ML21294A135

0 to Updated Final Safety Analysis Report, Questions 222

ML21294A135
Person / Time
Site:	Susquehanna
Issue date:	10/12/2021
From:	Talen Energy, Susquehanna
To:	Office of Nuclear Reactor Regulation
Shared Package
ML21294A245	List: ML21294A084 ML21294A085 ML21294A086 ML21294A087 ML21294A088 ML21294A089 ML21294A091 ML21294A092 ML21294A093 ML21294A094 ML21294A095 ML21294A096 ML21294A097 ML21294A098 ML21294A099 ML21294A100 ML21294A101 ML21294A102 ML21294A103 ML21294A106 ML21294A107 ML21294A108 ML21294A109 ML21294A111 ML21294A112 ML21294A113 ML21294A116 ML21294A117 ML21294A118 ML21294A119 ML21294A120 ML21294A121 ML21294A122 ML21294A123 ML21294A124 ML21294A126 ML21294A127 ML21294A128 ML21294A129 ML21294A130 ML21294A131 ML21294A132 ML21294A133 ML21294A134 ML21294A135 ML21294A136 ML21294A137 ML21294A138 ML21294A139 ML21294A140 ... further results
References
PLA-7935
Download: ML21294A135 (2)

Text

SSES-FSAR

QUESTION 222.1 Describe in detail how the feedwater line and recirculation line short-term mass and energy release rates, used in the annulus pressurization and loading calculations, were determined.

Provide, separately, as a function of time, the mass flux (lbm/sec/ft 2 ) and areas used for each side of the break (the reactor vessel side and the inventory or long pipe side). List all assumptions and conservatisms used. If a hand calculation was used for this analysis, document the work done.

RESPONSE

Refer to Appendix 6A for response.

Rev. 46, 06/93 222.1-1 SSES-FSAR

QUESTION 222.2 One second after a postulated steam line break, a quality less than 1.0 was assumed to exit the rupture.

This may provide the limiting containment pressurization, but may not provide the limiting containment temperature. Assuming 100\\

efficiency for the steam separators and dryers, provide the mass and energy release rates which would occur with a 1. 0 break quality. Show that this would not provide the limiting condition for the drywell and suppression pool temperature.

RESPONSE

FSAR Subsection 6. 2.1.1. 3. 3. 2 has been revised to provide this information.

Rev. 46, 06/93 222.2-1