ML18089A376

Forwards Addl Info Re Compliance W/Reg Guide 1.97 in Response to .Most Reg Guide 1.97 Variables Will Be Displayed on Safety Parameter Display Sys & in Technical Support Ctr & Emergency Operations Facility

ML18089A376
Person / Time
Site:	Salem
Issue date:	09/21/1983
From:	Liden E Public Service Enterprise Group
To:	Varga S Office of Nuclear Reactor Regulation
References
RTR-REGGD-01.097, RTR-REGGD-1.097 NUDOCS 8309270554
Download: ML18089A376 (62)

Text

PS~G*

Public Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038 Nuclear Department September 21, 1983 Director of Nuclear Reactor Regulation U.S. Nuclear Regulatory Commission 7920 Norfolk Avenue Bethesda, Maryland 20014 Attention:

Mr. Steven Varga, Chief Operations Reactors Branch 1 Division of Licensing Gentlemen:

COMPLIANCE WITH REGULATORY GUIDE 1.97 NRC REQUEST FOR ADDITIONAL INFORMATION NO. 1 AND 2 UNITS SALEM GENERATING STATION DOCKET NOS. 50-272 ANIT ~0-311 PSE&G hereby transmits ifs--reponses to the NRC request for additional information on compliance to Regulatory Guide 1.97.

These responses address each item of Enclosure 2 of your letter of July 26, 1983.

1.

PSE&G has 24-hour contact with the National Weather Service at Wilmington Airport in Delaware via telephone (302-323-2280) and a written agreement to obtain information on meteorological conditions.

2.

Justifications for variable reference numbers 13, 14, 41, 44, and 62 in Table II-1 of our submittal of April 2, 1981, are provided on Attachment 1.

The compliance level of variable reference number 53A has been changed from 5 to 1.

Compliance levels of variable reference numbers 59, 60B, and 73 are changed from 3a to 5, and justifications are also provided on Attachment 1.

The compliance level of variable reference number 40 has changed from 3a to 4a, as explained in the Remarks column of.

3.

See Attachment 2.

4.

See Attachment 2.

8309270554 830921 PDR ADOCK 05000272 F

PDR The Energy People 95-2168 (SOM) 11 -82

1 1

Director of Nuclear Reactor Regulation U.S. Nuclear Regulatory Commission

5.

See Attachment 2.

6.a No exceptions taken.

6.b No exceptions taken. 9/21/83 6.c There are no isolation devices for the following variable reference numbers: 4, 5, 24, 27, 35, 39, 40, 42, 45, 46, 47, and 49.

However, these variables will be on the Safety Parameter Display System and the class lE multiplexers will have qualified isolation devices.

6.d No exceptions taken.

6.e No exceptions taken.

6.f No exceptions taken.

6.g No exceptions taken.

It should be noted that most of Regulatory Guide 1.97 variables will be displayed on the Safety Parameter Display System (SPDS).

These variables will also be displayed in the TSC and EOF, as indicated in Attachment 2, when the SPDS is installed.

Should you have any questions, please contact us.

Very truly your~,

~

Liden Manager -

Nuclear Licensing and Regulation Attachments CC:

Mr. Donald C. Fischer Licensing Project Manager Mr. James Linville Senior Resident Inspector

ATTACHMENT 1 JUSTIFICATION FOR NON-CONFORMANCE TO REGULATORY GUIDE 1.97 Variable Reference No.

13 14 41 44 Dl0/3.1 1/02 Justification There is radiation monitoring on the letdown line; however, during an accident this line is isolated.

Our back-up or alternate means of measuring this variable is the Post Accident Sampling System.

The Post Accident Sampling System which is installed at Salem will obviate the need for this variable.

An alternate means of determining the containment spray flow is the spray additive tank flow rate, which is available (refer to Variable Code

1. 4la).

The spray additive tank flow rate is the flow of liquid which is educted to the suction of the containment spray pumps.

The eduction is accomplished by recirculating the containment spray liquid from the discharge to the suction of the containment spray pumps.

Because of the foregoing, it can be concluded that an indication of the spray additive flow is confirmation of containment spray pumps operation.

The containment sump temperature indication is not required based on regulatory position delineated in Safety Guide 1, "Net Positive Suction Head for Emergency Core Cooling and Containment Heat Removal System Pumps."

PSE&G's Emergency Core Cooling and Containment Heat Removal System pumps, specifically the Residual Heat Removal pumps which take suction from the contaimment sump when the refueling water storage tank is empty, were designed to meet the criteria in Safety Guide 1.

I I

Variable Reference No.

59 60B 62 73 MA:dh Dl0/3.1 2/02 ATTACHMENT 1 (CONT'D)

Justification The steam generator safety relief valves and the atmospheric dump valves are located on the main steam line, upstream of the main steam stop valve.

A radiation monitor was installed on the main steam line of each steam generator also upstream of the main steam stop valve.

This monitor will therefore give an indication of the level of radiation in the steam from the vents if the steam generator safety relief valves or the atmospheric dump valves should open.

The steam supply to the auxiliary feed pump is taken from the main steam line of #11 (21) and # 13 (23) steam generators, upstream of the main steam stop valves.

A radiation monitor was installed on the main steam line of each steam generator also upstream of the main steam stop valve.

Because of the foregoing, if the auxiliary feed pump is in operation, this monitor will give an indication of the level of radiation in the exhaust.

This variable was deleted in Revision 3 of Reg. Guide 1.97.

This variable does not meet the requirements of Regulatory Guide 1.97 in the area of environmental qualification for Units 1 & 2, and seismic qualification for Unit 1.

A monitor, however, which is located on the main steam line of each steam generator, upstream of the main steam valve, will provide adequate indication of the blowdown radiation level.

The main steam monitors meet the requirements of Regulatory Guide 1.97.

Dl0/3 1.2 SALEM GENERATING STATION UNIT NOS. 1 AND 2 RESPONSE TO ENCLOSURE 2 OF NRC LETTER DATED JULY 26, 1983 ATTACHMENT 2

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIQ!I QUALIFICATIOJ:>

QUALIFICATim ASSURANCE (VARIABLE REF. NO.)

TYPE A,B,C,D,E 1,2,3 1,2,3 SIEUTRON FLUX B

1 1

NO NO YES

( 1)

CONTROL ROD B

3

!POSITION 3

NOT REQUIRED NOT REQUIRED NOT REQUIREI

0)

!RCS SOLUBLE B

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIREI BORON CONCENTRATION

( 3)

IRCS COLD LEG WATER B

1,3 1

YES YES YES lrEMPERATURE

( 4)

IRCS HOT LEG A,B 1

1 YES YES YES WATER TEMPERATURE

( 5)

Dl0/3 1/57 olO/] l

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY SOURCE RANGE TWO CLASS lE INDICATOR~

YES YES YES YES CHANNELS, INTER-BATTERY ALL MEDIATE RANGE BACKED

CHANNELS, TWO CHANNELS RECORDERS-POWER RANGE FOUR FOUR CHANNELS, CHANNELS CATED ON REACTOR (NEUTRON SSEL FLUX)

( 1)

NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED YES REQUIRED BATTERY

( 2)

BACKED NO REDUNDANCY NON-CLASS lE INDICATOR YES YES NOT REQUIRED NO REQUIRED STATION

( 3)

POWER FOUR CHANNELS CLASS lE RECORDER -

YES YES YES NO (ONE ON EACH BATTERY FOR EACH COLD LEG BETWEEN BACKED CHANNEL CP AND REACTOR)

)

FOUR CHANNELS CLASS lE RECORDER -

YES YES YES NO (ONE ON EACH HOT LEG BATTERY FOR EACH BETWEEN REACTOR AND BACKED CHANNEL I

STM. GENERATOR)

( 5) 610;3 2/57

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES SOURCE RANGE 100-( l) 106 CPS, INTER-MEDIATE RANGE l0-11 lo-3 AMPS, POWER RANGE 0-120%

YES

( 2 )

NOT REQUIRED

( 3 )

YES

( 4)

YES

( 5) 0-150 IN 0-5000 PPM 0-700°F.

0-700°F MEASUREMENT DIRECT DIRECT DIRECT DIRECT DIRECT REMARKS THIS IS A GENERIC WESTINGHOUSE PROBLEM WHICf REQUIRES RESOLUTION BY WESTINGHOUSE.

A SCHEDULE FOR COMPLIANCE CANNOT BE GIVEN UNTIL THE GENERIC ITEM IS RESOLVED.

THE INSTRUMENTATION IS SEISMICALLY QUALIFIED EXCEPT FOR THE DETECTORS.

THE EXISTING RANGE OF 0-700°F COVERS CONDITIONS FOR ALL ACCIDENTS EXCEPT WHERE ITHE REACTOR COOLANT BECOMES SUPERHEATED.

FOR THIS CONDITION, INCORE THERMOCOUPLES MAY BE USED.

ttHE EXISTING RANGE OF 0-700°F COVERS CONDITIONS FOR ALL ACCIDENTS EXCEPT WHERE

~HE REACTOR COOLANT BECOMES SUPERHEATED.

FOR THIS CONDITION, INCORE THERMOCOUPLES MAY BE USED.

. VARIABLE

!APPLICABLE iAPPLICABLE CATEGORY USED ENVIRONMENT AI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOl'i QUALIFICATim QUALIFICATim ASSURANCE (VARIABLE REF. NO.) rr'YPE A,B,C,D,E 1,2,3 1,2,3 RCS PRESSURE A,B,C 1

1 YES YES YES

( 6)

CORE EXIT TEMP.

B,C 1,3 1

NO NO NO

( 7)

COOLANT LEVEL IN B

1 1

YES YES YES REACTOR

( 8)

DEGREES OF SUB-A,B 1,2 1

N/A N/A N/A COOLING

( 9 )

NTAINMENT SUMP B,C 1,2 1

YES YES YES WATER LEVEL

( 10)

Dl0/3 4/57 DlO/~ 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY lrwo CHANNELS (HOT LEG CLASS lE INDICATOR-YES YES YES YES BETWEEN REACTOR AND BATTERY ONE CHANNEI STM. GENERATOR)

BACKED RECORDER

( 6)

ONE CHANNEI 69 THERMOCOUPLES NON-CLASS lE ON DEMAND YES YES YES YES

)

STATION POWER PLANT COMPUTER II'WO CHANNELS CLASS lE INDICATORS YES YES YES YES (3/4 11 CONNECTION BATTERY BOTH ON REACTOR VESSEL)

BACKED CHANNELS

( 8)

RECORDER ONE CHANNEL tN/A N/A CRT OF YES YES N/A N/A

( 9)

P-250 COMPUTER*

WO CHANNELS (BOTH CLASS lE INDICATORS YES YES YES NOT NSORS ON CON-BATTERY BOTH REQUIREI ITAINMENT SUMP)

BACKED

CHANNELS

( 10)

RECORDERS

!BOTH CHANNELS Dl0/3 5/57 610/J 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES

( 6)

YES

( 7)

YES

( 8)

N/A

( 9)

YES

( 10)

Dl0/3 6/57 Dl0/3 1. 1 0-3000 PSI 0-2300°F -

PLANT COMPUTER LOOKS AT A RANGE OF 30°F-2200°F BOTTOM OF CORE TO TOP OF VESSEL N/A RECORDERS -

70'-90',

INDICATORS -

0-100%

MEASUREMENT DIRECT DIRECT DIRECT INDIRECT DIRECT REMARKS THIS IS A GENERIC WESTINGHOUSE PROBLEM WHICH REQUIRES RESOLUTION BY WESTINGHOUSE.

A SCHEDULE FOR COMPLIANCE CANNOT BE GIVEN UNTIL THE GENERIC ITEM IS RESOLVED.

THERMOCOUPLE CONNECTORS ARE QUALIFIED.

THE THERMOCOUPLES USED ARE CHROMEL ALUMEL TYPE "K".

THERE IS A PROGRAM IN THE P-250 PLANT COMPUTER WHICH COMPUTES THE VALUE OF THE VARIABLE WHICH CAN BE DISPLAYED ON THE CRT IN THE CONTROL ROOM.

VARIABLES #6 & #7 ARE INPUTS TO THE PROGRAM.

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENT AI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOl\\

QUALIFICATim QUALIFICATIO!

ASSURANCE (VARIABLE REF. NO.) II'YPE A,B,C,D,E 1,2,3 1, 2, 3

CONTAINMENT A,B,C 1

1 YES YES YES

!PRESSURE

( 11) iCONTAINMENT ISOLATICN B

1 1

YES YES YES LVE POSITION IMIT SWITCHES)

( 12)

RADIOACTIVITY CON-c 1

1 N/A N/A N/A CENTRATION OR RADIAT ION wEVEL IN CIRCULATING PRIMARY COOLANT

( 13) lz\\NALYSIS OF PRIMARY c

3

COOLANT 3

N/A N/A N/A

4) tONTAINMENT AREA C,D 1,3 1

YES YES YES

!RADIATION (15)

Dl0/3 7/57 DlO/~ 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY FOUR CHANNELS (DISC CLASS lE INDICATORS YES YES YES YES SENSORS, ONE BATTERY FOUR CHANNE L SENSOR AT EACH BACKED RECORDERS OF THE FOLLOWING TWO.OF THE PENERATIONS:

23, FOUR 24B, 25B, 27, 30, CHANNELS

& 55)

1)

SEE REMARKS CLASS lE INDICATING YES YES YES NOT REQUIREI COLUMN BATTERY LIGHTS ON

( 12)

BACKED STATUS PANEL N/A N/A

[\\!/A

( 13)

N/A N/A N/A N/A A

N/A N/A N/A N/A N/A N/A

4)

TWO CHANNELS (CON-CLASS lE

!RECORDERS YES YES YES YES TAINMENT AREA AT BATTERY BOTH ITWO DIFFERENT BACKED

CHANNELS ELEVATIONS)

(15)

Qfd-l-:(\\ 'd/ ':JI

SERVICING, TESTING, RANGE MEASUREMENT REMARKS AND CALIBRATION PROGRAM YES

-5 TO +55 PSI DIRECT TECH SPECS SPECIFIES SERVICING, TESTING,

-5 TO +180 PSI AND CALIBRATION.

s N/A DIRECT THE LIMIT SWITCHES WERE QUALIFIED WHERE THE LOCATION WARRANTED SUCH QUALIFICATION.

THE LOCATION VARIES AS FOLLOWS:

INSIDE CONTAINMENT, OUTSIDE CONTAINMENT, AND PENETRATION AREA.

N/A N/A N/A POST ACCIDENT SAMPLING SYSTEM WILL MONITOR THIS PARAMETER.

SEE VARIABLE REFERENCE NO. 69.

N/A N/A N/A SAME REMARKS AS ABOVE.

YES 1 -107 R/HR DIRECT POST ACCIDENT SAMPLING SYSTEM WILL MONITOR THIS PARAMETER.

SEE VARIABLE REFERENCE NO. 69.

Dl0/3 9/57 010/*3 i. i

VARIABLE 1\\PPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAi

. SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATI01' QUALIFICATI01' QUALIFICATIDr ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 EFFULENT A,C 1,3 1

NO NO YES RADIOACTIVITY NOBLE GAS EFFULENT FROM CONDENSER AIR REMOVAL SYSTEM EXHAUST.

( 16)

CONTAINMENT c

1 1

YES YES YES HYDROGEN CONCENTRATION (17)

ONTAINMENT c

2 2

NO YES YES EFFULENT RADIOACTIVITY NOBLE GASES WROM IDENTIFIED RELEASE POINTS

18)

Dl0/3 10/57

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY bNE CHANNEL NON-CLASS lE PROCESS YES YES NOT REQUIRED YES (12" DISCHARGE STATION COMPUTER

!LINE FROM POWER (UNIT CRT NOS. 22, 23,

1. 1 ONLY)

& 24 VACUUM PUMPS SEPARATING TANKS TO PLANT VENT)

6)

TWO CHANNELS CLASS lE INDICATORS YES YES YES NOT REQUIREI REACTOR BATTERY BOTH CHANNE LS (CONTAINMENT BACKED RECORDER EL 150' 0 II )

BOTH CHANNE LS (l 7)

NO REDUNDANCY CLASS lE INDICATORS YES YES NOT REQUIRED YES REQUIRED BATTERY R41 THREE

( 18)

BACKED CHANNELS R45 TWO CHANNELS RECORDER -

R45 TWO CHANNELS Dl0/3 11/57

SERVICING, TESTING, RANGE MEASUREMENT REMARKS AND CALIBRATION PROGRAM YES l.72x'10-8 DIRECT CONDENSER AIR REMOVAL SYSTEM EXHAUSTS

( 16)

MICRO-CURRIE/CC THROUGH THE PLANT VENT.

PLANT VENT TO MONITORS ARE QUALIFIED.

POWER SOURCE FOR

1. 72 x 10-2 UNIT #1 MONITOR IS CLASS lE BATTERY BACKED.

MICRO-CURRIE/CC YES 0-10% H2 DIRECT

( 1 7)

YES R41 DIRECT

( 18) lo-13 TO 102 MICRO-CURRIE/CC R45 lQ-4 TO lo+S MICRO-CURRIE/CC 10/3 12/57 Dl0/-3 1.1

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIGr>

QUALIFICATim QUALIFICATirn ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 RADIATION C,E 2

2 YES YES YES EXPOSURE RATE (INSIDE BLDG. OR t!iREAS, E.G. AUX.

BLDG., REACTOR SHIELD BLDG.,

l\\NNULUS, FUEL HANDLING BLDG.,

ICH ARE IN RECT CONTACT iV/PRIMARY CONTAINMENT WHERE 0 ENETRATIONS AND HATCHES ARE J

iwOCATED.)

(ELECTRICAL bENETRATION AREA)

19)

RADIATION EXPOSURE C,E 2

RATE (SAME AS 2

NO NO NO

~BOVE) (FUEL tIANDLING BLDG.,

D MECHANICAL NETRATION AREA.)

19A)

Dl0/3 13/57

.. 610;2 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY INO REDUNDANCY CLASS lE RMS YES YES NOT REQUIRED YES

!REQUIRED BATTERY COMPUTER (19)

BACKED CRT NO REDUNDANCY CLASS lE RMS YES YES NOT REQUIRED YES

!REQUIRED BATTERY COMPUTER

( 19A)

BACKED CRT Dl0/3 14/57 610/-3 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES 100 -

107 REM/HR (19)

YES l0 106M.REM/HR (19A)

Dl0/3 15/57 4 rho;-3 1.1 MEASUREMENT DIRECT DIRECT REMARKS THIS INSTRUMENTATION WILL BE INSTALLED AS INDICATED IN THE LETTER TO THE NRC DATED APRIL 20, 1983.

UNIT #2 ONLY.

MONITORS ARE INSTALLED IN THE FUEL HANDLING BLDG., MECHANICAL PENETRATION* AREA AND CHARGING PUMP ROOM.

THESE MONITORS DO NOT HAVE ENVIRONMENTAL QUALIFICATION TEST DATA.

THESE WERE NOT PART OF NUREG 0588 REVIEW SINCE THEY ARE NOT USED FOR MITIGATION OF ACCIDENTS WHICH RESULT IN A HARSH ENVIRONMENT.

ACCESS TO THESE AREAS IS NOT PERMITTED AFTER AN ACCIDENT.

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAi SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOt-QUALIFICATim QUALIFICATIO![

ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 RHR SYSTEM D

2 2

YES YES YES l<'LOW

( 2 0)

R HEAT D

2 2

NO NO NO CHANGER OUTLET irEMP.

( 21)

ACCUMULATOR D

2 2

YES YES YES TANK LEVEL &

PRESSURE

( 2 2)

CCUMULATOR D

2 2

YES YES YES OLATION VALVE OSITION

( 2 3)

Dl0/3 16/57 DlO/-a 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREI REQUIRED BATTERY

( 2 0)

BACKED REDUNDANCY N/A MONITORED YES YES NOT REQUIRED NOT REQUIREI

__ QUIRED BY PLANT

( 21)

COMPUTER ONLY

~O REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIRE[

REQUIRED BATTERY (22)

BACKED

~O REDUNDANCY CLASS lE INDICATING YES YES NOT REQUIRED NOT REQUIRE[

QUIRED BATTERY

!LIGHT

3)

BACKED Dl0/3 17/57

. 610;-.a i

SERVICING, TESTING, RANGE

~ND CALIBRATION

=>ROG RAM

!iES (20)

IYES

1)

IYES

( 2 2)

!iES (23)

Dl0/3 18/57 Dl0/3 1. l 0-lSOOGPM 0-6000GPM 0-688°F 0-1600°F 0-100%

N/A MEASUREMENT DIRECT DIRECT DIRECT DIRECT REMARKS NO SEISMIC OR ENVIRONMENTAL QUALIFICATION TEST DATA IS AVAILABLE.

THEY WILL NOT BE REPLACED BECAUSE THERE ARE ALTERNATIVE MEASUREMENT:

1.

PRIMARY SYSTEM TEMP.

2.

RCS PUMPS RUNNING STATUS.

ACCUMULATOR TANK LEVEL RANGE DOES NOT MEE1 THE REQUIRED RANGE.

INDICATOR SCALE OF 0-100% EQUALS A RANGE OF 52.65% -

70.29% CF TOTAL VOLUME.

THIS RANGE IS USED TO MEET INSTRUMENT ACCURACIES REQUIRED BY TECH.

SPEC.

VARIABLE

!APPLICABLE APPLICABLE CATEGORY USED ENVI RONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOti QUALIFICATim QUALIFICATim ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 BORIC ACID D

2 2

YES YES YES CHARGING FLOW

( 2 4)

OW IN HPl D

2 2

YES YES YES STEM (25)

FLOW IN LPl D

2 2

YES YES YES SYSTEM

( 2 6)

REFUELING A,D 1,2 1

YES YES YES

!WATER STORAGE NK LEVEL

7)

Dl0/3 19/57

. 610;-a i

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NO REQUIRED BATTERY

( 2 4)

BACKED REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREI QUIRED BATTERY (25)

BACKED INO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIRE[

REQUIRED BATTERY

( 2 6)

BACKED IT'wo CHANNELS CLASS lE INDICATORS YES YES YES NO (3/4" CONNECTION BATTERY BOTH TANK)

BACKED CHANNELS

7)

Dl0/3 20/57

• fno;-3 i

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES

( 2 4)

YES

( 2 5)

YES

( 2 6)

YES (27) 10/3 21/57 DlO/J L 1 0-200 GPM 0-800 GPM 0-800 GPM 0-48' MEASUREMENT DIRECT DIRECT DIRECT DIRECT REMARKS THE INSTRUMENTATION RANGE DOES NOT MEET THE REQUIRED RANGE OF TOP-T-BOTTOM.

THE HT. OF THE TANK IS 48 FT. AND THE INSTALLED RANGE IS 2.5 FT. TO 45.24 FT. ELEVATION 45.24 FEET. IS THE OVERFLOW LEVEL.

THIS RANGE ADEQUATELY COVERS TECH. SPEC. REQUIREMENT, THEREFORE, NO CHANGE WILL BE MADE.

VARIABLE IA.PPL I CABLE APPLICABLE CATEGORY USED ENVIRONMENT AI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOt>

QUALIFICATIOt>

QUALIFICATim ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 REACTOR D

~

3 NOT REQUIRED NOT REQUIRED r OT REQUIRED t:OOLANT PUMP 8TATUS

( 28)

IMARY SYSTEM D

2 2

YES YES YES SAFETY RELIEF fiTALVE POSITION (INCLUDING PORV &

oDE VALVE) OR

~'LOW THROUGH OR bRESSURE IN RELIEF VALVE LINES.

2 9)

JRESSURE LEVEL A,D 1

1 YES YES YES 3 0)

Dl0/3 22/57 Dl0/-3 1

r REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY INO REDUNDANCY NON-CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREID

!REQUIRED*

STATION

( 2 8)

POWER REDUNDANCY CLASS lE INDICATORS YES YES NOT REQUIRED NOT REQUIREI

.L QUIRED BATTERY (29)

BACKED FOUR CHANNELS CLASS lE INDICATORS-YES YES YES YES (3/4" CONNECTION BATTERY ONE CHANNEI ON PRESSURIZER BACKED EACH

!VESSEL)

RECORDER -

( 3 0)

ONE CHANNEI Dl0/3 23/57 Dl0/-3 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES (28)

YES (29)

YES

( 3 0)

Dl0/3 24/57

• rho/-3 1.1 0-1200 AMP N/A 0-100%

MEASUREMENT DIRECT DIRECT DIRECT REMARKS THE PRESSURIZER LEVEL RANGE DOES NOT MEET THE REQUIRED RANGE OF TOP-TO-BOTTOM.

THE INDICATOR SCALE OF 0-100% EQUALS A RANGE OF 3'4" TO 47'2".

THIS RANGE IS USED TO MEET INSTRUMENT ACCURACIES REQUIRED BY THE TECH. SPEC.

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENT AI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOJ.'.

QUALIFICATIOt-QUALIFICATim ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3

!PRESSURIZER D

2 2

NO NO NO HEATER STATUS CURRENT

( 31)

ENCH TANK D

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIREI VEL (PRESSURIZER

!RELIEF TANK)

( 3 2)

QUENCH TANK D

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIREI IT'EMP.

(PRESSURIZER

!RELIEF TANK)

( 3 3) r ENCH TANK D

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIREI RESSURIZER

!RELIEF TANK)

-( 3 4)

Dl0/3 25/57

• 610/-3 i

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY HEATERS USE INDICATOR YES YES NOT REQUIRED NOT REQUIREI REQUIRED STATION ONE EACH (31)

POWER BUT PHASE USE DIESEL POWER AS BACKUP.

INDICATORS ARE CLASS lE BATTERY BACKED INO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREI REQUIRED BATTERY

( 3 2)

BACKED NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREI

!REQUIRED BATTERY

3)

BACKED NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREI REQUIRED BATTERY

( 3 4)

BACKED Dl0/3 26/57 Dl 0/-3 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES 0-800 AMP

( 31) s 0-100%

2)

YES

( 3 3)

Dl0/3 27/57 Dl0/3 1.1 50°F -

350°F 0-100 PSI MEASUREMENT DIRECT DIRr;CT DIRECT DIRECT REMARKS REFER TO COMPLIANCE LEVEL 2 OF PSE&G RESPONSE TO REG GUIDE 1.97 DATED APRIL 2, 1981.

rHE TANK IS 9 FT, 6 INCHES HIGH.

THE INDICATOR SCALE OF 0-100% EQUALS A RANGE OF 7 INCHES TO 8 FEET 11 INCHES.

THIS RANGE

~DEQUATELY COVERS TECH. SPEC. REQUIREMENTS.

fHE INSTALLED INSTRUMENT RANGE OF 50°F TO 350° DOES NOT MEET THE REQUIRED RANGE OF J0°F TO 750°F.

THE DESIGN PRESS. OF THE rANK RUPTURE DISK IS 85 PSIG.

THE 3ATURATED TEMP. AT THIS PRESSURE IS 328°F.

VARIABLE

/.\\.PPL I CABLE APPLICABLE CATEGORY USED ENVIRONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATI01' QUALIFICATim QUALIFICATIDr ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 STEAM GENERATOR D

1 1

YES YES YES LEVEL (WIDE RANGE)

(35)

EAM GENERATOR A,D 1,2 1

YES YES YES PRESSURE

( 3 6)

SAFETY/RELIEF D

2 2

YES YES YES VALVE POSITIONS OR MAIN STEAM FLOW (37)

IN FEEDWATER D

3 3

NOT REQUIREI1 NOT REQUIRED NOT REQU IREI FLOW

( 3 8)

Dl0/3 28/57

-ino/-3 i

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY bNE CHANNEL CLASS lE ONE RECORDE R YES YES NO NO (3/4" CONNECTIONS BATTERY PER STEAM ON EACH STEAM BACKED GENERATOR GENERATOR)

( 3 5)

REE CHANNELS CLASS lE INDICATORS -

YES YES YES YES (MAIN STEAM BATTERY THREE LINE BETWEEN BACKED CHANNELS IEACH STEAM GENERATOR AND MIXING BOTTLE)

( 3 6)

TWO CHANNELS CLASS lE INDICATOR-YES YES YES YES (OUTLET FROM BATTERY ONE CHANNE L

!EACH STEAM BACKED RECORDER-

ENERATOR TO ONE CHANNEI VJ.IXING BOTTLE)

I 3 7)

NO REDUNDANCY INSTRUMENT IINDICATORS YES YES NOT REQUIRED NOT REQUIREI

!REQUIRED NON-VITAL

( 3 8)

NOT BATTERY BACKED Dl0/3 29/57 610/-3 1

SERVICING, TESTING, RANGE MEASUREMENT REMARKS AND CALIBRATION PROGRAM YES 0-500 IN DIRECT

~UXILIARY FEEDWATER FLOW CAN BE USED AS (35) 3ACKUP INDICATION OF LEVEL.

REDUNDANCY

~XISTS FOR THE NARROW RANGE LEVEL

~NDICATION 0-120%.

s 0-1200 PSI DIRECT

( 3 6)

YES 0-120%

DIRECT

( 3 7)

YES 0-120%

DIRECT

( 3 8)

Dl0/3 30/57 Dl0/3 1. 1

VARIABLE

!APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENT AI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIOl' QUALIFICATIOl' QUALIFICATim ASSURANCE (VARIABLE REF. NO.) rrYPE A,B,C,D,E 1,2,3 1,2,3 A.UXILIARY A,D 1,2 1

YES YES YES

~EEDWATER FLOW (39)

NDENSATE A

1 1

NO YES YES STORAGE TANK WATER LEVEL (AUX. FEED-WATER STORAGE TANK)

( 4 0)

CONTAINMENT D

2 2

N/A N/A N/A SPRAY FLOW

( 41) 10/3 31/57 010/.3 i

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY TWO CHANNELS CLASS lE INDICATORS -

YES YES YES NO (ON DISCHARGE BATTERY BOTH FROM AUX.FEED BACKED CHANNELS PUMPS TO STEAM GENERATORS)

( 3 9)

TWO CHANNELS CLASS lE INDICATORS -

YES YES YES NO (ON AUX. FEED BATTERY BOTH WATER STORAGE BACKED CHANNELS TANK)

( 4 0)

N/A N/A N/A N/A N/A N/A N/A

( 41)

Dl0/3 32/57

• Dl0/3 1

SERVICING, TESTING, RANGE MEASUREMENT REMARKS AND CALIBRATION PROGRAM YES 0-250 X 3lb/HR DIRECT (39)

YES 0-100%

DIRECT

~EVEL TRANSMITTERS DO NOT REQUIRE

( 4 0)

~NVIRONMENTAL QUALIFICATION BECAUSE OF nHEIR LOCATION IN A BENIGN ENVIRONMENT.

N/A N/A N/A tHERE ARE NO CONTAINMENT SPRAY FLOW

( 41) illEASUREMENTS.

HOWEVER, AN INDIRECT

~EASUREMENT OF SPRAY ADDITIVE FLOW RATE vARIABLE #41A IS AVAILABLE AND MEETS THE REQUIREMENTS OF REG. GUIDE 1.97.

Dl0/3 33/57 Dl0/3 1.1

VARIABLE DESCRIPTION (VARIABLE REF. NO.)

HEAT REMOVAL BY THE CONTAINMENT FAN HEAT REMOVAL SYSTEM

( 4 2)

CONTAINMENT

~TMOSPHERE

!TEMP.

( 4 3)

CONTAINMENT SUMP WATER IT'EMP.

( 4 4) eves MAKE-UP FLOW-IN

( 4 5) eves MAKE-UP FLOW

( 4 6)

~. 010/3 l Dl0/3 34/57

~PPLICABLE VARIABLE TYPE A,B,C,D,E D

D D

D D

APPLICABLE CATEGORY USED ENVIRONMENT AI SEISMIC QUALITY CATEGORY FOR EVALUATIOJ':I QUALIFICATim QUALIFICATIOrn ASSURANCE 1,2,3 1,2,3 2

2 YES YES YES 2

2 NO NO NO 2

2 N/A N/A N/A 2

2 YES YES YES 2

2 YES YES YES

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE INDICATORS YES YES NOT REQUIRED NO REQUIRED BATTERY BACKED

( 4 2)

NO REDUNDANCY N/A PROCESS YES YES NOT REQUIRED NOT REQUIREI QUIRED COMPUTER

3)

N/A N/A N/A N/A N/A N/A N/A

( 4 4)

NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NO REQUIRED BATTERY

( 4 5)

BACKED 0 REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NO QUIRED BATTERY

( 4 6)

BACKED Dl0/3 35/57

- Dl0/3 1

SERVICING, TESTING, RANGE MEASUREMENT REMARKS

~ND CALIBRATION IP ROG RAM

!YES 0-30 x 102 GPM DIRECT COOLING WATER FLOW THROUGH THE CONTAINMEN1

( 4 2)

FAN COIL UNITS WILL BE USED TO DETERMINE THIS PARAMETER.

s 0-400°F DIRECT

3)

N/A N/A N/A SEE JUSTIFICATION ON THE PAGE ENTITLED

( 4 4)

"JUSTJFICATION FOR NON-CONFORMANCE TO REGULATORY GUIDE 1.97

• II YES 0-200 GPM DIRECT

( 4 5)

..,,s 0-200 GPM DIRECT (46)

Dl0/3 36/57 010/3 1. 1

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAJ, SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATim QUALIFICATIO!

QUALIFICATiorn ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 eves VOLUME D

2 2

NO YES YES CONTROL TANK LEVEL

( 4 7)

MPONENT D

2 2

NO NO NO COOLING WATER TEMP. TO ESF SYSTEM

( 4 8)

COMPONENT D

2 2

NO YES YES COOLING WATER FLOW TO ESF SYSTEM (49)

HIGH LEVEL D

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIRE )

RADIOACTIVE LIQUID TANK

( 5 0)

Dl.0/3 3 7 /5 7

. 810/3 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NO REQUIRED BATTERY

( 4 7)

BACKED REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NOT REQUIREI QUIRED BATTERY

( 4 8)

BACKED NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED NO REQUIRED BATTERY

( 4 9)

BACKED NO REDUNDNCY NON-CLASS lE RECORDER YES YES NOT REQUIRED NOT REQUIREI REQUIRED STATION (50)

POWER Dl0/3 38/57 0101-_3 l

pERVICING, TESTING, RANGE f\\ND CALIBRATION

)ROG RAM

~ES 0-100%

(47)

. YES 5°-200°F

( 4 8) rf ES (49)

Dl0/3 39/57 Dl0/3 1. 1 o-1ox103 GPM 0-100%

MEASUREMENT DIRECT DIRECT DIRECT DIRECT REMARKS

1.

THE INSTALLED RANGE DOES NOT MEET THE REQUIRED TOP-TO-BOTTOM RANGE.

THE INDICATOR SCALE RANGE OF 0-100% EQUALS A RANGE OF 16.5 -

85% OF TOTAL VOLUME.

THIS RANGE ADEQUATELY COVERS TECH. SPEC.

REQUIREMENT.

ALSO THE 100% LEVEL INDICATION REPRESENTS THE OVERFLOW LINE LOCATION.

THIS INSTRUMENT IS NOT REQUIREI FOR ACCIDENT

• TRANSMITTER LOCATED IN BENIGN ENVIRONMENT TRANSMITTER LOCATED IN BENIGN ENVIRONMENT.

THIS COMPONENT COOLING FLOW WILL ONLY BE AVAILABLE DURING PERIODS OF RECIRCULATION.

HOWEVER, THE OPERATOR HAS AVAILABLE PUMP MOTOR BREAKER POSITION AND CURRENT.

VARIABLE

!APPLICABLE

!APPLICABLE CATEGORY USED ENVIRONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATI01' QUALIFICATI01' QUALIFICATI01' ASSURANCE (VARIABLE REF. NO.) ['YPE A,B,C,D,E 1,2,3 1'2 '3 RADIOACTIVE D

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIRE I GAS HOLD UP TANK PRESSURE (51)

EMERGENCY D

')

?

NO YES YES TILATION DAMPER.

SITION CONTROL ROOM

( 5 2)

EMERGENCY D

2

• 2 NO YES YES

!VENTILATION DAMPER POSITION AUX.

BLDG.

(52A)

EMERGENCY D

2 2

NO YES YES

!VENTILATION DAMPER POSITION FUEL NDLING BLDG.

2B)

STATUS OF STAND-D 2

2 NO YES YES BY POWER (53)

DlQ/3 40/57

• Dl0/3 1

REDUNDANCY &

POWER

~ONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE RECORDER YES YES NOT REQUIRED NOT REQUIREI REQUIRED BATTERY (51)

BACKED NO REDUNDANCY CLASS lE INDICATORS YES YES YES.

YES QUIRED BATTERY

2)

BACKED NO REDUNDANCY CLASS lE ISPDS YES YES YES YES REQUIRED BATTERY 2RT

( 52A)

BACKED NO REDUNDANCY CLASS lE SPDS YES YES YES YES REQUIRED BATTERY CRT (52B)

BACKED NO REDUNDANCY CLASS lE INDICATORS YES YES NOT.REQUIRED N/A

( 5 3)

BATTERY BACKED (TO INDICATORS)

Dl9/3 41/57

• Dl0/3 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES (51)

YES

( 5 2) e YES

( 52A)

YES

( 52B)

YES

3)

Dl0/3 42/57

- Dl0/_3 1.1 N/A N/A N/A N/A 0 -

5 K VOLTS 0 -

1000 AMPS MEASUREMENT DIRECT DIRECT DIRECT DIRECT DIRECT REMARKS CONTROL ROOM DAMPERS LIMIT SWITCHES LOCATED IN BENIGN ENVIRONMENT IAUX. BLDG. DAMPER LIMIT SWITCHES LOCATED IN BENIGN ENVIRONMENT.

NO CONTROL ROOM INDICATION.

FUEL HANDLING BLDG. DAMPER LIMIT SWITCHES LOCATED IN BENIGN ENVIRONMENT.

NO CONTROL

!ROOM INDICATION.

VARIABLE DESCRIPTION (VARIABLE REF. NO.)

STATUS OF CONTROL AIR

( 53A)

CONTAINMENT OR RGE EFFLUENT

4)

REACTOR SHIELD BLDG. ANNULUS EFFLUENT (55)

AUX. BLDG.

EFFLUENT (INCLUDING ANY BLDG. CONTAINING IMARY SYSTEM SES. E.G. WASTE GAS DECAY TANK)

( 5 6)

CONDENSER AIR REMOVAL SYSTEM EXHAUST (57) bl0).3 1 Dl0/3 43/57 APPLICABLE VARIABLE TYPE A,B,C,D,E D

E E

E E

APPLICABLE CATEGORY USED ENVIRONMENTAL SEISMIC QUALITY CATEGORY FOR EVALUATIOJ:\\

QUALIFICATIOI\\

QUALIFICATIOI\\

ASSURANCE 1,2,3 1,2,3 2

2 NO YES YES 2

N/A N/A N/A N/A 2

N/A N/A N/A N/A 2

N/A N/A N/A N/A 2

N/A N/A N/A N/A

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE INDICATOR YES YES NOT REQUIRED YES REQUIRED BATTERY IA.ND

( 53A)

BACKED RECORDER A

N/A N/A N/A N/A N/A N/A

4)

N/A N/A N/A N/A N/A N/A N/A (55)

N/A N/A N/A N/A N/A N/A N/A

( 5 6)

N/A N/A N/A N/A N/A N/A N/A

57)

Dl0/3 44/57 Dl0/.3 1

SERVICING, TESTING, RANGE MEASUREMENT REMARKS AND CALIBRATION PROGRAM YES 0-160 PSI DIRECT (53A)

N/A N/A N/A

( 54)

N/A N/A N/A

( 5 5)

N/A N/A N/A

( 5 6)

N/A N/A N/A

( 5 7)

Dl0/3 45/57 Dl0/3 1.1 d

VARIABLE DESCRIPTION (VARIABLE REF. NO.)

COMMON PLANT VENT OR MULTI-PURPOSE VENT DISCHARGING ANY OF THE ABOVE RELEASES (IF CONTAINMENT PURGE

~ INCLUDED)

8)

VENT FROM STEAM GENERATOR SAFETY RELIEF VALVES OR ATMOSPHERIC DUMP VALVE (59)

ALL OTHER IDENTIFIE[

ELEASE POINT CONTAMINATION BUILDING (60A)

ALL OTHER IDENTIFIE[

RELEASE POINT AUX. FEED PUMP TURBINE EXAHUST

( 6 OB)

Dl0/_3 1 Dl0/3 46/57 11\\PPLICABLE VARIABLE TYPE A,B,C,D,E E

E E

E 11\\PPLICABLE CATEGORY USED ENVIRONMENTAL SEISMIC QUALITY CATEGORY FOR EVALUATION QUALIFICATIOf:\\

QUALIFICATION ASSURANCE 1,2,3 1,2,3 2

2 NO YES YES

~

?

N/A N/A N/A 2

2 N/A N/A N/A 2

2 N/A N/A N/A

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NO REDUNDANCY CLASS lE INDICATOR -

YES YES YES REQUIRED BATTERY R41 THREE

( 5 8)

BACKED CHANNELS R45 TWO CHANNELS

!RECORDER -

R45 TWO CHANNELS N/A N/A N/A N/A N/A N/A (59)

N/A N/A

~/A N/A N/A N/A N/A

( 60A)

N/A N/A N/A N/A N/A N/A N/A (60B)

Dl0/3 47/57 Dl0/_3 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES (58)

A (59)

IN/A

( 60A)

IN/A 60B)

Dl0/3 48/57 610/3 1.1 lo-13 To 105 MICRO-CURRIE/CC N/A N/A N/A MEASUREMENT DIRECT N/A N/A N/A REMARKS NO INSTRUMENTATION EXISTS.

SEE JUSTIFICATION ON THE PAGE ENTITLED "JUSTIFICATION FOR NON-CONFORMANCE TO REGULATORY GUIDE 1.97".

THE CONSTRUCTION OF THE DECONTAMINATION BUILDING WAS CANCELLED.

NO INSTRUMENTATION EXISTS SEE JUSTIFICATION ON THE PAGE ENTITLED "JUSTIFICATION FOR NON-CONFORMANCE TO REGULATORY GUIDE 1.97."

d

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAlh SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATim QUALIFICATim QUALIFICATim[

ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1, 2, 3 ALL IDENTIFIED E

3 3

N/A N/A N/A PLANT RELEASE POINTS (EXCEPT STEAM GENERATOR, SAFETY RELIEF VALVES, OR ATMOSPHERIC STEAM MP VALVE AND NDENSER AIR REMOVAL SYSTEM EXHAUST) SAMPLING W/ONSITE ANALYSIS CAPABILITY.

(61)

RADIATION EXPOSURE E

N/A N/A N/A N/A N/A METERS CONTINUOUS INDICATION AT FIXED LOCATION.

( 6 2)

RB ORNE E

3 3

NOT REQUIRED NOT REQUIRED

~OT REQUIRED RADIOHALOGENS AND PARTICULATES (PORTABLE SAMPLING W/ONSITE ANALYSIS CAPABILITY)

( 6 3)

Di0/3 49/57

. Dl0/3 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY N/A N/A N/A N/A N/A N/A N/A (61)

N/A N/A N/A N/A N/A N/A N/A

( 6 2)

NO REDONDANCY N/A NO NO NO NOT REQUIRED NOT REQUIRlh D REQUIRED (63) 10/3 50/57

• Dl0/3 1

SERVICING, TESTING, RANGE MEASUREMENT REMARKS AND CALIBRATION PROGRAM N/A N/A N/A SAME AS VARIABLE CODE NUMBERS 18 & 58 (61)

N/A N/A N/A VARIABLE DELETED BY REGULATORY GUIDE 1.97.

( 6 2)

YES N/A DIRECT PORTABLE INSTRUMENTION.

( 6 3)

1.

STAPLEX AIR SAMPLER.

2.

EBERLINE SINGLE CHANNEL ANALYZER.

3.

GENERAC GENERATOR FOR POWER SUPPLY.

Dl0/3 51/57 DlO/~ 1.1 1.1111

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATIGr QUALIFICATirn QUALIFICATIO!

ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 PLANT & ENVIRONS E

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIREl~

RADIATION (PORTABLE INSTRUMENTATION)

(64)

ANT & ENVIRONS E

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIRED DIOACTIVITY (PORTABLE INSTRUMENTATION)

( 6 5)

WIND DIRECTION E

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIRED

( 6 6)

WIND SPEED E

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIRED

( 6 7)

ESTIMATION OF E

3 3

NOT REQUIRED NOT REQUIRED NOT REQUIRED TMOSPHERIC ABILITY

68)

PRIMARY COOLANT E

3 3

N/A N/A N/A (GRAB SAMPLE)

(69)

Dl'b/3 52/57

• 010/3 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY NOT REQUIRED N/A N/A N/A N/A N/A N/A

( 6 4)

NOT REQUIRED N/A N/A N/A N/A N/A N/A (65)

T REQUIRED NON CLASS RECORDER YES YES NOT REQUIRED NOT REQUIRE!>

( 6 6) lE STATION POWER NOT REQUIRED NON CLASS RECORDER YES YES NOT REQUIRED NOT REQUIREJD (67) lE STATION POWER NOT REQUIRED NON CLASS RECORDER YES YES NOT REQUIRED NOT REQUIREJO (68) lE STATION POWER N/A N/A N/A N/A N/A N/A N/A (69)

Dl0/3 53/57

• Dl0/3 1

SERVICING, TESTING, RANGE AND CALIBRATION PROGRAM YES lo-3 R/HR TO (64) 103 R/HR YES 0-50,000 CPM (65)

YES

( 6 6)

YES (67)

YES

68)

N/A

( 6 9)

Dl0/3 54/57 1310/J 1.1 MEETS REG. GUIDE

1. 97 REQUIRE-MENT MEETS REG. GUIDE 1.97 REQUIRE-MENTS MEETS REG. GUIDE 1.97 REQUIRE-MENTS N/A MEASUREMENT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT REMARKS THE EXISTING RANGE OF lo-3 R/HR TO 103 R/HR IS ADEQUATE FOR MEASURING RADIATION IN THE PLANT & ENVIRONS

~PORTABLE MONITORS).

PORTABLE INSTRUMENTATION

1.

EBERLINE MULTICHANNEL GAMM -

RAY SPECTROMETER.

THIS IS A GRAB SAMPLE ACCIDENT ANALYSIS SYSTEM.

_J

VARIABLE APPLICABLE APPLICABLE CATEGORY USED ENVIRONMENTAI SEISMIC QUALITY DESCRIPTION VARIABLE CATEGORY FOR EVALUATim QUALIFICATim QUALIFICATIOt ASSURANCE (VARIABLE REF. NO.) TYPE A,B,C,D,E 1,2,3 1,2,3 CONTAINMENT AIR E

i i

N/A N/A N/A (GRAB SAMPLE)

( 7 0)

NTAINMENT E

3 3

N/A N/A N/A MP (GRAB SAMPLE)

( 71)

EFFULENT c

?

?

NO YES YES RADIOACTIVITY-NOBLE GASES

( 7 2)

STEAM GENERATOR A

1 1

NO YES YES LOW DOWN DIATION

( 7 3)

Dl0/3 55/57 I 1)10/3 1

REDUNDANCY &

POWER CONTROL TSC LOCATION EOF LOCATION SEPARATION ISOLATION SENSOR LOCATION SOURCE ROOM DEVICE DISPLAY N/A N/A NO NO NO N/A N/A

( 7 0)

N/A N/A NO NO NO N/A N/A

( 71)

NO REDUNDANCY CLASS lE INDICATOR -

YES YES YES YES REQUIRED BATTERY THREE

( 7 2)

BACKED CHANNELS RECORDER -

FOUR CHANNELS FOR CHANNELS CLASS lE PLANT YES YES YES YES (ON 2" LINE BATTERY COMPUTER BETWEEN STEAM BACKED CRT ENERATOR AND OWDOWN TANK)

( 7 3)

Dl0/3 56/57 J ql0/3 1

I

.}

SERVICING, TESTING, RANGE l!\\ND CALIBRATION PROGRAM N/A N/A

( 7 0)

/A

1)

YES

( 7 2)

YES 7 3)

Dl0/3 57/57 N/A lo-13 TO 105 MICRO-CURRIE/CC MEASUREMENT DIRECT DIRECT DIRECT DIRECT REMARKS THIS IS A GRAB SAMPLE ANALYSIS SYSTEM

\\

SAME MONITORS USED AS VARIABLE NO. 58 SEISMIC IS FOR UNIT #2 ONLY.

THE MAIN STEAM RADIATION MONITORS ARE AN ALTERNATE MEANS OF DETERMINING STEAM GENERATOR BLOWDOWN RADIATION LEVEL.

THESE MONITORS MEET REG. GUIDE 1.97 REQUIREMENTS.

~\\-~~~~~~~-'-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Dl0/3 1.1