ML20128D144

From kanterella
Jump to navigation Jump to search
Final Deficiency Rept Re Unqualified Flanged Joints for ANS Safety Classes 2 & 3 Alternately Analyzed Piping Per ASME Boiler & Pressure Vessel Code.Initially Reported on 820601. Procedure CEB-76-11 Revised
ML20128D144
Person / Time
Site: Bellefonte  
Issue date: 05/02/1985
From: Hufham J
TENNESSEE VALLEY AUTHORITY
To: Grace J
NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION II)
References
NUDOCS 8505280508
Download: ML20128D144 (2)


Text

r..

m

- a;w 3 N \\r,Q.?'

1;

. TENNESSEE VALLEY AUTHORITY.

i 1

4:

CHATTANOOGA. TENNESSEE 374ot j

.400 Che'stnut' Street Tower II

-BLRD-50-438/82-42 BLRD-50-439/82-38 x

+

'U.S.' Nuclear Regulatory Commission 7

, Region II~ _

Attn:

Dr.'J. Nelson Grace, Regional' Administrator 101 Marietta Street, NW, Suite.2900 1 Atlanta, Georgia 30323

-Dea'rl Dr. Grace:.

.BELLEFONTE NUCLEAR PLANT UNITS 1 AND 2 - EVALUATION OF FLANGE JOINTS -

A BLRD-50-438/82-42, BLRD-50-439/82,

FINAL REPORT sThe subject deficiency was initially reported to NRC-OIE Inspector

.R.~V.ECrlenjak on June 1, 1982 in accordance with 10 CFR 50.55(e) as NCR

BLN CEB 8205. This was followed by our interim reports dated July 2 and

. November 17, 1982, April'18, 1983 and April 10 and October to, 1984.

. Enclosed is our final report.-

'If you have any ' questions concerning this matter, please get in touch with R. H. Shell at FTS 858-2688.

k

si*

Very'truly yours, TENNESSEE VALLEY AUTHORITY

^

' e,

~

J. W. Hufham,. Manager Licensing and Regulations Y

Enclosure pg' i00: Mr. James Taylor,_ Director (Enclosure) l- _

0ffice of(Inspection and Enforcement' i

~U.S. Nuclear Regulatory Commission

. Washington, D.C.

20555 L

Records Center (Enclosure)

Institute of Nuclear Power Operations 1100 Circle 75 Parkway, Suite 1500 Atlanta, Georgia 30339 i

I i

5#

0 A

p R

~-

Sc..Wd..

ia So1 k An Equal Opportunity Employer i

'l

r:,

y d;

g 3,.

Su D

~

ENCLOSURE BELLEPONTE NUCLEAR PLANT UNITS 1 AND 2 EVALUATION OF FLANGE JOINTS NCR BLN CEB 8205 BLRD-50-438/82-42, BLRD-50-439/82-38 10.CFR 50.55(e)

FINAL REPORT Description ~of-Deficiency

' Flanged joints for ANS safety classes 2 and 3 alternately analyzed piping systems were not qualified in accordance with the ASME Boiler and Pressure' LVessel1 Code,Section III, paragraph'NC-3647 The alternately analyzed piping was analyzed using TVA's Office-of Engineering'(OE) Civil Engineering Branch

'(CEB)Lreport CEB-76-11, "BLN - Alternate Criteria for Piping Analysis and

. Support.".However,.this report did not delineate guidelines or methods for flange verification.. Planged joints are used in a number of. safety-related -

' systems such as the essential' raw cooling water (ERCW) system and the component cooling water (CCW) system at Bellefonte Nuclear Plant (BLN).

~

TVA has determined the cause of this deficiency to be that because of known conservatisms in CEB-76-11, flanges were originally thought to be inherently qualified for piping supported in accordance with that criteria. Therefore, flange qualification procedures were not included in CEB-76-11.

. Safety" Implications Should the flanged joints on these systems become overstressed and fail

.during'a seismic event, the ERCW and CCW systems' capabilities to adequately dissipate the long-term residual heat from the reactor core after plant shutdown could be impeded. This condition could adversely affect the safe operation of the plant.

Corrective Action TVA has revised CEB-76-11 to include criteria for qualification of. flanges.

All flanges located in alternately analyzed. piping were identified and have been evaluated for compliance to the revised criteria. As a result of this evaluation, TVA has determined that all identified flanges are qualified to the new criteria'except for the pump suction and discharge flanges on chilled water pumps (2VE-MPMP-096-A and -271-A, IVE-MPMP-213-B and -161-B, and OVK-MPMP-004-B)'for the control building and auxiliary building safety-related air-conditioning. The bolting on these flanges will be changed to "high-

-strength" bolting which will qualify them.

The revision of CEB-76-11 will prevent recurrence of this deficiency.

~

.All corrective actions for this item will be completed by September 1, 1985.

L

)