ML20203N142
| ML20203N142 | |
| Person / Time | |
|---|---|
| Site: | River Bend  |
| Issue date: | 09/17/1986 |
| From: | GULF STATES UTILITIES CO. |
| To: | |
| Shared Package | |
| ML20203N130 | List: |
| References | |
| NUDOCS 8609230163 | |
| Download: ML20203N142 (3) | |
Text
_
e4 - 4 me.
E tm V
a m--
-4J+-
a
.A k.
s ENCLOSURE 2 PROPOSED REVISED RIVER BEND TECHNICAL SPECIFICATIONS d
i 4
i 4
r i
i i
i l
1 1
4 i
l 1
i g
l l
TABLE 3.6.4-1 (Continued) 2.
CONTAINMENT AND DRYWELL ISOLATION VALVES g
g.
MAXIMUM SECONDARY PENETRATION VALVE ())
ISOLATION TIME CONTAINMENT GROUP (Seconds)
BYPASS PATH SYSTEM VALVE NUMBER NUMBER e$
(Yes/No)
-n a.
Automatic Isolation Valves 1.
Primary Containment (a) (Continued) 1KJB*Z15 2
1E51*MOVF063 g
1E51*MOVF076 1KJB*Z15 2
1E51*MOVF064(3) 1KJB*Z15 2
9.9 No RCIC Pump Suc.-Supp. Pool 1E51*MOVF031 1KJB*Z16 2
30.5 No RCIC Turbine Exh.-Supp. Pool 1E51*MOVF077 1KJB*Z17 3
14.2 No m}
RCIC Turbine Exh. Vac. Bkrs.
IE51*MOVF078 1KJB*Z18B,C 3
16.5 No Cont./Drywell. Purge Sup.
1HVR*A0V165 IKJB*Z31 8
3 No J,
Cont./Drywell Purge Sup.
1HVR*A0V123 1KJB*231 8
3 No Cont./Drywell Purge Outlet 1HVR*A0V128 1KJB*Z33 8
3 No u'
i Cont./Drywell Purge Outlet 1HVR*A0V166 1KJB*Z33 8
3 No Post-Accident Samp. Sup.
ISSR*S0V130 1KJB*Z6018 10 3
No Post-Accident Samp. Sup.
ISSR*SOV131 1KJB*Z601B 10 3
No
/
TABLE 3.6.4-1 (Continued)
CONTAINMENT AND DRWELL ISOLATION VALVES
!B cm NOTES
[
(a) Subject to a Type C leak rate test at a test pressure of 7.6 psig except as otherwise noted.
(b) Also isolates the drywell.
~
(c) Testable check valve.
(d) Isolates on MS-PLCS air line high flow or MS-PLCS air line header to Main Steam Line low differential pressure.
(*) Receives a remote manual isolation signal.
II) This line is sealed by the penetration valve leakage control system (PVLCS).
The combined leakage from
{
valves sealed by the PVLCS is not included in 0.60 La Type B and C test total.
i (9) This valve sealed by the main steam positive leakage control system (MS-PLCS).
Valves sealed by the O
MS-PLCS are tested in accordance with Surveillance Requirement 4.6.1.3.f to verify that leakage does not exceed the limit specified in Specification 3.6.1.3.c.
This leakage is not included in the 0.'60 La Type B and C test total.
(h) Not subject to Type C leakage tests.
Valve (s) will be included in the Type A test.
(I) Valve is hydrostatically leak tested at a test pressure of 8.36 psig (1.1 Pa).
The leakage from hydrostatically tested valves is not included in the 0.60 La Type B and C test total.
( ) Not subject to a Type A, B, or C leak rate test.
(I) Valve groups listed are designated in Table 3.3.2-1.
(no lve IE51* MBVF076 is nel requded de be OPEEABLE lhromb Oc4ebge 4,11%.
-