ML20127P517
| ML20127P517 | |
| Person / Time | |
|---|---|
| Site: | Mcguire, Catawba, McGuire  |
| Issue date: | 01/28/1993 |
| From: | DUKE POWER CO. |
| To: | |
| Shared Package | |
| ML20127P504 | List: |
| References | |
| NUDOCS 9302010308 | |
| Download: ML20127P517 (4) | |
Text
- - _ _ _ _ _ _ _ - _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Cto-A l
ADMlHISTRATIVE CONTROLS MONTHLY OPERATlHG REPORTS
- 6. 9.1. 8 Routine reports of operating statistics and shutdown experience, in-cluding documentation of all challenges to the PORVs or safety valves, shall be submitted on a monthly buis to the NRC in accordance with 10 CFR 50.4, no later than the 15th of each month following the calendar month co'ered by the report.
CORE OPERATING LIMITS REPORT 6.9.1.9 Core operating limits shall be established and documented in the CORE OPERATING LIMITS REPORT before each reload cycle or any remaining part of a reload cycle for the following:
1.
Moderator Temperature Coefficient BOL and E0L limits and 300 ppm surveillance limit for Specification 3/4.1.1.3, 2.
Shutdown Bank Insertion Limit for Specification 3/4.1.3.5, 3.
Control Bank Insertion Limits for Specification 3/4.1.3.6, 4.
Axial Flux Dif ference Limits, target band *, and APLHD* for Specification 3/4.2.1, HD** p (X,Y,2) and l
Heat Flux Hot Channel Factor, FRTP,K(Z),W(Z)**,APL 5.
,S W(Z)gg**forSpecification3/4.3.2,and L***
RTP 6.
Nuclear Enthalpy Rise Hot Channel Factor, FAH (X,Y) or, FhH ness and Power Factor Multiplier, MFAH
, limits for Specifica-tion 3/4.2.3.
g g7 The analytical methods used to ietermine the core operating limits shall be those previously reviewed and :: proved by NRC in:
1.
WCAP-9272-P-A, " WESTINGHOUSE RELOAD SAFETY EVALUATION HETH000 LOGY,"
July 1985 (W Proprietary).
(Methodology for Specifications 3.1.1.3 - Moderator Temperature Coefficient, 3.1.3.5 - Shutdown Bank Insertion Limit, 3.1.3.6 - Control Bank Insertion Limits, 3.2.1 - Axial Flux ND
^ Reference 5 is not applicable to target band and APL. HD
- References 4 and 5 are not applicable to W(Z), and APL
,andW(Q.
l
- Reference 1 is not applicable to FAH.
P
- Reference 5 is not applicable to F and MF3q.
t CATAWBA - UNITS 1 & 2 6 18 Amendment No.103 (Unit 1)
}
Amendment No. 97 (Unit 2) 9302010308 930128 PDR ADOCK 05000369 P
=.
Clo -b Inse'rt 2 7.
Overtemperature and Overpower Delta T setpoint parameter values for Specification 2.2.1.
8, 11oric Acid Storage System and itefueling Water Storage Tank volume and boron concentration limits for Specifications 3/4.1.2.5 and 3/4.1.2.6.
9.
Reactor Water Makeup Pump flowrate limits for Specifications 3/4.3.3.12 and I
3/4.9.7 10.
Accumulator and Refueling Water Storage Tank boron concentration limits for Specifications 3/4.5.1 and 3/4.5.4.
i i
i
=
.. ~,
f ADMINISTRATIVE CONTROLS
(
CORE OPERATING LIMITS REPORT
- 6. 9.1. 9 Core operating limits shall be established and documented in the CORE OPERATING LIMITS REPORT before each reload cycle or any remaining part of a reload cycle for the following:
1.
Moderator Temperature Coefficient BOL and EOL lim.its and 300 ppm surveillance limit for Specification 3/4.1.1.3, 2.
Shutdown Bank Insertion Limit for Specification 3/4.1.3.5, 3.
Control Bank Insertion Limits for Specification 3/4.1.3.6, 4.
Axial Flux Difference limits, target band *, and APLND* for Specification 3/4.2.1, TP 5.
Heat Flux Hot Channel Fcctor, F
, K(Z), W(Z)**, APLHO" and W(Z)gg" I
for Specification 3/4.2.2, and 6.
Nuclear Enthalpy Rise Hot Channel Factor, F ", or F Pa"*
and Power 5" Y Factor Multiplier, MF
"** limits for Specification 3/4.2.3.
I q
g, The analytical methods used to determine the core operating limits shall be those previously reviewed and approved by NRC in:
1.
WCAP-9272-P-A, " WESTINGHOUSE RELOAD SAFETY EVALUATION METHODOLOGY,"
July 1985 (W Proprietary).
(
(Methodology for Specifications 3.1.1.3 - Moderator Temperature Coefficient, 3.1.3.5 - Shutdown Bank Insertion Limit, 3.1.3.6 - Control Bank Insertion Limits, 3.2.1 - Axial Flux Difference, 3.2.2 - Heat Flux Hot Channel Factor, and 3.2.3 - Nuclear Enthalpy Rise Hot Channel Factor.)
2.
WCAP-10216-P-A, " RELAXATION OF CONSTANT AXIAL OFFSET CONTROL FQ SURVEILLANCE TECHNICAL SPECIFICATION", June 1983 (W Proprietary).
(Methodology for Specifications 3.2.1 - Axial Flux Difference (Relaxed Axial Offset Control) and 3.2.2 - Heat Flux Hot Channel Factor (W(Z) surveillance requirements for F Methodology.)
q 3.
WCAP-10266-P-A Rev. 2, "THE 1981 VERSION OF WESTINGHOUSE EVALUATION MODEL USING BASH CODE", March 1987, (W Proprietary).
(Methodology for Specification 3.2.2 - Heat Flux Hot Channel Factor.)
ND Reference 5 is not applicable to target band and APL NU References 4 and 5 are not applicable to W(Z), APL
, and W(Z)BL' Reference 1 is not applicable to F3g.
"" Reference 5 is not applicable to F[$nd MFg.
McGUIRE - UNITS 1 and 2 6-21 Amendment No.128 (Unit 1) l Amendment No.110 (Unit 2) 1
' M ('t b Insdri 4
[
4
{
7.
Ove: temperature and Overpower Delta T setpoint parameter values for Specification 2.2,l.
8.
Iloric Acid Storage System and l(efueling Water Storage Tank volume and txiron concenttation limits for Specificatkins 3/4.1,2.5 and 3/4.1.2.6.
+
9.
Accumulator and liefueling Water Storage Tank boron concentration limits for Specifications 3/4.5.1 and 3/4.5.5.
i R
-f f
i
+
1 L
1 l -
.