ML20059D370
| ML20059D370 | |
| Person / Time | |
|---|---|
| Site: | Mcguire, McGuire  |
| Issue date: | 05/23/1990 |
| From: | Entrekin M DUKE POWER CO. |
| To: | |
| Shared Package | |
| ML20059D350 | List: |
| References | |
| PROC-900523-02, NUDOCS 9009070014 | |
| Download: ML20059D370 (30) | |
Text
'
1k
$3 C%,,
DUKE POWER COMPANY ' NEC=IYIO PCP REVISION APPROVAL 1 O """
5, o.
Revised PCP Section: '4 , e,-
j#41 gr1tyk Corporate PCP, Rev. ,
I MNS PCP, Rev. 10 CNS PCP, Rev.
This revision has been reviewed against Technical Specifications, and applicable NRC guidance documents and found to be acceptable.
l Prepared By: M.B. Entrekin
Title:
Nuclear Production Enaineer Date: 3 8If # 0 1
General Office Review Statio.) Review By: 'N(4/3 bd,!/ By:
k
Title:
"[ [/a t Me cr[1t/ fit n fMt i Attr
Title:
A Ocu.,4 # b ,4 / Wi-Datet Tllt fC)ll Date: 5 ll5110 This revision is approved for use at _ McGuire Nuclear Station.
d&$ & }"l/4L.
Technical System Manager
~' CiMUS' WhY<[
Technical Services
^
Superintendent Date: dC////98 r <
Date: 5 /2.//9 C, r!rn L A NY MNS0 Station Man 4ger Date:- I!M D
\MBE/revapprl.068,p3 9009070014 900830 PDR ADOCK 05000369 R PDC i
s DUKE POWER COMPANY MCGUIRE NUCLEAR STATION
)
PROCESS CONTROL PROGRAM 1.0 PURPOSE The purpose of the McGuire Nuclear Station Process Control Program is to ensure all requirements of the DPC Corporate Process Control Program have been met for each container of solidified radioactive or mixed waste and dewatered radioactive waste shipped for burial at a licensed burial facility. The PCP is applicable only to the solifification or dewatering of liquid or wet solid radioactive waste.
2.0 COMPOSITION 2.1 The McGuire Nuclear Station PROCESS CONTROL PROGRAM shall consist of:
2.1.1 The Duke Power Company Corporate Process Control Program.
2.1.2 A list of all station-specific procedures that implement the requirements of the Cor.porate Process Control Program.
() 2 1.3 McGLire Nuclear Station diagrams, drawings or drawing numbers showing all interfaces betwe67 MNS radwaste systems and solidi-fication.s and dewatering equipment.
2.1.4 Documentation of NRC approval of the initial McGuire Nuclear Station Process Control Program.
l 2.1.5 Documentation of Technical System Manager Nuclear Chemistry, MNS Technical Services Superintendent and MNS Station Manager approval of the changes to the Corporate Process Control Program.
2.1.6 Documentation that all changes to the Corporate and/or MNS Process Control Program were sent to the NRC in the Semi-Annual Radioactive Effluent Report.
3.0 EXCEPTIONS 3.1 The McGuire Nuclear Station Process Control Program takes the following exceptions with DPC Corporate Process Control Program:
M-1 Rev. 10
l .
3.3.1 For Corporate PCP Section 3.1.3, station review and station Technical Services i O sun riat aa at verov t ar aat reautrea-Corporate review and approval of vendor solidification and dowatering services are sufficient.
PCP_MNS.107 O
O M-2 Rev. 10
l .
1 DUKE POWER COMPANY PROCESS CONTROL PROGRAM
() SECTION 2.1.2 IMPLEMENTING PROCEDURE CP/0/B/8300/20 "Radwaste Chemistry Procedure for Handling of Laboratory Quantities of Spent Resin" CP/0/B/8600/11 "Radwaste Chemistry Procedure for Sampling Evaporator Concentrates and Resin (Isolock Sampler)"
HP/0/B/1004/04 " Preparation and Shipment of Mechanical Radwaste Materials" HP/0/B/10 09 " Preparation and Shipment of Processed Radwaste Materials" HP/0/B/1004/12 " Utilization of Polyethylene High Integrity Overpacks" HP/0/B/1004/14 " Preparation and Shipment of Dewatered Resins" OP/0/B/6200/32 "Radwaste Procedure for the Nuclear Solid Waste (WS) Disposal System Operation" O OP/0/B/6200/37 i
"Radwaste Procedure for Contaminated Oil Storage Tank Operation" OP/0/B/6200/64 "Radwaste Chemistry Procedure for Transfer, Dewatering and Shipment of Bead Resin" OP/0/B/6200/65 "Radweste Chemistry Procedure for Transfer, Dewatering and Shipment of Powdex Resin" OP/0/B/6206/66 "Radwaste Chemistry Procedure for Dewatering and Shipment of Vendor Demineralizers and Filters" OP/0/B/6200/68 " Process Control Program for CNSI Cement Solidification Units" OP/0/B/6250/09 " Condensate Polishing Domineralizer Operation" OP/0/B/6200/84 " Chemistry Procedure for the Solidification of Grit Waste Generated by the Wet Grit Blast Decon Unit" O
M-3 Rev. 10
i
. i i
MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM SECTION 2.1.3 l
i DRAWING INDEX !
l 1
Plant Interfaces MC-1100-01.02 i MC-1423-19.32-02 i MC-1566-1.0 '
MC-1566-1.1 l MC-1566-2.0 '
MC-1566-3.0 ,
MC-1590-1.3 MC-1604-1.1 .
All portable system interfaces are shown on diagrams in the ,
applicable station procedure. !
I
)
I i
l I I
L l 5
i L ,
i
?
l L
l-O t M-4 Rev.'10 {
I 29,
, g}'A
_ /St D
DUKE POWER COMPANY PCP REVISION APPROVAL
?.AY 31 1990 Revised PCP Section: $ 0 A, 'j (3-
' 4 yyp 6N Corporate PCP, Rev. ,
MNS PCP, Rev. 10 CNS PCP, Rev.
This revision has been reviewed against Technical Specifications, and applicable NRC guidance documents and found to be acceptable.
Prepared By: M.B. Entrekin l
Title:
Nuclear Production Enaineer Date: 3 ilf # 0 1
General Office Review Station Review By: / N(44w B $ 1 ( k By: -
k Title t ' Nut [/a t M*Cr/fufleafiyj;ucr
Title:
A Ocu.4f "# .k d e Date: TlI o lGt3 Date: 5 /IS l 'I o This revision is approved for use at McGuiro Nuclear Station, i
d / d & A Q / A'. L . Cs WhY ,x{ ^
Technical System Manager ~ MAS Technical Services Superintendent Date: d f/h/98 Date: [/2d/9C3 l rl n ole W W MNS0 Station Maniger
~
Date: M!iD
\MBE/revapprl.068,p3 1
( .
DUKE POWER COMPANY MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM 1.0 PURPOSE The purpose of the McGuire Nuclear Station Process Control Program is to ensure all requirements of the DPC Corporate Process Control Program have been met for each container of solidified radioactive or mixed waste and dewatered radioactive waste shipped for burial at a licensed burial facility. The PCP is applicable only to the solifification or dewatering of liquid or wet solid radioactive waste.
2.0 COMPOSITION 2.1 The McGuire Nuclear Station PROCESS CONTROL PROGRAM shall consist of:
2.1.1 The Duke Power Company Corporate Process Control Program.
2.1.2 A list of all station-specific procedures that implement the requirements of the Corporate Process control Program.
() 2.1.3 McGuire Nuclear Station diagrams, drawings or drawing numbers showing all interfaces between MNS radwaste systems and solidi-fications and dewatering equipment.
2.1.4 Documentation of NRC approval of the initial McGuire Nuclear Station Process Control Program.
2 .1. :' Documentation of Technical System Manager Nuclear Chemistry, MNS Technical Services I Superintendent and MNS Station Manager l approval of the changes to the Corporate Process Control Program.
2.1.6 Documentation that cl1 changes to the l Corporate and/or MNS Process Control Program were sent to the NRC in the Semi-Annual I
l Radioactive Effluent Report.
3.0 EXCEPTIONS 3.1 The McGuire Nuclear Station Process Control Program takes the following exceptions with DPC Corporate Process Control Program:
O v
M-1 Rev. 10 j
3.1.1 For Corporate PCP Section 3.1.3, station review and station Technical Services O s=9 riat aa at 99 tov 1 r aot r euir a-Corporate review and approval of vendor solidification and dewatering services are sufficient.
PCP_,MNS.107 O
I O- i M-2 Rev. 10
DUKE POWER COMPANY PROCESS CONTROL PROGRAM
() SECTION 2.1.2 IMPLEMENTING PROCEDURE CP/0/B/8300/20 "Radwaste Chemistry Procedure for Handling of Laboratory Quantities of Spent Resin" CP/0/B/8600/11 "Radwaste Chemistry Procedure for Sampling Evaporator Concentrates and Resin (Isolock Sampler)"
HP/0/B/1004/04 " Preparation and Shipment of Mechanical Radwaste Materials" HP/0/B/1004/09 " Preparation and Shipment of Processed Radwaste Materials" i
HP/0/B/1004/12 " Utilization of Polyethylene High Integrity Overpacks" HP/0/B/1004/14 " Preparation and Shipment of Dewatered Resins" OP/0/B/6200/32 "Radwaste Procedure for the Nuclear Solid Waste (WS) Disposal System Operation" OP/0/ B/ 6200/37 "Radwaste Procedure for Contaminated Oil Storage Tank Operation" OP/0/B/6200/64 "Radwaste Chemistry Procedure for Transfer, Dewatering and Shipment of Bead Resin" OP/0/B/6200/65 "Radwaste Chemistry Procedure for Transfer, Dewatering and Shipment of Powdex Resin" OP/0/B/6200/66 "Radwaste Chemistry Procedure for cowatering and Shipment of Vendor Demineralizers and Filters" OP/0/B/6200/68 " Process Control Program for CNSI Cement Solidification Units" '
OP/0/B/6250/09 " Condensate Polishing Domineralizer Operation" 4
OP/0/B/6200/84 " Chemistry Procedure for the Solidification of Grit Waste Generated by the Wet Grit Blast Decon Unit" M-3 Rev. 10 f
MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM O SECTION 2.1.3 DRAWING INDEX Plant Interfaces: MC-1100-01.02 MC-1423-19.32-02 MC-1566-1.0 MC-1566-1.1 MC-1566-2.0 MC-1566-3.0 MC-1590-1.3 -
MC-1604-1.1 All portable system interfaces are shown on diagrams in the applicable station procedure.
O O
M-4 Rev. 10
t7 IS/
..f:.W
' AECCIVED DUKE POWER COMPANY
,- PCP REVISION APPROVAL i is :.uY 311990 ;
Revised PCP Section: '7g g Corporate PCP, Rev. ,
W !
ONS PCP, Rev. l' MNS PCP, Rev. 10 CNS PCP, Rev.
l This revision has been reviewed against Technical Specifications, and applicable NRC guidance documents and found to be acceptable. i Prepared By: M.B. Entrekin
Title:
Nuclear Production Encineer Date: 'i f Il f Cl 0 i General Office Review Station Review By: / N 4 /3 fA d o By: -
k O Titie: M euu N m L f,pur
Title:
A%& b Date: T fl o lCit) Date: 5 lN I10 This revision is approved for use at McGuire. Nuclear Station.
l S&$ & fl/Q 0h <f Technical System Manager MNS Technical Services Superintendent Date: d ////90 Date: [/2//9C) r!rw ~
A SY MNSOStation Man 6ger Date: 5fAS$O '
l
! y(')
\MBE/revapprl.068,p3 l
-_ a __ __ --
DUKE POWER COMPANY MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM 1.0 PURPOSE 4
The purpose of the McGuire Nuclear Station Process Control Program is to ensure all requirements of the DPC Corporate Process Control Program have been met for each container of solidified radioactive or mixed waste and dewatered l radioactive waste shipped for burial at a licensed burial !
facility. The PCP is applicable only to the solifification I or dewatering of liquid or wet solid radioactive waste.
2.0 COMPOSITION 2.1 The McGuire Nuclear Station PROCESS CONTROL PROGRAM 1 shall consist of:
2.1.1 The Duke Power Company Corporate Process Control Program.
2.1.2 A list of all station-specific procedures that implement the requirements of the Corporate Process Control Program.
2.1.3 McGuire Nuclear Station diagrams, drawings or drawing numbers showing all interfaces between MNS radwaste systems and solid'.-
fications and dewatering equipment.
2.1.4 Documentation of NRC approval of the initial McGuire Nuclear Station Process Control Program.
2.1.5 Documentation of Technical System Manager Nuclear Chemistry, MNS Technical Services Superintendent and MNS Station Manager approval of the changes to the Corporate Process Control Program.
2.1.6 Documentation that all changes to the Corporate and/or MNS Process Control Program were sent to the NRC in the Semi-Annual Radioactive Effluent Report.
3.0 EXCEPTIONS 3.1 The McGuire Nuclear Station Process Control Program takes the following exceptions with DPC Corporate Process Control Program:
M-1 Rev. 10
l 3.1.1 For Corporate PCP Section 3.1.3, station review and station Technical Services O sue riat aa at 99 rov 1 r aot reautrea-Corporate review and approval of vendor solidification and dewatering services are sufficient.
PCP_MNS.107 l
O I
l 0
M-2 pey, . lo
DUKE POWER COMPANY PROCESS CONTROL PROGRAM
'( ) SECTION 2.1.2 IM.PLEMENTING PROCEDURE CP/0/B/8300/20 "Radwaste Chemistry Procedure for Handling of Laboratory Quantities of Spent Resin" CP/0/B/8600/11 "Radwaste ChGe.ictry Procedure for Sampling Evaporator Cor':entrates and Resin (Isolock Sampler)"
HP/0/B/1004/04 " Preparation and Shipment of Mechanical s Radwaste Materials" HP/0/B/1074 ffA "Preparatic'? and Shipment of Processed Radwaste Materials" HP/0/B/1006/12 " Utilization of Polyethylene High Integrity Overpacks" HP/0/B/1004/14 " Preparation and Shipment of_Dewatered Resins" >
OP/0/B/6200/32 "Radwaste Procedure for the Nuclear Solid Waste (WS) Disposal System Operation" OP/0/B/6200/37 "Radwaste Procedure for Contamina'edt Oil Storage Tank Operation" OP/0/B/6200/64 "Radwaste Chemistry Procedure for Transfer, Dewatering and Shipment of Bead Resin" i
OP/0/B/6200/65 "Radwaste Chemistry Procedure for Transfer, Dewatering and Shipment of Powdex Resin" OP/0/B/6200/66 "Radwaste Chemistry Procedure.for_ Dewatering and Shipment of Vendor Demineralizers and i
Filters" OP/0/B/6200/68 " Process Control Program for CNSI Cement l Solidification Units" l OP/0/B/6250/09 " Condensate Polishing Demineralizer Operation" OP/0/B/6200/84 HChemistry Procedure for the Solidification. ,
of Grit Waste Generated by the Wet Grit Blast Decon Unit" i
M-3 Rev. 10 4
C MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM 9 SECTION 2.1.3 :
DRAWING INDEX Plant Interfaces: MC-1100-01.02 MC-1423-19.32-02 MC-1566-1.0 MC-1566-1.1 MC-1566-2.0 MC-1566-3.0 MC-1590-1.3 MC-1604-1.1 All portable system interfaces are shown on diagrams in the applicable station procedure.
O O
M-4 Rev. 10
za p %,, , ED DUKE POWER COMPANY PCP REVISION APPROVAL ,
b .
Revised PCP Section: 7 %.
'A 4
'pY 4l gn$tD' Corporate PCP, Rev. ,
MNS PCP, Rev. 10 CNS PCP, Rev.
This revision has been reviewed against Technical Specifications,-
and applicable NRC guidance documents and found to be acceptable.
Prepared By: M.B. Entrekin
Title:
Nuclear Production Enaineer Date: 3 Il f # 0 1
General Office Review Station Re iew By: 'Ofhukb bt -
By: -
k
Title:
Y[ lid /a( )6 Cr[lu l'it p ( h,g; uc r
Title:
A occc I c E3,,,<r Date: TflI ff )
il Date: I / I'I I 9 0 This revision is approved for use at McGuire Nuclear Station.
d & $ & N A.ln' Technical System Manager (5 k MNS Technical Services Superintendent Date: d /w/9C Date: [/2 //9C>
r Y m .1< S Y
~
MNSOStation Man 6ger Date: $f2-5 0
\MBE/revapprl.068,p3
)
1 DUKE POWER COMPANY l MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM i
i 1.0 PURPOSE i The purpose of the McGuire Nuclear Station Process Control Program is to ensure all requirements of the DPC Corporate Process Control Program have been met for each container of solidified radioactive or mixed waste and dewatered !
radioactive waste shipped for burial at a licensed burial :
facility. The PCP is applicable only to the solifjfication i or dewatering of lie id or wet solid radioactive waste.
2.0 COMPOSITION 2.1 The McGuire Nuclear Station PROCESS CONTROL PROGRAM i shall consist of:
l 2.1.1 The Duke Power Company Corporate Process :
Control Program.
2.1.2 A list of all station-specific procedures that implement the requirements of the Corporate Process Control Program.
() 2.1.3 McGuire Nuclear Station diagrams, drawings or drawing numbers showing all interfaces between MNS radwaste systems and solidi-fications and dewatering equipment.
2.1.4 Documentation of NRC approval of the initial McGuire Nuclear Station Process Control Program.
2.1.5 Documentation of Technical System Manager ,
Nuclear Chemistry, MNS Technical Services Superintendent and MNS Station Manager appeoval of the changes to the Corporate r,ocess Control Program.
2.1.6 Documentation that all changes to the Corporate and/or.MNS Process Control Program were sent to the NRC in the Semi-Annual Rat?.ioactive Effluent Report.
3.0 EXCEPTIONS 3.1 The McGuire Nuclear Station Process Control Program takes the following exceptions with DPC Corporate Process Control Program:
O M-1 Rev. 10 i
3.1.1 For Corporate PCP Section 3.1.3, station review and station Technical Services O superiateaaeat enerovet ere aot reautrea-Corporate review and approval of vendor solidification and dewatering services are i sufficient.
I l
s PCP_MNS.107 O
O M-2 Rev. 1]
4 DUKE POWER COMPANY PROCESS CONTROL PROGRAM SECTION 2.1.2 lll IMPLEMENTING PROCEDURE "Radwaste Chemistry Procedure for Handling CP/0/B/8300/20 of Laboratory Quantities of Spent Resin" "Radwaste Chemistry Procedure for Sampling CP/0/B/8600/11 Evaporator Concentrates and Resin (Isolock Sampler)"
HP/0/B/1004/u
" Preparation and Shipment of Mechanical Ra.dwaste Materials" HP/0/B/1004/09
" Preparation and Shipment of Processed Radwaste Materials" HP/0/B/1004/12
" Utilization of Polyethylene High Integrity Overpacks" HP/0/B/1004/14 " Preparation and Shipment of Dewatered Resins" OP/0/B/6200/32 "Radwaste Procedure for the Nuclear Solid Waste (WS) Disposal System Operation" OP/0/B/6200/37 "Radwaste Procedure for Contaminated Oil Storage Tank Operation" "Radwaste Chemistry Procedure for Transfer, OP/0/B/6200/64 Dewatering and Shipment of Bead Resin" "Radwaste Chemistry Procedure for Transfer, OP/0/B/6200/65 Dewatering and Shipment of Powdex Resin" "Radwaste Chemistry Procedure for Dewatering OP/0/B/6200/66 and Shipment of Vendor.Demineralizers and Filters"
" Process Control Program for CNSI Cement OP/0/B/6200/68 Solidification Units"
" Condensate Polishing Demineralizer OP/0/B/6250/ 09 Operation" OP/0/B/6200/84
" Chemistry Procedure for the Solidification of Grit Waste Generated by the Wet Grit Blast' Decon Unit" O
M-3 Rev. 10 l
MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM O SECTION 2.1.3 DRAWING INDEX Plant Interfaces: MC-1100-01.02 MC-1423-19.32-02 '
MC-1566-1.0 MC-1566-1.1 MC-1566-2.0 MC-1566-3.0 MC-1590-1.3 MC-1604-1.1 All portable system interfaces are shown on diagrams in the applicable station procedure.
O)
O.
M-4 Rev. 10 I
3Q.
~
g :+ w % ,,
D '
DUKE POWER COMPANY .
PCP REVISION APPROVAL O ;4AY 311990 O 6 Revised PCP Section: 4'O 4' p5419fn6Y' Corporate PCP, Rev. ,
l MNS PCP, Rev. 10 l CNS PCP, Rev.
l l This revision has been reviewed against Technical Specifications, and applicable NRC guidance documents and found to be-acceptable.
Prepared By: M.B. Entrekin
Title:
Nuclear Production Encineer Date: 3 8If 6 0 1
General Office Review Station Review By: /)[(4up8 ((d / By: f- k
Title:
Y(4/[/(t t Metchyf't,n (ht;ucr
Title:
A 5 5vu. 4 e bagt or Date: T lII fl1 il Date: 516190 This revision is approved for use at McGuire Nuclear Station.
b . . . d&L & NA.L Technical System Manager (i 7 'I MNS Technical. Services Superintendent Date: d C////90 Date: [/2//7C) r
!rw L $$
~
MNSOStation Man 4ger l
Date: I3 D
,Pi \MBE/revapprl.068,p3 O \
l l
l
L DUKE POWER COMPANY MCGUIRE NUCLEAR STATION O PROCESS CONTROL PROGRAM 1.0 PURPOSE The purpose of the McGuire Nuclear Station Process Control Program is to ensure all requirements of the DPC Corporate Process Control Program have been met for each container of solidified radioactive or mixed waste and dewatered radioactive waste shipped for-burial at a licensed burial facility. The PCP is applicable only to the solifification or dewatering of liquid or wet solid radioactive waste.
2.0 COMPOSITION 2.1 The McGuire Nuclear Station PROCESS CONTROL PROGRAM shall consist of:
2.1.1 The Duke Power Company Corporate Process Control Program.
2.1.2 A list of all station-specific procedures that implement the requirements of the Corporate Process Control Program, k 2.1.3 McGuire Nuclear Station diagrams, drawings or drawing numbers showing all interfaces between MNS radwaste systems and solidi-fications and dewatering equipment.
2.1.4 Documentation of NRC approval of the initial McGuire Nuclear Station Process control Program.
2.1.5 Documentation of Technical System Manager Nuclear Chemistry, 10iS Technical Services Superintendent and MNS Station: Manager approval of the changes to the Corporate Process Control Program.
2.1.6 Documentation that all changes to the Corporate and/or MNS Process Control Program were sent to the NRC in the Semi-Annual Radioactive Effluent Report.
3.0 EXCEPTIONS 3.1 The McGuire Nuclear Station Process Control Program takes the following exceptions with DPC Corporate Process Control Program:
O M-1 Rev. 10
4 3.1.1 For Corporate PCP Section 3.1.3, station review and station Technical services
-O superiat aa at verov 1 r aot reeutrea.
Corporate review and approval of vendor solidification and dewatering servic'es are sufficient.
PCP_MNS.107 i
O 1
O d
M-2 Rev. 10 i
. ?
a DUKE POWER COMPANY PROCESS CONTROL PROGRAM (g
r~
j SECTION 2.1.2 IMPLEMENTING PROCEDURE l
CP/0/B/0300/20 "Radwaste-Chemistry Procedure for Handling of Laboratory Quantities of Spent Resin" CP/0/B/8600/11 "Radwaste Chemistry Procedure for Sampling Evaporator Concentrates and Resin (Isolock Samplor)"
HP/0/B/1004/04 ' " Preparation and Shipment of Mechanical l Radwaste Materials" HP/0/B/1004/09 " Preparation and Shipment ! of Processed Radwaste Materials" HP/0/B/1004/12 " Utilization of Polyethylene High Integrity Overpacks" HP/0/B/1004/14 " Preparation and Shipment of.Dewatered Resins" OP/0/B/6200/32 "Radwaste Procedure for the Nuclear Solid Waste (WS) Disposal System Operation" OP/0/B/6200/37 "Radwaste Procedure for Contaminated Oil Storage Tank Operation" l OP/0/B/6200/64 "Radwaste Chemistry Procedure for Transfer, l Dewatering and Shipment of Bead Resin" i
OP/0/B/6200/65 "Radwaste Chemistry Procedure for Transfer, Dewatering and Shipment of Powdex Resin" l OP/0/B/6200/66 "Radwaste Chemistry Procedure for Dewatering and Shipment of Vendor Demineralizers and Filters" .
OP/0/B/6200/68 " Process Control Program for CNSI Cement Solidification Units" OP/0/B/6250/09 " Condensate Polishing Demineralizer Operation" OP/0/B/6200/84 " Chemistry Procedure for the Solidification of Grit Waste Generated by the Wet Grit Blast Decon Unit" l
l M-3 Rev. 10
1
.. l
. l MCGUIRE NUCLEAR STATION PROCESS CONTROL PROGRAM O SECTION 2.1.3 DRAWING INDEX Plant Interfaces: MC-1100-01.02 MC-1423-19.32-02 MC-1566-1.0 MC-1566-1.1 MC-1566-2.0 MC-1566-3.0 MC-1590-1.3 MC-1604-1.1 All portable system interfaces-are shown on diagrams in the applicuble station procedure.
i O
M-4 Rev. 10
\
3j
~
3.sp C%si, DUKE POWER COMPANY ED PCP REVISION APPROVAL O = 2*
'.s e Revised PCP Section: '?$, G-
- 4 gmy\tb Corporate PCP, Rev. ,
MNS PCP, Rev. 10 CNS PCP, Rev.
This revision has been reviewed against Technical Specifications, and applicable NRC guidance documents and found to be acceptable.
Prepared By: M.B. Entrekin
Title:
Nuclear Production Encineer Date: $ 83 ] # 0 8
General Office Review Station Review '
By: [NU@/3 fuY1/ By: -
k
Title:
~kittl((tt h6CclluYles(nt;acy
Title:
h occd C 0 9 ,% + w 3
Date: TflIlGLD Date: 5 lN I 'l 0 This revision is approved for uso at McGuire Nuclear Station.
I d&L & AR/x.L. Ci Y h (N,'i Technical System Nanager MNS Technical Services Superintendent Date: d /h/90 Date: 5/2//9C) rlm L W?
MNSvStation Manitger Date: I!1 iD
\MBE/revapprl.068,p3
DUKE POWER COMPANY MCGUIRE NUCLEAR STATION ,
1.0 PURPOSE The purpose of the McGuire Nuclear Station Process Control Program is to ensure all requirements of the DPC Corporate Process Control-Program have been met for eala container of l solidified radioactive or-mixed waste and dewatered !
radioactive waste shipped for burial at a licensed burial !
facility. The PCP is applicable only to the solifification or dewatering of liquid or wet solid radioactive waste.
2.0 COMPOSITION 2.1 The McGuire-Nuclear Station PROCESS CONTROL PROGRAM shall consist of:
2.1.1 The Duke Power Company Corporate Process Control Program.
2.1.2 A list of all station-specific procedures that implement the requirements of the Corporate Process Control Program.
() 2.1.3 McGuire Nuclear Station diagrams, drawings or drawing numbers showing all; interfaces between MNS radwaste systems and solidi-fications and dewatering equipment.
2.1.4 Documentation of NRC approval of the initial McGuire-Nuclear Station Process Control Program.
2.1.5 Documentation of Technical System Manager Nuclear Chemistry, MNS Technical Services q Superintendent and MNS Station. Manager approval of the changes to the Corporate i Process Control Program.- l l
2.1.6 Documentation that all changes to.the I Corporate and/or MNS Process. Control. Program I were sent to the NRC in the Semi-Annual l Radioactive Effluent Report.
3.0 EXCEPTIONS l 3.1 The McGuire Nuclear Station Process Control Program ~
takes the following exceptions with DPC Corporate ,
Process Control Program: '
O M-1 Rev. 10
3.1.1
.O For Corporate PCP Section 3.1.3 ,
station review and-station varov 1Technical r
Services .
Corporate review and aot approval of vendosu r 2= tree-solidification and dewatering servicesr are sufficient.
PCP_MNS.107 O
M-2 Rev. 10
3.1.1 For Corporate PCP Section 3.1.3, station review and station Technical Services-O 1
see riat aa at 99rev 1 r aet reaoir a-Corporate review and approval of vendor ,
solidification and dewatering services are !'
sufficient.
PCP_MNS.107 i
l O
O !
l l
M-2 Rev. 10
4 DUKE POWER COMPANY PROCESS CONTROL PROGRAM
() SECTION 2.1.2 IMPLEMENTING PROCEDURE CP/0/B/8300/ 20 . "Radwaste Chemistry Procedure for Handling of Laboratory Quantities of Spent Resin" CP/0/B/8600/11 "Radwaste Chemistry Procedure for Sampling Evaporator Concentrates and Resin (Isolock Sampler)"
HP/0/B/1004/04 " Preparation and Shipment of Mechanical Radwaste Materials"
~
HP/0/B/1004/09 " Preparation and Shipment of Processed Radwaste Materials" HP/0/B/1004/12 " Utilization cf Polyethylene High Integrity Overpacks" HP/0/B/1004/14 " Preparation anc Shipment of Dewatered Resins" OP/0/B/6200/32 "Radwaste Procedure for the Nuclear Solid Waste (WS) Disposal System Operation" OP/0/B/6200/37 "Radwaste Procedure for Contaminated Oil Storage Tank Operation" OP/0/B/6200/64 "Radwaste Chemistry Procedure for Transfer, C9 watering and Shipment of Bead Resin" OP/0/B/6200/65 "Radwante Chemistry Procedure for Transfer, Dewatering and Shipment of Powdex Resin" OP/0/B/6200/66 "Radwaste Chemistry Procedure for Dewatering and Shipment of Vendor Demineralizers and Filters" OP/0/B/6200/68 ." Process Control Program for CNSI Cement Solidification Units" OP/0/B/6250/09 " Condensate Polishing Demineralizer Operation" OP/0/B/6200/84 " Chemistry Procedure for the Solidification of Grit Waste Generated by_the Wet Grit Blast Decon Unit" O
M-3 Rev. 10
~,
i I
MCGUIRE NUCLEAR STATION PROCESS. CONTROL PROGRAM l
($) SECTION 2.1.3 i' DRAWING INDEX Plant Interfaces: MC-1100-01.02 MC-1423-19.32-02 !
MC-1566-1.0 MC-1566-1.1 MC-1566-2.0 MC-1566-3.0 MC-1590-1.3 MC-1604-1.1 All portable system interfaces are shown on diagrams in the '
I applicable station procedure.
()
O M-4 Rev. 10