Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• ML20040F038  + (Value/Impact Statement of Reg Guide 3.49, Design of Independent Spent Fuel Storage Installation (Water-Basin Type). Reg Guide Endorsing ANSI/ANS57.7-1981 Should Be Published)
• ML19240B988  + (Value/Impact Statement of Reg Guide 8.27, Radiation Protection Training for Personnel at Light-Water-Cooled Nuclear Power Plants. Reg Guide Has Been Issued)
• ML19242C970  + (Value/Impact Statement on Amend of 10CFR34)
• ML19212A217  + (Value/Impact of Proposed Revision 1 to Reg Guide 1.38:QA Program Requirements for Packaging,Shipping,Receiving, Storage & Handling of Items for Water-Cooled Nuclear Power Plants)
• ML19212A222  + (Value/Impact of Proposed Revision 1 to Reg Guide 1.123,QA Requirements for Control of Procurement of Items & Svc for Nuclear Power Plants)
• ML19212A218  + (Value/Impact of Proposed Revision 2 to Reg Guide 1.38:QA Requirements for Packaging,Shipping,Receiving,Storage & Handling of Items for Water-Cooled Nuclear Power Plants)
• ML19341A159  + (Valuing Environ Via Bidding Games:Psychological Perspective, Interim Rept,Excerpt from NUREG/CR-0989,Vol 2, App D)
• ML20058C225  + (Valuing Morbidity White Paper)
• PMNS20201083, Valuing Nonfatal Cancer Risks in Cost-Benefit Analyses  + (Valuing Nonfatal Cancer Risks in Cost-Benefit Analyses)
• 05000237/LER-1982-040-03, Valve 2-1601-33A Exhibited Binding During Movement.Caused by Excess Packing Grease in Chevron Packing Seal.Packing Grease Bled Out.Valve Tested & Determined Operable  + (Valve 2-1601-33A Exhibited Binding During Movement.Caused by Excess Packing Grease in Chevron Packing Seal.Packing Grease Bled Out.Valve Tested & Determined Operable)
• ML20077P976  + (Valve Actuator Motor Degradation)
• ML20261M994  + (Valve Assembly - Gate 16 Inch,921 Lb,Cs,Hydraulic Operator. Sheet 1 of 2)
• ML20261M986  + (Valve Assembly - Gate 16 Inch,921 Lb,Cs,Hydraulic Operator. Sheet 1 of 2)
• ML20261M997  + (Valve Assembly - Gate 16 Inch,921 Lb,Cs,Hydraulic Operator. Sheet 2 of 2)
• ML20261M990  + (Valve Assembly - Gate 16 Inch,921 Lb,Cs,Hydraulic Operator. Sheet 2 of 2)
• ML20265C403  + (Valve Assembly - Mark I 4 Inch Class 1500 Cv 72 Channel/ Stream B/W Ends Limitorque Actuator. Sheet 1 of 1)
• ML20261N000  + (Valve Assembly - Tilting Disk,16 Inch,921 Lb,Cs. Sheet 1 of 1)
• ML20265F529  + (Valve Assembly 4 Inch 1500 LB Gate Cres Sch 80.Sheet 1 of 1)
• ML20266E162  + (Valve Assembly 6 INCH,1500 Lb,Gate Valve Cs.Sheet 1 of 1. Actual Drawing Number:Mcm 1205.00-0989)
• ML20265F520  + (Valve Assembly 6 Inch 1500 LB Gate Valve CS Sch 8C.Sheet 1 of 1)
• ML20265F515  + (Valve Assembly 8 Inch 300 LB Swing Check Valve Cres.Sheet 1 of 1)
• ML20265F506  + (Valve Assembly 8 Inch 600 LB Gate Valve Cres.Sheet 1 of 1)
• ML20265F497  + (Valve Assembly 8 Inch 600 LB Gate Valve Cressoh A-20.Sheet 1 of 1)
• ML20265F548  + (Valve Assembly Gate 4 in 1500 LB Cres Sch 160.Sheet 1 of 1)
• ML20265F544  + (Valve Assembly Gate 4 in 1500 LB Cres with Motor Oper Sch 160.Sheet 1 of 1)

• ML20265F502  + (Valve Assembly Gate 6 Inch 150 LB Cres.Sheet 1 of 1)

• ML20266A108  + (Valve Assy 12 Inch 1512 Gate Cres with Motor Oper Sch 140. Sheet 2 of 2)
• ML20265F511  + (Valve Assy 4 Inch 300 LB Swing Check Valve Cres.Sheet 1 of 1)
• ML20265F538  + (Valve Assy Gate 4 Inch 1512 LB Cres with Motor Oper Sch 160. Sheet 1 of 1)
• ML20265F532  + (Valve Assy Gate 4 Inch 1512 LB Cres with Motor Oper Sch 160. Sheet 1 of 1)
• ML20265F524  + (Valve Assy Gate 4 Inch 900 LB Cres with Motor Cpep Sch 80. Sheet 1 of 1)
• Information Notice 1989-01, Valve Body Erosion  + (Valve Body Erosion)
• ENS 51024  + (Valve Classified as Item Relied on for Safety Failed to Operate as Designed)
• 05000416/LER-2023-001-01, Valve Closure Test Failure Resulting in Condition Prohibited by Technical Specification  + (Valve Closure Test Failure Resulting in Condition Prohibited by Technical Specification)
• 05000416/LER-2023-001, Valve Closure Test Failure Resulting in Condition Prohibited by Technical Specification  + (Valve Closure Test Failure Resulting in Condition Prohibited by Technical Specification)
• ML20058C530  + (Valve Comparison Between 3M26 HCU-65 Spec Safety Valve & 3M26 HC-75 Safety Valve)
• 05000387/LER-1983-140-03, Valve Controlling Cooling Water Flow to HPCI Lube Oil Cooler & Barometric Condenser Would Not Cycle Electrically.Caused by Torque Switch Not Actuating Due to Conditions in Spring Pack  + (Valve Controlling Cooling Water Flow to HPCI Lube Oil Cooler & Barometric Condenser Would Not Cycle Electrically.Caused by Torque Switch Not Actuating Due to Conditions in Spring Pack)
• 05000316/LER-2076-017, Valve FMO-211 (Auxiliary Feedwater Regulating Valve) Found to Be Installed Improperly  + (Valve FMO-211 (Auxiliary Feedwater Regulating Valve) Found to Be Installed Improperly)
• ENS 47036  + (Valve Failed Leak Test Due to a Disc/Shaft Assembly Machining Issue)
• ENS 49279  + (Valve Failed to Close as Required on Low Temperature Interlock)
• Information Notice 1995-25, Valve Failure During Patient Treatment with Gamma Stereotactic Radiosurgery Unit  + (Valve Failure During Patient Treatment with Gamma Stereotactic Radiosurgery Unit)
• 05000280/LER-1980-013-03, Valve HCV-1852A to Tank 1-SI-TK-1A Delayed Closing 30-50 Secs,Resulting in Tank Draining Below Tech Spec Level.Caused by Moisture in Air Lines Feeding Valve Operator.Tank Filled to Tech Spec Level  + (Valve HCV-1852A to Tank 1-SI-TK-1A Delayed Closing 30-50 Secs,Resulting in Tank Draining Below Tech Spec Level.Caused by Moisture in Air Lines Feeding Valve Operator.Tank Filled to Tech Spec Level)
• ENS 48071  + (Valve Improperly Aligned for Accident Mitigation)
• ML18047A453  + (Valve Inlet Fluid Conditions for Pressurizer Safety & Relief Valves in C-E Designed Plants, Interim Rept)
• ML20062E680  + (Valve Inlet Fluid Conditions for Pressurizer Safety & Relief Valves,Me Yankee Power Station)
• ML18047A460  + (Valve Inlet Fluid Conditions for Pressurizer Safety & Relief Valves for B&W 177- & 205-FA Plants, Summary Rept)
• ML18047A457  + (Valve Inlet Fluid Conditions for Pressurizer Safety & Relief Valves in Westinghouse-Designed Plants, Interim Rept)
• ML19249D857  + (Valve Inservice Testing Program for Class 1,2 & 3 Valves)
• ML20261N053  + (Valve Instrument. Sheet 1 of 1)
• ML17250A562  + (Valve Interlock Verification-Feedwater Isolation)
• 05000387/LER-2012-005, Valve Internal Misalignment Resulting in Multiple Inoperable Main Steam Safety Relief Valves  + (Valve Internal Misalignment Resulting in Multiple Inoperable Main Steam Safety Relief Valves)