SVPLTR 14-0009, Core Operating Report for Cycle 23

From kanterella
Jump to navigation Jump to search
Core Operating Report for Cycle 23
ML14052A066
Person / Time
Site: Dresden Constellation icon.png
Issue date: 01/31/2014
From: Marik S
Exelon Generation Co
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
SVPLTR: #14-0009
Download: ML14052A066 (65)
v • d • e


Text

Ex Ietn1 ene :atio ... ...

January 31, 2014 SVPLTR: #14-0009 U. S. Nucdea Reguilaory Commission ATTN: Docurmnt Control Desk Washington D.C. 205565-001 Dresden Nuclear Power Stalion, Unit 3 Renmeed Facility Operat License No. DPR-25 NRC Docket No. 50-249

Subject:

Core Operati Limn Report for Unit 3 Cycle 23 The purpose of this lte is to transmit the Core Operatn Lmb Report (COLR) for Dresden Nuclear Po~we Station (DNPS) Unkt 3 opeatin cycl 23 (03C23), Revision 2 inaccordance with Technical Specifications Section 5.6.5, CORE OPERATING LIMITS REPORT (COLR).'

The COLRs for DNPS, Unit 3 was updated to i m ent orihanced language regardtin modes of opermtion.

There are no regulatoy comnmitments contained in this letter.

Should you hao any questions concerniV i letter, please conlact M. Glen Morrw at 815-416-2800.

Respectfuly Shaon MMonlk Site Vice President Dresden Nuclear Power Station Atachment: Core Opet Lkit Report for Dresden Unit 3 Cycle 23 Revision 2 cc: Regional Administrator - NRC Region IlI NRC Senior Resident Inspector - Dresden Nuclear Power Station

COLR Dresden 3 Revision 10 Page 1 of 64 1 Core Operating Limits Report For Dresden Unit 3 Cycle 23 Revision 2 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 2 of 64 1 Table of Contents Paqe

1. Term s and Definitions ............................................................................................ 5
2. General Inform ation ................................................................................................. 6
3. Average Planar Linear Heat Generation Rate ......................................................... 7
4. O perating Lim it Minim um Critical Power Ratio .................................................... 47 4.1. Manual Flow Control MCPR Lim its ................................................................. 47 4.1.1. Power-Dependent MCPR ....................................................................... 47 4.1.2. Flow-Dependent M CPR ........................................................................... 47 4.2. Scram Tim e ................................................................................................... 48 4.3. Recirculation Pum p ASD Settings ................................................................ 48
5. Linear Heat Generation Rate ................................................................................ 55
6. Control Rod Block Setpoints ................................................................................ 57
7. Stability Protection Setpoints ................................................................................. 58
8. Modes of O peration .............................................................................................. 59
9. Methodology .......................................................................................................... 62
10. References .......................................................................................................... 63 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 3 of 64 1 List of Tables Paoe Table 3-1 MAPLHG R DLO or SLO m ultiplier .......................................................................................... 7 Table 3-2 MAPLHGR for bundle/lattice: Opt2-3.93-16GZ8.00-2G6.00 Opt2-4.03-13G8.00 Opt2-4.02-18GZ8.00-14GZ5.50 Opt2-4.03-16GZ8.00-14GZ5.50 Opt2-4.07-14G5.50-2GZ5.50 Opt2-4.04-18GZ7.50-14GZ5.50 Opt2-4.05-16GZ7.50-14GZ5.50 Opt2-4.10-14G5.50-2GZ5.50 Lattices 081 and 0 8 9 ................................................................................................................................................... 7 Table 3-3 MAPLHGR for bundle/lattice: Opt2-3.93-16GZ8.00-2G,6.00 Lattice 102 ................................ 8 Table 3-4 MAPLHGR for bundle/lattice: Opt2-3.93-16GZ8.00-2G,6.00 Lattice 103 ..................................... 9 Table 3-5 MAPLHGR for bundle/lattice: Opt2-3.93-16GZ8.00-2G6.00 Lattices 104 and 105 ................ 9 Table 3-6 MAPLHGR for bundle/lattice: Opt2-3.93-16GZ8.00-2G6.00 Lattices 106, 107, and 108 .......... 10 Table 3-7 MAPLHGR for bundle/lattice: Opt2-4.03-13G8.00 Lattice 109 ............................................... 10 Table 3-8 MAPLHGR for bundle/lattice: Opt2-4.03-13G8.00 Lattices 110 and 111 .............................. 11 Table 3-9 MAPLHGR for bundle/lattice: Opt2-4.03-13G8.00 Lattices 112 and 113 ................................... 11 Table 3-10 MAPLHGR for bundle/lattice: Opt2-4.02-18GZ8.00-1,4GZ5.50 Lattice 114 ........................ 12 Table 3-11 MAPLHGR for bundle/lattice: Opt2-4.02-18GZ8.00-1,4GZ5.50 Lattice 115 ........................ 13 Table 3-12 MAPLHGR for bundle/lattice: Opt2-4.02-18GZ8.00-1.4GZ5.50 Lattice 116 ........................ 14 Table 3-13 MAPLHGR for bundle/lattice: Opt2-4.02-18GZ8.00-1,4GZ5.50 Lattice 117 ........................ 15 Table 3-14 MAPLHGR for bundle/lattice: Opt2-4.02-18GZ8.00-1,4GZ5.50 Lattice 118 ........................ 16 Table 3-15 MAPLHGR for bundle/lattice: Opt2-4.02-18GZ8.00-1,4GZ5.50 Lattice 119 ........................ 17 Table 3-16 MAPLHGR for bundle/lattice: Opt2-4.03-16GZ8.00-14GZ5.50 Lattice 120 ........................ 18 Table 3-17 MAPLHGR for bundle/lattice: Opt2-4.03-16GZ8.00-1,4GZ5.50 Lattice 121 ............................ 19 Table 3-18 MAPLHGR for bundle/lattice: Opt2-4.03-16GZ8.00-1,4GZ5.50 Lattice 122 ............................. 20 Table 3-19 MAPLHGR for bundle/lattice: Opt2-4.03-16GZ8.00-1,4GZ5.50 Lattice 123 ............................. 21 Table 3-20 MAPLHGR for bundle/lattice: Opt2-4.03-16GZ8.00-1,4GZ5.50 Lattice 124 ............................. 22 Table 3-21 MAPLHGR for bundle/lattice: Opt2-4.07-14G5.50-2GZ5.50 Lattice 125 ................................. 23 Table 3-22 MAPLHGR for bundle/lattice: Opt2-4.07-14G5.50-2GZ5.50 Lattice 126 ................................. 24 Table 3-23 MAPLHGR for bundle/lattice: Opt2-4.07-14G5.50-2GZ5.50 Lattice 127 ................................. 25 Table 3-24 MAPLHGR for bundle/lattice: Opt2-4.07-14G5.50-2GZ5.50 Lattice 128 ................................. 26 Table 3-25 MAPLHGR for bundle/lattice: Opt2-4.07-14G5.50-2GZ5.50 Lattice 129 ............................ 27 Table 3-26 MAPLHGR for bundle/lattice: Opt2-4.07-14G5.50-2GZ5.50 Lattice 130 ................................. 28 Table 3-27 MAPLHGR for bundle/lattice: Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 131 ......................... 29 Table 3-28 MAPLHGR for bundle/lattice: Opt2-4.04-18GZ7.50-1.4GZ5.50 Lattice 132 ........................ 30 Table 3-29 MAPLHGR for bundle/lattice: Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 133 ........................ 31 Table 3-30 MAPLHGR for bundle/lattice: Opt2-4.04-18GZ7.50-1,4GZ5.50 Lattice 134 ........................ 32 Table 3-31 MAPLHGR for bundle/lattice: Opt2-4.04-18GZ7.50-1,4GZ5.50 Lattice 135 ........................ 33 Table 3-32 MAPLHGR for bundle/lattice: Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 136 ........................ 34 Table 3-33 MAPLHGR for bundle/lattice: Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 137 ........................ 35 Table 3-34 MAPLHGR for bundle/lattice: Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 138 ........................ 36 Table 3-35 MAPLHGR for bundle/lattice: Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 139 ........................ 37 Table 3-36 MAPLHGR for bundle/lattice: Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 140 ........................ 38 Table 3-37 MAPLHGR for bundle/lattice: Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 141 ......................... 39 Table 3-38 MAPLHGR for bundle/lattice: Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 142 ........................ 40 Table 3-39 MAPLHGR for bundle/lattice: Opt2-4.10-14G5.50-2GZ5.50 Lattice 143 ........................... 41 Table 3-40 MAPLHGR for bundle/lattice: Opt2-4.10-14G5.50-2GZ5.50 Lattice 144 ........................... 42 Table 3-41 MAPLHGR for bundle/lattice: Opt2-4.10-14G5.50-2GZ5.50 Lattice 145 ........................... 43 Table 3-42 MAPLHGR for bundle/lattice: Opt2-4.10-14G5.50-2GZ5.50 Lattice 146 ........................... 44 Table 3-43 MAPLHGR for bundle/lattice: Opt2-4.10-14G5.50-2GZ5.50 Lattice 147 ........................... 45 Table 3-44 MAPLHGR for bundle/lattice: Opt2-4.10-14G5.50-2GZ5.50 Lattice 148 ........................... 46 T a b le 4-1 S c ra m T im e s ............................................................................................................................... 48 Table 4-2 MCPR TSSS Based Operating Limits - NFWT ..................................................................... 49 Table 4-3 MCPR TSSS Based Operating Limits - RFWT ..................................................................... 49 Table 4-4 MCPR ISS Based Operating Lim its - NFWT ............................................................................. 50 Table 4-5 MCPR ISS Based Operating Lim its - RFWT ............................................................................. 50 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 4 of 64 1 Table 4-6 MCPR NSS Based Operating Limits - NFWT ....................................................................... 51 Table 4-7 MCPR NSS Based Operating Limits - RFWT ....................................................................... 51 Table 4-8 MCPR(P) - NFWT ............................................................ .......... .................... 52 Table 4-9 MC P R (P ) - R FW T ...................................................................................................................... 53 T a b le 4-10 MC P R (F ) ................................................................................................................................... 54 Table 5-1 LHGR Limit for bundlellattice: Opt2-3.93-16GZ8.00-2G6.00/All Lattices Opt2-4.03-13G8.00/All Lattices Opt2-4.02-18GZ8.00-14GZ5.50/AIH Lattices Opt2-4.03-16GZ8.00-14GZ5.50/All Lattices Opt2-4.07-14G5.50-2GZ5.50/AII Lattices Opt2-4.04-18GZ7.50-14GZ5.50/Lattices 81 and 89 Opt2-4.05-16GZ7.50-14GZ5.50/Lattices 81 and 89 Opt2-4.10-14G 5.50-2G Z5.50/Lattices 81 and 89 ........................................................................................ 55 Table 5-2 LHGR Limit for bundle/lattice: Opt2-4.04-18GZ7.50-1,4GZ5.50/Lattices 131,132, 133, 134, 135, and 136 Opt2-4.05-16GZ7.50-14GZ5.50/Lattices 137, 138, 139, 140, 141, and 142 Opt2-4.10-14G5.50-2GZ5.50/Lattices 143, 144, 145, 146, 147, and 148 ................................. 55 Table 5-3 LH G R FA C (P) Multipliers ........................................................................................................ 56 Table 5-4 LH G R FA C (F) Multipliers ........................................................................................................ 56 Table 6-1 Rod Block Monitor Upscale Instrumentation Setpoints ........................................................ 57 Table 7-1 O PRM PBDA Trip Settings .................................................................................................. 58 T able 8-1 Modes of O peration .................................................................................................................... 59 Table 8-2 Core Thermal Power Restriction for OOS Conditions .......................................................... 60 Table 8-3 Core Thermal Power Restriction for TBVOOS ..................................... 61 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 5 of 64 1

1. Terms and Definitions APLHGR Average planar linear heat generation rate ASD Adjustable Speed Drive CPR Critical Power Ratio DLO Dual loop operation EFPH Effective full power hour EOC End of cycle EOOS Equipment out of service FWTR Final feedwater temperature reduction FWHOOS Feedwater heater out of service ICF Increased core flow ISS Intermediate scram speed LHGR Linear heat generation rate LHGRFAC(F) Flow dependent LHGR multiplier LHGRFAC(P) Power dependent LHGR multiplier LPRM Local power range monitor MAPLHGR Maximum average planar linear heat generation rate MCPR Minimum critical power ratio MCPR(F) Flow dependent MCPR MCPR(P) Power dependent MCPR MELLLA Maximum extended load line limit analysis MSIV Main steam isolation valve MWd/MTU Megawatt days per metric ton Uranium NFWT Nominal feedwater temperature NRC Nuclear Regulatory Commission NSS Nominal scram speed OLMCPR Operating limit minimum critical power ratio OOS Out of service OPRM Oscillation power range monitor PBDA Period based detection algorithm PLUOOS Power load unbalance out of service PCOOS Pressure controller out of service RFWT Reduced feedwater temperature RWE Rod withdrawal error SER Safety evaluation report SLMCPR Safety limit minimum critical power ratio SLO Single loop operation TBVOOS Turbine bypass valves out of service TBV Turbine bypass valve TCV Turbine control valve TIP Traversing incore probe TMOL Thermal mechanical operating limit TSSS Technical Specification scram speed TSV Turbine stop valve Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 6 of 64 1

2. General Information Power and flow dependent limits are listed for various power and flow levels. Linear interpolation is to be used to find intermediate values.

Rated core flow is 98 Mlb/hr. Operation up to 108% rated flow (ICF) is fully evaluated and available for this cycle. Licensed rated thermal power is 2957 MWth. For allowed operating regions, see applicable power/flow map.

The licensing analysis supports full power operation to 15911 MWd/MTU and coastdown to a power level of 70%, given all burnup limits are satisfied. (Reference 3)

Coastdown is defined as any cycle exposure beyond the full power, rated core flow, and all rods out condition with the plant power gradually reducing as available core reactivity diminishes.

The power-dependent OLMCPR, OLMCPR multiplier and MCPR(F) values are independent of scram speed.

LHGRFAC(P) and LHGRFAC(F) values are independent of scram speed and feedwater temperature.

All thermal limits are analyzed to NSS, ISS, and TSSS. Only MCPR operating limits vary with scram speed.

For thermal limit monitoring above 100% rated power or 100% rated core flow, the 100% rated power and the 100% core flow thermal limit values, respectively, shall be used.

Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 7 of 64 1

3. Average Planar Linear Heat Generation Rate For natural uranium lattices, DLO and SLO MAPLHGR values are provided in Table 3-2. For all other lattices, lattice-specific MAPLHGR values for DLO are provided in Tables 3-3 through 3-44. During single loop operation, these limits are multiplied by the SLO multiplier listed in Table 3-1.

Table 3-1 MAPLHGR DLO or SLO multiplier (References 5, 8 and 11)

Table 3-2 MAPLHGR for bundle/lattice:

Opt2-3.93-16GZ8.00-2G6.00 Opt2-4.03-13G8.00 Opt2-4.02-18GZ8.00-14GZ5.50 Opt2-4.03-16GZ8.00-14GZ5.50 Opt2-4.07-14G5.50-2GZ5.50 Opt2-4.04-18GZ7.50-14GZ5.50 Opt2-4.05-16GZ7.50-14GZ5.50 Opt2-4.10-14G5.50-2GZ5.50 Lattices 081 and 089 (References 4, 5, 7 and 10)

Lattice 081: Opt2-BO.71 089: Opt2.TO.71 Average Planar Exposure MAPLHGR (MWd/MTU) IkW/ft) 0 7.50 72000 7.50 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 8 of 64 1 Table 3-3 MAPLHGR for bundlellaffice:

Opt2-3.93-16GZ8.00-2G6.00 Lattice 102 (References 10 and 11)

Lattice 102: Opt2-B4.30-16G8.00-2G6.00 Average Planar Exposure MAPLHGR (MWdlMTU) (k 0 9.59 7500 9.44 17500 9.44 24000 9.69 58000 9.69 70000 8.32 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 9 of 64 1 Table 3-4 MAPLHGR for bundle/lattice:

Opt2-3.93-16GZ8.00-2G6.00 Lattice 103 (References 10 and 11)

Lattice 103: Opt2-B4.31-14G8.00-2G6.00 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.75 7500 9.44 17500 9.44 24000 9.71 58000 9.71 70000 8.34 Table 3-5 MAPLHGR for bundle/lattice:

Opt2-3.93-16GZ8.00-2G6.00 Lattices 104 and 105 (References 10 and 11)

Lattices 104: Opt2-BE4.41-14G8.00-2G6.00 105: Opt2-M4.41-14G8.00-2G6.00 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.84 7500 9.52 17500 9.52 24000 9.84 58000 9.84 70000 8.47 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 10of64 I Table 3-6 MAPLHGR for bundlellattice:

Opt2-3.93-16GZ8.00-2GE.00 Lattices 106, 107, and 108 (References 10 and 11)

Lattice 106: Opt2-ME4.39-14G8.00-:2G6.00 107: Opt2-T4.39-14G8.00-2G6.00 lOB: Ont2-T4.39-16G6.00

..... r2 . 39-16G6......

Average Planar Exposure MAPLHGR (MWd/MTU) (kW/ft) 0 10.01 7500 9.71 17500 9.71 24000 10.14 58000 10.14 70000 8.77 Table 3-7 MAPLHGR for bund~ellaftice:

Opt2-4.03-13G8.00 Lattice 109 (References 10 and 11)

Lattice 109: Opt2-B4.42-13G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) (kW/ft) 0 '10.16 10000 9.69 58000 9.69 70000 8.31 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 11 of 64 1 Table 3-8 MAPLHGR for bundllellattice:

Opt2-4.03-13G8.00 Lattices 110 and 111 (References 10 and 11)

Lattice 110: Opt2-BE4.52-13G8.00 111: Opt2-M4.52-13G8.O0 Average Planar Exposure MAPLHGR (MWd/MTU) kW/ft) 0 10.27 10000 9.80 58000 9.80 70000 8.42 Table 3-9 MAPLHGR for bundle/lattice:

Opt2-4.03-13G8.00 Lattices 112 and 113 (References 10 and 11)

Lattice 112: Opt2-ME4.51-13G8..00 113: Opt2-T4.51-13G8.00 Average Planar Exposure MAPLHGR (MWd/MTU) (Imlft) 0 "10.53 10000 10.04 58000 "10.04 70000 8.67 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 12 of 64 1 Table 3-10 MAPLHGR for bundle/lattice:

Opt2-4.02-18GZ8.00-14GZ5.50 Lattice 114 (References 7 and 8)

Lattice 114: Opt2-B4.43-18G8.00 Average Planar Exposure MAPLHGR (MWd/MTU) (kW/ft) 0 8.67 2500 8.85 5000 8.99 7500 9.07 10000 9.11 12000 9.15 15000 9.32 17000 9.40 20000 9.57 22000 9.71 24000 9.76 30000 9.67 36000 9.62 42000 9.62 50000 9.69 60000 9.67 72000 9.88 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 13 of 64 1 Table 3-11 MAPLHGR for bundle/lattice:

Opt2-4.02-18GZ8.00-14GZ5.50 Lattice 115 (References 7 and 8)

Lattice 116: Oot2-BE4.52-18G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) (kWlf) 0 8.71 2500 8.87 5000 9.03 7500 9.12 10000 9.17 12000 9.22 15000 9.40 17000 9.49 20000 9.67 22000 9.82 24000 9.84 30000 9.75 36000 9.70 42000 9.70 50000 9.74 60000 9.70 72000 9.93 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 14 of 64 1 Table 3-12 MAPLHGR for bundle/lattice:

Opt2-4.02-18GZ8.00-14GZ5.50 Lattice 116 (References 7 and 8)

Lattice 116: Ont2-M4.52-18G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) (kWlf) 0 8.68 2500 8.86 5000 9.01 7500 9.12 10000 9.18 12000 9.23 15000 9.41 17000 9.51 20000 9.69 22000 9.84 24000 9.84 30000 9.74 36000 9.69 42000 9.70 50000 9.72 60000 9.68 72000 9.93 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 15 of 64 1 Table 3-13 MAPLHGR for bundle/lattice:

Opt2-4.02-I8GZ8.00-14GZ5.50 Lattice 117 (References 7 and 8)

Lattice 117: OWt2-ME4.47-18G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) kWlf) 0 8.80 2500 8.99 5000 9.14 7500 9.26 10000 9.30 12000 9.38 15000 9.56 17000 9.69 20000 10.00 22000 10.03 24000 10.02 30000 9.94 36000 9.88 42000 9.89 50000 9.84 60000 9.85 72000 10.19 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 16 of 64 1 Table 3-14 MAPLHGR for bundle/lattice:

Opt2-4.02-18GZ8.00-14GZ5.50 Lattice 118 (References 7 and 8)

Lattice 118: Ont2-T4.47-18G8.00 Average Planar Exposure MAPLHGR (MWd/MTU) (kW/ft) 0 8.85 2500 9.03 5000 9.16 7500 9.23 10000 9.25 12000 9.31 15000 9.50 17000 9.66 20000 '10.02 22000 10.01 24000 10.00 30000 9.92 36000 9.87 42000 9.86 50000 9.80 60000 9.82 72000 "10.19 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 17 of 64 1 Table 3-15 MAPLHGR for bundlle/lattice:

Opt2-4.02-18GZ8.00-14GZ5.50 Lattice 119 (References 7 and 8)

Lattice 119: ODt2-T4.50-14G5.0O Average Planar Exposure MAPLHGR (MWd/MTU) (kW/f 0 9.64 2500 9.77 5000 9.81 7500 9.74 10000 9.67 12000 9.70 15000 10.00 17000 10.14 22000 10.16 22000 10.15 24000 10.13 30000 10.03 36000 9.97 42000 9.95 50000 9.89 60000 9.90 72000 '10.26 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 18 of 64 1 Table 3-16 MAPLHGR for bundle/lattice:

Opt2-4.03-16GZ8.00-14G75.50 Lattice 120 (References 7 and 8)

Lattice 120: Opt2-B4.44-16G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) (kWft 0 8.96 2500 9.11 5000 9.21 7500 9.25 10000 9.25 12000 9.26 15000 9.38 17000 9.44 20000 9.56 22000 9.69 24000 9.78 30000 9.70 36000 9.65 42000 9.66 50000 9.70 60000 9.66 72000 9.89 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 19 of 64 1 Table 3-17 MAPLHGR for bundle/lattice:

Opt2-4.03-16GZ8.00-14GZ5.50 Lattice 121 (References 7 and 8)

Lattice 121: ODt2-BE4.53-16G8.00 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft 0 9.01 2500 9.15 5000 9.26 7500 9.31 10000 9.31 12000 9.34 15000 9.46 17000 9.53 20000 9.66 22000 9.80 24000 9.86 30000 9.79 36000 9.74 42000 9.74 50000 9.75 60000 9.70 72000 9.93 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 20 of 64 1 Table 3-18 MAPLHGR for bundle/lattice:

Opt2-4.03-16GZ8.00-14GZ5.50 Lattice 122 (References 7 and 8)

Lattice 122: Opt2-M4.53-16G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) kWlft) 0 8.99 2500 9.13 5000 9.25 7500 9.32 10000 9.32 12000 9.35 15000 9.47 17000 9.54 20000 9.67 22000 9.81 24000 9.86 30000 9.78 36000 9.73 42000 9.73 50000 9.71 60000 9.68 72000 9.94 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 21 of 64 1 Table 3-19 MAPLHGR for bundle/lattice:

Opt2-4.03-16GZ8.00-14GZ5.50 Lattice 123 (References 7 and 8)

Lattice 123: Opt2-ME4.49-16G8.00 Average Planar Exposure MAPLHGR (MWdlMTU) kWlft) 0 9.14 2500 9.29 5000 9.40 7500 9.48 10000 9.47 12000 9.52 15000 9.63 17000 9.72 20000 9.98 22000 10.05 24000 10.04 30000 9.98 36000 9.92 42000 9.88 50000 9.83 60000 9.84 72000 10.19 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 22 of 64 1 Table 3-20 MAPLHGR for bundile/lattice:

Opt2-4.03-16GZ8.00-14GZ5.50 Lattice 124 (References 7 and 8)

Lattice 124: Opt2-T4.49-16G8.00 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.18 2500 9.33 5000 9.43 7500 9.45 10000 9.42 12000 9.45 15000 9.57 17000 9.69 20000 9.99 22000 10.03 24000 '10.03 30000 9.97 36000 9.91 42000 9.85 50000 9.79 60000 9.81 72000 "10.20 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 23 of 64 1 Table 3-21 MAPLHGR for bundle/lattice:

Opt2-4.07-14G5.50-2GZS.50 Lattice 125 (References 7 and 8)

Lattice 125: Opt2-B4.48-16GS.50 Average Planar Exposure MAPLHGR (MWd/MTU) k 0 8.92 2500 9.08 5000 9.22 7500 9.30 10000 9.33 12000 9.36 15000 9.53 17000 9.68 20000 9.84 22000 9.89 24000 9.87 30000 9.77 36000 9.71 42000 9.71 50000 9.76 60000 9.74 72000 9.94 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 24 of 64 1 Table 3-22 MAPLHGR for bundle/lattice:

Opt2-4.07-14G5.50-2GZ5.50 Lattice 126 (References 7 and 8)

Lattice 126: Opt2-BE4.57-16GS.50 Average Planar Exposure MAPLHGR (MWdlMTU) (Wlft) 0 8.96 2500 9.12 5000 9.28 7500 9.36 10000 9.40 12000 9.44 15000 9.63 17000 9.79 20000 9.96 22000 9.98 24000 9.96 30000 9.86 36000 9.80 42000 9.79 50000 9.84 60000 9.78 72000 9.99 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 25 of 64 1 Table 3-23 MAPLHGR for bundle/lattice:

Opt2-4.07-14G5.50-2GZSr;.50 Lattice 127 (References 7 and 8)

Lattice 127: Oot2-M4.57-16G5.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlf) 0 8.95 2500 9.11 5000 9.27 7500 9.37 10000 9.40 12000 9.45 15000 9.64 17000 9.81 20000 9.97 22000 9.98 24000 9.96 30000 9.86 36000 9.79 42000 9.79 50000 9.81 60000 9.76 72000 9.99 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 26 of 64 1 Table 3-24 MAPLHGR for bundle/lattice:

Opt2-4.07-14G5.50-2GZ6.50 Lattice 128 (References 7 and 8)

Lattice 128: ODt2-ME4.54-16G5.50 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft 0 9.10 2500 9.27 5000 9.43 7500 9.54 10000 9.55 12000 9.63 15000 9.93 17000 10.13 20000 10.20 22000 10.19 24000 10.16 30000 10.06 36000 9.99 42000 9.99 50000 9.96 60000 9.93 72000 10.25 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 27 of 64 1 Table 3-25 MAPLHGR for bundile/lattice:

Opt2-4.07-14G5.50-2GZS.50 Lattice 129 (References 7 and 8)

Lattice 129: Opt2-T4.54-16G5.50 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.14 2500 9.30 5000 9.45 7500 9.49 10000 9.51 12000 9.57 15000 9.93 17000 10.14 20000 '10.19 22000 '10.17 24000 "10.15 30000 '10.05 36000 9.98 42000 9.98 50000 9.92 60000 9.91 72000 10.25 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 28 of 64 1 Table 3-26 MAPLHGR for bundle/lattice:

Opt2-4.07-14G5.50-2GZS.50 Lattice 130 (References 7 and 8)

Lattice 130: Opt2-T4.55-14G5.50 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.50 2500 9.62 5000 9.72 7500 9.70 10000 9.65 12000 9.66 15000 9.94 17000 10.12 20000 10.20 22000 10.19 24000 10.17 30000 10.06 36000 10.00 42000 9.98 50000 9.92 60000 9.91 72000 10.26 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 29 of 64 1 Table 3-27 MAPLHGR for bundle/lattice:

Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 131 (References 4 and 5)

Lattice 131: Oot2-B4.44-18G7.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kW/fl) 0 9.14 2500 9.48 5000 9.48 7500 9.32 10000 9.47 12000 9.47 15000 9.55 17000 9.63 20000 9.85 22000 9.90 24000 9.85 30000 9.80 36000 9.74 42000 9.73 50000 9.78 60000 9.82 72000 9.98 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 30 of 64 1 Table 3-28 MAPLHGR for bundlellattice:

Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 132 (References 4 and 5)

Lattice 132: Opt2-BE4.54-18G7.50 Average Planar Exposure MAPLHGR (MWdlMTU) (kW/ft) 0 9.29 2500 9.57 5000 9.55 7500 9.37 10000 9.53 12000 9.54 15000 9.64 17000 9.74 20000 9.97 22000 '10.00 24000 9.94 30000 9.88 36000 9.85 42000 9.81 50000 9.84 60000 9.85 72000 10.02 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 31 of 64 1 Table 3-29 MAPLHGR for bundle/lattice:

Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 133 (References 4 and 5)

Lattice 133: Opt2-M4.54-18G7.50 Average Planar Exposure MAPLHGR (MWdlMTU) kW/ft) 0 9.27 2500 9.57 5000 9.51 7500 9.39 10000 9.54 12000 9.58 15000 9.67 17000 9.76 20000 9.97 22000 9.99 24000 9.94 30000 9.87 36000 9.84 42000 9.80 50000 9.82 60000 9.83 72000 10.03 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 32 of 64 1 Table 3-30 MAPLHGR for bundle/lattice:

Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 134 (References 4 and 5)

Lattice 134: Opt2-ME4.50-18G7.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.40 2500 9.71 5000 9.66 7500 9.52 10000 9.68 12000 9.69 15000 9.81 17000 9.92 20000 10.18 22000 10.15 24000 10.10 30000 10.05 36000 9.98 42000 9.97 50000 9.90 60000 9.97 72000 10.24 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 33 of 64 1 Table 3-31 MAPLHGR for bundle/lattice:

Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 135 (References 4 and 5)

Lattice 135: Opt2-T4.50-18G7.50 Average Planar Exposure MAPLHGR (MWdlMTU) (kWlft) 0 9.43 2500 9.70 5000 9.59 7500 9.45 10000 9.64 12000 9.65 15000 9.75 17000 9.93 20000 10.26 22000 10.14 24000 10.09 30000 10.05 36000 9.99 42000 9.97 50000 9.88 60000 9.94 72000 10.27 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 34 of 64 1 Table 3-32 MAPLHGR for bundlellattice:

Opt2-4.04-18GZ7.50-14GZ5.50 Lattice 136 (References 4 and 5)

Lattice 136: Opt2-T4.52-14G5.!50 Average Planar Exposure MAPLHGR (MWd/MTU) (kW/ft) 0 10.17 2500 10.40 5000 10.30 7500 10.00 10000 10.05 12000 10.08 15000 10.21 17000 10.25 20000 10.25 22000 10.25 24000 10.21 30000 10.16 36000 10.10 42000 10.03 50000 9.93 60000 9.99 72000 10.27 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 35 of 64 1 Table 3-33 MAPLHGR for bundle/lattice:

Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 137 (References 4 and 5)

Lattice 137: Opt2-B4.45-16G7.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.45 2500 9.73 5000 9.67 7500 9.50 10000 9.61 12000 9.63 15000 9.61 17000 9.66 20000 9.83 22000 9.91 24000 9.87 30000 9.83 36000 9.78 42000 9.77 50000 9.81 60000 9.82 72000 9.98 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 36 of 64 1 Table 3-34 MAPLHGR for bundle/lattice:

Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 138 (References 4 and 5)

Lattice 138: Opt2-BE4.55-16G7.50 Average Planar Exposure MAPLHGR (MWdlMTU) kWlft) 0 9.60 2500 9.85 5000 9.73 7500 9.57 10000 9.67 12000 9.68 15000 9.70 17000 9.76 20000 9.96 22000 10.01 24000 9.97 30000 9.92 36000 9.89 42000 9.84 50000 9.83 60000 9.84 72000 '10.02 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 37 of 64 1 Table 3-35 MAPLHGR for bundlellattice:

Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 139 (References 4 and 5)

Lattice 139: Opt2-M4.55-1 6G7.50 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.59 2500 9.86 5000 9.77 7500 9.60 10000 9.70 12000 9.73 15000 9.73 17000 9.77 20000 9.95 22000 10.01 24000 9.97 30000 9.91 36000 9.88 42000 9.84 50000 9.80 60000 9.82 72000 '10.03 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 38 of 64 1 Table 3-36 MAPLHGR for bundlellattice:

Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 140 (References 4 and 5)

Lattice 140: Opt2-ME4.51-16G7.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.75 2500 10.02 5000 9.90 7500 9.75 10000 9.84 12000 9.85 15000 9.88 17000 9.93 20000 10.18 22000 10.19 24000 10.14 30000 10.09 36000 10.05 42000 10.00 50000 9.90 60000 9.96 72000 10.24 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 39 of 64 1 Table 3-37 MAPLHGR for bundlellattice:

Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 141 (References 4 and 5)

Lattice 141: Opt2-T4.51-16G7.50 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.77 2500 10.01 5000 9.91 7500 9.70 10000 9.80 12000 9.80 15000 9.84 17000 9.93 20000 10.25 22000 10.16 24000 10.14 30000 10.10 36000 10.04 42000 9.96 50000 9.86 60000 9.92 72000 10.27 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 40 of 64 1 Table 3-38 MAPLHGR for bundlellattce:

Opt2-4.05-16GZ7.50-14GZ5.50 Lattice 142 (References 4 and 5)

Lattice 142: Opt2-T4.52-14GS.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 10.17 2500 10.40 5000 10.30 7500 10.00 10000 10.05 12000 10.08 15000 10.21 17000 10.25 20000 10.25 22000 10.25 24000 10.21 30000 10.15 36000 10.11 42000 10.04 50000 9.93 60000 9.99 72000 10.27 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 41 of 64 1 Table 3-39 MAPLHGR for bundlellattice:

Opt2-4.10-14GS.50-2GZS,50 Lattice 143 (References 4 and 5)

Lattice 143: Opt2-B4.50-16G5.150 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.21 2500 9.54 5000 9.51 7500 9.39 10000 9.40 12000 9.47 15000 9.63 17000 9.74 20000 9.93 22000 9.93 24000 9.90 30000 9.84 36000 9.80 42000 9.75 50000 9.79 60000 9.84 72000 9.96 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 42 of 64 1 Table 3-40 MAPLHGR for bundlellattice:

Opt2-4.10-14G5.50-2GZS.50 Lattice 144 (References 4 and 5)

Lattice 144: Opt2-BE4.60-16G5.,50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.26 2500 9.63 5000 9.63 7500 9.57 10000 9.50 12000 9.57 15000 9.75 17000 9.89 20000 10.04 22000 10.06 24000 10.02 30000 9.94 36000 9.90 42000 9.93 50000 9.85 60000 9.85 72000 10.00 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 43 of 64 1 Table 3-41 MAPLHGR for bundle/lattice:

Opt2-4.10-14G5.50-2GZS.50 Lattice 145 (References 4 and 5)

Lattice 145: ODt2-M4.60-16G5.:50 Average Planar Exposure MAPLHGR (MWdlMTU) kWlf!

0 9.25 2500 9.63 5000 9.69 7500 9.59 10000 9.52 12000 9.59 15000 9.76 17000 9.92 20000 10.13 22000 10.06 24000 10.01 30000 9.97 36000 9.91 42000 9.93 50000 9.83 60000 9.84 72000 10.01 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 44 of 64 1 Table 3-42 MAPLHGR for bundle/lattice:

Opt2-4.10-14G5.50-2GZS.50 Lattice 146 (References 4 and 5)

Lattice 146: Opt2-ME4.57-16G5.50 Average Planar Exposure MAPLHGR (MWd/MTU) (kWlft) 0 9.41 2500 9.80 5000 9.82 7500 9.72 10000 9.66 12000 9.76 15000 10.04 17000 10.19 20000 10.34 22000 10.24 24000 10.19 30000 10.13 36000 10.08 42000 10.00 50000 9.95 60000 9.98 72000 10.21 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 45 of 64 1 Table 3-43 MAPLHGR for bundle/lattice:

Opt2-4.10-14GS5.0-2GZS.50 Lattice 147 (References 4 and 5)

Lattice 147: Opt2-T4.57-16G5.50 Average Planar Exposure MAPLHGR (MWd/MTU) kWlft) 0 9.45 2500 9.82 5000 9.83 7500 9.61 10000 9.61 12000 9.71 15000 9.99 17000 10.17 20000 10.23 22000 10.22 24000 10.17 30000 10.12 36000 10.07 42000 10.02 50000 9.91 60000 9.95 72000 '10.26 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 46 of 64 1 Table 3-44 MAPLHGR for bundle/lattice:

Opt2-4.10-14G5.50-2GZ5.50 Lattice 148 (References 4 and 5)

Lattice 148: Ont2-T4.58-14G5,50

..... r tT............

Average Planar Exposure MAPLHGR (MWd/MTU) (kWl__)

0 9.83 2500 10.16 5000 10.23 7500 9.95 10000 9.78 12000 9.81 15000 10.00 17000 10.14 20000 10.23 22000 10.24 24000 10.20 30000 10.15 36000 10.09 42000 10.02 50000 9.90 60000 9.95 72000 10.26 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 47 of 64 1

4. Operating Limit Minimum Critical Power Ratio The Operating Limit Minimum Critical Power Ratios (OLMCPRs) for D3C23 were established to protect the Safety Limit Minimum Critical Power Ratio (SLMCPR) for the abnormal operational occurrences. The SLMCPR values for DLO and SLO were determined to be 1.12 and 1.14, respectively (Reference 12).

In determining the SLMCPR values for D3C23, Westinghouse applied the methodologies from CENPD-300-P-A, consistent with the manner specified in Limitations I through 6 and 8 of the NRC SER approving CENPD-300-P-A (References 12 and 13). The application of these methodologies was previously approved by the NRC in license amendment 213 to Renewed Facility Operating License DPR-25 (Reference 14).

4.1. Manual Flow Control MCPR Limits The OLMCPR is determined for a given power and flow condition by evaluating the power-dependent MCPR and the flow-dependent MCPR and selecting the greater of the two.

4.1.1. Power-Dependent MCPR For operation at less than or equal to 38.5% core thermal power, the power dependent OLMCPR is shown in Tables 4-8 and 4-9. For operation at greater than 38.5% core thermal power, the power dependent OLMCPR is determined by multiplying the applicable rated condition OLMCPR limit shown in Tables 4-2 through 4-7 by the applicable OLMCPR multiplier given in Tables 4-8 and 4-9.

4.1.2. Flow-Dependent MCPR Table 4-10 gives the MCPR(F) limit as a function of the flow based on the applicable plant condition. The MCPR(F) limit determined from this table is the flow dependent OLMCPR. The flow-dependent OLMCPR values are applicable to all base case and EOOS combinations.

Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 48 of 64 1 4.2. Scram Time TSSS, ISS, and NSS refer to scram speeds. The scram time values associated with these speeds are shown in Table 4-1. The TSSS scram times shown in Table 4-1 are the same as those specified in the Technical Specifications (Reference 15). Reference 3 documents that the TSSS control rod insertion times that were actually used in the transient analysis are conservative with respect to the scram times specified in the Technical Specifications.

To utilize the MCPR limits for Nominal Scram Speed, the average control rod insertion time at each control rod insertion fraction must be equal to or less than the NSS time shown on Table 4-1 below.

To utilize the MCPR limits for Intermediate Scram Speed, the average control rod insertion time at each control rod insertion fraction must be equal to or less than the ISS time shown on Table 4-1 below.

To utilize the MCPR limits for Technical Specification Scram Speed, the average control rod insertion time at each control rod insertion fraction must be equal to or less than the TSSS time shown on Table 4-1 below.

The average control rod insertion time is defined as the average control rod insertion time of all operable control rods based on the sum of the most recent scram time data divided by the number of operable drives. The time for inoperable drives fully inserted (notch 00) can be conservatively included for calculation of core average scram speed. (Reference 3)

Table 4-1 Scram Times (References 3 and 15)

Control Rod Insertion Fraction NSS (seconds) ISS (seconds) TSSS (seconds) 5 0.324 0.360 0.48 20 0.700 0.720 0.89 50 1.510 1.580 1.98 90 2.635 2.740 3.44 4.3. Recirculation Pump ASD Settings Cycle 23 was analyzed with a maximum core flow runout of 110% (Reference 16); therefore the recirculation pump ASD must be set to maintain core flow less than 110% (107.8 Mlb/hr) for all runout events. This value is consistent with the analyses bases described in Reference 3.

Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 49 of 64 1 Table 4-2 MCPR TSSS Based Operating Limits - NFWT All Fuel Types (Reference 3)

Cycle Exposure

< 14000 > 14000 EOOS Combination MWd/MTU MWdlMTU BASE 1.70 1.74 BASE SLO 1.74 1.78 PLUOOS 1.73 1.77 PLUOOS SLO 1.77' 1.81 TBVOOS 1.81 1.83 TBVOOS SLO 1.85 1.87 TCV SLOW CLOSURE 1.79 1.83 TCV SLOW CLOSURE SLO 1.83 1.87 TCV STUCK CLOSED 1.70 1.74 TCV STUCK CLOSED SLO 1.74. 1.78 Table 4-3 MCPR TSSS Based Operating Limits - RFWT All Fuel Types (Reference 3)

Cycle Exposure

< 14000 > 14000 EOOS Combination MWd/MTU MWd/MTU BASE 1.70 1.74 BASE SLO 1.74. 1.78 PLUOOS 1.73 1.77 PLUOOS SLO 1.77' 1.81 TBVOOS 1.82 1.84 TBVOOS SLO 1.86 1.88 TCV SLOW CLOSURE 1.79 1.83 TCV SLOW CLOSURE SLO 1.83 1.87 TCV STUCK CLOSED 1.70 1.74 TCV STUCK CLOSED SLO 1.74 1.78 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 50 of 64 1 Table 4-4 MCPR ISS Based Operating Limits - NFWT All Fuel Types (Reference 3)

Cycle Exposure

< 14000 > 14000 EOOS Combination MWd/MTU MWd/MTU BASE 1.45 1.50 BASE SLO 1.48 1.53 PLUOOS 1.52 1.56 PLUOOS SLO 1.55 1.59 TBVOOS 1.57 1.62 TBVOOS SLO 1.60 1.65 TCV SLOW CLOSURE 1.54 1.58 TCV SLOW CLOSURE SLO 1.57 1.61 TCV STUCK CLOSED 1.45 1.50 TCV STUCK CLOSED SLO 1.48 1.53 Table 4-5 MCPR ISS Based Operating Limits - RFWT All Fuel Types (Reference 3)

Cycle Exposure

< 14000 > 14000 EOOS Combination MWd/MTU MWd/MTU BASE 1.51 1.51 BASE SLO 1.54 1.54 PLUOOS 1.52 1.56 PLUOOS SLO 1.55 1.59 TBVOOS 1.62 1.66 TBVOOS SLO 1.65 1.69 TCV SLOW CLOSURE 1.54 1.58 TCV SLOW CLOSURE SLO 1.57 1.61 TCV STUCK CLOSED 1.51 1.51 TCV STUCK CLOSED SLO 1.54 1.54 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 51 of 64 1 Table 4-6 MCPR NSS Based Operating Limits - NFWT All Fuel Types (Reference 3)

Cycle Exposure

<514000 > 14000 EOOS Combination MWd/MTU MWd/MTU BASE 1.45 1.47 BASE SLO 1.483 1.50 PLUOOS 1.5') 1.53 PLUOOS SLO 1.5:3 1.56 TBVOOS 1.55 1.59 TBVOOS SLO 1.58 1.62 TCV SLOW CLOSURE 1.52 1.56 TCV SLOW CLOSURE SLO 1.55 1.59 TCV STUCK CLOSED 1.45 1.47 TCV STUCK CLOSED SLO 1.48 1.50 Table 4-7 MCPR NSS Based Operating Limits - RFWT All Fuel Types (Reference 3)

Cycle Exposure

< 14000 > 14000 EOOS Combination MWdIMTU MWdlMTU BASE 1.50 1.51 BASE SLO 1.53 1.54 PLUOOS 1.50 1.53 PLUOOS SLO 1.53 1.56 TBVOOS 1.60 1.62 TBVOOS SLO 1.63 1.65 TCV SLOW CLOSURE 1.52 1.56 TCV SLOW CLOSURE SLO 1.55 1.59 TCV STUCK CLOSED 1.50 1.51 TCV STUCK CLOSED SLO 1.53 1.54 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 52 of 64 1 Table 4-8 MCPR(P) - NFWT All Fuel Types (Reference 3)

Core Thermal Power (% of rated)

EOOS Combination Core Flow (% of rated) 0 1 25 1 <38.5 >38.5 I 50 60 I 80 100 Operating Limit MCPRJ[Operating Limit MCPR Multiplier Base < 60 3.05 2.45 2.13 1.33 1.20 1.13 1.06 1.00

> 60 3.20 2.71 2.45

_<60 3.11 2.50 2.17 Base SLO 1.33 1.20 1.13 1.06 1.00

> 60 3.26 2.76 2.50

_<60 3.05 2.45 2.13 PLUOOS 1.57 1.46 1.29 1.06 1.00

> 60 3.20 2.71 2.45

<60 3.11 2.50 2.17 PLUOOS SLO 1.57 1.46 1.29 1.06 1.00

> 60 3.26 2.76 2.50

_<60 4.44 3.16 2.47 TBVOOS 1.33 1.20 1.13 1.06 1.00

> 60 4.34 3.39 2.88

< 60 4.52 3.22 2.52 TBVOOS SLO 1.33 1.20 1.13 1.06 1.00

> 60 4.42 3.46 2.94

_<60 3.05 2.45 2.13 TCV Slow Closure 1.57 1.46 1.29 1.06 1.00

> 60 3.20 2.71 2.45

_<60 3.11 2.50 2.17 TCV Slow Closure SLO 1.57 1.46 1.29 1.06 1.00

> 60 3.26 2.76 2.50

_<60 3.05 2.45 2.13 TCV Stuck Closed 1.33 1.20 1.13 1.06 1.00

> 60 3.20 2.71 2.45

<60 3.11 2.50 2.17 TCV Stuck Closed SLO > 60 3.26 2.76 2.50 1.33 1.20 1.13 1.06 1.00 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 53 of 64 1 Table 4-9 MCPR(P) - RFWT All Fuel Types (Reference 3)

Core Thermal Power (% of rated)

EOOS Combination Core Flow (% of rated) 0 225 38.5 >38.5 1 50 I 60 I 80 1100 Operating Limit MCPR Operating Limit MCPR Multiplier

< 60 3.05 2.45 2.13 Base 1.38 1.23 1.16 1.06 1.00

> 60 3.20 2.71 2.45

<60 3.11 2.50 2.17 Base SLO 1.38 1.23 1.16 1.06 1.00

> 60 3.26 2.76 2.50

<60 3.05 2.45 2.13 PLUOOS 1.57 1.46 1.29 1.06 1.00

> 60 3.20 2.71 2.45

<60 3.11 2.50 2.17 PLUOOS SLO 1.57 1.46 1.29 1.06 1.00

> 60 3.26 2.76 2.50

< 60 4.75 3.34 2.58 TBVOOS < 60 4.34 3.4 2.96 1.38 1.23 1.16 1.06 1.00

> 60 4.34 3.40 2.96 TBVOOS SLO 1.38 1.23 1.16 1.06 1.00

> 60 4.42 3.47 3.02 1_1__

<60 3.05 2.45 2.13 TCV Slow Closure 1.57 1.46 1.29 1.06 1.00

> 60 3.20 2.71 2.45

<60 3.11 2.50 2.17 TCV Slow Closure SLO

_______ _> 60 3.26 2.76 2.50 1.57 1.46 1.29 1.06 1.00

< 60 3.05 2.45 2.13 TCV Stuck Closed < 1.38 1.23 1.16 1.06 1.00

> 60 3.20 2.71 2.45 1

<60 3.11 2.50 2.17 TCV Stuck Closed SLO 1.38 1.23 1.16 1.06 1.00

> 60 3.26 2.76 2.50 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 54 of 64 1 Table 4-10 MCPR(F)

All Fuel Types (Reference 3)

Flow DLO SLO

(% of 98 MIb/hr) MCPR(F) MCPR(F) 0 1.98 2.02 100 1.38 1.41 108 1.38 1.41 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 55 of 64 1

5. Linear Heat Generation Rate The thermal mechanical operating limit (TMOL) at rated conditions is established in terms of the maximum LHGR given in Table 5-1 and Table 5-2 as a function of rod nodal (pellet) exposure. The Table 5-1 limits apply to Optima2 bundle designs for the Cycle 21 and Cycle 22 reloads and natural Uranium lattices in Cycle 23 bundle designs. The Table 5-2 limits apply to enriched lattices in Optima2 bundle designs for the Cycle 23 reload (Reference 23).

The linear heat generation rate (LHGR) limit is the product of the exposure dependent LHGR limit from Table 5-1 or Table 5-2 as appropriate and the minimum of: the power dependent LHGR Factor, LHGRFAC(P) and the flow dependent LHGR Factor, LHGRFAC(F). The LHGRFAC(P) is determined from Table 5-3. The LHGRFAC(F) is determined from Table 5-4, and is applicable for DLO and SLO and for all Base Case and EOOS conditions.

Table 5-1 LHGR Limit for bundlellattice:

Opt2-3.93-16GZ8.00-2G6.00/AII Lattices Opt2-4.03-13G8.00/AII Lattices Opt2-4.02-18GZ8.00-14GZ5.501AI Lattices Opt2-4.03-16GZ8.00-14GZ5.501A1I Lattices Opt2-4.07-14G5.50-2GZ5.50/AII Lattices Opt2-4.04-18GZ7.50-14GZ6.501Lattices 81 and 89 Opt2-4.05-16GZ7.50-14GZ5.5OILaftices 81 and 89 Opt2-4.10-14G5.50-2GZ5.5OILattices 81 and 89 (References 3, 4, 6, 7, 9, 10, and 23)

Rod Nodal Exposure LHGR Limit for U0 2 Rods (GWdlMTU) (kWlft) 0.00 13.11 14.00 13.11 72.00 6.48 Table 5-2 LHGR Limit for bundlellattice:

Opt2-4.04-18GZ7.50-14GZS.501Lattices 131,132, 133, 134,135, and 136 Opt2-4.05-16GZ7.50-14GZ6.501Lattices 137, 138, 139, 140, 141, and 142 Opt2-4.10-14GS.50-2GZ5.50/Lattices 143, 144, 145, 146, 147, and 148 (References 3, 4, and 23)

Rod Nodal Exposure LHGR Limit for U0 2 Rods LHGR Limit for Gadolinia Rods (GWd/MTU) (kW/ft) (kW/ft) 0.00 13.11 11.43 14.00 13.11 11.43 23.00 12.07 10.52 57.00 8.18 8.18 72.00 6.48 6.48 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 56 of 64 I Table 5-3 LHGRFAC(P) Multipliers All Fuel Types (Reference 3)

Core Thermal Power (% of rated)

EOOS Combination 0 25 <38.5 > 38.5 50 60 80 100 Base 0.50 0.63 0.70 0.74 0.80 0.83 0.90 1.00 Base SLO 0.50 0.63 0.70 0.74 0.80 0.83 0.90 1.00 PLUOOS 0.50 0.63 0.70 0.70 0.74 0.82 0.90 1.00 PLUOOS SLO 0.50 0.63 0.70 0.70 0.74 0.82 0.90 1.00 TBVOOS 0.32 0.45 0.52 0.71 0.76 0.80 0.82 1.00 TBVOOS SLO 0.32 0.45 0.52 0.71 0.76 0.80 0.82 1.00 TCV Slow Closure 0.50 0.63 0.70 0.70 0.74 0.82 0.90 1.00 TCV Slow Closure SLO 0.50 0.63 0.70 0.70 0.74 0.82 0.90 1.00 TCV Stuck Closed 0.50 0.63 0.70 0.74 0.80 0.83 0.90 1.00 TCV Stuck Closed SLO 0.50 0.63 0.70 0.74 0.80 0.83 0.90 1.00 Table 5-4 LHGRFAC(F) Multipliers All Fuel Types (Reference 3)

II SC ni oFlow EOOS Condition

(% of 98 Mlb/hr) 0 20 1 40 60 80 100 108 Base Case and all EOOS Conditions 0.27 0.43 0.60 0.80 1.00 1.00 1.00 Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 57 of 64 1

6. Control Rod Block Setpoints The Rod Block Monitor Upscale Instrumentation Setpoints are determined from the relationships shown below:

Table 6-1 Rod Block Monitor Upscale Instrumentation Setpoints (Reference 17)

ROD BLOCK MONITOR UPSCALE TRIP FUNCTION ALLOWABLE VALUE Two Recirculation Loop 0.65 Wd + 55%

Operation Single Recirculation Loop 0.65 Wd + 51%

Operation II The setpoint may be lower/higher and will still comply with the RWE analysis because RWE is analyzed unblocked (Reference 20).

Wd - percent of recirculation loop drive flow required to produce a rated core flow of 98.0 Mlb/hr.

Dresden Unit 3 Cycle 2:3

COLR Dresden 3 Revision 10 Page 58 of 64 1

7. Stability Protection Setpoints The OPRM PBDA Trip Settings are provided in Table 7-1.

Table 7-1 OPRM PBDA Trip Settings (Reference 3)

Corresponding Maximum PBDA Trip Amplitude Setpoint (Sp) Confirmation Count Setpoint (Np) 1.15 16 The PBDA is the only OPRM setting credited in the safety analysis as documented in the licensing basis for the OPRM system.

The OPRM PBDA trip settings are based, in part, on the cycle specific OLMCPR and the power dependent MCPR limits. Any change to the OLMCPR values and/or the power dependent MCPR limits should be evaluated for potential impact on the OPRM PBDA trip settings.

The OPRM PBDA trip settings are applicable when the OPRM system is declared operable, and the associated Technical Specifications are implemented.

Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 59 of 64 1

8. Modes of Operation The allowed modes of operation with combinations of equipment out-of-service are as described below:

Table 8-1 Modes of Operation (Reference 3)

EOOS Options Thermal Limit Sets Base Base (DLO or SLO)

PLUOOS PLUOOS (DLO or SLO)

TBVOOS TBVOOS (DLO or SLO)

> See Table 8-2 for power restrictions TCV Slow Closure TCV Slow Closure (DLO or SLO)

TCV Stuck Closed (DLO or SLO)

TCV Stuck Closed* > Not applicable to combination of one TCV and one TSV Stuck Closed in separate lines

> See Table 8-2 for power restrictions TCV Stuck Closed (DLO or SLO)

TSV Stuck Closed* > Not applicable to combination of one TCV and one TSV Stuck Closed in separate lines

> See Table 8-2 for power restrictions PCOOS PLUOOS (OLO or SLO)

PCOOS and PLUOOS PLUOOS (DLO or SLO)

PCOOS and TCV Slow Closure TCV Slow Closure (DLO or SLO)

PLUOOS (OLO or SLO)

PCOOS and TCV Stuck Closed* > Not applicable to combination of one TCV and one TSV Stuck Closed in separate lines

> See Table 8-2 for power restrictions PLUOOS (DLO or SLO) a S Not applicable to combination of one TCV and one TSV Stuck Closed in separate lines

>, See Table 8-2 for power restrictions PLUOOS (DLO or SLO)

Oa Not applicable to combination of one TCV and one TSV Stuck Closed in separate lines

> See Table 8-2 for power restrictions PLUOOS (DLO or SLO)

P Not applicable to combination of one TCV and one TSV Stuck Closed in separate lines

> See Table 8-2 for power restrictions

  • Also applicable to one TCV and one TSV stuck closed in the same line.

Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 60 of 64 1 Common Notes - Applicable to both Base Case and all EOOS Combinations for DLO/SLO:

1. All modes are allowed for operation at MELLLA, ICF (up to 108% rated core flow), and coastdown subject to the power restrictions in Table 8-2. Either EOC must be reached or coastdown must begin prior to exceeding 15911 MWd/MTU. The licensing analysis remains valid down to a coastdown power level of 70% given all burnup limits are satisfied per Methodology 7. Each OOS Option may be combined with each of the following conditions provided the requirements of References 18 and 19 are met:

" A maximum of 18 TIP channels OOS (Up to 2 common TIP channels may be OOS, in combination with a maximum of 16 TIP channels OOS in locations outside of the common TIP channel location of 32-33).

" Up to 50% LPRMs OOS

  • An LPRM calibration frequency of up to 2500 EFPH (2000 EFPH + 25%)
2. Nominal FWT results are valid for application within a +100 F1-30OF temperature band around the nominal FWT curve (Reference 20) and within the operating steam dome pressure region (Reference 20). The FWTR results are valid for the minimum FWT curve (Reference 20). For operation outside of NFWT, a FWTR of between 30F and 120F is supported for Base Case and all EOOS DLO/SLO conditions for cycle operation through EOC subject to the restriction in Reference 21 for feedwater temperature reductions of greater than 100 OF. The restriction requires that for a FWT reduction greater than 10OF, operation needs to be restricted to less than the 100% load line.
3. All analyses support the fastest Turbine Bypass Valve (assumed to be #1) OOS, with the remaining 8 TBVs meeting the assumed opening profile in Reference 22. The analyses also support Turbine Bypass flow of 29.8% of vessel rated steam flow, equivalent to one TBV OOS (or partially closed TBVs equivalent to one closed TBV), if the assumed opening profile for the remaining TBVs is met. If the opening profile is NOT met, or if the TBV system cannot pass an equivalent of 29.8% of vessel rated steam flow, utilize the TBVOOS condition.
4. For all cases analyzed including TBVOOS, equivalent of 2 of the first 3.6 TBVs must be capable of opening via the pressure control system while Turbine Bypass Valves #5-9 are allowed to be OOS.

For all cases except TBVOOS, the equivalent of 8 of 9 Turbine Bypass Valves (as stated in Note 3 above) are required to trip open on TCV fast closure or on TSV closure. The TBVOOS condition assumes that all of the TBVs do not trip open on TCV fast closure or on TSV closure.

5. A single MSIV may be taken OOS (shut) under any of the specified OOS options as long as core thermal power is maintained < 75% of 2957 MWth (Reference 3).

Table 8-2 Core Thermal Power Restriction for OOS Conditions (Reference 3)

EOOS Condition Core Thermal Power (% of Rated Power)

Base, PLUOOS, TCV Slow Closure < 100 One TCV Stuck Closed *< 75**

TBVOOS See Table 8-3

  • Also applicable to one TSV stuck closed or one TCV and TSV stuck closed in the same line (Reference 3).
    • Operation above 75% rated power is included as part of the reload analysis. However, operation above 75% power may require raising the MCFL setpoint to increase the available total reactor vessel steam flow capability. Information regarding the steam flow capability necessary to satisfy the reload analysis for operation above 75% power is reported in Reference 3.

Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 61 of 64 1 Table 8-3 Core Thermal Power Restriction for TBVOOS (Reference 3)

Number of Safety Valves Core Thermal Power Available Cycle Exposure (MWdIMTU) Restriction (% of Rated Power) 9 of 9 Entire Cycle < 100 8 of 9 < 14000 < 100 8 of 9 > 14000 < 97 Dresden Unit 3 Cycle 23

COLR Dresden 3 Revision 10 Page 62 of 64 1

9. Methodology The analytical methods used to determine the core operating limits shall be those previously reviewed and approved by the NRC, specifically those described in the following documents:
1. Commonwealth Edison Company Topical Report NFSR-0091, "Benchmark of CASMO/MICROBURN BWR Nuclear Design Methods," Revision 0 and Supplements on Neutronics Licensing Analysis (Supplement 1) and La Salle County Unit 2 benchmarking (Supplement 2), December 1991, March 1992, and May 1992, respectively.
2. NEDE-2401 1-P-A-15 (Revision 15), "General Electric Standard Application for Reactor Fuel (GESTAR)," September 2005.
3. NEDO-32465-A, "Reactor Stability Detect and Suppress Solutions Licensing Basis Methodology for Reload Applications," August 1996.
4. Westinghouse Topical Report CENPD-300-P-A, "Reference Safety Report for Boiling Water Reactor Reload Fuel," July 1996.
5. Westinghouse Report WCAP-1 6081-P-A, "10x1 0 SVEA Fuel Critical Power Experiments and CPR Correlation: SVEA-96 Optima2," March 2005.
6. Westinghouse Report WCAP-1 5682-P-A, "Westinghouse BWR ECCS Evaluation Model: Supplement 2 to Code Description, Qualification and Application," April 2003.
7. Westinghouse Report WCAP-1 6078-P-A, "Westinghouse BWR ECCS Evaluation Model: Supplement 3 to Code Description, Qualification and Application to SVEA-96 Optima2 Fuel," November 2004.
8. Westinghouse Topical Report WCAP-1 5836-P-A, "Fuel Rod Design Methods for Boiling Water Reactors - Supplement 1," April 2006.
9. Westinghouse Topical Report WCAP-1 5942-P-A, "Fuel Assembly Mechanical Design Methodology for Boiling Water Reactors Supplement 1 to CENP-287rP-A," March 2006.
10. Westinghouse Topical Report CENPD-390-P-A, "The Advanced PHOENIX and POLCA Codes for Nuclear Design of Boiling Water Reactors," December 2000.
11. Westinghouse Report WCAP-16081-P-A, Addendum 1-A, Revision 0, "SVEA-96 Optima2 CPR Correlation (D4): High and Low Flow Applications," March 2009.
12. Westinghouse Report WCAP-16081-P-A, Addendum 2-A, Revision 0, "SVEA-96 Optima2 CPR Correlation (D4): Modified R-factors for Part-Length Rods," February 2009.

Dresden Unit 3 Cycle 2.3

COLR Dresden 3 Revision 10 Page 63 of 64 1

10. References
1. Exelon Generation Company, LLC, Docket No. 50-249, Dresden Nuclear Power Station, Unit 3, Facility Operating License, License No. DPR-25.
2. NRC Letter from D. M. Crutchfield to All Power Reactor Licensees and Applicants, Generic Letter 88-16; "Removal of Cycle-Specific Parameter Limits from Technical Specifications," October 3, 1988.
3. Westinghouse Report NF-BEX-12-108, "Dresden Nuclear Power Station Unit 3 Cycle 23 Reload Licensing Report", October 2012, Attachment to Westinghouse Letter NF-BEX-12-138, Rev. 0, "Transmittal of NF-BEX-12-108 Revision 0, 'Dresden Nuclear Power Station Unit 3 Cycle 23 Reload Licensing Report"', October 2, 2012. (Available in EDMS)
4. Westinghouse Letter NF-BEX-12-66 "Bundle Design Report for Dresden 3 Cycle 23", April 11, 2012. (Available in EDMS)
5. Westinghouse Report NF-BEX-12-100-NP Revision 0, "Dresden Nuclear Power Station Unit 3 Cycle 23 MAPLHGR Report", September 2012, Attachment to Westinghouse Letter NF-BEX 132, Rev. 0, "Dresden Nuclear Power Station Unit 3 Cycle 23 MAPLHGR Report Transmittal,"

September 20, 2012. (Available in EDMS)

6. Exelon TODI ES1000014 Rev. 2, "Dresden Unit 3 Cycle 22 Reload Licensing Report (RLR)

Revision 2," August 30, 2011. (Attachment 8 to FCP 382312)

7. Westinghouse Letter NF-BEX-10-57 "Transmittal of Bundle Design Report for Dresden 3 Cycle 22," April 23, 2010. (Attachment 3 to FCP 377653)
8. Westinghouse Report NF-BEX-10-80-NP Revision 0, "Dresden Nuclear Power Station Unit 3 Cycle 22 MAPLHGR Report", August 2010, Attachment to Westinghouse Letter NF-BEX-10-110 Revision 0, "Dresden Nuclear Power Station Unit 3 Cycle 22 MAPLHGR Report Transmittal,"

September 2, 2010. (Attachment 14 to FCP 377653)

9. Exelon TODI, ES0800030, Revision 1, "Dresden Unit 3 Cycle 21 Reload Licensing Report (RLR)," December 15, 2009. (Attachment 38 to FCP 37:3142)
10. Westinghouse Letter NF-BEX-08-61 Revision 1, "Final Report for Dresden Unit 3 Cycle 21 Bundle Designs Revision 1," October 30, 2008. (Attachment 29 to FCP 368721)
11. Westinghouse Letter NF-BEX-08-94-NP, Revision 0, "Dresden Unit 3 Cycle 21 MAPLHGR Report," September 4, 2008. (Attachment 20 to FCP 368721)
12. Westinghouse Letter NF-BEX-12-82, "Transmittal of Safety Limit MCPR for Dresden Unit 3 Cycle 23," June 1,2012. (Available in EDMS)
13. Exelon Letter RS-05-078, "Request for Licensing Amendment Regarding Transition to Westinghouse Fuel," Patrick R. Simpson to U.S. Nuclear Regulatory Commission, June 15, 2005.

(Available in EDMS)

14. NRC Letter, "Dresden Nuclear Power Station, Unit 3 -- Issuance of Amendment RE: Minimum Critical Power Ratio Safety Limit (TAC No. MD2706)," John Honcharik (NRC) to Christopher M.

Crane, November 7, 2006. (Available in EDMS)

15. Exelon Technical Specifications for Dresden 2 and 3, Table 3.1.4-1, "Control Rod Scram Times."

Dresden Unit 3 Cycle 2.5

COLR Dresden 3 Revision 10 Page 64 of 64 1

16. Exelon TODI ES1200005, Revision 0, "Dresden Unit 3 Cycle 23 Licensing Generic Inputs Report," March 15, 2012. (Available in EDMS)
17. Exelon Design Analysis GE DRF C51-00217-01, "Instrument Setpoint Calculation Nuclear Instrumentation Rod Block Monitor Dresden 2 & 3," July 30, 2012.
18. Westinghouse Document BTD 09-0311, Revision 1, "Westinghouse CMS - Operation guidelines for Dresden and Quad Cities plants," July 20, 2009. (Attachment 34 to FCP 368557)
19. Westinghouse Document BTD 09-0723, Revision 0, "Westinghouse CMS - Core Monitoring Strategy for Dresden 3 Cycle 21," July 3, 2009. (Attachment 35 to FCP 368557)
20. Westinghouse Report NF-BEX-12-107, "Dresden Nuclear Power Station Unit 3 Cycle 23 Reload Engineering Report", September 2012, Attachment to Westinghouse Letter NF-BEX-12-134, Rev.

0, "Transmittal of NF-BEX-12-107 Revision 0, 'Dresden Nuclear Power Station Unit 3 Cycle 23 Reload Engineering Report'," September 24, 2012. (Available in EDMS)

21. Exelon Letter, NF:MW:02-0081, "Approval of GE Evaluation of Dresden and Quad Cities Extended Final Feedwater Temperature Reduction," Carlos de la Hoz to Doug Wise and Alex Misak, August 27, 2002. (Available in EDMS)
22. Exelon TODI Ops Ltr 12-12, Revision 0, "OPL-W Parameters for Dresden Unit 3 Cycle 23 Transient Analysis," March 1, 2012. (Available in EDMS)
23. Westinghouse Letter NF-BEX-12-153 "Dresden Unit 3 Cycle 23 Reload Licensing Report Clarification", 10/16/12. (Available in EDMS)

Dresden Unit 3 Cycle 23

Retrieved from "https://kanterella.com/w/index.php?title=SVPLTR_14-0009,_Core_Operating_Report_for_Cycle_23&oldid=2453822"