Regulatory Guide 3.68
| ML12220A068 | |
| Person / Time | |
|---|---|
| Issue date: | 04/30/1994 |
| From: | Office of Nuclear Regulatory Research |
| To: | |
| References | |
| DG-3008 RG-3.068 | |
| Download: ML12220A068 (4) | |
U.S. NUCLEAR REGULATC REGULA OFFICE OF NUCLEAR REC REGULATORY (Draft was issued NUCLEAR CRITICAUTr
A. INTRODUCTION
In 10 CFR Part 70, "Domestic Licensing of Spe-cial Nuclear Material," "Requirements for the Ap-proval of Applications" states that applications for a specific license to own, acquire, deliver, receive, pos-sess, use, or transfer special nuclear material will be approved if the Commission determines that the appli-cant is qualified by reason of training and experience to use the material for the purpose requested.
This regulatory guide provides guidance on an appropriate nuclear criticality safety training program for the use of special nuclear material, especially the prevention of criticality accidents, for license applicants and all members of their staffs associated with operations.
It is not adequate for training for the nuclear criticality staff.The information collections contained in this regu-latory guide are covered by the requirements in 10 CFR Part 70, which were approved by the Office of Management and Budget, approval number 3150-0009.
B. DISCUSSION
ANSI/ANS-8.20-1991, "Nuclear Criticality Safe-ty Training,"*
was prepared by Subcommittee
8, "Fis-sionable Materials Outside Reactors," of the Standards Committee of the American Nuclear Society; it pro-*Copies may be purchased from the American Nuclear Society, 555 North Kensington Avenue, La Grange Park, IL 60525.)RY COMMISSION
April 1994 TORY GUIDE ULATORY RESEARCH GUIDE 3.68 as DG-3008)(SAFETY TRAINING 6 vides a framework and criteria for training employees associated with fissionable material operations outside reactors when a potential exists for criticality acci-dents. ANSI/ANS-8.20-1991 was approved by the American National Standards Institute (ANSI) on May 20, 1991.The ANSI/ANS standard presents a training out-line, procedures, and responsibilities for providing nu-clear criticality safety training for employees associated with fissile material operations outside reactors that is generally acceptable to the NRC staff. The standard includes provisions for the establishment of training objectives, the designation of personnel requiring training, a skeletal framework of training program con-tent, and criteria for documentation and evaluation.
C. REGULATORY
POSITION 1. The general outline and content for a nuclear criticality safety training program described in ANSI/ANS-8.20-1991 is generally acceptable to the NRC staff for meeting the requirements in 10 CFR Part 70 for a nuclear criticality safety training program for per-sonnel associated with operations outside of reactors.2. The nuclear criticality safety training program should be developed with the cooperative involvement of management, supervision, and the criticality safety staff.3. The nuclear criticality safety training program should include specific learning objectives, program structure, program content, and program evaluation, USNRC REGULATORY
GUIDES Regulatory Guides are Issued to describe and make available to the public methods acceptable to the NRC staff of Implementing specific parts of the Commission's regulations, to delineate techniques used by the staff in evaluating specific problems or postulated accidents, or to provide guidance to applicants.
Regulatory Guides are not substitutes for regula-tions, and compliance with them Is not required.
Methods and solutions different from those set out In the guides will be acceptable if they provide a basis for the findings requisite to the Issuance or continuance of a per-mit or license by the Commission.
This guide was Issued after consideration of comments received from the public. Comments and suggestions for Improvements In these guides are encouraged at all times, and guides will be revised, as appropriate, to accommodate comments and to reflect new information or experience.
Written comments may be submitted to the Rules Review and Directives Branch, DFIPS, ADM, U. S. Nuclear Regulatory Commission, Washing-ton, DC 20555-0001.
The guides are issued in the following ten broad divisions:
1. Power Reactors 2. Research and Test Reactors 3. Fuels and Materials Facilities
4. Environmental and Siting 5. Materials and Plant Protection
6. Products
7. Transportation
8. Occupational Health 9. Antitrust and Financial Review 10. General Copies of issued guides may be purchased from the Government Printing Office at the current GPO price. Information on current GPO prices may be obtained by contacting the Superintendent of Documents, U.S.Government Printing Office, Mail Stop SSOP, Washington, DC 20402-9328.
telephone
(202)512-2249 or (202)512-2171.
Issued guides may also be purchased from the National Technical Infor-mation Service on a standing order basis. Details on this service may be obtained by writing NTIS, 5285 Port Royal Road, Springfield, VA 22161.
established through a systematic approach to training that includes: 3.1 Analysis of jobs and tasks to determine what a worker must know to be able to perform effec-tively;3.2 Design and development of learning ob-jectives based on the analysis of jobs and tasks that reflect the knowledge, skills, and abilities needed by the worker;3.3 Development of instructional materials based on the learning objectives;
3.4 Implementation of the training program to achieve the performance objectives identified in the analysis and design phase of the facility, and 3.5 Evaluation and, as appropriate, revision of the training program based on internal and external audits and results obtained from written, oral, and op-erational examinations.
4. The nuclear criticality safety training program should include instruction concerning implementation of revised or temporary operating procedures.
5. NUREG-1220, "Training Review Criteria and Procedures" (Revision
1, January 1993)** contains methods acceptable to the NRC staff for evaluating the development and implementation of a training pro-gram and is a useful tool for quality control of the pro-gram.
D. IMPLEMENTATION
The purpose of this section is to provide informa-tion to applicants and licensees regarding the NRC staff's plan for using this regulatory guide.Except in those cases in which an applicant pro-poses an acceptable alternative method for complying with specified portions of the Commission's regula-tions, the methods described in this guide will be used in the evaluation of applications for new licenses, li-cense renewals, and license amendments submitted under 10 CFR Part 70.*Copies may be purchased at current rates from the U.S. Gov-ernment Printing Office, Mail Stop SSOP, Washington, DC 20402-9328 (telephone
(202) 512-2249 or (202) 512-2171);
or from the National Technical Information Service by writing NTIS at 5285 Port Royal Road, Springfield, VA 22161.3.68-2 VALUE/IMPACT
STATEMENT A draft value/impact statement was published with the draft of this guide when it was published for public comment (Task DG-3008, January 1993). No changes were necessary, so a separate value/impact statement for the final guide has not been prepared.
A copy of the draft value/impact statement is available for inspection or copying for a fee in the Commission's Public Document Room at 2120 L Street NW, Washington, DC, under Task DG-3008.3.68-3
0 UNITED STATES NUCLEAR REGULATORY
COMMISSION
WASHINGTON, D.C. 20555-0001 FIRST CLASS MAIL POSTAGE AND FEES PAID USNRC PERMIT NO. G-67 OFFICIAL BUSINESS PENALTY FOR PRIVATE USE, $300