ML24323A248
| ML24323A248 | |
| Person / Time | |
|---|---|
| Site: | Diablo Canyon  |
| Issue date: | 11/18/2024 |
| From: | Pacific Gas & Electric Co |
| To: | Office of Nuclear Reactor Regulation |
| Shared Package | |
| ML24323A239 | List: |
| References | |
| DCL-24-105 | |
| Download: ML24323A248 (1) | |
Text
C E
D B
A E
D C
B A
130 131 132 133 134 135 136 137 138 139 417D-A 32 S2-4609-1 S2-4607-1 S2-4590-1 S2-4612-1 11/2" OD, 0.065" TK.
NON-SPEC SS TUBING E-4941-2 37B-C SUMP 1-1 TURB.
BLDG.
34-D 3"
S2-4521-3 232B-E 33 S2-4523-3 S2-4522-3
-4 E-4617 5951-11/2 130-B 132-B 207-C 131-D 3/4" ROSP1 ROSP2 47-D 44-D S2 S S2-3/4 0-2025 50B-D 14 S-3/4 57B-C 14 0-1433 0-1169 361B PI 361A PI 145 RV MAKE-UP WATER SYSTEM 0-2027 0-2026 S-3/4 0-1109 361 PCV K-4603-4 09-19-2023 09-19-2023 N/A 0
102016-13-0.dgn 102016-13-0.dgn ZNS4 1 Size ZNS4 NOT REQUIRED PER CF3.ID5 102016 13 85 UNIT 1 & 2 184-B 85 1
27 35B-E S2-4609-1 75 STR Revised Per DFT-7*5976 TRENCH PIPE W.H.A.T.
FROM FXC2 DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
C E
D B
A E
D C
B A
160 161 162 163 164 165 166 167 168 169 S2-387-4 K-2780-4 S2-5208-4 S2 E E-5851-6 E
S10 S10-5867-4 S10 K S10-5866-6 K4 K-2780-4 K-2825-6 3
12 9
K-2380-8 8
11 37-E 7
1" 4
K-5397-1 40-B K-2825-6 K-2569-1 K-2124-4 231-E K-2568-1 K-2120-4 411G-E 32 C
K-2123-4 K-4241-2 80-D 80-D K-4378-3 K-4378-3 S K 40-A C E K-2894-4 2-2127-4 K-385-4 K-3830-3 K-2123-3 35-D K-3833-3 K-383-4 K-1770-1 39-D S2-2127-4 S2 K K-3660-3/4 E
C K-3181-4 K-2829-4 K-1434-6 K-386-4 K-384-4 K-2122-4 K-1906-4 K-1917-4 K-2126-2 K-1403-4 (U2)
K-2770-2 K-2779-4 K-1861-4 K-7010-4 C
E S2-5197-3 S2-5197-3 S2-5196-3 S1-11/2 S1 31-C 41-B S2 S2 K
K-4241-2 NOTE 1 16 9
14 2
7 10 4
3 11 12 15 1
6 K-567-2 K-5020-2 234A-A K-2741-4 K-721-2 K-721-12 K-1903-14 S2-4551-2 K
S2 S2 K
41-C S2 K
K-380-10 232A-A K-382-4 K-1403-4 RECIRC 5
K-1900-4 4120-1 K-K-1420-4 232-E 183-E 37-E 166-C 37-E 144E-B 2"
C E
11/2" S1 S2 S1 S2 1"
1-963 1-672 S2 K
K17-1 C 3/4" CST1 12" K-1/2 K17-1 C 1-1938 K-2124-4 E
K S2 E
3/4" K-3599-2 3/4" 40A-A 40A-A K-3/4 48-D 03 40-D TRANSFER TANK 0-1 DEOXY UNIT RENTAL DEMIN UNIT 2 UNIT 1 SYSTEM INTERM SAMPLE OPEN RESV RAW WTR EDUCTOR MIX PUMP HYDRAZINE CST 1-1 300,000 GAL.
(INNER)
TANK 0-1 FIRE WATER E
S2 3"
3" 3"
3" MAKE-UP WATER SYSTEM 11/2" 11/2" 0-2022 D
S-1/2 C
E C
C E
E E
E E
C C
E E
C E
C C
E E
C E
K-4 K-3 0-2024 D
S-1/2 K-220-4 162-B K-3/4 K
S S-?
S-?
1759 694 697 NOTE 3 1
425,000 GAL 1-1 STORAGE TANK CONDENSATE 150,000 GAL (OUTER)
SAMPLE LOCAL SINK SAMPLE TO 302-C 300-C STORAGE TANK CONDENSATE UNIT 2 PUMP 1-1 SUPPLY AFW BEARING ALTERNATE STORAGE TANK CONDENSATE UNIT 2 SYSTEM CLEAN-UP BLOWDOWN STM GEN TRANSFER PPs MAKE-UP WTR BLDG SUMP TO AUX MISC SOURCES SURGE TK & OTHER U1 SFP AND CCW AUX BLDG EL. 100' SMPL SINK OUTLET HDR TO/FROM DEMINS C
K NOTE 4
PRIOR TO CLOSING.
DEVICE WHICH MUST BE REMOVED 5.VALVE 1-671 HAS A LOCKING EMBEDDED.
IS CAPPED AND BOTH ARE ABANDONED PIPE, LINE K-382-4,
- 4. NOZZLE N3 IS PLUGGED AND IS CAPPED INSIDE TANK.
- 3. NOZZLE N1 (TRANSFER TANK)
IS PLUGGED INSIDE TANK.
- 2. NOZZLE N12 (TRANSFER TANK)
INSIDE TK.
- 1. PENS 9 & 12 ARE PLUGGED NOTES:
NOTE 5 1-2239 V
13 1-679 K16-4575-1 1-979 K
K16 E
C HOOKUP PORT PP 4
2
& EDUCTOR U-1 TKS CHEM ADD N H &
MAKE-UP WTR TO 2 4 TKS & EDUCTOR CHEM ADD U-2 N H &
32 418G-E BLDG AUX INSIDE BLDG AUX OUTSIDE BLDG AUX INSIDE BLDG AUX OUTSIDE NOTE 2 OPEN RESV RAW WTR TO LT-40 SAMPLE RECIRC HDR AUX FW PP 98 1
FLEXIBLE MEMBRANE REPAIR SHELL REF 60158182 11-15-2023 11-15-2023 N/A 0
102016-16-0.dgn 102016-16-0.dgn ZNS4 1 Size ZNS4 NOT REQUIRED PER CF3.ID5 Revised Per DDT-4*2372 102016 16 98 UNIT 1 TMOD PER 60158181 FXC2 DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
C E
D B
A E
D C
B A
210 211 212 213 214 215 216 217 218 219 2"
3/4" ROOM CONTROL CHILLER AUX BLDG CONTROL ROOM ROOF WATER PLANT IONICS DRINKING IONICS GAL TK 20,000 POST LOCA VAULT
- DENOTES CHEMISTRY VALVE SAMPLE FLOOR STATION COMFORT TO 140' D
OPERATIONS COMFORT STA.
HOT WATER HEATER ELEC.
HEATER HOSE CONN.
SINK HOT WATER MINI-ACCESS CONTROL HOT WATER HEATER 85' ELEV.
ELEC.
HEATER MACHINE SHOP FOOD & PARTS SINK SINK WELDING SHOP SINK SINK UNIT 2 READY ROOM DOMESTIC WTR.
DRINKING WTR.
IN SLAB DOMESTIC DRINKING WTR TO I & C AND COMM. BLDG.
SAMPLE BY 0-2 PKG. BLR.
TO TEMP.
COMFORT STA. AT WHSE.
HOSE CONN.
VAC.
BKR.
BKR.
VAC.
FROM 18,000 GAL DRINKING WTR SURGE TK UNIT 1 SHOP 140' ELEV.
DIV. INST.
WATER TO BUILDING SERVICES DRINKING WATER HOT WATER DOMESTIC WATER MAIN D
D D
TO FHB U-1 DOMESTIC WTR TO FUTURE EYEWASH PKG BLR 0-2 NOTE 1 NOTES:
VALVE LOCATED UNDER COVER PLATE BELOW GROUND LEVEL V
SCUPPER ACCESS CHILLER TURB DECK SERVICE WTR 140' 52-12I-06 52-PLAAC-06 TO TSC TRAPS BUTTRESS AREA 0-BFP-14 0-1281 1-1296 0-BFP-16 0-1284 0-1920 0-1320 0-1319 0-1283 0-BFP-9 0-1345 0-1343 0-1921 0-1334 0-1892 0-1865 0-1835 V
0-1268 0-1893 0-1271 0-1273 0-1842 0-1282 0-1998 0-1959 0-1880 V
23 123-D 23 150-D 19 50C-A 89-C HOT MACHINE SHOP 140' ELEV.
DOMESTIC & DRINKING WATER SYSTEM 0-1924 0-1305 0-1326 0-1321 2-1958 2-1877 2-1962 1-1417 1-1990 1-1813 1-1812 2-1879 2-1331 2-1957 1-1867 0-1302 2-1303 0-1304 0-1335 0-1274 1-1279 0-1306 0-1328 0-1276 1-1485 HOSE BIBS BUTTRESS ROOF U-1 1-2032 TO UTILITY SINK 0-1843 0-1765 0-1844 1-2028 2-2030 2-2033 CHEM LAB, BATHROOMS, AND CONTROL ROOM 1-2037 2-2041 2-2039 2-2042 2-2038 1-2034 1-2036 2-2040 1
2-SHOWER-AUX-100-1-2046 2112 PI 1-2112 1-2111 1-2110 2111 PI 1-2047 WB-104-1 1-ESCOMBO-1-ESCOMBO-WB-85-3 ESCOMBO-WB-85-3 2-2095 2-2097 2113 PI H2-115-1 1-ESCOMBO-2-2096 2-2052 LAB SINKS TO CHEM
-FHB-115-1 ESCOMBO 1-1-2202 2202 PI
-AUX-100-1 ESCOMBO 1-1-2204 2204 PI 2205 PI 2-2205
-FHB-100-1 ESCOMBO 2-2206 PI 2-2206
-FHB-115-1 ESCOMBO 2-2203 PI 2-2203 2-ESCOMBO-WB-85-1 2-2235 2195 PI 2-2195 2199 PI 2-2199 2197 PI 1-2197 1-2198 2198 PI 2196 PI 0-2201 2201 PI 0-2209 2200 PI 1-2200 2-ESCOMBO-AUX-115-1 2-2090 2-2089 2-2091 2091 PI 19 56A-A 2081 PI 0-2081 0-2084 PI 2084 0-2082 0-2079 0-2083 0-2080
-MS-85-1 0-ESCOMBO
-WB-85-1 0-ESCOMBO 2094 PI 1-2094 1-2092 1-2093 1-ESCOMBO-FHB-100-1 2-EYE-BAT21-115-1 2-EYE-BAT22-115-1 2-EYE-BAT23-115-1 1-EYE-BAT13-115-1 1-EYE-BAT12-115-1 1-EYE-BAT11-115-1 2085 PI 0-2085 1-2086 1-2087 1-2088 2-2086 2-2087 2-2088 SINK POST LOCA A/C POST LOCA RADWASTE FACILITY TO LAUNDRY/
RECIRC PP HOT RECIRC 211A-E SCUPPER 2-4638 UNIT 2 23 137-B UNIT 1 23 137-B SCUPPER 1-4638 0-1925 1-2044 1-2045 1-2180 2180 PI WB-85-4 1-ESCOMBO-2-2184 1-2055 1-ESCOMBO-AUX-115-1 1-2054 2186 PI 1-2186 2183 PI 2182 PI 1-2183 1-2182 1-2051 1-2048 1-ESCOMBO-WB-104-2 1-2049 1-2050 1-ESCOMBO-WB-104-3 1-2116 1-2117 1-2118 1-ESCOMBO-WB-85-1 2-2128 2-2129 2-2130 PI 2130 2-ESCOMBO-TB-85-3 PI 2133 2-2131 2-2133 2-2132 2-ESCOMBO-SECDEG-85-1 PI 2208 0-2208 212B-E 212B-D 1-2179 1-ESCOMBO-EB-85-1 1-ESCOMBO-TB-85-1 1-2196 WB-85-2 2-ESCOMBO-213B-E 2184 PI 2-1931 2-2067 2-2072 PI 2072 2-ESCOMBO-TB-85-4 2073 PI 1-2073 1-EYE-PLOCA-85-1 2-2074 PI 2074 85-1 2-EYE-PLOCA-1-2071 PI 2071 1-ESCOMBO-TB-85-5 1-2070 PI 2070 1-ESCOMBO-TB-85-4 1-1418 ABOVE RADWASTE LAUNDRY
- 1. VALVES LOCATED IN BOX NEXT TO UTILITY TRAIL REPAIRS IN ACCORDANCE WITH NMOD 60069783.
ACCEPTABLE FOR DOMESTIC WATER SYSTEM
- 2. THE USE OF "PRESS CONNECT" FITTINGS IS 1-1346 SINKS
& BATHROOM OWCC KITCHEN 1-ESCOMBO-TB-85-2 AUX-85-1 0-ESCOMBO-TB-85-1 2-ESCOMBO-1-1299 04-17-2024 04-17-2024 N/A 0
102016-21-0.dgn 102016-21-0.dgn RHS1 1 Size RHS1 NOT REQUIRED PER CF3.ID5 102016 21 112 UNIT 1 & 2 FACILITY VENDOR TO MUW 0-2250 0-1895 0-1313 G.C. INSTRUMENT SHOP AC-503 AC-502 TO AC-501 1-2020 1-2021 1-2022 1-ESCOMBO-WB-85-2 PI 2118 2021 PI MAKE-UP WATER SYSTEM C-11/2" 1/2" C-1 1/2" C-1 C-11/2" EB-85-2 1-ESCOMBO-0-67 2-1898 2-1897 2-1873 0-1325 0-1318 0-1317 0-1314 2-1315 2-1307 2-1329 2-1330 2-1333 F I 0-1266 0-1272 0-1270 1-1297 1-1298 1-1811 0-1999 0-1976 0-1923 0-1975 0-1974 0-1973 0-1972 0-1971 0-1970 0-1969 2-1876 2-1875 1-1301 1-1300 0-1322 0-1324 0-1323 0-1316 0-1327 0-1927 0-1278 0-1277 0-1267 0-1833 0-1342 0-1341 0-1344 0-1336 0-1834 0-1269 0-1926 0-1956 AIR TRP 0-1995 P I P I 0-2031 1-2029 1-2035 2-2043 0-2023 P I SPECIFICATION 8828 & 8796.
- 3. MAKE-UP WATER PIPING IS UNDER 112 1
Revised Per DFT-7*6209 FXC2 DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
1-1 B-0111 WATER PUMPS CIRCULATING DC-663021 69
-D MECH SEAL CWP 1-1 S1-4 E
S1 MECH.
CIVIL 39-D PX 116A M
- FCV-491 TE 10 LT 42
-E 181 35
-E 251 33 422D-A 32 PI 857 B-0107 FX 3
PX 23 39-B 39-C PX 114A N7 N6 N7 N1 N6 N3 N3 N5 N5 N4 PI 459 V
V-0167 55-B 02 PI 460 V
V-0167 TI 728 TI 727 D
V-0167 D
V-0167 DC-663042-1 TI 729 19 B-0111 G
D G
D B-0111 B-0111 19 19 1
G-715-20 PI 77 7
31-E 15 D
D 1-1 TX 106 TX 105 G-716-20 PI 89 B-984-2 D
1-2 TX 108 TX 107 2
2 1-1A LX 8
TE-16 T 2403A GATE DISCH CIVIL 11.75'x 11.75' MAIN CONDENSER UNIT-1 DC-663041-1 172 172 TRP 56 TRP 57 V
V EMBEDDED YARD TURBINE BLDG.
ACP D
DWG. 500153 MECH. SEE D
G INTAKE STRUCTURE NOTE 2 3
12" ACP BY CIVIL 16" PS 165 B-0111 154A-A 34 G-677-16 BY CIVIL 11.75'x 11.75' DC-663012-1 E-1050-2 E-1049-2 R-0107 G-954-16 G-710-20 422E-A 32 424E-A 32 FCV-502 503 FCV G-534-20 B-0111 B-0111
- -10 1-2 NOTE 1 CIVIL-8" S1-4 PX 117A M
- TE 11 LT 43
-E 183 35
-E 254 33 424D-A 32 PI 858 B-0107 FX 4
PX 24 R-0388 PX 115A
- -10 EXCHANGERS SERVICE WATER HEAT TE 69 2
2 1-2A S
TO OCEAN DISCHARGE 428D-B 32 1
F-1881-8 BY CIVIL 18" VENT TO OCEAN OCEAN TO FLOW OVER-MECH SEAL CWP 1-2 E
S1 MECH.
CIVIL 4"
CIVIL 18" 4"
(TYP.)
CIVIL-20" NOTE 6 61
-E 60
-E B-0111 C-0253 C-0253 B-0111 F2-3836-4 F2-708-4 F2-3836-4 F2-703-4 34
-B UNIT 2 39-D 155A-E 34 62
-D 63
-D CLR FROM INTAKE D-2226-10 D-2227-10 68A
-D E-4520-2 S2-1/2(TYP)
FCV-492 G
F2 G-2224-10 G-2225-10 G
F2 F2-704-4 E-4519-2 22 NOTE 3 D-2091-14 12" 12" D-2092-14 COOLER CONDENSATE 1-1 12" E-928-2 23 18 B-0111 23 E-929-2 E
G B-955-2 18 18 B-0111 D
G D
G D-716-20 D-2093-14 NW NE LX 7
TE 14
-E 191 35 3
3/4" 72 72 71 73 LI 52 SW SE DC-663028-1 SPOOLS TYP.
BY CIVIL 18" VENT LX 9
TE 15
-E 193 35 GATE DISCH 72 71 73 72 10 M
LI 224 TE-17 T 2405A CIVIL 11.75'x 11.75' K-3/4" 57-A 02 CIVIL MECH.
K-2635-10 S-1313-1/2 WEIR MANUALLY ADJUSTED 02 53-B CIVIL 6" E
18 B-0111 LX 10 NOTES:
- 1. FOR RUBBER EXPANSION JOINT, SEE DC-663323-18 NOTED NOS. ARE FURNISHED BY SPEC. 8749, UNLESS OTHERWISE
- 2. VALVES IN THE INTAKE STRUCTURE WITH PG&E MARK
-A 30B
-A 33B HEADER SUMP PUMPS DISCH INTAKE STRUCTURE UNIT 2 HEAT EXCHANGER SERVICE WATER (TYP.)
TUBE PITOT NOTE 5 CONN (TYP.)
MANOMETER (TYP.)
RINGS THRUST CIVIL-8" (TYP.)
NOTE 7 (TYP.)
NOTE 7 CLG SYS CWP MOT (TYP.)
BY CIVIL, 11.75' PIPE G
D 438131 DWG.
CIVIL 0-1 SUMP SAMPLE WATER CIRC 10'(TYP.)
(TYP.)
21'x 14' DISCH HDR COND PPS DISCH HDR COND PPS (TYP.)
1/2" UNIT 2 108017 CIRCULATING WATER SYSTEM 56-D SYSTEM CHLORINATION CIVIL CIVIL UNDER SPEC. 8711, UNLESS OTHERWISE NOTED
- 3. VALVES IN THE TURBINE BLDG. WITH PG&E MARK NOS. FALL
- 5. ALL VALVES, TUBING & PIPING BY CIVIL, SEE DWG. 438103 12'x 16' BY CIVIL 12'x 16' BY CIVIL 11.75'x 11.75' BY CIVIL 15'x 9' E-2 E-2 E-2 TE 70 TO OCEAN 2"DISCH 11 NOTE 11 NOTE 11 NOTE 11 NOTE CIVIL E
MECH E-2 NOTE 12 C-0244 12" 12" C-0244 UNIT 2 FROM (LEASED)
MONITORS CHLORINE CONTINUOUS UNIT TWO UNIT ONE &
S13 G
CIVIL BY CIVIL BY G
S13 PI 1881 14 NOTE 14 NOTE 13 NOTE 13 NOTE NOTE 15 R-0109 3/4" 2"
TUBING TYGON 3/4" GUARD PIPE 1-1/2" PVC R-0107 PI 1880 B
16 NOTE E
E E
16 NOTE R-0107 E
B D
R-0107 R-0107 PX 117D PX 115D PX 117C PX 115C PX 117B PX 115B R-0388 (TYP)
PX 114B PX 116B PX 114C PX 116C PX 114D PX 116D (TYP)
CIVIL 108" R-0388 (TYP)
R-0388 73 72 72 71 LI 223 71 73 72 71 73 72 72 71 73 72 LI 222 LI 221 73 71 LI 50 72 72 73 71 72 72 LI 49
-E 188 35 (SPARE)
PIT 468 PIT 467 PIT 465 PIT 466 156C-E 34 158C-E 34 151C-E 34 153C-E 34 HEADER UNIT 2 AIR RELEASE NOTE 17 NOTE 17 NOTE 8 NOTE 8 8
NOTE 8
NOTE
- 8. NOZZLE 71 INLETS AND OUTLETS CAPPED.
- 4. DELETED E-11/2 3/4" R-0109 DC-663028-2 SPOOLS 72 72 LI 51 S2-3/4 S2-3/4 (NOTE 18)
(NOTE 18)
S S2 ANI 701 ANI 702 103A-B 31 101A-B 31 (PVC CLEAR)
TYGON TUBING 1"(ID)x ?"(W)
(PVC CLEAR)
TYGON TUBING 1/2"(ID)x ?"(W)
ANALYZER CHLORINE WATERBOX S13-1 R-0107 (TYP OF 4)
SF6 INJECTION (NOTE 19)
SALTWATER SYSTEMS 245 E
A B
C D
E A
B C
D 30A 31A 32A 33A 34A 35A 36A 37A 38A 39A (TYP.)
2,9,11 DC-663318-ITEM 1 R-0388 R-0388 S
S2 D-710-20 1-44 1-226 E
G E-3/4" E-3/4" 1-227 1-45 R-0107 104 1
04-01-2024 04-01-2024 N/A 0
3 Size 102017-3A-0.dgn 102017-3A-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 102017 UNIT 1 3A 104 IN TURBINE BUILDING. (REF:6033093)
FROM CW TUNNELS TO FIRST FLANGE
- 20. LINED WITH CURED-IN-PLACE PIPING NOTE 20 NOTE 20 G
D D-711-20 NOTE 20 NOTE 20 G
D G-711-20 1-1501 RO 101 1-1505 1/2" S-
/4" S-3 RO 100 PI 1505 CO2-SPOOL-S TOP CO}
FEED (TYP. 6)
CO2-CRADLE-S PG&E 1-1500 DC-663318-1,9 ITEM 3 (TYP.)
FEED (TYP. 6)
/4" S-3 CO2-CRADLE-N CO2-SPOOL-N D-715-20 1/2" S-1-1502 RO 102 RO 103 1-1503 15'x 9' M
425D-B 32 (TYP) 9'x 9' Revised Per DDT-4*2158 FXC2 NOTE 1 NOTE 21 104 1
FOUR CATHODIC PROTECTION TEST STATIONS EACH CONNECTION
- 14. REFER TO DC-6009321-5 FOR DETAILS ON FLANGE CONNECTION AR A0567627.
BUT IS SCH 80 FOR STRENGTH AND TO ALLOW THREADING. REF AT-MM
-A 32A
-C 30A
-A 33A
-B 33A
-B 32A
-D 32A
-A 36A
-B 36A
-A 39A
-C 34A
-D 34A
-C 39A
-C 32A
-B 32A
-D 32A
-A 39A
-E 30A
-C 30A
-B 33A
-B 35A
-E 34A
-C 37A
-C 37A CLASS II
- 6. ?" NOMINAL WALL WELDED STAINLESS STEEL ASTM A358 TP316L,
- 7. TO BE FURNISHED UNDER CIVIL SPEC. 8842
- 9. WHITEY SS-63TS12
- 10. DELETED
- 11. 2"\\ PVC BALL VALVE, UNION END TYPE, S/C 75-4713
- 12. BLIND SECTION OF SPECTACLE HAS BEEN REMOVED
- 13. FOUR CATHODIC PROTECTION TEST STATIONS
- 15. 2" 150# PVC TYPE #346, STOCK CODE 75-4713
- 17. INSTRUMENT ABANDONED IN PLACE.
HEAT EXCHANGER CHANNEL HEADS INSTRUMENT TAPS FOR 1-1 AND 1-2 SERVICE COOLING WATER
- 16. USE PIPE SPEC. "B" TYPICAL FOR ALL VENTS, DRAINS AND BUT IS SCH 80.
REQUIREMENTS OF PG&E SPEC "S13"
- 19. THIS LINE MEETS MATERIAL
-C 30A WITH EXTERNAL COMPOSITE WRAP.
- 21. EXPOSED SECTION OF PIPE REPAIRED RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
30B 31B 32B 33B 34B 35B 36B 37B 38B 39B
-E 30A C
N2 TI VI VI 57-E 14 C
E N1 TI C
PI 1-1 SALTWATER PUMPS AUXILIARY DC-663030-1 1
LS 163 246A-E 33 PI 452 LS 355 HIA 55 G1-687-24 MECH.
CIVIL 500153 MECH.
DWG.57744 426E-A 32 TI 184 PT 5
G1-713-24 TW 186 57.2 57.2 V
V
-E 32A S
156D-E 34 32B
-E 56 EMBEDDED G1-3681-6 C
N2 TI VI VI 57-D 14 N1 TI C
PI 1-2 1
LS 164 248A-E 33 PI 454 LS 356 HIA G1-680-24 YX 485 MECH.
CIVIL 500153 MECH.
DWG.57744 428E-A 32 TI 185 3/4" TC PI NOTE 3 1-2 G1-714-24 TW 187 57.2 57.2 V
V S
158D-E 34 30B
-E 428G-A 32 FX 8
NOTE 2 17 56 EMBEDDED WATER HEAT EXCHANGERS COMPONENT COOLING DC-663212-1&2 G1-933-24 M
57.3 V
NOTE 4 R-0183 EMBEDDED M
-D 427 32 FCV-496 54 G1-676-24 54
-D 429 32 FCV-601 M
-D 425 32 FCV-495 54 7B C
E C
E NOTE 5 NOTE 5 S2-4000-2 69-D 19 S2-519-2 S2-518-2 G1-2 C
E G1-3682-6 G1 S2
-C 35B
- 8. VALVES REFERRED TO THIS NOTE FALL UNDER SPEC.0722 E
C2 C
E 3"
3" 4"
3" 3"
4" C
G1-680-24 C2 G1 C2-5198-4 VENT SCREENED 3"
E C2 C
E 3"
3" 4"
3" 3"
4" C
G1-687-24 C2 G1 C2-5199-4 VENT SCREENED 3"
SUMP DWG 438094 SEE CIVIL ASW-VACUUM RELIEF VALVES
-D 31B
-D 31B
-D 30B
-E 30B 39-D 39-D FILTERS WASTE LIQUID (TYP.)
24"X20" PS 185A/B (TYP.)
PS 186A/B (TYP.)
NOTE 9 (TYP.)
NOTE 10 (TYP.)
NOTE 11 C E E
C2 C E E
C2 (TYP.)
NOTE 12 (TYP)
NOTE 3 (TYP.)
57.1 7B UNIT 2 108017 S8 SCH.40 3/4"-316
-C 34B
-B 34B UNIT 2 108017 UNIT 2 108017 152D-E 34
-B 39B 1-8 GATE 1-9 GATE AUXILIARY SALTWATER SYSTEM PUMP MOTOR 1-1 AUXILIARY SALTWATER 1
2 TI 1043 TI 1044 TI 1045 DC-663030-2 T2435A TI-1038 T2436A TI-1046 TI 1041 TI 1042 PUMP MOTOR 1-2 AUXILIARY SALTWATER 1
2 TI 1052 TI 1053 TI 1054 DC-663030-2 T2439A TI-1047 T2440A TI-1055 TI 1050 TI 1051 T2437A TI-1040
- TI-1049
- T2441A POS 175 POS 176 1-2 PUMP SALTWATER AUX ASP ROOM 1-2 ASP ROOM 1-1 FLOOR EL.-2.1' 1-1 PUMP SALTWATER AUX WATERTIGHT ROOMS AUXILIARY SALTWATER PUMP FLOOR EL.-2.1' 14 NOTE 14 NOTE
- 13. ALL PIPES ON THIS SHEET ARE PG&E CLASS "C" UNLESS OTHERWISE NOTED
-A 32B
-C 32B D & LX 57.2 D & LX 57.2 D & LX 57.2 D & LX 57.2 NOTE 15 NOTE 15
-B 39B
-C 39B
E C
E C
E G1-4 NOTE 17 NOTE 16 FX 2
C E
NOTE 2 NOTE 16 NOTE 17 G1-4
-A 35B
-C 35B
-A 35B
-C 35B
-A 178 36
-A 176 36 18 NOTE 18 NOTE 18 NOTE
-A 35B
-A 37B
-C 35B B
M1 B
M1 2"
NOTE 3 2"
E C
E C
B M1 B
M1 (TYP)
NOTE 3 2"
NOTE 3 2"
E C
E C
2" G2-6158-24 D
FE 485 TW 485 2"
4" G2 G1 G1 G2 NOTE 1 E
A B
C D
E A
B C
D C
E
-E 198 35 D
4" YX 484 2"
426G-A 32 TW 484
-E 196 35 2"
G2-6159-24
-B 10A 36
-B 10A 36 G1 G2 G2 G1 NOTE 1 NOTE 1 NOTE 1 (TYP)
-A 34B
-C 34B 19 NOTE 19 NOTE N4 602 FCV NOTE 7 603 FCV N4 NOTE 7 TC TC 438093, 94 438093, 94 TC
& 438095
& 438095 G1-2 G1 S2 D.R.
6 PT IT.33 154D-E 34 OCEAN TO OCEAN TO SALTWATER SYSTEM 200 201 54
& RTD'S CAN BE INSTALLED FOR TESTING.
- 20. TI-186 & TI-187 CAN BE REMOVED TEMPORARILY TI 186 NOTE 20 SEE TI 187 NOTE 20 SEE AND DC-663313-57.
WITH VACUUM BREAKER SEE DC-663313-47
- 10. FOR 3"-150# FLANGED ENDS ALUMINUM BRONZE SWING CHECK VALVE V
2" S13 G1 V
2" S13 G1 NOTES:
-C 33B
-A 35B EQUAL
- 4. ALL SS-3/4" AUTOMATIC AIR VENT ARMSTRONG NO. 11-2V OR APPROVED
-B 33B
-C 35B DWG. DC-663166-104
- 2. 11/2" CONTROMATICS BALL VALVE WITH 4" FLANGE. SEE 36B-A/C SEE DWG.425852 ARE COATED WITH STACKWRAP COATING SYSTEM IN THE INVERT AREA.
- 1. PORTIONS OF LINES G1-680-24, G1-687-24, G2-6158-24 AND G2-6159-24
- 3. USE PIPE SPECIFICATION "M1" TO NOTE 8
- 5. VALVES WITH ITEM NUMBERS FALL UNDER SPEC. 8729, UNLESS REFERRED NOTES CONT'D ABOVE NOTES CONT'D BELOW S13 1
7181 11/2 C
S13 1
7182 11/2 C
INLET CONSIDERED PART OF THE SEISMIC SUPPORT AT THE VACUUM BREAKER
- 9. SPEC E PIPE THREADS INTO A STAINLESS STEEL FLANGE, WHICH IS WITH 10" DIA. HANDWHEEL SEE DC-663313-48
- 7. FOR PROVISIONS FOR LONG TERM COOLING WATER SEE DWGS. 107031 AND ONLY (ALL PLACES)
- 12. FLAT FACE FLANGES ON LINES 5198 & 5199 TO HAVE RUBBER GASKETS (DIELECTRIC) FLANGE ASSEMBLY INSTALLATION AT THESE LOCATIONS
- 16. 24" DIELECTRIC 150# INSULATION KIT (STOCK CODE #95-0523) EXCEPT STOCK CODE #95-0170
- 17. PIPE SB/B-675 STOCK CODE #95-0171, FLANGE SB/B-462
3 Size 102017-3B-0.dgn 102017-3B-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 102017 UNIT 1 3B 97 G1-687-24 G1-680-24 97 1
97 1
FXC2 Revised Per DFT-7*5911 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
60 61 62 63 66 67 68 69 64 65 LI 58 LI 59 241A-E 33 243A-E 33 STR 118 S
243A-A 33 DC-663020-1 B
A PX 205 STRAINER START-UP PX 206 7
TX 197 2
1 PX 215 PX 250 K-4078-2 K-2247-2 428A-A 32 FCV-381 NOTE 11 5"
5" PUMPS INTAKE COOLER 1-1 1-2 DC-663035-2 6"X4" 6"X4" 14 14 6"
6" C-0244 C-0224 52-14D-14 6"
6" B-0102 B-0102 V
V V-0673 V-0673 425A-A 32 FCV-380 B-0102 NOTE 5 V
V R-0107 R-0107 NOTE 5 B-0104 NOTE 5 R-0107 D
NOTE 5 R-0107 D
7 TX 199 B-0102 11/2" 7
TX 198 2
1 B-0102 NOTE 5 V
V R-0107 R-0107 NOTE 5 B-0104 NOTE 5 R-0107 D
NOTE 5 R-0107 D
7 TX 200 B-0102 11/2" 39
-B PUMPS WASH SCREEN G
D G
D 106 HCV 107 HCV B-0111 G-2224-10 B-0111 B-0111 B-0111 G-2245-10 G-2225-10 8"X6" 8"X6" K-2241-8 K-2240-8 K-2243-6 K-2244-6 G-0627 D
D D
G-0627 G-0627
-A 62A K-2233-6 K-2232-6 G-0627 D
PS 281 PS 280 K-6 B-0102 TI 705 TI 693 TE 42 T2418A TS 79 PX 270 V
TI 695 TS 80 PX 271 V
TI 806*
TI 756
- -11/2 K
TE 36 T2424A TE 41 TE 37 TI 704 K
LS 183*
TI 697 TE 44 PX 272 V
TI 699 TE 45 PX 273 V
TE 38 TE 39 TE 40 TE 31 T2420A TE 33 TE 30 T2421A TI 802 T2423A TI 757 YS 2
K K
31-A PI 274B PI 274A PI 275B PI 275A STR 61 DISCH CWP 1-1 E-4519-2 PI 853 NOTE 9 NOTE 8 NOTE 8 NOTE 9 NOTE 7 E-11/2 E-407-11/2 V-0166 V-0166 SUMP 1-1 STRUCTURE INTAKE C-0140 C-0140 PUMP 1-1 CIRCULATING WATER SUMP PUMPS CWP TOP COVER DC-663021-76 1-1 62A -D NOTES:
BEARING DESIGNATION TOP GUIDE BEARING TOP THRUST BEARING BOTTOM GUIDE BEARING PUMP GUIDE BEARING 1
2 3
4 LS 120 LS 128 LS 126 247B-D 33 COVER SUMP CWP TOP SUMP 1-1 STRUCTURE INTAKE SERVICE AIR FROM INTAKE SEAL LEAKOFF S-1/2 EDUCTOR S-1/4 S-1 MECHANICAL SEAL 30-A K-4231-6 K-2239-8 K-2238-8 K-2237-8 NOTE 6 G-2226-10 1-1 1-2 11/2" B-0111 10 2"
B-0111 10 NOTE 6 G-2227-10 COOLERS INTAKE DC-663034-1 11/2" G-533-10 NOTE 10 NOTE 10 2"
2 PIPING TYP.
EMBEDDED K
2 7
K-699-3/4 K
- -5
- -11/4 1
LS 166
-E 258 33 2
3 MOTOR 1-1 CIRCULATING WATER PUMP DC-663031 (REF. SH. 6A FOR CWP 1-2)
K-2480-11/2 D
-C 259 33
- -11/4 K-698-3/4 1
COOLER AIR 2
COOLER AIR TE 43 NOTE 4 D
D NOTE 4 LS 170 4
-C 259 33
- -11/2
- -11/2 TS 81 TS 82
- YS 1
NOTE 4 COOLER 3 AIR COOLER 4 AIR D
D FOR CWP 1-2)
(REF. SH. 6A S-1/2 PROTECTION SYSTEM WATER FROM FIRE UNIT 1 MAKE-UP SUCTION CWP 1-1 NOTE 2 NOTE 2 TI 692 S-1/2 61-D 62-D 1-3 11 DISCHARGE WATER PUMP 1-1 CIRCULATING DISCHARGE WATER PUMP 1-2 CIRCULATING 11 SUCTION WATER PUMP 1-1 CIRCULATING (TYP. 4)
SEPARATORS CYCLONE MTR COOLER WATER PUMP 1-2 TO CIRCULATING 30A -B 32A
-C 32A
-C 30A -B
-B 31A CWP TOP COVER DRAINAGE SYSTEM MOTOR COOLING SYSTEM AND CIRCULATING WATER PUMP 1-1 (REFER TO SH.6A FOR CWP 1-2 SYSTEM)
-A 181 36
-A 182 36
-A 183 36 4
NOTE
-A 184 36 18 91
-B K-1710-3/4 FI L
T E
R C
A R
B O
N EXCHANGER ION 3/4" HOSE TYGON (TYP 3)
NOTE 12 1"
1"
- K E
G1 R-0187 E
A B
C D
E A
B C
D B-0102 15 NOTE 1/2" FI 2021 K
S FI 2026 S-1/2 K
S 45V3 45V3 FI 2025 S-1/2 E
S2 18 NOTE S-1/2 R-0109 E
S2 18 NOTE R-0109 STR 61A R-0109 R-0109 R-0109 R-0109 E
S2 E
S2 STR 61B E
S S
E E-1/2 11/4 E-3/4 16 NOTE NOTE 17 E-1 S-1/2 E
S S
E E-1/2 NOTE 18 E-1 E-1 E-3/4 11/4 16 NOTE NOTE 17 E-1 18 NOTE E-1 E-1 E-1 R-0109 S-1/2 E-1/2 16 NOTE 21/2 R-0109 E-11/4 R-0109 31-B NOTE 17 E-11/4 E-11/2 E-1 R-0109 S
E E-1/2 E-1/2 S-1/2 S-1/2 S-1" NOTE 20 NOTE 20 SV-760 NOTE 20 S
S-1" S-1" S
382 PCV RV-1076 884
- -3/4" 1360 K-2482-11/2 1361 NOTE 21 DRAIN TO FLOOR FI 486 NOTE 12 AUTOMATIC AIR VENT.
- 21. ARI MODEL S-050-VAC S-1" NOTE 20 1364 SALTWATER SYSTEM 60B-E 65B-E 65B-A 60B-A 1414 1413 1412 1415 1417 1416 1396 D
D 1390 S-1/2" 98 99 100 101 S-1/2" 22 NOTE K S K S K-7104-3/4 K-7103-3/4 K-7100-3/4 K-7099-3/4 121 125 V-0672 V-0672
-D 50A
-D 50A S-7091-?
S-7090-?
TI 742 TI 742A NOTE 23 PUMP 1-2 MTR COOLERS FROM CIRCULATING WATER TI 5048 K-3/4 K-3/4 K-3/4 K-3/4 235 95 96 90 NOTE 19 ANI 148 DRAIN TO FLOOR SW-1-1508 SW-1-1507 SW-1-1509 FLOOR TO K-2 E-1/2 E-2 VENT E-1/2 E-2 E-2 S-1/2 RO VENT NOTE 24 K
CLEAR E
REG SUPPLY OUTPUT 2
PI 1443A PI 1443B RV-1444 PCV-1443 PCV-1444 PI 1445
-1510 SW-1 S-1/2 S-1/2 RV-1447 PG&E N
6)
OF (TYP UNBIASED TANK SENSING LINE S-1 S-1 HEAD TANK INTAKE COOLER VENT STRAINER START-UP S5-1/2 S5-1/2 S
S5 S
S5 S
S5 S5-1/2 MODEL 4726K24 (STR 61A & 61B)
- 16. BALL VALVE, BRONZE, THD.- McMASTER CARR, MODEL 4726K39 (STR 61),
01-30-2024 01-30-2024 N/A 6
0 3 Size 102017-6-0.dgn 102017-6-0.dgn NOT REQUIRED PER CF3.ID5 102017 UNIT 1 108 SAMPLE OIL S-?"
NOTE 13 NOTE 13 HOSE COUPLINGS, S/C 17-2185 (OR EQUIV)
- 12. 3/4" FLEX HOSE, SYNFLEX 3130-12, S/C 17-2193, WITH 3/4" NPT X UNLESS OTHERWISE NOTED.
- 1. ALL PIPING ON THIS SHEET ARE PG&E CLASS "E"
- 2. FOR RUBBER EXPANSION JOINTS SEE DC-663323-1.
ARE 3/4" IN SIZE EXCEPT AS NOTED.
- 3. VENT AND DRAIN VALVES WITH PG&E VALVE NOS.
SYS. DWG. 102036,SHTS. 31B & 31C.
RECORD NO. DC-663086 AND MULTI-VARIABLE INST.
- 4. USED FOR CARDOX FIRE PROTECTION SYS. PG&E FABRICATION MATERIAL OF COOLER.
UPSTREAM MATERIAL SHALL BE COMPATIBLE WITH OF INTAKE COOLER VENT AND DRAIN VALVES (R-0107),
- 5. USE BRONZE OR BRASS NIPPLES ON DOWNSTREAM SIDE VIA 6" FLEXIBLE HOSE AND 6" 0 STD WT. C.S. PIPE FROM CWP 1-1 SUCTION BAY TO CWP 1-2 SUCTION BAY
- 6. ADDITIONAL 6" OUTLET TO DIVERT WATER DISCHARGE 61-D 60-D 64-C 68-C 69-C 60-C 60-D 61-C 61-D 62-D SUPPLY WATER TO BOTH CWP'S MECH. SEALS.
ONLY. IN SERVICE PUMP AS ALTERNATE SOURCE WILL SUPPLY SOURCE TO CWP 1-1 SEAL DURING DEMUSSELING
- 7. 3/4" FLEX HOSE CONNECTION IS FOR ALTERNATE WATER 69-E 67-D 68-D
- 8. WHITEY/SWAGELOK SS-45S8
- 9. BALL VALVE (WHITEY-44S6)
- 10. CHECK VALVE; CENTERLINE; MODEL # 10C06067F5
- 11. KEYSTONE FIG.122 67-D 60-E 61-E 62-B 60-A 64-B
- 14. DELETED
- 15. BALL VALVE (PBM INC. SP-H-32-S-2/F0),STOCK CODE 75-3094 1" (STR 61A & 61B)
- 17. TUBING (FLEX.), NALGENE 980 CLEAR BRAIDED VINYL, 11/4" (STR 61),
66-E 68-D 69-D 68-E 68-D 69-D 68-E 68-D 63-D
- 19. BALL VALVE (NIBCO K595-CS-R-66-LL, STOCK CODE 78-1247 COATING AND FEATHER EDGES OF WELL-BONDED COATING.
COATING IS DEGRADED, NO REPAIR REQUIRED. REMOVE LOOSE PORTIONS OF PIPING ARE S13, SEE ISOMETRIC. IF BIOX INTERNAL 13.
SPARE.
TI-742 & TI-742A. TI-742A IS
- 23. TI-742 IS A DUAL ELEMENT T/C, CHEMISTRY DURING GAS SAMPLING.
THE RO CAN BE USED OR REMOVED BY DETERMINED BY CHEMISTRY/OPERATIONS.
- 24. ORIFICE OF 0.25" SIZE MAXIMUM
63-B MODEL #SS-62TVC008.
- 22. BALL VALVE, SWAGELOK VCO TYPE, 67-C 60-D 61-D NOTE 25 NOTE 25 REPLACEMENT VALVE.
- 25. SEE RPE 8*5286 FOR ALTERNATE 64-B 69-B FXC2 ZNS4 ZNS4 Revised Per DFT-7*6122 D
108 1
108 1
108 1
108 1
108 1
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
60A 61A 62A 63A 66A 67A 68A 69A TI 707 TI 745 TE 58 T2419A TS 84 PX 274 V
TI 747 TS 85 PX 275 V
TI 813*
TI 758 K
TE 52 T2429A TE 57 TE 53 TI 706 K
LS 185*
TI 749 TE 60 PX 276 TI 751 TE 61 PX 277 V
TE 54 TE 55 TE 56 TE 47 T2425A TE 49 TE 46 T2426A TI 809 T2428A TI 759 YS 4
K K
31-A PI 276B PI 276A PI 277B PI 277A DISCH CWP 1-2 E-4520-2 NOTE 6 NOTE 5 E-11/2 E-359-11/2 V-0166 V-0166 SUMP 1-1 STRUCTURE INTAKE C-0140 C-0140 PUMP 1-2 CIRCULATING WATER SUMP PUMPS CWP TOP COVER DC-663021-76 1-4 1-2 (REFER TO SH.6 FOR CWP 1-1 SYSTEM)
NOTES:
UNLESS OTHERWISE NOTED.
- 2. VENT AND DRAIN VALVES WITH PG&E VALVE NOS.
- 6. BALL VALVE (WHITEY-44S6)
BEARING DESIGNATION TOP GUIDE BEARING TOP THRUST BEARING BOTTOM GUIDE BEARING PUMP GUIDE BEARING 1
2 3
4 LS 121 LS 129 LS 127 246B-B 33 COVER SUMP CWP TOP SUMP 1-1 STRUCTURE INTAKE SERVICE AIR FROM INTAKE SEAL LEAKOFF S-1/2 EDUCTOR S-1/4 S-1 MECHANICAL SEAL 30-A 7
2 PIPING TYP.
EMBEDDED K
2 7
K-648-3/4 K
- -5
- -11/4 1
LS 168
-C 259 33 2
3 MOTOR 1-2 CIRCULATING WATER PUMP DC 663031 K-2481-11/2 D
-C 259 33
- -11/4 K-679-3/4 1
COOLER AIR 2
COOLER AIR TE 59 D
D LS 172 4
-C 259 33
- -11/2
- -11/2 TS 86 TS 87
- 64A 65A K-2233-6 64
-A K-2244-6 64
-E YS 3
NOTE 3 NOTE 3 NOTE 3 3
COOLER AIR 4
COOLER AIR D
D TI 744 K
MOTOR COOLING SYSTEM CIRCULATING WATER PUMP 1-2 (REF. SH. 6 FOR CWP 1-1)
NOTE 5 S-1/2 NOTE 6 K-2483-11/2
-D 67A
-C 65A
-D 65A
-D 66A
-D 65A (REF. SH. 6 FOR CWP 1-1)
HEAT EXCH 1-2 COOLING FROM INTAKE NOTE 3 (TYP. 4)
SEPARATORS CYCLONE SYS. DWG. 102036,SHTS. 31B & 31C.
RECORD NO. DC-663086 AND MULTI-VARIABLE INST.
- 3. USED FOR CARDOX FIRE PROTECTION SYS. PG&E
-C 62A
-B 62A
-B 66A
-B 67A SUPPLY WATER TO BOTH CWP'S MECH. SEALS.
ONLY. IN-SERVICE PUMP AS ALTERNATE SOURCE WILL SUPPLY SOURCE TO CWP 1-2 SEAL DURING DEMUSSELING
- 4. 3/4" FLEX HOSE CONNECTION IS FOR ALTERNATE WATER
-D 31A
-A 186 36
-A 187 36
-A 186 36
-A 185 36 E
A B
C D
E A
B C
D NOTE 7
- 7. BALL VALVE (PBM INC. SP-H-32-S-2/FQ)
-D 64A S-1/2 FI 2022 E
S2 10 NOTE S-1/2 R-0109 E
S2 10 NOTE R-0109 STR 62A R-0109 E
S S
E E-1/2 11/4 E-1/2 8
NOTE E-1 E-1/2 R-0109 R-0109 R-0109 E
S2 E
S2 STR 62B E-1 S-1/2 E
S S
E E-1/2 NOTE 10 E-1 10 NOTE E-1 E-1 E-1/2 STR 62 PI 854 NOTE 4 E-3/4 11/4 8
NOTE E-1 E-1 R-0109 S-1/2 E-1/2 8
NOTE 21/2 R-0109 E-11/4 R-0109 31-B E-11/4 E-11/2 E-1 R-0109 S
E NOTE 9 NOTE 9 E-11/4 NOTE 9 E-2 4726K39 (STR 62), MODEL 4726K12 (STR 62A & 62B).
- 8. BALL VALVE, BRONZE, THD. - McMASTER CARR, MODEL 11/4" (STR 62), 1" (STR 62A & 62B).
- 9. TUBING (FLEX.), NALGENE 980 CLEAR BRAIDED VINYL,
-D 66A
-D 67A
-D 66A
-D 67A
-C 66A
-C 67A
-D 66A
-D 67A S-1/2 S-1/2 COOLER PUMP 1-2 TO INTAKE 885 DRAIN TO FLOOR 1362 1363 NOTE 11
- 11. ARI MODEL S-050-VAC AUTOMATIC AIR VENT.
-A 61A
- -3/4"(NOTE 12)
-B 62A 3/4" NPT X HOSE COUPLING, S/C 17-2185 (OR EQUIV).
- 12. 3/4" FLEX HOSE, SYNFLEX 3130-12, S/C 17-2193, WITH G-0627 G-0627 V-0672 V-0672 SALTWATER SYSTEMS NOTE 13
-C 66A TI-743A IS SPARE.
- 13. TI-743 IS A DUAL ELEMENT T/C, TI-743 & TI-743A.
TI 743A TI 743 TI 5049 01-30-2024 01-30-2024 N/A 0
3 Size 102017-6A-0.dgn 102017-6A-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 102017 UNIT 1 6A 97 WHITEY/SWAGELOK SS-45S8 5.
- 14. SEE RPE 8*5286 FOR ALTERNATE REPLACEMENT VALVE.
NOTE 14 NOTE 14
-B 62A
-B 67A S-?"
SAMPLE OIL FXC2 Revised Per DFT-7*6122 D
V 97 1
97 1
97 1
97 1
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
181A-A 36 182A-A 36 183A-A 36 184A-A 36 G
S13 NOTE 21 B-0104 NOTE 6 R-0107 PI 2410 LI 59 LI 58 241C-E 33 243C-E 33 STR 118 S
SV-760 EXCHANGER ION 1"
1" N
O B
R A
C R
E T
L I
F 3/4" 3/4" 18 97
-B NOTES NOTE 22 NOTE 21 60 61 62 63 64 65 66 67 68 69 B-0111 (REFER TO SH.6A FOR CWP 2-2 SYS)
A E
D C
B A
E D
C B
B-0111 F1 B
428A-E 32 425A-E 32 S2-1/2 R-0388 R-0109 R-0109 R-0109 B
E E
B E
E S
E R-0109 E
S E
B B
E S
E S
S 11/4" 11/4" 21/2" E
B 28 NOTE B
E 11/4" NOTE 27 30-A E-1 B
E PI 274B PI 274A STR 61A PI 275B PI 275A STR 61B PI 853 S2 E
STR 61 S2 E
1/2" 1/2" 1/2" R-0109 R-0109 1/2" 1/2" R-0109 B
E NOTE 26 FI 2021 3/4" 3/4" F1 (6001167-23)
PP 0-1 BSWS BAY CWP 1-2 NOTE 8 5"
K 4078 2 K 2247 2 K 4231 6 FCV-381 K 2232 6 PX 205 5"
K 2233 6 G-0627 G-0627 2
7 K 699 3/4 1
2 3
4 TOP GUIDE BEARING TOP THRUST BEARING BOTTOM GUIDE BEARING PUMP GUIDE BEARING TI 699 TI 697 TS 82 TS 81 TE 45 TE 44 TE 33 TE-31 T2420A YS 1
TE 40
TE-30 T2421A
- - 11/4 TE 34 TE 32 TE 41 TI 705 LS 166 258-E 33 K 2482 11/2 K 2480 11/2 TI 695 TE 43 TS 80 NOTE 4 TI 693 TE-42 T2418A TS 79 K
3/4 (663035-2)
PUMPS INTAKE CLR 2-2 14 6"x4" 6"
6" C-0224 B-0102 PX 250 PX 215 K 2238 8 14 6"x4" 6"
6" C-0244 PX 206 FCV-380 2-1 K 2237 8 K 2239 8 B-0102 1/2" TX 197 TX 199 2
10 11/2" 7
2 7
B-0102 TYP NOTE 2
-B 68A 1
V 11/2" B-0102 106 HCV-G 2226 10 33-B 11 SUCTION CWP 2-2 D
2-1 TX 198 R-0107 NOTE 5 V
V-0673 G-0627 11 33-B SUCTION CWP 2-2 G-0627 K -
3/4 1
COOLER AIR NOTE 4 2
COOLER AIR TE 37 TI 704*
LS 183
-C 259 33 V
D D
2 3
(REF. SH. 6A FOR CWP 2-2)
DC-663031 CWP MOTOR 2-1 NOTE 4 3
COOLER AIR 4
COOLER AIR NOTE 4 PX 273 PX 272 TI 757 TE-35 T2422A YS 2
T2423A 4
TI 756 TI 806
- - 11/2 K
K 698 3/4 LS 170
-C 259 33 D
PX 271 K
- - 11/4 K 2480 11/2 7
TI 692
- K 2
PX 270 11/2" B-0102 NOTE 5 R-0107 2"
G 2227 10 G
F2 G
D 2-2 10 TX 200 B-0111 G 2225 10 V
D D
K 2240 8 NOTE 6 B-0111 NOTE 20
-E 63A 8"x6" 8"x6" K 2241 8 S8 FI 205 D
2"-150#
E 8 E 6 FI 204 D
E 8 E 6 F1 5426 8 G
F1 F1 8
B-0111 G 533 10 33-B B-0111 34-B B-0111 G 2245 10 34-B BEARING DESIGNATION INTAKE COOLER HEAD TANK DC663020-1 NOTE 9 B-0111 DISCH.
CWP 2-2 INTAKE COOLERS DC663034-1 NOTE 9 CWP 2-1 DISCH.
B A
NOTE 7 VENT NOTES (CONT'D)
G-0627 G-0627 G-0627 K
3/4 D
PS 280 152B-E 34 D
PS 281 K 2244 6 157B-E 34 K
6 B-0102 63A -B K 2243 6 MTR COOLERS TO CWP 2-2 EDUCTOR G-0627 SERVICE AIR FROM INTAKE S
1/4 S
1 SEAL LEAKOFF S
1/2 30-A MECHANICAL SEAL COVER SUMP CWP TOP 245B-B 33 LS 120 LS 126 LS 128 WATER PUMP 2-1 CIRCULATING FOR CWP 2-2)
(REF. SH. 6A S
1/2 18 NOTE NOTE 18 NOTE 19 NOTE 19 S
1/2 2-1 2-3 SUMP PUMP (DC663021-76)
11/2 C-0140 V-0166 V-0166 C-0140 E 407 11/2 34-B E 4519 2 30-A SUMP 2-1 INTAKE STRUCTURE PI 2411 B 3 K
3/4 1710 E11/2 E
1 E
1 E
1 E
1 E
1 E
1 E
11/4 E
11/2 E
G1 V
V-0673 K
S FI 2026 S-1/2 45V3 S-1/2 V
45V3 FI 2025 K
S NOTE 23 NOTE 23 S-1" S
S-1" K
S S-1" NOTE 22
-C 65B
-E 65B PCV-382 SALTWATER SYSTEM 1360 DRAIN TO FLOOR 934 1361 243A-A 33 FI 486 1364 NOTE 22 3/4 G 2224 10 V
D D
D 210 1340
-E 65C
-E 60C D
1390 S-1/2" 1415
-A 65C 1412 1396
-A 60C 1416 1414 1413 S-1/2" ANDCWP TOP COVER DRAINAGE SYSTEM CIRCULATING WATER PUMP 2-1 MOTOR COOLING SYSTEM D
1417 1016 101 100 K S K-7104-3/4 K S K-7103-3/4 K-7099-3/4 K-7100-3/4 TI 5048 G-0627 G-0627 V-0672 V-0672 F1 5583 8 (6001167-18)
PP 0-2 BSWS BAY CWP 2-2 VALVE PLUG 8"-150#
(TYP 2)
NOTE 10 1475 MECH CIVIL 8
E 7142 8
E 7141 E
F1 (NOTE 12)
TO R.O. SYS.
(NOTE 12)
TO R.O. SYS.
NOTE 15 16 NOTE NOTE 16 NOTE 15 NOTE 25 NOTE 5 R-0107 NOTE 5 R-0107 20 NOTE V-0673 STRAINER START-UP STRAINER START-UP SYSTEM FROM FIRE PROTECTION UNIT 2 MAKE-UP WATER (SEE NOTE 13)
INJECTION LINE 4520 TO CWP 2-2 MECH SEAL WASH PUMPS SCREEN PIPING (TYP)
EMBEDDED MTR COOLERS FROM CWP 2-2 26 NOTE R-0109 29 NOTE NOTE 29 TYP 4 PLCS SEPARATORS CYCLONE 28 NOTE 29 NOTE 27 NOTE 26 NOTE DISCH 2-1 CWP NOTE 17 27 NOTE R-0187 TO FLOOR DRAIN TYGON HOSE NOTE 22 RV-1076 TE 36 S-7091-?
5 S-7090-?
V V
D 1422 1423 1403 1401 1418 1388 1406 1419 1423 PCV 1422 PCV ANI 149 TI-742 TI-742A NOTE 30 TI-742A IS SPARE.
- 30. TI-742 IS A DUAL ELEMENT T/C, TI-742 & TI-742A.
SUMP 2-1 INTAKE STRUCTURE K
3/4 K
3/4 K
3/4 K
3/4 235 90 95 96 52A-C 102017 S-7092-?
S-7090-?
S-7091-?
1420 1421 FI 224 FI 225 11 NOTE R-0107 NOTE 5 B-0104 NOTE 6 R-0107 NOTE 5 B-0102 R-0107 S
E 01-30-2024 01-30-2024 N/A 6
0 3 Size 108017-6-0.dgn 108017-6-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 108017 UNIT 2 101 HCV-107 NOTE 24 S/C 17-2185 (OR EQUIV) 78-2930, WITH 3/4" NPT X HOSE COUPLINGS,
- 22. 3/4" FLEX HOSE, SYNFLEX 3130-12, S/C DIFFERENT MATERIALS.
- 24. SEE ISOMETRIC 230290 FOR
- 2. FOR RUBBER EXPANSION JOINTS SEE DC 663323-1.
- 1. ALL PIPING ON THIS SHEET ARE PG&E CLASS 'E' UNLESS OTHERWISE NOTED.
EXCEPT AS NOTED.
- 3. VENT AND DRAIN VALVES WITH PG&E VALVE NOS ARE 3/4" IN SIZE AND MULTIVARIABLE INST. SYSTEM DWG 108036, SH'S 31B AND 31C.
- 4. USED FOR CARDOX FIRE PROTECTION SYSTEM, PG&E RECORD NO DC-663086 60-C COMPATIBLE WITH FABRICATION MATERIAL OF COOLER.
VENT AND DRAIN VALVES (R-0107), UPSTREAM MATERIAL SHALL BE
- 5. USE BRONZE OR BRASS NIPPLES ON DOWNSTREAM SIDE OF INTAKE COOLER 61-C 62-C
- 7. INTAKE COOLER HEAD TANK 2-1 DC 663020-1
- 8. 3"\\ CAMLOK COUPLING
- 9. 10" CHECK VALVE, CENTERLINE, MODEL #10C06067F5 CHECK VALVE WITH LINING
- 10. DOW PLASTIC PIPING PRODUCTS 8"-FIG 355
- 11. PUMP IS LOCATED IN UNIT 1 INTAKE BAY.
- 12. FOR 6" AND 8" PVC PIPING SEE DWG 515969.
CWP 2-1.
FOR DEMUSSELING ONLY. THIS TIE-IN DOES NOT EXIST ON WATERBOX DRAIN TO CWP 2-2 LINE 4520 IS USED
- 13. HOSE CONNECTION FROM INTAKE COOLER 2-1 INLET 6"\\ SCH 40 C.S. PIPE SUCTION BAY TO CWP 2-1SUCTION BAY VIA 6" FLEXIBLE HOSE &
- 6. ADDITIONAL 6" OUTLET TO DIVERT WATER DISCHARGE FROM CWP 2-2 62-C 60-B 61-B 60-C 60-B
-B 60/61
- 14. 3/4" LADISH GATE VALVE, FIG NO 8252
- 15. 8" ASAHI 150# AV GATE VALVE, TYPE C.
- 16. 6" ASAHI BUTTERFLY VALVE U-PVC SERIES EPDM.
- 19. BALL VALVE (WHITEY-4456)
- 20. KEYSTONE FIG. 122
- 18. WHITEY/SWAGELOK SS-45S8 67-D 60-C 60-C ALTERNATIVE SOURCE WILL SUPPLY WATER TO BOTH CWP'S MECH SEALS.
TO CWP 2-1 SEAL DURING DEMUSSELING ONLY. IN-SERVICE PUMP AS
- 17. 3/4" FLEX HOSE CONNECTION IS FOR ALTERNATE WATER SUPPLY SOURCE 68-A
-B 67/68 67-B
-E 61/62 REMOVE LOOSE COATING AND FEATHER EDGES OF WELL-BONDED COATING.
FOR DETAIL. IF BIOX INTERNAL COATING IS DEGRADED, NO REPAIR REQUIRED.
- 21. PORTIONS OF THIS PIPING ARE "S13" SPEC. SEE PIPING ISOMETRIC 61-C 60-C NOTES (CONT'D)
- 25. BALL VALVE, APOLLO #70-140-01
- 28. USE TP316 INSTEAD OF TP304, IF AVAILABLE MOD.4726K12 (STR's 61A & 61B)
CARR, MODEL 4726K39 (STR 61),
- 26. BALL VALVE, BRONZE,THD-McMASTER COMPONENTS ISOLATE THE BRONZE STRAINERS FROM BRASS PIPE OR BUSHINGS OR PVC PIPE NIPPLES MAY BE USED TO
- 29. FOR STRAINERS STR-61, 61A, AND 61B INSULATING (OR EQUIV)
- 23. 3/4" BALL VALVE, STAINLESS STEEL, S/C 75-7197 60-D 64-D 60-E 60-E 62-C 61-B 68-B (STR's 61A & 61B)
BRAIDED VINYL, 1 1/4 " (STR 61), 1"
- 27. TUBING (FLEX), NALGENE 980 CLEAR 68-A 68-B 68-B
- 31. SEE RPE 8*5286 FOR ALTERNATE REPLACEMENT VALVE.
68-B NOTE 31 NOTE 31 0-912 0-911 SADDLE 8"x1" 101 1
Revised Per DFT-7*6122 FXC2 V
V V
D 101 1
101 1
101 1
101 1
101 1
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
185A-A 36 186A-A 36 186A-A 36 187A-A 36 TI 707 K
K-2483-11/2 K-11/4 DIELECTRIC UNION S/C 77-0979 11/2X11/4 UNION DIELECTRIC S/C 77-0979 TI 706 K
K-11/4 D
K-2481-11/2 11/2X 11/4 STR 62 PI 854 PI 277A E
S2 PI 277B STR 62B STR 62A PI 276B PI 276A S2 E
R-0109 R-0109 R-0109 R-0109 R-0109 R-0109 R-0109 R-0109 NOTE 4 34-B E-1 1/2" B
E E
B E
E 1/2" 1/2" 1/2" E-1 E-1 E-11/4 E-11/2 S
E E
B E
B NOTE 7 8
NOTE B
E E
R-0109 R-0109 E-1 E-1 30-A E-1 E-11/2 8
NOTE NOTE 7 3/4" B
E 11/4" 11/4" 3/4" 8
NOTE NOTE 7 B
E 21/2" 11/4" E-4520-2 2-2 CWP DISCHARGE NOTE 9 NOTE 9 E
S S
E S
S 1/2" A
E D
C B
A E
D C
B
-B 66A
-B 66A
-C 67A
-B 68A
-B 68A
-B 67A FI 2022 60A 61A 62A 63A 64A 65A 66A 67A 68A 69A MOTOR COOLING SYSTEM CIRCULATING WATER PUMP 2-2 (REFER TO SH 6 FOR CWP 2-1 SYS) 10 NOTE 10 NOTE 10 NOTE SALTWATER SYSTEM DRAIN TO FLOOR 1362 1365 936 NOTE 11 3/4
-E 62A 5049 TI V-0672 V-0672 G-0627 G-0627 TE 52
-C 65A T2428A TI-743 TI-743A NOTE 12 01-30-2024 01-30-2024 N/A 0
3 Size 108017-6A-0.dgn 108017-6A-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 108017 UNIT 2 6A 69
- 5. WHITEY/SWAGELOK SS-45S8 65A/66A-B/C NOTES:
- 6. BALL VALVE (WHITEY-4496)
- 12. TI-743 IS A DUAL ELEMENT T/C, TI-743 & TI-743A. TI-743A IS SPARE.
STRAINERS FROM BRASS PIPE OR COMPONENTS.
OR PVC PIPE NIPPLES MAY BE USED TO ISOLATE THE BRONZE
- 10. FOR STRAINERS STR-62, 62A, AND 62B INSULATING BUSHINGS
- 9. USE TP316 INSTEAD OF TP304, IF AVAILABLE 11/4" (STR 62), 1" (STR's 62A & 62B)
- 8. TUBING (FLEX), NALGENE 980 CLEAR BRAIDED VINYL, MODEL 4726K12 (STR's 62A & 62B)
- 7. BALL VALVE, BRONZE, THD-McMASTER CARR MODEL 4726K39 (STR 62),
-B 65A UNLESS OTHERWISE NOTED.
- 1. ALL PIPING ON THIS SHEET ARE PG&E CLASS 'E' SYS DWG 102036 SHTS 31B & 31C RECORD NO DC 663086 AND MULTIVARIABLE INST
IN-SERVICE PUMP AS ALTERNATE SOURCE WILL SUPPLY WATER SUPPLY SOURCE TO CWP 2-2 SEAL DURING DEMUSSELING ONLY
- 4. 3/4" FLEX HOSE CONNECTION IS FOR ALTERNATE WATER
-B 67A 3/4" IN SIZE EXCEPT AS NOTED.
- 2. VENT AND DRAIN VALVES WITH PG&E VALVE NOS ARE
- 13. SEE RPE 8*5286 FOR ALTERNATE REPLACEMENT VALVE.
NOTE 13 NOTE 13 NOTE 13 NOTE 13
-D 66A
-D 62A V
V V
V D
69 1
69 1
69 1
69 1
69 1
69 1
Revised Per DFT-7*6122 FXC2 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
A E
D C
B A
E D
C B
30 31 32 33 34 35 36 37 38 39 4080 3/4 S
S G1 G
?
G E 35-D 38-D INSTALLED UNDER SPEC. 8711.
- 6. VALVES ITEM NOS. 61 ARE UNDER SPEC. 8729 AND
- 5. DELETED.
- 4. ALL PIPING ON THIS SHEET IS PIPING "K", EXCEPT AS NOTED.
SPEC. 8831 AND WITH ** INDICATE UNDER SPEC. 8724.
- 1. VALVE ITEM NOS 34 & 79 ARE UNDER SPEC. 8729 AND 37-C NOTES:
UNIT 1 FUEL HANDLING BLDG FIREWATER PUMPS DC-663085-1
-D 167 16
-B 164 16 16 166-D FIRE PROTECTION SYSTEMS (UNIT-1 ONLY)
DC663085-77 FL EL 85'-0", AREA L SPRINKLER SYSTEM AUX BOILER ROOM AX BOILER BLDG SPRINKLER SYS (SEE DC6002114-1)
FIG 68 KENNEDY PGE VENDOR 10 2
K 3832 2 K 2121 2 12A 7A 5
9A 0-1,SC-30 SAMP. COOLER PACK. BOILER
-B 35 06 3641 2 2990 4 FW-105-A20-1 5036 4 1704 4 4552 2 5037 2 FW-105-A19 A53-1 FW-120-A52-1 FW-145-G G1 3642 2 2989 4 TO CAL LAB 7089 2 1617 1618 NOTE 11 NOTE 11
- 11. CONNECTOR W/CAP.
FP-0-4 AND THE ADJACENT PIPE PER SAPN 50317868.
- 12. MINIMUM CLEARANCE OF 0.010" IS REQUIRED BETWEEN THE STEM OF
- 10. KEYSTONE 8" BUTTERFLY VALVE, 150# FIG. 100, DC-6011479-156.
POWHATAN PRESSURE RESTRICTING VALVE 18-255 OR EQUIV.
- 9. ALL HOSEREELS HAVE RESTRICTING ORIFICES (REF DWG 060831) OR SERT/STEM/DISC-13CR WP-800, TEMP-850° F) COORD-31/33-D.
- 8. BONNEY FORGE 2" SW GATE VALVE CAT #HCW-108 (BODY A-105,
- 7. EXPANSION JOINT SHALL BE REPLACED BY STRAINER DURING START-UP.
37-D 4"
1" 4"x 2" LOCAL SAMPLE LOCAL SAMPLE SINK EL.100 AUX BLDG 2831 4 EVAPORATOR DISTILLATE FILL 0-1 F.W. & TRANSFER TANK FW COMPARTMENT COMPARTMENT TRANSFER 1"
DC 663071-253 NOTE 14 SEE NOTE 13 SEE
- 13. NOZZLE PLUGGED INSIDE TANK
- 14. NOZZLE CAPPED INSIDE TANK G-0219 K
3/4 DRAIN PLANT YARD G1 G G
23-D PX 141 PI 648 PI 614 0-1 RV-27 PS 107A 0-2 RV-28 PX 142 G
G1 PI 649 D
D FE 232 0-236 6"
STRAIGHTENING PLATE 0-304 3/4" G
G1 G
E PS 103A G
E 1-100 0-235 3/4" 0-302 PI 615 FI 503 155E-E 34 152E-E 34 3/4 S-1/4 S-1/4 S-1/4 S-1/4 RO 385 FI 502 0-1614 0-1613 0-1611 0-1612 0-369 G
C G
C 3831 3 K
3830 3 K
0-4 K
S13 0-1467 K
S13 K
S13 0-5 34 0-313 K
S13 0-307 0-306 0-1631 V
0-6 0-7 0-367 0-368 0-366 0-10 0-11 S13 TYP OF 2 RO 386 0-371 S13 TYP OF 2 0-234 0-16 0-303 0-305 0-40 0-41 0-1635 D
3/4 0-370 0-12 0-15 0-13 MAKE-UP WATER TRANSFER PP 0-2 0-372 0-373 0-1634 V
0-14 G
E K
S13 0-1633 V
K S13 0-18 0-17 K
S13 2659 6 S13 2660 8 S13 2660 10 S13 2661 6 S13 2656 8 S13 2657 8 S13 2658 6 S13 2655 8 S13 2654 8 S13 4550 8 S13 1753 S13 S13 3
S13 2827 3 S13 2826 3 S13 S13 2682 12 2659 6 S13 1407 1740 D
G C
G D
1" RUN "M" YARD LOOP 13 3833 3 K
0-2 TRANSFER PP.
MAKE-UP WTR (NOTE 7)
EXPANSION JOINT (TYP) 61 61 G
G1 90 1
50-E AUX BLDG UNITS 1 & 2
-B 117 16 SUCT CROSS-TIE FIREWTR PPS RESV DISCH &
RAW WTR STG NOTE 1 NOTE 10 NOTE 15 NOTE 6 NOTE 10 K -
4 FLUIDIC TECHNIQUES DWG 663187-216
- 15. FLOW STRAIGHTENING PLATE, VENDOR 0-1522 0-1523 V
V 90 1
06-29-2023 06-29-2023 N/A 3
0 3 Size 102018-3-0.dgn 102018-3-0.dgn ZNS4 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 Revised Per DFT-7*5906 102018 UNIT 1 90 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
TURBINE BLDG. UNIT 1 DWG.517052 AND CAS FACILITY ELEV. 140' (SPEC 8711)
OFFICES AT FS 185 FS 33 HIA NOTE 8 3
BEARING NUMBER:
DC-663086-137 DELUGE SYS.
MAIN TURB.BRG.
204 FCV 205 FCV 206 FCV 207 FCV FS 19 HIA CHEM.LAB.
SECONDARY DC-663086-81 8
FLOW SWITCH 5139 8
43
-B FCV-201 FS 34 HIA FS 32 HIA DC-663086-77 ELEV.140'-0" OFFICE SHIFT CLERK'S NOTE 7 FS 31 HIA NOTE 7 FS 30 HIA DC-663086-79 MACHINE SHOP ROOM L.O. RESERV.
AREA EAST OF FS 15 HIA FS 16 HIA FS 12 HIA FS 13 HIA FS 48 8711 SPEC DC-693299-1 VENT FAN ROOM 4KV SWGR EL.104' DC-693299-1 CORRIDOR DIESEL GEN 5140 8 ROOM BATTERY DELETED DELETED SPEC.
-E 40A
-D 45A
-E 48A A
E D
C B
A E
D C
B NOTE 5 203 FCV H
FACILITY (UNIT 1) 140' MM CREW 2
NORTH SYS.
SOUTH SYS.
EL.85' EL.119' AREA SECURITY HOLDING EL.140' 1506 CCW. HT. EXCH.
CCW. HT. EXCH.
CCW. HT. EXCH.
STAIRS AREA GEN.BUSHING M-S-R 2A M-S-R 1B FW. PP. HATCH M-S-R 1A FW. HTR. 1C FW. HTR. 1A,B N.E. OF HTR. 1C COND. COOLER MAIN STEAM LEADS MAIN STEAM LEAD BELOW H-P. TURBINE FW.HTR.2-A,B,C FW.HTR.2-A,B,C VENT FAN SEAL OIL UNIT CONDENSATE PUMP CNDS.BOOSTER PP.
CNDS.PP.HATCH 1
A E
D C
B A
E D
C B
40A 41A 42A 43A 44A 45A 46A 47A 48A 49A 5
3 FW.HTR.2-A,B,C STAIRS 4
J 1428 1624 1427 FIRE PROTECTION SYSTEMS 4
3 H1 K
DC-663086-79 EL.123' OWCC 1-112 (NOTE 10)
FCV-200 1-114 (NOTE 10)
- 10. PORTIONS OF PIPING INSTALLED TO SPEC "H1"
- 9. REPLACEMENT PIPING INSTALLED TO SPEC "H1" 1-117 (NOTE 10)
(TYP.4 PLCS)
(NOTE 9)
- 7. INST. REPAIR RM., OWCC, AUTOMATIC FIRE SPRINKLERS SYS.
WET & DELUGE CNDS.BOOSTER PP.
1-154 1-153 1-152 1-151 51 1
05-21-2024 05-21-2024 N/A 0
3 Size 102018-4A-0.dgn 102018-4A-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 102018 UNIT 1 4A 51 140' EL.
TRAILER FXC2 Revised Per DFT-7*6273 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
N/A 2
0 3 Size 108018-2-0.dgn 108018-2-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 108018 UNIT 2 46 Revised Per DFT-7*6065 NOTES 26-D 26-D 26-D UNDERGROUND VALVE: FU 29-B
- 1. LEGEND: ACP ASBESTOS CEMENT PIPE FIRE HYDRANT: FH FIREWATER HOSEREEL: FW POST INDICATOR ISOLATION VALVE: FP (TYP. OF 2)
(DWG. 438145)
BY CIVIL UNIT 2 BLDG FUEL HANDLING 3722 6
K 57-E K
G1 UNIT 2 STRUCTURE CONTAINMENT FW-YL20 FH-10 RUN "J"-12"ACP NOTE 4 C\\
B\\
A\\
SPARE 500 KV MAIN TRANSFORMERS
- 22 TRANSF.
AUX.
25 KV
- 22 12 KV TRANSFORMER START-UP STAND-BY RUN "J3"-8"ACP 212 STR 262 PS FCV-212 TRANSFORMER START-UP SPARE STAND-BY G1 K
(TYP. OF 4)
(DWG. 438145)
BY CIVIL 6"
10" 3995 10 K
49-A NOTE 3 (TYP. OF 6)
(TYP. OF 6)
SPEC. 8711 UNIT 2 45-A K 3988 10 6"
10" 1383 POS YARD LOOP 05 DRYER AIR PLANT SERVICE AIR (PADS)
COOLING WATER FOR TEMPORARY USE ONLY D
D D
NOTES (CONT.)
26-D REFERENCE DRAWINGS:
FIREWATER HOSEREEL STATION DETAILS: 064358 AND 064359 DURING OUTAGES.
COOLING WATER FOR AIR-DRYER 0-5 AFTERCOOLER
- 4. TEMPORARY CONNECTION FROM HYDRANT PROVIDES GATE VALVES ARE CRANE 150#, 47-1/2"
- 3. CHECK-VALVES ARE CRANE 150#, 147-1/2" TRANSFORMER DELUGE SYSTEM: DC-663086-113, 115, 222, 227 & 229 223,224, INTAKE STRUCTURE 2-1 2-2 UNIT 2 MAY BE TRANSITIONED TO PIPE SPEC "H1" PER PIPE SPEC "K" NOTE 6.
DELUGE STRAINER INLET FLANGE WAS ORIGINALLY PIPE SPEC "K" BUT AFTER THE CIVIL "K" SPEC PIPING IS NO LONGER EMBEDDED AND THE (PER SPEC 8724). THE PIPE SEGMENT BETWEEN THE FIRST FLANGE IS INSTALLED TO PIPE SPEC "H1" WITH "H1" NOTE 1 LIMITATIONS STRAINER INLET FLANGE UPSTREAM OF FCVS 212, 213, AND 214 AND DELUGE SYSTEM. THE TRANS DELUGE SYSTEM PIPING STARTS AT THE INSTALLED TO PIPE SPEC "K" (PER SPEC 8831) EXCEPT THE TRANS
- 2. ALL OUTDOOR PIPING AND VALVES ON THIS SHEET ARE BY CIVIL AND 46 1
A E
D C
B A
E D
C B
20 21 22 24 23 25 26 27 28 29 11-15-2023 11-15-2023 FIRE PROTECTION SYSTEMS FXC2 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
N/A 4
0 04-25-2024 3 Size 108018-4-0.dgn 108018-4-0.dgn ZNS4 04-25-2024 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 108018 UNIT 2 41 Revised Per DFT-7*6214 A
E D
C B
A E
D C
B 40 41 42 43 44 45 46 47 48 49 FIRE PROTECTION SYSTEMS (NOTE 6)
G-0119 2-1053 41 1
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
N/A 6
0 05-15-2024 3 Size 102020-6-0.dgn 102020-6-0.dgn ZNS4 05-15-2024 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 102020 UNIT 1 57 PI 2515 PI 2506 PI 2507 S/C 71-7491 PI-329 FILTER H.P. AFTER J 11/2 J
NOTE 13 NOTE 13 2
PURIFICATION UNIT PORTABLE L/O CONNECTION FOR 14 NOTE NOTE 14 HYD TRIP VALVE SERVOMOTOR HYD TRIP VALVE SERVOMOTOR LI OIL COOLER OIL COOLER 16 LI-971 MFP LO RESV 1-2 LI-970 MFP LO RESV 1-1 NOTE 15 (TYP)
LVDT LVDT 245A PO (242A) 241A PO (243A)
(102036 SH.20I) 102036 SH.20H CONTROL SYSTEM FEEDPUMP SPEED 20 68B-C 68B-D 20 POWER UNIT HYDRAULIC NOTE 13 NOTE 13 NOTE 13 36 201L-A 36 203L-A VALVE SERVOMOTOR LOW PRESSURE GOVERNOR VALVE SERVOMOTOR HIGH PRESSURE GOVERNOR WALL OF TANK DRAIN (NOTE 13)
& VENT ACCUMULATOR NOTE 13 RO-13 SOLENOID OPERATOR L.P.STOP VALVE SV-139 SVL 20
- 14. WHITEY MODEL SS-45F8
- 15. WHITEY MODEL B-45F8, DWG 698106-26.
- 7. DELETED.
- 13. PROVIDED BY WOODWARD.
- 12. DELETED.
17 NOTE 16 NOTE 16 53 1
57 1
60-E 57 1
F1 235 F1 232 F1 231 IND.
SIGHT FLOW T1 533 T1 520 T1 518 IND.
SIGHT FLOW F1 21 F1 22 REF. SAPN 51237271.
- 16. VENDOR SUPPLIED ORIFICE WASHERS INSTALLED IN LINE.
A E
D C
B A
E D
C B
60 61 62 63 64 65 66 67 68 69 LUBE OIL DISTRIBUTION AND PURIFICATION SYSTEMS Revised Per DFT-7*6240 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
LUBE OIL DISTRIBUTION AND PURIFICATION SYSTEMS C
E D
B A
E D
C B
A 80 81 82 83 84 85 86 87 88 89 PS 140 INTERLOCK PRESSURIZED BEARING ALARM LOW STOP START &
PS 138 PS 139 HEATER 2 DRAIN TANK ONLY RV-219 TI 384 MOTOR PX 560 (NOTE 7)
(NOTE 8)
(NOTE 6) 2" SAFETY LOCK FILL CAP WITH HINGED COVER.
BOOSTER PUMPS USE 6"x10" REMOVABLE COVER AND PUMP USES 2" SAFETY LOCK FILL CAP; CONDENSATE FILL CAP HINGED COVER; HEATER 2 DRAIN TANK
- 5. FILL CONNECTIONS: CCW USES 2" SAFETY LOCK MORE DETAILS.
OF THE L.O. COOLER, SEE DWG 106720 SHT 9 FOR
- 6. RV-218 IS CONNECTED INTO THE SYSTEM UPSTREAM PUMP SYSTEM ONLY.
- 7. PX-560 IS FOR THE HEATER 2 DRAIN TANK L.O.
RESERVOIR.
- 8. FILTER IS OPTIONAL FOR HTR 2 DRAIN PUMP L.O.
THE EQUIP. VENDOR.
- 1. ALL PIPING AND INSTRUMENTS ARE FURNISHED BY WITH BEARING AUTOMATIC OILERS.
HEATER 2 DRAIN TANK PUMP MOTOR ARE EQUIPPED
- 2. COMPONENT COOLING WATER PUMP MOTORS AND SYSTEMS ARE DESIGN CLASS I.
- 3. COMPONENT COOLING WATER PUMP LUBE OIL EQUIPPED WITH FLEXIBLE HOSE.
- 4. CONDENSATE BOOSTER PUMPS DRAIN LINE NOTES:
PRE-APPROVED NMOD (A0551330).
OIL SUPPLY LINES MAY BE STAINLESS STEEL PER
- 9. CONDENSATE BOOSTER PUMP AND MOTOR BEARING LUBE 56 1
02-20-2024 02-20-2024 N/A 8
0 102020-8-0.dgn 102020-8-0.dgn FAZ1 1 Size FAZ1 FXC2 NOT REQUIRED PER CF3.ID5 102020 56 UNIT 1 Revised Per DFT-7*5997 1/4" BALL CHECK VALVE MOTOR BEARING R.O.
CHECK VALE OUTBOARD INBOARD OUTBOARD INBOARD SYSTEM LUBE OIL PUMP PUMP (ONLY)
BOOSTER CONDENSATE 1-1 1-2 1-3 320 322 324 321 323 325 872 874 876 871 873 875 56 2
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
PI 2515 PI 2506 PI 2507 PI-329 FILTER H.P. AFTER 13 NOTE NOTE 13 HYD TRIP VALVE SERVOMOTOR HYD TRIP VALVE SERVOMOTOR YS-25 FEED PUMP 2-2 MAIN OIL PP (2-1) 2-2 6040 (6039)
MAIN OIL PP EMERG. OIL PP (445)
TI-434 OIL RESV. DEMISTER TO F.W. TURBINE 2-2 TURBINE 2-2, 2-1 EXCEPT AS NOTED.
- 1. THIS DRAWING SHEET IS TYPICAL FOR FEED PUMP SPECIFIED.
WESTINGHOUSE UNDER BID 8800, UNLESS OTHERWISE
- 3. ALL EQUIP., PIPING AND INSTRUMENTS SUPPLIED BY 68-C
- 13. WHITEY MODEL SS-45F8.
287A-A 33 NOTE 8 FEED PUMP OIL RESERVOIR 2-2 724J852 DC-663300-8 722J060 DC-663301-2 (2-1A) 2-2A (2-1B) 2-2B TACHOMETER PI 201
- 11. ACCUMULATOR SUPPLIED BY OILAIR, DC 663301-25.
FI 70 FI 25 TANK DRAIN WALL OF 36 205L-A (243A) 241A PO-(242A) 245A PO-(108036-20H) 108036-20I SYSTEM SPEED CONTROL FEEDPUMP UNIT POWER HYDRAULIC 20 68B-D 68B-D 20 NOTE 14 NOTE 14 NOTE 14 LVDT LVDT 36 208L-A NOTE 14 ACCUMULATOR NOTE 14
- 7. DELETED
- 12. DELETED SERVOMOTOR GOVERNOR VALVE LOW PRESSURE SERVOMOTOR GOVERNOR VALVE HIGH PRESSURE 850 BRG TI-491 TS-19 1
23 L80 PS-89 20 GVP-1 PS-86 63 K1737?
PS-85 FLTR HP OIL DUPLEX NOTE 6 63 63 SV-136 SV-135 SV-143 J 2 NOTE 15 J 11/2 NOTE 15 PURIFICATION UNIT PORTABLE L/O CONNECTION FOR
- 2BRG NOTE 16
- 16. WHITEY MODEL SS-45S8.
(11/2") BALL VLVS.
- 15. WHITEY MODEL S68TSW32P (2") & S-67TSW24P
- 14. PROVIDED BY WOODWARD.
67-C 66-C 65-E 64-A LI OIL COOLER OIL COOLER 16 17 NOTE 17 (TYP)
LI-970 68-A
- 17. WHITEY MODEL B-45F8, DWG 698106-26.
68-B LUBE OIL DISTRIBUTION AND PURIFICATION SYSTEMS A
E D
C B
A E
D C
B 60 61 62 63 64 65 66 67 68 69 53 1
- 18. TW-500, FWPT 2-1 ONLY.
61-D 61-C 201B-E 35
- 19. SEE FWPT 2-1 ONLY.
(NOTE 18)
(NOTE 19) 53 1
05-15-2024 05-15-2024 N/A 6
0 3 Size 108020-6-0.dgn 108020-6-0.dgn ZNS4 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 Revised Per DFT-7*6240 108020 UNIT 2 53 F1 235 F1 232 F1 231 NOTE 20 IND.
SIGHT FLOW T1 533 T1 520 T1 518 NOTE 20 IND.
SIGHT FLOW
- 20. VENDOR SUPPLIED ORIFICE WASHERS INSTALLED IN LINE. REF. SAPN 51237271.
60-E 53 1
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
C E
D B
A E
D C
B A
80 81 82 83 84 85 86 87 88 89 LUBE OIL DISTRIBUTION AND PURIFICATION SYSTEMS RO 321 RO 320 44 1
WITH BEARING AUTOMATIC OILERS.
HEATER 2 DRAIN TANK PUMP MOTOR ARE EQUIPPED
- 2. COMPONENT COOLING WATER PUMP MOTORS AND DESIGN CLASS I.
- 3. COMPONENT COOLING WATER PUMP LUBE OIL SYSTEMS ARE FLEXIBLE HOSE.
- 4. CONDENSATE BOOSTER PUMPS DRAIN LINE EQUIPPED WITH EQPT. VENDOR.
- 1. ALL PIPING AND INSTRUMENTS ARE FURNISHED BY THE SPECIFICATION "S" PER PRE-APPROVED NMOD (60097810).
LUBE OIL SUPPLY LINES MAY BE PG&E PIPING
- 5. CONDENSATE BOOSTER PUMP AND MOTOR BEARINGS NOTES:
83-D T1-60 T 2529A 02-20-2024 02-20-2024 N/A 8
0 108020-8-0.dgn 108020-8-0.dgn FAZ1 1 Size FAZ1 FXC2 NOT REQUIRED PER CF3.ID5 108020 45 UNIT 2 Revised Per DFT-7*5997 1/4" BALL CHECK VALVE MOTOR BEARING R.O.
CHECK VALE OUTBOARD INBOARD OUTBOARD INBOARD SYSTEM LUBE OIL PUMP PUMP (ONLY)
BOOSTER CONDENSATE 2-1 2-2 2-3 320 322 324 321 323 325 857 861 859 856 860 858 45 1
45 2
45 3
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
DIESEL ENGINE-GENERATOR ASSOCIATED SYSTEMS STR 68 PI 593 PX 269 PI 596 F
PI 597 PS 597 0-2 GALLONS 50,000 0-1 J-2581-21/2 62 62 4X21/2 4"
43 43 D
D DC-663087-2,3 43 43 V
V DC-663319-6 DC-663319-7 0-2 43 V
J-3092-21/2 J-11/2 RV-217 3X21/2 NOTE 9 NOTE 9 PCV-411 J-5166-2 11/2X3 77 39 J-2746-2 J-1 J-1 41 39 D
3X2 3X2 J-1/2 43 V
39 39 J-2599-2 J-4536-21/2 2X21/2 J-2584-2 NOTE 9 NOTE 9 C E J-5911-11/2 NOTE 10 25
-B J-4537-21/2 DC 663009-2 TRANSFER FILTERS DIESEL FUEL OIL DC 663083-1 TRANSFER PUMPS DIESEL FUEL OIL LS 261
-D 297 33 HIA VAULT WATER STR 67 PI 592 PX 268 PI 594 F
PI 595 PS 595 0-1 3X21/2 J-2580-21/2 62 4X21/2 4"
43 43 D
D DC-663087-2,3 43 43 V
V DC-663319-6 DC-663319-7 0-1 43 V
J-3091-21/2 J-11/2 RV-216 3X21/2 11/2X3 77 39 J-2745-2 J-1 J-1 41 39 D
3X2 3X2 J-1/2 43 V
-D 297 33 HIA VAULT WATER FE 161 J-5165-2 39 NOTE 5 410 PCV NOTE 9 NOTE 9 NOTE 9 NOTE 9 39 J-2583-2 J-2 J-2582-21/2 62 J-2584-2 11 NOTE 11 NOTE NOTE 10 J-5910-11/2 2X21/2 J-2597-2 J-2597-2 LCV-90 11/2 J-2596-2 J-2596-2 LCV-87 11/2 1-3 LS 210 LS 211 J-2591-2 J-2591-2 LCV-89 11/2 J-2590-2 J-2590-2 LCV-86 11/2 1-2 LS 206 LS 207 J-2589-2 LCV-88 11/2 J-2588-2 LCV-85 11/2 1-1 LS 202 LS 203 J-2589-2 J-4535-2 NOTES:
1.
EXCEPT AS NOTED ALL PIPING ON THIS SYSTEM SHALL BE PG&E CLASS,
C 2.
3.
BE UNDER SPEC 8729 (DWG 102039) UNLESS NOTED ALL VALVES ON THIS SHEET WITH PG&E ITEM NOS. SHALL
- 4. DELETED
- 5. BLIND FLANGE CONN FOR PUMP OUT AND PRIMING 6.
7.
8.
- 9. ITEM 5 P.O. 722732, DC 6006473-39
- 10. ITEM 4 P.O. 722732, DC 6006473-39 11.
- 12. DC 6011930-55, 2" BALL VALVE S/C 95-1193
- 13. DC 6011930-42, LCV-85 THRU LCV-90 14.
CORROSION PIPING IN THE DFO TRENCHES HAS BEEN COATED TO PREVENT 15.
HEADER A, CEL-503 FOR UNIT 1 HEADER B ROOMS. THE CABLES ARE TAGGED AS FOLLOWS: CEL-501 FOR UNIT 1 HEADER OF THE DGFO PIPING FROM THE PUMP VAULTS TO THE DG IS WATERPROOF BUT ABSORBS HYDROCARBONS IS ATTACHED TO EACH FOR THE PURPOSE OF LEAK DETECTION, A GORETEX CABLE WHICH 16.*
TUBING WITH PG&E SUPPLIED S-SPEC STAINLESS STEEL TUBING IT IS ACCEPTABLE TO REPLACE MANUFACTURER SUPPLIED INSTRUMENT DENOTES MANUFACTURER SUPPLIED INSTRUMENT AND EQUIPMENT.
17.
J-2588-2 J-4538-2 24
-B UNIT 2 J-4534-21/2 J-4533-21/2 21/2X2 (TYP OF 2)
NOTE 12 (TYP OF 6)
NOTE 12 (TYP 0F 6)
NOTE 13 CEL 501 CEL 503 104C-A 31 104C-A 31 NOTE 15 NOTE 15 V
K-2193-11/2 V
K-2192-11/2 V
K-2191-11/2 DC 663082-4 SEE SHEET 6 FOR ENGINE FUEL OIL SYSTEM OF BUILDING VENT TO OUTSIDE DC 663082-2 UNIT GENERATOR ENGINE-PART OF THE (TYP OF 3)
DIESEL FUEL OIL SYSTEM CIVIL DWGS 22-C 22-C 26-C 27-A 28-A NOTE 2 21-A 3X21/2 MECHANICAL DWG 508845 PUMP VAULT 1 BOUNDARY 22-B 23-C 26-C 27-C 27-C CEL 528 CEL 526 WATER HYDROCARBON 108C-A 31 107C-A 31 PUMP VAULT 2 BOUNDARY CEL 527 CEL 525 WATER HYDROCARBON 102C-A 31 101C-A 31 164L-A 34 21/2X2 (TYP 0F 6)
-B 297 33
-B 298 33 (TYP 0F 6) 11/2 11/2 11/2 11/2 11/2 11/2 PUMP HOSES HOOK-UP PROVISIONS FOR ENGINE DRIVEN FUEL OIL TRANSFER PORTABLE
- 18. LEAK DETECTORS INSTALLED AT LOW POINT IN MANHOLE 19.
CONTAINMENT BETWEEN TANK AND PUMP VAULT LEAK DETECTION CABLE INSTALLED ON BOTTOM OF SECONDARY FE 168 DIESEL FUEL OIL DAY TANKS 27-A 20.
SHELL. (BETWEEN FIBERGLASS AND OUTER METAL WALL OF TANK.
VACUUM GAUGES; PI-2517 IS FOR INTEGRITY OF OUTER FIBERGLASS 4"
LS 457 LS 458 HIA LOA PORTABLE CENTRIFUGE WATER REMOVAL CEL 523 CEL 519 CEL 521 WATER DETECTION CABLE PIPEWAY LEAK CEL 515 CEL 517 102D-A 31 CARBON HYDRO NOTE 18 101C-A 31 19 NOTE PI 2517 DEVICE PROTECT.
OVERFILL J-4 LT 266 292B-A 33 296A-A 33 CAP 1"
21/2x3 3x4 J-5122-3 FI 994 NOTE 11 J-3091-21/2 30" SECONDARY CONTAINMENT PIPE 30" SECONDARY CONTAINMENT PIPE VENT J-4 J-3 DISCHARGE RV J-4 J-4 LINE REMOVAL WATER J-1 SPACE INTERSTITIAL TANK TANK DWG 4015476 DIESEL F.O. STG UNDERGROUND NOTE 20 107D-A 31 MANHOLE PORT SAMPLING 6"
2"CAP MANHOLE F.O.TRANSFER PUMP PORTABLE DIESEL 4x2 CONNECTION DIP STICK FILL AND E
A B
C D
E A
B C
D 20 21 22 23 24 25 26 27 28 29 WATER CARBON HYDRO 438134 (RUN F & K)
CIVIL PIPING, SHOWN ON DWGS 438165, 438166 AND DELETED DELETED 4"
LS 459 LS 460 HIA LOA PORTABLE CENTRIFUGE WATER REMOVAL CEL CEL 520 CEL 522 WATER DETECTION CABLE PIPEWAY LEAK CEL 516 CEL 518 105D-A 31 CARBON HYDRO NOTE 18 101C-A 31 19 NOTE PI 2518 DEVICE PROTECT.
OVERFILL J-4 LT 268 297B-A 33 298A-A 33 CAP 1"
21/2x3 3x4 J-5123-3 FI 994 NOTE 11 J-3092-21/2 30" SECONDARY CONTAINMENT PIPE 30" SECONDARY CONTAINMENT PIPE VENT J-4 J-3 DISCHARGE RV J-4 J-4 LINE REMOVAL WATER J-1 SPACE INTERSTITIAL TANK TANK DWG 4015476 DIESEL F.O. STG UNDERGROUND NOTE 20 107D-A 31 MANHOLE PORT SAMPLING 6"
2"CAP MANHOLE F.O.TRANSFER PUMP PORTABLE DIESEL 4x2 CONNECTION DIP STICK FILL AND WATER CARBON HYDRO EXPANSION JOINT AS PER RPE #P-8259 21-B 21-D NOTE 17 NOTE 17 DELETED DIESEL GENERATOR SYSTEM DIESEL FUEL OIL SYSTEM GALLONS 50,000 0-2 524 0-EJ3 0-EJ1 0-EJ2 0-EJ4 NOTE 21 NOTE 21 21.
BUT HAVE BEEN EVALUATED TO PRECLUDE SISI (REF.Q-LIST NOTE G-35)
THE OVERFILL PREVENTION DROP TUBE AND VALVE ARE DESIGN CLASS II 01-11-2024 01-11-2024 N/A 2
0 3 Size 102021-2-0.dgn 102021-2-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 Revised Per DFT-7*6014 102021 UNIT 1 & 2 68 INSULATED SPECTACLE FLANGE (TYP) 68 1
68 1
FXC2 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
TS 101 TS 102 TW 101 TW 102 1036 TI TS 94 TS 95 TW 94 TW 95 TS 104 TS 105 TW 104 TW 105 101 102 94 95 104 105 UNIT 1-1 UNIT 1-2 UNIT 1-3 SYM.
PS RO TCV TIS RV LS LI TI TI/TW HIGH J.W.TEMP.ALARM SWITCH/THERMOWELL HIGH J.W.TEMP.SHUTDOWN SWITCH/THERMOWELL TS/TW TCV-5 TS/TW J.W.TEMP.INDICATOR HEATER START SWITCH WATER COOLED TURBOCHARGER ENGINE DIESEL TANK EXPANSION DIESEL ENGINE-GENERATOR ASSOCIATED SYSTEMS C
E D
B A
E D
C B
A 80 81 82 83 84 85 86 87 88 89
[JWPIT]
612 PIT INDICATING TRANSMITTER PIT 212D-A 36 66 1
12-04-2023 12-04-2023 N/A 8
0 102021-8-0.dgn 102021-8-0.dgn ZNS4 1 Size ZNS4 NOT REQUIRED PER CF3.ID5 Revised Per DDN-2*2025 102021 66 UNIT 1 NOTE 8 45V1 S 3/8 FXC2 DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
60 61 62 63 64 65 66 67 68 69 LS 206 LS 205 LS 207 LS 204 PI 831 PI 625 PI 626 LI 314 LS 924 FI 314 S
RO 235 PIS 1021 2-1 DIESEL FUEL OIL DAY TANK FILTER PRIMARY TANK PRIMING FILTER SECONDARY ENGINE SYSTEM ON DIESEL FUEL INJECTION ENGINE DRIVEN BOOSTER PUMP HAND OPERATED PRIMING PUMP MAKE-UP PUMP MAGNETIC DRIVE (TIMER CONTROLLED)
C NOTE 3 (TYP. 2)
CONNECTIONS 4"SAMPLE (TYP.3 EA.)
CLEAN-OUT PORT 1"
(NOTE 5)
REFERENCE MFR. DWG. DC-663082-4
?"
?"
45V1 45V1 45V1 45V1
-3/4" TX 1031 3/4" FLEX HOSE C
NOTE 7 D
K-3/4" 1/2" FLEX HOSE E
K-3/4" NOTE 2 NOTE 10 E
C C
RV-267
-1/2 43 1/2" FLEX HOSE K-1/2" 43 NOTE 11 NOTE 9 S
K 1/2" FLEX HOSE C
45V1
?"
1/2" 45V3 45V3
-?
-?
1/2" FLEX HOSE 3/4" NOTE 6 1/2" 1/2" TUBING
-1/2"
-?"
FLEX HOSE DC-663082-2
-?"
- -?"
- -?"
D D
1/2" FLEX HOSE
-?"
-1/2" PCV-82
- -?"
LOA K
S2 S2-3/4" S2-3/4" K-2192-11/2" K-3/4" NOTES:
(CAPPED)
SUCTION LINE ORIGINAL NOTE 11 SV-714
[ ] MANUFACTURER NO. IDENTIFICATION MANUALLY OPERATED USED ON INITIAL START ONLY SEE MANUFACTURER DWG. 663082-4 MOUNTED ON ENGINE CONTROL PANEL BY SUPPLIER UNDER SPEC.8735 WISMER AND BECKER VALVE TAG 45V1 SPECS ARE IN DWG 053479 OPEN 0 TO 100 RPM, CLOSED-ABOVE 100 RPM 1/2"FPT WHITEY BALL VALVE MODEL #SS-45F8
?"NUPRO PLUG VALVE MODEL #SS-6P4T WHITEY CO. SS-3NTRF4-A TANK FUEL OIL LEVEL PUMP AND TEE LOCATED AT SUCTION BELOW LOWEST DAY 1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
E VENT DAY TANK OVER-FLOW SIGHT HOSE 3/4"FLEX GLASS SIGHT CHECK 1/4"FLOAT CHECK 1/4"FLOAT (TYP. 6)
NOTE 12 NOTE 4
[FOPG]
ENGINE FUEL OIL SYSTEM 2-1
[LFLS]
LOA K2
[HFOLS]
S2-3/4" FLEX HOSE 11/2" S2-3/4" 63-B 60-D 67-D 66-C 62-D 64-C 69-D 65-B 62-B 61-E J-2590-2
-C 24/25 J-2591-2 C
K 63-C,65-B 3/4" FLEX HOSE K-1/2" 13 NOTE K
S2 LI 80 T.C.
FLEX HOSE 3/4" FLEX HOSE 1/2" T.C.
13.
60-B MANUAL VALVES PER DWG 6006473-222 S
- -3/4" 1-1/2" 40 C
K S2
-B 299 33 C
FLEX HOSE 1/2" D.R.
3/4" TUBING 14.
STAINLESS STEEL TUBING SUPPLIED INSTRUMENT TUBING WITH PG&E SUPPLIED S-SPEC EQUIPMENT. IT IS ACCEPTABLE TO REPLACE MANUFACTURER DENOTES MANUFACTURER SUPPLIED INSTRUMENTS AND E
A B
C D
E A
B C
D 296A-A 33 13.
60-B 15.
SEISMICALLY EVALUATED FOR HOSGRI.
CODE CLASS E PIPING IS QUALITY CLASS 'S' AND NOTE 15 NOTE 15 DIESEL ENGINE-GENERATOR ASSOCIATED SYSTEMS 16.
17.
HAVE A PLUG.
EAST AND WEST PRIMARY AND SECONDARY FILTER DRAINS NOTE 16 VENT NOTE 17 DRAIN NOTE 17 DRAIN NOTE 16 VENT HAVE A BLEEDER.
EAST AND WEST PRIMARY AND SECONDARY FILTER VENTS 18.
OF DAY TANK = ?"
DISTANCE FROM BOTTOM OF FOOT VALVE TO BOTTOM NOTE 18 62-D 04-02-2024 04-02-2024 N/A 6
0 3 Size 108021-6-0.dgn 108021-6-0.dgn ZNS4 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 Revised Per DFT-7*6186 108021 UNIT 2 50 50 1
D957578 1/2"VELAN GATE VALVE STOCK NO.
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
NOTES:
1.
2.
3.
4.
5.
7.
MOUNTED ON ENGINE CONTROL PANEL 6.
85-B 2-1 ENGINE DIESEL LS 229 LI 77 PS 230 PS 229 PS 228 HEAT EXCHANGER LUBE OIL ON ENGINE AFTERCOOLER RO 108 RADIATOR JACKET WATER RADIATOR JACKET WATER RO 109 TANK EXPANSION COOLED WATER TURBOCHARGER TI 1035 TIS 108 RO 90 ENGINE JACKET WATER COOLING SYSTEM 2-1 DC 663082-2 4"
FLEXHOSE 1?"
TUBING
?"
4"
?"
NOTE 4
[JWPS4]
NOTE 4
[JWPS3]
APS INT NOTE 3 45V1 45V1 5"
TUBING
?"
8 NOTE PS 227 TI 507 4"
D D
3/4" 3/4" 3/4" LINE DRAIN LINE BYPSS REDUCER 5"X4" REDUCER 5"X4" REDUCER 5"X4" 5
NOTE NOTE 4
[JWTG]
45V1 45V1 HIA
[JWT2]
VENT NOTE 7 RV-72 LOA
[JWLS]
[JWT1]
HIA NOTE 6 NOTE 6 FLEXHOSE FLEXHOSE TURBOVENT
[JWH]
GENERATOR UNITS THIS SYTEM PROVIDED COMPLETELY INSTALLED WITH ENGINE-
[ ] MANUFACTURER NUMBER ENGINE DRIVEN JACKET WATER PUMP 83-C 83-D & 86-B (VALVE SHOWN IN HOT POSITION)
MANUFACTURER TECHNICAL MANUAL DC-663082-80 SELF-CONTAINED CONTROL VALVE,FOR OPERATION SEE 87-B PENBERTHY N7B-STS TUBULAR GAUGE GLASS VALVES 84-C CAP WITH SPRING RELIEF FOR VENT/VACUUM 8.
LUNKENHEIMER MODEL #123 83-D TS 101 TS 102 11/4"FLEXHOSE
-?"
-5"
-2"
-4"
-4"
-4"
-5"
-4"
-?"
-3"
-3"
-1/2"
-5"
-2"
-1/2"T
-3/4"
-5"
-5" TCV 4
-5"
-5"
-5" REDUCER 5"X4"
- -?"
-?"
-?"
212D-C 35
[JWPS2]
INT
[JWPS1]
INT REFERENCE MFR. DWG. DC-663082-17 (NORTH)
(SOUTH)
[JWT3]
9.
STAINLESS STEEL TUBING SUPPLIED INSTRUMENT TUBING WITH PG&E SUPPLIED S-SPEC EQUIPMENT. IT IS ACCEPTABLE TO REPLACE MANUFACTURER DENOTES MANUFACTURER SUPPLIED INSTRUMENTS AND TW 507 161N-A 34 ELECTRIC HTR JACKET WATER TW 101 TW 102 E
A B
C D
E A
B C
D 80 81 82 83 84 85 86 87 88 89 NOTE 4
[JWPIT]
PIT 643 212D-B 36 DIESEL ENGINE-GENERATOR ASSOCIATED SYSTEMS 12-04-2023 12-04-2023 N/A 8
0 3 Size 108021-8-0.dgn 108021-8-0.dgn ZNS4 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 Revised Per DDN-2*2025 108021 UNIT 2 46 46 1
S-?"
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
NOTES:
1.
2.
3.
4.
5.
7.
MOUNTED ON ENGINE CONTROL PANEL 6.
2-2 ENGINE DIESEL LS 222 LI 76 PS 218 PS 217 PS 207 HEAT EXCHANGER LUBE OIL ON ENGINE AFTERCOOLER RO 106 RADIATOR JACKET WATER RADIATOR JACKET WATER RO 107 TANK EXPANSION COOLED WATER TURBOCHARGER TS 95 TI 1030 TS 94 TIS 107 ELECTRIC HEATER JACKET WATER RO 89 ENGINE JACKET WATER COOLING SYSTEM 2-2 DC 663082-2 4"
FLEXHOSE 1?"
TUBING
?"
4"
?"
NOTE 4
[JWPS4]
NOTE 4
[JWPS3]
APS INT NOTE 3 45V1 45V1 5"
TUBING
?"
8 NOTE PS 206 TI 506 4"
- -4 D
D 3/4" 3/4"
- -5 3/4" LINE DRAIN LINE BYPSS REDUCER 5"X4" REDUCER 5"X4" REDUCER 5"X4" 5
NOTE NOTE 4
[JWTG]
45V1 45V1 HIA
[JWT2]
VENT NOTE 7 RV-71 LOA
[JWLS]
[JWT1]
HIA NOTE 6 NOTE 6 FLEXHOSE FLEXHOSE TURBOVENT
[JWH]
GENERATOR UNITS THIS SYTEM PROVIDED COMPLETELY INSTALLED WITH ENGINE-
[ ] MANUFACTURER NUMBER ENGINE DRIVEN JACKET WATER PUMP 83A-D & 86A-B (VALVE SHOWN IN HOT POSITION)
MANUFACTURER TECHNICAL MANUAL DC-663082-80 SELF-CONTAINED CONTROL VALVE,FOR OPERATION SEE PENBERTHY N7B-STS TUBULAR GAUGE GLASS VALVES CAP WITH SPRING RELIEF FOR VENT/VACUUM 8.
LUNKENHEIMER MODEL #123 83A -C 87A -B 84A -C 85A -B 83A -D 11/4"FLEXHOSE
-5"
-4"
-4"
-2"
-2"
-4"
-1/2"T
-5"
-3/4"
-3"
-3"
-1/2" TCV 3
-5"
-5"
-5"
-5"
-5" REDUCER 5"X4"
-?"
-?"
-?"
-?"
-?"
212D-C 35
[JWPS2]
INT
[JWPS1]
INT REFERENCE MFR. DWG. DC-663082-17 (NORTH)
(SOUTH)
[JWT3]
9.
STAINLESS STEEL TUBING SUPPLIED INSTRUMENT TUBING WITH PG&E SUPPLIED S-SPEC EQUIPMENT. IT IS ACCEPTABLE TO REPLACE MANUFACTURER DENOTES MANUFACTURER SUPPLIED INSTRUMENTS AND TW 506 161N-A 34 TW 95 TW 94 E
A B
C D
E A
B C
D 80A 81A 82A 83A 84A 85A 86A 87A 88A 89A DIESEL ENGINE-GENERATOR ASSOCIATED SYSTEMS NOTE 4
[JWPIT]
12-04-2023 12-04-2023 N/A 0
3 Size 108021-8A-0.dgn 108021-8A-0.dgn ZNS4 ZNS4 FXC2 NOT REQUIRED PER CF3.ID5 Revised Per DDN-2*2025 108021 UNIT 2 8A 46 S-?"
RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
NOTES:
1.
2.
3.
4.
5.
MOUNTED ON ENGINE CONTROL PANEL 6.
2-3 ENGINE DIESEL LS 230 LI 78 PS 234 PS 233 PS 232 HEAT EXCHANGER LUBE OIL ON ENGINE AFTERCOOLER RO 110 RADIATOR JACKET WATER RADIATOR JACKET WATER RO 111 TANK EXPANSION COOLED WATER TURBOCHARGER TIS 109 ELECTRIC HEATER JACKET WATER RO 91 ENGINE JACKET WATER COOLING SYSTEM 2-3 4"
FLEXHOSE 1?"
TUBING
?"
4" NOTE 4
[JWPS4]
NOTE 4
[JWPS3]
APS INT NOTE 3 5"
TUBING
?"
PS 231 TI 508 4"
D D
3/4" 3/4"
- -5 3/4" LINE DRAIN LINE BYPSS REDUCER 5"X4" REDUCER 5"X4" 5
NOTE HIA
[JWT2]
VENT NOTE 6 RV-75 LOA
[JWT1]
HIA FLEXHOSE TURBOVENT
[JWH]
[ ] MANUFACTURER NUMBER ENGINE DRIVEN JACKET WATER PUMP CAP WITH SPRING RELIEF FOR VENT/VACUUM DC 6011476-43 S-?"
S-?"
C S-?"
C 11/4" FLEXHOSE S-?"
-3"
-3"
-5"
-2"
-1/2"T
-3/4" TS 104 TS 105 TI 1036
-2"
-4"
-4"
-5"
-4"
-4"
-5"
-5"
-5"
-5"
-5" TCV-5 S-?"
E C
E C
D D
D E
C
-4"
- -4" S-?"
S-?"
83B -C 87B -B 85B -B 212D-A 35 163Q-A 34 161Q-A 34 167N-A 34 161N-A 34 291A-A 33 S-1/2" 213B-D 35 217B-D 35 S-?"
83B-D,86B-D (TYP 3 PLCS) 1/2"DIA. 45V3
?"
[JWPS2]
INT
[JWPS1]
INT (VALVE SHOWN IN HOT POSITION)
MANUFACTURER TECHNICAL MANUAL DC-6011476-322 SELF-CONTAINED CONTROL VALVE,FOR OPERATION SEE REFERENCE MFR. DWG. DC-6011476-468 DC 6011476-338 GENERATOR UNITS [DC 6011476-73]
THIS SYTEM PROVIDED COMPLETELY INSTALLED WITH ENGINE-
- 7. *
[JWT3]
(NORTH)
(SOUTH)
NOTE 4 NOTE 4 RADIATOR JACKET WATER (WEST)
C STAINLESS STEEL TUBING SUPPLIED INSTRUMENT TUBING WITH PG&E SUPPLIED S-SPEC EQUIPMENT. IT IS ACCEPTABLE TO REPLACE MANUFACTURER DENOTES MANUFACTURER SUPPLIED INSTRUMENTS AND TW 508 TW 104 TW 105 X
X X
X X
X X
X E
A B
C D
E A
B C
D 80B 81B 82B 83B 84B 85B 86B 87B 88B 89B DIESEL ENGINE-GENERATOR ASSOCIATED SYSTEMS PIT 645 212F-A 36 46 1
05-23-2024 05-23-2024 N/A 0
3 Size 108021-8B-0.dgn 108021-8B-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 Revised Per DDN-2*2029 108021 UNIT 2 8B 46 C
E S 3/8 2-626 45V1 2-419 45V1 FXC2 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET
N/A 7
0 04-04-2024 102022-7-0.dgn 102022-7-0.dgn ZNS4 04-04-2024 1 Size ZNS4 BLF1 NOT REQUIRED PER CF3.ID5 102022 11 UNIT 1 Revised Per DDT-4*2459 C
E D
B A
E D
C B
A 70 71 72 73 74 75 76 77 78 79 TURBINE AND GENERATOR ASSOCIATED SYSTEMS WINDOW PER TME 60163056.
AT THE EXCITER HOUSING OBSERVATION
- 1. TEMPORARY SUPPORT STRUCTURE INSTALLED NOTES:
TMOD PER 60163057 11 1
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
DIABLO CANYON POWER PLANT - PG&E CO.
RASTER=
DGN=
CAD User:
Date:
1NPGIC REV PAGE DRAWING SHEET
TEMPORARY STRAINER PSI.
HYDROGEN PRESSURE - LOW" RANGE 0 TO 300 PRESSURE AND GIVES ALARM "GENERATOR TO 5 PSI ABOVE INLET STATOR WATER CLOSES WHEN THE GAS PRESSURE DECREASES DIFFERENTIAL PRESSURE SWITCH 35 100 PSI INLET WATER PRESSURE GAUGE RANGE 0 TO PRESSURE PURCHASER'S CONNECTION FOR INLET WATER TEST GAUGE - RANGE 0 TO 160 PSIG 178A-B 34 466B-B 32 466B-C 32 OPERATING RANGE 35 TO 50° C THERMOMETER RANGE 1 TO 110° C BLIND FLANGE PI-11 PS-7 FS-2 FS-1 TI-14 PI-10 PI-12 LS-4 LS-5 LS-6 0 TO 160 PSIG TEST GAUGE RANGE ALARM "WATER TANK LEVEL - HIGH" LEVEL ALARM SWITCH 26 GIVES IN TANK TO MAINTAIN PROPER WATER LEVEL DE-ENERGIZES SOLENOID VALVE SV-1 LEVEL SWITCH SV-W ENERGIZES AND ALARM "WATER TANK LEVEL - LOW" LEVEL ALARM SWITCH 27 GIVES OPERATION ONLY POSITION FOR STATOR COIL DRAINING REMOVABLE LINK "J" IN A FEED-THRU VACUUM CONNECTION INSTRUMENT AIR SUPPLY 496 497 498 499 450
-E 308 33 485 486 PRESSURE - HIGH" AND GIVES ALARM "WATER TANK IN WATER TANK REACHES 6 PSIG CLOSE WHEN HYDROGEN PRESSURE PRESSURE SWITCH 28 CONTACTS PS-9 457 447 442 458 459 460 445 446 444 454 461 512 0 TO 15 PSIG TEST GAUGE - RANGE PI-14 28 FOR PURGING VENT VALVE P
448 452 414 514 513 425 467 511 474 473 412 517 475 410 523 468 518 411 471 469 470 464 2 PSIG PRESSURIZATION OF WATER TANK SET AT AUTOMATIC PRESSURE REGULATOR "W" FOR PCV-148 HIGH LEVEL NORMAL LEVEL LOW LEVEL SIGHT LEVEL GAUGE LI-3 WINDOW RANGE 0 TO 150 PSIG - 30" HG WATER TANK PRESSURE GAUGE & VACUUM PI-15 TURBINE BLDG SUMP WATER TANK DRAIN TO "PUMP 1 STOPPED" ACTUATES PUMP "2" AND GIVES ALARM ACCROSS PUMP DECREASES TO 20 PSI CLOSES WHEN DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE SWITCH 21 PS-10 LOCK THIS VALVE IN THROTTLED POSITION "PUMP 2 STOPPED" ACTUATES PUMP "1" AND GIVES ALARM ACROSS PUMP DECREASES TO 20 PSI CLOSES WHEN DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE SWITCH 20 PS-11 STR-15 STRAINER TEST GAUGE RANGE 0 TO 160 PSIG EXCITER END TE-66 R.T.D.
-B 238 35 24 P
532 35 530 531 533 534 400 PRESSURE OPERATING DIFFERENTIAL SEE NAMEPLATE FOR NORMAL TURBINE END GAS DIAGRAM PRESSURE REGULATOR "2" - SEE HYDROGEN SUPPLY FROM HYDROGEN VALVE - SET AT 5 PSIG WATER TANK GAS PRESSURE RELIEF RV-94 PSIG TEST GAUGE RANGE 0 TO 160 MICROSIEMENS/CM OPERATING RANGE 0.5 TO 1.5 SIEMENS/CM RECOMMENDED CELL RANGE 0 TO 2 MICRO-INLET WATER CONDUCTIVITY INSTRUCTION NO. 5 CONDENSED OPERATING TRIP SCHEME, AS PER USED FOR GENERATOR THAN 1.5 MICROSIEMENS/CM AT CONDUCTIVITY GREATER INTERLOCK CONTACT CLOSES PX 329 PS 300 PI 340 PX 328 179 TX PI 21 PI-20 ANI-2 ANS-2A ANS-2C HI-TRIP" WATER INLET CONDUCTIVITY GIVES ALARM "STATOR COOLING 1.5 MICROSIEMENS/CM AND CONDUCTIVITY INCREASES TO INDICATOR CLOSES WHEN ALARM 36 CONTACTS IN 481 480 484 P
22 401 402 500 501 515 403 404 516 483 482 417 519 P
23 520 462 P
432 433 434 435 431 521 P
419 418 ORIFICE WATER FLOW 527 INTEGRATING FLOW METER FI-1 WATER FLOW - ON" GIVES ALARM "MAKE-UP CLOSES AT 5 PSIG AND PRESSURE SWITCH 23 PS-8 RO-98 FI-2 HEAT EXCHANGER - 2 HEAT EXCHANGER - 1 405 406 505 407 524 409 408 525 477 509 510 420 466 421 422
- 2
- 1 424 465 CARTRIDGES MIXED DEMINERALIZER 522 TANK WATER 29 30 31 P
P 488 490 489 P
VALVE NORMALLY OPEN QUICK OPENING VALVE VALVE NORMALLY CLOSED VALVE NORMALLY THROTTLED CHECK VALVE SOLENOID VALVE STOP CHECK VALVE OPEN DRAIN ORIFICE RELIEF VALVE FLOW LINE SENSING LINE DRAIN LINE PRESSURE GAUGE PRESSURE SWITCH CONDUCTIVITY CELL THERMOMETER ELECTRICAL CONNECTION STRAINER PLUG LEGEND WATER ALARMS 20 PUMP 2 STOPPED 21 PUMP 1 STOPPED 22 WATER FILTER PRESSURE DROP - HIGH 23 MAKE-UP WATER FLOW - ON 24 INLET WATER TEMPERATURE - HIGH 25 OUTLET WATER TEMPERATURE - HIGH 26 WATER TANK LEVEL - HIGH 27 WATER TANK LEVEL - LOW 28 WATER TANK PRESSURE - HIGH 29 STATOR COIL WATER FLOW - LOW 30 STATOR COIL WATER FLOW - VERY LOW 31 STATOR COIL WATER PRESSURE DROP - HIGH 32 STATOR COIL WATER INLET CONDUCTIVITY - HIGH 33 STATOR COIL WATER INLET CONDUCTIVITY - VERY HIGH 34 DEMINERALIZER OUTLET CONDUCTIVITY - HIGH 35 GENERATOR HYDROGEN PRESSURE - LOW CONDENSED OPERATING INSTRUCTIONS SEE INSTRUCTION BOOK FOR COMPLETE OPERATING AND FLUSHING INSTRUCTIONS WATER COOLING WATER COOLING INDICATOR FLOW P
21 P
P 20 186 RO 2104 K
1 K
2103 1
K 2101 1
203 FI K
288 1
1083 TI 8.
7.
6.
5.
4.
3.
2.
1.
FILLING INSTRUCTIONS FOR PRESSURIZATION OF WATER SYSTEM WITH HYDROGEN THROTTLE VALVE 419 TO MAINTAIN DESIRED CONDUCTIVITY.
CLOSE VALVES 402, 404, 406, 408, 422, AND 423.
ON INLET CONDUCTIVITY CELL "CC2".
CIRCULATE WATER THROUGH DEMINERALIZER UNTIL PROPER CONDUCTANCE IS OBTAINED OPEN VALVE 444.
START PUMP #1 OR #2 AND ADJUST WATER LEVEL IN WATER TANK TO NORMAL LEVEL.
DRAIN OFF EXCESS WATER UNTIL WATER LEVEL IS AT HIGH LEVEL IN SIGHT GLASS OPENING VALVE 511.
OPEN VALVES 447, 448, 458, AND 460 AND ADMIT HYDROGEN.
ADJUST PRESSURE REGULATOR "Z", ON GAS DIAGRAM, TO DELIVER HYDROGEN AT RANGE OF 3 TO 5 PSIG.
OPEN VALVES 78, ON GAS DIAGRAM, TO PROVIDE H} TO WATER SYSTEM.
CLOSE VALVES 444, 448, 459, AND 460.
INSTALL REMOVABLE LINK "H" AS SHOWN ON GAS DIAGRAM.
11.
10.
9.
8.
7.
6.
5.
4.
3.
2.
1.
NOTES 61-C 232A-B 35 54-E TE-67 R.T.D.
84 THERMOCOUPLES LOCATED RADIALLY IN STATOR COIL WATER DISCHARGE HEADER. THEY ARE CONSECUTIVELY NUMBERED TI-1083 TO TI-1130 AND TI-230 TO TI-265.
PG&E PIPING THIS SHEET - PG&E CLASS ALL CONDUCTIVITY CELLS ARE TEMPERATURE CONDENSATED TO 25°C. ALL CONDUCTIVITY CELLS ARE CONNECTED TO INDICATORS WITH DUAL RANGES OF 0 TO 2 AND 0 TO 20 MICROSIEMENS/CM.
FOR OUTLINE SEE DC-663292-10.
THERMOWELLS TW-67 AND TW-82 ARE SEAL WELDED TO THE PIPING.
TW-67 /
NOTE 5 TW-82 NOTE 5 237B-A 35 TT-82 TS-2 231D-C 35 167Z-D 34 165Z-D 34 161Z-D 34 0 TO 100 GPM FLOW GAUGE RANGE DEMINERALIZER WATER 163Z-D 34 TS-1 TT-81 NOT TO EXCEED 50°C PSIG. MAX TEMPERATURE OR BE LESS THAN 75 EXCEED 700 PSIG PRESSURE NOT TO HOUSE DEMIN. INLET BOILER FEED SYSTEM OR WATER MAKE-UP FROM SV-1 VALVE WATER CONTROL MAKE-UP 526 ANS-1A HIGH". SEE NOTE 3.
ALARM "DEMINERALIZER OUTLET CONDUCTIVITY-INCREASES TO 1.5 MICROSIEMENS/CM AND GIVES RECORDER CLOSE WHEN CONDUCTIVITY INSTRUCTIONS. ALARM 34 CONTACTS IN ADJUST FLOW PER CONDENSED OPERATING OPERATING RANGE 0.1 TO 0.4 MICROSIEMENS/CM.
RANGE 0 TO 2 MICROSIEMENS/CM. NORMAL DEMINERALIZER FLOW CONDUCTIVITY CELL S
P CC RETURN TANK 2-1 SYSTEM MISC. CONDENSATE RETURN TO HOUSE FILTERS PI-16 PI-17 FI-23 FLOW INDICATOR S
-E 307 33 CC CC1 CEL-3 ANR-3 ANS-3
-C 117 31 QUICK OPENING VALVE TURBINE GENERATOR 232A-E 35 PI-13 430 CAPPED G-0627 TO ATMOSPHERE SEPARATE VENT
-B 238 35 CC2 CC CEL-2
-D 111 31 57-E 02 CNDS. SYS.
STATOR COIL COOLING WATER DIAGRAM ABANDONED IN PLACE 650 FE 467C-A 32 E
STATOR COIL WATER DIFFERENTIAL PRESSURE GAUGE - RANGE 0 TO 50 PSI OR 0 TO 60 PSI A
E D
C B
A E
D C
B 59 58 57 56 55 54 53 52 51 50 560 V
541 540 544 P
PI-18 476 OF SCCW SKID LOCATED OFF SCCW PUMPS PP 2-1 PP 2-2 TI-13 OPERATING RANGE 40 TO 80°C THERMOMETER RANGE 0 TO 110°C TURBINE AND GENERATOR ASSOCIATED SYSTEMS PSIG 90 SET AT PRESSURE RELIEF VALVE 06-06-2024 06-06-2024 N/A 5
0 3 Size 108022-5-0.dgn 108022-5-0.dgn ZNS4 ZNS4 NOT REQUIRED PER CF3.ID5 108022 UNIT 2 47 455 423 539 OPEN VALVE 431 UNTIL A FULL STREAM OF WATER FLOWS OUT OF VALVE 512. CLOSE VALVE 431 AND 512.
509.
OPEN MOMENTARILY AND CLOSE VALVE 470, 474, 481, 485, AND 486. THROTTLE VENT VALVE 477, 505, 501, 500, 510, AND SHOULD NOT EXCEED GENERATOR GAS PRESSURE. CLOSE VALVE 431.
START EITHER PUMP #1 OR PUMP #2 AND CONTINUE TO VENT SYSTEM. WATER PRESSURE AT PUMP DISCHARGES SYSTEM BY OPENING VALVE 431. FILL SYSTEM UNTIL A FULL STREAM OF WATER FLOWS FROM VALVE 512.
OPEN VALVES 402, 404, 406, AND 408. ADMIT WATER FROM BOILER FEED SYSTEM OF HOUSE DEMINERALIZER WATER OPEN 424, CLOSE 420, 421, 422, AND 423.
509, AND 510 TO FILL DEMINERALIZERS.
- 423, OPEN 420, 421, 422, CLOSE VALVE 78 ON GAS DIAGRAM.
REMOVABLE LINK "H". WHICH IS LOCATED ON THE GAS DIAGRAM.
OPEN VALVE 512. CLOSE 448, 424, AND 400, AND BOLT ON BLIND FLANGE. CLOSE 498 AND 499, AND DISCONNECT WATER TEMPERATURE - HIGH".
F AND GIVES ALARM, "INLET 122° WHEN TEMPERATURE INCREASES TO AUXILIARY PANEL. ALARM CLOSES ALARM SWITCH 24 IN GENERATOR THERMOCOUPLE TO THERMOCOUPLE PRESSURE DROP - HIGH" GIVES ALARM "STATOR COIL WATER PSID AND 30 PRESSURE INCREASES TO CONTACTS CLOSE WHEN THE DIFFERENTIAL DIFFERENTIAL PRESSURE SWITCH 31,
NOTE 6 GENERATOR RUNBACK IS INITIATED. SEE PSID A SECOND CONTACT CLOSES AND A 18 DIFFERENTIAL PRESSURE DECREASES TO "STATOR COIL WATER FLOW VERY LOW". WHEN PSID A CONTACT CLOSES AND GIVES ALARM 20 DIFFERENTIAL PRESSURE DECREASES TO DIFFERENTIAL PRESSURE SWITCH 30 WHEN NOTE 6 A GENERATOR RUNBACK IS INITIATED. SEE PSID, A SECOND CONTACT CLOSES AND 18 TO WHEN DIFFERENTIAL PRESSURE DECREASES ALARM "STATOR COIL WATER FLOW - LOW".
PSID A CONTACT CLOSES AND GIVES 22 DIFFERENTIAL PRESSURE DECREASES TO DIFFERENTIAL PRESSURE SWITCH 29, WHEN 22 22 52B-D 52B-D GAS PRESSURE PURCHASER'S CONNECTION FOR GENERATOR DISCHARGE PIPING, SEE DWG. 108022-5B FOR PARALLEL RING AND BUSHING 54B-D 22 22 55B-D 2
7057 8 2
7045 6 571 413 8
2
- 7044 D
472
- 7052 11/2 2
D 570 2-572 8
7043 2
8"x6" REDUCER (2 PLCS) 6 THE UNIT BE TRIPPED. REFER TO THE TURBINE INSTRUCTION BOOK FOR TURBINE LIMITS ON AUXILIARY LOAD OPERATION.
ABOVE INSTRUCTIONS PROVIDING NO OTHER OPERATING CONDITION ON THE TURBINE OR GENERATOR REQUIRES THAT OPERATION OF THE GENERATOR WITHOUT STATOR COIL WATER CIRCULATION IS PERMISSIBLE AS OUTLINED IN THE DRASTICALLY INCREASE THE STATOR COIL WATER CONDUCTIVITY.
CARE SHOULD BE TAKEN TO PREVENT CO} FROM COMING INTO CONTACT WITH WATER SINCE ITS PRESENCE WILL GENERATOR MUST BE PRESSURIZED WITH GAS BEFORE WATER FILLING OR CIRCULATION IS STARTED.
INCREASES 3 PSI ABOVE THE NORMAL PRESSURE DROP, REPLACE THE FILTER.
ONE FILTER IS NORMALLY IN SERVICE; THE OTHER HELD AS A SPARE. WHENEVER PRESSURE DROP ACROSS THE FILTER ON CONDUCTIVITY METER "CC1" INCREASES TO 1.5 MICROHMOS/CM AT 25°C WITH CONSTANT FLOW RATE.
BE CHANGED BY ALTERNATING THE POSITION OF VALVE 419. REPLACE DEMINERALIZER BED WHENEVER THE INDICATION DEMINERALIZER FLOW RATE AS REQUIRED TO MAINTAIN LOOP CONDUCTIVITY AS SPECIFIED AT "CC2". THIS FLOW MAY FLOW THROUGH THE DEMINERALIZER IS 50 GPM. TEMPERATURE OF WATER SHOULD NOT EXCEED 60°C MAXIMUM. SET ONE MIXED BED DEMINERALIZER IS NORMALLY IN SERVICE AT A TIME; THE OTHER BEING HELD AS A SPARE. MAXIMUM THE GENERATOR CAN CARRY 75% OF RATED STATOR AMPERES WITH ONE COOLER OUT OF SERVICE.
TO THE STATION AUXILIARY LOAD IN 21/4 MINUTES.
MANUAL RUNBACK MAY BE USED TO AVOID TRIP PROVIDED STATOR AMPERES CAN BE REDUCED 40% PER MINUTE DOWN RUNBACK WILL BE PULSED WITH AN ON-OFF CYCLIC RELAY TO ASSURE GRADUAL LOAD REDUCTION.
IF THE GENERATOR RUNBACK FAILS TO START IN 45 SECONDS, THE GENERATOR WILL BE TRIPPED. THE GENERATOR COME UP TO SPEED.) THE GENERATOR RUNBACK CAN BE ACCOMPLISHED AT A MAXIMUM RATE OF 200% PER MINUTE.
THROUGH A FIVE SECOND DELAY RELAY. (THE FIVE SECOND DELAY IS TO PERMIT ALTERNATE CIRCULATING PUMP TO IF THE WATER FLOW STOPS, THE SECOND CONTACTS ON SW29 AND/OR SW30 WILL INITIATE THE AUTOMATIC RUNBACK THE GENERATOR LOAD SHOULD BE REDUCED TO ZERO AND ITS EXCITATION REMOVED WITHIN THREE MINUTES.
INLET WATER DOES NOT EXCEED 1.5 MICROMHOS/CM. IF THE INITIAL CONDUCTIVITY EXCEEDS 1.5 MICROHMOS/CM, CARRY UP TO 15% OF RATED STATOR AMPERES FOR A MAXIMUM TIME OF ONE HOUR IF THE INITIAL CONDUCTIVITY OF WITHOUT STATOR COIL WATER CIRCULATION AND WITH THE COILS FILLED WITH WATER, THE GENERATOR CAN SAFELY THE STATOR IS ENERGIZED. EITHER PUMP IS CAPABLE TO PRODUCE NORMAL WATER FLOW.
STATOR COIL COOLING WATER SHOULD BE CIRCULATED WHENEVER THE GENERATOR IS CARRYING LOAD OR WHEN MACHINE GAS PRESSURE MUST BE MAINTAINED HIGHER THAN STATOR COIL INLET WATER PRESSURE.
THE GENERATOR CAN BE OPERATED AT ALL HYDROGEN PRESSURES BETWEEN MAXIMUM GAS PRESSURE AND 45 PSIG. THE SINCE CORROSION ACTIVITY WILL BE ACCELERATED IN THE PRESENCE OF ATMOSPHERIC OXYGEN.
THE SYSTEM MAY BE OPERATED WITHOUT HYDROGEN PRESSURIZATION. THIS MODE OF OPERATION IS NOT RECOMMENDED HYDROGEN PRESSURE BUILD UP IN EXCESS OF 5 PSIG IN THE WATER TANK.
HYDROGEN PRESSURE REGULATOR MAINTAINS THE HYDROGEN PRESSURE AT 2 PSIG. A RELIEF VALVE WILL PREVENT THE WATER SYSTEM IS PRESSURIZED WITH HYDROGEN ABOVE THE WATER LEVEL IN THE WATER TANK. AN AUTOMATIC 13.
12.
11.
10.
9.
8.
7.
6.
5.
4.
3.
2.
1.
"OUTLET WATER TEMPERATURE - HIGH" F AND GIVES ALARM 185° INCREASES TO PANEL. ALARM CLOSES WHEN TEMPERATURE SWITCH 25 IN GENERATOR AUXILIARY THERMOCOUPLE TO THERMOCOUPLE ALARM (TO ATMOSPHERE)
VENT COVER PT-10 2-573 PT-11 V
V PT-12 47 1
1.
2.
3.
4.
5.
6.
REPLACEMENT VALVE KEROTEST T-0N21-49-004 WITH STAINLESS STEEL INTERNALS.
-E 54/55 75 PSIG OUTLET REDUCING VALVE PCV-38 PRESSURE NOTE 6 463 51-A 47 1
RHS1 Revised Per DDT-4*2491 RASTER=
DGN=
Date:
CAD User:
DATE DWN RE IV PROFESSIONAL ENGINEER PE DISC.
PE#
PE EXP.
3NPGIC DIABLO CANYON POWER PLANT - PG&E CO.
REV PAGE DRAWING SHEET