Pages that link to "Kane S"
← Kane S
Jump to navigation
Jump to search
The following pages link to Kane S:
Displayed 16 items.
- ML20295A491 (← links)
- ML21201A266 (← links)
- ML21201A265 (← links)
- ML21201A263 (← links)
- ML21201A261 (← links)
- ML21201A312 (← links)
- ML23130A013 (← links)
- ML23144A343 (← links)
- ML20328A146 (← links)
- 05000245/LER-1988-007-01, :on 880908,discovered Emergency Svc Water self- Cleaning Strainer Drive Motor B 480-volt Breaker in Tripped Position.Caused by Failure of Packing Gland Follower Bolting on Strainer.Level Switch Installed (← links)
- 05000245/LER-1986-010-01, :on 860326,isolation Condenser Condensate Return Valve 1-IC-3 Failed to Open During Surveillance Testing.Caused by Motor Operator Torque Switch Trip. Operating Procedure Revised (← links)
- 05000245/LER-1988-005-02, :on 880527,containment Spray Interlock Setpoint Insufficient to Ensure ECCS Pump Cavitation Would Not Occur.Emergency Operating Procedures Revised to Ensure Sufficient Pressure Maintained (← links)
- 05000245/LER-1988-004, :on 880318,determined Potential Fouling of ECCS Suction Strainers.Caused by Insufficient Area of Existing Strainers.Project Assignment Initiated to Replace ECCS Suction Strainers (← links)
- 05000245/LER-1986-006-01, :on 860206,valve 1-MS-1D Produced Dual Position Indication When Control Switch Placed in Closed Position. Caused by Slightly Warped Slide Plate.Slide Plate & Contact Block Replaced (← links)
- 05000245/LER-1988-004-02, :on 880318,discovered Potential for ECCS Pump Suction Strainers to Foul W/Fibrous Insulation Debris.Caused by Insufficient Area of Existing Strainers.Strainers Replaced (← links)
- 05000245/LER-1988-001-01, :on 880120,discharge Valve Inadvertently Opened to Unsampled Floor Drain Sample Tank B.Caused by Personnel Failure to Follow Operating Procedure.Operator Disciplined & Procedure Controls Implemented (← links)