ML20211E347

From kanterella
Jump to navigation Jump to search
Final Deficiency Repts 84-06(BY) & 84-14(BW) Re Large Laminar Indication in Steam Generator Snubber Piston Rod End Blade.Initially Reported on 840731.Rod End & Six End Caps Replaced
ML20211E347
Person / Time
Site: Byron, Braidwood, 05000000
Issue date: 06/04/1986
From: Miosi A
COMMONWEALTH EDISON CO.
To: James Keppler
NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION III)
References
1751K, 1751K(BW), 84-06(BY), 84-14(BW), 84-6(BY), NUDOCS 8606130325
Download: ML20211E347 (2)


Text

omA s

Z }- 72 West Adams Street, Chicigo, Illinois Commonwealth Edison

'd

\\

Address Reply to: Post Office Box 767 Chicago, Illinois 60690-0767 June 4, 1986 Mr. James G.

Keppler Regicnal Administrator U.S. Nuclear Regulatory Commission Region III 799 Roosevelt Road Glen Ellyn, IL. 60137

Subject:

Byron Station Units 1 and 2 Braidwood Station Units 1 and 2 10 CFR 50.55(e) Final 84-06 BY and 84-14 BW Report on Steam Generator Snubber Piston Rod Lamination NRC Docket Nos. 50-454/455 and 50-456/457

Reference:

(a)

E.D.

Swartz letter to J.G.

Keppler dated July 31, 1984 (b)

E.D.

Swartz letter to J.G.

Keppler dated September 25, 1984

Dear Mr. Keppler:

The above references provided information concerning a deficiency reportable pursuant to 10CPR50.55(e) concerning a large laminar indication in the steam generator snubber serial number 4 piston rod end blade supplied by the Boeing Engineering and Construction Company for Byron and Braidwood Stations.

The purpose of this letter is to provide an updated status of the corrective actions taken to resolve this issue and is considered to be a Final Report.

We have completed the examination of the Steam Generator Snubber materials.

The examination was accomplished by ultrasonic testing using ITT Grinnell's approved procedures (UTE-1 Rev. 5).

The acceptance criteria used was the ASME Code Section III 1974 Winter 74 addendum.

The results of the exam yielded 10 end caps and 1 rod end with unacceptable indications.

The rod end and 6 end caps were replaced.

2 end caps were weld repaired to within code requirements and an analysis was performed which accepted the last 2 end caps.

8606130325 860604 JUN 6 E$$

PDR ADOCK 05000454 g

PDR

r-

.... The documentation can be made available for your review.

If you have any questions concerning this matter please contact this office.

Very truly yours, h&

A. D.

osi Nuclear Licensing Administrator

/klj cc:

Byron Resident Inspector Braidwood Resident Inspector 1751K J

-