ML12227A710
| ML12227A710 | |
| Person / Time | |
|---|---|
| Site: | Browns Ferry  |
| Issue date: | 09/02/2010 |
| From: | GE-Hitachi Nuclear Energy Americas, Tennessee Valley Authority |
| To: | Office of Nuclear Reactor Regulation |
| References | |
| Download: ML12227A710 (143) | |
Text
Attachment 5 Examination Reports and Associated Records
Enclosure 5
Examination Reports and Associated Records
GERIS 2000 Examination SGE Nuclear Energy Summary Sheet Project: TVA, Browns Ferry Nuclear Plant, Unit 3 System: Reactor Pressure Vessel Weld ID: C-1-2 ASME Code Category:
B-A Calibration Sheets:
C-003 Supporting Data:
Examination Data Sheets E-04-00 thru E-04-33, Indication Data Sheets04-001 thru 04-040, Indication Evaluation Sheets, Screen Prints, Exam Patch Location Map, Exam Coverage Plots and GERIS 2000 Setup Records.
Examination Summary The ultrasonic examination of weld C-1-2 resulted in no recorded indications that exceed the allowable standards of IWB-3500, ASME Section XI, 1986 Edition, no Addenda.
The ASME Section XI required examination volume was examined with the GERIS 2000 System from the RPV inside surface utilizing Procedure No. GE-UT-700, Rev. 2. This examination was limited due to the Core Spray Downcomers at 7.50, 172.50, 187.5* and 352.50, Surveillance Specimen Holders at 30', 1200, and 3000 and the Jet Pump Diffuser configuration at 2100 and 2400. The total examination coverage was calculated to be 90%.
The GERIS 2000 utilizes an array of search units arranged to effectively examine the weld and adjacent base material parallel and perpendicular to the weld axis in two directions. The transducer package consisted of 00 longitudinal, 45* and 600 shear wave and 700 refracted longitudinal (RL) wave search units.
The GERIS 2000 recorded indications with the 70°RL scans and the 450 and 600 shear wave scans that were evaluated and found to be acceptable per the referencing Code section.
No manual supplemental examination was performed from the RPV outside surface due to access restrictions.
Fabrication records and previous examination results were reviewed prior to the completion of this examination summary.
GERIS Analyst:
Q
,ib 4.*
GE Reviewer:q w
L Q
b LEVEL:
DAT
/
LEVEL:
I DATE: I0-1b UTILITY Review:
..R.Rviw ANII Review:
TITLE:
~-DAT E: /
/9KTITLE:.A
~ u 1 DATE:
OO00'177 1 ' 7 \\ 4
GGERIS 2000 Examination SGE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Exam Data Sheet: E-04-00 Procedure No.: GE-UT-700 Revision No.: 2 FRR No.: N/A Patch Data Sh.
Date Start Stop Min X MaxX Min Y Max Y Disk No.
Examiner BF-095 E-04-01 10/23/93 0026 0129 11.25 51.00 245.00 276.00 85B JCG BF-096 E-04-02 10/22/93 2355 0009 51.00 65.50 245.00 260.25 85B JCG BF-097 E-04-03 10/1/93 0556 0610 65.75 80.00 245.00 260.25 16A JCG BF-098 E-04-04 10/1/93 0618 0659 80.00 103.75 245.00 276.00 16A JCG BF-099 E-04-05 10/1/93 0822 0908 104.00 131.25 245.00 276.00 16A ROF BF-100 E-04-06 10/2/93 0530 0625 131.50 164.25 245.00 276.00 16B JCG BF-101 E-04-07 10/2/93 0709 0805 164.25 197.00 245.00 276.00 16B ROF BF-102 E-04-08 10/2/93 0939 1034 197.25 229.75 245.00 276.00 17A ROF BF-103R E-04-09 10/19/93 1144 1216 230.00 247.00 245.00 276.00 70A ROF BF-104R E-04-10 10/19/93 1220 1235 247.25 262.75 245.00 260.25 70A ROF BF-105 E-04-11 10/19/93 1351 1405 263.00 278.00 245.00 260.25 70A ROF BF-106 E-04-12 10/19/93 1411 1443 278.00 295.50 245.00 276.00 70A ROF BF-107 E-04-13 10/19/93 1458 1552 295.75 328.50 245.00 276.00 70B ROF BF-108 E-04-14 10/19/93 2102 2151 328.50 356.00 245.00 276.00 72A JCG BF-109 E-04-15 10/19/93 2254 2346 356.00 386.00 245.00 276.00 72B JCG BF-110 E-04-16 10/20/93 0224 0319 407.00 440.00 245.00 276.00 73A JCG BF-111 E-04-17 10/20/93 0357 0433 440.00 459.75 245.00 276.00 73A JCG BF-112 E-04-18 10/20/93 0756 0843 465.00 492.75 245.00 276.00 76A ROF BF-113 E-04-19 10/20/93 0905 0959 492.75 525.50 245.00 276.00 76B ROF BF-114 E-04-20 10/20/93 1111 1201 528.00 558.25 245.00 276.00 17A ROF BF-115 E-04-21 10/20/93 1610 1711 558.50 596.25 245.00 276.00 17B ROF BF-116 E-04-22 10/21/93 2058 2151 591.50 624.00 245.00 276.00 81A JCG BF-17 E-04-23 10/22/93 0304 0338 624.25 642.75 245.00 276.00 81A JCG BF-118 E-04-24 10/22/93 0246 0300 642.75 657.00 245.00 260.25 81A JCG BF-119 E-04-25 10/22/93
.0429 0442 657.00 670.50 245.00 260.25 82A JCG BF-120 E-04-26 10/22/93 0449 0524 670.50 689.75 245.00 276.00 82A JCG Comments: BF-131, BF-I 32, BF-133 and BF-134 are supplemental scans for additional coverage.
Page 1 of 2 Limitations: BF-095, BF-109, BF-1 10 and BF-123 limited due to Core Spray Downcomers and X2 scan limit.
BF-096, BF-097, BF-1 04, BF-105, BF-118 and BF-119 limited due to Surveillance Specimen Brackets.
BF-111, BF-112, BF-113 and BF-1 14 limited due to Jet Pump Diffuser configuration and X2 scan limit.
Analyst: (Ki l
/K Reviewed By:
Level:
Date:
Level: 2
('"
Date: 17-1 I/q3 EXAM-M V.1 OnaM OS-042LS 00278 a0IF \\4 '
E NGERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Exam Data Sheet: E-04-00 Procedure No.: GE-UT-700 Revision No.: 2 FRR No.: N/A Patch Data Sh.
Date Start Stop Min X MaxX Min Y Max Y Disk No.
Examiner BF-121 E-04-27 10/22/93 0545 0638 690.00 722.50 245.00 276.00 82A JCG BF-122 E-04-28 10/22/93 0707 0753 722.75 750.00 245.00 276.00 82B ROF BF-123 E-04-29 10/22/93 0833 0920 750.00 778.00 245.00 276.00 85A ROF BF-131 E-04-30 10/27/93 0205 0223 11.25 16.25 240.50 278.25 107A JCG BF-132 E-04-31 10/27/93 0529 0540 380.00 385.00 240.50 260.25 107A JCG BF-133 E-04-32 10/27/93 0558 0608 407.00 412.00 240.50 260.25 107A JCG BF-134 E-04-33 10/27/93 0627 0646 773.00 778.00 240.50 278.25 107A JCG Comments: BF-1 31, BF-1 32, BF-1 33 and BF-1 34 are supplemental scans for additional coverage.
Page 2 of 2 Limitations: BF-095, BF-109, BF-1 10 and BF-123 limited due to Core Spray Downcomers and X2 scan limit.
BF-096, BF-097, BF-1 04, BF-1 05, BF-1 18 and BF-1 19 limited due to Surveillance Specimen Brackets.
BF-111, BF-112, BF-113 and BF-114 limited due to Jet Pump Diffuser configuration and X2 scan limit.
Analyst:C( 2 Reviewed By:
0
ý.
Level:
Date: 14419_7 Level:
- 2T Date: M' I 3tqk EXAM.DSI VA1 9128193 DS-04,XLS 00279
-ZOiF k'4 ý
Q2 \\115 0
GE Nuclear Energy GERIS 2000 Examination Data Sheet
'a Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-01 Patch ID: BF-095 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet Channel Angle Direction 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP 1
04-012 04-011
~
~
~
45 RS 180 DN 1
04-013 04-014 04-015 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Comments:
N/A Data Sheet Codes: G-XXX: "G" = Geometry ( may be tvoical. 6-XXX: "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst: (j,.
Reviewed By:
Level:
Date:
Level:
M "i
Date:.7_/I2 Z
3 EXAý-DS2 VA1 912M(93 E-01*X1
- 01. 1210/93
ý:0 ? 18 1 4,o
~4
GGERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-02 Patch ID: BF-096 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "T" = Weld Sequence, XXX = Sheet Number Indication Codes: I Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:(
/:
.4 Reviewed By:
Level:
Z
~
Date:
Level:
)
%LDate: j j
J EXAM082 V.1 9128193 t~. ii5&2&t E; 3F v 4 ý
q ý 1-5"ý GERIS 2000 Examination GE Nuclear Energy Data Sheet Project:
Weld ID:
Cal. ID:
TVA, Browns Ferry, Unit 3 C-1-2 C-003 Exam Data Sheet No.:
Patch ID:
Ind. Data Sheet Series:
E-04-03 BF-097 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Channel Angle Direction Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet I
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6 = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
" A/Z ReviewedB*
C.
Level: *.
Date:
Level:
Date:
b1 EXAM-082 V.1 O/2893 E0ý1 0 2
8
GGERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-04 Patch ID: BF-098 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN 1
04-017 04-018 04-019
~
10 45 RS 270 CCW NRI 11 60 RS 0 UP 1
04-016 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst: C4 A Reviewed By:
Level:
Date: I/-I/"..,
Level: 2 Date: 1Iu-[3/[
EXAM-S V.1 9120193 11
Q *1<<;
~2 ti'~
0 GE Nuclear Energy GERIS 2000 Examination Data Sheet I
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-05 Patch ID: BF-099 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:C
/12---
ReviewedB, Level:
Date:
Level: L Date:
I 1_Z Iz 19 EXAM.0S2 VA1 9128193 4~ E4~~$4 t3 GI
\\(4 \\
I).
1ZI IS
'U 0
GE Nuclear Energy GERIS 2000 Examination Data Sheet
.1 Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Channel Annie Direcition Exam Data Sheet No.: E-04-06 Patch ID: BF-100 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Ind.
Data Sh.
Ind.
Data Sheet 1
0nWM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 ON NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 ON NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 ON NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface. 3 = OD Attachment, 4 = Nozzle, 5 = Other Analys t :C*f k*,
ReviewedB g--
/. /2 A
Level:
Date: /_Z/0V Level: T Date:
I.,
1
-3
- e3 EXAM-D82 VA 91SOM3 EXAM-DSZ V.)
9IUI~3 E ~
9 of- \\(4\\
\\4<;
9~
Y 0
GE Nuclear Energy GERIS 2000 Examination Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-07 Patch ID: BF-101 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP 1
04-020 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6' = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
ReviewedB:.
/B-Level:
7 Date: /Zf/D47V-Level: -
Date:
EXAM-D3Z VA1 9/26M3 HZ8 6
!J J Y
0 GE Nuclear Energy GERIS 2000 Examination Data Sheet i
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Ind.
Exam Data Sheet No.: E-04-08 Patch ID: BF-102 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:(.
A,2 Reviewed By:
Level:
D Date:
Z~w /%7 Level:
I Date:
.13 193 EX
.-OS2 V-1 91281S3 04 LS 14287
\\\\
oF-q
1Z 15S a
GE Nuclear Energy GERIS 2000 Examination Data Sheet
.1 Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-09 Patch ID: BF-103R Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 W M N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:r/ L
/-,4 Reviewed B,...
B.-
Level:
Date:
/Z-.,*o//
Level:
Date: 1-11 qA EXAM-DS2 VA 9/28/93 o
a J "<
a GE Nuclear Energy GERIS 2000 Examination Data Sheet
.1 Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-10 Patch ID: BF-104R Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Ind.
Ind.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 OW N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI
~
16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analys t : C6?
Reviewed B Qk*
Q-A Level:
j Date: /__,_____,
Level:
1 Date:
\\VZ I 3 H3 EodtXLSi~L2 9 EXAM-OS2 V.1 0128/3
\\20
\\(-C)F N
p 1 1 5-ý GE GERIS 2000 Examination GE Nuclear Energy Data Sheet Project: IVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-11 Patch ID: BF-105 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Channel Angle Direction Ind.
Data Sh.
Daa Sh.
Data Sh.
Data Sh Ind.
Data Sheet 1
0 WM N/A NRI 2
0WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
st:_
___Reviewed By:
Level: MZ.
Date:
IZ____/___
Level: "
Date: tZ 113 /73 EXA-"S2 V.1 9/2/SM3 EXAM-DS2 Vj*:XL 1fal "ot~~1*~
90 1(4 OF M ý
U 0GE Nuclear Energy GERIS 2000 Examination Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-12 Patch ID: BF-106 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sheet Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst: C
/
,/4 Reviewed By:
.-Q,-.
Level:
E Date:
/.//
Level:
3 Date: 1 -- 1 3'.
3 EXAM-052 V.1 9M28/93
~iz4&,~9 I
~
'~'A\\
GENuler negyGERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-13 Patch ID: BF-107 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Channel Angle Direction Ind.
Data Sh.
Data Sh.
Data Sh.
Ind.
Ind.
Data Sh.
Data Sheet 1
0 W M N /A N R I 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
04-021 9
45 RS 180 DN 1
04-022 04-023
~
10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = 00 Attachment, 4 = Nozzle, 5 = Other Analyst: Q Reviewed By: %
Level:
Date:
Level:
Date: 1Z 113 P1, VX.DS W.
928/93 12492 0ý 4I
GE GERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.:
Patch ID:
Ind. Data Sheet Series:
E-04-14 BF-1 08 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 W M N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6 = Weld Sequence, XXX = Sheet Number Indication odes:1@ = Flaw 2 = On -Q,--*
= A~n Afif-h-~f A = M-1 r = Atfh~.
Analyst:C Z
/
Reviewed By:
Level:
Date: /Z/0/9/7_
Level: Z Date: IZ 11'6 EXAM.D$2 VA1 9/28M3
GENuler negyGERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Channel Angle Direction Ind.
Exam Data Sheet No.: E-04-15 Patch ID: BF-109 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN 1
04-024 04-025 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
/Vte 1
Reviewed By::
Level:
Date:
jZW/-
Level: -_XLDate: 1A2 1L3..13 EXAM-DSZ V.1 9/25193 11,00294
\\ 6 )- N
0 GE Nuclear Energy GERIS 2000 Examination Data Sheet
.1 Project: TVA, Browns Ferry, Unit 3 Weld lD: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-16 Patch ID: BF-110 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN 1
04-026 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN 1
04-027 04-028
~
~
~
10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN 1
04-029 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G"
= Geometry ( may be typical), 6-XXX; "6" =Weld Sequence, XXX =Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst: C2( A A4 Reviewed By:
Level: -- ZL7 Date: IZAIV/S Level: 2
- ZDate:
17-116 i.19 EXAM.OS2 V.1 9/20193 e*&
22-
\\\\ (5 r-N
0 GE Nuclear Energy GERIS 2000 Examination Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-17 Patch ID: BF-111 Ind. Data Sheet Series: 04-XXX Ind.
Channel Angle Direction Ind.
Data Sh.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN 1
04-030 6
70 RL 270 CCW NRI 7
45 RS 0 UP 1
04-031 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface. 3 = OD Attachment 4 = Nozzle 5 = Other Analyst:
A Reviewed By:
Level: 3222 Date:,/t__-
Level:
Date: \\2 j1j
/q,3
.- OQ,0296 EXAM-0S2 V.1 9128,'3
(2 1 1-; -!ý 2~
GE Nuclear Energy GERIS 2000 Examination Data Sheet I
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-18 Patch ID: BF-112 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Channel Angle Direction Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments:
Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence. XXX = Sheet Number Indication Codes: I = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analystk*
ReviewedB Level: Z j
Date: /?./,o/3 Level:
I Date:
EXAM-DS2 VA 918/9M3 D-~ or C\\7AM
21 1 Is.,
a GE Nuclear Energy GERIS 2000 Examination Data Sheet
.1 Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Anale Direction Exam Data Sheet No.: E-04-19 Patch ID: BF-113 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 W M N/A NRI 3
70 R L 0 U P N R I 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP 2
04-032 8
45 RS 180 DN 1
04-033 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: I = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
/-A" Reviewed By:
Level:
Date:
Level:
Date:
EXAMDSZ2 V.1 MOWI~
E-,s Q.2.98 Da2 or \\'A\\
Ix~ '
~
J 0
GE Nuclear Energy GERIS 2000 Examination Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-20 Patch ID: BF-114 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Ind.
Ind.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN 1
04-034 04-035 04-036
~
~
10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
Reviewed By:
Level: J
~
Date:
Level:
=3I Date: 1Z 17, 111 EXAM-OS2 V.1 9128193 i-120 9
al OF L
I a
GE Nuclear Energy GERIS 2000 Examination Data Sheet
'I Project: TVA, Browns Ferry, Unit 3 Weld lD: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-21 Patch ID: BF-115 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 VWM N/A NRI 3
70 RL 0 UP 1
04-039 4
70 RL 90 CW NRI 5
70 RL 180 DN 1
04-040 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW 1
04-037 11 60 RS 0 UP 1
04-038 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; 6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
Qj-A-
ReviewedB*
e.
Level:
j Date: /1-//0*
Level:
Z Date: j[--j3jf.3 EAAM-S2 VA1 912193
~of.)O
Q 5:
U.
0 GE Nuclear Energy GERIS 2000 Examination Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-22 Patch ID: BF-116 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 R L 0 U P N R I 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RIL 270 CCW NRI 7
45 RS 0 UP 2
04-001 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
Reviewed By :
0,
.1 Level:
.227 Date:
Level:
Date:
113 E9AM-OS VA) 9120193 O00301 E-04-22.XLS 12/10/93 oS~\\A
I.
V 0
GE Nuclear Energy GERIS 2000 Examination Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-23 Patch ID: BF-117 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP 2
04-002 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
Reviewed By:
0 Level:.
Date:..//_*
L/,
Level:
Date:
1"1.3 h-3 z~O ?
ýý I I 0GE Nuclear Energy GERIS 2000 Examination Data Sheet L
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-24 Patch ID: BF-118 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Ind.
Ind.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: I = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
)
/
Reviewed By:
Q.
A Level:
r_
Date:
/Z/_/____
Level:
Date:
3 EXAM.DS2 V.A 9128193
~~OO~O 3 27M O' \\-k
Q, 1,5 -,
p GE Nuclear Energy GERIS 2000 Examination Data Sheet I.
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Exam Data Sheet No.: E-04-25 Patch ID: BF-119 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet Channel Annie Dire ction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX: "G" = Geometry ( may be tyoical). 6-XXX' "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:C
- A7 Reviewed By:
Level: -:Za-Date:
Level:
Date: A2Jil53 it-o 0.O~3O0 4 EXAM-DSZ VA1 9120/93 a'ý' 0 ý- \\ H ý
Q? I 15 1i V
GE Nuclear Energy GERIS 2000 Examination Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-26 Patch ID: BF-120 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Channel Angle Direction Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 M N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN 1
04-003 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN 1
04-004 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:*)
Reviewed By:
e, [
-2 Level:
Date: /Z_______
Level:
V Date:
,Z EAAM-OS2 V.1 9M2OW93 E-0;28.XL a oF 5 ý q
GERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-27 Patch ID: BF-121 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh,.
Data Sh.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst: C(.ýc
/VA'*
Reviewed By:
Level: :'
Date:
Level:
_____U Date:
-1 1, ku EXAM-052 V.1 2128/93 EXAM.OSI~~~4, V. I2.3 JaE42Loa4o 6 0ýc o
9 1141 15 GE Nuclear Energy GERIS 2000 Examination Data Sheet I
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 W M N/A NRI 3
70 RL 0 UP 1
04-005 4
70 RL 90 CW NRI 5
70 RL 180 DN 1
04-006 6
70 RL 270 CCW NRI 7
45 RS 0 UP 1
04-007 8
45 RS 180 DN 1
04-008 10 45 RS 270 CCW NRI 11 60 RS 0 UP 1
04-009 12 60 RS
04-010 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: NIA Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
G& _
Y Reviewed By:
Level:
a Date:,Z____
Level:
Date: 1-. 113 P..
EX~SLOJ07 EXAM-DS2 VA.12SM3fl
-& 0'F N4
a GE Nuclear Energy GERIS 2000 Examination Data Sheet
'a Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-29 Patch ID: BF-123 Ind. Data Sheet Series: 04-XXX Ind.
Channel Angle Direction Ind.
Data Sh.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:(
' A Reviewed By:
\\Q Level: :2 j
Date: /.AA3 Level:
Date:
EXM-OS2 V.1 9/l2SM3
+;i").
S 13
GGERIS 2000 Examination GE Nuclear Energy Data Sheet Project: VA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Exam Data Sheet No.: E-04-30 Patch ID: BF-131 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Channel Angle Direction Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:
(' Qe 1/
Reviewed By:
Level: j~j Date:
____Level:
a
- _ tDate:
1 I1: 0.)q3 EXAW*OS2 V.1 9120193 E-04-30.AL$ 12:/10193
~2 v~i~
U (a
GE Nuclear Energy GERIS 2000 Examination Data Sheet I
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Channel Angle Direction Exam Data Sheet No.: E-04-31 Patch ID: BF-132 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet 1
0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:,
/1*,9_
Reviewed By:
Level:
j Date:
___/_'/o Level: "
-Date:
-L. 1i1 3b3 EXAM-082 VA1 BMW15 00310 E-04-31XS I as5/03 Sq 0o-V4
I II 2-1 1x§ -*
GERIS 2000 Examination GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Exam Data Sheet No.: E-04-32 Patch ID: BF-133 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry (may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: I = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other Analyst:(2 L?
/Z
,,l Reviewed By:
Level: -
Date: /_____
Level:
Date: 1z2. h1a IT?
EXAM.S2 VA1 9126103 00311 E-04-32.XLS 121010M3 5o ý \\ (
a GE Nuclear Energy GERIS 2000 Examination Data Sheet
.1 Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-33 Patch ID: BF-134 Ind. Data Sheet Series: 04-XXX Ind.
Ind.
Ind.
Ind.
Ind.
Data Sh.
Data Sh.
Data Sh.
Data Sh.
Data Sheet Channel Angle Direction Ind.
1 0 WM N/A NRI 2
0 WM N/A NRI 3
70 RL 0 UP NRI 4
70 RL 90 CW NRI 5
70 RL 180 DN NRI 6
70 RL 270 CCW NRI 7
45 RS 0 UP NRI 8
45 RS 180 DN NRI 10 45 RS 270 CCW NRI 11 60 RS 0 UP NRI 12 60 RS 90 CW NRI 13 60 RS 180 DN NRI 14 60 RS 270 CCW NRI 15 0 BM N/A NRI 16 0 BM N/A NRI Comments: N/A Data Sheet Codes: G-XXX; "G" = Geometry ( may be typical), 6-XXX; "6" = Weld Sequence, XXX = Sheet Number Indication Codes: 1 = Flaw, 2 = OD Surface, 3 = OD Attachment, 4 = Nozzle, 5 = Other AnalystC(
/p 6 Reviewed By:
Level:
L Date:
Level:-
Date: 12-l3 11.S EXAM-OS) V.1 gfl2fl3
" 00312 E-.0433.OLS 12110193
i.J V
I I.~J.
A 0
GE Nuclear Energy GERIS 2000 Indication Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Indication: 04-001 Exam Data Sheet No.: E-04-22 Patch ID: BF-116 Ind. Data Sheet No.: 04-001 Channel: 7 Angle:
45 Direction: 0 205%
Amp.
X Min Y 50%
MP Min Y
@ Max MP Y
50%
Max Y 20%
627.21 247.55 9.15 100.0%
627.46
~
247.30 9.39 247.55 9.21 248.05 8.79 155.1%
627.71
~
248.80 9.80 247.55 9.19 248.05 8.79 199.5%
627.96 247.05 9.59 247.55 9.19 248.05 8.79
~
199.5%
628.21
~
~
247.05 9.58 247.80 9.34 248.05 8.77 175.8%
628.46 247.05 9.61 247.80 9.01 248.05 8.80 113.4%
628.71
~
~
247.30 9.40 247.80 9.01 248.05 8.76
~
94.0%
628.96
~
247.30 9.34 247.80 8.98 248.50 8.79
~
Comments:
OD surface indication.
No apparent tip signals.
2,17 dB below notch sensitivity.
Evaluated to notch sensitivity assigned thruwall dimension
=2%T.
TW 0.127 L=
1.75 5=
0.00 Analyst:c 7~,/7
~
Reviewed By:
Level:
~Date:
/,
/,9 Level:
Date:
2 EXAM'083 V.2 10122J93 I2V11/9304-001.XL.
00313
'-,7ov NC4\\
!.j-GGERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-116 Exam Data Sheet No.: E-04-22 Ind. Data Sheet No.: 04-001 Indication: 04-001 Flaw Thruwall Dimension =
Flaw Length "i" =
Separation with clad "S" =
Surface Separation "So =
0.127 1.75 N/A 0.00 T nominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-351 0-1 ASME Section XI, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2 2.09 2.34 Y 0.10 2.20 2.5 0.15 2.50 2.9 0.20 2.80 3.3 0.25 3.30 3.8 0.30 3.80 4.4
~
0.35 4.40 5.1
~
0.40 5.00 5.8 0.45 5.10 6.7 0.50 5.20 7.6
~
Allowed Allowed 2.09 0.00 a/l value =
y=
0.127 0.073 0.000 Flaw is Surface
- Allowed a/t =
aft =
2.09%
1.99%
AComments.
Evaluated to notch sensitivity assigned thruwall dimension = 2%T.
ECAM-M04 V.1 1W193 IWBO4001 LSi211113 00314
?f6ý' ý 4
.~.
GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-23 Patch ID: BF-117 Ind. Data Sheet No.: 04-002 Indication: 04-002 Channel: 7 Angle:
45 Direction: 0 20%
Min Y 50%
MP Min Y
- Max MP Y
50%
20%
Amp.
X MP Max Y MP Max Y MP Remarks 50.1%
629.21 247.80 12.70 36.6%
629.46 247.80 12.70 50.1%
630.71 248.05 12.45 64.5%
630.96 248.30 12.18 248.05 12.47 247.80 12.75
~
73.1%
631.21 248.30 12.18 247.80 12.78 247.55 13.04 73.2%
931.46 248.05 12.47 247.80 12.78 247.55 13.04
~
88.7%
931.71 248.05 12.47 247.80 12.78 247.55 13.04 247.80 12.70 Comments: OD surface indication. Continuation of 04-001.
No apparent tip signals. 10.87 dB below notch response.
Evaluated to notch sensitivity assigned thruwall dimension = 2%T.
TW=
0.127 L=
1.75 S
0.00 Analyst: C Reviewed By:
Level:
Date:
__-_/__-_
Level: "h Date: \\2-\\t3 N3 0 V.2 1 0/2 13 0 0 3 1 5 V2/
11 9304-OO2.XLS
\\(fl1 14
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-117 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-23 04-002 04-002 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "" =
Separation with clad "S" =
Surface Separation "S" =
0.127 1.75 N/A 0.00 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-351 0-1 ASME Section X1, 1986 Edition TABLE IWB-351 0-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
0.05 2.00 2.2 2.09 2.34 Y 0.10 2.20 2.5
~
0.15 2.50 2.9 0.20 2.80 3.3 0.25 3.30 3.8 0.30 3.80 4.4 0.35 4.40 5.1
~
0.40 5.00 5.8 0.45 5.10 6.7
~
~
0.50 5.20 7.6 Allowed Allowed 2.09 0.00 ale a/I value=
y=
0.127 0.073 0.000 Flaw is Surface Allowed a/t =
a/t =
2.09%
1.99%
Comments:
Evaluated to notch sensitivity assigned thruwall dimension = 2%T.
EX.A-0DS4 VA 1OI3/g3 W804ooiVsI2111/93 00316
'40 0ý Ný4
0 lI -ý -
GE Nuclear Energy GERIS 2000 Indication Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Date Sheet No.: E-04-26 Patch ID: BF-1 20 Ind. Data Sheet No.: 04-003 Indication: 04-003 Channel: 5 Angle:
70 Direction: 180 20%
Min Y TOF Min Y Amp.
x
- Max Y
50%
Max Y 20%
TOF Max Y TOF TOF TOF Remarks 36.7%
670.35 262.45 28.96 60.6%
670.60 261.95 25.12 262.45 29.04 262.95 32.96 44.3%
670.85 261.95 25.60 262.20 27.20
~
262.95 32.56
~
~
~
/
~
~~
Comments: No apparent tip signals.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
Analyst: ( J L
Reviewed By:
Level:
-7z"-
Date:
_____19-Level: ~fZDate:
17-1131-u EXAM&D83 V.2 102M93
.4 00317 12J11I9304-O3XLS Lý 0
\\w
G GERIS 2000 Indication GE Nuclear Energy Data Sheet Project, TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indlcetion: 04-004 Exam Data Sheet No.: E-04-26 Patch ID: BF-120 Ind. Data Sheet No.: 04-004 Channel: 13 Angle:
60 Direction: 180 20%
50%
@ Max 50%
20%
Amp.
MP Max Y MP Max Y MP Remar*s I
Comments: This indication also seen with Ch. 5 (see 04-003).
No apparent tip signals.
Thruwall size determined by Reg. Guide 20% beam spread corrected method.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
TW =
0.00 L
0.75 S =
1.25 with clad Analyst: C a;
!"b Reviewed By:
Level:
-j.V Date:
Level:
Date: \\- 1i-I93 EXAM-0S3 v,2 102213 00318 21/9C4.t 12/111/930004--AL.tS
0 1 1 lltý-1:11 GGERIS 2000 Indication GE Nuclear Energy Data Sheet Project TVA, Browns Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-005 20%
Amp.
X Min Y s Ferry, Unit 3 Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet No.: 04-005 Channel: 3 Angle:
70 Direction: 0 SO%
@ Max 50%
20%
TOF Min Y TOF Y
TOF Max Y TOF Max Y TOF Remarks Comments: No apparent tip signals.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
TW=
0 L=
0.25 s =
1.2 Analyst
,2.
Reviewed B y:
5
_i-*
Level:
-1 Date: /?/0/-
Level:
Date: V-"
Jq EXAM'O83 V.2 10/22193 1 2/11930O4-w.XLS 00319 41 'ov
\\\\
1:d GE GERIS 2000 Indication GNuclear Energy Data Sheet Project TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-006 Chann 20%
WA Amp.
X Min Y TOF Min Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet No.: 04-006 el: 5 Angle:
70 Direction: 180
@ Max 50%
20%
Y TOF Y
TOF Max Y TOF Max Y TOF Remarks Comments: No apparent tip signals.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
TW=
0 L=
0.25 S=
1.33 with clad Analyst: 6
/*Z
- Reviewed By:
Level:
Date:
Level:
3-Date: \\7. b\\
)q3 EXAI.....
V.2 10/22M13 0 03 0320 12I/111304.006.XI.S LfM Ol
\\(-A\\
0 1 <:
GE Nuclear Energy GERIS 2000 Indication Data Sheet we India~
oJec-TVA, Browns Ferry, Unit 3 id ID: C-1-2 ul ID: C-003 dton: 04-007 Chann 20%
50PA X
Min Y MP Min Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet No.: 04-007 Direction: 0 eI. 7 Y
Angle:
45 Amp.
@ Max MP Y
50%
MP Max Y 20%
MP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW 0.24 L=
0.75 S=
1.73 with clad Analyst:
(-
/*J Reviewed By:
Level:
.V Date:
,,/ /2,.
Level:
Date: IVZ I131q.3 EXAM-..0 V.2 10122/93 1211119304-007.XLS 00321 L4"'- OF \\L4\\
____R k 15;5 GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-122 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-28 04-007 04-007 6.38 0.19 Flaw Thruwalf Dimension =
Flaw Length "I" =
Separation with clad "S" =
Surface Separation "S" =
0.24 0.75 1.73 1.54 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-351 0-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2
~
0.10 2.20 2.5
~
0.15 2.50 2.9 2.56 2.98 Y 0.20 2.80 3.3 0.25 3.30 3.8 0.30 3.80 4.4 0.35 4.40 5.1 0.40 5.00 5.8
~
0.45 5.10 6.7 0.50 5.20 7.6 Allowed Allowed 2.56 2.98 a-a/l value =
Y=
0.120 0.160 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.98%
1.88%
Comments:
EXAW-O*, V.1 l0PrM3 IW04M?.T.YSt*12/1/$
00322 4J4(~c O'jk
GERIS 2000 Indication GE Nuclear Energy Data Sheet Project TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet No.: 04-008 Indication: 04-008 Channel: 9 Angle:
45 Direction: 180 20%
Min Y Amp.
x 50%
MP Min Y
@ Max MP Y
50%
MP Max Y 20%
726.15 259.75 1.80 28.6%
726.40 295.50 1.70
~
260.00 1.99
~
260.25 2.14 25.2%
726.65 260.00 2.04 Comments: No apparent tip signals.
Thruwall size determined with Reg. Guide 20% beam spread corrected method.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
TW=
0.00 L=
0.50 S
1.40 with clad Analyst:
R Dt Reviewedl:
y:
Level:..... ý Date: 1411; LeveV:: :
Date: %-Z(- 1q~'l 3.
EXAM-D63 V.2 10/22/93 00323 1211119304-OUA.LS
a GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Indication: 04-009 Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet No.: 04-009 Channel: 11 Angle:
60 Direction: 0 20%
Min Y M0%
MP MIn Y Amp.
X
@ Max MP Y
50%
MP Max Y 20%,
744.35 257.05 3.64 38.7%
744.60 256.55 4.05 257.30 3.45
~
2568.08 2.94
~
28.6%
744.85 257.30 3.57
-~*
~
~
~
-~--
-~-~~
~
- ~
~~
- ~
- ~
~
Comments: No apparent tip signals.
Thruwall size determined by the Reg. Guide 20% beam spread corrected method.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
TW=
0.00 L=
0.50 S=
1.73 with clad Analyst: C
//14-Reviewed By.
Ll, Z4 Level:
Date:
Level: Z Date: ail
\\I'6 EXAI.$OS3 V.4 10122193 0 32
-1:
o 12/11/93D4-009.XLS
TZ ý1z ý
\\W
)j GE Nuclear Energy GERIS 2000 Indication Data Sheet I
ProJecL TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-28 Patch ID: BF-122 Ind. Data Sheet No.: 04-010 Indication: 04-010 Channel: 13 Angle:
60 Direction: 180 20%
Amp.
X Min Y 50%
MP Min Y
@ Max MP Y
50%
MP Max Y 20%
731.79 260.45 2.49 30.8%
732.04 260.20 2.30 260.45 2.49 260.70 2.89 50.2%
732.29 259.95 2.08 260.20 2.26 260.70 2.78 44.3%
732.54 259.95 2.08 260.20 2.23 260.45 2.44 16.3%
732.9 260.20 2.23 30.4%
733.04 260.45 2.44 26.9%
733.29 260.20 2.26 18.5%
733.54 260.20 2.30 Comments: No apparent tip signals.
Thruwall size was determined by the Reg.Guide 20% beam spread correction method.
TW =
0.00 L=
1.75 S =
1.13 with clad Analyst: Ce A1ýf Reviewed B Level:
Date:
Level:
X Date: r7-1i 2t13 EXAM-053 V.2 10/Z2/93 IXAM.QS3~~~~4-00325I 11 l924OO.
t 2J SII/4"OIO.XLS LA<ý 01F kLA\\
I*
Iz t)5 GNu c GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-01 Patch ID: BF-095 Ind. Data Sheet No.: 04-011 Indication: 04-011 Channel 7 Angle:
45 Direction: 0 20%
5000 Max 50%
201A Amp.
MP Max Y MP Max Y MP Remarks Comments: Thruwall size was determined by the PATT technique.
TW=
0.24 L=
1.00 S=
1.73 with clad Analyst: C (
/*
Reviewed By:
Q Level:
Date:
/Z./a1'9-Level:
- Date: iz I %v la 3 EXAM-093 V.2 10122193
¶2J111904"011.Xns 0!-
00326 §Q or*
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-095 Exam Data Sheet No.: E-04-28 Ind. Data Sheet No.: 04-011 Indication: 04-011 Flaw Thruwall Dimension =
Flaw Length "r =
Separation with clad "S" =
Surface Separation "So =
0.24 1.00 1.73 1.54 Tnominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2
~
0.10 2.20 2.5 2.32 2.66 Y 0.15 2.50 2.9
~
0.20 2.80 3.3 0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1
~
0.40 5.00 5.8 0.45 5.10 6.7 0.50 5.20 7.6
~
Allowed Allowed 2.32 2.66 al =
all value=
y=
0.120 0.120 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.66%
1.88%
Comments:
MAM-OS4 V.1 1G3i3 WVBUI1.XLS12/I I93 00327 Sk O- \\L4\\
I i**i i*~I
~2 ~'155 GE GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-01 Patch ID: BF-095 Ind. Data Sheet No.: 04-012 Indication: 04-012 Channel: 7 Angle:
45 Direction: 0 20%
500A
@ Max 509A 20%
Amp.
MP Max Y MP Max Y MP Remarks Comments: Recorded at less than required level to show aligned reflectors.
Indication has no determinable length or thruwall dimension and is acceptable to IWB-351 0-1.
Analyst: CJ.2/ýc Reviewed By Level:
Date: /Z4/9.7 Level: T
~
Date:
2-L 11 19k3 EXAM-DS3 V.2 10122J93
° 00328 12J11/S304-O12.XLS SDGF c
- .*,~
j GE Nuclear Energy GERIS 2000 Indication Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-01 Patch ID: BF-095 Ind. Data Sheet No.: 04-013 Indication: 04-013 Channel: 9 Angle:
45 Direction: 180 20%
Amp.
X Min Y 50%
MP Min Y
@ Max MP Y
50%
MP Max Y 20%
11.40 263.50 5.74 Comments: No apparent tip signals.
Indication has no determinable lenath or thruwali dimAn~inn andl is accepntable to IWR-351 0-1 Analyst:(*2
//4 Reviewed By:
Level:.
Date:
17,_____93 Level:
I Date: 17-113931 EXAM-DS3 V.2 10122/3
"' 00329 12/11/2304013.XLS 5S?,OF \\tA\\k
1.-i 3
U 0
GE Nuclear Energy GERIS 2000 Indication Data Sheet I
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-01 Patch ID: BF-095 Ind. Data Sheet No.: 04-014 Indication: 04-014 Channel: 9 Angle:
45 Direction: 180 20%
MIn Y 50%
MP Min Y
@Max MP Y
50%
MP Max Y 20%
MP Max Y Amp.
X MP Remarks 8.7%
11.40 2r3.75 7.35 Comments: No apparent tip signals.
Indication has no determinable length or thruwall dimension and is acceptable to IWB-351 0-1.
Analyst: r*a A
Reviewed By:
Level:
"21 Date:
Level:
-Date:
rZ It 113 00330 EXAM-D94 V.2 MUM22,9, 12JI1119304-014 XLS 5MjoE \\(A\\
P SGE Nuclear Energy GERIS 2000 Indication Data Sheet I.
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Indication: 04-015 Exam Data Sheet No.: E-04-01 Patch ID: BF-095 Ind. Data Sheet No.: 04-015 Channel: 9 Angle:
45 Direction: 180 20%
Amp.
X MIn Y 50%
Min Y
@Max MP Y
50%
MaxY 20%
MP Max Y MP MP MP Remar*s 3.9%
28.15 262.25 5.39 7.7%
28.40 262.00 5.20
~
PATT 8.7%
28.65
~
~
262.00 4.83 5.6%
28.90 262.00 4.92
-~~
C.omments: I nruwall size was determined by the PAlT technique.
TW=
0.23 L=
0.75 S
3.07 Analyst:"jQ
/IVZ Q ReviewedIBy:
Level:
Date:
Level:
Date: 1Z EXA"3 V.2 10/22/9}3 12/12/*ll4-15 XL 00331
[GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-095 Exam Data Sheet No.: E-04-22 Ind. Data Sheet No.: 04-015 Indication: 04-015 T nominal =
6.38 Clad T nominal =
0.19 Flaw Thruwall Dimension =
Flaw Length "I"=
Separation with clad "S" =
Surface Separation "S" =
0.23 0.75 N/A 3.07 Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" all Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
~
0.05 2.00 2.2
~
~
0.10 2.20 2.5
~
0.15 2.50 2.9 2.52 2.93 Y 0.20 2.80 3.3 0.25 3.30 3.8 0.30 3.80 4.4
~
~
0.35 4.40 5.1 0.40 5.00 5.8
~
0.45 5.10 6.7
~
~
0.50 5.20 7.6 Allowed Allowed 2.52 2.93 alue a/I value=
Y=
0.115 0.153 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.93%
1.80%
Comments:
EXAMOS4 VA 1 I./l rMlxIIIf
ý' 00332 00332 (Q OF \\L4kk
i*~i GGERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-01 Patch ID: BF-098 Ind. Data Sheet No.: 04-016 Indication: 04-016 Channel. 11 Angle:
60 Direction: 0 20%
50%
@ Max 50%
20%
Amp.
MP Mar Y MP Max Y MP Remarks Comments: No apparent tip signals.
Comments: No apparent tip signals.
Indication has no determinable length or thruwall dimension and is acceptable to IWB-351 0-1.
Analyst: C
./A Reviewed By.
Level:
i Date:
_Z____r Level:
Date: \\%Z-II EXMAWD83 V.2 10/22193 12111/9304-010.XLS 00333
-5i or
V,1Il
ý 0
GE Nuclear Energy GERIS 2000 Indication Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 Cal. ID: C-003 Exam Data Sheet No.: E-04-04 Patch ID: BF-098 Ind. Data Sheet No.: 04-017 Indication: 04-017 Channel: 9 Angle:
45 Direction: 180 20%
Amp.
X Min Y 50%
Min Y a Max MP Y
50%
MP Max Y 20%
81.40 263.75 5.46 20.9%
81.65 263.75 5.40 SPOT 19.6%
81.90 264.00 5.60 15.3%
82.15
~
264.00 5.60 Comments: Thruwall size was determined by the SPOT technique.
TW =
0.34 L =
0.75 S
2.61 Analyst:
R(j,
,/'2*
Reviewed By:
Level:
Date:
Level:
I Date: I.-I1*
ýq1 EXAW-0S3 V.2 10/22193 to00334S8 12/1119304"017.XnS OV
\\L4.
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-098 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-04 04-017 04-017 6.38 0.19 Flaw Thruwail Dimension =
Flaw Length "I" =
Separation with clad 'S" =
Surface Separation "S" =
0.34 0.75 N/A 2.61 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-3510-1 ASME Section X1, 1986 Edition TABLE IWB-351 0-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2
~
0.10 2.20 2.5 0.15 2.50 2.9
~
0.20 2.80 3.3 3.06 3.56 Y 0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1
~
0.40 5.00 5.8 0.45 5.10 6.7 0.50 5.20 7.6
~
~
Allowed Allowed 3.06 3.56 ale a/l value=
Y=
0.170 0.226 1.000 Flaw is Subsurface Allowed aft =
a/t=
3.56%
2.66%
Comments:
EXM-DS4 V.1 10/3J93 IVB04017.X1S1211/i3 00335 GqC'F \\Lk ý
GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld CD:
0-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-04 Patch ID: BF-098 Ind. Data Sheet No.: 04-018 Indication: 04-018 Channel: 9 Angle:
45 Direction: 180 20%
50%
@ Max 50%
20%
Amp.
MP Max Y MP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.34 L=
0.50 S=
2.29 Analyst::*__*__*
ReviewedB Level:.
Date:
Level:
I Date: \\-2-I 13 113 EXAM-OS3 V.2 10/22103 12111/9204-018.XLS 00336 (4oOF-m(4
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-098 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
T nominal =
Clad T nominal =
E-04-04 04-018 04-018 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "1" =
Separation with clad "S" =
Surface Separation "S' =
0.34 0.50 N/A 2.29 Flaw is acceptable by Table IWB-351 0-1 ASME Section XI, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2 0.10 2.20 2.5 0.15 2.50 2.9 0.20 2.80 3.3
~
0.25 3.30 3.8 0.30 3.80 4.4 4.27 4.95 Y 0.35 4.40 5.1 0.40 5.00 5.8
~
0.45 5.10 6.7 0.50 5.20 7.6 Allowed Allowed 4.27 4.95 a=
a/l value =
Y=
0.170 0.339 1.000 Flaw is Subsurface Allowed a/t =
aft =
4.95%
2.66%
(Cnmmanfc.
rw~w15 n.sflfl1~
Iy*OW418 SU1Zt111"3 EXAM.OS4 V.1 lWOI3M 00337 OF\\k
- 1 Li D I\\ -C
- GE Nuclear Energy GERIS 2000 Indication Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-019 Chann 20%
50A Amp.
X Min Y MP Min Exam Data Sheet No.: E-04-04 Patch ID: BF-098 Ind. Data Sheet No.: 04-019 isl: 9 Angle:
45 Direction: 180
@ Max 50%
20%
Y MP Y
MP Max Y MP Mar Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.21 L=
0.75 S=
2.57 with clad Analyst: Cjj
"" AZ,
Reviewed By:
Q.
Level: -i Date:
Level: 2 Date: 1.3 fr'.
EXAM-OS3 V.2 1022/93
(~2O~
LA\\k 12/11/9304-019.XLS 00338
II GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-098 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-04 04-019 04-019 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "1" =
Separation with clad "S" =
Surface Separation "S" =
0.21 0.75 2.57 2.38 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2
~
0.10 2.20 2.5 2.45 2.83 Y 0.15 2.50 2.9 0.20 2.80 3.3 0.25 3.30 3.8 0.30 3.80 4.4 0.35 4.40 5.1 0.40 5.00 5.8 0.45 5.10 6.7 0.50 5.20 7.6 Allowed Allowed 2.45 2.83 alue a/I value=
y=
0.106 0.141 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.83%
1.66%
Comments:
EXAiOS4 VA I&=
IW 040t.IQ-S1V,'i1/
`-" 0 0 3 3 9 00339
('s:
OF v4 t
0
~
0 GE Nuclear Energy GERIS 2000 Indication Data Sheet a
Project. TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-020 Chanr 209A 5VA Amp.
X Min Y MP Min Exam Data Sheet No.: E-04-07 Patch ID: BF-101 Ind. Data Sheet No.: 04-020 el: 7 Angle:
45 Direction: 0
@ Max SODA 200A Y
NP Y
MP Max Y NP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.23 L=
0.75 S
2.79 Analyst: ("4/2 ZV Reviewed By:
Level:.. 2 j
Date:
i,' /9-1 Level:.
Date:.j--j.3Jj3 CýXAU2S3 V.2 10122193 12I1129304-020.XLS
- 00340 Gq 0ý' kq t
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-101 Exam Data Sheet No.: E-04-07 Ind. Data Sheet No.: 04-020 Indication: 04-020 Flaw Thruwall Dimension =
Flaw Length "1" =
Separation with clad NS" =
Surface Separation OS" =
0.23 0.75 N/A 2.79 T nominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2 0.10 2.20 2.5
~
0.15 2.50 2.9 2.50 2.91 Y 0.20 2.80 3.3
~
0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1 0.40 5.00 5.8
~
0.45 5.10 6.7 0.50 5.20 7.6 Allowed Allowed 2.50 2.91 alu-all value=
Y=
0.113 0.151 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.91%
1.77%
Comments:
DLAM-0S4 V.1 1WM IWB4020YXLS1211/Q93 00341
('5 01ý \\LAý
.I%
GERIS 2000 Indication GE Nuclear Energy Data Sheet Project. TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-13 Patch ID: BF-107 Ind. Data Sheet No.: 04-021 Indication: 04-021 Channel: 8 Angle:
45 Direction: 90 20%
50%
@ Max 50%
20%
Amp.
MP MaxX MP MaxX MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.38 L=
0.50 S=
2.57 with clad Analyst: Q Q,
/%
Reviewed B Level:
Date:
Level:
Date: 17- (124 EXAM-DS3 V.2 10/22/11 12J1119304-021.XLS
ý4 00342 0042(.A~
0ý -\\4k
I i~~I 2a k 1<
0 GERIS 2000 Indication Evaluation Sheet GE Nuclear Energy I
Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-107 Exam Data Sheet No.: E-04-13 Ind. Data Sheet No.: 04-021 Indication: 04-021 Flaw Thruwall Dimension =
Flaw Length "1" =
Separation with clad "S" =
Surface Separation "S" =
0.38 0.50 2.57 2.38 T nominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-351 0-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
~
0.05 2.00 2.2 0.10 2.20 2.5 0.15 2.50 2.9 0.20 2.80 3.3 0.25 3.30 3.8
~
0.30 3.80 4.4 0.35 4.40 5.1 4.78 5.55 Y 0.40 5.00 5.8 0.45 5.10 6.7
~
0.50 5.20 7.6
~
Allowed Allowed 4.78 5.55 a =
a/I value=
y=
0.191 0.382 1.000 Flaw is Subsurface Allowed a/t =
a/t =
5.55%
2.99%
Comments:
WA.-OS4 V.1 1Wr43 00O343 NWB04021J'CS12I11/93
(.Q1 VA kL4
I ii I ~I I.
1 GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-13 Patch ID: BF-107 Ind. Data Sheet No.: 04-022 Indicatlon: 04-022 Channel: 9 Angle:
45 Direction: 180 200%
500
- Max 50%
20%
Amp.
MP Max Y MP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.40 L=
0.50 S=
2.31 with clad Analyst:
cc 4
C Reviewed Level:
Date:
/Z/_,,/_
Level:
I Date: 17-1)t M3 EXAM-DS$ V.2 10/22193
` 00344 12111193ý0=-2.XLS
I 12 1 k -=,- -Z:,
GGERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-107 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-13 04-022 04-022 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length 1 =
Separation with clad "S" =
Surface Separation S" =
0.40 0.50 2.31 2.12 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-3510-1 ASME Section XI, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/i Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2 0.10 2.20 2.5
~
0.15 2.50 2.9
~
~
0.20 2.80 3.3
~
0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1 4.95 5.74 Y 0.40 5.00 5.8
~
0.45 5.10 6.7
~
0.50 5.20 7.6
~
Allowed Allowed 4.95 5.74 alue-all value=
Y=
0.198 0.396 1.000 Flaw is Subsurface Allowed a/t =
a/t =
5.74%
3.10%
uomments:
~IWA.OS4 Vi IiV3..g~
iW~O4O22JVSI2III~IS OWMDS V.1 1WM*i WV8t04022*-S12/1 1/93
.1- 00345 9 ov
[*1 U
I
-' t.
0GE Nuclear Energy GERIS 2000 Indication Data Sheet I
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-023 Chann 20%
501A Amp.
X Min Y MP Min Exam Data Sheet No.: E-04-13 Patch ID: BF-107 Ind. Data Sheet No.: 04-023 91: 9 Angle:
45 Direction: 180
@ Max 50%
20%
Y UP Y
MP Max Y MP MaR Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.35 L=
0.75 S=
3.07 with clad Analyst: c a* /9
-4 Reviewed By:
Level:
Date:
Level: "_
Date:
2-Vb EXAAýDZ$ V.2 10/22193 12/I 1l193"023.XLS
- , 00346"-o ow
1 GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Flaw Tn Separa Surfa Project: TVA, Browns Ferry Unit 3 Exam DaN Weld ID: C-1-2 Ind. Dai Patch: BF-107 hruwall Dimension =
0.35 Flaw Length w"1 =
0.75 Clad ation with clad "S =
3.07 ice Separation "S" =
2.88 Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" ta Sheet No.: E-04-13 ta Sheet No.: 04-023 Indication: 04-023 T nominal =
T nominal =
6.38 0.19 a/l Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
0.05 2.00 2.2 0.10 2.20 2.5 0.15 2.50 2.9 0.20 2.80 3.3 3.15 3.65 Y 0.25 3.30 3.8 0.30 3.80 4.4 0.35 4.40 5.1
~
0.40 5.00 5.8 0.45 5.10 6.7
~
0.50 5.20 7.6 Allowed Allowed 3.15 3.65 a =
all value=
y=
0.177 0.235 1.000 Flaw is Subsurface Allowed a/t =
aft=
3.65%
2.77%
Comments:
EXAYM-S4 V.i 10/393 1WBO4023
/312010/93 00347
---k 0;-\\L4\\
GE Nuclear Energy GERIS 2000 Indication Data Sheet Project TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal ID: C-003 Indication: 04-024 Chann 203A 500A Amp.
X Min Y MP Min Exam Data Sheet No.: E-04-15 Patch ID: BF-109 Ind. Data Sheet No.: 04-024 Tel: 9 Angle:
45 Direction: 180
@ Max 50%
203A Y
MP Y
MP Max Y MP Max Y MP Remarks Comments: No apparent tip signals.
Indtcation has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
Comments:
No apparent tip signals.
Analyst: *Q IZ.K Reviewed By:
j L
Level:
J41 Date: /?-///9.
Level: -Z Date: '-L 113 33 EXAM'O63 V.2 11OI2/93 12/1 Il304-O24.XLS 00348
-tD c* \\L 4
GGERIS 2000 Indication GE Nuclear Energy Data Sheet Project TVA, Browns Ferry, Unit 3 Weld iD: C-1-2 Cal. ID: C-003 Indication: 04-025 Exam Data Sheet No.: E-04-1 5 Patch ID: BF-109 Ind. Data Sheet No.: 04-025 Channel: 9 Angle:
45 Direction: 180 20%
Min Y Amp.
x 50%
MP Min Y
@ Max MP Y
50Ma MP Max Y 20%
370.90 264.25 6.07 17.3%
371.15 264.00 5.90 20.9%
371.40 264.00 5.88 10.5%
371.65
~
264.00 5.88 Levl:
XZ
-ae ee:-'-
ae 7
q Levl:
Dae Level Date
~~ia
~XMOS 10225
~
~
~
~
30~
~
~
. L
~
00 4
~
\\L4\\
1.1 rn
-~
0 GE Nuclear Energy GERIS 2000 Indication Data Sheet Project, TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-026 Chann 20%
50A Amp.
X Min Y TOF
- Min, Exam Data Sheet No.: E-04-16 Patch ID: BF-110 Ind. Data Sheet No.: 04-026
'el: 5 Angle:
70 Direction: 180
@ Max 50%
20%
Y TOF Y
TOF Max Y TOF Max Y TOF Remarks Comments: No apparent tip signals.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
Comments:
No apparent tip signals.
ir Analyst:
eviewe Level: -
Date:
Level:
Date: 12112 b
3 EXAM.OS3 V.2 10122J93 1211 119304-026.XLS 11 00350
-q OF 041
- 5.
S+/-L GE N GERIS 2000 Indication GE NuclearIEnergy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 CaL ID: C-003 Exam Data Sheet No.: E-04-16 Patch ID: BF-110 Ind. Data Sheet No.: 04-027 Indication: 04-027 Channel: 9 Angle:
45 Direction: 180 20%
50%
@ Max 50%
20%
Amp.
MP Max Y MP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.24 L=
1.00 S=
2.41 Analyst: k
" i Reviewed By:
- _L
- i2
'\\
Level: -
Date:
Level:
Date:
EXAAMbS3 V.2 1OIZ22j0 0:
O3 5 2193407X 12/111g,,04-027, XLS
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-110 Exam Data Sheet No.: E-04-16 Ind. Data Sheet No.: 04-027 Indication: 04-027 Flaw Thruwall Dimension =
Flaw Length "I" =
Separation with clad "S" =
Surface Separation "S" =
0.24 1.00 N/A 2.41 T nominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-3510-1 ASME Section XI, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2 0.10 2.20 2.5 2.32 2.66 Y 0.15 2.50 2.9
~
~
0.20 2.80 3.3
~
0.25 3.30 3.8
~
~
0.30 3.80 4.4 0.35 4.40 5.1 0.40 5.00 5.8 0.45 5.10 6.7 0.50 5.20 7.6 Allowed Allowed 2.32 2.66 a -
a/I value=
Y=
0.120 0.120 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.66%
1.88%
Comments:
EXAMA-D V.i iodm
!.V0407YS12/1¶¶i3
- 1. 00352 00-5 1(-ROF V 4 \\
f 0GE Nuclear Energy GERIS 2000 Indication Data Sheet L
ProJecL TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-16 Patch ID: BF-110 Ind. Data Sheet No.: 04-028 Indication: 04-028 Channel: 9 Angle:
45 Direction: 180 20%
Amp.
X Min Y 50%
MP MIn Y
@ Max MP V
50%
MP Max Y 20%
411.90 262.65 4.08 14.4%
412.15 262.25 4.39 17.3%
412.40 262.50 4.22 SPOT 17.3%
412.65 262.50 4.25 Comments: Thruwall size was determined by the SPOT technique.
TW=
0.23 L=
0.75 S=
2.86 with clad Analyst J,'-
4.-
Reviewed By:
Level:
j.....
Date:
Level:
Date: \\2 11 jj'3 EXAJM-S$ V.2 10122J=3 12/I1Z/i930O28.XLS 00353
(
o q
V-A
I..,
rni~
EGERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-110 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-16 04-028 04-028 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "i =
Separation with clad wS" =
Surface Separation "S" =
0.23 0.75 2.86 2.67 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-351 0-1 ASME Section X1, 1986 Edition TABLE IWB-351 0-1 for 4" to 12" a=
a/I value =
y=
0.115 0.153 1.000 Flaw is Subsurface Allowed alt =
a/t =
2.93%
1.80%
SComments:
rIComments:
M.m4O2~)tS¶2/l2JI3 I r^W "4J28 S 2/12M 3
EX4M4.S4 V.1 i'g 0 0 31 5 4 00--4 bi Oi
\\o
i*~~ ~
.1.
U 0
GE Nuclear Energy GERIS 2000 Indication Data Sheet
£ Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Indication: 04-029 Chann 20A 500A Amp.
X Min Y MP Min Exam Data Sheet No.: E-04-16 Patch ID: BF-110 Ind. Data Sheet No.: 04-029 e/: 13 Angle:
60 Direction: 180
@Max 5096 20%
Y MP Y
MP Max Y MP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.34 L=
1.00 S=
0.96 with clad Analyst: C
- V" z /z9 Reviewed By:
Level:.
Date:
17-111191 Level:
I Date:
- II%
I*
EXAAA-D53 V.2 10/2293 12/1119304-029.XLS 00355 --1 <
\\L(4
C~
11~55 E NGERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld lD: C-1-2 Patch: BF-110 Exam Data Sheet No.: E-04-16 Ind. Data Sheet No.: 04-029 Indication: 04-029 Flaw Thruwall Dimension =
Flaw Length "" =
Separation with clad "S" =
Surface Separation mSO =
0.34 1.00 0.96 0.77 T nominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/l Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2
~
~
0.10 2.20 2.5 0.15 2.50 2.9 2.62 3.06 Y 0.20 2.80 3.3 0.25 3.30 3.8 0.30 3.80 4.4 0.35 4.40 5.1 0.40 5.00 5.8 0.45 5.10 6.7 0.50 5.20 7.6 Allowed Allowed 2.62 3.06 a -
a/I value=
y=
0.170 0.170 1.000 Flaw is Subsurface Allowed a/t =
aft=
3.06%
2.66%
dommerns:
L~4J~4 V ~ lW~/g3 W~O4O2U
~S¶2I¶1iV3 EX&M-DS4 VA! 11*,
IWO04029 A.$12111/93 (J~f3$~c6 o~0ý
'k'A \\
I ~
I GE GERIS 2000 Indication GE Nuclear Energy Data Sheet Project TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Exam Data Sheet No.: E-04-17 Patch ID: BF-1I1 Ind. Data Sheet No.: 04-030 Indication: 04-030 Channel: 5 Angle:
70 Direction: 180 20%
50%
- Amp, X
Min Y TOF Min Y TOF
@ Max Y
50%
TOF Max Y 20%
Max Y TOF TOF Remarks Comments: No apparent tip signals.
Indication has no determinable thruwall dimension and is acceptable to IWB-351 0-1.
Analyst:
A Reviewed BY.:j1..
Level:
Date: /Z/____19 Level: -T Date: k2.-2-2t 1n EXAMWDS3 V.2 10122193 of L4Ak 12/11194-O3O.XLS t 00357
1r ; :ýt 1ý': *:ýý i
, 1.
i i
19 1 1 11ý 0
GE Nuclear Energy GERIS 2000 Indication Data Sheet Project: TVA, Browns Ferry, Unht 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-17 Patch ID: BF-111 Ind. Data Sheet No.: 04-031 Indication: 04-031 Channel: 7 Angle:
45 Direction: 0 20%
Amp.
X Min Y 50%
Min Y
@Max MP Y
50%
Max Y 20%
MP Max Y MP MP MIP Remarks 7.7%
445.96 254.05 6561 18.4%
446.21 254.05 6.64 20.9%
446.46 254.80 6.14 SPOT 22.3%
446.71 254.80 6.14 10.5%
446.96
~
~
254.30 6.42 Comments: Thruwall size was determined by the SPOT technique.
TW=
0.28 L=
1.00 S=
2.11 Analyst: C AU
/4 Reviewed By:
Level:
Date: -_191111.7 Level:
Date: NL I 13 EXAM-DSI V.2 1W22J/3 IV/11/9324031.XLS QO.3035.
(6b-0ý VIAk
tý.. 1
, ; 7 '
z : :
- "; :"i !"i 1-i C. 1.:& i:.'
- 1"
- 1 i 11 1 I...
- .,
- .. 7t :..ý
- ý-
I GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-111 Exam Data Sheet No.: E-04-17 Ind. Data Sheet No.: 04-031 Indication: 04-031 Flaw Thruwall Dimension =
Flaw Length "i" =
Separation with clad "S" =
Surface Separation "S" =
0.28 1.00 N/A 2.11 T nominal =
Clad T nominal =
6.38 0.19 Flaw is acceptable by Table IWB-351 0-1 ASME Section Xl, 1986 Edition TABLE IWB-351 0-1 for 4" to 12" a/i Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
0.05 2.00 2.2
~
0.10 2.20 2.5 2.45 2.83 Y 0.15 2.50 2.9 0;20 2.80 3.3
~
~
0.25 3.30 3.8
~
0.30 3.80 4.4 0.35 4.40 5.1
~
0.40 5.00 5.8 0.45 5.10 6.7
-~
0.50 5.20 7.6 Allowed Allowed 2.45 2.83 a -
all value=
Y=
0.141 0.141 1.000 Flaw is Subsurface Allowed a/t =
2.83%
at =
2.21%
Comments:
EOAJ4DS4 VA 1WMdI WtMMI Vi LS12lit9 O-F
\\14 \\
G GERIS 2000 Indication 0 GE Nuclear Energy iData Sheet Project TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-17 Patch ID: BF-113 Ind. Data Sheet No.: 04-032 Indication: 04-032 Channel. 7 Angle:
45 Direction: 0 20%
50%
0 Max 50%
20%
Amp.
MP Max Y MP Max Y MP Remaris Comments: No apparent tip signals.
14.68 dB below notch sensitivity.
Comments: No apparent tip signals.
14.68 dB below notch sensitivity.
Indication has no determinable length or thruwall dimension and is acceptable to IWB-3510-1.
Analyst'r jqr- /_
Reviewed By:
Level: -227 Date: /_-__,-
Level: 3 Date: \\7-2-, 1J23 EXAýM-3 v,2 10122193 UJ111930ýM.XLS ri-'- ) )3 ra(V W4 cA Vý
a GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-1 9 Patch ID: BF-113 Ind. Data Sheet No.: 04-033 Indication: 04-033 Channel: 9 Angle:
45 Direction: 180 20%
50%
a Max 50%
Amp.
MP Max Y 20%
Max Y MP MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.34 L=
1.00 S=
2.97 Analyst: (.
/*Z Reviewed B
).J-'
Level:
!Z!
Date:
/z-,<,,4, Level: 711 Date:
M2 13 1'1 EXAM-DS V.2 1mum/S 12J11/9SOCW3.XL5
!.J GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-113 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
T nominal =
Clad T nominal =
E-04-1 9 04-033 04-033 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "I" =
Separation with clad "S" =
Surface Separation "S" =
0.34 1.00 N/A 2.97 Flaw is acceptable by Table IWB-351 0-1 ASME Section X1, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/Il Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
~
0.05 2.00 2.2
~
0.10 2.20 2.5
~
0.15 2.50 2.9 2.62 3.06 Y 0.20 2.80 3.3
~
0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1 0.40 5.00 5.8
~
0.45 5.10 6.7
~
0.50 5.20 7.6
~
Allowed Allowed 2.62 3.06 ale a/I value=
y=
0.170 0.170 1.000 Flaw is Subsurface Allowed a/t =
aft =
3.06%
2.66%
Comm~nntt Comments.
IV~UWO332Q.StZtIVV3 IM904033*. S 12/11103 EXAM-)S4 V.i iwoI 0 WAZ ".
0 ý'S-5 GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 Cal. ID: C-003 Exam Data Sheet No.: E-04-20 Patch ID: BF-1 14 Ind. Data Sheet No.: 04-034 Indication: 04-034 Channel: 9 Angle:
45 Direction: 180 20%
Min Y 50%
MP MIn Y Amp.
X
@Max MP Y
50%
Max Y 20%
532.15 263.75 5.45 25.2%
532.40 263.75 5.40 25.2%
532.65 263.75 5.45 SPOT 237%
532.90 264.00 5.61 8.7%
533.15 264.00 5.64 Comments: Thruwall size was determined by the SPOT technique.
TW=
0.52 L=
0.75 5=
2.48 Analyst:
Z? 1ýE ReviewedBy Level:
Date:
Level Date:
- EXAM-DS3 V.2 1022/23 i- 00363 12I13t930-034.XLS
Q I I --) 'ý-)
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Flaw TI Separa Surfa Project: TVA, Browns Ferry Unit 3 Exam Da, Weld ID: C-1-2 Ind. Da, Patch: BF-114 iruwall Dimension =
0.52 Flaw Length 1" =
0.75 Clac r ton with clad "S" =
N/A ce Separation "S" =
2.48 Flaw is acceptable by Table IWB-351 0-1 ASME Section X1, 1986 Edition TABLE IWB-3510-1 for 4" to 12" ta Sheet No.:
ta Sheet No.:
Indication:
T nominal =
T nominal =
E-04-1 9 04-034 04-034 6.38 0.19 a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
0.05 2.00 2.2
~
0.10 2.20 2.5 0.15 2.50 2.9 0.20 2.80 3.3 0.25 3.30 3.8
~
0.30 3.80 4.4 4.36 5.05 Y 0.35 4.40 5.1
~
0.40 5.00 5.8
~
0.45 5.10 6.7 0.50 5.20 7.6
~
Allowed Allowed 4.36 5.05 al all value=
Y=
0.260 0.347 1.000 Flaw is Subsurface Allowed a/t =
a/t =
5.05%
4.08%
ýComments:
E**AM-D54 V.1 10/3/8 r/*swa434 J*.SfZ'f f
.0,0364 oo r6 ov H
I 0
GE Nuclear Energy GERIS 2000 Indication Data Sheet a
Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Indication: 04-035 Exam Data Sheet No.: E-04-20 Patch ID: BF-114 Ind. Data Sheet No.: 04-035 Channel: 9 Angle:
45 Direction: 180 20%
Amp.
x Min Y 50%
50%
MP Max Y 20%
534.90 262.25 3.52 26.9%
535.15 261.25 2.83 23.7%
535.40 261.00 2.67 SPOT 9.3%
535.65 261.00 2.68 Comments: Thruwll size was determined by the SPOT technique.
TW 0.30 L=
0.75 S=
1.73 with clad Analyst: __
/
_ _ _Reviewed B
Level:.
Date:
/z. -
//,
Level:.
Date:.E2-I1 I3 EXAMWDS3 V.2 10/2Z/93 121119304-035.9L8
ý%. &00365
,60, aF 4\\k
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-114 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-1 9 04-035 04-035 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "" =
Separation with clad "S" =
Surface Separation "S" =
0.30 0.75 1.73 1.54 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-351 0-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
0.05 2.00 2.2
~
0.10 2.20 2.5
~
0.15 2.50 2.9 0.20 2.80 3.3 2.80 3.30 Y 0.25 3.30 3.8
~
0.30 3.80 4.4
~
~
0.35 4.40 5.1
~
0.40 5.00 5.8
~
0.45 5.10 6.7
~
0.50 5.20 7.6
~
Allowed Allowed 2.80 3.30 a-e a/I value=
y=
0.150 0.200 1.000 Flaw is Subsurface Allowed a/t =
a/t =
3.30%
2.35%
Comments:
EX
-M4 VAI 1V=3 W4O35J.S12I 1I93
&4,Oý6 6 CýC o; N (
GE GERIS 2000 Indication GE Nuclear Energy Data Sheet Project TVA, Browns Ferry, Unit 3 Exam Data Sheet No.: E-04-2D Weld ID: C-1-2 Patch ID: BF-114 Cal. ID: C-003 Ind. Data Sheet No.: 04-036 Indication: 04-036 Channel: 9 Angle:
45 Direction: 180 20%
50%
@0Max 50%
20%
Amp.
MP Max Y MP Max Y MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW =
0.26 L=
0.50 S=
2.72 Analyst:
- A
,X Reviewed By:
Level: _
L Date:
Level: :
Date:
113 EXA3OS3 V.2 1022M39 12i1119304OG60.XLS 0 03 6 7
~O37 C \\
Loýk4
ý
G a
GERIS 2000 Indication GE Nclea Enegy IEvaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-114 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
T nominal =
Clad T nominal =
E-04-19 04-036 04-036 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "1" =
Separation with clad "S" =
Surface Separation "S" =
0.26 0.50 N/A 2.72 Flaw is acceptable by Table IWB-351 0-1 ASME Section XI, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/I Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
0.05 2.00 2.2 0.10 2.20 2.5 0.15 2.50 2.9
~
0.20 2.80 3.3
~
0.25 3.30 3.8 3.40 3.92 Y 0.30 3.80 4.4
~
~
0.35 4.40 5.1
~
0.40 5.00 5.8
~
0.45 5.10 6.7
~
0.50 5.20 7.6
~
Allowed Allowed 3.40 3.92 a -
a/1 value=
Y=
0.130 0.260 1.000 Flaw is Subsurface Allowed a/t =
a/t =
3.92%
2.04%
rPnmmannC.
~NHo4O3O XtS~2I¶1~3 (W90403M6L12M/1/3 EXAM-DS4 V.1 10,3/g O`
,0368c(2 ojý q
GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1 -2 CaL ID: C-003 Indication: 04-037 Chani 20%
501 Amp.
Y Min X MP Min Exam Data Sheet No.: E-04-21 Patch ID: BF-115 Ind. Data Sheet No.: 04-037 el: 10 Angle:
45 Direction: 270
@Max 50%
20%
X MP X
MP MaxX MP MaxX MP Remarks Comments: Thruwall size was determined by the SPOT technique.
TW=
0.31 L=
0.25 S=
1.92 with clad Analyst: C-32k RevieededBy:
Level:.
Date:
Level: :.Vý C Date: %
9~
EXAW06I3 V.2 10122193
~XAM.OS3 v.~
~
1211 lI2324-037.XLS 00369 1Zt1114304 OVA.LS
GERIS 2000 Indication GE Nuclear Energy Evaluation Sheet Flaw Th Separa Surfa Project: TVA, Browns Ferry Unit 3 Exam Da Weld ID: C-1-2 Ind. Da.
Patch: BF-115 iruwall Dimension =
0.31 Flaw Length "1" =
0.25 Clao tion with clad "S" =
1.92 ce Separation "S" =
1.73 Flaw is acceptable by Table IWB-351 0-1 ASME Section XI, 1986 Edition TABLE IWB-3510-1 for 4" to 12" ta Sheet No.:
ta Sheet No.:
Indication:
T nominal =
T nominal =
E-04-21 04-037 04-037 6.38 0.19 a/Il Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
0.05 2.00 2.2 0.10 2.20 2.5 0.15 2.50 2.9 0.20 2.80 3.3
~
0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1
~
0.40 5.00 5.8
~
0.45 5.10 6.7
~
0.50 5.20 7.6 5.20 7.60 Y Allowed Allowed 5.20 7.60 a-a/l value =
y=
0.155 0.500 1.000 Flaw is Subsurface Allowed a/t =
a/t =
7.60%
2.43%
Comments:
DEA-M-44 VI IW/I3 rVB04037.XLS12/1/1O3 O 0 37 "VaOM% 4 cW
I ENcerEeg GERIS 2000 Indication GE Ncler EnrgyData Sheet Project:
Weld ID:
Cal. ID:
TVA, Browns Ferry, Unit 3 C-1-2 C-003 Exam Data Sheet No.: E-04-21 Patch ID: BF-115 Ind. Data Sheet No.: 04-038 Indication: 04-038 Channel: 11 Angle:
60 Direction: 0 20%
Amp.
x min Y 50%
@ Max 50%
20%
MP Max Y MP Mar Y MP Remarks 60.6%
566.35 257.55 68.7%
566.60 257.80 82.9%
566.85 257.80 47.2%
567.10 257.30 44.3%
567.35 257.30 53.5%
567.60 257.80 Comments: Thruwall size was determined by the ASME 50% technique.
No apparent tip signals.
TW=
0.21 L
1.25 S
0.93 with clad Analyst: ( *
,k*
Reviewed By:
1*4 Level:
Date: /____I.P.3 Level: 7 Date: \\Z-113 1q3 V.2
.O.M3 0
003'7 1I2/I 9204-O3S.XUI Ovf oý. l( 14
GGERIS 2000 Indication SGE Nuclear Energy Evaluation Sheet Project: TVA, Browns Ferry Unit 3 Weld ID: C-1-2 Patch: BF-115 Exam Data Sheet No.:
Ind. Data Sheet No.:
Indication:
E-04-21 04-038 04-038 6.38 0.19 Flaw Thruwall Dimension =
Flaw Length "1"=
Separation with clad "S" =
Surface Separation "S" =
0.21 1.25 0.93 0.74 T nominal =
Clad T nominal =
Flaw is acceptable by Table IWB-3510-1 ASME Section Xl, 1986 Edition TABLE IWB-3510-1 for 4" to 12" a/(
Surface %
Subsurface %
Surface %
Subsurface %
0.00 1.90 2
~
~
0.05 2.00 2.2 2.14 2.40 Y 0.10 2.20 2.5
~
0.15 2.50 2.9
~
0.20 2.80 3.3
~
~
0.25 3.30 3.8
~
0.30 3.80 4.4
~
0.35 4.40 5.1
~
0.40 5.00 5.8
~
0.45 5.10 6.7
~
0.50 5.20 7.6
~
Allowed Allowed 2.14 2.40 al a/I value=
Y=
0.105 0.084 1.000 Flaw is Subsurface Allowed a/t =
a/t =
2.40%
1.65%
4C.omments:
EKAM.04 V.1 imm t- 00372 00372 ý 0Ao. V4 \\
I...
GERIS 2000 Indication GE Ncler EnrgyData Sheet Project: TVA, Browns Ferry, Unit 3 Weld ID: C-1-2 CaL ID: C-003 Indication: 04-039 Exam Data Sheet No.: E-04-21 Patch ID: BF-115 Ind. Date Sheet No.: 04-039 Channel: 3 Angle:
70 Direction: 0 20%
50%
0 Max 50%
20%
Amp.
X Min Y TOF Min Y TOF Y
TOF Max Y TOF Max Y TOF Remarks a
Comments: No apparent tip signals.
Indication has no determinable thruwall dimension ans is acceptable to IWB-3510-1.
Analyst: OC.
,z,*,z Reviewed By:
Q.
Level:
Date:
___(
Level:
t Date:
EXAM-063 V.2 MUMIB On F' 4 \\
12/111/9304-039.XLS 0
00373
iJ !J i.j GERIS 2000 Indication GE Nuclear Energy Data Sheet Project: TVA, Browns Ferry, Unit 3 Weld 1D: C-1-2 Cal, ID: C-003 Exam Data Sheet No.: E-04-21 Patch ID: BF-115 Ind. Data Sheet No.: 04-040 Indication: 04-040 Channel: 5 Angle:
70 Direction: 180 200%
50%
Amp.
X MIn Y TOF Min Y TOF
@Max Y
TO %a 20/
T TOP MAX Y TOF max Y TOF Remarks Comments: No apparent tip signals.
Indication has no determinable thruwall dimension ans is acceptable to IWB-351 0-1.
Analystc.a-e.&
Rev1wed By:
Level:
z Date:
/
F-7 Level:
Date: \\2II?,Iq EXAM-DS0 V.2 10/22/193
- ' fifix 4 qc\\b Oi V-A 12fjl~S3O4O4O.XLS
T [
125]
B [000]
40*-
20%-
hILL O to,:ch LI.
+,
POD SurFace In 4-001 f.J3
.67
ý.17
- 3. fi
- s. 1 6.68 6.18
'9.68 '1.19 '12.69 I w metol path inches 1i0st/Time Start =
9.17, End = 9.17, Diff =
0.00 Amqplitude Start = 40.60, End = 48.60, 0iff =
0.00, men = 48.60 596.54 605.S3 Line = 0027, Trigger = 0125 0
-C.
CAi 614.51 A
C R623 mS 0
C c/I
W[20 T[0081j 00 lotch
÷A O1D1 S face Ind.
4OZ~II
__/--002 I
I h ~
d ~
A ~
j
-. +
V.67 1.17 6.67 6.1 16.60 1 0 6.68 1,.19 1,2.6, N
,,metal path inches Dist/Tine Start =
9.02, End =
9.02, Diff =
0.00 Knp4itude Start = 55.13, End = 55.13, Diff = 0.00, 1san = 55.13 I
0 CL
-F cdJ CA
(.2~
-0 0 10
T[0091 160%-*
Slot 1) A-scan ; HU-120 : A 68 : D 180 FFREE2f:
I AUTO SCALE ICHAN 05 VIDEO LINEAR ITIME SCALE -ITRACE OFF SCRH GAIN 100' DAC VERT OFF
-A-GATE F a -
-(;Atc
-TC- -GATE
-f-i- -c-ArE I-BE-GArE I
A II m
686.25 C) 0 (I
0.,
cvJ
W, L (066j T [02 11 13[000]
I60'u-II L)tidual
- Indic Atlon 4 004 I-40i%-
201*-
+
1.63 17.69
.4 1.5 metal path inches Dist/Time Start =2.74, End =
2.74, Diff =0.00 Jplitude Start = 55.67, End = 55.67, Diff = 0.00, Mem 5 5.67 0.66, 2.93*
4.06*
5.19*
6.33*
9.73-665.39 61.347 Line = 0065i, Trigger 0021Z DAC 1.34-4.97.
8.590 I0.II-
.235.91 240.94 24S.93 Line = 0066, Trigger = 0021 x =
670.79in, V =
259.30Dn Z = 1.4D:n Log w
C)
CO~
(A, 265.91
- I I1k I 003.J "U
. 7 1 CO=1.v4 LDU*.v
p
ý L[0521 T [0291 ASS 267.50-'
264.00 260.50 253.00 724.90 7304077 59 4
0 769 X =
732.15in, Y 256.00in DAC-I.OGI L[05ZJ T[029]
8 [0001 160*--
Mal! I II
/"id zrd i, 4-00 i
- 0117I k ____
j I
jh*u4L Mu I.- - A l
i I
I 1
F l
l
-9.44 ~-3.16 2.80
ý.96 115.12
'21.28 '27.36 '33.52 p39.68
'45.84
,I usec Dist/Tine Start 2 26.40, End = 26.40, 01ff =
0.00 ij&a..
~
-&a 1ý qa sc n ntfn co..
j-2 0.29-**:
0.99 -
]' i',,
Line = 0052, Trigger = 0029 X =
732.15in,
=
258.94in a = I.13in 0.29 0.99 1.69 724.99 730o.52 735.99 Line = 0052, Trigger = 0029
,.34 258.85 261.34 263.65 266.33 ft I
I
K' L[1Th5J T10161
/
I X =
725.l0in, Y DAC-1.OG 261.45in I
',ualt Ind. 4 0J 20%-_ L_
U I~d ~
~
.~
a k4mýýýý U
Dist/Tine Stcrt = 29.80, fRnplitude Start = 63.28, I 5.A2
ýZI.28 ý7.36 33.52
ý39.66 "15.64 tmwc C) 00 0
End = 28.80, DIff =
0.00 End a3.28, Diff = 0.00, 1...
IU Fc 246.60 249.09 ire = 0065, Trigger = 0010
=
725.101n, v =
258.191n 2 I.251n
0: Ch 07 -, AM
-cnhB-2 5
[070 NIX 7Z7.71 723.21 736.7.1 7
Ix 744.7lin, V =
283i I AC-LOG DAC 6.77-63.241 9.71 75s.61 245.07 249.56 254.00 Line = 0070, Trigger = 0068 X =
744.711n, Y =
260.29in Z 1.84in Log 4
e 0
(A
8, 4-008 S
n 09: Tr0scar = 0017 A 4 D MOgr 00 3.9
.Z2-C 6.67-71.8 727 3.9242.20 246.72 251.20 255.71 260. 19
'264. 71 269.19 Line 0060, Trigger = 0047 Line =0060, Trigger = 0047
C) 10.39 240. 1S 245.18 250. 16
' Line 0066, Trigger = 0056 x=
744.60Cn, i =
260.271n Z = 1.071n
L[06Uj T [059]
B [000]
160*-
Do*
""Idu I Ind. 4-0 10 All 20%_-
r-0.6 11.20 5.26 ý3l'.30
- '.44
'11.50 13.56 15.63 117.69 c
mietal path inches lDist/Time start =
2.26, End =
2.26, Diff = 0.00 lAwlitude Start = 56.21. End = 56.21. Diff = 0.00. NHne = 56.21
.ft 00 cJ r1 (J1 717.67 725.68 Line = 9060, Trigger = 0059 733.68 741.69 1
I
T [0241 GAT
-C-
-AF
--UE
-B-14.21 24.21 32.21 40.21 48.21 X =
22.21.n, 0 =
254.05tn 240.60___
ALBS 4
flAC23 ejoeti dep*th iLn inches Dist/Tlpke Start = 4.98, End =
4.74, Diff =
0.24 16.31 26.82 37.32 47.83 Rplltude Start = 74.70, End = 68.18, iff
= 6.52, Hem 71.44 Line = 0053, Trigger = 0024 1.76-
. 12-r 00 5
.2 9,.
6
.7 S 245'.00 24i.58 252.00 255.50 25.O08 26i.58 2667.00 26i.58 2?3.08
- ai
~
i i~ne =0053, Trigger 002O4
S I
Ch 05 AM 1
1 T[DdJT[0411 KII' ao 160%-
4-040 Q80%
556.35 564.35 572.35 580.35 588.35 N =
566.6D0n, Y =
260.20n DAC-LOG 40
-9.44
-3.6 2.80
.96 15.12
ý1.28 27.36 33.52 9.60 45.84 246.57 249.08 251.50 254.08 256.59 259.09 261.57 264.08 266.58 269.0 Line = 0060, Trigger = 0041
- 0. 1s 0.71 1.27
)
1.83.
(55 556.25*
560.7?4 565.2Z3 569.73 574.2Z6 576.75 583.2Z4 587.74 592.2Z3
J et~
C~
-n
~i:.
248.84 251.35 0020 260.55in 2 = 1.20in 253.83 256.34 258.85 261.34 263.85 266.33 268.84 I
B[000]
160%i-1i t-038
,.xnd.
NUNN" ii 40%~-
20%s-
. AIdoL. I.
JSCRN GAIN +019 I
I J
ý.29 36 1.42 11.48 113.54 115.61
.w tatl path 117.67 inches las I DAC 1.33-3.14-4.96-i A-038 i
l i.
1.78
,w:
4.05 6.3Z 6.77-8.58-8.58 566.45 576.96 Line = 0072, Trigger = 0002 bo F. AD Y7I.I7 10.39 240.15 245.10 ine = 0072, Trigger = 0002 250.16 255.15 260.10 265.16 270.
0:~
~
~
C11 1:
- -cn
- F1 5
A"8 L10bj4.1mJ T1D2S]
ADS T[21NVmf111 26S.00 160 244.50-563.46 571.46 579.46 517.46 595.46 X =
569.71in,
=
255.00n.
DAC-LOG
-0.
0
.70
.20 3.70
ý.211 6.71 9.22 1.71 11.22 12.72 E
r]
metal path iniches I
I I*II II.
. II I
I 2-1AC DALC 0.6 0.60-1.76
-1.76-2.91 4.07
~
.4.07-S.22.0 5.22-6.38 O6.3**0 7.54 7.54-252.15 257.14 262.13 553.41 556.91 560.40 563.90 567.40 570'.89 U7.4
..e =_0048, Trigger = 8025 Line
.040, Trigger = 0025 0 =
567.4.in,
=
255.0" 2 ="2.021n IL
L 10a 11 T[059]
ABS 267.50 264.00 260.50 257. 00 250.00.
520.15 525.65 531.15 536.65 542.15 547.65 X =
534.90in, Y =
263.25in DALC-LOG T [0591 B[0001 160'~
.7777-7 SPOT 4-036 hli Ou i______
t I>pLwei 4011 2014 rI111 J44A4LW I
I 77
-0.07 0.9
',9
'U
,4.86
ý.84
'.8 l7f0 8.60 metal path inches Dist/Tite Start =
5.12, End =
5.29, Diff =
0.18 Aran]lifmuia* _* na
71IAA Flnd = fig nR rbiff
A AL M A..--R 77 I-u 1]
L1(074]
I iOf 1 36.fi
~ABS fi1
- I 267.50 160001 264.00 03
- 67.
257.00 d 250.00tt
.,d 246.50
':'* \\,2,
'*"\\'....N 7"
" N 943.2 520.15 525.65 531.15 536.65 542.15 547.65 O
rti X
535.40in, Y 2
61.50in T-0.7
.0 1.9
.80
'3.
87
'4.
86
ý.84
'6.82
ý.81,
.80 F.1
.metal path inches
_6 I= t I T~ -
I' w
-ca.
Is-I'-
.A46.M M
ABS 3.78' 1.76 5.22-6.67-6.38, 71-c-8.69 ~
~
~N
~
- 9.56
'N_
L [08 1.Q8.......
I JA T SCAL IC IM 0,VDE
- dA =
T[0501 T00 267.50~16 SPoT 4-034 264.00
/Upper tip 260.50 257-00 253.50 Nr 246.50-Lower tlip:
243.00 520.15 525.65 531.15 536.65 542.15 547.65 532.55in, Y =
263.75in 4
9 0
.7
'2.2 6.70 6.21
,71 8.22 P97 1 1.2 1.7 4
metal path inches Dist/Time Start =
5.42, End = 5.79, Diff =
0.37 AMplitude Start = 57.05, End = 69.26, Diff = 11.42, mean U6.55 2.33-
.~~~~~ ~ ~
~
~
5.22 6.67. -
,rx qGQf07 530 CA RA7-l7 JAIPf
-i n A
P 1
L 10021 T[120]
ABS 260.5u 257.00 253.10 250.00.'3/4' 246.50...
243 00 414.90 490.40 495.90 501.40 506.90 512.40 X
S14.d90im, V = 263.59in DAC-LOeG SPOT rnd.
4-033 r tip F
u a
tm I I
I I
I J
I I
I I
I I
I l
N II I1i
/1 wer tip I C 20I LELI!i1 I
_/ __I I
IrlIVM Jt Lwal I4
.4....-
0.66 11.45
.25
~305 6J.95
'4.65
.44
ý.24
- 7. 04 7.341 metal path inches Dist/Time Start =5*23, End =
5.47, D1ff 0.*24 a.-.14 4-..I c,4.-4 -Cl I4 I I-nnl an A.Ace a 'no A.-Cfn CA; A
-LU36J r[050]
265.30 258.30 254.80 251.30 247.80 244.30 240.80 L[03uj T(0501 1-~
I60OD]
I
+,
lotch bA 00 St face I d.
4-032
.21in, Y =
249.69Gm ii A
IA m i I
a4
.1, Ii
,I
.67 2.,7 3.67
'.ta 16.68 8S.,8 I
9.68 111.19
',2.69
.rto. path irnhes ime Start =
9.20, End = 9.20, D1ff =
0.00 ude Start = 58.93, End = 58.93, Diff =
0.00, mean = 58.93 DAC 1.764 4.12-,
6.47[
8.82-1 497.79 506.78
= 0036, Trigger = 0050 245.0 0
2g9.56 e-= 0036, Tri.gger =-0050
'W Surface Ind. 4-032
.;: i crt E72.06" a Ia.
to
wr
-I' L [05.-
T[0061 9[000]
160%-
aUn-____
2fl
~~~
~
pe tip___
A AI S
AiUi AI 1 I.1 A.
= ~~
~~~~
I LI L
6.01 6.45
'4. 10 4.41639
'.04 6.69 1/22 33
ý1.98 60.63 me40l path inchwx Dist/Time Start = 5.95, End = 6.15, Di)ff = 0.20 Aiplitude Start = 63.28, End = 71.98, Diff = 8.70, Mean = 67.63
-I 00 27
$lot 0.A&an F
1 1
- A68D 8(090]
IIEZ.
A OSAE I HI S
VT~oILIFA
[0t itisea..
FF u(iiiJ VR W
I I I I
0.43-1.27-246.57 249.08 251.51 Line= 0064, Trigger = 0030 X =
447.35in, Y =
255.90D 2 = 0.831n Lon I
0.43 2.11 437.72 444.10 450.69 457.
0 0t C\\
Line = 0064, Trigger = 0038 I
L Ub I
.in
.,..ý1 J!
269.70 266.20 262.70
,lb 259.20 -
255.70-.
252.20-245.2 402.04 407.54 413.04 418.54 424.04 X =
420.79in, Y =
260.4Sin DAC-LOG L [Ob ej T [075]
B[LOOD]
160*-
III SPOT 4-02 In IL2 tip O0*.
I it IL
/
/1 OMA tip iJ
- 1. 1 20 11l111111 pil p
J~A~
I*..ko* A.JA*
i h.L
- WA-I.
-I
=
h-l,ý
-0.
8 50.30 6i.e
'1. 47 i.05 i2.63
ý3.21
.s0o
'4.38 ImItal path inches Dist/Time Start =
2.06, End =
2.23, Diff =
0.17 A^plitude Start = 56.21, End = 63.28, Diff =
7.07, Hem = 59.75 m~.
C>
0
00-.
(ji(
LLU77I Tf[061]
267.50 264.00 260.50 257 00 243.00 399. 15 404.65 410.15 415.65 421.15 426.65 43 I =
414.40in, V =
262.2Sin L [O'ij j T[0601-160%--
SPOT Itul.
L-027 14PW Itip 20*-
A" 444ýýý 2.11
ý.76 3.40
'4.05 14.69
ý.35
ý.99 6.64
?.28 7.94 metal path tinches D0st/Time Start =
5.55, End =
5.72, 0iff =
0.17
&-11lq+..4.a+
f* 2 In r'*4 d
1 I
fl1F Q 7 M-
- 97 07 IASS DAC 399.04 408.02 Line z 0977, Trigger = 0061 2.33-3.70-5.22-956 242.20 ce-ttj 417.01 246.72 251.20
- 0051 250.02in 2 3.091n Z55.71 260.19 264.71
L [0651 7 [0631 ADS 259.20 255. 70-All
.24870 245.20-404.85 410.35 415.85 421.35 426i 85 432.35 41 X= 420.6Dmn, Y =
261.451n
/
11l I i.
4-0!6 40*---____
J 11 IL I A.A It.
~
nn
~"
afl in. p ~
Dist/Timo Start = 25.
3.96 115.12
- 20. End = 25
!1.28 127.35 33.52 S39.5fl
'45.84 usec O, Diff =
0.00
- 0. Diff =
0.00. Hemn = 66.00 246.57 249.00 251.50 Line = 0065, Trigger = 0063 X =
420.60Dn, Y =
258.61in 2 1.0tin 70-I
I L[Obmi T
[092]
9(090]
tea0%-
80*-
X = 371.15in, Y =
264.0Dmn DAC-I.OG
=
4.07, Diff =
0.00
62.20. Diff
0.00. Hem = 52.20 ADS DAC 7.54
~
i 348.01 35r.02 Line -*0084, TriLgger = 0092 0. 89 2.33-3.78-5.22-6.67-242.20 24.2251.20 Line = 0084, Trigger 0092 X =
371.151n, V 259.61in 2 =4.071n Log
.0.
. U.
a 1
. u 26i.710 C..
(.,1
'I COU.
IV
I L [0-jj T [0911
- [c00]
160%-
,Irud 4"t024 so,--
N I
m 40%--
20%- F /
-fWI.---4--f4~
4-U+
4 4
4 IL..iLl mi zLm"
!L!fl
~!
~
JJ 5s b.79
'1.64 2.49 13.33
'4.
18
.o2
ý.87
'6.71 17S6
~~dept*h Ln i~nche$
.Ioit/Time Start z 3.68, End =3.68, Diff =0.00
_, 14.~4*.-
0-4 c
I d
21 n~fflF ai ark M-Ka 341,.01 356.02 Line = 0079, TrigLgejr = 0091 0.89-2.33-3.78-5.22-6.67-242.20 246.72 251.20 Line = 0079, Trigger 0091 X =
370.901n V =
259.36in 2 = 3.O9in
(~j C,
0
-l 255.71 260.19 264.7
L (070J T (1091 ABS 267.50 264.00 2460.50 N
243.00 28?.90 293.40 298.90 30i.40 309.90 X =
315.15in, Y =
262.50Dn VAC-LOG L[O/oj T[109) 11
- I inches Dist/Tiiqe Start 4.26, End =
4.51, ff =
0.25 f=
in A7 3.78.
5.e 2- 0, ie 01 16
.67 -
- 7.
.. 'i]i.i;:.*:.]*:
],-
207.79 293.77 ine = 0078, Triggier = 0189 b.,
305. 78 311I.
299.00 IA F P 1:ý','ý 242.20 245.69 249.1I Line = 0070, Trigger = 0109 M" =
315.15in, Y =
259.30D 2 = 2.91in Log p-I
~1 fL.
~
263.20
~hi
~
LA 9
,.1*1#" wwý I ---
T IL L JU77i L'
[0*1 j I
ADS T[0591 267
.5 0 29
.4 98 90 3
A.0 30M9 15 4
264.00]
260.50 257.00 253.50 250.00*.
287.90 293.40 298.90 304.40 309.90 315.40 X =
302.65in, V 262.25in DAC-LOG Dist/
Aipli ABS DAC I 7 6-4.07.
6.30-7.54-293.77 299.80 3
2420.2 245.69 249.V S0059 3Line 0077, Trigger = 0059 X =
302.6Sin, Y =
259.30in 2 = 2.7lin Loq
- 25. 68 263.20
p --.
-tU7bj r [0371 ws 265.30 261.80 258.30 254.80 251.30 247.80-244.30-240,80-T10371 91009]
1601i-X =
300.041n, T =
259.601n DnAC-LOG art= 3.93, End=
4 rW*
=
.FrI q
Diff = 0.27 25i.17 257.17 262.16 Line = 0076, Trigger = 0037 b
JAC 290.30 291.B2 29!.29
.ne
0076, Trigger = 0037 4
302.940n, V =
259.602n
= 2.671n li I IIJ I*
1 I
tx-I Ve o
~
-LA o
~~(A
.Iua.
a
.3uu.,
I&.
oU 317.28 I
1ubvj 00515 262.80 257.30 251.800 246.30 240.80 169.21 177.21 185.21 1
=
190.461n, Y =
255.55tn AC-LOG iv-I T[085]
8 [0001 160 *--
II
,Ll I
I 169.29 178. 28 Line = 0059, Trigger = 0085 t/Time start = 5.20, litude Start = 72.53.
d = 5.04, Diff =
0.16 d = 62.20. Diff = 10.33.
l4ewn = 67.36 EU
.zo ADS DAC 2.35-Im 5.29-6.77-
.24-245.07 249.56 254.08 Line = 0059, Trigger = 0055 X =
190.46in, V =
259.15in 2 = 3.57in "P
O1\\
~0j.2 06 (A
(A I
258.57 263.05 267.57 272.,
I
T[00]
160-LUUUJ BS Slo 0: !*-cn:B
-93A4
- UT I-r GATE A-GAT
[-T bGT
~
C GATE 265.00 259.50 254.00 SPOT Inid.
4-019 248.50
/
oper t. p 243.00DJ-72.15 80.15 88.:;i I
262. 501n a
92.15in, Y =
o0*
V 201erwe tiA
- 1. 18 2.91 I '~
ro~
Nkmk" U[
Wk-4AIAM, 49
$II~
I I
11.30 1.94 2.59 S3.23 83.9
'4.53
¶.I1 5.82
'6.48 metal path inches 4.65 6.38 F 111-iVti r7y, 77-1 I
Dtst/Tine Start =
3.70, End = 3.92, Diff =
0.15 Amplitude Sturt = 60.02, End = 61.65, Diff =
1.63, HeMm
= 60.64
-I 8.11 72.06
- 79. 0s ine = 0070, Trigger = 0080 O0 q U'i 0.89-3.78-5.22-6.67-
.i,.!.:..:
t 9
m
.190 8.11 9.56 512 242.20 246.72 251.20 e = 0078, Irigger = 0080
- 92. ISin, Y =
259.58in Z 2.66in 255.71
L[D83j T1[074]
Se[uooJ I [ 015,,.-
SPOT Ind. 4 tip
-016 AU 40%U Lw 2.84 3.48
'4.13
'4.77
,.42
'6.07 16.72 7.36 p.0t 8.66 metal path inches Dist/Tine Start = 5.85, End =
6.09, Diff =
0.24 Aimplitude Start = 57.30, End = 71.98, D1ff = 14.68, Mean = 64.64
('.J C.
z CA (A
L[Ohzpj T [0381 (009]3 160%~--
SPOT Irmd. 4017
/UPPer' tip
/
uu-40t-t AJ. A AAiLAAAAiW~.
. i i
.. I
. I'"
I i
" i.
.I
"--I
'28 3.48
'4. 13 4.717 6.42 ~6.01
'.7 8
86 meltal path inches Dist/Time Start =
5.77, End =
6.01, Diff =
0.24 Anplitude Start = 60.02, End = 70.35, Diff = 10.33, Nmeo
= 65.19 I
(y-j ci.
0
~A I
Q(0561 7 [055]
B[C00J 160*-
,cnd. *- 0 16
/
LIi_- K_
40%--
2ov-
+
I
-It I----~*.~~~
4 F.71
-Of8 1.106
.23
.29
ý.36 LK.4 2~ 11401.5t5.1176 mtlpath inches Dist/Time Start =5.81, End =5.81, Diff 0.00
£rmltu4+-i a:++
? ~7n C
r
=
n,~
I n4ff n f nn u-vp in Ti L
(.~
L[076]
T[1001]
160*--
26S.00 259.50 254.00 Z415.so 243J.003.40 11.40 19.40 ii 20.40in, Y =
262.00Dn DAC-LOG I
2.9e4 3.42 4.00 4.57 2
depth In Inches 17 16
=
3.37, End =
3.60,
£0 to E-,1 -A c£ no ff =
0.
,£~.
I BAC 3.78 0 T
r a
L:ine -- 0076, Trilgger = 0100 AS AC 7.54 0
0"I,, J-.
7D U'
am. CIS L 5o1.o
& F. e4 I
242".24 246.26 Line = 0076, Trigger = 0100 o.,1*
- 400,
W-ll L [Ofljj T[032]
e[cOO]
ISO%- I 1I 40%--
RAI W
11Id4-1 2BY-4 I
-0.40
.70 2.20 3.70 5.21 i.71 Dist/Time Start =
7.35, Endl=
7.35, D IAmlitude Stirt = 71.98. End =71.98. D G0.22 9.71 111.22
'12.72 metal path Inches ff =
0.00 ff =
0.00. Moeo
= 71.98
~jJ
T [032]
91000]
160%--
uId,,&l,*
I 1"-
A ~~II I
~ ~
~ ~ ~
1
.,Yt-lL
~
I 40%--
20%-
I
-- I I
]
!1
+
.K IDist/Timle Start =
IAimnlitiv1 q*mw+
=
I -~
I I ~
6.70
- 5. 21 6.71 0.22 9.71 11.22 112.72.
metal poath inches I
5.77, End =
5.77, Diff =
0.00
- 5.67, End = 55.67, Diff =
0.00, mein = 55.67 9.56,1NE 24i.20 246'.72 251A2 Line = 0082, Trigger = 0032 x
11.40in, Y =
259. l8in Z =.0Dmn 269.19 boo w
Si (jj
-m
52.32 0 _
T
0 BROWNS FERRY UNIT-3 WELD LOCATIONS 00 30
- 180" 210*
3300 3600 EL. 745" VESSEL FLANGE C-5-FLG C-4-5 C-3-4 C-2-3 C-1-2 C-BH-1 EL. 706" EL. 573" EL, 524.5" EL, 404" TOP OF SHROUD
-EL, 391.5" EL. 372" f
BELTLINE REGION EL. 258.5" EL. 204" EL, 125.5" SHROUD SUPPORT SEL.
121.5" BAFFLE PLATE p
0 0
C;'
-xl
-(A GE NUCLEAR ENERGY BROWNS FERRY UNIT 3 VESSEL ROLLOUT & AS SCANNED PATCH LOCATIONS BF-3-VMA REV 0
0 0
258.5" 245.71" 271.30" CH.
ANGLE DIR.
MIN Y MAX Y Nominal Clad T = 3/16" Nominal Base Metal T = 6 3/16 1
0 W 0
252.25 264.75 2
0 W 90 252.25 264.75 3
70 UP 0
247.36 264.75 4
70 CW 90 252.25 264.75 5
70 DN 180 252.25 269.64 6
70 CCW 270 252.25 264.75 7
45 UP 0
245.71 264.75 8
45 CW 90 252.25 264.75 9
45 DN 180 252.25 271.30 10 45 CCW 270 252.25 264.75 11 60 UP 0
240.90 264.75 12 60 CW 90 252.25 264.75 13 60 DN 180 252.25 276.10 14 60 CCW 270 252.25 264.75 15 0 BM 0
252.25 276.10 16 0 BM 90 240.90 264.75 0
0 2
p GE NUCLEAR ENERGY BROWNS FERRY UNIT 3 WELD C-1-2 EXAM VOLUME SCALE: NONE DWG. BF3C-1-2 REV. 0
WELD 258.5 t
I ASME EXAM VOLUME Nominal Clad T = 3/16" Nominal Base Metal T =
6 3/8" CA GE NUCLEAR ENERGY BROWNS FERRY UNIT 3 1 SUR SPEC BRKT AUTO SCAN LIMIT SCALE: NONE DWG. C12SPBKT REV. 0