ML20183A326
| ML20183A326 | |
| Person / Time | |
|---|---|
| Issue date: | 08/27/2020 |
| From: | Office of Nuclear Material Safety and Safeguards |
| To: | |
| Beardsley M | |
| Shared Package | |
| ML20183A179 | List:
|
| References | |
| SA-200 | |
| Download: ML20183A326 (10) | |
Text
Office of Nuclear Material Safety and Safeguards Procedure Approval Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements, Interim State Agreement (SA) Procedure SA-200 Issue Date:
Review Date:
Michael C. Layton Director, NMSS/MSST Date:
Paul Michalak Lizette Roldan-Otero, Ph.D.
Acting Chief, NMSS/MSST/SALPBSALB Date:
Michelle Beardsley Procedure Contact, NMSS/MSST/SALPBSALB Date:
ML19311C784 ML20183A325 NOTE Any changes to the procedure will be the responsibility of the NMSS Procedure Contact.
Copies of the NMSS procedures are available through the NRC websiteWeb site at https://scp.nrc.gov.
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 2 of 9 Issue Date:
I.
INTRODUCTION This procedure establishes the compatibility, and health and safety (H&S) components assigned to the U.S. Nuclear Regulatory Commission (NRC) regulations and program elements as determined in accordance with Management Directive (MD) and Handbook 5.9, Adequacy and Compatibility of Program Elements for Agreement State Programs.
II.
OBJECTIVE To provide guidance to the NRC staff, Agreement States, and States pursuing Agreement State status, and the NRC staff on the adequacy, compatibility and health and safety components assigned to NRC regulations and other program elements.
III.
BACKGROUND A. On October 18, 2017, the NRC published a merged revision to the two 1997 Policy Statements (i.e., Policy Statement on the Adequacy and Compatibility of Agreement State Program and the Statement of Principles and Policy for the Agreement State Program). The resulting Agreement State Program Policy Statement set forth the approach that the Commission will use when determining which of its regulations and program elements should be adopted by an Agreement State to maintain an adequate and compatible program. The Agreement State Program Policy Statement also specifies that an Agreement State should have legally binding requirements to maintain adequate protection of public health and safety. The Policy Statement defines program element as any component or function of a radiation control regulatory program, including regulations or other legally binding requirements imposed on regulated persons, which contributes to implementation of that program. It identifies those NRC program elements required for adequacy and having a particular health and safetyH&S component as those that are designated as Categoriescompatibility categories A, B, C, D, NRC, and H&S: and those required for compatibility include those regulations and other legally binding requirements designated as Compatibility Categoriescompatibility categories A, B, C, and DC (see Section V.B.1.d of this procedure for definitions of these compatibility categories).
B. MD 5.9 describes the criteria and process the NRC staff should follow to determine which NRC regulations and other program elements should be adopted by an Agreement State for purposes of adequacy and compatibility. In accordance with MD 5.9, each regulation and program element isare analyzed and classified with a specific compatibility category designation or health and safetyH&S component.
C. Office of Nuclear Material Safety and Safeguards (NMSS) State Agreements (SA)
Procedure SA-200This procedure was developed for use by Agreement State and NRC staff. It identitiesidentifies the assigned compatibility category or health and safetyH&S component for each rule and program element, as determined in accordance with MD 5.9. The terms rules and regulations are used
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 3 of 9 Issue Date:
interchangeably in this procedure. The component classifications are set out in individual tables as described further belowin Section V.A. of this procedure.
IV.
ROLES AND RESPONSIBILITIES A. The Director, Division of Material Safety, Security, State, and Tribal Programs (MSST), is responsible for carrying out the responsibilities outlined inthe implementation of MD 5.9.
B. The Branch Chief, for the State Agreement and Liaison Programs Branch, Division of Materials Safety, Security, State, and Tribal Programs (MSST), is responsible for assigning a staff member to serve as the State Regulation Review Coordinator (SRRC), assisting in procedure updates, and determination ofdetermining rule and program element compatibility designations in accordance with MD 5.9.
C. The SRRC is responsible for the review, evaluation, and resolution of adequacy and compatibility concerns that are identified during the review of Agreement State legislation, regulations, and other program elements, in collaboration and coordination with the Agreement State and NRC personnelstaff.
D. The Standing Committee on Compatibility is responsible for:
- 1. The independent review of regulations and other program elements (e.g.,
inspection procedures, licensing guidance, pre-licensing guidance checklist, etc.) required for Agreement State adequacy and compatibility with NRC requirements.
- 2. Ensuring consistency during the rulemaking process by documenting the basis for decisions made regarding compatibility determinations while taking into consideration (a) program element implementation issues, (b) the NRC staffs review of State regulations, and (c) other program elements under the Integrated Materials Performance Evaluation Program (IMPEP).
- 3. Evaluating and documenting compatibility designations as described in MD 5.9.
V.
GUIDANCE The NRC staff should follow the guidance presented in MDthe Handbook of MD 5.9, which describes the criteria and the process that will be used to determine the adequacy and compatibility category designations and health and safetyH&S components of NRC regulations and program elements that an Agreement State should adopt for an adequate and compatible program.
A. Title 10 Code of Federal Regulations (CFR)
A current section-by-section summary of the compatibility and health and safetyH&S categories of regulations in Title 10 of the CFR can be found on the
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 4 of 9 Issue Date:
NMSS websites Regulation Toolbox of the state communications portal Web site at: https://scp.nrc.gov/regsumsheets_newregs.html.1 The NRC staff should follow the guidance that an Agreement State need not adopt a specific regulation if the Agreement State has no licensees that would be subject to that regulation. In such cases, the Agreement State would need to commit to adopting the regulation, or to impose the regulation through license conditions or other legally binding means, if an application were to be received by the Agreement State for a license authorizing materials subject to that regulation.
MDThe Handbook of MD 5.9, Appendix A contains information regarding program elements that are applicable to the regulation of agreement materials. The analysis was based onMD 5.9 provides the process and the categorization criteria and processes set out in MD 5.9. Per. In accordance with Section VI.E of MD 5.9, Part VI.E. program elements should be adopted within 6six months unless otherwise specified. The Parts of 10 CFR on the NMSS websitestate communications portal Web site for which tables are provided below have been analyzed section-by-section; those Parts that do not have a corresponding table have been determined to address areas in which Agreement States either do not have regulatory authority or that are applicable specifically to NRCs regulatory program and need not be addressed by an Agreement State. For completeness, those Parts that address areas of exclusive NRC authority are listed in Table 1.
Those Parts that generally are applicable specifically to NRCs regulatory program, but are not areas of exclusive NRC authority, are listed in Table 2. Any future changes to these determinations will be reflected in revisions to Tables 1 and 2 and to the individual section-by-section analysisprogram element and 10 CFR tables on the website or in Appendix AWeb site, as appropriate.
Table 1 Specific Parts of Title 10 of the Code of Federal Regulations That Address Areas of Exclusive NRC Authority Parts 10, 11, 25, 26, 50, 51, 52, 53, 54, 55, 1 The Statements of Consideration for NRC regulations developed prior to September 3, 1997, do not contain the compatibility designations and associated rationale for compatibility designation. For NRC rules developed after September 3, 1997, the Statements of Consideration contain a section entitled, Agreement State Compatibility, which includes information on NRC rule compatibility designation and rationale.
Formatted: Indent: Left: 0"
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 5 of 9 Issue Date:
60, 62, 72, 732, 74, 753, 76, 81, 95, 100, 1104, 140, and 160.
Table 2 Specific Parts of Title 10 of the Code of Federal Regulations That Address Areas That Generally Are Applicable Only to NRCs Regulatory Program Parts 1, 2, 4, 7, 8, 9, 12, 13, 14, 15, 16, 215, 170, and 171 B. Regulations and Program Element Review Summary Sheets (RSS)
- 1. The RSS, also known as the Regulation Amendment Tracking System (RATS) sheet, is based on the Summary of Change document which is created when the NRC revises its regulations. The Summary of Change document contains all regulation changes that were included in the rulemaking. This document is included as an enclosure to the State and Tribal Communication (STC) letter announcing the rulemaking.
The RSS or RATS sheet is also used to document the NRC staffs review of the Agreement States equivalent rule provisions; these sheets can be found on the Regulation Toolbox of the NMSS websitestate communications portal Web site at: https://scp.nrc.gov/rss_regamendents.html).. The sheet is divided into eight columns: NRC Regulation Section; Section Title; State Section; 2 Section 73.67 (Physical Protection of Special Nuclear Material of Moderate and Low Strategic Significance) of 10 CFR Part 73 is applicable to certain Agreement State licensees pursuant to 10 CFR 150.14. The Agreement States, therefore, may wish to inform their licensees of the provisions of this part through a mechanism that is appropriate under the States administrative procedure laws, but does not confergrant regulatory authority on the State in this area of exclusive NRC jurisdiction.
3 Part 75 (Safeguards on Nuclear Material - Implementation of US/IAEA Agreement) may be applicable to certain Agreement State licensees as delineated in Section 75.2 - Scope. The Agreement States, therefore, may wish to inform their licensees of the provisions of this part through a mechanism that is appropriate under the States administrative procedure laws, but does not confergrant regulatory authority on the State in this area of exclusive NRC jurisdiction.
4Section 110.54(a) (Reporting Requirements) may be applicable to certain Agreement State licensees as delineated in Section 110.1, Purpose and Scope. The Agreement States, therefore, may wish to inform their licensees of the provisions of this section through a mechanism that is appropriate under the States administrative procedure laws, but does not grant regulatory authority on the State in this area of exclusive NRC jurisdiction.
5 The provisions in Part 21 derive from statutory authority in the Energy Reorganization Act, not the Atomic Energy Act, which does not apply to Agreement States. Therefore, this Part cannot be addressed under either compatibility or adequacy. While it may be argued that there are health and safety reasons to require States to adopt the certain provisions of Part 21, States may not have the statutory authority to do so.
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 6 of 9 Issue Date:
Compatibility Category; Summary of Change to the CFR; Difference Yes/No; Significant Yes/No; and If Difference Why or Why Not was a Comment Generated.
- a. The NRC Regulation Section column contains the numbering of the regulation section as it appears in the 10 CFR.
- b. The Section Title column contains the section title as it appears in 10 CFR.
- c. The State Section will be used by NRC staff during a review of Agreement State regulations to list that States corresponding regulation section.
- d. The Compatibility Category column contains the compatibility or health and safetyH&S category for the regulation section that has been determined in accordance with the categorization criteria in MD 5.9.
Compatibility Categories & Health and SafetyH&S Identification:
A =
Basic radiation protection standard or related definitions, signs, labels or standards and scientific terms and definitions that are necessary for a common understanding of to understand radiation protection principlesconcepts. The program elements adopted by an Agreement State program element should be essentially identical to thatthose of the NRC; to provide uniformity in the regulation of agreement material on a nationwide basis.;
B =
This category pertains to aThese limited number of program elements apply to activities that cross jurisdictional boundaries, and should. These program elements have a particular impact on public health and safety and need to be addressedadopted in an essentially identical manner in order to ensure uniformity of regulation on a nationwide basis.;
C =
. TheThese program elements are important for an Agreement State program element should be essentially identical to that of NRC; have in order C =
Program element, the essential objectives of which should be adopted by the Agreement State to avoid conflicts, duplicationsconflict, duplication, gaps, or other conditions that would jeopardize an orderly pattern in the regulation of agreement material on a nationwide basis. The manner in which the essential objectives are addressed need not be the same as NRC, provided the essential objectives are met;The Agreement State program elements may be more restrictive
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 7 of 9 Issue Date:
than the NRC program elements provided that the essential objective is met, and the State requirements do not jeopardize an orderly pattern of regulation of agreement material on a nationwide basis.
D =
Not required for purposes of compatibility; NRC = These are NRC program elements that address areas of regulation that cannot be relinquished todiscontinued when a State enters into an Agreement Stateswith the NRC pursuant to the Atomic Energy Act or provisions of 10 CFR regulations.
The State should not adopt these program elements; H&S6 = Program elements identified by H&S in the Comment column are not required for purposes of compatibility; however, they do have particular health and safetyH&S significance. The Agreement Although not required for compatibility, the State shouldmust adopt the essential objectives of such program elements to maintain an adequatein this category, that embody the basic H&S aspects of the NRCs program.
elements because of particular H&S considerations
[ ] =
A bracket around a category means that the Section may have been adopted elsewhere and it is not necessary to adopt it again.
- e. The Summary of Change to the CFR Section contains the revised rule text for those sections of the 10 CFR included in the rulemaking.
- f.
The Difference Yes/No column will be used by NRC staff during a review of Agreement State regulations to indicate whether the corresponding Agreement State regulation differs from the NRCs regulation.
- g. The Significant Yes/No column will be used by NRC staff during a review of Agreement State regulations to indicate whether an identified difference found in the Agreement State regulation, is in accordance with the Compatibility Categorycompatibility category or Health and SafetyH&S designation assigned to the regulation.
6 The program elements in this category are not required for compatibility. These program elements are considered to have particular health and safety significance based on the two or fewer failures criteria.
If the essential objectives of the program element were not adopted by the Agreement State, an individual could receive an exposure in excess of the basic radiation protection standards in Compatibility Category A resulting from the higher probability of failure occurring with, at most, one other failure event.
(Management Directive 5.9., Handbook, Part II, Section F)).
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 8 of 9 Issue Date:
- h. The If Difference Why or Why Not was a Comment Generated column will state what the difference is, and whether or not that difference is in accordance with the regulations Compatibility Categorycompatibility category designation. If the difference makes the regulation non-compatible, NRC staff will also list what changes are needed to make the Agreement State regulation compatible and address health and safetyH&S issues.
- 2. Staff should be aware of the following:
- a. The following sections are found in multiple Parts of 10 CFR: Purpose, Scope, Interpretations, Communications, OMB Approval, Violations, Criminal Penalties and Inspections. These sections are all essentially identical from Part to Part. These requirements are not required for eitheradequacy, compatibility or health and safetyH&S reasons. The Agreement State may elect to adopt similar sections based on itstheir requirements;
- b. When using the Review Summary Sheets for Regulation Adoption for New Agreement State Programs (i.e., 10 CFR sheets:
https://scp.nrc.gov/regsumsheets_newregs.html), unless otherwise indicated in the tables, the compatibility category or identification of health and safetyH&S significance applies to the entire section of the Part. See, for example, the 10 CFR table for 10 CFR Part 20, Section 20.2003, where individual paragraphs are assigned different components.
4.3.
A Program Element Table indicating theand Associated Compatibility Categories for those program elements other than regulationsas Noted in SA-200 can be found on the NMSS website/Regulation Toolbox of the state communications portal Web site at https://scp.nrc.gov/regtoolbox.html. for both regulation and non-regulation program elements. The table is divided into four columns as indicated below:in alignment with the program elements outlined in the Agreement State Program Policy Statement and includes: The Program Element; Required For;, State Requirement, Adequacy/Compatibility Category;,, and CommentsReferences. Staff should use SA-107, Reviewing the Non-Common Performance Indicator, Legislation, Regulations, and Other Program Elements; SA-201, Review of State Regulatory Requirements; and MD 5.6, Integrated Materials Performance Evaluation Program along with other IMPEP guidance documents in the review of these program elements.
- a. The Program Element column describes the program element.
- b. The Required For column provides whether the program element is required for purposes of adequacy, including those that have a particular health and safety significance, compatibility, or both.
Formatted Formatted Formatted
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 9 of 9 Issue Date:
- c. The Compatibility Category column contains the compatibility category designation assigned to each program element.
- d. The Comment column contains the rationale and supporting information as to why a program element was designated as being required for compatibility, adequacy including those with a particular health and safety significance, or both.
C. Approvals
- 1. Approvals of compatibility category designations of final regulations and program elements will be done in accordance with MD 5.9 and MD 6.3, The Rulemaking Process.
- 2. Approvals of revisions to compatibility category designations of rules will be submitted to the Commission for approval. The rules developed after September 1997, are in accordance with MD 5.9, and MD 6.3, which included Commission review and approval and public notice in the Federal Register; thus, it is essential to obtain Commission approval of any revisions.
D. Compatibility Resolution MD 5.9,Section III., in MD 5.9, Organizational Responsibilities and Delegations of Authority, provides that the Office of Nuclear Material Safety and Safeguards (NMSS) will implement the program to evaluate adequacy and compatibility of Agreement State programs and in coordination with other NRC offices will review, evaluate, and determine those NRC regulations that an Agreement State should adopt as legally binding requirements for the purpose of adequacy, compatibility or health and safetyH&S. In accordance with this provision, the Compatibility Resolution (CR) process was initiated. This CR process is used to clarify or resolve minor differences that are considered acceptable between the language used in the NRCs regulation as compared to the regulation of an Agreement State.
Significant compatibility issues will require Commission approval and will be handled outside of the CR process. (Also (see Section V.C.2. of this procedure).
The NRC staff will document these clarifications in a CR document. The CR document will identify the issue, provide a discussion of the issue, and provide observations and/or conclusions of the staffs resolution of the issue. The CR document will be reviewed by the Standing Committee on Compatibility for consistency with MD 5.9 and will require concurrence by all relevant offices. The CR document will be distributed to the Agreement States and States pursuing Agreement State status, the Organization of Agreement States (OAS), the Conference of Radiation Control Program Directors, Inc. (CRCPD), and all relevant NRC staff. A list of all CR documents will be maintained on the NMSS websitestate communications portal Web site at: https://scp.nrc.gov/regtoolbox.html.
VI.
APPENDIX
Interim Procedure SA-200: Compatibility Categories and Health and Safety Identification for NRC Regulations and Other Program Elements Page: 10 of 9 Issue Date:
None.
[the former Appendix A-Program Element table can now be found in the Regulation Toolbox on the state communications portal Web site at:
https://scp.nrc.gov/regtoolbox.html].
VII.
REFERENCES Management Directives (MD) available at https://scp.nrc.gov.
NMSS SA Procedures available at https://scp.nrc.gov.
Title 10, Code of Federal Regulations available at: https://www.nrc.gov/reading-rm/doc-collections/cfr/
Program Element Table and Associated Compatibility Categories as noted in SA-200: https://scp.nrc.gov/regtoolbox.html Program Elements: Regulation and Non-Regulation:
https://scp.nrc.gov/regtoolbox.html VIII.
ADAMS Reference Documents For knowledge management purposes, listed below are all previous revisions of this procedure, as well as associated correspondence with stakeholders, that have been entered into the NRCs Agencywide Document Access Management System (ADAMS).
No.
Date Document Title/Description Accession Number 1
02/06/01 Final STP Procedure SA-200 ML010580517 2
10/25/02 STP-02-075, Opportunity to Comment on Draft Revisions to STP Procedure SA-200 ML022980631 3
10/08/04 Final STP Procedure SA-200 ML042820600 4
10/08/04 Resolution of Comments ML042820609 5
03/22/05 Final STP Procedure SA-200 ML050770486 (pkg. ML51030417) 6 06/05/09 Final FSME Procedure SA-200 ML091190055 7
11/19/19 Interim NMSS Procedure SA-200 ML19311C784 8
Comment Resolution ML20184A179 9
Final NMSS Procedure SA-200 ML20183A325 Formatted: Indent: Left: 0", First line: 0" Formatted: Font: Not Bold Formatted: Font: Not Bold Formatted: Hyperlink, Font color: Auto Formatted Table