ML20005F757

Rev 12 to Procedure AR-403, PSA H Annunciator Response

ML20005F757
Person / Time
Site:	Crystal River
Issue date:	12/14/1989
From:	Marshall W FLORIDA POWER CORP.
To:
References
AR-403, NUDOCS 9001170223
Download: ML20005F757 (13)

Text

.

DOCUMENT TRANSMITTAL FORM 21009 i

FOR DOCUMENTS TRANSMITTED TO DC DESK (NRC)*

DATE: 15'DEC 19S9 BATCH:

108 DOCUMENT NUMBER SHEET NUMBER REVISION NUMBER COPY NUMBER AR 403 12 24 INSTRUCTIONS TO THE ADDRESSEE COMPLETE EACH OF THE INSTRUCTIONS BELOW WHICH ARE MARKED WITH AN " -X "

(1) VERIFY THE DOCUMENTS RECEIVED AGREE WITH THE ABOVE DESCRIPTION (2) INCORPORATE THE TR ANSMITTED DOCUMENTS INTO YOUR FILES (3) DESTROY DOCUMENTS OR PORTIONS OF DOCUMENTS SUPERSEDED BY THE ABOVE jf_ (4 ) SIGN AND DATE IN THE SPACES BELOW INDICATING THAT YOU COMPLETED THESE INSTRUCTIONS.

(5) SIGN BELOW INDICATING, THAT YOU HAVE: READ AND UNDERSTOOD THE CHANGES AS IDENTIFIED 1 (6) RETUNN TO' DOCUMENT CONTROL, CRYSTAL RIVER UNIT ' 3, ' MAC#

NA1C___

NR2A__I_ FL A.

POWER CORP.,

P. O.

BOX 219 CRYSTAL RIVER FLA, 32629 SIGNATURE OF ADDRESSEE DATE' INDEPENDENT VERIFICATION

_DATE (OPS) 0 V 1

9001170223 891214 PDR..ADOCK 05000302 F

PDC

~-

e Rev. 12 12/14/89 i

i

• • wwnwzenn$$*****

M Document s ORM ATioN ONL k y

C.n,Nuegge, c

l+

i l

ANNUNCIATOR RESPONSE AR-403 FLORIDA POWER CORPORATION CRYSTAL RIVER UNIT 3 i

O)

PSA H ANNUNCIATOR RESPONSE 4

t i.

i.-

THIS PROCEDURE ADDRESSES SAFETY RELATED CONPONENTS l

L i-i APPROVED BY:

Interpretation' Contact

/

Dat'e:

<8 /

87 O

-t INTERPRETATION CONTACT:

Nuclear Operation Superintendent

AV

/*~

' g ANNUNCIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 1-WINDOW TITLE-1.

INDICATED CONDITION 1.

AUTO ACT104

'SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY GR 2.

OPERATOR ACTION - VALIO ALARM ELEMENT PINPOINT TROUBLE NUMBER &

LOCATION GAMMA

1. a) Gamma Hi radiation alarm.

1. a) Local alarm sounds.

SEE RAD-RAD MON RADIATION b) See annunciator typer and note H-1-1,

2. a) Notify Chem / Rad.

MONITOR PANEL' HIGH

2. a). Check rad monitor system as indicated.

SETPOINT.

LOG BOOK H-1-1 GAMMA

1. a) Gamma monitor indicate instrument failure.

1. a) None.

SEE RAD RAD MON MONITOR or radiation. level in excess of warntng

2. a) Notify Instruments and Controls Supervisor.

MONITOR

' PANEL VARNING

. setpoint.

b) Notify Chem / Rad.

SETPOINT b) See annunciator typer and note H-1-1.

LOG BOOK H-1-2

2. a) Check appropriate rad monitor.

H-1-3 H-1-4 MN STM LINE

1. a) Indicates instrument failure or radiation-

1. a) None.

7/B HIGH RAD level ~in. excess of Alarm Setpoint.

2. a) Check MS Line Monitors.

MONITOR FAIL

2. a) Monitor RMA-12.

b) Refer to EP-390 (SGTL).

H-1-5 H-1-6

.00 STOR TANK

1. a) High level in 00-storage tank 1 97".H 0.

1. a) None'(tank should auto fili).

1 97" H O DO-4-LS

~

2 2

LEVEL b) Low level in D0 storage tank.

2. a) Notify Nuclear Auxiliary Operator if alarm 1 33" H O 00-3-LS 2

persists.

HIGH/ LOW

2. a)'None.

H-1-7 H-1-8 AR-403 Rev 11:

Page 1.

t 4

s y

3y_o.-e. -..

m

.s.

i

)

(

)

1

' -~

%/

%/

%../

ANNUNCIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 2

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUT3 ACTION SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM

. ELEMENT PINPOINT TROUBLE NUMBER &

ATMOSPHERIC

1. a) Atmospheric High radiation alarm.

1. a) None.

SEE RAD RAD MON RADIATION b) See annunciator typer and note H-2-1.

2. a) Refer to AP-250 (RMA).

MONITOR PANEL HIGH

2. a) Check rad mon panel.

SETPOINT LOG BOOK H-2-1 A MOSPHERIC

1. a) Indicates instrument failure, or radiation

1. a) None.

SEE RAD RAD MON MONITOR level in excess of warning setpoint.

2. a) Notify Chemistry and HP MONITOR PANEL VARNING b) Flow High/ Low.

See Note H-2-2.

SETPOINT c) See annunciator typer and Notes H-2-1 and LOG BOOK H-2-2.

H-2-2

2. a) Check rad mon panel.

H-2-3 H-2-4 EDAS

1. a) Loss of Multipicxer Power.

1. a) None.

SYSTEM b) Primary Met. Tower on Back-up Power.

2. a) Notify I&C Supervisor.

TROUBLE c) Primary Met. Tower Back-up Power Out of Sync.

d) Primary Met.' Tower Signal Failure.

e Primary met. Tower Building Temp High/ Low.

H-2-S

2. a EDAS Alarm Panel.

SUMP LEVEL

1. a) Aux. Bldg. sump level > 92.S*

1. a) None.

WD-132-LS HIGH elevation.

2. a) Dispatch personnel to determine source of WD-133-LS b) DH Pit A sump level > 74* elevation.

determine source of flooding.

WD-134-LS

.H-2 c) DH Pit B sump level > 14' elevation, b) Terminate flooding.

SD-31-LS d) Condensate Pump Pit A sump level > 88.6*

c) Refer to AP-1050 (Flood).

SD-32-LS eievation.

SD-S-LS3 e) Condensate Pump Pit B sump level > 68.6*

SD-6-LS3 elevation.

f) Nuclear Service Cooler area sump level

> 96.5 elevation.

g) Tendon Access Gallery sump > 72.S*

elevation.

2. a) None.

AR-403 Rev. 12 Page 2

-u.--

a

'n f'~~

(f CN

(),'.

s,

3 E..

'?.CA01CIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 2

.l 1.

INDICATED CONDITION.

1.

AUTO ACTION 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROURLE NUMBER &

LOCATION BLD6 SUMPS /

1. a) Diesel generator sump level high.

1. a) Sump pump auto start.

SUMP PUMP b) DH sump level > 74* elevation and pump

2. a) Investigate cause of level increase.

TROUBLE ~

not running.

b) Return sump to normal level.

c) DH sump pump auto start.

c) Notify Aux Bldg Operator d) Aux. Bldg. sump pump auto start or pump d) Check oil / water separator trip.

e) Laundry and shower sump level > 91.5*

elevation or pump auto start or pump trip.

f) Turbine Butiding' sump level 1 91.S*

elevation or oil / water separator trouble.

SD-24-LS2 g) Intake electric vault level 1 18' h) Sewage pit level high.

i) Waste Gas Comp Seal Leak DR TK Low Level WD-302-LS2

2. a) None.

H-2-7 SEC SAMPLE 1.. a) Alarm on secondary sample panei that has

1. a) None.

SS-071-CIR SYSTEM not been acknowledged within'the timer

2. a) Notify Chemistry.

ALARM setting.

b) Refer to CP-138 b) Hotwell condensate conductivity high.

2. a) Condensate conductivity recorder.

- AR-403 Rev. 12 Page 3 w

=

,. - +.

..Y Y

~N t

ANNUNCIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 3

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUTO ACTION SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROUBLE NUMBER &

LOCATION LIQUID

1. a) Liquid Hi rad.

1. al if RML-2 hi rad alarm WDV-891 closes and RADIATION b) See annunciator typer and note H-3-1.

WDV-892 closes.

RAD MON HIGH

2. a) Check liquid alarm monitors.

2. a) Notify Assistant Nuclear Operator and PANEL

. Chem / Rad.

b) Determine source of contamination and isolate.

-H-3-1 c) Refer to AP-250 (RMA).

LIQUID

1. a) Indicates instrument failure, or radiation

1. a) None.

MONITOR level in excess of warning setpoint.

2. a) Notify Instruments and Controls Supervisor RAD MON WARNING b) See annunciator typer and Note H-3-1.

and Chem Rad.

PANEL

2. a) Check liquid alarm monitor.

b) Determine source of contamination and H-3-2 iso' ate.

RM-L2/1

1. a) Defeat interlock between valve SDV-90 and

1. a) Allows opening of SDV-90 with RWP-2A & 2B INTERLOCK RWP-3A & 3B.

(Interlock does not allow running and RVP.-3A & 3B idle.

KEYLOCK BYPASSED opening of SDV-90 while RWP-3A & 3B are b) Allows opening of WDV-892 with RWP-3A or SWITCH

~

not in operation.)

3B running and RWP-2A & 2B idle, b) Defeat interlock between valve WDV-892 and

2. a) None.

RWP-2A & 28.

H-3-3

2. a) None.

H-3-4 FLUSH WATER

1. a) Decreasing header press at 15 psig.

1. a) None.

00-2-PS SYSTEM PRESS

2. a) None (loss of pump).

2. a) Start flush water pump or 1 75 psig TD-LFP LOW b) Start RWP-2A or RWP-28.

H-3-S FLUSH WAIER

1. a) Control switch in normal after start and

1. a) None.

CS/SC PUMP brk open.

2. a) Start standby pump.

CS/0 AUTO STOP

2. a) Brk indicates open.

H-3-6 FLUSH WAIER

! a) Control switch in normal af ter stop and

1. a) None CS/SC PUMP brk closed.

2. a) Matc' target.

CS/0 AUTO START

2. a) Brk indicates closed.

b) Dete r me causC of low pressure.

H-3-7 SW SYSTEM

1. a) 00V-238 or D0V-210 open.

1. a) None.

SUPPLYING

2. a) 00V-23B or D0V-210 indicates open.

2. a) Monitor SW Serge Tank level.

FLUSH WATER H-3 8 AR-403 Rev. 11 Page 4

~,

q

,m

\\

I

(

\\

1.

~

~

J q./. _

t ANNUNCIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 4

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUTO ACTION SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROUBLE NUMBER &

LOCATION MAKEUP TANK

1. a) Lo-Lo level 1 18".

1. a) MUV-58 and MUV-13 open.

1 18" H O 2

LEVEL

2. a) Makeup tank level.

2. a) Restore normal level.

LOW-LOW H-4-1 MAKEUP.IANK

1. a) Hi level 1 86".

1. a) None.

1 86" H'O

< 55' H,0 MU-14-LSI LEVEL b) Low level 1 55".

2. a) Monitor closelv and restore normal level.

HIGH/ LOW

2. a) Makeup tank level.

H-4-2 MAKEUP

1. a) > 160 GPM through MUV-31 (or bypass).

1. a) None.

MU-60 MU-24-FS FLOW

2. a) Indicated makeup flow > 160 GPM.

2. a) If high flow continues refer to AP-380 MU-47 HIGH (ESA) or EP-390 (SGTL).

H-4-3 LEIDOWN

1. a) Inlet to prefilters 1 130*F.

1. a) None.

1 130'F MU-5-15 TEMP

2. a) Monitor letdown temp.

2. a) If temperatere continues to increase HIGH reduce flow or increase cooling water.

H-4-4 RC PUMP

1. a) RCP-A control bleed of f 1 1.75 gpm.*

1. a) None.

SEAL BLEED OFF b) RCP-B control bleed off 1 1.75 gpm.*

2. a) Re-estabitsh bleed off.

I 1.75 MU-31-FSI HIGH c) RCP-C control bleed off 1 1.75 gpm.*

1 1.75 MU-31-FS2 d) RCP-D control bleed off 1 1.75 gpm.*

1 1.75 MU-31-FS3 H-4-5

2. a) None.

> I.75 MU-31-FS4 MAKEUP.IANK

1. a) Hi press 1 15 psig.

1. a) None.

I 15 psig MU-17-PS PRESS b) Lo press 1 3 psig.

2. a) Add Hydrogen as necessary.

1 3 psig HIGH/LOV

2. a) MU tank press / level.

H-4-6 RC PUMP SEAL

1. a) MUV-253 less than f ull open.

1. a) None.

Relay RTN (MUV-253) 2.'a) MOV-253 limit switch lights.

2.-a) Reopen MUV-253.

AF-3MUV-NOT FULL OPEN 2530 H-4-7 MAKEUP VALVES

1. a) Control air tank MUV-51, 31.16 & 253 low -

1. a) Va lve(s) lock as is.

RELAY AIR press

2. a) To operate valve until air' pressure RACK FAILURE

2. a)' Air fail back lite pushbutton.for restored, depress air fail pushbutton.

associated valve is illuminated.

H-4-8

• These points have been disabled by-TMAR-89-06-14-01 AR-403~

Rev. 11 Page 5

e m

.g...

(,)

V V,

t ANNUNCIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 5

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUTO ACTION SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROUBLE MUMBER &

LOCATION STM GEN A 1 a) EFIC CH. A or CH.'B Main Steam Isolation

1. a) MSIV on affected OTSG closes.

MAIN STEAM ISO Actuation.

2. a) Refer to AP-460 (SGIA).

ACTUATED b) Half. trip on EFIC CH A or CH B.

b) Notify I&C of EFIC half trip (Refer to H-5-]

SP-146).

SIM GEN A

1. a) EFIC CH. A or CH. 8 Main Feed isolation

1. a) Main FW Block valve closes.

FEEDWATER 150 Actuation.

b) LO Load FW Block valve closes.

ACTUATED b) Half trip on EFIC CH A or CH B.

c) SU Block valve closes.

d) FWP Suction valve closes.

2. a) Refer to AP-460 (SGIA).

b) Notify l&C of EFIC half trip (Refer to H-5-2 SP-146).

MAIN STEAM

!. a) Air supply pressure low for MSV-411

1. a) Possible closure of 2 MSIV's.

1 80 psig MS-98-PS 150 VLV MSV-412.

2. a) 1F 2 MSIV's close. THEN trip reactor.

MS-99'PS AIR FAILURE b) Air supply pressure low for MSV-413 b){IF reactor tripped. THEN refer to AP-580 RT).

MSV-414.

H-5-3

2. a) Instrument air oressure.

LEIDOWN

1. a) Outlet of block orifice 1 145 pstg.

1. a) None.

3 145 pstg MU-6-PS PRESS

1. a) None.

2. a) 1F alarm does not clear. THEN shut MUV-49.

HIGH b) Determine cause of Hi press before H-5-4 recoenino MUV-49.

MAKEUP FILIERS

1. a) Makeup Postfilter DP 1 25 psid.

1. a) None.

1 25 pstd MU-18-OPS

-a PRESS b) Makeup Prefilters DP 1 12 psid.

2. a) Shift to clean filter if available.

I 12 psid MU-81-PS HIGH

2. a) Control Board Indication.

b) If'not reduce letdown flow.

H-5-5 MAKEUP DEMIN

1. a) DP-3 14 psid.

1. a) None.

I 14 psid MU-75-PS a PRESS

2. a) Indication 1 14 psid.

2. a) Shift to standby demin or bypass.

HIGH (Reducing letdown flow will lower DP).

H-5-6 RC PUMP

1. a) Total sea l f low hign/ low.

1. a) None.

1 42 gpm MU-21-FS SEAL FLOWS b) RCP-A seal flow low.

2. a) Re-establish normal seal flow as soon as i 22 gpm MU-7-FS1 HIGH/ LOW c) RCP-B seal flow low.

cause is found.. Refer to OP-302.

1 3 gpm MU-7-FS2 d) RCP-C seal flow low.

1 3 gpm MU-7-FS3

.e) RCP-D seal flow low.

1 3 gpm MU-7-FS4 H-5-7

2. a) Indicated seal flow low.

1 3 gpm BWST VLV

1. a) HUT Low Low Level interlock defeatt3

1. a) No automatic line up of suction flow path in *B*

RSP INTERLOCK

2. a) None.

for running makeup pump or low MUT level.

Cab.

BYPASS

2. a) If switch not indicated by operators, then H-5-8 investigate cause of switch misposition.

AR-403

_Rev. 11 Page 6

,a:

,- g

~3

%)

U)

V;

.E'

(

s ANNUNCIATOR PANEL LOCATION PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 6

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUTO ACTION SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROUBLE NUMBER &

LOCATION SIM GEN B

1. a) EFIC CH. A or CH. B Main Steam Isolation

1. a) MSIV on affected OTSG closes.

MAIN STEAM ISO Actuation.

2. a) Refer to AP-460 (SGIA).

ACTUATE 0 b) Half trip on EFIC CH A or CH B.

b) Notify I&C of EFIC half trip (Refer to H-6-1 SP-146).

SIM GEN B

1. a) EFIC CH. A or CH. B Main Feed Isolation

1. a) Main f W Block valve closes.

FEEDWATER ISO Actuation.

b) LO Load FW Block valve closes.

ACTUATED b) Half trip on EFIC CH A or CH B.

c) SU Block valve closes.

d) FWP Suction valve closes.

2. a) Refer to AP-4SD (SGIA).

b) Notify I&C of EFIC half trip (Refer to

-H-6-2 SP-146).

EMERG FW

l. a) EFIC CH A or CH B EFW Actuation.

1. a) EFP-1 and 2 Start EFv-55. 56. 51. 58 ACTUATION b) Half trip on EFIC CH A or CH B.

Control OTSG Level.

2. a) Refer to AP-450 (EFA).

'b) Notify I&C of EFIC half trip (Refer to H-6-3 SP-1461.

H-6-4 H-6-5 EFIC

1. a) EFIC CH. A. B. C or D in Maintenance

1. a) Bypass of other EFIC or RPS channels IS BYPASS Bypass..

blocked.

b) RPS Ch. A. B. C or D in Ch. Bypass.

2. a) Return Bypass switches to normal position c) Any EFIC Test Switch in other than normal when not testing.

H-6-6 position.

EFIC

1. a) EFIC CH. A or 8, or CH. C or D Main Steam

1. a) Low Pressure isolation of OISG's IS SHUTDOWN

. Isolatten Actuation Bypassed.

blocked.

BYPASS

2. a) None.

2. a) Reset channel when OTSG pressure >-600 H-6-7 osi and increasino.

EFIC AH

1. a) AHF-S4A or S4B Low F low - control switch in 1. a) None.

10% of SYSTEM

' Norm after start.

2. a) Investigate.

design TROUBLE b) EFIC Room Temp High/ Low; flow c) Ef!C Room AHF S4A or S4B Duct tcmp high.

> 8S*F H-6-8 d) EFIC Room AHF S4A or S4B smoke.

1 6S*F l

AR-403 Rev. 12 Page 7

l

.; \\

,-x

,-- s..

.\\

l

(

)

(

l

%,/

v

%./

,?

ANNUNCIATOR PANEL LOCATION.

PSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 7

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUTO ACTION SETPOINT SENSING 2.

CONTROL ROOH INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROUBLE NUMBER &

LOCATION EF TANK

1. a) EF tank level 18 *8" (39,900 ga l).

1. a) None.

8*8" LEVEL

2. a) EF tank level indication.

2. a) Refer to AP-450 (EFA).

LOW-LOW H-7-1 EF PUMP 1

1. a) Control switch in " Normal Af ter Stop" and

1. a) Pump start on loss of both main FW pumps.

AUTO START auto start signal present.

b) Pump start on low level of both OTSG*s.

2. a) Red indicating Ilght on control switch.

2. a) Verify pump start.

H-7-2 b) Flow indication on emeroency flow meters.

EF PUMP 1

1. a) Alarms when EFP breaker is open with

1. a) None.

START breaker racked in and control switch is in

2. a) Verify that turbine-driven EFW pump is FAILURE the " Normal After Start" position.

running.

b) Switch in " Normal After Start" with b) Attempt.to start pump manually.

discharge pressure < 1100 psig.

c) Have Operator check breaker at ES bus.

2. a) Flow indication.

H-7-3 b) EFP-1 control switch lichts.

[F PUMP 1

1. a) Control switch in normal af ter start and

1. a) None.

TRIP brk open.

2. a) If required start steam driven pump.

SWITCHGEAR

2. a) Pump brk indicates open.

H-7-4 EF PUMP 1

1. a) Loss of OC control power, brk not fully

1. a) None.

OUT OF SERVICE racked in.

2. a) Rack in breaker.

SWITCHGEAR

2. a) Control switch indicating lites not on.

b) Close DC knife switch.

H-7-5 EF PUMP l-

1. a) Motor overcurrent.

1. a) Pump brk trips.

MOTOR

2. a) Motor brk open.

2. a) If required. start steam driven pump.

SWITCHGEAR OVERLOAD b) Place control switch in normal af ter stop.

H-7-6 c) Notify Electrical Supervisor.

H-7-7 H-7-8 AR-403 Rev 12 Page 8

~

g

( 8 p]

\\

.,)

.\\

'\\v)

,T v

ANNUNCIATOR PANEL LOCATION pSA-Z ANNUNCIATOR PANEL H

VERTICAL COLUMN 8

WINDOW TITLE 1.

INDICATED CONDITION 1.

AUTO ACTION SETPOINT SENSING 2.

CONTROL ROOM INDICATION WHICH VERIFY OR 2.

OPERATOR ACTION - VALID ALARM ELEMENT PINPOINT TROUBLE NUMBER &

LOCATION EF TANK

1. a) EF tank level high ; 37'2" (174.600 gal).

1. a) None.

37'2" LEVEL b) EF tank level low 1 34*1" (160.800 gal).

2. a) Check for proper nitrogen overpressure.

34*7" HIGH/ LOW

2. a) EF tank level indication.

b) Check for proper valve line up.

H-8-1 c) Fill / drain tank.

EF. PUMP 2

1. a) ASV-5 in " Auto" and 50 seconds after auto

1. a) Auto start on loss of both main FVP*s.

AUTO START start signal with discharge pressure b) Auto start on both OTSG low levels.

> 1100 psig.

2. a) Verify pump start.

b) ASV-204 in " Auto" and 50 seconds after auto start signal with discharge pressure

> 1100 psig.

H-8-2

2. a) Flow indication.

EF PUHP 2

1. a) /.SV-5 in " Auto" and 50 seconds after auto

1. a) None.

START start signal with discharge pressure

2. a) Check ASV-5 for full open and OTSG FAILURE 1100 psig.

pressure.

b) ASV-204 in " Auto" and 50 seconds after auto start signal with discharge pressure 1100 psig.

H-8-3

2. al Flow indication.

EF PUMP 2

1. a) ASV-50 closed.

1. a) None.

TRIP

2. a) ASV-50 indicates closed.

2. a) Notify NA0 to relatch and open ASV-50.

ASV-50 H-8-4 EF PUHF 2

1. a) MSV-55 or 56 f ully closed.

1. a) None.

.l OUT OF SERVICE b) ASV-5 or ASV-204 fully closed and

2. a) Insure valve lineup is normal for present auto open signal present for 5 seconds.

2. a) MSV-55 3nd MSV-56 position lights.

operating condition.

l H-8-5 b) ASV-5 and ASV-204 oosition liabts.

EMERG FW

l. a) EFV-3.

4, 7.'8 11, 14. 32. or 33 not

1. a) None.

VALVE-fully open..

2. a) IF valves required open and will not open.

NOT. FULL OPEN

2. a) Valves position indication.

THEN open manually A1D Initiate a work H-8-6 reauest.

H-8-7 H-8-8 AR-403 Rev. 12 Page 9

=

=

. =

ANNVNC'IATOR O...

PANEL LOCATION NOTES H-1-1 1.

Any one or more of the following monitors:

a) RM-G1 b) RM-G2 l

c) RM-G3 d)

RM-G4 e) RM-G5 f)

RM-G6 g)

RM-G7 h)

RM G8 i).RM-G9 j) RM-G10 k)

RM-Gil 1)

RM-G12 m) RM-G13 n) RM-G14 o) RM-G15 p) RM-G16 q)

RM-G17 i

r)

RM-G18 J

H-2-1 1.

Any one or more of the following monitors:

1 a)

RM-Al (PART) b)

RM-Al (GAS) 1 c)

RM-Al (IODINE) d) RM-A2 (PART) e)

RM-A2 (GAS).

f) RM-A2 (IODINE) g)

RM-A3 (GAS) h)

RM-A4 (GAS) i)

RM-A5 (GAS) j)

RM-A5 (IODINE) k)

RM-A6 (GAS) 1)

RM-A6 (IODINE) m)

RM-A7 (GAS) n) RM-A8 (GAS) o)

RM-All (GAS) p) RM-Al2 (GAS) q)

RM-A13 (GAS) r)

RM-A14 (GAS) s)

RM-A15 (GAS) 1 O

1 AR-403 Rev. 12 Page 10

rm ANNUNCIATOR d..

PANEL i

-LOCATION NOTES i

H 2 2.

Air flow to one or more of the following above normal or s 5 SCFM:

a)

RM-Al b) RM-A2 c)

RM A3 d)

RM-A4 e) RM-A5 f) RM-A6 g) RM A7 h) RM-A8

1) RM-A14 j) RM-AIS H-3-1 1.

Any one or more of the following monitors:

a)

RM-L1 b) RM-L2 c)

RM-L3 d) RM-L5 eO e)

RM-L6 V

f) RM-L7 i

l-1:

l l

O v

l (LAST PAGE) 1

.AR-403 Rev.'12 Page-11 L