Classification of Containment Properties of Sealed Radioactive Sources Contained in Certain Devices to Be Distributed for Use Under General License| ML13350A236 |
| Person / Time |
|---|
| Issue date: |
03/31/1974 |
|---|
| From: |
US Atomic Energy Commission (AEC) |
|---|
| To: |
|
|---|
| References |
|---|
| RG-6.004 |
| Download: ML13350A236 (1) |
|
|
|---|
Category:Regulatory Guide
MONTHYEARRegulatory Guide 1.911975-01-31031 January 1975
Evaluation of Explosions Postulated to Occur on Transportation Routes Near Nuclear Power Plant Sites.
Regulatory Guide 4.91974-12-31031 December 1974
Preparation of Environmental Reports for Commercial Uranium Enrichment Facilities
Regulatory Guide 3.241974-12-31031 December 1974
Guidance on the License Application, Siting, Design, and Plant Protection for an Independent Spent Fuel Storage Installation
Regulatory Guide 5.401974-12-31031 December 1974
Methods for the Accountability of Plutonium Dioxide Powder
ML1122304881974-12-16016 December 1974
Request for Plans for Submitting Application for a License Amendment Regarding NRC Objective to Convert Existing Licenses to Incorporate the Generalizee Provision to Reduce the Number of Licensing Actions
Regulatory Guide 3.231974-11-30030 November 1974
Stabilization of Uranium-Thorium Milling Waste Retention Systems
Regulatory Guide 4.71974-09-30030 September 1974
Draft General Site Suitability Criteria for Nuclear Power Stations
Regulatory Guide 6.21974-07-31031 July 1974
Integrity and Test Specification for Selected Brachytherapy Sources
Regulatory Guide 5.351974-06-30030 June 1974
Calorimetric Assay of Plutonium
Regulatory Guide 1.861974-06-30030 June 1974
Termination of Operating Licenses for Nuclear Reactors
Regulatory Guide 1.801974-06-30030 June 1974
Preoperational Testing of Instrument Air Systems
Regulatory Guide 1.851974-06-30030 June 1974
Code Case Acceptability ASME Section III Materials
ML0208804451974-06-17017 June 1974
License Amendment 4, Changes in Byproduct Materials
Regulatory Guide 6.41974-03-31031 March 1974
Classification of Containment Properties of Sealed Radioactive Sources Contained in Certain Devices to Be Distributed for Use Under General License
Regulatory Guide 1.421974-03-31031 March 1974
Interim Licensing Policy as Low as Practicable for Gaseous Radioiodine Releases from Light-Water-cooled Nuclear Power Reactors.
Regulatory Guide 1.741974-02-28028 February 1974
Quality Assurance Terms and Definitions
Regulatory Guide 6.11974-02-28028 February 1974
Leak Testing Radioactive Brachytherapy Sources
Regulatory Guide 5.191974-01-31031 January 1974
Methods for the Accountability of Plutonium Nitrate Solutions
Regulatory Guide 1.661973-10-31031 October 1973
Nondestructive Examination of Tubular Products
Regulatory Guide 1.631973-10-31031 October 1973
Electric Penetration Assemblies in Containment Structures for Water-Cooled Nuclear Power Plants
Regulatory Guide 1.671973-10-31031 October 1973
Installation of Overpressure Protection Devices
Regulatory Guide 1.161973-10-31031 October 1973
Reporting of Operating Information
Regulatory Guide 4.31973-09-30030 September 1973
Measurements of Radionuclides in the Environment Analysis of I-131 in Milk
Regulatory Guide 8.91973-09-30030 September 1973
Acceptable, Concepts, Models, Equations, and Assumptions for a Bioassay Program
Regulatory Guide 1.591973-08-31031 August 1973
Design Basis Floods for Nuclear Power Plants
Regulatory Guide 3.111973-06-30030 June 1973
Design Stability of Embankment Retention Systems for Uranium Mills
Regulatory Guide 3.91973-06-30030 June 1973
Concrete Radiation Shields
Regulatory Guide 1.511973-05-31031 May 1973
Inservice Inspection of ASME Code Class 2 and 3 Nuclear Power Plant Components
Regulatory Guide 1.461973-05-31031 May 1973
Protection Against Pipe Whip Inside Containment.
Regulatory Guide 5.61973-05-31031 May 1973
Standard Methods for Chemical, Mass Spectrometric, and Spectrochemcial Analysis of Nuclear-Grade Plutomium Dioxide Powders and Pellets and Nuclear-Grade Mixed Oxides ((U,Pu)O2)
Regulatory Guide 1.491973-05-31031 May 1973
Power Levels of Water-Cooled Nuclear Power Plants
Regulatory Guide 3.81973-04-30030 April 1973
Preparation of Environmental Reports for Uranium Mills
Regulatory Guide 1.401973-03-16016 March 1973
Qualification Tests of Continuous-Duty Motors Installed Inside the Containment of Water-Cooled Nuclear Power Plants
Regulatory Guide 8.51973-02-16016 February 1973
Immediate Evacuation Signal
Regulatory Guide 4.11973-01-18018 January 1973
Measuring and Reporting of Radioactivity in the Environs of Nuclear Power Plants
Regulatory Guide 1.101973-01-0202 January 1973
Mechanical (Cadweld) Splices in Reinforcing Bars of Category I Concrete Structures
Regulatory Guide 1.151972-12-28028 December 1972
Testing of Reinforcing Bars for Category I Concrete Structures
Regulatory Guide 5.21972-12-20020 December 1972
Classification of Unirradiated Plutonium and Uranium Scrap
Regulatory Guide 1.701972-02-28028 February 1972
Standard Format and Content of Safety Analysis Reports for Nuclear Power Plants
ML12298A1181972-02-17017 February 1972
Safety Guide 11, Supplement: Instrument Lines Penetrating Primary Reactor Containment Backfitting Considerations
ML13038A4201971-12-29029 December 1971
Safety Guide 19, Nondestructive Examination of Primary Containment Liners
ML12216A0181970-12-0101 December 1970
Safety Guide 2, Thermal Shock to Reactor Pressure Vessels
1975-01-31
[Table view]Some use of "" in your query was not closed by a matching "". |
March 1974 U.S. ATOMIC ENERGY COMMISSION
SREGULATORY
GUlC I01 DIRECTORATE
OF REGULATORY
STANDARDS REGULATORY
GUIDE 6.4 CLASSIFICATION
OF CONTAINMENT
PROPERTIES
OF SEALED RADIOACTIVE
SOURCES CONTAINED
IN CERTAIN DEVICES TO BE DISTRIBUTED
FOR USE UNDER GENERAL LICENSE E
A. INTRODUCTION
Section 32.51, "Certain Measuring, Gauging or Controlling Devices Gencrally Licensed Under §31.5 of this Chapter: Requirements for License to Distribute," of 10 CFR Part 32, "Specific Licenses to Manufacture, Distribute, or Import Exempted and Generally Licensed Items Containing Byproduct Material," requires, in part, that each application for a specific license to distribute devices containing byproduct material to persons generally licensed under §31.5 of IOCFR Part 31 include sufficient information relating to qualification testing of a prototype unit to provide reasonable assurance that the byproduct material contained in the device will not be lost. Frequently, retention of the byproduct material within the device is dependent upon the containment properties of a. sealed source. This regulatory guide identifies terminology acceptable to the Regulatory staff for describing the containment properties of a sealed source based on prototype testing.
B. DISCUSSION
The USA Standards Institute Committee N5.4, now the American National Standards Institute Committee N43-3.3, developed a classification system for sealed sources (USASI N5.10. 1968).' To classify a sealed source under the system, a determination is made of its ability to withstand the conditions of each environmental test prescribed in the standard.Classification is determined by physically testing two prototype sources for each test or by calculations based on previous tests which demonstrate that, if the source were tested, it would pass. Maintenance of containment integrity after each test constitutes satisfactory performance of a source.C. REGULATORY
POSITION The sealed source classification system contained in USASI N5.10.1968'
provides acceptable terminology for use in describing the containment properties of a sealed source used in a device intended for distribution for use under the general license in §31.5 of I0 CFR Part 31. When the classification system is so used, the applicant should state whether calculational techniques or physical testing techniques were applied. If the latter were applied, the integrity (leak) test(s) used to determine conformity with the assigned classification should be identified and described.
Copies may be obtained from the American National Si-ndards Institute, Inc., 1430 Broadway.
New York, New York 1001
8. USAEC REGULATORY
GUIDES Copies of published guid"t may be obtained by request indicating the divisions desired to the US. Atomic Energy Commission.
Washington.
DC. 20546, Regulatory Guiclies ere Islued to teIVTbae and make available to the public Attention:
Director of Regulatory Stendards.
Comments end suggestions for rmethods acocptable to the AEC Regulatory staff of Implemenling specilic pi4t1 Of Improvements In these gutdes awe encouraged and should be sent to the Secretary the Commrislon's reIsetions.
to delineate techniques used by the Itaff IM of the Commission, U.S. Atomic Energiy Commsttion, Washington.
D.C. 70545, evaluting specdiic robtolornt or postulated aciciadn.t of to provide guidence 1o Attention:
Chief, Public Proosedinp Staff.appliants.
Regutltory Guides a not tubltiltutes Cx regulations and compliance with them Is not required.
Methods and eolutlons different from those wt out in The guide$ are issued in Ithe following len broad divisions:
the gulde will be accepteble if they provide a tails for the findings requisite to the isuance or continuance of a permit of license by the Comrmslstion.
1. Power Reactors d. Products 2. Reaseardh and Test Reactors
7. Transportation
3. Fuels and Materietl Facilities a. Occuolalonal Health PublIshedI
gudes will be revised periodically, at appropriate, to eccommodate
4. Environmmentl an-d SilIng 9. Antitrust Review comments end to reflect new Intorn"tlon or espeflence.
6. Meteslels and Plant Protectltor
10.