Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- ML19242D259 + (ML19242D259)
- ML19242D260 + (ML19242D260)
- ML19242D261 + (ML19242D261)
- ML19242D262 + (ML19242D262)
- ML19242D263 + (ML19242D263)
- ML19242D264 + (ML19242D264)
- 05000334/LER-1979-020-01, /01T-0 on 790724:during Insp,Inoperable Pipe Hanger Baseplate Observed.Caused by Improper Installation of Concrete Expansion Anchors in Baseplate Due to Lack of Formal Procedures During Initial Installation + (ML19242D265)
- ML19242D266 + (ML19242D266)
- 05000304/LER-1979-040, Forwards LER 79-040/03L-0 + (ML19242D268)
- ML19242D270 + (ML19242D270)
- ML19242D271 + (ML19242D271)
- 05000263/LER-1979-015, Forwards LER 79-015/03L-0 + (ML19242D272)
- ML19242D273 + (ML19242D273)
- 05000304/LER-1979-040-03, /03L-0 on 790724:steam Generator Level 2L-538 Indicated 20% Higher than Other Channels for Steam Generator D.Caused by Faulty Power Supply,Model 4111085-001.Power Supply Replaced W/Calibr Spare + (ML19242D274)
- ML19242D275 + (ML19242D275)
- 05000295/LER-1979-044, Forwards LER 79-044/99X-0 + (ML19242D276)
- ML19242D278 + (ML19242D278)
- 05000295/LER-1979-044-99, /99x-0 on 790608:operators Manually Initiated Safety Injection After False Steam Pressure Differential Signals Caused Control Room Safety Injection Annunciation. Caused by Waterhammer Shock in Steam Generator Loop D + (ML19242D279)
- ML19242D280 + (ML19242D280)
- 05000344/LER-1979-010, Forwards LER 79-010/03L-0 + (ML19242D281)
- 05000366/LER-1979-082, Forwards LER 79-082/03L-0 + (ML19242D283)
- ML19242D284 + (ML19242D284)
- 05000346/LER-1979-079, Forwards LER 79-079/03L-0 + (ML19242D285)
- ML19242D286 + (ML19242D286)
- 05000344/LER-1979-010-03, /03L-0 on 790525:two Valves Found Leaking During Local Leak Rate Testing.Caused by Uneven Seating of Two Gate Valves Between Disc & Seat.Valves Repaired & Retested + (ML19242D287)
- ML19242D288 + (ML19242D288)
- 05000366/LER-1979-082-03, /03L-0 on 790725:switch in low-low Water Level Recirculation Pump Logic Inoperable.Caused by Trash on Switch Contacts.Contacts Cleaned & Tested.Maint Request Issued to Inspect & Clean Other Switches + (ML19242D294)
- 05000346/LER-1979-079-03, /03L-0 on 790712:while Repositioning Group 8, Absolute Position Indication for Rod 4 Shifted from 25% to 0% Position.Caused by Oxide Film Buildup on Reed Switch Contacts.Corrective Maint Performed + (ML19242D300)
- ML19242D317 + (ML19242D317)
- ML19242D319 + (ML19242D319)
- ML19242D323 + (ML19242D323)
- 05000259/LER-1979-012, Forwards LER 79-012/03L-0 + (ML19242D334)
- NUREG-1350 Volume 31, Information Digest 2019-2020, Chapter 7, Appendices + (ML19242D336)
- ML19242D337 + (ML19242D337)
- ML19242D338 + (ML19242D338)
- ML19242D339 + (ML19242D339)
- 05000295/LER-1979-052, Forwards LER 79-052/03L-0 + (ML19242D340)
- ML19242D342 + (ML19242D342)
- ML19242D344 + (ML19242D344)
- 05000295/LER-1979-052-03, /03L-0 on 790713:reactor Coolant Loop Flow Transmitter 1FT 44C Had Drifted High by 5.5%.Caused by Instrument Drift.Transmitter Readjusted to Zero & Mechanics Being Trained to Identify Drift Situation + (ML19242D345)
- 05000259/LER-1979-012-03, /03L-0 on 790710:w/unit in Normal Operation,Hpci Failed to Come to Rated Speed & Flow within Required Time Limit While SI 4.5.E.1.d & E Were Being Performed.Caused by Stop Valve FCV 73-18 Not Opening Fully Due to Loose Screw + (ML19242D346)
- ML19242D349 + (ML19242D349)
- ML19242D353 + (ML19242D353)
- ML19242D355 + (ML19242D355)
- 05000334/LER-1979-021-01, /01T on 790726:meggar Readings Indicated Degradation of Insulation Resistance During Testing of Emergency Bus GE Transformers.Cause Not Stated. Transformers Replaced W/Qualified Ite Transformers + (ML19242D356)
- 05000366/LER-1979-075, Forwards LER 79-075/03L-0 + (ML19242D359)
- ML19242D360 + (ML19242D360)
- ML19242D361 + (ML19242D361)
- 05000366/LER-1979-075-03, /03L-0 on 790716:computer Calculation Indicated Critical Mass Peaking Factor of 3.046 W/Limit of 2.38.Caused by Calibr Error.Control Rod Withdrawal Sequence Altered to Avoid Future Peaking Problems + (ML19242D362)
- ML19242D363 + (ML19242D363)
- ML19242D364 + (ML19242D364)