ML20080R065
| ML20080R065 | |
| Person / Time | |
|---|---|
| Site: | Robinson  |
| Issue date: | 02/15/1984 |
| From: | Morgan R CAROLINA POWER & LIGHT CO. |
| To: | James O'Reilly NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION II) |
| References | |
| IEB-79-02, IEB-79-14, IEB-79-2, RSEP-84-139, NUDOCS 8402280071 | |
| Download: ML20080R065 (2) | |
Text
.
y Form 244 a
Carolina Power & Light Company H. B.7 ROBINS T
RIC PLANT company correspondence HARTSVIL SOUTH C OLIN 29550 FEB151984 Robinson File No:
13510A Serial: RSEP/84-139 13510E Mr. James P. O'Reilly Regional Administrator,' Region II U. S. Nuclear Regulatory Commission 101 Marietta Street, Suite 3100
. Atlanta, Georgia ~30303 H. B. ROBINSON STEAM ELECTRIC PLANT, UNIT NO. 2 DOCKET NO. 50-261 LICENSE NO. DPR-23 IE BULLETINS IEB-79-02 & IEB-79-14
Dear Mr. O'Reilly:
This letter provides an updated plan and schedule for the completion of all open items associated with IE Bulletins 79-02 and 79-14.
l Af ter Mr. W P. Ang's inspection in April 1983, (IER-83-11) an extensive review of all~ the-inspections and calculations performed per the requirements of the Bulletins was initiated. This review was prompted by a number of paperwork discrepancies identified by Mr._Ang during his reviews. Our subsequent detailed review identified an extensive amount of work required to verify and document the accuracy of the field information and the proper transcription of this information to the "as-built" design documents. Our reviews further identified that-the deficiencies requiring verification and clarification did not result in any operability concerns. Based on the results of these reviews, a plan and schedule were developed to complete all Bulletin work.
The Bulletin closeout was divided into specific tasks. The following is a brief description of each task.
1)
Using the various revisions of the field data, verify that design isometrics are geometrically drawn. Geometric discrepancies between revisions of field data are field verified, and design isometrics are corrected es necessary.
2)
Convert chart method analyses to the static computer method.
3)
Using the various revisions of field data, sketch "as-built" drawings of each seismic restraint.
Identify any data relative to design that is not 8402290071 040215 l(
PDR ADOCK 05000261
(
G PM V
a
bett r to Mr.7 Jame1 P. O'Reilly 84 Seli:lt iRSEP/84-139
/
t PJg12.
- p,
'available in or is conflicting between data revisions Cbtain missing e'
s "as-built" data and correcej sketches as-cppropriate.
'4)
Vcrify design ~ isometrics relative to r "as-built" restraint details. Correct isometrics as tiecessary.
I 5)
Performicompu'ter strasa; analysis. using-the reverified "as-built" isometric.
~
r, 6)~. Provide restraint loads for'e'ach restraint.
-7)
Analyre restraints,1f their origin.11 design load increased or if the restraint configuration was different than' originally designed.
8)
Mod'ify restraints;if design conservatism.is required based on the reverified. final. design.
Technical review of' Bulletin ' rograms by independent third party.
9)1 P
1 ) ~ Assemble all d' sign packages and complete procedure changes.
e 11). Provide final report to NRC..
Although major modificacions are not expec't'ed, it is considered likely that some minor modifications may be necessary to some restraints. This is most likely on the-piping previously analyzed by the simplified (chart) method.. Any modifications determined to beinecessary will be' factored into the current outage schedule.. All inspections, "as-built" documentation, procedure changes, and modification identification are scheduled for completion by June 30, 1984, with modifications-to restraints scheduled for completion by the end of the Steam Generator Replacement Outage. Any necessary changes to this schedule due to' unforeseen.outa8e interferences or scope changes will be reported to you
-promptly.
If additional information is required'concerning the above, please contact my
. staff or me.
Very truly yours, R.
E.-
organ u
Ceneral. Manager H. B. Robinson ~ S. E. ' Plant CLW/ tid t
p 4
E
.