ML033350340
| ML033350340 | |
| Person / Time | |
|---|---|
| Site: | Davis Besse  |
| Issue date: | 11/30/2003 |
| From: | Hour K, Hyres J BWXT |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| 1140-025-02-24 31-5029337-02 | |
| Download: ML033350340 (11) | |
Text
BWXT SERVICES, INC.
1140-025-02-24 61 OP Figure 3.3.1: Initial cavity sample section locations (cuts #1, #2, and #3).
CZ
BWXT SERVICES, INC.
1140-025-02-24 62 BWTSRIEIC 10050-46 Cut #4 location Cut #5 location Figure 3.3.2: Photographs showing locations of cut #4 (top) and cut #5 (bottom).
Piece A2 contained the exposed cladding.
BWXT SERVICES, INC.
1140-025-02-24 63 BWTSRIEI.
10050-46 Figure 3.4.1: PT results for cut #3. A small weld void was present near the root of the nozzle #11 J-groove weld. Normal photo is on the left, black light photo on right. There was no evidence of cladding disbond noted on any of the cut faces examined. -1X C-23
BWXT SERVICES, INC.
1140-025-02-24 64 BWXTSERICE, IC.
14002502-4 6
Figure 3.4.2: Circumferential indications on RCS side of cladding from -0O to 45°.
No indications were present in the upward-deflected region of the cladding.
C2*
BWXT SERVICES, INC.
1140-025-02-24 65 BWXT
- SERVICES, INC.
1140-025-02-24 65 Figure 3.4.3: PT results for nozzle #3 J-groove weld bore and cladding underside.
The J-groove weld contained an axial indication near 100 on the bore ID and circumferential indications on the RCS side from -200 to -450.
BWXT SERVICES, INC.
1140-025-02-24 66 BWXT SERVICES, INC.
1140-025-02-24 66 Figure 3.4.4: PT results for upper surface of exposed J-groove weld. The axial crack is visible near 100 (rough weld texture produced high PT background).
c2Ca
BWXT SERVICES, INC.
1140-025-02-24 67 BWXT SERVICES, INC.
1140-025-02-24 67 Figure 3.5.1: Photographs showing exposed cladding surface. The gray mask in the lower photograph was used to calculate the exposed cladding surface area.
BWXT SERVICES, INC.
1140-025-02-24 68 BWXT SERVICES, INC.
1140-025-02-24 68 Figure 3.5.2: Photographs showing clad thickness setup (top) and coordinate system (bottom).
BWXT SERVICES, INC.
1140-025-02-24 69 41 i
.~~~~~~~~~~~'.
n 3~~~~~~~~2" 40 5 20
\\40.200.27
. 32S2 0267 402s 40264 4025I
+0256
+022
+0.259 0242 40225
+0278
+0.267
+0253
+02n +02
[ i]
+0.253
+0243
+0.29 0236 1 inch
(
+0.252
+0.27
+D258
+C Cry
+o-51 I+3
+O et 4
0.314" (max) l z-\\
2/oN4nn4 40236 0.259 0242 40239 J26 j 20 l0.202" (rnin) l
/
02.0 239 02 0233 4 02S5 40247 4C23S
'0238 22 0.239 40.246 4
0.2 031< 4 0.2t 4
0.233 40234
< 40239 4 ° -3M 4no0259
+0245 Figure 3.5.3: Cladding thickness measurements.
BWXT SERVICES, INC.
1140-025-02-24 70 BWXT SERVCES, INC 1140-02-02-24 7
Clad Thickness 4.2 1 0.3 0.29 0.28 0.217 0.26 0.25 0 24 0.23 0.22 0.21 0.2 2
-2
-j x
Figure 3.5.4: Colorized representation of clad thickness measurements.
C29 I
BWXT SERVICES, INC.
1140-025-02-24 71 BWXT
- SERVICES, INC.
1140-025-02-24 71~~~~~
Clad Profile - Top Surface 4.2 1 0.09 Ii w
0.06 0.03 0.0
-0.03
-0.06
-009
_2-012 Figure 3.5.5: Colorized representation of exposed cladding profile. Red area denotes area of maximum deflection.