ML17304A195

Inservice Insp Summary Rept,Palo Verde Nuclear Generating Station,Inservice Insp Rept First Refueling

ML17304A195
Person / Time
Site:	Palo Verde
Issue date:	06/01/1988
From:	Andersen M, Hansen D, Morrow A ARIZONA PUBLIC SERVICE CO. (FORMERLY ARIZONA NUCLEAR
To:
Shared Package
ML17304A192	List: ML17304A191 ML17304A195
References
NUDOCS 8806130377
Download: ML17304A195 (161)

Text

~

~

Arizona Nuclear Power Project Inservice Inspection Summary Report j

PVNGS. UNIT 1 INSERVICE INSPECTION REPORT FIRST REFtJELING 8806i30377 '880607-PDR ADQCK 05000528 9

DCD

PVNGS UNIT 1 INSERVICE INSPECTION REPORT FIRST REFUELING

PVNGS UNIT l INSERVICE INSPECTION REPORT FIRST REFUIKING PALO VERDE NUCLEAR GENERATING STATION ARIZONA PUBLIC SERVICE, et al P. 0.

Box 53999

Phoenix, AZ 85072 PVNGS 4,Miles South Nintersburg, AZ 85343 Prepared By:

Date:

4 l g'5'eviewed By:

Date:

Approved By:

Date:

Commercial Service Date:

1-28-86 Report Date:

6 1 88

L I

0

INDEX 1.0

SUMMARY

2.0 EXAMINATION RESULTS 3.0 EXAMINATIONTECHNIQUES 4.0 ACCESSIBILITY 5.0 PERSONNEL 6.0 EQUIPMENT AND MATERIALS 7.0 REPAIRS AND REPLACEMENTS APPENDIX A INSERVICE INSPECTION

SUMMARY

REPORT APPENDIX B INSERVICE INSPECTION CODE LIMITATIONS APPENDIX C FORM NIS-1

L l

PVNGS UNIT 1 INSERVICE INSPECTION REPORT FIRST REFUELING

1. 0

SUMMARY

This report contains a summary of the First Refueling Outage Inservice Inspection examinations for the Palo Verde Nuclear Generating Station Unit 1.

The examinations were performed by ANPP and Sonic Systems personnel, between 1-28-86 and 3-10-88.

Appendix A summarizes the items examined and the associated report number.

2.0 EXAMINATIONRESULTS Some reject data sheets were written during the refueling outage.

All of the discrepancies were corrected by using work orders.

Listed below are the rejected items:

ZONE ITEM DISCREPANCY 3,4 5

25 47 51

'60 60 73 74 74 74 83 AFF-131 EWF-202 Manway studs

'Manway.studs SI-156-H-7 47-24 51-51 60-7 60-8 SI-123-H-6 SI-70-H-10 SI-70-H-13 SI-70-H-16 SI-119-H-9 AF-13-H-16 EW-54-H-9 Galled threads Galled threads Bent load pin snap ring Linear indications in 'L-seam Linear indication Linear indication

. Linear indication Loose locknut

. Loose bolting

'oose bolting Loose bolting

~ Structural weld length too short Missing cotter pin Loose lecknut The Items in Zones 51 and 60 were repaired by blending out the indications.

No minimum wall violations occurred during this process.

The manway studs in Zones 3,',

and 5 were all damaged during removal and were replaced with new studs and nuts.

In addition to the required examination, nine visual preservice inspections were performed on replacement snubbers.

IC 1

Cl

3. 0 EXAMINATIONTHClPIQUES The three types of examinations utilized to perform the Inservice Examina-tions along with the actual nondestructive examination technique, are identified in the legend below:

VT-VISUAL VT-1 GENERAL CONDITION VT-2 LEAKAGE VT-3 STRUCTURAL CONDITION VT-4 OPERABILITY S-SURFACE LIQUID PENETRANT MAGNETIC PARTICLE VOL-VOLUMETRIC UT ULTRASONIC All of the nondestructive examinations were performed using specific techniques and procedures that are indicated in ASME Section XI, or alternative examinations that are demonstrated to be equivalent or superior to those identified.

4.0 ACCESSIBILITY All items were examined to the extent practical.

Any code limitations encountered during the examinations are documented in Appendix B.

5.0 PERSONNEL ANPP and Sonic Systems International personnel performed the Inservice Nondestructive examinations.

All personnel were certified in.accordance with programs written to comply with the applicable requirements of ASME Section XI.

6. 0 EQUIPMENT AND MATERIALS The equipment and materials utilized were certified t'o the requirements.

of ASME Section'I.

Copies of all certifications are main'tained.on file.

7.0 REPAIRS AND REPLACEMENTS All repairs and replacements were performed to ASME Section XI require-

'ents.

The applicable records and reports for the specific repair or replacement are maintained on file.

APPENDIX A

INSERVICE INSPECTION

SUMMARY

REPORT

INDEX 0

TABLE EXAM CATEGORY l-l B-A, 1-2 B-B, Pressure retaining welds in reactor vessel Pressure retaining welds in vessels other than reactor vessels 1-3 B-D, Full penetration welds of nozzles in vessels Inspec-tion Program B

1-4.

B-E, Pressure retaining partial penetration welds in vessels 1-5 B-F, 1-6 B-G-1, Pressure retaining dissimilar metal welds Pressure retaining bolting, greater than 2 in. in dia-meter

'-7 B-G-2, Pressure retaining bolting, 2 in. and less in dia-meter 1-8 1-9 B-H, B-J, Integral attachments for vessels Pressure retaining welds in piping 1-10 B-K-1, Integral attachments for piping, pumps and valves 1-12 B-L-1 8 B-M-1, B-L-2 8 B-M-2, Pressure retaining welds in pump casings and valve bodies and Pump casings and valve bodies 1-13 1-14 1-15 B-N-1, B-N-2, B-N-3, B-O, B-P, Interior of reactor vessel Integrally welded core support structures and interior attachments to reactor vessels Removable 'core support structures Pressure retaining welds in control rod housings All pressure retaining components 1-16 B-Q, Steam generator tubing 1-IVF F-A, F-B, F-C, Plate and shell type supports Linear type supports Component standard support 1-RCP N/A, Reactor coolant pump flywheel examinations Reg.

Guide 1.14

k I

Cl

INDEX TABLE EXAM CATEGORY 2-1 2-2 2-3 C-A, C-B, C-C, Pressure retaining welds in pressure vessels Pressure retaining nozzle welds in vessels Integral attachments for vessels,

piping, pumps, and valves 2-4 C-D, Pressure retaining bolting exceeding 2 in. in dia-meter 2-5 2-6 2-7 C-F, C-G, C-H, Pressure retaining welds in piping Pressure retaining welds in pumps and valves All pressure retaining components 2-IWF F-A, F-B, F-C, Plate'nd shell type -supports Linear type supports Component standards supports 2-CFR 2-AHE

RHR, ECCS, and CHR piping Augmented high'nergy piping

PALO VERDE NUCLEAR GENERATING STAT(ON INSERVICE INSPECTION SVMMARYREPORT TABLE:

PAGE

'F ASME ITEM NUMBER B 100 REOUIREO INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT EXAM CATPGORT B-A PRESSURE RETAINING WELDS IN REACTOR VESSEL ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS ANO RELIEF REOUESTS 110ill SHELL WELDS CIRCUMPEREHT'IAL 1-Reactor Vessel One Two.

Three 112 LOHGITUDItIAL 1-Reactor Vessel One

'wo

=Three 0

0

~

9 120 121 HEAD WEI.DS CIRCUMPERENTIAL 122 MERIDIONAL 1-Reactor Vessel Bottora Head 2-Closure Head One T'wc Three One Two Three 33X 33X 34X 2-4 87-1603,4>5 87-1598 130 SHELL-TO-PLAtIGE WELD 1-Reactor Vessel One Two Thre'e 50X 0

100X 140 HEAD-TO-PLAHGE WELD 2-Closure Head One Two Three 33X 33X 34X 2-1'7-1603,4>5 87 1598 150

.')51 REPAIR WELDS BELTLIHE REGION pv>Is<revs>v i aa g~-45fgE OZ$'f~

C I

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-2 ASME ITEM NUMBER B200 ZONE/COMPONENT OR SYSTEM ETAH CATcGORT B B.

PRESSURE RETAINING UELDS IN VESSELS OTHER THAN REACTOR VESSELS REQUIRED INSPECTION EXAMINATION PEAIOO AMOUNT ITEM IOENTIFICATION Volumetric Surlace EXAMINATIONREPOAT NUMBER Vlaual REMARKS ANO BELIEF AEQUESTS 210 PRESSURIZER SHETr TO HEAD FIELDS 211 212 CIRCUMFERENTIAL AND

• LONGITUDINAL 220 221 222 5-Pressurizer Shell co Bocton Head 5-Pressurizer Shell to Top Head HEAD WELDS CIRCUMPERENTIAL MERIDIONAL One Trro Three One Trro Three 332 33I

~ 342 33I 33X 342 b

230 231 STEAM GENERATORS HEAD NELDS CIRCUHPERENT'IAL 3-Stean Generacor 1

One Tuo Three 4-Scean Generator 2

One Trro Three 232 HERIDIONAL I

3-Stean Generator 1

One Trro Three 4-Stean Generator 2

One Trro Three '

5 1

pvarsE)rcr/An 1.aa

PALO VERDE NUCLEAR GENERATING STATION A N P 1S INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-2 2

QF 2

ASME ITEM NUMBER 240 ZONE/COMPONENT OR SYSTEM TUBESHEFT TO HEAD 3-Stean Generaror 1

INSPECTION PERIOD One Two Three REQUIRED EXAMINATION AMOUNT 1

0 I

ITEM IDENTIFICATION Velumelrlc Surlace EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 4-Steatr Generator 2

One Two Th ee 0

1 1

250 251 252 253 260 HEAT EXCHARGERS HEAD QELDS CIRCUMEEREIITIAL MERIDIONAL LONGITUDINAL

-TUBESHEET-TO-SHELL 261 TUBESHEET-TO-SHELL PV4lrLO1CURev r aa

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE; PAGE 1-3 1

OF 2

ASME ITEM NUMBER B300 ZONE/COMPONENT OR SYSTEM E'IAM. CATEGORv B D.

FULL PENETRATION WELDS OF NOZZLES IN VESSELS-INSPECTION PROGRAM B

REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION VOIURIetTIc Bur!ace EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 390 3 100 REACTOR VESSEL NOZZLE-TO-VESSEL WELDS AND HOZZLE INSIDE RADIUS SECTIOH 1-Reactor Vessel One Tuo Three 3110 S

3120 PRESSURIZER NOZZLE-TO-VESSEL WELDS AHD NOZZLE INSIDE RADIUS SECTION 5-Pressurizer One Too Three 22' 3130 3140 STEAM GENERATORS NOZZLE-TO-VESSEL WELDS AND NOZZLE INSIDE RADIUS SECTION I

I 3-Stean Generator 1

I One Two Three 4-Stean Generator 2

One Too Three PVA1947CURvv 1 Sa

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE l-3 2

OF 2

ASME ITEM NUMBER 3)50 I

3)60 ZONE/COMPONENT OR SYSTEM BEAT EXCHANGERS NOZZLE-TO-VESSEL NELDS AND NOZZLE INSIDE RADIUS SECTION INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumefrfc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS pv41947cu Asvr.sa

l

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE PAGE 1-4 1

QF ASME ITEM NUMBER B400 ZONE/COMPONENT OR SYSTEM EXAM CATEGORY B-E PRESSURE RETAININC I PARTIAL PENETRATION WELDS IN VESSELS REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volurrrslrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 410 411 412 PARTIAL PENETRATION WELDS VESSEL NOZZLES CONTROL ROD DRIVE

'OZZLES Reactor Vessel Closure Head One Trro Three 8

,8 9

INSTRUMENT NOZZLES Reactor Vessel One Trro Three 420 PRESSURIZER HEATER PENETRATION

'WELDS One Trro Three PVAI941 CU Rrv. 14b

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORY TABLE:

PAGE 1-5 OF ASME ITEM NUMBER B500 ZONE/COMPONENT OR SYSTEM EXAM CATEGORY B-F PRESSURE RETAINING DISSIMILAR METAL WELDS INSPECTION PERIOD REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VDIumeITlc Surlace EXAMINATIONREPORT NUMBER Vtsual REMARKS AND RELIEF REOUESTS 510 520 REACTOR VESSEL NOMINAL PIPE SIZE~ 4 IH. NOZZLE TO SAFE END BUTT WELDS HOMINAL PIPE SIZE( 4 IH. NOZZLE TO SAFE END BUTT WELDS 530 NOZZLE TO SAFE END SOCKET WELDS 540 PRESSURIZER NOMINAL PIPE SIZE-4 IH. NOZZLE TO SAFE END BUTT WELDS 20-Surge 29-Spray*

31-Saferfes (4)

One Tuo Three 31-5-29 87-1584 87-1526 550 560 NOMINAL PIPE SIZE ~4 IH-NOZZLE TO SAFE END BUTT WELDS NOZZLE TO SAFE END SOCKET WELDS 570 580 STEAM GEHERATOR NOMINAL PIPE SIZE 4

IN. NOZZLE TO SAFE EtID BUTT WELDS HOMINAL PIPE SIZE ~4 Itt. NOZZLE TO SAFE EtID BUTT WELDS PVC194TCU aev 1.aa

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTIGN

SUMMARY

REPGRT TABLE:

PAGE 1-5 OF ASME ITEM NUMBER 590 5100 5110 INSPECTION ZONE/COMPONENT OR SYSTEM PERIOD tIOZZLE TO SAFE END SOCKET WELDS HEAT EKCHAHGERS HOMIHAL PIPE SIZE-4 IN'OZZLE TO SAFE EIID BUTT QELDS NOMINAL PIPE SIZE'~ 4 IN. HOZZLE TO SAFE EtlD BUTT IIELDS REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Votamet/Ic SUflece EXAMINATIONREPORT NUMBER Vleae I REMARKS AND RELIEF REQUESTS 5120 NOZ2LE TO SAFE END

. SOCKET FIELDS 5130 PIPING HOMINAL PIPE SIZE~ 4 IN. DISSIMILAR METAL BUTT QELDS 5140 20-PZR Sarge 21-SD Cooling 1

22-SD Cooling 2

23-Safecy Inj 1A 24-Safery Inj 1B 25-Safecy Inj 2A 26-Safery Inj 2B HOMIHAL PIPE SIZE~ 4 IH. DISSIMILAR METAL BUTT UELDS 27-PZR Spray 1A 28-PZR Spray 1B 32-Drain 1A 33-Drain 1B 34-Drain 2A 36-Lerdown 37-Charging Three One Two One Two Three Three One Two One Two Three

'hree

Three, I

32-8-18 87-1546 5150 DISSIMILAR METAL SOCKET UELDS pvete-Olcv Rev i ee

jl 0

PALO VERDE NDDLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-6 1

3 OF ASME ITEM NUMBER B600 ZONE/COMPONENT OR SYSTEM EXAM CATEGORy B-G-)

PRESSURE RETAINING I

BOLTING GREATER THAN 2 IN. IN DIAMETER INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volume!TIc Bur/see EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 610 REACTOR VESSEL CLOSURE HEAD NUTS 620 2-Reactor Vessel CLOSURE STUDS IN PLACE One

'uo Three 18 18 18 630 CLOSURE STUDS WHEN REMOVED 2-Reactor Vessel One Tuo Three 18 18 18 640 THREADS IN FLANGE 1-Reactor Vessel One Tao Three 18 18 18 650 660 670 680 CLOSURE WASHERS BUSHINGS 1-Reactor Vessel PRESSURIZER BOLTS AND STVDS FLANGE SURFACE WHEN CONNECTION DISAS-SEMBLED NUTS BUSHINGS AND WASHERS One Tuo Three 18 18 18 PYA1947CU 11ev. 1.SS

I

PALO VERDE NUCLEAR GENERATING ETATIDN INSERVICE INSPECTION

SUMMARY

REPORT TABLE'AGE 1-6 2

OF 3

ASME ITEM NUMBER 690 I 6100 6110 ZONE/COMPONENT OR SYSTEM STEAM GENERATORS BOLTS AND STUDS I

ELANGE SURFACE

'WHEN CONtIECTION DISAS-SEMBLED NUTS BUSHINGS AND WASHERS INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Vlsuet REMARKS AND RELIEF REQUESTS 6120 6130 6140 HEAT EECHANGERS BOLTS AND STUDS PLANGE SUREACE W

EN CONtIECTION DISAS-SEMBLED NUTS BUSH'INGS AND WASHERS 6150 6160 6170 PIPING BOLTS AND STUDS FLANGE SURFACE

'WHEN CONNECTION DISAS-SEMBLED NUTS BUSHINGS AtID WASHERS 6180 PUMPS BOLTS AND STUDS 16-Reactor Coolant Pump 1A Ona T'Mo Three 5

5 6

16 87-1640 87-1633 87-1632 17-Reactor Coolant Pump 1B One Tuo Three 86-185 PSE 87-1641 86-186 PSE 87-1619 i34 87-1618i1635 18-Pump 2A One Tuo I

Three 18 87-lo42 87-1613 87-1614 19-Reactor Coolant Pump 2B One Tuo Three 19 87-1643 87-1616 87-1617 pvlrs4r GU Aev uee

PALO VERDE NUCLEAR GENERATING STATION

~

7U 7

7 INSERVICE INSPECTION

SUMMARY

REPQR'll'ABLE:

PAGE 1-6 3

OF 3

ASME ITEM NUMBER 6190 2ONEICOMPONENT OR SYSTEM PLAIIGE SURFACE QHEN CONHECTION DISSAS-I SEMBL D INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Yolurnefrfc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 16, 17, 18 and 19-Re ac tor Coo lant Punps 1A,1Bv2A 2B One TNO Three 6200 NUTS BUSHINGS AND WASHERS 16-Reactor Coolant Punp 1A One TNO Three 55.

6 16 87-1539 17-Reactor Coolant Punp 1B One TNO Three 5

5 6

17 87-1540 18-Reactor Coolant Punp 2A One TNO Three 5

5 6

18 87-1541 19-Reactor Coolant Punp 2B One TNO Three 19 87-1542 6210 6220 6230 VALVES BOLTS AHD STUDS PLANGE SURFACE IIHEN CONNECTION DISAS-SEMBLED HUTS BUSHINGS AHD WASHERS PVAIILOrCUAsv Naa

PALO VERDE NUCLEAR GENERATING STATION A N P I'NSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-7 1

OF 5

ASME ITEM NUMBER ZONEICOMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VDIUINSITIc Surlsce EXAMINATIONREPORT NUMBER VIEusl REMARKS AND RELIEF REQUESTS B700 I

EXAM. CATEGORY B-G-2 I

PRESSURE RETAINING BOLTING 2 IN.

AND LESS IN DIAMETER 710 720 REACTOR VESSEL BOLTS STUDS AHD HUTS PRESSURIZER BOLTS STUDS AHD HUTS 5-PZR Manway One Two Three 20

~ 20 20 730 STEAM GENERATORS BOLTS STUDS AHD NUTS 3-Stean Generator 1

Cold Leg and Hot Leg Manways One Two Three 40 40 40 87-1594 87-1592,1611'40 4-Stean Generator 2

Cold LeS and Hot Leg Manways HEAT EXCHAHGERS One Two Three 40

~ 40 40 87-1595 87-1593 PV41SOTCU Rev 1 Sd

l i

~

I

PALO VERDE NUCLEAR GENERATING STATION A N P ls INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE~ OF~

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD RED UIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumslrlc Surlsce EXAMINATIONREPORT NUMBER Vlsusl REMARKS AND RELIEF REOUESTS I750 PjPjNC I BOLTS STUDS AND NUTS 31-PZR Safeties 37-Charging Line One Trro Three One Two Three 10' 1-PSV-200 1-PSV-201 1-PSV-202 1-PSV-203 7-V435 7-1590 7-1590 7-1590 7-1590>1 7-1589 7-1637,9 7-1589 7-1589 7-1589 7-1576 PVE1941 CU IIEE. 14b

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-7 OF ASME ITEM NUMBER I 760 REQUIRED INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT PUMPS BOLTS STUDS AND NUTS ITEM IDENTIFICATION Volumetric Surfsce EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 770 16-Reactor Coolant Puap 1A Seal Cover Bolting 17-Reactor Coolant Puap 1B Seal Covez Bolting 18-Reactor Coolant Puap 2A Seal Cover Bolting 19-Reactor Coolant Puap 28 Seal Cover Bolting VALVES BOLTS STUDS AND NUTS One Trro Three One Tsro Three One Two Three One Trro Three 5

5 6

5 5

6 5

5 6

16 17 18 19 87-1539 87-)540 87-1541 87-1542 21-SD Cooling Loop 1

One Trro Three 21-V653 87-1601 22-SD Cooling Loop 2

One Trro Three 1

.1 0

23-SI Loop 1A One Trro Threes 24-SI Loop 1B I

One Trro.

Three 24-V543 87-1467 25-SI Loop 2A One Tsro Three 1

1 2

25-V540 87-1469 Ivvsleer CU RSV. USS

I IJ

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION SUNlMARYREPORT TABLE:

PAGE 1-7 QF 5

ASME ITEM NUMBER 770 INSPECTION ZONE/COMPONENT OR SYSTEM PERIOD CONTTNVED REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumel>lc SUTIEce EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS I

26-SI Loop 2B One Two

Three, 26-V 2>I5 87-1472 27-PZR Spray Loop 1A One Two Three 28-PZR Spray Loop 1B One Two Three 28-V241>V242 87-1575 29 Conbined PZR Spray

. One Two Three 31-PZR Safeties Ons Two Three PSV-203 1

1.

2 31-PSV-200 87-1638,9 32-Drain Line Loop 1A One Two Three 32 V234,V334 87-1543 Drain Ll.ne Loop 1B One Two Three 34-Drain Line Loop 2A One Two Three 35-Drain Line Loop 2B One Two Three 36-Letdown Line 37-Charging Line One Two Three One Two Three:

~

I 37-V240 87-1602 PVeleeJCU 4ee 1 C4

I

PALO VERDE NUCLEAR GENERATING STATION A N P ls INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-7 OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumelrlc Surlece EXAMINATIONREPORT NUMBER VIS US I REMARKS AND RELIEF REQUESTS 770 CONTINUED 38-Loop 1 Drain One Two Three 39-HPSI Supply Loop 1

One Two Thre'e 40-HPSI Supply Loop 2

One Two Three 780 CRD HOUSINGS BOLTS STUDS AND NUTS 2-RVLMS Locations One Two Three 1

0 1

2-21(92) 2-21(96) 87-1612 87-1610 PVAI9-01CU RSV l.bd

0

PALO VERDE NUCLEAR.GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-8 QF I

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Surlace EXAMINATIONREPORT NUMBER Vlaual REMARKS AND RELIEF REQUESTS IS800 EXAM CATEGORY B-H INTEGRAL ATTACH-MENTS POR VESSELS 810 REACTOR VESSEL ItITEGRALLY WELDED ATTACHMENTS 820 PRESSURIZER INTEGRAI.I.Y WELDED ATTACHMENTS 830 5-Pressurirer STEAM GEtlERATORS INTEGRALLY WELDED ATTACHMENTS One Two Three 332 332 34X 3-Stean Generator l One Tuo Three 332 342 4-Stean Generator 2

One Tuo Ttl ee 332 840 HEAT EXCHANGERS IHTEGRALLY WELDED ATTACHMENTS PVAI94rtuaev I aa

PALO VERDE NUCLEAR GENERATING STATION A w I 1

INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-9 1

OF 5

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VDIUDleITIC Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS IB900 EXAM CATEGORY B-J PRESSURE RETAININC IIELDS IN PIPINC 910 NOMINAL PIPE SIZE@ 4

. 911 912 CIRCUMFERENTIAL AND

• LONCITUDINALMELDS 6-RCS Prinery Piping One

.Two Three 7

6 13 "The lessor of 12u or 1

pipe Oia length from scheduled circ IIIeld intersection 20-PZR Surge Line One Tuo Three 21-SD Cooling Loop 1

One Tuo Three 2

2.

2 22-SD Cooling Loop 2

23-SI Loop 1A 24-SI Loop 18 One Two Three One Two Three One

~

Til0 Three 2

2 3

~

I Pvcle OTCURov 1 Sb

4

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-9 OF AS ME ITEM NUMBER ZONEI OMPONENT OR SYSTEM INSPECTION PERIOD REOUIRED EXAMINATION

.AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 911 912 CONTINUED 25-SI Loop 2A One Two'hree 25-26 25-27 87-1509 87-1510 87-1468 87-1468 26-SI Loop 2B One Two Three 26-8 26-9 26-11 87-1581 87-1558'6-194 PSE 87-1485 87-1485 28 S 29-PZR Spray Loop 1B and Conbined One Two Three 29-10 29-11 87-1582.

87-1583 87-1531 87-1531 31-PZR Safeties One Two Three 31-1 87-1585 87-1525 920 36-Letdown Line Delay Coil NOMINAL PIPE SIZE> 4 IN.

One Two Three 1

0 921 922 CIRCUMFERENTIAL AtlD

• LONGITUDIIIAL'FIELDS 27-PZR Spray Loop 1A One Two Three "The lessor of 12u or 1

pipe Oia length from scheduled circ weld intersection PVAISOTCUAsv 1.SS

~ I

PALO VERDE NUCLEAR GENERATING STATION A N P r INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-9 OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM AEQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumdlrlc Sufldcd EXAMINATIONREPOAT NUMBEA Visual REMARKS AND RELIEF REQUESTS 921 922 CONTINUED 28-PZR Spray Loop 1B One Two Three 28-31 28-32 28-39 28-40 87-1552 87-1552 87-1574 87-1574 30-Aux PZR Spray One Two Three 30-13130-7 87-1535 32-Drain Line Loop 1A One Two Three 32-1,32-2 87-1546 33-Drain Line Loop 1B 34-Drain Line Loop 2A One Two Three One Two Three 0

1 1

0 20-35-Drain Line Loop 2B One Two Thrde 0

0 2

36-Lerdown Line One 5

36-28, 36-35 36-8) 36-9 87-1609 87-1580 Two I 6

Three 7

37-Charging Line One Two Three 37-41, 37-42 37-45) 37-46 37-47 87-1536 PVA)94TCUR)v ) Sd

I I

PALO VERDE NUCLEAR GENERATING STATION A PIf P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-9 4

OF AS ME ITEM NUMBER ZONEICDMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volurnefrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 921 922 CONTINUED 38-Drain Line Loop 1

One Two Three 39-HPSI Supply Loop 1

One Two Three 2

'3 4

39-1> 39-5 87-1488 40-HPSI Supply Loop 2

One Two Three 930 931 BRANCH PIPE CONNEC-TION IIELDS NOMINAL PIPE SIZE 4

IN.

6-RCS Prinary Piping Three One Three Two Thre'e 00.

1 1

1 1

932 NOMINAL PIPE SIZE P

4 IN.

6-RCS Prinary Piping One Two Three 0

0 0

0 1

1 6-8-17 87-1559 PVAI947CURev r da

Cl

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION SUlVIMARYREPORT TABLE'AGE 1-9 5

5 ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 21-SD Cooling Loop One Two Three 22-SD Cooling Loop 2

One Two Three 940 36-Lerrlown Line SOCKET IIELDS One Two Three 30-ADX PZR Spray One Tlro Three 32-Drain Line Loop lA One Two Three 1

0 0

32-6 87-1546 33-Dra.n Line Loop 1B One Two Three 01' 34-Drain Ll,ne Loop 2A One Two

'hree 0

1 0

35-Drain Line Loop 29 One 0

Two I

0 Three 1

38-Drain Line Loop 1

One 1

Two 0,

Three 0

PVA1941CURev 1 da

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-10 OF 1

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS B100 EXAM CATEGORY B-E-1 INTEGRAL ATTACHMENTS POR PIPING PUMPS AND VALVES 1010 PIPING INTEGRALLY WELDED ATTACHMENTS 1020 1030 22-SD Cooling Loop 2

24-SI Loop 1B 25-SI Loop 2A 26-SI Loop 2B 36-Lerdown Line PUMPS INTEGRALLY WELDED ATTACHMENTS VALVES INTEGRALLY WELDED ATTACHMENTS Two Three Three One One Two SI-179-H-10 RC-91-H-5 87-1485 87-1609 pvrrs4rcU Rev lM

o

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-12 OF 2

ASME ITEM NUMBER ZONE/ OMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION

,AMOUNT ITEM IDENTIFICATION~

Volumelrlc Surface EXAMINATIONREPORT NUMBER VIIueI REMARKS AND RELIEF REOUESTS B120 EXAM CATE B-L-I B-M-I PRESSURE RETAIHING WELDS IN PUMP CASIHGS AHD VALVE BODIES EXAM CATE B-L-2 B-M-2'UMP CASINGS AHD VALVE BODIES 1210 1220 PUMPS PUMP CASING WELDS 16-RC Pump 1A 17-RC Pump 1B 18-RC Pump 2A 19-RC-Pump 2B 16-RC Pump lA 17-RC Pump 1B 18-RC Pump 2A 19-RC-Pump 2B PUMP CASINGS Examine the Weld in 1

Pump.

Examine the Weld in 1

Pump "by end of interval 1230 16-RC Pump 1A 17-RC Pump 1B 18-RC Pump 2A 19-RC-Pump 2B VALVES VALVES HOMINAL PIPE Examine

'the Internal Surfaces in 1

Pump BODY WELDS 12!0 VALVES HOMINAL PIPE S~IZE 4 IN. VALVE BODY WELDS Borg Warner Gate Valves Utl,li-ing Eorged Construction Examine the Weld in 1

Valve pvlreel cO Her. r.ee

I

PALO VERDE NUCLEAR GENERATING STATION lNSERVlCE INSPECTlON

SUMMARY

REPORT TABLE:

PAGE 1-12 2

OF 2

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD

.AMOUNT ITEM IDENTIFICATION VDIUIuelrlc SU TI des EXAMINATIONREPORT NUMBER VIEudl REMARKS AND RELIEF REQUESTS 1240 CONTINUED Borg Marner Check Valve Utilizing Porged Construction'By end of interval Dresser Pressure Safety Valves Ucilizing Forged Construction Examine the Meld in 1

Valve 1250 VALVE BODY EXCEED-ING 4 IN NOMINAL P~IE SIZE Borg Marner Gate Valves Utilizing Eorged Conscruction Examine the Internal Surfaces of.

1 valve Borg Marner Check Valves Utilizing Cast Construction

'xamine che Internal Surfaces of 1

valve Dresser Pressure Safecy Valves Utilizing Forged Construction Examine the Internal Surfaces of 1

Valve PVEI90TCI/4ev 1 dd

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-13 1

1 OF ASME ITEM NUMBER RED UIR ED INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT ITEM IDENTIFICATION EXAMINATIONREPORT NUMBER Surlsce Volumelrlc visual REMARKS AND RELIEF REOUESTS IB130 I

EXAM CATEGORY B-N-l IHTERIOR OE REACTOR VESSEL B-H-2 INTEGRALLY WELDED CORE SUPPORT STRUC-TURES AHD INTERIOR ATTACHMENTS TO RE-ACTOR VESSELS B-H-3 REMOVABLE CORE SUP-PORT STRUCTURES

'310 REACTOR VESSEL VESSEL I'HTERIOR 1-Reeccoz Vessel

• One

• Trr0

<<Three 33X 33X 34X 87-1596 17 1320 1321 1322 1330 1331 1332 REACTOR VESSEi.

BWR INTERIOR ATTACHMEHTS CORE SUPPORT STRUC-TORE INTERIOR ATTACHMEHTS WITHIN BELTLIHE REGION INTERIOR ATTACHMENTS BEYOND BELTLINE REGIOH CORE SUPPORTs STRUCTURE 100X

• IL' 100X "Examine at 1st refueling and subsequently at 3 year intervals

""By end of interval s

I rsVAIS4)CU ASV.I Sl

0

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-14 1

OF 1

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumetric Surlece EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS

'B14O I

EXAM CATEGORY B-0 PRESSURE RETAINING IIELDS IN CONTROL ROD HOUSINGS 1410 REACTOR VESSEI.

IIELDS IN CRD HOUSING 2-Reactor Vessel Closure Head CEDM Housings 2-Reactor Vessel Closure Head CEDM Housings 2-Reactor Vessel Closure Head CEDM Housings 2-Reactor Vessel Closure Head CEDM Housings One Two Three One Two Three One Two Three One Two Three 1

12.

~ 1 1

2 1

1 2

PVAI94rtu Rsv r.ee

f

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-15 1

OF 1

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volume I/le Su/feed EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS IB150 I

EXAMINATION CATEGORY 8-P ALL PRESSURE RETAINING COMPONENTS 1510 1520 1530 15/vo 1550 1560 1570 SYSTEM LEAKAGE TEST Reactor Vessel Pressurizer Stean Generators Heat Exchangers Piping Puaps Valves Entire Pressure retaia-iag bouadary IWA-5000 IWB-5000 88-1007 "Each refueling 1511 1521 1531 1541 1551 1561 1571 SYSTEM HYDRO-TEST Reactor Vessel Pressurizer Stean Generators Heat Exchangers Piping Puaps Valves Entire Pressure retai.n-ing boundary IWA-5000 IWB-5000

""By end of interval PVA1941clJ IIsv 149

PALO VERDE NUCLEAR GENERATING STATION A N P 1s INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-16 1

1 OF ASME ITEM NUMBER ZONEICOMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION VolumeIrlc Suffece EXAMINATIONREPORT NUMBER Vlsuel REMARKS AND RELIEF REQUESTS

'B1600 EXAMINATION CATEGORY B-STEAM GENERATOR TUBING 1610 1620 N/A Per ASME Section XI and 10CPR50, All Eddy Current Exan-inations of Stean Generator Tubing will be perforned in accordance with PVNGS Technical Specifications pvsls4lcURsv 1se

PALO VERDE NUCLEAR GENERATING STATION A N P I INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1

1>>IP OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumelrlc Surlace EXAMINATIONREPORT NUMBER VIIUEI REMARKS AND RELIEF REQUESTS II>

P '.10 P)20 P)30 P)40 P210 P220 P230 P240 P3)0 P320 P330 140 P350 EXAM CATEGORY P-A LATE AND SHELL TYPE SUPPORTS and EXAM CATEGORY P-B LINEAR TYPE SUPPORTS and EXAM CATEGORY P-C COMPONENT STANDARD SUPPORTS 1-Reactor Vessel One T>ro Three 1

~ 1 2

"Include exam items as applicable 3-Steers Generator 1

One TNO Three 3-40 87-)549 4-Steers Generator 2

One Two Three 5-Pressur'ter One T>ro Three 16-Reacror Coolanr.

Punp

)A One T>ro Three 16-20 16-21 87-1458 87-1458 17-Reactor Coo)sar.

Punp

'S 18-Reactor Coolant Punp 2A One T>ro Three One TNO Three 17-20 17-21 18-12 18-13 18-14 18-15

)9-)2,)3>)4>)5 87-1459 87-1459 87-1460 87-1460 87-1460 87-1460 87-1461 PVAIGO1CV R>v T SS

0

PALO VERDE NUCLEAR GENERATING STATION A N P ls INSERVICE INSPECTION

SUMMARY

REPORT TABLE PAGE 1-IMP 2

OF 5

ASME ITEM NUMBER REQUIRED INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS

$ 110 P120 P130 E140 E210 P220 E230 P240 P310 P320 E330 P340 P350 I CONTINUED 19-Reactor Coolanc Punp 2B 20-PZR Surge Line 21-SD Cooling Loop 1

One Two Three One Two Three

~

One Two Three 4

. 2 4

7 8

RC-28-8-1 RC-28-8-2 SIT240-H-10 SI-240-8-11 SI-240-H-13 87-1445 87-1435 87-1462 87-1463 87-1464 22-SD Cooling Loop 2

23-SI Loop 1A 24-SI Loop 1B One Two Three One Two Three One 2

2 3

SI-223-8-3 SI-223-8-4 SI-223-8-7 SI-223-8-8 87-1437 87-1436 86-209 PSE 86-210 PSE 25-SI Loop 2A Two Three

~

One TWO Three SI-156-H-7 SI-156-8-9 87-1623 87-1508 PYA1941CU Rev. 1.aa

I i

I t'

f 1

'll 1

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE I-IWE OF ASME ITEM NUMBER INSPECTION ZONE/COMPONENT OR SYSTEM PERIOD REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VolumeITlc Surlaca EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS E110 E120 E130 E140 E210 E220 E230 E240 E310 E320 E330 E340 E350 I

CONTINUED 26-SI Loop 2B 27-PZR Spray Loop 1A One Two Three One Two Three 11.

8 SI-179-H-7 SI-179-H-10 SI-179-H-ll SI-179-H-9 SI-179-H-8 RC-62-H-27 RC:62-H-28 RC-62-H-29 RC-62-H-30 RC-62-H-31 RC-62-H-32 RC-62-H-33 RC-62-H-34 86-207 PSE 87-1486 87-1487 87-1473 86-208 PSE 87-1550 87-1551 87-1560 87-1561 87-1562 87-1563 87-1564 87-1565,1624 28-PZR Spray Loop lB 29-PZR Spray Loop 1B and Conbined 30-Aux PZR Spray One Two Three One Two Three One Two Three 9

8ll 0

0 2

RC-17-H-24 RC-17-H-34 RC-17-H-36 RC-17-H-38 RC-17-H-39 RC-17-H-40 RC-17-H-41 RC-17-H-42 RC-18-H-11 RC-18-H-16 RC-18-H-18 87-1566 87-1567 87-1568 87-1569 87-1570 87-1571 87-1572 87-1573 87-1625 PSE 87-1529 87-1530 PVA194TCU Rtv 14'

I

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-IIIE 4

OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumetric SUffSCd EXAMINATIONREPORT NUMBER VISUSI REMARKS AND RELIEF REQUESTS E'110 F120 F130 E140 F210 E220 E230 F240 F310 E320 F330 F340 F350 CORTIIRIED 32-Draia Line Loop IA 33-Drain Line Loop lB 34-Draia Line Loop 2A Oae Two Three Oae Two Three One Two Three 0

0 0

2 0

RC-60-8-A RC-60-8-B 87-1544 87-1545 35-Drain Liae Loop 2B 36-Letdovn Line Oae TNO Three Oae Two'hree 10 RC-91-H-1 RC-91-8-5 RC-91-8-AA RC-91-H-B RC-91-8-D RC-91-8-E

.RC-91-8-Y RC-91-8-2 87-1607 87-.'608 87-1446 87-1447 87-1448 87-1449 87-1450 87-1451 PVA1941 CIJ Rev 1 00

I

PALO VERDE NUCLEAR GENERATING STATION

~ m )

I INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Bur!ace EXAMINATIONREPORT NUMBER Vlsuel REMARKS AND RELIEF REQUESTS E)10 E)20 E)30 E140 E2)0 E220 E230 E240 E310 E320 E330 E340 E350 CONTINUED 37-Chargiag Liae Oae Two Three 14

)4 15 CH-5-8-2 C8-5-8-3 CH-5-8-25 CH-5-8-26 CH-5-8-27 CH-5-8-28 CH-5-8-30 CH-5-8-34 CH-5-H-35 CH-5-8-36 CH-5-8-42 CH-5-8-43 CH-5-8-44 CH-5-8-AA 87-1553 87-1554 87-1578 87-1465 87-1466 87-1474 87-1475 87-1476 87-1477 87-1478 87-1579 87-1555 87-1556 87-1577 38-Drain Line Loop 1

Oae Two Three 0

0 2

39-HPSI Supply Loop 1

One Two Three 5

5 SI-248-8-26 SI 248 8 17 SI-248-8-28 SI-248-8-30 SI-248-8-19 87-1489 87-1490 87-1491 87-1492 87-1636 PSE 40-HPSI Supply Loop 2

One Two Three NIA Snubbers:

IWE-5000 All iaservice testing re will be perEorned in acc with PVNGS Technical Spe uirereeats rdance ificatioa pvtlecrcU Rev. I se

PALO VERDE NUCLEAR GENERATING STATION A N P 1>

INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 1-RCP ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS REACTOR COOLANT PUMP PLYIIHEEL EXAMINA-TIONS REG.

GUIDE 1.14 16>

17>

18 aud 19 Reactor Coolant Pumps 1A, 18, 2A 2B Oae Two Plywheels Three r>vols4rcu R>v 1 Es

PALO VERDE NUCLEAR GENERATING STATION A N P 1'NSERYlCE tNSPECTlON

SUMMARY

REPORT TABLE:

PAGE 2-1 1

OF 3

ASME ITEM NUMBER ZONE/CjOMPONENT OR SYSTEM INSPECTION PERIOD REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER VISUSI REMARKS AND RELIEF REQUESTS C100 EXAM. CATEGORY C-A PRESSURE RETAINING IIELDS IN PPESSURE VESSELS 110 STEAM GENERATORS SHELL CIRCUMFEREN-TIAL ffELDS 41-Steam Generator 1

One Two Three 1*

0 0

" c,ach IIIeld 120 42-Steara Generator 2

HEAD CIRCUMEERE!I-TIAL ffELDS 41-Steam Generator 1

One Two Three One Two Three 0

01**

502 0

0

~ S0$ each ureld 42-Sceam Generator 2

One Two Three 0

0 502 130

. TUBESHEET-TO-SHELL WELD 41-Steam Generator 1

One Two Three

~ 0 502 0

42-Sceam Generator 2

One Two Three 502 0

1 REGENERATIVE HEAT EXCHAIIGER pvAIa.crcvarv 1 ba

J

'l

PALO VERDE NUCLEAR GENERATING STATION A N P I INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-1 OF ASME ITEM NUMBER ZONE/CDMPONENT OR SYSTEM REOUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumelrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 110 SHELL CIRCUMEEREN-TIAL IIELDS 68-Regenerative Heat Exchanger one T'wo Three 120 HEAD CIRCUMFEREN--

TIAL IIELDS 68-RegeneratLve Heat Exchanger One Two Three 130 TUBESHEET-TO-SHELL QELDS 68-Regenerate.ve Heat Exchanger One Two Three 0

2 2

LETDOIIN HEAT EXCHANGER 110 SHELL CIRCUMFEREN-TIAL IIELDS 120 69-Letdown Heat Exchanger HEAD CIRCUMEEREN-TIAL MELDS One'wo Three 50X 0

SOX 69-1 87-1587 130 TUBESHEET-TO-SHELL IELD 69-Letdown Heat Exchanger One Two Three 50X 0

50X 69-2 87-1588 PVA1941CU Rev l ea

I Cl

PALO VERDE NUCLEAR GENERATING STATION

+ nt I P

INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-l OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VolumeITIC Suflecd EXAMINATIONREPORT NUMBER Vlsuel REMARKS AND RELIEF REQUESTS SHUTDOWN COOLING HEAT EXCHANGERS llO SHELL CIRCUMPPREN-TIAL WELDS l20 74-SD Cooling Heat Exchanger I

75-SD Cooling Heat Exchange 2

HEAD CIRCUMPEREN-TIAL WELDS One Two Three One T'wo Three 0

50X 0

0 0

50X I30 TUBESHEET-TO-SHELL WELD 74-SD Cooling Heat Exchanger 1

One Two Three 0

50X.

,0 75-SD Cooling Heat Exchanger 2

One Two Three 0

spaz PVAIS41CURvv 14'

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-2 OF ASME ITEM NUMBER ZONE/CPMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumelslc Surlece EXAMINATIONREPORT NUMBER Vlsuel REMARKS AND RELIEF REQUESTS C200 EXAM CATEGORY C-B PRESSURE RETAINING NOZZLE MELDS IN VESSFLS 210 N ZZLES IN VESSELS'HICKNESS None 220 C

221 222 NOZZLES WITHOUT REINFORCING PI.ATE IN VESSELS P' 2 IN-NOMINAL THICKNESS, NOZZLE-TO-SHELL AND NOZZLE INSIDE RADIUS SECTION 41-Steaes Generator 1

One Two Three 42-SteaIR Generator 2

One TNO Three 1

2 1

74-SD Cooling Heat Exchanger 1

75-SD Cooling Heat Exchanger 2

One Tsso Three I

One Two Three 0

1 0

~0 0.

230 NOZZLES IIITH REIN-FORCING PLATE IN VESSELS 1

2 IN NOMINAL THICKNESS PVAI94TCURev S.SS

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-2 2

OF 2

ASME ITEM NUMBER REQUIRED INSPECTION EXAMINATION ZONEICPMPONENT OR SYSTEM PERIOD AMOUNT ITEM IDENTIFICATION Voluruelrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 23l 232 REINFORCING PLATE WELDS TO NOZZLE AND VESSEL NOZZLE-TO-SHELL OR HEAD WELDS INSIDE OF VESSEL ACCESSIBLE INSIDE OF VESSEL INACCESSIBLE PVr I941CU Aev 14S

I~

PALO VERDE NUCLEAR GENERATING STATION A N P I'NSERVICE INSPECTION

SUMMARY

REPORT TABLE'AGE 2-3 OF ASME ITEM NUMBER C300 INSPECTION ZONE/COMPONENT OR SYSTEM PERIOD EXAM CATEGORY C-C INTEGRAL ATTACHMENTS I FOR VESSELS PIPING PUMPS AND VALVES REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volume lrlc Surface EXAMINATIONREPORT NUMBER Visuel REMARKS AND RELIEF REQUESTS 310 PRESSURE VESSELS INTEGRALLY IIELDED ATTACHMENTS 41-SteaIR Generator 1

One Too Three 1

0 0

42-Stean Generator 1

One Too Three 0

~ 1 0

68-Regenerative Heat Exchanger One Two Three 0

)

1 320 PIPING INTEGRALLY 'QELDED ATTACHMENTS 43-Main Stean SG-l 90 Inside Cont One Two Three SG-36-H-17 87-1515 44-Main Stean SG-l 270 Ins de Cont One Two Three 45-Main Stean SG-2 270 Inside Cont One Tuo Three SG-42-H-14 SG-42-H-15 SG-42-H-16 87-1538 87-1517 87-1517 46-Main Stean SG-2 90 Inside Cont One Two Three 0

2 3

PVCI%41cu Rev ace 51-Atnospheric Dunp SG-1 One

Too, Th ee

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2

OF 4

ASME ITEM NUMBER 320 REQUIRED INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT COHTIHDED ITEM IDENTIFICATION Volumelrlc Surlece EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 52-Atmospheric Dump SG-2 One Two Three 53-Steam to Aux Peedwater SYstem One Two Three 54-Peedwater SG-1 Inside Cont.

55-Peedwater SG-2 Inside Cont.

One'wo Three Oae Two Three 62-Aux. Peedwater S/G-1 One Two Three 64-Blowdowa SG-1 Iaside Cont.

65-Blowdown SG-2 Inside Cont.

70-LPSI Pump Suction Loop 1

71-LPSI Pump Suction Loop 2

72-LPSI Pump Discharge Loop 1

74-SD Cooling Hx Outlet Loop 1

One Two Three

'ne Two Three Ons Two Thrsh.

One Two Three One T'wo Three.

One Two Three 23.

2 2

0 I

1 0l.

SI-241-H-21 I-369-8-1 I-194-8-14 I-87-8-11 I-70-H-12 I-70-8-9 87-1334 87-1433 87-1322 87-1304 7-1335 7-1335

I

PALO VERDE NDCLEAR GENERATING STATION A N P ie INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-3 3

O 4

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumefrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 320 COIITIIIUED 75-SD Cooling Hx Outlet Loop 2

Ons Two Three SI-72-H-13, 87-1324 76-LPSI Header lA ~

Ons Two Three SI-70-H-11 SI-70-H-16 87-1336 87-1337 79-LPSI Hoader 2B One Two Throe 80-Containnent Spray Punp Suction Loop 1

82-Containnent Spray Discharge Loop 1

83-Containnent Spray Discharge Loop 2

84-Containnsnt Sunp Suction Loop 1

85-Containnent Sunp Suction Loop 2

One Two Three Ons Two Three One Two Three One

~

Two Three One I

Two Three 0

1 1

0.

0 1

0 1

0 0

. 0 1

SI-9-H-4 87-1268 330 PUMPS IIITECRALLY WELDED ATTACHMEIITS 72-LPSI Purep Loop 1

One Two Three 2l 0

72-3A, 3B 87-1362 PVAI947 Cv rIev, t ra 73-LPSI Punp Loop 2

One Two Th ee

f

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-3 4

4 OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER VIIVSI REMARKS AND RELIEF REQUESTS 330 COHTTNUED 80-Conrainnenr Spray Punp Loop One Tuo Three 80-3Av 3B 87-1261 81-Conrainnenr Spray Punp Loop 2 One Trro Three 340'ALVES jNTECRALLY WELDED ATTACHMENTS pvAI941cu IIev f4'

PALO VERDE NUCLEAR GENERA'TING STATION A N P 1

INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-4 OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumelrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS C400 EXAM CATEGORY C-D PRESSURE RETAINING BOLTING EXCEEDING 2 IN. IN DIAMETER 410 PRESSURE VESSELS.

BOLTS AND STUDS 420 430 PIPING BOLTS AND STUDS PUMPS BOLTS AND STUDS 440 VALVES BOLTS AND STUDS 47-Main Stean SG-1 270 MSSS One

~ 20 V170 87-1375 48-Main Steals SG-1 90 MSSS One 20 V180 87-1376 49-Main Stean SG-2 270 MSSS Three 20 50-Main Stean SG-2 90 MSSS Three 20 56-Peedwater SG-1 MSSS Two Two 20 20 57-Feedwater SG-2 MSSS Three Three 20 20 PVAI941CUAev l SS

Ir E

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-5 1

4 OF ASME ITEM NUMBER ZONEICOMPONENT OA SYSTEM AEQUIRED INSPECTION EXAMINATION PERIOD

. AMOUNT ITEM IDENTIFICATION Volurnelrlc Surlsce EXAMINATIONAEPOAT NUMBER Visual AEMAAKSAND AELIEF REQUESTS C500 EXAMItIATIOHCATEGORY C-E PRESSURE RE-TAIHIHG IIELDS IH PIPING 510 511 512 PIPING IIELDS ~ I 2

IN. OR LESS HOMINAL

'MALL THICKNESS CIRCUMF"RE)ITIAL AND

• LONGITUDINAL'MELDS 53-Steam to Aux.

Feedwater 58-Aux. and Down-comer Eeedwater SG-1 Inside Cont One Two Three 1

2 0

59-Aux. and Down-comer Feedwater SG-2 Inside Cont One Two Three 520 521 522 PIPING IIELDS MALL THICKtIESS CIRCUMFEREHTIAL AND

• LONGITUDIHAf MELDS Pvrls.OTCURev.l se 43-Main Steam SG-1 90 Inside Cont.

One

wc Thred I

I 43-1 43 2

43-22 8?-1557 87-1547 87-1532 87-1527 87-1527 87-1515

" 2.5T NIN FROtrt EACH SCHEDULED CODE )IIELD INTERSECT?ON

I h

I

PALO VERDE NUCLEAR GENERATING STATION lNSERYlGE lNSPECT(ON

SUMMARY

REPORT TABI.E:

PAGE 2-5 2

O 4

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REOUIREO INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION VolumeIrlc SUTIece EXAMINATIONREPORT NUIABER Vlsuel REMARKS AND RELIEF REOUESTS 521 522 COIITIIIUED 44-Hain Stean SG-l 270 Inside Cont.

'ne Two Three 44-26 44-28 44-30 87-1548 87-1533 87-1534 87-1528 87-1528 87-1528 45-Hain Stean SG-2 270 Inside Cont.

One Two Three 46'-Hain Stean SG-2 90 Inside Cont.

47-Hain Stean SG-1 270 HSSS Ons Two Three 46-25 46~27 87-1523 87-1524 87-1519 87-1519 "See -Table 2-AHE 48-Hain Stean SG-1 90 HSSS 49-Hain Stean SG-2 270 HSSS 50-Hain Stean SG-2 90 HSSS 51-Atnosphers Dunp SG-1 52-Atnosphere Dunp SG-2 PVAIS4ICU Aev 146

il 11 ll

~I I

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-5 3

4 ASME ITEM NUMBER EONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION

~ AMOUNT ITEM IDENTIFICATION Volumelrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 521 522 CONTINUED 54-Feedwater SG-1 Inside Cont.

One Two Three 5

5 6

55-Eeadwatar SG-1 Inside Cont.

-One Two Three 56-Eeadwater SG-1 MSSS "See Table 2AHE 57-Eeedwater SG-2 HSSS 58-Aux.

and Down-comer Feedwatar SG-1 Inside Cont One Two Three 58-19 58-20 87-1481 87-1482 87-1480 87-1480 59-Aux.

and Down-comar Eeadwater SG-2 Inside Cont One Two Three 2

1 59-33 59-34 87-1483 87-1484 87-1479 87-1479 60-Downcomer Eeed-watar SG-1 HSSS 61-Downcomar Eeed-watar SG-2 MSSS Pvrrecrtbrrev wee

1

0 PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-5 4

OF 4

ASME ITEM NUMBER ZONEICOMPONENT OR SYSTEM AEQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM

'DENTIFICATION Volumetric Surface EXAMINATIONAEPOAT NUMBER Visual REMARKS AND REI.IEF REQUESTS 521 522 CONTINUED 62-Aux. Eeedwater SG-1 HSSS One Two Three 62-24 87-1367 87-1359 63-Aux. Eeedwatet SG>>2 MSSS One Two Three 63-4 87-1368 98 1360 64-Blowdown SG-1 Iaside Cont Oae Two Three 65-Slowdown SC-2 Iaside Cont 66-Blowdown SG-1 MSSS One Two Three "See Table 2AHE 67-Blowdown SG-2 HSSS 530 531 532 PIPE BRANCH CONNEC-TIONS 4 IN.

NOMINAL PIPE SIZE CIRCUMEERENTIAL AND Iv*LONCITUDINALUELDS 47-Haia Stean SG-1'70 HSSS 48-Hain Stean SG-1 90 MSSS 59-Hain Stean SG-2 270 HSSS 50-Hain Stean SG-2 90 MSSS PVAIS41CU 4ev I45

I l

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-6 1

1 OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REOUIRED INSPECTION EXAMINATION PERIOD

~ AMOUNT ITEM

- IDENTIFICATION Volumelrlc SUTIece EXAMINATIONREPORT NUMBER Vbuel REMARKS AND RELIEF REOUESTS C600 EXAM CATEGORY C-G PRESSURE RETAIllING WEl DS IN PUHPS AND VALVES 610 620 PUMPS PUHP CASING WELDS VALVES VALVE BODY WELDS

Dresser, 6" x 10";

Pressure Safety Hain SteaTS Valves ExaTsine the weld in )

valve "By end of interval Borg Warner, 16" Gate Valves LPSI Punp Suction ExaeIine the weld in 1

valve Borg Warner, 6"

Gate Valves SD Cooling Hx Outlet ExaeIi.ne the weld, in 1

valve PVA)e OTclIAev T4d

PALO YEROE NUCLEAR GENERATING STATION A N P I'NSERVICE INSPECTION

SUMMARY

REPORT TABLE'AGE 2-7 OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VOIumeIrlc SUTIace EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS C700 EXAM CATEGORY C-H ALL PRESSURE RETAINING COMPO-NENTS 710 730 750 770 SYSTEM PUNCTIONAL TESTS Pressure Vessels Piping Pumps Valves Entire Pressure retain-ing boundary II/A-5000 INC-5000 "Each period SYSTEM HYDRO-TESTS 720 740 760 780 Pressure Vessels Piping Pumps Valves Entire Pressure retain ing boundary IMA-5000INC-5000'"Each interval PYAlsolclJ Sev 14a

I

PALO VERDE NUCLEAR GENERATING STATION A N P Is INSERYICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-IWP 1 OF 7

ASME ITEM NUMBER P110 P120 P130 P140 P210 P220 P230 P240 P310 P320 P330 P340 P350 ZONE/CPMPONENT OR SYSTEM EXAH CATEGORY P-A PLATE AND SHELL TYPE SUPPORTS and EXAM CATEGORY P-B LINEAR TYPE SUPPORTS and EXAH CATEGORY P-'C COMPONENT STANDARD SUPPORTS 41-Steers Generator 1

42-Steara Generator 2

INSPECTION PERIOD One Two Three One Two Three REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumelrlc SUfface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS Irlncludes exam item as available 43-Hain Stean SG-l 90 Inside Cont One Two Three<

SG-36-8-17 SG-36-8-884

'SG-36-8-885 87-1513 87-1522 87-1514 44-Main Steara SG-l 270 Inside Cont One Two Three 5

3 SG-33-8-17 SG-33-8-18 87-1600 87-1516 45-Hain Stean SG-2 270 Inside Cont 46-Main Stean SG-2 90 Inside Cont.

One r

Two Three One'wo Three SG-42-8-14 SG-42-8-15 SG-42-H-16'G-45-8-17 SG-45-H-18 87-1537 87-1599 87-1518 87-1520 87-1521 47-Main Stean SG-1 270 MSSS One Two Three

.1 0

0 SG-206-8-1 87-1240 pv44941CU 44v 1 aa

'I I i

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2

QF 7

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumelrlc Surlace EXAMINATIONREPORT NUMBER Vljual REMARKS AND RELIEF REOUESTS El)0 E120 E130

'E140 P210 P220 P230 P240 P310 E320 E330 E340 E350 CONTINUED 48-Main Stean SG-1 90 MSSS 49-Main Stean SG-2 270

MSSS, 50-Main Stean SG-2 90 MSSS 51-Atnosphere Dunp SG-1 One Two Three One Two Three One Two Three One Two Three 0

0 1

SG-59-8-6 87-1606 52-Atnosphere Dunp SG-2 One Two Three 53-Stean to Aux.

Peedwater SYsten One Two Three 2'

SG-81-8-1 SG-81-8-2 SG-83-8-1 SG-83-8-2 87-1241 87-1242 87-1243 87-1244 54-Peedwater SG-1 Inside Cont One Two Three 7

7 7

55-Peedwater SG-2 Inside Cont 56-Eeedwater SG-l MSSS One Two

'hree One Tiro Three 0l.

0 SG-5-H-8 86-98 PSE 57-Eeedwater SG-2 MSSS One Two Three pvlleercuaev, 1 aa

I

PALO VERDE NUCLEAR GENERATING STATION

~ tv e ~

INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-IWE 3

OF 7

ASME ITEM NUMBER REQUIRED INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT ITEM IDENTIFICATION Volumelrlc SUTIace EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS E110 P120 F130 E140 E210 P220 E230 E240 P310 F320 F330 F340 P350 CONTINUED 58-Aux. and Down-coner Eeedwater SG-l Inside Cont 59-Aux. and Down-coner Peedwater SG-2 Inside Coat One Two Three One Two Three 6

10 AE-6-8-1 SG-11-8-10 SG-11-8-11 SG-11-8-12 SG-11-8-8 SG-11-8-9 87-1452 87-1455 87-1456 87-1457 87-1453 87-1454 60-Dowacouer Feed-water SG-1 MSSS

One Two Three SG-200-H-9 87-1296 61-Downcoaer Peed-water SG-2 MSSS One Two Three 0

2 1

62-Aux. Eeedwater SG-1 MSSS One Two Three 1'

2 AF-4-8-3 87-1245 63-Aux. Feedwater SG-3 MSSS Oae 2

AP-6-8-2 AE-16-8-1 87-1246 87-1247 64-Blowdown SG-1 Inside Cont.

Two Three I

One Two Three 12 13 12 65-Blowdown SG-2 Iaside Cont.

One Two Three 12 12 13 68-Regenerative Heat Exchanger One

.0 Two 1

Three, 1

PVAIvvcTCU Rev 1.SS

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE

- Ilu 4

OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD

= REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VOIURIel/lc Suflsce EXAMINATIONREPORT NUMBER Vhusl REMARKS AND RELIEF REQUESTS E110 E 20 E130 E140 E210 E220 E230 E240 E310 E320 E330 E340 E350 CONTINIIED 70-LPSI Pump Sucnion Loop 1

71-LPSI Pump Sucrion Loop 2 72-LPSI Pump Discharge Loop 1

73-LPSI Pump Discharge Loop 2

One Two Three One Two Three One Two Three I

One Two Thiee 9

15 9

15 2

SI-67-8-4

~

SI-239-8-3 SI-241-8-12 SI-241-H-14 SI-241-8-15 SI-241-H-19 SI-241-8-21 SI-369-8-1 SI-34-8-1 SI-34-8-2 SI-34-8-3 SI-194-8-3 SI-194-8-5 SI-194-8-12 SI-194-8-13 SI-194-8-14 SI-194-8-23 SI-194-8-18 72-3AI 3B SI-78-8-5 SI-87-8-11 SI-123-8-6 SI-123-8-7 87-1301 87-1341 87-1339 87-1349 87-1350 87-1471 87-1340 87-1434 87-1253 87-1254 87-1255 87-1258 87-1257 87-1310 87-1311 87-1312 87-1313 87-1626 PSE 87-1369 87-1278 87-1302 88-1005 87-1249 PVAI9 0/CU Aev 1.SS

I f

Ij f

I

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-IIIP OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REOUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION VOIGNI@I5IC Surlace EXAMINATIONREPORT NUMBER VISUSI REMARKS AND RELIEF REOUESTS 5110 P120 P130 E140 E210 E220 P230 P240 P310 E320 P330 E340 E350 I CONTINIIED 74-SD Cooling Hx Outlet Loop 1

75-SD Cooling Hx Outlet Loop 2

One Two Three One T550 Three 8

10 8

9 13 SI-70-8-10 SI-70-8-12 SI-70-8-15 SI-70-H-9 SI-87-8-9 SI-89-8-1 SI-89-8-2 SI-89-8-3 SI-72-8-8 SI-72-H-10 SI-72-H-11 SI-72-H-13 SI-72-H-14 SI-129-8-10 SI-129'-H-11 SI-129-8-12 88-1001 87-1344 87-1345 87-1342 87-1280 87-1281 87-1282 87-1283 87-1289 87-1290 87-1314 87-1315 87-1316 87-1248 87-1250 87-1251 76-LPSI Header lA One TPTO Threes SI-70-H-11 SI-70-8-13 SI-70-8-16 8 I-202-'H-7 SI-202-8-8 SI-202-H-9 v

87-1343 88-1003 87-1644 87-1493 87-1494 87-1495 pvi59410UIIav 5 55

~ p I

r I

I

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-IVE 6

OF 7

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumelrlc Surlsce EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 0110 E120 E'130 P140 P210 E220 P230 P240 P310 P320 E330 E340 E350 CONTINUED 77-LPSI Header lB 78-LPSI Header 2A One Two

~

Three One Two Three 9.

10 4

5 6

SI-220-H-9 SI-220-8 SI-220-8-11 SI-220-8-12 SI-220-8-13 SI-220-8-14 Si-220-H-15 SI-220-8-19 SI-220-8-22 SI-72-H-21 SI-72-H-22 SI-155-8-4 SI-155-H-5 SI-155-H-6 87-1496 87-1497 87-1498 87-1499 87-1500 87-1501 87-1506 87-1502 87-1507 87-1317 87-1318 87-1627 PSE 87-1503 87-1504 79-LPSI Header 2B One Two Three 3

SI-73-8-1 SI-73-8-2 SI-73-8-3 87-1319 87-1320 87-1321 80-Containnent Spray Punp Suction Loop 1

One Two Three 80-3A,.3B SI-9-8-4 87-1260 87-1259 81-Containnent Spray Puup Suction Loop 2

One Two Three

~

PVAI9-01CU 4ev, I SS

I

~ l I

Ij r

I(

Ij 1

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE PAGE 2-ICE 7

OF 7

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION VolumeITIC SUTIECS EXAMINATIONREPORT NUMBER VISUSI REMARKS AND RELIEF REOUESTS 4 110 F120 P130 8140 E210 F220 F230 F240 8310 COIITIIIUED 82-Conteinaeat Spray Discharge Loop 1

83-Contaiaaeat Spray Discharge Loop 2

Oae T4TO Three One T4TO Three 5

8,

~

6 7

8 SI-79-H-1 SI-79-8-2 SI-79-H-3 SI-79-8-4 SI-79-8-10 SI-89-8-7 SI-89-8-8 SI-89-H-9 SI-119-8-7 SI-119-H-8 SI-119-8-9 SI-119-8-10 SI-134-8-11 SI-134-8-12 87-1267 87-1264 87-1265 87-1266 87-1279 87-1291 87-1292 87-1293 87-1256 87-1331 88-1006 87-1252 87-1294 87-1295 84-Coataiaaent Sunp Suction Loop 1

85-Contaiaaent Sunp Suet'oa Loop 2

Oae TTTO Three Oae TTTO Three PVAI9-OTCVRev 1 44

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-CPR 1

OF 5

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REOUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumalrlc Surlace EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS

'C500 510 EXAM. CATEGORY C-P*

PRESSURE RETAINING WELDS IN PIPING PIPING WELDS 1

2 IH. NOMINAL WALL THICKNESS OTZ 3

• EXTEHT OP E

MS WERE DE-TERMINED USIN THE 1974 EDIT ON THRU SUMMER 1

75 ADDENDA OP SME SECTION XI

• • 2.5T MIN.

ROM EACH SCHED LZD CIRC WELD IN ERSECTION WILL BE EXAMIHED.

511 512 CIRCUMPEREHTIAI. AND

• • LONGITUDINAL WELDS

('75 CATEGORY C-P NOTE 1:

AN A GMENTED VOLUME EXAMINATION 0 THE CIRCUMEER TIAL WELDS W LL BE PERPORME CONJUNCTION ITH THE REQUIR

'WHEN PRACTIC L (NOTE IE BUL NOTE 21 ALL LINES ARE CONSIDERED MU TIPLE SYSTEMS UNLESS HOTED RIC W-IN D SURPACE EXAMS ETIN 79-17)

NOTE 31

'NUMB RS IN (*) ARE 40 YEAR TOTAL 70 (r 71 LPSI Punp Suction One (3)70-134 87-1586 87-1433 Two Three One Tuo Three 1

1 (4) 70-2 87-1355 87-1332 One Two Three (3) 1 1

1 70-80 87-1353 87-1333 One Trro Three'3)0 1

70-85 87-1352 87-1333 pvl194rcu Rev uaa

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-CER 2

OF 5

ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumafrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 511 512

" CONTINUED I 70 0

71 LPSI Punp Sucnion (connrd)

One Two Three (6) 2 70-16 70-17 87-1356 87-1357 87-1333 87-1333 One Two Three-One Two Three (3) 1 1

1 (3) 1

~

1 1

70-104 70-58 87-1326 87-1325 87-1303 87-1303 72 8

73 LPSI Punp Discharge One Two Three One Two Three (2) 1 0;

1 (2).

2 70-69 72-5 72-6 87-1363 87-1327-87-1328 87-1361 87-1304 87-1304 One Two

~

Three

.(3) 1 1

1 72-8 87-1329 87-1304 One Two Three

~

(4) 1 2

1 72-48 87-1284 87-1275 One Two Three (2) 1 1

0 72-61 87-1285 87-1275 PVAI94TCUIISV t aa One

Two, Three (2) 0 1

1

1

PALO VERDE NUCLEAR GENERATING STATION

~ rv I I

INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-CPI(

OF ASME ITEM NUMBER ZONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 511 COIITIHHED 512'4 (r 75 SD Cooling Hx Ourlet One TWO Three (6) 2 74-19

, 74-44 87-1299 87-1358 87-1277 87-1335 One TWO'hree (1) 1

.0 0

74-21 87-1300 87-1277 One TWO Three (2) 1 0

1 74-87 87-1287 87-1276 One TWO Three (1) 1 0

~

0 74-100 87-1297 87-1277 One TWO Three (3) 1 1

1 74-105 87-1298 87-1277 76, 77>

78 (r

79 LPSI Headers 1A;1B,2A ar)d 2B One TWO ThreI)

One TWO Three (5) 1 2

2 (3) 1 1

1 74-74 76-2 87-1286 87-1354.

87-1276 87-1338 77 6

78 LPSI Headers 1B and 2A One TWO Three

( 1).

0 1

0 pvcrselcURev r Ea

h II il f

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-CPR OF AS ME ITEM NUMBER REQUIRED INSPECTION EXAMINATION ZONEICOMPONENT OR SYSTEM PERIOD AMOUNT I

ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REOUESTS 511 512 I

CONTINUED 80 (r 81 Containnent Spray Pursp Suction.

One Two Three (2) 1 1

0 80-16 87-1270 87-1263 80 lk 81 Containnent Spray Punp Suction One Two Three (3) 1 1 '

80-10 87-1271 87-1262 82 R 83 Containnent Spray Punp Discharge One Two Three One Two Three (1) 0 0

1 (8) 3 82-1A 82-1 82-2 87-1272 87-1273 87-1274 87-1269 87-1269 87-1269 One Tlro Three (8) 2 82-47 82-48 87-1308 87-1307 87-1288 87-1288 One Two Three (1) 0 1

0 84 8

85 Contpinnent Sunp Suction One Two Three (1) 0 0

1 520 PIPING IfELDS OVER 2 IN. NOMINAL I)ALL THICKNESS Pvsl94TCV Rsv 1 Sa

I

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-CER 5

5 ASME ITEM NUMBER 2ONE/COMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD

. AMOUNT ITEM IDENTIFICATION Volurnelrlc Surlece EXAMINATIONREPORT NUMBER Vlsuel REMARKS AND RELIEF REQUESTS 521 522 CIRCUMPERENTIAL AND

• LONCITUDINAl.WELDS

('75 Category C-E) 70 6 71 LPSI.Pump Suction One Tuo Three (0) 0 0

0 "2.5T min from each ueld intersection 76> 77, 78 0 79 LPSI Headers lA,1B,2A and 2B One Trro Three (3) 1 1

1 78-16 87-1330 87-1323 One Tlro Three (6) 2 2

2 78-45 78-47 87-1511 87-1512 87-1505 87-1505 84 I 85 Containment Sump Suction One Trro Three (1) 0 1

0 530 531 532 PIPE BRANCH COHHEC-TIONS.

CIRCUMPERE'HTIAL AND

• LONGITUDINALUELDS 70 6

71 LPSI Pump Suction One Tuo Three

~ (0) 0 0

.0 Pvrrg-otc(J rlev, r ee 72 6

73 LPSI Pump DischarSe 74 6

75 SD Cooling Hx Outlet One TWO

~

Three I

I One Tuo Thre (1) 1 (

0 0

(2) 1 0

1 72-49A 74-102 87-1275 87-1351

I

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TAULE:

PAGE 2-AHE 1

4 OF ASME ITEM NUMSER ZONE/COMPONENT OR SYSTEM INSPECTION PERIOD REOUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumelrlc Suffdce EXAMINATIONREPORT NUMBER Vlsudl REMARKS AND RELIEF REOUESTS AUGHENTED EEAHINA-ATIONS OE HIGH ENERGY PIPING 510 PIPING MELDS MALL THICKNESS 511 512 CIRCUHEERENTIAL AND

• • LONGITUDINAL MELDS 51-Bypass UV-180 One Two Three 0

12 0

None 520 52-Bypass UV-171 53-SteaIa to Aux Eeedwater PIPING MELDS +

1 2 IN NOHINAI MALL THICKNESS One Two Three One Two Three 0

0 12 10 53-11 53-12 53-13 53-14 53-15 53-21 53-22 53-23 53-24 53-25 87-1415

~

87-1416 87-1417 87-1418 87-1419 87-1420 87-1421 87-1422 87-1423 87-1424 87-1381 87-1381 87-1381 87-1381 87-1381 87-1381 87-1381 87-1381 87-1381 87-1381 PVAI9OTCU Aev, I ed

/I l

'1 II l

PALO VERDE NUCLEAR GENERATING STATION INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-AHE 2

4 OF ASME ITEM NUMBER INSPECTION ZONE/CIOMPONENT OR SYSTEM PERIOD REQUIRED EXAMINATION AMOUNT ITEM IDENTIFICATION Volumelrlc Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 521 522 CTRCUHPERENTTAL AND

<LONGTTUDTNAL WELDS 47-Hain Stean SG-1 270 HSSS 48-Main Stean SG-)

90 MSSS 49-Main Steaza SG-2 270 MSSS One TWO Three One TWO Three One TWO Three 14 0

14 0

0 0

,14 47-1 47-2 47-12 47-4 47-8 47-14A 47-16 47-20 47-24 47-25 47-28 47-29 47-30 87-1413 87-1414 87-1442 87-1440 87-1441 87-1382 87-)443 87 1444 87-1385 87-1386 87-1391 87-1392 87-1387 v

87-1374 87-1374 87-1374 87-)374 87-1374 87-1373 87-1373 87-1373 87-1396 87-1373 87-1373 87-1373 87-1373 uf00$ of intersecting longitudinal IIfejds.

50-Main SteaTA SG-2 90 MSSS 5)-Atnospheric Dunp SG-1 One

~

-Two Thiee

.One Twc Three 0

0 14'3 0

51-1 51-2 51-3 51-4 51-5 51-6 51-7 5 1'-'8A 51-8B 51-9 51-51 87-1393 87-1399 87-1394 87-1395 87-1400 87-1401 87-1402 87-1403 87-1404 87-1405 87-1406 87-1377 87-1378 87-1378 87-1378 87-1378 87-1380 87-1380 87-1380 87-1397 PYA1941CV 4ev 1 aa

I

PALO VERDE NUCLEAR GENERATING STATION A N P P INSERVICE INSPECTION SVMMARYREPORT TABLE:

PAGE 2-AHE 3

OF 4

ASME ITEM NUMBER 521 522 REQUIRED INSPECTION EXAMINATION ZONE/COMPONENT OR SYSTEM PERIOD AMOUNT COIITTIIUED ITEM IDENTIFICATION Volurnelrlc Surlace EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 52-Atnospher'c Dunp SG-2 56-Peedwater SG-1 MSSS 57-Peedwater SG-2 MSSS One Two Three One Two Three One Two Three 0

0 24 60-Downconer Peed-water SG-1 MSSS One Two Three.

60-11 60-12 60-14 60-15 60-16 60-17 60-7 60-8 60-9 87-1428 87-1429 87-1430 87-1431 87-1432 87-1425 87-1426 87-1427 87-1364 87-1364 87-1364 87-1364 87-1364 87-1364 87-1398 87-1398 87-1364 61-Downconer Peed-water SG-2 MSSS One Two Three 0

-5 9

66-Blowdown SG-1 MSSS One Two Three 4

5 6

66-1 66-2 66-3 66-5 66-6 66-7 66-8 66-9 66-26 87-1370 87-1407 87-1408 87-1409 87-1410 87-1411 87-1412 87-1371 87-1366 87-1366 87-1366 87-1366 87-1366 87-1366 87-1366 87-1366 87-1366 530 Pver941CU Rev 14s 67-Blowdown SG-2 MSSS Pi e Branch Connec-tions One Two Three

il l~

,1 Cl

PALO VERDE IIUOLEARGENERATING STATION A N P P INSERVICE INSPECTION

SUMMARY

REPORT TABLE:

PAGE 2-AHE 4

OF "4

ASME ITEM NUMBER ZONE/IrOMPONENT OR SYSTEM REQUIRED INSPECTION EXAMINATION PERIOD AMOUNT ITEM IDENTIFICATION Volumetric Surface EXAMINATIONREPORT NUMBER Visual REMARKS AND RELIEF REQUESTS 531 532 Ci cune ferential and

• Lou 'tudinal Ifelds 47-Main Stean SG-1 270 MSSS 48-Main Stean SG-1 90 MSSS 49-Main Stean SG-2 270 MSSS One Two Three One Tuo Three One Tuo Three 47-3 47-7 47-11 47-15 47-19 47-23 47-27 87-1388 87-1389 87-1390 87-1438 87-1383 87-1384 87-1439 87-1374 87-1374 87-1374 87-1373 87-1373 87-1373 87-1373 None 50-Main Stean SG-2 90 MSSS One T'wo Three PVAI947 CU Rev uea

1 C

APPENDIX B INSERVICE INSPECTION CODE LIMITATIONS

~ '

ji

INSERVICE INSPECTION CODE LIMITATIONS ASME ITEM NO.

ZONE ITEM IDENTIFICATION EXAM REPORT ¹ LIMITATIONS AHE 5.21 60 60 12 87-1364 HANGER ANO VALVE CONFIGURATION LIMITS VOLUPETRIC EXAMINATION.

SURFACE EXAMINATION PERFORMED.

AHE 5.21 66 66-3 87-1366 HANGER AND VALVE CONFIGURATION LIMITS VOLUYETRIC EXAMINATION.

SURFACE EXAMINATION PERFORrtEO.

AHE 5.21 51 AHE 5.21 51 51-7 51-BA 87-1402 87-1403 HANGER PIPE CLAMP COVERS PIPE WELD.

SURFACE EXAM NOT PERFORMED.

HANGER PIPE CLAMP COVERS WELD.

SURFACE EXAM NOT PERFORMED.

j I

I' ji'l, jf t

APPENDIX C FORM NIS-1 OWNERS'ATA REPORT FOR INSERVICE INSPECTION

I i

FORM NIS-1 OWNERS'ATA REPORT FOR INSERVICE INSPECTIONS 1.

OWNER Arizona Public Service Com an Et al ADDRESS P. 0.

Box 53999;

Phoenix, AZ 2.

PLANT Palo Verde Nuclear Generatin Station ADDRESS 4 Miles South; Wintersbur AZ 3.

UNIT NO.

1 4.

OWNERS CERTIFICATE OF AUTHORIZATION 5.

COMMERCIAL SERVICE DATE Januar 28, 1986 6.

COMPONENTS INSPECTED:

COMPONENT OF APPURTENANCE MANUFACTURER OR INSTALLER SERIAL NUMBER STATE OR PROVINCE NATIONAL BOARD NO The Items examined along with their examination Report numbers are listed in Appendix A."

PAGE 1

OF 2

1

A FORM NIS-1 (BACYi) 7.

SIAM DATES 1-2886 TO 3-IM8 8.

INSP INTERVAL FROM 1-2866 TO 1-27-96 9.

ABSTRACT OF EXAHINATION. INCLUDE A LIST OF EXAHINATIONS AND A STATEHENT CONCERNIiNG STATUS OF WORK REQUIRED FOR CURRENT INTERVAL.

All of the examinations performed during this period are listed in Appendix A.

The examinations are listed by ASME Numbers with corresponding Examination Report Numbers.

10.

ABSTRACT OF CONDITIONS NOTED.

There are no outstanding rejectable items in Unit 1.

The only rejectable items noted concerned surface indications which were subsequently removed and the affected area re-examined.

In addition, paragraph 2.0 of the report summarizes the loose bolts, nuts, and other miscellaneous indications detected.

ll.

ABSTRACT OF CORRECTIVE MEASURES RECOMMENDED AND TAKEN.

The only items requiring corrective action were surface indications which were removed by filing or light hand grinding and the affected area re-examined by the same method (PT or MT).

The loose bolting was tightened, the short weld was rewelded, the cotter pin replaced and the snap ring replaced.

Several repairs and replacements have been performed since commercial operations due to routine and correc-tive maintenance.

Work was performed in accordance with ASME Section XI and ANPP work control procedures.

All documents are maintained at ANPP.

WE CERTIFY THAT THE STATEHENTS lfADE IN TrIIS REPORT ARE CORPZCT.AND THE EXPZAINATIONS AND CORRECTIVE

~A1EARSUES TAKEN CONFORH TO THF. RULES OF THE ASiHE CODE, SECTION XI.

DATE SIGNED CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and P essure Vessel Inspectors and th State r Province of~2',

employed by of have in pected the components d scribed in thzs 01 RS REPORT during the period/2 tog 0

, and state.that to the best of my knowledge and.

belief, t e mme as performed examinations and taken corrective measures described in this OWNERS REPORT in accordance with the requirements of the ASHE Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and correc ive measures described in this OWNERS REPORT.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or con cted with this inspection.

INSPECTOR

~ ~~

CO?IHISSIONS t5 2 I~D 48 TRPB'at'l Boa d, State, Province DATE 0 Z 88 PA'CE 2

'UF

a I t

li/

,g

'I