ML19329E354
| ML19329E354 | |
| Person / Time | |
|---|---|
| Site: | Midland |
| Issue date: | 06/27/1978 |
| From: | James Keppler NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION III) |
| To: | Howell S CONSUMERS ENERGY CO. (FORMERLY CONSUMERS POWER CO.) |
| References | |
| NUDOCS 8006120663 | |
| Download: ML19329E354 (1) | |
Text
._.
~
~
COV~/.5..< u r..,..
.r Mk Docket No. 50-329 Docket No. 50-330 Consumers Power Company ATTN:
Mr. Stephen H. Howell Vice President 1945 West Parnall Road Jackson, MI 49201 Gentlemen:
Enclosed is IE Bulletin No. 78-10 which requires action by you with regard to your power reactor facilities with an operating license or a construction permit.
Should you have questions regarding this Bulletin or the actions required of you, please contact this office.
Sincarely, James G. Keppler Director
Enclosures:
1.
List of IE Bulletins Issued in 1978 cc w/encis:
W entral Piles Director, NRR/DPM
/
O1 e
Director, NRR/ DOR PDE Local PDE NSIC TIC Ronald Callen, Michigan Public Service Commission Dr. Wayne E. North Myron M. Cherry, Chicago orriCr >
RTIL sunw Aur > _KI Hei an/dal,
_ler p
DATED,__ 6-26-78 6-26-78 NRC Form 318A (R2IE) (5--76) NRCM 02040
- U. 5. GOVERNMENT PRINTING OFFICE: 1978-233-818
~
- "06 120 M 3 Q
N U. S. NUCLEAR REGULATORY COMMISSION OFFICE OF INSPECTION AND ENFORCEMENT REGION III i
June 27, 1978 IE Bulletin No. 78-10 BERGEN-PATERSON HYDRAULIC SHOCK SUPPRESSOR ACCLTJLATOR SPRING COILS Description of Circumstances:
During the conduct of hydraulic shock suppressor (snubber) functional testing and seal replacement programs at several licensed facilities, a number of broken accumulator spring coils have been found in early model Bergen-Paterson hydraulic snubbers. The attached extract from a Bergen-Paterson advisory letter, dated April 6, 1978, states that a broken accumulator spring alone would not render the snubber incapable of performing its design function; however, the broken spring could cause internal damage to the accumulator which could result in unit inoperability.
The subject snubbers are of the external pipe design with serial numbers 487,000 to 515,000 and F60,635 through F75,000. The accumulator springs in these snubbers are basically carbon steel and were coated with a petro-chemical rust preventative by the vendor. Despite this initial Protective coating, those springs found broken exhibited advanced stages of corrosion. The factors which caused the spring corrosion are undetermined.
Bergen-Paterson has recommended that corrosion susceptible accumulator i
spring coils be replaced with teflon coated or stainless steel coils during the next refueling shutdown.
Action to be Taken by Licensees:
4 For all power reactor facilities with an operating license or a construction permit:
1.
If you have received the enclosed Bergen-Paterson letter addressing the accumulator spring problem, and if you have these units installed or in ready spares at your facility, it 3
is requested that you describe what corrective action you have r'
3 taken or plan to take to assure that the operabilit of snubbers b
j in safety related systems is not impaired. It is a so requested b})' g00(0 that you describe the condition of any springs that were observed
\\
during the performance of the corrective action.
k i
'X i
y
..-y, w--
.~
IE Bulletin No. 78-10 June 27, 1978 2.
If you have not received the enclosed Bergen-Paterson letter, it
!.s requested that you describe what action you plan to take if the subject snubbers are installed or in ready spares at your facility to assure that the operability of snubbers in safety related systems is not impaired.
3.
If the snubbers are currently installed in safety related systems, it is requested that you identify their location in your response to this bulletin.
4.
Report in writing within 45 days for facilities with an operating license and within 60 days for facilities with a construction per=1t, your plan of action and schedule with regard to Items 1 and 2.
Reports should be submitted to the Director of the appro-priate NRC Regional Office and a copy should be forwarded to the NRC Office of Inspection and Enforcement, Division of Reactor Operations Inspection, Washington D. C.
20555.
Approved by GAO, B180225 (R0072); clearance expires 7-31-80.
Approval vas given under a blanket clearance specifically for identified generic problems.
Attachment:
Extract from Bergen-Paterson letter dated April 6, 1978
-s Attachment Extract frem Bergen-Paterson Advisory Letter SUBJECT : B/P Hydraulic Snubbers
)
HSSA Accumulator Spring Advisory Letter
)
Gentlemen:
Bergen-Paterson advises that broken accumulator spring coils have been found in a number of early model hydraulic snubbers at the time when units were being dissembled for seal replacement purposes. The early models noted are identified as being the external pipe design having serial numbers between 487,000 and 515,000 and F60,635 through F75,000.
These units were initially furnished with music wire or chrome silicone spring material both coated with a rust preventative. All later external pipe design units were initially furnished with springs having the same material as noted above; however, all coils were teflon coated. Our current model units are furnished with stainless steel coils. Both the teflon coated and stainless coils have been found to give satisfactory service.
It is specifically pointed out that a unit remains ~!unctional even with a broken spring; however, the possibility does ex1. that the debris from a broken spring coil could in fact cause damage to thm Accumulator Piston U-Cup Seal resulting in possible leakage of fluid. The remote possibility for the Accumulator Piston to become jammed in the tube also exists although, however, this has not been experienced.
Bergen-Paterson has issued this advisement to make users aware of the Possibility of broken accumulator springs and recommends that units having uncoated coils be refitted with either teflon coated or stainless steel coils at the next refueling shutdown.
Very truly yours, BERGEN-PATERSON PIPESUPPORT CORP.
Attachment I Page 1 of 1 l
-e.
,,_,.w
-m w
=
N IE Bulletin No. 78-10 June 27, 1978 LISTING OF IE BULLETINS ISSUED IN 1978 Bulletin Subject Data Issued Issued To No.
78-01 Flammable Contact -
1/16/78 All Power Reactor Arm Retainers in G.E.
Facilities with an CR120A Relays OL or CP 78-02 Terminal Block 1/30/78 All Power Reactor Qualification Facilities with an OL or CP 78-03 Potential Explosive 2/8/78 All BWR Power Gas Mixture Accumula-Reactor Facilitie=
tions Associated with with an OL or CP BWR Offgas System Operations 78-04 Environmental Quali-2/21/78 All Power Reactor fication of Cartain Facilities with an Stem Mounted Limit OL or CP Switches Inside Reactor Containment 78-05 Malfunctioning of 4/14/78 All Power Reactor Circuit Breaker Facilities with an Auxiliary Contact OL or CP Mechanism-General Model CR105X 78-06 Defective Cutler-5/31/78 All Power Reactor Hammer, Type M Relays Facilities with an With DC Coils OL or CP Page 1 of 2 t
.-.y
. ~. -.
h.
IE Bulletin No. 78-10 June 27, 1978 LISTING OF BULLETINS ISSUED IN 1978 Bulletin Subject Date Issued Issued To No.
78-07 Proteceton afforded 6/12/78 All Power Reactor Research Reactors with an OL, all Fuel Cycle Facilities with an OL, and all Priority 1 Material Licensees 78-08 Radiation Levels from 6/12/78 All Power and Fuel Element Transfer Research Reactor l
Tubes Facilities with a Fuel Element transfer tube and an OL.
78-09 BWR Drywell Leakage 6/14/78 All BWR Power Paths Associated with Reactor Facilities Inadequate Drywell with an OL or CP Closures Page 2 of 2
__