ML062120638

Tech Spec Pages for Amendment 249, Containment Sump Level Indication

ML062120638
Person / Time
Site:	Indian Point
Issue date:	07/28/2006
From:	NRC/NRR/ADRO/DORL/LPLI-1
To:
References
TAC MD2655
Download: ML062120638 (2)

Text

instrumentation and radiation monitoring equipment calibration, and as fission detectors in amounts as required; (4)

ENO pursuant to the Act and 10 CFR Parts 30, 40 and 70, Amdt. 42 to receive, possess, and use in amounts as required any 10-17-78 byproduct, source or special nuclear material without restriction to chemical or physical form, for sample analysis or instrument calibration or associated with radioactive apparatus or components; (5)

ENO pursuant to the Act and 10 CFR Parts 30 and 70, to Amdt. 220 possess, but not separate, such byproduct and special 09-06-01 nuclear materials as may be produced by the operation of the facility.

C. This amended license shall be deemed to contain and is subject to the conditions specified in the following Commission regulations in 10 CFR Chapter I: Part 20, Section 30.34 of Part 30, Section 40.41 of Part 40, Sections 50.54 and 50.59 of Part 50, and Section 70.32 of Part 70; is subject to all applicable provisions of the Act and to the rules, regulations, and orders of the Commission now or hereafter in effect; and is subject to the additional conditions specified or incorporated below:

(1) Maximum Power Level ENO is authorized to operate the facility at steady state Amdt. 241 reactor core power levels not in excess of 3216 10-27-04 megawatts thermal.

(2) Technical Specifications The Technical Specifications contained in Appendices A and B, as revised through Amendment No. 249, are hereby incorporated in the license. ENO shall operate the facility in accordance with the Technical Specifications.

(3) The following conditions relate to the amendment approving the conversion to Improved Standard Technical Specifications:

1. This amendment authorizes the relocation of certain Technical Specification requirements and detailed information to licensee-controlled documents as described in Table R, "Relocated Technical Specifications from the CTS," and Table LA, "Removed Details and Less Restrictive Administrative Changes to the CTS" attached to the NRC staff's Safety Evaluation enclosed with this amendment. The relocation of requirements and detailed information shall be completed on or before the implementation of this amendment.

Amendment No. 249

PAM Instrumentation 3.3.3 Table 3.3.3-1 (page 1 of 1)

Post Accident Monitoring Instrumentation CONDITION FUNCTION REQUIRED CHANNELS REFERENCED FROM REQUIRED ACTION D.1

1.

Reactor Coolant System (RCS) Hot Leg 1 per loop (a)

E Temperature (Wide Range)

2.

RCS Cold Leg Temperature (Wide Range) 1 per loop (b)

E

3.

RCS Pressure (Wide Range) 2 E

4.

Reactor Vessel Level Indication System (RVLIS) 2 F

5.

Containment Sump Water Level (Recirculation 2

E Sump)

6.

Containment Water Level (Containment Sump) 2 E

7.

Containment Pressure 2

E

8.

Containment Pressure (High Range) 2 E

9.

Containment Area Radiation (High Range) 2 F

10.

NOT USED

11.

Pressurizer Level 2

E

12.

Steam Generator (SG) Water Level (Narrow 2 per steam generator E

Range)

13.

Steam Generator Water Level (Wide Range) 4 E

14.

Condensate Storage Tank level 2

F

15.

Core Exit Temperature - Quadrant 1 2 trains(c)

E

16.

Core Exit Temperature - Quadrant 2 2 trains(c)

E

17.

Core Exit Temperature - Quadrant 3 2 trains(c)

E

18.

Core Exit Temperature - Quadrant 4 2 trains(c)

E

19.

Auxiliary Feedwater Flow 4

E

20.

Steam Generator Pressure 2 per steam line E

21.

RCS Subcooling Margin Monitor 2

E

22.

RWST Level 2

E (a)

The required redundant channel for each of the four loops of RCS hot leg temperature is a qualified Core Exit Temperature train in the quadrant associated with that loop.

(b)

The required redundant channel for each of the four loops of RCS cold leg temperature is any channel of steam generator pressure for that loop.

(c)

A CET train consists of two core exit thermocouples (CETs).

I INDIAN POINT 2 3.3.3-4 Amendment No. 249