ML071150356

From kanterella
Revision as of 03:33, 24 October 2018 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Salem Nuclear Generating Station, Unit No. 2, Technical Specifications Elimination of Requirements for Hydrogen Recombiners and Hydrogen Analyzers Using the Consolidated Line Item Improvement Process (TAC No. MD2329)
ML071150356
Person / Time
Site: Salem PSEG icon.png
Issue date: 04/19/2007
From: Richard Ennis
NRC/NRR/ADRO/DORL/LPLI-2
To:
Ennis R B, NRR/DORL, 415-1420
Shared Package
ML070930262 List:
References
TAC MD2329
Download: ML071150356 (4)


Text

-4 (2) Technical Specifications and Environmental Plan The Technical Specifications contained in Appendices A and B, as revised through iAmendment No.264 , are hereby incorporated in the license. The licensee shall operate the facility in accordance with the Technical Specifications.

(3) Special Low Power Test Program PSE&G shall complete the training portion of the Special Low Power Test Program in accordance with PSE&G's letter dated September 5, 1980 and in accordance with the Commission's Safety Evaluation Report "Special Low Power Test Program", dated August 22, 1980 (See Amendment No. 2 to DPR-75 for the Salem Nuclear Generating Station, Unit No. 2) prior to operating the facility at a power level above five percent.Within 31 days following completion of the power ascension testing program outlined in Chapter 13 of the Final Safety Analysis Report, PSE&G shall perform a boron mixing and cooldown test using decay heat and Natural Circulation.

PSE&G shall submit the test procedure to the NRC for review and approval prior to performance of the test. The results of this test shall be submitted to the NRC prior to starting up following the first refueling outage.(4) Initial Test Program PSE&G shall conduct the post-fuel-loading initial test program (set forth in Chapter 13 of the Final Safety Analysis Report, as amended) without making any major modifications of this program unless modifications have been identified and have received prior NRC approval.

Major modifications are defined as: (a) Elimination of any test identified in Chapter 13 of the Final Safety Analysis Report, as amended, as essential;(b) Modification of test objectives, methods or acceptance criteria for any test identified in Chapter 13 of the Final Safety Analysis Report, as amended, as essential;(c) Performance of any test at a power level different by more than five percent of rated power from there described; and Amendment No 264 INDEX LIMITING CONDITIONS FOR OPERATION AND SURVEILLANCE REQUIREMENTS SECTION PAGE 3/4.5 EMERGENCY CORE COOLING SYSTEMS (ECCS)3/4.5.1 3/4.5.2 3/4.5.3 3/4.5.4 3/4.5.5 3/4 .6 ACCUMULATORS

................

.........................

3/4 5-1 ECCS SUBSYSTEMS

-Tavg 350FF .........................

3/4 5-3 ECCS SUBSYSTEMS

-Tavg < 350 .F .........................

3/4 5-7 SEAL INJECTION FLOW ..................................

3/4 5-8a REFUELING WATER STORAGE TANK, .........................

3/4 5-9 CONTAINMENT SYSTEMS 3/4.6. 1 PRIMARY CONTAINMENT Containment Integrity

..............

Containment Leakage ................

Containment Air Locks ..............

Internal Pressure ..................

Air Temperature

....................

Containment Structural Integrity

....Containment Ventilation System ......DEPRESSURIZATION AND COOLING SYSTEMS.... 3/4.... 3/4.... 3/4.... 3/4.... 3/4.... 3/4.... 3/4 6-1 6-2 6-4 6-6 6-7 6-8 6-9 3/4 .6.2 Containment Spray System ....Spray Additive System .......Containment Cooling System ....... 3/4..... 3/4..... 3/4 6-10 6-11 6-12 3/4.6.3 CONTAINMENT ISOLATION VALVES .........................

3/4 6-14 SALEM -UNIT 2 VI Amendment No.264 INDEX BASES SECTION PAGE 3/4.5 EMERGENCY CORE COOLING SYSTEMS (ECCS)3/4.5.1 ACCUMULATORS

............................................

B 3/4 5-1 3/4.5.2 and ECCS SUBSYSTEMS

.......................................

B 3/4 5-1 3/4.5.3 3/4.5.4 SEAL INJECTION FLOW ...................................

B 3/4 5-2 3/4.5.5 REFUELING WATER STORAGE TANK (RWST) ...................

B 3/4 5-3 3/4.6 CONTAINMENT SYSTEMS 3/4.6.1 PRIMARY CONTAINMENT

....................................

B 3/4 6-1 3/4.6.2 DEPRESSURIZATION AND COOLING SYSTEMS ..................

B 3/4 6-3 3/4.6.3 CONTAINMENT ISOLATION VALVES ..........................

B 3/4 6-4 SALEM -UNIT.2 XlII Amendment No .264 PAGES 3/4 6-16 THROUGH 3/4 6-22 ARE INTENTIONALLY BLANK.SALEM -UNIT 2 3/4 6-16 through 6-22 Amendment No. 264