Text

Safety Evaluation Supporting Amend 96 to License DPR-67
	ML17222A309
Person / Time
Site:	Saint Lucie
Issue date:	06/16/1988
From:	; Office of Nuclear Reactor Regulation
To:	;
Shared Package
ML17222A308	List: ML17222A307; ML17222A309;
References
	NUDOCS 8806290213
	Download: ML17222A309 (13)
	v • d • e

J g4$l AEQUI (4

P0 Cy Ct0 t

0 Cy

+a*++

t UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, OJ C. 20555 SAFETY EVALUATION BY THE OFFICE OF NUCLFAR REACTOR REGULATION RELATED TO AMENDMENT NO. 96 TO FACILITY OPERATING LICENSE NO.

OPP.-67 FLORIDA POMER A LIGHT COMPANY ST.

LUCIE PLANT, UNIT NO. I DOCKET NO. 50-335 INTRODUCTION By letter dated August 25, 1987 (L-87-354}, Florida Power and Light Company (FPKL or the licensee) proposed changes to the St. Lucie Unit I facility Technical Specifications to eliminate typographical errors, improve consistency, adiust nomenclature, and make minor changes.

The proposal was submitted to revise several valve tag and penetration numbers in the St. Lucie Unit 1 Technical Specifications Table 3.6-1, "Containment Leakage Path,"

and Table 3.6-2, "Containment Isolation Valves."

Certain valve tag numbers being changed are currently listed with generic valve numbers and do not include the seismic qualification identifier, or are shown as incorrect valve types.

EVALUATION The NRC staff has reviewed the licensee's submittal, dated August 25,

1987, and firds that the primary objective is to achieve a single document consistent with the as-built configuration of the plant.

The proposed changes are as follows:

1. ~14 I,~Y1 II

)

Check (!-V-15-1347) should read Check (I-V-15328).

This change corrects a generic valve designation to a plant-specific tag number.

Penetration 9, Valve Taq Number Check

( I-V-18-957) should read Check (I-V-18195).

This change corrects a generic valve designation to a plant-specific tao number.

880b290213 880bib PDR ADOCN, 05000335 P

P r

'l l

P I

1 I

Penetratior.

41, Valve Tag Number Gate (I-V-03-1307) should read Gate (I-V-07009).

This change corrects a generic valve designation to a plant-specific tag number.

Penetration 48 should read'8a, Valve Tag Number.

This more clearly identifies the penetration.

Globe

( I-FSE-27-01,02,03,04) should read Globe (I-FSE-27-1,2,3,4).

This change corrects a typographical variance from the Technical Specifications to the as-built tag identif<cation.

Globe (I-FSE-27-08) should read Globe (J-FSF.-27-8).

This change corrects a typographical variance from the Technical Specifications to the as-built tag identification.

3.

Pace 3/4 6-7 Penetration 48 should read 48c, Valve Tao Number.

Check (I-FSE-P7-1341) should read Check (I-Y-27101).

This change corrects a generic valve designation to a plant-specific tag number and more correctly identifies the penetration.

First Penetration 51 should read Slc.

This change more correctly reflects the as-bu".t conditions.

I d

<ant-specific tag number and more correctly identifies the penetration.

26.~lb Gate (I-V00140(1325)) should read Globe (J-V00140).

This chanoe corrects a misident'.fication in the original Technical Specifications and deletes unnecessary generic identification.

I 4

II I

I II

Gate (I-V-00143(1325)) should read Globe (I-V00143).

This change corrects a misidentification in the original Technical Specifications and deletes unnecessary generic identification.

5

. Gate (I-V00139(1322)) should read Globe (I-V00139).

This change corrects a misidentification in the orignial Technical Specifications and deletes unnecessary generic identification.

Gate (!-V00144!1322)) should read Globe (I-V00144).

This change corrects a misidentification in the original Technical Specif'.cations and deletes unnecessary generic identification.

Penetration 54, Yalve Ta Number Gate (I-V00101(612}) should read Ga.e (I-V00101).

This change deletes ur necessary generic identification.

Penetration 56, Valve Tag Number Gate (V-25-11) should read Gate

( I-V-25-11).

This change corrects nomenclature to include seismic category.

Gate (V-25-12) should read Gate (I-V-25-12).

This change corrects nomenclature to include seismic category.

Penetration 57, Yalve Tao Number Gate (V-25-13) should read Gate (I-V-25-13).

This change corrects nomenclature to include seismic category.

Gate (V-25-14) should read Gate (I-V-25-14).

This change corrects nomenclature to include seismic category.

~P/

Penetration 58, Valve Tag Number Gate (V-25-15) should read Cate (I-V-25-15).

This change corrects nomenclature to include seismic category.

a Gate (V-25-16) should read Gate (I-V-25-16).

This change corrects nomenclature to inciude seismic category.

Penetration Electrical Penetrations, Valve Ta Number "All primary canisters except welded spares" should read "All primary canisters and flanged electrical penetrations except welded spares."

This change provides greater completeness of electrical penetrations,

,although used only during startup and testing.

Valve Tag Number B.5.

I-'V-03-1307 should read I-V-07009.

This change corrects a generic valve designation to a plant-sperific tag number.

Valve Tao Number R.R.

I-FSE-27-1,2,3,4,8,10 should read I-FSE-27-1,2,3,4,8,11.

This change corrects a misidentification 'in the orignial Technical Specifications.

Penetration 48 should read 48a and 48c.

This change more accurately describes the penetration.

Valve Ta Number B.9.

I-FSE-27-5,6,7,9,11 should read I-FSE-27-5,6,7,9,10.

This change corrects a misidentification in the original Technical Specifications.

Penetration 51 should read 51a and 51c.

This change more accurately describes the penetration.

~/6-2 I-Y0014A(1325) should read I-V00140.