Text

EOC 21 Refueling Outage Inservice Inspection Report, Fourth Ten-Year Inservice Inspection Interval
	ML060580472
Person / Time
Site:	Oconee
Issue date:	02/23/2006
From:	Brandi Hamilton; Duke Power Co
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	Download: ML060580472 (366)
	v • d • e

{{#Wiki_filter:BRUCE H HAMILTON wMQue Vice President c SWPowere Oconee A'uclear Station Duke Power ONO0VP / 7800 Rocherster Highway Seneca, SC 29672 864 885 3487 864 885 4208 fax February 23, 2006 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555

Subject:

Duke Energy Company Oconee Nuclear Station, Unit 2 Docket No. 50-270 Unit 2 EOC 21 Refueling Outage Inservice Inspection Report Fourth Ten-Year Inservice Inspection Interval Please find attached a copy of the Inservice Inspection Report for Oconee Unit 2 End of Cycle 21 Refueling Outage. This report is submitted pursuant to Section XI of the ASME Boiler arid Pressure Vessel Code, 1998 Edition, with 2000 addenda, Article IWA 6230. If there are any questions you may contact R. P. Todd at (864) 885-3418. B. H. Hamilton, Site Vice-President Oconee Nuclear Station Attachment ACS'-7 www. dukepower. corn

U. S. Nuclear Regulatory Commission February 23, 2005 Page 2 xc wo/attachment: Mr. William D. Travers Administrator, Region II U.S. Nuclear Regulatory Commission 61 Forsyth Street, S. W., Suite 23TE.5 Atlanta, GA 30303 Leonard N Olshan, Projects Manager Office of Nuclear Reactor Regulation U. S. Nuclear Regulatory Commission Washington, D. C. 20555 Mr. M. C. Shannon NRC Senior Resident Inspector Oconee Nuclear Station - L

INSEER VICE INSPECTION REPORT DUKE POWER COMPANY OCONEE NUCLEAR STATION UNIT 2 TWENTY-FIRST REFUELING OUTAGE DDuke Uo Power.M A Duke Energy Company

1i, 1 Owner's Report For INSERVICE. INSPECTIONS OCONEE UNIT 2 2005 REFUELING OUTAGE EOC21 (OUTAGE 1) Plant Location: 7800 Rochester Highway, Seneca, South Carolina 29672 NRC Docket No. 50-270 Commercial Service! Date: September 9, 1974 Document Completion Date a 06 Owner: Duke Energy Corporation 526 south Church St. Charlotte, N. C. 28201-1006 Revision 0 Prepared By: ICo Date /- I q-(o6 Reviewed By: Date I I a6 Approved By: Date /sL

FORM NIS-1 OWNER'S DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner: Duke Energy Corporation, 526 S. Church St.. Charlotte. NC 28201-1006 (Name and Address of Owner)

2. Plant: Oconee Nuclear Station, 7800 Rochester Highwav, Seneca. SC 29672 (Name and Address of Plant)

3. Plant Unit: 2 4. Owner Certificate of Authorization (if required) N/A

5. Commercial Service Date: September 1<1974 6. National Board Number for Unit N/A

7. Components Inspected:

Component or Manufacturer Manufacturer State or National Appurtenance Installer Installer Serial Province No. Board No. No. See Section 1.1 in the Attached Report Note: Supplemental sheets in the form of lists, sketches, or drawings may be used provided (1) size is 81/2 in. x 11 in., (2) information in items 1 through 6 on this data report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. Total number of pages contained in this report 363 .

FORM NIS-1 (Back)

8. Examination Dates June 15, 2004 to November 30, 2005

9. Inspection Period Identification: First Period

10. Inspection Interval Identification: Fourth Interval

11. Applicable Edition of Section XI 1998 Addenda 2000 -

12. Date/Revision of Inspection Plan: June 23, 2004 / Revision 0

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a. statement concerning status of work required for the Inspection Plan. See Sections 2.0. 3.0 and 6.0

14. Abstract of Results of Examination and Tests. See Sections 4.0 and 6.0

15. Abstract of Corrective Measures. See Subsection 4.3 We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section XI.

Certificate of Authorization No. (if applicable) NA Expiration Date NA Date I/3 /04 Signed Duke Energy Corp. ByG

                /     I}                              Owner CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of .4,arA'   w      cl.oz-Ajy employed by *The HSBI&I Co. of Connecticut have inspected the components described in this Owner's Report during the period

_-_o_ le_ to s.-s'- CaTm -, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in the Owner's Report in accordance with the Inspection Plan and as required by the ASMIE Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, test, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for amy personal injury or property damage or a loss of any kind arising from or connected with this inspection Commissions C/'/A),A9de Ins-p-tor's Signature National Board, State, Province, and Endorsements Date Z -S-C? 6

The Hartford Steam Boiler Inspection & Insurance Company of Connecticut.

200 Ashford Center North Suite 205 Atlanta, GA. 30338-4860 (800) 417-3721 www.hsbc.com

DISTRIBUTION LIST

1. Duke Energy Corporation Nuclear Quality Assurance and Oversight Division Quality Assurance Technical Services

2. NRC Document Control Desk

3. Hartford Steam Boiler Inspection and Insurance Company of Connecticut (AIA) c/o ANII at Oconee Note: The following personnel are to be notified via e-mail after the Inservice Inspection Report has been stored in the Nuclear Electronic Document Library:

GO Nuclear Assurance c/o Bruce Nardoci Inspection and Welding Services (ISI Coordinator)

TABLE OF CONTENTS Section Tiltle Revision 1.0 General Information 0 2.0 Fourth Ten Year Inspection Status 0 3.0 Final Inservice Inspection Plan 0 4.0 Results of Inspections Performed 0 5.0 Owners Report for Repair/Replacement Activities 0 6.0 Pressure Testing 0

1.0 General Information This report describes the Inservice Inspection of Duke Energy Corporation's Oconee Nuclear Station, Unit 2, during Outage 1/EOC 21. This is thei first outage in the first inspection period of the Fourth Ten-Year Interval. ASME Section Xl, 1998 Edition with the 2000 Addenda, was the governing Code for selection and performing of the ISI examinations. Included in this report are: the inspection status for each examination category, the final inservice inspection plan, the inspection results for each item examined, and corrective actions taken when reportable conditions were found. In addition, there is an Owner's Report for Repair/Replacement Section included for completed NIS-2 documentation of repairs and replacements. 1.1 Identification Numbers Manufacturer Item Manufacturer or Installer State or National or Installer _ Serial No. Province No. Board No. Reactor Vessel Babcock & Wilcox 620-0004-51-52 N/A N-105 Reactor Vessel Babcock & Wilcox 068S-02 N/A 209 Head (replaced head) Steam Generator A Babcock & Wilcox 006K03 N/A 207 Steam Generator B Babcock & Wilcox 006K04 N/A 208 Pressurizer Babcock & Wilcox 620-0004-59 N/A N-1 06 Main Steam Duke Power NA NA NA System Auxiliary Steam Duke Power NA NA NA System _ Feedwater System Duke Power NA NA NA Emergency Duke Power NA NA NA Feedwater System _ Steam Generator Duke Power NA NA NA Flush System _ Condensate Duke Power NA NA NA System _ EOC 21 Refueling Outage Report Page 1 of 4 Oconee Unit 2 Revision 0 Section 1 January 16, 2006

Manufacturer Item Manufacturer or Installer State or National or Installer Serial No. Province No. Board No. Vents and Exhaust Duke Power NA NA NA System _ Condenser Duke Power NA NA NA Circulating Water High Pressure Duke Power NA NA NA Service Water System Low Pressure Duke Power NA NA NA Service Water System _ Reactor Coolant Duke Power NA NA NA System _ High Pressure Duke Power NA NA NA Injection System _ Low Pressure Duke Power NA NA NA Injection System _ Reactor Building Duke Power NA NA NA Spray System _ Component Duke Power NA NA NA Cooling System _ Spent Fuel Cooling Duke Power NA NA NA System _ Vents - Reactor Duke Power NA NA NA Building Components _ Drains - Reactor Duke Power NA NA NA Building Components _ EOC 21 Refueling Outage Report Page 2 of 4 Oconee Unit 2 Revision 0 Section 1 January 16, 2006

1.2 Personnel. Equipment and Material Certifications All personnel who performed or evaluated the results of inservice inspections during the time frame bracketed by the examination dates shown on the NIS-1 Form were certified in accordance with the requirements of 1998 Edition of ASME Section Xi with the 2000 addenda including Appendix VII for ultrasonic inspections. In addition, ultrasonic: examiners were qualified in accordance with ASME Section Xl, Appendix VIII, and 1998 Edition with the 2000 Addenda through the Performance Demonstration Initiative (PDI) for similar metal piping welds and reactor vessel shell welds. The appropriate certification records for each inspector, calibration records for inspection equipment, and records of materials used (i.e., NDE consumables) are on file at Oconee Nuclear Station or copies can be obtained by contacting Duke Energy's Corporate Office in Charlotte, North Carolina. The copies of the certification records for Washington Group International inspectors and Atlantic Group inspectors can be obtained by contacting Duke Energy's Corporate Office in Charlotte, North Carolina. 1.3 Reference Documents The following reference documents apply to the inservice inspections performed during this report period. A copy may be obtained by contacting the ISI Plan Manager at Duke Energy's Corporate Office in Charlotte, North Carolina. Code Case N-460 (Applicable to items in this report where less than 100% coverage of the required weld examination volume was achieved.) These items are identified on the Run D that is located in Section 4 of this report. Duke Power Company Problem Investigation Process Report # 0-05-06919. This PIP was written to document a problem found with PZR Circumferential Head Weld documentation (Item [302.011.001) from a previous inspection in the third interval. Duke Power Company Problem Investigation Process Report # 0-05-07724. This PIP was written to document a problem found with work orders that were written to perform ISI on Unit 2 items during EOC-21 but the work orders were not scheduled to be completed until after the outage. Duke Power Company Problem Investigation Process Report # 0-05-08427. This PIP was written to track the Relief Request process for limited coverage on UT examinations of welds that were inspected during EOC-21 for Unit 2. Request for Relief 04-ON-01 5 (Allows Duke to exempt the examination for B03.160 items for the 4th interval.) EOC 21 Refueling Outage Report Page 3 of 4 Oconee Unit 2 Revision 0 Section 1 January 16, 2006

Request for Relief 03-006 (Allows Duke and Alternative for the Snubber Examinations required in IWF-5000 for the 4th interval.) 1.4 Augmented and Elective Examinations Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section Xl Code; therefore, it is exempt from ANII review, verification, and/or record certification. 1.5 Responsible Inspection Agency The Hartford Steam Boiler Inspection and Insurance Company of Connecticut is responsible for the third party inspections required by ASME Section Xl. Authorized Nuclear Inservice Inspector(s) Name: Gary Brouette, Nancy Slaughter, Randy Klein, Tom Wyatt and Ed Reyes Employer: The Hartford Steam Boiler Inspection & Insurance Company of Connecticut. Business Address: 200 Ashford Center North Suite 205 Atlanta, GA 30338-4860 (800) 417-3721 www.hsbct.com EOC 21 Refueling Outage Report Page 4 of 4 Oconee Unit 2 Revision 0 Section 1 January 16, 2006

2.0 Fourth Ten Year Interval Insnection Status The completion status of inspections required by the 1998 ASME Code Section XI, with the 2000 Addenda, is summarized in this section. The requirements are listed by the ASME Section Xl Examination Category as defined in Table IWB-2500-1 for Class 1 Inspections, Table IWC-2500-1 for Class 2 Inspections, and IWF-2500-1 for Class 1 and 2 Component Supports. Augmented inspections are also included. Class l Inspections Examination Inspections Inspections Percentage Deferral Category Description Required Completed Completed Allowed B-A Pressure Retaining Welds 6 Welds 0 Weld 0% Yes in Reactor Vessel _ B-B Pressure Retaining Welds 10 Welds 2 Welds 20% No in Vessels Other than Reactor Vessel _ B-D Full Penetration Welds of 38 4 11% Partial Nozzles in Vessels Inspections Inspections Inspection Program B . _ B-E Pressure Retaining Partial Penetration Welds in REFERENCE SECTION 6.0 OF THIS REPORT Vessels B-F Pressure Retaining 7 Welds 0 Welds 0% No Dissimilar Metal Welds _ B-G-1 Pressure Retaining Bolting 128 Items 40.33 Items 32% Yes Greater than 2 Inches in Diameter _ B-G-2 Pressure Retaining Bolting 16 Items 5 Items 31% No 2 Inches and Less in Diameter B-J Pressure Retaining Welds 165 Welds 16 Welds 10% No in Piping _ B-K Welded Attachments for 21 2 10% No Vessels, Piping, Pumps and Valves _ _

Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB and IWC 2500-1.

EOC 21 Refueling Outage Report Page 1 of 4 Oconee Unit 2 Revision 0 Section 2 January 16, 2006

Class 1 Inspections (Continued) Examination Inspections Inspections Percentage

Deferral Category Description Required Completed Completed Allowed B-L-1 Pressure Retaining Welds 1 Weld 0 Weld 0% Yes in Pump Casings B-L-2 Pump Casings 1 Casinq 0 Casing 0% Yes B-M-1 Pressure Retaining 1 Valve Body 0 Valve Body 0% Yes Welds in Valve Bodies Weld Weld B-M-2 Valve Bodies 4 Valves 0 Valves 0% Yes B-N-1 Interior of Reactor Vessel 3 Inspections 1 Inspection 33% No B-N-2 Welded Core Support 1 Inspection 0 Inspections 0% Yes Structures and Interior Attachments to Reactor Vessels _

B-N-3 Removable Core Support 1 Inspection 0 Inspections 0% Yes Structures _ _ B-0 Pressure Retaining Welds 1,2 Housing 4 Housing 33% Yes in Control Rod Housings Welds Welds _ B-P All Pressure Retaining Components REFERENCE SECTION 6.0 OF THIS REPORT B-Q Steam Generator Tubing N/A N/A l N/A N/A F-A Class 1 Component 37 Supports 7 Supports 19% No F1.10 & F1.040 Supports (Except items. Snubbers) _ F-A Class 1 Component ** F1.050 items Supports, Snubbers _ Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB and IWC 2500-1.

Inspected under Selected License Commitment 16.9.18 per Relief Request 03-006 EOC 21 Refueling Outage Report Page 2 of 4 Oconee Unit 2 Revision 0 Section 2 January 16, 2006

Class :2 Inspections Examination Inspections Inspections Percentage *Deferral Category Description Required Completed Completed Allowed C-A Pressure Retaining Welds 4 Welds 0 Welds 0% No in Pressure Vessels C-B Pressure Retaining Nozzle 4 Welds 2 Welds 50% No Welds in Vessels C-C Integral Attachments for 37 7 19% No Vessels, Piping, Pumps Attachments Attachments and Valves _ C-D Pressure Retaining Bolting 2 Items 0 Items 0% No Greater Than 2 Inches in Diameter _ _ C-F-1 Pressure Retaining Welds 166 Welds 24 Welds 14% No in Austenitic Stainless Steel or High Alloy Piping _ C-F-2 Pressure Retaining Welds 61 Welds 7 Welds 11% No in Carbon or Low Alloy Steel Piping C-G Pressure Retaining Welds N/A N/A N/A N/A in Pumps and Valves _ C-H All Pressure Retaining Components REFERENCE SECTION 6.0 OF THIS REPORT F-A Class 2 Component 135 Supports 20 Supports 15% No F1.020 & F1.040 Supports (Except items. Snubbers) _ F-A Class 2 Component ** F1.050 items Supports, Snubbers Deferral of inspection to the end of the interval as allowed by ASME Section Xi Tables IWB and IWC 2500-1.

- Inspected under Selected License Commitment 16.9.18 per Relief Request 03-006 EOC 21 Refueling Outage Report Page 3 of 4 Oconee Unit 2 Revision 0 Section 2 January 16, 2006

Augmented/E lective Inspections Augmented and elective examination information found within this Inservice' Inspection Report is not required by the ASME Section XI Code; therefore, it is exempt from ANII review, verification, and/or record certification. itemPecnaeCrplt Number Description Percentage Complete GO1.001 Reactor Coolant Pump Flywheel None scheduled for EOC 21 G02.001 HPI Nozzle Safe End Examinations None scheduled for EOC 21 G03.001 Pressurizer Surge Line Examinations None scheduled for EOC 21 G04.001 Thermal Stress Piping (NRC Bulletin None scheduled for EOC 21 88-08) G1i1.001.001 Reactor Pressure Vessel Head None scheduled for EOC 21 Penetration Nozzle by UT Examination per NRC Order EA-03-009. G1i1.001.002 Bare Metal Visual Examination of the None scheduled for EOC 21 Reactor Pressure Vessel Head Surface per NRC Order EA-03-009. H01.001 Pressurizer Sensing/ Sampling Nozzle None scheduled for EOC 21 Safe Ends H02.001 Class 1 RTE Mounting Bosses None scheduled for EOC 21 H03.001 Main Feedwater Piping in the East and 100% of EOC 21 Requirements West Penetration Rooms per QA-513J _(ER-ONS-04-03) H04.001 - Main Feedwater and Main Steam Piping 100% of EOC 21 Requirements Supports and Attachment Welds per OA-513J (ER-ONS-04-05) EOC 21 Refueling Outage Report Page 4 of 4 Oconee Unit 2 Revision 0 Section 2 January 16, 2006

3.0 Final Inservice Inspection Plan The final Inservice Inspection Plan shown in this section lists all ASME Section Xl Class 1, Class 2, Class 3, and Augmented examinations credited for this report period. The information shown below is a field description for the reporting format included in this section of the report: Item Number = ASME Section Xl Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2 ), Augmented Requirements ID Number - Unique Identification Number Sys = Component System Identification Iso / Dwg. Numbers = Location and/or Detail Drawings Proc = Examination Procedures Insp Req. = Examination Technique - Magnelic Particle, Dye Penetrant, etc. Mat / Sch. = General Description of Material Diam. / Thick = Diameter/Thickness Cal Blocks - Calibration Block Number Comments = General and/or Detail Description EOC 21 Refueling Outage Report Page 1 of 1 Oconee Unit 2 Revision 0 Section 3 January 16, 2006

EOC 21 V DUKE ENERGY CORPORATION CATEGORY B-B. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report Oconee 2 Page 1 Pressurizer 01116/2006 Inservice Inspection Plan for Interval 4 Outage 1 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI\AI 3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Shell-to-Head: Circumferential ****

B02.01 1.001 2-PZR-WP76 ISI-OCN2-002 NDE-640 UT CS 84.000 40338 Pressurizer Upper Head Pc. 5 to Upper Shell Circumferential 50 OM-1201-456 NDE-820 6.188 Course Pc. 1. Material thickness ranges from 6.50" Class A Head to to 4.750" due to taper of material. Shell Total B02.011 Items: 1

**** Shell-to-Head; Longitudinal ****

B02.012.001 2-PZR-WP1-1 ISI-OCN2-002 NDE-640 UT CS 0.000 40338 Pressurizer Upper Shell Course Pc. 1 to Upper Shell Longitudinal 50 OM-1201-456 NDE-820 6.188 Course Pc. 1. Class A Shell to Shell Total 80no Ite it2me 1 Total B02 Items: 2

EOC 21 % DUKE ENERGY CORPORATION CATEGORY B-D. Full Penetration Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report WHeat Exchangers (Primary Side) Oconee 2 Page 2 Inservice Inspection Plan for Interval 4 Outage 1 01/1612006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Nozzle-to-Vessel Welds ****

B03.150.001 2-LDCA-IN-V1 1-44773-1 See Corn UT SS 3.000 40411 Letdown Cooler 2A Tubeside Inlet Nozzle Pc. 5 to Circumferential 51A OM-201-3107 0.875 Channel Body Pc. 3. Class A O-ISIN4-101A-2.1 Nozzle to Procedure 3630 Channel Body B03.150.002 2-LDCA-OUT-V2 1-44773-1 See Corn UT SS 3.000 40411 Letdown Cooler 2A Tubeside Outlet Nozzle Pc. 5 to Circumferential 51A OM-201-3107 0.875 Channel Body Pc. 3. Class A O-ISIN4-101A-2.1 Nozzle to Procedure 3630 Channel Body Total B03.150 Items: 2

U EOC 21 I DUKE ENERGY CORPORATION CATEGORY B-D. Full Penetratikon Welded INSERVICE INSPECTION PLAN MANAGEMENT Nozzels In Vessels - Inspection Program B Inservice Inspection Database Management System Plan Report .leat Exchangers (Primary Side) Oconee 2 Page 3 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Nozzle Inside Radius Section ****

B03.160.001 2-LDCA-IN-V1 1-44773-1 TBD UT SS 3.000 TBD Letdown Cooler 2A Tubeside Inlet Nozzle Pc. 5to 51A OM-201-3107 0.875 Channel Body Pc. 3. (Inside Radius Section) Class A O-ISIN4-101A-2.1 Nozzle to This item is not to be inspected. A Relief Request Channel Body will be filed to exempt us from examining this item. B03.160.002 2-LDCA-OUT-V2 1-44773-1 TBD UT SS 3.000 TBD Letdown Cooler 2A Tubeside Outlet Nozzle Pc. 5 tc 51A OM-201-3107 0.875 Channel Body Pc. 3. (Inside Radius Section) Class A 0-ISIN4-101A-2.1 Nozzle to This item is not to be inspected. A Relief Request Channel Body will be filed to exempt us from examining this item. Total B03.160 Items: 2 Total B03 Items: 4

40, r M q EOC 21 A I DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retainin Bolting, INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Oconee 2 Page 4 Reactor Vessel 01/16/2006 Inservice Inspection Plan for Interval 4 Outage 1 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Closure Head Nuts ****

B06.010.001 2-RPV-26-204-01 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.002 2-RPV-26-204-02 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.003 2-RPV-26-204-03 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W 152009E 1.300 Class A B06.010.004 2-RPV-26-204-04 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.005 2-RPV-26-204-05 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W 152009E 1.300 Class A B06.010.006 2-RPV-26-204-06 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.007 2-RPV-26-204-07 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.008 2-RPV-26-204-08 OM-1201-4 QAL-1 3 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A

EOC 21 I K DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retaining Bolting. INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel Oconee 2 Page 5 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.009 2-RPV-26-204-09 OM-1 201-4 QAL- 13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.010 2-RPV-26-204-10 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.011 2-RPV-26-204-11 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W 152009E 1.300 Class A ifl 1%1foea Pt B06.0,0.012 2-RP finatirnflhit 204-12 Afl ^&A 4nfldfAlAl OM-1201- I wr% ICSP 0 RureNutPc.26. 50 B&W 152009E 1.300 Class A B06.010.013 2-RPV-26-204-13 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.014 2-RPV-26-204-14 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.015 2-RPV-26-204-15 OM-1 201-4 QAL-1 3 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300

    'ClassA B06.010.016   2-RPV-26-204-16          OM-1201-4              QAL-13         VT-1       CS       9.250       Reactor Vessel Closure Nut Pc. 26.

50 B&W152009E 1.300 Class A B06.010.017 2-RPV-26-204- 17 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A

e-Ur 96 f 'K EOC 21 k st DUKE ENERGY CORPORATION CATEGORY B-G-1 Pressure Retainina Bolting INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Oconee 2 Page 6 Reactor Vessel Inservice Inspection Plan for Interval 4 Outag 3el 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.018 2-RPV-26-204-18 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A B06.010.019 2-RPV-26-204-62 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W 152009E 1.300 Class A B06.010.020 2-RPV-26-204-20 OM-1201-4 QAL-13 VT-1 CS 9.250 Reactor Vessel Closure Nut Pc. 26. 50 B&W152009E 1.300 Class A Total B06.010 Items: 20

fr U1 EOC 21 I > DUKE ENERGY CORPORATION CATEGORY B-G-1 Pressure Retaining Bolting, INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report EReactor Vessel Oconee 2 Page 7

Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Closure Studs, when removed ****

B06.030.001 2-RPV-25-204-01 OM-1201-4 See Com UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W 152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.002 2-RPV-25-204-02 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.003 2-RPV-25-204-03 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.004 2-RPV-25-204-64 OM-1201-4 See Com UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.005 2-RPV-25-204-05 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.006 2-RPV-25-204-06 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.007 2-RPV-25-204-07 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDi-UT-5. Class A B06.030.008 2-RPV-25-204-08 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W 152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A

e- f1 EOC 21 k DUKE ENERGY CORPORATION CATEGORY B-G-1 Pressure Retaining Boltinc, INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel Oconee 2 Page 8 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.009 2-RPV-25-204-09 OM-1201-4 See Com UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.01 0 2-RPV-25-204-1 0 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.011 2-RPV-25-204-11 OM-1201-4 See Com UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A DB0. 00f 1 2 - D2-PV-25-2')0A4-12 OAM-12014 A S Com "IT CS 6.500 4A0420 R-ator V.ssGI ClosurG Stud Pc. 2255-

                                                                                                                                                    =fmmoved.

50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.013 2-RPV-25-204-13 OM-1201-4 See Com UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.014 2-RPV-25-204-14 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.015 2-RPV-25-204-15 OM-1201-4 See Com UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25- Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. C!- AI A B06.030.016 2-RPV-25-204-16 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25- Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.017 2-RPV-25-204-17 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25- Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A

EOC 21 t I DUKE ENERGY CORPORATION CATEGORY B-G-1, Pressure Retain miq Bolting. INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report WReator Vessel Oconee 2 Page 9 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.018 2-RPV-25-204-18 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.019 2-RPV-25-204-19 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A B06.030.020 2-RPV-25-204-20 OM-1201-4 See Corn UT CS 6.500 40420 Reactor Vessel Closure Stud Pc. 25 - Removed. 50 B&W152009E 0.000 Stud Length = 63.250. Procedure # PDI-UT-5. Class A Total B06.030 items: 20

EOC 21 I DUKE ENERGY CORPORATION ( CATEGORY B-G-1. Pressure Retaining Bolting, INSERVICE INSPECTION PLAN MANAGEMENT Greater Than 2 in. In Diameter Inservice Inspection Database Management System Plan Report

Reactor Vessel Oconee 2 Page 10 N Inservice Inspection Plan for Interval 4 Outag, e1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAAL BLOCKS COMMENTS

 **** Closure Washers, Bushings ****

B06.050.001 2-RPV-WASH-BUSH B&W152009E QAL-13 VT-1 CS 9.750 Reactor Vessel Closure Washers and Bushings. 50 0.000 Stud Holes 1 thru 20. Class A Total B06.050 Items: 1 Total B06 Items: 41

EOC 21 I I0-DUKE ENERGY CORPORATION CATEGORY B-G-2. Pressure Retaining Bolting, 2 INSERVICE INSPECTION PLAN MANAGEMENT in. And Less In Diameter Inservice Inspection Database Management System Plan Report

Pressurizer Oconee 2 Page 1 1 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Bolts, Studs, and Nuts ****

B07.020.001 2-PZR-UHB-STUDS B&W149775E QAL-13 VT-1 CS 2.000 Pressurizer Upper Heater Bundle Studs Pc. 75 and 50 0.000 Nuts. 16 Studs, Length = 19.312". Examine all Class A studs and nuts. Total B07.020 Items: 1

EOC 21 C DUKE ENERGY CORPORATION CATEGORY B-G-2. Pressure Retaining Bolting. 2 INSERVICE INSPECTION PLAN MANAGEMENT in. And Less In Diameter Inservice Inspection Database Management System Plan Report Stearn Generators Oconee 2 Page 12 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA(THK CAL BLOCKS COMMENTS

 **** Bolts, Studs, and Nuts ****

B07.030.001 2-SGA-UMW-STUDS OM-201.S-0001 QAL-1 3 VT-1 SS 2.000 Steam Generator 2A Upper Head Manway Studs 50 OM-201.S-0170 0.000 and Nuts. (16 Studs & Nuts) Class A OM-201.S-0171 Examine all studs and nuts. Stud Length =19.63 inches. B07.030.002 2-SGA-LMW-STUDS OM-201.S-0001 QAL-13 VT-1 SS 2.000 Steam Generator 2A Lower Head Manway Studs 50 OM-201.S-0158 0.000 and Nuts. (16 Studs & Nuts) Class A OM-201.S-0171 Examine all studs and nuts. Stud Length =19.63 inches. Total B07.030 Items: 2

EOC 21 4 Ilf DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaining Bolting. 2 INSERVICE INSPECTION PLAN MANAGEMENT in. And Less In Diameter Inservice Inspection Database Management System Plan Report 0131ping Oconee 2 Page 13 01/16/2006 w - Inservice Inspection Plan for Interval 4 Outage 1 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

 **** Bolts, Studs, and Nuts ****

B07.050.001 2-PZR-RC4-STUDS OM-245-2012 QAL-13 VT-1 CS 1.125 Pressurizer EMO Valve 2RC-4 Inlet Flange Studs 50 0.000 W-Z Quadrant. Class A 8 Studs, Length = 8.750". Examine all studs and nuts. Total B07.050 Items: 1

A'- EOC 21 1 l DUKE ENERGY CORPORATION CATEGORY B-G-2, Pressure Retaining Bolting. 2 INSERVICE INSPECTION PLAN MANAGEMENT in. And Less In Diameter Inservice Inspection Database Management System Plan Report Oconee 2 Page 14 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Bolts, Studs, and Nuts ****

B07.070.003 2-53A-CF1 3-STUDS OM-245-001 QAL-13 VT-1 CS 1.125 B-Side Core Flood 14" Valve 2CF-13 Bolting. 53A O-ISIN4-102A-2.3 0.000 Y Axis. Inspect one of the following valves: 2CF-1 1, Class A 2CF-12,2CF-13, or 2CF-14. Examine all studs and nuts. Total B07.070 Items: 1 Total B07 Items: 5

EOC 21 4- O DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Pipinq Inservice Inspection Database Management System Plan Report NPS 4 or Larger Oconee 2 Page 15 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Circumferential Welds

B09.01 1.001 2-PSL-8 ISI-OCN2-015 NDE-600 UT Ss 10.000 See Corn Pressurizer Surge Piping. Elbow Pc. 80 to Pipe Pc.

Circumferential 50 O-ISIN4-100A-2.2 See Corn 1.000 84. Depending upon the examiners qualifications, Class A Stress weld Pipe to procedure PDI-UT-2 may be used in lieu of Elbow procedure NDE-600. If PDI-UT-2 is used, calibration block PDI-UT-2-O should be used. B09.011.001A 2-PSL-8 ISI-OCN2-015 NDE-35 PT SS 10.000 Pressurizer Surge Piping. Elbow Pc. 80 to Pipe Pc. Circumferential 50 O-ISIN4-10OA-2.2 1.000 84. Class A Stress weld Pipe to Elbow B09.011.030 2-PIB2-4 ISI-OCN2-010 NDE-600 UT CS 33.500 See Corn Reactor Coolant Pump 2B2 Suction Piping. Pipe Circumferential 50 OM-1201-966 See Corn 2.330 Pc. 63 to Elbow Pc. 62. Depending upon the A iias elss ass

              -)rs     weldu Poa,     teminers
                                                                                *i.,- to es;a             niialifications, nrorereim
                                                                                                                           ***,o**-e*-                  -    .-.

Pni-i E. IT-1 may my Elbow be used in lieu of procedure NDE-600. If PDI-UT-1 is used, calibration block PDI-UT-1 -O should be used. B09.011.030A 2-PIB2-4 ISI-OCN2-010 NDE-25 MT CS 33.500 Reactor Coolant Pump 2B2 Suction Piping. Pipe Circumferential 50 OM-1201-966 2.330 Pc. 63 to Elbow Pc. 62. Class A Stress weld Pipe to Elbow B09.011.203 2LP-189-1 2LP-189 NDE-600 UT SS 10.000 See Com This weld was listed previously as 2-53A-8-1 on iso Circumferential 53A O-ISIN4-102A-2.3 See Com 1.000 2-53A-8(1) until it was transferred to iso 2LP-189. Class A Pipe to Depending upon the examiners qualifications, Elbow Procedure PDI-UT-2 may be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. B09.011.203A 2LP-189-1 2LP-189 NDE-35 PT SS 10.000 This weld was listed previously as 2-53A-8-1 on iso Circumferential 53A O-ISIN4-102A-2.3 1.000 2-53A-8(1) until it was transferred to iso 2LP-189. Class A Pipe to Elbow B09.011.208 2-53A-8-48 2-53A-8(2) NDE-600 UT SS 14.000 See Com Denendina upon the examiners qualifications.

                                                                                                                    - -r-- -- xt-ry-                         -----          a Circumferential       53A 0-ISIN4-102A-2.3         See Com                            1.250           procedure PDI-UT-2 may be used in lieu of Class A                                                                    Pipe to                               procedure NDE-600. If PDI-UT-2 is used, calibration Elbow                                 block PDI-UT-2-O should be used.

EOC 21 I I I DUKE ENERGY CORPORATION CATEGORY B-J, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report Oconee 2 Page 16 NPS 4 or Larger Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NU MBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B09.011.208A 2-53A-8-48 2-53A-8(2) NDE-35 PT SS 14.000 Circumferential 53A O-ISIN4-102A- 2.3 1.250 Class A Pipe to Elbow B09.011.209 2-53A-8-50 2-53A-8(2) NDE-600 UT SS 14.000 See Corn Depending upon the examiners qualifications, Circumferential 53A O-ISIN4-102A-2.3 See corn 1.250 procedure PDI-UT-2 may be used in lieu of Class A Pipe to procedure NDE-600. If PDI-UT-2 is used, calibration Elbow block PDI-UT-2-O should be used. B09.011.209A 2-53A-8-50 2-53A-8(2) NDE-35 PT SS 14.000 Circumferential 53A O-ISIN4-102A-2.3 1.250 Class A Pipe to Elbow Total B09.01i items: i0

EOC 21 q I DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report Less Than NPS 4 Oconee 2 Page 17 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

 **** Circumferential Welds B09.021.004      2-PDA1-11             ISI-OCN2-011             NDE-35         PT       SS-CS        3.500     Reactor Coolant Pump 2A1 Discharge Piping.

Circumferential 50 B&W146829E 0.750 Nozzle Pc. 46 to Safe End Pc. 47. Class A Stress weld Nozzle to This weld was cut out and welded back in EOC-20. Dissimilar Safe End The new weld is also listed as weld 29 on rev . 11 of iso 2RC-204. B09.021.010 2-PIB1 -11 ISI-OCN2-009 NDE-35 PT CS-lnconel 3.500 Reactor Coolant Pump 2B1 Suction Piping. Nozzle Circumferential 50 B&W146635E 0.672 Pc. 87 to Safe End Pc. 88. Class A Stress weld Nozzle to Dissimilar Safe End B09.021.123 2-51A-147-17 2-51A-147 NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.1 0.375 Ciass A Pipe to Reducer B09.021.134 2-51A-35-43 2-51A-35 (2) NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.1 0.375 Class A Tee to Valve 2HP-1 B09.021.135 2-51A-35-55 2-51A-35 (2) NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.1 0.375 Class A Tee to Pipe B09.021.136 2-51A-35-56 2-51A-35 (2) NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.1 0.375 Class A Pipe to Elbow BU.U21.201 2LP-15-1 2LP--i 5i NDE-35 PT Ss 3.000 This wid was prpviousy lisited as 2-53A-36-i unil Circumferential 53A O-ISIN4-102A-2.1 0.438 iso 2-53A-36 was redrawn. Class A Valve 2LP-103 to Pipe Total B09.021 Items: 7

EOC 21 DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retaininq Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report E1Branch Pipe Connection Welds Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Page 18 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Less Than NPS 4 ****

B09.032.004 2-PDB1-12 ISI-OCN2-013 NDE-35 PT SS 12.000 Reactor Coolant Pump 2B1 Discharge Piping. Branch 50 OM-1201-966 2.250 Pressurizer Spray Nozzle Pc. 51 to Safe End Pc. 49. Stress weld B&W146630E Nozzle to NPS of Branch Piping is 2.5 inches. Class A Safe End B09.032.201 2LP-151-21 2LP-151 NDE-35 PT SS 3.000 Isometric 2LP-151 was issued to transfer welds from Branch 53A O-ISIN4-102A-2.1 0.438 2-53A-35. This weld number used to be Pipe to 2-53A-35-1. Class A Pipe Total B09.032 Items: 2

EOC 21 _ C DUKE ENERGY CORPORATION CATEGORY B-J, Pressure Retaining Welds In IN SERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report MSocket Welds Oconee 2 Page 19 service Inspection Plan for Interval 4 Outage 1 01/16/2006 E MINN ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B09.040.002 2RC-271-13A 2RC-271 NDE-35 PT SS 1.500 This weld was listed previously as 2-50-129-13A Socket 50 O-ISIN4-100A-2.2 0.281 until iso 2-50-129 was deleted and all welds were Class A Tee to tranferred to iso 2RC-271. Pipe B09.040.007 2-50-7-124 2-50-7 (1) NDE-35 PT SS 1.500 Socket 60 O-ISIN4-100A-2.1 0.281 Class A Pipe to Elbow Total B09.040 Items: 2 Total B09 Items: 21

EOC 21 jf I 0I DUKE ENERGY CORPORATION CATEGORY B-K. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping. Pumps. And Valves Inservice Inspection Database Management System Plan Report Oconee 2 Page 20 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWC3 NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Welded Attachments ****

B1 0.020.001 2-50-0-1481 A-H3 0-2RB-25: 314-01 NDE-35 PT NA 2.500 Calculation No. OSC-1324-06. Hyd Snubber 50 O-ISIN4-1 OOA-2.2 0.154 Inspect with F01.012.002. Class A B10.020.031 2-53A-0-1479A-H8B 0-1492C-2(s) NDE-35 PT NA 10.000 Calculation No. OSC-1 318. Spring Hgr 53A O-ISIN4-102A-2.3 1.250 Inspect with F01 .012.032. Class A Total B10.020 Items: 2 Total B10 Items: 2

EOC 21 1 DUKE ENERGY CORPORATION F CATEGORY B-N-1, Interior Of Reactor Vessel INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Reactor Vessel Oconee 2 Page 21 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Vessel Interior ****

B13.010.001 2-RPV-INT-SURFACE B&W 152008E QAL-14 VT-3 SS 0.000 Reactor Vessel Interior. Areas to be examined shall 50 ISI-OCN2-001 See Corn 0.000 include the spaces above and below the Reactor Class A Core that are made accessible for examination by removal of components during normal refueling outages. Reference Framatome Procedure 54-ISI-364-00. Total B13.010 Items: 1 Total B13 Items: 1

Al-EOC 21 ^- 4 DUKE ENERGY CORPORATION CATEGORY B-O. Pressure Retaininq Welds In INSERVICE INSPECTION PLAN MANAGEMENT Control Rod Housings Inservice Inspection Database Management System Plan Report Reactor Vessel Oconee 2 Page 22 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Welds in CRD Housing ****

B14.010.003 2-RPV-CRD-63WH9 OM-1201-1529 NDE-35 PT SS-Inconel 4.025 CRDM #63 Housing Body to Adapter. 50 OM-1201-1530 0.650 Class A Housing Body to Dissimilar Adapter B14.010.006 2-RPV-CRD-63W60 OM-1201-1530 NDE-35 PT SS-CS 5.000 CRDM #63 Base to Motor Tube. 50 OM-2201-1085 0.500 Class A Base to Motor Tube B14.010.009 2-RPV-CRD-63 OM-1201-1530 NDE-35 PT SS-CS 4.300 CRDM #63 Motor Tube to Extension. 50 OM-2201 -1085 0.400 Class A Motor Tube to Extension B14.010.012 2-RPV-CRD-63W61 OM-1201-1530 NDE-35 PT SS 4.190 CRDM #63 Extension to Cap. 50 OM-2201-1085 0.380 Class A Extension to Cap Total B14.010 Items: 4 Total B14 Items: 4

EOC 21 DUKE ENERGY CORPORATION CATEGORY C-B. Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels Inservice Inspection Database Management System Plan Report LNozzles With Reinforcing Plate in Vessels > 1/2 in. Nom. Thickness Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Page 23 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Reinforcing Plate Welds to Nozzle and Vessel ****

C02.031.001 2-LPCB-INLET OM-201 -0286 NDE-35 PT SS 16.000 Decay Heat Cooler 2B Inlet Nozzle Reinforcing Circumferential O-ISIN4-102A-2.2 0.625 Plate Welds to Nozzle and Vessel. Class B Nozzle to Shell C02.031.002 2-LPCB-OUTLET NDE-35 PT SS 16.000 Decay Heat Cooler 2B Outlet Nozzle Reinforcing Circumferential OM-201-0286 0.625 Plate Welds to Nozzle and Vessel. Class B O-ISIN4-102A-2.2 Nozzle to Shell Total C02.031 Items: 2 Total C02 Items: 2

EOC 21 I Ap-C DUKE ENERGY CORPORATION CATEGORY C-C, Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping. Pumps. And Valves Inservice Inspection Database Management System Plan Report Oconee 2 Page 24 Pressure Vessels 01/16/2006 Inservice Inspection Plan for Interval 4 Outage 1 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMI 3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Welded Attachments ****

C03.010.003 2-RCSR-COOLER-A OM-201-086 NDE-35 PT SS 0.000 Reactor Coolant Seal Return Cooler 2A. O-ISIN4-101A-2.1 0.000 Class B Support Attachment to Shell Total C03.010 Items: 1

EOC 21 I I DUKE ENERGY CORPORATION CATEGORY C-C. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping. Pumps, And Valves Inservice Inspection Database Management System Plan Report Oconee 2 Page 25 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Welded Attachments ****

C03.020.001 2-01A-0-1441-H1 2-01-01/sht.1 NDE-25 MT NA 36.000 Calculation No. OSC-440. Inspect with F01.022.001. Spring Hgr 01A O-ISIN4-122A-2.1 0.500 Class B C03.020.013 2-03A-1439A-RL-0901 2-03A-08/sht.3 NDE-25 MT NA 6.000 Calculation No. OSC-449. Inspect with F01.020.014. Rigid Support 03A O-ISIN4-121D-2.1 0.500 Class B C03.020.021 2-14B-0-1479A-H11E 0-2RB-21410-04 NDE-25 MT NA 8.000 Calculation No. OSC-1325-09. Inspect with Rigid Restraint 14B O-ISIN4-124B-2.2 1.500 F01.021.023. Class B C03.020.045 2-53B-2-0-436E-H1O 0-2AB-25102-02 NDE-35 PT NA 6.000 Calculation No. OSC-481. Inspect with F01.020.071. Rigid Support 53B O-ISIN4-101A-2.3 0.216 Class B C03.020.053 2-54A-3-0-1444-R3 2-54-03/sht.2 NDE-35 PT NA 8.000 Calculation No. OSC-496. Inspect with F01.021.073. Rigid Restraint 54A O-ISIN4-103A-2.1 0.500 Class B C03.020.054 2-54A-3-0-1444-Hi 2-54-1/sht.1 NDE-35 PT NA 8.000 Calculation No. OSC-494. Inspect with F01.020.097. Rigid Support 54A O-ISIN4-103A-2.1 0.500 Class B Total C03.020 Items: 6 Total C03 Items: 7

Av- Afs g 9 EOC 21 '- DUKE ENERGY CORPORATION CATEGORY C-F-i. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or Hiah Alloy Pioing Inservice Inspection Database Management System Plan Report

PiDina Welds >= 3/8 in. Nominal Wall Thickness Oconee 2 Page 26 forPiping > NPS 4 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Circumferential Weld C05.011.001      2LP-148-16             2LP-148                 NDE-600        UT        SS      10.000  See Corn This weld was previously listed as 2-53A-8-16 until Circumferential    53A O-ISIN4-102A-2.2          See Com                           1.125           iso 2-53A-8(1) was redrawn.

Class B Pipe to Depending upon the examiners qualifications, Valve 2LP-47 Procedure PDI-UT-2 may be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. C05.011.001A 2LP-148-16 2LP-148 NDE-35 PT SS 10.000 This weld was previously listed as 2-53A-8-16 until Circumferential 53A O-ISIN4-102A-2.2 1.125 iso 2-53A-8(1) was redrawn. Class B Pipe to Valve 2LP-47 C05.011.002 2LP-1 48-17 2LP-148 NDE-600 UT SS 10.000 See Corn This weld was previously listed as 2-53A-8-17 until Circumferentiai 53A O-iSiN4-102A-2.2 SeeCom 1.125 1. Class B Pipe to Depending upon the examiners qualifications, Elbow Procedure PDI-UT-2 may be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. C05.011.002A 2LP-148-17 2LP-148 NDE-35 PT SS 10.000 This weld was previously listed as 2-53A-8-17 until Circumferential 53A O-ISIN4-102A-2.2 1.125 iso 2-53A-8(1) was redrawn. Class B Pipe to Elbow C05.011.003 2LP-148-18 2LP-148 NDE-600 UT SS 10.000 See Corn This weld was previously listed as 2-53A-8-18 until Circumferential 53A O-ISIN4-102A-2.2 See Corn 1.125 iso 2-53A-8(1) was redrawn. Depending upon the Class B Pipe to examiners qualifications, Procedure PDI-UT-2 may Elbow be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. C05.011.003A 2LP-148-18 2LP-148 NDE-35 PT SS 10.000 This weld was previously listed as 2-53A-8-18 until Circumferential 53A O-ISIN4-102A-2.2 1.125 iso 2-53A-8(1) was redrawn. Class B Pipe to Elbow Total C05.011 Items: 6

A-EOC 21 %_ DUKE ENERGY CORPORATION CATEGORY C-F-1, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or Hiah Allov Pining Inservice Inspection Database Management System Plan Report

Pioinai Welds > 1/5 in. Nom Wall for Pipina >= Oconee 2 Page 27 NPS2and<=NPS4 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DV iG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Circumferential Weld ****

C05.021.001 2-RCP-FTR2A-SH-1 NDE-12 RT SS 4.000 Reactor Coolant Pump Seal Supply Filter 2A. Pc. Circumferential 51A OM-201-0473 0.531 10 to Pc. 1. Class B Term end O-ISIN4-101A-2.4 Filter Hub to Filter Housing C05.021.001A 2-RCP-FTR2A-SH-1 NDE-35 PT SS 4.000 Circumferential 51A OM-201-0473 0.531 Class B Term end O-ISIN4-101A-2.4 Filter Hub to Filter Housing C05.021.002 2-RCP-FTR2A-SH-2 NDE-12 RT SS 4.000 Reactor Coolant Pump Seal Supply Filter 2A Pc. 10 Circumferential 51A OM-201-0473 0.531 to Pc. 1. Class B Term end O-ISIN4-101A-2.4 Filter Hub to Fiiter Housing C05.021.002A 2-RCP-FTR2A-SH-2 NDE-35 PT SS 4.000 Circumferential 51A OM-201-0473 0.531 Class B Term end O-ISIN4-101A-2.4 Filter Hub to Filter Housing C05.021.006 2-51A-129-9 2-51A-129 NDE-600 UT SS 4.000 See Coin Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.4 See Coin 0.531 Procedure PDI-UT-2 may be used in lieu of Class B Elbow to Procedure NDE-600. If PDI-UT-2 is used, Pipe Calibration Block PDI-UT-2-O should be used. C05.021.006A 2-51A-129-9 2-51A-129 NDE-35 PT SS 4.000 Circumferential 51A O-ISIN4-101A-2.4 0.531 Class B Elbow to Pipe C05.021.024 2-51A-17-100A 2-51A-17 (4) NDE-600 UT SS 4.000 See Coin Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.3 See Coin 0.531 Procedure PDi-UT-2 may be used i,-i iieu of Class B Tee to Procedure NDE-600. If PDI-UT-2 is used, Pipe Calibration Block PDI-UT-2-O should be used. C05.021.024A 2-51A-17-100A 2-51A-17 (41 NDE-35 PT SS 4.000 Circumferential 51A 0-1SIN4-101A-2.3 0.531 Class B Tee to Pipe

EOC 21 11 It ( DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or High Alloy Piping Inservice Inspection Database Management System L1Pininia Welds > 1/5 in. Nom Wall for Pipina >= NPS 2 and <= NPS 4 Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Plan Report Page 28 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS C05.021.025 2-51A-17-101 2-51A-17 (4) NDE-600 UT SS 4.000 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.3 See Corn 0.531 Procedure PDI-UT-2 may be used in lieu of Class B Tee to Procedure NDE-600. If PDI-UT-2 is used, Tee Calibration Block PDI-UT-2-O should be used. C05.021.025A 2-51A-17-101 2-51A-17 (4) NDE-35 PT SS 4.000 Circumferential 51 A O-ISIN4-101A-2.3 0.531 Class B Tee to Tee C05.021.026 2-51A-17-111 2-51A-17 (5) NDE-600 UT SS 4.000 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.3 See Corn 0.531 Procedure PDI-UT-2 may be used in lieu of Class B Pipe to Procedure NDE-600. If PDI-UT-2 is used, Valve 2HP-128 Calibration Block PDI-UT-2-O should be used. C105.021.0260AIrt-U-I.;OP 2--51A-1-11 tiII-I 2-1A1 Uir Ir I I~ NI-3rTe4.0 Li) --. J3 PdLI F I J t.'Jvl Circumferential 51A O-ISIN4-101A-2.3 0.531 Class B Pipe to Valve 2HP-128 C05.021.027 2HP-227-3 2HP-227 NDE-600 UT SS 4.000 See Corn This weld was listed previously as 2-51A-17-142 Circumferential 51A O-ISIN4-101A-2.3 See Corn 0.531 until iso 2-51A-17(6) was redrawn. Depending upon Class B Pipe to the examiners qualifications, Procedure PDI-UT-2 Valve 2HP-1 17 may be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. C05.021.027A 2HP-227-3 2HP-227 NDE-35 PT SS 4.000 This weld was listed previously as 2-51A-17-142 Circumferential 51A O-ISIN4-101A-2.3 0.531 until iso 2-51A-17(6) was redrawn. Class B Pipe to Valve 2HP-1 17 C05.021.028 2HP-227-7 2HP-227 NDE-600 UT SS 4.000 See Corn This weld was listed previously as 2-51 A-1 7-146 Circumferential 51A 0-ISIN4-101A-2.3 See Corn 0.531 until iso 2-51A-17(6) was redrawn. Depending upon Class B Pipe to the examiners qualifications, Procedure PDI-UT-2 Valve 2HP-148 may be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. C05.021.028A 2HP-227-7 2HP-227 NDE-35 PT SS 4.000 This weld was listed previously as 2-51 A-17-146 Circumferential 51A 0-ISIN4-101A-2.3 0.531 until iso 2-51A-17(6) was redrawn. Class B Pipe to Valve 2HP-148

or EOC 21 - t DUKE ENERGY CORPORATION CATEGORY C-F-i. Pressure Retaininq Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or High Alloy Piping EPipino Welds > 1/5 in. Nom Wall for Piping >= NPS 2 and <= NPS 4 Inservice Inspection Database Management System Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Plan Report Page 29 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C05.021.073 2-51A-28-67 2-51A-28 (3) NDE-600 UT SS 2.500 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.4 See Corn 0.375 Procedure PDI-UT-2 may be used in lieu of Class B Tee to Procedure NDE-600. If PDI-UT-2 is used, Pipe Calibration Block PDI-UT-2-O should be used. C05.021.073A 2-51A-28-67 2-51A-28 (3) NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.4 0.375 Class B Tee to Pipe C05.021.074 2-51A-28-69 2-51A-28 (3) NDE-600 UT SS 2.500 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.4 See Corn 0.375 Procedure PDI-UT-2 may be used in lieu of Class B Elbow to Procedure NDE-600. If PDI-UT-2 is used, Pipe Calibration Block PDI-UT-2-O should be used. Ci5.021.074A 2-5iA-28-69 2-51A-28 (3) NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.4 0.375 Class B Elbow to Pipe C05.021.075 2-51 A-33-1 0 2-51 A-33 NDE-600 UT SS 2.500 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.1 See Corn 0.375 Procedure PDI-UT-2 may be used in lieu of Class B Pipe to Procedure NDE-600. If PDI-UT-2 is used, Elbow Calibration Block PDI-UT-2-O should be used. C05.021.075A 2-51A-33-10 2-51A-33 NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.1 0.375 Class B Pipe to Elbow C05.021.076 2-51A-33-13 2-51A-33 NDE-600 UT SS 2.500 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.1 See Corn 0.375 Procedure PDI-UT-2 may be used in lieu of Class B Elbow to Procedure NDE-600. If PDI-UT-2 is used, Pipe Calibration Block PDI-UT-2-O should be used. C05.021.076A 2-51A-33-13 2-51 A-33 NDE-35 PT SS 2.500 Circumferential 51A O-ISIN4-101A-2.1 0.375 Class B Elbow to Pipe C05.021.081 2-51A-27-3 2-51A-27 (1) NDE-600 UT SS 4.000 See Corn Depending upon the examiners qualifications, Circumferential 51A 0-ISIN4-IOIA-2.4 See Corn 0.531 Procedure PDI-UT-2 may be used in lieu of Class B Elbow to Procedure NDE-600. If PDI-UT-2 is used, Pipe Calibration Block PDI-UT-2-O should be used.

F EOC 21 'k _ DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or High Alloy Piping EPipina Welds > 1/5 in. Nom Wall for Piping >= NPS 2 and <= NPS 4 Inservice Inspection Database Management System Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Plan Report Page 30 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C05.021.081A 2-51A-27-3 2-51A-27 (1) NDE-35 PT SS 4.000 Circumferential 51A O-ISIN4-101A-2.4 0.531 Class B Elbow to Pipe C05.021.087 2-51A-27-21 2-51A-27 (1) NDE-600 UT SS 4.000 See Corn Depending upon the examiners qualifications, Circumferential 51A O-ISIN4-101A-2.4 See Com 0.531 Procedure PDI-UT-2 may be used in lieu of Class B Pipe to Procedure NDE-600. If PDI-UT-2 is used, Elbow Calibration Block PDI-UT-2-0 should be used. C05.021.087A 2-51A-27-21 2-51A-27 (1) NDE-35 PT SS 4.000 Circumferential 51A O-iSIN4-101A-2.4 0.531 Class B Pipe to Elbow Aq ua..f.c.t C05.021.093 2-51 A-28-30 2-51 A-28 ()

j
n i ,enn NDE-60
irft UI A 4.000 S CoI...... DRr..

e pefid0....h DepJnInI upon thee exaIne.s qua'IIII Circumferential 51A O-ISIN4-10OA-2.4 See Com 0.531 Procedure PDI-UT-2 may be used in lieu of Class B Pipe to Procedure NDE-600. If PDI-UT-2 is used, Valve 2HP-1 34 Calibration Block PDI-UT-2-O should be used. C05.021.093A 2-51A-28-30 2-51A-28 (1) NDE-35 PT SS 4.000 Circumferential 51A O-ISIN4-101A-2.4 0.531 Class B Pipe to Valve 2HP-134 C05.021.099 2HP-212-24 2HP-212 NDE-600 UT SS 2.500 See Com This weld used to be listed as 2-51A-33-24 and was Circumferential 51A O-ISIN4-101A-2.1 See Corn 0.375 shown on isometric 2-51A-33. Depending upon the Class B Pipe to examiners qualifications, Procedure PDI-UT-2 may Elbow be used in lieu of Procedure NDE-600. If PDI-UT-2 is used, Calibration Block PDI-UT-2-O should be used. 0fl5_091 .099A 2HP-?12-94 9HP-212 NDE-35 PT SS 2.500 This weld used to be listed as 2-51A-33-24 and was Circumferential 51A O-ISIN4-101A-2.1 0.375 shown on isometric 2-51A-33. Class B Pipe to Elbow Total C05.021 Items: 32

EOC 21 %_ r DUKE ENERGY CORPORATION CATEGORY C-F-i. Pressure Retaininq Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or High Alloy Piping Inservice Inspection Database Management System Plan Report Mocket Welds Oconee 2 Page 31

Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C05.030.001 2-51 B-1 8-48 2-51 B-1 8 NDE-35 PT SS 2.000 Socket 51 B O-ISIN4-101A-2.2 0.154 Class B Pipe to Elbow C05.030.007 2LP-98-10 2LP-98 NDE-35 PT SS 10.000 Socket 53B O-ISIN4-102A-2.2 0.375 Class B Flange to Reducer C05.030.008 2LP-97-13 2LP-97 NDE-35 PT SS 10.000 Socket 53B O-ISIN4-102A-2.2 0.375 Class B OM 201-286 Flange to Reducer C05.030.009 2HP-451-44 2HP-451 NDE-35 PT SS 4.000 This weld was listed previously as 2-51A-17-44 on Socket 51A O-ISIN4-101A-2.3 0.237 iso 2-51A-17(1) until it was transferred to iso Class B Term end Elbow to 2HP-451.

Flange Total C05.030 Items: 4

EOC 21 IV DUKE ENERGY CORPORATION k CATEGORY C-F-1, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Austenitic SS Or High Alloy Piping Inservice Inspection Database Management System Plan Report EPPine NPS 2 Branch Connections of Branch Piping >= Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Page 32 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Circumferential Weld ****

C05.041.001 2LP-96-13 2LP-96 NDE-35 PT SS 6.000 Branch 53B O-ISIN4-102A-2.2 0.280 Class B Pipe to Pipe Total C05.041 Items: 1

EOC 21 I k DUKE ENERGY CORPORATION CATEGORY C-F-2. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Carbon Or Low Alloy Steel PiDinai Inservice Inspection Database Management System Plan Report

Pioin, Welds >= 3/8 in. Nominal Wall Thickness Oconee 2 Page 33 Mfor Piping > NPS 4 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Circumferential Weld ****

C05.051.007 2MS-124-69V 2MS-124 NDE-600 UT CS 24.000 See Corn S/G 2A Main Steam Nozzle to Reducer weld. Circumferential 01A O-ISIN4-122A-2.1 See Coin 0.969 Depending upon the examiners qualifications, Class B Term end Reducer to Procedure PDI-UT-1 may be used in lieu of Nozzle S/G 2A Procedure NDE-600. If PDI-UT-1 is used, Calibration Block PDI-UT-1-O should be used. C05.051.007A 2MS-124-69V 2MS-124 NDE-25 MT CS 24.000 S/G 2A Main Steam Nozzle to Reducer weld. Circumferential 01A O-lSiN4-122A-2.1 0.969 Class B Term end Reducer to Nozzle S/G 2A C05.051.008 2MS-124-72V 2MS-124 NDE-600 UT CS 24.000 See Corn S/G 2A Main Steam Nozzle to Reducer weld. Circumferential 01A O-ISIN4-122A-2.1 See Corn 0.969 Depending upon the examiners qualifications, Class B Term end ReduceIr to PocedurePD!-UT-1 may be used in lieu nf Nozzle S/G 2A Procedure NDE-600. If PDI-UT-1 is used, Calibration Block PDI-UT-1 -0 should be used. C05.051.008A 2MS-124-72V 2MS-124 NDE-25 MT CS 24.000 S/G 2A Main Steam Nozzle to Reducer weld. Circumferential 01A O-ISIN4-122A-2.1 0.969 Class B Term end Reducer to Nozzle S/G 2A C05.051.026 2-14B-48-109 2-14B-48 NDE-600 UT CS 8.000 See Corn Flange at valve 2LPSW-21. Circumferential 14B O-ISIN4-124B-2.2 See Corn 0.500 Depending upon the examiners qualifications, Class B Flange to Procedure PDI-UT-1 may be used in lieu of Pipe Procedure NDE-600. If PDI-UT-1 is used, Calibration Block PDI-UT-1-O should be used. C05.051.026A 2-14B-48-109 2-14B-48 NDE-25 MT CS 8.000 Flange at valve 2LPSW-21. Circumferential 14B O-ISIN4-124B-2.2 0.500 Class B Flange to Pipe C05.051.027 2-14B-48-1 11 2-144B-48 NDE-600 UT CS 6.000 See Corn Depending upon the examiners qualifications, Circumferential 14B O-ISIN4-124B-2.2 See Corn 0.432 Procedure PDI-UT-1 may be used in lieu of Class B Tee to Procedure NDE-600. If PDI-UT-1 is used, Flange Calibration Block PDI-UT-1-O should be used. C05.051.027A 2-14B-48-111 2-14B-48 NDE-25 MT CS 6.000 Circumferential 14B 0-ISIN4-124B-2.2 0.432 Class B Tee to Flange

0- dr~ Afp T EOC 21 - w DUKE ENERGY CORPORATION CATEGORY C-F-2, Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Carbon Or Low Alloy Steel Piping Inservice Inspection Database Management System Plan Report PMPini Welds >= 3/8 in. Nominal Wall Thickness Oconee 2 Page 34 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 for Piping > NPS 4 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C05.051.028 2-14B-48-112 2-144B-48 NDE-600 UT CS 6.000 See Corn Depending upon the examiners qualifications, Circumferential 14B O-ISIN4-124B-2.2 See Corn 0.432 Procedure PDI-UT-1 may be used in lieu of Class B Flange to Procedure NDE-600. If PDl-UT-1 is used, Pipe Calibration Block PDI-UT-1-O should be used. C05.051.028A 2-14B-48-112 2-14B-48 NDE-25 MT CS 6.000 Circumferential 14B O-ISIN4-124B-2.2 0.432 Class B Flange to Pipe C05.051.029 2-14B-48-3 2-14B-48 NDE-600 UT CS 8.000 See Corn Depending upon the examiners qualifications, Circumferential 14B O-ISIN4-124B-2.2 See Coin 0.500 Procedure PDl-UT-1 may be used in lieu of Class B Elbow to Procedure NDE-600. If PDl-UT-1 is used, Elbow Calibration Block PDI-UT-1-O should be used. C05.051.029A 2-14B-4O-3 2-1 4B--O lvii 8.000 Circumferential 14B O-lSiN4-124B-2.2 0.500 Class B Elbow to Elbow C05.051.030 2-14B-48-4 2-14B-48 NDE-600 UT CS 8.000 See corn Depending upon the examiners qualifications, Circumferential 14B O-ISIN4-124B-2.2 See Corn 0.500 Procedure PDI-UT-1 may be used in lieu of Class B Elbow to Procedure NDE-600. If PDI-UT-1 is used, Pipe Calibration Block PDI-UT-1-O should be used. C05.051.030A 2-14B-48-4 2-14B-48 NDE-25 MT CS 8.000 Circumferential 14B O-ISIN4-124B-2.2 0.500 Class B Elbow to Pipe Total C05.051 Items: 14 Total C05 Items: 57

EOC 21 I ACl DUKE ENERGY CORPORATION CATEGORY D-A. Welded Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels. Piping. Pumps. And Valves Inservice Inspection Database Management System Plan Report Oconee 2 Page 35 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS SO/DWG I' NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Welded Attachments ****

D01.020.013 2-03A-1 1439B-H-12 2-03A-06/sht.3 QAL-13 VT-1 NA 6.000 Calculation No. OSC-459. Inspect with F01.031.022. Rigid Restraint 03A O-ISIN4-121 D-2.1 0.216 Class C D01.020.014 2-03A-1 1439B-H31 2-03A-05/sht.4 QAL-1 3 VT-1 NA 6.000 Calculation No. OSC-447. Inspect with F01.032.011. Spring Hgr 03A 0-lSIN4-121 D-2.1 0.500 Class C D01.020.031 2-07A-6-0-1400A-H56 0-2TB-20701 -01 QAL-13 VT-1 NA 12.000 Calculation No. OSC-467. Inspect with F01.032.021. Spring Hgr 07A O-ISIN4-121A-2.8 0.750 Class C D01.020.051 0-13-447A-H7000 4-13-03/sht.1 QAL-13 VT-1 NA 16.000 Calculation No. OSC-1224-25. Inspect with Rigid Restraint 13 O-ISIN4-133A-2.5 1.000 F01.031.051. Class C D01 .020.061 2-14B-0-1436A-H28 2-14-06/sht.3 QAL-13 VT-1 NA 16.000 Calculation No. OSC-475. Inspect with F01.032.51. Spring Hgr 14B O-ISIN4-124B-2.1 0.187 Class C Total D01.020 Items: 5 Total D01 Items: 5

EOC 21 4- _9C DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report chass 1 Piping Supports Oconee 2 Page 36 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Category A, One-Directional ****

F01.010.015 2-51A-0-1479A-H9B 2-51-24 QAL-14 VT-3 NA 2.500 Calculation No. OSC-1 323. Rigid Support 51A O-ISIN4-101A-2.4 0.500 HPI West Coolant Loop. Class A F01.010.016 2-51A-0-1479A-H4A 0-2RB-25315-04 OAL-14 VT-3 NA 2.500 Calculation No. OSC-1324-06. Rigid Support 51A O-ISIN4-101A-2.4 0.375 HPI East Coolant Loop. Class A Total F01.010 Items: 2

 **** Category B, Multi-Directional Fo1 011 032     2-53A-0-1481A-H28C          0-2RB-25314-02           OAL-14        VT-3      NA         1.500       Calculation No. OSC-1324-06.

Rigid Restraint 53A O-ISIN4-100A-2.2 0.250 Class A Total F01.011 Items: 1

 **** Category C, Thermal Movement F01.012.002      2-50-0-1481A-H3            0-2RB-25314-01           OAL-14        VT-3      NA         2.500       Calculation No. OSC-1324-06.

Hyd Snubber 50 O-ISIN4-100A-2.2 0.154 Class A F01.012.032 2-53A-0-1479A-H8B 0-1492C-2(s) QAL-14 VT-3 NA 10.000 Calculation No. OSC-1318. Spring Hgr 53A O-ISIN4-102A-2.3 1.250 Class A Total FU1.012 items: 2

EOC 21 I DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Oconee 2 Page 37 WC~s 2 Piping uports Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Category A, One-Directional ****

F01.020.002 2-01A-0-1401 B-H21 2-01-01/sht.2 QAL-14 VT-3 NA 36.000 Calculation No. OSC-440. Rigid Support 01A O-ISIN4-122A-2.1 0.000 Inspect with item number H04.001.044. Class B F01.020.014 2-03A-1439A-RL-0901 2-03A-08/sht.3 QAL-14 VT-3 NA 6.000 Calculation No. OSC-449. Inspect with Rigid Support 03A O-ISIN4-121D-2.1 0.500 C03.020.013. Class B F01.020.049 2-51A-3-0-1439A-H77 0-2AB-25106-01 QAL-14 VT-3 NA 4.000 Calculation No. OSC-483. Rigid Support 51A O-ISIN4-101A-2.1 0.000 Class B F01.020.054 2-51A-435C-DE008 2-51-18/sht.3 QAL-14 VT-3 NA 4.000 Calculation No. OSC-1 023. Rigid Support 51A O-ISIN4-101A-2.4 0.000 Class B F01.020.071 2-53B-2-0-436E-H1O 0-2AB-25102-02 QAL-14 VT-3 NA 6.000 Calculation No. OSC-481. Inspect with Rigid Support 53B O-ISIN4-101A-2.3 0.216 C03.020.045. Class B F01.020.076 2-53B-0-435B-DE016 0-2AB-25301-03 QAL-14 VT-3 NA 10.000 Calculation No. OSC-487. Rigid Support 53B O-ISIN4-102A-2.2 0.000 Class B F01.020.091 2-54A-435B-DE15 0-2AB-25301 -01 QAL-14 VT-3 NA 10.000 Calculation No. OSC-487. Rigid Support 54A O-ISIN4-102A-2.1 0.125 Class B F01.020.097 2-54A-3-0-1444-H1 2-54-1/sht.1 QAL-14 VT-3 NA 8.000 Calculation No. OSC-494. Inspect with Rigid Support 54A O-ISIN4-103A-2.1 0.500 C03.020.054. Class B

EOC 21 DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report M~!s2 PipingSuports Oconee 2 Page 38 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.020.102 2-56-438C-DE008 4-56-02/sht.5 QAL-14 VT-3 NA 8.000 Calculaton No. OS-421. Rigid Support 56 O-ISIN4-104A-1.1 0.000 Class B Total F01.020 Items: 9

**** Category B, Multi-Directional F01.021.023     2-14B-0-1479A-H11E        0-2RB-21410-04           QAL-14        VT-3      NA         8.000       Calculation No. OSC-1325-09. Inspect with Rigid Restraint        14B O-ISIN4-124B-2.2                                            1.500       C03.020.021.

Class B F01.021.028 2-14B-0-1439A-DE193 4-14-04/sht.3 QAL-14 VT-3 NA 8.000 Calculation No. OSC-474. Rigid Restraint 14B O-ISIN4-124B-2.2 0.000 Class B F01.021.053 2-51 B-0-436J-DE01 9 0-2AB-25108-01 QAL-14 VT-3 NA 2.500 Calculation No. OSC-485. Rigid Restraint 51B O-ISIN4-101A-2.2 0.000 Class B F01.021.063 2-53B-5-0-444-R12 0-2AB-25302-01 QAL-14 VT-3 NA 10.000 Calculation No. OSC-493. Rigid Restraint 53B O-ISIN4-102A-2.2 0.000 Class B F01.021.073 2-54A-3-0-1444-R3 2-54-03/sht.2 QAL-14 VT-3 NA 8.000 Calculation No. OSC-496. Inspect with Rigid Restraint 54A O-ISIN4-103A-2.1 0.500 C03.020.053. Class B Total F01.021 Items: 5

 **** Category C, Thermal Movement F01.022.001     2-01A-0-1441-Hi           2-01-01/sht.1           QAL-14         VT-3     NA        36.000       Calculation No. OSC-440. Inspect with Spring Hgr             01A O-ISIN4-122A-2.1                                             0.500      C03.020.001.

Class B

EOC 21 1-DUKE ENERGY CORPORATION ( CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report WCgas2 PipingSuports Oconee 2 Page 39 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.022.011 2-03-0-1479A-H2A 0-1490B-4(S) OAL-14 VT-3 NA 14.000 Calculation No. OSC-1313-06(Vol.B). Constant Support 03 O-ISIN4-121 B-2.3 0.000 Class B 2-03-05/sht.3 F01.022.043 2-51A-3-0-1444A-H75 0-2AB-25106-01 OAL-14 VT-3 NA 4.000 Calculation No. OSC-483. Spring Hgr 51A O-ISIN4-101A-2.1 0.000 Class B F01.022.062 2-54A-3-0-435B-R101 2-54-1/sht.1 QAL-14 VT-3 NA 8.000 Calculation No. OSC-494. Hyd Snubber 54A O-ISIN4-103A-2.1 0.000 Class B Totai FOi.022 items: 4

EOC 21 I I DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report M~!as3 PipingSupport~s Oconee 2 Page 40 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

 **** Category A, One-Directional ****

F01.030.001 2-O1A-4-0-1400H-DJB1001 2-01-06/sht.2 QAL-14 VT-3 NA 6.000 Calculation No. OSC-445. Rigid Support 01A O-ISIN4-122A-2.4 0.000 Class C F01.030.012 2-03A-1-0-1400A-H108 0-2TB-203A12-01 QAL-14 VT-3 NA 6.000 Calculation No. OSC-1213. Rigid Support 03A O-ISIN4-121D-2.1 0.000 Class C F01.030.018 2-03A-1-0-1400A-H88 0-2TB-203A12-01 QAL-14 VT-3 NA 6.000 Calculation No. OSC-1213. Rigid Support 03A O-ISIN4-121D-2.1 0.000 Class C F01.030.023 2-03A-1401B-DE009 2-03A-05/sht.5 QAL-14 VT-3 NA 6.000 Calculation No. OSC-447. Rigid Support 03A O-ISIN4-121D-2.1 0.000 Class C F01.030.041 2-07A-6-0-1400A-H58 0-2TB-20701 -01 QAL-14 VT-3 NA 12.000 Calculation No. OSC-467. Rigid Support 07A O-ISIN4-121A-2.8 0.000 Class C Total F01.030 Items: 5 Category B, Multi-Directional F01.031.012 2-03A-1-0-1401A-SR3 2-03A-05/sht.5 QAL-14 VT-3 NA 6.000 Calculation No. OSC-447. Rigid Restraint 03A O-ISIN4-121 D-2.1 0.000 5:!ais C F01.031.016 2-03A-1-0-1400A-H73 0-2TB-203A1 -01 QAL-14 VT-3 NA 6.000 Calculation No. OSC-1212. Rigid Restraint 03A 0-ISIN4-121D-2.1 0.000 Class C F01.031.022 2-03A-1-0-1439B-H12 2-03A-06/sht.3 QAL-14 VT-3 NA 6.000 Calculation No. OSC-459. Inspect with Rigid Restraint 03A 0-ISIN4-121D-2.1 0.216 D01.020.013. Class C

EOC 21 I DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report WlIas3 PipingSupports Oconee 2 Page 41 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01 .031.051 0-13-447A-H7000 4-13-03/sht.1 QAL-14 VT-3 NA 16.000 Calculation No. OSC-1224-25. Inspect with Rigid Restraint 13 O-ISIN4-133A-2.5 1.000 D01.020.051. Class C Total F01.031 Items: 4

 **** Category C, Thermal Movement F01.032.011      2-03A-1-0-1439B-H31     2-03A-05/sht.4           QAL-14        VT-3      NA         6.000       Calculation No. OSC-447. Inspect with Spring Hgr            03A O-ISIN4-121D-2.1                                            0.500       D101.020.014.

Class C F01.032.021 2-07A-6-0-1400A-H56 0-2TB-20701 -01 QAL-14 VT-3 NA 12.000 Calculation No. OSC-467. Inspect with Spring Hgr 07A O-ISIN4-121A-2.8 0.750 D01.020.031. Class C F01.032.041 2-13-7-0-1400A-H9 2-07-02/sht.1 QAL-14 VT-3 NA 12.000 Calculation No. OSC-471. Spring Hgr 13 O-ISIN4-133A-2.2 0.000 Class C F01.032.051 2-14B-0-1436A-H28 2-14-06/sht.3 QAL-14 VT-3 NA 16.000 Calculation No. OSC-475. Inspect with Spring Hgr 14B O-ISIN4-124B-2.1 0.187 D01.020.061. Class C Total F01.032 Items: 4

EOC 21 T- I-DUKE ENERGY CORPORATION CATEGORY F-A, Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System ESurports Other Than Piping Supports Oconee 2 Inservice Inspection Plan for Interval 4 Outage 1 Plan Report Page 42 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

**** Class 1, 2, and 3 ****

F01.040.003 2-PZR-SKIRT ISI-OCN2-002 QAL-14 VT-3 CS 0.000 Pressurizer Support Stand. Additional Drawing O-ISIN4-10OA-2.2 0.000 OM-1201-858. Class A OM-1201-456 F01.040.005 2-DHRC-A OM-201-286 QAL-14 VT-3 NA 0.000 Decay Heat Removal Cooler 2A Support. Support is 0-ISIN4-102A-2.2 0.000 located on Class C side of Heat Exchanger. Class C F01.040.006 2-50-RCPM-H6604 OM-201.D-003 QAL-14 VT-3 NA 0.000 Reactor Coolant Pump 2A1 Motor Support. Constant Support O-ISIN4-100A.2.1 0.000 Class A F01.040.012 2-LPI-PU-A OM-1201-1121 QAL-14 VT-3 NA 0.000 Low Pressure Injection Pump 2A Support Pad & O-ISIN4-102A-2.2 0.000 Legs. Class B OM-201-1704 F01.040.024 2-LDFTR-A OM-201-0128 QAL-14 VT-3 NA 0.000 Letdown Filter 2A Support. O-ISIN4-101A-2.1 0.000 The examination in outage 1 does not count in the Class B percentages. Work Order 98674855 was written to perform this exam in outage 1. The exam scheduled for outage 6 will count in percentages to meet Section Xl requirements. F01.040.029 2-RB-CC-A OM-201-3142 QAL-14 VT-3 NA 0.000 Reactor Building Cooling Coils 2A. Additional O-ISIN4-124B-2.2 0.000 drawing OM-235-0514. Class B OM-235-0513 Total F01.040 Items: 6 Items: 42 Total FOl Items: Total F01 42

r EOC 21 DUKE ENERGY CORPORATION CATEGORY ELC, Elective Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Oconee 2 Page 43 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 I ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS H03.001.001 2FDW-225-22B 2FDW-225 NDE-600 UT CS 24.000 This weld used to be listed as 2-03-18-22B and was Circumferential 03 O-ISIN4-121B-2.3 NDE-940 1.219 shown on isometric 2-03-18. Class B Elbow to Procedure NDE-600 should be used for angle beam Valve 2FDW-46 inspection and Procedure NDE-940 should be used for thickness measurements on this weld. Inspection results should be forwarded to Timothy D. Brown of the Oconee Design Basis Group. H03.001.002 2-03-18-22C 2-03-18 (1) NDE-600 UT CS 24.000 Procedure NDE-600 should be used for angle beam Circumferential 03 O-ISIN4-121B-2.3 NDE-940 1.219 inspection and Procedure NDE-940 should be used Class C Pipe to for thickness measurements on this weld. Valve 2FDW-46 Inspection results should be forwarded to Timothy D. Brown of the Oconee Design Basis Group. H03.001.003 2-03-18-23A 2-03-18 (1) NDE-600 UT CS 24.000 Procedure NDE-600 should be used for angle beam Circumferential 03 O-ISIN4-121 B-2.3 NDE-940 1.219 inspection and Procedure NDE-940 should be used Class C Pipe to for thickness measurements on this weld. Elbow Inspection results should be forwarded to Timothy D. Brown of the Oconee Design Basis Group. H03.001.004 2-03-18-23G 2-03-18 (1) NDE-600 UT CS 24.000 Weld 2-03-18-23A is a Pipe to elbow weld located Circumferential 03 O-ISIN4-121B-2.3 NDE-940 1.219 on iso 2-03-18(1). Weld 2-03-18-23G is a Grinnell Class C Elbow to Subassembly (elbow to pipe) weld located on the Pipe opposite end of the elbow from weld 1-03-18-23A. Procedure NDE-600 should be used for angle beam inspection and Procedure NDE-940 should be used for thickness measurements on this weld. Inspection results should be forwarded to Timothy D. Brown of the Oconee Design Basis Group. H03.001.005 2-03-18-24 2-03-18 (1) NDE-600 UT CS 24.000 Procritra NCF-RAn shnioud hp iupsd fnr annie beam Circumferential 03 O-ISIN4-121B-2.3 NDE-940 1.219 inspection and Procedure NDE-940 should be used Class C Pipe to for thickness measurements on this weld. Elbow Inspection results should be forwarded to Timothy D. Brown of the Oconee Design Basis Group. H03.001.006 2-03-18-24G 2-03-18 (1) NDE-600 UT CS 24.000 Weld 2-03-18-24 is a Pipe to elbow weld located on Circumferential 03 O-ISIN4-121B-2.3 NDE-940 1.219 iso 2-03-18(1). Weld 2-03-18-24G is a Grinnell Class C Elbow to Subassembly (elbow to pipe) weld located on the Pipe opposite end of the elbow from weld 1-03-18-24 Procedure NDE-600 should be used for angle beam

EOC 21

                 ,le-4 DUKE ENERGY CORPORATION CATEGORY ELC. Elective Inspections                   INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System                                            Plan Report Oconee 2                                                                  Page 44 Inservice Inspection Plan for Interval 4 Outage 1                                         01/16/2006 I

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS inspection and Procedure NDE-940 should be used for thickness measurements on this weld. Inspection results should be forwarded to Timothy D. Brown of the Oconee Design Basis Group. Total H03.001 Items: 6 Total H03 Items: 6

EOC 21 DUKE ENERGY CORPORATION CATEGORY ELC. Elective Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Oconee 2 Page 45 Inservice Inspection Plan for Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS H04.001.001 2-03-0-1439B-H62 2-03-01/sht.1 QAL-14 VT-3 NA 24.000 Calculation No. OSC-454. Rigid Support 03 O-ISIN4-121 B-2.3 0.375 Inspect with item number H04.001.001A. Class B H04.001.001A 2-03-0-1439B-H62 2-03-01/sht.1 NDE-35 PT NA 24.000 Calculation No. OSC-454. Rigid Support 03 O-ISIN4-121B-2.3 0.375 Inspect along with item number H04.001.001. Class B Perform a Surface exam on the attachment welds. Note: Magnetic Particle examinations (with the use of procedure NDE-25) may be performed on carbon steel material in lieu of or in conjunction with liquid penetrant examinations. H04.001.003 2-03-0-1439B-H53 2-03-011sht.1 QAL-14 %'T-3 NA 24.000 CaIcu!atinn No, OSG-454. Spring Hgr 03 O-ISIN4-121B-2.3 0.000 Class C H04.001.005 2-03-0-551-H51 2-03-01/sht.1 QAL-14 VT-3 NA 24.000 Calculation No. OSC-454. Rigid Support 03 O-ISIN4-121B-2.3 1.500 Inspect with item number H04.001.005A Class C H04.001.005A 2-03-0-551-H51 2-03-01/sht.1 NDE-35 PT NA 24.000 Calculation No. OSC-454. Rigid Support 03 O-ISIN4-121B-2.3 1.500 Inspect along with item number H04.001.005. Class C Perform a Surface exam on the attachment welds. Note: Magnetic Particle examinations (with the use of procedure NDE-25) may be performed on carbon steel material in lieu of or in conjunction with liquid penetrant examinations. H04.001.006 2-03-0-1401A-R8 2-03-01/sht.1 QAL-14 VT-3 NA 24.000 Calculation No. OSC-454. Rigid Support 03 O-ISIN4-121 B-2.3 0.322 Inspect with item number H04.001.006A. Class C H04.001.006A 2-03-0-1401A-R8 2-03-01/sht.1 NDE-35 PT NA 24.000 Calculation No. OSC-454. Rigid Support 03 O-ISIN4-121 B-2.3 0.322 Inspect along with item number H04.001.006. Class C Perform a Surface exam on the attachment welds. Note: Magnetic Particle examinations (with the use of procedure NDE-25) may be performed on carbon steel material in lieu of or in conjunction with liquid

EOC 21 . I !0F DUKE ENERGY CORPORATION CATEGORY ELC. Elective Insw ections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Oconee 2 Page 46 Inservice Inspection Plan for Interval 4 Outage 1 ,01/16/2006 I ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS penetrant examinations. H04.001.007 2-03-0-551-H50 2-03-01/sht.1 QAL-14 VT-3 NA 24.000 Calculation No. OSC-454. Spring Hgr 03 O-ISIN4-121B-2.3 0.500 Inspect with item number H04.001.007A. Class C H04.001.007A 2-03-0-5511-H50 2-03-01/sht.1 NDE-35 PT NA 24.000 Calculation No. OSC-454. Spring Hgr 03 O-ISIN4-121B-2.3 0.500 Inspect along with item number H04.001.007. Class C Perform a Surface exam on the attachment welds. Note: Magnetic Particle examinations (with the use of procedure NDE-25) may be performed on carbon steel material in lieu of or in conjunction with liquid penetrant examinations. H04.001.044 2-01A-0-1401B-H21 2-01-01/sht.2 QAL-14 VT-3 NA 36.000 Calculation No. OSC-440. Rigid Support 01A O-ISIN4-122A-2.1 0.000 Inspect with item number F01.020.002. Class B Total H04.001 Items: 10 Total H04 Items: 10

4.0 Results Of Inspections Performed The results of each examination shown in the final Inservice Inspection Plan (Section 3 of this report) are included in this section. The completion date and status for each examination are shown. All examinations revealing reportable indications and any corrective action required as a result are described in further detail in Subsections 4.1 and 4.2. Corrective measures performed and limited examinations are described in further detail in Subsections 4.3 and 4.4. The information shown below is a field description for the reporting format included in this section of the report: Item Number = ASME Section Xl Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2), Augmented Requirements ID Number = Unique Identification Number Sys = Component System Identification Insp Date = Date of Examination Insp Status = CLR Clear REC Recordable REP Reportable Insp Limited = Indicates inspection was limited. Coverage obtained is listed Geo. Ref. = Y Yes (Geometric Reflector N No applies only to UT) RFR (Relief Request) = Y Yes N No Comments = General and/or Detail Description EOC 21 Refueling Outage Report Page 1 of 2 Oconee Unit 2 Revision 0 Section 4 January 16, 2006

4.1 Reportable Indications EOC 21 (Outage 1) did not have any reportable indications during this report period. 4.2 Corrective Action Corrective action is action taken to resolve flaws and relevant conditions, including supplemental examinations, analytical evaluations, repair / replacement activities, and corrective measures. There were no problems that required corrective action during this report period. 4.3 Corrective Measures Corrective measures are actions (such as maintenance) taken to resolve relevant conditions, but not including supplemental examinations, analytical evaluations, and repair / replacement activities. Any corrective measures performed for examinations associated with this report period will be shown on the examination data sheets which are on file at the Duke Energy Corporate Office in Charlotte, North Carolina. 4.4 Limited Examinations Limited examinations (i.e., less than or equal to 90% of the required examination coverage obtained) identified during EOC 21 (Outage 1) are shown in the table below. A Request for Relief will be submitted to seek NRC acceptance of the limited coverage for the items listed in the table below. Item Number Description of Limitation B03.150.001 Coverage limitation (29.26%) B03.150.002 Coverage limitation (29.26%) C05.01 1.001 Coverage limitation (72.40%) C05.021.026 Coverage limitation (37.50%) C05.021.027 Coverage limitation (37.50%) C05.021.028 Coverage limitation (37.50%) C05.021.073 Coverage limitation (79.15%) EOC 21 Refueling Outage Report Page 2 of 2 Oconee Unit 2 Revision 0 Section 4 January 16, 2006

Ar-t I DUKE ENERGI )RPORATION QUALITY ASSURANCE TECHNICAL SERVICES EOC 21 In-Service Inspection Database Management System Run D Oconee 2 Inservice Inspection Listing Page 1 Plant: Oconee 2 Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS B02.011.001 2-PZR-WP76 50 10/28/2( )05 REC --- N N The recordable indication that was found was acceptable per ASME Section Xl, Paragraph IWB-3510, of the 1998 Edition through the 2000 Addenda. PIP 0-05-06919 was written to document problems found during the review of documentation from a previous exam that was performed in 1996. B02.012.001 2-PZR-WP1-1 50 10/28/2005 CLR N N B03.150.001 2-LDCA-I N-V1 51A 11/01/2005 CLR 29.26% N Y Relief Request will be filed for the limitation. B03.150.002 2-LDCA-OUT-V2 51A 11/01/2005 CLR 29.26% N Y Relief Request will be filed for the limitation. B03.160.001 2-LDCA-IN-V1 51A IIl N N Relief Request 04-ON-01 5 was filed to allow us to exempt the examination for this item during the fourth interval. B03.160.002 2-LDCA-OUT-V2 51A IIl N N Relief Request 04-ON-015 was filed to allow us to exempt the examination for this item during the fourth interval. B06.010.001 2-RPV-26-204-01 50 11/02/2005 CLR N B06.0i0.002 2-RPv-26-204-02 50 I iiU~i=UUD CLR N B06.010.003 2-RPV-26-204-03 50 11/02/2005 CLR N B06.010.004 2-RPV-26-204-04 50 11/02/2005 CLR N B06.010.005 2-RPV-26-204-05 50 11/02/2005 CLR N B06.010.006 2-RPV-26-204-06 50 11/02/2005 CLR N B06.010.007 2-RPV-26-204-07 50 11/02/2005 CLR N B06.010.008 2-RPV-26-204-08 50 11/02/2005 CLR N B06.010.009 2-RPV-26-204-09 50 11/02/2005 CLR N B06.01 0.010 2-RPV-26-204-1 0 50 11/02/2005 CLR N B06.010.011 2-RPV-26-204-11 50 11/02/2005 CLR N B06.010.012 2-RPV-26-204-12 50 11/02/2005 CLR N B06.010.013 2-RPV-26-204-13 50 10/29/2005 CLR N B06.010.014 2-RPV-26-204-14 50 10/29/2005 CLR N B06.010.015 2-RPV-26-204-15 50 10/29/2005 CLR N B06.010.016 2-RPV-26-204-16 50 10/29/2005 CLR N B06.010.017 2-RPV-26-204-17 50 10/29/2005 CLR N B06.010.018 2-RPV-26-204-18 50 10/29/2005 CLR N B06.010.019 2-RPV-26-204-62 50 10/29/2005 CLR N B06.010.020 2-RPV-26-204-20 50 10/29/2005 CLR N B06.030.001 2-RPV-25-204-01 50 11/02/2005 CLR N B06.030.002 2-RPV-25-204-02 50 11/02/2005 CLR N B06.030.003 2-RPV-25-204-03 50 11/02/2005 CLR N B06.030.004 2-RPV-25-204-64 50 11/02/2005 CLR N

V i DUKE ENERG'- )RPORATION QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 21 Page 2 Oconee 2 Inservice Inspection Listing Plant: Oconee 2 Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS B06.030.005 2-RPV-25-204-05 50 11/02/2C)05 CLR --- N N B06.030.006 2-RPV-25-204-06 50 11/02/2( )05 CLR --- N N B06.030.007 2-RPV-25-204-07 50 11/02/2(005 CLR --- N N B06.030.008 2-RPV-25-204-08 50 11/02/2(005 CLR --- N N B06.030.009 2-RPV-25-204-09 50 11/02/2(005 CLR --- N N B06.030.010 2-RPV-25-204-10 50 11/02/2(005 CLR --- N N B06.030.011 2-RPV-25-204-11 50 11/02/2(005 CLR --- N N B06.030.012 2-RPV-25-204-12 50 11/02/2( 005 CLR --- N N B06.030.013 2-RPV-25-204-13 50 10/29/2(005 CLR --- N N B06.030.014 2-RPV-25-204-14 50 10/29/2(005 CLR --- N N B06.030.015 2-RPV-25-204-15 50 10/29/21005 CLR --- N N B06.030.016 2-RPV-25-204-16 50 10/29/21 05 CLR --- N N B06.030.017 2-RPV-25-204-17 50 10/29/21D05 CLR --- N N B06.030.018 2-RPV-25-204-18 50 10/29/21 05 CLR --- N N B06.030.019 2-RPV-25-204-19 50 10/29/21D05 CLR --- N N B06.030.020 2-RPV-25-204-20 50 10/29/21D05 CLR --- N N B06.050.001 2-RPV-WASH-BUSH 50 11/02/21005 CLR --- N N Washers and bushings for stud holes 1 thru 12 were inspected on 11-02-2005 by LP. Washers and bushings for stud holes 13 thru 20 were inspected on 10-29-2005 by JH. B07.020.001 2-PZR-UHB-STUDS 50 10/25/2005 CLR N B07.030.001 2-SGA-UMW-STUDS 50 10/30/2005 CLR N B07.030.002 2-SGA-LMW-STUDS 50 10/30/2005 CLR N B07.050.001 2-PZR-RC4-STUDS 50 10/28/2005 CLR N B07.070.003 2-53A-CF13-STUDS 53A 10/28/2005 CLR N B09.011.001 2-PSL-8 50 10/31/2005 CLR --- N B09.011.001A 2-PSL-8 50 10/30/2005 CLR ... N B09.011.030 2-PIB2-4 50 10/27/2005 CLR --- N RO901 1_00A 2-PIR2-4 50 10/27/2005 CLR --- N 809.011.203 2LP-189-1 53A 11/04/2005 CLR 92.30% N B09.011.203A 2LP-1 89-1 53A 11/03/2005 CLR --- N B09.011.208 2-53A-8-48 53A 11/03/2005 CLR ... N 809.011.208A 2-53A-8-48 53A 11/03/2005 CLR --- N B09.011.209 2-53A-8-50 53A 11/03/2005 CLR --- N B09.011.209A 2-53A-8-50 53A 11/03/2005 CLR N 809.021.004 2-PDA1-11 50 10/26/2005 CLR N B09.021.010 2-PIB1-11 50 10/29/2005 CLR N B09.021.123 2-51A-147-17 51A 10/30/2005 CLR N

V DUKE ENERW' )RPORATION QUALITY ASSURANCE TECHNICAL SERVICES f EOC 21 In-Service Inspection Database Management System Run D Oconee 2 Inservice Inspection Listing Page 3 Plant: Oconee 2 Interval 4 Outage 1 01/1612006 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS B09.021.134 2-51 A-35-43 51A 10/30/2005 CLR N B09.021.135 2-51A-35-55 51A 10/30/2005 CLR N B09.021.136 2-51 A-35-56 51A 10/30/2005 CLR N B09.021.201 2LP-151-1 53A 11/03/2005 CLR N B09.032.004 2-PDB1-12 50 10/27/2005 CLR N B09.032.201 2LP-151-21 53A 11/03/2005 CLR N B09.040.002 2RC-271-13A 50 11/03/2005 CLR N B09.040.007 2-50-7-124 50 10/26/2005 CLR N B10.020.001 2-50-0-1481A-H3 50 10/30/2005 CLR N B10.020.031 2-53A-0-1479A-H8B 53A 11/04/2005 CLR N B13.010.001 2-RPV-INT-SURFACE 50 10/30/2005 CLR N B14.010.003 2-RPV-CRD-63WH9 50 10/31/2005 CLR N B14.010.006 2-RPV-CRD-63W60 50 10/31/2005 CLR N B14.010.009 2-RPV-CRD-63 50 10/31/2005 CLR N B14.010.012 2-RPV-CRD-63W61 50 10/31/2005 CLR N C02.031.001 2-LPCB-INLET 08/23/2005 CLR N C02.031.002 2-LPCB-OUTLET 08/23/2005 CLR --- N C03.010.003 2-RCSR-COOLER-A 11/07/2005 CLR --- N C03.020.001 2-01A-0-1441-Hi 01A 11/05/2005 CLR --- N C03.020.013 2-03A-1439A-RL-0901 03A 08/15/2005 CLR --- N C03.020.021 2-14B-0-1479A-H1-1E 14B 11/09/2005 CLR --- N C03.020.045 2-53B-2-0-436E-H1-0 53B 08/16/2005 CLR --- N C03.020.053 2-54A-3-0-1444-R3 54A 08/18/2005 CLR --- N C03.020.054 2-54A-3-0-1444-Hi 54A 08/17/2005 CLR --- N C05.011.001 2LP-148-16 53A 11/04/2005 CLR 72.40% y Relief Request will be filed for the limitation. C05.011.001A 2LP-148-16 53A 11/03/2005 CLR --- N C05.011.002 2LP-148-17 53A 08/17/2005 CLR ... N G05.011.002A 2LP-148-17 53A 08/17/2nn0s C:lR --- N C05.011.003 2LP-148-18 53A 08/17/2005 CLR --- N C05.011.003A 2LP-1 48-18 53A 08/17/2005 CLR --- N C05.021.001 2-RCP-FTR2A-SH-1 51A 10/29/2005 REC --- N All indication sizes noted are < 12.5 surface flaw a/t % per appendix A, Figure B of NDE 12. Acceptable per IWB-3514.3, Table IWB-3514-2. C05.021 .001A 2-RCP-FTR2A-SH-1 s1A 11/04/2005 CLR N N C05.021.002 2-RCP-FTR2A-SH-2 51A 10/29/2005 CLR N N C05.021.002A 2-RCP-FTR2A-SH-2 s1A 11/04/2005 CLR N N C05.021.006 2-51A-129-9 51A 08/16/2005 CLR N N

DUKE ENERG> )RPORATION QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 21 Page 4 Oconee 2 Inservice Inspection Listing Plant: Oconee 2 Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS C05.021.006A 2-51 A- 129-9 51A 08/15/2005 CLR N C05.021.024 2-51A-17-100A 51 A 08/22/2005 CLR N C05.021.024A 2-51A-17-100A 51A 08/19/2005 CLR N C05.021.025 2-51 A-17-101 51 A 08/22/2005 CLR N C05.021.025A 2-51 A-1 7-101 51A 08/19/2005 CLR N C05.021.026 2-51A-17-111 51A 08/22/2005 CLR 37.50% Y Relief Request will be filed for the limitation. C05.021.026A 2-51A-17-111 51A 08/19/2005 CLR N C05.021.027 2HP-227-3 51A 08/22/2005 CLR 37.50% Y Relief Request will be filed for the limitation. C05.021.027A 2HP-227-3 51A 08/19/2005 CLR N C05.021.028 2HP-227-7 51A 08/22/2005 CLR 37.50% Y Relief Request will be filed for the limitation. C05.021.028A 2HP-227-7 51 A 08/19/2005 CLR N C05.021.073 2-51 A-28-67 51A 08/16/2005 CLR 79.15% Y Relief Request will be filed for the limitation. 005.021.073A 2-51 A-28-67 51A 08/15/2005 CLR N C05.021.074 2-51 A-28-69 51 A 08/16/2005 CLR N C05.021.074A 2-51 A-28-69 51A 08/15/2005 CLR N C05.021.075 2-51 A-33-1 0 51A 11/04/2005 CLR N C05.021.075A 2-51 A-33-1 0 51A 11/03/2005 CLR N C05.021.076 2-51 A-33-13 51A 11/04/2005 CLR N C05.021.076A 2-51 A-33-13 51A 11/03/2005 CLR N C05.021.081 2-51 A-27-3 51A 08/18/2005 CLR N C05.021.081A 2-51 A-27-3 51 A 08/18/2005 CLR N C05.021.087 2-51 A-27-21 51A 08/18/2005 CLR N C05.021.087A 2-51 A-27-21 51A 08/18/2005 CLR N C05.021.093 2-51 A-28-30 51A 11/06/2005 CLR N C05.021.093A 2-51 A-28-30 51A 11/04/2005 CLR N C05.021.099 2HP-212-24 51A 11/04/2005 CLR N C05.021.099A 2HP-212-24 51A 11/04/2005 CLR N G05.030.001 2-61 B-1 8-48 51 B 11/0/20o Ci R N C05.030.007 2LP-98-10 53B 08/23/2005 CLR N C05.030.008 2LP-97-13 53B 08/23/2005 CLR N C05.030.009 2HP-451 -44 51A 08/19/2005 CLR N C05.041.001 2LP-96-13 53B 08/23/2005 CLR N C05.051.007 2MS-124-69V 01A 11/01/2005 CLR N C05.051.007A 2MS-124-69V 01A 11/01/2005 CLR N C05.051.008 2MS-124-72V 01A 11/01/2005 CLR N C05.051.008A 2MS-124-72V 01A 11/01/2005 CLR N

DUKE ENERGV )RPORATION QUALITY ASSURANCE TECHNICAL SERVICES r4 EOC 21 In-Service Inspection Database Management System Run D Oconee 2 Inservice Inspection Listing Page 5 Plant: Oconee 2 Interval 4 Outage 1 01/16/2006 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS C05.051.026 2-144B-48-109 14B 08/16/2005 CLR N N C05.051.026A 2-144B-48-109 14B 08/15/2005 CLR N N C05.051.027 2-14B-48-111 14B 08/16/2005 CLR N N C05.051.027A 2-14B-48-1 11 14B 08/15/2005 CLR N N C05.051.028 2-14B-48-112 14B 08/16/2005 CLR N N C05.051.028A 2-148-48-112 14B 08/15/2005 CLR N N C05.051.029 2-14B-48-3 14B 08/16/2005 CLR N N C05.051.029A 2-1413-48-3 14B 08/15/2005 CLR N N C05.051.030 2-148-48-4 14B 08/16/2005 CLR N N C05.051.030A 2-14B-48-4 14B 08/15/2005 CLR N N D01.020.013 2-03A-1-0-1439B-H12 03A 08/18/2005 CLR N N D01.020.014 2-03A-1 1439B-H31 03A 08/30/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. D01.020.031 2-07A-6-0-1400A-H56 07A 08/22/2005 CLR N N D01.020.051 0-13-447A-H7000 13 09/06/2005 CLR N N D01.020.061 2-14B-0-1436A-H28 14B 08/10/2005 CLR N N F01.010.015 2-51 A-0-1479A-H9B 51A 10/28/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. F01.010.016 2-51 A-0-1479A-H4A 51A 11/01/2005 CLR N N F01 .011.032 2-53A-0-1481 A-H28C 53A 10/28/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. F01.012.002 2-50-0-1481 A-H3 50 11/15/2005 CLR N N F01.012.032 2-53A-0-1479A-H8B 53A 11/01/2005 CLR N N F01.020.002 2-01 A-0-1401 B-H21 01A 10/26/2005 CLR N N F01.020.014 2-03A-1439A-RL-0901 03A 08/16/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. F01.020.049 2-51 A-3-0-1439A-H77 51A 08/18/2005 CLR N N F01.020.054 2-51 A-435C-DE008 51A 08/10/2005 CLR N N F01.020.071 2-53B-2-0-436E-H1 10 53B 08/10/2005 CLR N N F01.020.076 2-53B-0-435B-DE016 53B 08/10/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98358513 was written to correct problems. F01.020.091 2-54A-435B-DE1 5 54A 08/10/2005 REC N N The discrepancies that were found were reviewed by civil

DUKE ENERG)=- !RPORATION QUALITY ASSURANCE TECHNICAL SERVICES I In-Service Inspection Database Management System Run D EOC 21 Page 6 Oconee 2 Inservice Inspection Listing Plant: Oconee 2 01/16/2006 Interval 4 Outage 1 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS engineering and the support was found to be acceptable for service. Work Order # 98358609 was written to correct problems. F01.020.097 2-54A-3-0-1444-Hi 54A 08/16/2005 CLR N N F01.020.102 2-56-438C-DE008 56 08/16/2005 CLR N N F01.021.023 2-14B-0-1479A-H 1 E 14B 11/08/2005 CLR N N F01.021.028 2-144B-0-1 439A-DE1 93 14B 08/18/2005 CLR N N F01.021.053 2-51 B-0-436J-DE019 51B 10/28/2005 CLR N N F01.021.063 2-53B-5-0-444-R12 53B 08/18/2005 CLR N N F01.021.073 2-54A-3-0-1444-R3 54A 08/16/2005 CLR N N F01.022.001 2-01 A-0-1441 -Hi 01A 11/09/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98360872 was written to correct problems. F01.022.011 2-03-0-1479A-H2A 03 11/01/2005 CLR N N F01.022.043 2-51 A-3-0-1444A-H75 51A 08/16/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98358603 was written to correct problems. F01.022.062 2-54A-3-0-435B-R1 01 54A 08/10/2005 CLR N N F01.030.001 2-01 A-4-0-1400H-DJB1 01A 08/22/2005 CLR N N F01.030.012 2-03A-1 1400A-H108 03A 08/22/2005 CLR N N F01.030.018 2-03A-1 1400A-H88 03A 08/22/2005 CLR N N F01.030.023 2-03A-1401 B-DE009 03A 08/22/2005 CLR N N F01.030.041 2-07A-6-0-1400A-H58 07A 08/22/2005 CLR N N F01.031.012 2-03A-1 1401 A-SR3 03A 08/22/2005 CLR N N F01.031.016 2-03A-1 1400A-H73 03A 08/22/2005 CLR N N F01.031.022 2-03A-1 14393B-H-12 03A 08/18/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. F01.031.051 0-1 3-447A-H7000 13 09/06/2005 CLR N N F01.032.011 2-03A-1 1439B-H31 03A 08/30/2005 CLR N N F01.032.021 2-07A-6-0-1400A-H56 07A 08/22/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98358508 was written to correct problems. F01.032.041 2-1 3-7-0-1400A-H9 13 08/22/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. F01.032.051 2-14B-0-1436A-H28 14B 08/10/2005 CLR N N F01.040.003 2-PZR-SKIRT 10/25/2005 CLR N N

DUKE ENERGY'f RPORATION go,- QUALITY ASSURANCE TECHNICAL SERVICES t EOC 21 In-Service Inspection Database Management System Run D Oconee 2 Inservice Inspection Listing Page 7 Plant: Oconee 2 Interval 4 Outage I 01/16/2006 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS F01.040.005 2-DHRC-A 08/09/2005 CLR N N F01.040.006 2-50-RCPM-H6604 11/01/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98360130 was written to correct problems. F01.040.012 2-LPI-PU-A 08/10/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98693574 and 98325040 were written to correct problems. F01.040.024 2-LDFTR-A 11/07/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98360898was written to correct problems. This exam does not count in the outage 1 percentages. F01.040.029 2-RB-CC-A 10/28/2005 CLR N N H03.001.001 2FDW-225-22B 03 11/12/2005 CLR Y N Indication #1 is a geometric reflector due to Backing Ring. H03.001.002 2-03-18-22C 03 11/12/2005 CLR Y N Indications # 1 and 2 are geometric reflectors due to backing ring. H03.001.003 2-03-18-23A 03 11/12/2005 CLR Y N Indications # 1 and 2 are geometric reflectors due to backing ring. H03.001.004 2-03-18-23G 03 11/12/2005 CLR Y N Indications # 1 and 2 are geometric reflectors due to backing ring. H03.001.005 2-03-18-24 03 11/12/2005 CLR Y N Indications # 1 and 2 are geometric reflectors due to backing ring. H03.001.006 2-03-18-24G 03 11/12/2005 CLR Y N Indications # 1 and 2 are geometric reflectors due to backing ring. H04.001.001 2-03-0-1439B-H62 03 11/09/2005 REC N N The discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98360883 was written to correct problems. H04.001.001A 2-03-0-14391B-H62 03 11/11/2005 CLR N N H04.001.003 2-03-0-1439B-H53 03 08/16/2005 CLR N N H04.001.005 2-03-0-551 -H51 03 10/26/2005 CLR N N H04.001.005A 2-03-0-55 1-H51 03 11/07/2005 CLR N N H04.001.006 2-03-0-1401 A-R8 03 11/01/2005 CLR N N H04.001.006A 2-03-0-1401 A-R8 03 11/07/2005 CLR N N H04.001.007 2-03-0-551-H50 03 10/26/2005 CLR N N H04.001.007A 2-03-0-55 1-H50 03 11/07/2005 CLR N N H04.001.044 2-01A-0-1401 B-H21 01A 11/02/2005 CLR N N

I 5.0 Owner's Report for Repair and Replacement Activities As required by the applicable code, records of Class 1 and Class 2 Repair and Replacement work is included on NIS-2 forms in this section. Due to station processing and approval time frames, three categories of repair and replacement documentation exist for: 1) work performed during a prior refueling cycle; 2) work performed during the current refueling cycle; and 3) work completed but documentation not yet reviewed and approved. There were 28 work orders for category 1 repair and replacement documentation for this reporting period. Work Orclers 98540409, 98540880, 98540875, 98540889,98539671,98539673,98532391,98532393,98530942,!98530949, 98516356,98516357,98516899,98516911,98532818,98532820,'98537912, 98537914,98541036,98621223,98648846,98540919,98644159,'98540909, 98540994, 98624546, 98617114, and 98616047 had work completed prior to 6-15-2004 and copies of the NIS-2 forms are included in this report. Twenty-five of the work orders are associated with the Steam Generator Replacements and the NIS-2 forms associated with this work are the first 148 pages that immediately follow this page. Three of the work orders are associated with the Reactor Vessel Head Replacements and the NIS-2 forms associated with this work consist of 17 pages that follow the 148 pages from the steam generator replacement NIS-2 forms. PIP 0-04-05070 and PIP 0-04-04879 were written at the end of the Unit 2 EOC-20 refueling outage to document the late submittal for the NIS-2 forms 1lu ,/ associated with the 28 work orders listed previously in this paragraph. Category 2 had 59 NIS-2 forms for work orders completed during this reporting period. Copies of the NIS-2 forms are included in this section of the report. There were no items for Category 3 during this reporting period. The individual work request documents and manufacturers' data reports are on file at Oconee Nuclear Station. 5.1 Class 1 and 2 Preservice Examinations As required by the applicable code, Preservice Inspection (PSI) Examinations were performed on ISI Class 1 and ISI Class 2 items during this report period. There are two lists for PSI exams that were performed and both lists are located behind the NIS-2 forms in this section. The first list has two pages and is entitled "Steam Generator Preservice Weld Examination". The second list has one page and is entitled "Preservice Examinations of Class 1 & 2 Welds". PSI examination data for items on the two lists previously mentioned are on file in the Oconee Nuclear Station QA Vault. EOC 21 Refueling Outage Report Page 1 of 1 Oconee Unit 2 Revision 0 Section 5 January 16, 2006

A fk FORM NiS-2 OWNER'S REPORT. ,REPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of _33-

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit rF P'2 r-3 r Shared (specify Units j 3a. Work Order # 98540409. 98540880. 98540875. 98540889

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AS6 WP 22570A. 23040A. 22570B, 23040B, 23065A, 23065B

4. Identification of System Reactor Coolant System Class 1

5. (a)Applicable Construction Code ASME III 1989 Edition N/A Addenda, No Addenda 'Code Cases N-20-4. N-4 74-2. 2142-1. 2143-1 (b)Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Replacement Components Column I Column 2 Column.3 Column 4 Column 5 CoI. 6 Column 7 Column 8 National l llASME Code a uOther Ba.rd Year Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer Serlal Number Number Identification BuIlt or Replacement or no)

                                                                                                                                        .rRepalred             r No Babcock & Wilcox Co.                                                                               iv Replaced           R  Yes A            Steam Generator           Barberton, Ohio         620-0004-55 #1           107             SG 2A              1971      r Replacement Babcock & Wilcox of                                                                                F Repaired            F No Canada, Cambridge,                                                                                r  Replaced           Fe Yes B            Steam Generator               Ontario                 006K03               207             SG 2A              2003       P7Replacement r Repaired            r No Babcock & Wilcox Co.                                                                               Po Replaced           Pr Yes C            Steam Generator          Barberton, Ohio          620-0004-55 #2           108             SG 2B              1971      r Replacement Babcock & Wilcox of                                                                                        r                No Canada, Cambridge,                                                                                r Replaced            F Yes D             Sam Gencrator                OntarIo                 006K04               Zu8             SG 2B              2003         Replacement rRepalred             r No rReplaced             r Yes E                                                                                                                                    rReplacement rRepalred             r No r  Replaced            F Yes F                                                                                                    FrReplacement

ml Form NIS-2 (Back) Sheet 2 of 33 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each" sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced Unit 2 A & B Steam Generators

8. Test Conducted: r Hydrostatic r Pneumatic 17 Nominal Operating Pressure r Other r Exempt Pressure psig Test Temp OF Pressure psig Test Temp 'IF Pressure psig Test Temp . F

9. Remark. Removed Unit 2 steam generators 2A (620 0014-55 #1) and 2B (620-0004-55 #2) made by B&WV of Barberton. Ohio and replaced with 2A (006K03) and 2B (006K04) made by B&W Canada of Cambridge. Ontario. Applied Code Case N-416-1.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp NWA Certificate of Authorizationpl. NIA 5 s Expiration Date WA Signed .- 7A:/'- Date os/2ZZ- + CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of C and employed by have inspected the components described Inthis Owner's Report during the period. to .A2v0e ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described Inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions #JC 53. tc, w Ins eoes Signature National Board, State, Providence and Endorsements W, Date _ 42 M

t
to F

I M-. ,

     *                                        \       '                                            ?

-= -. If

  -1             A     Dtj3o                                                         A--

I ~A i ~ J' '-. Nr .. .()/E *-1

I'-

T 1971 tong F JN:T '^'-1C04' l

                                          *~A             .:                                              .
         * , s ,                                .*v     .         ,      2*    ........ _ .

FORM N1 CRICATE HOLDERS' DATA REPORT FOR NUCLEAR VESSELS* As R t red bythe Provisions ofth&eASME Code, Section IAL Dision 1 Pg. I of 6

iz . l.asddh. z:

4~ 2Monuxcud for1wZWra cdiebabmcOkIWilcx MantactSme b snd 4 Canada, 651 ContrionBXeCambMide, Onaido

                                                                                                                                -                               ICIm     NlR5V3 P.D.Bx 1006, Charlotte, North Caroffna. 2W2;,00 3.iLocation of krsato                         I..conee2. Seneca, SoatCaroet                             ,         _

4.Type: Vert HeaXE. 006KO.3 K OCSKE01ev..4&EO2F20.103 R-5.ASME Code. Sedcion Hl, Divion 1: .kbine 1 Lst 41 AIL 4!11~ uslve to be completed orsngle walvessels leckets of lacketeseek otahelsdieatchanoers. 6.Shell SA150BCLSa 90iksl list2AM Ust #2AIL LW t#2 At List#2Alt ListE3 7.Searns UT#3Ati Ust13All. AtL LIst 3At List#3ALl. Ud Lst3t3AlAtL 4 On WIl W1 ti- O' (R' raQ

8. Heads _ _ _ _

galRnaispec. hNu LocationV Thickness lCorrosion lCrown l vi~oue sof M i l misphadcalRadius lFlat lIaconvexsor I(0b - - - - - I I Iirfemovab boltsused: - Otherfastenling - MIr Isu*, S.Jacket Oosure: lfDacttb n3agn &a~d baz Lhtc.E bar. po bun$.04d, m"1. GrSkgdtj,-d la Designprssure2 1150 AtrmaLtemp. 600 bn. pressuretesttemp 70 k-. Pneu.h. r, orcomtined test 1500 IrF) CF) (PSrO ltems 11 and 12 to to completed or tube sectlons 111. Tubesheets: SA-S0 Cf. Se 137K 2243116 welded Wan flfcocv.s4 I(92(.-sL to TL*nsWslT pclM l ltabc-nd4bAt4i I~ Putfa./ - lrkm~l POclUORkL l Rractiioii 12.Tioes S-i-163 UNS N06690 % 0.03 15631 shight O"LaSML .w4 M01 11MwICcb&P*) (.4 MIe takakftotnI to be completed foeror dwrntere ocketed vessels o channels of hat exhangera 1S _ Shelf: - - - -kQI 14. Seams -- - - Sngle Yes fuil 1

                                      &OPV4        A^siol                    PTIO-11                          e(ffn               -- rl -S                     low*                 (HP                                            r

15. Heads - SAS406 aC3e 90ksi - _ -

Ua WErr SWl nQ (p saMgtnj t(01n pa.lSthl Pa We A Location Knudde Radius EllRaio Coxcal Apex Hemispherical Flat Side IDPressure Thicness Crown R~adiuss I Angle Radius Diameter .(aonvsx or concv) (a)Ton, bottom, ends b)Chlanel -otng Channel-bottom

4

T 6r.

_1:1 1:1 I I - _ 59-17132 659-17W32

                                                                                                                                                                                            =
                                                                                                                                                                                                '.7 w

concave I _(c1 Roating I _ I _ 11 removabe, olts used Other fastening (frL spc, no.. sze qirtivt) - (dawr cr aUch shost) Ijuen 2500 6550 \inipressure testte;rrp. 70 Pneu., bwa., or comb. Test pressure 3125 A 1

     *          'UPostv eld heattrealed. 2List othr inernl o external prassure with coincident temperature hen appcable.
     *          *Supplcmentat inlomwtoin toe frm oflists. sktces, ordrevmingsmaybe usedprovided i1)size Isg Xl, (2)inforrnation i items t through 4ontiDatI
                *Sch sheet, (3)each sheet isnurnbered and the rnuber                of sheets Isrecorded on the top of his form.                                                                         A<%

4?'Ile So-F3 3 FORM N.1(back Pg. 2 of 6 ? I.. . I .1 . . .. _ .:1.. Cevitcate mq srwhiNo. talN3 17 LmvwI.e ln~anMj-9n M

                                 ..A   n,.e   m nan.R
       * .---.     -W---. al     US"NKl:WUS*  V. I+/-...                                                                                                    -                         ,-TI        -

_Hrot Reinfoczement _ nlet. _ ou__at _et Quadtvi Dia. or size Tyne attached Matlt Thickness _ Material Locaion _ _ I _ _ I _ __ 18.Support Skit SeeList l5 Lugs SesListil5 Legs _ - Other - Attaed SeeListl5 l \r jduG) am rw,-

19. Remate Prevbus N-2 Forms forthe PmaryHeads (Manufactred byJapai Steel Wok. Mur PlanL National Bcard Numbrr 2 nd4Bd.

CERTIFICATION OF DESIGN Design specilication certified by See List d6 P.E. Stats See List 46 Fleg. No. See List #6 Provnce Design reporrcetirrfedby J.T.Bod P.E.Sa Ont. Reg. No. 04801502 CERTIFICATE OF SHOP COMPLIANCE We cerSfyF that the stalements made in this report are correct and that this nudearvessil conforms t hIe rules for conshtrotion'of i d2 a Sedion liiDision 1. N Cere or Authlzation No. NMT9 Exphrs 2sJane 2004 Date October2Bx,2003 Name Babcock &Wi=oxCanada Signed .' S .i&SHT INCertificate HokoeWi; ___ (authotzed re sesntamve) ULt TIFICATE Ur SHI)P INSPElTIUN 1,tie undersigned, holding a valid commission Issued by the National oard of Eloler and Pressure Vessel Inspectors and the State or Prviknx of Ontarb and employed by TechnIcaStandards nd SfatyAutorit of Ontarm have hspectdthe cwnponent desaibed inthisDats Report on Best of my imewtedge aid beiel, the Certifcate Holder has constructed this component inaccordance with ihe ASME CodKSedidin 1,DWK=on 1.

                                                                                                                                                    .                                     , and sta that to the By signing tbis cartificate, neither ft inspector nor his employer makesxny warranly, expressed or knphd, concerning the component desoibed In1his DEta Report. Rfffthensre. neither the nspectornorhis empbyerthafbe labbe ieany maninerforppenalr'rprep e tydanageorloss;oany                                 ldndarisingfromoronnecledlwihthisInspedcon Date       Oct 28, 03                   Signed                                                  _         _        _        Commissionts CERTIFICATE OF FIELD ASSEMBLY COMPUANCE                                                                   .-

Wecartrf thattiie statements on tWis report are correct and hatitie field assembly constnucton o all paiis of this nuclear vessel confuemso tthe mles ohc1struction of The ASMU Code, Sedion IlDDivision 1. N Certificate ofAuthorization No. _ Expires Bats Name Signed INCeffi&At. H.A 1-0-i-A MM'=Afa0'&1 CERTFICATE OF FIELD ASSEMBLY INSPECTiON

1. the undersigned, holding a valid cornmission issued by th National Board of Boiler and Pressure Vessel Inspectors end the State or Provine of VW epyed by and of he compared the statements in this Data Report wt the desribed cmonient and state that pat retenred to as data hems

__ __ _ __ ___ roti ncluded in he certificate of shop Inspection, havu been hsperct by me on inccr ______hto _ _CdeSctonMlDviio 1 and that to the best of my 1nowledge and belef the Certificate Holder has constructed and asswmbled this corwponent inaccorance with the AnfdE Code, Section ll. i, siion 1. By signing this cerficale, neer the inspector nor his employer makes any wananty, expnrssed or implied, conceming ths component described in this Data Report Furthermore, neither tie inspector nor his employer shal be liable inany rnauner for any personal iNjury or property damage or loss ot any kind arising from or cornected wMhhis Insecto I Data Stoned Commissbnsq DateSinne.......-n "t

                                                                                                                                      &^>         633 Attachment to FORM N-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR VESSELS As Required by the Provisions of the ASME Code, Section 1i Division 1                    PO. 3o06

t. pahcaxod and cartiod by -

Babcock &Wilcox Canada, 581 Coronation Botilevad, Cambridge, Onarb N1 R5V3 - ,4.- 2MMM. rted for Duke Power Company, P.O. Box 1006, North Carolina, 28201-1006 _

                                                                                        "MoAmmalftdaw

3. Lacotion of InsWW=aio Oconee 2, Seneca, South Carolina via" SW auss OOE06I Rev. 4&

4.Type: Vertical Heat Exchanger 0081(03 - 00KE002 Rev. I 207 t/ 2003 Lf ramo VMv MR01wmlo4 ermbr~ LUst #1 N-20-4 N-474-2 2142-1 2143-1 Mst#2 j~~ ~ - ~ __. 5 -_. .,__ __ Min. Length (per Nominal Design Inner section Length l Thickness Thickness Diameter thickness) Overall Shell can below upper T/S 5yan" 5" 137%W 523/4 131 13/16" (thick shell, adjacent to T/S, taper 3t/.' 3' 1371W 79 1/16" ! to thin shell) Thin Shell to Thick to Thin 3Y 3" 137W/ 19Y4 159%8/" 5W/. 5 1377 112Ys* _ 3W 3' 1377/. 27%a Thin Shell 3" 3' 1377h" - 173%/' Shell Can Above Lower T/S 3V8' 3s 13714 106 7/16' 159 3/16' (thin shell taper to thick shell, 5'1/ 51 37'/an 52Y2W adjacent to T/S) . (

                               ^=UwCent t rumM1 GNtIRAT HOLDU " DATA REPORT FOR NUCLEAR ESS
                               ...                                                                                                        7 As Required by the ProMVstons of the ASME Code, Section I, DivisIon 1      -            g.f 1.Mhnufcdutud and caried by                    Babcock & filcox Canada, 581 Coronation Boulevard, Canbridg e.Ontario N1R5 V3       :

( 2Manutaursd fr _ Duke Power Company, P.O. Box 1006, North Carorina, 28201-1006 - 3.Locaon of Instanaon Oconee 2, Seneca, South Carormna _

                                                                                      /e            006KE001 Rev. 4 &

4.TType: vertical Heat Exchanger 006K,3 I " - 006KE002 Rev. 1 - 2D7 ., 200310 _ -WV ) ouka"4M0s4 LHani"on cm, (GRN Ps 104 ONZM.) oJwe' List #3 Seam Longitudinal Joint HI RT eff (°h) Girth Joint HT RT; Type Type Tubesheet N/A N/A NIA N/A (Forging) Double Yes Full Shell Can #1 None Yes Full 100 Double Yes Full Shell Can #2 None Yes Full 100

                                                                        -__                                        Double        Yes       Full Shell Can #3                                    None               Yes         Full          100

_ Double Yes Full Shell Can #4 l None Yes' Full 100 Tubesheet N/A NtA N/A N/A Double Yes Full (Forging) 4--_

f. Hflr n w elwfflf r s ,j._

S .3 AUncnment W MUfiM WI CrAicmATe lQoL5ERs DATA REPORT FOR NUCLEAR VESSELS As Requlred by the P1ovisions of the ASME Code, Section Al,DMslIon 1 Pg. 5o1

1. an anid coadby Babcock &Wilcox Canada, 581 CoronatIon Bouuard. Carmbndae, Ontario NiR SV3 Hel t. "aaeMG1C4IMAwi 14K 2.Manufachradfor Duke Power Company, P.O. Box 1006, North Carolina, 28201-1006 -

                                                                                                   *EumnsaladaCPsfMS0 3.Locaton of Inslafladon              Oconee 2.Seneca, South Carolina OO6KEDO1 Rev. 4 &

4.Towe: Vertical Heat Exchanoer 00610)3 K - 006KE002 Rev. I 207 2003 (tawsI" js0. WtP.& M 4 Ce-ba_ (CM) (migI o4 Eha- Br.m40 Wi-u) List 44

= = = _ _ _ _ _ . _ - _ _ _

Pwpos etoullek MY. go) Type HOwAftwbed Mabw Oh) Rehlorcement Locaton dMu ) DhOer Thiktess jltrlal fq No des Wet 1 38' Irtegrl SA-oa CL 3a 3' WA. UpperCharL Head Prbury Nlesi1U 2 28' 5. Welded SA-OSCL 3a 3%' NIA LowerChna Head prnyrMMMay 2 16B I Integral SA-a CL Sa Ir SA46OCL3a Chan.Heads PnmaryManwayCwer 2 28w - BOlW SA533Typ.BCL 1 SW NIA Chan Heads Ptrwylandhe 1 6' I Inte#al SA.5M Cl 3a 35S WA UpperCran

                                                                        .__.______                                                                                        How Pftwam8hoteC0ar                     1          12%       -                 BMatd      SA.533Typ. 8CL            2W                  WA                   upperaC Hea SeUondaiyIaKhdoles                    S           63        I             Intgral         SA-408CL3a          _                       NA                      Shea HndhrdeCoves                       5           12Y'     -                Bolted      SA-533Typ. BCL 1          2                   WA                        Shel lonpelin Poft                      30             3T       I               inteil        SA-508CLM3a                                WA                       She a      pvecow PonrCwers               30            6Y'     -                  Btd        SA 533Typ. BCL1          1.                  WA                       Swel FeeWnWNozsbfdby                    32             4      -            Wesdedtold         S41l82Gr.F22           OS32'                N/A                     Shot exeal hieader_

AwedalFaterNozzes 6 4' - WeedIBoled SA-182 Gr.F22 OL602 WA Shea ledby e alheader Seylaiway 2 16' _ Integral GASS CL 3a NIA Shea SemndaryManwayCower 2 25Y4 - SBoled SA633Typ.BCL 1 3' WA Sheln SteamNole 2 22265! F WeOded SA40B CL3a SW SA4-08CL 3a Shel lrsinentNozades 7 1v F. WeldW SFAU5E70t8A1 0.4t WA She! ItsltumernNows 12 I F Welded SFASSE70IBAI 0.415' WA She! MFW spednPFugs 8 V: F Welded SA-105 ox SA-105 Shel Do wnTean Sensor 3

NPT _ Welded 5479Type 316L 0565" WA She!

                                               -       -                  _                                                           . _           _I
                             -  ra - no protuding shell penetration F=fuhpenetration weld I =Integrally forged P=partial penetration weld.                                                                                                                              .r It iVAn  nwsv~ac . ev   n an.

                                   .Auacnment        M FORM r1 CERFICATE HOLOERS' DATA REPORT FOR NUCLEAR VESSELS As Required by the Provisions of fe ASME Code, Section Di1,   Division 1                        pg. cd 6 1.Manctued    and cered by                    Babcock &WIlcox Canada, 581 Corona6on Boulevard, Cambddg e,Ontario NlR6V3 I ~ Z.Manuiaured for            Duke Power Company, P.O. Box 1006, NorthfCFamna, 28201-1006 3.Locatbn d staltaon                 Oconee 2, Seneca, South Carolina                                                                                     _

006KEOO1 Rev. 4& 4.Type: Verucal 'Heat Exchanger 006(03 - 006KE002 Rev. I 207 2003 -

                     -p9LOrVW4                     kpmkedMar4           WLaHQUWewt(M            C-                pt!4                t(Wl~j.N0.1          01, W LIst#5 Description                        Skdrt          Lugs         Legs      Attached (ihere &

_yes or no) (qty.) (qty.) howv tower Shroud Lugs No 12 _ shefelded Upper Shroud Lug Yes - _ shealugral OriflceRing Lug Yes _- sheflntgra Lower Prknary Head Base Suport Yes _ _ dcarnel

                                                                                                         ._                   headuifegral

_ .~ __ =. list #6 Name State Rec No. M.C.Keck N.C. 18387 1 J.C.Herrin N.C. 14504 rl-**^-rzro e.~v - ..

I'R - to o33

                                                                                                                                                                           ,<-19 FORM N-2 CERTIFICATE HOLDERS'-DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES' As Required by the Provisions of the ASME Code. Section 1II Not to Exceed One Day's Production Pg. I of        2 Manufactured and certified b                             JL~fiTapzn   Steel Workts, Ltd., luroran Plant/4-C atsui-mac,                                  a,iroranUok.4X.do,oS                 O-B50; Japaz
                                                                                                                 .(name andeSs at NPT CardV41ara  M I Manufactured for                Babcock CWilcox, 581 Coronation Blvd., Cambridge, Ontario, h R 3V3, Canada Ii   ,ine and aarm o apurchasedf I. Location of installarioalonee                          ucleer Power Plant Unit 1, 2 .&3 Oconee, Sonth Carolina Inaa and addreSs)

I. Typte 148361W, 11ev. 2 SA-50, Cl. 3& Hii 90kst 2_001 Wawing Ao.) trnits.tsoa no.1 tsurangith. - i.CNR (Yaear GOAMzt

i. ASME Code, Section I11. Division 1: 1989 U o addenda __

Itodilon)l laddnas dare) duast UCode Cose no.1 i Fabricated in accor4ance with Const Spec. IDiv. 2 only) Revision - Date _ - '. Remarks: k dtrostatic test is not performed in The Ja aa Steel Works, Ltd. Cladding thickness is Min. 0.20" from base metal. Cladding caterials are SPA-5.4, AIS C1. E309L-16 -+ 238L-16 an ShA-5.9 ER09Qt + 08LAT.. L Nom. thiciness (in.) 6-3/8' Min. design thicknes (in.) 16-4" Dia.ID(frt&inj 9-11-75" Length overall (ft & in.) 7-0.87" J. When appilcable, Certificate Holders' Data Reports are attached for each hem of this report National National Part or Appurtenance / Board N., Part ar Appurtenance Board No. Serial Number In Numerical Order Serial Number in Numerical Order 12B) (2) _3)___ _ (29) (5) (30) (31) (81___________________ (32) 8T) _ ___ _ _ _ _ __ _ _ _ _ _ _ ____ _ _ _ _ _ _ _ _ _ _ _ (34) (35) 1 (11) 436) (12) - _ (37) _ (13) _ _ _ _ _ __ ____ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (14)_ (38) (1 5) __ _ (16), (17) (18) ___ _ _ ___ _ _ _ ______ _ _ _ _ _ _ _ _ _ _ _ _ 1411 1 8) __ (1 9) (20) __ _ _ _ _ (45) inQ,1 (21) ___ _ _ __ (22) (231 _ I _ (24) _ - (49) (251 __ _ i50z z Design pressure N/A psi. Temp. N/A F. Hydro. test pressure i PZ /A _ at temp. *F Iwitin *801icaoial emerl information In the form of lists. skctches. or drawings may be used provided 1) site is ag,x 11, 12)Information in items 2 and 3 on this Data Report is

~Wd on each sheet, 13)each sheet Isnumbered                       and the number of sheets is recordea at the top of this lorm.

is) This form (8E0040) may be obteined from the Order Dept.. ASME. 22 Law Drive, Box 2300. Fairfield. NJ 07007.2300.

P.O. No.: C!3313-834. JSW Job No..: FN9-4305 Heat No. JSW PC. No. : 3 EOOOLO

JQA-01-190 E FORM N-Z{Mack- Pg 2 of 2 ( Certificate Holder's Serial Nos. 105 throu;h CERTIRCATiON OF DESIGN Design specifications certified by P.E. State N/A Reg. no. N_A twhen 40%91l~abl Design report' certified by { in ?.E. State N/A Reg. no. H/A

                                                              .1In 8901:0ble CERTIFICATIE OF COMPUANCE We certify that the statements made in this report are correct and that this {these             _                   Part co-nforms to the rules of construction of the ASME Code. Section 11.Division 1.

NPT Certificate of Authorization No. N-2725 Expires June 29, 2004 _ The Japan Steel Works, Ltd . Date Auc. 30, 20013 Name Huroun Plant Signed NHPT Wdfwi hSg nedr" wata _~q .T___ .a CERTIFICATEl OF INSPECTION

1. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ILINOIS and employed by K*S'B.I. & I. Co.

of _EMRWD. CT. have inspected these Items described in this Data Report on rLLt

e l . and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances irnccordance with the ASME Code, Section 111, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the equipment described n this Data Report. Furthermoro, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage

 ;_er     loss of any kind arising from or connected with this inspection.

Da . sL.l 30 Commissions bi lOS, N, 3 A

                                     -        -  .        A ho C      adNudear InSne tared                               IN zee& (!i .Ln dr smenml and A mraor Orcv. and n o.l AO_

Mfla (aC n &frh // win~qe-i ctki/Sr~n /2 6 C*s / -e EIWC

                                                                                                                   ,_'~       APPROVED
                                                                                                                        !NCONMUG         INSPE6TIONI O NU' 6 201                   J1

                                                                                                                                         /        -?              -itl'p35
                                                                                                                                      ,1OA -OI- 178 r-FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES-As Required by the Provisions of the ASME Code, Section III Not to Exceed One Day's Production Pg. 1 of         2

1. Manufactured and certified by kvhXJapan Steel Works, Ltd., Nuroran Pie/4-C acsa-nachircror.H0]dtLdcO52.'85O5 Japan Inama mnc swanet of XPT Camiksaa Halder)

2. Manufactured for Babcock ;lcox, 581 Corouation Blvd., Cambridge, Ontarlo, NiR 5V3, Canada

                                                  /'mams                                ainoagarns GI 9cmhasrll 3 Location of installatio
                    ,,onee                    Nuclear Power Plant UnLt 1, 2 & 3 Oconee, South Carolina blae naridadteS

4. Type N148344N, Rev. 1 SA-508, C1 3a jft. 9Pksi _ 2001 icrwing no.) ImarlI sweznoJ Iansise uang) (CAN) llatr ouit 5: ASMIE Code. Section Ill. Division 1: 1989 No deda 1_ _ _

teodengoaVa leOn) Wantti ICoan ho.)

6. Fabricated in accordance with Const. Spec. (Div. 2 only) RRevision Date _

isa.)

7. Remarks:

Hydrostatic test is not performed in The Japan Steel Works, Ltd.

Cladding thickness is min. O.20"frocs base mretal. Cladding materials are SFA-5.4, AWS CU. E30!3L-16 + E308L-16 and SFA-5.9 ER309L + ER308L.

8. Nom. thickness (in.) 6-3/8" Min. design thickness (in.) 6-14 Dia. lD (ft & in) 9'-11-75 Length overall (ft & in.)

9. When applicable, Certificate Holders' Da:a Reports are attached for each item of this report National National Part or Appurtenance Board No, Pan or Appurtenance Board No.

Serial Number inhNum,ericLr4d Serial Number in Nu-nerical Order (1) 1054 r 32 (26) (2) (27) (3) (28) (4) (29) (5) (30) (31) (6) (321 - (17) (33) _ (34) (35) (36) 137) _ (14) (381 t lM Itu (39) (15) (15) (42) (43) (144)* §A'P C, (20) (45) (21) (46) I(22) (23) 24) (25) (47) (48) _ 49)1

                                                                                          !50) t

10. Design pressure - N/A psi. Temp. N/A IF. Hydro. test pressure A Z e temo. IF et 4

i4,rolementat information in the form of lists. sketches, or drawings may be used Provided (1)size Is 8i4x 1;. (21inlormation in items 2 and 3 on this Data Report is dad on easn sheet, (3) each sheet is numbered and the number of sheots is reccrded at the top of this forn.. W This form tEr0040i may be obtained from the Order Dept.. ASME. 2;! Law Dive. Box 2300. Fairfieid. NJ 07007.2300. 11IIDllI1ID111III1

P.O. No. : C13313634 JSW Job No. : FN9-4304 I11lili1l1la'U 111il1 Heat No. : f0D425-1-1 JSW PC. No. : 3 E00040

F. JQA - l 17& -17 NN FORM N-2 (Back - Pg 2 of .. IJ Cenificate Holder's Serial Nos 1054 through CERTIFICATION OF DESIGN Design specifications certified by / P.E. State N/M Rea. no. N/A iwhent spoEicabie Design report* certified by N/A P.E. State N/A Reg. no. f/A twnen apSpfcabt CERTIFICATE OF COMPLIANCE Wecenrtfy that the statements made in this report are correct and that this (these) Part conforms to the rules of construction of the ASME Code, Section Ill, Division 1. NPT Cenificate of Authorization No. -2725 Expires June 29, 2004 The Japan Steel Works, Itd. Oats July 24, 2W Name Muroran Ple..t Signed Tafra. OCPT CeNlrtcae Haidtarirrcetirwtodttl \ (U&4hftd J. Taira.

                                                                                                                                           ,ePM1ftta "Iv CERTIFICATE OF INSPECTION

1. the undersigned, holding a valid commission issued by the National Bioard of Boiler and Pressure Vessel Inspectors and die State or Province Of ILLINOIS' _and employed by LS.B.I. & I. Co.

of 8RAF0RD. CT. have inspected these items described in this Data Report or .y 0 and state that :o the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances in cordance with the ASME Code, Section Ill. Division 1. Each part listed has been authorized for stamping on the date shown above. By signing this certificate, neither the inspector nor hic employer makes amny warrenty; expressed or implied, conceming the equipment described n this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection, DaSgnd A S Commissions NB10104, N, B, A iAvhrina Nudcievkswecd (Nati. CL (hid. exoruaemntrs) Sn U UM OP.tJr Ondnol

                       /fie7md<0Vie1r .1too,
                        /o hS                    Pcr,/

cuiA6 y/ X4 *e Y/0 9h B*/StVer S D > /@f 9/o 3~ j INCOMING INSF'ECTION SEP 20 2OC1 I APPROVED I f /JJ Z)p95

-. .l.'.:. X'.... 3;

                                              .   ...  -~>>S.\z.z; q
                                                                                                                                                                          /L/       33 FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code, Section Xl
             . owr                 Duke Power Company                                                -       Date             October 29, 2003 PO Box 1006, Charlotte, NC,                                      28201-1006 Sheet         1            of     1 Oconee 2 2.1 Plant z..     ".

Unit 006K03 Name Seneca, South Carolina 207A Ad**"U RepakfuWacameat ognizuuaon P.. N4. Jcb Nn. or-

3. Work Performed by Babcock- & Wilcox Canada Type Code Symbol Stamp N Authorizaton No. N-2784 581 Coronation Blvd.. CaMb2idge. Ont N1 5V3 SUU66 uaw.1312In U-..Pab cxp -ua j WGUM .. .

4. Identfication of System 707 S. (a) Applicable Construction Coda ASME Sec III 1989 \ n No /A Addnd,_ Code Case (b)Applicabl Editon ofSecdon XI lizedforRepalrReplacormntAntivity 1998 - 2000 Addenda yenr (c)Applicable Section Xl Coda Caes -s

6. Idmnffatlon at Components

                                                                   .                    I                                    .ASME
                                                                                                            -Non                                           or d,                Coda Name of                Nane of                 Manufacturar           Board                                        Year        Ramoved, or           Stmrnped c=inpomit              Manufctebr                    Serial No.            NILo.                  Idoticatian a9.-                      uilt        Inrsuted            Yoes or me) exanger                 B&W Canada                  006K03               207                   N/A                   2003         See Bel.ow                Yes 7                                                      _                  I_                    _                                     ii=-

7. DescrpoonofWork One prim. inlet nozzle, two Drim. oi'tlAt nnT7,wr -t1Aq e1-Ar4A ? -94cal-machined. MWHT not performed. Two steam outlet nozzles final machined.

LTeuts Conducted Hydrostatic a Pneumatic 0 Nominal Operating Pressure. 0 Exempt 0 Other 0 Pressure psl Test Temp. If NOT Supplemental sheets In form of list, sketches, or drawings may he used, provided (1)size is 8%. In. x 11 In., (2)infornmtion In Items I through 6 on this report Is included on each sheet, and 131each sheet Is numbered and number of sheets is recorded at the top of this form. (/311 This form (E00G30) may be obtuined from the Order Dept; ASME ;o Law Drive, Box 2330, Fair'ild, NJ 07007-2300. E00030

15- !e4?3 FORM NIIS-2 (Back) S. Remarks Applicable Manuftcwar's Dats Ra m to bs inched CEITlCATH' OF COMPUIANCE I certify that the statemnits made in the report are correct and thnt this conforms to the requirements of the ASME Code, Section XL Type Coda Symbol Stamp N . Cardficate da, ? o 7R 9 Expgcn Date. Jan. 23/04 Signed A .Oatr 9S 2)cA_ ______

                      &wner   ov0wnaisamnemITrit        BZ       CLql.t r_

CERTIFCATE OF IUSERVICF INSPEcMON i, the undersigned,holding a vaind commission Issued bythe Naticral Board of Soilerand Pressure Vessel Insoectors and the State orProvince of sendemployedby a4L Ne,41- AN ARP'AD BF2^-r AtJ7vtt'/Y of _ _ _ _ _ _ _ _ _ _ _ _ _ _ have Inspecd the components described In this Owner's Report during the period r 17t 2-76. tt. o 2 -,and ta t to the best of my knowledge and belief, the Owner has performed eamilitatons and taken corrctive rneasures described In this Owners Report in accordance with the requirementa of the ASME Code, Section XL By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report Furthermore, neither the Inspeor nor his employer shall be Hlible In any manner for any personal Injury or property damage or a bes-of anty Idnd arising fromn or connected with thIs Inspection. e Commissions 3 Al SNs.)v xlA 62. Inspdctrs Signature Flatonal 8eard, State. Province, ald iEidasaments Oats A7e 2 9,6 ?

I i Y.:

                                     -1 006 KNC 13 c7c/c/
   %-/" 53<676R                             Q( r IATEM??S A
                                                          ,,e %elo o

PrvG-FS,KY S're9#/ Cp,',q&-,rSp 1

                                                 .2/I / I Ti~Wc  Gt1£ <E waxy Q.A Q* -

I-, 3 Problem Investigation Process Oconee Nuclear Station R da~b lo lE - - bi 10-04-03906 Problem Identification Discovered Time/Date: 12:24 06/07/2004 Occurred Time/Date: Unit(s) Affected: Unit Mode %Power Unit Status Remarks 2 3 0 2EOC20 SGR Replacement Outage System(s) Affected: RC Reactor Coolant Affected Equipment (No Equipment Affected) Location of Problem: Bldg: R Column Line: Elev: Location Remarks: OTSG 2A Nameplate Method Used to Discover Problem: Nameplate Unit No. discrepancy discovered during preparation of the NIS-2 form for the 2A Replacement Once-Through-Steam-Generator (r -TSG). rsief Problem

Description:

Incorrect Oconee Nuclear Station Unit Number designation provided on the ASME code nameplate for the 2A OTSG (Nameplate has been incorrectly labeled "Unit 3"). Detail Problem

Description:

The Oconee Nuclear Station Unit number designation provided on the ASME code nameplate by Babcock & Wilcox Canada (BWC) for the 2A Replacement-Once-Through-Steam-Generator (ROTSG) is incorrect. Unit "3" was incorrectly printed on the plate in lieu of Unit "2". BWC has confirmed with its ANI that the Unit number designation is supplemental information only and is not required by the: ASME code. The ASME required code stamped data (NI, NB 207 and Serial Number 006K-D3) is correct and is in agreement with the Form N-I Certificate Holders' Data Report. The location of installation is also identified correctly on the Form N-i Data Report as Oconee 2, Seneca, SC. SGRH's discussion with Oconee's Resident ANII also confirmed the acceptability of BWC's assessment. Given that the Unit number designation is not required by the ASME code, both BWC and Oconee's ANII concurred with SGRH's proposal to use a vibrating etching tool to engrave the correct Unit number designation on the ROTSG 2A nameplate. Thismerrective action was completed - -- satisfactorily on 6/08/04. Both BWC and Oconee's ANII were informed following completion of the corrective action. A digital photo of the corrected nameplate was also taken and forwarded to BWC and to the Oconee ANTI. ROTSG 2B has been correctly identified with Unit 2 on its ASME code nameplate. BWC has confirmed that the ASME code :tamped nameplates for the Unit 3 Replacement OTSGs 3A and 3B have been correctly printed with Unit 3. Note: This PIP has been issued for documentation purposes and is recomme~nded for Category IV screening. No additional corrective actions are required. Originated By: MAH7380: HUTCHESON, MARK A Team: BKM7360 Group: SGR Date: 06/08/2004 O' - Units/Components/Systems/Areas Affected(Y.N.U): N ... justry Plants Affected(Y.NU): U Immediate Corrective Actions: 0610812004 13.25 Page I PIP No: 0-04-03906

Problem Investigation Process Oconee NucclearStation 8 n that the Unit number designation is not required by the ASME code, both BWC and Oconee's ANII concurred with S(GRH's proposal to use a vibrating etching tool to engrave the correct Unit number designation on the ROTSG 2A nameplate. This corrective action was completed satisfactorily on 6/08/04. Both BWC and Oconee's ANII were informed Following completion of the corrective action. A digital photo of the corrected nameplate was also taken and forwarded to BWC and to the Oconee's ANII. No additional corrective actions are considered necessary. Originated By: MAH7380: HUTCHESON, MARK A Team: BKM7360 Group: SGR Date: 06/08/2004 Imnmediate Corrective Action Documents I Work Orders: Indiv Team Grout Date Problem Identified By: MAH7380 BKM7360 SCR 06/08/2004 Problem Entered By: MAH7380 BKM7360 SGR 06/08/2004 End of the Document for PIP No: 0-4-3906 The status of this PIP is: UnScreened The duration of this PIP was: I day

                                                                                                                                                -V Page 2                                                PIP No: 0-04-03906 06/OS2004 13:25 06/08/2004   13.25                                                      Page 2                                                PIPNo: 0-04-03906

A-10 I

r

!L-

i P*. @

           . _            t l ,    ss ,,,        .,__ ..............                      _ ^-

t' § _/ a , '. . (-1:- -<' , ; - - - ;tBOA.. . t Ro :

            .;4CLASS
               .                         _               =        .

A

                                                                                                                                                                                                                                                 .I J

Z I

                                                                                                                                                                                                                                               ;7
                                     ""- ,'-.D.KE-                                                                                                                      PO                 Et,'ts                          .                 I.
                                                                                                                                                                                                                                               - .1
                                                                                                                                                                                                                                               ;-:I
                                                                                                                                                                                                                                               - .1 ol _
                                                          .-. :-0-: .DUEPRIARY                                                                                                                  SID           :         E - -D E^-0 1:

Al

3DESIGN PRESSURE : .2500PI 1050 PSIA ps[.................. I i

4"DESIGN TEMPERATURE - 350cE : 60.0-F.-; .i 41-711-YDROSTATIC T EST PRESSURE .3125 PSI 13.15- PS.I. .i

                 ;;L V111N. PRESSURiZATION TEMP. :100°F"' .: 100°F ,                                                                                                                                                                         -      i
                 ,^--s;-DATE BUILT 1971                                                                                                                                                                                              gt
                       \        .,                         ,      \     < 6       ,          6   wW_           sJW i
                                                                                                                          .                ,    . i
                                                                                                                                               ^* # ;;_       ....  . 1..
                                                                                                                                                                             -. Z.. .. ....-. , . .. _-- .:.. - - -            .0 fi
                                                                                                                                                                                                                                          ,.      r

_ , , v _ . _ _ _ 4, .-. , s.

                                                               '        . D-        -

e e . .. ;-e w . -.

        *            .               ;-               ,                 -                *                *6                 Sv
                                                                                                       ,:        ".v                         .            .

4 . .

o

o * ' . . .. ..

Zl FORM N-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR VESSELS* As Required by the Provisilons of the ASME Code, Section Ul, vision 1 - Pg.1of6 W 1.Uanulactured and ceutmed by abcock &Wiox Canada. 551 CoaIon Boulevard. Cambridne. Ontario NIR 5V3

                                                                                                                        . jU4X&Xa-&r*MotNC&AW~iaAHoUJ 2A1anufactured for                        Duke PovCklloan. P.O. Box 1008,                Chariotte.Ncrth Caroina,282D1.006 3.Location of lnstalation                         conee2. Seneca, South Carolina 4.Type:                  Vet                         Heat EX                                                           -        006KE01 Rev. 4 t E002                 v1I        v     J20j                       2003 5.ASME Code, Secdon 111,          Divion t:                                                                     eNna                    _              1                                            Lst       41 At Items 6-10Indusve b be completed forasingl                        essels,,adwts o cdvesselrsflscf                          heat ge 6.Shea                  SA-50 CL 3a                                9O ksI                              Lst#2 AIL                        Ust 2 At.                              List 2 Alt                     List 2 Al.

ItrSra Ei) O4U4 aJI tmrl1hwmen (ZIa lUl 1i 4J fnt 0C4I X IL#i i7 List #3 7.Seams: Ust 3AL UIstI3 Alt. Al. List3AtL Ust #3Att. Ust 3 AL Ust 3 At 4 (rRT) K) t) f} -- C-W. 8.Heads: KIjnSec-W4 t4wUiQUI)o P rmrIYfSpK MJ(UMn Location top Thicn Coroson Crow"n Knuckle bottom, ends ess I wance Radius Radius 1

                                                                                               -- 1 --

Ifremovable bobls used: ther fastening I) .ase* .Iqumsy (4eeztr~Walh&UtWc 9.Jacket Closure: iu~cmugawwnr rcu argwwm i~wce. @IMWt 10.Design pressureW 1150 Atmaxtenp." 60 Mkr. pressure test WeMT 70 Pneu., G or conmined test 1500 ('f CF) (Psi) Iters it andl2mtbpiedfore sctmpiU oLns ( 11. Tubeshets SA-S0 a. 3a t3754 22-3168 welded lsawna.se.uri. l*LiLolitileDtuw~lm 111)(1-011 luadana4Kbok~l fi~as&( "l (aacud-011

12. Tubes S&B.BUNSINIM66S V 0.038 15631 _straight Wo.

14W Clowlv The~spg ~ (04 k (ga0100L1 Items l3tDl6 Incusive to be conplteed for innercharrdberso Jatjackted veselsorca isorheate xchangems l J. mile;

14. Seams ________- - - Simgle Yes __FUR is.

Heads -- SA*508 CLa Se90ksl-lI') In *-IpGC Pmae siteaim W-Hfl3;-10a4 ovasierbngno KCX~Lspac-c liank stranA tol r ,

                                                                                                                                                                                          - Rat-               Sid to Pressure Imemnispriercai Location                                                                 Knuckde RadIus          Elliptical Ratio     Conical Apex                                            Diat                                     I4 Diameter          (convex or concave)
              -() op bttom. Ws Thi'kesIConRdu
                                        ;                                                                           WT]TZAnZle                                 RadZu                                                                 I concave concave       *1 (c)Floating
                                        -                                                                                                                                                                                            .J Itremovable, bots used                                                                                                                                    Other fastering                              (aua~ceejca Iftl (voilnSWec  fin size.QWA*))
     "19Zss   -r4"                  2500                   a:               650             W. pressure-test lemp.                   70           Pneu,     lMm.,     or comb. Test pressure                            3125 F1F)                                                      F                                                                                  (p
  *       : Upost weld heat teated. 2 LisI    U other t       rnal or eesemna   pressure wh coincident temrpe.atue rhen ppimable.
  *       *Suppiernental kilSmtion Inthe torm otlists, sketches. or drawings fay be usd prcvdecld (1)size ise X 11,(2)inlormation initems 1 hrough 4cn this Dta Report isincuded CS each shee'. (3)each smeet       is nurmneed and the number of sheets Isrecorded on the Ioo of Uris               form.                                                                                                     ',

FORM INM-(back P2g.; of 6 e Cerfflate Holder's Serial No. 006KO4

17. i'oles, Insoection and styvahe ks s.

Purpose Hw How-Rein l R forceI rent rnleouue .drain. etc.) Ouanthy Dib. or size J Type arached Marl. _____ess I at-rit Location See Lstf4 _ _ _ _ _ _ _._ _ _ =__ - _ _ _ _ _ _ _ _ I. I _ _ _ _ _ _ _ l8.Support:Skkt SeeLIst#S Lugs SeeList#5 Logs - Other _ Atabded SeeList S (rorool (s y) h.rkl P fwl

19. Remarksr PreousN-2 FoTnms frthe Priay Heads IManufacturedbvJaan SealW s.Muroan Plant National Bwd Numbers 435 and 438 )atbded CERTIFICATION OF DESIGN Desbgn specfialmn certified by See ListiS P.E. Stle See List #6 Reg. No. See LIst #6 Province Design reprr certdfled by J. T.Boyd P.E. Sa Ord. Re,. No. 04801502 CERTIFICATE OF SHOP COMPLLANCE We certify a the statements made In his report ae correet and that this nudear vessel conlormsto the rules honsM on pode, SectonUI 0 ision 1.

N Certilicate oi Authorization No. N-2789 Expres _ /wK . .Ianuary 23 2004 Date Novernber7, 203 Name Babcock & Wilcox Canada Sqned 4 vc ,resuf- l (NCertificate Holder) lauthoized reosentatve) CERTIFICATE OF SHOP INSPECTION OlRthe undersigned, holding a valid commisslon issued by the National Board ol Boiler and Pressure Vessel Inspedcrs and the State or Province of Ontario and emplyed by Technical Standardsand Saletv _Au of Ontarb hav hspected the cmponent desbed hisOata Rexo on 9Y3, andstatelhatttIhe Best of my b ed nedge belief, the Cerfata Holder has constructed UuisacomponentIn accordance wi the ASME Code, Se Uion W, Dion 1. By signing M aerlificale, neterthe Inspector nor his oyer a warranty reased or irrpled, concerning the ceaonent described Inthis Data Report Fuhrtermore, nter the inspector norhis employer shall be lablia inany nmnnerlor nat hruryor rtydamnage or bss at any ldnd orconmected with this i ospedn. Date Nov.7,2003 Signed Cornrssions / e o lf .j CERTIFICATE OF FIELD ASSEMBLY COMPUANCE We cey Wathe statements on this report ar coectand taWWhe field assbly Cnsucion of all parts of this nuldear vessel conforms tothe rules of constwfson ofthO ASUE Code. Section 1. Dhivsison 1. NCerdiruate ofAuthortaflon No. _ Expires Cate Name _ Sgned INCetFicate Holder) lauthorized representaetive) CERTIFICATE OF FIELD ASSEMBLY INSPECTION I1,the undersgned, holding a valid commission Issued by ta National Board of Bodler anrd Pressure Vessel inspectors and the State or Province of I __ and ewbpyd by '- of have compared Ihe statements inthis Data Report with the described component and state bhat parts refered boas data items ____ __ __ __ _ _ _ _ _______- ,notindrain the cerfcateof shopo Ispefcin, havebee ispetedtbyineon and that to the best of my lmowkldge and belief the Certificate Holder has constructed and assertkiud this component Inacoraance with the ASME Code, Secmon IM,OMsion I. By signing Miscerlificate, netier the inspector ror his employer makes any warranty, expressed orri pled, concerning the component descrbed Inthis Data Rept.Furthermnore, neither the Inspector nor his emloyer shall be biable Inany rmanner br any personal nIuryor property damusge or loss of any Kdnd arising from or connected with this kiqecti3L. Date Signed Commissions

                                                                                       !^,,-em ,s,                                                                19_.._e.^

_.^__ .. _.. . __ _ N .SX _ !

Date Signed Commissions U,,^e_.

                                                                                                                                      'Z3 Crf    3 3-Attachment to FORM N-I CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR VESSELS As Required by the Provisions of the ASME Code, Section III, Division I                     Pg. 3016 1.manuftemd VWa     ceflvad by          Babcock &Wilcox Canada, 681 Coronation Boulevard, Cambridge, Ontario NI R5V3 1~' 2.,Manufaot~rd for           Duke Power Comoanv. P.O. Box 1006. North Carorina. 28201-1006 3.Lomban of tstaflatn             Oconee 2 Seneca, South Carolina
                                                                                         ~Immuawsoug 0O6KE001 Rev. 4&

4.Type: Vertical Heat Exchanger 00604 - 006KE002 Rev. I 208 2003

                      *#'z.'wve             pd4"I-W              f:t"Wolwaw                          PM     If~f~iflBn.NO4 Ust #1 N-204 N-474-2 2142-1 2143-1 LIst #2 Min.                            Length Cjer Nominal              Design             Inner             section        Length Thickness           Thickness          Diameter          thickness)       Overall Shell can below upper T/S                            51/5                  ,             1377/.              523/4'      131 13/16" (thick shell, adjacent to T/S, taper                 3y/.                 3"             137Wha            79 1/16" to thin shell)                                                                                                           ______

Thin Shell to Thick to Thin 31' 3D 137Y"a 19Y40 159I% 5Y/; 5' 137W/a 112W' 3%' 3" 1377W' 27'_ Thin Shell 31/% 3' 137; - 173%. Shell Can Above Lower T/S 3V" 3' 137W/" 106 7/16" 159 3/16" (thin shell taper to thick shell, 5'1A 5' 137" 52KW adjacent to T/S) =_

                                                                                                                                 ... . Z 0733 AtUChment to FORM NI1 CERTiFICAT1' HOLDERS DATA REPORT FOR NUCLEAR VESSELS As Required by the Proviions of the ASME Code, SetOn i1.Dhslonrl                       Pg. 4of 6 bv1 1. Manufac=Wred and cered by                        Babcock &Wilcox Canada. 581 Coronation BoulevatdCatnbfdaeOntait
                                                                                                                 . ;       N1R5V3 2'Mznuwafted    for              Duke Power Comoany, P.O. Box 1006, North Carolina, 28201-1006                                . .. w _  .

e S cS.1hCri rafrefaOc 3.Locafon of kstalaron . Oconee 2. Seneca, Southi Carolhna 41 006K001 Rev. 4 & 4.Type: Vertical Heat Exchanger 006104 - 006KE002 Rev. i 208 2003

                     , talmhL0-                      0A*Wxk6T                 jC*LKc~f4S            P%             ptafb" Iew"04                                  o-bd List #3 Seam                          Longitudinal Joint             HT          RT        eff (%I) Glrth Joint            -T         RT Type                                                       Type Tubesheet                                         NIA                            NNA          NWA (Forging)                         .                                                                         Double          Yes       Full Shell Can #1                                     None                 Yes        Full         100           Double          Yes       Full Shell Can #2                                     None                 Ye3        Full         100 Double          Yes       Full Shell Can #3                                     None                 Yes        Full         100 Shell Can #4                                     None                 Yes,       Full         100           Double          Yes       Full Tubesheet                                         N/A                 NJA        N/A          N/A           Double          Yes       Full (Forging)
  %V
                            .. te.    ...   ,  ,. ^ ^ ... ...

RY_ 25- 33 Anachment to FORM N-1 CERTIRCATE HOLOERS' DATA REPORT FOR NUCLEAR VESSELS As Required by the ProvIsionS; of the ASME Code, Section Iii, Division 1 Pg. 5of 6 1.Manufadmued andceffid t Babcock &Wilcox Canada, 581 Coronation Boulevar, Cambridge, Ontario Ni RSV3 ti- upfmt~tdc Iat

                                                                                                          !xai'seit, 2blanudactred for                Duke Power Company, P.O. Box 1006, North Carolina, 28201-1006

3. Locatfon ofinstaktdon Oconee 2. Seneca. South Carolina 006KEOOI Rev. 4&

4. Type: Vertical .Heat Exchanger 006K04 - 008KED02 Rev. 1 208 2003 Pomit ovwz2 %1*jKM&W. bis ) (Cat#k~I4~rWW41m 1=P4 aW-4) 0XI31mi 6-6 List #4 Purpose n aeteufet. O. - D) Type HowAttctd matlertal (mh1) Reinforce ant Location drain, etc.) CIDer Thiclcess Matehl .

Pinra Nozzles Wef 1 36' I k&WW SA- C1. 3a 3' W/A UpperChan Head Pdrcy Nods lOutIit 2 26 F Welded SA-SOeCL3a 3Y' WA Lower Che Head Prbnary lnway 2 16' I ktal SAM5 8CL 3a , SA40B CL 3a Chen. Heads Pwryna yManway Cor 2 28W - God _ SA533Typ.BCL1 5W NWA CU Heads PrinfaqHardhhe 1 6. I kntel SA-5W CL3 3Y4 NWA UpperChan. __ __ _____ emd PfnmaryHedh* Cover 1 12W - owd SAS33 Typ.E CL I 2W WA Upper Chai Hesd Sacedy Haroles 5 6' I Inteal SA-508CL3a . NIA She! Handhle Covers 5 12Y' - Bow-d SA.533Typ.B CL 1 2W NWA She! kispeclion Pods 30 3 l intwal SA-5M CL3a 3 N/A Shell Inspedicn Pod Cors 30 6Y4S - Bolted SA-433 Typ. B CL 1 1.48' NWA Shel FewaterNzzles d by 32 4' - Welded/Idled SA-162 Gr. F224 0 N/A Shed external header AuxlaAyFeedwaterNozles 6 4' - Welded(Botted SA-t82 Or. F22 0. N/A Shell fed by eaemal header secendaryMarnQy 2 16' I gu SA-50MCL3a NA W She! Serdawldar ayCover 2 25W _ Bolled SA-33 Typ. B CL 1 3S WA Shal Steam Nozzle 2 22265' F Welded SA-M CL 3a 3W3S SA-508 CL 3a SheI InshrnentNozzias 7 1W F Welded SA 5.5 E7018 A1 0.41' N/A Shel InstrumantNozzes 12 1 F Welded SFA65E701SA1 OA5 NtA SheD MFW Inspecti Plugs F Welded SA-105 O0 SA-105 Shel DowncornerTenp Sensor 3 W NPT P Woe SA479 Type 316L 0a56s N/A Shel __ _ _ __ _ _ _ _ _fillng

                         *n/a - no protruding sheR penetration F = full penetration weld I = integrally forged
                                                                                                                                                                              .- r P=partial penetration weld.

O.,n1 .. rn. Z-. -

Tg 2~t 4w33 Attachment to FORM ti1 CERTIRCATE HOLDERS' DATA REPORT FOR NUCLEAR VESSELS As Required by the Provis ons othe ASME Code, Sectlon III, Divisio&I Pg. 6 ate 1.Manufctured and caulmed by Babcock &Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontario N1 R5V3 2X3nufched for Duke Power Company, P.O. Box 1006, North Carolina, 28201-100 3.Location of inslaton Oconee 2, Seneca, South Carolina 006KEO1I Rev. 4 & 4.Typ: Vertical Heat Exchnaer 006K,04 - 006KE002 Rev. 1 208 2003

                         "              "W      U            (cOhoUtiwfb IMGmfroIaldN bwbuW List 15 I=_                   _                                -        =                   .

Description Skirt Lugs Legs Attached (where & __yes or no) (qty.) (qty.) how) Lower Shroud Lugs No 12 - shelftsded Upper Shroud Lug Yes - - sheWilingrd

                     -Odice Ring Lug                                      Yes               _             -             shel/irtWgal Lower Primary Head Base Support                      Yes               _             -               channel headfinteral WMst16 Name                  State          Reo  No.

lM. C.Keck N.C. 13S67 J.C.Herrin N.C. 14504 4---- IV VP

                                                                                                                                                                                          'iv FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES As Required by the Provisions of the ASME Code, Section III Not to Exceed One Day's Production Pg.1 of             2
  . .Anufacture~and erified by             The Japan Steel Works, Ltd., Nmroran Plant/4-Ciatsu-:cniXlo:r~H rcO5-60                                                                  j8t nams .ndadmsess      oft !i4T C.tcaie 4Ofl

2. Manufactured for Babcocc S Wilcox, 581 Corona.tion Blvd., Canbridge, Onaato, XIR SV3, Cazea (a~amsand adtlen of04=411

3. Location of installetion OCone, Nuclear Power Plant Unit 1, 2 & 3 Oconee, South Carolina hInsng and addressI

4. Type N48361W, Rev. 2 SA-508, Cl. 3a _ in. 9Oks'1 - 200 (crowing no.) tInorL soec no.) I lmie suggt.1h1 ICRNI lf t

5. ASME Code, Section III, Division 1: 1989 No addenda 1

                                                          -lsaidan)                  laddend     aut)                              tas)                           tCoCeCade    no.l

6. Fabricated in accordance with Const. Spec. (Div. 2 only) _ Revision _ Date

7. Remarks:

fydrostatic test Ls not performed. in The Japan Steel Works, Ltd.

Cladding thickless in man. 0.20" from base metal. Cladding materials are SPA-5.4, AHS Cl. E309L-16 + E308L-16 and SFA-5.9 E2309L 4 ER308L. S. Norn. thickness (in.) 6-3/8iL Min. design thickness (in.) 6-1/4" 5b. ID (ft & in. 9'-. 1,75" Leng-h overall ft & in.) 7'-{0 P7"

9. When applicable, Certificate Holders' Data Reports are atitched for each item of this report:

Natiooal National Part or Apourtenance Board No. Part ar Apourtenlance Board No. Serial Number In Numerical Order Serial Number in Numerical Order 1057 436 (26)_ - (2) (27) (3) (28) _ (4). (5) (3tt) (6) (311 (7) (32) - -- (33) (9) (34) (35) 9: (11i) (361 Nn{^t nr§:§ (121 _ _ (371 138) 2 _______2W (39) (15) (40) (10) (41) ' - t____ (42) AP_2 'E0 (23) (43) (14) 1447 (45)_ (21) (22) (471 (23)'_ (481 (24) (25) (50) . __ _ _ _ _ _ _ _ _ _ _ _ _ _ I - _ _ _ __ _ _ _ ._ _

10. Design pressure UA psi. Temp. N/P 'F. Hydro. test pressurc - n/A - at temp. 'F twt.4n apoplc)Ole

Supplemental Informetion in the form of lists. sketches, or drawings may be used provided (1) size is8'Y2t t. (21 Information in Items t and 3 on this OatsReport is included on eech mseet. (3)each sheet is numbered end the numrer of sheats is recorded It the top of this form.

(71181 This tfarrt (E0040) may be obtained from the Order Dept- ASM£. 22 Law Orive, Box 2300. arifield. NJ 07007-2300. jj11jIIill111

              ' P.O. No.             C0313634 0:                         JSW Job No..    :   FN9-430S                                                                             E00040 Heat No.        :    000497-1-1                 JSW PC. No.     :   4

7e /2-vJ- 33 FORM N-2 (Back - Pg 2 of 2: 2 - Certificate Holder's Seritel Nos. 1057 throug - CERTIFICATION OF DESIGN Design specifications certified by K"A P.E. State S/A Reg. no. N/A Design repor;- certified by t /A P.KE State NA Rag no /A CERTIFICATE OF COMPLUANCE We certify that the statements made in this report are correct and that this Ittese) Part conforms to the rules of construction of the ASME Code. Section ill. Division 1. NPT Cenificate of Authorization No. N-2725 Expires t9, 2004 2ute The Japan Steel Works, Ltd. Date Nov. 2. 2001 Name Muroran Plant Signed Cartficaut HCai-VN/T J.nzed rM"s, Taira tativet CERTIFICATE OF INSPECTION 1.the undersigned, holding a valid commission issued by the National Board of Boiter and Pressure Vessel Inspectors and the State or Province of ILLIOIS and employed by H.S.8.I. s Co. 3 of JABTFOEID. C:. _. have inspected these items described in this Dats Report on .1 L , : L. and *tae that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances in accordance with the ASME Code, Section lI, Division 1. Each part listed has been authorized for stampilng on the date shown above. By signing this certificate, neither the inspector nor his employer makes anywarrenty, expressed or implied, concerning the equipment described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any perso -al injury or property damaop or loss of any kind arising from or connected with this inspection. Date Signe~ Commissions NB10104, N, B, A W .., (Auerwrizea NtUWr insiecwrl gNarL ad. fncL andcmenuaJ ad sate orsgtov. and no.) A' 4vefc 6r YC7 i4 ek-Mah^ut idurf'n, '0/b2 /01'

                  -Te/-         %/f /o                   /orj                 Lv4snor                          j INCOMING iNSPECTION LU;41 Y-/7r,              ellaAc          Pae, w JAN I I 2012 A//°/a                36 XeA     (,J, O.C. I l

_APPROVED_ WW-r

z,7 FORM N-2 CERTIFICATE HOLDERS, DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES-As Required by the Provisions of the ASME Code, Section III Not to Exceed One Day's Production Pg. 1 of :

1. Manufactured and co-iified

he ,Wpeci Steel Works, Ltd., Muroran Plant/4 atst,&tSU-z;ct:, , , i -- Z ;_

inameaf anadoorau ii NP, :an.,g-ec'

2. Mainufacturtc ',or sacock & Wi+/-:cox,, 551 Co-rocation Kvd- , Camtbridge, Ontaxi-o, NI 513, a e _

WMam ano acdrau o c@1 p%11i341

-. Lcca:ior, of installa.:on       Oconee NIfcloax ?over Pla.:nJt                 1, 2 & 3 Ocotee, Sout~h Carolina                                      _                                  .

snamre mo ¢acca

4. Tye __ SA'309, Cl. 3a Y+/-4=. 9_k_ _ 20I ac.t Wirtria; (IO3L SOcK *4j.i tt asih StranthU iyear btUi

5. ASME Code, Section lil. Division 1: !989 No addenda _

laditionl lrcdno ataal class! 7Coc. Casea1o.1

6. Fabricated in accordance with Const S-ec. (Div. 2 only) Revisiont - _ _ Date

7. Remarks: *Hydrostatic test is not performed In The Japat Steel kforks, Ltd.

Claddzig thic)caess is mtn. 0.20" i.rom base metal. Claddlng mater2als ane SFA-5.4, AMIS Cl. E-O0L-16 4 E308L-16 and SFA-5.9 E309L + EF308L.

8. Nom. thickness lin.) 6-3/8" Min. design thickness lin.) 6-1/4" Dia. ID (ft & in.) 9'-1 ,75 Length overall (ft & in.) V -2*55 S. When applicable, Certificate Holders' Data Reports are attdched for each item of this report National National Part or Appurtenance Board No. Pan or Atipurtenance Board No.

Serinal Number in Numerical Order Serial Number in Numericei Order 1056 435

13) (28) 1 _ _ _ _ _ _ _ _ _ _ _

(4) (29) _ _ _ _ _ _ _ _ _ _ (51- (30) (7) (32) - (98) (91 2141 l1DI

      '.251 120)

Il _ _ _ _ _ _ _ _ _ _ (37) 138) (401 143) (44) (45) 0r4ULIyfIhfC Hi i

                                                                                                                                                      ~ECTION I

121) (46) APQQ.QVn (2z) (4 7 ) _ _ _ _ _ _ _ _ _ _ .' _ _ _ _ _ _ _ _ _ _

    . 231                                                                                      148i                                           I 1241                                               -       _                              ,49l                                                       _    _    _    _     __     _       _    _   _   _
      !251                                                                                     (SO0...____________

10. Design pressure N/A psi. Terrp. - V/A *F. Hydr:. test pressure -_ N/ at ierK:. 'F Jwnqft 4*r.asolae:

' Supolemenetsl information in tne form a' lists. sketches. or orawings may oc used provided (1) size is 8! a 11. :21 inlarrnetion in items 2 and 3 on tnis Data Auoon fs induced on erin sheet. 131aech shea is numbered and the number of slhors is 'ecorod a- the top of this form. 71981 This form triOO01 may be obtained from the Oroer Oer1L. ASME. 2- Low Orive, Box 2300. Faifield. NJ C7CC --3CC.

                ^  P.O. No. : n313634                              JSR Job No.         F149-4304                                                                                    E00040 Hiaat No. : OD426-1-1                           JSW PC. No. e   4

FORM N-2 (Back - Pg 2 of . L1 ( Cert'ficate Molder's Serial Ncs. 056 :hrmugh -- CERTIFICATION OF DESIGN Design specifications cerified iy P.' S State i/ Fe. nc. Ii/A Desigr. report* certified by N/A - F.E. State - -A Re;. no. N.";, Iwftn imiaotaO) CERTIFICATE OF COMPLIANCE We cenify that the statements made in tnis repors are correct and that this (thesci --- confcrmc to the rules of construcdion of the ASME Coct, Section Ill. Division 1. NPT Cetificate of Authorization No. Expires Juc2 29, 2Q04 The Japan Steel Works, Ltd. Date Set. 1 2C21 Name HurDran Plant Signed (NFT Cerca5rte 140152?) CERTIFICATE OF INSPECTION 1.the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Provin cf ILLINOIS and employed by H.S.B.I. & I. Co. of_ HARTrO. CT. have inspected these items described in this Data Report on ° and state that to best of my knowledge and belief, the Certificate Holder htis fabricated these parts or appurtenances in iccorda.-ace witb the ASME Code, Se-o Ill Division 1. Each part listed has been authorized for stamping on the date shown above. By signing this certificate, neither the inspector nor his emeltoyer makes any warrany. expressed or implied. corcerning the equipment describ; in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or propefty d or loss of any kind arising from or connected with this inspection. Date et L.neta S ignLe F Commissions N21O104, N, B, A t gearIrwnspc NAuUotimd IN:11. ad. Un~c). u,,dowaaeni) and satae or brev. ant nZ.

3 J4- viAe4 ,I f

                                                                                                          'I
                                                                                                                 %  -.      SJ       I       Mr S'

II

                                                                                                                     !,     %e .,r-,     'K    -

IIQ.C. 1

                             /10     hesden           io At.,                                                  i       APP'ROVED
                                  . -       -     I o-i~~r vhhAlc41A
                                               .A

K F3*' o9.33 FORM NIS-2 OWNER'S REPORT FOR REPA1RIREPLACEMENT ACTNTY As Required by the Proviions of the ASME Code, Section Xi

                                                                                                   . ovember 7, 2003

1. Owner Duke Power Comnanv Data tName PO Box 1006. n~sp-lnt~t!c7O-1Oo K, 2qniin _ Sheet I of -

Ageus Oconee 2 Unit 006ZO4

2. Plant NamI Seneca, South Carolina 208 A*UM -r n P.C.NM..tt No.

                                                                                                                                =rauamaC        M-.

3. Work Ferfdormedby Babcock & Wilcox Canada _ Type Code Syrnbl Stamp N-_

Authorizatn No. N-7RCa 581 Coronation Blvd.. CaMbridrae. 0t1t. NlR5V3 Expiration Cate On .

4. Idenarfication of System 208 5 (a) Applicable Construction Code ASM Sec III 1989 *Editon, Addenda, - Code Case Ib)ApplcableEditonofSecdonlUtfldiedfor RepalrtReplacement Aivty 1998 - 2000 Addenda Yew Ic) Applicable Section Xl Code Casm -

6. Identification of Components:

Name of Component M of Nme Manufacturer Manufacturur Serial No. NadoNI Board No. - jI I ec Other Idifdficalt Year Cogrced, u RemoeVt Instailed r dASM Stamped (Yu or No) Heat Exchanger B&W Canada 006K04 208 N/A 2003 See Below Yes ___I _1, _ _ One prim. inlet nozzle, two prim. outlet nozzles weld cladded. and final machine

7. Description of Work PWHT not performed. Two steam outlet nozzles final machined. -

L.Tests Conducted: Hydrostatic a Pneumadc a Nominal Operating Pressure 0 Exempt O Other C Pressure psi Test Temp. *F NOTE Suppler.ental sheots in form of lIsts. sketches, or drawings may be used, provided (1) size Is 8'/z In. x 11 in, (23Information In items 1 through 6 on this report Is Included on each sheet, and (3) oach sheet Is numbered and number of sheets Is recorded at the top of this form. 171/51 Thdform ( may be obtalned from the Order Dept, ASME. 22 Law ODve. Box 23C0. E00030 Fairfield, NJ 070072300. IM I N ORI11 EOG030

7' '< 32- X3 3 FORM I1IS-2 (Back) I%%16 bIl N A0p!lcaa ManufacsunWS Data Ietns; to beasmcfed CEOIMFICATS OF COMPUANCE I certify that the statements made In the report ere correct end that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbo( Stasp N CertifcNf-A2789Expiration Dat Jan. 23/04 Signed 7Q, { Sou r (2A 1tIJ6A 'D~e Owner/ei1 nee, 17d Titl J\AA *? , 2-& CERTIIICATE OF INSERVICE INSPECTION i, t undenrlgned, holding avalid commisslon issued bythe atlonal Roedof ioflewnnd PressureVsssel Ins ectora ndthl State r Priince rAu 7zip and employed by /MYA14A 4 ST A_,, _ A,4____ __ _A_ _ _ __Y____ of a AR .We_ _ havl n, ar."d the components described In this Owner's Report during the period £'Xt *- , 2. d and stats that to the besa of my knowledge mn4 baIef, the Owner has perfcrmed examilnations and taken correctve mneasures d-scribed ln this wner's Report In accordance wkth the requiremenra of the ASME Code, Sectton X?. By signing this certificate neither the Inapector nor his employer maltes any warranty, expressed or implied. concerning the exminations and corrective measures described in this Ownef s Repor; Furthermore, nelther the Inspector nor We employer shall be liablo In any manner for any personal Injury or property damage or a loss of any ind arising fom or connected with this Inspection.

           -V     lpaor'sSignauru commisselos    M6                     41/f'AB75     AWS Natonal scant State, Provinr, and 6n2&inents 652 Dates M014            7'    2    ol
                                                                                                                                                   .W

LQO j 770cC Uc 7- C C AZ AV nil (2°3 #11 K_.

f - q p S MrM .T -l M - ~ p -K- -

IC

                    - (*

pI . - Fle Whdow Hei

IC r p =6 p -

c r

 - - C   -A

        -C                                             FORM NIS-2 OWNER'S REPORI (. REPAIRS OR REPLACEMENTS                                                             I4 As Required By The Provisions Of The ASME Code Section Xi 1.Owner Duke Power Company                                                                                                           1.a Date    09/21/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet    I     of   2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 P 2 r3 r Shared (specify Units 3a. Work Order # 98539671

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1008 Type Code Symbol Stamp NIA Authorization No. WA Expiration Date N/A 3b. NSM or MM # ON-23086 AS1 WP23050A

4. Identification of System Reactor Coolant Class 1

5. (a) Applicable Construction Code ASME iIi NC 1989 Edition WA Addenda, No Addenda _ Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2 l Column 3 Column.4 Column 5 Col. 6 Column 7 Column 8 7 ~~~Natlonal AM Cd Manufacturer Boatrdonhar Y r 'Repampred , Rep(ayee, Stam pas Name of Component Name of Manufacturer Serial Number Number Identification Built or Replacement or no) 1v Repaired 7 No Hanger/Support F Replaced 1 Yes A 2-50-RCPM-H6604 Duke Power Company WA WA WA 1974 r Replacement rp Repaired rv No Hanger/Support F Replaced r Yes B 2-50-RCPM-H6605 Duke Power Company N/A NA WA 1974 r Replacement rRepalred r No r Replaced FYes C r Replacement rFRepalred r No r Replaced FYes

                                                                               .                                                     r   Repaired            F No
                                                                                                                                     .F Replaced             F Yes E                                                                             _                                     .__         r Replacement r Repaired            r No F Replaced             F Yes F      _                _         _                                                                                                Replacement Page 1 of 2

a Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and tlhe number of sheets is recorded at the top of this form.

7. Description of Work Removefreplace supports for removal of Interferences for SG 2A removal.

8. Test Conducted: r Hydrostatic r Pneumatic Ir Nominal Operating Pressure r Other 1v Exempt Pressure __ psig Test Temp . .OF Pressure _ _ psig Test Temp 'F Pressure _ _ psig Test Temp OF

9. Remark: Hangers were removed for the removal cf the 2A SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Certificate of Authorization p. N/A Expiration Date N/A Signed *O Date ZZ-/o4 CERTIFICATE OF INS ERVICE INSPECTION I, the undersigned, holding a valid commision Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of toC_ and employed by B-CZ have inspected the components described in this Owner's Report during the period 2-74 d to 5I) and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a lo ;s of any kind arising from or connected with this Inspection. Commissions Ate 953, JA) X Inspector's Signature National Board, State, Providence and Endorsements Date q-CR -&y Page 2 of 2

c c It p-- II S= E 3 a

C C FORM NIS-2 OWNER'S REPORI ,PR REPAIRS OR REPLACEMENTS I4 As Required By The Provisions Of The ASME Code Section Xi

1. Owner Duke Power Company l.a Date 09122104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F17 Pr2 r3 r Shared (specify Units I 3a. Work Order # 98539673

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1005 Type Code Symbol Stamp N/A Authorization No. NWA Expiration Date N/A 3b. NSM or MM # ON-23086 ASI WP23050B

4. Identification of System Reactor Coolant Class 1

5. (a) Applicable Construction Code ASME III NC 1989 Edition WA -- Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2 Column 3 Colum olumn l Col.6 Column 7 Column 8 7 ~~~~~Nationa SECd Manufacturer nar"l Repa, Rep-hntherIr acea,Stampe Cyes Name of Component Name of Manufacturer Serfal Number Number IdentIfIcatlon Built or Replacement or no) 17 Repaired r No Hanger/Support r Replaced r Yes A 2-50-RCPM-H16606 Duke Power Company N/A N/A N/A 1974 r Replacement E Repaired 17 No Hanger/Support r Replaced - Yes B 2-50-RCPM-H6607 Duke Power Company WA NIA N/A 1974 r Replacement F Repaired r No

                                                                                                                                      .r Replaced           r Yes c                                              .r                                                                                    Replacement r Repaired           r No F Replaced           F Yes D                                                                                                                                  Fr r Repaired           r No r Replaced           r Yes E                                                                                                                                 r Replacement r Repalred           r No rReplaced            r   Yes F                                                                                                                                 FPReplacement Page 1of 2

I Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/ in. x I11 in. (2) Information in items 1 through 6 on this report is Included on each sheet, and (3) each sheet is numbered and the iiumber of sheets is recorded at the top of this form. Z

7. Description of Work -Remove/replace supports for removal of Interferences for SG 2B removal.

8. Test Conducted: r- Hydrostatic rF Pneumatic r Nominal Operating Pressure rF Other P7 Exempt Pressure _____ psig Test Temnp . F

                                                                                                      .O___

Pressure ______ psig Test Temp ____ 'IF Pressure ______ psig Test Temnp .O

9. Remarlt -Hanciers were removed for the removal of the 28 SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer,13 Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section XI. Type Code Symbol Stamp WA Certificate of Authorization No N/A ~ ,Expiration Date N/A Signed ~ A L / ' ' ~Date ( CERTIFICATE OF INSER'/ICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pr surVse Inspectors and the State or Providence of ____and employed by ~~ 4 L ________________have inspected the components described in this Owner's Report during the period 0aZ-_-Y to~ŽL;andstate that to the best of my knowledge and belief, the Owner has performed examinations and tkn corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his errployer makes any warranty, expressed or implied, concerning the examinations-and corrective measures described inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss oy! any kind arising from or connected with this Inspection. I lnipeftoes Signature .......... National Board, state, -Providence and Endorsements Date Page 2 of 2

r 4 pllil . ~ - '-"mM aLA p . ITTO

                      .3. TWA uia

     -r                                                 FORM NIS-2 OWNER'S REPOP'7- 9 REPAIRS OR REPLACEMENTS As Required By The Provis 1 Jf The ASME Code Section Xi
                                                                                                                                                                     .. i

1. Owner Duke Power Company 1.a Date 09/22J04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 Pr 2 r3 r Shared (specify Units 3a. Work Order # 98532391

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM4 WP 23065A

4. Identification of System Reactor Coolant Class I

5. (a) Applicable Construction Code ASME III NB 1989 Edition N/A Addenda, No Addenda _Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components _ _

Column 1I Column 2 I Column 3 1Coiumn 4 Column 5 Cal. 6 Column 7 IColumn 8 [ I National 1 - Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer SerIal Number Number IdentifIcation Built or Replacement nor 0 17 ~Repaired N rv WPNo r Replaced r Yes A Piping Duke Power Company N/A N/A N/A 1974 r Replacement rRepalred r No FrReplaced Ye B _ _ _ _ _ __r Replacement __Ye r Repalred r No r Replaced r Yes C rReplacement r Repalred r No r Replaced r Yes D .__ rReplacement r Repaired r No FrReplaced FYes E . - r Replacement r Repaired F No r Replaced r Yes F . _ r Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Re-install reactor coolant piping for SG 2A.

8. Test Conducted: r Hydrostatic r Pneumatic 177Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp OF Pressure _ psig Test Temp _ _ OF Pressure _ psig Test Temp OF

9. Remark: Existing reactor coolant piping had to be removed to allow removal of old SG and Installation of the new 2A steam generator. This NIS-2 covers the welding for re-lnstalling this piping. Applied Code Case IN416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the tules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. "AA 6G-r-" 5eE^&ktr: Expiration Date N/A ., Signed Hi_________________ Date q . II CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision iqsyed by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of N coo and employed by Mz or have inspected the components described in this Owner's Report during the period ,j-/30! to Siw-olJ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ___nmmiqinnq Nia 3. A). _ , Ins eto'esignature National Board, State, Providence and Endorsements Date q_,9q_ og Page 2 of 2 i I

Jr rt-I f p__

FORM NIS-2 OWNER'S REPO9 ) R REPAIRS OR REPLACEMENTS r As Required By The Provi , is Of The ASME Code Section XI r

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 4

2. Plant Oconee Nuclear Station (Taylor Forge Elbow 2A)

Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 Pr2 r3 r Shared (specify Units 3a. Work Order # 98532391

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. NIA Expiration Date N/A 3b. NSM or MM # ON-23086 AM4 WP 23065A

4. Identification of System Reactor Coolant System Class 1

5. (a)Applicable Construction Code ASME III 1989 Edition N/A Addenda, No Addenda - Code Cases N-474-2 (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column I Column 2 1 Column 3 - Column 4 Column 5 Col. 6 Column 7 Column 8

                                                                                                                             --ia            AME            C    Code uiaer         lv-               year Repaired, Replaced, Stamped (yes Name of Component      Name of Manufacturer         Serial Number         Number          Identification      BuIlt or Replacement            or no) r- Repaired          r- No T                            Taylor Forge                                                                             r1 Replaced          F   o Taylor Forge Elbow     EngIneered Systems,                                                     NA             2004        Replacement      .

I Form NIS-2 (Back) Sheet 2 of 4 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size (Taylor Forge Elbow 2A) is 8 1/2 in. x 11 in. (2) Information in items 1 through 13on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced Unit 2 'A" RCS Hot Leg 1n5 Degree Elbow

8. Test Conducted: r Hydrostatic r Pneumatic 17 Norminal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp___ OF Pressure _ psig Test Temp _ _ OF Pressure _ _ psig Test Temp _ OF

9. Remarks: Applied Code Case N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the ru.es of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization Ng. N/A Expiration Date N/A Signed iE* S4 E t~A.L ~0-d~ Date5' Dat q/zz/o4 w - CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the National Board of Boiler and P sure Vessel Inspectors and the State or Providence of t and employed by

Fir, have inspected the components described in this Owner's Report during the periodaITi3 9 toiyf I ITy; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report inaccordance with the requirements of the ASME Coce, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. JA1, Cmmissions IS. D~3 i,A)7.-.z-InspeDatcsigpature National Board, State, Providence and Endorsements Date !2 !7Al2 °o

I JAK/03-22-04/o 1 Page312of 1 OZ-FORM NPP-1 CERTIFICATE HOLDERS' DATA REPORT FOR FABRICATED NUCLEAR PIPING SUBASSEMBLIES* As Required by the Provisions of the ASME Code, Section Iii, Division I Pg. I of 2 11111...

1. Fabricated and certified by TAYLOR FORGE ENGINEERED SYSTEMS, INC., 208 N. IRON STREET, PAOILA KANSAS 66071

2. Fabricated for SGT OCONEE P.O. 817 SENECA, S.C. 29679

                                                                                                  . (nanr aid address)

3. Location of Installation DUKE POWER COMPANY SGT OCONEE NUCLEAR STATION 155 E PICKENS HIGHWAY SENECA. S.C. 29672 (nane amdaddress oPurchaser)

4. Type: 806050- ID 806050-1 Di R/4 _____________2004 (Cerl. Holders ai no.) (CRN) (dMWMn no.) (Nail. ld~no.) (yewbuill)

5. ASME Code, Section III, Division 1: - 1989 1 N-474-2 lediion) (addenda da) (class) (Code Cs na)

6. Shop hydrostatic test 3200 Psi at 70 OF (if performed)

7. Description of piping RCS HOT LEG 145 DEGREE ELBOW

8. Certificate Holders' Data Reports property identified and assigned by commissioned inspectors have been furnished for the following items of this report

9. Remarks: OCONEE STEAM GENERATOR REPLACEMENT PROJECT CERTIFICATE: OF SHOP COMPLIANCE We certify that the statements made in this report are correct and that the fabrication of the described piping subassembly conforms to the rules for construction of the ASME Code, Section III, Division 1. ag NPTCertificate ofAuthorizationNo. N-1937 expires November25 , 2004.

Date .z Name TaylorForaeEnaineeredSvs ters.nc. Signed __I_.."_____________________ (NPT Cerhiicale Holder) autthoqltzedrfesent.) CERTIFICATE OF SHOP INSPECTAN " 1' I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Kansas and employed by HSB CT of Hartford, CT _ _ , have inspected the piping subassembly described in this Data Report on s /or/d o C ,and state that to the best of my knoveledge and befief, the Certificate Holder has fabricated this piping subassembly In accordance With the ASME Code, Section III, Division 1. By signing this certificate neither the inspector nofis employer makes an aanty, expressed or implied, concerning the piping subassembly described in Oils Data Report Furthermore, neithe r or his employeshe be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with ,in *on Date t53/0

                   /
                        /l I

Signed (.- Dh .,.AI4 Commissions ____ 14

                                                                                                                                          §MA GA fl-'

A? _ ____ AM-1

Supplemental information informn of lists, sketches, or drawings may stusetd provided (1)size is 8 %/x 11, (2)information in items I through 4 on this Data Report Is included on each sheet, (3)each sheet isnumbered and the number of sheets isrecorded at the top of this form.

N t 0,. 3 CV 6 r CI ktrOg -tc 7- A)

IIIIIN I FORM NPP-1 (Back -- Pg. 2 of 2 ) Certificate Holders Serial No. 806050 -ID

10. Description of field fabrication

11. Pneu., hydro., or comb. test pressure _ psi at temp. __ ¶ (if performed)

I tP~lDTICIIATC nF

                                                     ,Wr6% 1 IrW,%   IL.W CIm nCA 12f1tATtnUl tIfMPI IAUhIU rHCL.W I PW A &^ IvM-IWWFV 161PUVW Ir We certify that the statements on this report are correct and that the field fabrication of the described piping subassembly conforms with the rules for construction of the ASME Code, Section III, Division 1.

NPT Certificate of Authorization No. Exoires _-wTr Date Name Signed tCnttifirA wrladrl Isithfrbod rerrwAntwfiVP1 CERTIFICATE OF FIELD FABRICATION INSPECTION I ' undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province IBM_ and employed by of_ have compared the statements in this Data Report with the described piping subassembly and state that parts referred to as data items , not Induded in the Certificate of Shop Inspection, have been Inspected by me on , and that to the best of my knowledge and belief, the Certificate Holder has fabricated this piping subassembly in accordance with the ASME Code, Section III, Division 1. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the piping subassembly described inthis Data Report Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection. ginnid Commissions (Aiffivi-d Njwlm In.n.-IrA IN.-VI PA rwl and,~rtWI all m ~ W

                               . I P     t      O,  .LL*

FORM NIS-2 OWNER'S REPC A R REPAIRS OR REPLACEMENTS k As Required By The Provie ;is Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09(22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 02 F3 r Shared (specify Units 3a. Work Order # 98532393

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NWA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM4 WP 230656

4. Identification of System Reactor Coolant Class 1

5. (a) Applicable Construction Code ASME Ill NB 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Rep acement Components Column 1 Column 2 Column 3 -ColumTn 4 Column 5 Col. 6 Column 7 Column 8 lNationa ASME Code Name of Component Name of Maniufnotr Ier!Manufacturer Seri....u.bse*S I.- Board Nabdtift-on-l KpvkNomhr Other Year s.

Repaired, Replaced, o BuIt t IStamped (yes UeI low] F7 Repaired 1v No r Replaced r Yes A Piping Duke Power Company N/A WA N/A 1974 r Replacement r Repaired F No r Replaced r Yes B r- Replacement r Repaired r No r Replaced r Yes C F Replacement r Repalred r No r Replaced r Yes D r Replacement r Repaired r No r Replaced F Yes E -r Replacement F Repaired F No r Replaced r Yes F Replacement 1 Page 1 of12

Form NIS-2 (Back) Pace 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 112 in. x 11 in. (2) Information in items 1 through 'Bon this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Re-install reactor coolant piping for SG 2B.

8. Test Conducted: Hydrostatic r Pneumatic P Nominal Operating Pressure r Other r Exempt

                         -Pressure                psig                   Test Temp            _    F Pressure                psig                   Test TempO Pressure                psig                   Test Temp                OF

9. Remark: Existina reactor coolant piping had to be removed to allow removal of old SG and Installation of the new 2B steam generator. This NIS-2 covers the welding for re-Installing this piping. Applied Code Case N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the riles of the ASME Code, Section Xl. Type Code Symbol Stamp NWA Certificate of Authorization No. N *-{;2 6. Expiration Date N/A Signed 2 X4 CoI.LEt Date_ _______ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commislon iosued by the National Board of Boiler and Presure Vessel Inspectors and the State or Providence of /wz and employed by 7 have inspected the components described in this Owner's RepM during the period ;-/3- 041 to 4 7 -04 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report inaccordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. __ Commissions i,A3

                                                                                             )    2 Inspectos Signature                                        National Board, State, Providence and Endorsements Date      1II°L Page 2 of 2

Ir

                                                                      -   _  1-                            ..9......n_...

t - EiMe I I -I -. Enoll*l f lIl*ll f5,rien SG RH Edit/)View Weld Record Data II I I - - : ;- , &~ P7ckag 30S5B 3658 RCS MACHINING I WELDING SG 2B ANII W P Approval ; . Continue. ro. - Go ToW eld' -ackg( Z : : : ~ r 3 ;-

                                                                                     ,,'                                    fNDE 1/4                                           7 SDw=
               '11        776      %i '17

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Cr- As Required By The Prr I is Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09122104 Address 528 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 4

2. Plant Oconee Nuclear Station (Taylor Forge Elbow 2B)

Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit PI2 r13 r Shared (specify Units ) 3a. Work Order # 98532393

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. WA Expiration Date N/A 3b. NSM or MM # ON-23086 AM4 WP 23065B

4. Identification of System Reactor Coolant System Class I

5. (a) Applicable Construction Code ASME III 1989 Edition WA Addenda, No Addenda /Code Cases N-474-2 (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components X Column 1 Column 2 Column 3 Column 4 Column Col. 6 Column 7 [ Column 8 Nameo ComponentfFsimA Taylor Forge Manufacturer

                                                                   -Se........u.m r  1. Nationa Board Uai"  b6 Other tidentilication uu Year Bullt   or Replacement r Repaired ASME Code Repaired, Replaced, Stamped (yes or no) r No Taylor Forge Elbow     Engineered Systems,                                                                              r Replaced           F7 Yes 2B                       Inc.                 806050-1F               -A                          _   2004 1v Replacement

                                                           --         --                                             ----                    I Form NIS-2 (Back)

Sheet 2 of 4 NOTE: Supplemental sheets In form of lists, sketches, or drawings maybe used, provided (1) size (Taylor Forge Elbow 2B) is 8 1/2 In.x 11 in. (2) Information in items 1 through I on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of. this form.

7. Description of Work Replaced Unit 2 "B' RCS Hot Lea 145 Degree Elbow B.Test Conducted: r Hydrostatic r Pneumatic 1 Nominal Operating:Pressure r Other r Exempt Pressure _ _ psig Test Temp _ _ OF Pressure _ _ psig Test Temp _ _

0F Pressure _ _ psig Test Temp _ -F

9. Remarks: Applied Code Case N-41 6-1.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct aind this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No.gA Expiration Date N/A Signed SDate -t' , zz 'I CERTIFICATE OF INSERVICE INSPECTION i ,; I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of M _- and employed by 2+/- ZJQ have Inspected the components described Inthis Owners Report during the periodo'bazo to -: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his employer' makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind ansi from or connected with this Inspection. Commissionso3( D?5'a, 22 nspect s Signature National Board, State, Providence and Endorsements Date 2M (

                                                                                                                                                                                            -           I
                                                                                                                                        !dAl               UOp-4         l-VatV                    I FORM NPP-1 CERTIFICATE HOLDERS' DATA REPORT FOR FABRICATED                                                                       Pagers of                'f/

NUCLEAR PIPING SUBASSEMBLIES* s Required by the Provisions of the ASME Code, Section 111, Division I Pg. I of 2

1. Fabricated and certified by TAYLOR FORGE ENGINEERED SYSTEMS, INC., 208 N.IRON STREET, PAOLA, KANSAS 66071 (nane andaddress of NPT Ceule Holder

2. Fabricated for SGT OCONEE P.O. 817 SENECA, S.C. 29679

                                                                                                   *a- Sod a        )

3. Location of Installation DUKE POWER-COMPANY SGT OCONEE NUCLEAR STATION 155 EPICKENS HIGHVWAY SENECA, S.C. 29672 (mee and address of Pchaser)

4. Type: 806050-IF - 806050-1 Di R14 -_ _ 2004 (Cerl Hds serial no.) (CR1N) (drawing no) (Natl Bd.no.) (year buift)

5. ASME Code, Section IlIl, Division 1: 1989 1 N-474-2 (edilion) (addenda date) (das) (Code Case no.)

6. Shop hydrostatic test 3200 Psi at 70 IF(if performed)

7. Description of piping RCS HOT LEG 145 DEGREE ELBOW

8. Certificate Holders' Data Reports properly identified and assigned by commissioned inspectors have been furnished for the following items of this report

9. Remarks: OCONEE STEAM GENERATOR REPLACEMENT PROJECT CERTIFICATE OF SHOP COMPLIANCE We certify that the statements made in this report are correct and that the fabrication of the described piping subassembly conforms to the rules for construction of the ASME Code, Section IlIl, Division 1.

NPT Certificate of Authorization No. N-1937 expires November25 , 2004. Date 3 Name Taylor Forge Engineered Systems, Inc. Signed ____ (NPT cerlificate Hoder) (aliorized represent)v CERTIFICATE- OF SHOP INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Kansas and employed by HSB CT

             ,          of                      Hartford. CT                                      , have inspected the piping subassembly described inthis Data Report on 3                           and state that to te best of my knowledge and belief, the Certificate Holder has fabricated this piping subassembly in accordance with the ASME Code, Section IlIl, Division 1.

By signing this certificate neither the inspector nor " employer makes any wan' ty, e ressed or implied, concerning the piping subassembly described

  !in this Data Report Furthermore, neither the inse tor no                s mployer shall e liabl in any manner for any personal injury or property damage or a loss of any kind arising from or connected wi Date     .5    3/1   /10           Signed                                                                                om ssionsB/2v                  q 9 F                             7/      .

touzed Nuclear InspeMt / (Natil. Bd. (it endorsement state orprev.Andno.)

Supplemental information inform of lists, sketches, or drawings may be used p idew 1 size is 8 %A x 11, (2)information initems 1 through 4 on this Data Report is included on each sheet, (3)each sheet isnumbered and the number of sheets isrecorded at the top of this form.

Pmie. 3 oF t4 1F:'6rjC r=-Lbe,-j Z-S)

                                                                                                                                                                            ~ I FORM NPP-1 (Back               -  Pg. 2 of . 2 )

Certificate Holder's Serial No. 806050 -1F

0. Description of field fabrication I1. Pneu., hydro., or comb. test pressure psi at temp. IF(if performed)

CERTIFICATE OF FIELD FABRICATION COMPLIANCE We certify that the statements on this report are correct and that the field fabrication of the described piping subassembly conforms with the rules for construction of the ASME Code, Section 1I1,Division 1. NPT Certificate of Authorization No. Expires Date Name - Signed (Cerfiricate Holderi lautfivrized reoresentafive) CERTIFICATE OF FIELD FABRICATION INSPECTION I, th- mndersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed by of , have compared the statements in this Data Report with the described piping subassembly and state that parts referred to as data items , not included in the Certificate of Shop Inspection, have been inspected by me on , and thai to the best of my knowledge and belief, the Certificate Holder has fabricated this piping subassembly inaccordance with the ASME Code, Section III, Division 1. By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the piping subassembly described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Date Signed Commissions MAI-eAm M.sbo 1-sed% {Natn BDAFr.- eno n stale we Dv -an noI Date-SignedCommission PP,-.,e (--rA--kbr re. s T-L=Ue._ He~

C FORM NIS-2 OWNER'S REPW r As Required By The Pros.. R REPAIRS OR REPLACEMENTS ns Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 r3 Shared (specify Units __ _ _ _ _ _

3a. Work Order # 98532391

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date iWA 3b. NSM or MM # ON-23086 AM4 WP 23067A

4. Identification of System Reactor Coolant Class 1

5. (a) Applicable Construction Code ASME III NB 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repai red or Replaced and Replacement Components Column 1 Column 2 Column 3 column 4 Column 5 Col. 6 Column 7 Column 8 National ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Component Name Of ManUfcturer Serial Number Number Mdentlffoatlon su R.- Ro)of

_ _Repaired r. No r Replaced r Yes A Piping Duke Power Company W/A N/A N/A Sep-74 r ReplacementY r Repaired F No r Replacedr e B r Replacement _ Yes r Repaired r No r Replaced r Yes C r Replacement

                                                                                                                                    . Repaired           r   No F Replaced D          ______             _    _Replacement F Repaired           r No F Replaced           r Yes E                                                                                                                              r   Replacement F Repaired               F No F Replaced           r   Yes F                          _        _                                                                                              Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or draMngs maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items I through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets Isrecorded at the top of this form. V

7. Description of Work Re-install reactor coolant piping for SAG 2A. (

8. Test Conducted: r Hydrostatic r Pneumatic W Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp OF Pressure _ _ psig Test Temp OF Pressure _ _ _psig Test Temp _ _ OF

9. Remark: Existina reactor coolant piping had to be removed to allow removal of old SG and Installation of the new 2A steam generator. This NIS-2 covers the welding for re-Installing this hot leg piping. Applied Code Case N-416-1.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp NWA Certificate of Authorization No. -5 &p- Expiration Date N/A Signed I[42 ks Date c /Z /' G CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and essure Vessel Inspectors and the State or Providence of - N ) J - and employed by have inspected the components described in this Owners Report during the period <:2=3--0 to I .; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection. A)-AO- gX& jowevs no Co11410 (rMmmissions no _ , I I

      - -rpw-Rm --        n-a -                                     National Board, State, Providence and Endorsements Dnsct s+/-ignature Date        9       hi Page 2 of 2

r C FORM NIS-2 OWNER'S REPO - JR REPAIRS OR REPLACEMENTS I As Required By The Provisions Of The ASME Code Section Xl

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I 1P 2 r3 r Shared (specify Units 3a. Work Order # 98532393

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date WA 3b. NSM or MM # ON-23086 AM4 WP 23067B

4. Identification of System Reactor Coolant Class 1 5.(a)ApplicableConstructionCode ASMEIIINB 1989 Edition _UA AddendaNoAddenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column i Column 2 Column 3 Column 4 Column 5 1. Col. 6 Column 7 Column 8 National o- m netMnacu ASME Code Manufacturer Board Other Year Repaired. Replaced, Stamped (vea Name of component Name of Manufacturer Serial Number Number Identification Built or Replacement or no),

iv Repaired W No r Replaced r Yes A Piping Duke Power Company N/A N/A N/A 1974 r RepIacement r Repaired r No r Replaced r Yes B __ Replacement __Repaired r No r Replaced r Yes C r Replacement r Repaired r No F Replaced F Yes D I. Replacement r Repaired r No rReplaced E r Replacement rRepaired r No r Replaced r Yes F r Replacement Page 1 of 2

                                                                                                                                         - - Ii Forrn NIS-2 (Back)

Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (

7. Description of Work Re-install reactor coolant pIping for SG 2B.

8. Test Conducted: r Hydrostatic r Pneumatic P Nominal Operating Pressure F Other [ Exempt Pressure _ _ psig Test Temp _ _ OF Pressure _ _ psig Test Temp _ _ OF Pressure psig Test Temp _ OF

9. Remark. Existing reactor coolant'piping had to be removed to allow removal of old SG and Installation of the new 2B steam generator. This NIS-2 covers the welding for re-installing this hot leg pipIng. Applied Coide Case N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this repair or replacement conforms to tho rules of the ASME Code, Section Xl. Type Code Symbol Stamp NIA Certificate of Authorization No. #/A S KS Expiration Date NIA Signed _ ___ _ Datee . CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pr &sure Vessel Inspectors and the State or Providence of H and employed by 13C have inspected the components described in this Owner's Report during the periodis-- °Y to o ; and state that to the best of my knowledge and belief, the Owner has performed examinations and

-/-

taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector norbhis employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions A V0 ?S3. A. L Ins~ecor-'s~ignature National Board, State, Providence and Endorsements Date q-p)q Page 2 of 2

C -r-FORM NIS-2 OWNER'S REPOi k A REPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASME Code Section XI fn.

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit (r 1 F 2 r 3 F Shared (specify Units 3a. Work Order # 98530942

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM3 WP 23075A

4. Identification of System Emergency Feedwater Class 2

5. (a)Applicable Construction Code ASME IlI NC 1989 Edition N/A Addenda, No Addenda /Code Cases WA (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Re fcement Components_ _____ ____________ _________

Column I , Column 2 Column3 Column 4um5 - Col .6 Column 7 Column 8 Manufa-cturer Board IOther IYear lRepalred, Replaced, Stamped (ves

            -  NJame WmConponeni Name of Manutacturer               Seriai Number        Number          IdentificatIon     Built    or Replacement           or no) x7  Repaired          F No r Replaced             FY A                 Piping           Duke Power Company                 WA                NWA              N/A            1974     r   Replacement r Repalred            rNo r  Replaced          r  Yes B                                                                                                                                rReplacement r Repalred            r No r Replaced           r Yes C                                                                                                                                r Replacement F Repaired           F No r Replaced            FY D                                                                                                                                r Replacement r Repaired              FNo rReplaced            r  Yes E                                                                                                                                r   Replacement r Repalred             F No r Replaced            F Yes F                                                                                                                               rReplacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each.. sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install emergency feedwater Pl&ina for SG 2A.

8. Test Conducted: r Hydrostatic r Pneumatic Pr Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp _ _ OF Pressure _psig . Test Temp _ _ OF Pressure psig Test Temp OF

9. Remarlu Existing emergency feedwater piping had to be removed to allow Installation of the 2A isteam generator. I h15 NIIS-2 Covers mte welodinu for re-Instalsnun mtis Pouinu.

Applied Code Case N.416-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are conrect and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp NWA Certificate of Authorization No. ,/A 6&f- Ad 51<K<5C Expiration Date N/A Signed ," Y/A' ° Date c ZZ /5 4C CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commislon issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of . _ and employed by I s etC have Inspected the components described in this Owner's Report during the period7{;ic.Y to and state that to the best of my knowledge and belief, the Owner has performed examinations and

                      '.h7L taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descrited in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Comission A idd Y*3. A) Z Inspeckfrs Signature National Board, State, Providence and Endorsements Date Page 2 of 2

r FORM NIS-2 OWNER'S REPC by )R REPAIRS OR REPLACEMENTS As Required By The Prov. -as Of The ASME Code Section Xl _

1. Owner Duke Power Company l.a Date _0912204 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F 1 r3 r Shared (specify Units 3a. Work Order # 98530942 .

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM3 WP23075A

4. Identification of System Emergency Feedwater Class 2

5. (a) Applicable Construction Code ASME III NC 1989 Edition W/A Addenda, No Addenda _Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.):

6. Identification of Components Repaired or Replaced and Rep acement Components Column 1 Column 2 Column 3 Column4 Column 5 Col. 67 u Column 8 Manufacturer Board Other Year Repalred, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number dent!f!cat!on Bu!!t or Replacement orno

                                                                                                                                  ._PRepaired           WoNo Hanger/Support                                                                                                     FrReplaced            F yes A           2-03-148HA-H2B        Duke Power Company                 N/A              WA                N/A          1974    r   Replacement
                                                                                                                                    ; Repalred          W No Hanger/Support                                                                                                   r Replaced            r Yes B           2-03-1480A-H1B        Duke Power Company                 N/A                A               N/A          1974    r Replacement W Repaired            r No Hanger/Support                                                                                                   r Replaced            r Yes C          2-03-1480A-H6106       Duke Power Company                 N/A              NA               N/A           1974    r   Replacement WoRepaired            W No Hanger/Support                                                                                                   r   Replaced          r   Yes D          2-03.1480A-H6107       Duke Power Company                 N/A              N/A              WA            1974    r- Replacement W Repaired            W No Hanger/Support                                                                                                   r Replaced            r   Yes E          2-03-1480A-H6109       Duke PowerCompany                  N/AN/A                                A         1974    r Replacement

_ Repalred r No r Replaced r Yes F r_ Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 12 in. x 11 in. (2) Information in items 1 through e,on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove/reolace supports for removal of Interferences for SG 2A removal.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other 1V Exempt Pressure _ _ psig Test Temp 'F Pressure '_ psig Test Temp OF Pressure psig Test Temp _ _ OF

9. Remark: Hangers were removed for the removal of the 2A SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rulbs of the ASME Code, Section Xl. Type Code Symbol Stamp NIA Certificateof Authorization No F -5W , S Expiration Date NIA Signed 1 Date / Z q0 . eSS iS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. CERTIFICATE OF INSEFVICE INSPECTION A___ 1,the undersigned, holding a valid commision Issued by the Nalional Board of Boiler and Pre sure Vessel Inspectors and the State or Providence of No _ and employed by have inspected the components descr bed In this Owners Report during the period to 7 ^~i ;and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employ6r makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

     -6fkkL           4 Au                          Cnmmissinns
                                                       ....... . ..       MdD XS3.              UI
          'inIspetor's Signature                                       National Board, State, Providence and Endorsements Date                    ---DV Page 2 of 2

( FORM NIS-2 OWNER'S REPO(C 3R REPAIRS OR REPLACEMENTS As Required By The Prov is Of The ASME Code Section Xl C1

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 WI2 r3 r Shared (specify Units 3a. Work Order# 98530949

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NWA Authorization No. NIA Expiration Date NWA 3b. NSM or MM # ON-23086 AM3 WP 23075B

4. Identification of System Emergency Feedwater * ~ Class 2

5. (a)Applicable Construction Code ASME IlI NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repred or Relaced and Re ment Components Column 1 Column 2 Column 3 Column 4 Column 5 Col.6 Column 7 Column 8 NationalASME Code Manufacturer Board Other Year Repalred, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number NNumhpr WdentU.:f1aon DUll or Repiacement or no)

                                                                                                                                  - Repaired            F  No A                 PipIng          Duke Power Company                 N/A              N/A              N/A            1974   r FReplaced Replacement       Ce Ye
                                                                                                                                  .r Repaired             F No B                                                                                                                             r   Replacement       rYes

_ Repaired r No r Replaced r Yes c r Replacement r r Replacedr RepaIred r No e D r Replacement Replaced r Yes rrF Repalred r No E i Replacement r Repalred r No r Replaced r Yes F ____ __r Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report Isincluded on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install emergency feedwater pining for SG 2B.

8. Test Conducted: F Hydrostatic F Pneumatic 7 Nominal Operating Pressure F Other F Exempt Pressure psig Test Temp OF Pressure _ psig Test Temp OF Pressure psig Test Temp OF

9. Remarke Existing emergency feedwater 1lping had to be removed to allow Installation of the 2B steam generator. This NIS-2 covers the welding for re-installing this piping.

Applied Code Case N-416-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section XI. Type Code Symbol Stamp N/A Certificate of AuthorizatioN N/A Expiration Date N/A Signed_ __ Date q ZZ 04'- L -I_ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _

                                                                                                                                  -- I Mm                                         CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the Nalional Board of Boiler and Pressure Vessel Inspectors and the State or Providence of             ( .        .,         and employed by -                 Er have inspected the components described in this Owner's Report during the period to _~ _          ;andstate    that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Cods, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising or connected with this inspection. In~pec-G Signature Commissions iN3, A K National Board, State, Providence and Endorsements Date 9 by I Page 2 of 2

f FORM NIS-2 OWNER'S REPC - OR REPAIRS OR REPLACEMENTS As Required By The Prow. us Of The ASME Code Section Xi

1. Owner -2Duke S Power Companyh -- N -- l.a 09/22/04

__te Address 526 S. Church Street, Charlotte, NC 28201,-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 1v 2 r 3 r Shared (specify Units _

3a. Work Order # 98530949

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM3 WP23075B

4. Identification of System Emeraencv Feedwater Class 2

5. (a)Applicable Construction Code ASME III NC 1989 Edition NL/A Addenda, No Addenda /Code Cases NLA (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Column 8 NationalASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number Number A.cntlflcatIon Buiit or Replacement or no) i Repaired iv No Hanger/Support F Replaced r Yes A 2-03A-1480A-H3A Duke Power Company N/A N/A NWA 1974 r Replacement P Repaired iv No Hanger/Support .r Replaced r Yes B 2-03A-1480A-H6263 Duke Power Company N/A N/A NWA 1974 r Replacement

                                                                                                                                     . eRepalred           r No Hanger/Support                                                                                                    rF Replaced           FYes C          2-03A-148OA-H6111      Duke Power Company                N/A               N/A              N/A            1974      r Replacement r Repaired             FNo r   Replaced          r  Yes D                                                                                                                              r    Replacement r    Repaired          r  No r Replaced            r  Yes E                              lr                                                                                                   Replacement

l. Repaired r No Fr Replaced I Yes F Fr Replacement Page 1 of 2

                            -           --                                                                                                       I Form NIS-2 (Back)

Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size Is 8 1/2 In.x 11 in. (2) Information in items 1 through 6 on this report is Included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form. (

7. Description of Work Remove/rePlace supoorts for removal of Interferences for SG 2B removal.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other P Exempt Pressure _ _ psig Test Temp _ _ OF Pressure psig Test Temp OF Pressure _ _ psig Test Temp OF

9. Remark. Hangers were removed for the removal of the 2B SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the'ASME Code, Section Xl. Type Code Symbol Stamp NI/A Certificate of Authorization No. NIZ *, J Expiration Date N/A

                                                                &E4 Ca. E    ,EA Signed g/             A/                                                   Date        '-I/   z-e     o6

'I--

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and assure Vessel Inspectors and the State or Providence of '1 .. _ _ and employed by I? C X have Inspected the components desciibed in this Owner's Report during the period I

toI4~ Tand state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ktL Inspeict4s Signature GCommissions +JcV5 3. M I National Board, State, Providence and Endorsements Date 3l qU) ' Pag 2 of 2

r- FORM NIS-2 OWNER'S r U 3T FOR REPAIRS OR REPLACEMENTS As Required By The * .4trislons Of The ASME Code Section Xi f

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-logo Sheet I of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 Pr2 r-3 F Shared (specify Units 3a. Work Order# 98516356

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM1 WP 23080A

4. Identification of System _Main Steam Class 2

5. (a) Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Replacement Components _______

Column 1 Column 2 Column3 C C 4 Column 5 Coi. 6 Column 7 Column 8 National ASE Coe Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Compon ..... e :ur .--. Nae

                                                               ^r'a                   '..t. 1b                                       eon                                  --

ova ..ial. CPI Ivlululayl IV.IIWVIMulit Wt nupmVu0 I ut11=111 WI, 1- Repaired P No r Replaced r Yes A Piping Duke Power Company N/A N/A N/A 1974 r Replacement r Repalred r No r Replaced r Yes B r Replacement rYes r Repalred r No r Replaced r Yes C FrReplacement r Repalred r No r Replaced r Yes D r Replacement r Repaired r No F Replaced r Yes E rPReplacement F-Repaired rF No F ReplacedrYe F r- Replacement Page 1 of 2

                                                                                          - l-                         EMNNMMOI Form NIS-2 (Back)

Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (

7. Description of Work install main steam plplng for SG 2A.

8. Test Conducted: f- Hydrostatic r Pneumatic W Nominal Operating Pressure r Other r Exempt:

Pressure psig Test Temp _ _ 'F Pressure psig Test Temp _ _ 0F Pressure psig Test Temp °F

9. Remarks Existing main steam PlPlng had to be removed Ito allow Installation of the 2A steam generator. This NIS-2 covers the welding for re-Installing this plping.

Aonlied Code Case N-416-1. (Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correci and this repair or replacement conforms to the nrles of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No A Expiration Date NIA Signed H i ,/ 2/ E Date c z / 1o I CERTIFICATE OF INSERVICEE INSPECTION 1,the undersigned, holding a valid commision ipsjied by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of - MeJ_ and employed by - S EELS have Inspected the components described In this Owners Report during the period 2z / to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Cotde, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

    -4A1&k            Lv%                         Commissions Ma T 53, A.                    I Irnpecftor Signature                                          National Board, State, Providence and Endorsements Date     9 n2Ying Page 2 of 2

f FORM NIS-2 OWNER'S REPC i )R REPAIRS OR REPLACEM'1ENTS As Required By The Provi- as Of The ASME Code Section Xi

.(

1. Owner Duke Power Company 1.a Uate _0.Zrc0U4 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 4

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I PW2 r3 r Shared (specify Units _

3a. Work Order # 98516356

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201.1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AMI WP23080A

4. Identification of System Main Steam Class 2_

5. (a)Applicable Construction Code ASME Ill NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class. MC and cc and their supports.)

6 IdAntificatinn of Componants RAnAlrAd or RAnlaned and Replacement CnmnonAnts Column 1 _ Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Coumn I ational ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Coinonent Name of Manufacturer Serial Number Number Mdent~f-tion Bu!!t o Rep'aem-ents or

                                                                                                                                                           -o) wo Repaired          Pr No Hanger/Support                                                                                                  r Replaced           r Yes A          2-O1A-0-1481A-H1B      Duke Power Company                 N/A              N/A              N/A          1973     r  Replacement P Repaired            1P No Hanger/Support                                                                                                  r  Replaced          r   Yes B          2-O1A-0-1481A-H7B      Duke Power Company                 N/A              N/A              N/A          1973    r   Replacement Po Repaired           P No Hanger/Support                                                                                                  r  Replaced          r   Yes C          2-OIA-0-1481A-H3B      Duke Power Company                 N/A              N/A              N/A          1973    r   Replacement

__ Repaired 17 No Hanger/Support rReplaced rYes D 2-01A-0-1480A-H9B Duke Power Company NWA N/A NIA 1973 r Replacement __ Repaired Pr No Hanger/Support rReplaced r Yes E 2-O1A-0-1481B-H2B Duke Power Company N/A N/A N/A 1973 r Replacement W Repaired 1P No Hanger/Support r Replaced r Yes F 2-01A-0-1481B-H8B Duke Power Company N/A N/A N/A 1973 r Replacement Page 1 of 4

Form NIS-2 (Back) Sheet 2 of 4 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2)Information in items 1 through 43on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is Sheet 2 of ' -4 this form.

7. Description of Work Removelreolace supoorts for removal of Interferences for SG 2A removal.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other 1v Exempt Pressure _ _ psig Test Temp . .OF Pressure psig Test Temp : OF Pressure _ _ psig Test Temp _ OF

9. Remarkz Hangers were removed/Dinned for the removal olf the 2A SG and replacedfunpinned after Installation of the new replacement steam cenerator. :

(Applicable Manufacturer's Dala Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Page 1 of 4 Certificate of Authorization No. N &EAA SeVIOg. Expiration Date N/A Signed I , / Date - 9 /b' CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of A. C . _ and employed by have inspected the components described in this Owner's Report during the period to - ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of anry kind arising from or connected with this inspection. _gn, Signature Commissions / Y!5S3 1 A) I Nalional Board, Sfate, Providence and Endorsemenis Date 9 ? wM Page 2 of 4

( F.3-2 (Back) Forn. dk~* '1 .- A

0. ulwe

1. Owner Duke Power Company l.a Date _09/22/0j4.

Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 3 - of 4

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 F.2 r3 r Shared (specify Units 3a. Work Order# 98516356

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM1 WP23080A

4. Identification of System Main Steam Class 2

5. (a) Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda ICode Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class. MC and cc and their supports.)

6. Identification of Components Repared or Replaced and Rep ment Components Columni1 Column 2 Column 3 Column 5 Col. 6 Column 7 Column 8 I Year

_olmn_ jNational - Code Manuacturer Board Other Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number Number Identification BuIlt or Replacemnent Cor -f) 1v Repaired F No Hanger/Support r Replaced r Yes G 2-O1A-0-1481A-H1OB Duke Power Company N/A N/A N/A 1973 r Replacement F Repaired i7 No Hanger/Support r Replaced r Yes H 2-01A-0-1481A-H6B Duke Power Company N/A N/A N/A 1973 r Replacement _ _ __ Repaired p No Hanger/Support r Replaced r Yes 2-01A-0-1481A-H11B Duke Power Company N/A N/A N/A 1973 r Replacement r Repalred r No rReplaced r Yes r Replacement F Repaired r No r Replaced rYes r Replacement r Repaired r No r Replaced r Yes rFReplacement

Form NIS-2 (Back) Sheet 4 of 4 NOTE: Supplemental sheets In form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information In items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove/replace supports for removal of Interferences for SG 2A removal.

8. Test Conducted: r Hydrostatic r Pneumatic - Nominal Operating Pressure r Other F Exempt Pressure _ _ psig Test Temp _ IF Pressure psig Test Temp °F Pressure psig Test Temp OF

9. Remark: Hangers were removed/nlnned for the removal of the 2A SG and replacedfunpinned after Installation of the new replacement steam venerator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section XI. Type Code Symbol Stamp NWA Certificate of Authorization No. N/ 5 I IExpiration Date NIA Signed IE I Date q a' 0 / CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision iss ed by the National Board of Boiler and Prps re Ve 5 I Inspectors and the State or Providence of _ and employed by f El have inspected the components described In this Owners Report during the period 29~s

                 ;and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Ownees Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisin~g fron or connected with this inspection. A, )A Ins aeos~ignature

                                        ,         CnmmissioinnsQt
                                                   .                  \ 53, I.                         7 National Board, State, Providence and Endorsements pate     q-aq Page 4 of 4

f FORM NIS-2 OWNER'S REr (.- FOR REPAIRS OR REPLACEMENTS -IW As Required By The Pro. .ons Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 r3 r Shared (specify Units 3a. Work Order # 98516357 _ .

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NWA Authorization No. WA Expiration Date NWA 3b. NSM or MM # ON-23086 AMI WP 23080B

4. Identification of System Main Steam Class 2

5. (a) Applicable Construction Code ASME liI NC 1989. Edition _ULA -Addenda, No Addenda iCode Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Replacement Components Column I Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Column 8 Nationa ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes NameofComponent Name of Manuftrer SerialNumber Number IT adentification Bulit or Replacement or no) 1NN Repaired ASMN Co rReplaced r Yes A Piping Duke Power Company N/A WA N/A 1974 r Replacement r RepaIred No r Replaced r Yes B r Replacement __Yes r Repalred r No r Replaced r' Yes C r Replacement r Repalred r No r Replaced FY D - Replacement r Repaired No rReplaced F Yes E r Replacement r Repaired F No r Replaced r Yes F _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Replacement Page 1f12

Form NIS-2 (Back) Page 2 of 2 NOTE. Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through l; on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install main steam Piping for SG 2B.

8. Test Conducted: Hydrostatic r Pneumatic 1 Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp OF Pressure _ _ psig Test Temp . F Pressure __ _ peig Test Temp _ OF

9. Remark* ExIsting feedwater DDllnO had to be removed to Ellow InstallatIon of the 2B steam generator. This NIS-2 covers the weldina for re-Installlna this PiDing.

Applied Code Case V-416-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. SAR k& k SeI\tb . Expiration Date N/A Signed Z/2Z st Date hatMM CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commislon issued by the National Board of Boiler and trerhureYessel Inspectors and the State or Providence of -N C- _ and employed by & 5-k3Ca have inspected the components described in this Owner's Report during the period 9-20V to /i° and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employor makes any warranty, expressed or implied, concerning the examinations and corrective measures described ii this Owners ReporL Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. _A'VCommissionsna A 53 - ) I 2: InspectioKSIgnature National Board, State, Providence and Endorsements Date Pago 2 of 2

f FORM NIS-2 OWNER'F As Required ByTh.

                                                                                   £ f-  ORT FOR REPAIRS OR REPLACEMENTS ovislons Of The ASME Code Section Xl

(

1. Owner Duke Power Company 1.a Date 09/2204 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet -- 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 P2 F3 r Shared (specify Units )

3a. Work Order # 98516357

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AMI WP23080B

4. Identification of System MaIn Steam Class 2

5. (a) Applicable Construction Code ASME IlIl NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of CnmnnnAntR Ranairarl nr Rnlanarl Anrd Mantamant r Column 1 Column 2 Column3 Coln4 Column5 1Col.6 Column7 l Column 8 I _ IASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Component Name of ManufSturer Serla! Number Nu.mer identification Buiit or Replacement or no)

W Repaired rv No Hanger/Support r Replaced FYes A 2-OIA-0-1480A-H7A Duke Power Company N/A N/A N/A 1974 r Replacement iv Repaired 1v No Hanger/Support r Replaced r Yes B 2-OIA-0-1480A-H1A Duke Power Compan N/A N/A N/A 1974 r Replacement id Repaired P7No Hanger/Support r Replaced r Yes C 2-O1A-0-1481A-H6A Duke Power Company N/A N/A NA 1974 r Replacement 1P Repaired 17 No Hanger/Support r Replaced r Yes D 2-O1A-0-1481A-H9A Duke Power Company N/A N/A N/A 1974 r Replacement 17 Repaired 1; No Hanger/Support r Replaced r Yes E 2-01A-0-1481A-H3A Duke Power Company N/A N/A NA 1974 r Replacement

                                                                                                                                      .v Repaired              P' No Hanger/Support                                                                                                    r   Replaced            r   Yes F         2-01A-0-1481B-H2A       Duke Power Company                  N/A              N/A              N/A            1974    r Replacement Page 1 of 2

                                                                          -I Form hIS-2 (Back)

Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report Is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove/replace supports for removal of Interferences for SG 2B removal.

8. Test Conducted: F-Hydrostatic F Pneumatic r Nominal Operating Pressure r Other be Exempt Pressure _ psig Test Temp .. 'F Pressure psig Test Temp .. "F Pressure psig Test Temp "F

9. Remarku Hancers were removed/pInned for the removal of the 2B SG and replacedfunolnned after Installation of the new replacement steam venerator.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Cerlificateof Authorization No. WA !5 e-ft-k se^. cr- Expiration Date WVA Signed &I KA E D ate _ _ _ _ _ _ _ _ _ CERTIFICATE OF INSERVICIE- INSPECTION 1,the undersigned, holding a valid commision isued by the National Board of Boiler and Pressure-Yessel Inspectors and the State or Providence of / and employed by

Qt -

have inspected the components described in this Owner's Report dunng the period -7_oy tog D s'andstate that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. k&i4A Commissions 63C 535 a, J

    - Inspector'? Signature                                       National Board, State, Providence and Endorsements Date         ,   C a          0 t° Page 2 of 2
                                                                                                                                          )

    -r                                                FORM NIS-2 OWNER'S REPr - ')R REPAIRS OR REPLACEMENTS As Required By The Pros ".a Of The ASME Code Section Xl                                                 IC

1. Owner Duke Power Company 1.a Date _09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 Pr2 r3 r Shared (specify Units 3a. Work Order # 98516357

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AMI WP23080B

4. Identification of System Main Steam Class 2

5. (a)Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda /Code Cases WA (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Compoents Repaired or Replaced and Replcement Components-I Column 1I Column 2 I Column 3 Colmn Column 5 Col. 6 Column 7 jColumn 8 I _ Manufacturer NationalSIAME Board Other Year Code Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number Number Identification Ruiltl r p I or no)

PvRepaired Pr No Hanger/Support r Replaced r Yes A 2-OIA-0-14SA-H8A l Duke Power Company l NWA WA A 1974 r Replacement PvRepaired RNo r Replaced Yes B r Replacement PoRepaired P7 No r Replaced rYes C r Replacement F Repaired Pr No 11-Replaced Y~es D r Replacement P RepaIred FP, No F- Replaced Y,es E r Replacement PRepaired PN r Replaced F Yes F r. Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets Inform of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report Is included on each sheet, and (3) each sheet is numbered and the number of sheets Is recorded at the top of -- this form.

7. Description of Work Remove/replace supports for removal of Interferences for SG 2B removal.

8. Test Conducted: r Hydrostatic r Pneumatic F Nominal Operating Pressure r Other 17 Exempt Pressure _ psig Test Temp _ _ OF Pressure -_ psig Test Temp OF Pressure _ psig Test Temp OF

9. Remark. Hangers were removed/linned for the removal of the 26 SG and replacedfunpinned after Installation of the new replacement steam generator.

(Applicable Manufacturer's Dala Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made inthe report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. 15/6-\ is rp.1evExpiration Date N/A Signed }'-4 A-_ Date e7 e/oet CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressre Vessel Inspectors and the State or Providence of - C ___ and employed by h W 1 C have inspected the components described in this Owners Report during the period270 to FJq ;and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report in accordance with the requirements of the ASME Coce, Section XI. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any dnd arising from or connected with this inspection. Jo.-ins -- - Ban 8itl @@8Vffi he . 46rp&9s Signature National Board, State, Providence and Endorsement, Date - f e.0_ ) Page 2 of 2

FORM NIS-2 OWNER'S r id IT FOR REPAIRS OR REPLACEMENTS As Required By The,r.vIslons Of The ASME Code Section Xl C

1. Owner Duke Power Company L.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I r72 F3 r Shared (specify Units _

3a. Work Order # 98516899

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM2 WP 23085A

4. Identification of System Feedwater Class 2

5. (a) Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Rep acement Components ;

      -              Column 1                  Column 2                Column 3         Column 4         Column 5         Col. 6 Column 7                 Column 8 National                                                        A       Code Manufacturer        Board             Other           Year Repaired, Replaced, Stamped (yes ia     01    1pumici.t Nami 0i mo"Wanu;aurer         Sab Number         blaemet                                                            AM    Code PO Repaired           fv No r Replaced            r Yes A                 Piping          Duke Power Company                 N/A              N/A              N/A            1974   r Replacement r   Repaired          r No r Replaced            r Yes B                                                                                                                            r Replacement r   Repalred          r   No r Replaced            r   Yes C                                                                                                                            r   Replacement r Repaired              F No r Replaced            r   Yes D                                                                                                                            rReplacement r Repaired            F No r Replaced            r Yes E           _                                                                                                                    Replacement F Repaired          r   No F Replaced          r   Yes F                                  _                                                                                _            Replacement Page 1 of 2

Form NIIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 13on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install feedwater piolna for SG 2A.

8. Test Conducted: F Hydrostatic F Pneumatic P Nominal Operating Pressure r Other I Exempt Pressure psig Test Temp . F Pressure psig Test Temp OF Pressure psig Test Temp OF

9. Remark: Existing feedwater ololna had to be removed to allow Installation of the 2A steam generator. This NIS-2 covers the weldina for re-installing this ollnag.

Apnlied Code Case N-416-1. (Applicable Manufacturer's Dalta Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the nules of the ASME Code, Section Xi. Type Code Symbol Stamp WiA Certificate of Authorization IV. NWA ; 5 b Expiration Date WA Signed C Date °?/ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision i6sued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of -__- and employed by iv S3C-' have inspected the components described in this Owner's Report during the period zV^79 to i> L. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. commissions __JA) tS3, InspeC o's Signature National Board, State, Providence and Endorsements Date . 91 ftI bL Page 2 of 2

C FORM NIS-2 OWNER'S RF As Required By The Pi,

                                                                                    £-  FOR REPAIRS OR REPLACEMENTS Aions Of The ASME Code Section Xi lo

1. Owner Duke Power Company 1.a Date .09122104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I 1; 2 r 3 - r Shared (specify Units 3a. Work Order # 98516899

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM2 WP23085A

4. Identification of System Feedwater Class 2

5. (a)Applicable Construction Code ASME IlIl NC 1989 Edition N/A Addenda, No Lddenda Code Cases NWA (b)Applicable Edition of Section Xl Utilized for-Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Comnonanfi I Column 1 Column 34 3

National Columnt Col. 6 Column 7 Column 8 ASME Code

                                                   .                Manufacturer         Board             Other         Year Repaired, Replaced, Stamped (yes Name of Component Name of Manuf cturer             Ser!al Number        Mumberr              ium enf;fiion              or Replacement              or no)
                                                                                                                                 .v Repaired            Pr No Hanger/Support                                                                                                r Replaced             rF Yes A            2-03-0-1480B-H6B    Duke Power Company                 N/A               NIA              N/A          1974    r Replacement r Repalred             r No rReplaced             r    Yes B                                                                                                                           r Replacement r Repalred             r No r  Replaced            r   Yes C                                                                                                                           r Replacement r Repaired             r No rReplaced                -Yes D                                                                                                                           FReplacement r Repalred             r No F-ReplacedrYe E           .                                                                                                                  Replacement        r Yes F. Repaired           r No Fr Replaced           or Yes F                                                                                                                           r Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size Is 81/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Secure/restraln supports for removal of Interferences for SG 2A removal.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other 17 Exempt Pressure psig Test Temp OF Pressure ____psig Test Temp _ _ OF Pressure _' Ipsig Test Temp .OF

9. Remark: Snubber was removed for the removal of the 2A SG and reinstalled after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. NWA 5 , Expiration Date N/A Signed */ A / e Date 't 22/.6 CERTIFICATE OF INSERVICEE INSPECTION J0w I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of C . and employed by - have inspected the components described in this Owner's Report during the period .IDlO-4 to .*:Xer S, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of anY kind arising from or connected with this Inspection.

             °LO. e          .                      Commissions          CA-3(m                     C Inspector's Vigtature                                    National Board, State, Providence and Endorsements Date         3           O4
                       °0-Page 2 of 2

f C FORM1. NIS-2 OWNER'S REP( - JR REPAIRS OR REPLACEMENTS (20 As Required By The Provi..-ns Of The ASME Code Section Xl

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit FI W2 r3 F-.Shared (specify Units 3a. Work Order # 98516911

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. NiA Expiration Date NIA 3b. NSM or MM # ON-23086 AM2 WP 23085B

4. Identification of System Feedwater Class 2

5. (a)Applicable Construction Code ASME Ill NC 1989 Edition NIA Addenda, No Addenda tCodeCases N/A (b) Applicable Edition of Section XI Utilized for Rep-airs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Re cment Corponents Column 1 Column 2 Column 3 - Column 4 Column 5 Col. 6 Column 7 Column 8

_ Nationai - SECd Manufacturer Board Other Year Repaired, Replaced. Stamped (yes tComponent me -t Number IdentificatIon Built or Replacement or no) P Repaired Pr No r Replaced r Yes A Piping Duke Power Company N/A N/A N/A 1974 r Replacement F-Repaired r No r Replaced r Yes B r Replacement r Repaired r No r Replaced r Yes CrReplacement r Repaired r No rReplaced r Yes D rReplacement r Repalred r No r Replaced r Yes E __ _Replacement r RepaIred F No r Replaced F Yes F r Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install feedwater piping for SG 2B.

8. Test Conducted: r Hydrostatic F Pneumatic 17 Nominal Operating Pressure r Other r Exempt Pressure _ _psig Test Temp . .OF Pressure psig Test Temp OF Pressure _ _ - psig Test Temp OF

9. Remarl Existing feedwater olalna had to be removed to allow Installation of the 2B steam generator. This NIS-2 covers the welding for re-Installing this plplnq.

Applied Code Case N-416-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp NWA Certificate of Authorization pNA o NA

Expiration Date WA Signed_ Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of CA and employed by RSB- CT have inspected the components described in this Owner's Report during the period 2-1p-0 4 to 6-10 ^; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. i am Commissions '96 < AA po lnspector's~ithature National Board, State, Providence and Endorsement., Date 9-Qk3- as Page 2 of 2

A FORM NIS-2 OWNER'S REPC f JR REPAIRS OR REPLACEMENTS I As Required By The Provei is Of The ASME Code Section Xi

1. Owner Duke Power Company l.a Date 09/104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear StatIon Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r- 1 rv2 r3 FnShared (specify Units 3a. Work Order # 98516911

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. W/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM2 WP230858

4. Identification of System Feedwater Class 2 -M

5. (a) Applicable Construction Code ASME III NC 1989 Edition W/A Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repired or Replacedand Re ment Components Column 1 Column 2 Columnl3 Column 4 Column 5 Col. 6 Column 7 Column 8 National ASME Code N Manufacturer Board Other Year Repaired, Replaced, Stamped (yesI Name of Component Name of Man___turer Serial Number Nu M ber Idertllfation Buit or Replacement or no)

F1;Repaired F No Hanger/Support r Replaced r Yes A 2-03-0-1479A-H2A Duke Power Company N/A 1974 r Replacement r Repaired F No rReplaced re B r Replacement rRepalred r No r Replaced r Yes C r Replacement r Repalred r No r Replaced r Yes D FrReplacement r Repaired F No

                                                                                         -~~                                          F Replaced           Fe E                                                                                                                                r Replacement rRepalred            r No
                                                                                                                                      ,   Replaced         r  Yes F                                                                                                                                    Replacement           1 Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove/restore supports for removal of Interferences for SG 2B removalfreplacernent.

8. Test Conducted: F Hydrostatic F Pneumatic r Nominal Operating Pressure F Other r7 Exempt Pressure _ _ psig Test Temp OF Pressure _ _psig Test Temp OF Pressure _ _ psig Test Temp _ _ OF

9. Remark: Hanger was removed for the removal of the 2B SQG and reinstalled after Installation-of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No NA 5 s4 Expiration Date NIA Signed Z/L em > t Date___________ CERTIFICATE OF INSERVICEi INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of CA and employed by " 13 -CT have inspected the components described In this Owners Report during the period 4-O)- 04 to ^ and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Coxle, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable Inany manner for any personal injury or property damage or a loss of any kind arising from o, cpnnected with this Inspection.

           .0.                                    Commissions                  k   (S                 A*<

Inspector's 4griure National Board, State, Providence and Endorsement; Date_9- 2___ Page 2 of 2

i_ r'k FORMrNi-2 OWNER'S RF ? FOR REPAIRS OR REPLACEMENTS As Required By The Pr....Oons Of The ASME Code Section Xl

1. Owner Duke Power Company l.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 1v2 r 3 - r Shared (specify Units _

3a. Wnrk Ordar A 985328IR

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. NWA Expiration Date N/A 3b. NSM or MM # ON-23086 AM5 WP 23522A

4. Identification of System SG Secondarv DraIns clamq 2 ..

5. (a) Applicable Construction Code ASME IIfNC 1989 Edition N/A Addenda, No Addenda Cases N/A

                                                                                                                           /Code (b) Applicable Edition of Section XI Utilized tqr Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Rep acement Components Column 1 Column 2 Column 3: Column 4 Column 5 Col. 6 Column 7 Column 8

__ _ __ __ __ o ~ a uf otir __ rN Manufacturer ational BoardOther Of e - Year e i c d~ A SME C ode Repaired, Replaced, Stamped Name of Component Name of.Manufachirpr Serial Numhpr Number dent~fl^at!on Bullt orReplacme.G,:t or now)

                                                                                                                                           . Repaired           Wo No r Replaced             r  yes A               PIping             Duke Power Company                    N/A              N/A                N/A            1974     r   Replacement rRepalred               r No I- Replaced             F es c_     _     _       _      _r_                                                                Replacement r RepaIred              F No Dr Replaced            r  Yes C                                                                                                                                    I- Replacement r Repaired              r No I- ReplacedrYe D                                                                                                                                   r   Replacement           Yes
                                                                                                                                           'F   Repaired              No rF Replaced             Fe E                                                                                                                                      rReplacement
                                                                                            /                                                   Repaired            F-No r- ReplacedFYe F                                                                     ,-                                                                 Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Re-Install SG secondary drain pining for SG 2A.

8. Test Conducted: F Hydrostatic r Pneumatic 17 Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp OF Pressure psig Test Temp _ _ OF Pressure _ _ _ psig Test Temp OF

9. Remark: ExIsting SG secondary drain plying had to be removed to allow removal of old SG and Installation of the new 2A steam generator. ThIs NIS-2 covers the welding for re-Installing this piping. Applled Code Case N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A a toq>Expiration Date NIA vSigned E G3 L( On Date a9/zIC) f CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of CA _ and employed by 3- Ct have Inspected the components described in this Owner's Report during the period to .. 3fr.4*: and state that to the best of my knowledge and bolief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or onnected with this inspection.

      *    .O.                                    Commissions                                        ,

Inspector's *n 1ature National Board, State, Providence and Endorsement:; Date _ 3 O9 Page 2 of 2

r r FORM NIS-2 OWNER'S REPr z JR REPAIRS OR REPLACEMENTS As Required By The Prow. as Of The ASME Code Section Xl C

1. Owner Duke Power Company l.a Date 09/22104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I Pr 2 r3 r'Shared (specify Units )

3a. Work Order # 98532818

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM5 WP23522A

4. Identification of System SG Secondary Drain Lines Class 2

5. (a) Applicable Construction Code ASME IlIl NC 1989 Edition NWA -Addenda, No Addenda /Code Cases NA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replceent Cornponents ______________

    -       ~        Column 1                  Column 2                Column 3            Column 4            Column 5         Col. 6 Column 7              ]Column 8 iASME                                Code C               Manufacturer             Board              Other          Year    Repaired, Replaced, Stamped (yesl Name of C               Name of Manifacturer          Serial          Num            ber      Ideifliicaiion     Buiut   or Replacement             or no)
                                                                                                                                        .. Repaired       i     7 No Hanger/Support                      .r                                                                                    Replaced           r   Yes A          2-04-0-1478A-H14A      Duke Power Company                  N/A                  N/A               WA            1974      F Replacement
                                                                                                                                        - Repaired             P No Hanger/Support                                                                                                        r Replaced              FYes B          2-04-0-1478A-HlIA      Duke Power Company                  W/A                   N/A              N/A           1974    r Replacement

_FRepaired FoNo Hanger/Support r Replaced r Yes C 2-04-0-1478A-H5A Duke Power Company NA N/A N/A 1974 r Replacement F Repaired 1 No Hanger/Support F Replaced FYes D 204-0-1478A-H3A Duke-Power Company N/A N/A N/A 1974 r Replacement

                                                                                                                                        .F Repaired            F7 No Hanger/Support                                                                                                         rReplaced               F Yes E           2-04-0-1478A-H2A      Duke Power Company                  N   _'WN/A                             NIA           1974      F Replacement
                                                                             .   .     .                                                17 Repaired            F No Hanger/Support                                                                                                         rReplaced             rYes F         2-04A-0-1478A-H21A      Duke Power Company                   NA                  N/A               N/A           1974    r   Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove and replace SG 2A secondary drain lines In support of SG RePiacement.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other iv Exempt Pressure _ _ psig Test Temp . F Pressure _ _ psig Test Temp __ OF Pressure _ _ psig Test Temp OF

9. Remark. LIsted hangers were removed for the removal of the 2A SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Dala Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code-Symbol Stamp N/A Certificate of Authorization 1 o. N/A S Expiration Date N/A Signed __________________ Date J O + CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of CK and employed by UGS - Ct have inspected the components described in this Owner's Report during the period .z-i2'`4 to r and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ L .C). Commissions wwBw wax a aW_ _ N zA. ffi Inspector's SII)narre National Board, State, Proviaerice and Endorsements Date 99- a 4 Page 2 of 2

r FORM NIS-2 OWNER'S REPO C )R REPAIRS OR REPLACEMENTS C 0 As Required By The ProviA is Of The ASME Code Section Xl

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I is 2 '-3 r Shared (specify Units )

3a. Work Order # 98532820

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM5 WP 23522B

4. Identification of System SG Secondary Drains, Class 2

5. (a) Applicable Construction Code ASME ill NC > 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repared or Replaced and Re ment Components _ _

j[- _ Column 1 Column.2 ar e T Column 3 Manuacturer Column 4 National Board Column 5 Other f Col. 6 Column 7 r R Year Repalred, Replaced, Column 8 _ASME Code E oStamped)(yes Name of Component Name of Mnd___rr Serfe! N *m$_r N-mbe I er Bun;ti:eatfoiiiot r Repiacement or no)

                                                                                                                                     , Repaired             rv No r   Replaced A                  Piping        Duke Power Company                 NWA                N/A               N/A            1974     rReplacement r   Repaired           r No r   ReplacedF C                                                                                                                                r Replacement         _____

I Repaired F No rReplaced l Yes C _ _ _r__ _ _ _ _ _ _ _ Replacement__ F Repaired FrNo FrReplaced Ye D FReplacement FRepaired FN

                                                                                                  -                                    F R p ai r d          r-N o F Replaced            Fe F                                                                                                 F-Replacement Pa e 1oE

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 13on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (

7. Description of Work Re-Install SO secondary drain pipina tor SO 2B.

8. Test Conducted: r Hydrostatic F Pneumatic W Nominal Operating Pressure r Other r Exempt 0

Pressure _ _ psig Test Temp___ F Pressure rI _psig Test Temp .OF Pressure -_ psig Test Temp .OF

9. Remark Existing SG secondary drain Piminm had to be removed to allow removal of old SG and Installation of the new 2B steam generator. This NIS-2 covers the welding for re-installing this pyplng. Applied Case Code N-41641.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the ru es of the ASME Code, Section Xl. Type Code Symbol Stamp NWA Certificate of Authorization N91N/A Expiration Date NWA Signed / ViEebf_ Date 9Zf, CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision Issued by the Neitional Board of Boiler and Pressure Vessel Inspectors and the State or Providence of CA_ and employed by vlee - CT _ have Inspected the components described In this Owner's Report during the period; fLI3j to l-O and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in aomrdance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. A .0. A t a L innt Cnmmissions UA.k Inspectors SiknAure National Board, State, Providence and Endorsements Date 9-2s-o4 Page 2 of 2

I'. ( FORM NIS-2 OWNER'S REPCt OR REPAIRS OR REPLACEMENTS As Required By The Provis...ns Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet I of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit 1I W2 r3 r Shared (specify Units _

3a. Work Order # 98532820

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM5 WP23522B

4. Identification of System SG Secondary Drain Lines Class 2

5. (a) Applicable Construction Code ASME IlIl NC 1989 Edition N/A Addenda, No Addenda ICode Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replace t Components j Column 1 Column 2 Column 3 C m 4 Column 5 Col. 6 Column 7 j Column 8 National F ASME Code Manufacturer Board Other Year Repanred, Replaced, Stamped (yes Name of Component Name of Manufaturer Serial Number m.r Idenrsca;tion oour r Repiacement or no)

FF Repaired ip-No Hanger/Support 17 Replaced rYes A 2-04A-0-1478A-H5B Duke Power Company N/A NA N/A 1974 r Replacement 17 Repaired rv No Hanger/Support Replaced Yes S 2-04A01478A-H3B Duke Power Company N/AA 974 rReplacement rvRepalred rv No Hanger/Support r Replaced r Yes C 204A-01478A-H2B Duke Power Company N/A N/A N/A 1974 r Replacement 17 RepaIred r1No Hanger/Support Replaced rFYes D 2-04A-0-1478A-H14B Duke Power Company N/A NA N/A 1974 r Replacement iv Repaired 7 No Hanger/Support . Replaced r Yes E 2-04A-0-1478A-H11B DukePower Company N/A A N/A 1974 r Replacement X 17 ~Repaired N Hanger/Support 2-04A-0-1478A-NPS. I- Replaced r Yes F H51 Duke Power Company NA NA N/A 1974 r Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. " 7. Description of Work Remove and replace SG 2B secondary drain lines In support of SG RePlacement. I'

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other Pr Exempt Pressure _ _ psig Test Temp *F Pressure _ _ psig Test Temp _ _ 'F Pressure _ __psig Test Temp °F

9. Remarku Listed hangers were removed for the removal of the 2B SG and rePlaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the ru:'es of the ASME Code, Section Xi. Type Code Symbol Stamp NIA Certificate of Authorization No. A 6&P t SF-DL\op;L Expiration Date N/A Signed ____ ____ __ __ Date Zz. CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel o( Inspectors and the State or Providence of CA _ and employed by t -CT _ have Inspected the components described in this Owner's Report during the period 2-1 to t-6 tr and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employir makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. CnmMqiqinC-, 4k &I A Inspector's SInOiure National Board, State, Providence and Endorsements Date 9-2913-4 Page 2 of 2

r FORM NIS-2 OWNER'S REPC' R )R REPAIRS OR REPLACEMENTS As Required By The Prov. t1 .,sOf The ASME Code Section XI (

1. Owner Duke Power Company Address 525 S. Church Street, Charlotte, NC 28201-1006

                                                                                                                               ----- 1.a Date     05/10104 Sheet    1     of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 r-3 r Shared (specify Units 3a. Work Order# 98537912

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NWA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP 23524A

4. Identification of System SG Vent System Class 2 5.(a)ApplicableConstructionCode ASME ilNC 1989 Edition N/A Addenda, No Addenda ICode Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repared or Replaced -andRe _entCopnents Column 1 Column 2 I Column 3 Column 4 -Column 5 Col. 6 Column 7 Column 8 National SECd Manufacturer Board Other Year Repalred, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number Numtieronl on tf!onti tRiun!t r In or no or F Repaired F No r

A Piping Duke Power Company N/A N/A N/A 1974 rrr Replaced Replacement Repaired r No Yes F ReplacedFYe Replacement B _r rr Repalred Replaced r No F Yes C FrReplacement r Repalred r No FrReplaced FrYes D r Replacernent rRepalred r No r ReplacedFYe E r Replacement FrRepaired FrNo, FrReplac FPF Replacement r Yes Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x II in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Re-Install SG vent pDiing for SG 2A. (

8. Test Conducted: r Hydrostatic r Pneumatic P Nominal Operating Pressure r Other r Exempt Pressure psig Test Temp I OF Pressure _ _ psig Test Temp _ _ OF Pressure: psig Test Temp OF 9.- Remarkt Existing SG-vent olilna had to be removed to allow removal of old SG and Installation of the new 2A steam generator. This NIS-2 covers the welding for re-installing Ithis pipina. Applled Code Casei'N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the niles of the ASME Code, Section Xi. Type Code Symbol Stamp W/A Certificate of Authorization No N/A 5 Expiration Date N/A Signed f Date cTZZ/04 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of M C0 -__ and employed by RS *13 CT have inspected the components described in this Owner's Report during the period .Z:!.-7 to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of anr kind arising from or connected with this inspection. DOLj,4 Commissions NMC M l A) T Date fnspei¶7c ature Nalional Board, State, Providence and Endorsements Date 9 0°V Page 2 of 2

C FORM NIS-2 OWNER'S REPC )R REPAIRS OR REPLACEMENTS As Required By The Provl%.. -as Of The ASME Code Section Xl

--C

1. Owner Duke Power ComPay- 1.a Date 09/22104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F 1 i 2 r3 r Shared (specify Units 3 3a. Work Order # 98537912-

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP23524A

4. Identification of System SG Vent Pipina Installation Class 2

5. (a)Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Rep acement Component _

Column Column 2 Column 3 Column4 Column5 Col. 6 Column 7 Column 8 NationalTS-ME Code N Manufacturer Board Other Year Repalred, Replaced, Stamped (yes Name of Component Name nof anf^-ur Serial Number Number -IdeInVL:o Bu;* or Replacemeni or no 1 Repaired PNo Hanger/Support r Replaced r Yes A 2-57-1481C-H6631 Duke Power Company N/A N/A N/A 1974 r Replacement 1W RepaIred 17 No HangerJSupport rReplaced r Yes B 2-57-1481C-H6632 Duke Power Company N/A N/A N/A 1974 r Replacement rRepalred rv No Hanger/Support F Replaced rYes C 2-50-1481C-H6642 Duke Power Company NWA N/A N/A 2004 17Replacement r Repalred r7 No Hanger/Support r Replaced r Yes D 2-50-1481C-H6646 Duke Power Company N/A N/A N/A 2004 r7 Replacement rRepalred 1r No Hanger/Support r Replaced r Y E 2-50-1481C-H6640 Duke Power Company N/A N/A N/A 2004 17 Replacement r Repalred 17 No Hanger/Support r Replaced r Yes F 2-50-1481C-H6641 Duke Power Company N/A N/A N/A 2004 1 Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 Of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 In.(2) Information in items 1 through E!on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove and replace SG 2A vent lines In support of SO Replacement.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other P Exempt Pressure psig Test Temp . ._F Pressure psig Test Temp OF Pressure psig Test Temp OF

9. Remark: Hangers were removed for the removal of the 2A SG and replaced after Installation of the new replacement steam generator. Several hangers are new.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp NWA Certificate of A orization No. N/A' $5 A sr-LtCb Expiration Date N/A Signed . ) / Date O /7 a'/0 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commisioq issued bythe National Board of Boiler and P essure Vessel Inspectors and the State or Providence of YJI.z__ _-- and employed by 9 S C: have inspected the components described in this Owner's Report during the period .2IE:9 togII I;and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. __ _ ___ ~Commissions _ __tor's Signature National Board,6t ,'Providence and Endorsements V Date 9__3______ Page 2 of 2

r FORM NIS-2 OWNER'S REP' l OR REPAIRS OR REPLACEMENTS As Required By The Prov- . ,ns Of The ASME Code Section Xi 1O-=wner Duke Power Company 1.a Date 09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F1 F 2 r3 r Shared (specify Units 3a. Work Order# 98537912

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date NIA 3b. NSM or MM # ON-23086 AM6 WP23524A

4. Identification of System SG Vent Plolna Installation Class 2

5. (a) Applicable Construction Code ASME IlIl NC 1989 Edition N/A Addenda, No Addenda Cases-N/A

                                                                                                                 /Code (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Replacement Components Column 1 Column 2 Column 3 Column 4 Column 7 Col. 6 Column 7 I Column 8

_ 7 a~onl rAISME Code

                                                       .             Manufacturer        Board             Other          Year Repaired, Replaced,      Stamped (yes Name of Comnonent Name of Manufacturer               -SerialNumber        Number         1dantIcaon        Bu:.:or Replacement                or *MU 17 Repaired            W No Hanger/Support                                                                                                    r  Replaced           r Yes A          2-57-1481C-H6630       Duke Power Company                 N/A              NIA              N/A           1974    r Replacement rv Repaired            rv No Hanger/Support         .                                                                                             Replaced           r   Yes B          2-50-1481C-H6643       Duke Power Company                 N/A              N/A              N/A           1974    r   Replacement F Repaired           PF No Hanger/Support                                                                                                   r   Replaced           r   Yes C          2-50-1481C-H6644       Duke Power Company                 N/A              N/A              N/A           2004    1o Replacement r   Repaired           17 No Hanger/Support                                                                                                   r Replaced -           f Yes D          2-50-1481C-H6645       Duke Power Company                 N/A              N/A              N/A          2004     I Replacement F Repaired            PvNo Hanger/Support                                                                                                   r   Replaced           r Yes E          2-50-1481C-H6639       Duke Power Company                 N/A              N/A              N/A          2004       P Replacement r Repaired               PvNo Hanger/Support                                                                                                   r   Replaced           r   Yes F          2-57-1481A-H6635       Duke Power Company                 N/A              N/A              N/A          2004     1v Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 1I in. (2) Information in items 1 through 6 on this report Isincluded on each sheet, and (3) each sheet is numbered and the numter of sheets is recorded at the top of this form.; -

7. Description of Work Remove and replace SG 2A vent lines In support of SG Replacement.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other F Exempt Pressure _ psig Test Temp OF Pressure psig Test Temp _F Pressure psig Test Temp _F

9. Remark: Hangers were removed for the removal of the 2A SG and replaced after Installation of the new replacement steam generator. Several hangers are new.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No.14 i 2 S ° Expiration Date WA Signed- ,/v-A Date CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of b and employed by N4 c; have inspected the components described In this Owner's Report during the period : to i- OLI ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable inany manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection. P ^ g 9 _ Commissions 2 CIT h--4 lnspecka Signature National Board, State, Providence and Endorsements Date qg ,30' Page 2 of 2

f FORM NIS-2 OWNER'S REPOT OR REPAIRS OR REPLACEMENTS As Required By The Provi. - s O The ASME Code Section Xl

1. Owner Duke Power Company l.a Date 09I22JO4 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I iv 2 r3 F Shared (specify Units 3a. Work Order# 98537912

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp W/A Authorization No. WA Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP23524A

4. Identification of System SG Vent Plilna Installation Class 2

5. (a) Applicable Construction Code ASME IlIl NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. IdAntification of Componontq Rensirnd or Rpnlarkd and RanIar-Lqmant OnmnnnAntS vColumn 1 Column 2 1 Column 3 Column4 Column 5 Col. 6 Column 7 Column 8 National AM oi Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer Serial Number Number Identification Bult or Ren.oame nt or no1 r Repaired r No Hanger/Support F Replaced r Yes A 2-57-1481A-H6636 Duke Power Company N/A N/A N/A 1974 r Replacement P Repaired p No Hanger/Support F Replaced r Yes B 2-57-1481C-H6634 Duke Power Company NIA N/A N/A 1974 r Replacement

                                                                                                                                     . Repaired        Pr No Hanger/Support                                                                                                      r Replaced          r  Yes C          2-57-1481C-H6633       Duke Power Company                 NIA                WA               N/A            2004   1- Replacement rRepalred           P No Hanger/Support                                                                                                      r Replaced          r Yes D          2-50-1481C-H6637       Duke Power Company                  WA                NIA              NIA            2004 17 Replacement r   Repalred         P.No Hanger/Support                                                                                                        F Replaced        r  Yes E          Sk-23086 AM6-035       Duke Power Company                 N/A                NA               N/A            2004       P Replacement r Repalred          17 No Hanger/Support                                                                                                      r Replaced          rYes F          Sk-23086 AM6-057       Duke Power Company                 N/IA               N/A                  A          2004         Replacement Page 1 of 2

Form NIIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information In items 1 through 13on this report is included on each sheet, and (3) each sheet is numbered and the numbgr of sheets Is recorded at the top of this form.

7. Description of Work Remove and replace SG 2A vent lines In support of SG Replacement.

8. Test Conducted: Hydrostatic r- Pneumratic F Nominal Operating Pressure Other 1P Exempt Pressure _ _ psig Test Temp _ _ OF Pressure _ _ psig Test Temp OF Pressure _ _ psig Test Temp ._ F

9. Remark. Hangers were removed for the removal of the 2A SQ and replaced after Installation of the new replacement steam generator. Severa I hangers are new.

(Applicable Manufacturer's Dala Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization-N9IA N S Expiration Date N/A Signed , < , °Date qt i /o X I -- --.---. -.--- .- --- -. - CEH IFICATE OF INbERVICE; INSPECTION 1,the undersigned, holding a valid commision i'Su d by the National Board of Boiler and Pres§ure Vessel Inspectors and the State or Providence of .i .. __ and employed by IBC have inspected the components described in this Owners Report during the peiod to ff-IB s and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. jSO'_Q Commissions kJ S5 3 )Q T Inse~ Signature National Board, State, Providence and Endorsements Date -q-3'0-0 Page 2 of 2

C FORM NIS-2 OWNER'S REPf - nR REPAIRS OR REPLACENMENTS As Required By The Pro% is Of The ASME Code Section Xi il-

1. Owner Duke Power Company 1.a Date 09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet - of

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r1 r3 r Shared (specify Units I 3a. Work Order # 98537912

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP 23524A

4. Identification of System SG Vent System Class 2

5. (a) Applicable Construction Code ASME III NC 1989 Edition N Addenda, No Addenda

                                                                                           ,A                          /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Replacement Components Column 1 Column 2 Column Column 4 Column 5 Cl. 6 Column 7 Column 8 Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Comoonent Name of Manuf__irer Seril Numbe Nu1mbrli rantorno r Repaired F No F Replaced rv Yes A Valve 2FDW-601 Flowserve 80AXS 1189 N/A 2003 rFReplacement r Repaired F No CFReplaced W Yes B Valve 2FDW-604 Flowserve 84AXS 1193 N/A 2003 F7Replacement _____

r Repaired r No FrReplaced Yes C _ _ _ _ _ _ _ _ Replacement _ _ r Repaired r No r Replaced r Yes D _ __ __ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _r Replacem ent r Repalred F No FrReplaced r Ye F _Replacement FPRepaired FNo rReplaced Y-~es F _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _rR eplacem ent Page -_ atf

Form NIIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 112 In.x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Re-Install SG vent piping for SG 2A.

8. Test Conducted: r Hydrostatic r Pneumatic rv Nominal Operating Pressure r Other r Exempt Pressure psig Test Temp.

Pressure _ _ psig Test Temp OF Pressure _ _ psig Test Temp _ OF

9. Remarks Existing SG vent DlolnLa had to be removed to allow removal of old SG and Installation of the new 2A steam generator. Modiflicatlon Involved Installlna new valves.

Applied Code Case N-416-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the files of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A S Expiration Date N/A Signed ' Date_________ CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of -NCm _ and employed by MSBCx have inspected the components described in this Owner's Report during the period 1; to Y a ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concemning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. fninspto? Signature Commissions Wt 3, S S National Board, State, Providence and Endorsements Date !303 9'% Page _ of _

Page 3 of S WP 23524A Valve Traceability Table DPC Stock Code UTC MCN Valve Number Serial No. 538523 1064621 P078-0901 2FDW-601 80AXS 538523 1065255 P078-0904 2FDW-604 84AXS

Aug 31 04 1 1:17a Oconee QPA 864- 885 -400 1 p. 6 FORM NPV-1 N CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVEs'. As Required by the Provisions of the ASME Codeo Section III, Dlv. I h _9_ I Of TMrfIU7CVrW I'mbADATnf.- l6firl C .A..-A C& l0-1-t-h %Trtkn

1. Manufactured by A La . Lfl A v A-A A_ . -- A v- -.-- _ o-a , fla am.8M5

                                                                                                                                            .      t zl          . u                 , .

(Mann asn Mtss of NCr~iaicokHe.

2. Manufactured for DUKE ENERGY CORP CH{ARLO1TE NC 28201 (Nane SAM.s of Pewchas o ownw

3. Location of Installation,. D)UKE ENERGY CORP. OCQtE SENECA SC 29672 ,_

                                                                              -    {~(Iam ana AM sls

4. Pump or Valve Valve Nominal Inlet Size 1 m1/2 Outlet Size I1 "

XW (a) Model No. (b) N Certificate (c) Canadian Series No. Hocders Regisragion (d) Drawing (0 Nat'L (g) Year or Type Serial No. No. No. (e)Class Bd. No. Built (1) 800 GB 80AXSt/ N/A 03-25070-01/0 1 1189 V 2003 (2) 81AXS V/ 1190 V (3) . 82AXSJ> 1 -9 (4) AXS L-2 (5) 84AXS 1193 (6) 85AXS- 1194 (7) 86AXS 11 9 5t7 (8) 800 GB 87AXS ' NWA 03-25070-01 /0 1 1196 2003 (9) (10) 2.

    §. 1I/2" GLOBE VALVE (SM1 desaiptond seri   kr which aquipmrm    was desdgnod) 25070

6. Design Conditions 1425 \ / psi 680 .A'* or Valve Pressure Class 800 ./ (1)

(P-)

7. Cold Working Pressure 1973 psi at 100 'F.

_t Presstrn Retalninn Pbcer Mark No. Material Spec. No. Manufacturer Remarks (a) Cas.t s _.. _ _._ M7908V SA216 GRLWCII FLOWSERVE BODY - H SA479 T316 NOVA L)X1kNET -

                           -H590 .                               A56 T630 1075                      _              NOVA                                     _,______

Q 754-G3oX, SA564 T630 1075 ASKEW U;A!;KET RETAINER (1) For manually operated valves only i 'w Supplementat sheets in form oliUsts, sketches or drawings may be used provided (1) size is s-1r x iV. (2) Informarion I itens 1.2 and 5 o Data Report Is Included on each sheet. and (3)each sheet Isnumbered and number of sheets Isrecorded at top of this form. FP;A. 4A CFS S V (\fj f Z,3 S2.rA0 VALVES 'ZF~hw - (P& &Q _)

Rug 31 04 11:17a Oconee 4R 864-805-4001 p. 7 FORM NPV-1 (Back) Pg.2of 2 Valve S/N JX.SOXS_ through _87AXS_ Mark No. Material Spec. No. Manufacturer Remarks (c) Bolting _

          -(d- O -therParis                       _  _ _ _   _ _ _  _   _  _  _  _ _  _     _ _  _  _  _ _  _ _  _  _   _  _ _

I ( offcae m_ .I S. Hydrostatic test 2975 psi. Disk Dif'ferentil1 test pressure 2171 Ps. CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this pump, or valve. to the ao trction conforms I98 of the ASME Code for Nuclear Power Plant Components. Section III, Div. I.. Edition Addenda NO ,Code Case No. Date Signe d Fowserve Corporation, by Our ASME Certificate of Authorization No. N-1562 to use the N symbol expires 11-26-06 IN) Coate) CERTIFICATION OF DESIGN Design Ifraino leatFO SRECORP Stress analysis report (Class I only) on file at FLOWSERVE CORP Design spec~ficatlons certified by (1) FA B3ENSINGER PE State PA Reg. No. PE-31002-E Stress analysIs certified by IF) RONALD S FARRELL PE State NC Reg. No. 028656 (1) Signature not required. List name only. CERTIFICATE OF SHOP INSPECTION 1.the undersigned. holding a valid commission Issued by the National Board of Bofler and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HSB CT . of Hartford Connecticut have Inspected the pump, or valve, described In this Data Report on JJ.JZ t l..Z lo 3 .. andstate that tothebestof myknowledgeand belief the N Certificate Holder has constructed this pump. or valve, In aicrdance with ASME Code, Section Ill. By signing (his certificate neither the Inspector nor his employer makes any warranty, expressed or Implied. concerning the equipment described in this s Data Report. Furthermore, neither the Inspector nor his employer shall be lable In any manner for any personal Injury er property damage or a loss of any kind arising from or connected with this Inspection. Commkslons A66 V41/A (A Al.- 4) IF (oftliCo ( (Mn fdt.S e, PrMY. WNq) I PjS oF S

FORM NIS-2 OWNER'S REPr v OR REPAIRS OR REPLACEMENTS As Required By The Proaw is Of The ASME Code Section Xl c

1. Owner Duke Power Company l.a Date 09123/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 P12 r3 r, Shared (specify Units 3a. Work Order# 98537914

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON.23086 AM6 WP 23524B1

4. Identification of System SG Vent System Class 2

5. (a)Applicable Construction Code ASME III NC 1989 Edition -/A& Addenda, No Addenda /IgdeCases NA (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Replacement Components Column 1 Column 2 Column 3 Column 4 Column 5 Col.6 Column 7 Column 8

_ME Code Name of Comnonent Name el I.aun,.u9'Ja. I - Manufacturer NiUmhvt Board Nuation or Other Year Repaired, Replaced, StampedCor ASmE (yes dI 1 Repaired P No r Replaced r Yes A Piping Duke Power Company N/A N/A N/A 1974 F Replacement r Repaired r No r Replaced rYes B r Replacement r Repaired I No r Replaced F Yes C r Replacement F Repalred r No r Replaced D r Replacement r Repalred F No r Replaced r Yes

                                                                           .r                                                                Repaired           f- No r   Replaced              Ye F                               .F                                                                                                       Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Re-install SG vent line DiPing for SG 2B.

8. Test Conducted: r Hydrostatic r Pneumatic P Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp OF Pressure _ _ psig Test Temp _ OF Pressure _ _ _psig Test Temp _ _ 'F

9. Remark! Existing SG vent line pnllna had to be removed to allow removal of old SG and Installation of the new 2B steam generator. This NIS-2 covers the welding for re-Installing this plPlng. Appiled Code Cse N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPIUANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp WA Certificate of Authorization No. OA -5;t6-f? \ Expiration Date N/A Signed __________________ Date 07/Z3 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commislon islued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of __t and employed by . S{ 7 have inspected the components described In this Owner's Report during the period 2-7°'t to .J- PyL; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions_ A-), Inspectors Signature National Board, State, Providence and Endorsements Date _ _ _ _ _ _ _ _ Page 2 of 2

C .r FORM NIS-2 OWNER'S REP( _ OR REPAIRS OR REPLACEMENTS As Required By The Prov.. ,ns Of The ASME Code Section Xl I

1. Owner Duke Power Company 1.a Date _09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit ri W2 F3 r Shared (specify Units 3a. Work Order # 98537914

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP23524B

4. Identification of System SG Vent Pioing Installation Class 2

5. (a) Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2 Column 3 Column4 Column 5 Col. 6 Column 7 Column 8 Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name of Component Name of Manufacturer Se-ria! Number NumwrF identification Bullt or Replacement or no)de r Repalred rv No Hanger/Support r Replaced r Yes A 2-50-1480A-H6647 Duke Power Company NIA NWA NWA 2004 ro Replacement FrRepaired R No Hanger/Support FrReplaced r Yes B 2-50-1480A-H6648 Duke Power Comp any N/A N/A WNA 2004 r Replacement r Repalred PF No Hanger/Support r Replaced FY C 2-50-1480A-H6649 Duke Power Company N/A N/A N/A 2004 rv Replacement r Repaired 17 No Hanger/Support r Replaced r Yes D 2-50-1480A-H6650 Duke Power Company N/A N/A N/A _ 2004 r Replacement I Repalred R No Hanger/Support r Replaced r Yes E 2-57-14808-H6619 Duke Power Company N/A N/A N/A 2004 F Replacement r Repalred F No Hanger/Support rReplaced r Yes F 2-57-14808-H6620 Duke Power Company N/A N/A N/A 2004 rv Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove and replace SG 2B vent lines In support of SG Replacement.

8. Test Conducted: F Hydrostatic r Pneumatic r Nominal Operating Pressure r Other P Exempt Pressure _ _ psig Test Temp _ _ OF Pressure _ _ psig Test Temp _ _ 'F Pressure _ _ psig Test Temp OF

9. Remark. Hanaers were removed for the removal of the 2B SG and replaced after Installation of the new replacement steam generator. Note: Several of these hangers are new.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Certificate of Authorization No. NlA 5 E Expiration Date N/A Signed___3__ __ Date D CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commisionjsued by the National Board of Boiler and PVssuE Vessel Inspectors and the State or Providence of AJ( _ and employed by 4 Sfl(IC7 _ have inspected the components described in this Owner's Report during the period A-7ay to g and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss ef any kind aris m or connected with this inspection. zv)~ Co ....... mmissqions-

                                                               . .. _       mc s       _ _, . ,

lislpecto Signature National Board, State, Providence and Endorsements Date 9 ) -- Page 2 of 2

( r FORM NIS-2 OWNER'S REP( ~- 'OR REPAIRS OR REPLACEMENTS As Required By The Provtb..ns Of The ASME Code Section Xl

1. Owner Duke Power Company 1.a Date -09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r I 172 r3 r Shared (specify Units )

3a. Work Order# 98537914

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP23524B

4. Identification of System SG Vent Ploina Installatlon Class 2

5. (a)Applicable Construction Code ASME IlIl NC 1989 Edition N/A Addenda, No Addenda - /Code Cases NA (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repared or Replaced and ensCo onent I Colum n1]

I Colum2 n I Column 3 lColumn 4 National F Column 5 Col. 6 IColumn 7 Column 8 ASAME Code I l Manufacturer Board Other Year Repaired, Replaced, Stamped (yesl Name __ of Component Name_ Mn__a___._____ S a NumbAear Number ident cation Built or Replacement or no) r Repalred r7 No Hanger/Support F Replaced r Yes A SK-23086 AM6-036 Duke Power Company N/A N/A N/A 2004 1RReplacement r Repaired W No Hanger/Support r Replaced r Yes B 2-57.1481A-H6614 Duke Power Company N/A N/A N.A 2004 P Replacement F Repaired 17 No Hanger/Support r Replaced r Yes C 2-57-1481A-H6611 Duke Power Company NA N/A N/A 2004 17 Replacement r Repaired WI No Hanger/Support r Replaced r Yes D 2-57-1481A-H6624 Duke Power Company N/A N/A N/A 2004 PReplacement F Repaired P"No Hanger/Support r Replaced F Yes E 2-57.1481A-H6651 Duke Power Company N/A N/A N/A 2004 17 Replacement r Repaired PNo Hanger/Support r Replaced r Yes F 2-57-1479A-H6612 Duke Power Company N/A N/A NA 2004 7 Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove and replace SG 2B vent lines In support of SG Replacement.

8. Test Conducted:. r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other P Exempt Pressure _ psig Test Temp _ OF Pressure _ _ psig Test Temp OF Pressure _ psig Test Temp OF

9. Remark. Hangers were removed for the removal of the 2B SG and replaced after Installation of the new replacement steam generator. Not>: Several of these hangers are new.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to thi rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Certificate of Authorization No. NI S & 51V' Expiration Date N/A Signed Hi Date 'Y CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commisioq issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of NC and employed by have inspected the components described Inthis Owner's Report during the periocd 25 toluko -tandstatethatto the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descrited in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss ol any kind arising from or connected with this inspection. _ Crnmmiainsn' At )(f, &S3,1ALT

                                                                                - - _,- I_

Inspe or's Signature Ad... v..... National

                                                                     , , Board,       State, Providence and Endorsements Date            -3            /

Page 2 of 2

FORM NIS-2 OWNER'S REPENT FOR REPAIRS OR REPLACEMENTS (k As Required By The Prt ' -as Of The ASME Code Section XI

1. Owner Duke Power Company 1.a Date 08/31/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet - of 5

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 Pr2 rs r Shared (specify Units )

3a. Work Order # 98537914

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AM6 WP 23524B

4. Identification of System SG Vent System Class 2

5. (a) Applicable Construction Code ASME ill NC 1989 Edition N/A Addenda, No Addenda jgode Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components ___

             -       Column 1                  Column 2            l     Column3              Column4              Column5           Col6IColumn7                    Column8l N-O                                                                  ASME Code Manufacturer            Board               Other             Year Repaired, Replaced, Stamped (yes Name of ComponentName of Manufacturer                   Serial Number          Number             Identlflcation       Built 'or Replacement           or no) r Repaired           r No r Replaced           r Y.,

A Valve 2FDW-606 Flowserve 81AXS 1190 N/A 2003 1;7 Replacement F Repaired F No r Replaced WoYes B Valve 2FDW-609 Flowserve 83AXS 1192- N/A 2003 fr Replacements r Repaired r No r Replaced r Yes C r Replacement _r Repaired r No r Replaced r Yes D r- Replacement F Rtepaired r No r Replaced Ye E _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ r__ Replacem ent FrRepaired FrNo FrReplaced r Yes IF - F Replacement Page .jo

                                                                                                                                 - - - I Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size Is 8 1/2 in. x 11 in. (2) Information In items 1 through 6 on this report is included on each sheet, and (3)each sheet Isnumbered and the number of sheets Is recorded at the top of this form.

7. Description of Work Re-install SG vent piping for SGi 26.

8. Test Conducted: r Hydrostatic r Pneumatic P1 Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp___ OF Pressure _ _ psig Test Temp OF Pressure _ psig Test Temp .. OF

9. Remarks Existing SG vent piping had to be removed to allow removal of old SG and Installation of the new 2B steam generator. Modification Involved Installing new valves.

Aeflied Code Case N-416-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No.,WA 5e ft. f Expiration Date NA Signed E &c Date 9 _Z3O'4 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issved by the National Board of Boiler and y Inspectors and the State or Providence of p and employed by - have Inspected the components described in this Owner's Report during the period F;-o to t*I8L: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASIAE Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection. JA Commissions is

A), I lnsipe~o' Signature National Board, State, Prcfvidence and Endorsements Date Cl X I Page Z of ,Ž:

Page 3' of 5 WP 23524B Valve Traceability Table DPC Stock Code UTC M[CN Valve Number Serial No. 538523 1065253 P078-0902 2FDW-606 81AXS 538523 1065254 P078-0903 2FDW-609 83AXS

Rzug 31 04 1 1: 17a Oconee QR 864 -885 -400 1 P. 6

FORM NPV-1 N CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES-AsRequired by the Provistons of the ASME Code, Secion i11, Div. 1 L I-1O__

1. Manufactured by WInWSERVE CORPORAiON. 1900 S.Saunders - t.U Refiuh NC! 276Q3

(- - mWAddms of N Cedi cat.Holde)

2. Manufacdured for DUKE ENERGY CORP CHARLOT NC 28201

_NeO mnd)tsr a( Pgcftsa 4 0MWO

3. Location bf Installatlion WITZMF VPJVrGY CORP. OCrfNtE SEC~r-A SC 296QA72

                                                                       -        wM arm AowuSmJ

4. Pwnp or Valve Valve Nominal Inlet Size I 1/2" Outlet Sizm I n (a) Model No. (b) N Certificate (c) Canadian Series No. Holdees Registration (d) Drawing (M NatL (g) Year or Type Sedal No. No. No. (e) Cass Bd. No. Built (1) 800 GB 80AXS./ NSA 03-25070-0110 1 1189 V 2003 (22 81AXS 9/0 V (3) 82A3*

(4) '--t3A--S *-' -I T92I/ t5) 84AXS v, 1193 (6) 85AXS-*'6 1194 (7) 86AXS v' 1195.$' (8) 800GB 87AXS N/A MA 03-25070-0110 1 1196t,," 2003 (9) (10)

5. 11 2"LOBE VALVE desaiporwi WO~ei CIsegvlcelor ut~kh eukaulpnwWwas dagww4) 25070

6. Design Condtitons 1425 psi 680 'o orValve Pressure Class _ 800

_ 7 (1) (P- sP)

                                          -                                     WA(Tepuah)

7. Cold Wodrlng Pressure 1973 psi at 100 F.

8. Pressure Retaining Pieces __

Mark No. Material Spec. No. Manufacturer Remarks (a)Castings __________ M790ff SA216 GR FAMOWSERVE = BODY - H5SA479 T316 L"0 NOVA LpergNET H590 ,A564 T630 1075 Z ~ NOVA ________ Q17S4-GS6X SA564 T630 1075 ASKEW ASKf.WET RETAINER-

                                     .                     .0                       _.                                S

_w ~ \ e _ .4, (1)For manually operated valves only

   -supptementat sheets in frmnof Usts, sketches ordrawings may be usedprovided(1) sze Isa5-l12xil" (2) lInformation inWrins 1. 2 and 5o~.I Data Repodt Is Included on each sheet. and (3)each sheet Isnumt~ered and number of sheets Is recorded at top of thIs. form.,

UbUU9UUi P.' "UG JL U-t 11:1fa ucoflee U,-, uconee wln Iduat-a8 -400lu1 p. 7 FORM NPV-1 (Back) Pg.2of 2 Valve SIN _OAXS throuch _87AXS Mark No. Material Spec. 14o. Manufacturer Remarks (c) Bothing (d) Other Parts _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

9. Hydrostatic test 2975 psi. Disk Differential test pessure 2171 psi.

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this pump, or valve, to the mies of construction conforms 1986 of the ASME Code for Nuclear. Power Plant Components. Section III, Div. I., Edition Addenda N. Code Case No. NIA Date Signed Flowserve Corporation, by X OurASME Certificate of Authorization No. N-1562 to use the N symbol expires 11-26-06 IN) 11[we) CERTIFICATION OF DESIGN Design Information on filee at FLOWSERVE CORP Stress nayereo (lsIonyonfeatFLOWSERVE CORP Desin er~ed secitatint b (1 FABENSINGER PE State PA Reg. No. PE-31002-E Stress analysis certified by (1) RONALD S FARRELL PE State NC Reg. No. 028656 (1) Signature no required. List name only. CERTIFICATE OF SHOP INSPECTION I,the undersigned, hokding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of North Carolina and employed by HISB CT . of Hartford Connecticut haveinspectedthepumpp.orvalve. describedinthis DatalReportorn It IlJ JD3 .,andstalethattothebestof myknowedgeand bened, the N Cerficate Holder has constructed this pump, or valve, il accordance with ASME Code, Section fit. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or niplied, concerning the equipment described in this s Data Report. Furthermore, neither the Inspector nor his employer shalt be Eable In any manner for ary personal Injury or property damage or a loss of any kind arising from or connected with this Inspection. Dated 7 '1- o in.j3.., rpi A V - - -.- . - - -A,

                                                                        - -      rnnn~m IA a

ll: AN -T i- Al"'6 -Z

                                 -7  9  -bdf I                                                        (Ran Sd.,S1W. Pt&. WgP (Wp 232IS                         V    SeJ

C- FORM NIS-2 OWNER'S REPr 1. OR REPAIRS OR REPLACEMENTS As Required By The Prov ns Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F1 P72 r3 r Shared (specify Units 3a. Work Order # 98541036

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NWA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON4-23086 = 0110d"'

4. Identification of System Chemical Addition System Class 2

5. (a) Applicable Construction Code ASME II1NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Column 8 I

                                                                               -         National                                                            ASME    Code Manufacturer         Board              Other            Year Repaired, Replaced, Stamped (yes NmofCmoetName of Manufacturpr                  Srlal Number         Number          I'de...tifiatiu      Buiit or Replacement               or no) r    Repaired          17 No
                                                                                                                                         - Replaced          rr  Yes A                Piping           Duke Power Company                 N/A               N/A                N/A            2004    1;7Replacement r    Repalred          r   No r   Replaced          r   Yes S                                                                                                                                r Replacement r    Repalred          r   No r   Replaced          r   Yes C                                                                                                                                   F-Replacement r Repalred             r   No r Replaced            rYes D                                                                                                                                   F Replacement rRepalred              r-No I-Replaced            r Yes lE                                                                                                                              rReplacement rRepalred              r  No I Replaced            r   Yes F                                                                                                                               rReplacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size Is 8 1/2 in. x 11 in. (2) Information in items 1 through S on this report is Included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install new Chemical Addition flow palh for both Unit 2 SGs..

8. Test Conducted: r Hydrostatic r Pneumatic F Nominal Operating Pressure r Other r Exempt Pressure _ _ psig Test Temp OF Pressure _ psig Test Temp _ _

0F Pressure _ psig Test Temp 2 OF

9. Remark. SGRH Project added this mod per ONS request to add an addition method of adding chemicals to the Unit 2 SGs.. This NIS-2 covers the weldina for Installation of this pioing. Applied Code Case N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A So2 Expiration Date N/A Signed ; Date CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the National Board of Boiler and Pres Vessel Inspectors and the State or Providence of _ and employed by M S u50Tr have inspected the components described in this Owner's Report during the period ; to ; andstatethat to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Cocle, Section Xl.. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions t 1 YS3t A. Ins rector's Signature National Board, State, Providence and Endorsements Date 0 M I IPage 2 of 2

C( FORM NIS-2 OWNER'S REP r NOR REPAIRS OR REPLACEMENTS As Required By The Pros. .ens Of The ASME Code Section Xl

1. Owner Duke Power Company 1.a Date 09123/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet of

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 17 2 r 3 r Shared (specify Units 3a. Work Order # 98541036

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 BM3 WP 23527

4. Identification of System Chemical I - - -

Addition Svstem,_ Class 2

5. (a)Applicable Construction Code ASME ill NC 1989 Edition N/A Addenda, No Addenda iCode CasesIN/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Rep acement Components Column 1 Column 2 Column 3 Column 4 Column 5 l Col. 6 {Column 7 Column 8 National I i Cd Manufacturer Board Other Year RepaIred, Replaced, Stamped.(es Name of compuwentc Ni.... ' oanu-aclurer Serial Number Identification Built or Replacement or no) rRepaired rNo r N rReplaced 117 Yes A Valve 2FDW-594 Flowserve 84AXJ 1149 N/A 2003 W Replacement

                                                                                                                                       . Repaired        r No r   Replaced       Po Yes B           Valve 2FDW-595              BNL Industrial             A981103-4-14           N/A               N/A           2003    ro Replacement r Repalred          r   No r   Replaced       r   Yes C                                                                                                                                 r Replacement r Repalred          r   No r   Replaced       r   Yes D                                                                                                                                  r Replacement r   Repalred        r   No r  Replaced        r   Yes E                                                                                                                                 rF Replacement r Repaired          r   No r   Replaced        r   Yes F                                                                                                                                 r Replacement Page__ of_

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 In. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Install new Chemical Addition flow lath for SGs 2A & 2B.

8. Test Conducted: -r Hydrostatic r Pneumatic li Nominal Operating Pressure r Other r Exempt Pressure psig Test Temp. OF Pressure psig Test Temp __ OF Pressure psig Test Temp 'F

9. Remarka The BM3 mod Included adding a new alternate method to add chemicals to the steam generators.

The modification Involved Installing new valves. Appled Code Case N-41 6-1. (Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A .5 R S tfbP Expiration Date N/A Signed Z J Date

                                                                            .. /

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the National Board of Boiler and Pree sel Inspectors and the State or Providence of JK el._ and employed by 4hea r have inspected the components described in this Owner's Report during the period ii to S AL; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a less of any kind arising from or connected with this Inspection. Commissions

                                                                                        , A)3AI Irnspr r's Signature                                       National Board, State, Pro'vidence and Endorsements Date      9-30             V Page _ of _

Page.-3 of 7 WP 23527 Valve Traceability Table DPC Stock Code UTC M[CN Valve Number Serial No.

                                                         .I 461336          1061349        P098-0905  2FDW-594          84ALXJ 453842          1061603        P107-0894   2FDW-595      A981103-4-14

664-865-4001 P. 2 Aug31 04 Rue 04 11: 11:16a16a Oconee QA Oconee QR 864-885-4001 p. 2 A ilJ.J30a3t. r L1.W^Wr_ rI.AL Ob

CERTIFICATE HOLDERS' DATA REIPORT FOR NUCLEAR PUMPS OR VALVES' CORRECT0 COPY As Required by the Provisions oa the ASME Code. Section IUL Div. 1 Pg. I of. 2 Manufactured by VLOWSERVE CORPORA1TION. 1900 S. Ssunders St., Raleirh. NC 27603 i-

                                                                    -Nre  andi Aidri at N cw@Octe NMiM)

2. Manufactured tor DtUK ENERCGY CORP CHAILOTTE NC 28201 (maim LandMdi or PDu;Oafarcr o nSC2

3. Location of Installation DUKE ENERGY CORP. OCONJ 1 SEnZCA SC 29672 L.- _ .

(N-' WN AddC

4. Pump or ValW Valve Nominal IlretSize I 1 2 - OutletSize 1 1/ -

(ca.) prC:t' (a) Model No. (b) N Certificate (c)Canadian Series No. Holder's Regestraion (d) Draw'ng (ft Narl. (g)Year or Type Serial No. No. No. (e) Class 13d. No. Built (1) 1S78#SC 84AXJ ' NIA 03-25064-011 A 1 1149 = 003 (2) (3) (4) (7) (8) (9) (10).. _ I 1 /2" SWING CHECK VALVE pdat dewpfianr ,serwice was des;gned) for Wih ,KuInbeftnh 25064

6. Design CondItions 345 psi 680 L F or Valve Pressure Class 1878 (1)

(Pc°5=C) eremperatuc) 1 t

7. Cold Wording Pressure 4637 ps a 100 OF.

8. Pressure Retaining Pieces __*

Mark No. Materlal Spec. No. Manufacturer Remarks (l Castings _ M2777 SA216 GR WCB '- TECH CAST BODY 1G3875 SA.479 T 316 -- COLONIAL BONNET Y-F5D5 *7 SA564 T 630 1075 i,- NOVA DISC 72240 s- A479 T316 is.- DUB OSE BONNET RETAJNER lG87 T,31 _ COt)IA SA.7 1r3) (1) For manually opeaed valves only

 'SupplermentalsheetsIn frm of sts skcetches or drawrings triy be use4 provided (1)size is 8-li? ix I' (2) infotmatlon Is ke~ms                        2 and       Asthis Data Report is Included on each sheet, and (3) each sheet Is numbered arid nurnber of sheets Is recorded at top of hils fcerm.

(-e 23SZ-7, V.tLvES -

Aug 31 04 11:16a Oconee QR 864-665-4001 p.3

                                              /9198313376                                     FLOWSERVE                                                     PAGE     07
                           ,1dNPV-1          (Back)                                                                                           Pg.2of 2 Valve SIN         3413 tFhrough _

I I _ mark No. Material Spec. No. MAanufacbrer Remarks (c) Boating -_.___._ (d) Other Parts _ _ _ S.~~ 695., ihDffrnilts resr 11 P, _yrsalts

          .t CERTIFICATE. OF COMPLIANCE We ceslfy that the statements made In Ui5a report are correct and that this pump, or valve,                                      to the rulen of construction confonns                                                                                                                                      1986 L of the ASME           Code for        Nudear Power Plant Components.              Section il. Dlv. t..             Edition 41 Addenda                     NO                 , Code Case No.               N/A                  .          D2to Signed               Flowserve Corporation.                       by (N CLr-mIle IUdeQ Our ASME Certiicate of Authoriaton No.                   N-1S62              to use the                        symbol expires                  11-26-03     ;

IN, 1n~. CERTIFICATION OF DESIGN Desin Informafn on fie at FLOWSERVE CORP eI5analysis report (Cass 1only) on fie at FLOWS1RVF CORP I Oesign specitlcafons ffed by (1) F A D8ENSYNZ ER PE Stake PA Reg. No, fl-31002-E Stress analysIs certified by (1) RiONALD S FARRELL PE Slate NC Reg. NM 02S656 (1) Signakure not required. tst narne only. CERTIFICATE OF SHOP INSPECTION 1.the undersigned, hbldhig a valid commission Issued by the National Board of Boiler end Pressure Vessel inspectors and the Slate or Prtince of North Carolina and employed by _4. HSES CT - of Hartfcord Connecticut have Inspected the pump. or valve, described inthis Data Report on _f tJ Z joy and state that, to The best of my knowledge snd belief, the N Cerfificzte Floder has constructed thk pump. orvlve, h accordance wathASltE Code. Secton Ill. By signing tIis cerlificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the equlipment described In this. Data ReporL Furthermore neiter thenspeclornorhis emplyershall belable Inanymanner frwypersonal iurnyor propeydamage ora lost of eny kind arising torn or connected with this Inspection. Date I 1A Signed

                 -,           ,                          "or &1   /co                       loSf/

WAnssln I, C -scm PWof. 5O:tPF-. sntNo.) PpPJL 5 oF 7 (viP z35z?, Vqwlajr ZFIW- St- S'tS

Rue 31 04 11:16a Oconee QR 84E 5 001 p. 4 864-685-40 FORM NPv-1 CERTIFICATE HOLDERS' DATA REPORT FOR As Requlned by the Provisions ol' the ASME Code, NUCLEAR Section 111. PUMPS OR VALVI.^S Division I Pg. 11of 2

1. Manuacbturdnd ldby BNL INDUSTRIE';, INC., 30 INDUSTRIAL PARX ROAD, VERm;ON, CT, 06066 nM end Vddra of NCertfit Helddd

2. MasnulscUredfor DURE POWER CO, PO BOX 1015, C-CARLOTTE, RC 28201-1015 lwna and ddreus of Pwihter)

3. LocationointatiationV15C NUCLUR STATION, HIGHWAY 183, SENECA, SC 29678 (name and eddregal

4. Model No., Seres No., arType -Dr& VALVE - HBV-A2-20-0036 0 Rev. ~ CR N-

5. ASME Code. Secion Hlt,Dfivison 1: i989 2 Lt-ledtoni lddendeladl Ileel nICU Case r.1

6. PFmp or vlve- PLVE NorInalinlet sa. Z.4.1p_ Ouetb , 2; 7_oyS0 _SA1OS SA 479 TY316 eo*tig SA193GrB7/SA194Gr2H (aI1 I Cr) id) (a)

Cert. NMI Body Holder-s Bonnet Dil.d Board Serial Serial Serici Seribl No. No. No. No. No. C-A981103-4-R Qga 281103-4 -(16) ;? _ _ _ _ N56 N3

                                                                                 -'       _2            5

_I _ . _

        %*Spplramstel hIforatdon hI ferrtat gets. Akschden   ar *Swlngemay be ued provided (1 sunis BY&x 11.

on tl Data Report k kuded on each 1eee,31 each she 121htformetlan hiItna 1 numered Is end numatf shet*a recorded at rhtop of ate form. duouqh4 wdtha (121881 TbI4 km CE00037 may ba ebtained from de Order Oqt.. ASME, 22 Lw Drive. Box 2300. Fad ed. NJ 07007-2300. (V,> C SF *7 QWP Z35Z-7 d Vq-t-\eS ZE-S" 4: S4155

                      -6                                                                                                                                 5 4-885-4001                                p.

Aug 31 04 11:16a Oconee QR 86 V FORM NPV-1 [Back - Pg. 20fof CerUtUct a Holdoes Sarl NP. A92813 03 (13THRUI 6) L Design conditlor psi - *F or valve preasure class ANSr *300 11 (pr"essev tu"q MIrl

t. Cold workng pressure 740 psi at 104OF 820

10. Hydrostatic teat 112 pal DiPk dilkerertIat ltt pressur- - pdO

11. nmems:_

CERTWICA1ION OF DESIGN Design Speclielaln certifled by J. M. GWINN P.E.tate MA ne.no. 27 L51 Design Pport cortilbed y P.E. State RAg. no. _ CERTIFICAlIE OF COMPUANCE We certify that the statements made In this report ere correst and tht thi puMp or valve confomS to the mles for comstrcton of ft ASME Code. 6efton UtIDivision 1. NCertificateofAuthoristlonNo N-2882 11/10/04

              --     08 /21/03 r

BNL INDUSTRIES, INC. IU~ (N Catrficate HNode Signed / CMERCAXTE OF INSffCTION I the undearsed, holding a valld commission issued by the Nationl Boad of Bdollr and Pressure Vessel Iasieci and th Stare or Province ot CONN. and mplyed by ONEBEACON AMERICA INS _ of BOSTON, MASS have Inspected th pump, or valve. described hi this Date Report on 08/21/03 and stats trat to the best of my knowledge and belief, the Caetilleate Holder tes con-structad this pump, orvalve, In acordance with the ASME Code, Section liU,DivisIon 1. By signing this certificate, neither te Inspector nor his eamployer makes soy warranty, expressed or impied, concenit the component described In this Date Report. Furthermo. net*wr the Inspector nor his employer shall be Iable In any marner for any personal kjury or property damage realoss of kind arsing from or connected with hIs inspection. Da t aKeli. 5 gned

                                                /A.arl.          t.d Gniaelons        iV/
                                                                                               /VW WWI.

7 7ndLnrwaentalM l.M A't C 7 %'(C.t ndate orpo. rnd ml ll) For menually operated valves only. (Cwp zssza Vi-iT'Sc. t.FIW- SPI t S)

kr FORM NiS-2 OWNER'S REPrt- OR REPAIRS OR REPLACEMENTS It As Required By The Prov. 'as Of The ASME Code Section XI

1. Owner Duke Power Company 1.a Date 09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet I of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F1 P2 r 3 r Shared (specify Units 3a. Work Order # 98621223 .

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 BM4 WP 235355

4. Identification of System Miscellaneous Mechanical Interferences Class 3

5. (a) Applicable Construction Code ASME III NC 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identific~ation of Comoonants Ranalred or RAnlacAd and Raniaramant Crnmnnnant-q Column 1 Column 2 Column 3 Column 4 Column 5S Col. 6 Column 7 Column 8 NatinalI ]ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes

                   .ame       ofu of Com.pnent       hI-1is  ManuI maiiuuwrer       seri .Umuera        Number          identification     Built  or Replacement              or no)

F Repaired o No r Replaced r Yes A P1ping Duke Power Company N/A N/A N/A 1974 - Replacement r Repaired r No rReplaced r Yes B -r Replacement r Repaired r.No rReplaced r Yes, c r Replacement r Repaired I-No r Replaced r Yes D r Replacement r Repalred r No r Replaced r Yes E r Replacement r Repaired 1 No r Replaced r Yes F r Replacement Page 1 of 2

Form NIS-2 (Back) Page 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 81)2 in. x 11 in. (2) Information in items 1 through 3 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. DescriptIon of Work -Remove and re-Install Miscellaneous Mechanical Interferences (

8. Test Conducted: r Hydrostatic r Pneumatic W Nominal Operating Pressure rOther J Exempt Pressure _ _ psig Test Temp _ OF Pressure psig Test Temp . F Pressure _ psig Test Temp __ OF

9. Remarki Existing Miscellaneous Mechanical Interferences had to be removed to allow removal of old SG and Installation of the new 2B steam generator. This NIS-2 covers the welding for re-installing any piping associated with this mod. Applled Case Code N-416-1.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No N se *o Expiration Date N/A Signed 6'L(P Date Z7 / ( CERTIFICATE OF INSERVICE. INSPECTION I, the undersigned, holding a valid commision is ued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of _1_ and employed by J ' S CT have inspected the components described in this Owner's Report during the period o-4Y-0`) to - and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

       )k     QDL.          .                    Commissions             tS3 > 3i, f ]T 61;ects Signature                                        National Board, State, Providence and Endorsements Date   ..- 310- 0 5 Page 2 of 2

C FORM NIS-2 OWNER'S REPC f R REPAIRS OR REPLACEMENTS 47T As Required By The Provo .,is Of The ASME Code Section Xl

1. Owner Duke Power Company la Date _0923I04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a, Unit r 1 1o2 r3 Shared (specify Units )

3a. Work Order # .98621223

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. WA Expiration Date N/A 3b. NSM or MM # ON-23086 BM4 WP23535B

4. Identification of System Misc. Mechanical Interferences Class 3

5. (a) Applicable Construction Code ASME ill ND 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2 Column3 column 4 Column 5 Col. 6 Column 7 Column 8 l ~~~~Natinl SECd l Manufacturer Board Other Year Repaired, Replaced, Stamped (yes

                    .Name of Car-n-e     I    .NaeO" umbanufaCu.iuer       eru.a:  .auuIr         Number          uidenifealuln      Buifi  or Repiacemeni           or no)

P Repaired P No Hanger/Support r Replaced rYes A 2-57-0-1481A-H21 Duke Power Company. WA N/A N/A 1974 r Replacement

                                                                                                                                         .v RepaIred         rv No Hanger/Support                                                                                                         rReplaced           r   Yes B          2-57-0-1481A-H22       Duke Power Company                     N/A               N/A               N/A            1974    r   Replacement iP Repaired         v No Hanger/Support                                                                                                         r   Replaced        r   Yes C          2-57-0-1481A-H20       Duke Power Company                     N/A               N/A               N/A            1974    r   Replacement P Repaired          r No Hanger/Support                                                                                                         r   Replaced        r   Yes D           2-57-01481A-H23        Duke Power Company                     NWA               N/A               WA_1974

_ _ Replacement rvoRepaired rv No Hanger/Support r Replaced r Yes E 2-57-0-1481A-H19 Duke Power Company WA N/A NIA 1974 r Replacement PvRepaired P No Hanger/Support F Replaced r Yes F 2-57-0-1481A-H6 Duke Power Company NWA N/A N/A 1974 F Replacement

                                        -                                                                                                                   Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Remove/renlace SG 2B misc. mech. Interferences In support of SG Replacement.

8. Test Conducted: r Hydrostatic F Pneumatic r Nominal Operating Pressure r Other iv Exempt Pressure psig Test Temp OF Pressure psig Test Temp OF Pressure psig Test Temp _ _ OF

5. (a) Applicable Construction Code ASME IlIl ND 1989 Edition WA Addenda, No Addenda -/ode Case!

9. Remark. Hangers were removed for the removal of the 2B SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp WA Certificate of Authorization No. MIA :5 &R-k-k Expiration Date N/A Signed 7 ? Date '//3c./ i; PCERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commisionrsgied by the National Board of Boiler and Pr ssure Vessel Inspectors and the State or Providence of 4J (aand employed by Z2 Q have inspected the components described in this Owner's Report during the period . togI79q; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ __Commissions Me3 , 5*, X, inspectols SignatureC National Board, State, Providence and Endorsements Date q Page 2 of 2

FORM NIS-2 OWNER'S REPr Gi 'OR REPAIRS OR REPLACEMENTS As Required By The Prosv ns Of The ASME Code Section Xi I-0

1. Owner Duke Power Company 1.a Date _09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 iv 2 r3 r Shared (specify Units 3a. Work Order # 98621223

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 BM4 WP23535B

4. Identification of System Mlsc. Mechanical Interferences Class 3

5. (a) Applicable Construction Code ASME IlIl ND 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1I l Column 2 [ Column 3 ] n Column C75 lIn Col. 6 Mu 3 Column 8 National ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Namel Colimin o Name ui Manulauiurer 0euia1 I-umbeIM N umb,1EdIULI IUr BUIII~duII Dulll we wiae; lorw 1v Repaired Wo No Hanger/Support r Replaced r Yes A 2-57-0-1481A-H7 Duke Power Company N/A N/A N/A 1974 r Replacement iv Repaired iv No Hanger/Support r Replaced F Yes B 2-574-1481A-H9 Duke Power Company N/A N/A N/A 1974 r Replacement iv Repaired 1v No Hanger/Support I Replaced r Yes C 2-57-0-1481A-H1O Duke Power Company N/A N/A N/A 1974 r Replacement iv Repaired Wo No Hanger/Support r Replaced r Yes D 2-57-0-1481A-H17 Duke Power Company N/A N/A N/A 1974 r Replacement iv Repaired Wo No Hanger/Support . Replaced r Yes E 2-57-0-1481A-H25 Duke Power Company N/A A N/A 1974 r Replacement We Repaired P No Hanger/Support r Replaced r Yes F 2-57-0-1481A-H15 Duke Power Company N/A N/A N/A 1974 r Replacement Page 1 of 2

Form N1IS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets Is recorded at the top of . - this form.

7. Description of Work Remove/rePlace SG 2B misc. mech. Interferences In support of SG RePlacement.

8. Test Conducted: r Hydrostatic F Pneumatic r Nominal Operating Pressure r Other W Exempt Pressure _ _ psig Test Temp _ F Pressure _ _ psig Test Temp OF Pressure psig Test Temp OF

9. Remark: Hangers were removed for the removal of the 213 SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp NWA Certificate of Authorization No. 15(,pv Svss,&o, Expiration Date KUA Signed A / 5 Date 9 3 /Osf CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commisi on issed by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of ___ and employed by lEC have inspected the components described in this Owner's Report during the period.2-a Y to J>^ , and state that to the best of my knowledge-and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Cnmmissinns 2L ST 9 A) Z-InspeI s Signature National Board, Statee, Providence and Endorsements Date 0 Page 2 of 2

lr FORM NIS-2 OWNER'S REPr k OR REPAIRS OR REPLACEMENTS As Required By The Pros as Of The ASME Code Section Xi

1. Owner - Duke Power Company 1.a Date -0923104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 W 2 r3 Shared (specify Units _

3a. Work Order # 98621223

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp WA Authorization No. N/A Expiration Date WA 3b. NSM or MM # ON-23086 BM4 WP23535B

4. Identification of System Misc. Mechanical Interferences Class 3

5. (a) Applicable Construction Code ASME III ND 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 l Column 2 r Column 3 Column 4 Column 5 Col. 6 Column7 Column National ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes rv Repaired r No Hanger/Support r Replaced r Yes A 2-57-0-1481A-H14 Duke Power Company N/A N/A N/A 1974 r Replacement i Repaired F No Hanger/Support r Replaced r Yes B 2-57-0-1481A-H16 Duke Power Company N/A WA NI_1974 r Replacement FvRepaired F No Hanger/Support r Replaced r Yes C 2-57-0-1481A-H11 Duke Power Company N/A WA WA 1974 r Replacement FvRepaired 17 No Hanger/Support 1 Replaced r Ye D 2-57-0-1481A-H12 Duke Power Company N/A N/A N/A1974 r Replacement F Repaired FvNo Hanger/Support . Replaced r Yes E 2-57-0-1481A-H13 Duke Power Company N/A N/A N/A 1974 r Replacement F Repaired F;No Hanger/Support r Replacedmens F 2-57-0-14S1A-H26 Duke Power Company WA WA N/A 1974 Replacement

                                        -                          _ _  _ _ _  _ _ _ _ _ _ _ _ _ _ _   _ _ _ _                         -P                        a ge 1 of 2

Form INIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of.- this form. (

7. Description of Work Remove/reelace SG 2B misc. mech. Interferences In support of SG Replacement.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other 17 Exempt Pressure _ _ psig Test Temp _ OF Pressure _ _ psig Test Temp _ _ OF Pressure _ _psig Test Temp .F

9. Remark: Hangers were removed for the removal of the 213 SG and replaced after Installation

              -8 WI
                  &16- --..

LJOU IIVW IFZ MUCIII0116 OLOCIII WaVICIO&WI. - (Applicable Manufacturers Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp NIA Certificate of Authorization Nq6.A Expiration Date N/A Signed ' Date CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commisioQ i.s ed by the National Board of Boiler and Pr ssure Vessel Inspectors and the State or Providence of - ____ and employed by 5 S CX have Inspected the components described in this Owner's Report during the period a 3l b to ; and state that to the best of my knowledge and telief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Ownerst Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisino oroconnected with this Inspection.

                  \                      0   _      ~~~Co~m~missionns     /)Jd3                 ^

lifir;6tor-A Signature National Board, Stat', Prov'idence and Endorsement:s Date !Wo Page 2 of 2

FORM NIS-2 OWNER'S REP' 'OR REPAIRS OR REPLACEMENTS o-As Required By The Prov. .ns Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 6114104 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 W2 r3 r Shared (specify Units 3a. Work Order # 98621223

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. N/A Expiration Date NIA 3b. NSM or MM # ON-23086 BM4 WP23535B

4. Identification of System Misc. Mechanical Interferences Class 3

5. (a) Applicable Construction Code ASME IlIl ND 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replceent Components _____ _______

Column 1 Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 7 Column 8 National ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes Name nf (penmnnnnt

                                ~ria!Noma u                         Se Number Iila  N M1,mhma.
                                                                                                                                 !e!ationa1A MMa.II .
                                                                                                                                                                    -aI CoeO rv Repaired            17 No Hanger/Support                                                                                                         r Replaced            r   Yes A          2-57-0-1481A-H18       Duke Power Company                  WA                  N/A                N/A          1974     I Replacement W-Repaired              P' No Hanger/Support                                                                                                           F Replaced          r   Yes B            2-57-0-1481A-H5      Duke Power Company                  NA                  WNA                NWA          1974     r    Replacement r Repalred             r No r Replaced            r Yes C                                                                                                                                  rReplacement r Repalred             r   No r   Replaced          r   Yes D                                                                                                                                  r    Replacement rRepaired              r No rReplaced             r Yes E                                                                                                                                  rReplacement r-Repaired           rNo rReplaced              r   Yes F                                                                                                                                  r    Replacement Page 1 of 2

Form NIS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of. - this form.

7. Description of Work Removelreplace SG 2B mIsc. mech. Interferences In support of SG Replacement.

8. Test Conducted: r Hydrostatic F Pneumatic F Nominal Operating Pressure r Other P Exempt Pressure _ _ psig Test Temp .OF Pressure psig Test Temp 'F Pressure psig Test Temp OF

9. Remark. _Hanners were removed for the removal of the 2E1SG and replaced after Installation of the new replacement steam generator.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp NWA Certificate of Authorization No. N/A sLa&zgA FkS4L Expiration Date NA Signed __ Date________ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision iFsued by the National Board of Boiler a dPr u essel Inspectors and the State or Providence of JC and employed byy have inspected the components described in this Owner's Re¶,6rt during the period totf37L; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Ccde, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions , , 1 , 53, A, ._ Datneptvr's Signature National Board, State, Providence and Endorsements Date i-°D Page 2 of 2

FORM NIS-2 OWNER'S REpr 7 0R REPAIRS OR REPLACEMENTS As Required By The Pros Iv s Of The ASME Code Section Xl t

1. owner Duue Power Company .La- -- __ -In.

Liate Vw14131 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 4

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 W2 r 3 r Shared (specify Units 3a. Work Order # WO 98648846/98540919 (Tend. Removal/Reolt)

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NWA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AS9 WP 21551 (Tendon Removal) WP 23551 (Tendon Renlacement)

4. Identification of System Reactor Containment Class CC

5. (a)Applicable Construction Code ASME ill Div. 2 1992 Edition N/A Addenda, 1992 /Code Cases N/A (b)Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class Mc and cc and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column 1 Column 2

_t Column 3 Column 4 Column 5 Col. 6 Column 7 j Column 8 riINational iuuuaur . ASME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes NaE o u ~ oa;maNumb

                                                                                                  ,e ,: e Nrm T                                                                I ode Mnui unk:o lcmn,no

o See Attached rRplo vN Tabie A For rPplrdr No Affected Tendon 1v Replaced r Yes A Tendons Duke Power Company Number NIA N/A 1974 F Replacement see AttacnaRepalred Table B For- No Prea~e Affected Tendon F Replaced r Yes B Tendons Duke Power Company Number N/A N/A 2004 P Replacement r Repaired F No r Replaced r Yes C . r Replacement

_r Repaired r No r Replaced r Yes D _r Replacement r Repaired r No r Replaced r Yes E _ _ Replacement r Repaired r No r Replaced r Yes F r Replacement Page 1 of 2

Form 1NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of --- this form.

7. Description of Work Removal/replacement of tendons for constructIon opening.

8. Test Conducted: r Hydrostatic r Pneumatic F Nominal Operating Pressure r Other 1FExempt Pressure ; psig Test Temp _ F Pressure psig Test Temp OF Pressure psig Test Temp °F

9. Remarki Selected tendons were removed for Installation cf construction opening. Closure of construction opening required tendon replacement. Table A lists tendons that were removed and Table B documents final configuration of Installed tendons per this modification.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Certificate of Authorization N,: NIA SEs:&Szmb Expiration Date N/A Signed r Date cZ 3/O'f CLET IICUATIt UOF INZSERVIU INSPEU IIUN 1,the undersigned, holding a valid commision issed by the National Board of Boiler and Pros ure Vessel Inspectors and the State or Providence of AJLQ__ and employed by 1 have inspected the components described in this Owner's Report during the period elf3099 to 2 E and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisn from or connected with this inspection. aCommissions VCL JS3 A) 227 National Board, State, Providence and Endorsements Inspec`c~s Signature Date 930Y I Page 2 of 4

I Ar-ONS 2 TENDON' MOVED I DURING 2EOC20 ePower Comoany I IIaDI I I I-- 2If4 1 I I. ta nP22/04 I _i a hilr-h C- S

1. E', -s

       . I I    I_                _

_ I I I I I I

2. Plant Oconee Nuclear Station I I II I Addres 780 Rochester Hwy. Senec , S.C. 29672 _ =

I , __I I _ 3a. Work OrderWO 9864 8846!18409198 ren L e w l[eon

3. Work Performed By Duke Power Comnpany IRepair Oranization Job #

Address 526S. Church StCharlot eNC 2820 1006 II I I i Type Code Symo IStam NiA Authorization No. NA 3b. NSM or MM # ON-23086 AS9 WP 21551 (Tendon R I I I I I I11WP 23551 (Tend~on Reoloacemen

4. Identificaton of System Reactor nt~lnvmet Class S. (a) Applicable Construction Code ASME III Div. 2 19.Edition N/A Addenda,1 Jod CasesWA .

(b) Apooicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 thrwugh 1992 Addenda for Class MC and cc and their supports.) I 1 ,

6. Identification of Compents Repaired or Replaced and Replacement Components

TABLE B £ 5;mr JDuke Power Compiyn T Addr.e 5 ONS 2 TENDONS P 'ACED DURING 2EOC20 A"SW -uw7N04 r it Ithre.h SheeLUCOhavMfrq.NCH2S2f0i.1-% I I I I I_ Siheet 4 of 4 2.Plant Ocnee Nudeer Stion I_ Addre 7800 Roctehr Senec, S.C. 29672 2a. Unit I _ I I 9 end = I I - 3a. Work Order# WO 9i68846S540919 ITend Ie vaVReit)

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Silte Charlott NC 28201-100 T Code bol Stamp WA Auhorlzation No. NA3b. NSM or MM # i i i

                                                                                             -23086 AS9 WP 21551 tend _          movf iT       I                                                            I IWP2355lAfend_ReoIe
  . Identt              _emRorContalnmtent Class _CC                               11 5.(a)ApplicableConstonCodeASMEIIIDlv.2 1992 Edilon NWA Addenda,19                                                         /Co (b) Applicable Edition of Section Xl Utilized for Repairs or Replacerents 1989, No Addend(992 through 1992 Addenda for Class MC and co aThei           24888 IW71              2                _      I             45      I                7

_2 5: B.Ident~ifiation of ComPortents Repaired or Repbaced adRepiacemen Coponents l Tendon MGM ho emtiX Fiel Head Wire Tendon HetShop Head: ~ Fhied Head Wire Number Cohide uis Code Had Numiber Heat No. Number Co e t Numberod it Numnber itM No.

                =           2     .                                                      42H46 TX16              183746               237486 1WO 42H47                  t374t 1X2.        XZ       t374S 1

421-14 1 13748 13724 3 2 = _ _ 421149 Tx16 13748 TW2 24685 X62035 X663 23V29 TWs5 248 TW7 24685 XW05 42Hs5 TX1771 13746 TW62 24685 X68Os3 23V30 TW26 24885 TW73 24885 . _7_ 42H-t 17 13748 TW10 24885 x6e0m3 34Vt TW43 2246s 421-152 TX187 13746 TW4 124685 xe6s3 3V Ts3 265 TW79 24685 . 2s3r1 81 1S74U TW61 24685 x~em0 34V3 TW3v 24685 TW25 24885 X66tJ1t 42HU5 TX11 13746 TWB 248t3 X66053 34V4 13748 TW41 24885 42-158 X1 13746 TW71 24685 X60W3 L34V5 ITW421 24685 HTX2 13746 lil42Hss lTX1811 1374B gTX64 137U4 I xe60s3 34V8 TW361 1468 TWS7 2468l5 l 1 421157 TX191 13746 TW65 24685 l x l 13W7 1374 TW41 24sss 421160 TX1 13748 TW71 24885 x XI 53 L34V8 1374 jW 48 X68051 42118 TX191 13748 TWtS7 2348 X6_0_3 l34vs1 TW48 2u85 x660s FTX 42H60_3748 13748 24685 l X6_ _Twit 3 134V10 18 ITW39 X66053 421-183 1 24885 34V 12 92X16 13746 IT)(2441 13746_ X66t631 l se 132468 ITX2061 13748 l MMt!5 34V-1 13746 X6603l13748 42Hs34 TX22W1 13748 1 13746 l XOM1 134V4 Tx3 13746 Tx2 13748 X66053 4211685 13746 TX231 13746 I 34v15 l 34Vt ITX2 TX89 1fXd 13746 U40 TX21 1 AZX4, 13748 37j4v X66053 ADDOU^ F_l_ ____l

f FORM NIS-2 OWNER'S REPO-As Required By The Pro"' R REPAIRS OR REPLACEMENTS Is Of The ASME Code Section XI (-,

1. Owner Duke Power Company l.a Date 09/23/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 F72 r-3 r Shared (specify Units )

3a. Work Order # 98644159 & 98540909 (Concrete RemJRolt)

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23086 AS9 WP 21550 (concJrebar removal) WP 23550 (concJrebar renlacemt)

4. Identification of System Containment Class CC

5. (a) Applicable Construction Code per SGRP-SPEC-C-003 19 W/A Edition N/A Addenda, N/A /Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Reiacement Components Column 1 Column 2 _ Column 4 Column5 r Col. 6 Column 7 Column 8

                                                 -                     Manufacturer           Board               Other          Year    Repalred, Replaced, Stamped (yes Name of Component        Name of Mantdaptuire         r                      Nationalu:or        er1                                                   10ASmer Code No                        Name         ----             S-------M-her         Nuimber             ~~.I Concrete (Removed                                                                                                         I-. Repaired           rV No F Repaied for Construction                                                                                                            Replaced          r  Yes A                  Opening)         Duke Power Company                  N/A                 N/A                N/A           1974    r Replacement Concrete (Replaced                                                                                                        r Repalred             17 No for Restoring                                                                                                        r Replaced             r Yes B               Containment)       Duke Power Company                   N/A                 N/A                N/A           2004    ro Replacement      .

PwRepaired 1 No r Replaced r Yes C Rebar Duke Power Company N/A N/A NA 1974- r Replacement r Repalred r No r Replaced r Yes D .r Replacement F Repalred r No r Replaced m r Yes E _ _ _ _Replacement r Repaired r No 1r Replaced r Yes F ., Replacement Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information in items 1 through 3 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. (

7. Description of Work:

Creation and closure of construction opening for removing old RVHAISG/s and Installing new.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure rv Other r Exempt Pressure 59.921 psig Test Temp 84 OF Pressure psig Test Temp OF Test Temp 0F Pressure psig _ _

9. Remark: Work Involved removing concrete. rebar and liner plate to create the construction opening <Z'13 1/3q'eylf above the Unit 2 equlement hatch. After the RVH and two SGs were replaced the old4hwa. I i I r- 2i41A q-3 0 -OL/

plate was re-Installed, rebar re-installed and new concrete placed to re-establish containment. Testina was accomollshed with the integrated lealk rate test. Pressure and temperature numbers came from the Unit 2 Containment Integrated Leakage Test Report, reading # 248. (Applicable Manufacturer's Dala Records to be Attached) CERTIFIC N/A 1974 We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp WA Certificate of Authorization No. WA , +/-wg Expiration Date N/A Signed Datetf CERTIFICATE OF INSERVICEE INSPECTION I, the undersigned, holding a valid commision isgued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of l _-- and -employed by have inspected the components described In this Owner's Report during the period d ~* 5 'a i and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisingfron or connected with this inspection. Qsinectofs Signature Commissions A ., 4 z National Board, State, Providence and Endorsemenls Date 9z30 t 0Y Page 2 of 2

C FORM NIS-2 OWNER'S REP( ' OR REPAIRS OR REPLACEMENTS As Required By The Provi..4ns Of The ASME Code Section Xi

1. Owner Duke Power Company 1.a Date 09/30/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit F 1 172 r 3 r Shared (specify Units )

3a. Work Order # 98540994

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. NWA Expiration Date N/A 3b. NSM or MM # ON-23086 AS9 WP 23555

4. Identification of System Containment Class MC

5. (a)Applicable Construction Code ASME Section VIII 1998 Edition N/A Addenda, 98 Addenda /Code Cases Ni/A (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Rep ired or Replaced and Rep Column I Nam Comwonr; il Column 2 ianuia AMaf.trr ment Components riNumer of Column 3 Manufacturer

                                                                              .um 1   Column 4 National Board Number Column 5 Other identification Col. 6 Column 7                Column 8C ASMECod Year Repaired, Replaced, Stamped (yes Buiit or Replacement            or no)

_ Repalred Wo No Containment Liner r Replaced r Yes A Plate Duke Power Company N/A NA N/A 1974 r Replacement r Repaired r No r Replaced r Yes B FReplacement r Repalred r No r Replaced r Yes c r Replacement r Repalred rNo r Replaced rYes D _ rReplacement F Repalred r No rReplaced FYes E _ Replacement F Repaired r No rReplaced r Yes F rReplacement Page 1 of 2

Form NIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 43on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Creation of construction opening for-removing old RVHA/SGIs and Installina new. (

8. Test Conducted: r Hydrostatic r Pneumatic F Nominal Operating Pressure F Other r Exempt Pressure _ psig Test Temp _ _ 'F Pressure; psig Test Temp -__F Pressure - psig Test Temp _ OF

9. Remark. Work Involves cutting the liner plate above the equipment hatch for construction opening. After moving new RVHA and S/Gs Into containment the cut out liner plate was then welded back In place. Testing Is accomplished with the Integrated leak rate test after plate Is re-welded, concrete repilaced and tendons replaced.

Pressue and temperature numbers came from the Unit 2 Containment Integrated

            'Leakaae test Renort. readina # 248.

(Applicable Manufacturer's Dala Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization No. N/A '56F-- et Expiration Date NWA Signed /W - AWA r-S Date : 3 /0 '7' ( GER1I IrI'A I ijF INItRVIGE: INSPtCI IU I, the undersigned, holding a valid commision issued by the National Board of Boiler and, RP sure Vessel Inspectors and the State or Providence of . and employed by - gna have inspected the components described in this Owner's Report during the'period olgalit6 to S t7VL; and state that to the best of my knowledge and belief, the Owner has performed examinations and' taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described Inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions A) 73 A). < ldspd~ers Signature National Board, State, Providence and Endorsements Date q~ ;3c -- 0 Page 2 of 2 A,

       -C                                             FORM NIS-2 OWNER'S REPP fIJR REPAIRS OR REPLACEMENTS As Required By The Pt          .   , Of The ASME Code Section Xl

1. Owner Duke Power Company 1.a Date _09/22/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1_ of 9

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 72 r3 r Shared (specify Units 3a. Work Order # 98624546(Removal). 98617114(Renlacement)

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23112 AM2 WP 21535H (Removal) WP 23535H (Replacement)

4. Identification of System Reactor Coolant System Class I

5. (a) Applicable Construction Code ASME III 1989 Edition N/A Addenda, No Addenda /Code Cases N/A (b)Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Repaired or Replaced and Rep acement Components Column 1 Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Column 8 National Sod Manufacturer oa Other Year Repaired, Replaced. Stamped (ves Name Of Component Name of Manufacturer Serial Number Number Identification Built or Replacement or no) r Repalred r No Babcock & Wilcox Co. Replaced r Yes A Reactor Vessel Head Mt. Vernon, Indiana 620-0004-51-52 N-105 N/A 1970 r Replacement r Repaired r No Babcock & Wilcox r Replaced W Yes B Reactor Vessel Head Canada 068S-02 209 N/A 2003 17 Replacement r Repalred r No r Replaced r Yes C r Replacement r RepaIred F No r Replaced r Yes D _r Replacement F Repaired r No r Replaced r Yes E Or Replacement r Repaired r No r Replaced F Yes F r Replacement

Form NIS-2 (Back) Sheet 2 of 9 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work Replaced Unit 2 Reactor Vessel Head

8. Test Conducted: r Hydrostatic r Pneumatic 1;7 Nominal Operating Pressure r Other r Exempt Pressure psig Test Temp OF Pressure psig Test Temp OF Pressure psig Test Temp _F

9. Remarki Old reactor vessel head and the reactor vessel were certified under one N-1A form (National Board N-105). Only the reactor vessel head was replaced durIng ONS outage 2EOC20. CRDMs were removed from the old reactor vessel head and Installed on the new reactor vessel head In same core locations. Applied Code Case N-416-1.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the riles of the ASME Code, Section Xl. Type Code Symbol Stamp NIA Certificate of Authorization No N/A o5$&4 --k Expiration Date N/A Signed A - / 7 Date CERTIFICATE OF INSERVICE INSPECTION b 1I, the undersigned, holding a valid commision i sj ed by the National Board of Boiler and Pses e Vessel Inspectors and the State or Providence of / ____and employed by have inspected the components described in this Ownees Report during the period 5-/O - eq to 8- O (4/: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Ccde, Section Xl. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisi om or connected with this inspection. OfJ.4 ICommissions i lc :3 1 -7ZI Ipe 's Signature National Board, State, Providence and Endorsements Date q -ag

)to

S62o.ooo4L. FORM?~ N-IA AMANUFACTURERS'EDATA REPORT FOR NUCLEAR VESSELS

    *              .                Alternate Form for Single Chamber Completely Shop-Fabricated Vessels Only As required by the Pr~visions of the ASNIE Code Rules

(

1. Manufactutcd

2. Manufactured by Babcock & Wilcox 'Co.

for DuePwrC.conte Mt. Vro, O(erne and address of martufacturer) Indiana Nuc~eaf PwerlStation

                                                    -DukePowe    Co.our                                       nay, ou hafoli.na (Name and addreesa o Purchaser)
*3.           Type      Reactor Vessel
                     .04fler. or Vert.)

No. (62o-ooo'-51,-52 (Wtro.Serial) -(Stt-t4 _4- ) Nat!. Bd. No. .N4105

                                                                                                           .                     .flti
                                                                                                                                                   .Yeat Built,       1970'

3a. Applicable ASME Code: Section Ill, liuition 1965 -. Addenda date Summer-i967 ,Case No. MS-67 Ao8-64m2 168 3/8'ID___

4. Shell: Maeil1322 (XInd &Spec. Mo.)

T.8,0 Thk.8*. (Min. of rangespecified) Allow 0 I. Dim681 3182'ID Length...@FtJ 13/16"t S. Seams: Long none H.T.9 X.R. - Efficiency_______7 (11 class B) wethbtutt welded H.T.1-yes X.R .ves No. of C Srxe

6. Hleads: (a) Miatcria See Supplemental Sheet #2for Item #6_____

Location. crow" Knuckle Ellip.tical Conical liemlsphericat Slat .'Iid. to Pressure crop, bottom. ends) Thickness Radius Radius Ratio Apex Angle Radius Diameter (Convex or Concave)

aj.. 6.625" - __ 8 " concave b bottom W 5.000' I_____87R concave IfUtemorable. bolts useA5'4o-P6-B2-3-133-2 L31~45.000 T.TTPt'ia 60 (lUaterial. Spec. No.. T.S..Site. lluthrb. (Describe or Attach Sketch)

Otarpy imrpact .30. ft-lb lld10t0 * @O 0F _Pneuetw-o Test 7.DCSign~pressure'2 2?5 00.... psi at 650 ".,...F.at temp. of ko oF. -Gembreie- Press.32i... Si. S. Safety or Relief Valve Outlets: Number none Size._______Location -

9. Nozzles:

Purpose (.Inlet. Re inforcement nlow OutletC. Drain) Number Diem, or Size T'ype Material Thickness material Attached

                        £Len                  al-hh-f2or                           Tt~emn9_______

to. Inspection Mfanholes, No. none size Location (Openings: Handholcs. No. none size - Location - Threaded, No nn size - Location -

11. Supports- Skirt ..ays.,r ~ No)

Lugs - I-Tunber)- Legs - Other Drbe) . Attached Welded(where to &bottom Ut w) head 12.Remar'ks:.A.- Class A reactor Vessel. Contents: water. 2B....-St-p Slipi lementgil Shep't #2 for addi ti anal remarks,-

                                            'If Poatweld Heat-Treated.

S LIst ether inmtera or external pressure wtithcoincident temperature when applicable. We certify that the statements made in this report are correct and that this nuclear vessel conforms to the ruales of construe. Zion of the ASME Code. Section Ill.. Date, March 24~ 1971 Signed Babcock & Wilcox Co.rng.~u tManulacturet) oierngW D Certificate of Authorization Expires April 10, 1972 C m oet*ngineerinM~ CERTIFICATION 10F DESIGN Deinifrain-.u tBabcock & Wilcox Co.. Barberton,, Ohio htrees analyola report on fie at Babcock & Wilcox Co. Barberton., Ohio Doeeln specifications certified by (Ti ennf J_ Sniyder . Prof. Eng. ye ... 5stte V..& Reg. No. 2235., Stress analyalareport certified by James P. Butti Prof. Eng. Ye S Stae Ohio Rag. No. E-29i1O CERTIFICATE OF SHOP INSPECTION VESSEL MADE BY Babcock & Wilcox Co. at Mt. Vernon, Indiana L the tmdearstgnd. holdlng a vaIId commiatssion Issued by the Nationat Board of Batter end Pressure Veeselinaptetors and/or the State or Province of eand employed by Hartford S. B. I. & I. Co. ot-Hartford, Connecticut have inspected the pressure veined described In this manufacturer's date report on October 17 ,,70 .and stats that to the beet of my knowledge and belief, the neanufecturer has constructed this pressure vessel In, accordance with the ASMdE Code Section IIIt. By aigninC this certificate neither the Inspector nor his employer makes any warranty. expressed at Implied, concerning tie pressure vessel described In this manufactureres date report. Furthen-ors. neither the Inspector nor his employer thall be liable In any manner for any personal Injury o r opetdawlev e or a losa of any W.p arlaing from or connected with this inspection. Date "Marc -to ,...2,L h'.- X, Al/ L&, ; Inspectqr-o SICnaturd

                                                        ,r~L                                         Commissions             NB #3864 National Board. State. Po.ince and No.

4-' 2 F L A CP-SHEET 2 o- 2FP SUPPLEMENTAL SHEET

                      -         FORIM N-1A MANUFACTURERS DATA REPORT FOR NUCLEAR VESSELS Alternate Formn for Single Chamber CoompletelyShop-Fabricatcd Vessels Only As required by the Provisions of the ASME Code Rules

1. MIanufactuetd by Babcock & Wilcox Co. Mt. Vernon, Indiana cN&onee Weufac T'Fwer Station

2. Manufactured fot Duke Power Co. Courtnay, South Carolina (Name and eddress ot Pureha ser)

3. Tye Reactor Vessel No. (_620-0004-51-52 ) att.d.No. N-105 Year Built__97j

                       "       Vert.)                (Le.Se.rTa)    (Stat. & Stati No.)

6.(a) Top head material: A533-B-1-1339-2. T.S. 80,000 and A508-64-2-:L332-2 T.S. 80,000. 6.(b) Bottom head: A302-B-1339. T.S. 80,000 and A508-64-2-1332-2.T.'., 80,000. 90 Nozzles:

 *Purpose     (Inlet.                                                                                                      IRe intfo cement            How Outlet, Dtran)           Number       Dican.. or Size        Typ-                I  aterial            Tlickness          Material              Attached core flood                   2            25"OD                 weld        A50o8-6 14-2-1332-2            6.164'l         integral                welded safe end                     2                                  weld        SA 336-F8M                     -1.54"          integral                iwelded monitor                      2          ,        D.315'D weld              :SA376 TP3o4                     -.270"         integral                welded inlet                        4            48.toD%              1.weld,      A~o& 6 4 -2l132--                                                      welded outlet                       27         75-110D                ..

weld 11.625" integral welded instrument 52 L.035"OD weld SB167 137t Is integral welded CRMH. body _69 4.025'gUD- weld 6 19 integral welded CRMH. M . adapter ai:T weld 'A1-82 F304f .- 7' integral welded - ( - - 69

                                    --      4.-60o       w W..                   1    o Remarks C. Vessel-clad internally with 1/8" minimum SA-371 ER308L except a band in tihe guide lug area of lower shellattachment welds of control rod housings and attachment welds of instrumentation nozzles, which is inconel ER-NICRFE-3.

D. Shell flange material: A506-64-2-1332-2. T.S. 80,000. _ Shell flange size: 165 3/8"ID x 200"0D x 22"' flange thickness. Ilosure head flange material: A508-64-2-1332-2. T.S. 80,000. Closure head flange size: 152 3/8"ID x 200"OD x 30" flange thickness.

                                                                                                                                                                           ) ez       V As Required by the Provisions of the ASME Code, Section III Not to Exceed One Day's Production                                                                       Pg. 1 of 3                -

1.Manufactured and certified by Babcock & Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontario N1 R 5V3 2.Mar-'ictured for Duke Energy Coroporation, 13225 Hagers Ferry Road, Huntersville, NC, 28078-8985 fn of installation Oconee Nuclear Power Plant Unit 2, South Carolina

4. iype, 068SE001 See Ust #1 See List #1 - 2003 (drawing no.) Imati spe na.) ttensi Sbength) (ICRI

                                                                                                                                                                   ,_. w                       _ _sbhl:)

New , S. ASME Code, Section , Division 1: 1989 No Addenda I (See Note #1) (edion) (adenda aate. (class) (Code Gas. no.) S. Fabricated in accordance with CoUst. Spec. (Div. 2 only) _ Revision Date (no) 7.Remarks: JSW N-2 form for head forging is attached. 2-. I. t.mm.dsg fI 1.Nom. Hlin. design - Length overall LI' hickness (n.) See List #2 thickness (in.) See List #2 Dia. ID (ft & in.) 12'-8 7116" _ (ft& in.) . W-50 14. 1 When aoolicnhle. Certificate Holders' nntA Rpnnrts areattndhel fnr encdh ihtm nf this .. ronrt _. National National Part or Appurtenance Board No. Part or Appurtenance Board No. Serial Number In Numerical Order Serial Number In Numerical Order AF11 I) 0688-02 209 (26)

                                                                                                         -(27)

(28) (29) (30) a) (31) (32)

2) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

(33) 'Z.7 3-) _______________________ (34)

4) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

(35) (36) (37) (38) (39) __ _ _ ____ _ _ __ __ _ __ _ _- _ _ _ _ _ __ _ - _ .__ (40) (41) (42)

4) .(43)

                                                                                                         *(44)

(45) (46) (47) (48) (49) _ . (50) ..

                                                                             -                                                     -          -        -At                                temp. 709F Designpressure              2500                    Psig.          Temp.             600                   F           Hydro. -testpressure                   3125 psig           Min.

Supplemental information in the form oflists, sketches, or drawings may be provided (1) size is 8 V'2 X 11, (2) information in items 2 and 3 on this Data Report is included on each sheet, (3) each sheet is numbered and the number ofsheets is recorded on dte top of this form. G.1aI.VRV6svaaadO

I; Y. I>. t- g

                                                                                                                             .       ,              ,           -2i".
                                                                       .    - . ... V   .* W  -  -'      Si                                             I     .

Certificate Hlder's Serial Nos. 068S-02 through E CERTIFICATION OF DESIGN

 '*specification certified by                                    M. C. Keck                                  P.E. state    NC       Reg. No.      18367 Province Design report* certified by                                        L Vizi                                     P.E.State     Ont      Reg. No.      4824420 (vinen WpUcabW)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these.-) Reactor Vessel Head Conforms to the rules of construction of the ASME Code, Section III, Division 1. NPT Certificate of Authorization No. N-2791 Expires JanuaryLZ4 2004 Date J_'(" Name Babcock & Wilcox Canada Signed (NFT Certffrwe Hoider) CERTiFicA:rEOFINSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ontado and employed by Technical Standards & Safety'Authorit jr-_ of Onta(io have inspected these Rems described Inthis Dats Report'on and state that to the

S_

                                                                                                                                                                        ,W Best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances Inaccordance with the ASME Cole, Section Ili, Division 1.              -:k Each part listed has been authorized for stamping on the date shown above.                                                                                               A

-: 5:

t.:'a 3y signing M certificate, neither the Inspector nor his employer makes. any waiTanty. expressed or.implied" concerning the equipment described Inthis Data "S - Repc,, .irthermoreneithertheinspectornorhisemployershaliberfableinanymannerforany-personatinjury-orproortydama4e4)rfossQfanykindarising

                                                                                                                                                                     ':Je
                                                                                                                                                                     -- '7_
      -connected with this inspection.                                                                                                                                      TZ Commissions :

G. Anala ffT)RW10=UNosso Ifb

NUULLtAR PARTS AND APPURTENANCES* .7 I %---1I'z As Required by the Provisions of the ASME Code, Section 1- .1 N Not to Exceed One Day's Production Pg. 3 of Certificate Holders Serial Nos 068S-02 through National Board Nos 209 through dactured and certified by Babcock &Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontaric Ni R5V3 2Wanuftctured for Duke Energy Corporation, 13225 Hagers Ferry Road, Huntersville, NC, 28078-8985

3. Location of Installation Oconee Nuclear Power Plant Unit 2, South Carolina

4. Type; 068SE001 See List #1 See List #1 - 2003 (draweig no.) (Mail spec. ra) (tensite Stranp) (CRN) (year built) 5.ASME Code, Section HL Division 1: 1989 No Addenda I (See Note #1)

(eddon) (addenda date) (dass) (Code Case 0o.) List #1: Material Specification 1Tensile Strength (Min.) Closure Head SA-508 Cl. 3 80 ksi Lifting Lugs SA-508 Cl. 3 80 ksi CRDM Flange SA-182 Gr. F316LN 70 ksi CRDM Tube SB-1 67 UNS N06690 69.9 ksi List #2: Nominal Thickness Minimum Design Thickness

         ,losure Head                                7.00              -                                    4.41" Lfting Lugs                                 5.625"                                                  5.50" CRDM Flange                                 2 75"                                                   2.48" CREM Tube                                   0.625"                                                  0.204" Note #1:
        'Per NR 26755, temper bead repairs were done on selected CROM to head welds. The repaired welds were -

examined in accordance with the rules of NB-4622.11 (d) (3) per the ASME Code, Section lII, Division 1,1992 Edition with1994 Addenda. This Is the only Instance for this component that the ASME Code, Section Il, Division 1, 1989 No Addenda does not apply.

11. i.

1. :7 5.

I W

                                                                                                                                                                               .11'T I
                                                                                                                                                                       -5,    .71 i 17k
                                                                                                                                                                          . -i 7

G:Or.DW6ASV20'63SQ.1doC

                                                                                                                               -crg:ti.              ,,i,-,ito                             `a`-9.S CIATA IRIPGiG. -R 1:rl0:5TIGC'-s R                           gic-IBx
                                                                                                                                                    ;N"Y'CL-A; PART.S AND APU-sRb';-S As      n      zsaurssd b-- the "Provisi.-ns olsat ASe                                      .          rS Code, o¢ni'll NoT to xoe;One Day's P-oduealn 1.wauawe                               ;-nc   cst--e         by ZMnuftvu red fcr'                                                 z       --.                31C;-.on         ftirc      avd.-,               Cr-xw.<                                      IR-,=i
                                                                 -       MLW                                                       -      x . b3-. 3r                                                      rid       ets        ot a a       NERr Y         ............................................
                                                                                                                                                                                                                                                                                   ^sr

3. Locationcfinsf:alsttiavOn Cr Eee Nub-eaz Pow-r TamF, Itnit 2. 4CJ oiee^so5&U _-tZQ 1" 4.Type. ;111849V' f Rev. c5 SA-_08, C_.;3l^8~2 -.......--

5.ASME Code,' Sewian 11I, Oivision t: _ ?Taqg¢deindi - - :

6. Fabiricea,;d in ACCOrdance wi*h Ctrs5 Spe_.. M~iv. 2 only) 'Revision- -_- - --:- _D2 - -_

                                                                                      -*; Hydzis        ocstaU6vsti ncot                                                                eJm:Sc                    t~od4                         .       :-
                                                                                            .r..Claddiu4:...........................................

thidcimes-:. 'sIi~t..0 ps. xi.... reie~-0.20 . r .b. . . -

                                           ,; .            .                 ..          ~,.!Clddrtq -'aietsrl~s-are                                   SIA-1A.,         ARE CL_ EX9-1:.05Lh                                                  -                                       :--.-                       -.                         .;

NoYm' tickriss'(1n.) 7- N :Wn. dtsign'thickknesstn~ (h) 4) DI'i ji2il I'ra 7liglce"(iq6 -73a14^

9. When applicable. Cerfifte Holdirs" Data Reoftis Rpyaea~~ireoecataid t C*each..................................

i ;.-...,.t

                                                                                                                                                                                                                .m:-. o fti~--

t , ,'. - Nashonat . -,National-.....- Part or Apourterrance Board No.-

                                                                       .        .Serial.NUmnber                                                        In Numeriafs Order                                                              Selrimbir                                        - i- Numerkcaiter                                 -       t
                                                          . (11                                 1064                           -                     .               6.                                          i126L
                                                                                                                                                                                                                                                                                      -i   ."  i  ..                                   .        -
          *:7   ..,
          .: '1.                         . -                   14j'                ':           .          .- ,: : -:                        :                                          -.

Si ' ' 213 { . . A..; ; ;

                                                                                                                                                                                                                                                                                                                *. -t          Gu77

t

.- 9!P;

                                . :..                          {S 0)        -- ;          .. :
             ,:                                                ta2,      -- :.               .'*w,_
                                                                ,         , 141A A::

(:i9 ;*,.r.43

                                                                                                                                                                                                                                                             ..    ~~~~~~yn                             t      (28- -..     :-i.

---;;.9'-.;5

                'I              i                                                            ':    '     by)"     '      '-'         "     '     '   "   "   ',    '    ~~~~~.         *-,',.
                                                                                                                                                                                                               !4.. 1 ...........        ;2.-....       -_w........2.,..4.,--
                                                       .'r*{° . 1,'7..   ;              ,'_a

{31t

                                                                                                                                                                                                                                           < * ' ;-;'                      !            ;                 >           :*;           "7-           ,
                                                         .           .          .......                           ,....                                                                                        ::(4} 9t:: :. i:.              ;    .. .........:
                                                                                                                                                                                                                . 1                 ,

A.,% , .

St he e t v .is-,,21.....

li)(22 -. ; :. ft2) l.' An'*

                *.zt
                                                          .MAIb )                       ,s.,,        ,a
                     *.:1.

; ' -. -1 , -I . I,,.--:I,.

                       ,:                                                                                                                                                                                  . ..     .-     .                         I
                             . :                   10. Desin-resue       m"                                                                          psi.       -1Eirmp;                         f/P                       F         Hydraz. ;est cressuirs                                             -              -a          tern           t iFnuded arreacn sheet, l37 22rn&slide' is nxisnieeed 2airi 141sntumber of sheets is.r-c,-rded at the toap

this fhrn.- - - '-.

A);, f ;' .. iS *P.O. It2.: 0133a-714a }^ Job a. >,tw 'l-30 . . ; Beat No. : GW1RS-1-1 JSWt PC. b : .3

FOR\-Z :Sac'k - ? 2 C -i cB:--F-PCA-S.CN O-F CE~iGN-7s5I :~Jzeccs2 !C-s to!e 0 ir it

                                                                                                                             -    -    =~-tca                    -         e . -
                                                                              -w        :

LN - . a-;. Owr-, Vi~~theadein

                           -~jj                           'ils Ceccra f-czrmtcland thiet '1*is (ihee crcrxims to the riles of co~o.                       of   e ASMECcdSS:on 1II,Oivision,'..
     !PJT Certificate cof Authorization N.                                  ip-72-E.
                                                      *E
                                                                                                                                                        -3e          2;9' 20.04 be
                                                                       -:;m5el            WcrkcsjiLtd-       ..

Oa~t- Mar. 14, C~ NaS~Urf ~ zi.. . . c ____ ____ I cERTIFICAT FIS~T I. the undersigned. holding: a valid corrrnissiora issued:by th e Nationalt Board Bor and Pressure Vassel Inspflctre and~-the~Stat o-Pouc gol of______and f emp'loyed k S Sy 1% & ~t- CO ________ of F T.haPmsecD these 1ars describ= dIn th.s- Dat er o ~-a ds.e n o.h

     !fl. Division 1; Each ~pzrit listed. has~ be'en s~thadizsdfori~tapfing on:.6te date-,shown above.

By signing This ce-tificate, neither the insowectC norhnis emp'oy'er rti~keS any..irrV exprss.eld ar-pi~~cn 1'imndn eu~e~dsrb

                  ~i tis ~taRepotFrthrmoe, eth'eT th~ insector nor nit rnop~b~ec shsll b= Wable in any mannerfror any perscnal ilr                                                     rpl         dma qt or os oran knd riin frm rcnnicted.wih thdiis                  inspecraon.s'"

.r Cofri7d ~ IBUL~ .~niA~.I_________________

                                   ~*.. - -. ., ~~ ~

VCLC' ~ ~ ~ ~ ~ ~ Ci riisi ns c d t~.e~~~f~il i ~i rec.icc

~..Mut~rze A: *} -

b - -v-ealulla:uS

; .: I . dear *,rpero., : :

                                                                                                                            *  '.'        .             .. *.8{d;(

e a t d. tf e. v.vi,

'I                                                                                                                        :     ;- 1 waw;                          ~         4         ~      C~

i--ACOMWC "NSPECTIDtN.- IAPPROVED:

r FORM NIS-2 OWNER'S REPOSE OR REPAIRS OR REPLACEMENTS 0-As Required By The Prov. is Of The ASME Code Section Xl

1. Owner - Duke Power Company 1.a Date 9/30/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet 1 - of 3

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 172 r3 r Shared (specify Units 3a. Work Order# 98617114

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23112 Part AM2 WP23535H

4. Identification of System Reactor Coolant System Class 1

5. (a)Applicable Construction Code ASME 1989 Edition N/A Addenda, NoAddenda /Code Cases NIA (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

A Ir4onfifinafinnr nf (~nmnnngantQ Pannairme nr RanInnard anti Paninnamant trnmnnn~ntAq Column 1 Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Column 8 I National -ASME ode

                                                             .           Manufacturer           Board            Other           Year Repalred, Replaced. Stamped (vyes Name a of Co           n      ame of M.anuiaoturef        Se.ra' Number         Number         Identification      Built   or Replacement            or no)

_SEE ATTACHED SPREA CHEET r Repalred F No SPREADSHEET SPREADSHEET FrReplaced Ye FOR SERIAL FOR CORE r Yes A Segment Flange Framatome ANP NUMBERS NIR LOCATIONS 2003 P. Replacement SEE ATTACHED SEE ATTACHED r Repaired i; No SPREADSHEET SPREADSHEET r Replaced FOR SERIAL FOR CORE r Replaced r Yes B Hold Down Bolts Framatome ANP NUMBERS NIR LOCATIONS 2003 F Replacement F Repaired r No

                                                                                                                                          .r  Replaced         r  Yes c    C.                                                                                                                             r Replacement r   RepaIred         r   No r   Replaced         r   Yes D                                                                                                                                   r Replacement r   RepaIred         r   No r   Replaced         r  Yes E                                                    .                                                                                  Replacement r   Repaired           F No r   Replaced           F Yes F                                                                                                                                   r Replacement

Form 1IIS-2 (Back) NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size Page 2 of 3 is 8 1/2 in. x 11 in. (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work New segment flange and 8 hold down bolts Installed on each core location.

8. Test Conducted: F Hydrostatic r Pneumatic 17 Nominal Operating Pressure F Other F Exempt Pressure psig Test Temp OF Pressure psig Test Temp OF Pressure psig Test Temp OF

9. Remarks Installed old CRDMs with new segment flange (split nut ring) and 8 - 1 1/8" hold down bolts on the CRDM Core Locations listed. Old segment flanges were left on old head and old hold down bolts were discarded as radioactive waste. Attached spreadsheet lists core location for each of the new segment flanges and bolts used to Install the CRDMs.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the iules of the ASME Code, Section Xl. Type Code Symbol Stamp N/A Certificate of Authorization o 9 Expiration Date N/A Signed /< I-'4 Date A/ 361 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commision issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of OVA __ and employed by _______ have inspected the components described in this Owner's Report during the period jg yO-OY to ' I.2 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

              ,~~~Signatur                           Commissions      AJ 14 fneclor's Signature                                       National Board, State, Providence and Endorsements Date      _t-3____O__

2EOC20 Split Nut Ring and Hold Down Boft Location Database AF 1.Owner Address - Duke Power Company 526 S. Church Street, Charlotte, NC 28201-1006 IR

                                                                                                   -- 1-4 I   Ll l.'
                                                                                                                               +

II 11R II 4 a Data Sheet I - 3 of i - 3 (f

                                                                                                                                               -- -i.

2. Plant IOconee Nuclear Station I i

I l l il I I Address 7800 Rochester Rwy. Seneca, S.C. 29672 _ _ _ _ _ 2a. Unit _ ) _ _ __ _ _ _3a. Work Order# 9861 7114_

3. Work Performed By Duke Power Company _ Repair Organization Job Address 526 S. Church Street, Charlotte, NC 28201-1006 _I I I_

Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A _ 3b. NSM or MM # ON-23112 Part AM

4. Identification of System Reactor Coolant Svstem Class 1

5. (a) Applicable Construction Code S§M E.. 1989 Edition LAddenda, Ng Addenda /C2de CaseN __=

(b)Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Added (1992 through 1992 Addenda for ClaaaMC and ____ cc and their supports.) I

8. Identiiication c a t of Components a Repaired or Replaced and Replacement Components B6 GN-49 GN-7457,7510,7295,7446,7372,7537,7489,7639 K3 GN-58 - N-7444,7241,7325,7174,7477,7276,7216,7470 B8 GN-41 GN-7296,7561,7517,7385,7460,7170,7509,7637 KS GN-59 3N-7220,7205,7518,7328,7496,7502,7344,7618 B10 GN-33 GN-7568,7416,6797,6354,7301,7224,6349,7414 K7 GN-38 3N-7369,7259,7234,7200,7181,7339,7168,7340 CS GN-44 Ri .-- ~,

GN-7515,7469,7306,7453,7567,6538,7327,7643 K9 GN-57 GN-7164,7249,7349,7593,7525,7233,7638,7304, K11 GN-66 GN-7631,7513,7332,7424,7463,7160,7615,7368 C7 GN-5 GN-7575,7417,7565,7559,7283,7270,7222,7560 K13 GN-68 GN-7319,7371 7486,7225,7274,7388,7636,7356 C9 GN-46 GN-7622,7599,7176,7236,7600,7603,7534,7543_ C1 GN42 GN-7314,7426,7478,7475,7548,7193,6565,6581 L2 GN-28 GN6763,6814,7336,7251,7165,7383,7608,7175

                                                                 -              .          3-            u            L4              GN-34            GN-7474,7440,7359,7431,7508,7522,7617,7394 D4                GN-52           GN-7256,7420,7573,7293,7596,7240,7229,7519                             L6              GN-27            GN-6718,7389,7467,7626,7495,7623,7201,7255 D6                GN-17           GN-7B30,7429,7443,7507,7554,6837,7263,7326                              L8             GN-63            GN-7311,7260,7594,7197,7472,7434,7454,7397 D8                GN-56           GN-7413,7273,7586,7563,7436,7238,7271,7564                            L10              GN-50            GN-7213,7516,7350,7557,7387,7178,7287,7302 D10               GN-17           GN-7448,7488,7438,7491,7290,7569,7363,7562                            L12              GN-51 _          GN-7391,7398,7390,7323,7570,6561,7376,7190 Ui 2                 GN-9            GN-6719,6768,7545,7172,7606,7199,6749,7375                            L14              GN-53            GN-7341,7307,7441,6771,6544,7571,7484,7632 E3                 GN-7           GN-7353,7452,7551,7549,7524,7316,7641,7523                       l    M3               GN-21            GN-7267,7566,7303,7634,7348,7150,7511,7281 ES          l     GN-2            GN-7583,7188,6847,7185,7465,7539,7619,7364                            M5               GN-13            GN-7159,7450,7179,7195,7346,6717,7620,7244 E7                GN-6             GN-7403,7428,7580,7581,7447,7433,7503,7231                           M7               GN-12            GN-7498,7456,7187,7281,7597,6542,7451,7152 E9         l      GN-23           GN-6574,7412,7182,7538,7601,7235,7374,7219                            M9               GN-43            GN-7324,7419,7202,7227,7553,7228,7439,7279 Eli               GN-35           GN-7184,6761,7459,7280,7611,7367,7278,7482                             Ml1 Mj               GN-14            GN-7189,7366,7365,7505,7305,7552,7648,7192 E13               GN-45           GN-7264,7252,7345,7555,7531 7247,7358,7320                            M13              GN-25            GN-7421,7400,7449,7445,7645,7337,7298,7223 F2                                    N-7334,7258,7243,7647,7183,7309,7158,7621 GGN-19                                                     -           N4              GN-69            GN-7308,7338,7362,7402,7530,7282,7487,7629 1 F4                GN-67           GN-7406,7277,7558,7186,7352,7535,7330,7415                 l           N6              GN-10            GN-7262,7208,6584,7595,7318,7226,7492,6740 F6                GN-8            GN-7455,7476,7458,7529,7242,6350,7471,7149                             N8              GN-64            GN-7550,7546,7614,7248,7321,7542,7399,7628 F8                GN437           GN-7504,7396,7198,6562,6774,7607,7497,7378                 l          N10              GN-15            GN-7576,7430,7230,7215,7232,7269,7250,7409 F1O               GN-55           GN-7254,7410,7191,7237,7462,6777,6370,7395                            N12              GN-29            GN-71807373738676446578,72847425,7408 F12 F14 GN-61 GN-32 GN-7169,7642 7380,7526,7609,7646,7221,7591                        TVl                                         .,`,7 GN-7589,7157,7633,7527,7257,7315,7357,7272                             OS5       l       N-31 'GN-7171,7370,7461,7473,7483,6714,7480,7218
                                      -                              m                  --         M       --          07              O-l              O-357381,.7312,7521,7501,7547,7640,7500 G3                GN-3            GN-7624,7602,7541,7435,7574,7154,7310,7322                             009             GN-65            GN-7203,7544,7299,6560,7217,7466,6353,6576 G5         r      GN-26           GN-7212,7329,7177,7360,6815,6724,6751,7423                            011              GN-22            GN-7613,7354,6753,7156,7204,7286,6813,6737 G7 G9 GN-4 GN-60 GN-7418,7404,6386,7528,7342,7163,7612,7210 GN-7392,6778,6801,7239,7211,7393,7153,7313 l21                            = &`=M P6              GN-18            GN-7479,7347,7196,7300,6569,7604,7590,7536 Gil                  GN-30         IGN-7556,7579,7616,7355,7627,7377,7246,7161 I                            P8              GN-20            GN-7155,7206,7401,7610,6537,7214,6782,7335 G13               GN-54           GN-6799,7605,7331,7512,7432,7294,7167,7411                            P180             GN-48            GN-6781,7268,7514,7625,7490,7533,7379,6775
                                       -   -    ,. ,           ,.                 -           -          1      I     07        1     (N-1l            rN-7.4qq 7!tal 7~12,7521,7501,7547,7RWfl75 H2         l      GN-24           GN-7266,7343,7407,7292,7468,7361 7585,7275                 I           09              GN-65           IGN-7203,7544,7299,6560,7217,7466,6353,6576 H4                GN-42           GN-7351,7422,7151,7317,6804,7494,7253,7405                            011              GN-22            GN-7613,7354,6753,7156,7204,7286,6813,6737 H6                GN-39           GN-7288,7540,7427,7297,7499,7384,6741,7635               l           _ _           ,              ,

H8 GN-36 GN-7587,7207,7506,7588,7582,7532,7162,7592 I I P6 I GN-18 IN-7479,7347,7196,7300,6569,7604,7590,7536 H10 T OGN-47 IN-7464,7485,7481,7194,7493,6831,7382,7584 I P8 I GN-20 IGN-7155,7206,7401,7610,6537,7214,6782,7335 H12 T OGN-16 IGN-7598,7572,7166,7577,7285,7289,7265,6742 PlO I GN-48 GN-6781,7268,7514,7625,7490,7533,7379,6775 IH14 I GN-40 IN-7442,7520,7173,7437,7578,7209,7245,7291 1 PlO GN-48 GN-6781,7268,7514,7625,7490,7533,7379,6775

                                                                   -  <>   '-s                                       07                ON-Il           GN-7333,7381,7312,7521,7501,7547,7640,7500 12                              GN2  N-7266,7343,7407,7292,7468,7361,7585,7275                -        09              GN-65            GN-7203,7544,7299,6560,7217,7466,6353,6576 I

H4 GN-42 GN-7351,7422,7151,7317,6804,7494,7253,7405 011 Ol GN-22 GN-7613,7354,6753,7156,7204,7286,6813,6737 lH6 GN-39 GN-7288,7540,7427 7297,7499,7384,6741,7635 l - =T =_ _ == ' - L H8 I N-36 GN-7587,7207,7506,7588,7582,7532,7162,7592 I P6 GN-18 GN-7479,7347,7196,7300,6569,7604,7590,7536 IH10 I N-47 LN-7464,7485,7481,7194,7493,6831,7382,7584 PP GN-20 GN-7155,7206,7401,7610,6537,7214,6782,7335 H12 GN-16 l N-7598,7572,7166,7577,7285,7289,7265,6742 PlO GN-48 _N-6781,7268,7514,7625,7490,7533,7379,6775 IH14 l N-40 1GN-7442,7520,7173,7437,7578,7209,7245,7291 11 I 1 1 1

r 1 CLIMIRIII do Page Sec At Lni Col Rl:C THK EXI QJVR a p N m-~

CIl q m Wlwm Fae ec At Lnl Col F.EC TRK EXT CVR

                  'p   ~!                  P

   --                                                     FORM NIS-2 OWNER'S REPn-             OR REPAIRS OR REPLACEMENTS                                                    -

As Required By The Pro. ,ns Of The ASME Code Section XI

1. Owner Duke Power Company 1.a Date .. 09122/04 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet I of 2

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Seneca, S.C. 29672 2a. Unit r 1 1P2 r3 r Shared (specify Units I 3a. Work Order # 98616047

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date N/A 3b. NSM or MM # ON-23112 AM3 WP 23536H

4. Identification of System Reactor Coolant Class 1

5. (a)Applicable Construction Code ASME li NC 1989 Edition N/A Addenda, No Addenda /Code Class WA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

6. Identification of Components Reoaired or Reolaced and Replacement CommonAntq Column 1 Column 2 I Column 3 Column4 Column 5 Col. 6 lColumn 7 Column 8

__National --- ME Code Manufacturer Board Other Year Repaired, Replaced, Stamped (yes N,,,vua,.~a%.iu.~. ~ *,*~******,,*MM#.It c a .me amant fnlr nnl r Repaired r No Hanger/Support rReplaced r Yes A 2-57-1422-H6432 Duke Power Company N/A N/A N/A 2003 1v Replacement r Repalred 17 No Hanger/Support r Replaced r Yes B 2-57-1422-H6431 Duke Power Company N/A N/A N/A 2003 17 Replacement F Repaired r No r Replaced F Y C r Replacement r Repalred F No rReplaced F Y D r Replacement r Repaired r No F Replaced F Yes E r Replacement r- l r Repalred r No r Replaced r Yes F rReplacement Page 1 of 2

Form NIlS-2 (Back) Sheet 2 of 2 NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1)size is 8 1/2 in. x 11 in. (2) Information in items 1 through 43on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of -- this form. ('i

7. Description of Work Replacement of RVLIS hangers 2-57-1422-H6431 and H6432.

8. Test Conducted: r Hydrostatic r Pneumatic r Nominal Operating Pressure r Other Pr Exempt Pressure _ _ psig Test Temp °F Pressure psig Test Temp _ _ 'F Pressure psig Test Temp OF

9. Remark. Hangers 2-57-1422-H6431 and H6432 are exempt from reporting per IWA-7400 (a)(4) of ASME Section Xi due to line size < 1" however these hangers are welded to the service structure flange which Is part of the NF boundaryvThis form covers the welds only.

(Applicable Manufacturer's Data Records to be Attached) CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi. Type Code Symbol Stamp N/A Certificate of Authorization No. NIA S Expiration Date N/A Signed Zio 4 'zE E oS Date 0'TZ a 0 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commision issued by the National Board of Boiler and Presu; Vessel Inspectors and the State or Providence of -- and employed by _____ have inspected the components described In this Owner's Report during the period . -iz22 to Go- L; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. _Commissions _ __. _ _ k ? Pi t)jR In/pecto~e SIdinattre National Board, State, Providence and Endorsements Date .iL-41*-4L Page 2 of 2

f f-

                        -IA
 'M frflt.
              . m-p a.V

   *Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI I  Work Order Number                  Sheet 98745816                         I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/15/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201 -1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Pipe (1) DPC None None None 2005 Installed NO 436J-DE-012 (2) 436-DE01 DPC None None None 2005 _2 Corrected NO I 9 4.- I 4* 4.- *I. 4_ . - ._-

                          .4                 .4                  4                4                       4.        4-..               4

7. Description of Work

_ ___=_ ___ The piping inlet flange was pitted and was replaced prior to the flange develop a leak. To aid in the replacement a short i k ection of pipe was also replaced and the u-bolts that hold to pipe to a hanger were replaced.

8. Test Conducted El Hydrostatic I Pneumatic J Nominal Operating Pressure D Exempt R Other Pressure PSI Test Temperature OF I

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI _ Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 98745816 I 2 of 2 o The following items were replaced either for ease of maintenance or preve$&i Nr , 2 inch stainless steel pipe, SA 312 F304, stock code 149537, UTC # 10;8759 2iiqjf N pipe flange, SA 182 r3 stock code 87821, UTC #1084048; 2 inch stainless steel full coupling, SA 1821304,YNsock code 67999, UTC # 1081617; 5/8 inch threaded rod, SA 193 B7, stock code 297412, UTC # 1083362; and 2 inch heavy hex nuts, SA 194 Gr. 2H, stock code 293556, UTC # 1074343.

e The following parts were replaced on pipe support 2-51B-436J-DE-012: 3/8 inch bent bolt with nuts; Stock Code 35313, UTC # 1074993 (U-bolt 3/8" dia. x 2" NPS) e 0 e 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Nc't Applicable Signed jg X4i-6wner or L a ner'soesigWe, Title Senior Engineer Date 11/15/2005 U I CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,.aoerdv ck~, w and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /0- ;'- Or to .. ' /2-o . a , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions

               -      Inspector's Signature                                          National Board, State, Province, and Endorsements

'Of Date v Z -JZ- r

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98503437 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 j 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection , ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

Wp-stream Orifice UNK UNK UNK UNK UNK Removed NO A ssembly__ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ __ _ _ _ _ __ _ _ _ Up-stream Orifice FlowServe UNK UNK PN: CPM-9428- UNK Installed NO Assembly (1) ______ E479-7 ____ Down-stream UNK UNKUNK UNKUNK Removed NO Orifice Assembly Down Stream PN: CPM-9429-Orifice Assembly FlowServe UNK UNK E479-7 UNK Installed NO (2) E7-Pipe (3) DPC None None None 2005 Installed NO 435H-JC- 1802(4) DPC None None None 2005 Corrected NO 43HJC10 .,_4_ ___ ==_

7. Description of Work The orifice assemblies are made with a series of stacked plates. Each refueling outage the orifices assemblies are RT to ensure the inside parts have not started to wear out. When wear is detected plans are made to repla.e at the next available outage. During last RFO wear was noticed so it was decided to replace orifice assemblies. Both orifices and a section of pipe was removed to allow replacement.

8. Test Conducted Hydrostatic F Pneumatic H 3 Nominal Operating Pressure a Exempt l Other IF Pressure _ PSI Test Temperature _ OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98503437 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Up-stream socket weld orifice assembly from Flowserve; CPM-9428-E479-7; stock code 439460, UTC t 1062050; SA 479 TP316L 0 Down-stream socket weld orifice assembly from Flowserve; CPM-9429-E479-7, stock code 439461, UTC # 1055596 e 1.5 inch SS pipe, SA 376 TP304; stock code 149472, UTC # 1077294; Section III Subsection NC.

0 Stainless steel pipe attachments replaced as part of the pipe: change out. Stainless steel flat bar, 1/4 inch thick x 2 inch wide, A 240 Grade 304, stock code 21700, UTC # 1042632 e -0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Net Applicable Signed Senior Engineer Date 11/16/2005 Owner or Owner's Deysjnee t CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,hi~ez.Ja and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period _ or

                                                              -_____               to        3/-So or                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. f__ fCommissions ___ ___ __ ___ _ 4/& $Y '// AdL rsspector's Signature National Board, State, Province, and Endorsements LJUsL n//t //-so <rl

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI

                                                                                                   .~~             I.

Work Order Number Sheet

                                                                                          '98738640-02                      1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/8/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Steam Generator - Reactor Coolant System, Feedwater System, ASME Class I

5. ( 142 (a) Applicable Construction Code: ASME Section III 19 Edition, No Addenda, _I42 Code Case (b) Applicable Edition Section Xl Utilized For R/R Activity 19 98 Edition, 2000 Addenda.

(c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No) 2A Steam Generator, B&W Canada 006K03 207 2003 Removed YES Primary Tubing . _ _

_=- = - -=

7. Description of Work

         - or ---- _ _ _ _

Frubes (row-column) 53-114 & 86-118 are being removed for metallurgical examination of wear scars and will plug tubesheet by welded plug in lower head. These are not defective tubes that would require repair and are being pulled to assist with root cause evaluation PIP 05-2678.

8. Test Conducted F1 Hydrostatic F] Pneumatic [i Nominal Operating Pressure B Exempt L1 Other Pressure PSI Test Temperature

Form NIS-2 Owner's Report for Repair/R eplacement Activity As required by the provisions of the ASME Code Section XI WorkOrderNumber Sheet 98738640-02 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

O Alloy 690 welded plug. (Framatome P/N 5052976-001, Stock Code 590067) ASME designation N06690 ASME SB-166 s(/- 3q{31/ e Alloy 690 welded plug. (Framatome P/N 5052976-001, Stock Code 590067) ASME designation N06690 ASME SB-166 0 0 0 e 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed / i I Date // -/- 2--

                //       Owner or Owner's     'signeD TitleU CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,                 o                  and employed by                    HSB CT of                                Hartford, Connecticut                            have inspected the components described in this Owner's Report during the period                 / 0-        Or o4-      to      ,     *.t-os-                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. AWl Commissions l1 ector's Signature National Board, State, Province, and Endorsements Date

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI - Work Order Number Sheet 98758028 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/14/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Low Pressure Service Water, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

~1itFanged LPSW__ headers for 2B2 DPC none none none 1970 Corrected NO RCP Motor Air C oo ler (1) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 4. 4.- I 4.

                         .9                   1                                       1                        .9                               .9 4                  .9                                      -4.                        4.                               .9

4. 4 I- 4 4. 4- 4 I. h & I d. *

7. Description of Work The flanges on the LPSW hearer were one hole and the flanges on the upper air cooler were two hole so one set of flanges had to be rotated so the flanges could be bolted together. Since it would be easier to pressure test the header pipe

   'nd welds it was decided to rotate the header flanges.

8. Test Conducted X Hydrostatic LFPneumatic FI Nominal Operating Pressure LF Exempt LI Other Pressure 115 PSI Test Temperature 68.5 OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number I Sheet 98758028 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Replaced two 3 inch carbon steel flanges with stainless steel flanges. Material SA 182 Grade F304, Stock Code 87823, UTC #s 842434 & 1007241.

e

      § CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI.

Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed 4a--A l Xt Id Senior Engineer Date 1 1/14/2005 Owner or Ownerwfesi !4, Title CERTIFICATE OF IINSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of o geviv and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ,/_. Y - ' to .z-ee-o S , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section .l. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. i i Commissions at

                       `~-tor's' Signature                                           National Board, State, Province, and Endorsements Date     /,-o3 lI

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98554046-03 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/10/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B331.7 19 69 Edition, No Addenda. No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) for Valve 2HP-7 1 UNK UNK UNK UNK UNK Removed NO Inlet Pipe Flange for Valve 2HP-71 lJNK UNK UNK LJNK 2005 Installed NO (1) 0 0

7. Description of Work Flange was replaced because the original flange had developed pits overs its 30 year life.

8. Test Conducted

[l Hydrostatic i Pneumatic Z Nominal Operating Pressure L Exempt Other H Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 98554046-03 I 2 of 2 0 3inch stainless steel WNRF flange: SA 182 Grade F304. UTC # 917811. S/C # 87809 e

e 0 e 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Auth ization Number Not Applicable Expiration Date Not Applicable Signed Sertior Engineer Date 11/10/2005 Owner or O0e?/Designee, Title 3 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of hagse V and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period S-, 6° $ to or -o s , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. 1% Commissions /4 ' ./A'c IInspector's Signature National Board, State, Province, and Endorsements Date ° I

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98754948 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/15/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not App[icable Charlotte, NC 28201-1006 Expiration Date Not Appllicable

4. Identification of System, ASME Class Feedwater System, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section Xi Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / Na)

Pipe (1) DPC None None 'None 2005 Installed NO

7. Description of Work The original pipe assembly was removed due to a leak. The assembly was sent to the Applied Science Center for cause valuation. The cause for the leak was determined to be due to poor quality weld. There was lack of fusion in the root Grass and porosity through out the weld.

8. Test Conducted l Hydrostatic n Pneumatic 3 Nominal Operating Pressure E Exempt l Other Pressure PSI Test Temperature ___ IF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet I 98754948 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o The following parts were replaced by this work: 1 inch Pipe Cap, 3000 #, SA 105, stock code 48299, UTC # 1049171, Section III Subsection NC material; I inch Half Coupling, 3000#, SA 105, stock code 68455, UTC # 1066185, Section III Subsection NC material; and 1 inch Pipe, Sch. 80, SA 106, stock code 149370, UTC # 1062927, Section III Subsection NC material.

0 0 0 e 0 0 Aw 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Ap licable Expiration Date Not Applicable Signed / - O Senior Engineer Date 11/15/2005 Owner or er's e e, Title CERTIFICATE OF IINSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of G d,*tw and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period O to W/-Zf.o - , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any wind arising from or connected with this inspection. Commissions __ _ _ __ _ _ __ _ _ __ _ _ Inspector's Signature National Board, State, Province, and Endorsements Date 7-2t f Ih --

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI - Work Order Number Sheet 98727683-38 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 2820 1-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.-

(a) Applicable Construction Code: USAS B331.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number B3oard No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Rear pivot mount Grinnell N/A N/A N/A N/A Removed N/A for Fig. 200 Rear Brkt for Fig. Grinnell N/A N/A N/A N/A Removed N/A 200 Fig. 201 Extension Piece Anvil N/A N/A UTC 1085258 N/A Installed N/A Rear Brkt for Fig. w; N/A N/A UTC 1081978 N/A Installed N/A keF' 144O t 4j lIA l/ NIA tN/A Pkevomte UI14 Reau f,3r~) 4.'I "ZoN/A N/A LAM~106 913q N14 jd~ifkl" N/A

7. Description of Work Revised RCPM snubber support 2-50-0-1066A-RCPM-2B2-SS1 per OE200419

8. Test Conducted E Hydrostatic nI Pneumatic L Nominal Operating Pressure LI Exempt E Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI I Work Order Number 98727683-38 Sheet 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed i4 <e *. k - -- Date /1// __/__ _ Owner or Ovwner's Designe, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of X,&trA Z'teoe>.1NA and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period Yo -2 7-DoT- to //2/-ofu , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. __ Commissions _ _iC_ _ __) _ _ _c lnspector's Signature National Board, State, Province, and Endorsements Date 4 '.- E- -

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98727683-40 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Misc. Plates N/A N/A N/A N/A N/A Removed N/A Rear Brkt for Fig. Anvil N/A N/A UTC 1068739 N/A Installed N/A 200 1" plate (item N/A N/A N/A UTC 1072774 N/A Installed N/A

18) _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _
1712 paeie N/A N/A N/A UTC 1071258 N/A Installed N/A

               #17)                                                 __                 _   _   _  _  _ _              _   __    _    _  _

7. Description of Work Revised RCPM snubber support 2-50-0-1066A-RCPM-2B2-SS3 per OE200419

8. Test Conducted

[i Hydrostatic [] Pneumatic R Nominal Operating Pressure FI Exempt J Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xl CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed / f ' Z4 / I Date /_/_//_ _ _ _ __ _ _ Owner or Orwner's DesignieTitle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A41,rA' 4!.t'oeI..sN and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /0 o A ,pt to M/-2/- or- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions A/C/A~o/Aft Inspector's Signature National Board, State, Province, and Endorsements Date //-& / - oR

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98727683-39 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: USAS B331.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number B3oard No. Identification Built Removed, Code or Installed Stamped (Yes i No)

Plates & pipe N/A N/A N/A N/A N/A Removed N/A Rear Brkt for Fig. Grinnell N/A N/A N/A N/A Removed N/A 200 Rear Brkt for Fig. Anvil N/A N/A UTC 1068739 N/A Installed N/A 200 2" plate machined N/A N/A N/A UTC 103 6576 N/A Installed N/A to 1 1/2"

7. Description of Work Revised RCPM snubber support 2-50-0-1066A-RCPM-2B2-SS2 per OE200419

8. Test Conducted Hydrostatic Ej Pneumatic FI Nominal Operating Pressure LI Exempt 1i Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98727683-39 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Noat Applicable Signed AF go A Date J/Ca OwL4 ner or Owner'I D-esignee, Tfe CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A1/oX7,, Gf4. eOd& v1 and employed by HSB CT Of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /c? / ' OS- to .//-Z/-O5 , and state that to the best of my knowledge and belief, the Owner has performed examinations and takien corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. HiCommissions AJ/1C1VLV-J-1Vdc

               ---- nspector's Signature                                       National Board, State, Province, and Endorsements Date

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI . Work Order Number Shet - 98711484 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Appl icable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No) 2RC IV 163 Kerotest .Go1 K = Removed NO 2RCIV-163 Flowserve 49BAH 1412 UTC-1075671 2004 Installed YES 4 4 4- 4. 4. 4- +

                     .4                  J.                  .4 -               4                     .1.        .4                .1.

I7. Description of Work OE200154 Replaced Valve and tubing fitting. -8. Test Conducted lI ydrostatic Pneumatic FLI Nominal Operating Pressure L Exempt OtherF H Pressure PSI Test Temperature OeFr

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I 98711484 I 2 of 2 0 Replaced leak injected valve. 0 e 0 e 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed U 1- TE%\CA*'.. 5?sckkL.1r Date 11 \ S Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A.6 .' G .,A and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ________ to A-' f- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions =,'< 4'c inspector's Signature National Board, State, Province, and Endorsements Date Xi'i44

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98759439 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/15/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Low Pressure Service Water, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Pipe (I) DPC None None None 2005 Installed NO

7. Description of Work I During installation of the Low Pressure Service Water header it was determined that one flange on the air cooler was not narallel so the flanges did not mate together. To correct this problem the flange on the header was cut out and adjusted I O'by adding a section of pipe.

8. Test Conducted 0 Hydrostatic F] Pneumatic n Nominal Operating Pressure DExempt F__Other Pressure 115 PSI Test Temperature 69 OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number I Sheet _ 98759439 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 The followin2 part was replaced: 3 inch carbon steel schedule 40 pipe, SA 106 Grade B, stock code 1493 34, UTC # 1074681 0 ; _ __0 O COMPLIANCE 0

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed / 4 ,1 111 Owner or wner sfeinee, Title Senior Engineer Date 11/16/2005 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of V &v4,. and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period // -/a- CD to //-.I _OS, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. i,* Date I-Tnspector's

              //      05 Signature Commissions 4C/m                   A't-National Board, State, Province, and Endorsements

0 Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI

                                                                                                                    -U  _.

Work Order Number Sheet 98727280 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 0 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 6/6/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Condenser Circulating Water, ASME Class 3 5.

(a) Applicable Construction Code: ASME Section III 19 77 Edition, 1978 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No) i Standby Shutdown Facility (SSF) HVAC Ingersol-Rand 0979-173 UNK Model 1 x 10 1979 Corrected NO Service Water Pump # 1I

                     -~_                                                                              =  --    _==

7. Description of Work Work on this pump was performed to repair a packing leak. During this work technicians noted the bolting associated with the packing galnd was corroded. The bolting was replaced as a good maintenance practice and the pump was repacked.

l 8. Test Conducted Ad [1 Hydrostatic LI Pneumatic 3 Nominal Operating Pressure LI Exempt L1 Other Pressure PSI Test Temperature

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI _ Work Order Number Sheet 98727280 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Bolting for the packing pland on the SSF HVAC Service Water Pump # 1 was replaced. This included 2 packing gland studs (ASME SA 193 GR B7, Stock Code 205134, UTC 967055),21 packing glud nuts (ASME SA194 GR 2H, stock code 293556, UTC 1074343), 2 Gland Follower Bolts (ASME SA193 GR B7, Stock Code 176981, UTC 1011645), 2 Gland Follower Nuts (ASTM A194 GR 2H. Stock Code 131419. UTC 1073090) 0 e

0 0 e 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xi. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Nat Applicable Signed Ago-L

                                              ))A..             e)           Date      L_  __;L_3   /D0S5 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A,/0,erw L 1'zaz ,A)4               and employed by                     HSB CT of                                Hartford, Connecticut                            have inspected the components described in this Owner's Report during the period                4 -C -oSr           to .o-Zo -o"S                           , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any ,kind arising from or connected with this inspection.

                  -   <j  U i                         Commissions  A/I-/i/         AId"C-
               - tispcror's Signature                                         National Board, State, Province, and Endorsements Date      Jo -Zo -OS

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98705438 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/02/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Liquid Waste Disposal System, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2LWD-99 Velan UNK UNK None UNK Removed NO 2LWD-103 Velan UNK UNK None UNK Removed NO 2LWD-99 Flowserve 67BAQ 1459 UTC-1078379 2005 Installed YES ILWD-103 Flowserve 65BAQ 1457 UTC-1078377 2005 Installed YES OPiping DPCo None None None Unk Corrected NO Piping DPCo None None None 2005 Installed YES

7. Description of Work NSM-ON-23106, Piping and valves downstream of Penetration 40 was replaced to upgrade from Class 3 to Class 2. In

,addition. a tee was added to allow tving into new BPI Pining.-

 . Test Conducted E] Hydrostatic     D  Pneumatic     El Nominal Operating Pressure El Exempt           1Z3 Other  *Performance test Pressure        60        PSI              Test Temperature        N.O.T. OF

41J. a*C I:. Fohn NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI _- j Work Order Number Sheet _2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) ._ Ad- . ,.

o Portion of LWD piping was xernoved with valves to upgrade pipiug to Class 2. O New LWDJHPI piping to CVs 2LWD-103 (2LWD-99 opn) Sand 21IP-973/974 tested at containment designpress C i, e CERTIFICATE CFCSOMPLACE vfI certify that the statements made k- the report are correct arnd that thiss conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed S AA;Leezd 4AA4 , Date 11 - 17- o5 Owner or Owner's Designee, Title CERTIFICATE OF INISERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Afoer// Zxee.e, .' and employed by HUIB C' of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 5-7 7- to .I/-.Z/ o 5 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described Inthis Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrarny, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Purthermore, neither the Inspector nor his employer shall be liable in any manner lbr any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions Al/ e-Inspector's Signature National Doard, Stat; Province, and Endorseineats Date _ _ - _Z,_ _ _ _ 1.d 1vd ; *I

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet

                                                                                                  = .   .

98705438 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/2/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed (StasmpNeod

_ (Ye o HPI piping DPCo None None None Unk Corrected NO

                      £                   I                   J.               4                      I         4-                   +

7. Description of Work NSM-23106 - Portion of piping connected to LDST was re-rated from 100 psig to 150 psig. The system operating pressure was not changed and no components were replaced. Existing components were evaluated for acceptability.

18. Test Conducted DHydrostatic Pneumatic Nominal Operating Pressure 3 Exempt ElOther H Pressure PSI Test Temperature OF

rI Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI i Wrk Sheet 2 of 2

9. Remarks (Applicable Manufacturcr's Data Reports to be attached) I -

0 T . .' eCr.. .__ _ .; A.M Coe Seto.I AsceCodeo Section XI.

                                   -CERTI1FICATE                     OF SEVCO  IANSPCEIO I etfyta   the unesigtedhednts        advaid     themireiont arsed boycta theatthis conarms tofthler anrequsurmesesfsth Cer signicat     Athorizartionce g             numbher       the        Apsplicablo   semployermksatinyD     arate notyexppicaedripid concrnin    theexOwnations awndrcorrecineTtivemesrsdsrbdithsOn'sRpt.Ftemoenihrte Inspectors nor the Stateoyr shroveinc leoinan mannr foan proalndjeryoyr brpry                            damag oralssoTn kind ahisiOne ros Reor duingth  et       perios inspection.e-~                                                    a      sat ta Inspector'nrsimpoe ShgallteuialeNianymnnrtoinypronalnuyor4 SttiProperty danag                   ,   1oralss of any oate

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI

                                                                                                             -    U Work Order Number                Sheet 98705438                      I of 3

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/2/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section Xl Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes 9 No) 2HP-939 Velan N 052011 None UTC-1078944 2005 Installed YES 2HP-940 Velan 052012 None UTC-1080398 2005 Installed YES 2HP-969 Flowserve 59BAQ 1451 UTC-1077003 2005 Installed YES 2HP-970 Flowserve 661BAQ 1453 UTC-1078373 2005 Installed YES 2HP-973 Flowserve 9 41BAG 1467 UTC-1076040 2005 Installed YES 2HP-974 Flowserve 44BAG 1406 UTC-1074811 2004 Installed YES 2HP-981 Flowserve 70BAQ 1462 UTTC-1078382 2005 Installed YES 2BP-982 Flowserve 64BAQ 1456 UTC-1078376 2005 Installed YES Piping Material DPCo None None None 2005 Installed NO

7. Description of Work NSM-23106 AM1 and work order 98705438 installed two MOVs , 4 manual valves, and two check valves with associated piping and fittings on the HPI system. Installed twelve (12) new supports for new piping and components. 0 Test boundary f%. Test Conducted F[ Hydrostatic ] Pneumatic 3 Nominal Operating Pressure FlExempt 0Other Pressure 66 min PSI Test Temperature N.O.T. OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98705438 2 of 3

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/2/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure System, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2-51B-1435B- DPCo None None None 2005 Installed NO H5560 Support 2-5 lB-1435B- DPCo None None None 2005 Installed NO H5561 Support D~

2-51B-1435B- DPCo None None None 2005 Installed NO H5562 Support DPCo None None None 2005 Installed NO H5561 Support DPCo None None None 2005 Installed NO 2-51B-1435B- DPCo None None None 2005 Installed NO 115564 Support D~ 2-51B-1435B- DPCo None None None 2005 Installed NO H5565 Support 2-51B-1435B- DPCo None None None 2005 Installed NO H5566 Support _ _ _ __ _ _ _ _ _ I__ 2-51B-1435B- DPoNone None None 2005 Installed NO H5567 Support D~ 2-51B-1435B- DPCo None None None 2005 Installed NO H15568 Support D~ 2-51B-1435B DPCo None None None 2005 Installed NO H5569 Support I

  '-51B-1435B-              DPCo                None              None               None            2005         Installed Ii*A5570 Support                                                                                                                       NO I  2-51B-1435B-115571 Support   I _

DPCo __I___I_ None I None None I 2005 Installed I NO

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI _ Work Order Number I Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I 98705438 1 3 of 3 0 The pressure testing covered by this NIS-2 covers new HP [ piping up to 2HP-98 1 and 2HP-982. The balance of the new HPI piping is part of the containment boundary and was testing with the LWD piping. NIS-2 included with this WO package. 0 e 0 e 0 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed Ja , .4 At- I-e's' ef1eep Date 1/ oS Owner or Owner's Designee, Title CERTIFICATE OF IINSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of koerlew L'eocL.A and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period J'/7-as to ,/Z/-'.'S ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions 416 / S<' /- c

              `-Inspor's Signature                                            National Board, State, Province, and Endorsements Date           //_ Z__Z_-__

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet _ 98705438 1 of 2

1. Owner 2. Plani Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 10/12/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Low Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No) 2LP-193 Flowserve 68BAQ 1460 UTC1078380 2005 Installed YES 2LP-194 Flowserve 59BAK 1438 UTC1074854 2004 Installed YES Piping DPCo None None None 2005 Installed NO Support 2-51B- DPCo None None None 2005 Installed NO 1435B-H5572 Support 2-51 B- DPCo None None None 2005 Installed NO 1435B-H5573 Supr -SIB- DPCo None None None 2005 Installed NO 1435B-H5574 Support 2-51B- DPCo None None None 2005 Installed NO 143513-15575 Support 2-5B1- DPCo None None None 2005 Installed NO 1435B-H5576

7. Description of Work NSM-23106AM1 and work order 98705438 installed two new manual valves in the LPI system. Associated piping and fittings were also installed. Installed five (5) new support restraints on new piping.

L - - - - - - -- - I. Test Conducted Hydrostatic a Pneumatic " Nominal Operating Pressure E Exempt LI Other Pressure 83.4 PSI Test Temperature N.O.T OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of ihe ASME Code Seation XI _ , Work OrNumer Sheet I % = 2 of 2

9. Remarks (Applicable Maufautsrr's astas Reports to be attaced) 0 I- - CERTIFICATE OF COMPLIANCE I certfy fI that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xi.

Type Code Symbol Stamp Not Applicable i Certificate of Authorization Number Not Applicable Expiration Date Not Applicable ii Signed Aog AA QGtu= Owner or Owner's Designeci Title Date ,l - Z / - CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of e e and employed rnSI by CT of Hartford> Connecticut have inspected the components described in this Owner's Report during the period _ _ -_ _ r _7-___ to /- Z/ 0-oS' and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. rtrCommissions Isco tC VJ/xse National Board, State, Province, and Endorsements Date LIZ

Form NIS-2 Owner's Report for Repair/Rteplacement Activity As required by the provisions of the ASME Code Section XI Work Order Number I Sheet 98693392-01 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiratlon Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Snubber 2 Lisega 61296/038 N/A N/A N/A Removed N/A 1478A-H6147 1478A-H6147 Lisega 61587/012 N/A UTC 1064697 UNK Installed N/A 1- 4 .- 44 4_ 4 4 I 4-- 4. 4 4 4

7. Description of Work Replaced Lisega snubber containing AK350 fluid with one containing AP280.

8. Test Conducted 2 Hydrostatic 2 Pneumatic R Nominal Operating Pressure j Exempt Z Other Visual Pressure _ PSI Test Temperature _ _ OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98693392-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xi. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed 4 AG O 3,*, Z,62: Date 1,/ /as

Owner or Ownef's Designee, lM1e CERTIFICATE 01 INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of 4,10,ecr, zoeLw, and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period b/ Z, -oa to /W'Z/.or , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any is kind arising from or connected with this inspection. Commissions _ _ __ _ __ __ _ Inspectors Signature National Board, State, Province, and Endorsements Date /2 Z' °*

Form NIS-2 Owner's Report for Repair/Replacement Activity ,As required by the provisions of the ASME Code Section XI

                                                                                                              -U Work Order Number              Sheet 98693392-04                    I of 2

1. Owner 2. Planit Unit Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by - Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Main Steam, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

Snubber 2-OIA Lisega 614150/001 N/A N/A N/A Removed N/A 148 13-1`813 Snubber2-14A Lisega 615853/089 N/A UTC 1085722 UNK Installed N/A 148IBI--H81

7. Description of Work Replaced Lisega snubber containing AK350 fluid with one containing AP280.

8. Test Conducted LI Hydrostatic n Pneumatic n Nominal Operating Pressure 1 Exempt 3 Other 'Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98693392-04 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed 4 & 2* g ,l K Date __ _ _ _ _ _ Owner or Owner's Designee, Ttie CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of loaxiV ZW.-,&AJo' and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ,//. - -' to - S' and state that

                                                                                                                     ,I/Z to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. __ __ __ __ __ __ __ __ Commissions A )E / hspector's Signature National Board, State, Province, and Endorsements D ate _ _ __ _ __ _ __ _ _

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI

-U.

Work Order Number Sheet 98720644-01 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Main Steam, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

New Miller cylinder on Miller 00051 N/AN/A JNK Removed N/A snubber 2-O1A 14011B-R14 _ Hydraulic snubber Anvil 36133 N/A UTC 1081181 UNK Installed N/A upgrade kit

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted D Hydrostatic LI Pneumatic LI Nominal Operating Pressure I Exempt 3 Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity ks required by the provisions of the ASME Code Section Xl Ace lWork OrdT CERTIFICArE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed Ai H i ap, A,4 Date _ _ _ _ _ _ _ _ Owner or OwneAs Designee, T'le CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Aloxrh 4'.eoL../Q and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /_ - 2,_ -____ _ to Gu- Z/ .- o< , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Inspector's Signature National Board, State, Province, and Endorsements Date _ _S_ _ _ _ _

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-02 1 of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Main Steam, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped v (Yes I No)

New Miller cylinder on Grinnell 18613 N/A N/A UNK Removed N/A snubber 2-01A 1481A-H8A _ Hydraulic snubber Anvil 35553 N/A UTC 1048578 UINK Installed N/A upgrade kit _

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted L Hydrostatic F]Pneumatic F]Nominal Operating Pressure LI Exempt M Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 98720644-02 I 2 of 2 0

0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are (correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed /Ae/; Date 1111,gP1' Owner or Ow er's Desig'ne'e, itle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A/otAo ' GeA1aL A- and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period //- to ,/- Z/ o0 s- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. G_,ffi, ,, I

           -cZims-pector's-Si-griature  -

Commissions ioe/* 1S/A 7/&.- National Board, State, Province, and Endorsements Date A/- Z__ _on _ _

Form NIS-2 Owner's Report for Repair/Rleplacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-03 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201 -1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Main Steam, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped P (Yes/INo)

New Miller cylinder on Grinnell 30996 N/A N/A UNK Removed N/A 1481B-H2A _ Hydraulic snubber Anvil 35594 N/A UTC 1050269 UNK Installed N/A upgrade kit _

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted Dl Hydrostatic F Pneumatic I Nominal Operating Pressure Rl Exempt Z Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/FReplacement Activity As required by the provisions of the ASME Code Section Xl _ Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I 98720644-03 2 of 2 0 e e 0 0 0 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed $o Date _ _ _ _ _ _ _ _ _ _ Owner or Owner's Designee, Tit CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A-Or,4 C and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period .i/-zo6 to ,/-Z/ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                     £                                  Commissions    tCi/~59           OAJ '--

Inspector's Signature National Board, State, Province, and Endorsements Date //-Z/ Or

Form NIS-2 Owner's Report for Repair/Rleplacement Activity As required by the provisions of the ASME Code Section XI - Work Order Number Sheet 98720644-04 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Main Feedwater, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

New Miller cylinuer 0-- Grinnell 18607 N/A N/A UNK Removed N/A 1480B-H6B _ . Hydraulic snubber Anvil 36135 N/A UTC 1081152 UNK Installed N/A upgrade kit

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted D

FHydrostatic [R Pneumatic FiNominal Operating Pressure L1 Exempt Other 'Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-04 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applj!cable Expiration Date Not Applicable Signed H o >,^Date 1111 leG Owner or -wner's Dsignee, Title~ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province Ofc:-,5^,f and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ou Z/. to /--, - Z/ - rS , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property clarage or a loss of any kin arising from or connected with this inspection. Commissions oCy=/sm Inspector's Signature National Board, State, Province, and Endorsemnents Date /- /o

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-06 1 of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Ap licable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

New Miller cylinder on Grinnel N/AN/A UNK Removed N/A snubber 2-50 148 1A-H7 _ Hydraulic snubber Anvil 36040 N/A UTC 1077063 UNK Installed N/A upgrade kit _

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted L Hydrostatic L Pneumatic El Nominal Operating Pressure Lii Exempt Other Vrisual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed 4 /zd- Date __________ Owner or Owner's Designeefritle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ae,79 b and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period to t/- o- /-/-o 5 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions I'Inspector Signature National Board, State, Province, and Endorsements Date /__ -_ _/_ -C_., __ _

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI - . Work Order Number Sheet 98720644-09 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Spent Fuel Cooling, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

New Miller snubber 56 Grinnell 18589 N/A N/A UNK Removed N/A 1478A-H 10 _ Hydraulic snubber Anvil 36126 N/A UTC 1081141 UNK Installed N/A upgrade kit

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted L Hydrostatic Li Pneumatic L Nominal Operating Pressure Li Exempt ZOther Visual Pressure PSI Test Temperature OF h

Form NIS-2 Owner's Report for Repair/Replacement Activity A's required by the provisions of the ASME Code Section XI CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed _ _ _ _ _ _ _ _ _ _ __ Date / Owner or Okner's Desiinee, -itle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of , :6~ and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ,// Tv to //- _ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions .JC W/A - 7linispector's Signature National Board, State, Province, and Endorsements Date z/-Z/lJo*

Form NIS-2 Owner's Report for Repair/R eplacement Activity As required by the provisions of the ASME Code Section Xl . Work Order Number Sheet 98720644-18 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: USAS 831.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes)I No)

Snubber 2-50 Grinnell N/A N/A N/A UNK Removed N/A 1480A-H9 Snubber 2-50 Anvi 35409 N/A UTC 1058400 UNK Installed N/A 1480A-1-9Ani350N/UC1080 UK IntleNA

7. Description of Work Replace the existing Grinnell snubber with a Config. A Anvil snubber

8. Test Conducted

[D Hydrostatic R Pneumatic [] Nominal Operating Pressure l Exempt Z Other 'Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xl Work Order Number I Sheet _98720644-1 8 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 e

0 0 e e 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed g 5 Date ___ __ __ __ __ Owner or r's Designee itle CERTIFICATE OF: INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,)w G and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /-/.-o$ to ,/- Z/-o 0 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions dc., -ous

                  -rsIaMpco'Sintre                                            National Board, State, Province, and Endorsements Date        // - Z'r- oi

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI ~ 1WW, rWork Ordlei -Number - U, Sheet I 98720644-19 1 of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class I 5.

(a) Applicable Construction Code: USAS 1331.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For RIR Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Snubber 50 Grinnell N/A N/A N/A UNK Removed N/A 1479A-H2A Snubber 50 Anvil 34149 N/A UTC 1082290 UJNK Installed N/A 1479A-H2A

7. Description of Work Replace the existing Grinnell snubber with a Config. A Anvil snubber

8. Test Conducted D- Hydrostatic 1 Pneumatic Nominal Operating Pressure EI Exempt Other Visual Pressure ________PSI Test Temperature F O______

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-19 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are (correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed > g 0!. * ' Date A / 6 Owner o lOwner's Desigde, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of 1/,,,e1r & and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period i'-L.'-o3s to ,/-el.oor , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions - /C9*'.d/A' S

             -`4ip      ctor's Signature                                      National Board, State, Province, and Endorsements Date      //-Z/-c'5

Form NIS-2 Owner's Report for Repair[Replacement Activity As required by the provisions of the ASME Code Section Xl IWork Order Number Sheet 98720644-20 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 (a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda.

(c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Snubber 50 Grinnell N/A N/A N/A UNK Removed N/A 479A-H3A. Snubber 50 Anvil 36146 N/A UTC 1081813 UNK Installed N/A 1479A-H3A Snubber Rod Eye Anvil N/A N/A UTC 1035572 UJNK Installed N/A

7. Description of Work Replace the existing Grinnell snubber with a Config. A.Anvil snubber

8. Test Conducted I Hydrostatic n Pneumatic LI Nominal Operating Pressure E Exempt Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xl CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed /4 <i(.d Owner or Owner's Design6, Title Date /____/ __ _ _ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Acet ewg and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period A. z.. o < to ,/- o 0- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions A2c 'V y'5 )/ . '4 9 'Ispecr'sSignature National Board, State, Provincc, and Endorsements Date / A- Z/-__ _

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-21 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Ap plicable

4. Identification of System, ASME Class High Pressure Injection - High Pressure Portion, ASME Class 1 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

Snubber 51A Grinnell 4846 N/A N/A UNK Removed N/A 1479A-H2A Snubber 51A Anvil 36148 N/A UTC 1082289 IJNK Installed N/A I1479A-H2A

7. Description of Work Replace the existing Grinnell snubber with a Config. A Anvil snubber

8. Test Conducted D- Hydrostatic L Pneumatic R Nominal Operating Pressure LI Exempt Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98720644-21 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

e CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Appli -able Expiration Date Not Applicable Signed -141 Ad.~ A,& Date s/6O Owner or Ov er's Designee Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AloerW> ,tsov and employed by HSB CT of Hartford, Connecticut have inspected the components describe-d in this Owner's Report during the period ,zoO to //- Z/ c, 0 _-, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with thei requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Fuithermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any qkind arising from or connected with this inspection.

                   ,,                                    ~~~Commissions     J     w      Y    )      S
                        ~cor's Signature                                         National Board, State, Provinc.- and Endorsements Date      /-    Z /-°0

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI -U Work Order Number Sheet 98720644-22 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Low Pressure Injection - High Pressure Portion, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

Snubber 53A Grinnell 5866 N/A N/A UNK Removed N/A 1479A-HIC Snubber 53A Anvil 36150 N/A UTC 1082291 IJNK Installed N/A 1479A-HIC Snubber Rod Eye Anvil N/A N/A UTC 1053974 UNK Installed N/A

7. Description of Work Replace the existing Grinnell snubber with a Config. A Anvil snubber

8. Test Conducted Hydrostatic R Pneumatic LI Nominal Operating Pressure l Exempt Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity

   %srequired by the provisions of the ASME Code Section XI

`IW I Work Ord(lr Number I Sheet . I 98720644-22 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

e 0 0 e 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed zew ; JUD Owner oi 1Owner's liesign&, Title Date __ _ _ _ _ _ _ _ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AJE-rJv .ez,,A-,o, and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period -. &- to -o ,and

                                                                                                                          ,-z state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions ,AC'% 4

4bS

                       -spector's Signature                                        National Board, State, Province, and Endorsements Date      v -2/-

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI . Work Order Number Sheet 98720644-23 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Bldg. Spray - Low Pressure Portion, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

Snubber 54B Grinnell N/A N/A N/A IJNK Removed N/A 1477-1_9A Snubber 541 Anvil 35543 N/A UTC 1051564 UNK Installed N/A 1477-H9A

7. Description of Work Replace the existing Grinnell snubber with a Config. A Anvil snubber

8. Test Conducted Hydrostatic LI Pneumatic 0 Nominal Operating Pressure L] Exempt §3 Other Visual Pressure _ PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI JWork Order Number Sheet 98720644-23 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 e

G CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applic-able Expiration Date Not Applicable Signed G i l Hi' ;4ffi - Date A// 10-A Owner or 0 ner's Designee, e CERTIFICATE OF: INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province Of >lo!^-

d~rv and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ,- ,O to A-z'/- O0f-s , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with thE~requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measurers described in this Owner's Report. Fuithermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions S / y A S

               -C aspector's Signature                                          National Board, State, Provinc.- and Endorsements Date     // "Z-o            f

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI L1w Work Order Number Sheet 98720644-24 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Bldg. Spray - Low Pressure Portion, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

Snubber 54B Grinnell 5069 N/A N/A UNK Removed N/A 1477-H-9B3 Snubber 54B Anvil 35507 N/A UTC 1051558 UJNK Installed N/A 1477-1-913

7. Description of Work Replace the existing Grinnell snubber with a Contig. A.Anvil snubber

8. Test Conducted E]Hydrostatic LI Pneumatic F Nominal Operating Pressure []Exempt 14~ Other Visual Pressure ________PSI Test Temperature OF______

Form NIS-2 Owner's Report for Repair/Replacement Activity A\s required by the provisions of the ASME Code Section Xl Work Order Number Sheet 98720644-24 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

e 0 e 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed _____ _____ ____ Date __ __ __ _ Owner or Oner's Deigne itle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Aw <,oV and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period to t-zo- ./- Z.'*-o C , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions _ _ _ _ _ _ _ _ _ _ _ _ _ _

                  -- twreetor's Signature                                    National Board, State, Province, and Endorsements Date     //-      2-1 -e 6

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI . Work Order Number Sheet 98720644-25 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Spent Fuel Cooling, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Snubber 56 Grinnell 4758 N/A N/A UNK Removed N/A I1478A-H9 Snubber 56 Anvil 35506 N/A UTC 1051557 UNK Installed N/A 478A-H9 Snubber Rod Eye Anvil N/A N/A UTC 1053974 UNK Installed N/A

7. Description of Work Replace the existing Grinnell snubber with a Config. A Anvil snubber

8. Test Conducted E Hydrostatic R Pneumatic Cl Nominal Operating Pressure R Exempt Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity Aks required by the provisions of the ASME Code Section XI i14tWork Order Number Sheet 98720644-25 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applic-able Expiration Date Not Applicable Signed / > l eDate /Ja161/01-Ow~ner or Own&'s Designiee,Te CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Alc,, ereo and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /-a/-O to / - Z/- S- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ____ ___ ___ ____ ___ _ _ Commissions a) '4X O/,)' ee._

                    'ctrsp         Signatre                                       National Board, State, Province, and Endorsements Date      //-      2 -o      --

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASMIE Code Section XI Work Order Number Sheet 98701272-01 1 of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Low Pressure Injection - Low Pressure Portion, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No) 7-j% Duke None None None 1970 Corrected N/A 1243&42 AX

7. Description of Work replaced bent hanger rod and installed new nuts

8. Test Conducted LI Hydrostatic n Pneumatic LI Nominal Operating Pressure L Exempt Other Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98701272-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to he attached) o Replace bent hanger rod (UTC 1054905) e Installed new nuts (UTC 1079284) e 0

e 0 0 I,, CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Date / -o Owner or Owner s Designee, Title CERTIFICATE OF' INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of t, and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 9f. Zf. s- to /aZ- 7. of , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions /c J/y4,, '- IIpeer's Signature National Board, State, Province, and Endorsements Date z- 7- o05

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI I Work Order Number Sheet 98719910 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/15/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure [njection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c)Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

NA" 2BP-17 valve Crane/Aloyco Unknown None N/A 1968 Corrected NO

                                                                                                        -=                 =       -=

7. Description of Work During inpection of the valve discs, Maintenance techs decided to replace the valve discs because of scratches.

8. Test Conducted MHydrostatic n Pneumatic [ Nominal Operating Pressure El Exempt E Other Visual Pressure PSI Test Temperature `F

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASvIE Code Section XI Work Order Number Sheet 98719910 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Valve Male disc - stock code 75943 - UTC 0000926870 0 Valve Female disc - Stock code 77050 - UTC 0000926869 0

0 0 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are orrect and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed Xt (I _

JMa@ Date c_ _ _

        /J            Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                             . n/, and employed by                     HSB CT of                                Hartford, Connecticut                           have inspected the components described in this Owner's Report during the period                    o1 -Ve-o5      to       0,-z o S-                  , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ZL Commissions __ _ _ _ _ _ _ _ _ __J__ _ 1-hspector's Signature National Board, State, Province, and Endorsements Date _ __ 7_

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASvE Code Section Xi Work Order Number Sheet _ 98719910-01 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/1/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section Xi Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xi Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Valve 2HP-17 Crane/Aloyco Unknown None N/A 1968 Corrected NO

7. Description of Work During initial inspection of the valve PM, maintenance techs found the bonnet studs and nuts slightly coroded

8. Test Conducted

[]ydrostatic n Pneumatic []Nominal Operating Pressure []Exempt Z other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI IWork Order Number Sheet 98719910-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Body-Bonnet Studs - Stock Code 467112 - ULTC # 0001006458 0 Body-Bonnet Nuts - Stock Code 313135 - UTC #0001074344 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are c orrect and that this conforms to the requirements of the ASME Code, Section XI.

Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed z/0/J- a fi$ccfDt A/ Owner or Owner's Designee, Title CERTIFICATE OIF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Jor?<et,¢ and employed by HSB CT of Hartford, Connecticut have inspected the oomponents described in this Owner's Report during the period /0 -. 31-0of to /Zz > and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

             ,            ~~~~Commissions                           J /<,St hispector's Signature                                        National Board, State, Province, and Endorsements Date   _Z_      7__          _z

Form N1S-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work OrderNumber Sheet

1. Owner 2. Plant I 98719296-06 Unit I of 2 Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/18/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class I 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2RC-68 Consolidated BL-08895 None None UNK - Removed YES 2RC-68 Consolidated BT-04976 None None 1979 Installed YES o Outlet Flange IJNK None None None UNK Installed NO Nuts for 2RC-68 Nuts for 2RC-68 UNK None None None UNK Installed NO Nutsfor RC-6

7. Description of Work Installed valve, serial number BL-08895, was removed for section XI testing. Replaced with previously tested spare, serial number BT-04976, from stock. Valve, serial number BT-04976 was removed from unit 1 and repaired on work order number 98693303. Replaced 24 outlet flange nuts and 16 inlet flange nuts due to being unmarked or unidentifiable.

8. Test Conducted LI Hydrostatic LI Pneumatic E Nominal Operating Pressure FI Exempt 3 Other RCS Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98719296-06 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 Outlet Nut Material - Stock Code # 131798 - UTC # 1057384 0 Inlet Nut Material-Stock Code# 131853 -UTC#s 1033140, 1033141, 1033144 and 1067856 e

0 e 0 0 0 0 qj.S CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed - H__ Sr. Engineer Date 11/18/05 Owner or Owner's esignee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of t,&r1oe.M/#l and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 7-Z0-- to 12./- of , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions A,1/2/4e

                    -fnmpctor'sSignature                                           National Board, State, Province, and Endorsements Date    'Z-7-'         5

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI

                                                                                                          -U Work Order Number              Sheet

1. Owner 2. Plant l 98693303 Unit I of 2 Duke Power Company Oconee Nuclear Station ONS - 0 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/17/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Apilicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class I 5.

(a) Applicable Construction Code: ASME Section III 19 65 Edition, 67 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Pressurizer Code Safety Valve Dresser BT-04976 n/a n/a 1979 Corrected YES (spare) _

7. Description of Work Replaced disc (UTC 1068294), serial number ADQ-63.

8. Test Conducted LI Hydrostatic IiNominal Operating Pressure FLPneumatic V3 Exempt Other Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98693303 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Replaced disc (UTC 1068294), serial number ADQ-63.

0 0-0w CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed -Zt? , Sr. Engineer Date 11/17105 Owner or Owner's Designee, Title CERTIFICATE OFINSERVICE INSPECTION 1,the undersigned, holding a valid commission issuecd by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ac !,A , adepodbyHBC of Hartford, Connecticut have inspected the components described in this Owner's Report during the period _ZO to /Z_ / a0 f , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the .Inspector nor his employer shall be liable in any manner for any personal injury or property dariage or a loss of any id arising from or connected with this inspection. I, taCommiss ions teational In spect or's Signature Provinc, National Board, State, and Endorsements Date -Z-/o .<

Form NIS-2 Owner's Report for Repair/R eplacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98719299-07 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant System, ASME Class I 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2RC-66 Consolidated BW-08706 none none UINK Removed NO 02RC-66 Consolidated BY93618 none none UNK Installed YES binlet flange UNK none none none LINK Installed NO

7. Description of Work Valve, serial number BW-08706, was removed for ASME section XI testing. Replaced with new spare valve, serial number BY93618. Installed new inlet studs and nuts due to spare valve having through hole inlet flange.

8. Test Conducted I Hydrostatic L Pneumatic Ei Nominal Operating Pressure LI Exempt 3 Other RCS visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98719299-07 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

                                                                                                                .0 I o   Replaced existing valve with a new spare from stock. stock code 550860, serial number BY9361/, UTC 1075070.

0 Inlet stud material - stock code # 318736 - UTC # 951541, Inlet nut material - stock code # 131853 - UTC # 1067856. 0 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed A _ Sr. Engineer Date 11/16/2005 a/ Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of , e>Co'w and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 7-Z'- ° to - Z-o - , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any maniner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

                    ,______   _____                _    Commissions              Y spector'sSignature                                        National Board, State, Province, and Endorsements Date      7Z-7-oi

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xl - Work Order Number Sheet 98712291 I of 2

1. Owner 2. Plant _ Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not App'icable

4. Identification of System, ASME Class Main Steam system, 2MS-153, ASME Class 3 5.

(a) Applicable Construction Code: USAS B31.7 19 68 Edition, 06/68 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 S Edition, 2er& Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

B to B_ studs/thread rod Energy Steel UTC 1077726 N/A sc# 29739r 1 *lon/ia Installed NO B to B nuts Energy Steel UTC 1077724 n/a Sc# 319298 n/a Installed NO 2MS-153 Crane UNK UNK n/a n/a Corrected NO __ a __-

7. Description of Work Replace body to bonnett bolting studs and nuts on 2MS- 153 valve. Replace Bonnett to Yoke bolting studs and nuts on 2MS- 153 like for like. All work completed under work order and existing plant procedures

8. Test Conducted

[] Hydrostatic E] Pneumatic LI Nominal Operating Pressure LI Exempt ,; Other ICI)C TIOCL Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number 98712291 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 0 e e 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Author' ation Number Not Applicable Expiration Date Not Applicable Signed___ 'we_ Date __ _ _ _ _ _ Owr or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of c G and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 7- 4 , or to 12 -A VIf _ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Fur:hermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions /AG1 Signature National Board, State, Province, and Endorsements Date , Z- /-go,

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xl Work Order Number Sheet 98670064-01 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/15/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class I 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Valve, 2RC-IV-58 KSB 1027469 193 stock code UNK Removed YES 305255 2RC-IV-58 KSB 460435/11 566 305255 1994 Installed YES 0Tube to Pipe Swagelok none none part number SS- UNK Installed NO Connector *810-1-16W

7. Description of Work Replaced valve with like for like replacement along with a tube to pipe connector.

8. Test Conducted LI Hydrostatic LI Pneumatic FI Nominal Operating Pressure n Exempt E Other Visual Leakage Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98670064-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Replaced valve 2RC-IV-58 with a like for like. Valve item number DMV-678, stock code: 305255, UTC #: 830821.

O Installed Pipe to Tube Connector. Stock code: 338571, UTC #: 1081948.

Pipe to Tube adapter is class 2.

0 0 e 0 0 ,0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed a / Sr.Engineer Date 11/15/2005 Owner or Owner's Designee, Title CERTIFICATE OF: INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of e and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period _- 7o ,- to 'Z- 7. or- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taker corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions <,/C2,4z 6er

             'W.spector's Signature                                              National Board, State, Province, and Endorsements Date    ;Z-     7'..-°5

Form NIS-2 Owner's Report for Repair/Replacement Activity "is required by the provisions of the ASME Code Section XI - m iW'. lWork Order Number Sheet 1 98715637-01 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/18/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

O detF UNK None None None UNK Installed NO Studs UKNn oeNn JK Isald N OInlet Flange UNK None None None UNK Installed NO Nuts

7. Description of Work Replaced inlet flange studs and nuts due to existing ones being lost or misplaced.

8. Test Conducted LI Hydrostatic E Pneumatic E] Nominal Operating Pressure L Exempt Z Other Functional Leak Test Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/R'eplacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98715637-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Inlet Flange Studs - Stock Code 297412 - UTC # 1074195 0 Inlet Flange Nuts - Stock Code 293556 - UTC # 1074343 0

0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization N mber Not Applicable Expiration Date Not Applicable Signed 4 ( Z Sr. Engineer Date 11/18/2005 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of- ,oerv , and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /__-__ to o , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _______________ _ Commissions _ __ __ __ ___ __ __ Inspector's Signature National Board, State, Province, and Endorsements Date 2- 7-or

Form NIS-2 Owner's Report for Repair/Replacement Activity 3 required by the provisions of the ASME Code Section XI I A Work Order Number Sheet 98719129-03 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/1/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 2820 1-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Steam Generator - Reactor Coolant System, Feedwater System, ASME Cl ass 1 5.

(a) Applicable Construction Code: ASME Section i1ll- 19 of Edition, S Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2B Steam Primary Hand B&W Canada 006K04 208 2003 Corrected YES Hole Hex Nut =_ _

A. Description of Work Replacement of 2B Steam Generator primary hand hole hex nut. U. Test Conducted El Hydrostatic n Pneumatic OI Nominal Operating Pressure EL Exempt ZJ Other Dressure L/9 sk' 1 A

Form NIS-2 Owner's Report for Repair/Replacement Activity 3required by the provisions of the ASME Code Section Xl Work Order Number Sheet 98719129-03 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Nut, Hex, Type: Heavy Hex, 1 1/4" - 8UN 2B, SA 194 Gr B7, Dimensional Standard: ANSI B 18.2.2, Stock Code 557797.

0 0 G 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed / Date _ _ _ __1_ _ h/wner or Owner's esignee, Title CERTIFICATE C)F INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of A/ae-. 'oZaA'. and employed by HSB CT

of Hartford, Connecticut have inspected the components described in this Owner's Report during the period, ,i--: ~- to ' . - ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with fe requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the tv nspector nor his employer shall be liable in any mariner for any personal injury or property damage or a loss of any Kind arising from or connected with this inspection. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ C om m issions _ _ _ _ _ _ _ _ _ _ _ _ _ pector's Signature National Board, State, Province, and Endorsements Date /2-<- OS

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI

                                                                                                          -q      --

Work Order Number Sheet 98705693 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 10/30/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class RCS, ASME Class 1 (a) Applicable Construction Code: ASME Section III 19 ' Edition, A/o Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda.

(c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No)

CRDM #63 Diamond Power UNK UNK UNK UNK Installed YES 08 CRDM hold FANP UNK N/A UTC 1056490 UNK Installed NO down bolts 3 1 (2 piece) nut FANP UNK N/A UTC 1075364 UNK Installed NO ring

7. Description of Work Remove CRDM #63 for ISI and re-install. Replace CRDM hold down bolts and nut ring with new ones per station practice for this component.

8. Test Conducted

[] Hydrostatic LI Pneumatic 3 Nominal Operating Pressure F Exempt n Other Pressure 2155 PSI Test Temperature - 532 OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number I Sheet _98705693 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o 8 new CRDM hold down bolts installed, old ones discarded per standard practice. Material SA-453, Gr. 660. UTC 1056490, (S/N's GN-6307, -6017, -6103, -6214, -5991, -6229, -6338, -6231) 0 1 new (2 piece) nut ring installed, old one discarded per standard practice. Material SA-320, Gr. L-43. UTC 1075364, S/N 9717-GN-84 0

0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Aut ion Number Not Applicable Expiration Date Not Applicable Signed _______ Date 10/30(1931 Owner) ver's Designee, Title

                            -t CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,AJac, 3 y G                             and employed by                     HSB CT of                                 Hartford, Connecticut                                 have inspected the components described in this Owner's Report during the period                            0/-
                                                                      - S'        tooo     ,         ',-                   , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions ,/C,'Sj >!5 l spector' s Signature National Board, State, Province, and Endorsements Date . ?-cf

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI - U Work Order Number Sheet 98757305 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 10/30/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date

_ Not Applicable

4. Identification of System, ASME Class RCS, ASME Class 1 5-. So- LAo (a) Applicable Construction Code: ASME Section III - 19 Jl Edition, /ro0 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda.

(c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes /No)

CRDM #41 Diamond Power UNK UNK UNK UNK Installed YES o8 CRDM hold FANP UNK N/A UTC 1056490 UNK Installed NO down bolts e 1 (2 piece) nut FANP UNK N/A UTC 1075364 UNK Installed NO ring . _= =_ a I S - U a a. U-

7. Description of Work IRemove CRDM #41 for internals repair and re-install. Replace CRDM hold down bolts and nut ring with new ones per L4station practice for this component.

8. Test Conducted

[jl Hydrostatic l Pneumatic M Nominal Operating Pressure [n Exempt n Other Pressure 2155 PSI Test Temperature - 532 OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number 98757305

                                                                                                                                'Shee 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o 8 new CRDM hold down bolts installed, old ones discarded per standard practice. Material SA-453, Gr. 1560. 6 from UTC 1056490, (S/N's GN-5998, -5978, -6187, -6261, -6247, -6279, -6280, -6023) 1I new (2 piece) nut ring installed, old one discarded per standard practice. Material SA-320, Gr. L-43. urc 1075364, (S/N 971 7-GN-79) 0 e

0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed _ _ _ _ _ _ _ _ _ _ _ _ _ _Date 10/3012005 Owner or gner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AV ,ez~jv and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /__-o __ -a

                                                                             -          to    .2   - 7.cr-                      , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. W. II Commissions

                   --   ilnspecti xo's Signature                                          National Board, State, Province, and Endorsements Date 7--°<f

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI - U Work Order Number Sheet 98757346 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 10/30/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class RCS, ASME Class 1 5.s'v 7 ,,hrhs (a) Applicable Construction Code: ASME Section III 19 65 Edition, -#A*' Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda.

(c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Reactor Vessel Head o Stud #29 B&W 204-51-29 N/A J0e = Removed NO B&W 204-51-62 N/A A T'c 812ti0 Installed NO 0 Stud #29 _

7. Description of Work Replace reactor head stud at stud location 29.

-JQ

. 8. Test Conducted n Hydrostatic [] Pneumatic Z Nominal Operating Pressure LI Exempt L1 Other Pressure 2155 PSI Test Temperature - 532 OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI _ Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 98757346 I 2 of 2 0

0 0 0 e 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authoriation Number Not Applicable Expiration Date Not Applicable Signed __________ Date 10/30,/2005 Owne ) ner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AJoxey - and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period /B. / -o r to lz- 7-ps- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions /9o 'wA'4 c

                    -Tn-spector's Signature                                          National Board, State, Province, and Endorsements I  Date     ___-___7         _____

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI IWork Order Number Sheet 98720378 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/2/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Valve Tag # 2LP-28 in the LPI System, ASME Class 2 5.

(a) Applicable Construction Code: ASME Section HI 19 68 Edition, 06/68 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

B/Bvstuds&onuts UNK N/A N/A N/A N/A Removed NO Installed New Het#195 IJsn TC# Isald N 7/8" B/B studs Mackson Heat #719550 0001081618 l l Galled NO Installed New Mcsn Heat Code# IJTC# NA Isald N 7/8" B/B nuts JSY 0001076713

7. Description of Work Replace body/bonnet studs and nuts on 2LP-28. Work completed under work order and existing plant procedures He .. .

8. Test Conducted aI Hydrostatic LI Pneumatic [1 Nominal Operating Pressure LI Exempt 3 Other FN Leak Check Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASMUE Code Section XI JR t CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xi. Type Code Symbol Stamp Not Applicable Certificate of Authorization Numbef Not Applicable Expiration Date Not Applicable Signed

              ;0
                ,        AD we S

r'wcV _ T

                                             ~sgeTte7 f

tc !7 Date //- ?- la __o _ CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of o ,wVou_4' and employed by HSB CT Of Hartford, Connecticut have inspected the components described in this Owner's Report during the period A/_ 9 to /Z a0 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures; described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions Inspector's Signature National Board, State, Province, and Endorsments Date I I

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI . . _. . Work Order Number Sheet 98757040-03 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/9/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.-

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Valve -2HP-31 Fisher 4768610 None None 1969 Corrected NO

7. Description of Work Work Order # 98757040-03 was written for a seat leak. The valve plug/stem assembly was replaced.

8. Test Conducted Hydrostatic 2Pneumatic LI Nominal Operating Pressure R Exempt " Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI I Work Order Number Sheet 98757040-03 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Valve plug/stem assembly, Stock code # 18079, UTC # 0001078058 0

Q 0 e CERTIFICArE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable S igned'U.. No £X 1 -ztc 5zds Date / / /5 Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of >6 e;I CA 7zlWe and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period r 0Z^32 to AZ.-S-C r- , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions Ak /11 'C//s)Ar Inspector's Signature National Board, State, Province, and Endorsements Date _ _ _ _ _ _

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98719909-01 1 of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/1/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.-

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section Xi Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Valve 2HP-18 Crane/Aloyco Unknown None N/A 1968 Corrected NO 7.Dsrption of Work During initial inspection of the valve PM, maintenance teclis found the bonnet studs and nuts slighrtly coroded Test Conducted [1 Hydrostatic L Pneumatic n Nominal Operating Pressure L Exempt EjOther 'Visa Pressure PSI Test Temperature OF U

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI _ Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I 98719909-01 I 2 of 2 0 Body-Bonnet Studs - Stock Code 467112 - UTC # 0001006458 e Body-Bonnet Nuts - Stock Code 313135 - UTC # 0001074344 0 e 0 e 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed G J._ Date - / ____ 7/ Owner or Owner's Designee, Title CERTIFICATE 01: INSERVICE INSPECTION 1,the undersigned, holding avalid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of e C~c4vo and employed by HSB CT of Hartford, Connecticut have inspected the components describe(I in this Owner's Report during the period /c - < to _ ___ ___ , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions

                - xrupctor's  Signature                                        National Board, State, Province, and Endorsements Date       /Z       8- '5-

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI I Work Order Number Sheet 98720097-01 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/8/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: ASMESectionIII _ o1986 Edition, 1988 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Valve-2HP-120 CCI 706571-1-1 None None 1998 Corrected No

7. Description of Work Work Order 98720097-01 was written for the valve PML During the PM, Maintenance techs identified that the spindle was damaged from the flow conditions.

8. Test Conducted

   -    rI Hydrostatic     n   Pneumatic      LI Nominal Operating Pressure L     Exempt     X:]       Visual Pressure   __     __      PSI             Test Temperature                 OF

I Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI I 1 Work Order Number Sheet 98720097-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 Valve spindle. serial # 600346. Duke Stock Code # 486801,. UTC # 0001085423 0

e 0 e 0 0 0 '0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signe ae<2t gogl- *4e+ Date /I/ /

        //'            Owner or Owner's Designee, Title

_ I CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Atb - 6weo~s4V and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period ./.or to /Z- -e. , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from o onnected with this inspection. Commissions Inspector's Signature National Board. State, Province, and Endorsements Date _ z-_ _-_ _ _

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xl - Work Order Number Sheet 98693392-04 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/16/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Main Steam, ASME Class 2 5.

(a) Applicable Construction Code: USAS B331.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

Snubber 2-01 A Lisega 614150/001 N/A N/A N/A Removed N/A Snubber 2-0 IA Lisega 615853/089 N/A UTC 1085722 UNK Installed N/A

7. Description of Work Replaced Lisega snubber containing AK350 fluid with one containing AP280.

8. Test Conducted E1 Hydrostatic E1 Pneumatic Pressure __ __PSI al Nominal Operating Pressure E Test Temperature Exempt Z Other Visual OF

   ,rm NIS-2 Owner's Report for Repair/Replacement Activity

,,s required by the provisions of the ASME Code Section XI Work Order Number Sheet 98693392-04 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed _ #%

                /_                   r's       46ftis Owner or Owifer's Designee, fritle Date                             _______

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AvoAw wG2AAJ and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period //. 2/- r to o Z - 0o so , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. ____ ___ ___ ____ ___ _ _ Commissions A) /Y '/ )/ Ad& nspector's Signature National Board, State, Province, and Endorsements Date //-__ _ 5_

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI - U Work Order Number Sheet 98656689-01 I of 2

1. Owner 2. Plant Unit 2 Duke Power Company Oconee Nuclear Station 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 12/19/2005

3. Work Performed by Type Code Symbol Stamp Not Ap 31icable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No)

New Miller cylinder on Grinnell 18597 N/A N/A UNK Removed N/A snubber 50 1481A-HI _ Hydraulic snubber Anvil 35407 N/A UTC 1042692 UNK Installed N/A upgrade kit

7. Description of Work Replace the existing New Miller cylinder witrh a Anvil Config. A

8. Test Conducted DHydrostatic R Pneumatic F]Nominal Operating Pressure LI Exempt 3 Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/R'eplacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet 98656689-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) 0 0

0 0 e CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed j i Date 'z// i/05 Owner or Owner's D Ignee, Title CERTIFICATE OF: INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AJo er,'v Geo , and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owners Report during the period Li-'go.r to ,Z- Z -e.I , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. _ _ ___ Commissions /'A'/Adc Inspector's Signature National Board, State, Province, and Endorsements Date '"o

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xi I Work Order Number Sheet 98719745 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 111/20/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class High Pressure Injection, ASME Class 2 5.

(a) Applicable Construction Code: USAS B331.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2HP- 16 valve Crane/Aloyco Unknown None N/A 1968 Corrected NO

7. Description of Work During inpection of the valve discs, Maintenance techs decided to replace the valve discs because of scratches.

8. Test Conducted Hydrostatic El Pneumatic Ei Nominal Operating Pressure LI Exempt 0 Other Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section Xil Work Order Number Sheet 98719745 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Valve Female disc - Stock code 77050 - UTC 0000926869 0

0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of A thorization Number Not Applicable Expiration Date Not Applicable Signed ____ Date / M1 / d_ _ 77~wner or Owner's Designee, Titifi CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Agber 6v,&ed6'.t and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period / o to - ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions /'/kdc-

         ~--'     Inspector's Signature                                       National Board, State, Province, and Endorsements Date      /-J3-O6

FORM IS OWNERS RPOJIFR PARs OR REPLACEMENS I As Requrd By The Provistons Of heASIE Cod Section1

                                                                                                                                                                                          - -      -  . i-

1. Owner Duke Power Company 1a. Date C6Y-1/3-0SL Addre 528 Church Set, Chalotte, NC 28201I1006 Sheet -L of J

2. Plant Oconee Nuclear station Addres5 7800 Rochestsr Hwy. ¢Sae S.C. 29672 2a. Unh 01 03 O Shared (spe* U^, )

Sa. Work Order # ___ ______

3. Work Performed By Duke Power Company Repair Organiation Job #

Address 52 .8.Church Street Chroth, NC 28201-1008 Type Code Symbol Stamp WA Authoflwao No. WA Eqplraton Date WA 3b. NSMorMM# A//4

4. Identfficaton of Systems 51/4 Led/ J1 CWWn

s. (a) Appucable Consction Cole4 (b) Andab Ed uonof Seion Z 3 / 1 Umd for epr or Replacemn 1989oAddenda Z Eo Addenda, KJ/a Code Cases 41992 tshou 1.992 Addenda for C14.s NO and

6. Identicaton of C opnet Repalrd orepued and ReplemtCmnets Columnf IolwmZ CoCU= Cohn 4 OUWS 0OI.6 CCU=? cow=$

Mauatue atIonal MMt Year ASIA! Code Name of Component Name of ace Number Board Ide aon Bunlt ySedorno) A <2-O//9-0OX Re o N No

     /4706-/      11M                                         .RN0                                     pO00Reard 110                                                             I=lO~           [0Nyestg C                                                                                                                                                                     ORepalred             O c                                     _  _ _ _ _ __ _    _  __ __  _ __ _ _    __ __ _   _  _ _ _ _ _    _ _    _   _ _   _  _    _   _ _   _ _  _   _   _ _      -   80Replaced Rebtacement               0)No Yes 0 Repio                         No D                              .Repalaed                                                                                                                                                        O    No

__ __ __ _ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - Reblace mnent U Y es 0 RepaiNo 0 Rep W Oyes El F ORelaced of2

                                                                                                             -   _     _   _       __      _   _    _     _               R                      0 yes Page I of 2

Form NIS.2 (Back) NOTE: Supplemental sheets In form of lists. sketches, or drawings may be used, provted (1) size s 8 112 in. X11 In. (2) Information In Items 1 through 6 on this report is Included on each sheet aod (3) each sheet Is numbered and the number of sheets Is recorded at the top of thits form.

7. Dscripto WO orf &2s11D4) &456W iM ct2 -014.-0-/41/01 °v'7'

8. Test Conducted 0 "tostaft 0 Pneumatic 0 Nominal Operating Pressure 0 Other I Exempt' Pressure _____psig Test Temp. OF Pressure __ps Test Temp. OF Pressure psig Test Temp. *F

9. Remaks S/M I

(Appflcable Manufacturet's Data Records to be Attached)

>1*                                         CERTIFICATE OF COMPLIANCE We ctify at the statements made In the report are conrect and this repaIr or replacement confoins to the rules fithe ASME Codo, Secion XI.

Wpe Code Symbol Stamp WA No. WA - Expiration Date WA 8- od(( /t Da taSm-Z2AU CERTIFICATE OF INSERVICE INSPECTION I.the Uoderaigned, holding a valid by the National Board of Boger andPqre Vessel pectors and t State or Prorid eof / U --- -and employed by -_ C7 have Inspected the components described In t Owners Report durt the period -/V.?,o that to the best of my knowledge and belief, the Owner has perormed examrnation and takeIn this Owner's Report In accordance wdth the requiroments o the ASME Code. Secflon Xl. ES inlng this cerlificate, neither the Inspector nor his employer makes any warranty, expressed or h1plied, N¢l9 the Oxamatjons and corrective measures dscrbd In tis Owners Report. Furthermore, neither the o~r nor his employershall boe iable In any manner for any personal injury or property damage or a loss of any idan from or connected with this Inspection. mi/ssions_ National Board, State. Providence and Endorseme nts Date^ 0r lntr ot tnI 2

11-FOPR NIS'2 OWHEIR'S DPDM D D4 O REPILACEMI. 9 tI As Requtrd By The Provistobs Of Th@ ASME Code Section X 64&4ze*z'

1. Owmer DukePowerComny la. Date fi/z=

Addrss 528 Church Sr, Charotte, NC 2820t1006 Sheet / ot ,/-

2. Plant Oconee NuclearSttion Address 7800 Roclester Rwy. Suee"a S.C. 29672 2a. Unt 03 0 Shared (spe Un )

3a WorkOrder# 96'6Z7-3'1- o/

3. Work Perforned By Duke Power Company RepaIr Organization Job #

Address 628 Church Stret Ca t NC 28201.1008 Type Code Symbol Stamp WA Autahoon No. WA Expkaton Date WA 3b, NSM or MM # /V/

4. Identiflcston of System.. 4-' A fy*E ;$.d

5. (a) Applicable Conscon 7 19c Addenda, Coda Cases (b) Appcable Edion of con UtMzodf RepairsorRepl mt 1989, NoAddenda 41992 tbl-cugh 1992 Addenda for Class MC and CC and tbeI? suppotS.

6. Identcaton of Conents Repaired or Replaced and Replacement Components Columnl coma 2 CIou COW lm4 (5 Io6 Ock 7 COW= S atoYearpird,cumcurr ASM"!Code Name of Component Name of Msnufacture b Board IdentieaRon l eBulot Stamped

_ __ __ __ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ Num ber ubM NU e l c me t ( e o r no) A ZRep-7'd -. ORe 0No O_ R__cement _ 0 Yes C .eORed O No 0 Repl_ e

                                                                                                                 .                                 -       Retnt              O    Yes C0                                c                                                                                                                   n0 o Replacd Repad                  No
                                                                                                                                                    -0     Retament            0   Yes D                                                                                                                   0 Repkwrd D                                                                                                                    ORepalaed              ONo 0 Repabod

_ _ _ _ _ __ _ __ __ _ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 0 R e ~ac m ent0 Ye s 0 Repaw reN Fl .p d l NoI 2

                                                                                                                                                                           ~Page 1   ol12

Form NWS-2 (Back) NOTE SuPPlemental sheets In forn of fists, sketches, or drawings may be used, provlded (1) size is 8 1/2 in x 11 In. (2) Information In ftem3 1 through 6 on this report Is Included on each sheet ancd (3) each sheet Is numbered and the number of sheets Is recorded at the top of thls form.

7. Description of Work 4 AEW'W7'

-/.

A- /Ag7> r 4 4Je /a kr

8. Test Conducted: 0 1-1dtostatic 0 Pneumauc 0l Nominal Operating Pressure (OOther EaEempt Pressure psig Test Temp. F Prssure pstg TestTemp. *F Pressure psig Test Temp. F

9. Remarks (Appilcablo Manufacturers Dat Records to be Attached)

CERTIFICATE OF COMPLIANCE Wo cery that the statements made In the report are corre:t and ths repalr or replacement conformes to the nXic of the ASME Code. Seco Xi. Type Code Symbol Stamp WA ertfte of Authorzation No. WA Expiration Date WA SMen a,.0 ig-rtZ/f ;ZZae/ eDate Ownr Owrner '8 Ise .il CERTIFICATE OF INSERVICE INSPECTION I, the undersI ned holdt a vaSd bssed by t Natonl Board of Bolor and P essol Pctors and theState or Provfdence & and employed by

 -,              -      have Inspected the components desc d Inthls Owners Report during the peW I oJN and stato that to the best of my knowledge and belief, tho Owner has performed examlnaotns and odonasvermoasures descibed In tis Owners Report hI accoorance with the requtroments of the ASME Code.

y on this certifcato, neither the Inspector nor his employer makes any warranty, expressed or Iplied. W"MV the examinatns and corrective measures descriel hI ti Owners Report Furthermore, neither the nor his employr lhd be fiable I any manner for any porsonal Injury or property damage or a k ss of any WD from or connected with this Inspection. Co issosR FL/ 2 AS ---- sii S ture Natial Brx ite'.Povnp and Enosm ents

'te__________

0o 012

FORM MIS.2 OWrNyE REo PS R4 IW- Or REPLACEMNTS f As Roqtlred By The Poisn Of The AMEI Code Secton )a

1. Owner DukePower Compny la. Dato II1- iia _q Addres 52 S. Church Street, Chatotte, NC 28201-1006 Sheet L of° -

Z Plant OconeelNucleartation Address 7800 Rochester Hwy. Sdnecaj 8.C. 29672 2a. Unit 01 Os O Shared (specyunts ) 3a Wok Order # ,

3. Work Performed By Duke Power Company Repair Organizaton Job #

Address 52 8. Church Stree Charlott, NC 2821-1008 Type Code Symbol Stamp WA AuihoftFaon No. WA plration Daoe WA 3b. NSM or MM #, tlI1

4. Identffication of Systemty Oe.4j CftAass s

5. (a)AppUcable Constr.t7onCode 3 7 19- - Addenda,. CodA CAsAs (b)Apptableio of S on Utilzed for Repali or Replacement 1989, NoAddenda (1992 throush 1992 Addenda for Class MO and CC ad to~fx C sppooa.t

6. Ident~fcton ot Componens Repaired or Repae and Replacement Components column I COW= I oua ( Ooumn-6 I oumns I call Ooma? I Column i ManfatuerRSe~SIrv ASUH Code Name of Component Name of anufer l ft Number Identcation Btilt Re i or Stamped

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _~~~ _ _ _ _ _ N me _ _ _ _ _ _ _ e~ e e t ( e O M__or n o) A . Re . y A ______ I \t__O 24Z-'Ps /ft- _o B OO nt O Yes IORepad O No B O Replaced 0 Replaceent d Yes Repared _ 0 ONo E .~pio OOPo _ : F 0ORepalaed Rephaement gOpReplod 0 Yes ONo Pge Yes 1of

Form NIS-2 (Back) ..i NOTE: Supplemental sheets In form of lsts, sketches, or drawings may be used, provide (1) size is 8 112 In. x 11 In. (2) InformatIon In Items 1 through 6 on this report Is Included on each sheet and (3)each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. DesOripton ot Work. i Vi #' ck A A-. t-t. ek , Z \

8. Test Conducted: 0 HydcostaUc 0 Pneumatic 0 Nominal Operating Pressure 0 Other I7 Exet Pressure psig Test Temp. . _ *F Pressure psWg Test Temp. OF Pressure pstg Test Temp. _O*F

9. Remaut //A (Applicable Manufacturees Data Records to be Attached)

CERTIFICATE OF COMPLIANCE eo if thatWhe statements made In the report are correct and this repair or replacement confonrs to the nre Of the ASME Code. Section Xl. Type Code Symbol Stamp WA Cetficate of Authorization No. WA Expiration Date WA B6giSod &A-.5Pec'av/.z: 7'~ DateZo-A - O / Owner or Owner'8 Desgne Tite CERTIFICATE OF INSERVICE INSPECTION I. the uOderslgned hodit a valid com Issued by the Nadwona Board of Boller pdPserOVasesl tors and the State or Prodence o f E)A and emploed by - have inspected the components descried In th Owners Report durn the pOriod U State that to the best of my knowledge and belief, the Owner has performed examlnal"on kWnd and 0 COreW measures described hI this Owner's Report In acooodance with the requiroments of the A5ME Code. ctiton XI. BY $n9gthis certificate. neither the Inspector nor his omploew makes any waranty, expressed or Implied. W~rt* the examinations and corrective measures dscribod In is Ownes Repor Furthermore, nolehr the trnor hiemployer h be liable In arny manner for any personal Inwuy or property damage or a loss of any dafthIng from or connected with this Inspection. Corruissions CZ 12 4/ A4 A.§X 9 A ftnature Nat I r te, P an rm ents It/o____ a*^^ 7 ViC

U , I: FORM NIS-2 OWNER'S REPORT FOR REPAIRSgOR REPLACEMENTS As Required By The Provisions Of The AS/E Code Secion X II . .. . .

. I

1. Owner Duke Power Company :

ia: Date ' 2 I ,J7 Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet L. .

of of J -

2. Plant I Oconee Nuclear Station Address 7800 Rochester Uwy. Sdnecai S.C. 29672 2a. Unit 01 03 O Shared (specify Units .. )

3a Work Order # :?,e3-

3. Work Performed By Duke Power Company .Repair Organization Jqb #

Address 526 S. Church Street, Charlotte, NC 2820141006 Type Code Symbol Stamp WA Authorization No. WA ExpImation Date WA 3b. NSM or MM#__ ___I A. Identifinntinn

         . ~w z -- wu e -.

of AvqtArm _ - am.. L? I c~tm __ _i

5. (a) Applicable Construction Code B 31. 19AL EditionR- 69 Addenda. _Code Cases (b) Applicable Edition of Section Xi Utilized for Repalrs or Replacements 1989, NoAddenda <(1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identification of Components Repaired or Replaced and Replacement Components Column l Column ; I Column 3Column4 ColunS I Col Columni I Column 8 Page 1 of 2

Form NIS-2 (Back) it\} NOTE: Supplemental sheets Inform of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 In. x 11 In. (2) Inforimation In Items 1 through 6 on this report Is Included on each sheet, and (3)each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Desrption Of WIo; aL~s..L &I .eN c..-..& : .1~z ss-(\ .k L----

8. Test Conducted: 0 Hydtostatlc 0 Pneumatic E Nominal Operating Pressure 0 Other Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. °F Pressure _ prig Test Temp. F QgRAmjarkn

I-32A,,o_ W~ore&.C Av.WL\t~ - i LVCWZ Q(nC).S I 4KI 'AS LC-7(L (Applicable Manufacturmers Data Records to be Attached)

                                 -               CERTIFICATE OF COMPUANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp NWA Certificate of Authorization No. NWA Expiration Date N/A Signed- iI c e'>c<\ Ries I Datea L2Jl i Owner or Owners Designee, Title CERTIFICATE OF INGIERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of AJA7?"6-e'A"v and employed by c /oYS' have inspected the components described in this Owner's Report during the period <'-te4*> to 'Z 3- and state that to the best of my knowledge) and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Repoirt in accordance with the requirements of the ASME Code, Section Xi. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described in this Owner's Report FurthenTme, neither the Inspector nor his employer shall be liable In any manner foir any personal injury or property damage or a loss of any kind arising from or connected with this Inspection. 1 _ Commissions A/C/ t9<v5J-Inspector's Signature National Board, State, Providence and Endorsements Date /Ze- °c I a Page 2 of 2

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI -U Work OrderNumber Sheet

                                                                                .           98693302                      I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 0 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/17/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class 1 5.

(a) Applicable Construction Code: ASME Section III 19 65 Edition, 67 Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I NO)

Pressurizer Code Safety Valve Dresser BL-08890 n/a n/a 1970 Corrected YES (spare) _

7. Description of Work Replaced disc (UTC 1068296), serial number ADQ-65.

8. Test Conducted

[I Hydrostatic :1 Pneumatic LI Nominal Operating Pressure Exempt L1 Other Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/leplacement Activity As required -by the provisions of the ASME Code Section Xl Work Order Number Sheet 98693302 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o Replaced disc (UTC 1068296), serial number ADQ-65.

0 e CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are (correct and that this conforms to the requirements of the ASME Code, Section XI. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signedr2wnrs~sgne - TitleQ Sr. Engineer Date 11/17/05 CERTIFICATE 01: INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province Of Act, ,er,,V G~-> and employed by HSB CT of Hartford, Connecticut have inspected the components described in this Owner's Report during the period 7- ?-8 ->, SI to o- _ f ,and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Fuilhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damnage or a loss of any kind arising from or conne ted with this inspection. 5 ~~~~Commissions vz;PJ s W

                   '-"-  or's Signature                                         National Board, State, Province, and Endorsements Date      / Z/      -or

Form NIS-2 Owner's Report for Repair/R'eplacement Activity As required by the provisions of the ASME Code Section XI I Work 'Order Number Sheet 98719295-04 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date Charlotte, NC 28201-1006 Seneca, SC 29672 11/17/2005

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class Reactor Coolant, ASME Class I (a) Applicable Construction Code: USAS B31.7 19 69 Edition, No Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda.

(c) Applicable Section Xl Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes / No) 2RC-67 Consolidated BL-08891 None None 1970 Removed YES 2RC-67 Consolidated BL-08890 None None 1970 Installed YES

7. Description of Work Installed valve, serial number BL-08891, was removed for section XI testing. Replaced with previously tested spare, serial number BL-08890, from stock. Valve, serial number BL-08890 was removed from unit 1 and repaired on work order number 98693302.

8. Test Conducted E Hydrostatic LI Pneumatic l Nominal Operating Pressure El Exempt Other RCS Visual Pressure PSI Test Temperature OF

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions of the ASME Code Section XI Work Order Number Sheet

9. Remarks (Applicable Manufacturer's Data Reports to be attached)

I 98719295-04 2 of 2 0 0 0 0 0 0 0 0 0 CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xl. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed 7 6/ / Sr. Engineer Date 11/17/2005

              <I      Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Al,-.erl, ef404             ja        and employed by                    HSB CT of                                 Hartford, Connecticut                            have inspected the components described in this Owner's Report during the period                7-Z__ _-or_          to       /<Z-/-o'r                      ,  and state that to the best of my knowledge and belief, the Owner has performed examinations and taker corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Rdport. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. __ _ g___ _ __ __ _ _ Commissions _ _ _ _ _ _ _ _ _ _ _ Mi6yector's Signature National Board, State, Province, and Endorsements Date /2- c.;.n-.

Form NIS-2 Owner's Report for Repair/Replacement Activity As required by the provisions ofthe ASME Code Section XI . ! Work Order Number Sheet <j3g 98732127-01 I of 2

1. Owner 2. Plant Unit Duke Power Company Oconee Nuclear Station ONS - 2 526 South Church Street 7800 Rochester Hwy Date K Charlotte, NC 28201-1006 Seneca, SC 29672 2/9/2006

3. Work Performed by Type Code Symbol Stamp Not Applicable Duke Power Company Authorization Number 526 South Church Street Not Applicable Charlotte, NC 28201-1006 Expiration Date Not Applicable

4. Identification of System, ASME Class 3 See. 9J.fevvmArk5 High Pressure Injection system, Letdown Cooler, ASME Class I o Shee+ 2 of 2 5.

(a) Applicable Construction Code: ASME Section III 19 80 Edition, Sum. 8O Addenda, No Code Case (b) Applicable Edition Section XI Utilized For R/R Activity 19 98 Edition, 2000 Addenda. (c) Applicable Section XI Code Case(s) None

6. Identification of Components Name of Name of Manufacturer National Other Year Corrected, ASME Component Manufacturer Serial Number Board No. Identification Built Removed, Code or Installed Stamped (Yes I No) 2A LetdownGrhm--

CooleManufacturing 44773-1 12767 None 1983 Removed YES Cooler (1) ~C orp.__ _ _ _ _ _ _ _ _ 2A LedownGraham oow Manufacturing 44773-2 12768 None 1983 Installed YES Cooler (2)C i *h - h I I 7. Description of Work \ 1 ,"Replacement of 2A Letdown Cooler with used spare cooler of same design.

8. Test Conducted FII Hydrostatic FII Pneumatic LI Nominal Operating Pressure Ei Exempt 3 Other functional leak check Pressure PSI Test Temperature _ OF

Form NIS-2 Owner's Report for Repair/Replacement Activity Ns required by the provisions of the ASME Code Section Xl Work Order Number I Sheet 98732127-01 2 of 2

9. Remarks (Applicable Manufacturer's Data Reports to be attached) o N-i attached for S/N 44773-1 0 N-i attached for S/N 44773-2 e

0 o + Crorn Sheetr oA 2; This NS-z WQS ori0Hinall1 prepared on o ukilc .lby 6 e ror& S\j iden4ied tWy ASIAE cliss a the 0 SLsevm (ie; 4) QS Class 3 WIhen il should have- been 'C lass 1"1 Thi5N's-2 is beiiq regene ¢ e44 i1e error-corrlc Ref% IF>6O ^ '00 i~ CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the requirements of the ASME Code, Section Xi. Type Code Symbol Stamp Not Applicable Certificate of Authorization Number Not Applicable Expiration Date Not Applicable Signed WSz & Engineer Date 2/912006

           <J          Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ,06 ,                   ,7             and employed by                     HSB CT of                    '            Hartford, Connecticut                              have inspected the components described in this Owner's Report during the period                   lo- R7 - _-         to               zs-Z-.      <             , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. Commissions H 1Inspector's Signature National Board, State, Province, and Endorsements Date _ _ _ _

A ,(T 2

                                                                                                    's I STEAM GENERATOR PRESERVICE WELD EXAMINATION Modification Package No. Work Package No. Work Order No.          Field Weld No. ISI Class  Preservice NDE ON 23086 AM1             23080A        98516356       2MS-01 24-68V               2    VT, MT, RT, UT ON 23086 AM1             23080A        98516356       2MS-0124-69V R6            2     VT, MT, RT, UT ON 23086 AM1            23080A         98516356       2MS-0124-71V R4            2     VT, MT, RT, UT ON 23086 AM1             23080A        98516356       2MS-0124-72V Ri            2     VT, MT, RT, UT ON 23086 AM1             23080B        98516357      2MS-0123-68V                2     VT, MT, RT, UT ON 23086 AM1             23080B        98516357       2MS-0123-70V               2     VT, MT, RT, UT ON 23086 AM1             23080B        98516357       2MS-0123-71 V              2     VT, MT, RT, UT ON 23086 AM1             23080B        98516357       2MS-01 23-73V              2     VT. MT. RT. UT ON 23086 AM2             23085A        98516899       2FDW-0226-100V             2     VT, MT, RT, UT ON 23086 AM2             23085A        98516899       2FDW-0226-1 01 V           2     VT, MT, RT, UT ON 23086 AM2             23085A        98516899       2FDW-0226-98V Ri            2    VT, MT, RT, UT ON 23086 AM2             23085A        98516899       2FDW-0226-99V               2    VT, MT, RT, UT ON 23086 AM2             23085B        98516911       2FDW-0253-108V RI           2    VT, MT, RT, UT ON 23086 AM2            23085B         98516911       2FDW-0253-109V Ri          2     VT, MT, RT, UT ON 23086 AM2             23085B        98516911       2FDW-0253-1 1OV             2    VT, MT, RT, UT ONl' 2308u AM2~e f^hI nrt~flP A ItAd 230850B        985i1iii 69-i i   j2FDW-0253-i 1  YI    1  i1i V R2     2     VT, MT, RT, UT ON 23086 AM3            23075A         98530942      2FDW-01 89-30V R3           2     VT, MT, RT, UT ON 23086 AM3            23075A         98530942       2FDW-0210-78V Cl           3     VT, MT 1 of 2

I STEAM GENERATOR PRESERVICE WELD EXAMINATION Modification Package No. Work Package No. Work Order No. Field Weld No. ISI Class Preservice NDE ON 23086 AM3 23075B 98530949 2FDW-0190-49V R2 2 VT, MT, RT, UT ON 23086 AM3 23075B 98530949 2FDW-01 90-50V 2 VT, MT, RT, UT ON 23086 AM4 23065A 98532391 2RC-0279-90V (CL 2A2) 1 VT, MT, RT, UT ON 23086 AM4 23065A 98532391 2RC-0279-91V (CL 2A1) 1 VT, MT, RT, UT ON 23086 AM4 23065B 98532393 2RC-0279-94V (CL 2B2) 1 VT, MT, RT, UT ON 23086 AM4 23065B 98532393 2RC-0279-95V (CL 2B1) 1 VT, MT, RT, UT ON 23086 AM4 23067A 98532391 2RC-0279-88V (HL ME) 1 VT, MT, RT, UT ON 23086 AM4 23067A 98532391 2RC-0279-89V R3a (HL PE) 1 VT, MT, RT, UT ON 23086 AM4 23067B 98532393 2RC-0279-92V (HL) 1 VT, MT, RT, UT ON 23086 AM4 23067B 98532393 2RC-0279-93VR2 (HL) 1 VT, MT, RT, UT ON 23086 AM5 23522A 98532818 2FDW-0280-172V 2 VT, RT ON 23086 AM5 23522A 98532818 2FDW-0281-176V 2 VT, RT ON 23086 AM5 23522A 98532818 2FDW-0282-1 76V 2 VT, RT ON 23086 AM5 23522A 98532818 2FDW-0282-183V 2 VT, RT ON 23086 AM5 23522B 98532820 2FDW-0285-149V 2 VT, RT

    %-II 23086v AM5l         2322          9532820      2FDW-0286-i 56V              2     Iv 1, R I ON 23086 AM5             23522B        98532820     2FDW-0287-1 63V              2      VT, RT ON 23086 AM5             23522B        98532820     2FDW-0287-1 70V              2      VT, RT 2 of 2

Date: 12/27/05 Sheet: 1 of 1 TO: ONS ISIM Plan Manager FROM: ONS QA Tech. Support RE: PRESERVICE EXAMINATIONS OF CLASS 1 & 2 WELDS As required by ASME Section Y'l 1998 Edition with 2000 addenda. Pre-service examinations were performed on ISI Class 1 & 2 welds made during the U2EOC21 outage timeframe. The following is a list of the welds that received pre-service examinations during this outage timeframe. WORK ORDER WELD NUMBER ISI CLASS INSPECTION TYPE NUMBER MT PT RT UT 98705438 2HP-0483 - 1, 2, 3, 2 X _________ ____ 4,5, 12, 13, & 14 _ _ _ _ _ _ _ _ 2HP-0484 - 1, 2, 3, of 8,9,10,11,12, & 2 X 17 2HP-0485 - 1,2, 3, 8,9,10,11,12, & 2 X 17 2HP-0486 - 1, 2, 3, X 4,5,12,13, & 14 2HP-0487 - 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 2 X 11,12,13,14,15, 16,17,18, & 19 2HP-0488 - 4, 5, 6, 7,8,9,10, 11,12, 2 x 13,14,15, 16,17, 19, &20 2LWD-0470 - 38, 39, 40, 41, 42, 4:3, 2 X 44, 45, & 46 _ 98745816 2HP-0497 - 55 & 56 2 X 98732127 2HP-0495 - 27 1 X _ _ _2HP-0496 - 37 1 X I. -4. _ _I _- _ _4 Prepared B_ 4_- __;

6.0 Pressure Testing This is a two-part summary showing a compilation of Class 1 and Class 2 pressure tests conducted from refueling outage EOC-20 through refueling outage EOC-21 for Oconee Unit 2. The first part of this summary, titled "Third Period/Third Interval Summary," is a completion status for the third period of the third 10-year interval. The second part, titled "First Period/ Fourth Interval Summary," is a completion status for the first period of the fourth 10-year interval. Third Period/ Third Interval Summary Table 6-1 shows the number of the Class 1 pressure tests conducted to fulfill the requirements of the third inspection period of the third 10-year interval. There was no through-wall leakage observed during the pressure test. Table 6-1 Outage Specific Summatny Examination Total Examinations Category Test Requirement Credited Since Refueling Outage 20 B-P System Hydrostatic Test (IWB-5222) 2 Table 6-2 shows a completion status of pressure tests conducted during the third period of the third ten-year interval. Table 6-2 Period Specific Summary Total Total (%/o) Examination Test Requirement Examinations Examinations Examinations Category Required For Credited For Complete For _ This Period This Period This Period B-E System Hydrostatic Test 1 1 100% (IWB-5222) B-P System Leakage Test 1 1 100% (IWB-5221) B-P System Hydrostatic Test 7 71 100% (IWB-5222) C-H System 13 13 100% Inservice/Functional Test (IWC-5221) C-H System Hydrostatic Test 43 43 100% (IWC-5222) 1 Two of the seven Category B-P hydrostatic tests required for the third period of the third 10-year interval are included in this summary report. The other five were reported previously in the EOC20 summary report. Reference Problem Investigation Process (PIP) serial number 0-03-02056. Refueling Outage Report EOC21 Page 1 of 6 Oconee Unit 2 Revision 0 Section 6 January 10, 2006

The Class 1 (Category B-P) hydrostatic test is required once during each 10-year interval. Table 6-3 shows the completion data of the Class 1 (Category B-IP) hydrostatic tests conducted during refueling cycle EOC21. These tests were for the isolated area between two closed valves and were not part of the Class 1 Leakage Test boundary that is required each refueling outage. Therefore, one test was not conducted to satisfy two different interval requirements. Table 6-3 Detailed Class 1 Listing EOC21 Zone Completion Number Boundary Dwg _ Status EOC21 VT-2 Examination Date OZ2H-1 V O-ISIH-1 OOA-2.2 Complete - 11/23/05 OZ2H-1W O-ISIH-102A-2.1 I Complete 1 11/23/05 FirstPeriod/FourthInterval Summary m This portion of the summary report is a pressure test completion status for the first period of the fourth ten-year interval. Table 6-4 shows the number of pressure tests completed from refueling outage EOC-20 through refueling outage EOC-21. There was no through-wall leakage observed during these pressure tests. Table 6-4 Outaae Specific Summary Examination Total Examinations Category Test Requirement Credited For This Outage B-P System Leakage Test (IWB-5220) 1 C-H System Leakage Test (IWC-5220) Table 6-5 shows a completion status of pressure tests conducted during 1the first period of the fourth ten-year interval Table 6-5 Period Specific Summary Total Total (%) Examination Test Requirement Examinations Examinations Examinations Category Required For Credited For Complete For This Period This Period This Period B-P System Leakage Test 2 1 50% (IWB-5220) C-H System Leakage Test 52 42 80.77% (IWC-5220) Refueling Outage Report EOC21 Page 2 of 6 Oconee Unit 2 Revision 0 Section 6 Januaiy 10, 2006

The Class 1 (Category B-P) leakage test is required each refueling outage.. Table 6-6 shows the completion data of the Class 1 (Category B-P) leakage test conducted during refueling cycle EOC21. Table 6-6 Detailed Class 1 Listing EOC21 Zone Completion EOC21 VT-2 Code Case(s) Number Boundary Dwg Status Examination Date Used OZ2L-1A O-ISIL4-100A-2.1 Complete 11/23/2005 None O-ISIL4-100A-2.2 Complete 11/23/2005 None O-ISIL4-100A-2.3 Complete 11/23/2005 None O-ISIL4-101 A-2.1 Complete 11/23/2005 None O-ISIL4-101A-2.4 Complete 11/23/2005 None O-ISIL4-102A-2.1 Complete 11/23/2005 None O-ISIL4-102A-2.3 Complete 11/23/2005 None O-ISIL4-11OA-2.1 Complete 11/23/2005 None O-ISIL4-11OA-2.4 Complete 11/23/2005 None OZ2L-1AA O-ISIL4-101A-2.4 Complete 11/23/2005 None OZ2L-1V O-ISIL4-100A-2.2 Complete 11/23/2005 None OZ2L-1Z O-ISIL4-101A-2.4 Complete 11/23/2005 None OZ2L-16 O-ISIL4-101A-2.4 Complete 11/23/2005 None The Class 2 (Category C-H) leakage tests are required each period. Table 6-7 shows the completion data of the Class 2 (Category C-H) leakage tests required for the 1s, Period. Table 6-7 Detailed Class 2 List g ___ VT-2 Code Zone Examination Case(s) Number Boundary Dwg Completion Status Date Used 1 IZ2L-10 O-ISIL4-101A-2.3 Completed in EOC21 11/14/05 None 2 IZ2L-11 O-ISIL4-101A-2.3 Completed in EOC21 11/14/05 None 3 IZ2L-12 O-ISIL4-101A-2.3 Not Yet Tested O-ISIL4-101A-2.4 Not Yet Tested 4 IZ2L-13 O-ISIL4-101A-2.3 Completed in EOC21 07/25/05 None 5 IZ2L-14A O-ISIL4-101A-2.3 Completed in EOC21 11/11/05 None 6 IZ2L-14B O-ISIL4-101A-2.3 Compileted in EOC21 11/11/05 None 7 IZ2L-20 O-ISIL4-101A-2.3 Compileted in EOC21 07/27/05 None Refueling Outage Report EOC21 Page 3 of 6 Oconee Unit 2 Revision 0 Section 6 Januaiy 10, 2006

VT-2 Code Zone Examination Case(s) Number Boundary Dwg Completion Status Date Used 8 IZ2L-22 O-ISIL4-101 A-2.3 Not Yet Tested O-ISIL4-102A-2.1 Not Yet Tested O-ISIL4-102A-2.2 Not Yet Tested O-ISIL4-104A-1.2 Not Yet Tested 9 IZ2L-24 O-ISIL4-102A-2.1 Completed in EOC21 08/23/05 None O-ISIL4-103A-2.1 Completed in EOC21 08/23/05 None 10 IZ2L-25 O-ISIL4-102A-2.1 Completed in EOC21 08/25/05 None O-ISIL4-103A-2.1 Completed in EOC21 08/25/05 None 11 IZ2L-27A O-ISIL4-102A-2.1 Not Yet Tested O-ISIL4-102A-2.2 Not Yet Tested 12 IZ2L-27B O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None 13 IZ2L-4 O-ISIL4-101A-2.1 Completed in EOC21 07/25/05 None 14 IZ2L-41 O-ISIL4-109A-1.1 Not Yet Tested 15 IZ2L-48 O-ISIL4-122A-2.1 Completed in EOC21 06/27/05 None O-ISIL4-122A-2.2 Completed in EOC21 06/27/05 None O-ISIL4-122A-2.3 Completed in EOC21 06/27/05 None O-ISIL4-122B-2.1 Completed in EOC21 06/27/05 None _ O-ISIL4-122A-2.4 Completed in EOC21 06/27/05 None 16 IZ2L-5 O-ISIL4-101 A-2.1 Not Yet Tested O-ISIL4-101A-2.3 Not Yet Tested 17 IZ2L-60 O-ISIL4-124B-2.2 Completed in EOC21 09/06/05 None O-ISIL4-124B-2.4 Completed in EOC21 09/06/05 None 18 OZ2L-14B O-ISIL4-101A-2.4 Completed in EOC21 11/11/05 None 19 OZ2L-15 O-ISIL4-101A-2.4 Completed in EOC21 11/23/05 None 20 OZ2L-16 O-ISIL4-101A-2.4 Completed in EOC21 11/22/05 None 21 OZ2L-17 O-ISIL4-101A-2.2 Completed in EOC21 11/21/05 None 22 OZ2L-17B O-ISIL4-101A-2.2 Completed in EOC21 11/11/05 None 23 OZ2L-18 O-ISIL4-101A-2.2 Completed in EOC21 11/19/05 None Refueling Outage Report EOC21 Page 4 of 6 Oconee Unit 2 Revision 0 Section 6 January 10, 2006

VT-2 Code Zone Examination Case(s) Number Boundary Dwg Completion Status Date Used 24 OZ2L-19A O-ISIL4-104A-1.1 Completed in EOC21 11/14/05 None O-ISIL4-101A-2.5 Completed in EOC21 11/14/05 None 25 OZ2L-19B O-ISIL4-101A-2.5 Completed in EOC21 11/15/05 None 26 OZ2L-1A O-ISIL4-101A-2.1 Completed in EOC21 11/23/05 None O-ISIL4-101A-2.1 Completed in EOC21 11/23/05 None O-ISIL4-101A-2.5 Completed in EOC21 11/23/05 None 27 OZ2L-2 O-ISIL4-101A-2.1 Completed in EOC21 11/23/05 None O-ISIL4-101A-2.4 Completed in EOC21 11/23/05 None O-ISIL4-101A-2.5 Completed in EOC21 11/23/05 None 28 OZ2L-21 O-ISIL4-102A-2.1 Completed in EOC21 11/19/05 None O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None O-ISIL4-104A-1.2 Completed in EOC21 11/19/05 None 29 OZ2L-23 O-ISIL4-101A-2.2 Completed in EOC21 11/19/05 None O-ISIL4-102A-2.1 Completed in EOC21 11/19/05 None O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None 30 OZ2L-26 O-ISIL4-102A-2.2 Partial 11/19/05 None 31 OZ2L-28 O-ISIL4-1 02A-2.2 Partial 11/19/05 None 32 OZ2L-29 O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None 33 OZ2L-29A O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None _ O-ISIL4-102A-2.3 Completed in EOC21 11/19/05 None 34 OZ2L-3 O-ISIL4-101A-2.1 Completed in EOC21 11/20/05 None 35 OZ2L-30 O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None 36 OZ2L-30A O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None O-ISIL4-102A-2.3 Completed in EOC21 11/19/05 None 37 OZ2L-31 A O-ISIL4-102A-2.3 Completed in EOC21 10/22/05 None 38 OZ2L-31B O-ISIL4-102A-2.3 Completed in EOC21 10/22/05 None 39 OZ2L-31 C O-ISIL4-102A-2.3 Completed in EOC21 10/22/05 None 40 OZ2L-39 O-ISIL4-104A-1.1 Not Yet Tested 41 OZ2L-42A O-ISIL4-110A-2.1 Completed in EOC21 11/23/05 None Refueling Outage Report EOC21 Page 5 of 6 Oconee Unit 2 Revision 0 Section 6 January 10, 2006

VT-2 Code Zone Examination Case(s) Number Boundary Dwg Completion Status Date Used 42 OZ2L-42B O-ISIL4-11OA-2.1 Completed in EOC21 11/23/05 None 43 OZ2L-44 O-ISIL4-11OA-2.1 Not Yet Tested O-ISIL4-121 B-2.3 Not Yet Tested O-ISIL4-121 B-2.5 Partial 11/19/05 None O-ISIL4-121 D-1.2 Not Yet Tested O-ISIL4-121 D-2.1 Partial 11/19/05 None O-ISIL4-122A-2.1 Not Yet Tested _ 44 OZ2L-6 O-ISIL4-101A-2.1 Completed in EOC21 11/19/05 None O-ISIL4-101A-2.2 Completed in EOC21 11/19/05 None O-ISIL4-109A-1.1 Completed in EOC21 11/19/05 None 45 OZ2L-64 O-ISIL4-124B-2.2 Completed in EOC21 11/23/05 None 46 OZ2L-65 O-ISIL4-124B-2.4 Not Yet Tested 47 OZ2L-7 O-ISIL4-101A-2.2 Completed in EOC21 11/11/05 None O-ISIL4-101A-2.3 Completed in EOC21 11/11/05 None 48 OZ2L-7B O-ISIL4-101A-2.3 Completed in EOC21 11/11/05 None O-ISIL4-102A-2.1 Completed in EOC21 11/11/05 None O-ISIL4-102A-2.2 Completed in EOC21 11/11/05 None 49 OZ2L-89 O-ISIL4-116C-2.1 Completed in EOC21 11/04/05 None 50 OZ2L-9 O-ISIL4-101A-2.3 Completed in EOC21 11/19/05 None O-ISIL4-102A-2.1 Completed in EOC21 11/19/05 None O-ISIL4-102A-2.2 Completed in EOC21 11/19/05 None 51 OZ2L-90 O-ISIL4-116C-2.1 Completed in EOC21 11/04/05 None 52 OZ2L-91 O-ISIL4-116C-2.1 Completed in EOC21 11/04/05 None Section 6 Prepared By: Date: J Section 6 Reviewed By: Date: U , /0 6 Refueling Outage Report EOC21 Page 6 of 6 Oconee Unit 2 Revision 0 Section 6 Janualy 10, 2006}}

ML060580472

Text

Subject:

Description:

Description:

Navigation menu

Search