ML21113A081
ML21113A081 | |
Person / Time | |
---|---|
Issue date: | 05/06/2021 |
From: | Margaret Audrain, Matthew Hiser, Amy Hull, Schneider A Office of Nuclear Regulatory Research |
To: | |
M. Audrian | |
Shared Package | |
ML21113A078 | List: |
References | |
Download: ML21113A081 (47) | |
Text
NRC WORKSHOP ON ADVANCED MANUFACTURING TECHNOLOGIES FOR NUCLEAR APPLICATIONS Part I - Workshop Summary RIL 2021-03 Date Published: Draft April 2021 Prepared by:
A. Schneider M. Hiser M. Audrain A. Hull Research Information Letter Office of Nuclear Regulatory Research
Disclaimer This report was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any employee, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for any third partys use, or the results of such use, of any information, apparatus, product, or process disclosed in this publication, or represents that its use by such third party complies with applicable law.
This report does not contain or imply legally binding requirements. Nor does this report establish or modify any regulatory guidance or positions of the U.S. Nuclear Regulatory Commission and is not binding on the Commission.
EXECUTIVE
SUMMARY
Advanced manufacturing technologies (AMTs) are defined by the U.S. Nuclear Regulatory Commission (NRC) as those techniques and material processing methods that have not been traditionally used or formally standardized/codified by the nuclear industry. In June 2020, the NRC released Revision 1 to the Agency Action Plan for AMTs (AMT AP) (Agencywide Documents Access and Management System Accession No. ML19333B980 (package)). The AMT AP is a strategic plan that responds to the rapid pace of developments in respective AMTs and industry implementation plans. The NRCs AMT activities are driven by industry interest in implementing specific AMTs and ensuring that the NRC staff are prepared to review potential AMT applications efficiently and effectively. The AMTs currently being evaluated include laser powder bed fusion, directed energy deposition, electron beam welding, powder metallurgy-hot isostatic pressing, and cold spray.
During December 7-10, 2020, the NRC hosted the Workshop on Advanced Manufacturing Technologies for Nuclear Applications. This public workshop was intended to broadly address potential industry use of AMTs, including the replacement/repair of components in operating nuclear power plants and in the initial construction of small modular and advanced reactors. The primary objectives of the workshop were to do the following:
Discuss ongoing activities related to AMTs, including nuclear industry implementation plans, codes and standards activities, research findings, and regulatory approaches in other industries.
Inform the public of the NRCs activities and approach to approving the use of AMTs.
Determine, with input from nuclear industry stakeholders and other technical organizations, areas where the NRC should focus to ensure the safe implementation of AMTs.
To support the objectives of the workshop, the NRC staff organized the following seven sessions:
Session 1: Practical Experience Related to Implementing AMTs Session 2: Plans and Priorities for AMT Implementation in Commercial Nuclear Applications Session 3: Performance Characteristics of AMT-Fabricated Components Session 4: Approaches to Component Qualification and Aging Management Session 5: Codes and Standards Activities and Developments Session 6: Regulatory Approaches for AMTs Session 7: Research and Development of AMTs These sessions were intended to broadly cover the range of AMT topics, emphasizing practical experience with and the application of AMTs. The staff solicited presentations from a range of national and international organizations, including vendors, utilities, the Electric Power Research
Institute, the Nuclear Energy Institute, the U.S. Department of Defense, the U.S. Department of Energy (including Department laboratories), the National Institute of Standards and Technology, the National Aeronautics and Space Administration, regulators (other U.S. Government and international), and universities. About 280 individuals from 80 organizations in 10 countries attended the workshop.
The workshop provided an opportunity to share information among U.S. and international counterparts on approaches to using AMTs. Participants agreed that, to support near-and medium-term use of AMTs in nuclear applications, industry and researchers should focus on developing data to support the qualification of additive manufacturing materials. These data can be used to support the development of codes and standards and provide a technical basis to support implementation. Initial use of AMTs in non-or low-safety-significant components may provide a path for their use in components of higher safety significance by building experience and confidence in the performance and properties of AMT components in representative environments. Combining this approach with innovative plans for inservice inspections and postservice destructive evaluation can further improve confidence in the performance of AMTs.
v CONTENTS
- 1. Introduction.............................................................................................................. 1 1.1 Background on Advanced Manufacturing Technologies................................... 1 1.2 Workshop Motivation and Objectives................................................................... 1 1.3 Workshop Organization and Participants............................................................ 2
- 2. Summary of Presentations.................................................................................... 11 2.1 Session 1: Practical Experience Related to Implementing AMTs.................... 11 Summary of Session 1............................................................................................. 12 2.2 Session 2: Plans and Priorities for AMT Implementation in Commercial Nuclear Applications............................................................................................. 13 Summary of Session 2............................................................................................. 14 2.3 Session 3: Performance Characteristics of AMT-Fabricated Components.... 15 Summary of Session 3............................................................................................. 18 2.4 Session 4: Approaches to Component Qualification and Aging Management
................................................................................................................................. 19 Summary of Session 4............................................................................................. 20 2.5 Session 5: Codes and Standards Activities and Developments...................... 21 Summary of Session 5............................................................................................. 22 2.6 Session 6: Regulatory Approaches for AMTs.................................................... 24 Summary of Session 6............................................................................................. 25 2.7 Session 7: Research and Development of AMTs.............................................. 25 Summary of Session 7............................................................................................. 27
- 3. Summary and Conclusion..................................................................................... 28 Appendix A Workshop Attendees and Presenter Biographies Appendix B Workshop Slides
vi ABBREVIATIONS AND ACRONYMS Term Description 3D three dimensional ADAMS Agencywide Documents Access and Management System AM additive manufacturing AMC Additive Manufacturing Consortium AMT advanced manufacturing technologies AMT AP Advanced Manufacturing Technologies Action Plan ANL Argonne National Laboratory ARL Army Research Laboratory ASME American Society of Mechanical Engineers ASTM ASTM International (formerly American Society for Testing and Materials)
AWS American Welding Society CFR Code of Federal Regulations CS cold spray DED directed energy deposition DED-AM directed energy deposition-additive manufacturing DOE U.S. Department of Energy DOE-NE DOE Office of Nuclear Energy EBW electron beam welding ENGIE French multinational electric utility company EPRI Electric Power Research Institute EU European Union EWI formerly known as Edison Welding Institute FAA U.S. Federal Aviation Administration FDA U.S. Food and Drug Administration GE General Electric Company HIP hot isostatic pressing INL Idaho National Laboratory LPBF laser powder bed fusion LWR light-water reactor NASA U.S. National Aeronautics and Space Administration NEI Nuclear Energy Institute NIST U.S. National Institute of Standards and Technology NNL U.S. Naval Nuclear Laboratory NPP nuclear power plant NRC U.S. Nuclear Regulatory Commission NRL U.S. Naval Research Laboratory NUCOBAM NUclear COmponents Based on Additive Manufacturing ORNL Oak Ridge National Laboratory PM-HIP powder metallurgy-hot isostatic pressing PNNL Pacific Northwest National Laboratory
vii Term Description SCC stress-corrosion cracking SLM selective laser melting SRNL Savannah River National Laboratory STUK Finnish Radiation and Nuclear Safety Authority TCR Transformational Challenge Reactor VTT Valtion Teknillinen Tutkimuskeskus (English translation Finnish Technical Research Centre)
1
- 1. Introduction This research information letter summarizes the presentations and discussions during the Workshop on Advanced Manufacturing Technologies for Nuclear Applications, organized by the U.S. Nuclear Regulatory Commission (NRC). This public workshop took place virtually December 7-10, 2020, using a combination of WebEx and Microsoft Teams due to the ongoing Coronavirus Disease 2019 (COVID-19) pandemic.
1.1 Background on Advanced Manufacturing Technologies The NRCs mission, in part, is to license and regulate the Nations civilian use of radioactive materials in the United States. Advanced manufacturing technologies (AMTs) include techniques and material processing methods that have not traditionally been used in the U.S. nuclear industry or that have yet to be formally standardized by the nuclear industry (e.g., through nuclear codes and standards, or through other processes resulting in NRC approval or endorsement). In response to significant industry interest in the use of AMTs for commercial nuclear applications, the NRC has taken several steps in recent years to prepare the NRC staff to review industry submittals and regulate activities in this area.
In June 2020, the NRC released Revision 1 to the Agency Action Plan for AMTs (AMT AP)
(Agencywide Documents Access and Management System (ADAMS) Accession No. ML19333B980). The AMT AP is intended to be a strategic plan that responds to the rapid pace of developments in respective AMTs and industry implementation plans. Revision 1 identified completed activities from the initial AMT AP (ADAMS Accession No. ML19029B355) and defined new and ongoing activities to better focus and organize NRC efforts related to AMTs. The NRCs activities on AMTs are driven by industry interest in implementing specific AMTs to ensure the NRC staff is prepared to review potential AMT applications efficiently and effectively. These AMTs include laser powder bed fusion (LPBF), direct energy deposition (DED), electron beam welding (EBW), powder metallurgy-hot isostatic pressing (PM-HIP), and cold spray (CS). In the future, the NRC intends to address additional specific AMTs as needed, based on industry interest and plans for implementation.
1.2 Workshop Motivation and Objectives One activity identified in Revision 1 of the AMT AP was to organize and host a public workshop on AMTs. In November 2017, the NRC hosted a similar workshop, entitled Additive Manufacturing for Reactor Materials and Components. A broad range of organizations participated, including those from the nuclear industry, nonnuclear industry, regulators, and international organizations. The NRC documented the workshop summary in NUREG/CP-0310, Proceedings of the Public Meeting on Additive Manufacturing for Reactor Materials and Components, issued July 2019. This workshop provided valuable information and insights into industry interests and plans as well as the maturity and level of readiness for the inclusion of AMTs in nuclear applications.
Given the rapid pace of AMT development, the NRC determined that another workshop would be timely to receive updates on industry plans and technological developments. The staff intended the June 2020 workshop to broadly address potential industry use of AMTs, including replacement/repair of components in operating nuclear power plants and in the initial construction of small modular and advanced reactors. The NRC must be prepared to regulate
2 and respond to industry submittals efficiently and effectively and potentially approve the use of AMTs in applications related to both operating and future plants.
The primary objectives of the workshop were to do the following:
Discuss ongoing activities related to AMTs, including nuclear industry implementation plans, codes and standards activities, research findings, and regulatory approaches in other industries.
Inform the public of the NRCs activities and approach to approving the use of AMTs.
Determine, with input from nuclear industry stakeholders and other technical organizations, areas where the NRC should focus to ensure the safe implementation of AMTs.
1.3 Workshop Organization and Participants To support the objectives of the workshop, NRC staff members organized the following session topics based on their awareness of the AMT landscape and insights from discussions with external stakeholders:
Session 1: Practical Experience Related to Implementing AMTs Session 2: Plans and Priorities for AMT Implementation in Commercial Nuclear Applications Session 3: Performance Characteristics of AMT-Fabricated Components Session 4: Approaches to Component Qualification and Aging Management Session 5: Codes and Standards Activities and Developments Session 6: Regulatory Approaches for AMTs Session 7: Research and Development of AMTs These sessions were intended to broadly cover the range of AMT topics, with an emphasis on practical experience and application of AMTs. The staff solicited presentations from a range of national and international organizations, including vendors, utilities, the Electric Power Research Institute (EPRI), the Nuclear Energy Institute (NEI), the U.S. Department of Defense, the U.S. Department of Energy (DOE) (including DOE laboratories), the National Institute of Standards and Technology (NIST), the National Aeronautics and Space Administration (NASA),
regulatory bodies (i.e., other U.S. Government and international regulatory bodies), and universities. Table 1-1 lists the organizations that presented during the workshop, and Table 1-2 presents the final workshop agenda.
Table 1-3 indicates the presenters, their company or agency, and the general topic(s) covered by their presentation during the workshop.
Approximately 280 individuals from 80 organizations in 10 countries attended the workshop.
Appendix A contains a list of participants. Attendees interacted with presenters by posing questions through the WebEx chat or by accessing a separate Microsoft Teams link following
3 each presentation that was created to support further discussions. Chapter 2 of this report provides summaries of each presentation and each session. Appendix B contains the presentation slides for the entire workshop.
In addition to the full listing of slides in Appendix B, presentation files are publicly available in ADAMS at the following accession numbers:
Session 1: ML20339A649 Session 2: ML20342A032 Session 3: ML20342A371 Session 4: ML20344A010 Session 5: ML20344A111 Session 6: ML20344A421 Session 7 (and additional slides from Sessions 3, 4, and 6): ML20345A155 additional slides from Sessions 3 and 5: ML20351A159 Table 1-1. Participating Organizations Organization Country Link America Makes US https://www.americamakes.us/
ANL US https://www.anl.gov/
ARL US https://www.arl.army.mil/
ASTM International US https://www.astm.org/
ENGIE France https://www.engie.com/en EPRI US https://www.epri.com/
EWI US https://ewi.org/
Exelon US https://www.exeloncorp.com/
FDA US https://www.fda.gov/home Framatome France https://www.framatome.com/EN/home-57/index.html GE US https://www.ge.com/
Kairos Power US https://kairospower.com/
NASA US https://www.nasa.gov/
NEI US https://www.nei.org/
NNL US https://navalnuclearlab.energy.gov/
NRC US https://www.nrc.gov/
NRL US https://www.nrl.navy.mil/
4 Organization Country Link Rolls-Royce United Kingdom https://www.rolls-royce.com/
SRNL US https://srnl.doe.gov/
Siemens Germany https://www.siemens.com/
STUK Finland https://www.stuk.fi/
UES Inc US https://www.ues.com/
University of Wisconsin US https://www.wisconsin.edu/
U.S. Naval Academy US https://www.usna.edu/homepage.php U.S. Navy US https://www.navy.mil/
VRC Metal Systems US https://vrcmetalsystems.com/
VTT Finland https://www.vttresearch.com/en Westinghouse US https://westinghouse.com/
5 Table 1-2. Workshop Agenda Day 1 (December 7, 2020)
Time Presentation Topic OrganizationPresenter 8:00 AM Opening of Workshop NRCR. Furstenau 8:15 AM Q&A/Discussion NRCM. Hiser Session 1: Practical Experience Related to Implementing AMTs 8:30 AM NRC Public Workshop on Advanced Manufacturing Technologies for Nuclear Applications NRCM. Hiser &
M. Yoo 8:45 AM Siemens Gas and PowerOverview of Additive Manufacturing, Benefits and Challenges Industrial Approach for AM SiemensP. Advovic 9:15 AM BREAK 9:25 AM Experience with AM and Related Nuclear Applications ENGIES. Nardone &
A. Claes 10:10 AM Rolls-Royces Introduction of HIP Nuclear Components Rolls-RoyceJ. Sulley 11:00 AM BREAK 11:10 AM Cold Spray Technology and Experience in Army Applications ARLM. Siopis 11:40 AM Additive Manufacturing Efforts in Support of U.S. Navy Fleet U.S. NavyJ. Rettaliata 12:10 PM Q&A/Discussion 12:30 PM LUNCH Session 2: Plans and Priorities for AMT Implementation in Commercial Nuclear Applications 1:15 PM Industry Perspectives on AMTs NEIH. Lane 1:45 PM Vision of AMT Use in the Nuclear Industry EPRIM. Albert 2:15 PM BREAK 2:25 PM Utility Perspective on Implementing AMTs in LWRs ExelonL. Friant 3:00 PM Westinghouse Advanced Manufacturing Development and Implementation Efforts Westinghouse C. Armstrong 3:40 PM BREAK 4:10 PM Potential Applications, Challenges and Progress of Framatome Additive Manufacturing Application FramatomeC. Wiltz 4:40 PM AMT with Advanced Materials in Nuclear Operations PNNLR. Oelrich
6 Day 2 (December 8, 2020)
Time Presentation Topic OrganizationPresenter 8:00 AM Introductory Remarks NRCR. Taylor Session 3: Performance Characteristics of AMT-Fabricated Components 8:10 AM Rolls-Royces Introduction of AM Nuclear Components Rolls-RoyceD. Poole &
W. Press 8:55 AM Fatigue and Mechanical Properties of Laser Power Bed Fusion 316L Stainless Steel NNLS. Attanasio 9:25 AM BREAK 9:40 AM Impact of Powder Supply Variation on Microstructure and Properties in Additive Manufactured Alloy 718 NASAC. Kantzos 10:10 AM Elucidating the Effect of Feedstock Powder Spheroidization Treatment on Selective Laser Sintered Additively Manufactured 316L Stainless Steel U.S. Naval Academy R. Santucci & E. Getto 10:40 AM BREAK 10:50 AM Linking 3D Microstructural Analysis of Additive Manufactured 316L to Performance and Properties NRLD. Rowenhorst 11:20 AM The Effects of Post-Processing on Mechanical Properties and Corrosion Behavior of AM 316L Stainless Steel NRLR. Fonda 11:50 AM LUNCH 12:40 PM Process Validation for AM at the FDA FDAD. Porter 1:10 PM Technical Assessments of AMTs NRCM. Audrain 1:40 PM Q&A/Discussion 2:10 PM BREAK 2:20 PM PM-HIP and Electron Beam Welding Development for Nuclear Applications EPRID. Gandy 2:50 PM Cold Spray Process Details and Nuclear Applications PNNLK. Ross and J. Lareau 3:20 PM BREAK 3:30 PM Cold Spray Mitigation and Repair for Nuclear Applications VRC Metal Systems K. Johnson 4:00 PM Laser Glazing of Cold Sprayed Coatings for the Mitigation of Stress Corrosion Cracking in LWR Applications ANL & UES, Inc.
B. Alexandrenau & A.K. Rai 4:30 PM Q&A/Discussion
7 Day 3 (December 9, 2020)
Time Presentation Topic OrganizationPresenter 8:00 AM Introductory Remarks NRCL. Lund Session 4: Approaches to Component Qualification and Aging Management 8:10 AM AM Thimble Plugging Device/Advanced Debris Filtering Bottom Nozzle Implementation Process WestinghouseD. Huegel 8:40 AM Approach for 316L LPBF Code Case and Data Package Westinghouse & EPRI C. Armstrong & D. Gandy 9:10 AM BREAK 9:20 AM Certification of the First Powder Bed Fusion Component in a US Naval Nuclear Propulsion Plant NNLT. White 10:00 AM On the Development of Fatigue and Damage Tolerance Framework for Metal AM Parts FAAM. Gorelik 10:30 AM BREAK 10:40 AM Accelerating Quality Certification of Critical Components with Additive Manufacturing ORNLV. Paquit 11:10 AM Inservice Inspection and Considerations for AMT Components PNNLJ. Harrison 11:40 AM Q&A/Discussion 12:00 PM LUNCH Session 5: Codes and Standards Activities and Developments 12:45 PM Overview of America Makes Activities America Makes B. Ribic 1:10 PM Standards Landscape for Additive Manufacturing NISTS. Moylan 1:40 PM BREAK 1:50 PM ASME Criteria for Powder Bed Fusion Additive Manufacturing SRNLG. Rawls 2:20 PM Approach to Codifying New Manufacturing Methods GE & EPRIB. Frew &
D. Gandy 2:50 PM BREAK 3:00 PM Recent Advancements on ASTM Additive Manufacturing Research and Standardization ASTM International M. Seifi 3:30 PM NASA Standard for Use of AM in Crewed Spaceflight Applications (NASA-STD-6030)
NASAD. Wells 4:00 PM Development of AWS D20.1 Standard NNLJ. Coughlin 4:30 PM Q&A/Discussion
8 Day 4 (December 10, 2020)
Time Presentation Topic OrganizationPresenter 8:00 AM Introductory Remarks NRCA. Bradford Session 6: Regulatory Approaches for AMTs 8:10 AM NRC Regulatory Approach for AMTs NRCC. Fairbanks 8:35 AM STUK Regulatory Approach for AMTs STUKP. Valikangas 9:05 AM BREAK 9:15 AM FDA Regulatory Approach for AMTs FDAM. Di Prima 9:45 AM Regulatory Considerations for AM and Lessons Learned for Structural Alloys FAAM. Gorelik 10:15 AM Q&A/Discussion 10:40 AM BREAK Session 7: Research and Development of AMTs 10:50 AM Quality Control Tools for Metal AM and EU NUCOBAM Project VTTP. Puukko 11:20 AM DOE Transformational Challenge Reactor Program ORNLK. Terrani 11:50 AM LUNCH 12:40 PM DOE-NE Advanced Manufacturing Methods Program Overview INLI. van Rooyen 1:10 PM Rapid Qualification of New Materials Using Modeling and Simulation ANLM. Messner 1:40 PM BREAK 1:50 PM Cold Spray Development for Coatings U. of Wisconsin & Kairos PowerK. Sridharan &
G. Young 2:20 PM In-Situ Process Measurements for Monitoring, Control, and Simulation of AM NISTB. Lane 2:50 PM BREAK 3:00 PM Additive Manufacturing Consortium EWIM. Barfoot 3:30 PM Q&A/Discussion 4:00 PM Workshop Wrap-Up and Conclusion
Table 1-3. Focus Areas for AMTs by Presentation Organization (Speaker)
LPBF DED CS PM-HIP EBW Other AMTs Nuclear Applications Other Non-NPP activity Irradiation Testing &
Effects Degradation in AMT components AMT Qualification Codes &
Standards Siemens (Advovic)
ENGIE (Nardone &
Claes)
Rolls-Royce (Sulley)
ARL (Siopis)
U.S. Navy (Rettaliata)
NEI (Lane)
EPRI (Albert)
Exelon (Friant)
Westinghouse (Armstrong)
Framatome (Wiltz)
PNNL (Oelrich)
Rolls-Royce (Poole &
Press)
NNL (Attanasio)
NASA (Kantzos)
USNA (Santucci &
Getto)
NRL (Rowenhorst)
NRL (Fonda)
FDA (Porter)
NRC (Audrain)
EPRI (Gandy)
PNNL (Ross &
Lareau)
VRC Metal Systems (Johnson)
ANL & UES, Inc.
(Alexandrenau & Rai)
Westinghouse (Huegel)
Organization (Speaker)
LPBF DED CS PM-HIP EBW Other AMTs Nuclear Applications Other Non-NPP activity Irradiation Testing &
Effects Degradation in AMT components AMT Qualification Codes &
Standards Westinghouse (Armstrong & Gandy)
NNL (White)
FAA (Gorelik)
ORNL (Paquit)
PNNL (Harrison)
America Makes (Ribic)
NIST (Moylan)
SRNL (Rawls)
Gandy)
ASTM International (Seifi)
NASA (Wells)
NNL (Coughlin)
NRC (Fairbanks)
STUK (Valikangas)
FDA (Di Prima)
FAA (Gorelik)
VTT (Puukko)
ORNL (Terrani)
INL (van Rooyen)
ANL (Messner)
U. Wisconsin &
Kairos (Sridharan &
Young)
NIST (Lane)
EWI (Barfoot)
11
- 2. Summary of Presentations DAY 1 PRESENTATIONS 2.1 Session 1: Practical Experience Related to Implementing AMTs 2.1.1 OpeningNRC Public Workshop on Advanced Manufacturing Technologies for Nuclear Applications (Presentation B1ML20336A004)
Presenters: Matthew Hiser and Mark Yoo, NRC This presentation introduced the workshop by covering AMTs, the AMT AP, and the workshop organization. First, the presentation provided a high-level background on AMTs, including describing the five primary technologies of interest to the NRC and potential applications of each. Next, the presenters discussed the AMT AP, which includes technical and regulatory preparedness projects, as well as communication and knowledge management activities, including this workshop. Finally, the presentation gave an overview of the workshop, including motivation, approach, sessions, and logistics.
2.1.2 Siemens Gas and PowerOverview of Additive Manufacturing, Benefits and Challenges Industrial Approach for AM (Presentation B2ML20339A650)
Presenter: Pajazit Advovic, Siemens This presentation gave a synopsis of Siemens Energys use of additive manufacturing (AM) and the implementation of additively manufactured components into the companys turbines.
Siemens early adoption of selective laser melting (SLM) and its experience developing the SLM technology and scaling its production for industrial use were detailed. This presentation included a review of SLM benefits and challenges as seen by Siemens, including an overview of Siemens actions to prove SLM capabilities and lead AM development. The presentation concluded with a case study of a three-dimensional (3D) printed clapper and clapper holders in use at a Slovenian nuclear power plant and Siemens perspective on the benefits this provides the nuclear community.
2.1.3 Experience with AM and Related Nuclear Applications (Presentation B3ML20339A651)
Presenters: Steve Nardone and Arne Claes, ENGIE ENGIE presented its experience with AM, and the development of its ENGIE AM Expertise Centre in late 2015, including ENGIEs actions to encourage industrialization, certify designs, improve nondestructive testing methods, and develop a greater understanding of gaps and potential solutions. It also included a discussion on Nuclear Components Based on Additive Manufacturing (NUCOBAM) Horizon 2020 Nuclear Fission and Radiation Protection Research, a project ENGIE is involved in that lasts until September 2024 to develop LPBF as a viable manufacturing method for the nuclear industry and to demonstrate its capabilities. The presentation concluded with an analysis of ENGIEs efforts to address gaps in quality assurance, reverse engineering, and certification.
2.1.4 Rolls-Royce's Introduction of HIP Nuclear Components (Presentation B4ML20339A652)
Presenter: John Sulley, Rolls-Royce This presentation covered Rolls-Royces historical use of PM-HIP, the techniques potential use for nuclear components, and a specific example examining low-alloy steel pressure vessels.
12 This included the benefits of PM-HIP and Rolls-Royces perspective on a pathway to introduce PM-HIP components into nuclear plants. The presenter also discussed an analysis of key gaps and potential risks in the process, including powder quality, can failure, cracking during quenching, and scaling limitations. Finally, the presenter explained progress in EBW and cited journal articles that contain further information.
2.1.5 Cold Spray Technology and Experience in Army Applications (Presentation B5 ML20339A653)
Presenter: Matthew Siopis, Army Research Laboratory This presentation covered the Army Research Laboratorys (ARLs) development of CS and described the considerations, modeling, and certain research and development aspects investigated. The presentation described the U.S. Armys development of wear and impact protection coatings, their benefits, and their current use. The presentation concluded with a case study of CS application in Bradley turret mounts and a Letterkenny ball screw actuator, where CS enabled previously expensive repairs to be more cost effective and improve performance.
2.1.6 Additive Manufacturing Efforts in Support of the U.S. Navy Fleet (Presentation B6 ML20339A654)
Presenter: Justin Rettaliata, U.S. Navy This presentation introduced the U.S. Navys objectives for AM. It included an overview of technical documents the U.S. Navy has published to expand knowledge of AM. The presentation highlighted technical data packages, logistics integration, and the Naval Additive Manufacturing Part Identification Exercise, which are key steps to establishing integrated AM components in vessels and facilitating advanced manufacturing on board vessels.
Summary of Session 1 The topics presented include experience with AM component fabrication for nuclear applications, PM-HIP for nuclear applications, CS experience for U.S. Army applications, and AM experience for U.S. Navy applications. As additional experience on implementing AMTs accrues, those lessons learned and data should be used to justify and increase confidence in further applications of AMTs. AMTs used in other industries or applications may offer insights to benefit their development and use in nuclear applications.
Key takeaways:
Experience with AM components in non-or low-safety-significant nuclear and nonnuclear applications is being generated and growing.
Use of PM-HIP with EBW for larger nuclear components looks promising but requires larger hot isostatic pressing (HIP) and EBW fabrication capabilities.
CS is being used increasingly for U.S. Army applications, particularly for high-wear applications.
Recommended next steps:
As additional experience on implementing AMTs accrues, use those lessons learned and data to justify and increase confidence in further applications of AMTs.
13 Leverage insights and knowledge from AMTs used in other industries or applications to benefit their development and use in nuclear applications.
2.2 Session 2: Plans and Priorities for AMT Implementation in Commercial Nuclear Applications 2.2.1 Industry Perspectives on AMTs (Presentation B7ML20342A037)
Presenter: Hilary Lane, NEI This presentation covered the NEIs position in the nuclear energy industry and its view on how AMTs are seen as a significant prospect. The presentation introduced the NEIs Advanced Manufacturing Task Force, which is analyzing AMTs of interest and assessing deployments of these technologies. It described AMTs for nuclear components, including PM-HIP, directed energy deposition AM (DED-AM), LPBF, and EBW.
2.2.2 Vision of AMT Use in the Nuclear Industry (Presentation B8ML20342A035)
Presenter: Marc Albert, EPRI This presentation outlined EPRI roadmaps for the development of AMTs and AMs. Roadmaps covered suggested AMTs for nuclear components, including PM-HIP, DED-AM, LPBF, advanced cladding processes, and EBW. Additionally, the presentation discussed EPRIs activities addressing AM to support spare and replacement parts.
2.2.3 Utility Perspective on Implementing AMTs in LWRs (Presentation B9ML20342A036)
Presenter: Lee Friant, Exelon This presentation covered Exelons view on AM, indicating the utilitys perspective on the three most compelling benefits: cost savings, obsolete part replacement, and component improvement. In addition to potential benefits, the presentation discussed the more significant barriers, including the lack of familiarity with AMTs, lack of standards, and the absence of a regulatory framework. The presentation concluded with Exelons main takeaways for utilities, including the setting of realistic timelines and challenges with first-time AMT applications.
2.2.4 Westinghouse Advanced Manufacturing Development and Implementation Efforts (Presentation B10ML20342A034)
Presenter: Clinton Armstrong, Westinghouse This presentation covered the objectives of Westinghouses Advanced Manufacturing Program and multiple AM projects, including the companys thimble plugging device, fuel debris filtering bottom nozzle, and fuel spacer grid. Additionally, the presentation discussed the additional efforts for innovation projects and replacement part identification that are geared towards developing AM processes for nuclear components. The presentation concluded with a brief overview of HIP and advanced welding development efforts.
2.2.5 Potential Applications, Challenges and Progress of Framatome Additive Manufacturing Application (Presentation B11ML20342A033)
Presenter: Christopher Wiltz, Framatome This presentation provided an overview of AMTs from Framatomes perspective and comments about how the industry sees AMTs being integrated into the nuclear industry. The presentation
14 then focused on Framatomes nuclear fuel-related activities and progress, including a case study on Framatomes channel fastener manufactured with 316L stainless steel using the LPBF technique. Framatomes channel fastener has been designed, evaluated, and will be installed at the Browns Ferry Nuclear Power Plant, Unit 2, where it will be in operation for three cycles and then analyzed. The presentation concluded with Framatomes perspective on the path forward for AM applications.
2.2.6 AMT with Advanced Materials in Nuclear Operations (Presentation B12ML20342A038)
Presenter: Robert Oelrich, PNNL This presentation began with the state of advanced manufacturing in the nuclear industry and the current efforts being made to test AMT components in operating light-water reactors (LWRs). This was followed by how AMTs can enable innovation in the field of advanced materials, allowing for more rapid grading, use of nontraditional materials in current reactors, and the development of components for new advanced reactors. Additionally, the presentation discussed the number of variables that require control and understanding in AM. It included further comments on how AM continues to evolve and how this may impact licensing processes and standards. The presentation concluded with a case study on Pacific Northwest National Laboratorys (PNNLs) coating/cladding developments related to accident tolerant fuel.
Summary of Session 2 This session covered the identification of candidate components and uses of AMT, AMT parts in service or soon to be in service, uses of AMTs in fuel hardware components, and AMT development and qualification processes.
Key takeaways:
AMT technologies evolve quickly, outpacing the qualification and licensing processes.
More collaboration would benefit industry, the DOE, national laboratories, and the NRC.
Operating experience from other industries should be used for nuclear applications.
Recommended next steps:
Continue to develop standards and increase collaboration among all nuclear stakeholders as well as other industries.
Focus collaboration to increase knowledge and confidence in the industry for AMTs.
Share lessons learned from experience with AMTs.
Seek input and feedback from nonnuclear regulators and industry organizations.
Consider performing shorter (i.e., 1-day) workshops on specific AMTs.
15 DAY 2 PRESENTATIONS 2.3 Session 3: Performance Characteristics of AMT-Fabricated Components 2.3.1 Rolls-Royces Introduction of AM Nuclear Components (Presentation B13 ML20351A160)
Presenters: David Poole and William Press, Rolls-Royce This presentation covered Rolls-Royces implementation strategy, a case study on its primary circuit manual globe valve, and its strategies going forward. The presenters discussed their development of the manual globe valve, made from 316 stainless steel through LPBF, which is a safety-critical, high-production-volume component located on a pressure boundary. The presenters evaluated the strategy used to justify design, centering on a multifaceted system that thoroughly details requirements for sampling trials, testing, failure analysis, and inspection.
2.3.2 Fatigue and Mechanical Properties of Laser-Powder Bed Fusion 316L Stainless Steel (Presentation B14ML20342A373)
Presenter: Steven Attanasio, NNL This presentation covered the U.S. Naval Nuclear Laboratorys (NNLs) interests in metal AM and the potential benefits that naval nuclear operations could experience by using AMTs. The presentation focused on the microstructures of 316L stainless steel builds manufactured using AM and HIP. It included the results of thorough testing and review, comparing the differences between the standards for 316L stainless steel and the AM builds. Results summarized at the end of the presentation indicate that AM components can meet the current standards despite typical negative attributes, such as orientation effects.
2.3.3 Impact of Powder Supply Variation on Microstructure and Properties in Additive Manufactured Alloy 718 (Presentation B15ML20342A374)
Presenter: Christopher Kantzos, NASA This presentation covered NASAs view on AM and its motivations to use AM in its operations. It focused on the NASA project to understand feedstock effects on SLM Alloy 718 using 16 different powder stocks from 8 different suppliers. The aim of this effort was to understand how manufacturing environments affected the final powder and its buildability, and also to document how reuse of these powders differed. The presentation reviewed the extensive tests and results, and each section concluded with significant findings and potential points for the standardization of feedstock powders.
2.3.4 Elucidating the Effect of Feedstock Powder Spheroidization Treatment on Selective Laser Sintered Additively Manufactured 316L Stainless Steel (Presentation B16ML20351A161)
Presenters: Raymond Santucci and Elizabeth Getto, U.S. Naval Academy This presentation covered the U.S. Naval Academys efforts to better understand powder morphology and its effects on AM builds. Plasma-treated powders were theorized to result in better builds by improving spheroidization of the powder, thereby improving layer recoating, powder packing, and final properties. Testing two different powders, untreated and plasma treated, showed that there are significant differences in build properties, especially in porosity.
16 2.3.5 Linking 3D Microstructural Analysis of Additive Manufactured 316L to Performance and Properties (Presentation B17ML20342A375)
Presenter: David Rowenhorst, NRL This presentation covered the U.S. Naval Research Laboratorys (NRLs) efforts to catalog AM microstructures of 316L stainless steel using NRLs robotic serial sectioning system. Significant data were provided related to the serial sectioning process. The presenter gave a further overview of pore data and grain formations reproduced in 3D. The presentation concluded that the production of these 3D structures is useful for modeling and simulation and will be an essential factor in modeling verification. The modeling of 316L stainless steel showed that the grains of 316L stainless steel made using LPBF are larger and more complex than those of typically manufactured 316L stainless steel.
2.3.6 The Effects of Post-Processing on Mechanical Properties and Corrosion Behavior of AM 316L Stainless Steels (Presentation B18ML20342A381)
Presenter: Richard Fonda, NRL This presentation covered the results of indepth NRL tests to determine microstructure, corrosion behavior, and mechanical properties of AM 316L stainless steel in as-built and postprocessed conditions. One significant finding was that 316L AM stainless steel tends not to exhibit passivity, especially at the surface. The passivity improves up until roughly 380 micrometers depth. The loss of passivity is attributed to significant porosity in the as-built condition. Comparatively, the postprocessed builds exhibited changes in microhardness and cell structures. Significantly, HIP processed builds reduced porosity by about two-thirds and effectively increased passivity in these samples. Overall, all AM structures exceeded 316L stainless steel specifications for yield strength, ultimate tensile strength, and elongation.
2.3.7 Process Validation for AM at the FDA (Presentation B19ML20342A376)
Presenter: Daniel Porter, FDA From the perspective of the U.S. Food and Drug Administration (FDA), submissions using AM have increased, dominated by LPBF technologies. This presentation demonstrated the FDAs method to validate samples using the U.S. FDA AM guidance document. Significant factors that the FDA requires to validate samples include position and orientation to build plate, feedstock control, and postprocessing parameters. In conclusion, the presentation offered a perspective on how nuclear regulation could be more flexible and inclusive.
2.3.8 Technical Assessments of AMTs (Presentation B20ML20339A385)
Presenter: Margaret Audrain, NRC This presentation covered the NRCs current technical perspective on LPBF and the NRC AMT Action Plan. It discussed a ranking of significant factors and gaps present in the LPBF process, including process control and management, witness specimens, residual stress, powder quality, and postprocessing. It provided further ranking for specific issues related to 316L stainless steel, including differences in mechanical properties, weldability, and long-term effects. The presentation concluded with gaps in codes and standards, including criteria for powder recycling and sieving, heterogeneity, witness specimens, and weld integrity.
17 2.3.9 PM-HIP and Electron Beam Welding Development for Nuclear Applications (Presentation B21 - ML20342A377)
Presenter: David Gandy, EPRI This presentation covered EPRIs projects involving PM-HIP and EBW and how these projects benefit EPRIs larger Small Modular Reactor Advanced Manufacturing Project. The presentation focused on the process of building the typically complex and expensively forged reactor head, which was completely manufactured using PM-HIP and EBW. Citing this specific case study, EPRI presented the benefits of these two techniques, including the ease of inspection and shorter lead times of PM-HIP and the rapid and repeatable electron beam welds. The presentation also gave an overview of EPRIs efforts to establish the capability for EBW in the United States with the modular in-chamber EBW apparatus used for the project and its potential application to current reactors.
2.3.10 Cold Spray Process Details and Nuclear Applications (Presentation B22 ML20342A378)
Presenters: Ken Ross and Jack Lareau, PNNL This presentation summarized the CS process and reasons why this could be useful to the nuclear industry, including a detailed mechanistic description of CS application and important factors that affect the quality of a CS application, including high pressure, helium usage, surface preparation, powder processing, and material choice. It covered case studies to describe the quantitative benefits currently seen in CS applications, including in chlorine-induced stress-corrosion cracking (SCC) repairs and Westinghouse LWR fuel cladding. The presentation further described the potential to use CS for monitoring purposes and online tracking of preexisting cracks since nickel CS coatings are magnetostrictive. The presentation concluded with comments on code considerations, regulatory implications, and technical justifications.
2.3.11 Cold Spray Mitigation and Repair for Nuclear Applications (Presentation B23 ML20342A379)
Presenter: Kyle Johnson, VRC Metal Systems This presentation covered VRC Metal Systems use of CS to mitigate seawater corrosion issues in military and industrial applications and how its experience in this area can inform the handling of nuclear corrosion issues with CS applications. The presenter cited CS corrosion mitigation techniques as a solution due to the ability to apply CS at low temperatures (as low as 400 degrees Celsius), its high density and high adherence, its crack retardation properties, and its rapid application. The presentation showed the companys efforts to develop a highly mobile unit to apply CS to tight spaces and described a successful case study on a commercial vertical canister system, where application is uniform and efficient using robots.
2.3.12 Laser Glazing of Cold Sprayed Coatings for the Mitigation of Stress Corrosion Cracking in LWR Applications (Presentation B24ML20345A163)
Presenters: Bogdan Alexandrenau and A.K. Rai, ANL and UES, Inc.
This presentation covered work by Argonne National Laboratory (ANL) and UES to mitigate SCC of Alloy 600 and Alloy 182 weldment with a hybrid CS and laser glazing process. Samples of SCC-prone and SCC-resistant material are coated using CS and then treated with laser glazing to improve corrosion protection and repair cracks in the substrate. Results found that laser glazing improved adhesion in samples where the surface was initially grit blasted; however, adhesion strength was nearly the same in samples that were not laser glazed. The
18 study concluded that, under optimal conditions, the hybrid treatment was able to seal to the crack and reduced crack growth rate in Alloy 600 and Alloy 182.
Summary of Session 3 This session covered a wide range of topics, including implementation and justification strategies for identifying and undertaking candidate nuclear applications, effects of processing and postprocessing variables on performance/qualification, regulatory assessment activities and approval processes, development of PM-HIP and EBW for thick-section ferritic components, effects of laser glazing on CS performance, past and future CS applications, and CS field implementation.
Key takeaways:
Applications should be identified that optimize unique characteristics for the chosen AMT.
Current analysis tools and the digital nature of AM allow for a deeper understanding of causal effects on performance than for conventionally manufactured materials.
Regulatory authorities are exploring strategies to support the accelerated deployment of AM components, while still meeting safety requirements.
PM-HIP and EBW offer possibilities for large-scale nuclear applications but are currently limited by existing manufacturing capabilities; upcoming work is focused on expanding these capabilities.
High-velocity CS can provide several options for component surface treatment, including SCC mitigation, hard-facing, and component repair.
Strategies have been developed to achieve field application of CS for components and structures with limited accessibility.
Recommended next steps:
Continue developing the technical basis for using these technologies in nuclear applications.
Identify strategies to effectively collaborate and rapidly incorporate lessons learned in standards and guidance.
Expand the technical basis to move beyond substitutive applications to realize optimal benefit of AMTs.
Develop an intelligent, performance-based qualification framework to allow more rapid implementation.
Identify opportunities for these technologies to simultaneously improve component performance (and safety) while reducing lifecycle asset management costs.
Consider methods and applications for which AMTs can be combined to optimize performance and increase design flexibility.
19 DAY 3 PRESENTATIONS 2.4 Session 4: Approaches to Component Qualification and Aging Management 2.4.1 AM Thimble Plugging Device/Advanced Debris Filtering Bottom Nozzle Implementation Process (Presentation B25ML20344A013)
Presenter: David Huegel, Westinghouse This presentation covered the Westinghouse process of qualifying its two AM components currently in use. The presentation provided a detailed timeline of Westinghouses AM testing and analyses of the components until they were qualified and installed into the unit. It gave a more detailed overview of the testing performed, including irradiated and unirradiated mechanical testing, microstructure evaluation, and dye penetration testing. The presentation concluded with a brief explanation on the process under Title 10 of the Code of Federal Regulations (10 CFR) 50.59, Changes, tests and experiments, and the role of AM testing in the implementation of AM components.
2.4.2 Approach for 316L LPBF Code Case and Data Package (Presentation B26 ML20344A011)
Presenters: Clinton Armstrong and David Gandy, Westinghouse and EPRI This presentation detailed the importance of the relevant code case and data package development in furthering the manufacturing of 316L stainless steel using LPBF. The presentation then focused on the current standards for 316L stainless steel components, how AM components compare, and how standards for such components may appear based on the experience of Westinghouse and EPRI. The presentation showed graphs and tables of current data on 316L stainless steel manufactured using LPBF. It concluded with discussion of a draft code case and important next steps in the standardization process.
2.4.3 Certification of the First Powder Bed Fusion Component in a US Naval Nuclear Propulsion Plant (Presentation B27ML20344A012)
Presenter: Tressa White, NNL This presentation described NNLs efforts to manufacture AM hardware suitable as a pressure boundary component for submarine propulsion plant operation. It described the criterion for acceptance testing in the project and mechanical test data. The project was successful in generating components and witness specimens that were within standards. The presentation concluded by highlighting the success of this project, ending in the recent approval and installation of components.
2.4.4 On the Development of Fatigue and Damage Tolerance Framework for Metal AM Parts (Presentation B28ML20344A052)
Presenter: Michael Gorelik, FAA This presentation introduced the U.S. Federal Aviation Administration (FAAs) view on fatigue in AM materials, highlighting four major factors that affect fatigue life: metal-related defects, machining-induced defects, porosity, and nonmetallic inclusions. It detailed the importance of characterization methods for these defects and of developing nondestructive methods of testing, especially for AMT components. The presentation concluded with selected research and
20 development data and results for fatigue and damage tolerance, emphasizing the importance of collaboration among industries to further AM development.
2.4.5 Accelerating Quality Certification of Critical Components with Additive Manufacturing (Presentation B29ML20345A164)
Presenter: Vincent Paquit, ORNL This presentation described the Transformational Challenge Reactor (TCR) program and its use of AMTs. It detailed the certification pathways used for these components, smart manufacturing approaches taken by the Oak Ridge National Laboratory (ORNL) in AMTs, and the development of a digital platform for manufacturing in the AM space. The presentation also covered augmented intelligence for AM, emphasizing that a benefit of AM components is the possibility for integrated augmented intelligence for in situ evaluation. This was further explained in anomaly detection examples and property predictions. The presentation concluded by highlighting ORNLs collaborative effort to install 3D-printed fuel assembly channel fasteners in a commercial reactor.
2.4.6 Inservice Inspection and Considerations for AMT Components (Presentation B30 ML20344A014)
Presenter: Joel Harrison, PNNL This presentation addressed potential inservice inspection requirements for AMT components in the nuclear industry, highlighting that the lack of attention this has received is detrimental to widespread AMT component use in the nuclear energy industry. It presented specific sections of current inservice inspection examination requirements and detailed the potential incorporation of AMTs.
Summary of Session 4 This session covered the implementation process for the AM thimble plugging device and advanced debris filtering bottom nozzle, progress on an American Society of Mechanical Engineers (ASME) code case and data package for 316L stainless steel manufactured using LPBF, inservice inspection, and accelerating quality certification of critical components with AM.
Key takeaways:
AMTs are being incorporated, with more implementation planned.
Codes and standards development should aim to keep pace with AMT advances.
Much work remains for inservice inspection, including the Performance Demonstration Initiative.
Recommended next steps:
Expand and continue to mature codes and standards development.
21 2.5 Session 5: Codes and Standards Activities and Developments 2.5.1 Standards Landscape for Additive Manufacturing (Presentation B31ML20344A116)
Presenter: Shawn Moylan, NIST This presentation described NISTs influence on AM standards and the role AM standards will have in the AMT space. It further detailed NISTs efforts to supply measurement science research for developing AM standards and the formation of the Additive Manufacturing Standards Collaborative, which is intended to coordinate and accelerate the creation of AM standards and to facilitate growth in the AM industry. The presentation also explained additional committees, such as ASTM Internationals (ASTMs) Committee F42 and ISO Technical Committee 261. The presentation concluded with ASME efforts and NISTs perspectives on AM standards.
2.5.2 ASME Criteria for Powder Bed Fusion Additive Manufacturing (Presentation B32 ML20344A117)
Presenter: George Rawls, SRNL This presentation described current ASME criteria for LPBF manufacturing and highlighted the production of a final draft on criteria for pressure-retaining metallic components using AM. The presentation further explained the details of these criteria, emphasizing requirements and limitations and how LPBF compares to non-AM techniques. The presentation concluded with an outlook on the path forward and how these criteria should be treated as a baseline for future development efforts.
2.5.3 Approach to Codifying New Manufacturing Methods (Presentation B33ML20344A113)
Presenters: Brian Frew and David Gandy, GE and EPRI This presentation described the current gaps in requirements in the ASME B&PV Code and specific alloys that need qualification for manufacturing using PM-HIP, CS, LPBF, and EBW techniques. For each manufacturing technique, the presentation outlined significant code cases across industries and important alloys that should be reviewed for that technique. Overall, it concluded that the nuclear industrys acceptance of AMTs is still low, and increased data for specific materials will be helpful in mobilizing the nuclear industry and standardization.
2.5.4 Overview of America Makes Activities (Presentation B34ML20344A115)
Presenter: Brandon Ribic, America Makes This presentation described America Makes and its role in the AM space. Its role is centered around three core activities: development of AM technology, acceleration of human capital development, and maintenance of a collaborative ecosystem. The presentation explained how this is done through operations, technology, and communications across stakeholders, government, and communities. It further detailed the merits of AM for nuclear applications and presented different factors affecting the effective scaling of AM technology for nuclear applications. The presentation concluded with the current regulation and standards landscape and future opportunities present for development.
22 2.5.5 Recent Advancements on ASTM Additive Manufacturing Research and Standardization (Presentation B35ML20351A216)
Presenter: Mohsen Seifi, ASTM This presentation described ASTMs current actions to develop codes and standards and address gaps. This included a description of the ASTM AM Center of Excellence, founded in 2018 to accelerate ASTM standardization activities. The presentation further detailed the F42 Subcommittee on Applications for AM. This was followed by detailed examples of current research and development efforts ASTM is collaborating on to develop data for AM.
2.5.6 NASA Standard for Use of AM in Crewed Spaceflight Applications (NASA-STD-6030)
(Presentation B36ML20344A114)
Presenter: Douglas Wells, NASA This presentation described NASAs standardization activities and its efforts to support standards development organizations, such as ASTM and the FAA. The presentation further detailed NASA-STD-6030 and the techniques and materials covered within that standards document. It then gave a classification tree within NASA-STD-6030 and important factors considered as NASA tailored its qualification process. The presenter reflected on NASAs near-term challenges with risk management of high-criticality parts with limited postbuild structural integrity verification, and how managing risk as the AM field develops is critical for the aerospace industry.
2.5.7 Development of AWS D20.1 Standard (Presentation B37ML20344A112)
Presenter: Jessica Coughlin, NNL This presentation introduced American Welding Society (AWS) D20.1/D20.1M:2019, Specification for Fabrication of Metal Components Using Additive Manufacturing, which provides extensive design, qualification, manufacture, and inspection requirements for LPBF and DED. The presentation highlighted that extensive testing and evaluation requirements are needed to ensure acceptable and repeatable properties, due to the inherent variability present in AM processes. Standardized testing can also provide consistent means for detecting quality concerns and sources of variation.
Summary of Session 5 This session covered roadmaps, centers of excellence, development of nuclear and nonnuclear consensus standards, and the industry and regulatory needs driving the development and readiness of AMTs.
Key takeaways:
Many gaps exist in technology and standards development. The American National Standards Institute is tracking these gaps (www.ansi.org/amsc).
Standards development organizations benefit from continual communication to reduce the development of redundant standards.
Collaboration with regulatory agencies would be helpful to identify needs related to codes and standards.
23 Recommended next steps:
Initiate NRC communication with other regulatory bodies on AMT topics.
Encourage industry and regulatory involvement in standards development.
Encourage communication among standards development organizations on AMT standards development.
24 DAY 4 PRESENTATIONS 2.6 Session 6: Regulatory Approaches for AMTs 2.6.1 NRC Regulatory Approach for AMTs (Presentation B38ML20344A422)
Presenter: Carolyn Fairbanks, NRC This presentation described regulatory preparedness activities taken under the NRC AMT Action Plan. It gave an overview of the 10 CFR 50.59 process and summarized the assessment of regulatory guidance. The rest of the presentation largely focused on the development of an AMT guidelines framework and the two regulatory pathways for incorporating AMTs: the equivalency approach and the design modification approach. The NRC provided a sample application guidance flow chart to demonstrate the potential regulatory pathway.
2.6.2 STUK Regulatory Approach for AM (Presentation B39ML20345A165)
Presenter: Pekka Valikangas, STUK This presentation provided an overview of the regulation of AM components in Finnish nuclear facilities. It began with a brief overview of Finnish nuclear facilities for context, including a general snapshot of Finnish nuclear legislation and safety requirements. The presenter gave details on Finnish regulatory oversight of AM, highlighting the importance of overseeing the reliability of the process and quality of the builds, including the consideration of international research and standardization. The presentation further elaborated on conventional standards and how the transition to including AM produces multiple questions on how to codify the procedure.
2.6.3 FDA Regulatory Approach for AM (Presentation B40ML20344A423)
Presenter: Matthew Di Prima, FDA This presentation described the FDAs typical pathway for medical device regulation and how this has been applied to AM. The classification of medical devices is covered under Federal codes and also indicates the degree of regulation based on the degree of risk. The presentation covered the information required in submissions, which can be reduced or increased based on the device classification. Generally, the FDA does not intend to regulate the manufacturing process as long as the resulting device meets requirements. This allows the FDA smoother acceptance of AM products.
2.6.4 Regulatory Considerations for AM and Lessons Learned for Structural Alloys (Presentation B41ML20344A424)
Presenter: Michael Gorelik, FAA This presentation highlighted the potential for performance-based standards for the FAAs regulation of AM, stating that although the rules should not change, specific factors of the AM process may require regulation. The presenter discussed relevant technologies and highlighted the specific regulatory processes. The presentation concluded with the FAAs lessons learned with powder metallurgy and structural castings, and how the historical experience and relevant regulatory techniques may apply to AM.
25 Summary of Session 6 This session discussed approaches for regulating AMTs from nuclear and nonnuclear regulators. The regulatory organizations in this session identified numerous commonalities.
Key takeaways:
Regulators share many common bases, including performance-based regulation.
Regulators share common technical concerns for AM, such as powder characteristics and the use of witness coupon testing to represent manufactured parts.
Regulators could consider greater coordination and information exchange, particularly on AM, which is being implemented in many industries now for the first time.
Recommended next steps:
Consider enhanced coordination between the NRC and other U.S. regulators to benefit from lessons learned on approaches for integrating AMTs into current regulatory frameworks.
Coordinate among international nuclear regulators to provide broader perspectives and ensure common approaches, consistent with different national regulatory needs.
2.7 Session 7: Research and Development of AMTs 2.7.1 Quality Control Tools for Metal AM and EU NUCOBAM Project (Presentation B42 ML20345A156)
Presenter: Pasi Puukko, VTT This presentation described the general approach for AM qualification in three parts: process qualification (including machine, powder, operator), component qualification, and individual part quality control. The presenter also elaborated that AM component quality will be monitored by both destructive and nondestructive testing and in-process monitoring. They described the European Unions (EUs) NUCOBAM Project, detailing its role in the qualification process and responsibility for providing the evaluation of inservice behavior allowing AM for nuclear integration. The presentation described multiple work packages, detailing multiple collaborative efforts, including the Finnish Technical Research Centres (VTTs) AM process qualification work package. It then described the current state of qualification methods used for LPBF and the problems being addressed in developing a general LPBF qualification scheme.
2.7.2 DOE Transformational Challenge Reactor Program (Presentation B43ML20345A157)
Presenter: Kurt Terrani, formerly ORNL This presentation gave an in-depth review on the TCR and its efforts in the AM and augmented intelligence spaces. It highlighted specific efforts, including ORNLs effort to codify metal AM and the incorporation of sensors into AM builds for operational data harvesting. The presentation then reviewed AM 316L stainless steel used for the TCR and its microstructures before irradiation and how such material compares to conventional 316L stainless steel and the performance expected in the TCR.
26 2.7.3 DOE-NE Advanced Manufacturing Methods Program Overview (Presentation B44 ML20345A158)
Presenter: Isabella van Rooyen, INL This presentation explained the actions the DOE Office of Nuclear Energy (DOE-NE) has pursued and its objectives and priorities for fiscal year 2021, including increasing stakeholder participation, leveraging research, identifying gaps and needs, increasing collaboration, and establishing projects. The presentation then focused on highlighting significant awarded projects and commented on the current state of Idaho National Laboratorys (INLs) work, including projects relating to LPBF, nondestructive testing, and CS.
2.7.4 Rapid Qualification of New Materials Using Modeling and Simulation (Presentation B45 ML20345A159)
Presenter: Mark Messner, ANL This presentation described the premier challenges in qualifying AM materials, especially for high-temperature applications, including potentially significant variability between AM builds, and the importance of long-term and time-dependent properties that lack conclusive short-term testing such as creep and thermal aging characteristics. The presentation then elaborated on ANLs efforts to design modeling tools capable of predicting these important factors and accelerating qualification, highlighting three separate qualification tools: physically based models, staggered qualification approaches, and uncertainty quantification through Bayesian inference. The presentation then concluded with potential collaborative use of these tools in a qualification pathway and a summary of key gaps present in the current modeling space.
2.7.5 Cold Spray Development for Coatings (Presentation B46ML20345A160)
Presenters: Kumar Sridharan, University of Wisconsin, and George Young, Kairos Power This presentation focused on CS and related recent studies, concluding that the technology would be advantageous in the nuclear industry for repair and coating applications. The presenters then explained specific case studies of successful CS application, including mitigating and repairing stainless steel canisters used for dry cask storage and corrosion and tritium diffusion barrier coatings for fluoride salt-cooled high-temperature reactors using nickel and tungsten.
2.7.6 In-Situ Process Measurements for Monitoring, Control, and Simulation of AM (Presentation B47ML20345A161)
Presenter: Brandon Lane, NIST This presentation described NISTs efforts to develop in situ process monitoring of AM, including a thermography system that tracks the melt pool and can provide significant information relative to component properties and microstructure based on the radiance temperature and cooling rate. The presentation then elaborated on how a monitoring method can inform controls based on machine learning. The presentation concluded with NISTs in situ data and dissemination framework.
2.7.7 Additive Manufacturing Consortium (Presentation B48ML20345A162)
Presenter: Mark Barfoot, EWI This presentation introduced EWI (formerly the Edison Welding Institute) and explained its role in the materials industry and how it contributes to AM development by evaluating new
27 processes, developing material property data, enabling clients to adopt the technology, and founding the Additive Manufacturing Consortium (AMC) in 2009. The presenter then explained the benefits of the AMC and the collaborators within the AMC, including General Electric Company (GE) and NASA. The presentation concluded with projects the AMC has sponsored and how interested parties can take part in AMC activities.
Summary of Session 7 This session covered worldwide efforts by researchers on solutions to quality assurance and quality control issues, the role of modeling and simulation in accelerating the qualification of new AMT materials, the investigation of CS as a corrosion mitigation strategy, advances in in situ monitoring, and an overview of the AMC and its role in coordinating and funding AM research.
Participants agreed that it is important to continue to evaluate research needs and technology gaps.
Key takeaways:
Over the next several years, nuclear-focused AM research will make significant strides.
The nuclear community is interested in the accelerated qualification of new AM materials.
Recommended next steps:
Continue to evaluate research needs and technology gaps.
28
- 3. Summary and Conclusion The staff had the following primary objectives for the NRCs public workshop on AMTs for nuclear applications:
Discuss ongoing activities related to AMTs, including nuclear industry implementation plans, codes and standards activities, research findings, and regulatory approaches in other industries.
Inform the public of the NRCs activities and approach to approving the use of AMTs.
Determine, with input from nuclear industry stakeholders and other technical organizations, areas where the NRC should focus to ensure the safe implementation of AMTs.
The workshop provided an opportunity to share information among international counterparts on approaches to using AMTs. Participants agreed that to support near-and medium-term use of AMTs in nuclear applications, industry and researchers should focus on developing data to support the qualification of AM materials. These data can be used to support codes and standards development and provide a technical basis to support implementation. Initial use of AMTs in non-or low-safety-significant components will provide a path to use for components of higher safety significance by building experience and confidence in the performance and properties of AMT components in representative environments. Combining this approach with innovative plans for in-service inspections and post-service destructive evaluation can further improve confidence in the performance of AMTs.
The NRC staff intends to consider an array of insights from the workshop (largely identified in the session summaries in Section 2) in future activities related to AMTs. These include strong engagement through codes and standards bodies, improved coordination with other regulators, and novel approaches to accelerate qualification that take advantage of the digital nature of AM and advanced modeling and simulation tools.
A-1 Appendix A Workshop Attendees and Presenter Bios Name Organization Sunil Acharya ANSYS Marc Albert EPRI Stephen Alexander ISL, Inc.
Bogdan Alexandreanu ANL Brian Allik NRC Lydiana Alvarado NRC Isaac Anchondo-Lopez NRC Jordan Anderson Ontario Power Generation Clinton Armstrong Westinghouse Steven Attanasio NNL Lee Aucott UKAEA Meg Audrain NRC Pajazit Avdovic Siemens Energy Dustin Avery U. Alabama Marsha Bala INL Mark Barfoot EWI David Beaulieu NRC Paul Beer Curtiss Wright Jay Bennett NASA Michael Benson NRC Inigo Bolado Dawn Bosco BPMI Anna Bradford NRC Jonathan Braisted NRC Nicole Brown U.S. Navy Hayden Brundage NRC Frederick Brust EMC2 Mike Burke EPRI Dirk Cairns-Gallimore DOE Bob Caldwell NRC Thomas Capobianco James Carr CNL Harold Carter NNL Yiren Chen ANL Minghui Chen U. New Mexico Alex Chereskin NRC Andrew Chern BWXT Ganesh Cheruvenki NRC Jason Christensen INL Name Organization Shannon Chu EPRI Arne Claes ENGIE William Cleary WEC Alyson Coates ORNL Keith Consani NIST Sam Cordner NASA Nicolas Correa UKAEA Jessica Coughlin NNL Ted Coulter TVA Ted Dahne Toshiba Jens Darsell PNNL Robert Davis NRC Mike Di Lisi Ontario Power Generation Matthew Di Prima FDA Mark Dietrich Dassault Systemes David Dijamco NRC Paul Donavin Alkan Donmez NIST Daniel Drazkowski NNL Darrell Dunn NRC Bassem El-Dasher TerraPower Laila El-Guebaly U. Wisconsin James Eliou NNL Jonathan Emery Giovanni Facco NRC Carolyn Fairbanks NRC Adam Falcone Naval Reactors Shaw Feng NIST William Ferrell AMS Corporation Kevin Field U. Michigan Eric Focht NRC Richard Fonda NRL Steve Frankl NRC Kathryn Franks BPMI Brian Frew GE Lee Friant Exelon Travis Fritts BWXT Raymond Furstenau NRC Daniel Galicki BWXT David Gandy EPRI Adam Garofalo U.S. Navy Michael Gilbert Ontario Power Generation
A-2 Name Organization Bill Glass PNNL David Glenn BWXT William Golumbfskie NSWC, Carderock Hipo Gonzalez NRC Paul Goodwin UKAEA Michael Gorelik FAA Carlo Grassucci BPMI David Gross Dominion Engineering, Inc.
Mark Guthrie Curtiss-Wright EMD Jonah Haefner U.S. Navy Evan Handler U.S. Navy Joel Harrison PNNL Alex Hashemian AMS Corporation Matt Hauser NNL Shawn Heath Framatome Greg Hersak CNL David Herzog NNL Takehisa Hino Toshiba Matthew Hiser NRC Allen Hiser NRC Keith Hoffman NRC Michael Holmes WEC Marc Horner Ansys Christopher Hovanec DOE Susan Hovanec U.S. Navy David Huegel WEC Richard Huff ASTM International Shane Hughes Toshiba Amy Hull NRC Alex Huning ORNL Brian Hunt Precision Custom Components, LLC Keith Hustosky BPMI Michael Ickes Westinghouse Raj Iyengar NRC Richard Jacob PNNL Mahdi Jamshidinia ASTM International Amanda Jenks Dominion Engineering, Inc.
Francis Johns Emirates Nuclear Energy Corporation Kyle Johnson VRC Metal Systems Al Jones NIST Colin Judge INL Tom Jungling BPMI Name Organization Kevin Jurrens NIST Moritz Kaess U. Stuttgart Rajib Kalsar PNNL Junya Kaneda Hitachi GE Nuclear Energy Christopher Kantzos NASA Y Kata Toshiba Hyunwoong Ko NIST Tatsuro Kobayashi TEPCO Mageshwari Komarasamy PNNL Patrick Korzeniowski U.S. Navy Michael Kottman ASTM International Markus Kotzanek Framatome GmbH Michelle Koul US Naval Academy Jason Lambin Crane Nuclear Hilary Lane NEI John Lane NRC John Lareau PNNL Steven Lawler Frazer-Nash Consultancy Doris Lewis NRC Meimei Li ANL Shengyen Li SWRI Bruce Lin NRC Jennene Littlejohn NRC Nathan Livesey NAVSEA Christopher Lohse SIA Shanlai Lu NRC Yan Lu NIST Sarah Luna NASA Louise Lund NRC Tim Lupold NRC Shah Malik NRC Mohammad Masoomi ANSYS Inc.
Uwe Mayer MPA U. of Stuttgart Lauralyn McDaniel ASME Brian McDermott TVA Travis McFalls BWXT Matthew McMahon U.S. Navy Mike McMurtrey INL Bob McReynolds Kairos Power James Medoff NRC Teresa Melfi Lincoln Electric Nate Mentzer NRC
A-3 Name Organization Mark Messner ANL Michael Miller ANSYS Paul Miller ANSYS Frank Mischler Hitachi America, Ltd.
Tesfaye Moges NIST Robert Montgomery PNNL Shawn Moylan NIST Aaron Nardi VRC Metal Systems Steve Nardone ENGIE Alderson Neira Proto Precision Additive LLC Scott Nelson UT-Battelle Charles Nguyen U.S. Navy Wallace Norris PNNL Carol Nove NRC Richard Novotnak BPMI Scott Novotny NAVSEA Mark Nutt PNNL Robert Oelrich PNNL Tara O'Neil PNNL Ichiro Ono TEPCO Jeff Otterstetter PPI George Pabis NovaTech Yiming Pan SWRI Vincent Paquit ORNL Dong Park NRC Arash Parsi WEC Eternity Perry AMS Cecile Petesch CEA John Pfabe WEC Ed Pheil Elysium Industries USA Jeff Poehler NRC Dave Poole Rolls-Royce Steven Pope ISL, Inc.
Daniel Porter FDA Jim Powers TAES Bill Press Rolls-Royce Iouri Prokofiev Matt Prowant PNNL Patrick Purtscher NRC Pasi Puukko VTT J. Quinn TAES Amarendra Rai UES Inc Antonio Ramirez The Ohio State U.
George Rawls SRNL Name Organization Scott Read CNL Eric Reichelt NRC Justin Rettaliata NAVSEA Gustavo Reyes INL-BEA Stephen Rhyne NuGen Brandon Ribic America Makes Jacob Rindler The Ohio State U.
Allen Roach INL Jennifer Robinson NNL Ken Ross PNNL David Rowenhorst NRL David Rudland NRC Ryann Rupp INL Michael Russell ORNL Hideaki Sadamatsu Hitachi-GE Nuclear Energy, Ltd.
Sujit Samaddar USNRC Eric Sansoucy CNL Raymond Santucci US Naval Academy Alyssa Schneider NRC Mohsen Seifi ASTM Jennifer Semple U.S. Navy lymari Sepulveda NRC Sam Sham ANL Jeff Simmons TAES Matthew Siopis ARL Gregory Smith NRL Laura Smith NRC Kumar Sridharan U. Wisconsin George Stopyak NNL James Stouch Precision Custom Components, LLC Amanda Stutzman Penn State U.
John Sulley Rolls-Royce Ben Sutton EPRI Yusuke Suzuki TAES Nicole Tailleart NRL Norihiko Tanaka Toshiba Energy Systems &
Solutions Corporation Robert Taylor NRC Kurt Terrani ORNL Kim Tran NSWCCD Austin Travis General Atomics Robert Tregoning NRC Elissa Trueman NSWC Carderock John Tsao NRC
A-4 Name Organization Caroline Vail NSWC Carderock Brian Van Luik Curtiss Wright-EMD Isabella van Rooyen INL Luisa Vener NNL Matthew Verrier DOE Jan-Albert Viljoen NRG Jillian Vlah BPMI Jay Wallace NRC Yanli Wang ORNL Albert Wavering NIST Chris Wax EPRI Johannes Weiser Evobeam GmbH Doug Wells NASA Martin Werz MPA Stuttgart Brian West NASA Tressa White NNL Dan Widrevitz NRC Chris Wiltz Framatome Paul Witherell NIST Brian Wittick NRC Udi Woy Nuclear AMRC Matt Yagodich BPMI James Yang ANSYS Mark Yoo NRC Austin Young NRC James Zess MCHX Technology Xuan Zhang ANL
A-5 Presenter Bios (alphabetically)
Marc Albert is a Senior Technical Leader in the Advanced Nuclear Technology Department (ANT) at EPRI. Marc manages and overseas the research related to Advanced Manufacturing and Materials within the nuclear industry. Prior to joining EPRI, Marc spent the first 10 years of his career as a Design Engineer with a nuclear steam supply system (NSSS) vendor including onsite support for new plant construction. Marc received his bachelors degree in Mechanical Engineering at the University of Pittsburgh and is a licensed professional engineer.
Bogdan Alexandreanu is a Principal Nuclear Materials Engineer in the Nuclear Science and Engineering Division at Argonne National Laboratory. Research interests center on Environmentally Assisted Cracking (EAC) in aqueous reactor environments, particularly on environmental effects on fatigue crack initiation and growth, stress corrosion cracking (SCC) of nickel alloys and weldments, including the effect of the welding parameters on nickel-base weld SCC susceptibility. Prior research includes the examination and evaluation of SCC susceptibility of materials from nuclear power plants that experienced SCC, such as nozzles and weldments from Davis-Besse plant (2002 and 2010) and weldments from V. C. Summer plant (2000).
Bogdan received MSc and PhD degrees in Nuclear Engineering and Radiological Sciences from The University of Michigan at Ann Arbor.
Clint Armstrong is the Advanced Manufacturing SME at Westinghouse Electric Company LLC. Clints technology development efforts cover a broad range of advanced manufacturing technologies including AM, hot isostatic pressing, advanced welding, and machining within Westinghouses Global Technology Office.
Clint has a Bachelor of Science in Industrial and Manufacturing Engineering from The Pennsylvania State University and a Bachelor of Science in Physics from Slippery Rock University of Pennsylvania.
Steve Attanasio has a Ph.D. in Metallurgy from MIT, and has been at Naval Nuclear Laboratory for 25 years where he has worked on core, plant, and steam generator materials corrosion and performance.
Steve currently works on applications, material properties, and microstructure studies of additively manufactured metals.
Meg Audrain joined the NRC in July 2008 as a materials engineer. She began her career as a technical reviewer in NRR in the subject areas of Alloy 600 stress corrosion cracking, degradation of nuclear metals, and HDPE. She currently works in the Office of RES as the technical lead for PWSCC crack growth rate studies and AMTs.
Pajazit Avdovic is the Innovation Manager for Additive Manufacturing and Senior Key Expert in Manufacturing at Siemens Energy AB Sweden. Pajazit has a Doctor of Philosophy of Engineering from the Lund University-Sweden. He gained his 30-year professional experiences in international organizations in Serbia and Siemens Energy, Sweden. Today Pajazit possesses a wide network of cooperation with many Swedish Universities, Research Institutes, and companies in the area of AM. He is author and co-author for several published articles and an owner of several patents in Subtractive and Additive Manufacturing. He is Chairman for Siemens Energy yearly conference Additive Next and part of the steering committee for AM related forums in Sweden. In 2017, Dr Avdovic was Project Manager for the project PERUN-Nuclear Power Plant replacement part which was HIGHLY COMMENDED for the Industrial Product Design TCT Award 2017.
Mark Barfoot oversees EWIs growing AM initiatives and helps EWI develop new AM technology opportunities. He directs the
A-6 Additive Manufacturing Consortium (AMC),
a national consortium of industry, government, academic and non-profit research organizations operated by EWI.
He also manages EWIs interest in the ASTM AM Center of Excellence (CoE),
which involves supervision of the industry consortia focused on AM standards development, ASTM direct-funded projects, education and training, and project bids that leverage the ASTM CoE brand.
Arne Claes is responsible for managing the equipment qualification (EQ) &
obsolescence program at ENGIE Nuclear Corporate. He graduated from the university of Leuven with a Master of Science in Electro-Mechanical Engineering. Arne was selected for the ENGIE nuclear trainee program and started his career in the instrumentation and control (I&C) maintenance division at the Doel Nuclear Power Plant. He successfully completed his traineeship and became responsible for developing and improving maintenance strategies on critical I&C equipment and managing critical I&C suppliers. Since 2017, he started working in the component engineering department and became responsible for developing and implementing an effective obsolescence program at the Doel Nuclear Power Plant.
As of 2020 he became responsible for the EQ & Obsolescence program at corporate level.
Jessica Coughlin is an Advisor Engineer with the Naval Nuclear Laboratory (NNL),
where she has spent the past fifteen years focusing on welding engineering and AM topics. Her recent work has involved fundamental research supporting the creation of quality standards for metal AM technologies. In her position as vice-chair of the American Welding Society D20 committee on AM, she played a pivotal role in the creation of the AWS D20.1 standard.
Jessica is currently serving as chair of the AWS D20 committee.
Matthew Di Prima is a Materials Scientist in the FDAs Office of Science and Engineering Laboratories, housed in the Center for Devices and Radiological Health.
His areas of research are investigating how the AM process can alter material properties, the interplay between corrosion and durability testing, and explant analysis.
Along with his research duties, he is the head of the AM Working Group which is spearheading efforts across the Agency to address how this technology affects medical devices and other regulated medical products.
Carolyn Fairbanks is a senior materials engineer at the NRC in the Vessels and Internals Branch in the Office of Nuclear Reactor Regulation, where the focus of her work involves the study of the neutron embrittlement of reactor pressure vessel materials and the fracture toughness of steels used in the fabrication of various nuclear components. Ms. Fairbanks has held positions in the NRCs Office of Nuclear Regulatory Research and former Division of New Reactors, addressing materials degradation mechanisms and aging issues. Prior to the NRC, Ms.
Fairbanks was a Materials Engineer at NIST.
Richard Fonda has worked at the U.S.
Naval Research Laboratory for more than 25 years on a variety of topics including high strength steels, joining technologies, three-dimensional microstructures, and AM.
In 2014, he also became a program officer for the Manufacturing Science programs at the Office of Naval Research, where he supports fundamental research on manufacturing technologies of interest to the Navy.
Brian Frew has been in the nuclear industry for more than 25 years and has been responsible for materials selection and fabrication requirements for reactor vessel and internal components. He has served as vice-chair and is a current member of the
A-7 ASME subgroup for Materials, Fabrication and Examination. His current role is the Consulting Engineer for Materials and Chemistry for GE Hitachi Nuclear Energy.
Lee Friant is a Sr. Staff Engineer at Exelon Nuclear Generation. Lee is responsible for governance, oversight and implementation of Fleet Steam Generator Program Engineering functions at Exelon PWR sites.
Lee also serves as Subject Matter Expert (SME) in Selective Leaching, failure analysis, metallurgy and NDE for Reactor Coolant System and Balance of Plant Materials Degradation issues at Exelons Nuclear plants.
David Gandy is a Senior Technical Executive in EPRIs Nuclear Materials area where he is responsible for technical oversight of major projects on powder metallurgy, advanced welding, AM, GEN IV alloys, and next-generation erosion/wear resistant alloys. Mr. Gandy has 36+ years of demonstrated leadership and excellence in materials and welding technologies supporting the power industry in the development and implementation of advanced life prediction methodologies of boiler, steam & gas turbine, reactor pressure vessels, and heat recovery steam generators. Mr. Gandy is recognized as an ASM International Fellow. He currently holds 13 U.S. Patents and has authored over 230 journal articles and technical reports.
Elizabeth Getto is an assistant professor of mechanical engineering at United States Naval Academy. She has a PhD from the University of Michigan in nuclear engineering and is a microstructure characterization specialist.
Michael Gorelik is the Chief Scientist for Fatigue and Damage Tolerance at the Federal Aviation Administration (FAA). He has over 25 years of experience in the areas of fracture mechanics, fatigue, damage tolerance, AM, characterization and modeling of material behavior and probabilistic methods. At the FAA, Dr.
Gorelik supports various certification programs, development of advisory materials and rulemaking activities across the Agency, training of FAA personnel, and research and evaluation of new technologies such as AM. He represented the FAA on America Makes Governance Board, serves as an advisor for the ANSI /
America Makes AMSC and ASTM AM COE, and is the Chair of the ASME / IGTI Structures and Dynamics Committee. He authored / co-authored over 60 journal papers and conference presentations, including many invited presentations and keynotes.
Joel Harrison is a research analyst and ASNT NDE Level III at PNNL. Prior to joining the PNNL team in 2019 he spent 39 years performing and supervising ASME Section XI inservice inspection and NDE examinations in the commercial nuclear power industry in the United States, Europe and Southeast Asia. He has extensive experience in writing and implementing ASME Section XI NDE certification programs and requirements. He holds four ASME Section XI, Appendix VIII (PDI) piping qualifications and was the first person to qualify an ultrasound imaging system for the detection of IGSCC at EPRI in 1983. He currently serves as Secretary for the ASME Section XI Working Group on Procedure Qualification and Volumetric Examination and a member of the Section XI Subgroup NDE as well as several related Task Groups.
Matthew Hiser is a materials engineer in the Corrosion and Metallurgy Branch in the Office of Nuclear Regulatory Research at the NRC. He joined the NRC in 2011 and has worked primarily on irradiation-assisted degradation of reactor internals, degradation of neutron absorber materials, spent fuel canister degradation, and AMTs.
A-8 David Huegel is a fellow engineer at Westinghouse and currently involved in Westinghouses efforts in the area of AM and specifically laser powder bed fusion to produce fuel related components. His background includes approximately 20 years in safety analyses and the last 13 years in fuel assembly design. Mr. Huegel was directly involved in Westinghouses efforts to install an additively manufactured thimble plugging device in Byron Unit 1 in the spring 2020 outage.
Kyle Johnson is the Director of Engineering for VRC Metal Systems. VRC Metal Systems is the largest US manufacturer of high pressure, hand-held, and portable cold spray equipment. Mr.
Johnson leads several projects funded by the US DOE for applying cold spray in nuclear applications. Mr. Johnson will talk today about cold spray applications in the nuclear industry.
Christopher Kantzos recently graduated from Carnegie Mellon University in 2019 completing his PhD in the Materials Science and Engineering department. His thesis work focused on machine learning approaches to surface roughness analysis.
He now works at the NASA Glenn Research Center (in Cleveland, Ohio) working in the High Temperature and Smart Alloys branch working on alloy development and Additive Manufacturing.
Brandon Lane is a mechanical engineer in the Intelligent Systems Division at NIST in Gaithersburg, MD. He leads the Metrology for Real-time Monitoring of Additive Manufacturing project, co-leads developments of the AM Metrology Testbed (AMMT), and is on the organizing committee for the AM Benchmark Test Series (AM-Bench).
Hilary Lane serves as the Director of Fuel and Radiation Safety at the NEI. She has over 10 years of experience in the nuclear field, including holding positions with the National Nuclear Security Administration (NNSA) in Washington, DC and Lawrence Livermore National Laboratory (LLNL) -
where she supported the U.S. nuclear deterrent life extension programs. She has also worked at the NRC on fuel cycle regulatory matters. Ms. Lane holds a B.S.
in Materials Science and Engineering from the University of Maryland, College Park and a Project Management Certification from George Washington University.
Mark Messner is a member of ANLs technical staff. His research focused on developing materials, design methods, and systems for high temperature concentrating solar power, nuclear, and aerospace applications. He is a member of the ASME Boiler & Pressure Vessel Code,Section III Committee Subgroup on High Temperature Reactors, and serves on and chairs several relevant ASME working groups covering high temperature reactor materials, design, and construction.
Shawn Moylan is a mechanical engineer and project leader in the Engineering Laboratory at NIST. He leads the Qualification for Additive Manufacturing Feedstocks, Machines, and Processes project. Shawn is also a member of the advisory committee for the ANSI/America Makes Additive Manufacturing Standardization Collaborative, the vice chair of ASTM F42.01 on Test Methods for Additive Manufacturing, and a member-at-large of ASMEs Council on Standards and Certification.
Steve Nardone is responsible for the ENGIE Thematic Lab Advanced Materials Technologies, which includes the AM activities and the ENGIE fleet of laser powder bed fusion equipment. He graduated from the University of Mons with a Master in Materials Science. Steve became an expert in the field of materials for conventional power plants with 14-years of experience in metallography, root cause analysis, remaining life assessment and creep damage evaluation of power
A-9 generation equipment. He has also acquired relevant experience in Quality Assurance and technical audits during production and repair of strategic spare parts. In his present position, he manages transversal and multidisciplinary projects in various fields of advanced materials for the energy sector, including the qualification of AM processes.
Robert Oelrich leads the Fuels & Materials Performance team within PNNLs National Security Directorate. Prior to joining PNNL, Robert led Westinghouses Accident Tolerant Fuel (ATF) program during which several new ATF technologies, such as chromium-coated cladding and uranium silicide, fuel were taken from concept to reactor insertion in just over 2 years. Prior to that, Roberts team supported the initial development of the 3D-printed thimble plug at the Columbia Fuel Fabrication Facility, which has now been inserted into Byron Unit 1.
Vincent Paquit is a senior research scientist and lead for the Energy Systems Analytics group in the Electrification and Energy Infrastructures Division at ORNL supporting two core missions of the Department of Energy: Energy sustainability and National Security. His research interests are in the fields of Artificial Intelligence, Computer Vision, and Image Processing, with a predilection for high performance image processing algorithms development. Dr. Paquit is also the Data Analytics lead for the ORNL Manufacturing Demonstration Facility (MDF) where his team is developing a Data Analytics Framework for Advanced Manufacturing.
This extensive digital platform aims at better understanding manufacturing processes for the purpose of part qualification and certification, and process control and correction. His vision, currently supported by DOE Advanced Manufacturing Office (AMO), has impacted multiple projects and programs at ORNL; in particular, the Transformational Challenge Reactor (TCR),
a program aiming at 3D printing high quality components for nuclear applications. For TCR, he is overseeing the digital, manufacturing, and characterization activities to support the development of the framework and associated data driven techniques that will accelerate the certification and validation of these components.
Dave Poole is a Chartered Engineer at Rolls-Royce Plc where he holds the position of Manufacturing Engineering Manager for AM in the Nuclear and Defense Sector. He began working in AM in 2007 and setup the first metal AM facility in Rolls-Royce in 2009. Since then he has developed the technology through a number of material alloy and application programs, and now leads a dedicated AM division with multiple teams, facilities and capabilities.
Daniel Porter currently is a Regulatory Scientist at the U.S. FDAs Division of Applied Mechanics researching the properties of AM lattice structures and AM facemask sealing efficacy. Dr. Porter also has experience as a Lead Reviewer in the Office of Orthopedic Devices (OHT6) within the Center of Devices and Radiological Health at the U.S. FDA. He holds a Bachelor and Master of Science in Mechanical Engineering from the University of Louisville (UofL). He completed nearly two years of internships at Sandia National Laboratories in New Mexico where he researched gas chromatography technologies for national security applications. Dr. Porter received his Ph.D. in Mechanical Engineering from UofL where he studied vibrational energy harvesting, MEMS technology, and AM. He completed his postdoctoral position at Southern Methodist University (SMU) in Dallas, Texas where he studied AM of ultraviolet industrial silicone and thermally curable medical grade silicone.
Bill Press is a Technical Specialist in component design within Rolls Royce Submarines. He has led technical projects
A-10 across a broad range of safety critical components and vessels, supporting their design, safety justification, manufacture and operation. Most recently, Bill has applied his specialist technical knowledge to drive forward the introduction of the Additive Manufacture Technology within the business in order to deliver important quality, cost and program benefits.
Pasi Puuko is the Research Team Leader in Advanced manufacturing technologies at VTT Technical Research Centre of Finland.
He has twenty years experience working in the field of research and has carried out various projects at national and international level as project manager or as work package leader, mainly related to digital fabrication and AM, especially for laser-beam powder bed fusion. His ambition is to promote and thus increase the usage of digital manufacturing technologies. He is a board member of Finish Rapid Prototyping Association.
Amarendra K. Rai has been with UES Inc.
since 1981 and is currently a Principal Research Scientist. For the last few years, he is involved in the development of materials damage restoration technologies including directed energy deposition and cold spray. Dr. Rai has worked extensively on the development of coatings utilizing various techniques including physical vapor deposition and thermal spray for a variety of applications.
George Rawls has over 35 years of experience in the design, analysis, and testing of systems, structures, and components, including extensive experience in the application of codes and standards to pressure vessels and piping systems. He is currently a Fellow for the American Society of Mechanical Engineers and a Chairman for the ASME Special Committee on Use of Additive Manufacturing for Pressure Retaining Equipment.
Justin Rettaliata has 19 years in industry and the federal government, working in mechanical engineering, systems engineering, and program management.
Justin is currently the Technical Warrant holder for additive manufacturing (AM) in charge of the development of specifications and standards for how the Naval Sea Systems Command (NAVSEA) adopts/utilizes AM and serves as the technical lead for AM for NAVSEA. Justin holds a B.S. in Mechanical Engineering from Lehigh University, a Masters in Business Administration from the College of William and Mary, and a Ph.D. in Systems Engineering from the George Washington University.
Brandon Ribic was named Technology Director of America Makes in October 2019.
Driven by the National Center for Defense Manufacturing and Machining (NCDMM),
America Makes is the national accelerator for AM and the first of nine Manufacturing Innovation Institutes (MIIs) established and managed by the U.S. Department of Defense (DoD) as public-private partnerships. Prior to joining NCDMM, Dr.
Ribic was a joining processes and AM materials specialist at Rolls-Royce Corporation. He led the Materials Technology Center efforts in AM process modeling and in-situ process monitoring.
His research focused on welding and AM processes for various titanium and nickel superalloy gas turbine engine components.
One of his most notable achievements is successfully developing, qualifying, and productionizing (TRL 7) the first ever CMSX-4 AM repair for Rolls-Royce.
Ken Ross is a Materials Research Engineer in the Energy Processes & Materials Group at PNNL. Ken is an expert in solid phase processes, such as cold spray and friction stir welding. Ken currently conducts research in nuclear, hydropower, defense, and automotive sectors for government and private stakeholders. After retiring from 40+
years in private industry, Mr. Lareau joined the PNNL on a part time basis working in the field on nondestructive testing
A-11 development and qualification. In this capacity, he supports the research efforts of various branches of the NRC, primarily Research, Nuclear Reactor Regulation and Nuclear Material Safety.
David Rowenhorst received his Ph.D. from Northwestern University in 2004 in Materials Science and Engineering and joined the NRL as a NRL Postdoctoral Associateship and in 2006 continuing on as a staff scientist in the Phase Transformations and Joining Section. His work concentrates on the 3D characterization of materials, concentrating on automated electron backscatter diffraction (EBSD serial-sectioning and X-ray tomography to analyze the evolution of grain boundary networks in polycrystalline materials and phase transformations in high strength steels and AM.
Raymond Santucci is an assistant research professor in the mechanical engineering department at the US Naval Academy. He completed his doctoral studies at the University of Virginia in Material Science and Engineering, specializing in corrosion and electrochemistry.
Mohsen Seifi is the global director of AM programs at ASTM International, responsible for AM center of excellence (CoE) and various AM programs while leading a team of technical experts in the field. In his role, he brings technical leadership to accelerate standardization activities across all ASTM AM related technical committees and building new partnerships/initiatives as well as development of new AM standards related programs within diverse ASTM portfolios.
He has 10+ years of managing and prioritizing multiple programs/projects in research/business environments with strong academic/business development background. He has also appointment as an adjunct faculty at Case Western Reserve University in OH, USA. Part of his PhD work focused on rapid qualification methods for metal AM processes. He has co-authored 40+ peer reviewed publications that are cited 1800+ times and has presented 60+
invited and keynote lectures at various technical meetings, industries and government agencies while also receiving various technical society honors and awards.
Matt Siopis is a materials research engineer and technical lead for the Army Research Laboratory (ARL) cold spray effort. Matt is responsible for the development of materials, process conditions, equipment, implementation and transition of cold spray technology. Matt is author to several cold spray patents related to nozzle design and hybrid manufacturing.
Kumar Sridharan is Professor in the Departments of Nuclear Engineering and Materials Science & Engineering at the University of Wisconsin, Madison. His expertise spans a broad spectrum of areas in materials science, including nuclear reactor materials, corrosion, cold spray technology, characterization and testing of materials, interfaces of materials and manufacturing, and industrial applications.
Prof. Sridharan has made leading contributions in the areas of materials compatibility for Molten Salt Reactors (MSRs) and ATF cladding development and is Fellow of American Society for Materials, Fellow of American Nuclear Society, and Fellow of Institute of Materials (UK).
John Sulley is a European Registered Engineer and UK Chartered Engineer, and a Fellow of the UK Institution of Mechanical Engineers. He has 36 years of design, manufacturing development, and justification experience of nuclear plant components working for Rolls-Royce Submarines. He has held positions of Chief Engineer, Chief Design Engineer, Chief of Engineering Capability, and Valves Internal Authority, and is currently a Rolls-Royce Associate Fellow. John is a member of two
A-12 ASME Section III design code committees -
valves and pumps. He has been heavily involved in instigating and implementing advanced manufacturing techniques such as hot isostatic pressing and AM.
Kurt Terrani is a Senior Staff Scientist at ORNL and the Director of the Transformational Challenge Reactor (TCR) program for the DOE Office of Nuclear Energy. He joined the laboratory as a Weinberg Fellow in the Nuclear Fuel Materials Group in 2010 after completing his Ph.D. in nuclear engineering at University of California, Berkeley. His research focused on fundamental aspects of nuclear fuel and materials manufacturing, radiation effects, and behavior.
Isabella van Rooyen holds a Ph.D. in physics, M.Sc. in metallurgy, and an MBA.
She is the National Technical Director:
Advanced Methods for Manufacturing Program for the US Department of Energy.
She is also a distinguished staff scientist at INL where she has led the advanced electron microscopy and micro-analysis examinations for the Advanced Gas Reactor TRISO fuel development program since 2011. In addition, she is the principal investigator of a variety of research projects for nuclear applications that focus on areas including TRISO coated particles, AM qualification reviews and AMM.
Douglas Wells is a structural materials engineer in the Materials and Processes Laboratory at the NASA Marshall Space Flight Center. Doug has twenty-five years of experience in fatigue, damage tolerance, and fracture control of flight structures. For the past seven years, he has focused on developing methodologies for the qualification and certification of additively manufactured spaceflight hardware, including the development of the first NASA standard to establish requirements for incorporating additively manufactured hardware into flight vehicles for NASA and its commercial partners. In addition to standards development for NASA, Doug is actively engaged with the broader international standards community working in AM, including ASTM and SAE. Currently, much of his time is spent on the interpretation of certification requirements for additively manufactured hardware on a variety of NASA missions. Doug came to NASA following his Bachelor of Science degree in Aerospace Engineering at Virginia Tech and also holds a Master of Science in Mechanical Engineering from Stanford University.
Christopher Wiltz has nearly 30 years in the nuclear fuel assembly research &
development, design, manufacturing and licensing. Wiltz is based in Richland, Washington and currently functions as the worldwide manager of Framatomes design to cost and design to manufacture activities, which includes implementation and industrialization of new products and technologies both internal and external to Framatome.
Tressa White has been a research engineer at the Naval Nuclear Laboratory in New York for the last 15 years investigating both core and plant structural materials performance. Most recently, she's delved into justifying AM techniques, specifically laser-powder bed fusion, to be a qualified production method for the nuclear Navy.
Today, Tressa will share how NNL certified the first metal additive hardware to go in service in a submarine propulsion plant and how that action, more so than the part, is critical to their AM vision.
Mark Yoo is a materials engineer in the Component Integrity Branch in the Office of Nuclear Regulatory Research at the NRC, where he is primarily focused on AMTs and advanced non-light water reactors. He joined the NRC in 2010 in the Office of Nuclear Reactor Regulation where he focused on license renewal and materials degradation mechanisms and aging of the reactor vessel and vessel internals.