Rev 3 to Procedure 11951-C, Fuel Handling Operator & Fuel Handling Supervisor Qualification Checklist| ML20215M892 |
| Person / Time |
|---|
| Site: |
Vogtle  |
|---|
| Issue date: |
10/15/1986 |
|---|
| From: |
GEORGIA POWER CO. |
|---|
| To: |
|
|---|
| Shared Package |
|---|
| ML20215M870 |
List: |
|---|
| References |
|---|
| 11951-C, NUDOCS 8611030419 |
| Download: ML20215M892 (9) |
|
|
|---|
Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML20217G6571999-10-13013 October 1999
Proposed Tech Specs Pages,Revising TS to Permit Relaxation of Allowed Bypass Test Times & Completion Times for LCOs 3.3.1 & 3.3.2
ML20217B1221999-10-0404 October 1999
Proposed Tech Specs Pages,Revising TS 5.5.6 Incorporating Exceptions to Reg Guide 1.35,rev 2,as Described in FSAR Section 3.8.1.7.2 Re Prestressed Concrete Containment Tendon Surveillance Program
ML20212F4891999-09-22022 September 1999
Proposed Rev to TS SR 3.8.1.13,to Include Upper Limit for DG Loading for 2 H Portion of SR
ML20211J5511999-08-30030 August 1999
Proposed Tech Specs,Raising Level of Approval Authority for Deviations from Guidelines Provided to Minimize Unit Staff Overtime Specified in TS 5.2.2
ML20211J7281999-08-26026 August 1999
Proposed Tech Specs Updating Versions of LCO 3.0.4 & SR 3.0.4 to Be in IAW with Versions of LCO 3.0.4 & SR 3.0.4 as Noted in Rev 1 to NUREG-1431
ML20211E9111999-08-24024 August 1999
Proposed Tech Specs,Relaxing Slave Relay Test Frequency from Quarterly to Refueling Frequency
ML20196L3181999-05-18018 May 1999
Proposed Tech Specs SRs 3.8.1.3 & 3.8.1.13 Reducing Loading Requirements for DGs
ML20205S3791999-04-19019 April 1999
Proposed Tech Specs Revising SR 3.3.5.2 & Associated Bases to Allow Loss of Voltage & Degraded Voltage Trip Setpoints to Be Treated as Nominal Values in Same Manner as Trip Setpoints for RTS & ESFAS Instrumentation
ML20205Q7901999-04-13013 April 1999
Proposed Tech Specs,Updating Versions of LCO 3.0.4 & SR 3.0.4 to Be Consistent with Versions of LCO 3.0.4 & SR 3.0.4 as Appear in Rev 1 to NUREG-1431
ML20154M9961998-10-15015 October 1998
Proposed Tech Specs,Deleting & Modifing Conditions Which Were Issued with Licenses That Are Now Obsolete
ML20151U2011998-09-0303 September 1998
Proposed Tech Specs Pages for Amends to Licenses NPF-68 & NPF-81,changing TS to Support Replacement of Nuclear Instrumentation Sys Source Range & Intermediate Range Channels & post-accident Neutron Flux Monitoring Sys
ML20236R4661998-07-13013 July 1998
Proposed Tech Specs Eliminating Periodic Response Time Testing Requirements on Selected Sensors & Selected Protected Channels
ML20154Q8611998-06-30030 June 1998
Proposed Tech Specs Bases Since Implementation of Improved TS on 970123 Through Aug 1998
ML20206N3131998-06-30030 June 1998
Proposed Tech Specs Re Replacement of Nuclear Instrumentation Sys Source & Intermediate Range Channels & post-accident Neutron Flux Monitoring Sys
ML20236F1631998-06-26026 June 1998
Proposed Tech Specs Revising LCO 3.3.6 Re CVI Instrumentation & LCO 3.9.4 Re Containment Penetrations to Facilitate Outage Planning
ML20248K5801998-05-25025 May 1998
Rev 1 to VEGP Units 1 & 2 Second 10-Yr Interval Valve IST Program
ML20247K5041998-05-15015 May 1998
Proposed Tech Specs Pages Revising New Program 5.5.18 to Extent That Items B,C & D. Refer to LCO Action Statement & Bases Insert for New Required Actions B.5.1 & B.5.2
ML20247G9471998-05-0808 May 1998
Proposed Tech Specs Section 5.5.7, RCP Flywheel Insp Program, Specifying Alternate Flywheel Insp Once Every Ten Years
ML20216J4971998-04-16016 April 1998
Proposed Tech Specs 3.3.1 & 3.3.2 Re Reactor Trip Sys & ESFAS Instrumentation
ML20199E5351998-01-27027 January 1998
Complete Replacement of All Typed Pages of TS Changes Submitted in Ltr LCV-0849-E
ML20199A4131998-01-22022 January 1998
Proposed Tech Specs Adding Conditions for DG for Extended DG Completion Time of Fourteen Days
ML20198P6961998-01-16016 January 1998
Revised Spent Fuel Pool Boron Dilution Analysis
ML20216B2621997-12-11011 December 1997
Rev 14 to ODCM, for Vogtle Electric Generating Plant
ML20199G3901997-11-20020 November 1997
Proposed Tech Specs Facilitating Treatment of Trip Setpoints as Nominal Values & Correct Certain Typos
ML20199J6651997-11-20020 November 1997
Proposed Tech Specs Pages Changing Capacity of Unit 1 Spent Fuel Storage Pool from 288 to 1476 Assemblies & Revising Design Features Description to Reflect Criticality Analyses & Storage Cell Spacing
ML20211N2451997-10-10010 October 1997
Proposed Typed Tech Specs Pages,Revising Credit for Boron & Enrichment Increase for Fuel Storage
ML20217H9051997-08-0808 August 1997
Proposed Tech Specs Pages Re Credit for Boron & Enrichment Increase for Fuel storage.W/marked-up Pages
ML20141A8541997-06-13013 June 1997
Proposed Tech Specs Revising LCO 3.4.10 to Reduce Nominal Set Pressure by 1% to 2460 & Increase Tolerance to +2%
ML20148E6481997-05-15015 May 1997
Rev 0 to VEGP Units 1 & 2 Second 10-Yr Interval Pump IST Program
ML20148E6611997-05-15015 May 1997
Rev 0 to VEGP Units 1 & 2 Second 10-Yr Interval Valve IST Program
ML20133L3081997-01-10010 January 1997
Proposed Tech Specs Table 3.3.1-1 Re Amends 96 & 74
ML20140J4591996-12-13013 December 1996
Rev 11 to ODCM for Vogtle Electric Generating Plant,
ML20138F1001996-12-13013 December 1996
Revs 10 & 11 to ODCM, Part 2
ML20132C4711996-12-12012 December 1996
Proposed Tech Specs Re Physical Security & Contingency Plan
ML20134J9841996-10-0808 October 1996
/Unit 2 Fuel Assembly Insp Program
ML20117N5851996-09-13013 September 1996
Proposed Tech Specs 3.8.1 Re AC Electrical Sources
ML20129A6461996-09-11011 September 1996
Proposed Tech Specs,Providing Updated Documentation for License Amends Application for Southern Nuclear to Become Licensed Operator
ML20117C4151996-08-23023 August 1996
Proposed Tech Specs to Convert Units 1 & 2 Based on NUREG 1431
ML20117N6361996-06-17017 June 1996
Proposed Tech Specs,Clarifying Requirements of TS SR 4.8.1.1.2.j (2) That Prescribes Pressure Test of Portions of Diesel fuel-oil Sys Designed to Section Iii,Subsection Nd of ASME Code
ML20117N6471996-06-17017 June 1996
Proposed Tech Specs Section 5.3.1,allowing Use of Fuel Assemblies Containing Fuel Rods Clad W/Zirlo
ML20111A5501996-05-0606 May 1996
Proposed Tech Specs,Incorporating Extended DG AOT to 14 Days from Discovery of Failure to Meet Lco,Provided Standby Auxiliary Transformer Available
ML20106H2391996-03-31031 March 1996
Rev 10 to Gap Security Dept Vogtle Electric Generating Plant Nuclear Security Training & Qualification Plan
ML20101D4151996-03-0505 March 1996
Proposed Tech Specs Re Conversion Based on NUREG-1431
ML20100G0371996-02-19019 February 1996
Proposed Tech Specs Based on NUREG-1431
ML20097A3171996-01-30030 January 1996
Proposed Improved TS Based on NUREG-1431
ML20096G8241996-01-22022 January 1996
Inservice Insp Program, for VEGP-2
ML20095J2501995-12-22022 December 1995
Proposed Tech Specs,Allowing Use of Option B of 10CFR50,App J for Type B & C Testing
ML20094N4071995-11-20020 November 1995
Proposed Tech Specs,Converting Existing TS to Format & Content of NUREG-1431
ML20093K2281995-10-16016 October 1995
Proposed Tech Specs,Adding Footnote to Spec 4.6.1.2.d Stating That Type B & C Tests Scheduled for Refueling Outage 1R6 Will Be Conducted Per Option B of 10CFR50 App J & Using Guidance of RG 1.163,Rev 0
ML20098C1471995-10-0202 October 1995
Proposed Tech Specs,Allowing Next Type a Test to Be Rescheduled
1999-09-22
[Table view]
Category:TEST/INSPECTION/OPERATING PROCEDURES
MONTHYEARML20248K5801998-05-25025 May 1998
Rev 1 to VEGP Units 1 & 2 Second 10-Yr Interval Valve IST Program
ML20216B2621997-12-11011 December 1997
Rev 14 to ODCM, for Vogtle Electric Generating Plant
ML20148E6611997-05-15015 May 1997
Rev 0 to VEGP Units 1 & 2 Second 10-Yr Interval Valve IST Program
ML20148E6481997-05-15015 May 1997
Rev 0 to VEGP Units 1 & 2 Second 10-Yr Interval Pump IST Program
ML20138F1001996-12-13013 December 1996
Revs 10 & 11 to ODCM, Part 2
ML20140J4591996-12-13013 December 1996
Rev 11 to ODCM for Vogtle Electric Generating Plant,
ML20134J9841996-10-0808 October 1996
/Unit 2 Fuel Assembly Insp Program
ML20106H2391996-03-31031 March 1996
Rev 10 to Gap Security Dept Vogtle Electric Generating Plant Nuclear Security Training & Qualification Plan
ML20096G8241996-01-22022 January 1996
Inservice Insp Program, for VEGP-2
ML20078A3771994-05-12012 May 1994
Vols 1 & 2 of Vogtle Electric Generating Plant Unit 1 Readiness Review Module 4 Mechanical Equipment & Piping Program
ML20069L8241994-03-30030 March 1994
Rev 8 to ISI-P-008, Inservice Test Program for Vogtle Electric Generating Plant Unit 1
ML20069L8311994-03-30030 March 1994
Rev 5 to ISI-P-016, Inservice Test Program for Vogtle Electric Generating Plant Unit 2
ML20082V2871994-01-0101 January 1994
Offsite Dose Calculation Manual, Rev 9
ML20064C7431993-11-0505 November 1993
Rev 6 to ISI-P-006, ISI Program for Vogtle Electric Generating Plant Unit 1
ML20064C7471993-11-0505 November 1993
Rev 6 to ISI-P-014, ISI Program for Vogtle Electric Generating Plant Unit 2
ML20035F5601993-04-0505 April 1993
Rev 5 to Inservice Insp Plan (ISI-P-014) for Vogtle Electric Generating Plant,Unit 2
ML20035F0721993-03-22022 March 1993
Rev 7 to Inservice Test Program (ISI-P-008) for Vogtle Electric Generating Plant,Unit 1
ML20035F0731993-03-22022 March 1993
Rev 4 to Inservice Test Program (ISI-P-106) for Vogtle Electric Generating Plant,Unit 2
ML20094K1781992-03-0404 March 1992
Rev 3 to Vogtle Electric Generating Plant Process Control Program
ML20092G7441992-02-20020 February 1992
Undated Draft Site Safety Manual. Supporting Documentation Encl
ML20092F7091992-02-19019 February 1992
Instructions GEK-45405B, Differential Voltage Relays Types: PVD21A,PVD21B,PVD21C & PVD21D
ML20094K1721991-12-31031 December 1991
Draft, ODCM for Vogtle Electric Generating Plant
ML20086Q7231991-12-0404 December 1991
Rev 7 to Procedure 91202-C, Activation & Operation of Operations Support Ctr
ML20129J2961991-09-13013 September 1991
Rev 3 to Procedure 23985-1, RCS Temporary Water Level Sys
ML20091L7891991-07-0303 July 1991
Rev 5 to Procedure 29537-C, Outage Scheduling
ML20079G4971991-06-10010 June 1991
Rev 5 to ISI-P-006, Inservice Insp Program for Vogtle Unit 1
ML20079G5071991-06-10010 June 1991
Rev 4 to ISI-P-014, Inservice Insp Program for Vogtle Unit 2
ML20091L7991991-04-22022 April 1991
Rev 6 to Training Lesson Plan LO-LP-39201-06-C, Introduction to Ts
ML20091L7771991-04-17017 April 1991
Rev 21 to Procedure 10000-C, Conduct of Operations
ML20129H6151991-03-20020 March 1991
Rev 7 to Procedure 10004-C, Shift Relief. Supporting Documentation Encl
ML20129J0311990-09-18018 September 1990
Rev 4 to Procedure PTDB-1 Tab 8.0, Pictorial Aids. Supporting Documentation Encl
ML20043H3091990-06-15015 June 1990
Rev 3 to ISI-P-014, Inservice Insp Program
ML20043B6381990-05-22022 May 1990
Rev 2 to ISI-P-016, Inservice Testing Program
ML20043B6321990-05-22022 May 1990
Rev 5 to ISI-P-008, Inservice Testing Program
ML20091L8131990-05-22022 May 1990
Outdated Rev 0 to Training Lesson Plan RQ-LP-63107-00, Requal Current Events
ML20113G6141990-05-15015 May 1990
Rev 0 to VEGP-22981-C, Calcon Pneumatic Temp Sensor Calibr 1TSH-19110-1TSH-19119,1TSH-19146,1TSH-19153,2TSH-19110- 2TSH-19119,2TSH-19146 & 2TSH-19153. Supporting Documentation Encl
ML20113G6051990-05-0808 May 1990
Rev 3 to 14210-2, Containment Bldg Penetrations Verification - Refueling
ML20034C1061990-04-26026 April 1990
Rev 4 to Inservice Insp Program First 10-Yr Interval
ML20129H9081990-04-16016 April 1990
Rev 3 to Procedure PTDB-1 Tab 8.0, Pictorial Aids. Supporting Documentation Encl
ML20129G8451990-04-0505 April 1990
Rev 19 to Procedure 14980-1, Diesel Generator Operability Test
ML20113G3421990-04-0404 April 1990
Procedure T-ENG-90-016, DG1A J.W. Temp Monitoring & Recording
ML20129F7161990-03-29029 March 1990
Rev 2 to Procedure T-FND-90-15, Method Visual
ML20092F8621990-03-28028 March 1990
Rev 1 to Procedure T-ENG-90-11, A-Train Undervoltage Test
ML20092F9691990-03-28028 March 1990
Rev 0 to T-ENG-90-15, Unit One Train a DCP 88-V1N0070 Sequencer Functional Test. Supporting Documentation Encl
ML20092F7521990-03-27027 March 1990
Rev 20 to 13145-1, Diesel Generators
ML20092F8741990-03-26026 March 1990
Rev 3 to Procedure VEGP 00053-C, B-Train Undervoltage Test
ML20092F8481990-03-25025 March 1990
Rev 2 to Generator & Engine Control Panel Functional Test Procedure 27563-C, Power & Signal Removal/Replacement Data Sheet
ML20092H0391990-03-23023 March 1990
Rev 16 to VEGP-10000-C, Conduct of Operations
ML20092F5271990-03-21021 March 1990
Data Sheet 1 to Rev 12 to VEGP-10006-C, Reactor Trip Rept. Supporting Documentation Encl
ML20092F7341990-03-19019 March 1990
Rev 16 to Procedure 25717-C, Torquing Electrical Type Connections
1998-05-25
[Table view] |
Text
-
Approval Proc"duro No.
Vogtle Electric Generating Plant 11951-C 4
h' I K@lGw)
NUCLEAR OPERATIONS g,y,3,on no, b
Date 3
COMMON Georgia Power
/c/6/66 unit ease no PLANT A. W. V0GTLE FUEL HANDLING OPERATOR AND FUEL HANDLING SUPERVISOR QUALIFICATION CHECKLIST NAME:
EMPLOYEE NO.:
I.-
SCHEDULED COMPLETION DATE:
CHECKLIST APPROVED FOR USE OPERATIONS SUPT./DATE 1
l 1
0611030419 861027 PDR ADOCK 05000424 E
PDR rwo,s ex
tRoCEDURE No.
REVISloN PAGE No.
i 11951-C 3
2 of 9 1.0 PURPOSE The purpose of this procedure is to ensure an acceptable level of competency and proficiency of all Fuel Handling Operators and Fuel Handling Supervisors.
2.0 SCOPE 2.1 All Plant Operators assigned the task of Fuel Handling Operator must be qualified in accordance with the applicable checklist (s).
2.2 All SROs assigned the task of Fuel Handling Supervisor must be qualified in accordance with the applicable checklist (s).
3.0 METHOD The trainee's supervisor shall review the applicable a.
qualification checklist to determine what training is' required for the trainee.
This review shall be based on FSAR commitments, the individual's experience, background and training records.
b.
The supervisor will obtain the Operations Superintendent's approval of the proposed training, then review the checklist with the trainee.
Once a checklist item is completed the Training c.
Instructor, trainee's supervisor, or other qualified person assigned to evaluate the trainee will sign and date the qualification checklist signifying successful completion of that item.
d.
After all required training is completed the trainee's supervisor will review the Qualification Checklist for completeness and sign the appropriate ' locks of Section o
B of the checklist.
The trainee's supervisor will then submit the qualification checklist to the Operations Superintendent.
e.
Once completed, the qualification checklist will be retained by the Training Superintendent as a training record.
3
.e' PROCEDURE NO.
REVISION PAGE NO-11951-C 3
3 of 9 EMPLOYEE:
SECTION A:
SYSTEM QUALIFICATION:
Operations Department personnel must obtain a satisfactory knowledge of the applicable plant systems.
This will be demonstrated by successful completion of direct manipulation of the system involved to the satisfaction of the qualified individual assigned to verify the trainee's knowledge.
SECTION A-1:
GENERAL General Employee Training successfully completed
/
cws
. ~..... _,,
PROCEDURE No.
REVISloN PAGE No.
11951-C 3
4 of 9 FUEL HANDLING OPERATOR QUALIFICATION PART fl SECTION A-2 1)
Technical classroom lecture covering the spent fuel ~ cask bridge crane, new fuel assembly handling tool, rod cluster control assembly handling tool, new fuel storage racks, fuel handling area layout, sequence of events associated with new fuel receipt, unloading, inspection and storage.
/
2)
Operation of the spent fuel cask bridge crane (all components except 125 ton main hoist).
/
3)
Demonstrated Crane Operator Flagman signaling techniques.
capability.
/
-7 4)
Demonstrated basic rigging techniques capability for light load handling systems.
/
5)
Simulated fuel handling ope 7..itions (Part #1)
A)
Upendinfuelshippingcontainer.of dummy fuel assembly secured to st of new
/
B)
Latching and unlatching of new fuel assembly handling tool to dummy fuel assembly.
/
C)
Movement of dummy fuel assembly suspended from the new fuel assembly handling tool utilizing the spent fuel cask bridge crane monorail unit.
/
D)
Latching and unlatching of rod cluster control avsembly handling tool to dummy rod cluster control assembly.
/
7C3445
e
. PROCEDURE No.
REVISloN PAGE No.
11951-C 3
5 of 9 E)
Cleaning techniques for the new fuel assembly handling tool and rod cluster control assembly handling tool.
/
F)
Unsecuring/ securing dummy fuel assembly to strongback of new fuel shipping container.
/
G)
Movement of dummy fuel assembly into/from new fuel shipping container utilizing the spent fuel cask bridge crane monorail.
/
REMARKS:
.s SECTION B-2 FINAL QUALIFICATION DETERMINATION NOTE:
Part 1 qualification is for new fuel assembly handling during new fuel receipt unloading, inspection, storage and subsequent new fuel movements utilizing the spent fuel cask bridge crane.
1)
Qualification checklist complete / recommended for qualification " Fuel Handling Operator Part #1".
/
Trainee's Supervisor Date 2)
Qualified as " Fuel Handling Operator Part #1".
l l
j Operations Supt.
Date l
l l
703445
)
PfoCEDURE No.
REVISION PAGE Wo.
11951-C 3
6 of 9 FUEL HANDLING OPERATOR QUALIFICATION PART #2 AND FUEL HANDLING SUPERVISOR QUALIFICATION SECTION A-3 1)
Technical classroom lecture covering the fuel handling machine, new fuel elevator, new fuel assembly handling tool, spent fuel assembly handling tool, burnable poison rod assembly handling tool, new fuel storage racks, spent fuel storage racks, Fuel Handling Building layout, sequence of events associated with new fuel receipt and normal refueling operations.
/
2)
Operation of the fuel handling machine.
/
3)
Operation of the new fuel elevator.
/
4)
Operation of the burnable poison rod assembly handling tool.
/
5)
Simulated fuel handling operations (Part #2)
A)
Movement of the dummy fuel assembly suspended from the new fuel assembly handling tool between the new fuel storage racks and the new fuel elevator utilizing the fuel handling machine.
/
B)
Latching and unlatching of the spent fuel assembly handling tool to the dummy fuel assembly.
/
C)
Movement of the dummy fuel assembly suspended from the spent fuel assembly handling tool between the new fuel elevator and the spent fuel storage racks and/or the transfer system upender utilizing the fuel handling machine.
/
REMARKS:
rows
PROCEDURE No.
REVISloN PAGE NO.
11951-C 3
7 of 9 SECTION B-3 FINAL QUALIFICATION DETERMINATION NOTE:
Part 2 qualification is for new fuel movements associated with new fuel receipt, initial core load and normal refueling operations utilizing the fuel handling machine and new fuel elevator.
1)
Qualification checklist complete / recommended for qualification Fuel Handling Operator Part #2.
/
Trainee's Supervisor Date 2)
Qualified as Fuel Handling Operator Part #2.
/
Operations Supt.
Date 3)
Qualified as " Fuel Handling Supervisor Part #2.
.a
/
Operations Supt.
Date NOTE:
There is no requirement for a Fuel Handling Supervisor Part 1.
N3445 L
, PROCEDURE No.
REVIStoN PAGE Wo.
11951-C 3
8 of 9 FUEL HANDLING OPERATOR QUALIFICATION PART #3 AND TUEL HANDLING SUPERVISOR QUALIFICATION SECTION A-4 1)
Technical classroom lecture covering the Fuel Transfer System, Sigma refueling machine, refueling machine monorail unit, control rod drive shaft unlatching tool, control rod drive shaft handling tool, thimble plug storage rack, rod cluster assembly storage rack, control rod drive shaft storage rack, containment refueling area layout, sequence of events associated with initial core load and refueling operations or Senior Reactor Operator Training Program Procedure 60601-C, " Senior Reactor Operator Licensed Operator Training Program" Section 4.1.3.2b(5).
I
/
2)
Operation of the Fuel Transfer System.
/
3)
Operation of the Sigma refueling machine.
/
4)
Operation of the refueling machine monorail unit.
/
5)
Operation of the control rod drive shaft unlatching tool.
(Not required for initial core load)
/
j 6)
Operation of the control rod drive shaft handling tool.
(Not required for initial core load) 1 i
/
7)
Simulated fuel handling operations (Part #3) l A)
Movement of dummy fuel assembly with the Fuel Transfer System.
/
B)
Movement of dummy fuel assembly with the Sigma refueling machine between the Fuel Transfer System and the reactor core.
/
i roun
r j ! PROCEDURE No.
REVISloN F AGE No.
11951-C 3
9 of 9 k
C)
Movement of dummy rod cluster assembly with Sigma refueling machine between the dummy fuel assembly and the rod cluster control assembly storage rack.
/
D)
Movement of dummy thimble plug with Sigma refuel'ng machine between the dummy fuel assembly and the thimble plug storage rack.
/
REMARKS:
- I.
SECTION B-4:
FINAL QUALIFICATION DETERMINATION NOTE:
Part 3 qualification is for new fuel movements / component movements associated with initial core load, refueling operations utilizing the Fuel Transfer f"
System, Si equipment /gma refueling machine and associated tools.
1)
Qualification checklist complete / recommended for qualification " Fuel Handling Operator Part #3".
/
Trainee's Supervisor Date 2)
Qualified as Fuel Handling Operator Part #3.
1
/
l Operations Supt.
Date 3)
Qualified as Fuel Handling Supervisor Part 13.
/
Operations Supt.
Date l
l i
I 4 3445
.,, _ _ _.,.