ML020330009: Difference between revisions

From kanterella
Jump to navigation Jump to search
VisualWikitext
StriderTol Bot insert
 
StriderTol Bot change
 
Line 18: Line 18:


=Text=
=Text=
{{#Wiki_filter:DPR-66 Table Index (cont.)
{{#Wiki_filter:DPR-66 Table Index (cont.)
TABLE                           TITLE                            PAGE 3.3-11         Accident Monitoring  Instrumentation            3/4 3-51 4.3-7         Accident Monitoring Instrumentation              3/4 3-52 Surveillance Requirements 3.3-13         Explosive Gas Monitoring Instrumentation        3/4 3-55 4.3-13        Explosive Gas Monitoring Instrumentation         3/4 3-57 Surveillance Requirements 4.4-1          Minimum Number of Steam Generators to be         3/4 4-10g Inspected During Inservice Inspection 4.4-2          Steam Generator Tube Inspection                 3/4 4-10h 4.4-3          Reactor Coolant System Pressure Isolation       3/4 4-14b Valves 4.4-12        Primary Coolant Specific Activity Sample         3/4 4-20 and Analysis Program 3.7-1          OPERABLE Main Steam Safety Valves   versus       3/4 7-2 Maximum Allowable Power j .7-2        Steam Line Safety Valves Per Loop               3/4 7-4 4.7-2          Secondary Coolant System Specific Activity       3/4 7-9 Sample and Analysis Program 3.8-1          Battery Surveillance Requirements               3/4 8-9a 3 .9-1        Beaver Valley Fuel Assembly Minimum Burnup       3/4 9-15 vs. Initial U235 Enrichment For Storage in Region 2 Spent Fuel Racks BEAVER VALLEY - UNIT 1             XVI I            Amendment No. 248
TABLE 3.3-11 4.3-7 3.3-13 4.3-13 4.4-1 4.4-2 4.4-3 4.4-12 3.7-1 j.7-2 4.7-2 3.8-1 3.9-1 Accident Monitoring Instrumentation Accident Monitoring Instrumentation Surveillance Requirements Explosive Gas Monitoring Instrumentation Explosive Gas Monitoring Instrumentation Surveillance Requirements Minimum Number of Steam Generators to be Inspected During Inservice Inspection Steam Generator Tube Inspection Reactor Coolant System Pressure Isolation Valves Primary Coolant Specific Activity Sample and Analysis Program OPERABLE Main Steam Safety Valves versus Maximum Allowable Power Steam Line Safety Valves Per Loop Secondary Coolant System Specific Activity Sample and Analysis Program Battery Surveillance Requirements Beaver Valley Fuel Assembly Minimum Burnup vs.
Initial U235 Enrichment For Storage in Region 2 Spent Fuel Racks BEAVER VALLEY -
UNIT 1 TITLE PAGE 3/4 3-51 3/4 3-52 3/4 3-55 3/4 3-57 3/4 4-10g 3/4 4-10h 3/4 4-14b 3/4 4-20 3/4 7-2 3/4 7-4 3/4 7-9 3/4 8-9a 3/4 9-15 Amendment No. 248 XVI I


DPR-66 3/4.7     PLANT SYSTEMS 3/4.7.1     TURBINE CYCLE MAIN STEAM SAFETY VALVES       (MSSVs)
DPR-66 3/4.7 PLANT SYSTEMS 3/4.7.1 TURBINE CYCLE MAIN STEAM SAFETY VALVES (MSSVs)
LIMITING CONDITION FOR OPERATION 3.7.1.1     Five MSSVs per steam generator       shall be OPERABLE.
LIMITING CONDITION FOR OPERATION 3.7.1.1 Five MSSVs per steam generator shall be OPERABLE.
APPLICABILITY:         MODES 1, 2 and 3.
APPLICABILITY:
ACTION:
MODES 1, 2 and 3.
-------------------- GENERAL NOTE Separate ACTION entry is       allowed for each MSSV.
ACTION:  
: a.       With one or more steam generators with one MSSV inoperable and the Moderator Temperature Coefficient           (MTC) zero or negative at all   power levels, within 4 hours reduce THERMAL POWER to less than or equal to 61% RTP; otherwise, be in HOT STANDBY within the next 6 hours, and in           HOT SHUTDOWN within the next 6 hours.
-------------------- GENERAL NOTE Separate ACTION entry is allowed for each MSSV.
: b.       With one or more steam generators with two or more MSSVs inoperable, or with one or more steam generators with one
: a.
_.MSSV inoperable and the MTC positive at         any power level, within 4 hours reduce THERMAL POWER to less         than or equal to the Maximum Allowable % RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs,       and reduce the Power Range Neutron Flux-High reactor trip       setpoint to less than or equal to the Maximum Allowable % RTP specified in             Table 3.7-1 for the number of OPERABLE MSSVs within the next 32 hours'-'; otherwise,   be in   HOT STANDBY within the next 6 hours, and in HOT SHUTDOWN within the next 6 hours.
With one or more steam generators with one MSSV inoperable and the Moderator Temperature Coefficient (MTC) zero or negative at all power levels, within 4 hours reduce THERMAL POWER to less than or equal to 61% RTP; otherwise, be in HOT STANDBY within the next 6 hours, and in HOT SHUTDOWN within the next 6 hours.
: c.       With one or more steam generators       with four or more MSSVs inoperable, within 6 hours be in         HOT STANDBY and in       HOT SHUTDOWN within the next 6 hours.
: b.
: d.       The provisions of Specification 3.0.4       are not applicable.
With one or more steam generators with two or more MSSVs inoperable, or with one or more steam generators with one
SURVEILLANCE REQUIREMENTS 4.7.1.1     Verify12 each required MSSV lift       setpoint per Table 3.7-2     in accordance with the Inservice Testing Program.               Following testing, lift settings     shall be within + 1 percent.
_.MSSV inoperable and the MTC positive at any power level, within 4 hours reduce THERMAL POWER to less than or equal to the Maximum Allowable % RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs, and reduce the Power Range Neutron Flux-High reactor trip setpoint to less than or equal to the Maximum Allowable  
(1) Required to be performed only in         MODE 1.
% RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs within the next 32 hours'-';
(2) Required to be performed only in         MODES 1 and 2.
otherwise, be in HOT STANDBY within the next 6
BEAVER VALLEY - UNIT 1                 3/4 7-1             Amendment No. 248
hours, and in HOT SHUTDOWN within the next 6 hours.
: c.
With one or more steam generators with four or more MSSVs inoperable, within 6 hours be in HOT STANDBY and in HOT SHUTDOWN within the next 6 hours.
: d.
The provisions of Specification 3.0.4 are not applicable.
SURVEILLANCE REQUIREMENTS 4.7.1.1 Verify12 each required MSSV lift setpoint per Table 3.7-2 in accordance with the Inservice Testing Program.
Following
: testing, lift settings shall be within + 1 percent.
(1) Required to be performed only in MODE 1.
(2)
Required to be performed only in MODES 1 and 2.
BEAVER VALLEY -
UNIT 1 3/4 7-1 Amendment No.
248


DPR- 66 TABLE 3.7-1 OPERABLE Main Steam Safety Valves versus Maximum Allowable Power NUMBER OF OPERABLE MSSVs               MAXIMUM ALLOWABLE POWER PER STEAM GENERATOR                         (% RTP) 4                                 < 58 3                                 < 41 2                                 < 24 BEAVER VALLEY   - UNIT 1           3/4 7-2           Amendment No. 248 (next page is 3/4 7-4)
DPR-66 TABLE 3.7-1 OPERABLE Main Steam Safety Valves versus Maximum Allowable Power NUMBER OF OPERABLE MSSVs MAXIMUM ALLOWABLE POWER PER STEAM GENERATOR
(% RTP) 4  
< 58 3  
< 41 2  
< 24 BEAVER VALLEY -
UNIT 1 3/4 7-2 (next page is 3/4 7-4)
Amendment No. 248


NPF-73 3/4.7     PLANT SYSTEMS 3/4.7.1     TURBINE CYCLE MAIN STEAM SAFETY VALVES       (MSSVs)
NPF-73 3/4.7 PLANT SYSTEMS 3/4.7.1 TURBINE CYCLE MAIN STEAM SAFETY VALVES (MSSVs)
LIMITING CONDITION FOR OPERATION 3.7.1.1     Five MSSVs per steam generator         shall be OPERABLE.
LIMITING CONDITION FOR OPERATION 3.7.1.1 Five MSSVs per steam generator shall be OPERABLE.
APPLICABILITY:         MODES 1, 2 and 3.
APPLICABILITY:
ACTION:
MODES 1, 2 and 3.
-------------------- GENERAL NOTE Separate ACTION entry is       allowed for each MSSV.
ACTION:  
: a.       With one or more steam generators with one MSSV inoperable and the Moderator Temperature Coefficient             (MTC) zero or negative at all   power levels,     within 4 hours reduce THERMAL POWER to less than or equal         to 61% RTP; otherwise, be in HOT STANDBY within the next       6 hours,   and in HOT SHUTDOWN within the next 6 hours.
-------------------- GENERAL NOTE Separate ACTION entry is allowed for each MSSV.
: b.       With one or more steam generators with two or more MSSVs inoperable, or with one or more steam generators with one
: a.
            .MSSV   inoperable and the MTC positive         at any power level, within 4 hours reduce THERMAL POWER to less than or equal to the Maximum Allowable % RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs,         and reduce the Power Range Neutron Flux-High reactor trip         setpoint to less than or equal to the Maximum Allowable % RTP specified in               Table 3.7-1 for the number of OPERABLE MSSVs within the next 32 hours' -; otherwise, be in     HOT STANDBY within the next 6 hours, and in HOT SHUTDOWN within the next 6 hours.
With one or more steam generators with one MSSV inoperable and the Moderator Temperature Coefficient (MTC) zero or negative at all power levels, within 4 hours reduce THERMAL POWER to less than or equal to 61% RTP; otherwise, be in HOT STANDBY within the next 6 hours, and in HOT SHUTDOWN within the next 6 hours.
: c.       With one or more steam generators         with four or more MSSVs inoperable, within 6 hours be in           HOT STANDBY and in HOT SHUTDOWN within the next 6 hours.
: b.
: d.       The provisions   of Specification 3.0.4 are not applicable.
With one or more steam generators with two or more MSSVs inoperable, or with one or more steam generators with one  
SURVEILLANCE REQUIREMENTS 4.7.1.1     Verify1 2 each required MSSV lift       setpoint per Table 3.7-2     in accordance with the Inservice Testing Program.                 Following testing, lift settings     shall be within + 1 percent.
.MSSV inoperable and the MTC positive at any power level, within 4 hours reduce THERMAL POWER to less than or equal to the Maximum Allowable % RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs, and reduce the Power Range Neutron Flux-High reactor trip setpoint to less than or equal to the Maximum Allowable  
(1) Required to be performed only in           MODE 1.
% RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs within the next 32 hours' -;
(2) Required to be performed only in           MODES 1 and 2.
otherwise, be in HOT STANDBY within the next 6
BEAVER VALLEY - UNIT 2                 3/4 7-1               Amendment No. 127
hours, and in HOT SHUTDOWN within the next 6 hours.
: c.
With one or more steam generators with four or more MSSVs inoperable, within 6 hours be in HOT STANDBY and in HOT SHUTDOWN within the next 6 hours.
: d.
The provisions of Specification 3.0.4 are not applicable.
SURVEILLANCE REQUIREMENTS 4.7.1.1 Verify1 2 each required MSSV lift setpoint per Table 3.7-2 in accordance with the Inservice Testing Program.
Following testing, lift settings shall be within + 1 percent.
(1) Required to be performed only in MODE 1.
(2)
Required to be performed only in MODES 1 and 2.
BEAVER VALLEY -
UNIT 2 Amendment No.
127 3/4 7-1


NPF-73 TABLE 3.7-1 OPERABLE Main Steam Safety Valves versus Maximum Allowable Power NUMBER OF OPERABLE MSSVs             MAXIMUM ALLOWABLE POWER PER STEAM GENERATOR                       (% RTP) 4                                 < 58 3                                 < 41 2                                 < 24 BEAVER VALLEY - UNIT 2           3/4 7-2           Amendment No. 127}}
NPF-73 TABLE 3.7-1 OPERABLE Main Steam Safety Valves versus Maximum Allowable Power NUMBER OF OPERABLE MSSVs MAXIMUM ALLOWABLE POWER PER STEAM GENERATOR
(% RTP) 4  
< 58 3  
< 41 2  
< 24 BEAVER VALLEY -
UNIT 2 Amendment No. 127 3/4 7-2}}

Latest revision as of 01:14, 17 January 2025

Amendments 248 & 127 Re Technical Specification Pages
ML020330009
Person / Time
Site: Beaver Valley
Issue date: 01/29/2002
From:
NRC/NRR/DLPM
To:
References
TAC MB2555, TAC MB2556
Download: ML020330009 (5)
v • d • e


Text

DPR-66 Table Index (cont.)

TABLE 3.3-11 4.3-7 3.3-13 4.3-13 4.4-1 4.4-2 4.4-3 4.4-12 3.7-1 j.7-2 4.7-2 3.8-1 3.9-1 Accident Monitoring Instrumentation Accident Monitoring Instrumentation Surveillance Requirements Explosive Gas Monitoring Instrumentation Explosive Gas Monitoring Instrumentation Surveillance Requirements Minimum Number of Steam Generators to be Inspected During Inservice Inspection Steam Generator Tube Inspection Reactor Coolant System Pressure Isolation Valves Primary Coolant Specific Activity Sample and Analysis Program OPERABLE Main Steam Safety Valves versus Maximum Allowable Power Steam Line Safety Valves Per Loop Secondary Coolant System Specific Activity Sample and Analysis Program Battery Surveillance Requirements Beaver Valley Fuel Assembly Minimum Burnup vs.

Initial U235 Enrichment For Storage in Region 2 Spent Fuel Racks BEAVER VALLEY -

UNIT 1 TITLE PAGE 3/4 3-51 3/4 3-52 3/4 3-55 3/4 3-57 3/4 4-10g 3/4 4-10h 3/4 4-14b 3/4 4-20 3/4 7-2 3/4 7-4 3/4 7-9 3/4 8-9a 3/4 9-15 Amendment No. 248 XVI I

DPR-66 3/4.7 PLANT SYSTEMS 3/4.7.1 TURBINE CYCLE MAIN STEAM SAFETY VALVES (MSSVs)

LIMITING CONDITION FOR OPERATION 3.7.1.1 Five MSSVs per steam generator shall be OPERABLE.

APPLICABILITY:

MODES 1, 2 and 3.

ACTION:

GENERAL NOTE Separate ACTION entry is allowed for each MSSV.

a.

With one or more steam generators with one MSSV inoperable and the Moderator Temperature Coefficient (MTC) zero or negative at all power levels, within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> reduce THERMAL POWER to less than or equal to 61% RTP; otherwise, be in HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and in HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

b.

With one or more steam generators with two or more MSSVs inoperable, or with one or more steam generators with one

_.MSSV inoperable and the MTC positive at any power level, within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> reduce THERMAL POWER to less than or equal to the Maximum Allowable % RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs, and reduce the Power Range Neutron Flux-High reactor trip setpoint to less than or equal to the Maximum Allowable

% RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs within the next 32 hours3.703704e-4 days <br />0.00889 hours <br />5.291005e-5 weeks <br />1.2176e-5 months <br />'-';

otherwise, be in HOT STANDBY within the next 6

hours, and in HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

c.

With one or more steam generators with four or more MSSVs inoperable, within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> be in HOT STANDBY and in HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

d.

The provisions of Specification 3.0.4 are not applicable.

SURVEILLANCE REQUIREMENTS 4.7.1.1 Verify12 each required MSSV lift setpoint per Table 3.7-2 in accordance with the Inservice Testing Program.

Following

testing, lift settings shall be within + 1 percent.

(1) Required to be performed only in MODE 1.

(2)

Required to be performed only in MODES 1 and 2.

BEAVER VALLEY -

UNIT 1 3/4 7-1 Amendment No.

248

DPR-66 TABLE 3.7-1 OPERABLE Main Steam Safety Valves versus Maximum Allowable Power NUMBER OF OPERABLE MSSVs MAXIMUM ALLOWABLE POWER PER STEAM GENERATOR

(% RTP) 4

< 58 3

< 41 2

< 24 BEAVER VALLEY -

UNIT 1 3/4 7-2 (next page is 3/4 7-4)

Amendment No. 248

NPF-73 3/4.7 PLANT SYSTEMS 3/4.7.1 TURBINE CYCLE MAIN STEAM SAFETY VALVES (MSSVs)

LIMITING CONDITION FOR OPERATION 3.7.1.1 Five MSSVs per steam generator shall be OPERABLE.

APPLICABILITY:

MODES 1, 2 and 3.

ACTION:

GENERAL NOTE Separate ACTION entry is allowed for each MSSV.

a.

With one or more steam generators with one MSSV inoperable and the Moderator Temperature Coefficient (MTC) zero or negative at all power levels, within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> reduce THERMAL POWER to less than or equal to 61% RTP; otherwise, be in HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and in HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

b.

With one or more steam generators with two or more MSSVs inoperable, or with one or more steam generators with one

.MSSV inoperable and the MTC positive at any power level, within 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> reduce THERMAL POWER to less than or equal to the Maximum Allowable % RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs, and reduce the Power Range Neutron Flux-High reactor trip setpoint to less than or equal to the Maximum Allowable

% RTP specified in Table 3.7-1 for the number of OPERABLE MSSVs within the next 32 hours3.703704e-4 days <br />0.00889 hours <br />5.291005e-5 weeks <br />1.2176e-5 months <br />' -;

otherwise, be in HOT STANDBY within the next 6

hours, and in HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

c.

With one or more steam generators with four or more MSSVs inoperable, within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> be in HOT STANDBY and in HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

d.

The provisions of Specification 3.0.4 are not applicable.

SURVEILLANCE REQUIREMENTS 4.7.1.1 Verify1 2 each required MSSV lift setpoint per Table 3.7-2 in accordance with the Inservice Testing Program.

Following testing, lift settings shall be within + 1 percent.

(1) Required to be performed only in MODE 1.

(2)

Required to be performed only in MODES 1 and 2.

BEAVER VALLEY -

UNIT 2 Amendment No.

127 3/4 7-1

NPF-73 TABLE 3.7-1 OPERABLE Main Steam Safety Valves versus Maximum Allowable Power NUMBER OF OPERABLE MSSVs MAXIMUM ALLOWABLE POWER PER STEAM GENERATOR

(% RTP) 4

< 58 3

< 41 2

< 24 BEAVER VALLEY -

UNIT 2 Amendment No. 127 3/4 7-2

Retrieved from "https://kanterella.com/w/index.php?title=ML020330009&oldid=5444356"