ML18171A110
| ML18171A110 | |
| Person / Time | |
|---|---|
| Site: | 07109287 |
| Issue date: | 06/19/2018 |
| From: | John Mckirgan Spent Fuel Licensing Branch |
| To: | Noss P Orano Federal Services |
| Lingam S | |
| Shared Package | |
| ML18171A109 | List: |
| References | |
| EPID L-2018-LLA-0155 | |
| Download: ML18171A110 (3) | |
Text
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
- 1. a. CERTIFICATE NUMBER b. REVISION NUMBER c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9287 6 71-9287 USA/9287/B(U)-85 1 OF 3
- 2. PREAMBLE
- a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, Packaging and Transportation of Radioactive Material.
- b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
- 3. THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION
- a. ISSUED TO (Name and Address) b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION Orano Federal Services, LLC Packaging Technology, Inc., application dated 505 S. 336th Street, Suite 400 November 18, 1998, as supplemented.
Federal Way, WA 98003
- 4. CONDITIONS This certificate is conditional upon fulfilling the requirements of 10 CFR Part 71, as applicable, and the conditions specified below.
5.
(a) Packaging (1) Model No.: Eagle (2) Description A stainless steel, lead shielded shipping cask for special form cobalt-60 sealed sources. The package consists of a cylindrical cask body with closure lid, and removable toroidal impact limiters, and a basket that carries and positions the cobolt-60 sealed source capsules. The packaging is constructed primarily of ASTM Type 304 stainless steel. The package is designed to transport up to 330,000 curies of cobalt-60.
The outside diameter of the cask body is approximately 37-11/16 inches. The diameter of the inner cavity is approximately 10-3/4 inches. The stainless steel inner shell has a minimum thickness of 1 inch and the stainless steel outer shell is 1 inch thick. The region between the two shells is filled with lead shielding. The closure lid and cask bottom end each consist of two stainless steel plates with lead between the two plates. The lead shielding thickness is approximately 10-3/8 inches on the side, 14-3/8 inches in the closure lid, and 11-7/8 inches on the cask bottom. The closure lid is secured by 12, 3/4-inch bolts.
The closure lid is equipped with a Viton O-ring seal. The lid has a drain port and a vent port, and the cask body has a drain port. Each port is closed by a plug.
A double stainless steel thermal radiation shield is provided on the outside of the cask body in the region between the two impact limiters. The inner thermal shield is about 3/4-inches
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
- 1. a. CERTIFICATE NUMBER b. REVISION NUMBER c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9287 6 71-9287 USA/9287/B(U)-85 2 OF 3 5.(a) (2) Description (continued) thick and is radially separated from the cask outer shell by 12 gauge spacers at each end.
The outer shield is a sheet of 10 gauge material separated from the inner shield by a spiral wrap of 12 gauge wire.
The top and bottom impact limiters are toroidal stainless steel shells. They are attached to either end of the cask body using 12, 1-inch diameter ball-lock pins orientated radially around the cask body. One pin on each limiter is installed with a lockwire to provide a tamper-indicating device.
The cask lifting attachments thread into the upper cask body. The cask lid is also equipped with removable lid-lifting attachments. The cask rests on a steel pallet and is held down to the pallet by means of a steel frame placed on the top impact limiter. This steel frame is used to tie the cask to the conveyance. The maximum weight of the package, including contents is 20,000 lbs.
The approximate dimension and weights of the package are as follows:
Cask Body Outer Diameter 37-11/16 inches Cask Body Height 49-7/8 inches Cask Cavity Inner Diameter 10-3/4 inches Cask Cavity Inner Height 19 inches Lead Shield Sidewall Thickness 10-3/8 inches Overall Package Dimension Diameter at Impact Limiters 60 inches Diameter at Body 37-11/16 inches Height with Impact Limiters 76 inches Maximum Contents Weight 50 pounds Maximum Package Weight (Including Contents) 20,000 pounds (3) Drawings The packaging is constructed and assembled in accordance with Packaging Technology, Incorporated, Drawing No. 98003-SAR, Rev.1, Sheets 1 through 8.
(b) Contents (1) Type and form of material Cobalt-60 as sealed sources that meet the requirements of special form radioactive material.
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
- 1. a. CERTIFICATE NUMBER b. REVISION NUMBER c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9287 6 71-9287 USA/9287/B(U)-85 3 OF 3 5.(b) (2) Maximum quantity of material per package:
12,210 terabecquerels (330,000 curies).
Not to exceed 680.8 terabecquerels (18,400 curies) per special form source.
- 6. In addition to the requirements of Subpart G of 10 CFR Part 71:
(a) The package shall be prepared for shipment and operated in accordance with the Operating Procedures in Chapter 7.0 of the application, as supplemented.
(b) Each packaging must meet the Acceptance Tests and Maintenance Program of Chapter 8.0 of the application, as supplemented.
- 7. The package authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR §71.17, provided the fabrication of the package was satisfactorily completed by December 31, 2006.
- 8. Expiration date: January 31, 2020.
REFERENCES Packaging Technology, Inc., application dated November 18, 1998.
Supplements dated: August 20, 1999; November 29, 2004; November 26, 2007; November 12, 2009; October 31, 2011; and November 20, 2014.
Orano Federal Services LLC application dated May 15, 2018.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION
/RA/
John McKirgan, Chief Spent Fuel Licensing Branch Division of Spent Fuel Management Office of Nuclear Material Safety and Safeguards Date: 6/19/2018