE TANK 12 Photos 1L15611A 8-16-12 132 1LI5611A 8-16-12 133 C-227
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1L15611A Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
COND STORAGE TANK 12 ILIOM 1A U-Ib-U 134 1LI5611A 8-16-12 135 C-228
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M-] N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1LI5611A Equipment Class: (20) Instrumentation and Control Panels and Cabinets inmant fr*_rrintinn- COND STORAGE TANK 12 I Ubtfl 1A t$-W-12 13fd 1LI5511A U-16-12 131 C-229
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: lLT1565 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
SERV WTR HEAD TNK 12 LEVEL Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 70.00 ft, CAL-AB-524 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Yes of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage is consistent with drawings 65426 sheet 3 and 91004 (J-103),
except for the CEA that are 1/2" insteadof 3/8". However, drawing 65426 refers to its support as being similar to J- 103, therefore using J- 103 as the minimum requirement.Anchoragejudged consistent.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
C-230
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: lLT1565 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
SERV WTR HEAD TNK 12 LEVEL Interaction Effects
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes Lines attached to equipment consist of flex conduit and flexible tubing, both having adequate flexibility, therefore no seismic concern.
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-231
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: lLT1565 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
SERV WTR HEAD TNK 12 LEVEL 1LT1565 8-10-12 102 1LT1565 8-10-12 104 1LT1565 8-10-12 106 C-232
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1LT4142 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
REFUEL WTR TNK 11 LEVEL Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 45.00 ft, CAL-AB-439 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% Y es of SWEL items requiring such verification)?
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Yes This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage is consistent with drawings 65862 sheet 3 and FSK-M-0026.
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-233
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: T N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1LT4142 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
REFUEL WTR TNK 11 LEVEL
- 7. Are soft targets free from impact by nearby equipment or structures? Yes
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
Overheadlight is not a credible hazard because there are obstructions in its path.
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-234
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: r N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1LT4142 Equipment Class: (20) Instrumentation and Control Panels and Cabinets Equipment
Description:
REFUEL WTR TNK 11 LEVEL 1LT4142 8-13-12 276 1LT4142 8-13-12 277 1LT4142 8-13-12 279 C-235
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horizontal Pumps Equipment
Description:
FUEL POOL COOLING PUMP 11 Project: CCNPP 1 SWEL Location (Bldg, Elev, Room/Area): AUX, 27.00 ft, CAL-AB-320 Manufacturer/Model:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
- 1. Is anchorage configuration verification required (i.e., is the item one of the 50% No of SWEL items requiring such verification)?
This is the motor to pump OPUMPSFP11, motor and pump are on the same skid.
- 2. Is the anchorage free of bent, broken, missing or loose hardware? Yes
- 3. Is the anchorage free of corrosion that is more than mild surface oxidation? Yes
- 4. Is the anchorage free of visible cracks in the concrete near the anchors? Yes
- 5. Is the anchorage configuration consistent with plant documentation? (Note: Not Applicable This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
- 6. Based on the above anchorage evaluations, is the anchorage free of Yes potentially adverse seismic conditions?
Interaction Effects C-236
ATTACHMENT 3 WALKDOWN CHECKLISTS Status:
- N U Seismic Walkdown Checklist (SWC)
Equipment IDNo.: 1MB411 Equipment Class: (5) Horizontal Pumps Equipment
Description:
FUEL POOL COOLING PUMP 11
- 7. Are soft targets free from impact by nearby equipment or structures? Yes Overheadlight may fall and break sight glass.
10/3/12 - Overhead lights were deemed not a credible seismic concern due to their lightweight and to typical constructionpractices. Also, they have been previously evaluated by CCNPPand found seismically acceptable.
- 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and Yes masonry block walls not likely to collapse onto the equipment?
- 9. Do attached lines have adequate flexibility to avoid damage? Yes
- 10. Based on the above seismic interaction evaluations, is equipment free of Yes potentially adverse seismic interaction effects?
Other Adverse Conditions
- 11. Have you looked for and found no adverse seismic conditions that could Yes adversely affect the safety functions of the equipment?
Comments SWEL 2 Evaluated by: A. Karavoussianis Date: 11/09/2012 C. Figliolini 11/09/2012 Photos C-237
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: MI N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horizontal Pumps Equipment
Description:
FUEL POOL COOLING PUMP 11 IKRAllI R nN~'*f',l 1MB411 8-10-12 068 1MB411 8-10-12 069 C-238
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horizontal Pumps J--
1Mb41I1 *-10-1Z UfO 1MB411 8-10-12 071 C-239
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horizontal Pumps iinmant l"acrrintinn- FUEL POOL COOLING PUMP 11 1MB411 8-10-12 072 1M1411 8-1 U-1 2 073 C-240
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: r N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horizontal Pumps Equipment
Description:
FUEL POOL COOLING PUMP 11 1ML3411 b-1U-12 U14 1MB411 5-1U-12 ZU5 C-241
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: -TNU Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horizontal Pumps Equipment
Description:
FUEL POOL COOLING PUMP 11 I ME341 1 U-1 U-1 Z U lb C-242
ATTACHMENT 3 WALKDOWN CHECKLISTS Status: M N U Seismic Walkdown Checklist (SWC)
Equipment ID No.: 1MB411 Equipment Class: (5) Horiz ontal Pumps Pe:-mtinmant n'oar-Hnfinn. 1=H1=1Dt
)OL COOLING PUMP 11 1MB411 8-10-12 080 1ME3411 8-10-12 079 C-243