ML071800319: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 25: | Line 25: | ||
The storage of radioactive materials or radwaste generated at TMI Unit 1 and stored at TMI Unit 2 shall not result in a source term that, if released, would exceed that previously analyzed in the PDMS SAR for TMI Unit 2 in terms of off-site dose consequences. | The storage of radioactive materials or radwaste generated at TMI Unit 1 and stored at TMI Unit 2 shall not result in a source term that, if released, would exceed that previously analyzed in the PDMS SAR for TMI Unit 2 in terms of off-site dose consequences. | ||
: c. This license shall be deemed to contain and is subject to the conditions specified in the following Commission regulations 10 CFR Chapter I: Part 20, Section 30.34 of Part 30, Section 40.41 of Part 40, Section 50.54 and 50.59 of Part 50, and Section 70.32 of Part 70; is subject to all applicable provisions of the Act and to the rules, regulations, and orders of the Commission now or hereafter in effect; and is subject to the additional conditions specified or incorporated below: (1) Maximum Power Level AmerGen Energy Company, LLC is authorized to operate the facility at steady state reactor core power levels not in excess of 2568 megawatts thermal.(2) Technical Specifications The Technical Specifications contained in Appendix A. as revised through Amendment No259 are hereby incorporated in the license. The AmerGen Energy Company, LLC shall operate the facility in accordance with the Technical Specifications. | : c. This license shall be deemed to contain and is subject to the conditions specified in the following Commission regulations 10 CFR Chapter I: Part 20, Section 30.34 of Part 30, Section 40.41 of Part 40, Section 50.54 and 50.59 of Part 50, and Section 70.32 of Part 70; is subject to all applicable provisions of the Act and to the rules, regulations, and orders of the Commission now or hereafter in effect; and is subject to the additional conditions specified or incorporated below: (1) Maximum Power Level AmerGen Energy Company, LLC is authorized to operate the facility at steady state reactor core power levels not in excess of 2568 megawatts thermal.(2) Technical Specifications The Technical Specifications contained in Appendix A. as revised through Amendment No259 are hereby incorporated in the license. The AmerGen Energy Company, LLC shall operate the facility in accordance with the Technical Specifications. | ||
Amendment No. 259 | Amendment No. 259 6.8.5 Reactor Building Leakage Rate Testing Program The Reactor Building Leakage Rate Testing Program shall be established, implemented, and maintained as follows: A program shall be established to implement the leakage rate testing of the Reactor Building as required by 10 CFR 50.54(o) and 10 CFR 50, Appendix J, Option B, as modified by approved exemptions. | ||
Building Leakage Rate Testing Program The Reactor Building Leakage Rate Testing Program shall be established, implemented, and maintained as follows: A program shall be established to implement the leakage rate testing of the Reactor Building as required by 10 CFR 50.54(o) and 10 CFR 50, Appendix J, Option B, as modified by approved exemptions. | |||
This program shall be in accordance with the guidelines contained in Regulatory Guide 1.163, "Performance-Based Containment Leak-Test Program," dated September 1995, as modified by the following exception to NEI 94-01, Rev. 0, "Industry Guideline for Implementing Performance-Based Option of 10 CFR Part 50, Appendix J": a. Section 9.2.3: The first Type A test performed after the September 1993 Type A test shall be performed prior to startup from the T1 R18 refueling outage. The T1 R1 8 refueling outage will begin no later than November 1, 2009.The peak calculated Reactor Building internal pressure for the design basis loss of coolant accident, Pc, is 50.6 psig.The maximum allowable Reactor Building leakage rate, La, shall be 0.1 weight percent of containment atmosphere per [[estimated NRC review hours::24 hours]] at Pac.Reactor Building leakage rate acceptance criteria is < 1.0 La. During the first plant startup following each test performed in accordance with this program, the leakage rate acceptance criteria are < 0.60 L, for the Type B and Type C tests and -< 0.75 La for the Type A tests.6-11 c Amendment No. 2 0 1, 2 4 4 , 259}} | This program shall be in accordance with the guidelines contained in Regulatory Guide 1.163, "Performance-Based Containment Leak-Test Program," dated September 1995, as modified by the following exception to NEI 94-01, Rev. 0, "Industry Guideline for Implementing Performance-Based Option of 10 CFR Part 50, Appendix J": a. Section 9.2.3: The first Type A test performed after the September 1993 Type A test shall be performed prior to startup from the T1 R18 refueling outage. The T1 R1 8 refueling outage will begin no later than November 1, 2009.The peak calculated Reactor Building internal pressure for the design basis loss of coolant accident, Pc, is 50.6 psig.The maximum allowable Reactor Building leakage rate, La, shall be 0.1 weight percent of containment atmosphere per [[estimated NRC review hours::24 hours]] at Pac.Reactor Building leakage rate acceptance criteria is < 1.0 La. During the first plant startup following each test performed in accordance with this program, the leakage rate acceptance criteria are < 0.60 L, for the Type B and Type C tests and -< 0.75 La for the Type A tests.6-11 c Amendment No. 2 0 1, 2 4 4 , 259}} |
Revision as of 23:27, 12 July 2019
ML071800319 | |
Person / Time | |
---|---|
Site: | Three Mile Island ![]() |
Issue date: | 06/29/2007 |
From: | NRC/NRR/ADRO/DORL/LPLI-2 |
To: | |
Bamford, Peter J., NRR/DORL 415-2833 | |
Shared Package | |
ML071650511 | List: |
References | |
TAC MD3027 | |
Download: ML071800319 (2) | |
Text
-3-(2) AmerGen Energy Company. LLC, pursuant to the Act and 10 CFR Parts 30.40 and 70 to receive, possess and use at any time any byproduct, source and special nuclear material as reactor fuel, sealed neutron sources for reactor startup, sealed sources for reactor instrumentation and radiation monitoring equipment calibration, and as fission detectors in amounts as required for reactor operation; (3) AmerGen Energy Company, LLC, pursuant to the Act and 10 CFR Parts 30, 40 and 70 to receive, possess at either TMI-I or TMI-2, and use in amounts as required for TMI-1 any byproduct, source or special nuclear material without restriction to chemical or physical form, for sample analysis, testing, instrument calibration, or associated with radioactive apparatus or components.
Other than radioactive apparatus and components to be used at TMI Unit 2 in accordance with the TMI-2 License, the radioactive apparatus and components that may be moved from TMI Unit I to TMI Unit 2 under this provision shall be limited to: (1)outage-related items (such as contaminated scaffolding, tools, protective clothing, portable shielding and decontamination equipment);
and (2) other equipment belonging to TMI Unit 1 when storage of such equipment at TMI-2 is deemed necessary for load handling or contamination control considerations; (4) AmerGen Energy Company, LLC, pursuant to the Act and 10 CFR Parts 30 and 70, to possess at the TMI Unit 1 or Unit 2 site, but not separate, such byproduct and special nuclear materials as may be produced by the operation of either unit. Radioactive waste may be moved from TMI Unit 2 to TMI Unit 1 under this provision for collection, processing (including decontamination), packaging, and temporary storage prior to disposal.
Radioactive waste that may be moved from TMI Unit 1 to TMI Unit 2 under this provision shall be limited to: (1) dry active waste (DAW) temporarily moved to TMI Unit 2 during waste collection activities, and (2) contaminated liquid contained in shared system piping and tanks. Radioactive waste that may be moved from TMI Unit 1 to TMI Unit 2 under this provision shall not include spent fuel, spent resins, filter sludge, evaporator bottoms, contaminated oil, or contaminated liquid filters.The storage of radioactive materials or radwaste generated at TMI Unit 2 and stored at TMI Unit I shall not result in a source term that, if released, would exceed that previously analyzed in the UFSAR in terms of offsite dose consequences.
The storage of radioactive materials or radwaste generated at TMI Unit 1 and stored at TMI Unit 2 shall not result in a source term that, if released, would exceed that previously analyzed in the PDMS SAR for TMI Unit 2 in terms of off-site dose consequences.
- c. This license shall be deemed to contain and is subject to the conditions specified in the following Commission regulations 10 CFR Chapter I: Part 20, Section 30.34 of Part 30, Section 40.41 of Part 40, Section 50.54 and 50.59 of Part 50, and Section 70.32 of Part 70; is subject to all applicable provisions of the Act and to the rules, regulations, and orders of the Commission now or hereafter in effect; and is subject to the additional conditions specified or incorporated below: (1) Maximum Power Level AmerGen Energy Company, LLC is authorized to operate the facility at steady state reactor core power levels not in excess of 2568 megawatts thermal.(2) Technical Specifications The Technical Specifications contained in Appendix A. as revised through Amendment No259 are hereby incorporated in the license. The AmerGen Energy Company, LLC shall operate the facility in accordance with the Technical Specifications.
Amendment No. 259 6.8.5 Reactor Building Leakage Rate Testing Program The Reactor Building Leakage Rate Testing Program shall be established, implemented, and maintained as follows: A program shall be established to implement the leakage rate testing of the Reactor Building as required by 10 CFR 50.54(o) and 10 CFR 50, Appendix J, Option B, as modified by approved exemptions.
This program shall be in accordance with the guidelines contained in Regulatory Guide 1.163, "Performance-Based Containment Leak-Test Program," dated September 1995, as modified by the following exception to NEI 94-01, Rev. 0, "Industry Guideline for Implementing Performance-Based Option of 10 CFR Part 50, Appendix J": a. Section 9.2.3: The first Type A test performed after the September 1993 Type A test shall be performed prior to startup from the T1 R18 refueling outage. The T1 R1 8 refueling outage will begin no later than November 1, 2009.The peak calculated Reactor Building internal pressure for the design basis loss of coolant accident, Pc, is 50.6 psig.The maximum allowable Reactor Building leakage rate, La, shall be 0.1 weight percent of containment atmosphere per 24 hours1 days <br />0.143 weeks <br />0.0329 months <br /> at Pac.Reactor Building leakage rate acceptance criteria is < 1.0 La. During the first plant startup following each test performed in accordance with this program, the leakage rate acceptance criteria are < 0.60 L, for the Type B and Type C tests and -< 0.75 La for the Type A tests.6-11 c Amendment No. 2 0 1, 2 4 4 , 259