ML091250275

Replacement Page TS 2.1 - Page 8, License Amendment Request for Administrative Revisions

ML091250275
Person / Time
Site:	Fort Calhoun
Issue date:	05/05/2009
From:	Omaha Public Power District
To:	Office of Nuclear Reactor Regulation
Wilkins, L E, NRR/DORL/LPL4, 415-1377
Shared Package
ML091250264	List: ML091250275
References
TAC MD9186
Download: ML091250275 (1)

Text

TECHNICAL SPECIFICATIONS 2.0 LIMITING CONDITIONS FOR OPERATION 2.1 Reactor Coolant System (Continued) 2.1.2 Heatup and Cooldown Rate Applicability Applies to the temperature change rates and pressure of the Reactor Coolant System (RCS).

Objective To specify limiting conditions of the reactor coolant system heatup and cooldown rates.

Specification The combination of RCS pressure, RCS temperature, and RCS heatup and cooldown rates shall be maintained within the limits specified in the PTLR and as designated below:

a. Allowable combinations of pressure and temperature (Tc) for a specific heatup rate shall be below and to the right of the applicable limit lines as shown on the pressure and temperature (P-T) limit Figure(s) in the PTLR.

b. Allowable combinations of pressure and temperature (Tc) for a specific cooldown rate shall be below and to the right of the applicable limit lines as shown on the P-T limit Figure(s) in the PTLR.

c. The heatup rate of the pressurizer shall not exceed 100°F in any one hour period.

d. The cooldown rate of the pressurizer shall not exceed 200°F in any one hour period.

Required Actions (1) When any of the above limits are exceeded, the following corrective actions shall be taken:

1. Immediately initiate action to restore the temperature or pressure to within the limit.

2. Perform an analysis to determine the effects of the out of limit condition on the fracture toughness properties of the reactor coolant system.

3. Determine that the reactor coolant system remains acceptable for continued operation or be in cold shutdown within 36 hours4.166667e-4 days <br />0.01 hours <br />5.952381e-5 weeks <br />1.3698e-5 months <br />.

(2) Before the radiation exposure of the reactor vessel exceeds the exposure for which they apply, the P-T limit Figure(s) shown in the PTLR shall be updated in accordance with the following criteria and procedures:

2.1 - Page 8 Amendment No. 22,74,161, 207,221