Preliminary Rev 0 to Wps 01-43-T-801, Preliminary Weld Procedure for Perry Nuclear Power Plant Feedwater Nozzle Repair| ML20205C635 |
| Person / Time |
|---|
| Site: |
Perry  |
|---|
| Issue date: |
03/16/1999 |
|---|
| From: |
ENTERGY OPERATIONS, INC. |
|---|
| To: |
|
|---|
| Shared Package |
|---|
| ML20205C622 |
List: |
|---|
| References |
|---|
| WPS-01-43-T-801, WPS-1-43-T-801, NUDOCS 9904010286 |
| Download: ML20205C635 (9) |
|
Similar Documents at Perry |
|---|
Category:TECHNICAL SPECIFICATIONS & TEST REPORTS
MONTHYEARML20216E4791999-09-0909 September 1999
Proposed Tech Specs Revising Allowable Values for CST Low Water Level Limits from Greater than or Equal to 59,700 Gallons to Greater than or Equal to 90,300 Gallons
ML20216E4631999-09-0909 September 1999
Proposed Tech Specs Change Eliminating Requirement in EPP to Sample Lake Erie Sediment in Perry & Eastlake Plant Area for Corbicula,Since Corbicula & Zebra Mussels Have Already Been Identified & Control & Treatment Plans Are Implemented
ML20211P2871999-09-0909 September 1999
Proposed Tech Specs Pages,Increasing Present 100% Authorized Rated Thermal Power Level of 3579 Megawatts Thermal to 3758 Megawatts Thermal
ML20210M7851999-08-0404 August 1999
Proposed Tech Specs 3.9.1,incorporating Addl Option Into Required Actions When Refueling Interlocks Are Inoperable
ML20209B3391999-06-28028 June 1999
Simulator Four Yr Test Rept
ML20196A2021999-06-17017 June 1999
Proposed Tech Specs SRs Implementing 24-month Operating Cycle at Pnpp
ML20205C6351999-03-16016 March 1999
Preliminary Rev 0 to Wps 01-43-T-801, Preliminary Weld Procedure for Perry Nuclear Power Plant Feedwater Nozzle Repair
ML20204E4971999-03-15015 March 1999
Proposed Tech Specs,Correcting Typos Found in Table 3.3.6.1-1
ML20207K1041999-03-0404 March 1999
Proposed Tech Specs Improving Licensing & Design Basis for Isolation of FW Penetrations
ML20206Q3571999-01-0606 January 1999
Proposed Tech Specs Improving Licensing & Design Basis for Isolation of Feedwater Penetrations
ML20195H5381998-11-18018 November 1998
Rev 4 to Pump & Valve Inservice Testing Program Plan
ML20155D9431998-10-27027 October 1998
Proposed Tech Specs 2.1.1.2,applying Addl Conservatism by Modifying MCPR Safety Limit Values,As Calculated by GE
ML20155D8241998-10-27027 October 1998
Proposed Tech Specs Adding Two Paragraphs to TS 5.2.2.e, Organization - Unit Staff
ML20196H5131998-10-0808 October 1998
Rev 4,Vol 1 to Inservice Exam Program for Perry Nuclear Power Plant
ML20151V4831998-09-0909 September 1998
Proposed Tech Specs Stipulating That Water Leakage from Feedwater motor-operated CIVs Will Be Added Into Primary Coolant Sources Outside of Containment Program & Check Valves Do Not Need to Be Included in Hydrostatic Program
ML20151V1111998-09-0303 September 1998
Proposed Tech Specs Permitting EDG TS Action Completion Time of Up to 14 Days for Div 1 or 2 EDG & Allowing Performance of EDG 24-hour TS SR Test in Modes 1 & 2
ML20151V6861998-09-0303 September 1998
Proposed Tech Specs Increasing Present Div 3 DG Fuel Oil Level Requirements to Account for Rounding Error in Calculation & Unusable Volume Due to Vortex Formation at Eductor Nozzles Located in Fuel Oil Storage Tank
PY-CEI-NRR-2395, Rev 5 to Perry NPP Odcm. with1998-09-0202 September 1998
Rev 5 to Perry NPP Odcm. with
ML20151S9561998-08-31031 August 1998
Proposed Tech Specs,Allowing Blind Flange in Inclined Fuel Transfer Sys (Ifts) Containment Penetration to Be Removed While Primary Containment Is Required to Be Operable
ML20236T7911998-07-22022 July 1998
Proposed Tech Specs Revising MSL Leakage Requirements & Eliminating Msli Valve Leakage Control Sys
ML20151P1921998-07-13013 July 1998
Proposed Tech Specs,Increasing Present +/- 1% Tolerance on Safety Mode Lift Setpoint for SRVs to +/- 3%
ML20236H8411998-06-30030 June 1998
Proposed Tech Specs,Increasing Boron Concentration in Standby Liquid Control Sys for Pnpp Cycle 8 Fuel Design & Providing Margin for Future Cycles as Required
ML20236T8451998-06-24024 June 1998
Rev 3,Change 3 to Vol 1 of Inservice Examination Program, for Pnpp
ML20216H9361998-04-14014 April 1998
Rev 1 to Proposed TS Bases,Reflecting Changes Made Since Original Implementation of TS in Improved Format in June 1996
ML20203G4781998-02-23023 February 1998
Maint Progress Review for Perry Nuclear Power Plant
ML20197F7871997-12-23023 December 1997
Proposed Tech Specs,Revising 3.8.1 Re AC Sources to Be Consistent W/Recommendations in GL 94-01, Removal of Accelerated Testing & Special Reporting Requirements for Edgs
ML20217K6501997-10-22022 October 1997
Proposed Tech Specs Incorporating Temp Control Valves & Associated Bypass Lines Around Emergency Closed Cooling Sys Heat Exchanger
ML20217F5911997-10-0202 October 1997
Proposed Tech Specs,Adding Note to TS 2.1.1.2 Re MCPR SL Values & Adding Footnote to TS 5.6.5.b to Reference NRC SER That Approved MCPR SL Values for Cycle 7
ML20210T9631997-09-0808 September 1997
Proposed Tech Specs 5.2.2.e,removing Reference to NRC Policy Statement on Working Hours.Rev Allows Changes to Specific Overtime Limits & Working Hours to Be Evaluated IAW 10CFR50.59, Changes,Tests & Experiments
ML20210U8701997-09-0808 September 1997
Rev 3,change 2 to Vol 1 of Inservice Exam Program, for Pnpp
ML20217Q4591997-08-28028 August 1997
Proposed Tech Specs 3.4.11,revising Pressure-Temp Limits,Per Reactor Vessel Matl Surveillance Program Requirements Contained in App H of 10CFR50.90
ML20148A6871997-05-0202 May 1997
Proposed Tech Specs Re Surveillance Requirement for MSIV Leakage Rate Acceptance Criteria
ML20148A6591997-05-0202 May 1997
Proposed Tech Specs,Revising Existing Exception to LCO 3.0.4 as Applies to LCO 3.6.1.9 for MSIV Leakage Control Sys
ML20137S7761997-04-0909 April 1997
Proposed TS Requirements 3.9.1.1 & 3.9.2.2 Re Frequency on Refueling Equipment & one-rod-out Interlocks
ML20134D8251997-01-31031 January 1997
Proposed Tech Specs 1.1 Re definitions,3.6.1.1 Re Primary Containment - operating,3.6.1.2 Re Primary Containment Air locks,3.6.1.3 Re PCIVs,3.6.5.1 Re Drywell & 5.5 Re Programs & Manuals
ML20147B8271997-01-24024 January 1997
Rev 3 to Vol 1 of Inservice Exam Program
ML20134D8751996-10-24024 October 1996
Proposed Tech Specs 2.1.1.2,safety Limits Applying Conservatism by Increasing MCPR Safety Limit Values
ML20117E7891996-08-27027 August 1996
Proposed Tech Specs,Revising Mls Leakage Requirements & Eliminating MSIV Control Sys
ML20108A2581996-04-26026 April 1996
Proposed Improved Tech Specs
ML20100N9501996-03-0101 March 1996
Proposed TS Pages Re Drywell Leak Rate Testing Requirements
ML20100L3331996-02-27027 February 1996
Proposed Tech Specs Re Drywell Personnel Air Lock Shield Door Analyses
ML20100J5971996-02-24024 February 1996
Proposed Tech Specs,Revising Definition of Core Alteration
ML20149K2221996-02-17017 February 1996
Proposed Tech Specs,Reflecting Mod of Leakage Rate Requirements for Main Steam Lines Until End of Operating Cycle 6
ML20100G0161996-02-0101 February 1996
Draft Rev 0 to Pnpp NUMARC/NESP-007 Plant-Specific EAL Guidelines
ML20096D4651996-01-16016 January 1996
Proposed TS Requirements for Drywell Leak Rate Testing
ML20096C0591996-01-10010 January 1996
Proposed Tech Specs,Requesting one-time Surveillance Interval Extension to Support Current Schedule for Refueling Outage 5,scheduled to Begin 960127
ML20095H4721995-12-20020 December 1995
Proposed Tech Specs Re Replacement of Selected Analog Leak Detection Sys Instruments W/Ge Numac Leak Detection Monitor
ML20108B2851995-11-22022 November 1995
Rev 5 to Offsite Dose Calculation Manual
ML20094F2051995-11-0202 November 1995
Proposed Tech Specs for Handling Irradiated Fuel in Containment or Fuel Handling Bldg & Performing Core Alterations
ML20094E6751995-11-0202 November 1995
Proposed Tech Spec,Requesting Rev to TS for Onsite Power Distribution Sys:Ts 3/4.8.3.1, Distribution - Operation
1999-09-09
[Table view]
Category:TEST/INSPECTION/OPERATING PROCEDURES
MONTHYEARML20205C6351999-03-16016 March 1999
Preliminary Rev 0 to Wps 01-43-T-801, Preliminary Weld Procedure for Perry Nuclear Power Plant Feedwater Nozzle Repair
ML20195H5381998-11-18018 November 1998
Rev 4 to Pump & Valve Inservice Testing Program Plan
ML20196H5131998-10-0808 October 1998
Rev 4,Vol 1 to Inservice Exam Program for Perry Nuclear Power Plant
PY-CEI-NRR-2395, Rev 5 to Perry NPP Odcm. with1998-09-0202 September 1998
Rev 5 to Perry NPP Odcm. with
ML20236T8451998-06-24024 June 1998
Rev 3,Change 3 to Vol 1 of Inservice Examination Program, for Pnpp
ML20203G4781998-02-23023 February 1998
Maint Progress Review for Perry Nuclear Power Plant
ML20210U8701997-09-0808 September 1997
Rev 3,change 2 to Vol 1 of Inservice Exam Program, for Pnpp
ML20147B8271997-01-24024 January 1997
Rev 3 to Vol 1 of Inservice Exam Program
ML20100G0161996-02-0101 February 1996
Draft Rev 0 to Pnpp NUMARC/NESP-007 Plant-Specific EAL Guidelines
ML20108B2851995-11-22022 November 1995
Rev 5 to Offsite Dose Calculation Manual
ML20087D7971995-07-0707 July 1995
Vol 1 to Rev 3, Perry Nuclear Power Plant Inservice Exam Program
ML20082C2751995-03-29029 March 1995
Rev 5 to Odcm
ML20082C2771995-03-29029 March 1995
Rev 6 to Process Control Program
ML20108B2821995-03-29029 March 1995
Rev 6 to Process Control Program
ML20085A0501995-02-0707 February 1995
Rev 2 to ISI Exam Program
ML20083A8611994-10-20020 October 1994
Rev 2 to Plant Administrative Procedure PAP-0806, Oil/ Chemical Release Contingency Plan
ML20101B7951994-10-14014 October 1994
Partially Withheld Rev 19 to Security Plan
PY-CEI-NRR-1827, Revised Emergency Public Info Organization Implementing Instruction Manual Including,Temporary Change Number,(Tcn) TCN-1 to Rev 10 to Instruction 1,TCN-2 to Rev 20 to App B & TCN-4 to Rev 0 to App I-B1994-07-18018 July 1994
Revised Emergency Public Info Organization Implementing Instruction Manual Including,Temporary Change Number,(Tcn) TCN-1 to Rev 10 to Instruction 1,TCN-2 to Rev 20 to App B & TCN-4 to Rev 0 to App I-B
ML20065E9341994-04-0505 April 1994
Rev 3 to Pump & Valve IST Program Plan
ML20101B7841994-04-0101 April 1994
Partially Withheld Rev 18 to Security Plan
ML20063K7171994-01-17017 January 1994
Rev 2,Temporary Change 1 to Vol 1 of Inservice Exam Program
PY-CEI-NRR-1736, Temporary Change 1 to Rev 0 to App H of Emergency Public Info Organization Instructions Manual1993-12-20020 December 1993
Temporary Change 1 to Rev 0 to App H of Emergency Public Info Organization Instructions Manual
ML20063L1501993-12-16016 December 1993
Rev 1,to Industrial Radiography Program
PY-CEI-NRR-1715, Temporary Change 3 to Rev 1 to Emergency Public Info Organization Instructions Manual1993-10-26026 October 1993
Temporary Change 3 to Rev 1 to Emergency Public Info Organization Instructions Manual
ML20058N3951993-10-11011 October 1993
Inservice Examination Program, Rev 2
ML20045J2511993-07-15015 July 1993
Revised Emergency Public Info Organization Implementing Instruction Manual,Including Temporary Change (TC) 2 to Rev 1 of App D,Tc 2 to Rev 0 of App I,Part A,Pages 1-2 & 3-4 & TC 3 to Rev 0 of App I,Part B,Page 19-20.W/930715 Ltr
ML20045D4011993-06-16016 June 1993
Revised Emergency Public Info Organization Implementing Instruction Manual,Including Temporary Change Number (Tcn) TCN-1 to Rev 8 to Section II,TCN-1 to Rev 1 to Section IV & TCN-1 to Rev 8 Instruction 5.W/930616 Ltr
ML20138D1831993-01-14014 January 1993
Rev 2 to Perry Operations Manual,Inservice Exam Program
ML20101B7811992-11-20020 November 1992
Partially Withheld Rev 17 to Security Plan
ML20118A8331992-09-22022 September 1992
Revised Emergency Public Info Organization Implementing Instructions Manual,Including Rev 17 to JPC-App-B,Rev 9 to JPC-Instruction 1,TC-1 to JPC-Instruction 2 & Rev 8 to JPC-Instruction 3
ML20045B3441992-07-31031 July 1992
Temporary Change 1 to Rev 1 to Perry Operation Manual OM1A:PAP-0806, Oil/Chemical Release Contingency Plan.
ML20101B7871992-04-27027 April 1992
Partially Withheld Rev 17 to Security Plan
PY-CEI-NRR-1445, Rev 15 to Emergency Public Info Organization Instructions Manual App B, Personnel/Access List1992-02-12012 February 1992
Rev 15 to Emergency Public Info Organization Instructions Manual App B, Personnel/Access List
ML20044G8151992-01-10010 January 1992
Rev 1 to Perry Operations Manual OM1A:PAP-0806, Oil/ Chemical Release Contingency Plan.
ML20091K4861992-01-0303 January 1992
Rev 1 to Inservice Exam Program
ML20082P8911991-09-0404 September 1991
Rev 0 to Temporary Instruction TXI-0122, Zebra Mussel Treatment
PY-CEI-NRR-1366, Apps B & D to Emergency Public Info Organization Instructions Manual1991-06-14014 June 1991
Apps B & D to Emergency Public Info Organization Instructions Manual
ML20029B1571991-02-27027 February 1991
Revised Emergency Public Info Organization Instructions Manual. W/910227 Ltr
ML20077J9691990-12-31031 December 1990
Rev 3 to Pump & Valve Inservice Testing Program Plan
ML20028H7581990-12-26026 December 1990
Emergency Public Info Organization Instructions Manual,App B, Personnel/Access Lists. W/910124 Ltr
ML20058E8131990-10-17017 October 1990
Instruction II to Rev 8 to Emergency Public Info Organization Instructions Manual, Purpose,Scope,Company Policy,Responsibilities & Refs
ML20058E8041990-10-17017 October 1990
Instruction I to Rev 8 to Emergency Public Info Organization Instructions Manual, Manual Distribution
PY-CEI-NRR-1223, Rev 11 to Emergency Public Info Organization Implementing Instruction Manual,App B, Personnel/Access Lists1990-09-10010 September 1990
Rev 11 to Emergency Public Info Organization Implementing Instruction Manual,App B, Personnel/Access Lists
ML20058L1721990-05-30030 May 1990
Rev 0 to Inservice Exam Program
ML20043A6501990-05-14014 May 1990
Revised Emergency Public Info Organization Implementing Instructions Manual. W/900514 Ltr
ML20248H2481989-10-0202 October 1989
Rev 2 to Pump & Valve Inservice Testing Program Plan
ML20246K8101989-08-14014 August 1989
Temporary Change Notice 6 to Rev 3 to OM12D:ODCM, Odcm
ML20246K8021989-02-25025 February 1989
Temporary Change Notice 5 to Rev 3 to OM12D:ODCM, Odcm
ML20101B7911989-01-16016 January 1989
Partially Withheld Rev 12 to Security Plan
ML20236V4831987-11-23023 November 1987
MSIV EQ Validation Task 3,Solenoid Valve Environ (Thermal Endurance) Test Plan for Perry Nuclear Power Plant
1999-03-16
[Table view] |
Text
.
Att: chm:nt 2 PY-CEl/NRR-2380L Page 1 of 9 4 I PRELIMINARY WELD PROCEDURE FOR PERRY NUCLEAR POWER PLANT FEEDWATER NOZZLE REPAIR
$410$$k NoSfjo i
sS Oi43-T40i Rev. 0 PRELIMINARY WPS Ariechrranta PY-CEl/NRR-2380L Page 2 of g Company Name: Welding Services,Inc. By: QA' Welding Procedure Specification No. Preliminary WPS 01-43-T-801 Date: 03/16/1999 Revision No. O Date 03/16/1999 Supporting PQR No.(s) None (This is the Preliminary WPS for qualification of POR 01-43-T-801).
Welding Pfocess(es) GTAW Type (s) Machine -
% % % s.m aASE RAETALS (QW403)
P-No. 1 Group No. 2 to P-No. 43 Group No. NA OR SpeclAcahon type and grade to Specincetion type and grade OR Chem. Analysis and Mech. Prop.
to Chem. Analysis and Mech. Prop.
Base Metal: Thickness Range: Groove 1.5" Fillet NA Pipe Dia. Range: Groove Plate Fillet NA Other None JOINTS (QW-402) PREHEAT (*F)(QW406)
Joint Design. Full-pen. temperbead groove. Preheat Temp. Min. 50*F Min.,60*F Max.
Backing (other than gas baciong) required? E Yes O No I y nterpassTemp. Max. 150*F and 350*F (See Preheat Notes)
Backing Material (Type) Carbon Steel Plate Proheat Maintenance: O No O Yes Retainers S Not Permitted O Permitted Proheat Notes: 150*F interpass temperature shaR apply for temperbead Other: Water backing win be used behind the weld groove. layers i through 3. 350*F shan apply for weld remainder.
POSITIONS (QW406) POSTWELD HEAT TREATMENT (QW-407)
Position (s) of broove 3G (Vertical) Tempers'ure Range None Wolding Progression: E Up O Down O Orbital Time Range NA Position (s)of Fillet: NA PWHT Notes: PWHT shall not be performed.
ELECTfDCAL CHARACTERISTICS (QW409) GAS (QW-408)
Current O AC S DC Polanty S Straight O Reverse Percent Composition Amps (Range) . See pg. 2 Volts (Range) See pg. 2 Gas (es) Mixture Rate (CFH)
Tungsten Type EWTh-2 Size 3/32",1/8*, or 5/32' Shielding Argon NA 1545 GMAWXfor Mode NA Trailing None NA NA Maximum Heatinput . See attached instructKms @ Backing None NA NA FILLER IIETALS (QW-404)
Spec. No (SFA) None G AWS Class ERNrCrFe-7 Solid Bare Wke @
F-No. F-43 A-No. NA Filler Size 0.035' l Wold Metal MCx. Deposit Thick. 1.5" FiNot Thk Range NA Flux Class None i Flux Trade Name NA I Consum. Insert O Permitted O Not Permetted S NA O Permetted O hot Permitted O NA O Permitted O Not Permrtted O NA insert Malerials None FinerWwe Feed E Cold Wire O Hot Wire TECHNIQUE (QW-410) l String orWeave Bead S String OWeave O Both OOther (explain):
OrtAce or Gas Cup Size #4 through #13.
Initti and lmerpass Cleaning S Mechanical O Thermal O Chemical O Other(explain)
Method of Back Gouging O Mechanical O Thermal B None Oscinsbon (Machine / Auto Only) Not Permitted Contact Tube to Work Distance NA Multiple or Single Pass (per side) O Single S Muitpie Multiple or Single Electrodes S Single O Multiple Travel Speed (Range) - See attached Technique Data Sheets.
Peening S Prohibited O Permitted (explain)
Welding without filler material S Prohibited O Permitted (explain)
Supplementalfiller material S Prohibited O Permitted (explain)
Qualified for impact Test Apps: 0 Yes O No Pass exceeding 1/2" permitted O Yes S No j
1 Page 3 of g WPS 01-43-T401 RTv. O Joint Details (QW-402)
- i x; '
P1 Group 2 P43 Water Backing Top View This Preliminary WPS serves to qualify POR 01-43-T-801 for ambient temperature temperbead welding on water-backed P-1 base materials.
A temperbead methodology (similar to that described in Draft ASME Code Case N-612) will be used to deposit three weld layers on the P-1 Group 2 base rnaterial groove face prior to installation of the remainder of the weld.
Water backing will be applied to simulate welding on water-filled pipe, and water will be circulate to simulate an infinite heat sink.
Water will not be introduced into the weld joint (i.e., the weld area will remain dry throughout weld installation).
PWHT will not be performed. The temperbead approach is not mandated by ASME Code requirements, but is being used to minimize adverse effects of witer backing on base metal impact properties. When the resulting POR is complete, it will be used to weld on water backed, impact-tested piping without PWHT and without elevated preheat. 1 Filler Metal Current Weld Type / Amperage Volt Travel Speed Lcyer(s) Process Class Diameter Polarity Range Range Range Other All O GTAW ERNiCrFe-7 0.035" @ DCEP @ @ 3.5 - 8.0 IPM @ NA G
I I
NOTES
@ Stepty-step instructions goveming weld installation are documented on the following pages of this Preliminary WPS. Compliance with these instructions is mandatory.
G ERNiCrFe-7 electrode (UNS N00052)is classified as F-43 in accordance with ASME Code Case 2142.
G Heat input controlis mandatory. Heat input rate is determined by the emperage, voltage, and travel speed used to install each weld pass, and is measured in Joules per inch. Three temperbead layers shall initia!!y be installed, as specified in the attached instructions. After these three temperbead layers are completed, the remainder of the weld shall be installed. Installation shall comply with the attached instructions, and the parameters used to install each portion of the weld shall be recorded on the attached technique sheets.
@ This preliminary WPS is issued based on the requirements of ASME Section XI,1992 Edition. Use of thrs WPS in applications govemed by other Code Editions / Addenda is permitted, provided a review demonstrates compliance with all applicable requirements of these other editions / addenda.
P:ge 4 of g eso m omyo Instructions for WPS-01-43-T-801 Temper Bead Repair of P-1 Group 2 Base Materials welded to P-43 Base Material using ERNiCrFe-7 Solid Bare Wire The followini; instruct' ions shall be followed for the welding of PQR 01-43-T 801. These instructions are to be used in addition to those contained on pages I and 2 of this WPS.
- 1. All welding shall comply with ASME Section IX and XI. All essentist and supplementary essential variables shall be recorded.
- 2. All welding filler materials shall be controlled in accordance with a program that assures they are identified as acceptable untit consumed.
- 3. Prior to weld installation, water backing shall be established as follows:
A. Attach the carbon steel backing strap to the back of both coupons using seal welds. ERNiCrFe-7 tiller material, and the manual GTAW process shall be used. Minimize seat weld size (these welds serve only to keep water from entering the weld area during PQR welding).
B. Construct a metal container, and attach this container to the edges of the procedure qualification test coupon. Either mechanical or welded attachment methods may be used. If welding is used, use ERNicrFe-7 for all welds that attach the container to the procedure qualification coupons. The container may be constructed of Carbon Ster.1 or other suitable material.
C. Fill the container with water. Establish a water flow through the container prior to installation of the first temperbead weld layer. Tap water may be used, provided it is within a temperature range of 50 F to 65'F. Maintain adequate water flow throughout weld installation, to simulate the efTects of an infinite heat sink.
- 4. The weld installation sequence shall be as follows:
A. The P1 Group 2 base material and the adjacent backing strap shall be buttered with a single-layer GTAW deposit. Welding parameters for this layer shall be recorded on the attached Technique Data Sheet for Layer 1. The final appearance of the first l weld layer shall be as shown in the following sketch. l I
P1 Group 2 P43 l
Water Backing Top View !
Layeri B. A second weld layer shall be installed, completely covering the first weld layer. Welding parameters for this layer shMI be recorded on the attached Technique Data Sheet for Layer 2. The final appearance of the second weld layer is shown in the following sketch. The outermost bead on this second layer shall be no closer than 1/8", and no further than 1/4" from the l point where the edge of the first layer contacts the P1 base material. l l
P1 Group 2 P43 Water Backing.
Top View Layer 2
Pege h of 9 WPS 01-43-T-801 Rev. O C. A third weld layer shall be installed, completely covering the second wcld layer. Welding parameters for this layer shall be recorded on the attached Technique Data Sheet for Layer 3. The final appearance of the third weld layer is shown in the following sketch. The outermost bead on this third layer shall nc,t extend past the point where the edge of the second layer contacts the first weld layer near the face of the P1 base material.
P1 Group 2 P43 l
}
Water Backing Top View Layer 3 D. The remainder of the weld shall be installed. Beads may be deposited in any sequence, e.g., completion ofindividual weld layers that span the entire weld groove is not require;i Welding parameters for this welding shall be recorded on the attached Technigre Data Sheet for ' Remaining Weld Passes'. The completed weld shaF have at least one full layer of reinforcement (weld crown) that extends above flush with adjacent base material.
P1 Group 2 P43 Water Backing Top View Remaining Layers E. Destructive testing (consisting of Charpy impact tests of the P1 Base Material and P1 HAZ, Transverse Tensile Tests (2 each) and Side Bend Tests (4 each) shall then be performed in accordance with ASME Code requiremen3.
r Page 6 of 9 WPS 01-43-T-801 Ree. O Layer 1 Technique Data Sheet (Applicable only to Layer 1)
BACKGROUND UPSLOPE TIME PRIMARY CURRENT CURRENT DOWNSLOPE TIME 1
0-30 SEC 0-300 AMPS 0-300 AMPS 0-30 SEC l
TRAVEL START DELAY TRAVEL SPEED LOW PULSE FREQ LOW PULSE WIDTH SYNC ULSE l A
0-30 SEC 0-.20.0 IPM 0-9.9 PPS 0-99 % opp SYSTEM MODE
, WIRE SPEED i OPERATE TEST START DELAY PRIMARY BACKGROUND
\
0-30 SEC 0-99 IPM 0-99 IPM OFF 3 5 FWD REV MAN OSCILLATOR OUT EXCURSION IN AMPLITUDE DWELL TIME DWELL FIXTUR MODE PREPURGE
.0 0 NA NA NA SAMPLED 0790 INCHES 0.1-0.9 SEC 0.1-0.9 SEC 0.1-0.9 SEC LOCK CONT. !
A l PRIMARY BACKGROUND
RESPONSE
NA 5.0-25.0 VOLTS 5.0-25.0 VOLTG' ,
l l
NOTES:
Record applicable parameters used to installlayer 1.
Welding of the first layer shall comply with all other requirements of this Preliminary WPS.
l l
l I
r Page 7 of 9 WPS 0143-T-801 Rev. O Layer 2 i , ,
Technique Data Sheet (Applicable only to Layer 2) l BACKGROUND '
UPSLOPE TIME PRIMARY CURRENT CURRENT DOWNSLOPE TIME i 0-30 SEC 0-300 AMPS 0-300 AMPS 0-30 SEC I
TRAVEL START DELAY TRAVEL SPEED LOW PULSE FREQ LOW PULSE WIDTH L'NC ULSE 1
A 0-30 SEC 0-20.0 IPM 0-9.9 PPS 0-99 % opp SYSTEM MODE
, WIRE SPEED i OPERATE TEST START DELAY PRIMARY BACKGROUND
\
0-30 SEC 0-99 IPM 0-99 IPM OFF 3 5 FWD REV MAN OSCILLATOR OUT EXCURSION IN AMPLITUDE DWELL TIME DWELL FIXTU MODE PREPURGE
.0 0 NA NA NA SAMPLED 0.99 INCHES 0.1-0.9 SEC 0.1-0.9 SEC 0.1-0.9 SEC LOCK CONT.
A l PRIMARY BACKGROUND
RESPONSE
NA 5.0-25.0 VOLTS 5.0-25.0 VOLTS 1
l NOTES:
Record applicable parameters used to install layer 2.
Welding of the second layer shall comply with all other requirements of this Preliminary WPS.
e s Page 8 of 9 WPS 01-43-T-801 R:v. O Layer 3 Technique Data Sheet (Applicable only to Layer 3)
BACKGROUND UPSLOPE TIME PRIMARY CURRENT CURRENT DOWNSLOPE TIME 4 0-30 SEC 0-300 AMPS 0-300 AMPS 0-30 SEC I TRAVEL START DELAY TRAVEL SPEED LOW PULSE FREQ LOW PULSE WIDTH SYNC ULSE A
0-30 SEC 0-20.0 IPM 0-9.9 PPS 0-99 % opp SYSTEM MODE i WIRE SPEED i OPERATE TEST START DELAY PRIMARY BACKGROUND l
l l
0-30 SEC 0-99 IPM 0-99 IPM OFF 3 5 FWD REV MAN OSCILLATOR OUT EXCURSION IN AMPLITUDE DWELL TIME DWELL
\
FIXTUR MODE PREPURGE
.0 0 NA NA NA E SAMPLED 0.99 INCHES 0.1-0_9 SEC 0.1-0.9 SEC 0.1-0.9 SEC LOCK CONT.
A ,
1 PRIMARY BACKGROUND
RESPONSE
NA 5.0-25.0 VOLTS 5.0-25.0 VOLTS NOTES:
Record applicable parameters used to install layer 3.
Wziding of the third layer shall comply with all other requirements of this Preliminary WPS.
I
Page 9 of 9 WPS 01-43 T-801 R;v. O Remaining WeldPasses
, , Technique Data Sheet (Applicable only after completion of Layers 1 through 3) !
BACKGROUND l
, UPSLOPE TIME PRIMF.Y CURRENT CURRENT DOWNSLOPE TIME 0-30 SEC 0-300 AMPS 0-300 AMPS 0-30 SEC l
TRAVEL START DELAY TRAVEL SPEED LOW PULSE FREQ LOW PULSE WIDTH SYNC ULSE A
0-30 SEC 0-20.0 IPM 0-9.9 PPS 0-99% opp SYSTEM MODE
, WIRE SPEED , OPERATE TEST START DELAY PRIMARY BACKGROUND
\
l 0-30 SEC 0-99 IPM 0-99 IPM OFF 3 5 FWD REV MAN OSCILLATOR 'UT EXCURSION IN AMPLITUDE ih/ ELL TIME DWELL FIXIUR MODE PREPURGE
.0 0 NA NA NA SAMPLED 0.99 INCHES 0.1-0.9 SEC 0.1-0.9 SEC 0.1-0.9 SEC LOCK CONT.
A PRIMARY BACKGROUND
RESPONSE
NA 5.0-25.0 VOLTS 5.0-25.0 VOLTS NOTES:
Record applicable parameters used to install remaining weld passes.
Welding of all remaining weld passes shall c^raply with all other requirements of this WPS.