ML032680869

End-of-Cycle 20 Refueling Outage, Inservice Inspection Report, Third Ten-Year Inspection Interval

ML032680869
Person / Time
Site:	Oconee
Issue date:	09/11/2003
From:	Rosalyn Jones Duke Power Co
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML032680869 (277)

Text

Duke R. A. JONES MPowere Vice President A Duke Energy Company Duke Power 29672 / Oconee Nuclear Site 7800 Rochester Highway Seneca, SC 29672 864 885 3158 864 885 3564 fax September 11, 2003 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555

Subject:

Duke Energy Company Oconee Nuclear Station, Unit 3 Docket No. 50-287 Unit 3 EOC 20 Refueling Outage Inservice Inspection Report Third Ten-Year Inservice Inspection Interval Please find attached a copy of the Inservice Inspection Report for Oconee Unit 3 End of Cycle 20 Refueling Outage. This report is submitted pursuant to Section XI of the ASME Boiler and Pressure Vessel Code, 1989 Edition, with no addenda, Article IWA 6230.

If there are any questions you may contact R. P. Todd at (864) 885-3418.

Very u yours, R./ {o s, Si Vice-President Oconee Nuclear Station Attachment AD47 www. duke-energy. corn

U. S. Nuclear Regulatory Commission September 11, 2003 Page 2 xc wo/attachment: Mr. Luis A. Reyes Administrator, Region II U.S. Nuclear Regulatory Commission 61 Forsyth Street, S. W., Suite 23T85 Atlanta, GA 30303 Leonard N Olshan, Projects Manager Office of Nuclear Reactor Regulation U. S. Nuclear Regulatory Commission Washington, D. C. 20555 M. C. Shannon Senior NRC Resident Inspector Oconee Nuclear Station

I0 : 1NSE:RVICE I

-INSPECTION REPORT DUKE-POW-ER COMPANY OCONEE NUCLEAR STATION UNIT 3 TWENTIETH REFUELING OUTAGE i

'A Duke Energ-y Comp'any

Owner's Report For INSERVICE INSPECTIONS OCONEE UNIT 3 2003 REFUELING OUTAGE EOC20 (OUTAGE 6)

Plant Location: 7800 Rochester Highway, Seneca, South Carolina 29672 NRC Docket No. 50-287 Commercial Service Date: December 16, 1974 Document Completion Date 'T?7°'3 Owner. Duke Energy Corporation 526 South Church St.

Charlotte, N. C. 28201-1006 Revision 0 0

Prepared By. (WMVU11C0 V Date __ _ 3_

-0 Reviewed By: W-4 U .nA AAV ( 04, Date J4Z-3Z Approved By. I<, 4/t A-1 a )t I% ) Date

FORM NIS-1 OWNER'S DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules

1. Owner. Duke Energv Corporation. 526 S. Church St.. Charlotte. NC 28201-1006 (Name and Address of Owner)

2. Plant: Oconee Nuclear Station. 7800 Rochester Highway. Seneca. SC 29672 (Name and Address of Plant)

3. Plant Unit: 3 4. Owner Certificate of Authorization (if required) NIA

5. Commercial Service Date: December 16. 1974 6. National Board Number for Unit N/A

7. Components Inspected:

Component or Manufacturer Manufacturer State or National Appurtenance Installer Installer Serial Province No. Board No.

No.

See Section 1.1 in the Attached Report Note: Supplemental sheets in form of lists, sketches, or drawings may be used provided (1) size is 81/2 in. xI 1 in., (2) information in items 1 through 6 on this data report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Total number of pages contained in this report 213

I FORM NIS-1 (Back)

8. Examination Dates December 14, 2001 to June 17,2003

9. Inspection Period Identification: Third Period

10. Inspection Interval Identification: Third Interval

11. Applicable Edition of Section XI 1989 Addenda None

12. Date/Revision of Inspection Plan: November 20, 2001/ Revision 6

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Sections 2.0. 3.0 and 6.0

14. Abstract of Results of Examination and Tests. See Sections 4.0 and 6.0

15. Abstract of Corrective Measures. See Subsection 4.3 We certify that a) the statements made in this report are correct b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No. (if applicable) NA Expiration Date NA Date < A / Signed Duke Energy Corp. By i4AA ,X,

,,, ;j .

I / Owner Ai fF3W10CrK CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of AICe 7W OLd&AA0? employed by *The HSBI&I Co. of Connecticut have inspected the components described in this Owner's Report during the period

_____________to "-/7 -o3 , and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in the Owner's Report in accordance with the Inspection Plan and as required by the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, test, and corrective measures described in this Owner's Report.

Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection Commissions Afe/'Vs,? 1,o

- -- m-spectoes signature National Board, State, Province, and Endorsements Date f5 -f23

• The Hartford Steam Boiler Inspection & Insurance Company of Connecticut.

200 Ashford Center North Suite 300 Atlanta, GA. 303384860 (800) 417-3721 www.hsbc.com

DISTRIBUTION LIST

1. Duke Energy Corporation Inservice Inspection Plan Management

2. Welding and Inspection Services (ISI Coordinator)

3. NRC Document Control Desk

4. Hartford Steam Boiler Inspection and Insurance Company of Connecticut (AIA) c/o ANII at Oconee

5. Nuclear GO Regulatory & Industrial Affairs cdo Laura Burba

TABLE OF CONTENTS Section Title Revision

1. General Information 0

2. Third Ten Year Inspection Status 0

3. Final Inservice Inspection Plan 0

4. Results of Inspections Performed 0

5. Owners Report for Repair/Replacement Activities 0

6. Pressure Testing 0

1.0 General Information This report describes the Inservice Inspection of Duke Energy Corporation's Oconee Nuclear Station. Unit 3, during Outage 6/EOC 20. This is the first outage in the third inspection period of the Third Ten-Year Interval. ASME Section Xl, 1989 Edition with no Addenda, was the governing Code for selection and performing of the ISI examinations.

Included in this report are the inspection status for each examination category, the final inservice inspection plan, the inspection results for each item examined, and corrective actions taken when reportable conditions were found. In addition, there is an Owners Report for Repair/Replacement Section included for completed NIS-2 documentation of repairs and replacements.

1.1 Identification Numbers Manufacturer Item Manufacturer or Installer State or National or Installer Serial No. Province No. Board No.

Reactor Vessel Babcock & Wilcox 620-0009-51-52 N/A N-125 Steam Generator A Babcock & Wilcox 620-0009-55-1 N/A N-127 Steam Generator B Babcock & Wilcox 620-0009-55 N/A N-128 Pressurizer Babcock & Wilcox 620-0009-59 N/A N-126 Main Steam Duke Power NA NA NA System Auxiliary Steam Duke Power NA NA NA System Feedwater System Duke Power NA NA NA Emergency Duke Power NA NA NA Feedwater System Steam Generator Duke Power NA NA NA Flush System Condensate Duke Power NA NA NA System Vents and Exhaust Duke Power NA NA NA System EOC 20 Refueling Outage Report Page 1 of 4 Oconee Unit 3 Revision 0 Section 1 August 18, 2003

Manufacturer Item Manufacturer or Installer State or National or Installer Serial No. Province No. Board No.

Condenser Duke Power NA NA NA Circulating Water High Pressure Duke Power NA NA NA Service Water System Low Pressure Duke Power NA NA NA Service Water System Reactor Coolant Duke Power NA NA NA System High Pressure Duke Power NA NA NA Injection System Low Pressure Duke Power NA NA NA Injection System Reactor Building Duke Power NA NA NA Spray System Component Duke Power NA NA NA Cooling System Spent Fuel Cooling Duke Power NA NA NA System ..

Vents - Reactor Duke Power NA NA NA Building Components Drains - Reactor Duke Power NA NA NA Building Components EOC 20 Refueling Outage Report Page 2 of 4 Oconee Unit 3 Revision 0 Section 1 August 18, 2003

1.2 Personnel. Eauinment and Material Certifcations All personnel who performed or evaluated the results of inservice inspections during the time frame bracketed by the examination dates shown on the NIS-1 Form were certified in accordance with the requirements of 1989 Edition of ASME Section Xl with no addenda Including Appendix VIl for ultrasonic inspections. In addition, ultrasonic examiners were qualified in accordance with ASME Section Xl, Appendix VIII, and 1995 Edition with the 1996 Addenda through the Performance Demonstration Initiative (PDI) for similar metal piping welds and reactor vessel shell welds.

The appropriate certification records for each inspector, calibration records for inspection equipment, and records of materials used (i.e., NDE consumables) are on file at Oconee Nuclear Station or copies can be obtained by contacting the Duke Energy's Corporate Office in Charlotte, North Carolina.

The copies of the certification records for Washington Group inspectors can be obtained by contacting the Duke Energy's Corporate Office in Charlotte, North Carolina.

The certification records for Framatome ANP inspectors and calibration records of Framatome inspection equipment are on file at the Framatome ANP Office 155 Mill Ridge Road, Lynchburg, Va.

1.3 Reference Documents The following reference documents apply to the inservice inspections performed during this report period. A copy may be obtained by contacting the ISI Plan Manager at Duke Energy's Corporate Office in Charlotte, North Carolina.

Duke Power Company Problem Investigation Process Report # 0-03-03262 Duke Power Company Problem Investigation Process Report # 0-03-01519 Duke Power Company Problem Investigation Process Report # 0-03-04958 Duke Power Company Problem Investigation Process Report # 0-03-05164 Duke Energy Request for Relief 97-01 (Limited welds found during EOC 20)

Duke Energy Request for Relief 03-005 (Limited welds found during EOC 20)

EOC 20 Refueling Outage Report Page 3 of 4 Oconee Unit 3 Revision 0 Section 1 August 18, 2003

1.4 Augmented and Elective Examinations Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section Xi Code; therefore. It is exempt from ANII review, verification, and/or record certification.

1.5 Responsible Inspection Agency The Hartford Steam Boiler Inspection and Insurance Company of Connecticut is responsible for the third party inspections required by ASME Section Xl.

Authorized Nuclear Inservice Insnector(s)

Name: Clayton T. Smith, Gary Brouette, Nancy Slaughter, Mark Grace, Jim Longenberger and William Huber.

Employer: The Hartford Steam Boiler Inspection & Insurance Company of Connecticut.

Business Address: 200 Ashford Center North Suite 300 Atlanta, GA 30338-4860 (800) 417-3721 www.hsbct.com EOC 20 Refueling Outage Report Page 4 of 4 Oconee Unit 3 Revision 0 Section 1 August 18, 2003

2.0 Third Ten Year Interval Inspection Status The completion status of inspections required by the 1989 ASME Code Section Xi, no Addenda, is summarized in this section. The requirements are listed by the ASME Section XI Examination Category as defined In Table IWB-2500-1 for Class 1 Inspections, and in Table IWC-2500-1 for Class 2 Inspections, and IWF-2500-1 (Code Case N-491 applies) for Class 1 and 2 Component Supports.

Augmented inspections are also included.

Class I Inspections Examination Inspections Inspections Percentage 1Deferral Category Description Required Completed Completed Allowed B-A Pressure Retaining Welds 8 Welds 2.5 Welds 31% Yes in Reactor Vessel B-B Pressure Retaining Welds 11 Welds 10 Welds 91% No In Vessels Other than Reactor Vessel B-D Full Penetration Welds of 30 16 53% Partial Nozzles In Vessels Inspections Inspections Inspection Program B B-E Pressure Retaining Partial Penetration Welds in REFERENCE SECTION 6.0 OF THIS REPORT Vessels B-F Pressure Retaining 28 Welds 20 Welds 71% No Dissimilar Metal Welds B-G-1 Pressure Retaining Bolting 130 Items 127 Items 98% Yes Greater than 2 Inches in Diameter B-G-2 Pressure Retaining Bolting 22 Items 21 Items 95%. No 2 Inches and Less in Diameter B-H Integral Attachments for N/A N/A N/A N/A Vessels B-J Pressure Retaining Welds 141 Welds 112 Welds 79% No in Piping I I _ _

'Deferral of inspection to the end of the interval as allowed by ASME Section Xl Tables IWB and IWC 2500-1.

EOC 20 Refueling Outage Report Page 1 of 4 Oconee Unit 3 Revision 0 Section 2 August 18, 2003

Class 1 Inspections (Continued)

Examination Inspections Inspections Percentage s DeIenral Category Description Required Completed Completed Allowed B-K-1 Integral Attachments for N/A N/A N/A N/A Piping, Pumps and Valves B-L-1 Pressure Retaining Welds 1 Weld 1 Weld 100% Yes in Pump Casings B-L-2 Pump Casings 1 Casing 1 Casing 100% Yes B-M-1 Pressure Retaining .N/A N/A N/A N/A Welds in Valve Bodies B-M-2 Valve Body 3 Valves 3 Valves 100% Yes B-N-1 Interior of Reactor Vessel 3 Inspections 2 Inspections 67% No B-N-2 Integrally Welded Core 1 Inspection 0 Inspections 0% Yes Support Structures and Interior Attachments to Reactor Vessels B-N-3 Removable Core Support 1 Inspection 0 Inspections 0% Yes Structures B-0 Pressure Retaining Welds 3 Housings 2 Housings 67% Yes in Control Rod Housings B-P All Pressure Retaining Components REFERENCE SECTION 6.0 OF THIS REPORT B-Q Steam Generator Tubing N/A N/A N/A N/A F-A Class 1 Component 31 Supports 27 Supports 87% No F1.10 & F1.040 Supports (Except Items. Snubbers)

F-A Class 1 Component 25 Snubbers 25 Snubbers 100% No F1.050 Items Supports, Snubbers 5 Deferral of inspection to the end of the interval as allowed by ASME Section XI Tables IWB and IWC 2500-1.

EOC 20 Refueling Outage Report Page 2 of 4 Oconee Unit 3 Revision 0 Section 2 August 18, 2003

Class 2 Inspections Examination Inspections Inspections Percentage 5 Deferral Category Description Requird- COMPleted Completed Allowed C-A Pressure Retaining Welds 8 Welds 7 Welds 88% No In Pressure Vessels C-B Pressure Retaining Nozzle 4 Welds 4 Welds 100% No Welds In Vessels C-C Integral Attachments for 61 55 90% No Vessels, Piping, Pumps Attachments Attachments and Valves C-D Pressure Retaining Bolting 2 Items 2 Items 100% No Greater Than 2 Inches In Diameter C-F-1 Pressure Retaining Welds 136 Welds 115 Welds 85% No in Austenitic Stainless Steel or High Alloy Piping C-F-2 Pressure Retaining Welds 59 Welds 46 Welds 78% No in Carbon or Low Alloy Steel Piping C-G Pressure Retaining Welds 1 1 100% No in Pumps and Valves C-H All Pressure Retaining Components REFERENCE SECTION 6.0 OF THIS REPORT F-A Class 2 Component 120 Supports 105 Supports 88% No F1.020 & F1.040 Supports (Except Items. Snubbers)

F-A Class 2 Component 35 Snubbers 35 Snubbers 100I/ No F .050 Items Supports, Snubbers 6 Deferral of inspection to the end of the interval as allowed byASME Section Xl Tables IWB and IWC 2500-1.

EOC 20 Refueling Outage Report Page 3 of 4 Oconee Unit 3 Revision 0 Section 2 August 18, 2003

AugmentedfElective Inspections Augmented and elective examination information found within this Inservice Inspection Report is not required by the ASME Section XI Code; therefore, it is exempt from ANII review, verification, and/or record certification.

Number PercentageComplete GO1.001 Reactor Coolant Pump Flywheel Not Scheduled G02.001 HPI Nozzle Safe End Examinations Not Scheduled G03.001 Pressurizer Surge Une Examinations Not Scheduled G04.001 Thermal Stress Piping (NRC Bulletin Not Scheduled 88-08)

G06.001 Auxiliary Feedwater Header Water Not Scheduled Hammer Examinations (PSC21-82)

G07.001 Augmented Examination of Longitudinal No longer applicable. Code Case N-524 Is being Piping Welds With A Nominal Wall used for the examination of all longitudinal piping Thickness < 3/8" and > Nominal Pipe welds.

Size 4" G08.001 Pressurizer Sensing/ Sampling Nozzle 100% of EOC 20 Requirements Safe Ends G09.001 Class 2 Piping Welds Nominal Pipe Size 100% of EOC 20 Requirements

> 4" With Nominal Wall Thickness< 3/8" G10.001 Class 1RTE Mounting Bosses 100% of EOC 20 Requirements G1i1.001 Reactor Coolant Pump 3A2 and 3B1 100% of EOC 20 Requirements Flange Joint, Studs, and Adjacent Areas G12.001 HPI System Upgrade Piping Welds With 100% of EOC 20 Requirements A Nominal Wall Thickness < 1/5" on Piping with a Nominal Pipe Size > 2" and Nominal Pipe Size < 4".

EOC 20 Refueling Outage Report Page 4 of 4 Oconee Unit 3 Revision 0 Section 2 August 18, 2003

3.0 Final Inservice Inspection Plan The final Inservice Inspection Plan shown in this section lists all ASME Section Xi Class 1, Class 2, Class 3, and Augmented examinations credited for this report period.

The information shown below is a field description for the reporting format included in this section of the report:

Item Number = ASME Section Xl Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2 ), Augmented Requirements ID Number = Unique Identification Number Sys = Component System Identification iso / Dwg. Numbers = Location and/or Detail Drawings Proc - Examination Procedures Insp Req. = Examination Technique - Magnetic Particle, Dye Penetrant, etc.

Mat/Sch. - General Description of Material Diam. / Thick - Diameter/Thickness Cal Blocks - Calibration Block Number Comments = General and/or Detail Description EOC 20 Refueling Outage Report Page 1 of 1 Oconee Unit 3 Revision 0 Section 3 August 18, 2003

( (f EOC 20 DUKE ENERGY CORPORATION CATEGORY B-B. Pressure Retainina Welds INSERVICE INSPECTION PLAN MANAGEMENT In Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report ITressurNzeU Oconee 3 Page 1 Inservice Inspection Plan for Interval 3 Outage 6 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS I PROC INSP REQ MAT/SCH DIArrHK CAL BLOCKS COMMENTS Shell-to-Head Welds; Circumferential 't B02.011.002 3-PZR-WP28 ISI-C)CN3-002 NDE-620 UT CS 84.000 40394 Pressurizer Lower Head Pc.6 to Heater Belt Shell Circumferential 50 OM- 2201-229 See Corn 4.750 50235 Pc. 4 and Lower Heater Belt Foring Pc. 40, Class A Head to Calibration block 502M Is being added as a result of Heater Belt Shell revisIon 8 to examination procedure NDE-820.

Procedure PDI-UT-6 may be used.

Total B02.011 Items: I

• ' Shell-to-Head Welds; Longitudinal

• B02.012.002 3-PZR-WP7-1 11SI-OCN3-002 NDE-620 UT CS 0.000 40338 Pressurizer Heater Belt Shell Pc.4 to Lower Heater Longitudinal 50 C)M-2201-229 See Corn 6.188 50236 Belt Forging Pc.40 and Upper Heater Belt Forging Class A Shell to Pc.41 (Y-AxIs).

Heater Belt Forging Calibration block 50236 Is being added as a result of revision 8 to examination procedure NDE-620.

Procedure PDI-UT-6 may be used.

Total B02.012 Items: 1

( (

EOC 20 DUKE ENERGY CORPORATION CATEGORY B-B, Pressure Retalning Welds INSERVICE INSPECTION PLAN MANAGEMENT In Vessels Other Than Reactor Vessels Inservice Inspection Database Management System Plan Report Nstea~rnGnrtors (Primar Side) Oconee 3 Page 2 Inservice Inspection Plan for Interval 3 Outage 6 0811812003 ITEM NUMBER ID NUMBER SYS ISO/DWG INIUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS A* Tubesheet-to-Head Weld **'

B02.040.001 3-SGA-WG58-1 ISI-OCN3-003 NDE-970 UT CS 119.000 40393 Steam Generator 3A Upper Head Pc.8 to Tubesheet Circumferential 50 OM-2201-222 NDE-640 8.000 Pc. 51.

Class A Head to Tubesheet Total B02.040 Items: 3 Total B02 Items: 3

EOC 20

( C (

DUKE ENERGY CORPORATION CATEGORY B-F. Pressure Retainina INSERVICE INSPECTION PLAN MANAGEMENT Dissimilar Metal Welds Inservice Inspection Database Management System Plan Report Oconee 3 Page 3 Inservice Inspection Plan tor Interval 3 Outage 6 0811812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • Less Than NPS 4; Dissimilar Metal Butt Welds

• B05.140.002 3-50-21-1 3-50-21 NDE-35 PT SS-Inconel 1.500 Circumferential 50 OFD-100A-3.1 0.281 Class A Elbow to Dissimilar NOZZle B05.140.003 3-50-21-23 3-50-21 NDE-35 PT SS-Incore 1.500 Circumferential 50 OFD-100A-3.1 0.281 Class A Elbow to Dissimilar Nozzle Total 805.140 Items: 2 Total 805 Items: 2

( (

EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater than 2" In DlIameter Inservlce Inspection Database Management System Plan Report IMNMrBVesse Oconee 3 Page 4 Inservice Inspection Plan for Interval 3 Outage 6 08/18i2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Closure Head Nuts B06.010.001 3RPV-26-209-1 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.002 3RPV-26-209-02 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.003 3RPV-26-209-03 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.004 3RPV-26-209-04 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.005 3RPV-26-209-05 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.006 3RPV-26-209-06 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.007 3RPV-26-209-07 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.008 3RPV-26-209-08 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A

( C.

EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retalnina INSERVICE INSPECTION PLAN MANAGEMENT Boltina, Greater than 2" In Diameter Inservice Inspection Database Management System Plan Report

• LReaetor V/essel Oconee 3 Page 5 Inservice Inspection Plan for Interval 3 Outage 6 08/18)2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.009 3RPV-26-209-09 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.025 3RPV-26-209-61 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B08.010.026 3RPV-28-209-26 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.027 3RPV-26-209-27 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.028 3RPV-26-209-28 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A 806.010.029 3RPV-26-209.29 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.030 3RPV-26-209.30 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.031 3RPV-26-209-31 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.032 3RPV-26-209-32 OM-2201-52 NDE-25 MT CS 9.25d Closure Head Nut 50 B&W 149922 1.300 Class A

(. C EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retainina INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater than 2" In Diameter Inservice Inspection Database Management System Plan Report WReactor Vessel Oconee 3 Page 6 Inservlce Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.033 3RPV-26-209-33 OM-2201-52 NDE.25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.034 3RPV-26-209-67 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.035 3RPV-26-209-35 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.051 3RPV-26-209-51 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.052 3RPV-26-209-52 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.053 3RPV-26-209-53 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.054 3RPV-26-209-54 OM.2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.055 3RPV-26-209-55 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.056 3RPV-26-209-56 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A

( ( (

EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retainina INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater than 2" In Diatrieter Inservice Inspection Database Management System Plan Report WReator Vessel Oconee 3 Page 7

._ _ Inservice Inspection Plan for Interval 3 Outage 6 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REO MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.010.057 3RPV-26-209-57 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.058 3RPV-26-209-58 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.059 3RPV-26-209-59 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A B06.010.060 3RPV-26-209-60 OM-2201-52 NDE-25 MT CS 9.250 Closure Head Nut 50 B&W 149922 1.300 Class A Total B06.010 Items: 30

EOC 20 DUKE ENERGY CORPORATION CAEORY B-G-1 PressureRetaining INSERVICE INSPECTION PLAN MANAGEMENT Boltig, reterthen 2"InDIiameter Inservice Inspection Database Management System Plan Report Oconee 3 Page 8 ifeaIor Vessel 0811812003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBE.RS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Closure Studs, when removed -

B06.030.001 3RPV-25-209-01 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM*2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI UT-5 B06.030.001A 3RPV-25-209-01 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length63.2500 Class A OM-2201-51 B06.030.002 3RPV-25-209-02 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI.UT-5 B06.030.002A 3RPV-25-209-02 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250*

Class A OM-2201-51 B06.030.003 3RPV-25-209-03 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Lengt63.250, Class A OM.2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.003A 3RPV-25-209-03 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.Ispect when removed.Stud

- 50 B&W 149922 0.000 Leng*-3.250-Class A OM-2201-51 B06.030.004 3RPV-25-209-04 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3014)

Procedure # PDI-UT-5 B06.030.004A 3RPV-25-209-04 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51

EOC 20

( (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retainina INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater than 2" In Diameter Inservice Inspection Database Management System Plan Report Reactor Vessel Oconee 3 Page 9 Inservice Inspection Plan for Interval 3 Outage 6 08f18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWt NUMBERS PROC INSP REO MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.005 3RPV-25-209-05 OM-2201 -52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250 Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # POI-UT-5 B06.030.005A 3RPV-25-209-05 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspoct when removed.Stud 50 B&W 149922 0.000 Length-63250" Class A OM-2201-51 B06.030.006 3RPV-25-209-06 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-3250 Class A OM-2201-51 Note: Added cal block (FM. Addenda ONS3-014)

Procedure # PD1-UT-5 B06.030.00BA 3RPV-25-209-06 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2508 Class A OM-2201-51 B06.030.007 3RPV-25-209-07 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PD1-UT-5 B06.030.007A 3RPV-25-209-07 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201 -51 B06.030.008 3RPV-25-209-08 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.008A 3RPV-25-209-08 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201 -51 B06.030.009 3RPV-25-209-09 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250*

Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PD1-UT-5

EOC 20 C. C (

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retalning INSERVICE INSPECTION PLAN MANAGEMENT Boltincg. Greater than 2" In Diameter Inservice Inspection Database Management System Plan Report t Y~~~~e Oconee 3 Page 10 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS B06.030.009A 3RPV-25-209-09 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 B06.030.025 3RPV-25-209-61 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.025A 3RPV-25-209-61 OM-2201 -52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 B06.030.026 3RPV-25-209-26 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.026A 3RPV-25-209-26 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250-Class A OM-2201 -51 806.030.027 3RPV-25-209-27 OM-2201 -52 See Corn UT CS 6.500 40420 Reactor Closure Stud.lnspect when rernoved.Stud 50 B&W 149922 0.000 Length-63250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure I PDI-UT-5 B06.030.027A 3RPV-25-209-27 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.Inspet when removed.Stud 50 B&W 149922 0.000 Length-63.250-Class A OM-2201-51 B06.030.028 3RPV-25-209-28 OM-2201 -52 See Corm UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250 Class A OM-2201-51 Note: Added cal block (Re1. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.028A 3RPV-25-209-28 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51

(7 C EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Boltina. Greater than 2" In Diameter Inservice Inspection Database Management System Plan Report Reeactor Vessel Oconee 3 Page 11 InservIce Inspectlon Plan for Interval 3 Outage 6 081 8203 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B06.030.029 3RPV-25-209-29 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.029A 3RPV-25-209-29 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 B06.030.030 3RPV-25-209-30 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.nspet when removed.Stud 50 B&W 149922 0.000 Length-63.250 Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.030A 3RPV-25-209-30 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnpect when rernoved.Stud 50 B&W 149922 0.000 Length-63250-Class A OM-2201-51 806.030.031 3RPV-25.209-31 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250 Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.031A 3RPV-25-209-31 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250*

Class A OM-2201-51 B06.030.032 3RPV-25-209-32 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250a Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.032A 3RPV-25-209-32 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201 -51 B06.030.033 3RPV-25-209-33 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.1nsect when removed.Sturl 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5

C EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT RlttInn- fGrptpr thnn 2" In Dlametar InservIce Inspection Database Management System Plan Report etor Vessel Oconee 3 Page 12 Inservice Inspection Plan for Interval 3 Outage 6 08/18/003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS B06.030.033A 3RPV-25-209-33 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 B06.030.034 3RPV-25-209-67 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.034A 3RPV-25-209-67 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 B06.030.035 3RPV-25-209-35 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.035A 3RPV-25-209-35 OM-2201.52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 B06.030.051 3RPV-25-209-51 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.051 A 3RPV-25-209-51 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 B06.030.052 3RPV-25-209-52 OM-2201 -52 See Corn UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250 Class A OM-2201 -51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.052A 3RPV-25-209-52 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud. nspect when removed.Stud 50 B&W 149922 0.000 Length-63.250*

Class A OM-2201-51

( (

EOC 20 DUKE ENERGY CORPORATION CAEORY BG-1.Pressure Retaining INSERVICE INSPECTION PLAN MANAGEMENT Botigreater than2" In Diameter Inservice Inspection Database Management System Plan Report ILeacto Vessel Oconee 3 Page 13 08/18/2003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIANTHK CAL BLOCKS COMMENTS B06.030.053 3RPV-25-209-53 OM-2201 -52 See Corn UT CS 6.500 40420 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201 -51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.053A 3RPV-25-209-53 OM-2201 -52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 B06.030.054 3RPV-25-209-54 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI4UT-S B06.030.054A 3RPV-25-209-54 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250' Class A OM-2201.51 B06.030.055 3RPV-25-209-55 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.nspect when removed.Stud 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.05SA 3RPV-25-209-55 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250' Class A OM-2201-51 B06.030.056 3RPV-25-209-56 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250' Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.056A 3RPV-25-209-56 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63250' Class A OM-2201-51 B06.030.057 3RPV-25-209-57 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnsnect when removed.Stud 50 B&W 149922 0.000 Length-63.250 Class A OM-2201 -51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5

( (

EOC 20 DUKE ENERGY CORPORATION CATEGORY~ B-G-1. Pressure Reta Ining INSERVICE INSPECTION PLAN MANAGEMENT Botng, Geater then2"In Diameter Inservice Inspection Database Management System Plan Report EReatr Vessel Oconee 3 Page 14 0818/2003 InservIce Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIANTHK CAL BLOCKS COMMENTS B06.030.057A 3RPV-25-209-57 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 B06.030.058 3RPV-25-209-58 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.058A 3RPV-25-209-58 OM-2201.52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 B06.030.059 3RPV-25-209-59 OM-2201-52 See Com UT CS 6.500 40420 Reactor Closure Stud.Inspect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.059A 3RPV-25-209-59 OM-2201-52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 B06.030.060 3RPV-25-209-60 OM-2201-52 See Corn UT CS 6.500 40420 Reactor Closure Stud.lnspect when removed.Stud 50 B&W 149922 0.000 Length-63.250" Class A OM-2201-51 Note: Added cal block (Ref. Addenda ONS3-014)

Procedure # PDI-UT-5 B06.030.060A 3RPV-25-209-60 OM-2201 -52 NDE-25 MT CS 6.500 Reactor Closure Stud.lnsect when removed.Stud 50 B&W 149922 0.000 Length-63.2500 Class A OM-2201-51 Total 806.030 Items: 60

EOC 20

(. C.

DUKE ENERGY CORPORATION CATEGORY B-G-1. Pressure Retalninq INSERVICE INSPECTION PLAN MANAGEMENT Bolting. Greater than 2" In Diameter Inservice Inspection Database Management System Plan Report Oconee 3 Page 15 ITEact N Vessel Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER IDNUMBER SYS IISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• Closure Washers, Bushings

• 106.050.001 3RPV-WASH-BUSH OM-2201-52 QAL-13 VT-1 CS 0.000 Reactor Vessel Closure Washers & Bushings.

50 B&W 149922E 0.000 Inspect washers and bushings for the following Class A reactor vessel studs: 1-9, 25-35, 51-60.

Total B06.050 Items: 1 Total B06 Items: 91

EOC 20

( ( (

DUKE ENERGY CORPORATION CATEGORY B-G-2. Pressure Retainina INSERVICE INSPECTION PLAN MANAGEMENT Boltina. 2" And Less In Diameter Inservice Inspection Database Management System Plan Report ITEMtNmU eneRators Oconee 3 Page 16 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS

• • Bolts, Studs, and Nuts

• B07.030.002 3S¢A-LMW-BOLTS B&W 145470E QAL-13 VT-1 CS 2.000 Steam Generator 3A Lower Head Manway Studs 50 0.000 and Nuts; 16 studs & nuts; length = 11.5 Inches Class A B07.030.003 3SGB-UMW-BOLTS B&W 145470E OAL-13 VT-1 CS 2.000 Steam Generator 3B Upper Head Manway Studs so 0.000 and Nuts; 16 studs & nuts; length = 11.5 Inches Class A B07.030.007 3SGB-UHIC-BOLTS B&W 145470E OAL-13 VT-1 CS 1.000 Steam Generator 3B Upper Head Inspection Cover 50 0.000 Bolting Class A B07.030.008 3SGB-LHIC-BOLTS B&W 145470E OAL-13 VT-1 CS 1.000 Steam Generator 3B Lower Head Inspection Cover 50 0.000 Bolting Class A Total B07.030 Items: 4

(rA ( 1 EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-2 Pressure RetaInIng INSERVICE INSPECTION PLAN MANAGEMENT Boltng,2"And LessIn Diameter Inservice Inspection Database Management System Plan Report IMNlves Oconee 3 Page 17 Inservice Inspection Plan for Interval 3 Outage 6 08/1812003

_ITEM NUMBER ID NUMBER SYS ISO/)DWG NUMBERS PROC INSP REQ MAT/SCH DIANTHK CAL BLOCKS COMMENTS

• Bolts, Studs, and Nuts B07.070.003 3-53A-CF13 OM-245-001 OAL-13 VT-1 NA 0.000 Core Flood B; Valve 3CF-13 Bolting; 53A 0.000 Inspect only one of the tollowing valves: 3CF-1 1, Class A 3CF-12, 3CF-13, 3CF-14 B07.070.007 3-53A-LP1 OM-201-165 OAL-13 VT.1 NA 0.000 Low Pressure Injection Valve 3LP-1 Bolting 53A 0.000 Class A B07.070.019 3-51A-HP188 OM-246-017 OAL-13 VT-1 NA 0.000 High Pressu Infection Vave 3-HP188 Bolting 51A 0.000 Class A Total 907.070 Hems: 3

C C (

EOC 20 DUKE ENERGY CORPORATION CATEGORY B-G-2.-Pressure Retalninq INSERVICE INSPECTION PLAN MANAGEMENT Boltng,2"And LessIn Diameter Inservice Inspection Database Management System Plan Report Oconee 3 Page 18 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO,/DW( NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS

• Bolts, Studs, and Nuts

• B07.080.001 3-RPV-CRD-BOLTS B&W 149902E QAL-13 VT-1 NA 0.000 Inspect Only If Disassembled; See Request for 50 B&W 149919E 0.000 Refief ONS-004 & ONS-005; 8 bolts per CRD Class A Housing; (14 Connections Inspected up to this Date). Ref. Addendum ONS3-020 -connection not disassembled during 3EOC15.

B07.080.002 3-RPV-CRD-RINGS B&W 149902E QAL-13 VT-1 NA 0.000 Inspect Only If Disassembled; See Request for 50 B&W149919E 0.000 Refief ONS-004 & ONS-005; 1 Pair per CRD Class A Housing; (14 Connections Inspected up to this date).

Ref. Addendum ONS3-020 - connection not disassembled during 3EOC15.

Total B07.080 Items: 2 Total B07 Items: 9

EOC 20

(

DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retainina Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report PS 4 or Lar-er Oconee 3 Page 19 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DINATHK CAL BLOCKS COMMENTS

• • -- Circumferential Welds B09.011.014 3-PIB2-1 ISI-OCN3-010 NDE-600 UT CS 33.500 Circumferential 50 OFD-100A-3.1 2.330 Class A Term end Nozzle SK/ 3B Nozzle to Pipe B09.011.014A 3-PIB2-1 ISI-OCN3-010 NDE-25 MT CS 33.500 Circumferential 50 OFD-100A-3.1 2.330 Class A Term end Nozzle S/G 3B Nozzle to Pipe 809.011.023 3-PDB2-1 ISI-OCN3-014 NDE-600 UT SS 33.500 Circumferential 50 OFD-100A-3.1 2.330 Class A Term end Nozzle 382 Pump Nozzle to Safe End B09.011.023A 3-PDB2-1 ISI-OCN3-014 NDE-35 PT SS 33.500 Circumferential 50 OFD-100A-3.1 2.330 Class A Term end Nozzle 382 Pump Nozzle lo Safe End B09.011.027 3-PSL-3 ISI-OCN3-015 NDE-600 UT SS 10.000 Procedure PDI-UT-2 may be used.

Circumferential 50 OFD-10OA-3.2 1.000 Class A Stress weld Pipe to Elbow B09.011.027A 3-PSL-3 ISI-OCN3-015 NDE-3S PT SS 10.000 Circumferential 50 OFD-100A-3.2 1.000 Class A Stress weld Pipe to Elbow B09.011.030 3-PSL-6 ISI-OCN3-015 NDE-600 UT SS 10.000 Procedure PDI-UT-2 may be used.

Circumferential 50 OFD-100A-3.2 1.000 Class A Stress weld Pipe to Elbow B09.011.030A 3-PSL-6 ISI-OCN3-015 NDE-35 PT SS 10.000 Circumferential 50 OFD-1 00A-3.2 1.000 Class A Stress weld Pipe to Elbow

f C EOC 20 DUKE ENERGY CORPORATION CATEGORY B-J Pressure RetanIng Welds In INSERVICE INSPECTION PLAN MANAGEMENT InservIce Inspection Database Management System Plan Report Oconee 3 Page 20 iNS oLarger 08118/2003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B09.011.036 3HP-241-9 3HP-241 NDE-600 UT SS 4.000 This weld was listed previously as 3.51A-63-9 until Circumferential 51A OFD-101A-3.4 0.531 iso 3-51A -63 was redrawn.

Class A Pipe to Procedure PDI-UT-2 may be used.

Tee 809.011.036A 3HP-241-9 3HP-241 NDE-35 PT SS 4.000 This weld was listed previously as 3-51A-63-9 until Circumferential 51A OFD-101A-3.4 0.531 iso 3-51A -63 was redrawn.

Class A Pipe to Tee 809.011.050 3-53A-17-8 3-53A-17 NDE-600 UT SS 10.000 Procedure PDI-UT-2 may be used.

Circumferential S3A OFD-102A-3.2 1.000 Class A OFD-102A-3.3 Elbow to Pipe B09.011.050A 3-53A-17-8 3-53A-17 NDE-35 PT SS 10.000 Circumferential 53A OFD-102A-3.2 1.000 Class A OFD-102A-3.3 Elbow to Pipe B09.011.051 3LP-131-2 3LP-131 NDE-600 UT SS 12.000 This weld was listed previously as 3-53A-18-2 until Circumferential 53A OFD-102A-3.1 1.125 iso 3-53A-18 was revised. (See Rev. 11)

Class A Pipe to Procedure PDI-UT-2 may be used.

Valve 3LP-1 B09.011.051A 3LP- 131-2 3LP-1 31 NDE-35 PT SS 12.000 This weld was listed previously as 3-53A-1 8-2 until Circumferential 53A OFD-102A-3.1 1.125 iso 3-53A-18 was revised. (See Rev. 11)

Class A Pipe to Valve 3LP-1 Total B09.011 Items: 14

EOC 20

(

DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retalning Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report Wess Then NPS 4 Oconee 3 Page 21 E InservIce Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISOIDWG NUME3ERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS Circumferential Welds

• B09.021.002 3-50-20-11 3-50-20 NDE-35 PT SS 1.500 Circumferential 50 OFD-100A-3.1 0.281 Class A Pipe to Elbow B09.021.013 3-PSP-25 ISI-OCN3-016 NDE-35 PT SS 1.500 Circumferential 50 OFD-100A-3.2 0.281 Class A Stress weld Tee to Reducer B09.021.015 3-PSP-5 ISI-OCN3-016 NDE-35 PT SS 2.500 Circumferential 50 OFD-100A-322 0.375 Class A Stress weld Pipe to Elbow B09.021.017 3-PSP-7 ISI-OCN3-016 NDE-35 PT SS 2.500 Circumferential 50 OFD-100A-3.2 0.375 Class A Stress weld Tee to Pipe B09.021.026 3-51A-61-17 3-51A-61 NDE-35 PT SS 2.500 Circumferential 51A OFD-101A-3.4 0.375 Class A Pipe to Elbow B09.021.027 3HP-242-23 3HP-242 NDE-35 PT SS 2.500 This weld was 1ste previfuly as 3-51A-81-23 until Circumferential 51A OFD-101A-3.4 0.375 iso 3-51A .81 was redrawn.

Class A Pipe to Elbow B09.021.053 3-51 A-69-35 3-51A-69 NDE-35 PT SS 2.500 Circumferential 61A OFD-100A-3.1 0.375 Class A Pipe to Elbow 809.021.054 3-51A-69-43 3-51A-69 NDE-35 PT SS 2.500 Circumferential 51A OFD-100A-3.1 0.375 Class A Elbow to Pipe

EOC 20

(- (

DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT PIpIngi Inservlce Inspection Database Management System Plan Report Less Than NPS 4 Oconee 3 Page 22 Inservice Inspection Plan for Interval 3 Outage 6 0811812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI VIBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS B09.021.055 3-51A-69-46 3-S1A-69 NDE-35 PT SS 2.500 Circumferential 51A OFD-100A-3.1 0.375 Class A Pipe to Tee B09.021.056 3-51A-69-50 3-51 A-69 NDE-35 PT SS 2.500 Circumferential 51A OFD-100A-3.1 0.375 Class A Pipe to Elbow B09.021.063 3HP-240-8 3HP-240 NDE-35 PT SS 2.500 This weld was listed previously as 3-51A-64-8 until Circumferential 51A OFD-101A-3.4 0.375 Iso 3-51A -64 was redrawn.

Class A Elbow to Pipe B09.021.065 3LP-130-12 3LP-130 NDE-35 PT SS 3.000 Circumferential 53A OFD-102A-3.1 0.438 Class A Pipe to Reducer Total B09.021 Items: 12

EOC 20

( (2, C'i DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retaining Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report TrEnNUBR __ConnectionUMWelds Oconee 3 Page 23 Inservice Inspectlon Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REO MAT/SCH DIA/THK CAL BLOCKS COMMENTS Less Than NPS 4 A B09.032.003 3-PIB2.10 ISI-OCN3-010 NDE-35 PT CS-Inconel 12.000 The NPS of the branch line Is 1.5 inches.

Branch 50 OFD-100A-3.1 2.250 Class A Pipe to Dissimilar Nozzle Drain Nozzle Total 909.032 Items: 1

EOC 20 C ( (

DUKE ENERGY CORPORATION CATEGORY B-J. Pressure Retainina Welds In INSERVICE INSPECTION PLAN MANAGEMENT Piping Inservice Inspection Database Management System Plan Report Oconee 3 Page 24 ket Welds Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS B09.040.004 3-50-152-3 3-50-152 NDE-35 PT SS 1.500 Socket 50 OFD-100A-3.2 0.281 Class A Elbow to Pipe B09.040.005 3-50-152-5 3-50-152 NDE-35 PT SS 1.500 Circumferential 50 OFD-100A-3.2 0.281 Class A Full Coupling to Pipe B09.040.012 3-50-20-32 3-50-20 NDE-35 PT SS 1.500 Socket 50 OFD-100A-3.1 0.281 Class A Pipe to Valve 3RC-46 B09.040.013 3-50-21-71 3-50-21 NDE-35 PT SS 1.500 Socket 50 OFD-100A-3.1 0.281 Class A Pipe to Valve 3RC-24 Total B09.040 Items: 4 Total B09 Items: 31

(

EOC 20 DUKE ENERGY CORPORATION CATEGORY C-A. Pressure RetaIninq Welds INSERVICE INSPECTION PLAN MANAGEMENT In Pressure Vessels Inservice Inspection Database Management System Plan Report ftCircumferntialWeds Oconee 3 Page 25 08/18/2003

. Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIATHK CAL BLOCKS COMMENTS C01.010.001 3-SGA-WG8-1 ISI-OCN3..003 NDE-620 UT CS 138.000 40339 SIG A Shell to Shell PC.1 to PC.2 Ref. PIR Circumferential OM-2201 .222 See Com 4.188 50236 3-092-0371 Class B Shell to Inspection In outage 2 Isfor surveillance from the Shell third period of the second interval and should not be counted in the third interval percentages. Inspection in outage 6 Is for third Interval requirements and Isto be counted In the percentages.

Calibration block 50236 Is being added as a result of revision 8 to examination procedure NDE-620.

Procedure PDI-UT-6 may be used.

C01.010.002 3-SGA-WG8-2 ISI-OCN3-003 NDE-620 UT CS 138.000 40339 S/G A Shell to Shell PC.2 to PC.3 Ref. PIR Circumferential OM-2201-222 See Corn 4.188 50236 3-092-0371 Class B Shell to Inspection in outage 2 Is for surveillance from the Shell third period of the second Interval and should not be counted In the third Interval percentages. Inspection In outage 6 Isfor third Interval requirements and Is to be counted in the percentages.

Calibration block 502361s being added as a result of revision 8 to examination procedure NDE-620.

Procedure PDI-UT-6 may be used.

Total C01.010 Items: 2 Total C01 Items: 2

EOC 20

( C DUKE ENERGY CORPORATION CATEGORY C-B. Pressure Retaining Nozzle INSERVICE INSPECTION PLAN MANAGEMENT Welds In Vessels Inservice Inspection Database Management System Plan Report Nozzles With Reinforcing Plate In Vessels> 1>2 Oconee 3 Page 26 in. Nominal Thickness Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NIUMBERS PROC INSP REQ MAT/SCH DIANTHK CAL BLOCKS COMMENTS go Reinforcing Plate Welds to Nozzle and Vessel C02.031.002 3-LPCB-INLET OM-2201-0277 NDE-35 PT Ss 16.000 LP Cooler 3B Inlet Nozzle to Shell Weld Circumferential 53A OFD-102A-3.2 0.500 (Inlet Nozzle to Re-inforcing Plate weld)

Class B Inlet Nozzle to Shell C02.031.003 3-LPCB-OUTLET OM-2201-0277 NDE-35 PT SS 16.000 LP Cooler 3B Outlet Nozzle to Shell Weld Circumferential 53A OFD-102A-3.2 0.500 (Outlet Nozzle to Re-inforcing Plate weld)

Class B Outlet Nozzle to Shell Total C02.031 Items: 2 Total C02 Items: 2

( C EOC 20 DUKE ENERGY CORPORATION CATEGORY C-C. Integral Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Iressure Vessels Oconee 3 Page 27 Inservice Inspection Plan for Interval 3 Outage 6 0811812003 ITEM NUMBER ID NUMBER SYS ISOIDWGINUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS Integrally Welded Attachments **

C03.010.005 3SGB-WG84-XY B&W-149824E NDE-25 MT CS 0.000 SGB FDW. HDR. ATTACH.X-Y QUAD. NEAREST 03 OM 2201-1451 1.000 TO X-AXIS Class B C03.010.006 3SGB-WG84-YX B&W-149824E NDE-25 MT CS 0.000 SGB FDW. HDR. A1TACH.Y-X QUAD. NEAREST 03 OM 2201-1451 1.000 TO Y-AXIS Class B Total C03.010 Items: 2

EOC 20 c ( (.

DUKE ENERGY CORPORATION CATEGORY C-C. Integral Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, P1RIng, Pumps. And Valves Inservice Inspection Database Management System Plan Report WEiping Oconee 3 Page 28 Inservice Inspectlon Plan for Interval 3 Outage 6 081 8/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMI 3ERS PROC INSP REO MAT/SCH DIANTHK CAL BLOCKS COMMENTS

• • • Integrally Welded Attachments go C03.020.002 3-01A-HIA 0-2480A NDE-25 MT CS 26.000 File no. OSC-1 334 Constant Support 01A OFD-122A-3.1 1.500 Prob. No.3-01-08 Class B 0-2490A-3(S) Main Steam System C03.020.004 3-01A-H4A 0-2481A NDE-25 MT CS 26.000 File no. OSC-1334 Rigid Restraint 01A OFD-122A-3.1 NDE-35 0.750 Prob. No.3-01-08 Class B 0-2490A.3(S) Main Steam System PT examination may be pefformed on areas of the attachment where MT examination Is not possible due to limited access. PT perorrned i lieu of MT or along with the MT will provide 100% of examination coverage.

C03.020.006 3-01A-H5A 0-2481A NDE-25 MT CS 26.000 File no. OSC-1334 Rigid Restraint 01A OFD-122A-3.1 NDE-35 0.750 Prob. No. 3-01-08 Class B 0-2490A-3(S) Main Steam System PT examination may be performed on areas of the attachment where MT examination Is not possible due to limited access. PT performed In lieu of MT or along with the MT will provide 100% of examination coverage.

C03.020.007 3-01A-H5B 0-2481A NDE-25 MT CS 26.000 File no. OSC-1 334 Rigid Restraint 01A OFD-122A-3.1 NDE-35 0.750 Prob. No. 3-01-07 Class B 0-2490A-2(S) Main Steam System PT examination may be performed on areas of the attachment where MT examination Is not possible due to limited access. PT performed in lieu of MT or along with the MT will provide 100% of examination coverage.

C03.020.01 8 3-14B-H20D 0-2479A NDE-25 MT CS 8.000 File No. OSC-1344-06 Rigid Restraint 14B OFD-124B-3.2 1.500 Page No. 6(1) 38 Class B Problem No. 3-14B-09; System 14B C03.020.019 3-14B-H22A 0-2480A NDE-25 MT CS 8.000 File No. OSC-134406 Rigid Restraint 14B OFD-124B-3.2 NDE-35 1.500 Page No. 6(2) 38 Class B Problem No. 3-14B-08; System 14B PT examination may be performed on areas of the

( C (.

EOC 20 DUKE ENERGY CORPORATION CATEGORY C-C. Integral Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping. Pumps, And Valves Inservice Inspection Database Management System Plan Report Oconee 3 Page 29 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS attachment where MT examination Is not possible due to limited access. PT performed In lieu of MT or along with the MT will provide 100% of examination coverage.

C03.020.020 3-14B-H22D 0-2480A NDE-25 MT CS 8.000 File No. OSC-1344-06 Rigid Restraint 14B OFD-124B-3.2 NDE-35 1.500 Page No. 6(1) 38 Class B Problem No. 3-146-09; System 146 PT examination may be performed on areas of the attachment where MT examination is not possible due to limited access. PT performed In lieu of MT or along with the MT will provide 100% of examination coverage.

C03.020.028 3-53B-R2 5-0-2436D NDE-35 PT SS 10.000 File No. OS552 Rigid Restraint 53B OFD-102A-3.2 1.000 Page 43.3 Class B Problem No. 3-53-06; System 53B C03.020.031 3-54A-H25 3-0-2439A NDE-35 PT SS 8.000 File No. OSC-556 Rigid Restraint 54A OFD-103A-3.1 1.000 Page No. 64.1 Class 6 Problem No. 3-54-03 C03.020.032 3-54A-H35 3-0-2435B NDE-35 PT SS 8.000 File No. OSC-554 Spring Hgr 54A OFD-103A-3.1 1.000 Page No. 47.1 Class B Problem No. 3-54-01: Reactor Bld Spray C03.020.033 3-54A-H39 3-0-2437B NDE-35 PT SS 8.000 File No. OSC-554 Spring Hgr 54A OFD-103A-3.1 1.000 Page No.47.1 Class B Problem No. 3-54-01; Reactor Bld Spray C03.020.043 3SGB-WG87-XY B&W-149824E NDE-25 MT CS 0.000 SG8 FDW. HDR. ATTACH. X-Y OUAD. NEAREST 03 1.000 TO X-AXIS Class B C03.020.044 3SGB-WG87-YX B&W-149824E NDE-25 MT CS 0.000 SGB FDW. HDR. ATTACH.Y-X QUAD. NEAREST 03 1.000 TO Y-AXIS Class B

EOC 20

( c DUKE ENERGY CORPORATION CATEGORY C-C. Integral Attachments For INSERVICE INSPECTION PLAN MANAGEMENT Vessels, Piping Pumps, And Valves Inservice Inspection Database Management System Plan Report EPIina Oconee 3 Page 30 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Total C03.020 Items: 13 Total C03 Items: 15

EOC 20 C ( C DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retalning Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or High Alloy Plpinq Inservice InspectIon Database Management System Plan Report Pt ina Welds >= 3/8 In. Nominal Wall Thickness Oconee 3 Page 31 Hor PIPing > NPS4 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Circumferential Weld C05.011.001 3LP-134-64 3LP-134 NDE-600 UT SS 10.000 This weld was listed previously as 3-53A-1 5-64 until Circumferential 53A OFD-102A-3.2 1.125 iso 3-53A -15 (2) was redrawn.

Class B OFD-102A-3.3 Valve 3LP-47 to Procedure PDI-UT-2 may be used.

Pipe C05.011.001A 3LP-134-64 3LP-134 NDE-35 PT SS 10.000 This weld was listed previously as 3-53A-15-64 until Circumferential 53A OFD-102A-3.2 1.125 iso 3-53A-1S (2) was redrawn.

Class B OFD-102A-3.3 Valve 3LP-47 to Pipe C05.011.005 3-53A-17-17 3-53A-17 NDE-600 UT SS 10.000 Procedure PDI-UT-2 may be used.

Circumferential 53A OFD-102A-3.2 1.125 Class B Valve 3LP-48 to Pipe C05.011.005A 3-53A-17-17 3-53A-17 NDE-35 PT SS 10.000 Circumferential 53A OFD-102A-3.2 1.125 Class B Valve 3LP-48 to Pipe Total C05.011 Items: 4

EOC 20 C

DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or Hiah Alloy Piping Inservice Inspection Database Management System Plan Report P1 In Welds 5 n No Wall For PI2ng > Oconee 3 Page 32 MNPS 2 And <= NPS Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS

• • t CIrcumferentlal Weld C05.021.003 3-51A-101-8 3-51A-101 NDE-600 UT SS 2.500 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.2 0.375 Class B Elbow to Pipe C05.021.003A 3-51A-101-8 3-51A-101 NDE-35 PT SS 2.500 Circumferential 51A OFD-101A-3.2 0.375 Class B Elbow to Pipe C05.021.004 3-51A-101-9 3-51A-101 NDE-600 UT SS 2.500 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.2 0.375 Class B Elbow to Elbow C05.021.004A 3-51A-101-9 3-51A-101 NDE-35 PT SS 2.500 Circumferential 51A OFD-101A-3.2 0.375 Class B Elbow to Elbow C05.021.005 3-51A-118-1 3-51 A-1 18 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

CircumferentIal 51A OFD-101A-3.4 0.531 Class B Pipe to Elbow C05.021.005A 3-51A-118-1 3-51A- 118 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Pipe to Elbow C05.021.008 3-51A-118-21 3-51A-118 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.4 0.531 Class B Pipe to Elbow C05.021.008A 3-51A-118-21 3-51A-118 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Pipe to Elbow

EOC 20 (7 (

DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or Hlih Alloy Piping Inservice Inspection Database Management System Plan Report n Welds> 15 In.Nom Wall For PtRin >= Oconee 3 Page 33 NPS 2 And <= NPS4 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REO MATISCH DIA/THK CAL BLOCKS COMMENTS C05.021.016 3-51A-120-10 3-S1A-120 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-1O1A-3.4 0.531 Class B Flange to Pipe C05.021.016A 3-51A-120-10 3-51A.120 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Flange to Pipe C05.021.021 3-S1A-121-22 3-51A-121 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-1OlA-3.4 0.674 Class B Pipe to Valve 3HP-409 C05.021.021A 3-51A-121-22 3-51A-121 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.674 Class B Pipe to Valve 3HP-409 C05.021.025 3-51A-140-19 3-51A-140 NDE-600 UT SS 2.500 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.1 0.375 Class B Elbow to Pipe C05.021.025A 3-51A-140.19 3-51A-140 NDE-35 PT SS 2.500 Circumferential 51A OFD-101A-3.1 0.375 Class B Elbow to Pipe C05.021.035 3-51A-52-20 3-51 A-52 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.3 0.531 Class B Tee to Valve 3HP-1 17 C05.021.035A 3-51A-52-20 3-51A-52 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.3 0.531 Class B Tee to Valve 3HP I I 7 C05.021.044 3-51 A-i 19-41 3-51 A-1 19 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.4 0.674 Class B Pipe to Valve 3HP-41 0

(;

EOC 20 DUKE ENERGY CORPORATION CATEGORY C-F-1, Pressure Retalning Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or Hiqh Alloy PinIng Inservice Inspection Database Management System Plan Report NPInina Welds > 115 In. Nom Wall For PI Ina >- Oconee 3 Page 34 NPS 2 And <= NPS 4 Inservice Inspection Plan for Interval 3 Outage 6 08fl/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS C05.021.044A 3-51A-119-41 3-51A-119 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.674 Class B Pipe to Valve 3HP-410 C05.021.046 3-51A-59-40 3-51A-59 NDE-600 UT SS 2.500 Procedure PDI-UT-2 may be used.

Circumferential 51A OFiD-101A-3.4 0.552 Class B Tee to Pipe C05.021.046A 3-51A-59-40 3-51A-59 NDE-35 PT SS 2.500 Circumferential 51A OFD-101A-3.4 0.552 Class B Tee to Pipe C05.021.056 3-51A-75-34 3-51A-75 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.4 0.531 Class B Tee to Valve 3HP-140 C05.021.056A 3-51 A-75-34 3-51A-75 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Tee to Valve 3HP-140 C05.021.057 3-51A-77-13 3-51A-77 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.1 0.531 Class B Elbow to Reducer C05.021.057A 3-51A-77-13 3-51A-77 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.1 0.531 Class B Elbow to Reducer C05.021.066 3-51A-87-8 3-51 A-87 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A-3.4 0.531 Class B Tee to Valve 3HP-029 C0.021.066A 3-51 A-87-8 3-51A-87 NDE-35 PT SS 4.000 Circumferential 51A 0FD-101A-3.4 0.531 Class B Tee to Valve 3HP-029

EOC 20

( C(

DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or High-Alloy Plplnn Inservice Inspection Database Management System Plan Report P1 n Welds> In. Norn Wall For PRIng >= Oconee 3 Page 35 NPS 2 And <= NPS Inservlce Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS __

C05.021.067 3-51A-87-9 3-51A-87 NDE-600 UT SS 4.000 Procedure PDI-UT-2 may be used.

Circumferential 51A OFD-101A.3.4 0.531 Class B Valve 3HP-029 to Pipe C05.021.067A 3-51A-87-9 3-51A-87 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Valve 3HP-029 to Pipe C05.021.075 3-51 A-i 18-4 3-51A-118 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Elbow to Procedure PDI-UT-2 may be used.

Elbow C05.021.075A 3-51A-118-4 3-51A-1 18 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Elbow C05.021.080 3-51A-140-26 3-51A-140 NDE-600 UT SS 2.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.1 0.344 block.

Class B Pipe to Procedure PDI-UT-2 may be used.

Reducer C05.021.080A 3-51A-140-26 3-51A-140 NDE-35 PT SS 2.000 Circumferential 51A OFD-101A-3.1 0.344 Class B Pipe to Reducer C05.021.085 3-51A-52-26 3-51A-52 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.3 0.531 block.

Class B Tee to Procedure PDI-UT-2 may be used.

Pipe C05.021.085A 3-51A-52-26 3-51A-52 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.3 0.531 Class B Tee to Pipe C05.021.090 3-51A-59-42 3-51A-59 NDE-600 UT SS 2.500 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.552 block.

Class B Tee to Procedure PDI-UT-2 may be used.

Valve 3HP. 122

C ( C EOC 20 DUKE ENERGY CORPORATION CATEGORY C-F-1, Pressure Retalning Welds INSERViCE INSPECTiON PLAN MANAGEMENT In Austenitlc SS or Hiqh Alloy Piping Inservice Inspection Database Management System Plan Report InPnpiWeWesd> 115 In.Non Wall For PIRng >= Oconee 3 Page 36 NPS 2 And <-= NPS4 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C05.021.090A 3-51A-59-42 3-51A-59 NDE-35 PT SS 2.500 Circumferential 51A OFD-101A-3.4 0.552 Class B Tee to Valve 3HP-122 C05.021.095 3-51A-87-16 3-51A-87 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Flange to Procedure PDI-UT-2 may be used.

Pipe C05.021.095A 3-51A-87-16 3-51A-87 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Flange to Pipe C05.021.109 3-51A-66-12 3-51A-66 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Pipe to Procedure PDI-UT-2 may be used.

Elbow C05.021.109A 3-51A-66-12 3-51A-66 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Pipe to Elbow C05.021.110 3-51A-66-25 3-51A-66 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Pipe to Procedure PDI-UT-2 may be used.

Elbow C05.021.110A 3-51A-66-25 3-51A-66 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Pipe to Elbow C05.021.111 3HP-365-37 3HP-365 NDE-600 UT SS 4.000 Reference Reauest for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.674 block.

Class B Tee to This weld was listed previously as 3-51 A-66-37 on Pipe iso 3-51 A-66 until it was transferred to Iso 3HP-365.

Procedure PDI-UT-2 may be used.

EOC 20 C

DUKE ENERGY CORPORATION CATEGORY C-F-i Pressure Retainin Welds INSERViCE INSPECTION PLAN MANAGEMENT In Austenitic SS or High-Allpy PIplng Inservice Inspection Database Management System Plan Report NPt Ina Welds > I n, Nom Wall For P1RIna >- Oconee 3 Page 37 ENPS 2And c=-NPS4 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS C05.021.111A 3HP-365-37 3HP-365 NDE-35 PT SS 4.000 This weld was listed previously as 3-51A-B6-37 on Circumferential 51A OFD-101A-3.4 0.674 Iso 3-51 A-66 until It wtransferred toiso 3HP-365.

Class B Tee to Pipe C05.021.112 3HP-343-4 3HP-343 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.1 0.531 block.

Class B Elbow to This weld was listed previously as 3-51 A-79-4 on iso Elbow 3-51A-79 until it was transferred to iso 3HP-343.

Procedure PDl-UT-2 may be used.

C05.021.112A 3HP-343-4 3HP-343 NDE-35 PT SS 4.000 This weld was listed previously as 3-51 A-79-4 on Iso Circumferential 51A OFD-101A-3.1 0.531 3-51A-79 until Rwas transferred to Iso 3HP-343.

Class B Elbow to Elbow C05.021.113 3-51A-86-8 3-51A-86 NDE-600 UT SS 4.000 Procedure PDl-UT-2 may be used.

Circumferential 51A OFD-101A.3.4 0.531 Class B Elbow to Pipe C05.021.113A 3-51A-86-8 3-51A-86 NDE-35 PT SS 4.000 CIrcumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Pipe C05.021.114 3-51A-86-14 3-51A-86 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Elbow to Procedure PDI-UT-2 may be used.

Pipe C05.021.114A 3-51A-86-14 3-51A-86 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Pipe C05.021.115 3-51A-86-15C 3-51A-86 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Elbow to Procedure PDi-UT-2 may be used.

Pipe

EOC 20 ccp ( (

DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retalning Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or Hlgh Alloy Piping Inservice Inspection Database Management System Plan Report MPini Welds > 1 5 In. Norn Wall For P1RIn > Oconee 3 Page 38 NNPS 2And <= NPS4 Inservice Inspectlon Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS C05.021.115A 3-51A-86-15C 3-51A-86 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Pipe C05.021.116 3-51A-86-22 3-51A-86 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Elbow to Procedure PDI-UT-2 may be used.

Pipe C05.021.116A 3-51A-86-22 3-51A-86 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Pipe C05.021.117 3-51A-86-3 3-51A-86 NDE-600 UT SS 4.000 Reference Request for Relief 95-02 for calIbration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Elbow to Procedure PDI-UT-2 may be used.

Pipe C05.021.117A 3-51A-86-3 3-51A-86 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Pipe C05.021.118 3-51A-86-7 3.51A-86 NDE-600 UT SS 4.000 Reference Request for Reef 9502 for calibration Circumferential 51A OFD-101A-3.4 0.531 block.

Class B Elbow to Procedure PDI-UT-2 may be used.

Elbow C05.021.118A 3-51A-86-7 3-51A-86 NDE-35 PT SS 4.000 Circumferential 51A OFD-101A-3.4 0.531 Class B Elbow to Elbow Total C05.021 Items: 58

C. C, EOC 20 DUKE ENERGY CORPORATION CATEGORY C-F-1. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or High Alloy Piping Inservice Inspection Database Management System Plan Report tocket Welds Oconee 3 Page 39 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NIIMBERS _ PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS C05.030.003 3-51 B.30-12 3-51 B-30 NDE-35 PT SS 2.000 Socket 51B OFD-101A-3.2 0.154 Class B Welding Boss to Pipe C05.030.006 3-51 B-59-22A 3-51 B-59 NDE-35 PT SS 2.000 Socket 51 B OFD-101A-3.2 0.154 Class B Pipe to Full Coupling Total C05.030 Items: 2

( ( C',

EOC 20 DUKE ENERGY CORPORATION CATEGORYC-1. Pressure RetaIning Welds INSERVICE INSPECTION PLAN MANAGEMENT In Austenitic SS or High Alloy PipIng Inservice Inspection Database Management System Plan Report Oconee 3 Page 40 ITEMNBERanchConnections of Branch PInin >= Inservice Inspeetlon Plan for Interval 3 Outage 6 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NL.UMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS

• • • Circumferential Weld C05.041.002 3-5163-30-11 3-51 B-30 NDE-35 PT SS 2.000 Branch SIB OFD-101A-3.2 0.154 Class B Pipe to Welding Boss Total C05.041 Iems: 1

( ( C, EOC 20 DUKE ENERGY CORPORATION CATEGORY C-F-2 Pressure Retainin Welds INSERVICE INSPECTION PLAN MANAGEMENT In Carbon Or Low Alloy Steel Piping Inservice Inspection Database Management System Plan Report Ping Welds >_ 318 In. Nominal Wall Thickness Oconee 3 Page 41 Wor *nNS 4 Inservice Inspectlon Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMI 3ERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS

• • • • Circumferential Weld C05.051.006 3MS-122-1 3MS-122 NDE-600 UT CS 6.000 This weld was listed previously as 3-O1A-14-1 on Iso Circumferential 01A OFD-122A-3.2 0.432 3-O1A-14 until it was transferred to lso 3MS-122.

Class B Pipe to Procedure PDI-UT-1 may be used.

Elbow C05.051.006A 3MS-122-1 3MS 122 NDE-25 MT CS 6.000 This weld was listed previously as 3-01A-14-1 on Iso Circumferential 01A OFD-122A-3.2 0.432 3-01A-14 until it was transferred to lso 3MS-122.

Class B Pipe to The Inspection Inoutage 5 was for additional sample Elbow and does not count Inpercentages.

C05.051.009 3MS-1B-A 3-01A-23 NDE-600 UT CS 26.000 Grinnell Subassembly 3MS-1B Circumferential 01A OFD-122A-3.1 0.875 Procedure PDI-UT-1 may be used.

Class B 3MS-1B Pipe to Elbow C05.051.009A 3MS-11B-A 301A-23 NDE-25 MT CS 26.000 Grinnell Subassembly 3MS-1 B Circumferential 01A OFD-122A-3.1 0.875 Class B 3MS-1B Pipe to Elbow C05.051.017 3FWD-83-F 3-03-27 NDE-600 UT CS 24.000 Grinnell Subassembly 3FWD-83 Circumferential 03 OFD-121B-3.3 1.218 Procedure PDI-UT-1 may be used.

Class B 3FWD-83 Pipe to Reducer C05.051.017A 3FWD-83-F 3-03-27 NDE-25 MT CS 24.000 Grinnell Subassembly 3FWD-83 Circumferential 03 OFD-121B-3.3 1.218 Class B 3FWD-83 Pipe to Reducer C05.051.019 3-03-29-WG91 -D 3-03-29 NDE-600 UT CS 14.000 Procedure PDI-UT-1 may be used.

Circumferential 03 OFD-121B-3.3 0.750 Class B OM-2201-223 Pipe to Pipe Cap C05.051.019A 3-03-29-WG91-D 3-03-29 NDE-25 MT CS 14.000 Circumferential 03 OFD-121B-3.3 0.750 Class B OM-2201-223 Pipe to Pipe Cap

EOC 20

( C DUKE ENERGY CORPORATION CATEGORY C-F-2 Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT Ino n Or Low Allo Steel P4in Inservlce Inspection Database Management System Plan Report P1310 Welds >= 318 In. NomInal Wall Thickness Oconee 3 Page 42 orPIPIna >NP S4 Inservice Inspectlon Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REO MAT/SCH DIArrHK CAL BLOCKS COMMENTS C05.051.020 3-03-30-WG91-C 3-03-30 NDE-600 UT Cs 14.000 Procedure PDl-UT-1 may be used.

Circumferential 03 OFD-121B-3.3 0.750 Class B OM-2201-223 Tee to Pipe C05.051.020A 3-03-30-WG91 -C 3-03-30 NDE-25 MT CS 14.000 Circumferential 03 OFD-121 B-3.3 0.750 Class B OM-2201-223 Tee to Pipe C05.051.026 3-03A-97-13 3-03A-97 NDE-600 UT CS 6.000 Procedure PDI-UT-1 may be used.

Circumferential 03A OFD-121D-3.1 0.562 Class B Elbow to Pipe C05.051.026A 3-03A-97-13 3-03A-97 NDE-25 MT CS 6.000 Circumferential 03A OFD-1211D-3.1 0.562 Class B Elbow to Pipe C05.051.034 3LPS-478-76 3LPS-478 NDE-600 UT CS 8.000 This weld was listed previously as 3-148-119-76 Circumferential 14B OFD-1248-3.2 0.500 until iso 3-14B-119 was redrawn.

Class B Pipe to Procedure PDI-UT-1 may be used.

Tee C05.051.034A 3LPS-478-76 3LPS-478 NDE-25 MT CS 8.000 This weld was listed previously as 3-14B-119-76 Circumferential 14B OFD-124B-3.2 0.500 until iso 3-14B-119 was redrawn.

Class B Pipe to Tee C05.051.039 3LPS-477-53 3LPS-477 NDE-600 UT CS 8.000 This weld was listed previously as 3-14B-119-53 Circumferential 148 OFD-124B-3.2 0.500 until iso 3-14B-119 was redrawn.

Class B Pipe to Procedure PDI-UT-1 may be used.

Pipe C05.051.039A 3LPS-477-53 3LPS-477 NDE-25 MT CS 8.000 This weld was listed previously as 3-14B-119-53 Circumferential 14B OFD-124B-3.2 0.500 until iso 3-148-119 was redrawn.

Class B Pipe to Pipe C05.051.044 3LPS-478-77 3LPS-478 NDE-600 UT CS 8.000 This weld was listed oreviousiv as 3-14B-119-77 Circumferential 14B OFD-124B-3.2 0.500 until iso 3-14B-119 was redrawn.

Class B Pipe to Procedure PDI-UT-1 may be used.

Tee

EOC 20 C .( (

DUKE ENERGY CORPORATiON CATEGORY C-F-2. Pressure Retalning Welds INSERVICE INSPECTION PLAN MANAGEMENT In Carbon Or Low Alloy Steel Piping Inservice Inspection Database Management System Plan Report NP1in Welds >= 31 In ominaf Wall Thickness Oconee 3 Page 43 for PoIng > NPS 4 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS C05.051.044A 3LPS-478-77 3LPS-478 NDE-25 MT CS 8.000 This weld was listed previously as 3-146-119-77 Circumferential 14B OFD-124B-3.2 0.500 until iso 3-143-119 was redrawn.

Class B Pipe to Tee C05.051.045 3LPS-478-9 3UPS-478 NDE-600 UT CS 8.000 This weld was listed previously as 3-144B-1 19-9 until Circumferential 14B OFD-1248-3.2 0.500 iso 3-14B-119 was redrawn.

Class B Elbow to Procedure PDI-UT-1 may be used.

Elbow C05.051.045A 3LPS-478-9 3LPS-478 NDE-25 MT CS 8.000 This weld was listed previously as 3-14B-119-9 until Circumferential 14B OFD-124B-3.2 0.500 iso 3-14119 was redrawn.

Class B Elbow to Elbow Total C05.051 hems: 20

C r-EOC 20 DUKE ENERGY CORPORATION CATEGORY C-F-2. Pressure Retaining Welds INSERVICE INSPECTION PLAN MANAGEMENT 3

In Carbon Or Low Alloy Steel P iping Pine Branch Connections of Branch PIRIna >=

NNPS 2 Inservice Inspection Database Management System Oconee 3 Inservlce Inspectlon Plan for Interval 3 Outage 6 Plan Report Page 44 08/1812003 ITEM NUMBER IDNUMB3ER SYS ISO/DWO NUME3ERS PROC INSP REQ MATISCH DIANTHK CAL BLOCKS COMMENTS

• • • • Circumferential Weld C05.081.006 3MS-15A-F-1 3-01A-9 NDE-25 MT CS 8.000 Grinnell Subassembly 3MS-1 5A. Inspect the Gaurd Branch 01A OFD-122A-3.1 0.906 Pipe to Reinforcing Collar weld AND the Class B 3MS-15A Pipe to Reinforcing Collar to the Main Steam Header pipe Pipe Weld. This is done because weld# 3-MS15A-F Is Inaccessable due to Gaurd Pipe. See Request for Relief ONS-01 0.

C05.081.010 3FWD-83-C 3-03-27 NDE-25 MT CS 24.000 Grinnell Subassembly 3FWD-83 Branch 03 OFD-121B-3.3 1.218 Inspect both welds on the Reinforcing coflar.

Class B 3FWD-83 Pipe to Pipe Total C05.081 Items: 2 Total C05 Items: 87

EOC 20 C

DUKE ENERGY CORPORATION CATEGORY D-B. Systems In Support Of ECC. INSERVICE INSPECTION PLAN MANAGEMENT CHR. Atmos. Cleanup. And Reactor RHR Inservice Inspection Database Management System Plan Report Oconee 3 Page 45 Inservice Inspection Plan for Interval 3 Outage 6 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME IERS PROC INSP REO MAT/SCH DIA/THK CAL BLOCKS COMMENTS Component Supports and Restraints D02.020.003 3-O1A-LC-1605 0-2403D QAL-14 VT-3 NA 6.000 File no. OSC-510 Sht Iof3 Rigid Restraint 01A OFD-122A-3.4 0.125 Prob. No. 3-01A-04 Class C Main Steam to Emergency F.W. Pump D02.020.004 3-01A-R1 4-0-2403C OAL-14 VT-3 NA 6.000 File no. OSC-510 Sht 2of3 Rigid Restraint 01A OFD-122A-3.4 0.500 Prob. No. 3-01A-04 Page 68 Class C Main Steam to Emergency F.W. Pump D02.020.015 3-03A-DE048 1-0-2400A QAL-14 VT-3 NA 6.000 File No. OSC-526 Rigid Restraint 03A OFD-121D-3.1 0.125 Page No. 42; Problem No. 3-03A-09 Class C Emergency Feedwater System D02.020.028 3-03A-H141 1-0-2437A OAL-14 VT-3 NA 6.000 File No. OS-524 Rigid Restraint 03A OFD-121D-3.1 0.125 Page No. 64; Problem No. 3-03A-07 Class C Emergency Feedwater System D02.020.031 3-03A-H152 1-0-2400B QAL-14 VT-3 NA 6.000 File No. OSC-527 Rigid Restraint 03A OFD-121D-3.1 0.500 Page No. 39; Problem No. 3-03A-10 Class C - Emergency Feedwater System D02.020.043 3-03A-SR177 1-0-24398 QAL.14 VT-3 NA 6.000 File No. OS-524 Rigid Restraint 03A OFD-1 21 D-3.1 0.375 Page No. 63; Problem No. 3-03A-07 Class C Emergency Feedwater System D02.020.047 3-03A-H10 1-0-24398 OAL-14 VT-3 NA 6.000 File No. OSC-1224^23 Rigid Restraint 03A OFD-121D-3.1 0.500 Page No. 25.3; Problem No. 3-03A-13 Class C Aux Service Water Piping D02.020.048 3-03A-H1 1 1-0-2439B QAL-14 VT-3 NA 6.000 File No. OS-519 Rigid Restraint 03A OFD-121D-3.1 0.375 Page No. 54; Problem No. 3-03A-06 Class C Emergency Feedwater System

( r- C EOC 20 DUKE ENERGY CORPORATION CATEGORY D-B. Systems In Support Of ECC. INSERVICE INSPECTION PLAN MANAGEMENT CHR, Atmos. Cleanup. And Reactor RHR Inservice Inspection Database Management System Plan Report Integral Attachment Oconee 3 Page 46 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS D02.020.049 3-03A-H1 10 1-0-2400A QAL-14 VT-3 NA 6.000 File No. OSC-526 Rigid Restraint 03A OFD-121D-3.1 0.125 Page No. 42; Problem No. 3-03A-09 Class C Emergency Feedwater System D02.020.050 3-03A-H159 1-0-2401 B QAL-14 VT-3 NA 6.000 File No. OSC-527 Rigid Restraint 03A OFD-121ID-3.1 0.500 Page No. 39; Problem No. 3-03A-10 Class C Emergency Feedwater System D02.020.061 3-03A-SR119 1-0-2400A QAL-14 VT-3 NA 6.000 File No. OSC-526 Rigid Restraint 03A OFD-121D-3.1 0.500 Page No. 41; Problem No. 3-03A-09 Class C Emergency Feedwater System D02.020.062 3-03A-SR121 1-0-2400A QAL-14 VT-3 NA 6.000 File No. OSC-526 Rigid Restraint 03A OFD-1210-3.1 0.500 Page No. 41; Problem No. 3-03A-09 Class C Emergency Feedwater System D02.020.067 3-03A-SR138 1-0-2437A QAL-14 VT-3 NA 6.000 File No. OS-524 Rigid Restraint 03A OFD-12110-3.1 1.000 Page No. 64; Problem No. 3-03A-07 Class C Emergency Feedwater System D02.020.068 3-03A-SR139 1-0-2437A OAL-14 VT-3 NA 6.000 File No. OS-524 Rigid Restraint 03A OFD-1210-3.1 0.500 Page No. 64; Problem No. 3-03A-07 Class C Emergency Feedwater System D02.020.091 3-04A-SR3 2-0-24398 QAL-14 VT-3 NA 6.000 File No. OSC-520 Rigid Restraint 04A OFD-121B-3.5 0.500 Page No. 48.1 Class C Problem No. 3-04A-01; System 04A D02.020.096 3-07A-SRI 5 4-0-2402A QAL-14 VT-3 NA 8.000 File No. OS-522 Rigid Restraint 07A OFD-121A-3.8 1.000 Page No. 60.1 Class C Problem No. 3.07-03; System 07A D02.020.103 3.13-SR2 7-0-2400A OAL-14 VT-3 NA 24.000 File noOSC-523 Pace 40 Rigid Restraint 13 OFD-133A-3.2 0.337 Prob. No. 13-7 Class C Condenser Circulating Water Emerg. Disch.

EOC 20

( (

DUKE ENERGY CORPORATION CATEGORY D-B Systems fn SuR or? Of ECC INSERVICE INSPECTION PLAN MANAGEMENT CHR. Atmos. Cleanup, And Reactor RHR Inservice Inspection Database Management System Plan Report intearal Attachment Oconee 3 Page 47 Inservlce Inspection Plan for Interval 3 Outage 6 08n18n03 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAtTHK CAL BLOCKS COMMENTS D02.020.110 3-14B-DE050 0-2439B OAL-14 VT-3 NA 8.000 File No. OSC-535 Rigid Restraint 14B OFD-124B-3.2 0.280 Page No. 62 Class C Problem No. 3-14-6; Low Pressure Service Water D02.020.112 3-14B-DE067 0-2439B OAL-14 VT-3 NA 8.000 File No. OSC-535 Rigid Restraint 146 OFD-124B-3.2 1.500o Page No. 61.1 Class C Problem No. 3-14-6; Low Pressure Service Water D02.020.113 3-14B-DE068 1-0-2439B QAL-14 VT-3 NA 14.000 File No. OSC-532 Rigid Restraint 14B OFD-124B-3.2 2.000 Page No. 78; Problem No. 3-14-04 Class C- Low Pressure Service Water Discharge from RB Coolers W02.020.114 3-14B-DE069 1-0-2439B QAL-14 VT-3 NA 10.000 File No. OSC-532 Rigid Restraint 14B OFD-124B-3.2 0.337 Page No. 78; Problem No. 3-14-04 Class C Low Pressure Service Water Discharge from R B Coolers D02.020.116 3-14B-DE071 1-0-2439B OAL-14 Vr-3 NA 10.000 File No. OSC-532 Rigid Restraint 14B OFD-124B-3.2 1.500 Page No. 78; Problem No. 3-14-04 Class C Low Pressure Service Water Discharge from R B Coolers D02.020.117 3-14B-H15 0-2438C OAL-14 VT-3 NA 16.000 Fie no. 0S-535 Rigid Restraint 14B OFD-124B-3.1 1.500 Prob. No. 3-148 Page 60 Class C LPSWater D02.020.118 3-14B-H22 1-0-2439B OAL-14 VT-3 NA 8.000 File No. OSC-535 Rigid Restraint 14B OFD-124B-3.2 0.125 Page No. 61.1 Class C Problem No. 3-14-6; Low Pressure Service Water D02.020.1 19 3-14B-H23 1-0-2439B OAL-14 \T-3 NA 8.000 Fle No. OSC-535 Rigid Restraint 14B OFD-1248-3.2 1.500 Page No.61.1 Class C Problem No. 3-14-6; Low Pressure Service Water D02.020.120 3-14B-H28 1-0-2439B OAL-14 VT-3 NA 14.000 File no. OSC-533 Rigid Restraint 14B OFD-124B-3.1 0.500 Prob. No. 3-14-05 Page 61.1 Class C LPSWater

EOC 20 C (7 (

DUKE ENERGY CORPORATION CATEGORY D-B Systems In SuRort Of ECC INSERVICE INSPECTION PLAN MANAGEMENT CHR. Atmos. Cleanup, And Reactor RHR Inservice Inspection Databas Management System Plan Report finteral Attachment Oconee 3 Pae 48 Inservice Inspection Plan for Interval 3 Outage 6 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS D02.020.121 3-14B-H101 0-2437B OAL-14 VT-3 NA 20.000 File No.OS-535 Page 60 Rigid Restraint 14B OFD-124A-3.1 1.500 Problem No.3-14-6 Class C UPSWater D02.020.122 3-14B-H1-02 0-2437B OAL-14 VT-3 NA 20.000 File No.OS-535 Page 60 Rigid Restraint 14B OFD.124A-3.1 1.500 Problem No.3-14-6 Class C LPSWater D02.020.123 3-14B-H17 0-2438A QAL-14 VT-3 NA 14.000 File no. OSC-533 Rigid Restraint 14B OFD-124B-3.1 2.000 Prob. No. 3-14-05 Page 61.1 Class C LPSWater D02.020.124 3-14B-JGM-2706 0-2437A OAL-14 VT-3 NA 16.000 File no. OSC-536 Rigid Restraint 14B OFD-124B-3.1 0.187 Prob. No. 3-14-01 Page 38 Class C LPSWater Cooler Discharge D02.020.125 3-14B-JTC-0101 0-2439B QAL-14 VT-3 NA 18.000 File No. OSC-532 Rigid Restraint 14B OFD-124B-3.2 0.187 Page No. 80; Problem No. 3-14-04 Class C Sway Strut to Low Pressure Service Water Discharge from R B Coolers D02.020.126 3-14B-ML-5005 0-2437A QAL-14 VT-3 NA 20.000 File no. OSC-1 808 Sht 2 of 2 Rigid Restraint 14B OFD-124A-3.1 2.000 Prob. No. 3-08-1 Page 36 Class C Emergency F.W. Pump Turbine Exh. to Condenser D02.020.127 3-148-Ri101 0-2437B QAL-14 VT-3 NA 20.000 File No.OS-535 Page 60 Rigid Restraint 14B OFD-124A-3.1 0.500 Problem No.3-14-6 Class C LPSWater D02.020.128 3-14B-R103 0-2439B QAL-14 VT-3 NA 8.000 File No. OSC-535 Rigid Restraint 14B OFD-124B-3.2 0.237 Page No. 61.1 Class C Problem No. 3-14-6; Low Pressure Service Water D02.020.143 3-57-H5 0-2481A QAL-14 VT-3 NA 12.000 File No.OSC-1351-06 Rigid Restraint 57 OFD-1 OOA-3.2 0.750 Problem No.3-57-01 Class C SWAY STRUT to Dwg # 0-3RB-357001-01 PZR Relief Valve System

EOC 20 C:

DUKE ENERGY CORPORATION CATEGORY D-B. Systems In SuR ort Of ECC. INSERVICE INSPECTION PLAN MANAGEMENT CHR, Atmos. CleanupAnd Reactor RHR Inservice Inspection Database Management System Plan Report WIntearal Attachment Oconee 3 Page 49 N Inservice Inspection Plan for Interval 3 Outage 6 0818=20O3 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REO MAT/SCH DIAITHK CAL BLOCKS COMMENTS D02.020.149 1-WL-100A-KO001 KFD-100A-1.1 OAL-14 VT-3 NA 8.000 Integral Attachment Inspection Rigid Restraint WL 0.500 Keowee Unit I Class C D02.020.151 2-WL-100A-K0032 KFD-100A-2.1 QAL-14 VT-3 NA 8.000 Integral Attachment Inspection Rigid Restraint WL 0.500 Keowee Unit 2 Class C Total D02.020 Items: 37

EOC 20

( C DUKE ENERGY CORPORATION CATEGORY D-B. Systems In Support Of ECC. INSERVICE INSPECTION PLAN MANAGEMENT CHR. Atmos. Cleanup. And Reactor RHR Inservice Inspection Database Management System Plan Report

=ITEgal AttachRNent Oconee 3 Page 50 Inservice Inspection Plan for Interval 3 Outage 6 0811n8n3 ITEM NUMBER ID NUMBER SYS ISO/DWG NUI VIBERS PROC INSP REO MAT/SCH DIAITHK CAL BLOCKS COMMENTS Mechanical and Hydraulic Snubbers . _ _ _

D02.030.002 3-03-SR3 0.22401A QAL.14 VT-3 NA 24.000 File no. 0SC-512 Pageo36.1 Hyd Snubber 03 OFD-121B-3.3 0.406 Prob. No. 3-03-01 Class C Main Feedwater System. Inspect with Item No.

F01 .050.001 Total D02.030 Items: I

r . (

EOC 20 DUKE ENERGY CORPORATION CATEGORY D-B. Systems In Suvoort Of ECC. INSERVICE INSPECTION PLAN MANAGEMENT CHR. Atmos. Cleanun. And Reactor RHR Inservice Inspection Database Management System Plan Report intearal Attachment Oconee 3 Page 51 Inservice Inspection Plan for Interval 3 Outage 6 08/182003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS Spring Type Supports D02.040.001 3-O1A-H7 4-0-2400A QAL-14 VT-3 NA 6.000 File no. OSC-510 Sht 2 of 3 Spring Hgr 01A OFD-122A-3.4 0.125 Prob. No. 3-01A-04 Page 68 Class C Main Steam to Emergency F.W. Pump D02.040.002 3-01A-H8 4-0-2400A QAL-14 VT-3 NA 6.000 File no. 0SC-51 0 Sht 2 of 3 Rigid Support 01A OFD-122A-3.4 0.216 Prob. No. 3-OIA-04 Page 68 Class C Main Steam to Emergency F.W. Pump D02.040.003 3-03-H48 0-2401A QAL.14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Spring Hgr 03 OFD-121B-3.3 0.322 Prob. No. 3-03-01 Class C Main Feedwater System D02.040.004 3-03-H49 0-2401A OAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Spring Hgr 03 OFD-121B.3.3 1.500 Prob. No. 3-03-01 Class C Main Feedwater System D02.040.005 3-03-1-50 0-2401A OAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel 36.1 Spring Hgr 03 OFD-121B-3.3 0.625 Prob. No. 3-03-0 1 Class C Main Feedwater System D02.040.006 3-03-H58 0-2401A OAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Spring Hgr 03 OFD-121B-3.3 0.322 Prob. No. 3-03-01 Class C Main Feedwater System D02.040.007 3-03-H59 0-2401A OAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Spring Hgr 03 OFD-121B-3.3 1.500 Prob. No. 3-03-01 Class C Main Feedwater System D02.040.019 3-07A-H15 0-2401A QAL-14 VT-3 NA 8.000 File No. OS-522 Spring Hgr 07A OFD-121A-3.8 1.000 Page No. 60.1 Class C Problem No. 3-07-03; System 07A

EOC 20

( C C DUKE ENERGY CORPORATION CATEGORY D-B, 5stems In Support Of ECC.- INSERVICE INSPECTION PLAN MANAGEMENT CHR. Atmos. Cleanup.-And Reactor RHR Inservice Inspection Database Management System Plan Report W!n=grAfltchmet Oconee 3 Page 52 ftftAd P*"

w Inservice Inspection Plan for Interval 3 Outage 6 uVo IOIrUU.)

ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS D02.040.024 3-08-Hl 1-0-2400A OAL-14 VT-3 NA 10.000 File no. OSC-1 808 Sht 2 ol 2 Spring Hgr 08 OFD-122A-3.4 0.237 Prob. No. 3-08-1 Page 36 Class C Emergency F.W. Pump Turbine Exh. to Condenser D02.040.041 3-14B-H9 0-2436D OAL-14 VT-3 NA 16.000 File no. OSC-531 Spring Hgr 14B OFD-124B-3.1 0.187 Prob. No. 3-146-3 Page 32 Class C UPSWater Cooler Discharge Total D02.040 Items: 10 Total D02 Items: 48

C (

EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A. Supports (Categoly A) INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• ciass 1 ech. Conn. to Press, Retanina Como. & Oconee 3 Page 53 BId. Structure Inservice Inspection Plan for Interval 3 Outage 6 08/18I2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS FO1.010.001 3-51A-H12B 0-2479A OAL-14 Vt-3 NA 2.500 File No. OSC-1342-06 Rigid Restraint 51A OFD-1OIA-3.4 0.375 Vol.A Class A 0-2492B-3(S) Prob. No. 3-51-20 H.P.I. West Coolant Loop South Leg F01.010.002 3-51A-H2B 0-2479A QAL-14 VT-3 NA 2.500 File No. OSC-1342-06 Rigid Restraint 51A OFD-101A-3.4 0.375 Vol.A Class A 0-2492B-3(S) Prob. No. 3-51-20 H.P.l. West Coolant Loop South Leg FO1.010.005 3-59-H28 0-2478A OAL-14 VT-3 NA 1.500 File NO. OSC-1660-01 Rigid Restraint 59 OFI-100A-3.1 0.250 Page No. 60.1 Class A Problem No. 3-51.14; R C Pump to HPI Letdown Coolers.

Total F01.010 Items: 3 F01.011.001 3-51A-H1OA 0-2479A QAL-14 VT-3 NA 2.500 File No. OSC-1343 Rigid Restraint 51A OFD-11A-3.4 0.000 Vol.B of C Class A Prob. No. 3-53-10 Page 59 H.P.I. East Coolant Loop F01.011.002 3-51A-H12A 0-2479A QAL.14 VT-3 NA 2.500 File No. OSC-1 343 Rigid Restraint 51A OFD-101A-3.4 0.000 Vol.8 of C Class A Prob. No. 3-53-10 Page 58 H.P.I. East Coolant Loop F01.011.008 3-59, H6514 0-2478D QAL-14 V1-3 NA 1.500 File No. OSC-1349-06 Rigid Restraint 59 OFD-100A-3.1 0.000 Problem No. 3-59-05, sht. 1 of 1 Class A Reactor BId Component Drains Total F01.011 Items: 3 F01.012.011 3-50-RCPM-3B1-SS1 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-1011-0140003. Reactor Mech Snubber 50 OFD-1 OOA-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575. Inspect with FO1.050.113.

Total F01.012 Items: 1

(j (

EOC 20 DUKE ENERGY CORPORATION CAEORY F-ASuppors(CateoryA) INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report EClass 2 Weld Connections to Building Structure Oconee 3 Page 54 08/18/2003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER IDNUMBER SYS ISO/DWG3NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS F01.020.001 3-01A-H4A 0-2481A OAL-14 VT-3 NA 26.000 File no. OSC.1334 Rigid Restraint 01A OFD-122A-3.1 0.750 Prob. No. 3-01-08 Class B 0-2490A-3(S) Main Steam System Inspect at the same time iem number C03.020.004 Is inspected.

F01.020.002 3-01A-1H5A 0-2481A QAL-14 VT-3 CS 26.000 File no. OSCG1 334 Rigid Restraint 01A OFD-122A-3.1 0.750 Prob. No. 3-01-08 Class B 0-2490A-3(S) Main Steam System Inspect at the same time Item number C03.020.006 Is inspected.

F01.020.020 3-53B-DE026 0-2435B OAL-14 VT-3 NA 10.000 File No. 08550 Rigid Restraint 53B OFD-102A-3.2 0.000 Page No.56 Class B Sway Strut to Problem No. 3-53-03; System 53B F01.020.021 3-53B-DE027 0-24358 QAL-14 VT-3 NA 10.000 File No. OS-550 Rigid Restraint 53B OFD-102A-3.2 0.000 Page No. 56 Class B Sway Strut to Problem No. 3-53-03; System 53B F01.020.022 3-53B-DE028 0-2435B OAL-14 VT-3 NA 10.000 File No. OS-550 Rigid Restraint 53B OFD-102A-3.2 0.000 Page No. 56 Class B Sway Strut to Problem No. 3-53-03; System 53B F01.020.029 3-54A-DE003 3-0-2435B OAL-14 VT-3 NA 8.000 File No. OSC-554 Rigid Restraint 64A OFD-103A-3.1 0.000 Page No.47.1 Class B Sway Strut to Problem No. 3-54-01; Reactor Bid Spray F01.020.030 3-54A-H25 3-0-2439A QAL-14 VT-3 NA 8.000 File No. OSC-556 Rigid Restraint 54A OFD-103A-3.1 1.000 Page No. 64.1 Class B Problem No. 3-54-03 F01.020.035 3-54A-SR19 3-0-2439B QAL-14 VT-3 NA 8.000 File No. OSC-556 Rigid Restraint 54A OFD-103A-3.1 0.000 Page No. 65.1 Class B Problem No. 3-54-03

EOC 20

( C DUKE ENERGY CORPORATION CATEGORY F-A, Supports (Categgly A) INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report 2 Weld gonneotlons to Building Structure Oconee 3 CClass Page 55 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.020.048 3-51 B-H24 2-0-2437A OAL-14 VT-3 NA 4.000 File No. OSC-543 Page 58.3 Rigid Restraint 51B OFD-101A-3.1 0.000 Prob. No. 3-514 sht.2 of 2 Class B F01.020.051 3-51 B-H63 1-0-2436G OAL-14 VT-3 NA 6.000 File No. OSC-539 Page 145 Rigid Restraint 51B OFD-101A-3.2 0.280 Prob. No. 3-51-2 sht.3 of 5 Class B Total F01.020 Items: 10 F01.021.005 3-14B-H20D 0-2479A OAL-14 VT-3 NA 8.000 File No. OSC-1344-06 Rigid Restraint 14B OFD-124B-3.2 1.500 Page No. 6(1) 38 Class B Problem No. 3-146-09 System 14B F01.021.006 3-14B-H22A 0-2480A OAL-14 VT-3 NA 8.000 File No. OSC-1344-06 Rigid Restraint 14B OFD-124B-3.2 1.500 Page No. 6(2) 38 Class B Problem No. 3-144B-08 System 14B F01.021.007 3-14B-H22D 0-2480A OAL-14 VT-3 NA 8.000 File No. OSC-1344-06 Rigid Restraint 14B OFD-124B-3.2 1.500 Page No.6(1)38 Class B Problem No. 3-14B-09 System 14B F01.021.011 3-51A-DE006 0-2435D QAL-14 VT-3 NA 2.500 File No. OSC-538 Rigid Restraint 51A OFD-101A-3.2 0.000 Prob. No. 3-51-1 Page 108 Class B Disch.to Letdown Storage Tanks from R.C. Seal Return Coolers F01.021.012 3-51A-DE083 0-2439A OAL-14 VT-3 NA 4.000 File No. OSC-541 Rigid Restraint 51A OFD-101A-3.4 0.000 Prob. No. 3-51-4 Page 63 Class B H.P.l.to Reactor Coolant Loop 'A" F01.021.013 3-51 A-DE084 0-2439D OAL-14 VT-3 NA 2.500 File No. OSC-538 Rigid Restraint 51A OFD-101A-3.1 0.000 Prob. No. 3-51-1 Sht.8 of 9 Class B R.C. Seal Return Cooler and Purification Demin.

EOC 20

( (.r

(

DUKE ENERGY CORPORATION CATEGORY F-A. Supports (Category 6) INSERVICE INSPECTION PLAN MANAGEMENT InservIce Inspection Database Management System EClass 2 Weld Connections to Buildina Structure Oconee 3 Inservice Inspection Plan for Interval 3 Outage 6 Plan Report Page 56 08n18n03 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.021.014 3-51A-DE085 2-0-2439C QAL-14 VT-3 NA 4.000 File No. OSC4542 Rigid Restraint 51A 0FD-101A-3.4 0.000 Prob. No. 3-51-05 Pa"e2 Class B HPI Pump Disch.

F01.021.024 3-53B-R2 5-0-2438D QAL-14 VT-3 NA 10.000 File No. 0S-552 Rigid Restraint 53B OFD-102A..3.2 1.000 Page 43.3 Class B Problem No. 3-53-06 System 53B F01.021.030 3-56-DE052 0-2438D OAL.14 VT-3 NA 8.000 File No. OSC-563 Rigid Restraint 56 OFD-104A-3.1 0.000 Page No. 94.6 Class B Problem No. 3-5602 Spent Fuel Cooling F01.021.035 3-51 B-SB-1 002 0-2436G QAL-14 VT-3 NA 2.500 File No. OSC-538 Page 105 Rigid Restraint 51B OFD-101A-3.2 0.000 Prob. No. 51-1 sht.1of 9 Class B Total F01.021 Items: 10 F01.022.009 3-53B-DE013 0-2435B QAL-14 VT-3 NA 14.000 File NO. OS-549 Mech Snubber 536 OFD-102A-3.1 0.000 Page 78 Class B, Problem No. 3-53-01 L P Injection & Decay Heat Removal. Inspect with Item No. FO1.050.071 F01.022.011 3-53B-H43 5-0-2436D QAL-14 VT-3 NA 10.000 File No. OS-550 Spring Hgr 536 OFD-102A-3.2 0.000 Page No.58 Class B Problem No. 3-53-03 System 53B F01.022.014 3-53B-SR46 2-0-2435D OAL-14 VT-3 NA 6.000 File No. OSC-539 Mech Snubber 53B OFD-101A-3.3 0.000 Prob. No. 3-51-2 Page 145 Class B H.P.I. Pumps 3A,3B,&3C Suction Header. Inspect with Item No. FO1.050.090 F01.022.015 3-54A-H35 3-0-2435B QAL-14 VT-3 NA 8.000 File No. OSC-554 Spring Hgr 54A OFD-103A-3.1 1.000 Page No. 47.1 Class B Problem No. 3-54-01 Reactor BId Spray

EOC 20

( I C-DUKE ENERGY CORPORATION CATG~ORY F-ASupotsCateryC) INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report E Cass 2 Weld Connections to-Buildt1na Structure Oconee 3 Page 57 08118/2003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISOJDWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.022.016 3-54A-H39 3-0-2437B QAL-14 VT-3 NA 8.000 File No. OSC-554 Spring Hgr 54A OFD-103A-3.1 1.000 Page No. 47.1 Class B Problem No. 3-54-01 Reactor Bid Spray F01.022.020 3-01A-H1 0-2441 OAL-14 VT-3 NA 36.000 Struc. # OSC-1000 Prob. # OS 506/3/01A Data Constant Support 01A OFD-122A-3.1 0.000 Point 70 Class B FOt.022.025 3-51 B-H5535 2444 OAL-14 VT-3 NA 2.000 File No. OSC-543 Page 58.3 Spring Hgr 51B OFD-101A-3.1 0.000 Prob. No. 3-51-6 sht.2 of 2 Class B Total F01.022 Items: 7

EOC 20 C (

DUKE ENERGY CORPORATION CATEGORY F-A. Supports (Cate-orv A) INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Class 3 WeldlMech Conns at Inter-JoInts In Oconee 3 Page 58 08/1812003 Multlconn Int & NonInt Suop Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMEIERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS F01.030.006 3-03A-DE048 1-0-2400A OAL-14 VT-3 NA 6.000 File No. OSC-526 Rigid Restraint 03A OFD-121D-3.1 0.125 Page No. 42 Class C Problem No. 3-03A-09 Emergency Feedwater System F01.030.039 3-57-H5 0-2481A OAL- 14 VT-3 NA 12.000 File No.OSC-1351-06 Rigid Restraint 57 OFD-10OA-3.2 0.750 Problem No.3-57-01 Class C SWAY STRUT to Dwg # 0-3RB-357001.01 PZR Relief Valve System Inspect at the same time Item number D02.020.143 Is inspected.

Total F01.030 Items: 2 F01.031.002 3-03A-H1 1 1-0-2439B OAL-14 VT-3 NA 6.000 File No. OS-519 Rigid RestraInt 03A OFD-1 21 D-3.1 0.375 Page No. 54 Class C Problem No. 3-03A-06 Emergency Feedwater System F01.031.003 3-03A-H1-10 1-0-2400A OAL-14 VT-3 NA 6.000 File No. OSC-526 Rigid Restraint 03A OFD-121D-3.1 0.125 Page No.42 Class C Problem No. 3-03A-09 Emergency Feedwater System F01.031.011 3-04A-SR3 2-0-2439B OAL-14 VT-3 NA 6.000 File No. OSC-520 Rigid Restraint 04A OFD-121B-3.5 0.500 Page No. 48.1 Class C Problem No. 3-04A-01 System 04A F01.031.015 3-13-SR2 7-0-2400A OAL- 14 VT-3 NA 24.000 File No. OSC-523 Page 40 Rigid Restraint 13 OFD-133A-3.2 0.337 Prob. No. 13-7 Class C Condenser Circulating Water Emerg. Dlsch.

F01.031;025 2-WL-IOOA-K0032 KFD-100A-2.1 OAL-14 VT-3 NA 8.000 Calh.# KC-011 1 ,Page 30 Rigid Restraint WL 0.500 Problem # 0-WL-01 sht. 1 of 1 Class C Keowee Unit 2 Inspect at the same time Hem number D02.021.151 Is Inspected.

Total F01.031 Items: 5

EOC 20 C C DUKE ENERGY CORPORATION CGr INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Class 3 Weld/Mlech Conns at Inter Joints In Oconee 3 Page 59

_Multcon-n & No~tSo Inservlce Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIArTHK CAL BLOCKS COMMENTS F01.032.001 3-01 A-H7 4-0-2400A OAL-14 VT-3 NA 6.000 File no. OSC-51 0 Sht 2 of 3 Spring Hgr 01A OFD-122A-3.4 0.125 Prob. No. 3-01A-04 Page 68 Class C Main Steam to Emergency F.W. Pump F01.032.002 3-01A-H6 4-0-2403C QAL-14 VT-3 NA 6.000 File no. 0SC-510 Sht 2of3 Spring Hgr 01A OFD-122A-3.4 0.000 Prob. No. 3-O1A-04 Page 68 Class C Main Steam to Emergency F.W. Pump F01.032.003 3-03-H48 0-2401A QAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel 36.1 Spring Hgr 03 OFD-121B-3.3 0.322 Prob. No. 3-03-01 Class C Main Feedwater System F01.032.004 3-03-H49 0-2401A OAL-14 Vr-3 NA 24.000 File No. OSC-512 Pagel 36.1 Spring Hgr 03 OFD-121B-3.3 1.500 Prob. No. 3-03-01 Class C Main Feedwater System F01.032.009 3-03A-SR101PO 1-0-2401A QAL-14 VT-3 NA 6.000 File no. OSC-513 Page72 Hyd Snubber 03A OFD-121B-3.3 0.000 Prob. No. 3-03A-02 Class C EmergencyFeedwater System. Inspect with Item No. F01.050.035 F01.032.011 3-07A-H15 0-2401A QAL-14 VT-3 NA 8.000 File No. OS-522 Spring Hgr 07A OFD-121A-3.8 1.000 Page No. 60.1 Class C Problem No. 3-07-03 System 07A F01.032.013 3-08-Hi 1-0-2400A OAL-14 VT-3 NA 10.000 File no. OSC-1 808 Sht 2 of 2 Spring Hgr 08 OFD-122A-3.4 0.237 Prob. No. 3-08-1 Page 36 Class C Emergency F.W. Pump Turbine Exh. to Condenser Total F01.032 Items: 7

r r- C EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A. Suavorts INSERViCE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System I Clearances of Guldes & Stops. Allan of Supps.

Asembly of Sup, Items Oconee 3 Inservlce Inspectlon Plan for Interval 3 Outage 6 Plan Report Page 60 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUME3ERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS F01.040.001 3-RPV-WR36 OM 2201-51 QAL-14 VT-3 NA 0.000 Reactor Vessel Support Skirt. Class A ISI-OCN3-001 0.000 Class A FO1.040.015 3-SF-PU-A OM 2201-21 QAL-14 VT-3 NA 0.000 Spent Fuel Pump *A'Support Legs &Pad.Class C OM 2201-597 0.000 Class C OFD 104A-3.1 F01.040.016 3-SF-COOLER-A OM 201 -84 QAL-14 VT-3 NA 0.000 Spent Fuel Cooler WA.Support Legs .Class C 0.000 Class C OFD 104A-3.1 F01.040.026 3-RC-SR-FILTER OM 201-2135-001 QAL-14 VT-3 NA 0.000 3RC Seal Return Filter Support.Class B OFD-101A-3.1 0.000 Class B FO1.040.033 3-CON-BOR-TANK OM-2201-13 OAL-14 VT-3 NA 0.000 Concentrated Boric Acid Storage Tank Support.

OFD-106A-3.2 0.000 Class C Class C F01.040.034 3-PEN-ROOM-FLTR OM-272-10 QAL-14 VT-3 NA 0.000 Penetration Room Filter Train 3A Support OFD-1 16i3-3.1 0.000 Class C Class C F01.040.035 3-PEN-ROOM-FAN 0-2485C QAL-14 VT-3 NA 0.000 Penetration Room Fan 3A Support OFD-1 16B-3.1 0.000 Class C Class C F01.040.037 3-ESVP-3A OAL-14 VT-3 SS 0.000 Essential Siphon Vacuum Pump 3A Support OFD-130A-3.1 0.000 Class C Class C Total FOt.040 Items: 8

EOC 20 C C DUKE ENERG) CORPORATION CATEGORY F-A. SuDPorts INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report ESprina supoorts & Constant Load Supports Oconee 3 Page 61 08/18/2003 Inservice Inspection Plan for Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIANTHK CAL BLOCKS COMMENTS F01.050.001 3-03-SR3 0-2401A QAL-14 VT-3 NA 24.000 File no. OSC-512 Page136.1 Hyd Snubber 03 OFD-121B-3.3 0.406 Prob. No. 3-03-01 Class C Main Feedwater System.

F01.050.002 3-NPS-03-H28 0-2478 OAL.14 VT-3 NA 3.000 File No.= OSC-1224-18, Page No. 39.2; Problem Hyd Snubber 03A OFD-1 21 D-3.1 0.000 No. 3-03A-1 4; Aux Service Water Piping Class C F01.0S0.003 3-53-H3 53-0-2478A OAL-14 VT-3 NA 12.000 File No. OSC-1339 Hyd Snubber 53A OFD-102A-3.1 0.280 Page 82 Class A Problem No. 3-56-03; Spent Fuel Cooling.

F01.050.004 3-66-HlO 0-2478A OAL-14 VT-3 NA 8.000 File No. OSC-1339 Hyd Snubber 56 OFD-104A-3.1 0.000 Page No. 81 Class B Problem No. 3-56-03 Spent Fuel Cooling.

F01.050.005 3-50-H1 2 0-2479A QAL.14 VT-3 NA 2.500 File No. OSC-1343-06 Vol.A of C Hyd Snubber 50 OFD-100A-3.2 0.000 Prob.No. 3-53-09 Page 138 Class A Low Pressure InJ. Supply to PZR Spray F01.050.006 3-50-HlA 0-2479A OAL-14 VT-3 NA 10.000 Dwg. No.0-2491B-2A Hyd Snubber 50 OFD-100A-3.2 0.000 PZR Surge Une.

Class A F01.050.007 3-50-H2A 0-2479A QAL-14 VT-3 NA 10.000 Dwg. No.0-2491 B-2A Hyd Snubber 50 OFD-100A-3.2 0.000 PZR Surge Une Class A F01.050.008 3-50-H3A 0-2479A QAL-14 VT-3 NA 10.000 Dwg. No.0-2491B-2A Hyd Snubber 50 OFD-100A-3.2 0.000 PZR Surge Une Class A

C I f EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report S2rIna Supports & Constant Load-Supports Oconee 3 Page 62 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.050.009 3-51A-H2A 0-2479A QAL-14 VT-3 NA 2.500 File No. OSC-1343 Hyd Snubber 51A OFD-10t1A3.4 0.154 Vol.B of C Class A Prob. No. 3-53-10 Page 59 H.P.I. East Coolant Loop.

F01.050.010 3-03-H6B 0-2480A OAL-14 VT-3 NA 20.000 File no. OSC-1 335 Page 6(2)-71 Hyd Snubber 03 OFD-i12116-3.3 0.000 Prob. No. 3-03-06 Class B Main Feedwater System F01.050.011 3-03-H7A 0-2480A OAL.14 VT-3 NA 24.000 File no. OSC-1 335 Page 6(1)-72 Hyd Snubber 03 OFD-121B-3.3 0.237 Prob. No. 3-03-07 Class B Main Feedwater System F01.050.012 3-50-H1O 0-2480A QAL-14 VT-3 NA 2.500 File No. OSC-1343-08 VdA of C Hyd Snubber 50 OFD-1W0A-3.2 0.000 Prob.No. 3-53-09 Page 138 Class A Low Pressure Ini. Supply to PZR Spray F01.050.013 3-50-Hi 1 0-2480A QAL-14 VT-3 NA 2.500 File No. OSC 1343-06 VoIA of C Hyd Snubber 50 OFD-100A-3.2 0.000 Prob.No. 3-53-09 Pop 138 Class A Low Pressure InJ. Supply to PZR Spray F01.050.014 3-50-H8 0-2480A QAL-14 VT-3 NA 2.500 File No. OSC-1343-06 Vol.A of C Hyd Snubber 50 OFD-100A-3.2 0.000 Prob.No. 3-53-09 Page 138 Class A Low Pressure InJ. Supply to PZR Spray F01.050.015 3-501H9 0-2480A QAL-14 VT-3 NA 2.500 File No. OSC-1 343-06 Vol.A of C Hyd Snubber 50 OFD-100A-3.2 0.000 Prob.No. 3-53-09 Page 138 Class A Low Pressure InJ. Supply to PZR Spray F01.050.016 3-50-Hi 0-2481A QAL-14 VT-3 NA 2.500 File No. OSC-1343-06 Vol.A of C Hyd Snubber 50 OFD-100A-3.2 0.000 Prob.No. 3-53-09 Page 138 Class A Low Pressure InJ. Supply to PZR Spray F01.050.017 3-50-H3 0-2481A QAL-14 VT-3 NA 2.500 File No. OSC-1343-06 Vol.A of C Hyd Snubber 50 OFD-10OOA-3.2 0.154 Prob.No. 3-53-09 Page 138 Class A Low Pressure Inj. Supply to PZR Spray

C EOC 20 I DUKE ENERGY CORPORATION CATEGORY F-A. Suvoorts INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System ESorina Supports & Constant Load Supoorts Oconee 3 Inservice Inspection Plan tor Interval 3 Outage 6 Plan Report Page B3 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.050.019 3-57-H15 0-2481A QAL-14 VT-3 NA 6.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 1.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001-01 PZR Relief Valve System.

F01.050.020 3-57-H1i6 0-2481A QAL-14 VT-3 NA 6.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR Relief Valve System F01.050.021 3-57-H17 0-2481A QAL-14 VT-3 NA 6.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR Relief Valve System F01.050.022 3-57-H20 0-2481A QAL-14 VT-3 NA 6.000 Fie No.OSC-1351-6 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001-01 PZR Relief Valve System F01.050.023 3-57-H21 0-2481A OAL-14 VT-3 NA 6.000 Re No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR Relief Valve System F01.050.024 3-57-H23 0-2481A QAL-14 VT-3 NA 6.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR Relief Valve System F01.050.025 3-571-25 0-2481A QAL-14 VT-3 NA 6.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR RelIef Valve System F01.050.026 3-57-H7 0-2481A QAL-14 VT-3 NA 8.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR Relief Valve System F01.050.027 3-57-H9 0-2481A OAL-14 VT-3 NA 8.000 File No.OSC-1351-06 Hyd Snubber 57 OFD-100A-3.2 0.216 Problem No.3-57-01 Class C Dwg # 0-3RB-357001 -01 PZR Relief Valve System

EOC 20 C I.

C DUKE ENERGYCORPORATION CATEORY FA Spprs INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Minrhinn I-unnrnrtftJA nn~tnnt Lnrnd I-qjnnrntft Oconee 3 Page 64 UF Inservice Inspection Plan for Interval 3 Outage 6 08fl8i003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIATrHK CAL BLOCKS COMMENTS F01.050.028 3-01A-H2A 0-2481B QAL-14 VT-3 NA 26.000 Fite no. OSC-1334 Hyd Snubber 01A OFD-122A-3.1 0.322 Prob. No. 3-01-08 Class B 0-2490A-3(S) Main Steam System F01.050.029 3-01A-H2B 0-24819 QAL-14 VT-3 NA 26.000 File no.08SC-1334 Hyd Snubber 01A OFD-122A-3.1 0.322 Prob. No. 3-01-07 Class B 0-2490A-2(S) Main Steam System F01.050.030 3-01A-H8A 0-2481 B QAL-14 VT-3 NA 26.000 File no. OSC-1334 Hyd Snubber 01A OFD-122A-3.1 0.322 Prob. No. 3-01-08 Class B 0-2490A-3(S) Main Steam System F01.050.031 3-Q1A-H8B 0-24816 OAL-14 VT-3 NA 26.000 File no. 0SC-1334 Hyd Snubber 01A OFD-122A-3.1 0.322 Prob. No. 3-01-07 Class B 0-2490A-2(S) Main Steam System f01.050.032 3-03A-SR103PO 1-0-2400A OAL-14 VT-3 NA 6.000 File No.= OSC-526, Page No. 41; Problem No.=

Hyd Snubber 03A OFD-121D-3.1 0.000 3-03A.09; Emergeocy Feedwater System Class C f01.050.033 3-03A-SR104PO 1-0-2400A OAL-14 VT-3 NA 6.000 File No.= OSC-526, Page No.41; Problem No.=

Hyd Snubber 03A OFD-121D-3.1 0.000 3-03A-09; Emergency Feedwater System Class C F01.050.034 3-03A-SR100PO 1-0-2401A QAL-14 VT-3 NA 6.000 File No. OS-S19 Hyd Snubber 03A OFD-121D-3.1 0.203 Page No. 55 Class C Problem No. 3-03A-06 Emergency Feedwater System F01.050.035 3-03A-SR101P0 1-0-2401A QAL-14 VT-3 NA 6.000 File no. 0SC-513 Page72 Hyd Snubber 03A OFD-121B-3.3 0.000 Prob. No. 3-03A-02 Class C EmergencyFeedwater System F01.050.036 3-03A-SR102PO 1-0-2401A QAL-14 VT-3 NA 6.000 File no. OSC-513 Page7l Hyd Snubber 03A OFD-121B-3.3 0.000 Prob. No. 3-03A-02 Class C EmergencyFeedwater System

EOC 20

(

DUKE ENERGYCORPORATION CATEGORY F-ASuppors INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Sprlnc SuRoorts -&ConstantLoad Suioorts Oconee 3 Page 65 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DINATHK CAL BLOCKS COMMENTS F01.050.037 3-56-SR107 1-0-2437A QAL-14 VT-3 NA 8.000 File No.= OSC-563, Page No. 92.2; Problem No.=

Hyd Snubber 56 OFD-104A-3.1 0.000 3-56-02: Spent Fuel Cooling Class C F01.050.038 3-56-SR109 1-0-2437A QAL-14 VT-3 NA 8.000 File No.= OSC-563, Page No. 92.2; Problem No.=

Hyd Snubber 56 OFD-104A-3.1 0.000 3-56-02; Spent Fuel Cooling Class C F01.050.039 3-56-SR1 12 1-0-2437A OAL-14 VT-3 NA 8.000 File No.= OSC-563, Page No. 92.2; Problem No.=

Hyd Snubber 56 OFD-104A-3.1 0.000 3-56-02; Spent Fuel Cooling Class C F01.050.040 3-56-SRi 16 1-0-2437A OAL-14 VT-3 NA 8.000 File No OSC-563 Hyd Snubber 56 OFD-104A-3.1 0.237 Page No. 93.2 Class C Problem No. 3-56-02 Spent Fuel Cooling F01.050.041 3-56-SR1 19 1-0-2437A OAL-14 VT-3 NA 6.000 File No. OSC-563, Page No. 93.2; Problem No.=

Hyd Snubber 56 OFD-104A-3.i 0.000 3-56-02; Spent Fuel Cooling Class C F01.050.042 3-51A-SR14 1-0-2444 OAL-14 VT-3 NA 4.000 File No. OSC-542 Hyd Snubber 51A OFD-101A-3.3 0.000 Prob. No. 3-51-05 Page 42 Class B H.P.I. Pump Discharge F01.050.045 3-OA-R9 1-1-0-2401 B OAL-14 VT-3 NA 12.000 File no. 0S-507 Sht 1of2 Hyd Snubber 01A OFD-122A-3.2 0.000 Prob. No. 3-01-09 Class B Main Steam ByPass to Condenser F01.050.046 3-53B-SR22 2-0-2435B OAL-14 VT-3 NA 14.000 File NO.= OS-549, Page 78; Problem No.= 3-53-01; Hyd Snubber 53B OFD-102A-3.1 0.000 L P Injection & Decay Heat Removal Class B F01.050.047 3-54A-SR22 3-0-2435B QAL-14 VT-3 NA 8.000 Fie No.= OSC-554. Page No. 47.1: Problem No.=

Hyd Snubber 54A OFD-1 03A-3.1 0.000 3-54-01; Reactor Bid Spray Class B

EOC 20 C C (C DUKE ENERGY CORPORATION CATEORYE-A, Suports INSERVICE INSPECTION PLAN MANAGEMENT InservIce Inspection Database Management System Plan Report

• Sprina Supports & Constant Load Supports Oconee 3 Page 66 Inservlce Inspection Plan for Interval 3 Outage 6 081M812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIArTHK CAL BLOCKS COMMENTS F01.050.048 3-54A-SR7 3-0-2435B QAL-14 VT-3 NA 8.000 File No. OSC-555 Hyd Snubber 54A OFD-103A-3.1 1.000 Page No.42.1 Class B Problem No. 3-54-02 F01.050.049 3-54A-SR14 3-0-2439A QAL-14 VT-3 NA 8.000 File No.= OSC-556, Page No. 64.1; Problem Hyd Snubber 54A OFD-103A-3.1 0.000 No.=3-54-03 Class B F01.050.050 3-01A-R4 3-803E245-2 QAL-14 VT-3 NA 12.000 File no. OSC-51 1 Page50 Hyd Snubber 01A OFD-122A-3.1 0.000 Prob. No. 3-01-06 Class B Main Steam System F01.050.051 3-01A-R8 4-0-2403D QAL-14 VT-3 NA 6.000 File no. OSC-510 Sht Iof3 Hyd Snubber 01A OFD-122A-3.4 0.000 Prob. No. 3-01A-04 Class C Main Steam to Emergency F.W. Pump F01.050.053 3-01A-R11 4-2-0-2403D OAL-14 VT-3 NA 6.000 File no. OSC-510 Sht 2of3 Hyd Snubber 01A OFD-122A-3.4 0.000 Prob. No. 3-O1A.04 Page 88 Class C Main Steam to Emergency F.W. Pump-F01.050.054 3-01A-R4 4-2-0-2403D OAL-14 VT-3 NA 6.000 File no. OSC-510 Sht 2of3 Hyd Snubber 01A OFD-122A-3.4 0.000 Prob. No. 3-O1A-04 Page 68 Class C Main Steam to Emergency F.W. Pump F01.050.055 3-53B-SR32 5-0-2435B QAL-14 VT-3 NA 10.000 File No.= OS-550, Page No. 57: Problem No.=

Hyd Snubber 53B OFD-102A-3.2 0.000 3-53-03; System 53B Class B F01.050.056 3-53B-SR33 5-0-2435B QAL-14 VT-3 NA 10.000 File No.= OS-550, Page No. 57; Problem No.=

Hyd Snubber 53B OFD-102A-3.2 0.000 3-53-03; System 53B Class B F01.050.057 3-53B-SR38 5-0-2435B QAL-14 VT-3 NA 10.000 File No. OS-550 Hyd Snubber 53B OFD-102A-3.2 0.000 Page No. 56 Class B Problem No. 3-53-03; System 53B

(.

EOC 20 i DUKE ENERGY CORPORATION CATG~ORY F-A, upors INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Rrlxng.SuRports & Constant Load SuRorts Oconee 3 Page 67 Inservice Inspection Plan for Interval 3 Outage 6 0811812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIATHK CAL BLOCKS COMMENTS P01.050.058 3-53B-SR39 5-0-2435B QAL-14 VT-3 NA 10.000 File No.= S0550, Page No. 58; Problem No.=

Hyd Snubber 53B OFD-102A-3.2 0.000 3-53-03; System 53B Class B F01.050.059 3-13-SRI 7-0-2400A QAL-14 VT-3 NA 12.000 File no. OSC-523 Page 40 Hyd Snubber 13 OFD-133A-3.2 0.000 Prob. No. 13-7 Class C Condenser Circulating Water Emerg. Disch.

F01.050.060 3-13-SR3 7-0-2400A QAL-14 VT-3 NA 24.000 File noOSC-523 Page 40 Hyd Snubber 13 OFD-133A-3.2 0.000 Prob. No. 13-7 class C Condenser Circulating Water Emerg. Disch.

F01.050.061 3-13-SR4 7-0-2400B OAL-14 VT-3 NA 30.000 File noOSC-523 Page 40 Hyd Snubber 13 OFD-133A-3.2 0.000 Prob. No.13-7 Class C Condenser Circulating Water Emeig. Disch.

F01.050.062 3-07A-DE027 0-2400A QAL-14 VT-3 NA 8.000 File No.= OS-522, Page No. 59.1; Problem No.=

Mech Snubber 07A OFD-121A-3.8 0.000 3-07-03; System 07A Class C F01.050.063 3-03-DE001 0-2401A OAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Mech Snubber 03 OFD-121B-3.3 0.000 Prob. No. 3-03-01 Class C Main Feedwater System F01.050.064 3-03-SRI 0-2401A QAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel 36.1 Mech Snubber 03 OFD-121B-3.3 0.000 Prob. No. 3-03-01 Class C Main Feedwater System F01.050.065 3-03-SR10 0-2401A QAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Mech Snubber 03 OFD-121B-3.3 0.000 Prob. No. 3-03-01 Class C Main Feedwater System F01.050.066 3-03-SR 1I 0-2401A QAL-14 VT-3 NA 24.000 File no. OSC-512 Paael36.1 Mech Snubber 03 OFD-121B-3.3 0.000 Prob. No. 3-03-01 Class C Main Feedwater System

EOC 20 I §t DUKE ENERGY CORPORATION CAEORY F-ASuports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System ISorIna Supports & Constant Load Supports Oconee 3 Inservice Inspection Plan for Interval 3 Outage 6 Plan Report Page 68 081812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS FO1.050.067 3-03-SR2 0-2401A QAL-14 VT-3 NA 24.000 File no. OSC-512 Pagel36.1 Mech Snubber 03 OFD-121B-3.3 0.435 Prob. No. 3-03-01 Class C Main Feedwater System F01.050.068 3-03A-DE054 0-2401A OAL-14 VT-3 NA 6.000 File no. OSC-519 Page55 Mech Snubber 03A OFD-121B-3.3 0.000 Prob. No. 3-03A-06 Class C EmergencyFeedwater System F01.050.070 3-03A-DE053 0-2402A OAL.14 VT-3 NA 6.000 File No.= OS-519, Page No. 55; Problem No.=

Mech Snubber 03A OFD-121D-3.1 0.000 3-03A-06; Emergency Feedwater System Class C F01.050.071 3-53B-DE013 0-2435B OAL-14 VT-3 NA 14.000 File NO. OS-549 Mech Snubber 53B OFD-102A-3.1 0.000 Page 78 Class B Problem No. 3-53-01 L P Injection & Decay Heat Removal F01.050.072 3-56-DE00S 0-2437A OAL-14 VT-3 NA 8.000 File No.= OSC-563, Page No. 932; Problem No.=

Mech Snubber 56 OFD-104A-3.1 0.000 3-56-02; Spent Fuel Cooi Class C F01.050.073 3-56-DE007 0-2437A OAL-14 VT-3 NA 8.000 File No.= OSC-563, Pag No. 922; Problem No.=

Mech Snubber 56 OFD-104A-3.1 0.000 3-56-02; Spent Fuel Coollng Class C F01.050.074 3-53B-DE008 0-2438B OAL-14 VT-3 NA 8.000 File No.= OS-551, Page 60.2; Problem No.3-53-04; Mech Snubber 53B OFD-102A-3.1 0.000 System 53 Class B F01.050.075 3-56-DE008 0-2438B QAL-14 VT-3 NA 8.000 File No.= OSC-563, Page No. 94.6; Problem No.=

Mech Snubber 56 OFD-104A-3.1 0.000 3-56-02; Spent Fuel Cooling Class C FO1.050.076 3-03-H6034 0-2480A QAL-14 Vr-3 NA 6.000 File No.= OSC-1224-18. Pace N- 35.2, Problem Mech Snubber 03A OFD-121D-3.1 0.000 No.= 3-03A-14; Aux Service Water Piping Class C

EOC 20 Cf

(

DUKE ENERGY CORPORATION CATEGORY FA, uports INSERViCE INSPECTION PLAN MANAGEMENT ESorina SuDoorts & Constant Load Suoports Inservice Inspection Database Management System Oconee 3 Inservice Inspection Plan for Interval 3 Outage 6 Plan Report Page 69 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS F01.050.077 3-03-H6036 0-2480A QAL-14 VT-3 NA 6.000 FrieNo.=0SC-1224-18, PageNo.38.2;Problem Mech Snubber 03A OFD-121D-3.1 0.000 No.= 3-03A-1 4; Aux Service Water Piping Class C F01.050.078 3-03-H6038 0-2480A OAL-14 VT-3 NA 6.000 File No.= OSC-1224-18, Page No. 40.2; Problem Mech Snubber 03A OFD-121D-3.1 0.000 No.= 3-03A-14; Aux Service Water Piping Class C F01.050.079 3-03-H6187 0-2480A QAL-14 VT-3 NA 6.000 File No.= OSC-1224-18, Page No. 40.2; Problem Mech Snubber 03A OFD-121D-3.1 0.000 No. 3-03A.14; Aux Service Water Piping Class C F01.050.080 3-57-NWIZ 0-2480A QAL-14 V1-3 NA 12.000 File No.OSC-1351-06 Mech Snubber 57 OFD-100A-3.2 0.000 Problem No.3-57-01 Class C Dwg # 0-3R1357001-01 PZR Relief Valve System F01.050.081 3-50-H7 0-2481A QAL-14 VT-3 NA 2.500 File No. OSC-1343-06 Voi.A of C Mech Snubber 50 OFD-100A-3.2 0.500 Prob.No. 3-53-09 Page 138 Class A Low Pressure Inj. Supply to PZR Spray FO1.050.082 3-03A-H204 1-0-2400A QAL-14 VT-3 NA 6.000 File No.= OSC-1209, Page No. 28; Problem No.=

Mech Snubber 03A OFD-121D-3.1 0.000 3-03A-1 2; Emergency Feedwater System Class C FO1.050.083 3-03A-SR33 1-0-2401A QAL-14 VT-3 NA 6.000 File No. OS-519 Mech Snubber 03A OFD-1 21 D-3.1 0.000 Page No.55 Class C Problem No. 3-03A-06 Emergency Feedwater System. Inspect with Item No. F01.032.010 F01.050.084 3-51A-H308 1-0-2439A OAL-14 VT-3 NA 4.000 File No. OSC-541 Mech Snubber 51A OFD-101A-3.4 0.000 Prob. No. 3-51-04 Page 66 Class B H.P.l.to Reactor Coolant Loops *A &6B

C C EOC 20 DUKE ENERGY CORPORATION CAEOR -A upot INSERVICE INSPEC71ON PLAN MANAGEMENT Inservice Inspection Database Management System E

ESprlna Supports & Constant Load SuDports Oconee 3 Inservice Inspection Plan for Interval 3 Outage 6 Plan Report Page 70 08n1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIATrHK CAL BLOCKS COMMENTS F01.050.085 3-51A-H309 1-0-2439A OAL-14 VT-3 NA 4.000 Flle No. OSC-541 Mech Snubber 51A OFD-101A-3.4 0.000 Prob. No. 3-51-04 Page 66 Class B H.P.l.to Reactor Coolant Loops *Am &WB F01.050.086 3-51A-H294 1-0-2439C QAL.14 VT-3 NA 4.000 FIle No. OSC-542 Mech Snubber 51A OFD-101A-3.4 0.000 Prob. No. 3-51-05 Page 44.1 Class B H.P.I.Crossover to Reactor Coolant Inl. Loops F01.050.087 3-51A-H304 1-0-2439C OAL-14 VT-3 NA 4.000 File No. OSC-541 Mech Snubber 51A OFD-101A-3.4 0.000 Prob. No. 3-51-04 Page 66 Class B H.P.l.to Reactor Coolant Loops 'A &'B8 F01.050.088 3-51A-H318 1-0-2444 OAL-14 VT-3 NA 4.000 File No. OSC-541 Mech Snubber 51A OFD-101A-3.4 °.-°° Prob. No. 3-51-04 Page 67 Class B H.P.I.Crossover to Reactor Coolant Loops 'N &"BS F01.050.089 3-01A-R13 1-1-0-2401B QAL-14 VT-3 NA 12.000 File no. 0S-507 Sht 1o`2 Hyd Snubber 01A OFD-122A-3.2 0.000 Prob. No. 3-01-09 Class B Main Steam ByPass to Condenser F01.050.090 3-53B-SR46 2-0-2435D QAL-14 VT-3 NA 6.000 File No. OSC-539 Mech Snubber 53B OFD-101A-3.3 0.000 Prob. No. 3-51-2 Pag 145 Class B H.P.I. Pumps 3A,3B,&3C Suction Header F01.050.091 3-54A-R1000 3-0-24358 QAL-14 VT-3 NA 8.000 File No.- OSC-555. Page No. 42.1; Problem No.=

Mech Snubber 54A OFD-103A-3.1 0.000 3-54-02 Class B F01.050.092 3-54A-R1 001 3-0-2435B QAL-14 VT-3 NA 8.000 File No.= OSC-554, Page No. 47.1; Problem No.=

Mech Snubber 54A OFD-103A-3.1 0.000 3-54-01; Reactor BId Spray Class B F01.050.093 3-54A-SR23 3-0-24358 QAL-14 VT-3 NA 8.000 File No.= OSC-554. Paae No. 47.1: Problem No-=

Mech Snubber 54A OFD-103A-3.1 0.500 3-54-01; Reactor Bid Spray Class B

EOC 20 C C DUKE ENERGY CORPORATION CAEORY-F-A. upot~s INSERVICE INSPECTION PLAN MANAGEMENT ISorina Suw!ots & Constant Load-Surn orts InservIce InspectIon Database Management System Oconee 3 Inservice Inspection Plan for Interval 3 Outage 6 Plan Report Page 71 08/1812003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS F01.050.094 3-51 B-H62 3-0-2436G QAL-14 VT-3 NA 4.000 File No. OSC-539 Mech Snubber 51B OFD-101A-3.2 1.062 Prob. No. 3-51-2 Page 145 Class B H.P.I. Pumps 3A,3B,&3C Suction Header F01.050.095 3-54A-SR12 3-0-2438A OAL-14 VT-3 NA 8.000 File No.= OSC-556, Page No. 65.1; Problem No.=

Mech Snubber 54A OFD-103A-3.1 0.500 3-54.03 Class B F01.050.096 3-01A-R10 4-0-2403D OAL-14 VT-3 NA 6.000 File no. OSC-51 0 Sht 1of3 Mech Snubber 01A OFD-122A-3.4 0.000 Prob. No. 3-01A-04 Class C Main Steam to Emergency F.W. Pump F01.050.097 3-01A-R6 4-0-2403D QAL-14 VT-3 NA 6.000 File no. OSC-510 Sht 1of3 Mech Snubber OA OFD-122A-3.4 0.000 Prob. No. 3-01A-04 Class C Main Steam to Emergency F.W. Pump F01.050.098 3-01A-R9 4-0-2403D OAL-14 Vr-3 NA 6.000 File no. OSC-510 Sht lof3 Hyd Snubber 01A OFD-122A-3.4 0.000 Prob. No. 3-01A-04 Class C Main Steam to Emergency F.W. Pump F01.050.099 3-01A-R3 4-2-0-2403E QAL-14 VT-3 NA 6.000 File no. OSC-51 0 Sht 2c3 Mech Snubber 01A OFD-122A-3.4 0.000 Prob. No. 3-O1A-04 Page 58 Class C Main Steam to Emergency F.W. Pump F01.050.100 3-07A-H70 6-0-2400A OAL-14 VT-3 NA 20.000 File No.= OSC-1211, Page No.27; Problem No.=

Mech Snubber 07A OFD-121A-3.8 0.000 3-07-05; System 07A Class C F01.050.101 3-07A-H71 6-0-2400A OAL-14 VT-3 NA 20.000 File No.= OSC-121 1, Page No. 27; Problem No.=

Mech Snubber 07A OFD-121A-3.8 0.000 3-07-05; System 07A Class C F01.050.102 3-07A-H72 6-0-2400A OAL-14 Vr-3 NA 24.000 File No.= OSC-121 1. Page No.28: Problem No.=

Mech Snubber 07A OFD-121A-3.8 0.000 3-07-05; System 07A Class C

r C EOC 20 DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Worint.g Smrts &ConstantLoad ~uports Oconee 3 Page 72 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REO MATtSCH DINATHK CAL BLOCKS COMMENTS F01.050.103 3-07A-H74 6-0-2400A QAL-14 VT-3 NA 20.000 File No.= OSC-121 1, Page No.28; Problem No.=

Mech Snubber 07A OFD-121A-3.8 0.000 3-07-05; System 07A Class C F01.050.104 3-07A-DE031 6-0-2402A QAL-14 VT-3 NA 24.000 File no. 0SC-521 Page 120 Mech Snubber 07A OFD-121A-3.7 0.000 Prob. No. 3-07A-01 Class C Condensate System F01.050.105 3-13-DE002 7-0-2400B OAL-14 VT-3 NA 30.000 File No. OSC-523 Page 40 Mech Snubber 13 OFD-133A-3.2 0.000 Prob. No. 13-7 Class C Condenser Circulating Water Emerg. Disch.

F01.050.106 3-53B-SR31 7-0-2436C OAL-14 VT-3 NA 14.000 File No.= OS-539, Page 143; Problem No.3-51-2; Mech Snubber 53B OFD-102A-3.1 0.000 Class B F01.050.107 3-50-RCPM-3A1-SS1 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-1011-01-0001, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575.

F01.050.108 3-50-RCPM-3A1-SS2 0-1066A OAL.14 VT-3 NA 6.000 Calculaton No. OSC-1011-01-0001, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-10OA-3.3 0-096-1575. Inspect wfthF 01.012.008.

F01.050.109 3-50-RCPM-3A1-SS3 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-101 "1-0001, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575. Inspect with FO1.012.009.

F01.050.110 3-50-RCPM-3A2-SS1 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-0991, Reactor Coolant Pump Hyd Snubber 50 OFD-100A-3.1 0.000 Motor Snubbers. Reference PIP 0-096.1575.

Class A OFD-100A-3.3 F01.050.111 3-50-RCPM-3A2-SS2 0-1066A OAL-14 VT-3 NA 6.000 Calculaton No. OSC-0991. Reactor Coolant Pumn Hyd Snubber 50 OFD-100A-3.1 0.000 Motor Snubbers. Reference PIP 0-096-1575.

Class A OFD-100A-3.3

EOC 20 C C C DUKE ENERGY CORPORATION CATEGORY F-A. Supports INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report E-Sprin SURDorts & Constant Load Supports Oconee 3 __

Page 73

• Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIA/THK CAL BLOCKS COMMENTS F01.050.112 3-50-RCPM-3A2-SS3 0-1 066A OAL-14 VT-3 NA 6.000 Calculaton No. 0SC-1011-01-0002, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575. Inspect with F01.012.010.

F01.050.113 3-50-RCPM-3B1-SS1 0-1066A OAL-14 VT-3 NA 6.000 Calculaton No. OSC-1011-01-0003, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575. Inspect with F01.012.011.

F01.050.114 3-50-RCPM-3B1-SS2 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-101 1-01-0003, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575.

F01.050.1 15 3-50-RCPM-3B1-SS3 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-0991, Reactor Coolant Pump Hyd Snubber 50 OfD-100A-3.1 0.000 Motor Snubbers. Reference PIP 0-098-1575.

Class A OFD-100A-3.3 F01.050.116 3-50-RCPM-3B2-SS1 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-1011-01-0004, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575.

F01.050.117 3-50-RCPM-382-SS2 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. OSC-1011-01-0004, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575. Inspect with F01.012.012.

F01.050.118 3-50-RCPM-3B2-SS3 0-1066A QAL-14 VT-3 NA 6.000 Calculaton No. 0SC-1011-01-0004, Reactor Hyd Snubber 50 OFD-100A-3.1 0.000 Coolant Pump Motor Snubbers. Reference PIP Class A OFD-100A-3.3 0-096-1575.

F01.050.119 3-01A-R6 0-2401B QAL-14 VT-3 CS 36.000 Struc. calc # OSC-1000; Prob. #OS 506/3-01A; Hyd Snubber 01A OFD-122A-3.1 0.000 Data point 100 Class B F01.050.120 3-01A-R7 0-2441 OAL-14 VT-3 CS 36.000 Struc. cak # OSC-1000-01-0018; Hyd Snubber 01A OFD-122A-3.1 0.000 Prob. # 3-01-01; Class B Analysis Problem Calc OSC-506; Data point 6

EOC 20 C (I (7 DUKE ENERGY CORPORATION CATEGORY F-A, Sup orts INSERVICE INSPECTION PLAN MANAGEMENT ISnrlng Inservice Inspection Database Management System Plan Report supports & Constant Load Supports Oconee 3 Page 74 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISOADWG NUMBERS PROC INSP REQ MAT/SCH DIAITHK CAL BLOCKS COMMENTS Total F01.050 Items: 115 Total F01 Items: 171

EOC 20 i C

DUKE ENERGY CORPORATION CATEGORY AUG. Augmented Inspetlons INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Pressurizer Sensing/Sam nlng Nozzle Safe Ends Oconee 3 Page 75 Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIA/THK CAL BLOCKS COMMENTS G08.001.001 3PZR-WP63-1 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 PressurIzer Sensing and Sampling Nozzles; W-X Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end G08.001.002 3PZR-WP63-2 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 Pressurizer Sensing and Sampling Nozzles; Y-Z Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end G08.001.003 3PZR-WP63-3 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 Pressurizer Sensing and Sampling Nozzles; Z-W Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end G08.001.004 3PZR-WP63-4 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 PressurIzer Sensing and Sampling Nozzles; W-X Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end G08.001.005 3PZR-WP63-5 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 PressurIzer Sensing and Sampling Nozzles; Y-Z Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end G08.001.006 3PZR-WP63-6 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 Pressurizer Sensing and Sampflng Nozzles; Z-W Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end G08.001.007 3PZR-WP63-7 ISI-OCN3-002 NDE-35 PT CS-lnconel 1.000 Pressurizer Sensing and Sampling Nozzles; Z-W Circumferential 50 1.185 Quad.

Class A Sensing Nozzle to Dissimilar Safe- end Total G08.001 Items: 7 Total GOO Items: 7

EOC 20 C,

DUKE ENERGY CORPORATION 9

CATEGORY AUG.Augmented1i, nspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System LCircumferentlal

_Ehk. c38and>NPS4" EIne Welds Wtth A Nom. Wall Oconee 3 Inservlce Inspection Plan for Interval 3 Outage 6 Plan Report Page 76 08118/2003 ITEM NUMBER IDNUMBER SYS ISO/DWG NUMBERS PROC INSP REO MATtSCH DIAITHK CAL BLOCKS COMMENTS G09.001.008 3-538-37-1 3-53B-37 NDE-35 PT SS 8.000 Circumferential 53B OFD-102A-3.2 0.250 Class B Term end Flange to Reducer G09.001.009 3LP-181-29 3LP-181 NDE-35 PT SS 10.000 This weld was listed previously as 3-536-37-29 on Circumferential 53B OFD-102A-3.2 0.250 Iso 3-53B-37 until It was transferred to Iso 3LP-1 81.

Class B Pipe to Tee G09.001.010 3-53B-37-35 3-53B-37 NDE-35 PT SS 10.000 Circumferential 53B OFD-102A-3.2 0.250 Class B Pipe to Elbow G09.001.013 3-53B.44-14 3-53B-44 NDE-35 PT SS 12.000 Circumferential 53B OFD-102A-3.1 0.180 Class B Elbow to Pipe G09.001.019 3-536-50-8 3-536-50 NDE-35 PT SS 10.000 Circumferential 53B OFD-102A-3.2 0.250 Class B Tee to Valve 3LP-13 G09.001.020 3-536-51-19 3-53B-51 NDE-35 PT SS 10.000 Circumferential 53B OFD-102A-3.2 0.250 Class B Pipe to Elbow G09.001.025 3-54A-11-17 3-54A-11 NDE-35 PT SS 8.000 Circumferential 54A OFD-103A-3.1 0.250 Class B Pipe to Elbow G09.001.027 3-54A-11-5 3-54A-11 NDE-35 PT SS 8.000 Circumferential 54A OFD-103A-3.1 0.250 Class B Pipe to Elbow

EOC 20 t

(. I DUKE ENERGY CORPORATION CATEGORY AUG. Aucmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report Circumferential Pipe Welds With A Nom. Wall Oconee 3 Page 77 f, > NP4" :and Inservice Inspection Plan for Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MAT/SCH DIATHK CAL BLOCKS COMMENTS G09.001.030 3-54A-9-32 3-54A-9 NDE-35 PT SS 8.000 Circumferential 54A OFD-103A-3.1 0.250 Class B Pipe to Elbow GO9.001.032 3SF-1 18-57 3SF-1 18 NDE-35 PT SS 8.000 This weld was listed previously as 3-56-14-57 on iso Circumferential 56 OFD-104A-3.1 0.148 3-56-14 until It was transferred to Iso 3SF-118.

Class B Pipe to Elbow G09.001.034 3-51 B-30-5 3-51 B-30 NDE-35 PT SS 6.000 Circumferential 51B OFD-101A-3.2 0.134 Class B Pipe to Elbow Total 009.001 Items: 11 Total 009 Items: 11

EOC 20 C

DUKE ENERGY CORPORATION CATEGORY AUG. Augmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System I Clsss I RTE Mounting Bosses Oconee 3 Inservice Inspection Plan for Interval 3 Outage 6 Plan Report Page 78 08/18/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DINATHK CAL BLOCKS COMMENTS G10.001.008 3-PIA2-9 ISI-OCN3-008 NDE-35 PT CS-lnconel 8.750 Reference Section 7 Paragraph 7.1.10 of the 6SI Branch 50 OFD-100A-3.1 2.250 Plan - Volumel The diameter of hole that penetrates Class A Pipe to through the nozzle Into the hot leg a .613 Dissimilar Nozzle ITE Nozzle G10.001.009 3-PIB1-11 ISI-OCN3-009 NDE-35 PT CS-Inconel 8.750 Reference Section 7 Paragraph 7.1.10 of the ISI Branch 50 OFD-100A-3.1 2.250 Plan - Volumel The diameter of hole that penetrates Class A Pipe to through the nozzle Into the hot leg = .613 Dissimilar RTE Nozzle Total G1O.001 Items: 2 Total 010 Items: 2

C C C EOC 20 DUKE ENERGY CORPORATION CATEGORY AUG. Aumented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report

• Reactor Coolant Pump 3A2 and 3B1 Alternate Oconee 3 Page 79

.Egamination Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMI 3ERS PROC INSP REQ MAT/SC H DIA/THK CAL BLOCKS COMMENTS G11.001.001 3RCP-3A2 OM-1201-1217 OAL-13 VT-1 SS 0.000 Inspect Fig. Joint,Studs and AdJ. area Per Req. for 50 OFD-100A-3.1 0.000 Relief ONS-01 1. Ref. Section 7 Paragraph 7.1.11 of Class A the ISI Plan - Volume 1.

RCP 3A2 Main Flange; Each refueling outage the flange joint and surrounding area will be Inspected for any accumulation of boron or stud degradation.

See 2nd interval request for relief ONS-01 0.( Note:

when item# B06.190.002 is inspected then this inspection will not be required.

G11.001.002 3RCP-3B1 OM-1201-1217 QAL-13 VT-i SS 0.000 Inspect Fig. Joint,Studs and Adj. area Per Req. for 50 OFD-100A-3.1 0.000 Relief ONS-01 1. Ref. Section 7 Paragraph 7.1.11 of Class A the ISI Plan - Volume 1.

RCP 3B1 Maln Flange; Each refueling outage the flange joint and surrounding area will be Inspected for any accumulation of boron or stud degredation.

See 2nd interval request for reflef ONS-010.( Note:

when Item# B06.190.003 Is Inspected then this inspection will not be required.

Total G1I.001 hems: 2 Total G11 Items: 2

EOC 20 C' I C (

DUKE ENERGY CORPORATION CATEGORY AUG. Auwmented Inspections INSERVICE INSPECTION PLAN MANAGEMENT Inservice Inspection Database Management System Plan Report PI System U1prade Oconee 3 Page 80 Inservice Inspection Plan for Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYS ISO/DWG NUMBERS PROC INSP REQ MATISCH DIAITHK CAL BLOCKS COMMENTS G12.001.005 3-51B-31-25 3-518-31 NDE-35 PT SS 4.000 Circumferential SIB OFD-101A.3.2 0.120 Class B Tee to Reducing Elbow G12.001.011 3-51B-41-31 3-S1B-41 NDE-35 PT SS 4.000 Circumferential 51B OFD-1O1A-3.1 0.120 Class B Pipe to Valve 3HP-72 G12.001.016 3-51B-57-24A 3-51B-57 NDE-35 PT SS 2.000 Circumferential 51B OFD-101A-3.1 0.154 Class B Pipe to Reducer Total G12.001 Hems: 3 Total G12 Hems: 3

4.0 Results Of Insnectlons Performed The results of each examination shown in the final Inservice Inspection Plan (Section 3 of this report) are included in this section. The completion date and status for each examination are shown. All examinations revealing reportable indications and any corrective action required as a result are described in further detail in Subsections 4.1 and 4.2. Corrective measures performed and limited examinations are described in further detail in Subsections 4.3 and 4.4.

The information shown below is a field description for the reporting format included in this section of the report:

Item Number = ASME Section Xl Tables IWB-2500-1 (Class 1), IWC-2500-1 (Class 2), IWF-2500-1 (Class 1 and Class 2),

Augmented Requirements ID Number - Unique Identification Number Sys = Component System Identification Insp Date Date of Examination Insp Status - CLR Clear REC Recordable REP Reportable Insp Limited = Indicates inspection was limited.

Coverage obtained is listed Geo. Ref. - Y Yes (Geometric Reflector N No applies only to UT)

RFR (Relief Request) - Y Yes NNo Comments - General and/or Detail Description EOC 20 Refueling Outage Report Page 1 of 4 Oconee Unit 3 Revision 0 Section 4 August 18, 2003

( DUKE ENER 2 ;ORPORATION QUALITY ASSURANCE TECHNICAL SERVICES

(

In-Service Inspection Database Management System Run D EOC 20 Page 1 Oconee 3 InservIce Inspection Listing Plant: Oconee 3 08118/2003 Interval 3 Outage 6 ITEM NUMBER if NMlIAFhR QY.RTFM I QP nATC INhIP QTATI IQ INIQ0 I IkIATFn fIn MCC RFR PftARNAR I-. --.- ... 11 I I-B02.011.002 3-PZR-WP28 50 05/12/2003 CLR 97.05% N Y Limited Scan Relief Request # 03-005 B02.012.002 3-PZR-WP7-1 50 05/12/2003 CLR 97.50% N Y Umited Scan Relief Request # 03-005 B02.040.001 3-SGA-WG58-1 50 05/2212003 CLR 93.60% N Y U-mited Scan Relief Request # 03-005 B05.140.002 3-50-21-1 50 05/07/2003 CLR N N B05.140.003 3-50-21-23 50 05/07/2003 CLR N N B06.010.001 3RPV-26-209-1 50 05112/2003 CLR N N B06.010.002 3RPV-26-209-02 50 05/12/2003 CLR N N B06.010.003 3RPV-26-209-03 50 05/1212003 CLR N N B06.010.004 3RPV-26-209-04 50 05/12/2003 CLR N N B06.010.005 3RPV-26-209-05 50 05/12/2003 CLR N N 806.010.006 3RPV-26-209-06 50 05/12/2003 CLR N N B06.010.007 3RPV-26-209-07 50 05/12/2003 CLR N N B06.010.008 3RPV-26-209-08 50 05/12/2003 CLR N N B06.010.009 3RPV-26-209-09 50 05/12/2003 CLR N N B06.010.025 3RPV-26-209-61 50 05/13/2003 CLR N N B06.010.026 3RPV-26-209-26 50 05/13/2003 CLR N N B06.010.027 3RPV-26-209-27 50 05/13/2003 CLR N N B06.010.028 3RPV-26-209-28 50 05113/2003 CLR N N 806.010.029 3RPV-26-209-29 50 05/13/2003 CLR N N B06.010.030 3RPV-26-209-30 50 05/13/2003 CLR N N B06.010.031 3RPV-26-209-31 50 05113/2003 CLR N N B06.010.032 3RPV-26-209-32 50 05/13/2003 CLR N N B06.010.033 3RPV-26-209-33 50 05/13/2003 CLR N N B06.010.034 3RPV-26-209-67 50 0511312003 CLR N N B06.010.035 3RPV-26-209-35 50 05/13/2003 CLR N N B06.010.051 3RPV-26-209-51 50 05/14/2003 CLR N N B06.010.052 3RPV-26-209-52 50 05/14/2003 CLR N N B06.010.053 3RPV-26-209-53 50 05/14/2003 CLR N N 806.010.054 3RPV-26-209-54 50 05/14/2003 CLR N N B06.010.055 3RPV-26-209-55 50 05/14/2003 CLR N N B06.010.056 3RPV-26-209-56 50 05/14/2003 CLR N N B06.010.057 3RPV-26-209-57 50 05/14/2003 CIR N N B06.010.058 3RPV-26-209-58 50 05/14/2003 CLR N N B06.010.059 3RPV-26-209-59 50 05/14/2003 CLR N N B06.010.060 3RPV-26-209-60 50 05/12/2003 CLR N N B06.030.001 3RPV-25-209-01 50 05/12/2003 CLR N N

C DUKE ENER G CORPORATION C

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Oconee 3 Inservice Inspection Listing Page 2 Plant: Oconee 3 08/1812003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMIED GEO REF RFR COMMENTS B06.030.001A 3RPV-25-209-01 50 05/12/2003 CLR -- N N B06.030.002 3RPV-25-209-02 50 05/12/2003 CLR --. N N B06.030.002A 3RPV-25-209-02 50 05/12/2003 CLR -- N N B06.030.003 3RPV-25-209-03 50 05/12/2003 CI.-- N N B06.030.003A 3RPV-25-209-03 50 05/12/2003 CLR - N N B06.030.004 3RPV-25-209-04 50 05/12/2003 CLR -- N N B06.030.004A 3RPV-25-209-04 50 05/12/2003 CIR -- N N B06.030.005 3RPV-25-209-05 50 05/12/2003 CLR N N B06.030.005A 3RPV-25-209-05 50 05/12/2003 CLR -- N N B06.030.006 3RPV-25-209-06 50 05/12/2003 CIR -- N N B06.030.006A 3RPV-25-209-06 50 05/12/2003 CLR - N N B06.030.007 3RPV-25-209-07 50 05/12/2003 CLR - N N B06.030.007A 3RPV-25-209-07 50 05/12/2003 CLR - N N B06.030.008 3RPV-25-209-08 50 05/1212003 CLR - N N B06.030.008A 3RPV-25-209-08 50 05/1212003 CLR - N N B06.030.009 3RPV-25-209-09 50 05/12/2003 CLA -- N N B06.030.009A 3RPV-25-209-09 50 05/212003 CLR - N N B06.030.025 3RPV-25-209-61 50 05/08/2003 CLR - N N B06.030.025A 3RPV-25-209-61 50 05/08/2003 CIR - N N B06.030.026 3RPV-25-209-26 50 05/0812003 CLR -- N N B06.030.026A 3RPV-25-209-26 50 05/02003 CLR - N N B06.030.027 3RPV-25-209-27 50 05/08/2003 CLR N N B06.030.027A 3RPV-25-209-27 50 05/82003 CIR -- N N 806.030.028 3RPV-25-209-28 50 05/08/2003 CLR - N N B06.030.028A 3RPV-25-209-28 50 05/08/2003 CIR -- N N 806.030.029 3RPV-25-209-29 50 05/08/2003 CLR N N B06.030.029A 3RPV-25-209-29 50 05/08/2003 CLR N N B06.030.030 3RPV-25-209-30 50 05/08/2003 CIR - N N B06.030.030A 3RPV-25-209-30 50 05/8/2003 CLR .-- N N B06.030.031 3RPV-25-209-31 50 05/08/2003 CLR .-- N N B06.030.031A 3RPV-25-209-31 50 05/082003 CIR --- N N B06.030.032 3RPV-25-209-32 50 05/08/2003 CIAR - N N B06.030.032A 3RPV-25-209-32 50 05/08/2003 CLR - N N B06.030.033 3RPV-25-209-33 50 05/08/2003 CLR - N N B06.030.033A 3RPV-25-209-33 50 05/08/2003 CLR - N N B06.030.034 3RPV-25-209-67 50 05/08/2003 CIR -- N N

C DUKE ENER CORPORATION QUALITY ASSURANCE TECHNICAL SERVICES

(

In-Service Inspection Database Management System Run D EOC 20 Oconee 3 InservIce Inspection Listing Page 3 Plant: Oconee 3 08t18/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS B06.030.034A 3RPV-25-209-67 50 05/08/2003 CLR N B06.030.035 3RPV-25-209-35 50 05/08/2003 CLR N B06.030.035A 3RPV-25-209-35 50 05t08/2003 CLR N B06.030.051 3RPV.25-209-51 50 05/14/2003 CLR N B06.030.051A 3RPV-25-209-51 50 05/14/2003 CLR N B06.030.052 3RPV-25-209-52 50 05/14/2003 CLR N B06.030.052A 3RPV-25-209-52 50 05/14/2003 CLR N B06.030.053 3RPV-25-209-53 50 05/14/2003 CLR N B06.030.053A 3RPV-25-209-53 50 05/14/2003 CLR N 906.030.054 3RPV-25-209-54 50 05/14/2003 CLR N B06.030.054A 3RPV-25-209-54 50 05/14/2003 CLR N B06.030.055 3RPV-25-209-55 50 05/14/2003 CLR N B06.030.055A 3RPV-25-209-55 50 05/14/2003 CLR N B06.030.056 3RPV-25-209-56 50 05/14/2003 CLR N B06.030.056A 3RPV-25-209-56 50 05/1412003 CLR N B06.030.057 3RPV-25-209-57 50 05/14/2003 CLR N B06.030.057A 3RPV-25-209-57 50 05/14/2003 CLR N B06.030.058 3RPV-25-209-58 50 05/14/2003 CLR N B06.030.058A 3RPV-25-209-58 50 05/14/2003 CLR N B06.030.059 3RPV-25-209-59 50 05/14/2003 CLR N B06.030.059A 3RPV-25-209-59 50 05/14/2003 CLR N B06.030.060 3RPV-25-209-60 50 05/12/2003 CLR N B06.030.060A 3RPV-25-209-60 50 05/1212003 CLR N B06.050.001 3RPV-WASH-BUSH 50 05/16/2003 CLR N Washers and Bushings for 25 thru 35 by JWH on 5-8-03.

Washers and Bushings for 51 thru 59 by JWH on 5-14-03.

Washers and Bushings for 1 thnu 9 and 60 by JGR on 5-16-03.

B07.030.002 3SGA-LMW-BOLTS 50 05/08t2003 CLR N N B07.030.003 3SGB-UMW-BOLTS 50 05/12/2003 CLR N N B07.030.007 3SGB-UHIC-BOLTS 50 05/12/2003 CLR N N B07.030.008 3SGB-LHIC-BOLTS 50 05/27/2003 REC N N Discrepancies that were found were reviewed by steam generator maintenance engineer and the bolting for the steam generator lower head inspection cover was found to be acceptable for service through another fuel cycle.

B07.070.003 3-53A-CF13 53A 05/12/2003 CLR N N B07.070.007 3-53A-LP1 53A 04/27/2003 CLR N N B07.070.019 3-51 A-HPi 88 51A 05/01/2003 CLR N N B07.080.001 3-RPV-CRD-BOLTS 50 05/15/2003 CLR N N Inqnamd hfc mmItMn C 1Pl 1r, *01A

DUKE ENER! CORPORATION QUALITY ASSURANCE TECHNICAL SERVICES C

In-Service Inspection Database Management System Run D EOC 20 Oconee 3 Inservice Inspection Listtng Page 4 Plant: Oconee 3 08/18/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS B07.080.002 3-RPV-CRD-RINGS 50 05/15/2003 CLR ... N N Inspected Hoiising Rings on CRD # 34.

B09.011.014 3-PIB2-1 50 05/15/2003 CLR -- N N B09.011.014A 3-PIB2-1 50 05/15/2003 CLR - N N B09.01 1.023 3-PDB2-1 50 05/07/2003 CLR - N Y Limited Scan Relief Request # 03-005 B09.011.023A 3-PDB2-1 50 05/08/2003 REC - N N The indicatioris recorded were acceptable.

There was a. 20 inch rounded indication and a .10 Inch linear Indication found.

B09.011.027 3-PSL-3 50 05/15/2003 CLR N B09.011.027A 3-PSL-3 50 05/1512003 CLR N B09.011.030 3-PSL-6 50 05/1512003 CLR N B09.011.030A 3-PSL-6 50 05/15/2003 CLR N B09.011.036 3HP-241-9 51A 05/12/2003 CLR N B09.011.036A 3HP-241-9 51A 05/09/2003 CLR N 809.011.050 3-53A-17-8 53A 05/14/2003 CLR 92.90% Y Umited Sean Relief Request #03-005 809.011.050A 3-53A-17.8 53A 05/14/2003 CLR N B09.011.051 3LP-1 31-2 53A 05/16/2003 CLR N Umited Scan Relief Request 03-005 B09.011.051A 3LP-1 31-2 53A 05/16/2003 CLR N B09.021.002 3-50-20-11 50 05/09/2003 CLR N B09.021.013 3-PSP-25 50 05/1512003 CLR N B09.021.015 3-PSP-5 50 05/15/2003 CLR N B09.021.017 3-PSP-7 50 05/15/2003 CLR N 809.021.026 3-51A-61-17 51A 05/0912003 CLR N 809.021.027 3HP-242-23 51A 05/17/2003 CLR N B09.021.053 3-51A-69-35 51A 05/16/2003 CLR N B09.021.054 3-51A-69-43 51A 05/16/2003 CLR N B09.021.055 3-51A-69-46 51A 05/16/2003 CLR N B09.021.056 3-51A-69-50 51A 05/16/2003 CLR N B09.021.063 3HP-240-8 51A 05/17/2003 CLR N B09.021.065 3LP-1 30-12 53A 05/17/2003 CLR N B09.032.003 3-PIB2-10 50 05/18/2003 CLR ... N B09.040.004 3-50-152-3 50 05/07/2003 CLR N 7...%

B09.040.005 3-50-152-5 50 05/07/2003 CLR N B09.040.012 3-50-20-32 50 05/09/2003 CLR N B09.040.013 3-50-21.71 50 05/09/2003 CLR N C01.010.001 3-SGA-WG8-1 05/06/2003 REC Y Indications # 1.60° and # 2-600 were reported during inspection in August of 1992. The indications have not shown any growth from nrc~alneto InMnOeM044e

DUKE ENERG( oORPORATION QUALITY ASSURANCE TECHNICAL SERVICES C

In-Service Inspection Database Management System Run D EOC 20 Page 5 Oconee 3 InservIce Inspection Listing Plant: Oconee 3 08118/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DA6TE INSP STATUS INSP UlMITED GE O REF RFR COMMENTS Reflef Request # 97-01 C01.010.002 3-SGA-WG8-2 05/06/2003 REC 78.56% N Y Indications # 1-60° was reported during Inspection In August of 1992. The Indication has not shown any growth from previous Inspections.

Relief Request # 97-01 C02.031.002 3-LPCB-INLET 53A 01/23/2003 CLR C02.031.003 3-LPCB-OUTLET 53A 01/23/2003 CLR C03.01 0.005 3SGB-WG84-XY 03 05/10/2003 CLR C03.010.006 3SGB-WG84-YX 03 05/10/2003 CLR C03.020.002 3-01A-H1A 01A 05/22/2003 CLR C03.020.004 3-01A-H4A 01A 05/15/2003 CLR C03.020.006 3-01A-H5A 01A 05/10/2003 CLR C03.020.007 3-O1A-H5B 01A 05/08/2003 CLR C03.020.018 3-14B-H20D 14B 05/15/2003 CLR C03.020.019 3-14B-H22A 14B 05/17/2003 CUR C03.020.020 3-14B-H22D 14B 05/17/2003 CLR C03.020.028 3-53B-R2 53B 01/16/2003 CLR C03.020.031 3-54A-H25 54A 01/14/2003 CLR C03.020.032 3-54A-H35 54A 01/27/2003 CLR C03.020.033 3-54A-H39 54A 01/16/2003 CLR C03.020.043 3SGB-WG87-XY 03 05/10/2003 CLR C03.020.044 3SGB-WG87-YX 03 05/10/2003 CLR C05.011.001 3LP-1 34-64 53A 05/09/2003 CLR Umited Scan Relief Request # 03-005 C05.011.001A 3LP-1 34-64 53A 05/09/2003 CLR C05.011.005 3-53A-17-17 53A 05/14/2003 CLR Umited Scan Relief Request # 03-005 C05.011.005A 3-53A-17-17 53A 05/14/2003 REC A .15 Inch X .20 Inch rounded Indication was found during inspection of this weld. It was acceptable per Acceptance Standard F, figure F2.

C05.021.003 3-51A-101.8 51A 05/14/2003 CLR N N C05.021.003A 3-51A-101-8 51A 05/13/2003 CLR N N C05.021.004 3-51 A-101 -9 51A 05/14/2003 CLR N N C05.021.004A 3-51A-101-9 51A 05/13/2003 CLR N N C05.021.005 3-51A-118-1 51A 05/19/2003 REC Y N Indication # 1-60 Is a geometric reflector due to weld root configuration. This was verified using a 700 wedge on the 60° cal., WSY-70 and review of RT film.

C05.021.005A 3-51 A-1 18-1 51A 05/17/2003 CL. N N C05.021.008 3-51 A-118-21 51A 05/19/2003 CLR N N

C DUKE ENERGQ.:;ORPORATION

(

QUALITY ASSURANCE TECHNICAL SERVICES In-Service InspectIon Database Management System Run D EOC 20 Page 6 Oconee 3 Inservice Inspection Listing Plant: Oconee 3 Interval 3 Outage 6 08118/2003 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS C05.021.008A 3-51 A-1 18-21 51A 05/18/2003 CLR N N C05.021.016 3-51A-120-10 51A 01/14/2003 CLR N y Umrted Scan Relief Request # 03-005 C05.021.016A 3-51A-120-10 51A 01/14/2003 CLR N N C05.021.021 3-51A-121-22 51A 01/13/2003 CLR N Y Umited Scan Relief Request # 03-005 C05.021.021A 3-51A-121-22 51A 01/13/2003 CLR N N C05.021.025 3-51A-140-19 51A 05/20/2003 CLR N N C05.021.025A 3-51A-140-19 51A 05/16/2003 CLR N N C05.021.035 3-51A-52-20 51A 01/20/2003 CLR 96.00Y% N y Umited Scan Relief Request # 03-005 C05.021.035A 3-51A-52-20 51A 01/20/2003 CLR N N C05.021.044 3-51 A- 119-41 51A 01/14/2003 CLR N Y Umited Scan Relief Request # 03-005 C05.021.044A 3-51A-119-41 51A 01/14/2003 CLR _.. N N C05.021.046 3-51A-59-40 51A 01/15/2003 CLR N N C05.021.046A 3-51A-59-40 51A 01/15/2003 CLR N N C05.021.056 3-51A-75-34 51A 01/15/2003 REC y Y Indication #1 is a 3600 Intermittant reflector due to ID counterbore. .200 from the weld centerline on the valve side of the weld. Condition confirmed by review of RT film.

Umited Scan Relief Request # 03-005 C05.021.056A 3-51A-75-34 51A 01/15/2003 CLR N N C05.021.057 3-51A-77-13 51A 01/15/2003 CLR N N C05.021.057A 3-51A-77-13 51A 01/15/2003 CLR ... N N C05.021.066 3-51A-87-8 51A 05/12/2003 CLR 80.09%

... N Y Umited Scan and Coverage Relief Request # 03-005 C05.021.066A 3-51A-87-8 51A 05/01/2003 CLR N N C05.021.067 3-51A-87-9 51A 05/12/2003 REC 93.80% y Y Indication # 1 is a geometrical Indication from the weld root.

Signal would not hold up to skew. 700 produced less than 50%

... amplitude. Plotting and review of past radiographs supports this detefmination.

Umited Scan Relief Request # 03-005 C05.021.067A 3-51A-87-9 51A 05/01/2003 CLR N N C05.021.075 3-51A-1 18-4 51A 05/19/2003 CLR N N C05.021.075A 3-51A-1 18-4 51A 05/17/2003 CLR N N C05.021.080 3-51A-140-26 51A 05/20/2003 CLR N N

1. 60 9

C05.021.080A 3-51 A-1 40-26 51A 05/16/2003 CLR N N C05.021.085 3-51 A-52-26 51A 01/20/2003 CLR N N C05.021.085A 3-51A-52-26 51A 01/20/2003 CLR N N C05.021.090 3-51A-59-42 51A 01/15/2003 CLR N y Uimited Scan Relief Request # 03-005 C05.021.090A 3-51A-59-42 51A 01/15/2003 CLR N N C05.021.095 3-51 A-87-1 6 51A 05/12/2003 CLR N y Ljmitpd Sonn RAll4f Rpm ,tat

• nfl.nnr,

DUKE ENERG(; ORPORATION QUALITY ASSURANCE TECHNICAL SERVICES (2

In-Service Inspection Database Management System Run D EOC 20 Oconee 3 Inservice Inspection Listing Page 7 Plant: Oconee 3 08118/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS C05.021.095A 3-51A-87-16 51A 05/01/2003 CLR N C05.021.109 3-51A-66-12 51A 01/13/2003 CLR N C05.021.109A 3-51A-66-12 51A 01/13/2003 CLR N C05.021.1 10 3-51A.66-25 51A 01/13/2003 CLR 92.80% Y Umited Scan Relief Request # 03-005 C05.021.110A 3-51 A-66-25 51A 01/13/2003 CLR N C05.021.111 3HP-365-37 51A 01/13/2003 CLR ... N C05.021.11 1A 3HP-365-37 51A 01/13/2003 CLR N C05.021.112 3HP-343-4 51A 05/12/2003 CLR N C05.021.112A 3HP-343-4 51A 05/09/2003 CLR N C05.021.113 3-51 A-86-8 51A 01/22/2003 CLR N C05.021.113A 3-51A-86-8 51A 01/21/2003 CLR N C05.021.114 3-51A-86-14 51A 01/22/2003 CLR N C05.021.114A 3-51A-86-14 51A 01/2212003 CLR N C05.021.115 3-51A-86-15C 51A 01/22/2003 CLR N C0.021.115A 3-51A-86-15C 61A 01/22/2003 CLR N C05.021.116 3-51A-86-22 51A 01/21/2003 CLR N C05.021.116A 3-51A-86-22 51A 01/21/2003 CLR N C05.021.117 3-51A^86-3 51A 01/2212003 CLR N C05.021.1 17A 3-51A-86-3 51A 01/21/2003 CLR N C05.021.118 3-51A-86-7 51A 01/22/2003 CLR N C05.021.11 8A 3-51A-86-7 51A 01/21/2003 CLR N C05.030.003 3.51 B-30-12 51B 05/13/2003 CLR N C05.030.006 3-51 B-59-22A 51B 01/16/2003 CLR N C05.041.002 3-51 B-30-1 1 51B 05/13/2003 CLR N C05.051.006 3MS-122-1 01A 05/13/2003 REC N Indication R 1-60° and #3-600 are geometric reflectors from the weld to backing ring Interface. Indication # 2-600 and # 48600 are geometric reflectors from the outside comer of the backing ring.

This was confirmed using a 700 wedge on the 60°calibration plus a BI-Modal transducer. The weld ticket confirms that a backing ring was used.

C05.051.006A 3MS-122-1 01A 05/12/2003 CLR N N C05.051.009 3MS-1 B-A 01A 05/13/2003 REC V N Indication # 1 and # 3 are geometrical reflectors from the comer of the backing ring. Indication # 2 Isgeometrical reflector from te-in of weld to backing ring. Plotting of indications and review of radiographs support this determination.

C05.051.009A 3MS-1 B-A 01A 05/10/2003 CLA N N C05.051.017 3FWD-83-F 03 05/19/2003 REC V N Indications #1. #2. and #3 are oeometrical reflectors (3f00 from

DUKE ENERt vORPORATION OUALITY ASSURANCE TECHNICAL SERVICES (7

In-Service Inspection Database Management System Run D EOC 20 Page 8 Oconee 3 Inservice Inspection Listing Plant: Oconee 3 08118/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS the backing ring. 70° produced less then 50% and signals did not hold up to skewing. WSY-70 did not indicate a flaw being present.

Plotting of Indications support this determination.

C05.051.01 7A 3FWD-83-F 03 05/17/2003 CLR N C05.051.019 3-03-29-WG91-D 03 05/19/2003 REC N Indication #1-600 Is a seperate Indication on the ID surface 1.8 inches long with a through wall of 0.07 Inch. This Is acceptable per IWB-3514.

C05.051.01 9A 3-03-29-WG91-D 03 05/16/2003 CLR N C05.051.020 3-03-30-WG91-C 03 05/10/2003 CLR N Uimited Scan Relief Request # 03-005 C05.051.020A 3-03-30-WG91-C 03 05/10/2003 CLR N C05.051.023 3-03A-97-13 03A 01/14/2003 REC V Indication # 1 is a 360 intermittant Indication due to the ID counterbore. Ampritude on the 70° confirmation scan was less than 20%. Indication # 2 is a 360° intermittant indication due to the ID backing ring. Backing ring verified with 0° thickness measurements and construction data.

C05.051.026A 3-03A-97.1 3 03A 01/14/2003 CLR N C05.051.034 3LPS-478-76 14B 01/13/2003 CLR N C05.051.034A 3LPS-478-76 14B 01/1312003 CLR N C05.051.039 3LPS-477-53 14B 01/14/2003 REC Y Indication # 1 Is a 360° intermittant reflector due to the backing ring. Indication is not detectable from opposite side scan. The 700 shear confirmation scan found only 25% amplitude. Backing ring verified with 00 thickness measurements and construction data.

C05.051.039A 3LPS-477-53 14B 01/14/2003 CLR N C05.051.044 3LPS-478-77 14B 01/13/2003 CLR N C05.051 .044A 3LPS-478-77 14B 01/13/2003 CLR N C05.051 .045 3LPS-478-9 148 01/13/2003 REC V Indication # 1 Is a 3600 Intermittant reflector due to the backing ring. Indication Is not detectable from opposite side scan. The 70° shear confirmation scan found only 20% amplitude. Backing ring verified with 0° thickness measurements and construction data.

C05.051.045A 3LPS-478-9 14B 01/13/2003 CLR N C05.081.006 3MS-15A-F-1 01A 05/19/2003 CLR N C05.081.010 3FWD-83-C 03 05/17/2003 CLR N D02.020.003 3-01A-LC-1605 01A 01/15/2003 CLR N D02.020.004 3-01A-R1 01A 01/15/2003 REC N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.01 5 3-03A-DE048 03A 03/27/2003 CLR N D02.020.028 3-03A-H141 03A 01/20/2003 CLR N

DUKE ENERG§ CORPORATION C

QUALITY ASSURANCE TECHNICAL SERVICES In-ServIce Inspection Database Management System Run 0 EOC 20 Oconee 3 Inservice Inspection Listing Page 9 Plant: Oconee 3 08f18i2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS D02.020.031 3-03A-H1-52 03A 03/27/2003 REC N N Discrepanciessthat were found were reviewed by civil enalneering and the support was found to be acceptable for service.

D02.020.043 3-03A-SR1 77 03A 02/06/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.047 3-03A-H10 03A 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.048 3-03A-H1 1 03A 02/24/2003 REC N N Discrepancies that were found were reviewed by CMI engineering and the support was found to be acceptable for service.

D02.020.049 3-03A-H1 10 03A 01/21/2003 CLR N N D02.020.050 3-03A-H1-59 03A 01/15/2003 CLR N N D02.020.061 3-03A-SR1 19 03A 06/02/2003 CLR N N D02.020.062 3-03A-SR121 03A 01/15/2003 CLR N N D02.020.067 3-03A-SR138 03A 01/20/2003 CLR N N D02.020.068 3-03A-SR139 03A 01/20/2003 CLR N N D02.020.091 3-04A-SR3 04A 02/20/2003 CLR N N D02.020.096 3-07A-SR15 07A 01/15/2003 CLR N N D02.020.103 3-13-SR2 13 01/15/2003 CLR N N D02.020.1 10 3-144B-DE050 14B 02/20/2003 CLR N N D02.020.112 3-144B-DE067 14B 02/20/2003 CLR N N D02.020.113 3-144B-DE068 14B 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98601580 was written to correct problems.

D02.020.114 3-14B-DE069 14B 02/20/2003 CLR N N D02.020.116 3-14B-DE071 14B 02/20/2003 CLR N N D02.020.117 3-14B-H1-5 14B 12/11/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.118 3-144B-H22 14B 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order #98588755 was written to correct problems.

D02.020.119 3-14B-H23 14B 02/20/2003 CLR N N D02.020.120 3-14B-H28 14B 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.121 3-14B-H101 14B 01/20/2003 CLR N N D02.020.122 3-114B-H102 14B 01/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.123 3-14B-H17 14B 12/11/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

( DUKE ENERLOCORPORATiON

(

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Oconee 3 Inservice Inspection Listing Page 10 Plant: Oconee 3 08/182003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS D02.020.124 3-14B-JGM-2706 14B 01108/2003 REC - N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.125 3-14B-JTC-0101 14B 12/31/2002 CLR N N D02.020.126 3-14B-ML-5005 14B 01/06/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.127 3-14B-R101 14B 01/22J2003 CLR N N D02.020.128 3-14B-R103 146 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

D02.020.143 3-57-H5 57 05/01/2003 CLR N N D02.020.149 1-WL 100A-KO001 WL 11/25/2002 CLR N N D02.020.151 2-WL- 100A-K0032 WL 11/26/2002 CLR N N D02.030.002 3-03-SR3 03 01/08/2003 CLR N N D02.040.001 3-01A-H7 01A 03/27/2003 CLR N N D02.040.002 3-01A-H8 01A 01/21/2003 CLR N N D02.040.003 3-03-H48 03 01/06/2003 CLR N N D02.040.004 3-03-H49 03 01/15/2003 CLR N N D02.040.005 3-03-H50 03 03/27/2003 CLR N N D02.040.006 3-03-H58 03 01/08/2003 REC N N Discrepancies that were found were reviewed by citl engineering and the support was found to be acceptable for service.

D02.040.007 3-03-H59 03 01/08/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order #98575700 was written to correct problems.

D02.040.019 3-07A-H1-5 07A 01/08/2003 CLR N N D02.040.024 3-08-Hi 08 01/21/2003 CLR N N D02.040.041 3-144B-H9 14B 12/1212002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order #98573695 was written to correct problems.

F01.010.001 3-51A-H12B 51A 05/01/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order 98599295 was written to correct problems.

F01.010.002 3-51A-H2B 51A 05/05/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.010.005 3-59-H28 59 05/25/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.011.001 3-51A.H10A 51A 05/06/2003 REC N N Discrepancies that were found were reviewed by cviv engineering and the support was found to be acceptable for service. Work Order # 98598670 was written to correct problems.

C DUKE ENERNES 'ORPORATiON QUALITY ASSURANCE TECHNICAL SERVICES c

EOC 20 In-Service Inspection Database Management System Run D Oconee 3 InservIce Inspection Lising Page 11 Plant: Oconee 3 Interval 3 Outage 6 0811812003 ITEM NUMBI IR ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS FO1.01 1.002 3-51A-H12A 51A 05/1212003 REC - N N Discrepancies that were found were reviewed by civil engineering I

and the support was found to be acceptable for service.

F01.011.008 3-59-H6514 59 05/09/2003 REC - N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.012.011 3-50-RCPM-3B1-SS1 50 05/0112003 CLR N N F01.020.001 3-01A-H4A 01A 05/06/2003 REC N N Discrepancies that were found were reviewed by civi engineering and the support was found to be acceptable for service.

F01.020.002 3-01 A-H5A 01A 05/0912003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.020.020 3-53B-DE026 538 12/1212002 CLR N N F01.020.021 3-538-DE027 53B 12/12/2002 CLR N N F01.020.022 3-53B-DE028 53B 12/1212002 CLR N N F01.020.029 3-54A-DE003 54A 12112/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order #98584328 was written to correct problems.

F01.020.030 3-54A-H25 54A 01/13/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.020.035 3-54A-SR19 54A 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order #98585413 was written to correct problems.

F01.020.048 3-51 B-H24 51B 12/02/2002 CLR N N F01.020.051 3-51 B-H63 51B 05/08/2003 CLR N N F01.021.005 3-14B-H20D 14B 05/16/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.021.006 3-14B-H22A 14B 05/18/2003 REC N N Discrepancies that were found wer reviewed by Cvil engineering and the support was found to be acceptable for service. There were weld deficiencies problems found on support 546-0-2477-Hi 5A. This support Is part of a gang hanger that adjoins 3-14B-H22A. PIP 0-03-03262 was written to document this support problem and Work Orders # 98279256 and #

98279258 were written to correct problems.

F01.021.007 3-14B-H22D 14B 05/18/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.021.011 3-51 A-DE006 51A 12/02/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order #98571579 was written to correct problems.

F01.021.012 3-51 A-DE083 51A 02/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering

- 8 + - - _§ - s 4!- - A A- S. _ _ _ _- _ K- _ *_

DUKE ENERS CORPORATION

(

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Oconee 3 Inservlce Inspection Listing Page 12 Plant: Oconee 3 08/18/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP UMITED GEO REF RFR COMMENTS F01.021.013 3-51A.DE084 51A 02/20/2003 CLR -- N N F01.021.014 3-51A-DE085 51A 12/09/2002 CLR N N F01.021.024 3-53B-R2 53B 01/20/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.021.030 3-56-DE052 56 12/09/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.021.035 3-51 B-SB-1002 51B 05108/2003 CLR N N F01.022.009 3-53B-DE013 53B 11/25/2002 CLR N N F01.022.011 3-53B-H43 53B 12/02/2002 CLR N N P01.022.014 3-53B-SR46 53B 12/12/2002 CLR N N F01.022.015 3-54A-H35 54A 01/27/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.022.016 3-54A-H39 54A 01/20/2003 REC N N Discrepancies that were found were reviewed by civii engineering and the support was found to be acceptable for service.

F01.022.020 3-01A-H1 01A 02/20/2003 CLR N N 101.022.025 3-51 B-H5535 51B 12102/2002 hEC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.030.006 3-03A-DE048 03A 03/27/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.030.039 3-57-H5 57 05/01/2003 CLR N N F01.031.002 3-03A-H1 1 03A 02/24/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.031.003 3-03A-H1-10 03A 01/21/2003 REC N N Discrepancies that were found were reviewed by civii engineering and the support was found to be acceptable for service.

F01.031.011 3-04A-SR3 04A 02120/2003 REP N N Discrepancies that were found were reviewed by civii engineering and the support was found to be inoperable. PIP 0-03-01519 was written to document problem. The system was operable without the operability of this support. The problems found were not service induced; therefore9 additional examinations are not required per paragraph -2430 of Code Case N-491. Work Order 98589202 was written to correct problems.

F01.031.015 3-13-SR2 13 01/15/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.031.025 2-WL-1A0-A-K032 WL 11/25/2002 CLR N N F01 .032.00 1 3-01 A-1-7 OA 03/27/2003 REC N N Discrepancies that were found were reviewed by CiVIl engineering and the support was found to be acceptable for service.

F01.032.002 3-01A-H6 01A 01/21/2003 REC N N Discrepancies that were found were reviewed by civil engineering

(. DUKE ENERt-s;ORPORATION QUALITY ASSURANCE TECHNICAL SERVICES C.

In-Service Inspection Database Management System Run D EOC 20 Pop 13 Oconee 3 InservIce Inspection Listing Plant: Oconee 3 08/18/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER .qv~TEm imqp DATE INSP STATUS INSP LIMITED GEI D REF RFR COMMENTS

... and the support was found to be acceptable for service. Work Order # 98576669 was written to correct problems.

F01.032.003 3-03-H48 03 01/06/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.032.004 3-03-H49 03 01/15/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.032.009 3-03A-SR101PO 03A 01/09/2003 CLR N N F01.032.011 3-07A-H15 07A 01/08/2003 REC N N Discrepancies that were found were reviewed by chnl engineering and the support was found to be acceptable for service.

F01.032.013 3-08-Hi 08 01/21/2003 CLR N F01.040.001 3-RPV-WR36 06/06/2003 CLR N F01.040.015 3-SF-PU-A 01/20/2003 CLR N F01.040.016 3-SF-COOLER-A 03/13/2003 REC N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.040.026 3-RC-SR-FILTER 12/02/2002 CLR N F01.040.033 3-CON-BOR-TANK 03/04/2003 REC N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.040.034 3-PEN-ROOM-FLTR 12102/2002 CLR N F01.040.035 3-PEN-ROOM-FAN 12/02/2002 CLR N F01.040.037 3-ESVP-3A 12/16/2002 CLR N F01.050.001 3-03-SR3 03 01/08/2003 CLR N F01.050.002 3-NPS-03-H28 03A 05/09/2003 CLR N F01.050.003 3-53-H3 53A 05/10/2003 REC N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98545655 was written to correct problems.

F01.050.004 3-56-HI0 56 05/12/2003 CLR N F01.050.005 3-50-H-12 50 05/05/2003 CLR N F01.050.006 3-50-Hi A 50 05/05/2003 CLR N F01.050.007 3-50-H2A 50 05/05/2003 CLR N F01.050.008 3-50-H3A 50 05/05/2003 CLR N F01.050.009 3-51A-H2A 51A 05/05/2003 CLR N F01.050.010 3-03-H6B 03 05/05/2003 CLR N F01.050.011 3-03-H7A 03 05/05/2003 CLR N F01.050.012 3-50-Hi0 50 05/05/2003 CLR N F01.050.013 3-50-Hi 1 50 05/05/2003 REC N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.014 3-50-1-18 50 05/01/2003 CLR N N

DUKE ENERC CORPORATION C

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Page 14 Oconee 3 Inservice Inspection Listing Plant: Oconee 3 08/18/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS F01.050.015 3-50-H9 50 05/01/2003 CLR N N F01.050.016 3-50-H1 50 05/01/2003 CLR N N F01.050.017 3-50-H3 50 05/01/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.019 3-57-Hi 5 57 05101/2003 CLR N N F01.050.020 3-57-H 16 57 05/01/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.021 3-57-H-17 57 05/01/2003 CLR N N F01.050.022 3-57-H20 57 05101/2003 CLR N N F01.050.023 3-57-H21 57 05/01/2003 CLR N N F01.050.024 3-57-H23 57 05/01/2003 CLR N N F01.050.025 3-57-H25 57 05/01/2003 CLR N N F01.050.026 3-57-H7 57 05101/2003 CLR N N F01.050.027 3-57-H9 57 05/01/2003 CLR N N F01.050.028 3-01A-1H2A 01A 05/05/2003 CLR N N F01.050.029 3-01A-H2B 01A 05/06/2003 REC N N Discrepancies that were found were reviewed by civii engineering and the support was found to be acceptable for service. Work Order # 98598039 was written to correct problems.

F01.050.030 3-01A-H8A 01A 05/05/2003 CLR N N F01.050.031 3-01A-H8B 01A 05/05/2003 CLR N N F01.050.032 3-03A-SR103PO 03A 01/15/2003 CLR N N F01.050.033 3-03A-SR104PO 03A 01/15/2003 CLR N N F01.050.034 3-03A-SR100PO 03A 01/08/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98456650 was written to correct problems.

F01.050.035 3-03A-SR1 01 PO 03A 01/09/2003 CLR N N F01.050.036 3-03A-SR102PO 03A 01/15/2003 CLR N N F01.050.037 3-56-SR107 56 01/21/2003 CLR N N F01.050.038 3-56-SR109 56 01/21/2003 CLR N N F01.050.039 3-56-SR1 12 56 01/21/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98587934 was written to correct problems.

F01.050.040 3-56-SR1 16 56 01/21/2003 CLR N N F01.050.041 3-56-SR119 56 01/21/2003 CLR N N F01.050.042 3-51A-SR14 51A 12/02/2002 CLR N N F01.050.045 3-01A-R9 01A 01/15/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceotable for service.

( DUKE ENERGCORPORATION

(

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Oconee 3 Inservice InspectIon Llsting Page 15 Plant: Oconee 3 08/13203 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DA,TE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS F01.050.046 3-53B-SR22 53B 11/25/2()02 CLR -- N N F01.050.047 3-54A-SR22 54A 11/25/2(002 CLR -.. N N F01.050.048 3-54A-SR7 54A 11/25/2(002 CLR - N N F01.050.049 3-54A-SR14 54A 02/20/2(003 CLR -- N N F01.050.050 3-01A-R4 01A 01/15/2(003 REC -.. N N Discrepancies that were found were reviewed by civii engineering and the support was found to be acceptable for service.

F01.050.051 3-01A-R8 01A 01/1512003 CLR N N F01.050.053 3-01A-RI 1 01A 12/09/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98588304 was written to correct problems.

F01.050.054 3-01A-R4 01A 12109/2002 CLR N N F01.050.055 3-531-SR32 53B 12/02/2002 CLR N N F01.050.056 3-53B-SR33 53B 12/02/2002 CLR N N F01.050.057 3-53B-SR38 53B 11/25/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98588402 was written to correct problems.

F01.050.058 3-53B-SR39 53B 11/25/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.059 3-13-SRI 13 12/09/2002 CLR N N F01.050.060 3-13-SR3 13 12/09/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.061 3-13-SR4 13 12/09/2002 CLR N N F01.050.062 3-07A-DE027 07A 01/15/2003 CLR N N F01.050.063 3-03-DE001 03 01/15/2003 CLR N N F01.050.064 3-03-SR1 03 01/08/2003 CLR N N F01.050.065 3-03-SR10 03 01/15/2003 CLR N N F01.050.066 3-03-SR 11 03 01/15/2003 CLR N N F01.050.067 3-03-SR2 03 01/08/2003 CLR N N F01.050.068 3-03A-DE054 03A 01/08/2003 CLR N N F01.050.070 3-03A-DE053 03A 11/25/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.071 3-53B-DE013 53B 11/25/2002 CLR N N F01.050.072 3-56-DEOO5 56 01/21/2003 CLR N N F01.050.073 3-56-DE007 56 01/21/2003 CLR N N F01.050.074 3-53B-DE008 53B 12/09/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.075 3-56-DE008 56 1210212002 CLR N N

C DUKE ENERG"ORPORATION C

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Page 16 Oconee 3 Inservice Inspection Listing Plant: Oconee 3 08/18/2003 Interval 3 Outage 6 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMiTED GEO REF RFR COMMENTS F01.050.076 3-03-H6034 03A 05/05/2003 CLR N N F01.050.077 3-03-H6036 03A 05/05/2003 CLR N N F01.050.078 3-03-H6038 03A 05/01/2003 CLR N N f01.050.079 3-03-H6187 03A 05/0512003 CLR N N F01.050.080 3-57-NWIZ 57 05/05/2003 CLR N N F01.050.081 3-50-1-17 50 05/01/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98598039 was written to correct problems.

F01.050.082 3-03A-H204 03A 01/21/2003 CLR N N i01.050.083 3-03A-SR33 03A 01/08/2003 CLR N N F01.050.084 3-51A-H308 51A 02/20/2003 CLR N N F01.050.085 3-51A-H309 51A 02/20/2003 CLR N N F01.050.086 3-51A-H294 51A 12i09/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98593512 was written to corrct problems.

F01.050.087 3-51A-H304 51A 02/20/2003 REC N N Discrepancies that were found were reviewed by ctvil engineering and the support was found to be acceptable for servIce.

F01.050.088 3-51A-H318 51A 12/02/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service. Work Order # 98545694 was written to correct problems.

F01.050.089 3-01A-R13 01A 01/15/2003 CLR N N F01.050.090 3-53B-SR46 53B 12/12/2002 CLR N N F01.050.091 3-54A-R1000 54A 12/02/2002 CLR N N F01.050.092 3-54A-R1001 54A 11/25/2002 CLR N N F01.050.093 3-54A-SR23 54A 12/02/2002 CLR N N F01.050.094 3-51 B-H62 51B 05/08/2003 CLR N N F01.050.095 3-54A-SR12 54A 02/20/2003 CLR N N F01.050.096 3-01A-R1O 01A 11/25/2002 CLR N N F01.050.097 3-01A-R6 01A 12/09/2002 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.098 3-01A-R9 01A 01/06/2003 CLR N N F01.050.099 3-O01A-R3 01A 01/1512003 CLR N N F01.050.100 3-07A-H70 07A 01/15/2003 CLR N N F01.050.101 3-07A-H71 07A 01/15/2003 CLR N N F01.050.102 3-07A-H72 07A 01/15/2003 CLR N N F01.050.103 3-07A-H74 07A 01/15/2003 CLR N N F01.050.104 3-07A-DE031 07A 1V02/2002 CLR N N

DUKE ENERG ' CORPORATION C:

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Page 17 Oconee 3 Inservice Inspection Listing Plant: Oconee 3 08118/2003 Interval 3 Outage 6 ITFM NIUMRFR In NU)MRFR SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS F01.050.105 3-13-DE002 13 01/21/2003 CLR N N F01.050.106 3-53B-SR31 53B 12/02/2002 CLR N N F01.050.107 3-50-RCPM-3A1-SS1 50 05/05/2003 CLR N N F01.050.108 3-50-RCPM-3A1-SS2 50 05/05/2003 CLR N N F01.050.109 3-50-RCPM-3A1-SS3 50 05/05/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.110 3-50-RCPM-3A2-SS1 50 05/05/2003 CLR N N F01.050.111 3-50-RCPM-3A2-SS2 50 05/05/2003 REC N N Discrepancies that were found were reviewed by civil engineering and the support was found to be acceptable for service.

F01.050.1 12 3-50-RCPM-3A2-SS3 50 05/05/2003 CLR N N F01.050.113 3-50-RCPM-3B1-SS1 50 05101/2003 CLR N N F01.050.114 3-50-RCPM-3B1-SS2 50 05/01/2003 CLR F01.050.115 3-50-ACPM-31 -SS3 50 05/01/2003 CLR F01.050.116 3-50-RCPM-3B2-SS1 50 05/01/2003 CLR F01.050.117 3-50-RCPM-3B2-SS2 50 05/01/2003 CLR F01.050.118 3-50-RCPM-3B2-SS3 50 05/01/2003 CLR F01.050.119 3-01A-R6 01A 04/30/2003 CLR F01.050.120 3-01A-R7 01A 12/16/2002 CLR G08.001.001 3PZR-WP63-1 50 05/06/2003 CLR G08.001.002 3PZR-WP63-2 50 05/06/2003 CLR G08.001.003 3PZR-WP63-3 50 05/06/2003 CLR G08.001.004 3PZR-WP63-4 50 05/15/2003 CLR G08.001.005 3PZR-WP63-5 50 05/15/2003 CLR G08.001.006 3PZR-WP63-6 50 05/15/2003 CLR G08.001.007 3PZR-WP63-7 50 05/06/2003 CLR G09.001.008 3-53B-37-1 53B 01/27/2003 CLR G09.001.009 3LP-181-29 536 01/27/2003 CLR G09.001.010 3-53B-37-35 53B 01/27/2003 CLR G09.001.013 3-53B-44-14 53B 05/18/2003 CLR G09.001.019 3-53B-50-8 53B 01/23/2003 CLR G09.001.020 3-53B-51-19 53B 01/23/2003 CLR G09.001.025 3-54A-11-17 54A 01/15/2003 CLR G09.001.027 3-54A-1 1-5 54A 01/15/2003 CLR G09.001.030 3-54A-9-32 54A 01/20/2003 CLR G09.001.032 3SF-1i18-57 56 05/09/2003 CLR G09.001.034 3-51 B-30-5 51B 05/13/2003 CLR G10.001 .OA I.-PIA9.Q .Sfl ARIMM7MAfl c0

DUKE ENERGQORPORATION

(.

QUALITY ASSURANCE TECHNICAL SERVICES In-Service Inspection Database Management System Run D EOC 20 Page 18 Oconee 3 Inservice Inspection Listing Plant: Oconee 3 Interval 3 Outage 6 08/18/2003 ITEM NUMBER ID NUMBER SYSTEM INSP DATE INSP STATUS INSP LIMITED GEO REF RFR COMMENTS G10.001.009 3-PIB1-11 50 05106/2003 CLR - N N G11.001.001 3RCP-3A2 50 05/12/2003 CLR - N N G11.001.002 3RCP-3B1 50 05/12/2003 CLR N N G12.001.005 3-51 B-31 25 51B 05/13/2003 CLR N N G12.001.011 3-51 B-41 -31 51B 01/23/2003 CLR N N G12.001.016 3-51 B-57-24A 51B 01/21/2003 CLR N N

4.1 Reoortable Indications EOC 20 (Outage 6) had one reportable item PIP 0-03-01519 was written to document a problem found during VT-3 inspection of hanger 3-04A-SR3 (Item Number (F101.031.011). There were recordable Indications found during VT-3 examination of hanger 3-04A-SR3. The indications were reviewed by civil engineering and the support was found to be unacceptable for service.

4.2 Corrective Action Corrective action is action taken to resolve flaws and relevant conditions, including supplemental examinations, analytical evaluations, repair / replacement activities, and corrective measures. There were two corrective actions for the examinations associated with this report period.

PIP 0-03-01519 was written to document a problem found during VT-3 inspection of hanger 3-04A-SR3 (Item Number (FO1.031.011). The indications found during the VT-3 examination were reviewed by civil engineering and the support was found to be unacceptable for service. The indications were not service induced; therefore, there are no additional sample examinations required and there will not be any surveillance inspections required. Work Order # 98589202 was written to correct problems.

PIP 0-03-03262 was written to document a problem found on hanger 54B-02477-H1 5A. This hanger is part of a gang hanger that is associated with hanger 3-144B-H22A (Item Number F01.021.006). The problems for this support were discovered while performing a VT-3 exam on item F01.021.006. The indications found during the VT-3 examination were reviewed by civil engineering and the support was found to be unacceptable for service. The indications were not service induced nor were they on the support requiring the code examination; therefore, there are no additional sample examinations required and there will not be any surveillance inspections required. The Support weld deficiencies were repaired under Work Order # 98279258 and the rust problem will be corrected under Work Order # 98279258.

4.3 Corrective Measures Corrective measures are actions (such as maintenance) taken to resolve relevant conditions, but not including supplemental examinations, analytical evaluations, and repair / replacement activities. Any corrective measures performed for examinations associated with this report period will be shown on the examination data sheets which are on file at the Duke Energy Corporate Office in Charlotte, North Carolina.

EOC 20 Refueling Outage Report Page 2 of 4 Oconee Unit 3 Revision 0 Section 4 August 18, 2003

4.4 Limited Examinations (coverage and scans)

Coverage Limitations (i.e., 90% or less of the required examination coverage obtained) identified for examinations associated with this report period are shown below.

Scanning Limitations (i.e., the number of scans required of weld volume in all four directions could not be performed.)

A Request for Relief will be submitted to seek NRC acceptance of the limited coverage and/or scanning limitations. Refer to Subsection 1.3 for additional information.

Item Number Reauest for Relief Serial Number B02.011.002 03-005 B02.012.002 03-005 B02.040.001 03-005 B09.011.023 03-005 B09.011.050 03-005 B09.011.051 03-005 C01.010.001 97-01 C01.010.002 97-01 C05.01 1.001 03-005 C05.011.005 03-005 C05.021.016 03-005 C05.021.021 03-005 C05.021.035 03-005 C05.021.044 03-005 C05.021.056 03-005 EOC 20 Refueling Outage Report Page 3 of 4 Oconee Unit 3 Revision 0 Section 4 August 18, 2003

Item Number Request for Relief SerialNumber C05.021.066 03-005 C05.021.067 03-005 C05.021.090 03-005 C05.021.095 03-005 C05.021.110 03-005 C05.051.020 03-005 EOC 20 Refueling Outage Report Page 4 of 4 Oconee Unit 3 Revision 0 Section 4 August 18, 2003

5.0 Owner's Report for Reoalr and Replacement Activities As required by the applicable code, records of Class 1 and Class 2 Repair and Replacement work is included on NIS-2 forms in this section.

Due to station processing and approval time frames, three categories of repair and replacement documentation exist for: 1) work performed during a prior refueling cycle; 2) work performed during the current refueling cycle; and 3) work completed but documentation not yet reviewed and approved.

There were 4 work orders for category 1 repair and replacement documentation for this reporting period. Work Orders 98373454-60, 98373454-54, 98373454, and 98362574 had work completed prior to 12-14-01 and copies of the NIS-2 forms are included in this report.

Category 2 had 54 NIS-2 forms for work orders completed during this reporting period. Copies of the NIS-2 forms are included in this section of the report.

Category 3 items will be submitted in a future report. PIP # 0-03-04958 and PIP #

0-03-05164 were written to document the work orders that are category 3 items.

The individual work request documents and manufacturers' data reports are on file at Oconee Nuclear Station.

5.1 Class I and 2 Preservice Examinations As required by the applicable code, Preservice Inspection (PSI) Examinations were performed on ISI Class 1 and ISI Class 2 items during this report period.

PSI Examination data for items listed below is on file in the Oconee Nuclear Station QA Vault.

Work Orders Weld ISI Type of Comments Numbers Class Inspection 98430082 3LP-0199-14Za 2 PT 98449229 3HP-242-47 1 PT/UT 98449229 3RC-0212-52 -1 PT/UT 98448761 3RC-0211-64 1 PT/UT 98448761 3HP-0241 -48 1 PT/UT 98373454 3MS-0099-45 2 MT/UT 98373454 3MS-0099-47 2 MT/UT 98373454 3MS-01 16-39 2 MT/UT 98373454 3MS-01 16-40 2 MT/UT 98373454 3MS-01 17-36 2 MT/UT 98373454 3MS-0 17-V37 2 PT/RT EOC 20 Refueling Outage Report Page 1 of 2 Oconee Unit 3 Revision 0 Section 5 August 18, 2003

Work Orders Weld Isl Type of Comments Numbers

.______ _ Class Inspection 98373454 3MS-01 18-23 2 MT/UT 98373454 3MS-01 19-21 2 MT/UT 98373454 3MS-01 19-V22 2 PT/RT 98373454 3MS-0120-32 2 MT/UT 98373454 3MS-0120-33 2 MT/UT _

98373454 3MS-0121-61 2 MT/UT 98373454 3MS-0122-24 2 MT/UT _

98595583 3MS-0087-74 2 MT/UT EOC 20 Refueling Outage Report Page 2 of 2 Oconee Unit 3 Revision 0 Section 5 August 18, 2003

(C FORM ts12 OWNER'S RE' As Required By The ProvIsIons

( s REPAIRS OR REPLACEMENTS C t he ASME Code Section M,

1. Owner Duke Power Copn Addre 285 Church StI Charlotte, NC 28201=1

2. Plant Oconee Nudcear Stan SheeLclo /

Address 7800 Rochester Roy,. 8fEeca4 8C.. 29672 I 2a. Uni 02 0 Shared (spec Unis)

3. Work Performed By Duke Power Company 3a. WorkOrder 02? g5f6Q & ?6/

0 Repair Organbztlon Job #

Address 28 S. Church Street, Chatnott, NC 28M01.1008 Type Code Symbol Stamp WA Authortn No. WA Expirton Date IVA 3b. NSM or MM # _ _ _ _ _

4. Identmfiction of System k 14Q0

5. (a)Applicable Conatnclon C AZ.Lr ISA MEd -on___d Ackfenft W-1-9 c~ds Cases (b)Applcable Edion of Secion XUtlzed for Repalre or Replacments 198,'NoAddnda (199" Z through' 1992 Addenda for Class MC and CC and their supports.)

6. Identfcaon of Component Repaired or Repacd and Rpaement Components:

Column I coumn2 Column 2 Column 4 Cokimm a M6 columnI Coft m Name of Component Name do ucr Bard OtherR~e Smp Numbeerllcti n R plce mfent (ye or no)

A 6 ,_ A) 59 9'

_________ _ O  ; f I .I . l / - l l 0C lyes

. . .  :- 1:1 Rop~~~~~~~~~~d OE No

. -  : : 0Re placdmnw 0 Yes C ,; -  ! ' , ' r 0 _ s' _ B 3 g _O No D Repalred ONo F OReptaced 0 Yes E_ _ _ _ _ _ _: _ ___-.0 _ N F .; ,_.  : I = < g R L O 1*~~~~~~~~~~~~~~~~~

Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size is 8112 in: x 11 In. (2) InformatIon In items 1 through 6 on this report Is Included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of thi.s form.

7. Description of WorkIYDy 4Al5/ 3 ' TiS -. g- ,/a /

a Test Conducted: 0l Hdtostatic 0 Pneumatic o Nominal Operating Pressure 0 Other ,U Exempt Pressure ___psig Test Temp. OF Pressure _ _ psig Test Temp. *F Pressure _ _ psIg TestTemp. OF 9.Remarks (Applicable Manufacturers Dfta Records to be Attached)

CERTIFICATE OF COMPLIANCE - I We ctf tat the stements made In the report are correct and this repair or replacement conforms to the rule of the ASME Code,Section X.

Type Code Symbo Stamp WA CeOtMMlca oWA Expiration Date WA Sian 9t geDesignee, Ia DA-0 5 CERTIFICATE OF INSERVICE INSPECTION thee undersigned, holding a valld commisswon issued by the National Board of oBear and Pressure Vessle Inspectors and the State or Providence of AGc*,w- e.i and employed by dlld 1'

___________have Inspected the components described inh Ownees Report during the period /oA,,6/

to £L&.  : 8and state that to the best of my knowledge and belief, the Owner-has performed examinations and taken correctie measures descrbed In this Ownes Report In accornlance with the requirements of the ASME Code, Section Xi.

By sigin this certinIcate%neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures descrbed In this Owner's RepocL Furthermore, neiter the tr5pO~tot nor his enpboyer shall be tlable In any manner for any personai lngiuy or property damage or a loss of any kInd arsing from or connzected with this inspection Commissions A/le/%4r 4A1W Dn Sgnature National Board, State. Providence and Endorsements Date -5A&'6.

Page 2 012

C I, FORM NIS.2 OWNERS REPO ,R REPAIRS OR REPLACEMENTS

As Required By The ProvlsTons Of The ASME Code Section XI C

1. Owner Duke Power CoMpany 1a. Date Address 528 S Church Street, Charlotte, NC 28201.1008 2.Plant Oconee Nuclear Stati o Shee L of /

Address 7800 Rodhester byq. Ildnecai SC. 29672 2a. Unit 1I 02g J3 OShared (Speeffyunt 3? W k Order #______2_ _/

3. Work Pertormed By bulte Power Comany Repair Oranization Job #

Address 628 S.Church Stree, Chealotte, NC 28O11006 Type Code Symbol Stamp WA Authortdon No WA Expiraton Date WA 3b. NSM or MM# II -

4. IdentifIaton of . 2) :

5. (a) Appcablze Constrion Code #Q _ 3/.7 1g O 4 Addeandal. roda r-fenq (b) Appliable EditIon of Secton Xl Ulid for Repairs or Replacments 1989, No Addenda ---

throughb,1992 Addenda for Class MC and CC and their pports.)

6. Identffeafton Of Co n Repird or Rep nd Replacemen Component col"mnI  : COI.CMS Mi2 WotM4 .caftm Col Oo0uMM7 ftkum a N a me ~~~~ Natio nal Repulre d~~~~~~~~

ASMECode Serial Number IdentIfcatllon l BRe um acd 0 l Stame

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Replace~~~~~~~~~~-

81mnent (ye or no)

Of Foe opc "00v ~~~~~~~~~~~~~~~Repatred A V/rpl /9 0 PReplaced FJ/s 99C A r~

.~i~ _ _ _ _ _ _ _ _ _ _ _ _ _ . O o o t 0e~

Y es gO R . d O0 No Yes B 7epatr_

-  :  : . ,. D _O DRepaired ONo Replaced o _O. . - g Repaired  ! O No C IO Replace 0 Yes

_ + . , O0 Replaced O Yes O3Repalred 1 No

- _ __ __ __ _ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - ~ ~~1 o3 30 Replaced y es Page Ilof 2

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size Is 81/2 In. x 11 In. (2) Information In items 1 through 6 on this report Is Included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work k 4c C)A/ Ip I p

& Test Conducted 0 Hydtostatic 0 Pneumatic 0 Nominal Operating Pressure 0 Other Jo Exempt Pressure _ __ psig Test Temp. OF Pressure _ _ psig Test Temp. OF Pressure __ psig Test Temp. OF

9. Remarks i

(Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We cerify that the statements made In the report are correct and this repair or replacement conforms to Me rules of the ASME Code, Section Xi.

Type Code Symbol Stamp WA Expiration Date WA a

wv . ., ,,, ,,

'(kn-rorownee's Deslgneoe,~i X , z . . .,, ,, o . ,_

_ Da0 C. S 03AIv

-Ao -

CERTIFICATE OF INSERVICE INSPECTION I the wudersigned. hokflgr a valid conmi ed by the Natonal Board of BoBer and 0ruaYesse Inspectors and the State or Providence of a!a and employed by7

- have Inspected the components descrbed Inthis Owners Report during the period G- I.

to/Q$03  : and state that to the best of my knowledge and belef, the Owner has performed examinaffons and taen corrective measures described Inthis Owner's Report Inacconlance with the requirements of the ASME Code, CI Section Xl.

By s lgnthis certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concemngt the examinations and corrective measures described hI this Owner's Report Furthermore, neither the Inspectot nor hlS employer shall be liable hI any manner for any personal Injury or property damage or a loss of any kind arising fxro or connected with this Inspection.

Commissions __ __ _ __ __ _

National Board. State, Providence and Endorsements Date-Lzo~

Page 2 of 2

( FORM NIS-2 OWNERS REPORT WR OR REPLACEMENTS REPAIRS Ci

-As Required By The Provistons Of The ASME Code Sectlon Xl Ia. Date

1. Owner Duke Power Company la. Date ~

Address 528 S. Church Stret, Charlotte, NC 2821t1006 SheaLof /

2. Plant Oconee NugearSt on Address 7800 Rochester fty. fneeaj, 8.C. 29672 2a. Unit 0I 02 Ps Oshe t ecffynd(P s)

3. Work Performed By Duke Power Company 3a WorkOrder# %5>/6'//-/ 5S Rep* Organiatlon Job #

Address M2O8 Church Street, Charlotte, NC 28201.1008 1 Code Symbol Stamp WA Auth Tpe on No. WA ExpBotion Date WA 3b. NSMe63. -

/5-*iX6

4. Idenicatlon of System, C4A iYO c)/) cha_>

5. (a) Appneab:Constructionst 71 1 9Edtd AV Addenda, CodeCases Ca/

(b) AppeEdlonofSectonXIWzdfReparorRepla 8=iNoAdderid (1992 through 1992 Addenda for Class MC and I .

CC and their supports.)

6. Idencaton tComponens Repired Rep and lReacmet Componlents :_.: _

Ooltumh C ;.;0 1 Ooh rnn2 .- CrmM3 C;'ufnn4 COMM 0-do Cotlmm7 Cohflma1

_ . _ ,.,. ;. 7 ., , Ntflorill .,~~~~~~~N ot m tii nar R~~~~~~~~~al~~ld, R e ,m~ASME Code Name of Component Nme lyanufactur of  : SMZI N board menffoB Yer ep S ~ ~ r lN aulmb~er _ _ _ _ _ _ _ _ _ _ Replac 1em en ( yes o r no)

ORepaired ONo A _ _ _ _ _ _ _ _ __ _ _ __ __ __ __ _ _ __ _

0 0

A 0  ; -

8

~0 R e p l c e m e n U Replaced Yes D __ _ _ _ - Oe ONO No_

E Repaired 0 ta8 F :.

_______  :. . -: = .'_  ; _- °0~~~~~~~~~~~~~~~~~11 Replacement

., 4 .:. 0 NoI Yes ORepafed ONo1 F O~~~~~~~~~~~~~~~~~~~~~~~~~

_ _ __ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 01Re pla c men t E l_ _Y e s Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 In. (2) Information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work 3/' j_-5 _ A4 _ , ?5%

576o)//

8. Test Conducted. 0 Hydlostatlc O Pneumatic O Nominal Operating Pressure 0 Other 4Exempt Pressure _ _ psig Test Temp. OF Pressure ___psig TestTemp. *F Pressure _ __psig Test Temp. OF

9. Remarks AO!

I (Applicable Marntactrs Data Records to be Attached)

I ,>

CERTIFICATE OF COMPLIANCEA We cert at the statements made Inthe report are correct and this repair or replacement conforms to the rules of the ASME Code,Section X.

)pe Code Symbol Stamp WA Expration Date WA 8km ta~; &7 UWA-ot2wd03 Date

\ / OwerbrOMW i Designee, l-Ie' CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid coMMIsbo ssued bt the National Board of Boner and P sesre V Inspectors and the State or Providence of Niat t and employed by (T

-__________ have Inspected the components described in ts Ownees Report during the period 6kaL to %o-2'L: and state tuat to the best of my nowledge and bellef, the Owner has performed examinadons and taken corrective measures described In this Owner's Report In accortanco with the requirements of the ASME Code, Section Xi.

BY signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied.

concerning the examinations and corrective measures described In this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kInd arising from or connected with this Inspection.

Commissions National Board, State, Providence and Endorseme nts Date 7- 7-3 Page 2 o02

C FORM NISQOWNERS REPORT FOR REPAIRS OR REPLACEMENTS

(

IAs eqieBy The Prey Of The ASME Code Secton x

1. Owner Duke PoweCompany la. Date &

Address 528S. Cuch Str Chotte NC 280.10 Shtil of /

2. Pant Owonee NucleartatiSo II Address 7800 Rochester- b. Sdnecaai 8.0C 29672 2a. Unit. Q2 Osharei (sPoc i)

Se,.h WorOrder # ay

3. Work Performed By Dute Power Copn Repair Oranization Job #

Address 528 Chturch S , Chaloe NC 28201100 Type Coda Symbol Stamp WA Auhtito on No. WA Epration Date WA Sb. NSM or MM# _ _, _ _-_f

4. Idenficaton of 3,.r ' .O

5. (a)Applicable Cotu!n C.7 iol.E Edio / Addenda, ___o Cases (b) Apliabe Eddon of SecdonX)a UzodforRepaior R Iem 198,NoAdd~nda C1992 through 1992 Addenda for Class MC and CC and thelvsu pports.)

6. Idenificaton of Compone? Repaid or Replaced d R Componnts

.clumni Oo~umn2 OohnmlS 4 cam a _otn COLO 7n Ol a_

_aCeu acu e :AS1 Oearterbl Year 2 Rl 1 'or Code Name of Component MNae of MaufatreBoardntfcetn Name_

_ _ _ _ _ _ _ _ ot _ _ _ _ _ __ __ Number

__e_ _

ul Re plcemnit( Sftmped eor no)

A 3.-6 --O- 5 /6AMft ~Replae

~~~~

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ' ORe l c me t0 y es C~~

D J~%. 0 , r ~ _~ .,  ; , QO e_i rEdE ,

° Repaired O ONo W50 Replaced C Red QJFS .. O0Replacement U2&=_W~~~~~~~O ep~rd 0 Yes N E O~~~~~~~~~~~~~~~~~~~~~~~~0ReplacedOo 0 Repa:red 0 No Q Rep~e

• O~~~~~~~~~~~~3Repaired 0No

__ __ ___ __ ___ ___ l _ __ _ ._ l__ -0l 0Replacem ent 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 112 In. x 11 In. (2) Information In Items 1 through 6 on this report Is Included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work e& gcI6 c /- llx c? Z2 g'441-,9"4- IA7,4 8 Test Conducted: 0 Hydtostatic 0 PneumatIc 0 Nominal Operating Pressure 0 Other ,1 Exempt Pressure _ __psig Test Temp. *F Pressure ____ psig Test Temp. *F Pressure psig

~~~~ est Temp. OF

9. Remarks /U/19 (Applicable Manufacturees Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We cerfy t the statements made In the report are correct and tfs repair or replacement conforms to the ues of the ASME Code, Secdon XI.

7yrpe Code Symbol Stamp WA I A. Expiraton Date WA

_________________________ Date CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valldix sud by the Naiona Board of Bogler andp VWure essel Inspectors and the State or Providence of nI and employed by f7 have Inspected the components described In fth Ownefs Report during the perlod 16-yL L-.

to 6-^ -an~dsiate that to the best of my knowledge and belief, the Owner has performed examinatios and taken corrective measures described In this Owner's Report In accorlance with te requirements of he ASME Code,Section XI By s lginthis certificate, neither the Inspector nor his employer makes any warranty, expred or Implied.

Concerning the examtnations and corrective measures described In ths Owners Report Furihermore, neither the r~SPO~tr nor his employer shall be liable In any manner for any personal Injury or property damage or a toss of any kind arising from or connected with this Inspction.

Commissons-t Slgnatur Natonal Board. 'State, Providence and Endorsewments DateeL -1.

( FORM NIS2 REPORT R9PA OR REPLACEMT A8 Required By The Provistons Of The ASME Code Seton  :

1. Ownr Duke Power Company I l~~a. Do"4ate .Q Address 52 S Church Stree, Cherotta, NC 28201-100B

2. Plant Oconee Ncear Station SheetLof L Addre 7800 Ro6hester rly*. Sfdeca S.C. 29672 2a. Unit 1I 0:2 O~ har3d.s ppt ecltr'; 51 a 3a. Work Order # &5,(~I/&/o2 /9

3. Work Performed By Duke Power Company: 0 Repar Organiation Job #

Addres 52 S. Church Street, Chamtot, NC 28M01.1006 Type Code Symbol Stamp WA Autotion No. WA Expaton Dae WA 3b. NSMo! /5p 0

4. Identcaon of ystemL CoRF Class___

5. (a)Applcae Constrhcton Codet iL 2 Efton..a Addenda, " J _ __ ___ ___ __ _ JUU A (b) Appce Edion ofSecton Xl Utd for Repas or RepacentsI989 NoAddenda (1992ftbrough 1992 Addenda for Class MC and CC and their supports.)

6. Identaton of Components Rear or Replced and Replcmnt Compone Colum ColumnS2.4 Colum.S3 Co COlumta Co 6 Cot u Wn Co umn sa Nationa Rpird ASM~Code fName of Component Name of a cturer Board Repace, o Stamped Ser i al wi t bedrentifi ati on ~R epl ace ent ( ye or no) 6/,(' 3'-5?6- ~~~~~~~~~~ Er No

~~Repalred A~ ~~ ~~~~~~~~~~~~~~~~~d!,0

~ ~ Replaced,

- - b 9 5 ____ I ___ __ _ /" -e

- 0/9 t 0 Ye

0. Repad O  :

c : y 7 7  : - ;f . :-S a g= X 3~O~epared No ORepaIrd ONO C D _ X _ _ _ _ _ _ _ _ _ _ ___O -

0. 7R<e^:placed

- O 0 NYeso Oaire~ edp No D .  :. O Rept Y Oaced

- -  : ___ ____________= - 0Re p(aJ~ redmn flac o 2 0 NYe Replacement yes

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size Is 8 112 In. x 11 In. (2) Information In items 1 through 6 on this report is Included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work NA Z& -1zx -?- 5 0-Z9 3'; y-(: j - 11

a. Test Conducted: 0 Hydiostatic 0 P'neumatic 0 Nominal Operating Pressure 0 Other OTExempt Pressure _ _ _ psig Test Temp.

Pressure _ _ _ psig Test Temp.

Pressure _ _ _ psIg Test Temp.

9. Remakcs (Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE ---i We coeY that the statements made In the report are correct and this repair or replacement conforms to the utes of the ASME Code,Section XI.

lope Code Symbol Stamp W/A colfit 9 No. WtA Expiration Date WA Date-NA190AV

<~~~o OftAers Deiiee.-Mfe CERTIFICATE OF INSERVICE INSPECTION 1.the undersigned, holding a valid cormsslonu National Board of Boiler and Myethe Vessel Inspectors and the State or Providence of and employed by have Inspected the components described In ts Owners Report during the period kkZ4 .

to ?- DE: and stat hat to the best of my knowledge and beWef, the Owner has performed examinations and taken corrective measures described in this Owners Report In accordance with tle requirements of the ASME Code,Section XI.

By sligg this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described Inthis Owneres Report. Furthermore, neither the inspector nor his employer shal be gable In any manner for any personal Injury or property damage or a loss of any kindarisg from or connected with this Inspection.

Commissions. ,rv(,/ /4 '*19/VJ:7 -

National Board, State. Providence and Endorseme ntsa Date 7- 7-3 Page 2 of 2

( FORM NS-2 OWNERS REPORTFOR OR ACEMENTS N

As RequIred By MTm the Proisons Of A8NI Cods Seomn M

. Owner Duke Power Company Address M2 S.Church Street, Charlott, NC 2821.1001 S$heet.J of /

Pant d Oconee Nuclear Station Addrms 7800 Vocbeste~r Hwy. 8fnecaj $.C. 29672 2a. Unhi OI 0Q 2 . , I(M3 1 O Shared (specfY .nft

38. Work Order # ti6 4 9-O /

3. Work Performed By Duke Power Company Addres 52 & Chtth Stre ChalOtt NC 28201100 Repar Orgnizaton Job # I

Type Code Symbol Stomp WA Auhotiation No. WA Exp8ron Dat WA 3b. NSMorMM# .. S _)1

4. IdenfcatIon of Syr $ 4 9/A?

5. (a) Appftlce Constncton 1. k iodez Addenda, !a= Code Cases (b) Apptabte Edl~on of Sedton Uflkzd MM for Repairs or Repament 198, No Addenda (1992 throigh 1992 Addenda for Class MC and CC and their, spports.)

6. Identfcon of Compes Re or Reptced nd Repemnt Cmpo

_ C ni olu m ~~C olu rnn2 Colu nS C tu m4 1colu mS 0.1 6 _ ..

Colum n? C0oum ns Name of Component Name of anu tutor

RSeria M Number National Boar Num ber _ _

Iden~tiutson uRe Reeptaied paa e"t(edoStSm Code e omr n od)

A R~c1N/ -'C-. / / 0RepalreR 2N B O~~~~~~~~~~~~~~~~~~~~~~~Rep 16 IM  : ::ORepahred ONo ONo

_ Z O 6- I ' ._ ,_ ._ _ '_ _ _ _ - Z P a 0 Yes .

0, RepairedO O n . . Yes F0 L __ __ __ __ __ __ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _.__

ORzeplaed 0

O__Re 0 O No Yes O0 cb No F

ORepaired O~~~~~~~~~~~~~~~~~~~~~~~~ 0N

_ _ __ __ __ __ __ _ _ _ _ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - Rena ce ment 0 Ye s Page 101f2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) sIze Is8 1/2 In. x 11 In. (2) InformatIon In items I through 6 on this report Is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description Of Work W -14 e 1K

8. Test Conducted: 0 Hydtostatc 0 Pneumatic O Nominal Operating Pressure O Other J£'Exempt Pressure _ __psig Test Temp. OF Pressure _ _ psig Test Temp. OF Pressure _ _ psig TestTemp. *F

9. Remarks

. 7 -

(Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We crify that Ute statements made In the report are correct and tfh repair or replacement conforms to the rules of the ASME Code, Section XL ype Code Symbol Stamp WA Expiration Date WA Date, /Z//03>6vs CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission Issued by te Naflo Board of BoBer and Pressure Vessel Inspectors and the State or Providence of1AJL'*J !5A4'*. and empwwyed by #3-4' have Inspected the components described In s Owners Report during the period s1%r/o?

tO /Zk/of  : and state that to e best of my knowledge and beltef, the Owner has perfomed examna and taken Corective measures described In this Owneres Report Inaccorlane with fe requirements of the ASME Code.

Section X0.

By signing this certificate, neither the Inspector nor his employer makes any warrant& expressed or Imptted.

conCernlng the examinations and corrective measures described In this Owner's Report Furtherrnore, neither the InSpector nor his employer shall be liable Inany manner for any personal Injury or property damage or a oss of any kind arising from or connected with this Inspection.

x.J., ...ju o on

• o 0 A i

4. /-040 I r r AI IV"*"

a n f l inspectors Signature National Board, State. Providence and Endorsemer Date / °

- a8Vb

(24 FORM NMQ OWNEWS R ORFO 2PAIR8 OR REPLACEMENTS

(

As RqUired By The Provtstons Of The ASME Code Seotn X

1. Ownrmr DuI P w CM pmny la. Dae L977 S Addess S.Chuc SteeCMt NO 28M21008 steatL of 1

2. Plant OconNee Nucear Station Address 7800 Rodbester y.Aldneca 8.C. 29672

. 2 .I .rn 2a. Unit 0 1 11 02' ' 1C13. QlSnam(Spe*n 3a. Work Oder# 7 966l?5?- /

3. Wotk Performd By Duke Power Company Reir Oranzatfon Job #

Addres 528 . Chrch Stt, Chrotte, NC 28M14006 Type Code Symbol Stamp WA AUoftalon No. WA Exption Date WA 3b. NSM or MM# -

4. Identiffeaton Of 8ystnmeM7C1____

5. (a) Applicabi. Construction CodeAzglZ 1 EdWonI.&t Addjnda,, A)/14: CoeCases (b) Appicable EdltiofnSectionl Uled forRepalrs or eR1e0m1ons89, NAddenft e1992 tbrou8 1992 Addenda for Class MC and CC and thelr L &pporte.)$

8.Identeafton of Coponens Repred o Replaced and Rp*Mt Co t .

con I r: 2 - CO.M 4 aftmen6 CoLe C0n CAM a Name of Component N et Nme, Of MUni ~~~~~Board O= ter BitStamped Re 1 o ASME Code

________ Number Identification B~ t Rpiasm ent yeses rorno a~reedp

~R No A DReplce A7 O Ye B .__  : . _ . = _ 0 e C--O_._Repalred OYes O No yes D-. .0. . =p;l- c8NM I 0 Yes

_B .. o OfleplacedO Repaired Ye N

C .~eptaced 0 Yes No F-O Reared OReplaced 0 No D

O1ea3ed0 Nos ONo

_ ~ ~ ~ ~ ._ _ _ _ _ _._ _ _ _ ..

_ _ _ _ _ _ _ ,, O__Rephecement 0 Yes Page I of 2

/

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8112 In. x 11 In. (2) Infornation In items 1 through 6 on this report is included on each sheet and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work 3- 5 h /5-4 -

8. Test Conducted: 0 Hydostatic 0 Pneumatic 0 Nominal Operating Pressure O] Other WgExempt Pressure _ _ _psig Test Temp. OF Pressure _ _ _ psig Test Temp.

Pressure pstg Test Temp.

9. Remarks A2/,

(Appllcabte Manufactaes Daft Records to be Attached)

CERTIFICATE OF COMPUANCE We certy that the statements made in the report are coect and this repair or replacement conforms to the unes of theASME Code. Section Xl.

Type Code Symbol Stamp MA Cfie ~ ~ p~ p o W A / Expkaton Date MA

/

n

~~ ~ L Y l l i i K ~ f f f A11LJ dq La4 Date M/C/CZ /? B3

- - "-.- - V-' Owffar br OfteraDeslgnMWe CERTIFICATE OF INSERVICE INSPECTION

t. te undersigned, hok"ing a valid comnmshIn the National Board of Boiler and Pressure by thssj sse inspectors and te State or Providence of J oiAdz and emploed by A. ff " r have Inspected the components descrd inthb Ownes Report durig the period 227- i tO 7 and state hat to the best of my know ledge and belief, the Owner has perforied examinations and taken corrective measures described In this Owners Report In accorlance with te requirements ol the ASME Code, Section MO.

By siging this certificate, neither the Inspector nor his employer makes any warranty. expressed or kIplied.

concerning the examinatons and corrective measures descred In this Owner's Repor. Furthermore, neither the insector nor his employer shall be liable In any manner for any peronal hJwy or property damage or a toss of any Icind arising from or connected with this Inspection.

Com°missions ; __ / 1?xr National Board. State, Providence and Endorsernei -its Dao_2: e7~

'00.

Order by st 3 401483 ( 314t (2-95)

FORM NIS-2 OWNER'S REPORT jR REPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASME Code Sectlon Xi

1. Owner Duke Power Company 1a. Date _-40/

Address 526 S. Church Street, Charlotte, NC 28201-1006 Sheet- i- of° o

2. Plant Oconee Nuclear Station Address P.O. Box 1439, Seneca, S.C. 29879 2a. Unit I 0n 0 2 3 El Shared (specify Units )

6 C0

3. Work Performed By Duke Power Company 3a. Work Order #°c 7.4G5

• Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp N/A Authorization No. N/A Expiration Date NIA 3 b~~ r M t W

?-T66 R

4. Identification of System.  ?.2 -29/( Class. s .

5. (a) Applicable Construction C ed (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda 19t 7 . Edition,i 7Z . Addenda, V/4# Code Cases

6. Identification of Components Repaired or Replaced and Replacement Components

. . ~~~~~~~~~~~~~~~~~~~~~~~~~~~o. Sr Col . 7 Coum Column 1 Column 2 Column 3 Column 4 Column 5 . Column 7 Column 8 ManufacturerNational ORepared, ASME Code Name of Component Name of Manufacturer Manufacturer Boardther IdenltlflC I tlond eat Reptawd o R p a e ,o Stmed A_________________ ___________________

Serial Numumeer _________ D_-/1______/ Built R eplacem ent (yest or m no) e

. Repaired O No A .J:: ) / -'(. P' LI ( R eplaced

. -14_ . __ .. Replacement D7 Repaired OlYes O No B Replaced 0~~~~~~~~~~~~~~~~~~~~~~~~~~~I

_ _ _ ___________ _ _ .__ _ _ _ _ _ _ _ _ _ _ _ _ _._ __ _ _ _______ __ __ _ __ __ __ _ _ EO__l Rep lace m e nt El Repaired E Replaced O

E YNoes

.___ __ _ __ _ ._ _ _ _ _ _ _ ._ _ .__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ . EO R e p lace m e n t E Yes

. Repaired O No F ElReplaced

_ __ _ __ __ _ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _I_

._ _ __ _ _ _ _ _ __ _ __ __ __ _ __ _ El.

O Re placem ent EY es El RepairedE o E ElReplaced

____ _______ _____ _ _______ ______ _______ _pElcRe lacemen El YYe ElRepaired ElNo F El~~~~~~~~~~~~~~~~~~~~~~~~

Replaced

__ _ __ __ _ _ __ __ __ _ __ __ __ _ _ _ __ _ _ _ _ __ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _E lRlaRela epE ceme t El YYe Page I of 2

Order by Stock Code 401463 Formn 401463 (2-95)

Form NIS-2 (Back)

/

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. 7 6) /YJ G  ?

7. Decrpto ofiJ* Jaz irt MY Wi CZ) /ti Aq

7. Description of Work IA-'V2O1~ (Ati1 Z 5 0 -' J4K4 Caqk)

8. Test Conducted: LI Hydrostatic D Pneumatic Li Nominal Operating Pressure L Other , Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certifiyt$ion No. MIA J Expiration Date NWA AinnA1/z

-:S-r-M=Vggs$WVUV-is-5/ t /t

> 'K!` Vw0"bV0Z+e?1s l3esig-iie-e-, T-itfie-1

£2. *rc DateC64 . I19 _

%-4p-CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of Ahe5JA 6 ArtL~l 8 and employed by HSBI and I Company of Hartford Connecticut have inspected the components described in this Owner's Report during the period /i-.-

to -rg-  ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

,,oonJ,

_UIIII, b ar t.

Izze-A

-e S 7 A

4Z 7-,-

o ..'

V lnsp66tor'stSignature National Board, State, Providence and Endorsements Date A- "A-, &____

Page 2 of 2 I

Order by 3 401483 FORM NIS-2 OWNER'S REPORTEiR REPAIRS OR REPLACEMENTS (. 01483 (2-96)

As Required By The Provisions Of The ASME Code Section Xi

1. Owner Duke Power Company 1a. Date a4-0 /

Address

2. Plant 526 S. Church Street, Charlotte, NC 28201-1006 Oconee Nuclear Station SheetLI of L Address P.O. Box 1439, Seneca, S.C. 29679 2a. Unit Di E2 El Shared (specify Units )

3a. Work Order # ?75

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA Authorization No. NIA Expiration Date NIA 3< xrMM # o 2 76A7

4. Identification of Systemf t ZATA?' r61/9) l C lass ___ __ __

5. (a) Applicable Construction Code onLLA 25 uIsI I9 Edition._ Addenda, __ _ _ _ _ Code Cases (b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989, No Addenda I

6. Identification of Components Repaired or Replaced and Replacement Components Cofumn 1 Column 2 Column 3 Column 4 Column 5 Col. 6 Column 7 Column 8 M anfacturer National Other Year Repaired, ASM E Code Name of Component Name of Manufacturer Ma Nufturer Board Other *0 ye RepWe!1 Or Serial NNumber identification Built R pa e ,o t me Number ______ _/ Replacement (yes or no)

. Repaired

.. (

.: El Replaced  :

E Yes I Replacem ent

.__I____ ____ _

/ _ i

~~~~~~~~~~~~~~~~

Repaired l N~~~~~~El B . Replaced No

_ .__ Replacem ent Yes Yes El Repaired E No C .l  : . OReplaced El Replacement E Yes El Repaired E No D El Replaced

_________ El Replacement [ Yes El Repaired E No E El Replaced N

_ _ _ _ _ _ _ _ _ __ __ _ __ _ .__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ _ _ __._ __I_ _ _.__ _ E l Rep lace ment El Y es F E Repaired El~~~~~~~~~~~~~~~~~~~~~~~

Replaced e No jN

_ _ __ _ _ __ __ _ _ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ E Rep la cem en t E l1Y e s Page I of 2

Order by Stock Code 401463 Formn 401463 (2-95)-

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work u tO / Wir 7 7-o Ae7sAJ6 ,/ 7A- 576 7R /o -', 7

8. Test Conducted: E Hydrostatic LI Pneumatic LI Nominal Operating Pressure LI Other A Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks (ApplIcable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE _

We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate fuhon' ati . N/A Expiration Date N/A Signe 6 IIt 6t//1=1111a41M

,Ownior-Owhdr'sffesignfee, W7EZ Title 5Ws Date Ac. 1 _

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of A1bJ4 /IRWS.Qd and employed by HSBI and I Company of Hartford Connecticut have inspected the components described in this Owner's Report during the period IoJ3-e/

to . co2-e; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

4F~aturk Commissions 1A C USSt4 A & r r spg r' ihz ~ignature National Board, State, Providence and Endorsements Dates -L I , 19- I Page 2 of 2

r1 FORM NIS-2 OWNERS REPORT RPAR OR REPLACMET RE C As Required By The Provi810sn Of The ASME Code Section Xl

1. owner Duke Power Commp Ia.Da t e_____

Addres 52 S.Cchurch Stre, Charlotte, NC 2801S.1008

2. Plant Ocon NuclearStton Sheet / ot l Address 7800 Rochester by. SEneea.; S.C. 29672 0/

2a. Unt Q1 2 3 O Shared(speeffyl: 5111 .) 3a. Work Order # C79.9c*724 MP Work Performed By Duke Power Company  :- Repair Organizaton Job #

Address 528 . Church Street, Ctlott, NC 28100 Type Code Symbol Stamp WA Authotlon No. WA ration Dae WA

,h,NRM"-", 7- I

/&6s3'_%

4. Identfcation of _ CwslaM ~

5. (a) Appcab Consbucon Code4&A.)6 MJl 19k2 Edrdffl.... . Addenda,_ vIJ/?0 --II ' Code Cases (b) Applicable Editon of Section Xl Utilizd for Repalrs or Reptacements 198, NoAddenda (1992 through 1092 Addenda for Class MC and CC and their support.) I

6. Idenftieon of Componenbt Repafred or Replatcd and R Veplacement ompnents

_btumni Ooumn 2 atUM 3 m4 001MMS O;Le - uMM7 CootfnSa Nat~~onal trod, ~ ASMECode Name of component Nmie ot anfu Board Yenr Y Stamped A _~~~~~~~~~Sf

_ _ _ _ _Ilub __ Number_dnfea _ // _-_ _:_ U Replacement (yes Or no)

BRepalred ONo A 'Wi'. O Replaced Y 0% Z

~ Z

, ~ '-

_ _ _ _ _ _ _ _ _ _ _I A 0 Q 0 Yes ORepare ONo B 0 Replaced Ye

_ _ _ _ _ _ _ _ _ _ _ _ ____ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 0 R eplac em e rnt _ _ _ _ _ _

ORepaired ONo 3O Replaced ORepair d D 0 Replaced~~~~~~~~~~~~~~D NN

_ __-_____:__._.- O Replacement 0 Yes DR -ared ONo E ; 7 0 0 0 0 -0 0 _ . - [I ~~~~~~~~~~~~13 Rep E Repla ced O~~~~~~~~~~~~~~~~~~~~~~~~ Ye L __ _ _ _ _ _ _ _ _ _

F I

__O_

- 0 R:p la c e m ORepflkred O~~~~~~~~~~~

epl aced e nt 0O1~~~~~~~~~~~~~~~

No _

Yeos Pape I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 In. x it In. (2) InformatIon In items 1 through 6 on this report Is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work 4jfYAf A/! .- 3t 64-C 43s5 6'(3'

8. Test Conductedc 0 Hydtostatic 0 Pneumatic 0 Nominal Operating Pressure 0 Other ,UEXempt Pressure _ _ psig Test Temp.

Pressure psig Test Temp.

Pressure _ _ _psig Test Temp.

9. Remarks (ApplIcable Manufacturees Data Records to be Attached)

CERTIFICATE OF COMPLIANCE -

We ceIf that the statements made In the report are correct and t repair or replacement conforms to the rules of the ASME Code, Section XA Type Code Symbol Stamp WA I~~~~o A% V ~ D~ Expiration Date NWA

. ,, .,, . . . .. - . l . ., .,

,,, .... _ , _ Date ^ f N l, U to~l g oeelymeres designee, ide CERTIFICATE OF INSERVICE INSPECTION 1,the underigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectom and the State or Providence of do10r71 C L.-o ' and employed by I/S oeC ,

have Inspected the components described In tis Owners Report during the period 9/A?%n toZ/IZ1A9 :and state at to the best of my knowledge and beief, the Owner has peormed examiaons and taken corrective measures described In this Ownees Report In accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any waffanty, expressed or implied.

concermnig the examinations and corrective measures described In this Owners Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arISng from or connected with this Inspection.

Inspectors Signature National Board, State, Providence and Endorsements I Date S Page 2 of 2

r- I (j FORM NIS-2 OWNER'S REPORT REPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASME Code Section X

1. Owner Duke Power Cowy Ia Date Address 28 S. Church Strt, Charlott, NC 28201-1006 Sheet / of /

2. Plant Ooonee Nuclear Station Address 7800 Rochester fty. Senecai S.C. 29672 2a. Unit 01 .02 S13 E3 toedecfsy'eit 3a. worlcOrder# 0 - 2 /6'

3. Work Peromed By Duke Pow CoMpany Repair Orginhzatlon Job #

Address 528 . Curch Stet, Charlotte, NC 282011008 1TPe Code Symbo Stm WA Auftoron No. WA xp on Date WA 3b. NSM or MM# I 6

4. Identfcaflon of " 1 ,4fi Ar E L.

5. (a) Appae Constuction Code ai-' &Z6 /. 7 l9& 2Edfon. Addenda, _ LI.q7 .Code Cases (b)Applicable Edifton of Section Xi Utizd for Repars or R op ts 1, No Addenda (l992 through t992 Addenda for Class MC and CC and their supports.)

6. Identfcaon of Components RePa orReptaced aNd Replace nt Components

_ _ Columni ~Cohlumn 2 CouM n3 Col mn4 cold en COLO6 Cof m n Col m a N ational ., ~ Repaired, ASMECode

_Nme of Componet Nsme of a S al Nu mberWd Boad enti caion BuitQ Reend ou Stamped

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Repl acement ( yesW or no)

CNo D _ _ __e_ __ i. _ _ - Repa m0 O es O Repafred O o B . _OReptaced

- 0 Replace et 0 Yes Rfepatred0 C O~~~~~~~~~~~~~~~~~~~~~~~

E:

> _ _ _ _ _ _ _ _ _ -0 OR epla ce en 0O~~~~~~~C R~~~~~~~~~~~~~~~~pleo; Y Noes ORepie No F_ _ _ _ _ _ _ __ = - 0Replaceme O3Replac d No ORepared 0ONo ORepl aced

__ _ __ __ __ __ _ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 0~~~~1 Re pla cemen1t 0 YO S Page 1of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 112 In. x 11 In. (2) Information In items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work ' 4' 3O/8 -'-2sV/e- ef$

8. Test Conducted: 0iHydiostaftc 0 Pneumatic 0 Nominal Operating Pressure 0 Other UExempt Pressure ___psig Test Temp. OF Pressure ___psig Test Temp. 'F Pressure ___psig Test Temp. .O*F

9. Remarks (Applicable Manufacturees Data Records to be Attached)

CERTIFICATE OF COMPUANCE -<

We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A WI Expiration Date WA

.. , ,. t 4i2,

.... ., . , , , - . DatePw/'

- > t Own&i-o OWfee's Designe iG% Wd CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holdng a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Providence of Gu" - and employed by -s" iA' ,

ca _ _

• rhave Inspected the components descried in ts Owner's Report during the period si1 / 3 to .X~.{2 Hand state that to the best of my knowledge and belief, te Owner has performed examinations and taken corrective measures described In this Owneres Report In accornance with the requirements of the ASME Code, Section Xi.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owners Report Furthermore, neither the On~pector nor his empoyer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions A/l./i/4 4 .iJz r i!nare National Board, State, Providence and Endorsements Date-~~A I'

Page 2 of 2

C FORM NS-2 OWNER'S REPOR( JR REPARS OR REPLACEMENTS f'

As Requlmd By The Provistons Of The ASME Code Scton Xl

1. Ownr Duke Powf Company la. Date 5 Address 28 . Chrch Ste, Charlotte, NO 28201.1006  :

2. Plant coonee Nuclear Station Addrs 7800 Rocdester Hwy. Sfeeai 8.C. 29672 2a. Unft 0I 0 2 96 C3 hered (specffUni 3a workd order # CI4 75 / 1/

3. Work Performed By Duke Power Comn Repair Organization Job #

Address 528 & Church Street, Chalotte NC 282.1006  :

Type Code Symbol Stamp WA Authodon No. WA EpirtIon Dat WA 3b. NSM . / tR

4. Idenficaotion of s .- ivA2M9 W_rt5&- chm. CZ

5. (a)Applicable Construction I Ed19n Add enda. - -

ontI

--- estqA (b) Appfltbc Editon of Section X) Utad for Repairs or Repces oAddnda (1992 throug1 1992 Addenda for I I Class MC and CC and their spport..)

,. Idenifcation of Components Repaire toReplaed and R Com"pots

_Ooi~tuwmn -  : flMn2 Cftmf3 . - COM 4 CIuMnS me cohmn 0olum s Manuf cture tI"to w~IO h rY a d AS =~Code Name of Component Nami of M faur Sedol u oad IdniOthon Bu-lte Rep or Stamped A ~ .~~d .P .% .  ? A~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~e o~rno)c;X/ /0aw Dior_ >  : 0 ..

; 5

- Repaired ONo 2 OO~~~~~~~~epai Repllced red 0~~~~~~~~

No oReplaced

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~~ 0 0 YNo

~ ~ORepaired

- . - e s D~

~ 0ReO~ pirlacedY eedpa Noe E _ ___ __ ___

__ _ __. _: - E.2l i li 0 W5 F Replaced Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in formn of lists, sketches, or drawings may be used, provided (1) size Is 8 112 In. x 11 In. (2) information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Descripton of Work /A 5 1TV4 02? ) ,L i/t7 Mt 2 46g V)Al 4 2 D

8. Test Conducted: 0 Hydtostatic 0 Pneumatic El Nominal Operating Pressure E Other IWTExernpt Pressure psig Test Temp. OF Pressure PSig Test Temp. *F Pressure psig TestTemp. *F

9. Remard As1,4 (Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE -\ "I, We cer hat the statmets made I the report are correct and this repair or replacement conforms to the rules of the ASME Code,Section X.

1ype Code Symbol Stamp NWA C 9 lVP,/

No. Expiration Date NA O O~ner 0{0wneraD e ant CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission Issued by te Natlonal Board of Boller and Pressure Vessel Inspectors and the State or Providence of Ag' &)L.eJX and employed by -'<i'4 <

have Inspected the components described In this Ownees Report during the period . 7/0 if tO .' 3 : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken correctve measures described Inthis Owner's Report In acconrance with the requirements of the ASME Code, Section Xi. IC By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concernng the examinations and corrective measures descrbed In this Owners Report Furthermore, neitr the nspector nor his employer shall be lWable In any manner for any personai Injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions A1/4111ZCI .

Inspector's Signature National Board. State, Providence and Endorsemei rUS Date s2 /

Page 2 of 2

( I FORM NIS-2 OWNER'S RPO IsJIR OR REPACEMENTS {

As Requfrod By The Provisions Of h ASME Code S x

1. Owner Duke Power Company Ila. Date4 K Addrss M28 .Church Street, Charfotte, NC 28201.1008

2. Plant Oconee Nuclear Staton sheet-/I-Of /

Addre 7800 Rochester Hwy. Sdfeca# B.C. 29672 ,. d 2a. Unit 02 - [f3 03shared secfI: 1

3. Work Peormed By Duke Power Company 3a Wofk #We 0e S 7 Repar Organization Job #

Addrss 528 5 ChU Street, Carlot NC 28t1008 Type Code Symbol Stamp WA Authoztdon No A Expirn Date WA 3b. NSM or MM# 1, oV/

4. Idenication off_

5. (a) AppWable Consbtucton lC 19.9 Adden (b)Applicable Edton of Sedon Xi Utilized for Repaim or Replacements 1989; No Addenda (1992 through 1992 Addenda for Class MC and cc and their supports.)

B. Idenrdeaon of Cmponents Repadred or Replaced and Replacement Componens a~~~~~~~~CU oo 0L -oma om Name of Component Name of e e Hatdna B Can R RepaIred, ASME Code

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Nwhbo I den cat i on lt Repl ace ment ( es Or n1 o)

BG,W 3O4A4o/ait ; O C-Re A

6 3~~~~~~~ O~~~~~ O >~~~~~~~

/0. 6 R epalre d O~~~~~

JM~~~~~~~~~~

Replacedye N

~~~~~~~~~~~~

A e<, :O~ w L  :. .i V aRep i d V. a.~~~~~~~~~~~~Rep Reolacement O No Yes 011geK2 OA( -

ed 0No D~~A (e RI :NA -ZZ = V/ = 0 8R-o3Replaced E _ _ _ _ _ _ _ _ _._ - _ _ < _ _ _ _ _ _ - @P aBD L 0 0 NY O~~~~~~~~~~~~~~~~~~~~~~ Ns D RepanredO

~~~~~~~~~~~~~~~~~~~0 Re~~~~h z Yes

~~~~ o QE~~ 2~ !~ . 0 Yes O Repired O No I . 0 Reptami.

Replaced 0 Yes Page 1of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size is 8 112 In. x 11 In. (2) Information In items 1 through 6 on this report Is Included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work XA /'0 "t CAI t C52 C3-05~-o -p6ZWk4 -1V6.6

8. Test Conducted: 0 Hydiostatic 0 Pneumatic 0 Nominal Operating Pressure 0 Other R Exempt Pressure _ _ psig Test Temp. _F Pressure f__psig Test Temp. OF Pressure ._ psig Test Temp. _ *F

9. Remarks (Applicable Manufacturees Data Records to be Attached)

CERTIFICATE OF COMPLIANCE -

We certy tat the statements made Inthe report are correct and this repair or replacement conforms to the rules of tet ASME Code, Section Xi.

Type Code Symbol Stamp WA Certifcat of,. WA Expiration Date WA Sign l wr d ~ ee ~ eineTn gno

~~D Date wMa <kiTa5 CERT1FICATE OF INSERVICE INSPECTON 1.the wdersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Providence of Gu6se £gv and employed by ,sA'r have Itspected the components descnbed In this Ownere's Report during the period sa4,At to 5r403  : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report In acconrance with the requirements of the ASME Code, Section Xi.

By signing this certificate, neither the Inspector nor his employer makes arn warranty, expressed or Implied, Conceming the examinations and corrective measures described In this Owners Report Furthermore. neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions Ak./IAXTA)dei!

Inspectors Signature National Board, State, Providence and Endorsements Date T/12&A3 Page 2 of 2

(7 FORM NIS-2 OWNE rS REPOR(. A RPAIRS OR REPLACEMENTS

. As Requtred By The Provfstons Of TheASME Code Seon X-

1. Ownr Due PoMer Compa: Ia. Date Address 528 SMChurch Stree, Caotta, NC 2 10 SheeL t /

2. Plant Oconee Nudear Station Address 7800 Rochester vhy. 8ftecai 8.C. 29672 2a. Unft Qi 02 ;93 I Sh red (spocfy"td _

.- woTr ero#'f74'3O 02 - C5

3. Work Perfrmwed By Duke Power Companu Recair Omaniaton Job #

Address 28 S. Chumh Street Calotte, NC 28M1.1008 Type Code Symo Stamp WA Authort on Not WA fEpiratlor 3b. NSM or MM# t/

4. IdentIfcatIon of systau C L) g 1 ) 01) Clas____ m oI7

5. (a) Applieable Conucdon C 19 io D Addenda, . / ___ ___ _ Code Cases (b) Alcble Edifton of Setn LU d for Rep" or Replacemenis 1t89:NoAddeda (1992 throogh 1992 Addenda for Class MC and CC and their supporte.)

6. IdentIfcton of Copones Rpar or Replcd and Repacemnt ttCoyonetb

-1= -. 2 CoftM 3Iumn4 .me .

Name of Component Nam of atNufactue r Boald Vflr Reep't t Stampeder A Boa~n~rd Replac ement or no)

(hes of E

:3 53&-5-O-:I-:' 0 RepOmd No FC 0 Replaced EJ C io I IA 21 0 Replaced

.RepaIe 1o D 0 Replaced~~~~~~~~~~~~~~~~~0 e 0 Rep e NO E Replae

~~~~~~~~~~~~~~~~~~~~~0

- _ _ _ _ _ _ _ _ _ _ _ _ - ~~~~~~~~~~~~~~~~~~~~

R0 y es ORepairmd N"oa,~~~~~0 E U Rephoed~~~~~~~~~~~~~~~~~~ ge 1 1

/

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size is 8 112 In. x 11 In. (2) Information In items 1 through 6 on this report Is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description ofworkADSi9 WA4) A f.&2 2 7 64 r p Al//) A 8 Test Conducted. 0 Hydtostatkc 0 Pneumatic 0 Nominal Operating Pressure C1 Other ),JExempt Pressure ___psig Test Temp.- OF Pressure _ _ psig Test Temp. _ _ _F Pressure _ _psig Test Temp. OF

9. Remarks (Applicable Manufactees Data Records to be Attached)

CERTIFICATE OF COMPLIANCE -V We cer at the statements made Inthe report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

7ape Code Symbol Stamp WA Ndf~cat WiA.

outgo. ar Expiration Date WA Date d / g24 S~~n ( / >s~~~~ Desli T" CERTIFICATE OF INSERVICE INSPECTION 1.the undersigned, holding a valid commission Issued by te National Board of Boller and Pressure Vessel Inspectors and the State or Providence of A/oomv GroovAA - and employed by -Ams e-!7

____________ have Inspected the components described In ts Owners Report during the period -f/Oz to sA/o3 and state that to the best of my knowledge and begef, the Owher has performed examinations and taken colrective measures descnbed inthis Owners Report In accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Irnpled, conceming the examinations and corrective measures described inthis Ownees ReporL Furthermore, neither the Inspector nor his employer shal be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions 4Jr1Ak lA)2XA?6 Inspector's Signature National Board, State, Providence and Endorsements Date(/&/o I

Page 2 of 2

.1*X X .

ASME Section Xl Manual FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLAiCEMENTS Section E ExhibIt A As Required By The Pr~01slo11 Of The ASME Code Section X . . .

1. Owner Address: la. Date ___z___°/

526 S. Church Street. Charlote NC 28201J1006 Sheet / ofl

2. Plant Address:

.ROO RWA Y, 1AC. S 29672 2a. Unit: 1 2 (p Shared (specify Units

3. Work Performed By: Duke Power Comosny 3a. Work Order #:

Address: 526 S.Church Street. Charlotte NC 28201-1008 RtpeOraZto1W Job Type Code Symbol Stamp: NA Authorization No. M Expiration Date: WA 3b. (ii r MM it: _ r s

4. (a) Identification of System: 4LV-N W// U -I; . 4. (b) Class of System: Zo

5. (a) Applicable Construction Code: Edition ______ Addenda, _ ____ A4 \ Code Cases (b) Applicable Edition of Section Xl Utilized for Repairs or Repiacements 1989. No Addenda (1992 through 1992 Addenda for Class MO and CC and their supports)

6. Identification of Componints Repaired or Replaced and Replacement Components:

LColumn 1 Column 2 Column 3 Column 4 Column 5 Cole Column 7 Column 8 Name ol Component Name d1Mlg. Mlg. Sedal No. National Board No. Oter Idmntliloaton Yesr BuUl Repaired, Replaced, or ASME Code Stamed

__________________________ ,_____________________ ___________ Replecement 4 orno)

A ..... - Repa~red, E 3 A.5-z4/7 C /^ - Replacement Yes B Y/ V , Repaired,. No

_ . 7~ 4j t ) . . . . . / Z I................ . . .  : Replaced ,

D~~~~~~~~1,AE 1/* AtS-3./ *Vf 70A Aw Ai Ft0 Rae~ o

_A_'A_k_ 9< ~~~~~~ 7 1..

.rdA 4k )IA - _4'~~~~~~~~~~~~~~~~~~~~~~~~~~~~Repair

_~g A'~~~XI ~~Replacement Yes O - Repa~~~~~ ~ No

~~~~~~~~~~~~~~~~~~~

• $M6 -3$V~~~~~~~~~~~.7~~~~/IA-~~~~~' oo I ~~~~~Replaced, E Rep~aired,

~~'.'~~~' ' ' ' ~~~ _______________ - ~~~~~~~

Replacem ent Yes F _ _ _ _ _ _ A X __ -

Re Ired./z3.No Pale I ot2 Revision 7

ASME Section XI Manual Section E Exhibit A Fofn NIS-2 (Back)

NOTE. Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1)-.

size is 8 12 in. x 11 in. (2) information in itemsl through 6 on this report is included on each" sheet, and (3) each sheet is numbered and the number of sheets Is recorded at thetop Of this form.

7. Descripiono Wofk P 404 HAS. 3XS-2 ' AS Af7

8. Test Conducted: Hydrostatic Pneumatic';- Nom. Operating Press. Other Exempt r 9 --

Pressure °j -psig Test Temp. ,S7l b .1 I..

Pressure _ pslg Test df Temp.

Pressure ,'psig Test Temp. '_°F ...

'- WMQ4 64.6, IMe),-te9_57-14M19 A1,04 IWO Aw~e5 BE

Everett --W * -

(A4pplical~e lamifctdures8 Data Pecords ft be aftactiod),

CERTIFICATE OF COMPUANCE(

We cert tNat the statements made In the report are conrectAnd this repair or replacement oonforms to the rules of the ASME Code, Section Xl.

'Type Code SoSWWWAt!

Cer~ficatvg~wkorj~pn No. NA!t 'Expiration Date WA S y / j~lilg4;'M4 Hi Date e/L.OCIZ f

CERTIFICATE OF INSER VICE INSPECTION I 1,the undersigned, hokling a varli commission issued by th" National Board of Boiler and Pressure Vessel Inspectors and the State or Province of D!Aistal Go I

and employed by ii HSBI and I Company of Hartford Connecticut have inspected the components described In this I Ownees Report buning the period /7 -& to P -C- a-m: and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measyres described in this Owner's Report in accordance with the requirementsof ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective rdeasures descnbe4 in the Owner's Report Furtherm6re, neither the Inspector nor his employer shall be Fible in any mahner for any personal injury orproperty damage or a loss of any kind arising from or connected with this inspection.

.IŽI Eve- x1

." .loozv-~no AIt J4'I/404 Al is National Board. State. Province and Endorsements Date *LZ-___

Page 2 or 2 0 Revisijn 7

I- .C ASME Section Xl Manual FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Section EExhibit A As Required By The Privisions Of The ASME Code Section Xl

1. Owner Address: la. Date ___Z7-__

526 S. Church Street. Charlotte NC 28201.1006 Sheet of .of '

2. Plant Address 011ONF!W El ~a!I ~ATni 1-800 HIRSrR.TwTR WWY .SWWRC!A . r 29672 2a. Unit: I 2 'V Shared (specify Units r

3. Work Performed By: 2 Pe mPany 3a. Work Order # :______

Address: 52:S. Church Stret. Charlotte NC 28201.10Q8 ft"IpOM4a*Wn Jobe Type Code Symbol Stamp: NM Authorization No. k19 Expiration Date: WA 3b. (or MM I#:_____

4. (a) IdentificatIon of System: I~ sA)~1 4. (b) Class of System: zi I

5. (a) Applicable Constructilo Code:' ~ o  :'9 Edition, Addenda, ' Code Cases' (b) Applicable Edlilon of Sectlon XI Utilzed for Repalrs or Replacements: 1modd g (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identilicalion of Compoqents Repaired or Replaced and Replacement Components:

Column 1

__ Column 2 Column 3 Column 4 Column 5 Col 6 Column 7 Column 8 Name of Component Name of Mfg. Mfg. Soval No. Nafonal Soard No. Oterlntificatlon Year BuDt Repalrd, Replaced, or ASME Code Samped

__________________ 7___________ _ _,_._>_ _._. _ 8.oRepa Repaired, ment Neiorno)

.s . . I A Replacement Yes Repaired,. No 3a ' SIV6 -,ez &RWA& /Wm vzof 7-~~~~,'-,j

• AO Replacement Yes D ./Repaired, No z AZX Deal ~~~~~~~~~~~~~~~~~~~~~~~Replaced

~~ ~ivooo.4t eOZ/2758j,, ______ _____I Re acerent yes N -.. L~~~~~~~~~~,...

~~~~~Repaired, No

____________________ 6Repfaced, Psge 1of 2 Revision 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsn1 through 6 oh this report isincluded on each -

sheet, and (3)each sheet is numbered and the number of sheetsis recqded atthelop.of this fo.rm

7. DescdptionofWorkk916~ Y*5AZ 0

8. Test Conducted: Hydrostatic Pneumatic'; Norm Operating Press. Other Exempt

_~~~~~~~~~~~~~ _4 . I Pressure Test TempAV&jLF "  ;

Pressure psig Test Temp. *- *°P Pressure _PS1g Test Temp.. OF I. /

9. Remad(s Mftleffl .11,5, , /,Wr,,!!5r7 14Nq J,/aE7 A4,) 4eq (A4pplcable Miamufacurees Data Records to be attadied)

CERTIFICATE OF COMPLIANCE We certfy that the statements made In the report ar conect and this repair'or replacement conforms to the rules of the ASME Code, Section XL Type Code SV Stamp nof WA CeuthorttiowNQHGQ yy Expiration Date,WA Sig rj p4D t v2e x~~wrtrof naTie a 4 £ CERTIFICATE OF INSER VICE INSPECTION i

, the undersigned. holdng a vald comissionissued bytheNat'inaBoard bf Boier and Pressure Vessel Inspectors and the State or Prvince of d M and employed by HS1B1 and I CorManv of Hartford Connecticut have Inspected the components described in this Ownees Report iluring the penod t-a ' to t-S  : and stale that to the best of my knowledge and berief, the Owner has performed examinations and taken corrective measures described in this Ownees Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective easyres described in the Ownee's Report. Furthermore, neither the Inspector nor his employer shall be riable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions /V . /4-'/? Al Irz nspectos nature *National Board. State. Province and Endorseents Doate }~T .0 Page 2 ofr Revieion 7

ASME Section Xi Manual FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEIMENTS Section E Exhibit A As Required By The P4Mlom 01 The AGME Code Secton XI

1. Owner Address: Duke Power COrn~eny la. Date 526 S.Church StreetL Charlotte NO 28201.1008 Sheet of

2. Plant Address: OrONEE N~T(T.1'A1 STATTON 1780O RQfl mmTR

, R NW.!A S- - 29672 2a. Unit: 1 2 6( Shared (specify Units,

3. Work Performed By: Quke ft.EigirCmianv Address: 526 S.Churoh Street. Chadotte NC 282QI1008 3a. Work Order #: 6 7; 3f5 lp*ir Organiuation Job'*

Type Code Symbol Stamp: t 9 Authorization No. M Expiration Date: WA - 3b. &r .,..,..., , _ I

4. (a) Identification of System: -- W b2-/A ~  %~4 4. (b) Class of System: Z

s. (a) Applicable Construction Code: Edition, / Addenda, A9 Code Cases (b) Applicable Edition ol Sectlon Xl Utilized for Repairs or Replacements: 1988 No ddea (1992 through 1892 Addenda for Class MC and CC and their supports)

6. Identfication of Components Repaired or Replaced and Replaeoment Components: '. i Column 1 Column 2 Column 3 Column 4 Column 5 0Col 6 Column 7 Column 8 Name of Component Name of Mfg. Mfg. seirui No. National Board No. rterldiaton Year Bullt Hepird, Replaeod, or ASME Code Staiped

- . . Reolacement Uthe orno)

A ~~~~~~~~~ ~ ~~~~~~~~~~~~~~~~~~

SO1 chas e X /_35 AI - .

Replacement Yes

~~~~~~~ / Repalred,*~~~~~~~~~~~~~~~~~~No RepeaiL, 14 vZ%- - V I'. _ __ _ _ _ _ _ _ _ __ _ _ _ e

• /'<'  ;'#v . '~4~ Relacementl Yes v/,* / Repaired, Replaced No E R~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3 E 't57ZS ( fQN X

____________ __________ - Reolacement Yes F 3VSV Repaired, No 45 1 ~ -

• ~~~~~~~~/ e,/Z/Z 9 _ _ __ _ A4 _ _1 __ _ _ _ __

AIX

_ _ _ __ -R~~

1 ~~~~~~~~~~~~~~~~~Replaced, M__ nt Page I or2 RevIsion 7

ASME Section Xi Manual Section E Exhibit A Forn NIS-2 (Back)

NOTE: Supplemental sheets in form of ists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items1 through 6 oh Ibis report ts included on each sheet, and (3)each sheet is numbered and the number of sheets is recordedat the top of this form.

7. DescriptonofWork -A 27 4 V .VS75

8. Test Conducted: Iydrostatic Pneumatic' Nom Operating Press. Other Exempt Pressure -Dpsig TestTemp.AL3F  ;

Pressure p psig Test Temp. , °F -

Pressure -'2pstg Test Temp. .-- F 9 ReMt ZME W(,c MAnufac-We- -

- Pei eCowd- beatt h

)/.- /A*

-ed).

I (Apke Mwxadus Dat cords to be afhed) . I CERTIFICATE OF COMPLIANCE ,.  :  ;

We ceify that the statements made hI the report are core and this repair or replacemenit conforms to the rules of the ASME Code, Section Xl.

Type Code Sywnbol Stamp WA->

cersieoftoriza~~~iQ~~o ,/l ti'piration Dato N/

SignnS0/(WF IWSCDate/ t 4.

I t

CERTIFICATE OF INSERVICE INSPECTION' 4 1,the undersigned, holdng a valid commission issued by the N 9 Bti oard of Boiler and . I Pressure Vessel Inspectors and the State or Proince of A 1V CA1i,, and empbyed by I HS81 and I Comoany of Hartford Connectt have Inspected the components described in this Owners Report ifuring the period J to f - -. nd state that to the best of y knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective rneasvres dbscribedtin the Ownees Report Furthern6re, neither the Inspector nor his employer shall be riable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions 1k( JkM El iyr2

/Inspeeto~s is~ture' National Board. State. Province and Endorsements

.Date i JL. 2 Page 2 of 7 Revision 7

.... r ASME Section Xi Manual FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Section i Exhibit A As Required By The Prvions Of The ASME Code Setion )0

1. Owner Address:, D2uke PowS.hrh man t t la. Date //_Z;____/

52B S.Qhurch Street. Charlotte NO 28201 -100B Sheet of l_

2. Plant Address: "OCONVE ¶1UGT.ZAR STATIflN I 800 RAO1M'T'A Ma - SZHEO~A. S- .~29672 2a. Unit: 1 2 -Shared(specify Units

3. Work Performed By. Duh2 Pwr Company 3a. Work Order #: _______

Address:  : 526 S. Church Street. CharotteNC28201.1008 ft"I*Orgmnkofnion Job Type Code Symbol Stampi"1N AuthoIzttlon No. .l9 Expiration Date: NA 3b. t~or mm ', *3- '0e'67

/,*20 d! - A .  % ^ - - . 10,-1

4. (a) IdentificatIon of System: Z6!:h2 mInm' f 4. (b) Class of System: -

5. (a) Applicable Construction Code: /EditIon. E .9LtC Addenda, ___ Code Cases (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements: (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identiflcation of Components Repaired or Replaced and Replaoement Components:  ;

= Column 1 Column 2 Column 3 Column 4 i Column 6 Col06 Column 7 Column 8 Name of Component Name of Mfg, Mfg. 'Suial NO. National Boerd No. Omtr Idenlloatlon Year BuIlt Repaed, Repfaced, or ASME Code Stamped s # .  : - . .  : R~~~~~~~~~~~~~~~~~~~~~~~~~~~~Flo mleor no)

A j~~'" , ,- Roepared, GO

.C0 _ _ _ _ _ ______________ ___________ Repacem ent Yes 8 V /Z 30 0: v 1 Repaired: -n No C Repaired, No Replaced,

_ - Replacement Y es D - - Repaired, No Replaced,

. RePlacement Yes E r RepaIred, v No Replaced, Replacement Yes F Repaired, No Replaced,

- -; 81 Redacement

. Yes Pcp I or2 Revision 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work 7f .4

8. Test Conducted: Hydrostatic Pneumatic . Nom. Operating Press. Other Exempt Pressure eo5iOpsig Test Temfp.v 5ZF Pressure ps1g Test Temp. 't F Pressure psig Test Temp. eF

9. Remarks

-I -

__e (Appicabe Manufackues Data Records to be attached)

CERTIFICATE OF COMPLIANCE We certify that VW statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Sy"I Stamp WA Certificat of o. ! A Expiration Date WA Sg Dte7 god, ~Date .iiZMC1L. s!

CERTIFICATE OF INSERVICE INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and .

Pressure Vessel Inspectors and the State or Province of Alg &atnrn and employed by HSBI and I CoQmany of Hartford Connecticut have inspected the components described in this Owners Report during the period -- i-} 7-a' to g ^-f-oz- ;and state that to the best of my knowledge and beief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinations and corrective A-easures described in the Owner's ReporL Furtherm6re, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions I.VrC it/ a t

~JispetorsSig~*(ire~ National Board. State. Province and Endorsements Date $ .

PagC 2 or 2 Revision 7

I Section Xl Manual FORM NIS2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS . secion E ExhNbit A As Required By Th Prns 01 The ASM! Code Section Xl

1. Owner Address: She. /.

Date ' °/

528 S. Chuch Street Charlote NC 28201.1008 I Sh~etiSlf- I

2. Plant Address:

• R00 MAeM1ATER ~W. W1-ERCA1A R-C29672 2a. Unt:, I 2 IV Shared (specify Units

3. Work Performed By:. Quk2awPrn Zmpanv

. Address: 525S. Church Street. Chadotte NC 2820141008 S'a. Work Order #:

&-floI!pe~Orn~IovsftMwI

°

-~~~~~~- *S-. V%/Y ,

Type Code Symbol Stamp: NM Authozatilon Nog.- & Explrptlon Date. 5N 3b. NSM or MM 4: . ' ' "

4. (a) Identification o System: i 4. (b) Class of System.Z S. (a) Applica Ponstruect on be Code: Edition ____ _ Addenda_ _ -__i CodeoCases (b) Applicable Edition of Section )dUtilized for Repalrs or Replacements: I989. No adderda (1992 throug 12 Addenda for Cia- MC md CC and their supports)

6. Identification of Compodents Repaired or Replfced and Replicoement domponents:

Column I I W Column'2 Column 3 Column 4 Column 5 Colt S Column 7 1 :Column 8 Namo ComWponent NIi o Mfg. 7' Mfg. eih1 No, Natlonnurd No. ofherldenffioatin Yarutmt R1palrmdReplacdor ASMSCode8teny

. - :.; n . . ft osrno)

B~~~~~~~~~~~~~~~~~~~~~~Pboo V./_ .  : . .. e l e c . . .. - Repaired No Replaced, Yes C . E. -  ; . . . \

Replaced, Repired No

__ _ __ __ __ _. _ _ __ __ _ _ _ R epl ac em ent Y es EF . . i _.. Repaired, No Replaced#

_________________ _______________ __. Replacem ent Yes F Repaired, No Replaced,

_~ . .l - RePlacement Yes Pop 1o(2 g.v~tt" I

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 12 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. -

7. Description of Woik

.£S Vl AAk VdeAl A'* 6Z2e VLV.

OF; -

2!o40,65r7*A'~eZ A/4&5; _

8. Test Conducted: Hydrostatic Pneumatic Norm. Operating Press. Other Exempt Pressure .5i )psig Test Temp6 7- F Pressure psig Test Temp. - F Pressure psig Test Temp. °F 9._Remaz7,,

-s(c5 I64~k 7-55r1 e-'W NZ3a: ,W')

,4k-MF -56 ,4)vu fle,V 7/7t? c-A-v Al -4VG'&-7 j -

(Applicable Mn4achures Data Records to be ated)

CERTIFICATE OF COMPLIUANCE We certify that th statements made in the report are correct and thils repair or repaement conforms to fte rules of the ASME Code, Secton XL Type Code Syrmbo Stamp WA -

Cerff Noo. xpiration Date WA S719} 1 1 flyIII & r Date4;v", 28 or os-% r- rwns

- CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a varid commission Isste by te Natlona Boacd of Boiler am'd.

Pressure Vessel inspectors and the State or Provine of &kuA/I Z and emptoyed by MISBIand I Comrany of Hartfod Conriecticut have inspected the conponents described hI tfis Owrnees Report iurkng te pedod ZZ.-that fL2. to F :and state to he best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Ownet's Report in accordance with the requirements of ASME Code, Section-XL c By signing this cerfificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations -m crrective measures deschd In the Ownees }

Report. Furthermore, neither the Inspector nor his employer shalg be liable in any manner for any personal injury or property damage or a loss of any kind atising from or connected with this inspection Commissions /V./' /#103 /q 1/422 S slect sS National Board State Provice an Endorsemes O~atti .. 1Z4-.. 6>

PaC 2 of 2 Revision 7

-AL Section Xl Manual FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMETWS Section E Exhbit A

. ' As Requsd OyThe PrAkslons Of The A8MS Code Se0ton Xl

1. Owner Address:. 1a. Date Z'/ <)/

528 S.Church Stret. Chaolote NC 28201.10M Sheetol / o L

2. Plant Address: OGONFVW9 WOTYnJA1 Rq'Aq'TnN

• 4Rfl Rnomrwg MM .SN5ElA- S-r! 29672 2a. Unit: 1 2 § Shared (specfy Units i

3. Work Performed By: Duke eg~r Qornan 3a.Work Order If:

_e8'7p gMtnoflenJO I A~~I~p*t

,/-r-2I .

Address: .528-. Chumb Street, Charlotte NC 28201.1008 Type Code SymbotStamp: NtA Authorization No. 9 Expiration Date: ' 3b. NSM or MM #:_

4. (a) Identification olSystem: t77 Poof ysem

s. (a) Applicable Constructlon Cod.d e. nAdena, _ Code Cases (b) Appflcable Edillon of Section Xl Utiifzed for Repairs or Replacements. (fthrh Addondalor Class MC and CC and their supportS)

6. Identification of Components Repaired or Replaced and Replacement Components:

Column 1 Column 2 Column B Column 4 Column C 1_ Column7 Column 8 Name dfCOf Of., Name 01 Mfg. Mfg. SOeN Not Natfotml ard N* Qf z1I f Year R el Re a o ASMS od tm

~7

, O /A k .R z . . . , . P.S Iff A,~~~~~~'

tajA?

' RI 's' - l 0  ;# Y e@s B . . . , . .Repalred; No

. : :  ; .  : . ~~~~~~~~~~~~~~~~~~~~Replaced,

_ . -  : _.;._,_ :____-_:_ Rediaoement, Yes c  : . . .~~~~~~~~ Repaired, No

. . . r . . . . ~~~~~~~~~~~~~~~~~~~~~~~~Replace

_ .__ _ _ _ _ _ _ _ _ _._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __-_ _;_ _: Rep la cem ent Yes O . . s ~~~~~~~~~ ~ No

~~~~~~~~~~~~~Repa

. . . . . . ~~~~~~~~~~~~~~~~~~~~~~~~~~Repla

.__ _ _ _ _ _ _ _ __ . :_ _ _ _ _ _ _ _._ _ _ _ _ _ _ _ _ _ _ _ _ _ __'_ _ Re P lacem ent Ye s E . . .~~ Repaired, No

. ~~~~~~~~~~~~~~~~~~~~~~~~~Replac

_ __. __._ _._.__, RePlacement Yes F  :

• Repaired, I No

. . Replaced,

_ _____-____.____.____ - Replacement Yes Pqs I ot2 Re'vqdow 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 112 in. x 11 in. (2) information in iternsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Wo 3P/ 4 Af4 /

• J

8. Test Conducted: Hydrostatic Pneumatic Nonui O.pe Other Exempt PressureA/iip PressurTeteT g TestsTe t OF Pressure pslg Test Temp. °F Pressure

• psig Test Temp. F

9. R4!0

/V4e -i &4$4'6 pfffpica~e Manufacturers Data llecds to b. aftachd)

CERTIFICATE OF COMPLANCE We certify that the statements made in th report are correct and this repair or replacement confonns to the rules of the ASME Code,Section XI.

Type Code Symbo Stamp -A Expiration Date WA VI 1A Y'4 5 :rDate4<L.

Pessure Vesse I Hssurande VCol Inspet n

CERTlFICATE OF INSERVICE wISPECsIO.i 1.the undersigned, holding a varid commission issed by the Nattial Board of Bolter ad.

n ecCtit or P e of .'A4 w and e Tployed by inhavespected the components descnlbed In this Ownees Report diuring the perod /.--2 0£I to/&D ;: and state that to the best of my

• 1*

knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accordance with the requirements of ASME Code. Section' i Xl.

I By signing this certificate neither the Inspector nor his employer makes any warranty, expressed C' !,..

or implied, concerning the exarinations and corrective measres descrbed in the Owneeis -'

Report Furthermore, neither the Inspector nor his emnplyer shalt be lable In any mannterfor any personal injury or property damage or a loss of any kind arising from or connected with this inspection. i Inspecors Signature

/~

Commission NaCion

<5 Board, State, Proice and Edsemnents i

t3-/P-w2-ftoge 2 of 2 Revision 7

A 4A - Section Xi Manual FORM NIS2 OWNER'S REPt RT FOR REPAIRS OR REPLACEMENTS Section EExhrolt A As Requed By The Of The AS Code Sect X __

1. Owner Address: la. Oate _________

528 a. Qhurch Sltret, Chaollte-NQ 2o201.109A Sheet .1..

2. Plant Address:

18000 fl = TERW MM,~ 9.ZNVCh SGj- 29672 2a. Unit: 1 2 62 Shared (specify Unit.s

3. Work Performed By: Dk EMLQom2= 3a. Work Order #: O7 7 227' Address: 528 S.Churcb street. CharoteJ It 2820l.Q00 F190ef9s*s$on M .U Type Code Symbol Stamp: I Authorizatlon po., Expiration Date:. WA S3b. NSM or §5r@lv w _ -

4. (a) Identification of System: 4767 Z ' 4.. (b) Class of Systelm: /

5. (a) Applicable Construction Code0  %$ MtP WO ' Addenda V-' Code Cases (b) Applicable Edltion of Sectlon Xl tllzed for'Replrs or Replcement. 189.NoAddend (1992 through 1992 Addenda for Class MC and CC and theirsupports)

6. IdentIfication of Compo ents Repaired or Replac and Replacement Components:

_ Column 1 . Column 2 Column 3 Column 4 Column 5 Iol 6i Column 7 Column 8_

1Component oName Name of Mg. ,g. M hi8l No. National Brd No. Qovnefloktron Y"t Bsumt RepaISd, Repaced. or A$MM Codtaied

._______________. . . . . *._____ Rectpeament h1 hel B ,;

S.: . ,T Repaired, No

-... Redement Yes C

-  : , . : 7, . . 7 , r . Repairedi, No Replaced,

., _________________ ,_________ . _ - Replacem ent Yes D . . , ____

. ____ ___ ____ __ ___ ___ ____ ___ _ __ ___ ____ ___R Repaired, eplace m ~en t No Y es Replaced, 0

E . Repaired, No f Replaced,

_______________ ,____________ - Repaired, No F

, . . RePla cement Yes

~~~~~~~~~~~~~~~~~~~~~~~~Replace RepaIred. No Replaced,

- - Yes

~~~~~~~~~~~ ~ ~~~~~~~Replacement htle I o(2 pvqlo.m I

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Sulmenlal sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 -9pin.x 11 in. (2)information in iternst through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. DescriptionofWok.)FV2~0 y / / ' _

8. Test Conducted: Hydrostatic Pneumatic'- N oT~nss. Other Exempt Pressure ZS sig Test Temp.A<4 ° F Pressure @ psig TestTemp.. °F Pressure ipsig Test Temp. -F g /.?J7F54'

-~2-t VZ)'

I 1

- 6' LA Ya .

(AppkaUe, iiiutckwees Dat Riewft1o be6afttched) 4ERTI:ICATE OF COMPLIANCE We certify that the statements pade In the report are correct and this repair or replacement conforns to the rules of the ASME Code, Section XL .

Type Code S 63>tarn WA Ae Expiration Date W .A CERTIFICATE OF ItNSERVICE INSPECTION ' . .jA 1.the undersigned, holding a valid comissinisd by wNattnsl Board ofBoiler .and ..

Pressure Vessel Inst or Prince 6Vt11 and employed by I .

tSol and I CoMM ang 0 9n have inpected ne components described in this -.

Owner's Report iluring the pdod /2.-Y-O/ to _3-L[Ci:,-a state that to-the best of my' .

knowledge and belief, the Owner has performed examinations and taen corrective measures described in this Ownees Report in accordance with the requirements of ASME Code, Section XL .. ._

By signing this certificate neither the Inspector nor his employer makes any warranty. expressed T -.

or implied, conceming the exarninations and corrective measuresdescribed in the Ownes -.

Report Furthermore, neither the Inspector nor his ernployer shall be iable In any manner for' any personal injury or property damage or a Ioss of any "indarising frorn or connected with this in spec f a'~~ Commissions_ _ _ _ _ _ _ _

lpes ig re Nafonal Board, State. Povnce and EnorKserrents

_ .,, _ ' 9~~~~~

0310,-7 Pzoe 2 of 2 Rcvisiod 7

L rc Section Xi Manual FORM NIS2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Reqtred ByThe Prvltons Of AM Code Se-on)(I Section E Exhlb t A I Owner Address: la. Date______

528 S.Qhurch Street-9Ctarttte NC 28201.1008 Sheet ,L of /

6

2. Plant Address: OCO0NE NTT(L.1AR 'AI'TflNj 1-0R0OMMflW ZEW1lW.- SENEfA- q- 1 29672 2a. Unit: 1 2 137 Shared (specilf Units

3. Work Performed By: D P Qgm~an " ' 3a Work Order #: 716 =t7V~ 61-Address: 528 S.Chumb %ret.Ohftne NC 2820i.1008 I!.pe~~~~~~~~Org.~~~~~~~*s~~~~bi Job'~~~~~~~~

Type Code Symbol Stamp. hM AuthozZia Explrtion Dato: 3b. NSM or MM #:

4. (a) IdentilfeationofSystem:  ! - 4.. O s ofatSystem 2

5. (a) Applicable Construction Code: h', 7 Adoend _ _ _ __ _ _ __ _Code (b) Applicable Edition of Sectlon XV UtIlIzed for Ropalrs or Replaecments: ,1989. No Addenda: (1992 through 1992 Addenda for Class MC and CC and their supports)

Cases

6. Identification of Components Repaired or Replaced end Replacement Components:

Column 1 . Column 2 . Column 3 Column 4 Column 5 Cot - Column 7 Column 8 Name o Component . Nameof Mfg. Mfg, $#"aI Not National Board No. ot idmtifloaln Year Bvift flpuirre,Riplaod, or AeM! Cod stmped A~~~ - __ ._ _ _ _ _ _ ~ th r 9  : Repaird-r : 7 .. :T 7 7 T ^ 7 , 7 7

__# i  ;;  ! . ;_ ._ ._ _ . _0 j.n_ 7e n ts C , .. . . Repaired, No

________________._ _____ ._ ____________________._._ _________________ _________________ _._ _._ _._ _._ __ Replacem Replaced, ent Y es D . ' Repaired,. No Replaced,

____________________ , . . . ._______ - Redacement Yes E  : . . . Repalred, No Replaced,

_____________________ __________________ Replacement Yes F _ .-- 0 ^ t _._ .__ Repelred, No Replaced,

. .  ;: . . .

• Repaired, No Replaced,

- Replcement yes Po I or2 DROM4#I J

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in iternsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Wook

8. Test Conducted: Hydrostatic Pneumatic Other Exempt Pressure psig Test TempA<// ;

Pressure psig Test Temp. F Pressure

• _psig Test Temp. OF 7 /Y -S v' ' A - '

(AppiiablfarwE3 s Data Reods to be ataded)

3) /

CERTIFiCATE OF COMPLIANCE We certify VWat the statements made In the report are correct and this repair or replacenta conforms to the rules of the ASME Code. Secton Xa, Type C~ode Starnp -WA, Certificate riz Expiration Date &A sgl//

S71 f WG Eate&Ae& -2~

Own or ft .wdl~ -e , i CERTlFICATE OF INSERV1CE IFtSPICTON 5 1.the undersigned, holding a varid commission issd by the4atknaI of oI8er and . .

Pressure Vessel Inspectors and the Stite or Prvince- ofd $ A . and employed bi HSBI and I Company of Hartford Corntut have inspected the componets described in this Ownees Report 'during th peiod '-2 Y^-0/ to 3 ,Y-"2- and state that to the best of my n knowledge and belief, the Owner has performed examinations and taken- corrective measures desctibed in this Ownee's Report in accordance with the requirements of ASME Code, Section Xl.

t By signing this certificate neither the Inspector nor his employer makes any warranty. expressed T J.,

or implied, concerning the examinations and corrective measures dscrbd in the Ownees -

Report. Furtherm6re, neither the Inspector nor his empoyer shal be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with tis inspection. OF inspecAN Commissions _ _ _ __ _

lnspecWs Signature National Board. State. Province and Endorsemens Pazc 2 of 2 Rcvixio77

(t

\ i . Section Xl Manual FORM NIS.2 OWNER'S RiPORT FOR REPAIRS OR REPLACEMENTS 1Sect~on E Exhibit A As Required By Ths Prsions 01 The ASME Code Scton XI 1.\Owner Address: Duk5PoweS Ch mtany t 2 la. Date -Z-/7-6 6225 S. Church Street. dhedott NO 28201.1006 SheetL ofL of

2. Plant Address: !OCONW. Nft"YABFATtq'ITO N aaQQ Rfl!W W Z,~ SWNWA! I(L 29672 2a. Unit: 1 2 (? Shared (specify Units

3. Work Performed By: Quke Powr mbqnv ' Sa. Work Order #t: / 7 /' f-Address: 528 A.Churc a NC 28201.1_Q8 . !

I e~O~p~*sltonX Type Code Symbol Stamp: At zatlon No. 9 Expiration Date: IM9 S3b. NSM or MM I: __:^

4. (a) identlifcatlon of System: = (b) Class of Systemo /

5. (a) Applicable Constructllo Code: A dz A /. 7 Addenda

• Code Cases (b) Applicable edition of Section Xl Utilized for Repairs or Replaoments: (1992 through 12 Addenda for Class M and CC and their supports)

6. Identillfcatlon of Components Repalred or Replacedand Replacement Components:

= Column 1 Column 2 Column 3 Column 4 57 Column Colurn 8 Name ol Compoftm Name *I Mfg. Mfg. Sedal No. National 0oard No. Other idmntlfln Year 8Built Repaired, Replosed, of ASMS Code tanWd

_ w y & .J/A C _ _ 0#°)24

_ _ _ _ _ I~

7? oment Yes B Repaired, No Replaced, No

____________________ _______________Red laement Y es c X < X - -  :. . ~- __ _ _<_; __-Repaired. No Replaced,

_________________ _._ _._._ _; Replacement Yes D F . .. T7; . 77 . '; 7 . r r Repaired, No Replaced,

__ _ __ __ __ __ __ __ __ __ _ _ __ __ _ _ __ _ _ __ __ __ __ __ _ _ _ _ __ __ _ _ __ __ __ _ __ __ _ __ _ __ _ _ _ _ _ _ _R entY eplacem ence ee E

• Repaired, No Replaced,

-  :-: S . . . Replacement Yes f . Repalred, No Replaced,

. . Replacement Yes Page 1ot2 R04010M 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches. or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items1 through 6 on this report is included on each sheet. and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Desciption o(Wodlc 7 A I%/f//P/ Al, Z ffi2 9Prn6" /) ~SC-Ozil.

8. Test Conducted: Hydrostatic Pneumatic Operating Pres Other Exempt Pressure2F/5psig TestTemp.A-°F Pressure - psyI Test Temp. °F Pressure p pslg Test Temp. °F

9. Remarksl oaqyoole

-- *4*-r J &4k* ?2t-6/-ON A26 X1 -; A"-41A

. I -

i- 77Zo "?77-2-ilw

.I .1;W / ',- - - -

- 2E-I!EH

&-z:U-ffJr/

I - - 3 /Z 1- I . . I

~kable Umwbamft Data ROMKIs to be aWdWd)

CERTIFICATE OF COMPLIANCE We cer*fy tat the statements made In th report are corect and this repair or replacement conforms to fte rules of fte ASME Code, Section XL Type Code Symbol Stamp, E t e

.LV o,A 2< - Expiraton Date N(A Sigg A~j.,~ Date / 7 ^

dvowsir~e- -

i CERTIFICATE OF INSERVICE INSPECTION the undersigned, holdmg a vald conmission Issded by te Natial Board of Boiler and '

Pressure VessplJ  ; ard the State or Province df W2-Aw demployed by I 7.

RS8J and I Co~ii 6 Connec have 'inspected the components described inthis Ownees Report during fte period ,2-Y°I to 3 -/VOXz. and state that to-the beit of my knowledge and belief, the Owner has performed examinations and taken corrective measures I ..

described In this Ownees Report in accordance with the requirements of ASME Code, Section:

Xi. .

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures descibed in the Ownes t Report. Furthernnre, neither the Inspector nor his employer shall be liable in any mannet for any personal injury or property damage or a loss of any kind arising from or connected wVth this g/> f, . . ~Comrnissions 5 National oac. State, Provine and Endosemenrts PA.. 2 of 2 Revision 7

C-00 FORM NiS-2 OWNERS REPORT FOR FRAiR.OR REPLACEMENTS As Requred By The Provisions Of The ASME Code Section XI -

1. Owner Duke Power Company . ia. Date a Uis Address 526 S. Church Set, Charlotte, NC 28201-1008 Sheet V of /

2. Plant IOconee Ncear Stton Address 7800 Rochester Hwy. Bgneeai 8.C. 29672, , Ww .O

.~~ 1 2a. Unit 01 02' 0 Shared (specify Unt

3. Work Performed By Duke Power Company 3a- Worl Order A Repair Organization Job #

45tN Address 526 S. Church Street, Charlotte, NC 28201.1006 Type Code Symbol Stamp WA Authorization No. NIA Expi D 3b. NSM or MM # _ _ _ _ _

4. Identifiation of (/SS /

5. (a) Applicable ConsnictonCode 1een nda, -- Code Cases (b) Applicable Edition of Section Xl MUized for Repar or Replacements189, NoAddenda (1992 through 1992 Addenda for Class MC and Cc and their supports.)

6. Identification of Components Repaired or Replaced and Replaement Components Column I Co'umn 2 Column 3, 0'umn 4 CON" CoW.6 column S column 8

.

X T TT 7 Nafonal 7^-ler 7Vea ~~~~~~~Repaired, ASME Code Name of Componret Nam of Manufacturer Manuactaer NatboRna Ya r B W Ynt f: at on w RRepare ep i cedtor AM Stao Condd A ~ ~ ~ ~ ~ , 461~~~~~~~~~~~~~~~~~N

, %5V o D _ _ 7 0 - ____ < R MYes

_~ ~ ~ ~ ~

E_______

C

~ ~~

___ ORReplaced O__Replacmnt

__es

~~~~~~~~~~~~~~~~~~~~~~~~0 Oe oreno No D

_________ ._ . ORepacement O Yes O~~~~~~~~~~~~~~~~~~~~~~~~0ReplacedCv O Repaired O No ORepaired D 0 ~~~~~~~~~~~~~~~~~~~~~~~Rep

_ .. . . O~~~~~~~~~~~~~~~~~~~~

Reptaeren O Yes F RepaWrd

~~~~~~~~~~~~~~~~~~0 No O3 Replaced

- 0 Replacement 0yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 In. x 11 in. (2) Information In items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work I D h Z"A/ty VA) 3 - 56 PAI /

8 Test Conducted: El Hydrostatic El Pneumatic El Nominal Operating Pressure El Other ;TEXempt Pressure _ _ psig Test Temp. OF Pressure _ _ psig Test Temp. °F Pressure _ _ _psig Test Temp. 'F

9. Remarks

',IG - _

(Applicable Manufacturers Data Records to be Attached)

. k CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi.

Type Code Symbol Stamp NWA Certificate of Authorization N Exp fration Date WIA Sb_

_-;r-

, A_E.__ ,, . I_ _ _ _ _-

%-//

14irate 5;e-1 141o-01 Owner of(Owne- silgnee, ile CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commiasionl~suqbytre. National Board of Boiler and Pore Vessel Inspectors and the State or Providence of and employed by 7AJA%

17*1 have inspected the components described In this Owners Report during the period . -!:a63.

to 7-16e:n3: and state that to the best of my knowledge and belief, the Owner has performed exarinatons and taken corrective measures described in this Owners Report In accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owners Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

A)" c commissions- N,(// 4 f.4,6, W-T-In Signatu . . I National Board, State, Providence and Endorsements I---

Date 7-/4 -) 3 Page 2 of 2

AZ FORM NIS-2 OWNERt§ORT FOR REPAIRS OR REPLACEMENTS

(

As Required By The Prisns Of The ASME Codo Section Xl . .

1. Owner Address: Duke Powe Comranyo la. Date IA4*III :

526 S. Church Street. Charlotte NC 28201-1008 -. Shoot I....Of J....

2. Plant Address: QGMZR MIGI&BSIATThN 7-810O RC)MWqT1VR MM- gRW-CeA S-G 29672 2a. Unit: I 20 ( Shared (specify Units

3. Work Performed By: DukePowerComianv Address: 526 S. Church Street. Charlotte NO 28201-1006 3a. Work Order#: 9%?3T72 i1q-~o((

Repek OrgerfutsbW Job #

Type Code Symbol Stamp: N/A Authorization No. ~fA Expiration Date: NAt 3b. NSM or MM #:

4. (a) Identification of System: 2eca&Cr C2olan 4. (b) Class ofSYS

5. (a) Applcable Construction Code: 1* '1 1 Editlon, - Addenda, ___ Code Cases (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements: tend (1992 through 1992 Addenda for Class MC and CC and their supports)

6. IdentifIcatlon of Components Repaired or Replaced and Roplacement Components: -

Column 1 Column 2 Column 3 I Column 4 Column 5 I Coi 6 Column 7 Column 8 Name of Component Name of Mfg. Mfg. Sedal No. Naftonal Board No. Other Identiftation Year B1t l Repalred, Repaced, or ASME Code Stamped

_~ ~ ~ ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1108"L

..edcmn .- vor0 no)

A -. Repaired, L~~ . b~ .D~~_ _ _ _ _ _ _ _ _ _oe ._.__ . . Replaced,n j Yes

.XD __ ___ __  : . 0_ _ ~~~~~~~~ ~ ~~~~~~~RePaired, I No MX__ .q a menL Yes Ec 7No) Repired, Replaced,

. SVI_

- Replacement Replaement Yes Yes

_ , - ~~~~~Replaced, ,

_Repaired, No I Replacement Yea F  ; . Repaired, No Replaced, Pge I or2

Form NIS-2'(Back)

NOTE: Supplemental sheets in form of lists, sketches. or drawings may be used, provided (1) size is 8 12 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form.

7. DescriptionofWork {Replacej \alve 3RCI-tV

8. Test Conducted: Hydrostatic Pneumatic om. press. Other Exempt Pressur% 2L -psig Test Tempb)O__@j Pressure psig Test Temp. °F Pressure _ _ psig TestTemp.

9. Remauds

.~~~~ 7 (Appcae u fantuees Daft Recouds to be attaced)

CERTIFICATE OF COMPLIANCE-We certify that the statements made Infte report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Szbod Stamp MW..A WAh - ,fiP CeW~oftA4 a/} WNo. Expiration Date NWA Date4aeJ / A

>D62 U. .

- CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Ins t St

-eate or Prone of V I CC

• go. and employed by 1-HSBI and I Comian d have inspected the components described in this xnecti.cut Owners Report during the period I/-I-"' to 3- fT34 z- and state tat to the best of my knowledge and berief, the Owner has performed examinations and takedn corrective measures' described in this Owners Report in accordance with the requirements of ASME Code, Section' Xl.

'By signing this certificate neither the Inspector nor his employer makes any warranty, expressed i or implied, concerning the examinations and corrective measures desctibed in'the Ownees ReporL Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

4ncommissions ____

s Signat National Board. State. Province and Endorsements tq Date l - /Z Page 2 of 2

ASME Section Xl Manual FORM NIS-2 OWN EPQRT FOR REPAIRS OR REPLACEMENTS Sectlon E Exhibit A As Req By The Proslons Of The ASM! Code Section X l

1. Owner Address: Duke Power Comoanv is, Date.I l T -

526 S. Church Street. Charlotte NC 28201.1006 Shoot L of .L

2. Plant Address: .0CONAE MCfl.I&AR 9rATTAQN Z8n0 RDG tR 1 iI4 L: Sc -R 29672 2a. Unit: 1 2 Shared (specify Units __

3. Work Performed By;1 Duke Power Comaanv .An- Wnrlenrrfarfi! %S-7

- wen §w

-7 VS15 - No Address: 528 S.Church Street. Charlotle NC 282011008 RepirOfQrdgItIW Job I Type Code Symbol Stamp: WA Authorizatlon No. WA Expiration Date: WA i 3b. NSM or MM #:

4. (a) IdentificationofSystem: 12ew +/-oir C4c0 IQxt 4 4.. (b) Classof Systein I

. }s ~~~ .0_

5. (a) Applicable Construction Code: '2.3 .1 I tF Edition, Addndad- Code Cases (b) Applicable Edition of Section Xl Utilized for Repairs or Replacement%: 1989. No Addenda (1992 through 1992 Addenda for Class MC and CC end their suppors)

6. IdentIfIcation of Components RepaIred or Replaced and Replacement Components:

Column 1 Column 2 Column 3 Column 4 Column Column 7 Column 8 Name of Component Nanm*oo Mf. Mfg. 89dat No. National W No. OthmdenthflalUon Ywr evu11 Ropumd, Replsaed, or ASME Code Stmped A

. . L *,Repaired,

_.  : .__ Re pla ed, n ~ on r o 5 X  !

t6- t l Is *- IT-_ _ 49__ 6 l4 lA_1_ -70 ".Yes Repaired, s

-sR C . eZfOre ssir 9L___ _eo_ tJ/A is-. g! 2 t Yes C . . . . V , . . Repaired, No Replaced,

_ _ _ _ __ ___ ___ ___ _ _ _ _ _ _ _ _ _ __._._._ _. - R e pla ement Yes D Repaired, No Replaced,

_ _ _ __ _ _ _ __ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _.___ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ __ _ _ _ __ Rep la ement Yes E Repaired, No Replaced,

._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - R eplaoem ent Yes F Repaired, No Rep aement Yea Replaced, Paop I of 2 Revislon 7

ASME Section XI Manua( Section E Exhibit A Form NIS-2 (Back)

NOTE. Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this forrn.

7. DescdiptionotWofkw I VI 3Rt- 8CJ disL wai atso rv-flacla . -s/W Bm-r oqq-o

8. Test Conducted: Hydrstatic Pneumatic -r p Other Exempt Pressure -L/c psi T Pressure pS1g Test Temp. °f Pressure s psig Test Temp. °F

9. Remarks I-~ _5 _S (Applicable Ums~xf Data b10rst be &Wl4 CERFICATE OF COMPLIANCE

)? We certify that the statements made in the report are correct and this repair or repaement confoms to the wtles of the ASME Code, Section XlI Expiration Date WA II 0 Date4A /LL.. C I

Z- .. - .-

. ..-SA

- CERTMFICATE OF INSERVICE INSPECTION i 01 1,the underigned, holding a valid otss Issd by tpe Nainal Board of Boilerand .I -m-ja gt i

Pressure Vessel Inspector 3ror Pvince'of wte64o and employed by HS81 and I C w___f___ ha_ Inspected the co onents descabed In tis . II ' - - '.

Ownees Report auting the period IT-f l1 to& - ID d2- aod state that to the bestoftm knowledge and belief. the Owner has performed examinations and taken corrective measures described in this Ownees Report in aocordance with the requirements of ASME Code, Section I XI.

By signing this cerficate neither the Inspector nor his employer mas any warranty, expressed or Implied, concerning the examinations and corrective measures described in the Ow s Report Furtherm6re, neither the Inspector nor his empoyer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

A22= /g &issis VM4 )j?

-ispecWs Signature Nationa Board. State. ProVnce and Endorsements Dated ---

Pazc 2 or 2 Rc'ision 7

Q'0 FORM NhS-2 OWNERS REPOR r`OR REPAIRS OR REPLACEMENTS As Requtred By The Provsons OfTe ASME Code Sectlon XI c

1. Owner Duke Power Company la. Date - 3 Address 526 S.Church Stree C flott,NC 28201008 Sheet ... of I

2. Plant Oconee Nuclear Statfon Address 7800 Rochester Hwy. Sdnecai S.C. 29672 2a. Unit 01 02 3 0 Shared (specify Units )

3a. WorkOrder# Cl85'74i '?09 -C1

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201-1008 .

Type Code Symbol Stamp NIA Authraion No. WA Expiration Date WA 3b. NSM or MM # -

4. Identfficationof i-I l ,k1 ?esUrt- _System_i't'C*M Ca _.a

5. (a) ApplcoeConsWctonCode_ _ 7CL.. 19 a _Editon.____ A_Idendt Code Cases (b) Applicable Edlton of Section XI UWilzed for Repairs or Replacerents 1989, No Addenda (199:2 through 1992 Addenda for Class MC and I

CC and their supports.)

6. IdentIfication of Components Repaired or Replacd and Repla nt Components

_~~Coa I COM _ l W . ,0M 4' fhm5fh , COMI

_ ~Cehimni Coum 8 2 Col n Co'm

- 4 Column Col.S Co= 7n Coltmm8

.Name of Component Nam ofComonet Nameoet Nme f Manufacturer Mnufctuer, Manuacturer Serial Number *National rd Idenittfication But Built redl ASME Code Stamtrntped

__ _ _ _ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ N u m b e r _ _ _ _ _ _ _ _ _ _(y e s or no)

A \/aj A1~ . . ~.___ . . .. 00 Repared r i/A

~ ~ Repalred

_ ~ E _z .e~ . . 3s1 __ P !t,1 f(E aI _ 14a7e3

.L ... eeament r [ Yes 0 Repaired No B 0 Replaced

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ R pla em ntyes, 0

~~~~~~~~~~~~

0 Repaed 0 No C 0 Replaced oRepaired No D 0 Replaced

__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ .__ _ _ _ _ _ _ _ _ _ 0O__R eplacement 0Y es ORepaired 0l No E -  ; . . . O Replaced

_ _ _ _ _ _ _ _ _ _ ___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 0O__R eptacement O Y es ORepaired 0 No F 0 Replaced I ._____ :__;__I_ _ 0 Replacement 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 in.x 11 in. (2) information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7.DescriptlonofWork i&poced chU t-asse~mwj u- inLi ZJAPfK31

8. Test Conducted: El Hydrostatic I Pneumatic El Nominal Operating Pressure O Other

• Exempt Pressure psig Test Temp. _F Pressure _ _ psig Test Temp. *F Pressure - psig Test Temp. OF

9. Remarks X A/ Pit 5fabo63-(Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rugl of the ASME Code, Section Xi.

Type Code Symbol Stamp N/A Certificate of uftrzptn No. WA Expiration Date NWA Signed __POwnrta /,a SiL Date-51s*-aa-

.Ownetfor Owneed Designee, Tite CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of A)Co~h~eAfkQ~iV- and employed by /'A CFr

__ have inspected the components described In thIs Owners Report during the period g/E3 to 273o.3 ; and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

• ~ O ,flJ ~

^mmiccirsnc S.,~ *O-i- Vt:- / 1,/i 9~ AA

- C - - C F speclor's Signare National Board, State, Providence and Endorsements Date -3 S3 L Page 2 of 2 r'

Cf (r

( ill FbRM NiS-2 OWNERS REPORT FOR REPAIRS0R REPLACEMENTS As Required By The Provisions Of The ASME Code Section Xi

1. Owner Address Duke Power Company 528 S. Church Street, Chalotte, NC 28201-1006 la. Date56 3. >05 Sheet '/ of /

2. Plant IOconee Nuclear Station Address 7800 Rochester lty*. Sdnecai S.C. 29672 .

2a. Unit 01I 02 3 OShared(spefyUnts ')

, 3a Work Order # _ , . _

3. Work Performed By Duke Power Company I Repair Organization Job #

Address 52 S. Church Street, Charlotte, NC 28201-1006 Tipe Code Syrbol StarmpfV Authot1zation No. WA Exp1at Date WA 3b. N SM or _ _ _ _ _ _ _ _ _

4. Identification Of Syste1 A&L 6 f Cls / ..

5. (a) Applicable Construction c o 19 M UMo 4 I% da,t 0 fF f //=9; it//3Sde Cases (b) Applicable Edition of Section Xi UlIzed for Reparsh or Replacments 1989, No Addenda 1992 through 1992 Xddenda fof Class MC and CC and their supports.) .

6. Identification ofomponentsRepalredorRplacedandReplacmentComponents Co.ni lotl nn 2 l OW=0 Ot;j 'mn4 l ns l CoOl calmn? Column National r .,. ~Repare, ASME Code Name of Component Name of Manufatu l Boamrd ld"M Year R l SbmEd Serial tumi~or Number ___________ Replacement (Yes or no)

I~~~~~~~~~~~~~Wl l  : IerI nuLe u .I W l Wit R lSOaNOel AAZ7 A-14 ~~~~0Replaced CRepa*rRj No

_____________ _____________ _ ______________ - 0O__________

Replacement 0Repaired NYes

_ __ __ ___ _ __ _ _ _ _ _ _ _ _ _ __ ___ _ __ __ __ ___ __ _ Relace mentpOe Yes ORepaired F Repiacd ONo

__ __ __ __ __ __ _ __ _ __ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ -0 Repl ai r e metd_ _

F O Replacedet

~~~~~~~~~~~~~~~~~~~~~~~~0 Replaced 0 Yes

_____________ _______ - 3 Replacem ent 0 yes

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 112 in. x 11 In. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

RUi~regH3- 4IS-1~ ~~ EV

7. Description of A Fork

/9

/L2 /6 ZA) AA *1lAW I

8. Test Conducted: El Hydrostatic [ Pneumatic E] Nominal Operating Pressure Xother [ Exempt Pressure 5!A ° psig Test Temp. / 5 OF Pressure _ _ psig Test Temp. OF Pressure _ _ _psig Test Temp. OF

9. Remarks 7je~2~nE~b Ii-517 / TheA1--- 6Se-e1 ?

(Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp NMA Certificate of Authorization ty~wA XcExpiration Date N/A S 76./rz' 4 """ D 2 2 ./gC'7!5/t Date 530 0--

Owne Uesignee, Ttle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Providence of Go 0 and employed by a'y' have inspected the components described in this Owner's Report during the period AO/.'

to J 6? : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report Inaccordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions A//lk1lerlA"4 Inspector's Signature National Board, State, Providence and Endorsements l Date E/2z/0 I Page 2 of 2

C C ~~~~~~~~~~~~~~~~~~~~~~~~~~

(

FORM NiS-2 OWNER'S REPORT FOR REPAIRS'OR REPLACEMENTS As Reqired By The Provistons Of lte ASWE Code Section Xi

1. Owner Duke Power Company . , im.Date ___ ,__

Address 526 S. Church Street, CMal , NC 2820-100 Sheet Z of /

2. Plant IOconee Nuclear Station Address 7800 Rochester VIwy. Sfneeai 8.C.. 29672, 2a. Unit 0i 1 02 ,L 3 0 Shared (specity Unts. )

3. Work Performed By Duke Power Company .1 I 3a. Work Order# F&7-YE-501"le

- Repalr Organzatilon Job #

Address 52 S. Church Street, Charlotte, NC 28201.1008 Type Code Symbol Stamp WA Authoraton No. WA Expton Date WA 3b. NSM or,. /7/k

4. Identfication of S3steml 3 £ / 1J 3F T / / s s6

5. (a) AMncable Constructlon Cod/ WI 1a E//dllz3o5&3 1863 (b) Appliable EdtIon of Section XI Uilized for Repais or Replacements 1989, No Addenda (1992 througif 1992 Addenda for Class MC and Ae /d9 / Code Cases CC and their supports.)

6.Ident"fCatlon of Components Repaired or Replaced ann __ __ _ _ __ _

_Cotumen

5 it Cotmnm2 . ColumnS l Coum4 Column5 COL o Col nS

_ , .  : t . . .  : Manu act r er l :ti .

Ba rd .d.nt. :cstonal.o ,R: Re Ied, ASME Code Name of Cormponent Name of Manufachter l Nualumem ber oom _ _ Year Repacet ltyeeorno)l SE:$+& n Cs~ o 9-S 3 A /Z Z?

R A . :R epa red 0 No' A . .  :  ! ' .  :, f . _ a :ORepaired R

Replaced ONo O Repafred 0 No

.0.

0 O R O RepaCred ONo D y es E) . 0 . . . S _ O ReplacednenF Yes F w .  ; . _ 8 O Repabred 0 No

~~~~~~~~~~~~~~~~~~~~~~~~Repa ONo F I 0 Replaced

_ __ _ __ _ _ _ _ __ __ _ __ _ _ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 0 Repla ce me nt 0 yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 In.x 11 in. (2) InformatIon in items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

kR'-u,6AAZ -.;'1 -72irec~sp~W 6--. &J S.

7. Description of Work

8. Test Conducted: El Hydrostatic [3 Pneumatic El Nominal Operating Pressure TOther Il Exempt Pressure _ ___psig Test Temp. 0 OF Pressure _ _ psig Test Temp. OF Pressure ___psIg Test Temp. OF

9. Remarks IA]- 5/71r&~  %~s ~-~~

&;~e (Applicable Manufacturees Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp NWA Certificate of Authorzation A Expiration Date W/A

¢f 2geiz( <;§ Date ,

Slgne~t z2 ._A _ A .0 < ._ -

uwner o~*wnrs uEsignee, I wde CERTIFICATE OF INSERVICE INSPECTION 1.the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Providence of BAas es Ad and employed by esm C7-

-___________ have inspected the components described in this Owner's Report during the period .X/2o/oi to &&-/o3 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described In this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

Commissions -Vcc.16LILA2MLC, Inspector's Signature National Board, State, Providence and Endorsements -A1 Date -L21103 Page 2 of 2

( FORM NIS-2 OWNER'S REPOC rIOR REPAIRS OR REPLACEMENTS (

As Required By The Provisions Of The ASME Code Section Xi

1. Owner Duke Power Company la. Date 5- al - C)3 Address 526 S. Church Street, Charlotte, NC 28201-100 Sheet I of L_

2. Plant Oconee Nuclear Station Address 7800 Rochester Hwy. Snecai S.C. 29672 2a. Unit 0E1 02 Shared (specfy Units 0O13 3a. Work Order # q 9 5 1L a&SI I-°

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S Church Street, Charlotes, NC 28201-1008 Type Code Symbol Stamp WA Authoftlon No. WA Expiratlon Date WA 3b. NSM og j 1t759 c

4. IdentificationofSystem lath P tsT~ e+ ea .

5. (a) Applicable Construction CodeS 19S Edition.__ _:__ Addenda - Code Cases (b) Applicable Editio of Section XI Utiflzedfor Repars or Replacements 1989, NoAddenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identification of Components Repalred or Replaced and Replacemep Components __*__1._,.

Cotumn 1' Cohlun 2 CO;N Cohmn 4 Cohlmn 5 C. 6 Cmn 7 Column8 Name of . t ~ ~ Manuf act ur er Nati onal Repaired , AS ME Code

.Name of CopnA Name of Vlle 0 Seral NmBr . Bnr dnfl Identificat.on ul Built Re~p2 ar Stme A Vlalle- 0- Anchor Darlin 3 -Repaired No 3HIP - a I gMixpri'ses, 3c. \Va 3 (xI jqqq O-Repfacement 0:TYes ORepaired ONo B  :

_ _ _ _ _ _ _ _ _ _ oR e 0 Replaced cem pla en t 0Y e s

_ : . . _ Replaced Repalred X~~~~~~~~~ ~ El No

~~O D_~ _ _~ ~ ~ ~ ~ ~ ~ ~ ~ ~~ ~ ~ ~ ~ ~ ~ ~ ~

__ __ _ __ __ __ __ _~_ _ _t Re o No O__~E Y es O ReplacdN E .0O ~~~~~~~~~~~~~~~~~~~~~~~~~0

- ReQlacent Replaced 0 Yes ORepared116n ONo 0 Yes F ..  : . 0 Repaired 0No O ~~~~~~~~~~~~~~~~~~~~~~Replao

_ .  : . I  : O O Yes

~~~~~~~~~~~~~~~~~~~~~~Replae F Q Replaced E Yes Page Ilof 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 in. x 11 in. (2) information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Descripton of Work'n IlcceA bail ,n " t al(I \ IQ I\JQ 3 P - a I

8. Test Conducted: El Hydrostatic El Pneumatic El Nominal Operating Pressure El Other Pressure _ _ psig Test Temp. OF Pressure _ _ psig Test Temp. OF Pressure _ _ psig Test Temp. OF

9. Remarks k)/.

IA N 5:29 fos-3 (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforns to the rule of the ASME Code, Section Xl.

Type Code Symbol Stamp NIA Certiflcate A, ofulhorA Expiration Date NWA Slaned-fq10 /6 C GaxLd-Q+/-A Owner or Owners Designee, TUe CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of A Jo ',QG o& - and employed by A ?A'L57

-___________ have inspected the components described in this Owner's Report during the period Gha 1 nY to r/a3  : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

- %q _^ -- Commissions ,&0 S~c Z, liipectors Signature National Board, State, Providence and Endorsements Date o,4.3 Page 2 of 2 I

FORM NIS-2 OWNER'S REPOFC eOR REPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASME Code Section Xl

(

1. Owner Duke Power Company la. Date Vf'1.63-Address 52B S Church Street, Charlotte, NC 28201-1008

2. Plant Shee .L of IL Oconee Nuelear Station Address 7800 Rochester tWy. Sdneca: S.C. 29672 2a. Unit 02 0 Shared (specify Units )

3a. Work Order# -15(1 ( L I - aI

3. Work Perforned By Duke Power Company Repair Organization Job #

Address 528 S. Church Strbet Charlote, NC 2821.1008 Type Code Symbol Stamp WA AuthorIzation No. WA Expiration Date WA 3b. NSM CjRI 9'

4. IdentifIcation of S!i0 Class__ __

5. (a) Applicable Conshtrulon Code Asn S" .- 1i989 EdltImn Atd.denda, ' - _Code Cases (b) Applicable Edition of Section XI Utilized for Repirs or Replaceme 1989, No Addenda (1992 through, 1992 Addenda for Class MC and CC and their supports.)

6. Identification of Compmnent Repaired or Replaced afd Replacement Components

_~ ~ ~ C_ohahfmniI C;ft~flm 2 Caoy 2.

CotumnS

.7 Ootur nn4 CA M 4 Coh mtnt 6i OI u mn C.ol m n.

Name of Component Name of Manufacturer ManTacturerNatilonal Repaired, ASMVE Code 1/ MN r me derflcaflon Built R Stmped

__ _ __ _ _ _ _ _ __ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ N umb er _ _ _ _ _ _ _R pa e e t (yes or n o) kI~ -1a ElRepaired A7 Ar cJTrworI n0-- 0 Replaced S1p-_I_ .__._ - . OReplcmnt OYes ORepalred a 0 Replaced C. .  ;: : . . t  : 2 R m 2 ~~~~~~~~~~~~~

C . . .EO Replacement d Yes DX i . . . . ~~~~~~~~~~~~~Oflepaired O No E : X- - l . = ~~~~~ - D2 ;=

opt -D:. ,0 POge uo0fyes E F . 0 l: Oflep~~~~~~~~~~~~~~~~ired l = - OOlo~~~~~~~~~0o Rep a e No O~~~~~~~~~0

_ __ _ _ _ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - O~~~ect ac eme t C Yes

~~~Repalred, 0 No OfReplaced Page Ilof 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work RwpaCeA beLUl l'i Z'n aI \JfiIVr v e 1l P -

8. Test Conducted: E Hydrostatic El Pneumatic El Nominal Operating Pressure [1 Other t Exempt Pressure _ _ psig Test Temnp. _F Pressure _ _ psig Test Temp. OF Pressure _psig Test Temp. OF 9.Remarks ~JIK\ M~1 a9I6_,

(Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Au orlzatf I9 o. N/A Expiration Date N/A Signed P1 I() C Date_5 -)_ 02 e Owner or wners D gee, Te CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the Naftional Board of Boiler and Pressure Vessel Inspectors and the State or Providence of God Gow and employed by o i '

have inspected the components described In this Owner's Report during the period s-15!06 to .LUTZ?  : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied.

concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

r'^mmit&eir~nc A Jl'

,- = _ -

Inspector's Signature National Board, State. Providence and Endorsements Date aIA0/@

Page 2 of 2

I II( ASME Section XI Manual FORM NIS-2 OWNJA?. .PORT FOR REPAIRS OR REPLACEMENTS As Required By The PsMtons.01 The ASME Code Section XI

, Section E E1 *iT tA

1. Owner Address: DukePowe ' ' I la. Oato.ZLO/

l~~1 628 S.Church Street. Chalo~tte NO 2820I1.1008 Sheet oft /

2. Plant Address:.

~80~f ItTER 10 FIRSECA, S C,, 29672 2a. Unit: 1 2 V Shared (specify Units . r

3. Work Perlormed By. Puke Power CorDenA ' , ,3a. Work Order#:_ _ _ _ _ _

Address: I ' 52 S. Church Street. Charlotte NC 28201Q1008 .* .r .

Type Code Symbol Stamp: W 'Authorization e: , r . NSM or MM #:,

4. (a) Identificallon'of §ystem: '2 4..>, (b) Class f Syst,

s. (a) Appiable Coonstruction ode tio, Addnda, __._ CodsCasos (b) Applicable Edltlon of Section Xl Utilized for Repairs or Replacements: 198t o adde (1992 through 1892 Addenda for C!ass MC and CC and their supports)

6. IdentIficatIon of Components Repaired or Replaced and Replacement Components:

Column 1 Column 2 Column 3 Column 4 Column 6 :ol 6 Column 7 Column 8 Name of Componenlt Hem of Mfg. ' Mg. 8tdrl No. NhilonaliBord No. Other Idntificaton Yner BuNt Repaired. Replwd, ov ASM5 Code ftn A ;e// A 3

_: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  : _ . _ _ . _. Re pl ac mn t Yes et)

B , . ,. . . . _ Rep rd, No.

Replaced,

_..:: Replacement Yes C . . \ . :.  ::;  ; . y . .; . - @: RepaIred, No

.. ' - .; . .* t _ . Replaced, D . -

. Qv  ;:

4 Repaired, R e place m nti t No Ye s Replaced,

_: .  :; _ ~~~~~~~~~~~~~~~~~~~~~~~~~R Yes FE - Repaired, No:

. . : . E .. . . . . ~~~~~~~~~~~~~~~~~~~~~~~~Re

- . - . Replacement Yes F r . . - - Repaired, No Replaced,

__ _ __ _ __ __ _ __ _ __ __ ___ _ __ __ __ __ __ __ __ __ __ __ _ .___ __ __ __ __ __ . , -, Replacemen t ; Y es Pop I @2 QsVlelAR 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) informnation in iternsl through 6 on this report is included on each sheet, and (3) each sheet is nunbered and the number of sheets is recorded at the top of this fomi.

7. Descnption oWork 7e7'z&5eO &VC7A)4 +.* LiT )OAJCS O2A)62 rZ4W5:'A/,VOZZZZ A16i. IC' ~E 4'o0&7XA) ,g:- 401:;

8. Test Conducted: Hydrostatic Pneumatic - P Other Exempt Pressure Zf5 jpsig Test Temp A4'& 17F Pressure j psig Test Temp. OF Pressure .psig Test Temp. Of

9. Rernadm

• -111drV,

• - -,< I/ ..< Z,=s4iol t

I C= ' I r ~-

-jA-X - -~ - * -

- r7t?

(Applicable ManUfaclre$ Daft Records io be attachd)

CERTIFICATE OF COMPUANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Secton X.

Type Code SblSap9 .

Expiration Date S sigg g j ;i9 \ k[ate /LL. 20k2; CERTIFICATE OF INSER VICE INSPECTION I, the undersigned, holdrg a vad c ssion ss by the Natinal Bad of Boiler and. 1*

Pressure Vessel I HSBI and I Co mcaXVC0 Connectct haveispeced e components described Inthis ployedtb aml epmsteorPvn 1.- ,n S .

Ownees Report iuring the peiod 9-o-o to A ,-24 and sase tat tothe best of my .:t  !

knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Ownees Report in accordance witi the requirements of ASME Code. Section By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, oonceming the examinations and corrective measyres described In the Ownefs-Report. Furthermore, neither the Inspector nor lis emplye shall be liable In any manner for

any personal injury or property damage or a loss of any kind arisig from Or connected with this inspection.

Commissions A-£*% ' U InspectoesSlatK National Board. StWe Provce and Endotsements Pac 2 of 2 Rcevisio 7

ASME Section Xl Manual

._ Section e Exhibit A

- '( FORM NIS.2 OWNE REP0F5T FOR REPAIRS OR REPLACEMENTS As Required By The Provison.0 The ASME Code Sectlon Xl . .

1. Owner Address: Duke Power Company l a. Date v- az 526 S.Churh S NC 28 200 Sheet Z of/

2. Plant Address:

~800~fleTT 2TWJ I -tRRN  : S-G 29672 2a. Unit:, I 2 , Shared (specify Units

3. Work Performed By: Duke Powe! Comoan fa Work Order #:_

Address: 526 . Church Street. Chartte NC 28201=1006 II Ift"pItr we:Ioeg Job' Type Code Symbol Stamp: M Authorization No. tW Expiration Date: WAL 3b. NSM or MM #: .: :.

4. (a) Identification of System:

• 4. (b) Class of System:

5. (a) ApplicableConstructIon rue Code: o r / Edition, Addenda, - Code Cases (b) Applicable Edltlon of Section Xl Utilized for Repairs or Replacements: I gag No ddenda (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of Comporients Repalred or Replaced and Replacement Components:

Column 1 Column 2 Column 3 Column 4 Column 5 001-6 Column 7 Column 8 Name of Comnponnri, Name of Mfg. Mfg, Seiul No. Nateoal Board No. Otier Identloetlo"i Year uit aPalved, Replaced. or ACME Coe Stemped Resoitelent (yes or no)

-3A A~i i S36- /ZX eI Repaired, No s~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~R eplac BM&KY J 0 T. 0 Repaired, . ..

No Replaced,

-, Replacement Yes C . . . . . . Repaired, No Replaced,

.- : Replacement Yes Repaired, No Replaced, F _____________._ Replacement Yes E ~~~~~~~~~ ~ No

~~~~~~~~~~~~~~

Replaced,

- Replacement Yes F Repaired, No Replaced,

- Replacement Yes t

I.~~~~~~~~~~~~~~~~

I of 2 ROVIulon I

ASME Section XI Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of fists, sketches, or drawings may be used, provided (1) size is 8 112 in. x 11 in. (2) information in itemnsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Wo.k-c 7'-,4nL v) Afkcr A) <3>4 do/CE r)2b ~Xf)o J!4AA)1I) aAre

8. Test Conducted: Hydrostatic Pneumatic'- Nom. Operating Press. Other Pressure psig Test Terrp. G -F Pressure psig Test Temp. OF Pressure . s pe1g Test Temp. . _OF

9. Remarks (Apprlcable MwfcudsData Recocds to be atached)

CERTIFICATE OF COMPUANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Syjc Stamp WAM Certificate ofNtho lNo. WA Expiration Date N/A Signed 4 IJ C DateŽ3-CERTIFICATE OF INSERVICE INSPECniON 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Ins h te or Province of ilA ZIoA- and employed by HSBI and I Comp aConnecticut have Inspected the components descrbed in this Owner's Report iuring the period I/AL-7_dL to . t2p=: and state that to thebet of my knowledge and belief, the Owner has performed emnations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in the Owner's Report. Furthermnore, neither the Inspector nor his employer shalt be iable in any manner for any personal injury or prope damage or a loss of any kind arising from or connected with this inspection.

____/ _______ Commissions b 9 5_

tnmspecto's Signature Natinal Board. State. Province and Endorsements Date Page 2 of 2 Revi-ion 7

1r ",

ASME Section Xl Manual -FORMNIS-2 OWNt i0 RT FOR REPAIRS OR REPLACEMENTS . Section E Ei6it A A Requred ByThePirslos0The AIode Seot)oI

1. Owner Address: la. Date oZ 526 S. Church Street. Charlotte NC 28201.1008 -:I Shoot I of /

2. Plant Address: acafnzR MTrG.ZAR FTAqTnCNI M~8O RD11W, SZHo~fA -S0 29672 2a. Unil: 1 2  ; Shared (speolly UnIls

3. Work Performed By. uke: PyrCoMpenj , *. 3a. Work Order #: Yff OF 0779 Address: -' 526S. uwhStree. Chrotte N28201.1006 :I. o"kap*or*.r nJbI Type Code Symbol Stamp. WA Autholzatlon.No ,Axptration Date. A, 'ob. NS or MM #: __._:-

4. (a) Identification of System:

• Xg !dob Class of System:

5. (a) Applicable Construction Code:

(b) Applicable Edition of Section Xi Utfllzed fof Repairs or Replacements:.

f Edition,4 Addenda, h4(

(1992 through. 1992 Addenda for Class MC and CC and their euppoels)

CodeCases

• 4

6. Identificalionot0Compofients Repaired or Replaced and Replacement Oomponents: i i

Column 1 Column 2 Oolumn3 Column 4 Column1 Colunn7 Column 8 Naim* o1Component .ame N Mfg. Mfg, 8tdl No9: Naa'i Bwd No rtwimlotic. Yer ull? Rpud Re , o ASM , Stamped

,s - * . .VA:k .t 6 ~ .. ~ ,. aR t- n

. BUAT

.; . .  : . e. O . Rsphoet, *~~~~~~~~trub X Repaired, l ,0 7No77

.4 ~~~~~~~~~~~~~~~~~~~~~~~~Re

-  : Replacement

... Yes c _ ~-. _ - . g Repaired. 7 No

__ __ __ _ _ _ _ _ _ . _ _ _ _ _ __ _ _ _ _ __ _ __ _ _ _ _ _ _ ._ _ _ _ _ _ _ _ _ _____. _, __, _. _ Rep lacement _ Yes D, .  ; v t .  : Repaired, No Replaced,

___________________ Re slacem ent Yes ED- . l . 0 . . Repaired, No Replaced,

.__ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ ,____________________ . _________________ . _________________ . __. _. _. __. _ ,I_ Replacem ent Yes F .. . . - . . Repalred, No Replaced,

- . .  : .Replacement Yes Pop I o$2 QWAlM I

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back) I NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 112 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. - / / 5gJ4'6 *

7. DescrptionofWork .P:A C4r 0A A)OZkIPL/ T 6S nAX b) \

A~ S ~

u O/OZZ> ~ ~ ~ ~ ~ ~~~,M D D-S- 0 V-

8. Test Conducted: Hydrostatic Pneumatic - N Oe aress. Other Exempt Pressure________ Test Temp.4d/./1F Pressure ps1g Test Temp. °F Pressure -psig Test Tenm. . F 9.

$1,4. - 507?

I I I 0 I (ApplicaUq Manubckxes Data PACords 10 be aftadled)

CERTFICATE OF COMPLIANCE We certify that the statements made in Me report are correct and this repair or replacement conforms to the rules of the ASME Code. Section XL.

Expiration Date WA I DateAW.// . 9 CERTIFICATE-OF INSERVICE tISPECTION 1,the undersigned, hokdrig a valid com o Issdby the NitnadBoardofBoiler and Pressure Vessel If ive§ts or PNvice of W-W7O and employed byi SBI and I Co&3Mny a Connectlcuthave _nsecteddbe components descrid his Owne's RLeport iuring the puiod A. La-2. to3 sand state that to the beit of my knowledge ad belief, the Owner has performed exanmnations and taken corrective measures t descri in this Ownee's Report in accordance with the requirements of ASME Code, Section, Xi.

By signing this certificate neiter the Inspector nor his erployer makes any warranty, expressed or inpued, concerning the examinations and corrective measures descnioed in fte Ownees Report. Furthermore, neiher the Inspector nor his emplyer s be liable In any mannrer for any personal injury or property dmage or a loss of any kInd arising from or connected wih this inspection.tk//

Commissions .

inspectoes Signature National Board. Stale. Province and Endorsements DOatee Pz-c 2 of 2 Reviscion 7

OWNE~~~~ar "I- aJON

( _$.SME Section Xi Manual FORM NIS-2 O T FOR REPAIRS OR REPLACEMENTS Section EExhliib A As Requlted ByThe PUlIons Of The ASMS Wode Sooton II

1. Owner Address: Duke Power Comoany - la, Date lZ-/?'-O /

526 S. Church Street. Charlotte NO 28201.1t00 Sheet / ol /

2. Plant Address: CICONEE M~,A q1'ACTMO .'

1.800 ~fROGUEZZIRw irJV SERflA, -q-C 29672 2a, Unit: 1 2- .Shared (specify Uniip *1

3. Work Performed By: Duke Power Companv . S

~a. Work Order I : 49901~ %7e~

Address:: 526 S. Chumh .N -I- ovgs1*q~t ~Job 11"If~~.pt I Type Code Symbol Stamp: t Authorization NoA Expiratlon Date: Wb. NSM or MM #:

4. (a) Identification ol System: - (b) Classofytem /

5. (a) Applicable Construction Code:4 Editloin, Addenda, Code Cases (b) Applicable Edition of Section X Utilized for Repairs or Replacements: 989. N° Addenda ;(192 through 1992 Addenda for Claus MO and CC and their supports)

6. Identification of Qompodents Repaired or Replaced and Replacement Components:;

Column 1 - Column 2 Column 3 Column 4 Column 6 Col lS C0olumn 7 Column 8 Name I Compnenl - Name ol Mfg. Mfg. Meal No. Natonal Board No. Othorld"nttflotn Year BuYt Repired, Replae or A$M Coode 8sted

.Pd ,_., :_'_-____._ ______'z

. -Q~ ' . a Repaired, No Replaced,

__ _ _ _ _ _ _ _ _ _ _ _ _ . __ __._ _._ _ - R eeLagem ent Yes

. s Repaired, No ED Replaced, Repaired, No Repiacement Yes

.. ~~~~~~~~~~~~~~~~~~~~~~~~Rep

. _ . . 1 _ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Yes F .,. .Repaired, No

, . . ~~~~~~~~~~~~Replaced,

_ . . ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Revieoerent Yes Pgp I of 2 lpO." I

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches. or drawings may be used, provided (1) size is 8 112 in. x 11 in. (2) infomnation in items1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. - / Y I- /~ # /StS

7. Desciiption ofWouk FoPXP0 &Z7TIA) k Ak OA) e~M F-ZAIrCA) AtZZ 9r- 4$ D

8. Test Conducted: Hydrostatic Pneumatic N or ess. Other Exempt Pressure psig Test TempAl7F Pressure . psig Test Temp. °F Pressure . pssg Test Temp. °f

9. Remarks rEi 4 ./Z 59

)~~~~~~~~~~~~~~~~~~.

I (AWpac"e ManUbfactUftu' DataRcds to be aftaed)M C MFICAW OF OOMPEANCE We certify that the statements made In the report ar correct and this repair or replacement conforms to the rules of the ASME Code, Section XL Type Code S~dStarmp^

Certificat of IcI . / Expiration Date WA I Signtd. (t#/fir/Sv

, V-w~kegrme

& Date

Tf

/

- CERTIFICATE OF INSERYICE ItSPgCTION .

f I I, the undersigned, holdig avad co issn ied by t Nainal Boardof Boilerand . I Pressure Vessel IQ£ d ,State or Provnce of L ,+/-2t _and employed by I Coronmpanvf SYa havected ffe components descbed In this Ownees Report durng the peiod = to .+/-jfzIi2-a state that to the beit of my' knowledge and belief, the Owner has performed examinations and taken-corrective measures described in this Ownees Report in accordance with the requirements of ASME Code, Secon.

Xl.

By signing this certificate neither the Inspector nor his employer makes any warrantyr expressed *c ..

or implied, concerning the exarminations a corrective descrid s in the Ownees' Report Furhernmore, neither the Inspector nor his employer shalt be liable In any manner fo.'

any personal injury or property damage or a loss of any 1ind arisig from or connected with this inspectbn.,

60 CONTuCissions _ _ _ _ _ _ _

I'.Nata Board. Stae. Province and Endorsements Pa-c 2of 2 Revision 7

ASME Sectidn XI Manual FORM NIS-2 OWt cPO)T FOR REPAIRS OR REPLACEMENTS Section E EXhIbIt A As Required By The P sloN Of The ASM! Code Secion X

1. Owner Address: Duke Power Comoanv . Ia. Date.a-t:> /

528 S. Churgh Street. Charltte NQ 28201.10 Sheethot /of /

2. Plant Address: 00ONRE NlT~tT.VAR .qTATTON - -. 1 a~800 ROCHES=1~ MM, SENErCA- .q ( 29672 2a. Unit: ,1 2. Shared (apecify.!nIts ,

3. Work Performed By eI 13a. Work Orderi:0f: 9_-9189: 7 Address: 528 A.Church Street, Charlot NC 28201.100 1q~re v*%0"~j*1 Type Code Symbol Stamp: N Author!zton NP. N Expiratlon Date: WA . '3. NSM orfMM #:, , . . .

4. (a) Identilflatlonol System: 1? am 4., (b) Class of System:

.5. (a) ApplicableConstruction Ci. Addanda, __ __ _ Code Cases (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements: No Add9nds (1882 1899 through 1992 Addenda for Class MO and CC and their supports)

6. IdentIfication of Comporients Repailred or Replaced and Replacement Components:'

Column 1 Column 2 Column 3 Column 4 Columc 8 -Column 7 Clm Column6 6 Coun column8 Ns. o Compof.nent Name of Mfg. Mfg, Sedal NO, Nonal Board No. Qldt Idafltao, Yer BOV l Rpelod, Rvplaoe or ASMS CodeSta APe17 ZD"9;' - 7~ ____ _ vn Z'9 Yes 8 . . . . .  ;. . Repa , *F/1 W o I

,Replaced,

-. Reclaoement Yes C 7 Repaired, 7 D7 v No

- . RReplcement Yes D . ' . 0 Repaired, No Replaced,.

. _ _ _ _ _ _ _ _ _ _ _ _ _ _ ._ _____:__ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ __ _ _ _ _ __:_ ___.__ _ R ep la em ent Y es E X . . t  : .; RepaIred, No Replaced,

- . Replacement

\ ] Yes F - Repalred, No Replaced,

- , -Replacement

. Yes p . I Par. I ot2 3pAl,,a

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in 1ormn of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. ,, 4rJ j 1 A/

7. Description of Work VEP9LAO &OZ:77@A) d-SPZIE kJA)6 ' VM FrZA'c AI LA& -t'V Z? (* '7o-°) R

8. Test Conducted: Hydrostatic Pneumatic Norn PrePress. Other Exempt Pressure s 1 psig TestTemprrq*4*;*F Pressure psig Test Temp. OF Pressure . " psig Test Temp. OF

9. Remarks -7 (ApriUcame MaufAce~s Data Recordst be attwhed)

CERTIFICATE OF OOMPUANCE T We certify tat the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Secton Xl Type Code Spnbot Stampp De Etkau g( N ~~o. ,J9txiration i Date LV S i - - - , I Pressure Vessel I CERTIFICATd OF INSERVICE INSPECTION I the undersigned, holding a valid cornlissior bsse by the National Board of Boiler and.

rs or ProBce ofo Y1e and employed by

.1I HSBI and I Corpa; Mriect have inspectedthe corponents desibed in tfis Owneeskeportiw ngtheperiod to 3 16-a-c andstate thatto thebestofmy -.-

4 knowledge and belief, the Owner has performed examninations and taken corrective measures described in this Owneres Report in accordance with the requirements of ASME Code, Section Xl -.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examations and corrective measures descrbed in the Ownees-Report. Furthermore, neither the inspector nor his employer shlb be liable In any manner for any personal njufy or property damage or a loss of any kind arising from or connected with this inspection.

____________ Comrnissons_ _ _ _ _

lrspectes Signatwre Naftional Board. State. Province and Endorsements 3

Oate '3 OOL.

Pf:c 2 or 2 Rcv.ain 7

ASME Sectron Xi Manual FORM NIS2 OWN-(d RPQT FOR REPAIRS OR REPLACEMENTS Secton EExhibit A As Reqtilred By The Plons Cl The A8ME Code Se10on XI I. Owner Address: Duke Power Comoanv la. Date l__z____

528 S.IChUrch'Strelt. Charfoloe NO 28201.l006 Sheet /. or /

2. Plant Address: QGONrR ?NTY('T.V'AR SIPATTOK 800 nn'R.q~wR 1 kf r, 29672 2a. Unit: I 2 eV , Shared (specify Vnlt-

3. Work Performed By: Duke Power Co~manv :3a. Work OrderJ:,

Address:: 526 S.Chumh Street.-Charlotte NO 28201.1008 R,,eo0guu*,dtnqb I Type Code Symbol Stamp: WA Authoration xpratlion Date; WA 3b. NSM or MM#: _ _ _ _ _

4. (a) Identlilcatlon of System:  : (b) Class of ystum

5. (a) ApplicableConstructIonCode:Z / Edition, _Addenda

. Code Cases (b) Applicable Eitlon of Section XlUtilkzed for Repairs or Replacements; 1989. I2 Ad d (192 thromuh 192 Addenda for Class MC and CC and Ihelr supports)

6. Identification of Compofientl RepaIred or Replaced and Replacement Components:

Column 1 Column 2 Column3 Column 4 Column65 ol06-Column 7 Colun 8 Name d Cofponnt Nammof Mfg. Mfg. 80e1,i No. Naulonal Savad No. OllwIdetlflttlon' Year 8ult Repai4 Rlpeoed, or ASME 09 stmped

_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~P*Mn f ^mnor"01 (Y A fS 5 . 8 7.0aP.Zn e

• R~~otaeein B;5YseY ee

.F~ _ _ _ _ _ _ _ . ./~

. 4

• z . _ Repaired,m n $ .lt Noe Replaoed,

_ . . . . - . . Replacement Yes Repaired, No

. . .. . s . . . .-: , Replacement

~~~~~~~~~~~~~~~~~~~~~~~~~~ Yes F'- . . 7 7 Repaired,

. .s No Replaced,

__________.____. ___ Replacement Yes E . Repalred,. No Replaced,

. - ., Replacement Yes T Repaired, NO Replaced,

- Reblacement yes Pae hp Ilo012 otm2

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Descnption of WoPk O IA)

8. Test Conducted: Hydrostatic Pneumatic - Se Other Exempt Pressure a~S~pslg TestTe mpA*!2rF Pressure psig Test Temp. °F Pressure -. pslg Test Temp. °F

9. Romals_§ 4/Al'. 5'//_*~i (AppICate Manufacwweus Data Recoa dsob. attactdw I

CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and tdis repair or replacement conforms to the sules of the ASME Code. Section XL Expiration Date NWA Datj ". 492c2

. r CERThFICATS OF INSERVICE INSPECTION 1.the undersigned, holding a valid commission IssU~dby the Natin Board oBoler and .

Pressure Vessel Insp - ate or Province oftUI EAve* amd employed by HSBI and I Compan oft o C c have ispected components described in Owner's Report during the period At -O3 to_3^--0. and state that to the best of mrY knowledge and belief, the Owner has performed examinaftirw and taken corrective measures i described in this Ownees Report in accordance with the requirements of ASMI Code, Section 4 XL By signing this certificate neither the Inspector nor his employe makes arny warranty, expressed T 1E!-,

or implied, conceming the examinations and coece measures described in the Ownes' . i::

ReporL Furthennore, neither the Inspector nor hs employer shall be lable i any manner for any personal injury or property damage or a loss of any ldnd arising from or connected with this inspection. -

_ _ _ _ _ _ _ _ _ _ _ _ _ _ Comm issions V 4 &

inspectoes Signature Naiora Board. State. Province and Endorsements Date Pavc 2 of 2 Rcvimon 7

-Xki.Sectlion XI Manual FORM NIS.2 OWNERS REPORT FOR REPAIRS OR REPLACEMENTS Soction E Exhtbit A As Reauired By The Prkslmns Of The ASMB Oods 8secton XI

1. Owner Address: Quke Power Com'a a. Oate /s a w 528 A.C~hurch Street. Charolote NO 28201.1008 Sheet-.Lol .

2. Plant Address:

,l800 Hn=-q='R~MCL -N=tA- .qa! 29672 2a Unit: 1 2 ) Shared (speocIy Units __ _

3. Wo erformed By: Mt Power Comoy .. WorkOrder#:

Address: 52 S. Church Stret Charlotte NO 28201.10 rlIr9qtommfltumJob U Type Code Symbol Stamp: A'l Authorzaln No. pralon Date: W ;3. NSM or MM#

4. (a) Identificatlon of System: (b) Class of System:

5. (a) Applicable Conptructlon Code: ,, "d97lln, .  ! Addenda, C'ode Cases

-(b) Applicable Edltlon of Sectilon Xl Utlzed fdr Repalrs or Replaements:199No nda (1992 throh 1992 Addenda for Class MC and CC and their suppots)

6. identlficatlon of Componients Repalred or Replaced and Replacement Components: .

__ Column 1L Column 2 Column 3 Columnn 4 Column5 Colt Ll Column 7 Column 8

_Nam 0l Corroen Nam el Mf :g. Mg oel NO. Natonal eoard No. wr Idenviiiioon Year BuIlt Repaired, Replaed. or ASME ¢ods ftaped D~e 6v e A 78.f/)/ v 'A5< .t Mts...

8 < 0.l; 0 . l i .. /W N

~~~~~~~~~~~~~~~~~~~~~~~~Replaced

_ f F. F . .r .S.. ,,.1 r .  : . _ - _R. ement Yes D E  :-: . . . . . .~~~- Repalrod, No

. ;; .  ; 9

. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Re

~~~~~~~~~ ~ N

~~~~~~~~~~~~~~~~~~

_ : . .  ; Rephecemenl

.~~~~~~~~~~~ ~ ~~~~Yes .

D .- Replacedete Repaired, . No

~~~~~~~~~~~~~~~~~~~~~~~~~Replace

~~~~~~~~~ ~ ~~~~~~~~~~~~~~~~~~

No F.

1

__._ _: _ _. Re pl ace m e n t Ye s

. . . . . . ~~~~~~~~~~~~~~~~~~~~~~~Replacect,

___________________ I_______________

___________________ - R eplacem ent Yes F *Repaired, No Replaced,

- Replacement Yes Pop I o1`2 Rpvlqta, 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3)each sheet is numbered and the number of sheets is recorded at the top of this form. / Y LS ( / .;J7 gAJ s.)

7. Descnption of Work j )  ?,&'/A 5 CW /K w f~~g/OZX/0w3AeZA470) D-a

8. Test Conducted: Hydrostatic Pneumatic Nom. rre ss. Other Exempt Pressure -g= psig TestTemp4.°F Pressure - p pslg Test Temp. °F Pressure _psig Test Temp. OF

9. Rernaifs _ -, ,t7 (opticape MantAxtureft Daft Roccids tobe aftade

- CERhIFICATE OF COMPUANCE We certify that th statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code. Secton XM.

lExpiration Date WA k Da qL// t 20!

CERTIFICATE OF INSERVICE INSPETION-I, the undersignec, holding a valid commnissioniss dd by the Hatonal Board of Boier and -

Pressure Vessel hns Pr -e or Prvince of iJ 4 i,  ; and employed by MSBI and I Comoaan Onnecticut haveInspected the components described in this Ownee's Report iusing the period 11-/C 01 to d30-v and state that to the best of my knowledge and belief, the Owner has performed exauitnatlons and taken corrective measures described in this Ownees Report in accordance with the requirements of ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or impied, conceming the exainaons and corrective measures desiabd in the Ownees- '

Report. Furthermore, neither the Inspector nor his emplyer sha be liable Inany manner for any personal injury or property damage or a loss of any WInd arising from or connected with this inspection.

]-

Inspectors Signatwe X Comntssi UR *S7%"

National BoaMd. State. Province and Endorsenments Oate 3. -3pd--I----

Paso2 of2 Prcviioft 7

ASME SectIon Xl Manual FORM NIS-2 OWN S c RT FOR REPAIRS OR REPLACEMENTS Section EExhibit A As RequIred By The slons Of The ASK Code Sectlon Xl

1. Owner Address: Duke Power Comonny la. Date L/z. o5/

526 S.Church Street. Chardolte NC 28201.100§ Shoot J_. of J_

2. Planl Address:

1-8frROO flrqwTRwR HUY j ~( :.h 29672, 2a. 'Uni: 1 2 67 Shared (specify VJnits

3. Work Performed By: u w o 3a. Work Order J: ; 35 7 Address: . 52 S.Church Street..Charlotte NC 28201-100a A: 0ionklgn@n ob I Type Code Symbol Stamp: I Authorizatono.nVo Expiration Date: 83b, NSM or MM #:  :;-

4. (a) Identillcatidn ofSystem: ZG (b) Class of System: /

5. (a) Applicable Construction Code:_________ ___________ i Add enda, f Code Cases (b) Appticable Edition of Section )a Utilized for Repairs or Replacements: , 29. No Addend (192 through 1892 Addenda for Class MO and CC and their supports)

6. Identification of Comporfents Repaired or Replaced and Replacement Components:-

Column 1 Column 2 Column 3 Column 4 Column 5 Co1 e Column 7 Column 8 Name of Componfent Nam el Mfg. Mfg. Seval No, Nauitl Board No. Cowi Idnltlcation Year D)VI R dA,Riepled, or ASMI Code fta

_ .A/ . - . . .. 1 A G : *1. _

B . ... JRepalred, - No .

Replaced,

- . Q: :l -' . 4 . , V  :, , ,- , Replaoement Yes C . Repaired, No Replaced,

.- . .. . -' . ____:_____: . - ReLacemenl Yes D-  : .  : l 0 .  ; . Repaired,, No Replaced,

____________________ _____________________ .___,__.__.___.__. Replacement Yes E Repaired, No Replaced,

.- . ,:Replacement

, Yes F Repaired, No Replaced,

_____________________ ._____________________ .__________________ ,__________________ -__________.____ Re acement Yes Pop lor2 RmQwtfl

ASME Sectiorf Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 112 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of shedts is recorded at the top of this form.( - / 4 j /

7. Description of Wo F8TC J6o d e He umaticA. Z 1 reOther Exmp

8. Test Conduicted: Hydrostatic Pneumatic Clr OeahPe Other Exempt Pressure - 5A+/-.-F Test Ten10J/

Pressure pslg Test Temp. °F Pressure  : ps)g TestTemp._ °F 9./z Readszj - S~79 9 . c M..ufa.cturer .t i 1,~~~~~~~~~~~~~~

Zpffea M a7due Da3b Recds to be Wact CERMFICATE OF COMPUANCE

/ We certify that the statements made In the repodt are correct and this repair or replacement confornns to the rules of the ASME Code, Section XL Type Code Starnp &A certsfl 9+

g tIfc~Jjpn f o Expiration Date NA I Sigr &~4A/VLI~ThfU~it b' bq DateAV& Q2

-CERTIFICATE OF UISER VICE INSPECTION 1.the undersigned, holding a valid commission issdd bY the Natinl Board of Boiler and-Pressure Vessel s 6 e State or Pnie Of 4&Lsf- mped 13an HSBI and I Corn have omponents described In ths Ownees Report daring the per'od P-31-ic to 3 -Sdil; and state that to the best of my knowledge and befief, the Owner has perfotrmed examinations and taken corrective measures desonibed in this Owner's Report In accordance with the requirenments of ASME Code. Section Xi. .-

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed T 1!-,

or Impried, concerning the examtinations and corrective measures describd In the Ownees ; , X-1:

Report. Furthermore, neither the Inspector nor his employer sluil be iable in any manner for any personal inruty or pivpe damage or a loss of any ind arising from or connected with this inspcin t s

_____________ Commissions _________

Inspectoes signatu Natona Boawd. State. Poince and Endomsements Oate 2J pagg 2 of 2 Rcvigion 7

'(

<C11- FORM NIS*2 OWNER'Sn'?yi¶yTtOR REPAIRS OR REPLACEMENTS As Reqvred By The Prvislo sOf The ASME Code Section XI .

1. Owner Address: la. Oate /_____z 52- C u c t e t Ot t te NC2820 1.10 08 - . Sheet / of /

- . I

2. Plant Address: flt! Nm 1 M rTT(TIAW qq'Av~rr

?~~R~fl= 1 RIY 'SI"A S n 29672 2a. Unit: 1 2 Shared (specify Units, , t 3a.-Work~rder#:,

3. Work Performed By: Dukk.oer.C0128DC . 3a. Work Order #:,

Address: 528 S. Chur haotte 22 _Strea OA Otganitsiln Jobi ReApair Type Code Symbol Stamp: WA Authorization No xplratlon Date: W 3b. NSM or MM #:

4. (a) IdentifIcation of System: ( Ca e4 of

5. (a) Applicable Constructlort Code/ 7 /./ ) Edftlon, Addenda, _ _ _ _  ; _, Code Cases (b) Applicable Edilton of Sectionr Utlized for Repairs or Rcplaocments: t289.No Atnda (1992 through 1992 Addenda for Class MO and CC and thelr supports) 6 nt . c a o n o Ce. .de . d en .n

. . I.,I .I

6. Identillcation'of Components Ropelred or Replacedalnd Replecement Ciornponent8:

_ Column 1 Column 2 Column 3 Column 4 . Column 6 Col I Column 7 " Column 8 Name ol Compof n :t Nacn l Mfi

g. Mfg. sodal No.

• National Board No. Other Identifeadon. Year Bunt Repaired, Replaced, or. ASME Code Stomped

. _ .*  ; .. . . . .u . .  ; . Redsoement

_~~~~~~~~~~ ~~~~~~~

Use or no) r .

f . -_~l od

. Re~~~~~~~~~~~~~~~~~laoe080meht

, e Yes C . Repaired,

. .-.:;,. No

.- . 5.Replacement Yes Repalred, No Replaced,

_ __._ __ __ _ __ __ __ _ __ __ __ __ __ __ __ __ _ __._ ___._ __:_ Rep lacem ent Yes E Repaired, No Replaced#

_.- .. . -. :Replacement Yes F... Repalred, No Replaced,

, . . - RePlaoement Yes Page 1 of2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches. or drawings may be used, provided (1) size is 8 1/2 in. x 1 in. (2) information in itemns' through 6 on this report is included on each form. 047- Ms " z/D6 25Alv sheet, and (3) each sheet is nu ered and tnue number of sheets is recorded at the top of this 51.brJ

7. Description of Wo 2A&iD EO/Y7A)S* 00 t5/9& e'. . m-enu4 XrgVFA)* /Zi &dL~&7Z1r/44&7t Cu7Z&7 L,?d A a Test Conducted: Hydrostatic Pneumatic Non. Operating Press. Other Exempt Pressure &Ypsi 9 Test TempA Pressure gpsl Test Temp. F Pressure p psig TestTemp. °F

9. Remarks

-W=UA Wndackze sData Re0oods to be a Szachd)

CERiTFICATE OF COMPLANCE We certify that the statements made hthe report are correct and this repair or replacement conforms to the lutes of the ASME Code, Sectdon XL Type Code Symbo Stamp W -A Cert.ficate of No. WExpiation Date WA Signed g i/§ .6of teg/ 7 Own z Ots Dew-Til%

CERTIICATE OF INSER VICE INSPECllON 1,the undersigned, holdg a d oomission issued by the Natxnal Board of Boiler and Pressure Vessel Ilr p te or Pivince of U 4. / and employed by

-- 1-HSBI and 1Comoay >ibecti=ut have inspecte the components descibed in this Ownee's Report dunng the period //~'V- 0/ to 3.2.-o Z- and stale that to te best of my knowledge and belief, the Owner has performed exminations and taken corrective measures described in this Owner's Report in accordance wilh the requirements of ASME Code, Section XL By signing this certificate neither the Inspector nor his employer makes any warranty, expressed of implied, concerning the examinations and corrective measures described mnthe Ownels Report. Furtherm6re, neither the Inspector nor hs employer shall lbe liable In any manner for any personal injury or property damage or a loss of any kind arsing from or connected with this inspection.

Z (f ~>

ffiCommissions >;7Sg Inspectrs Signature National Board. State. Province and Endorsements

.OaC&440 of-z 0

Pgc 2 of 2

C0 FORM NIS-2 OWNER'S REPORT UR REPAIRS OR REPLACEMENTS (7 IAs Required By The Provisions Of The ASME Code Section Xil

1. Owner Duke Power Company ia. Date 3-a7-6D-Address 526 S.Church Street, Chalotte, NC 28201.100B Sheet L of I

2. Plant Oconee Nuclear Station Address 7800 Rochester ty. Sdneeaj 8.C. 29672 2a. Unit El 02 3 0Shared (specify Units )

3a. Work Order #q5l4LI3E2%3 -C)1

3. Work Performed By Duke Power Company I ' ' Repair Organization Job #

Addrss 526 S. Church Street, Charlotte, NC 28201-1008 N' Type Code Symbol Stamp WIA Authodition No. WA EXp90tlon Date WA 3b. NSM or MM#

4. Identtffcat f Systemh A iP Class__

5. (a) Applicable Construction Code Be Edon_- Addenda, - Code Cases (b) Applicable Edition of Section Xi Ufftied for Repirs or Replacemens 1989, NoAddenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identiication of Comp sRepaired or Replaced and Replacement Components .  : _:

Column CoI2Con S C:M 4 CohlmnS Cot. 6 Column? Cohnmn a Manu.facturer: Nat:o nal OYrod, ASM E Code Name of Component Name of Manufacturer eBoa MM Year R ed, or Stamped

_ __ _ _ _ _ _ _ _ _ _ _ b e_ _ _ _ _ _ _ _ _ _ Replace mentum(yes or no) o] Repaired' A 04 ~iA 0r~l, rJA j/M -JA0

- -. ORepalred 0 No

_ :_ __ :I/ O Replaced QO1 Replacem1 0

_. n Ye

. R Yes

. Repaired No C  : OReplaced El

__ _ _ _ _ _ _ _ _ ._._._.___ __ __ __ O I Yes oRepaired 0 No o Replaced

~~~~~~~~~~~~~~~~~~~~~~~~~~0,

_ _ _ _ _ _ _ ___ . _. _. _._._._. O fleple ement 0 Yes QRepaIred 0N oReplaced

_ _ __ __ __ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ R ep t ae mn 0 y es .

F 0~~~~~~~~~~~~~~~~~~~~~

Repaired 0No 0 Replac-ed1 O~~~~0 R eplacem ent 0 Yes Page 1of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of wor-apw nc" d Lta'tS on 31 p-1a l

8. Test Conducted: Lf Hydrostatic ] Pneumatic E]Nominal Operating Pressure El Other e} Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks Qyfer e.ceC IP 0-0, - 'A (Applicable Manufacturer's Data Records to be Attached)

CER7IFICATE OF COMPUANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xi.

Type Code Symbol Stamp WA Certificate of Authorizad p No. NIA Expiration Date N/A Signed P1 ILS)C aQL L Datex2a -

Owner orw er's Deignee, Title CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of U,-.- 1 and employed by 1/454 d 7

-___________ have inspected the components described In this Owner's Report during the period /A-/°-d' to, 4 -O z : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

_____________ ,Commissions _ Aw 9 r Inspecto Signature National Board, State, Providence and Endorsements Date 3-2-1 --0 In Page 2 of 2

C) FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS IC (

As Required By The Provisions Of The ASME Code Section Xi

1. Owner Duke Power Compan Is. Date 3- a.-o0-.

Address 528 S.Church Steet, Charlotte, NC 28201-10O Sheet I of -

2. Plant Oconee Nuclear Station Address 7800 Rochester wyo. Sdneea., S.C. 29672 2a. Unit 1I  ! 02 1I3 0 Shared (specify Units r )

3a. Work Order # - - - aI

-o9e5

3. Work Perfornmed By Duke Power Company I Repair Organization Job #.

Address 526 S. Church Street, Charlotte, NC 28201-1008 Type Code Symbol Stamp N/A Authorization No. WA Expiration Date N/A 3b. NSM or MM#

4. Identification of System 11

'Pirts!;u -- re,

-1 ,_- I -

5. (a) Applicable Construction Code . 1 19 Edifton - Addnda, ______________________Code Cages .

(b) Applicable Edition of SeCtlOn XI Utilized for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identificatlon of Components Repaired or Replaced and Replacement Components olum1n I Co;hmn 2 Column 3 Column 4 Column 5  : Co. 6 Cu ColumnS

_~~~~~~~~~~uriuuu B.YINational ---

OU? Reparmd Stap.

ASME Code Name of Component Name of Mnuftu - Serial Number Boar endcaon Built

_ __ __ _ _ _ _ _ _ _ __ __ _ __ _ _ _ _ _ _ __ __ _ __ _ _ _ _ _ _ _ _ _ _ _ Replace ment (~~~~~yes or no )

A Oflepa.lred.44 l4>01 'N" 0 Repalmd O

_ _ _ _ _ _ _ _ A_ C yNoes o Replacedn ORepaired C No

_ . O Replaced

,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ QReplacem ent O__ Yes

• 0 O Replaced, RepaIred C No ooRepaIred D C Yes

__ .__ .__ _ _ 1_Replament CN O

Replaced ORepaired C No*

F Ofl~~~~~~~~~~~~~~~~~~~~~~~~

eplacemen 0 Yes Page 1of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. DescrptionofWork Rep9OL (50)c 5/ -CIfi rloede fgd 4- () to nuts on 3NP-1q bocij -I bta ic r . conneec4vtit

8. Test Conducted: El Hydrostatic E] Pneumatic El Nominal Operating Pressure [1 Other V Exempt Pressure _ _ psig Test Temp. OF Pressure _ _ psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks R 4r fcz Pi 9P 4 5 17 (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPUANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp WA Certificate of No WA Expiration Date WA Signed POwner /( _ S"CgLne, Date 3 - an - c) S

.Owner or Owner's Designee, Tide CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressre Vessel Inspectors and the State or Providence of viec'-4 and employed by ;ssu

-___________ have inspected the components described In this Owner's Report during the period /%S-0/

to,? -Z22-and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xi.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

JI4 II OI I O11

-cine

- -50 i A/. rre I ' v X Inspecto Signature National Board, State, Providence and Endorsements Date3 -?O-z-Page 2 of 2

• C SME Section Xl Manual FORM NIS-2 OWNERS§F16RT FOR REPAIRS OR REPLACEMENTS As Reatired B The Pr43slons Of The ASME Ce Secon XI Section EExhibit A II 1, Owner Address: Duke Power Coon ... Ia. Date&4 526 S.Church Str. Charlotte NC 28201.1008 Sheot / of /

2. Plant Address:

~8OA ~otmR~rt MMQ, qp1Wl 97 2a. Unit: 1 2 Shared (specaly jUnlts, I t

3. Work Performed Sy; DukQf oer Cormeny '3a Work Order # :_ _ _

. Address: 5 . u Street, Charlotte NC28201_10_ " rg.*.ltlba l j~~~t.O bI Type Code Symbol Stamp: 9 Authoriztlon Expiraton Date: ft) -tb. NSM or MM #:

4. (a) Identlication of System: '. 44 (b) Class of System::

s. (a) Applicable Constructilo Code: /P7S Edltlon, ^ Addenda,

• Code Cases (b) Applicable Editlon of Section Xl Utilized for Repairs or Replacements: 989, No Addend (1992 through 1992 Addenda for Class MC and CC and their supports)

6. IdentificatIon of Components Repaired or Replaced and Replacement Componentsv  ;:

Column 1 Column 2: Column 3 Column 4 Column 5 Col O Column 7 Column 8 Name of Cionenl NaMe of MIg R. serd No. National Botd No. other Ide"llaton Year Buit `epairedpF odor ASM6 Oe St1 A paI B .: . .  ; /- , . . 3 . . Reparled, No Replaced,

___________________, , . * . ___ . -. Replacement Yes

c. . . , . , . z  ; Repaired, No Replaed,

.-: . Replacement

.. Yes Q . . .,

Repaired, 7 No7 s 7 7 :

Replaced,

_ __ _ _ _ _ _.__ _ _ Re l aceo m en t Y es E . . .  ; Repaired, No Replacemend Yes F  ; Reopired, No

_ Relaced,

- ______________________ - ~~~~~~~~ ~~~ ~ ~ Yes

~~Replacemnen Pap l ot2 Rowlh" It

-ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. ~ 'g 54, - / 4- / F fr P/ ZXG)0 Z&J

7. Description of Wok FPLk5t) )A/ 0a>M A4990 OA) hlz= Ve. $7 e, ' rtd) e-,A

8. Test Conducted: Hydrostatic Pneumatic Non . Other Exempt Pressure2/5 "sig Test TempA O?

Pressure _psig Test Temp: OF Pressure # psig Test Temp. °F Q9 t5 X 2 7

~

Rmwk~~~r-_~ ;IZ .. -7 (Applcae Marwfactures Data Reconds to be attached CERTIFICATE OF OOMPUANCE We cetfy that the statements made In the repOrt are corret a3nd this repair or replacement conforms to the rules of the ASME Code, Section )a.

Type Code mb1Strmp WAN Cete / ya/ Wgn No. fExpiration A Date NWA Si OWP9

/2 66rU& t A Vf Y X to9 W

-T, Date u/L .i 3 CERTIFICATE OF INSERVICE WNSPECI.o-1.the undersigned. holding a valid commission bss~d by the National Board of Boiler and ' .

Pressure Vessel InsI ;e ae orProvinoe o H and employed by HISBI and I Comoan v fnneticut have ispected fte components descrbed hI tfis Owneis Report during the period 9_e 4'to 3&3 and state that to the best of my:

knowledge and belief, the Owner has perfomned examinations and taken corrective measures descn'bed in this Owner's Report in accordance with the requirements of ASME Code, Section' Xl.~~~. __ -.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed Tc '!-7 or implied, conceming the examinations and corrective measures descrbed in the Ownees -  :

Report Furthermore, neher the Inspector nor his employe shal be liable in any manner for-any personal injtuy or property damage or a loss of anM kd arising froi connected with this inspection.

_ _ _ _ _ _ _o Commnissions f i dW_

lnspecto~s Signature National Doard. State. l~r~ne and Endossements ns ~

_3,0 P*gc 2 of 2 Rcvi~uon 7

( 4 (J FORM NIS-2 OWNER'S REPORT OR REPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASME Code Seetlon X1

1. Owner Duke Power Compan ta. Date 3- X--,

Address 528 S. Church Street, Chartotte, NC 28201100 Sheet l of L.

2. Plant Oconee Nuclear Station Address 7800 Rochester They. Sdneeaj S.C. 29672 2a. Unit 0i -02 ~ O 0Shared (specifUnlt 3a. Work Order# 9 275t 05 (o -) 1.

3. Work Performed By Duke Power Company Repalr Organizaffon Job #

Address 526 S. Church Street, Charlotte, NC 28201.1006 Type Code Symbol Stamp WA Authoration No. WA Expiration Date WA 3b. NSM or MM #__

4. Identifcaon of SyCtmLObe-SSU -S~iviAm

5. (a) Applicable Construction Codeale.on n Ii9k1 Ed on__ _ Acddenda, - Code Cases (b) Applcable Edition of Section Xl Utlized for Repairs or Replacements 1989, No Addenda (1992 through 1992.Addenda for Class MC and CC and their supports.);

6. Identiflcation of Components Repalred or Replaced and Replacement Components CohmnI cohtmn2 C mS Cetmn 4 Columna C7oluMtSI;

~~National

~~~~ Rp ird, AS~IVI Code Name of Compnenrt ONe manufacturer l Sr! l Board Bum Rp l SMEd Sdtntmcpedon W N m ber 'Number ____________o Repac ment( esor no) o Repaired O No A .  :: . . _tO Rplaced O B

OOfl~~~~~~~~~~~~~~~~~~~~~~~

Repaired eplaced O

_ _ _ _ _ _._ _ _ _ _ _ ___ _ _ :_ _ _ : _ _ _ : _ ._ _ _ _. _ _ _ ._ _ _ _ _ _ _ _ _: _ _ _:_ :_ _ _ _ _ _ ._ _ _ _ _ ._ _ _ _ _ _ t l- 0 R e pla c e m e n t fO~~~~~~~~~~~~~~~

Repiaceent 0 O3 Yes-Y es

_L l  :  ; ~I  :. %11 . I; O R P

. Repaired F Replaced O0 YeSNo

_ _ _ _ __ __ __ _ __ __ __ _ _ _ _ _ _ _ _ _ _ ~ ~ ~~~~~0 R olao mEl Yes D Repaired oReplaced

~~~~~~~~~~~~~~~~~~~~~~~~~0 0 N

__ __ __ _ _ _ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ o~~~ ~~~~~~ent R eplacem El y es 0Repaired lN o

O0 Replaced R ep lacem ent 0 Yes oRepairedEl N F:0 Replaced Page 1of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Descnption of WorkUrko Ilac-ect(% 5/A" bli 4 t8 On S1PS1A)

8. Test Conducted: h Hydrostatic El Pneumatic [ Nominal Operating Pressure F] Other liExempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF 9.Remarks Pefrene ?iP 0 - Oc)3 3 (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPUANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

lrpe Code Symbol Stamp WIA Certificate of Author on No. WA Expiration Date NIA Signed Owner

/f W)

Owner's ignee, Tie Date 3-a CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Providence of r and employed by Is5 e r ,4

-___________ have inspected the components described in this Owner's Report during the period 11 to 3-2-,o,  ; and state that to the best of my knowledge and belief, the Owner has performed examinations ancPtf taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

__________________________ Commissions t 404j !ti-J Inspecto Signature National Board, State, Providence and Endorsements Date d-s7- °-'

Page 2 of 2

E ASME Section Xl Manual FORM NIS-2 OWN"-rt;§JP RT FOR REPAIRS OR REPLACEMENTS Section EExhibit A As Reautred By The Pslkons of The AME Code e0ton Xl

1. Owner Address: Duke Power COMOnYA la. Date /~ZOZ 526 S.Church treet. Charlodtte NC 28201-1090 Sheet L of /

2. Plant Address: _O N2TAVAR 2 9qPArTflN6 7 A1RO0 RWUS~TEWR =V -W]S1WMA -f 8 29672 2a. Unit: 1 2 da 37 Shared (specify Units ,

3. Work Performed By. Duke Powor Comoanv Address: .52 S.Chuph Street. Charlotte NC 28201-.100 3a. Work Order P: ~- ._10s': / 0 *-

nOr0tg,,*.tron Job S Type Code Symbol Stamp: L Autho'lon No. M Expiration Date: WA 4b. NSM or MM#:,

~

. . , !? 0 '

A

-. la%

% IdAnM111-60tla

1. ..,.. IU

, "rRIV1 Al Qavtam VI.~ *U.wlf ,A. tV. . ' 4., (b) Class of "ystem: /

5. (a) Applcable onstructionnCode: AEdition, ~ Addenda, _ Code Cases (b) Applicable Edition of Sectlon Xl Utilzed for Repairs or Reploaements: (1992 through 1992 Addenda for Class MC and CC and their supports)

6. Identification of OmponnRepalred or Rplaoed and Replacement Components: .

Column 1 Column 2 Column 3 - Column 4 Golumn 6 Col 6 Column 7 Column 8 Name oi Component Nam. of Mfg. Mfg. Srfl No. National 8oard No. Ore51dfloat Yearmr A/I? Ak n Replaced A . Repaired, R e P~i mnt No Ye s AO .

.fq .

..Replaced,

__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _._ _ _ _-_ _ ________ __::_ _ __._ __ _ _ _ _ _ _ _ __A . epla cement RRepaired,. YNo es Replaced,

__ ._ _ __ __ __ __ __ __ __ __ __ _ __ __ __ __ __ __ __ __ _ __ __ __ __ __ __ _ RSePlaced, e placemen t Yes E . - .  : . . ReFpared, No

_ _ __ _ _ __ _ __ _ __ ___ _ __ __ __ _ __ __ _ __ .__ _ _ _ __ _ _ _ _ __ _ __ _ __.___ _ __ _ __ _ __ __ __ __ __ __ __ _ Repla cement Yes F T T ..

Repaired, No

.. ~~~~~~~Replaced, R0plbornenl Yes F ~~~~~~~~~ ~ No

~~~~~~~~~~~~~

Replaced,

- Replacement Yes Pai 1ot2 WVotI^ It

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. D~escrition f ork doic;W;P4 fG6< 2 /i/2ig S.TstZn ,t. 33. - --

8. Tesl Conducted: Hydrostatic Pneumnatic Nomn. Operating Press. Other Exempt Pressure 292& psig Test Temp.&I-F Pressure p;Ig Test Temp. OF Pressure P g Test Temp' OF

9. Remarks (Applcable l aUftufs Data Recods to be attacbed)

? CERTIFICATE OF COMPLIANCE We certify t te statements made In the report are correct and this repair or replacement conforms to fte rules of the ASME Code, Section Xl.

Type Code Stamp LVA Cerfi ae rnjpo Expiration Date NA SignedJ Date ____

Ov¶~~~e~~T ift Pressure CERTIFICATE OF INSERVICE INSPECT-ON 1,the undersigned, holding a valid co<mLsso Iss by the National Board of Boiler and.

e State or Pwvknce of bi -W /" /?-

thVi and employed by I..

4 HS81and I 4 cut have'inspected the components descri In t I -

Owner's Report durig the peiod LŽ^/zzD1 to :

1

4.

and state that to the best of my-knowtedge and belief. the Owner has performed examinations and taken corrective measures dibed in this Owner-s Report in accordance with the requirements of ASME Code. Section Xl.

By signing this certificate neter the Inspector nor his employer makes any warranty, expressed C or implied, conceming the examinations and corrective meares described in the Owne's' Report Furthermore, neither the Inspector nor hs employer shalt be liable in any manner for any personal injury or ropety damage or a lss of any SInd arsing fromn or connected with this inspl° /

insXg/ Comnmissions 5Y Inspectoes Sigature NHaiona Board. State. Provice and Enorsemernts Date

• Z.-

Pagg 2 or 2 Rcvision 7

ASME Section XI Manual FORM NIS'2 OWN' EPqRT FOR REPAIRS OR REPLACEMENTS Section E Exhibit A As Required By The Provisons OP The ASME Code Section Xi

1. Owner Address: Duke Power Com32nv Ia. Date ja1rtIo 1626 a. Church CaltteItet N 28201.-I 06 Sheet L.ofolt

2. Plant Address: QCONR Elm=.VA STATTON 1ROO LOMSER~ MM 9-SHIG - S n 29672 2a. Unit: . 1 2 Shared (specify Units S) ,

3. Work Performed By: Duke Power Comoany 3a. WorkOrder # :q9S $1 I 521-t-77 Address: 526 S. Church Street. Char[otge NC 28201-1006 "irp Orge~nks"" M I Type Code Symbol Stamp: N/A Authorization No, " Expiration Date: WA 3b, NSM or MM #: _ _ _::

4. (a) Identification of System:' to r GOa rav I+ *, 4 (b) Class of System I

_ si I, saI . A.

5. (a) Applicable Constructilon Code: 2 1 (DO I .Edition, Addenda, Code Cases (b)r Applicable Edition of Section Xi Utilized for Repairs or Replacemrrie: Jd89_hN Addetda (1992 through 1992 Addenda for Class MC and CC and theIr supports)

6. IdentifIcation of Components Repaired or Replaced and Replacement Components:

Column 1 Column 2 Column Column 4 Column6 Col 6 Column 7 Column 8 Nam*

_ Comnponen Name ol_

Nmem 1Ml.

r --

__Component_

Mrg. 8Nm No.

Natonal Board No

~~~~~~~~~~~~~~~~~~~~~~~~~~~~Rgepleeemnt

__Mfg.__ _ __

Qof IdWentIfetlon

__ ___l__RNo.~m Ywer BuNt Aspulr*d ftoepdt or AME Code 8tampid n

orno A IRepaired.ess  ; Bt tS9 83 ^ 1 4 i - -41 R _

-/D Rpr B . Repairei, 7 . No Replaced,

-  : .... .Replacement Yes C. . Repaired. No Replaced,

- . .. Replacemenl

.. Yes D 0 - 3l-Repaired, . No70 : : 7 7 Replaced, Replacement Yes E . > . . Repaired, No Replaced,

_ . .  : . Replacement Yes F l X v _ X- __^ v l Repaired, No Replaced,

,- . Reoleaement Yes Pagl I o12 Revision 7

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Descriptonof WorlapiCa JASC. dI5C;n lVJ 3Rc- W

8. Test Conducted: Hydrostatic Pneumatic Other Exempt Pressure, 21Ipsig Test Temp. Al 0TOF Pressure psig Test Temp. OF Pressure -_psig Test Temp. °F

9. Renabe n Da o btc

• ~ ~ ~ ~ ~ ~ ppmnuatms cm mia owds to be aftcad CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are correct and his repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp W(A CelficatW l g f No. Mt! , Expiration Date &A Sig /§ 8 >4E Dateae//LL_0W D~ride; CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid comnission Issded by the National Board of Boiler and.

Pressure Vessel I o State or P ice of t4444v 4he and employed by HSBI and I Cornpany inecticut have tied the components descdrbed hn tis OwneesReportijuringtheperiod /1-lz-ai to 3%t.4 :andstatethattothebestof rn knowledge and belief, the Owner has performed examinations and taken corrective measures described Inthis Ownees Report in accordance with the requirements of ASME Code, Section By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations arid corrective measures descrbed in the Ownee's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kdnd arising from or connected with this inspection. f

___________________ Commissions _ _ _ __ _ __ _

inspectoe's Signature National Board. State. Province and Endorsements Date J5 e -

Page 2 of 2 Rcvision 7

ASME Section Xi Manual FORM NIS-2 OWN6A(..._PORT FOR REPAIRS OR REPLACEMENTS ISectionffEi'blt As Required 1y The Provtslons Of The ASME Code 8eollon I

1. Owner Address: Duke Power Comoany. I a. Date0 CLM -

526 S.Church Stet. ,C harlotte NC 28201.1006 Shoot-L e ot /

2. Plant Address: OC~ONEE NUCLT*AR qTATTQV W P-.900 TIOrTIRIA"M MM- q.'PWV(IA..

= ,

R-M: . _

9QA79

_S .

2a. Unit: 1 2 d2 .Shared (speciiy units

3. Work Performed By: Duke P=[ C&MMW , Sa. Work Order#:76 t/~7 Address: :52I S.Church, Stret. Charlotte NC 282011006 fe"It 019hhe0" M e Type Code Symbol Slamp: NA Authorization' No.Aipcplratlon Date: ,  ; 'Sb. NSM or MM #:

4. (a) Identillcation ofSystem: - - . )o(b) Class ofSystem:

5. (a) Appflcable Construction Code: )EdIton, AAddenda., A Code Cases (b) Applicable Edition of Section Xi Utilized forRepalrs or Replacements: nn (1992 through 1892 Addenda for Class MO and CC and their supports)

6. identifecaton ofCoomporients Repairedor Replaced and Replacement Components:

ColUmn 1I Column 2 Column 0 Column 4 Column 0-; omColumn8 I Name 01Comnenl Nam of Mg. Mfg. Serial No. Nationl BDord No. OheienIftflilton YnraBuil RtplirAe, eplaed. or AOM! Code Stamped F . ' . __' ' ___' _.' eIm!- R'0,1 j . iil-" .4 d :  ;; . . . ! : S .~~~~~~~~~~~~~~~~R~B ed No

>  :  : > - . _ . . . .  : _. M__~~- Replaeement . .yes Ct . ... .; A . . . .~~~ Repaired, No i .. ,. , , I , ,. i , .. ~~~~~~~~~~~~~~~~~~Repiraced

. ~~;_ ~ ~.___:_._.:_*____._

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Replacem ent .Ye~s-0 .  : . Repare, No E . . . . . ~~~~~~~~~~~~Refcemint: Yes

-~~~ ____________ __________

- _ ___ ___ _ _ _ - Replacement

~~~~~~~~~~~~Replacement Ye.;

Yes E . -.  : fRepaied, No Replarced Repalred, No Replaced,

- . Retacement

. Yes ROVNIAf 7 f

ASME Section Xi Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2) information in itemsl through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

fonn. 4S. - /

• 7S- j

7. Description of Wk AC 2 d6RPSwDk:S OA) C'A)

A10=CA/16 &d4) e0 -°o 9 8 Test Conducted: Hydrostatic Pneumatic Nom<jji~Press. Other Exempt Pressure Test Temrp./a ;F Pressure__ __psig Test Ternp. _ F Pressure -pslg Test Temp. °F

9. Rsem _ /Aarcs c 6 g *29 I Sa.An al: a

- l~~~~~~aWbe Uaubbief Data Pweotds to be afachd) I CERTIFICATE OF COMPLIANCE We certify that the stateaents made In the report are corfect and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Synbol Stamp 4- I Expiration Date WA Date . 6/

0 § CERTIFICATE OF INSERVICE INSPECTION 1,the underied, holding a vald cixhtlsion Issded by the Natftnal Board of Boiler and ' iI11, .

Pressure Vessel l sor;; azl4,the State orP roncA-o' of A and employed by H1SBI and I Coo l have'Inspected tMe components described In this Ownees Report ilurng the period IL to 3 ~Q .: and state that to the best of my knowledge and belef, the Owner has performed examinations and taken corrective measuresj descn-bed in this Owner's Report in accordance with the requirements of ASME Code, Section I4-Xl.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and coctve measures described in the Owne's-Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property dage or a loss of any'id atis!ng from or connected with this inspection.

.) g2H<$>ffi~~z~estl~unissions 52 tnspectoes Signature National Board. State Proce and Endotsements Qate 3-Paz.c 2 o02 Revision 7

I .J (2, FORM NIS-2 OWNER'S REPORVi.4-R REPAIRS OR REPLACEMENTS As Required By The Provsions Of ltehASME Code Secton xi

1. Owner Duke Power CompanY 1i. Date Address 526 S. Church Stet Chtotte, NC 28201.1008 Sheet I of I

2. Plant Oconee Nuclear Statlon Addre 7800 Rochester fty. Sdneeai S.C. 29672 2a. Unit 0i 02 0 Shared O (specify UnIts )

3a. WorkOrder# 9S 85I59 O - C)l

3. Work Performed By Duke Power Company Repalr Organization Job #

Address 528 S. Church Street, Charlotte, NC 28201-1006 Type Code Symbol Stamp NIA AuthorIzatlon No. WA Epibo Date WA 3b. NSM or MM #

,4. Identification of System )4- Vrpus- ur.- L. class---Q,-

5. (a) Applicable Construction Code S?.) 19&a Edrlori,-: - AcIdenda,.._ -

Conde

_w55 Cases (b) Applicable EdtMon of Section XI UtIflzed for Repalrs or Replacemens 1989, No Addenda through 1992 Addenda for Class MC and CC and their supports.) .

6. IdentNihctiton of Components Repalred or Replaced and Repa ent Components

_ CotumniI fbMa m2 _m 3 Oumn4 Col 5 oll. 6 otnn7. Coun8 Manufacturer N tloitat Otheryear Repaired, ASM ECode Name of Component Name ofManufacturer SoaI Number Board I leaon Buftl

_ __ __ __ __ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ e_ _b (Uy es or no) 1NS/ A 12)dll*^a A/t Ae 0 .

p lged Rep:aced .

s N

_~~ ~A .I ._ .I~ _ _ ORepired e t 0 Yes B IW ~ r 0 -- _ O0 Replaced t o Replaced' ORep"Wrd O No

_ _ _ _ _ _ _ _R

_ _ * .__ O R eplacem ent c p l0 O Y es Yes OflRepahred

.: Q No F Replaced Oir~ed ep a No oReplaced

.- 0 Replacement 0 Yes F.

oRepa.red Replaced

~~~~~~~~~~~~~~~~~~~~~~~~0 C No

- _______________ . _______ _____________ ~ ~ ~ ~0 epla em en 0 Yes Page l of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 in. x 11 in. (2) information in items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work 51h nb na &I/bhnnd c0"ntpA-o10 Qtuds on- a1/a ] Vciv. Ak- so1

8. Test Conducted: Hydrostatic Pneumatic El Nominal Operating Pressure Other lI Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. OF

9. Remarks MIJ l A (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

lMe Code Symbol Stamp WA Certificate of Au tion No. WA Expiration Date WA Signed Aw Ag T e Date4IaA I6

.we or Owndr's Designee, Tide CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commlssio Ils ped by te National Board of Boier and Presure Vessel Inspectors and the State or Providence of 6A34M o#*

-tJ64 and employed by W have inspected the components described in this Owner's Report during the period 4-3o0-3 to &-go-o3 : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

CV' ddLPsCommissions /VCi61/ m ALX Ins ctor's Signature National Board, State, Providence and Endorsements Date 4- 3-9-O3 Page 2 of 2

FORM NISW2 OWNER'S REPOkFI eOR REPAIRS OR REPLACEMENTS (

As Required By The Provisons Of ASME Code Section XI .

1. Owner Duke Power Company Ia Date L ;zt3 Address 526 S. Church Stre, Charlotte, NC 28201M1008 Sheet I of I

2. Plant Oconee Nuclear Station Address 7800 Rochester THy. Ssneeai S.C. 29672 2a. Unit 01 02 . 0 Shared (specfly Units )

3a. Work Order # qq%3t(5A6 -01

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 S. Church Sbet, Charlotte, NC 28201.1008 Type Code Symbol Stamp WA Auftrization No. WA Expiratlon Date WA 3b. NSM or MM #

4. IdentifIcation ofas 1

5. (a) Applicable Constion L 19A Edidon - Addenda, - Code Cases (b) Applicable Edition of Section XI Utilzed for Repairs or Replacements 1989, No Addenda (1992 through 1992 Addenda for. Class MC and CC and their supports.)

6. Identification of Components:Repalred or Replaced and Replacement Components _ . ;

S Cohumn I  ; Colum h2 Co:mn S 00mn 4 C,, nm 6 Col is Coln? Cohomn a National Ohr yw Reatmred, ASME Code Name of Cornponent Name of Manufacturer Mwfactt Serial Number'. NuBoard Identification u( Rmerceur o Stamped

.A... O Repaired O No B _ _ _ _ _ :o, )e l .~J  ?% I :JI 4 _ O0 Repi = O No Yes

__ _ _ _ _ _ _A__A:_ _

O Replhed O R eplac m ent l O Y es Ck-L. - O Replacment Yes 8ORepaired O

aire~ edp O O NNoo E' . :  : ,; ,, . 0 R~~eplaced ~ O NO

~~~~~~~~~Repie E

D -  :, .

I f

_ _ _ _ _ _ _ _ O OReptaced R

~ ~~~ ~~~~~~~0 Replacem ORepaired ent 0 Y_

Yes eYess f No, E 0 Replaced

.1

_ __ _ _ _ _ _ _ _ _ O~~~0Replacement 0 Yes Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 In.x 11 In. (2) Information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form. X //a3 7.Description ofWork RW10 ce.A J;4 S ) (e- , s UtL a5oe(L ) OI a+n It" 3LP-a a

8. Test Conducted: El Hydrostatic 0 Pneumatic E Nominal Operating Pressure L Other [ Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psIg Test Temp. OF

9. Remarks ?iP O 3 6 3-(Apprlcabli Manufactureres Data Records to be Attached)

CERTIFICATE OF COMPUANCE We certify that the statements made Inthe report are correct and this repair or replacement conforms to the nrtzI of the ASME Code, Section Xi.

Tpe Code Symbol Stamp WA Certificate of Auth bon o. WA Expiration Date WA Signe po ,Qc SovELL{;- Datet/ oS or Ownbe Designee, Ritie CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid cornrUsiopissued by the National Board of Boller and Vexsreessel Inspectors and the State or Provdence of I and employed by pad have Inspected the components described Inthis Owner's Report during the period kb3.?

to L otate that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report in accortlance with the requirements of the ASME Code, Section Xi.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described In this Owner's Report Furthermore, neither the Inspector nor his employer shagl be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

0 4 Commissions dCJb9 10 I ector's Signature National Board, State, Providence and Endorsements Date - 03 Page 2 of 2

o

( r $ME Section XI Manuel FORM NIS 2 OWNERf..7 irRT FOR REPAIRS OR REPLACEMENTS As RequIred By The Prdlslons Of The ASME Code Sefton Xl I- Section EExhibit A

1. Owner Address: la, Date__Z_/__/

_26 S.Church Street .Charltte NO 28201.1006 Sheet.l .ol /

2. . Plant Address: OMME W. NTIfGTJAR qTIATIMN 100 Bfl=SRR~ MM, -qPNPtC Sg -G 29672 2a. Unit: I 2 ( . Shared (specify Units

3. Work Performed By: Ouke Power gompany 3a. Work Order #:, ~'8~ 7711 Address: . 526 S.Church street. Charltte NC 220Q1-1006 At.p.omorhaftn Job I

.pCe e .S . . .

Sbo Cod Typo~~~~~~ am:L9Ahralon No. WA Expiration Date: WAlM 3b. NSM or MM #: _.

4. (a) Identillcationof System: 4., (b) Class of System: /

5. (a) Applicable Constructlon Code: i 'Addenda, AihO Code Cases (b) Applicable Edition of Section XI Utilized for Repairs or Replacements: (192 throuh 1992 Addenda for Claos MO and CC and their supports)

6. IdentIfication ol Compontents Repaired or Replaced and Replacement omponents:

=olumn~l column_2 _ column 3 Column 4 Column 5 Col Column 7. Column 8 Name dI Co"Onnl Nme of Mfg. ' Mfg, eih1 No, I l NaUbntl BORM No. Olha Idtifloation Yos Dtil Ropord, Replsoedf A ME Oodt Stvw B e ;16 .e . . . . i . ... Repaired, No AA . ' b. ','! ' . Al,. Replaced.

~~~~~~~~~~~~~~~~~~~~~Replaced,-.-

._. R e pla em ent Ye s 8C .  ; ,. . ^ .. Repadred, No

_-. , , . . .. . . _ ~Repheient Yes o Repaired, llo E . . .. :R Replaced, palred,, No

,- . . .,Replacement Yes Replaced, fT;  ; . . . .  : Repaired, No Replaced,

. - . , Replacement

. . Yes Per I On2 RWvlqlan7

ASME Section Xl Manual Section E Exhibit A Form NIS-2 (Back) I.,1 NOTE: Supplemental sheets in form of listS, sketches, ordiawings may be used, provided (1) size is 8 112 in. x I1 in. (2) infornation in ftemsl through on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this foarn. t/>,> 1St F &</S& - 0,-<WY SPirrA6)e,5.

7. Descripton of o(Wuck L7?

H osai FTCAue feaL i- Op n Pe ther Eep 8S. Test Conducted. Hydrostatic Pneumatic: Noni.Oj eratingPress. Ote Exempt Pressure 2 -psg e-2A6 9 Test Temp .MeF Pressure PsPg Test Temp.

Pressure Z-si Test Temp.

9. Remarkcs (Appricabte Mauftckreft' Data Recod$ to be aftach~ed CERTWICATEOFCOMPLIANCE We certiy tat the statnents made in the report are corract and this repair or replacement corfoM to fte rues d the ASME Code, Secgon XL Type CoaSyfg Slamp 9,

• Certifi~ato I o z Expiration Date tLV Signed I-(F1(S1 /pw 0* Date @ .- L  ;

4~~~~twee~sg,

. *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CRTIFICATE OF UtSERiCE INSPECllON ..

• the undersignedu holdiw a vard comn@sion hsdi iN 'y Mas Board ~of Bolctoand Pressund Vessed hosne a In or Province of L .and employed by f and I CoMranonecticut haveinspected the components described In this Ownees Report dlur the pierod - to ' and sate that to the t of my 01.1 knowledge and belief, the Owner has performed examiations and takenx corectve measures described in this Ownees Repot hI accodance with the rdquirements of ASME Code, Section XL . i' By signg this certificate neither the Inspector nor his employer makes any warranty. expressed orkmped, concerg the examinations a ndtve mea.sures desb in the Ownees-Report. Furthermore. neither the Inspector nor his enptyej shal be liable In any manner for any personal injuy or prope damage or a loss of ay kdnd arising from or connected with this

/24< mCommssions

/ 4 kbnSpecloi S~gnature - Nalonal 8ard4 Sae. Pvnce and Endorsements Dat-Pzp 2 of 2 Revision 7

(i FORM NI*2 OWNER'S REPOR(. OR REPAIRS OR REPLACEMENTS As Required By The Provislons Of The ASME Code Section Xi

(

1. Owner Duke Power Company la. Date 4Il3.

Address 526 S.Church Street, Charlotte, NC 2801006 ISheet of I

2. Plant Oconee Nuclear staton  :

Address 7800 Rochester Hew.,/dnecai S.C. 29672 2a. Unit 031 [32 - 11It ____)

3a. Work Order # g91R ss a (,!4, - a I

3. Work Performed By Duke Power Company Repair Organizatlon Job #

Address M52S. Church Street, Charlotte, NC 2820141006 Type Code Symbol Stamp WA Authorfzatlon No. WA -Expration Date WA 3b. NSM orMM #

4. Identrcationof _

_ Class2...

5. (a) Applicable Consnidon Code, I _ 19A. Edtion - -___ Adderna -Code Cases (b) Appicable Edion of Section Xl Ulized for Repar or Repacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identiftclaon of Components fAlpaIred or Replaced and Replacement Components Cehmn I CO.mM2 ColumnM3 Cohmn4 ColhmnS 0c1.6 Column7 Colmna

_ffm yet ,epatr, R .StaMp.e Name of Component Name of Mnnurnert . Sertal Number Bonr Identbaton Year. Repled, or ASMnCod Banufter.bo r d.:-; BUI: Replacement (Yes or no)

Al .Replaced'_ ~,_~ ~ ~ ~ ~ ~ ~ ~ ~ __~ ~ N me _ ._,_._,

0yes

.ORepaired

.. : O No O Repaired O No C _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ ~~~~~~~~~~~~

0Repalred 0 No

_ . . Replaced F _ .

0 RelcdS

~~~~~~~~~~~~~~~~O Repared O Yes E -

0~~~~~~~~~~~~~~~~~~~~~~~~~

Replaced No

_ _ _ _ _ _ _ _ _  : _ _ _ :__ _ _ _ _ _ ._lOl

_ _ _ _ _ _ _ _ _ _ _ _ m ent 0 Yes

. ..... . . . . ... . . . .~~~~~0 Re~

F  ! ,. .',.*.. ', Pagelolt2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 In. x 11 In. (2) Information In items 1 through 6 on this report is included on each sheet, and (3)each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work PRp12atC-A el; Sc t 'as) stud t+(tiq I" nuts I[A 14 "5L f- aO 8 Test Conducted: E Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure I Other '~(Exempt Pressure _ psig Test Temp. OF Pressure - psig Test Temp. OF Pressure _ _ psig Test Temp. OF

9. Remauks QIL~_re-rilkc PlIP 0-03 30 (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules C of the ASME Code, Section Xi.

7'pe Code Symbol Stamp WA Certificate of phuzN1o. WA Expiration Date WA .

Date _L- aq - O6 Owner Ownes DesgneeTitle CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commlssion Ipssjed by the National Board of Boiler and Pressure Vessel inspectors and the State or Providence of IQ eke -i . - and employed by JSA -7 have Inspected the components described In this Owner's Report during the period &i30&L to L-Ro-83 :and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report In acoorlance with the requirements of the ASME Code.

Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty expressed or Impfled, conceming the examinations and corrective measures described In this Owners Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

4VO'~t44e gIa2a~;k Cnmmi4qqinn-q

__,, ,,. ,,__,_, ,_ W014f.4AI&

InWctor's Signature National Board, State, Providence and Endorsements Date G& -.so-O3 Page 2 of 2

C FORM NISa2 OWNERWS REPOR.4OR REPAIRS OR REPLACEMENTS C As Rewired By The Provisions Of The ASME Code Section XI

1. Owner Duke Power Company 1a. Date UrL17.-z Address 528 S. Churhti Sr Charlott, NC 28201-1OOB She t . f Sheet 1_ of _-

2. Plant Oconee Nuclear Station:

Address 7800 Rochester Hwy. Seneeai S.C. 29672 2a. Unit 01 02 0 Shared (specify Units )

3 a. Work Order # 9? 5 3 g=Loa -6O1

3. Work Performed By Duke Power Company Repair Oranization Job #

Address 526 S. Church Street, Charlotte, NC 2 01O 08 Type Code Symbol Stamp WA Autiosiatfon No. WA Exptlon Date WNA 3b. NSM or MM# -

4. Identification of SC

5. (a) Applicable Const on Code93ZIg .a Edfion. - Addenda - PCMf Casms (b) Applicable Edition of Section Xl UtilIzed for Repairs or Replacements 189, No Addenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. IdentIficathon of Components Repalred or Replaced and Replaement ponent COMn I Colun 2 Colm3S Column 4 Colmn S C t6 Cohmn 7 Column Name of Component Nameof Manu r cturer Serial Numbere Ntol B a dd nt ic ioBu il Reird Re i cc d o Stm Code A {3c

_____________ ; n 0 <)gFNumber R t or (yes m eno)

ORepatred N

/.

A . u I % J I~~~~c~~.

~

I~~~

0

_.OReplaced Jf ~~~ j ~~ ~ ~ 0 -y es pai r d .- O0' No oC~eReplaced

-0__ :

- Replacement 0 Yes

_ Replaced D  ! h ,, - ,, - ~~~~~~ Oflepefred ~~~~~O epair O No No F  : 0 \ ~ p Ci0 Replaced E -

Oflepaired ElReplaced0

..I.0 Repel me 0O~~~~~~~~~~

Yes 0 Repared ONo F Replaced0

~~~~~~~~~~~~~~~~~~~~~~~~0 Page I of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 In. x 11 in. (2) Information Initems 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Desciiption of Work il 1*pIO o641y nui ar-% lve 34 P--S9

8. Test Conducted: El Hydrostatic 0 Pneumatic [ Nominal Operating Pressure El Other F Exempt Pressure _ psig Test Temp. OF Pressure psig Test Temp. F Pressure psig Test Temp. OF

9. Remarks 2J/A (Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are correct and this repair or replacement conforms to the nrles of the ASME Code, Section Xl.

Type Code Symbol Stamp N/A Certificate of Auth otlon No. NWA Expiration Date NWA Slgned-i Plol6gC j-~ acDte4

.wr~h or Ownes Designee, Tide CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid cornmlsIon jssued by the National Board of Bogler and Preasure Vessel Inspectors and the State or Providence of and employed by 026 4r

-___________ have inspected the components described In this Owrder's Report during the period 7-Z-d.

to 7L-d . j and state that to the best of my knowledge and bellef, the Owner has peruorned examinations and taken corrective measures described in this Owner's Report Inaccordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described Inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable Inany manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions #/V/c #dA In ector's Slgnature National Board, State, Providence and Endorsements Date 7- /- 3 l Page 2 of 2

( (

ASME Section XI Manual FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS Section E Exhibit A As Reqtired By The Privisions Of The ASME Code Section XI

1. Owner Address: Duke Power Comoany Ia. Date_______

526 S. Church Street. Charlotte NC 28201-1006 Sheet 1 of $

2. Plant Address: nr(lWrr W"rTYAR Q#rA#PTnm l

• 8Q-R00 nrn RTt Sr11EA- FIX- 29672

-u' 2a. Unit: 1 2 QJ Shared (specify Units _

3. Work Performed By: Duke o er A. Work Order #: 836 Z SV7H1 Address: 5268 . Church 8treet. ChArlotte NC 28201-1008 npr Orgaiftsibn Job*

Type Code Symbol Stamp: L Authorizatlon No. S19 Expiration Date: 33b. NSM or MM #:

4. (a) Identification of System: fC 3 4. (b) Class of System:

S. (a) Applicable Construction nCde: ' , 5a & X ddenda, Code Cases (b) Applicable Edition of Section XI Utilized for Repairs or Replacements. N (1992 through 1992 Addenda for Class MC and CC and their supports) l

6. Identiflcatlon of Components Repaired or Replaced and Replacement Components:

Column 1 Column 2 Column 3 Column 4 Column 5 Cole Column 7 Column 8 Name 01Component Name ol M10. Mfg. serial No. National Boald No. Other denflcation Year Bunt Repalred. Replced, or ASME Code Stamped A_____________________ _______________________ ___________________SReplacem ent (Ly s or no)

A 4ek Y- tO- 'y ' Repaired, No RejIa ed B Repaired, No Replaced,

_____________________ - Replacement Yes c Repaired, No Replaced, Repacement

- Yes E . Repaired, No Replaced,

____________ _ _ - Replacement Yes F Repaired, No Replaced,

.. __________________I__________________ _ - Replacem ent Yes b.-..I<

Page I or2 Revision 7

9 ASME Section Xl Manual Section E Exhibit A Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches. or drawings may be used, provided (1) size is 8 1/2 in. x 11 in. (2)information in iternsl through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

R C^e i r 1. ks A eS . twa-s £,p5 ga o? CA

7. Deciptionof Wok &e cxtd -

S. Test Conducted: Pneumriatic' Nom. Operating Press. Other Exempt Pressure: 260 wsig TestTemp.Žt-1 F '18?3737. - ¢sf;-0 X0- .- '

Pressure psig TestTemp._ F L &o ,. m %C Pressure iprlg TestTemp. *F hydrsi(ec t-c t.

9. Remarks i~~shd rkP#eyG

))

h~~ SA t JQSA/4)CSI4SS>6};

IIE&." /JK I forZ 4 2)Ij,.

v

/- A ie0s? {L 4A_1.D&

pi 1.

WC01°

'-O" iDL*TJ Z.

(Appficable Manufacbures Data Reds to tie attachd)

CERTIFICATE OF COMPLUANCE We certify that the statements made in the report are correct and this repair or replacement conforns to the rules of the ASME Code, Section Xl.

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, hoding a valid commrission issued by the Haftina Board of Boller and Presure Vesel Inspectors and the State or Provnceof. 16v~- _and employed by I= adI ComayofHarfor Q2have Intspected th4 components describ~ed Inthis Ownees Report~during the period .. A le, I. to lzih and state that to the best of my knowleadge and belief, the Owner has perfonmed examinations; and taken corrective measures described in this Ownee's Report in accordance with the requirements of ASME Code, Section Xi.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or Impried, concerning the examinations and corrective riaeasures described In the Owner's Report. Furthermo~re, neither the Inspector nor his employer shall be liable in any manner for anry personal injury or property damage or a loss of any kind arising fromn or connected with this inspection.

Tye % yd S Commissions Inspectofs Signatue tationai Board. State. P:o ince and Endorsements Date ghI&e7 .

eror.enn:l) '7"/4 "WGVtZ1c"y -Pae2r Revision 7

A eet- -3 - f' F- T-345 P-002/003 FEE 22-im I&A.0ccl. W 04 qup

_-1

... -1 f.

.A:- &

,,- W."_

Wk.

.51se see -S 1... .

X-AAW,

A=d 2%JMIM=

wk iii-A jkec Tor 6e A . . '. Bafterzon. Utz

...- P.1t. Real.

-M i_5 CERTIFICATEOF SHOP UN'SPECTIONr Ulding's wOU4 69.9m.KaWomt NialO ot-SetaVOEW F" Use-;'

's S-B'-T- L'CO- Uartford,'Comicticut date VWPQK -:'Is ."sod.

on"We eat"I ofteceftdowe wicb oawA$-IWAt.C4d4r-Iraqi.'

.Ar'sk-ne % r U.0oftler &W we"Ver wall.* "r wentrAy. esp".%*d op em"We. "goo.

ma,". tit. rfP&M. rWOl&M0j9.IrAW4f ON& *~COW VA. NO WWIGyWW OJEtt 60 tb%$f 16 "i j6daw 60 NOW VWMGEM.

%hdwr ar weent 6mmilo, &W adaL44hoo or #~tted -am Su- Ism" a*&

VW.

V-1

-F-519 T-345 P-003/003 FEB~ 22 '01 12:

_~~~~~~~~~~~~~~~it

, R~i YE721d;a--

= ok~~~~~~e tsse<St-,p:@-s~~t-X4~~;;i~e£59D~ii' ell+-_3; = s'£>*-te .wad-?

-.- wS ' M~~~~~~~~~

'bod, t. gSg >7, z~-.ze

,;42v3D--ed-s-St;*--.-t;.*3 ede: X s ,eCR~toK^. :-- S -'4.062 1"-:ob <5336. :t: - .* .6~ Xt~=e .-

-Ss

,.;BG;-

. 9* b06 C~tli v.Al2F34* ..

o ~' * ;' -**7 3 *;-77dd;.

r Y: *-5 i;;*~~~~~~~k-37-jig~ij 'a -- a 'in th . 5Xc SW1 npiw~ wr.t ril -A

• T as-*.S*-4.

80*.000. s@

~~~~~~~~~~l -. .W- OD E30  ;-*;r!me E.'M is --6 cl;f th't Ne 'vfc~~~~ f; ito*-'hc -th * .*i ' r*'-e ha beenZ

'it --r: *X1965ad it n,~>S _-

=q~~~~~~~~~e . *: .: .

^ ,to^ ..X965tioi,. Sx~ .1967-*dcjd_'rif vtihe exCetlo .0t~ire *i~ii. t i eel

( FORM NIS-2 OWNER'S REPOFf- .OR REPAIRS OR REPLACEMENTS C

- As Required By The Provisions Of The ASME Code Section XI

1. Owner Duke Power Company Ia Date 3413 Address 52 S. Church Street, Charlotte NC 28201-1008 Sheetl of i

2. Plant Oconee Nuclear Station Address 7800 Rochester Eh. Sdneeai 8.C. 29672 2a. Unit 01 02 '13 OShared(specfyUnits) 3a. Work Order #OqS54 Q5 - 0 a3. Work Performed By Duke Power Company Repair Organization Job #

Address 528 S. Church Steet, Charlotte, NC 28201.1008 ;S ..

Type Code Symbol Stamp WA Authotatlon No. WA Expiration Date WA 3b. NSM or MM #

4. Ideniffication of System Pe:d U 4'If Io C la Qss--

5. (a) AppllcabieConstns cnCode n33.- 19ol_-EdMons- _ ; AcIdenda,  : ~ t Code Cases (b) Applicable Edition of Section XI W1tiized for Repairs or ReplacemenXt 1989, No Addenda (199:I through 1992 Addenda for Class MC and CC and their supports.) .

6. Idenffctica of Copont Repared or Rplaced and Roplcment Components

_ohnI Cokm 2 ColuM Co0umn4 OhuM 5 CO a Coun 7, Column manufacturer Nat'o'al YIear R e, ASME Code Name of Component Name of Manufacturer SeM Number Bor IdeticatIon BuIlt Rcd, Stamped

_ _ _ __ __ _ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ e__wb __ _ _ _R p a e nt (yes o r n o)

_Repaired z No ABBol . :J _ J'A__ OReplaced Yes ORepaired NO B 0 Replaced

_ _ _ _ _ _ _ _ _ _ _ ___ .,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - 0Repacem aent 0Yes ORepaired NO oReplaed

_ ___ __ _ _ _ _ _ _ ___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ .__ - 0 R eplac em e nt O Repaired 0 Yes 0 No D 0 Replaced

__ __ __ __ __ __ __ __ __ __ __ __ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _- _. _ O 0 Replacement ORepaired CN 0Y es OReplaced 0e ORepaired 0No F  :  :  ; = - a0 Replaced 0 Page l ot 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Ls 8 1/2 in. x 11 in. (2) Information In items 1 through 8 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7.DescriptionofWork4 pICLJ da) l l o nnI trr st on o t5kj)- 345 stokf..

8. Test Conducted: ( Hydrostatic E Pneumatic E Nominal Operating Pressure [ Other 1AExempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig Test Temp. 'IF

9. Remarkts /

(Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certi that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp WA Certificate of lion N. WA Expiration Date WA S~gne4 /(.;) <e AD Date, lo I z 103

.Ownb or Ownm s Designee, e CERTIFICATE OF INSERVICE INSPECTION 1.the undersigned, holding a valid coommIsion Sued by the National Board of Boller and Pressure Vessel Inspectors and the State or Providence of Aa a , and employed by have Inspected the components described In this Owners Report during the period 7-i-0.3.

to 7--fQ 03 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owners Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

W&31t4 C. Commissions lf./iM0 i3' In r's Signature National Board, State, Providence and Endorsements Date /- 0j3 e

Page 2 of 2

( I FORM NIS* OWNERS REPORL i FIPAIRS OR REPLACEMENTS As Required By The Provisions Of The ASIME Code SectionM

(

1. Owner Duke Power Company la. Date 2 Address 528. Church SteMe Chadott, NC 2821006

2. Plant OconeeNcearStaton L !Seet

/

Address 7800 Rochester HTy. Sneca S.C. 29672 2a. UnIt 01 02 013 0Shrd (spec Un )

3a Work Order # C - .0

3. Work Performed By Duke Power Company 10 Repair Organizfton Job #

Address 526 S.Church Stret, Chdtt KGNC 28M01.1-0O6 Type Code Symbol Stamp WA Authorzaton No. WA Explrat Date WA 3b,. NSM or MM# #_ __ __/__f

4. Identifaon of System. 1 7 41 A Cfasa.c=  ?

5. (a) AppMOable Consructlon CodeAtZa 3/ .27 19-&9 = . 2{/ . Addenda,:

(b)Applcable Edion ot Sedon XI lzed for RepaIrs or Replacemens 1989, oAddenda (1992 thogh l902 Addenda for Class MC and Cc and thelr supports. ) :

6. IdentIftcation of Components Repaird or Replaced and Replacement Component

_ ~ ch i -0tm . .~ . . . Cob ..

Oolunil . iO u 2 Colo= Co3t00 co s otM4 Cohnnn7 Colu Retpalred, ASM Cd Name of Component Name'of Manuf cture 01115? Repdceror Stamped

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ lW_ _ _ _ _ _ _ _ _ _ _ _

~~~

lllt Num ber Repl~~~~~~~~

ace me t ( es o o C

: . ,  :: : °O Re atsed 2 No

_ -0/4-0 . 'o .ri .9 ; 7, _O-  ? Re place Yes

:. 0 yes C  : < l - - OoReptaced Replaced 0 Ye B

I tj '50 IIJ6 A)IR~~~~~~~~~~~~~~~~~~~~ Al~~~-

Replced Repaeet 0Yes

,- __ ___ _ _ A .

- ~ ~ ~ ~ _

0 ~~yes

~

~~~~~~~~~~~~~~~feaie

~ ~ Oa1o

~~~~~~~~~~~~~~~~~~~~E

~ ~ ~ ~ ~ ~ ~ ~~ ~ ~ ~~~~~Pg 1of2ce

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 1s 8112 In. x 11 In. (2) InformatIon In items 1 through 6 on. this report Is Included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description of Work J 6 ' ' -o/A d -/

a Test Conducted: 0 Hydtostadc 0 Pneumatic 0 Nominal Operating Pressure I Other WrExempt Pressure _ _ psig Test Temp. eF Pressure _ _ psig Test Temp. OF Pressure _ _ _psig Test Temp. 'OF

9. Remarks (Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are correct and fth repair or replacement confms to the rules of the ASME Code, Section Xl l9pe Code Symbol Stamp WA CeepX~~nNo. WtA Expiration Date WA Dat7-1; NOt CERTIFICATE OF INSERVICE INSPECTION 1.the undersigned, holding a valid mission Issued Dy the Natlonal Board of Boller and Pressure Vessel Inspectors and the State or Providence of A6 I7V 6-Leo&AJ_ and employed by A'rd Cr have Inspected the components described In tfis Owners Report during the period .i&4%,/

tob 51AliD3 : and state that to the best of my knowxedge and beflef the Owner has peronned exami ons and taken corrective measures described Inthis Owners Report In accorlance with the requirements of the ASME Code, Section XL By signing Us certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, cOnceming the examinations and corrective measures described in this Owners ReporL Furthermore, neither the InSpector nor his employer shall be lable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspecton Commissions atoaBrdSae XpectorsSlgnature ~~~~Naffonal Board. State. Providence and Endorseme nts Date ..- /z1-A3 page 2 of 2

( FORM NIS2 OWNER'S REPOF 1 r-OR REPAIRS OR REPLACEMENTS (

As Requfred By The Provisions Of The ASME Code Section Xi 1.Owner Duke Power Company la. Date 5 &-2Q

2 Address 526 S.Church Stet Charlotte, NC 28201-1008 Shee L of L

2. Plant Oconee Nuclear Staton  :

Address 7800 Rochestet they. Bdneeaj $.C. 29672 2a. Unit 01i 02 g13 ' OShared(specffyUnlts )

38. Work*Order IRqCo l - ci1

3. Work Performed By Duke Power Company Repafr Organization Job #

Address 526 S. Church Street, Charlotte, NC 28201.1006 Type Code Symbol Stamp WA Authodzlon No. WA Expfratlon Date WA 3b. NSM or MM#

4. Identftication of Sytem_ _Y

5. (a) ApplIcable Constmucton Code.

, h

.- L clan __a 1 196Li Edition._- Addend, Code Cases (b) ApplicableEdtionofSectnXUtlllzedforRepalrsorReplaements1989,NoAddenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identcon of Components Repaired or Replaced and Replacement Components Columnn : Coumn 2 Columns a Ooumn 4 l olumn 001.6 Column? Column 8

,, : . . - ; 4 . .~Manuach Natlonal ya." Repatred, ASME Code Namei of Component Name of Manufactrr cturer

_o Mnfatrr Serlal Number Btonard Board Identificatlon___ Buitt feaced, or Repiaced orStmpeCde Smp A _____________ -

_________ OmM Nul ber ____r_;J A Replacm e ye orn o)

A R451 ~ Replaced

~~~~~~~~~~~~~~~~~~~~0 E Repaird 0 No C . t . . O Replacement 0 Yes

_ _ __ _ __ __ _ _ _ _ __ _ _ _ _ _ _ _ - ~ ~ ~ ~ ~ C Yes ORepairedO o D E _ _ _ _ _ _ _ _ _ _ _ - RRepPacet

~~~~~~~~~~~~~~~~~~~

0 e placed 0 F , ..  : - a~~~~~~~~~~~~~~

Repared 0 Repalred OOlNoNo F .1 O~~~~~~~~~~~~~~~~~~~~~~~

0N

_ _ _ _ _ _ _ _ _ _ _ _ _ _ __F_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _0 Rep lace me t0 e Page l of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 1/2 In. x 11 in. (2) InformatIon in items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work k6 g)' nag anJ (aQ) iW du con JI 3rYlc -I Ss body/ion S. Test Conducted: El HyWrostatic 0 Pneumatic E Nominal Operating Pressure El Other AlExempt Pressure _ _ psig Test Temp. OF Pressure _ _ psig Test Temp. OF Pressure _ _ psig Test Temp. OF

9. Remarks (Apptlcablb Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE i We cerify that the statements made In the report are correct and this repair or replacement conforms to the rles of the ASME Code, Section Xl.

7ape Code Symbol Stamp WA Expiration Date NIA Date 5-.a-a3 Owner,6r Owners Dsgnee~,Thite CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of A/oe*V CelaW - and employed by 1&47-have Inspected the components described In this Owners Report during the period XAZIe1 to s4LJ/L : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions AJC7+WJeZ4Ce Inspector's Signature National Board, State, Providence and Endorsements DateS/2o Page 2 of 2

( FORM NIS-2 OWNERS REPO a-1OR REPAIRS OR REPLACEME As Requied By The Provti1ons Of The ASME Code Section xi I I

(

1. Owr Duke Power Company Il.Date 5-a-20-63S Addr 526 S Church Street, Charlotte, NC 28201-1006 Sheet I of I

2. Plant Oconee Nulear Station Address 78b0 Rochester Hwy. Sdnecea S.C. 29672 2a. Unit 01I 02 1

$3 OShared(specifyUnits Ua. WorkOrder# 1C&4a9 572,1 r

3. Work Performed By Duke Power Company Repair Organization Job #

Address 528 Church Strewe Charlotte, NC 2820141008 Type Code Symbol Stamp WA Authozatlon No. WA Expiva Dat WA 3b. NSSMM OE ILM -M ,

4.Identi n of System[b, ?rdsurL rt C

5. (a) AppllcablConstrucion Cod 7 19 )E9 M o _ _ Addepda,. -

____ fCA5Q5 PocMa W\SY ___

(b) Applicable Edition of Section Xi Utilzed for Repairs or Replacements 1989, No Addeda through 1992 Addenda forClass MC and CC And their supports.) ^  :

6. Identification of Components Repaired or Replaced and Replacemt Components Cohlmn i Cohlun 2 Cohmn COumn 4 Cmn5 Cot 6 Cohmn7 Comn a Name of Component Name of Manufacturer Serial Nubr tonad BoaraNuater BIdentification Built Repard, Repicdo ASME Code Stamped

_______________ _______________ __N __b _ Replacement (yes or no)

B1. :: , ; i  :: 1-:. . 80ORepaired Replacd O No F31A jq16q Replacent Yes C B;.:  : . .

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~pl  ! i : t  :  : ;  : O~~~

Repme ~ ~O NoYes C .0 .;ORepatred Replaced O No

_____________ 0 O_____

Replacement 0 Yes ORepaired: O No D ReplacedI

~~~~~~~~~~~~~~~~~~~~~~~~~~~0

_ _ _ _ _ _ __ _ _ __ __ _ _ __ _ __ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ R E ye s ORepaired ONo E . . 0O Replaced

- . PageYe yes Repaired O 0 I ________

_______Replacement o Replaced C] Yes Page l.of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 In. x 11 In. (2) Information In items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. DescriptIon of Work my Of+ b 3L Wd/( I %JalVF_

64LJ 4'4' rec4wJ rod (k33 4w'nuts on'A(e. -in

& Test Conducted: [ Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure ] Other m Exempt Pressure psig Test Temp. OF Pressure psig Test Temp. OF Pressure psig TestTemp. OF

9. Remarks tJ IAP 4 5I/aoI23 (Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rules -.

of the ASME Code, Section Xl.

lype Code Symbol Stamp N/A Certificate of An No. WA Expiration Date N/A Signed P1 /Ls Date__________

.Owner dr Ownees Designee, U19 CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Providence of AJozrJ/ Of-A d.4 and employed by AI5SA 4 have inspected the components described In this Owners Report during the period Kaz'oo to A/2403  : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owners Report In accodlance with the requirements of the ASME Code,Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descnbed In this Owneres Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

Commissions Ce__W4A_____

Inspector's Signature National Board, State, Providence and Endorsements Date____ _r______

Page 2 of 2

q. FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS C,.~~~i (.

As Reqired By The Provisfons Of The ASbtE Code Section Xi

1. Owner Duke Power Company

,. o .

Address 526 S. Church Stet Charlotte, NC 28201-1008

2. Plant 1 O~onee Nuclear Station:

Address 7800 Rochester Hfwy. 8*dniea4 SC. 29672 2a. Unit 01Q 0 2 jX O Shared (spec Un )

3a. Work Order #, . . . .

3. Work Perfomled By Duke Power Company Repai Oranization Job #

Address 526 S. Church Stet, Charlotte NC 28201-1008 Type Code Symbol Stamp WA Authorzation No6 WA Exphiffon Dati WA 3b. NSM orfflA

4. IdentIfication of Sys" ) / i Af 72 1941,ir/A

5. (a) Appfcbe Construction Cod 4~z 19_&_ Ed Addenda,_2A-o Case (b) Appicable EdItIon of Sedon Xl lied for Repalrs or Replacements 1989, No Addenda (1992 through 1992 Addenda for Class MC and CC and theii mepports.)

6. Identification of Components Repaired or Reptaced and RepleCoomponens _ _

Oohmw~~t Ootun2r Ooan OetuOM 4 0otuM 5 001. ColUMn Colum a' Name of Component

_Name of ComponeMt Name Namo of Mnudchm 7 Manufacturer

Werall Ntnba Seril Ninib~'

National im~~~~Board umo Ietfcto rYBUMW Year ul Reard eivuO Rpuacment l M ASME Code Stamped (ye or no)

A

. $/ _______ se df 88+0 / No.

405' :

B P-/LX

_ i 3::<g/&6

/. IP i i. ..A fif I . . . 0El ~~~~~~~~~~~Reptaced

S do ORepaire

_ !. . .I- . . . O R9-lant O Yes 0 RepaIred O No

_ __ 7) &7__ _ 0 Replaced _

O3Repaired ONo 0; Replaced

. _ _ _ _ _ _ _ _ _ _ _ _ _ - ~0 Reptacement

~~~~~~~~~~~~~~~~~~~~~~~~O O YYe es ORepaired O No Replaced 0Ye F X Iq _  : O Reptaed ONo

_O ReplacP

: :: . o

• otof2

~~~~~~~~~~~~~~~Pa

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 In. x 11 In. (2) Information In items 1 through 6 on this report Is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this form.

7. Description Wbkq2'4 Worf U4X!5L L/5 3,Z ,?'l

8. Test Conducted: 0 Hydlostatic El Pneumatic ffNominal Operating Pressure 0 Other 0 Exempt Pressure psig Test Temp. A.l hi. °F Pressure _ _ psig Test Temp. OF Pressure - - -__psig Test Temp. OF

9. Remarks ZIcSZ!t . zg -59C2 (Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made Inthe report are correct and this repair or replacement conforms to the rues of the ASME Code,Section XI. ,

Type Code Symbol Stamp WA Cerbflcat of o apo. NIA, Expiration Date WA Sign j 0(/6 , W2 -5z. Datec..4tLi0O.

or ees Desl en, e CERTIFICATE OF INSERVICS INSPECTION 1.the undersigned, holdifig a valid comml edbthe Natonal Board of Boier and Pressure Vessel Inspectors and the State or Providence ofl and emp__yed by hush

____________ have Inspected the components descrbed in this Owner's Report during the period 6 es to 2-7-3.: and state that to thd best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this Owner's RepocL Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

- C.nriimicc1nrvAt /*- I1W A A WJC7 1

_, . ,....w_..._ -- I - - .- -

In~,eclor's SlgnatunY National Board, State, Providence and Endorsements Date 17 -0o3 Page 2 of 2

C FORM NIS-2 OWNER'S REPOR OR REPMFRS OR REPLACEMENTS C

. As Required By The Provisons OThASME Code Sectlon Xi 1.Owner Duke Por Company IS.Date _ If -_0__

Address 526 S.Church Street Charlott, NC 28201W1006 Shee of

2. Plant I Oconee Nuclear Station .I ...

Address 7800 Rochester Hey. Seneeai S.C. 29672 2a. Unit 0I :02. 373 0 Shared (specify Unts_ _ _._ ) to/

3a.Work Order#

3. Work Performed By Duke Power Compay. Repair OrganIzaion Job #

Address 528 S. Church Street, Charlotte, NC 28201.1006 Type Code Symbol Stamp WA Authlzaon No. WA Epiration DfteA Sb. NiSM oNA /7) 74,,

6ysfero )R m /;7 /4'?

4. Identification of

5. (a) Appiabnteuconri CdEd "E7_Ah7 o

Addenda,

? & t (b) Applicable EdMton of Sedon XI Utilzed for Repairs or Re lcnts 1F1o Addenda (1992 through 1992 Addenda for Class MC and CC and thelr supports.) c'. 4t °74 7N '

&' 1rlA Code Cases

6. Identification of Componnts Repaired or Replaced and Replacement Components Coun ChfumnI CdhumnS3omt Oohmn5 CKS. Oetifmn 7, colunwa Name of Component Name of Mnfacturer lerial Number Naioa IdentIflcat on li Im,)

Rpfrd, c r AECde

_ ,,'J~w(~'. .7'~ 0 Replcment 0 Yes

. .0 0 ..  : . . . Repaired O No B; .. .1 _ .  ;, O Replacednt Yes ORepafred 0 N C PI A/*"P. e6 Al AX_ wo O1Replaced

_ _ _ _ _ _ _ _ _ __________ _____ ________ ffl~~ ~ Ret ~ ~~ m eflL ~ ~ ~~Yes ORepte ONo

-F _ __ __ __ __ __ __ _ _ _ __ _ _ _ _ _ __ _ _ _ = __ __ __ __ __ _ _ 8_ _ ____ ____ _ -

0l Repae

- Repaired

~ 0 Y es 0

- E0 Repacmet Yes ORepafred Oo Page I of 2

.1

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8 1/2 in. x 11In. (2) Information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work G'%QU Q6 jZ /'  %

8. Tet Conducted: O Hydrostatic 0 Pneumatic X9 Nominal Operating Pressure 0 Other El Exempt Pressure __ psig Test Temp.

Pressure psig Test Temp. OF Pressure _ _ psig Test Temp. OF

9. Remarks 7f7 d~zkf 2/^8v~- '5/ C?

(Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this repair or replacement conforms to the ues of the ASME Code,Section XI.

Type Code Symbol Stamp WA Certoifca WA - Expiration Date WA ign~H t aWAMI 04 J'a4e,7"2

-Wul-Date2£ /ffi.d;7

.x... % .~1~11 JII(UL~IJI IIUU CERTIFICATE OF INSERVICE INSPECTION Alnn :=

1,the undersigned, holding a valid commIs;lo by Me hedNational Board of Boler and Pr*oure Vessel tls Inspectors and the State or Providence of and employed by 7 have Ine components descbed In this O er's Report during the period b to _7- 0 4 , : and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied.

concerning the examinations and corrective measures described In this Owner's RepotL Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

fat - :_

Cnmmk--'qinn-q 1Vt11109 09,&7 YT InAectors Signature w National Board, State, Providence and Endorsements Date 7 03 Page 2 of 2

-: C

( FORM NIS-2 OWNER'S REPORt.,,R REPAIRS OR REPLACEMENSM As Reqired By The Provistons Of The SISME Code Section XI'

1. Owner Duke Power Company Ila . . Da e _ _ _ _

Addrss 52 S.Church Street, Charlotte, NC 28201-1006

SheMet / ot /

2. Plant IOconee Nuclear Staton Address 7800 Rochester They. Senecai S.C. 29672 2a. UnIt 01 0 2 3 0 Shard (specfy U )

3a. Workc Order #

3. Work Perormed By Duke Power Company Repait Organization Job #

Address 526 S.Church Strt, Charlott, NC 28201100 Type Code Symbol Stamp NIA Authorzton No. IA Expraon Daft WA .3b. NSIVIor MM # -

/fa Pz.

4. Idenficatlon of Svst 6 5 h1Z Class

5. (a) Applcle Constructlon I1 Ed Edfeo r( Yo-/V M.'Ac _Code Cases (b) Applicable Edton of Section XI UtlIzed for Repair or Replacemernt 1989, No Addenda i MC and CC and their mupports):

6. Identcatlon of Components Repaired or Replaced and Replacement Cotponents colmn I cotumn2 COMMm

.~~~~~~~~~~~~~~~~~~~~~~~~~~~S#

.. CftfMn4 Coummns COLO

,., aColmn? cow"mnS Name of Component Name of Manufacturer NatlftmtBo I O RepaYrer StMpeCde

, _ Serial

_ _ _Number

_ _ _ _ _ Bdent~~

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __' _______f o r no )

V2W~~~~~~~~~~~~~~~~~~~2 ORepaired O No' A l~$ A 36 l l °tl*1o7g

_/? /^

C 0 ~~~~~~~~~~~~~~~~~~~~~

Repl aced C

70. _ _ _ _ _ _= _ _  ; l O R eP ai ed < N D P J  :  : T  : . Repaired

~~~~~~~~~~O O No.

D E  :

O~~

~ Replaement R epa e

~~~~~~~~~

0Replaced 0~~Yes 0 Yo ~~~~~0 E . 77 7:  : . ~~~~~~~~~~~O Fe ale O Rep ie 0 No

. .Repaf ^redP yes F O~~~~~~~~~~~~~~~~~~~~~~~~ Ye Page 1of 2

/

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size Is 8 112 In. x 11 In. -(2) Information In items I through 6 on this report-is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

7. Description of Work l&v Bait gPI / . zag A s'/ jt/

.Test Conducted: Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure El Other 0 Exempt Pressure J 2. psig Test Temp. XAD L OF Pressure psig Test Temp. OF psig Test Temp. 'F Q fl~~mi ~Prfr@

_ **w6zw

-i2 I-/f6 5-(Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE We certify that the statements made In the report are correct and this repair or replacement conforms to the rues of the ASME Code, Section Xi.

Type Code Symbol Stamp WA Certificate~o4Q~atb~lo. iMA A* _ExpiratIon Date WA Signt 9 I ft4 IF ^ - .r- -

I1nic DateNLO"A0--

\' %0"A1qr.'W %.FTIIAWN QP Wwalveluvo 41UP CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or ProvIdence of Al,"o 4fzac*w and employed by AXW Ca' have Inspected the components described h this Owneres Report durlng the period £4 7/d' to EI/ZOR2 and state that to the best of My knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report In accordance with the requirements of the ASME Code, Section Xl.

I By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the examinations and corrective measures described In this Owners Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection.

~ .Conmmksint At/><C11I24c Inspector's Signature National Board, State, Providence and Endorsements Date 715>3 Page 2 of 2

F,  !FA

1. 012057 ASME SECTION III VALVE DATA PACKAGE INDEX CUSTOMER: DUKE ENERGY CORPORATION ORDER No. ON40903 VELAN ORDER: P012-927410-N ITEM: 5/10 FIGURE No.4B15-1064C-13AA VALVE DESCRIPTION : 8"-300# BB SIS Cast Gate Valve (1-Dc) N-CLASS: 2 VI' I Tag: DMV-1295 I Duke Item: DMV-1295 I VLVrSIN.- #0112057 -1)

Page

1. Velan's Certificate of Compliance (Form QAM-09-01) 2

2. ASME Code Data Report NPV-1 34

3. Hydrostatic Test Report (Form QAM-09-05) 5-7

4. Electric Motor Actuator Report (Form QAM-9-06) N/A

5. Pneumatic Actuator Report (Form QAM-09-07) N/A

6. NDE Report (Form QAM-09-04) 8-25

7. Wall Thickness Report 26-27

8. CMTR and C of C, as applicable

a. Body (RTI: Z1771) 28-29

b. Bonnet (RT: Z1742) 30-31

c. Wedge (RT.: Z1739) 32-33

d. Bolting (Studs/Nuts) - Certificate of Compliance) 34

e. Stem 35

f. Hardface / Weld Filler Materials 36-41

9. Velan EI-117 / Material Change Request 42-43

10. Major Weld Repair Reports 44-46

11. Duke Power Form #930.1A 47 The records contained herein have been reviewed and approved for completeness and accuracy.

These records are considered as valid Quality Assurance Records and have been transmitted to the Owner.

Date: May 3, 2001 By: 'Al\

Form QAM-07.07 REV.0

VtgLAN #012057 4 CERTIFICATE OF COMPLIANCE

'ff-/CORPZCT

• I PAGE 2 l s~omer: DUKE ENE CORPORATION Velan Order. tM927410lN Item: 510010 Order No. ON409 I DUKE ITEM: DMV-1295

Description:

6-300# B3 GATE VALVE CAST; GJO Design Spec: L- 4*OSS40245.00-00004 Rev.2 / Figure No.: B16-1 064C-1 3AA Code Edition: L.4 EC.III EDmON 1983 ADDENDA: S - 84 Code Class; 2 Qty: I Dwq. No. P012-927410N01 Rev.: C Tag No.: DMV-1 295 COMPONEAT S/N I (T.*) HEAT I tt) MATERIAL SPEC CMTRI PT MTIUTIRTI I

BODY 132335-1 / *Z1771 FIo102 SA-351 CF8M X X X BONNET 153761 *Z1742 E86387 SA-351 CF8M X X X WEDGE 6151 1 Z1739 E86026/Code OCY SA-351 CF8M X X STEM 2CNW 4287H ASTM-479 S/S 316 X X STUDS T38730 SA-193 GR-B8M 'C of CATTACHEDY JUTS5 57S38 SA-194 GR-QM "C C ATTACHED-WELDS D84575A SFAS.S ER31 6L X X

. JS 082781A SFA6.9 ER316L X X HARDFAIAG 30005051 SFA5.13 RNiCr B X X HARDFAaCNG 30009302-1 SFA5#13 RWiCr-A X X HARJFACING 600208: 2K-2018 SFAS.13 RnlCr-A X X _ _

The above valvels) were manufactured In accordance wlth ( a)

1. Certificate of AuthWization N2797-21N) Expiry date: 20 APR. 2004

2. ( Corporate CLAM Revision 9 Dated: 14 MAR. 2001

3. 10CFR 50 Appendix B 7. VEL-QC-1 56, Rev. 17 Dated: 24 JUNE 1998

4. 10CFR Part 21. 8. VEL-QC-1 123, Rev. 11 Dated: 11 AUG. 2000 L-? 1X ASME/ANS1 B16.34 9. f VEL-QC-900, Rev. 9 Dated: 14 JAN.2000

6. > Pump & Valve Code 10. 'VEL-P-B28 Rev.3; VEL-P-688 Rev.4; t ASME SEC.II CODE EDITION 1989 ADDENDA: NONE Ataz been Pe ~.by 0pws lorve"firmdh /a 00pdano. wiho eCnfat. code and DOz~nT~v~~~?,m, Leaahable Chioddas eoniont:~a than ~

I QC Documentation Manager FOR~M COAM4-0-1 REV.2 QA.REPfSENTATIVE 7 DATE: 9-/8-01

_ , tRITu'u4FqERTIFICATE HlYLDOWS DATA REPORT FOR NUCLEAR PUMPS OnVA WES L.,, J:,r *'As R Bquirod by the Provisions of the ASME Code.Section III. Divislon I 9EVISED/C0RRTED* Pgaof 2

.550 HcARTH STRETr

1. Manufacturdend cetfled bVELiN I XONiM&t iQUiU lmmnd address of N C>>fleae Hldd rl

("A 01 2 057

2. Manufactured loDUKE E OE!CORP. OCOKE WNC STATION P.O.BOX 219, SEREPA,sc 29672 7 and address of Pevcmhber) ans t 1AX 13

• 3.Itl fPis~afla'oC E NUCL:EAR STATION 155 PXNWS SENECA SC. 39672 USA 3f( fJ&M 8d2 *BDL5.4a6=C..3AA ffInai and .ddtass) 4, Model No., Se No.,or Tpe. CRN /

5. ASPAE Code,Section III, Divislon 1: 1983 5tT&E-1984 2 N/A hedlton laddenda date) Idass) (Code Cesa no.)

6. Pump of valve Wonoinal Iodet Cl-, Outlet size

7. Mnteial: Body Bonnet________ D__

lsA366351r51 S193 66351 56351 CF8MCF8K ______

1CFOR-B8M W1 (a) lb) kl

( Id)

Cart. Ka%1 ~~~Body, somtet H~older'& Board Serial Serial SerdeI No. No. No. No.

Seial No.

1 Sq2476 6v 5i (Hea Ne, F111072 E861927 E86026/I, I" )

I ISupplemantal Ihtormeftn In form of OM, sktches..or drawings mey be used provtded 41)Stze"in x 11. 2) information in tem. I though 4 an tWe at. Report b Inchded on eachtinht. 131egch shoet It numbered and Vte number of sheet. is Weorded at the top of thistfr.n (121681 Thu. form (E000371 nity be obtained from the Order Oept., ASWE. 22 Low Drive. Box 2300. F NJ 07007-2300.

tefd.

a FORM NPV-1 (Back -Pg. 2 of 2 1  ; ... I II "GE

- _ I Certificate Holder's Serialon; Vn iilti ^;Dqfigfs

• 720 psI 10-0 F or valve pressure class °1) vpressure) . Itempersture)

9. Cold working pressure 720 psi at 100eF

10. Hydrostatictest 1125 ) psi. Disk ditferential test pressure N/A _

'- - psi (Sh*Lo)

4. .. C-A,. NOTE LINE #5. Dai~e-1: EXCEPT MATERIAL SPEC.SUPPLIED IS TO ASME SEC .I nMAIDIDA.

trap-fl, mnrT tfl flf viT~TMKTl

• I .S St~Ly tflQCQ P-~ ,

A11UflA.

ns, n Wfl)

- CERTIFICATION OF DESIGN Design Specifica fied by yR.L.WILLIAMS P.E. State NC, USA Reg. nordb1O Design Report certified by S.JTSBTTSKY P.E. State OUE..CANADAeg. n#ZZ11.

CERTIFICATE OF COMPUANCE We certify that the statements made In this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code,Section III. Division 1.

N Certificate of Authorization No.2797-2 (K) x Expi 20, 2004 nDate A#v 7 'I a F e AVELAN INC. S IN Certificate Holder}

J CERTIFICATE OF INSPECTION

1. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of and employed byREGIE DU BUTTIENT W QUE of QK EC have Inspected the pump, or valve, described In this Data Report on

£> (/OST/C 9 , and tate that to the best of my knowledge and belief, the Certificate Holder has con-structed this pump, or valve, In accordance with the ASME Code, Section IlIl, Division 1.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied. concerning the component described In this Data Report. Furthermore, neither the inspector nor his employer shalt be iable in any manner for any personal Injury or properamage or aloss of any kind arising from or connected with this inspection.

Date Signed Commissions 42(Q, Pfi I (AuthozedInspectod INat'l. 3d. (ind. endorsflesl ndtawe or prov. and no-I (1) For manually operated valves only.

C ( (

FORM N19S2 OWNER'S REPORT FOR ARSP OR REPLACEMENS As Required By The Provislons Oflthe ASME Code Section XI i

. 1. Owner Duke Power Company Ia Date Address 526 S. Church Strhet, Charlotte, NC 2820141006 Sheet L of I/

2. Plant ' Oconee Nuclear Station Address 7800 Rochester Hwy. Sonecai 5.C. 29672, 4U r 2a. Unit 01 02 : 0 Shared (specify Units )

3a. Work Order #

3. Work Performed By Duke Power Company Repair Organization Job #

Address 526 Church Street Charlotb, NC 28201.100, Type Code Symbol StAmAration Date WA 3b. NSM or MM#  :

I ::

4. Identification of System- Cla sZ

5. (a) Applicable Construction CodeAA6 / /. 19 _Edlton W A ddenda, t (b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989, No Addenda 1 (1992 through 1992 Addenda for Class MC and Code Cases CC and theirf support .)

6. Identification of Components Repalred or Replaced ard ReplaceUMnt Coponents

-~~~ .

Co.u Gni Ootmn 2 Cohmn 3 C; h4 ColamnS 7 :o Codumn? 8olMnS

_~~~~~~~~~~~~~~~~~~~~Ntoa

.earl .SM :Co_,,, ..  : de Name of Component Name of Manufactuhre Serial Numbor Yer ASMoCode

_____________ ~~~~~~~Number ______lcmn ysor no)

_r O Replaced 0 Yes A  : . . . 0O Replared Eii.OReptald O No E 0 000 0 0 _ = _ Yes D : 7 T T. F O Reptaird

.IO ge~~~~~~~~~0Rparaed 0 O No No C _ .07 7- Reptaied o Repa~red No D Replacedei

~~~~~~~~~~~~~~~~~~~~~~~~~~0 C e ORepared 0 No E O~~~~~~~~~~~~~~~~~~~~~~~~

- 0 RepLacement _____

.1 Repaired

~~~~~~~~~~~0 C No F O~~~~~~~~~~~~~~~~~~~~~~~~ 0 Page I of 2 ]I

Form NIS-2 (Back)

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size 1s 8 12 In. x 11 In. (2) information In items 1 through 6 on this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets Is recorded at the top of this forn.

of Work

7. Description ctZ / at / A  ;/4!g) eS

8. Test Conducted: )WHydrostatic 0 Pneumatic 0 Nominal Operating Pressure [ Other 0 Exempt Pressure /l Z psig Test Temp. F O0C/,

Pressure psig Test Temp. 'F Presstare psig Test Temp. T

9. Remarks (Applicable Manufacturers Data Records to be Attached)

CERTIFICATE OF COMPUANCE -

We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME Code, Section Xl.

Type Code Symbol Stamp WA Cerf ticatta 9 ~- WA . /Expiration Date WA t Owr yO~bes Desigree, Tr CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid comm! slsued I by the National Board of Boler anI Pgr re Vessel Inspectors and the State or Providence of &44 o and employed by have inspected the components described In this Owners Report during the period &-j407L to tr- < 2 :and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described Inthis Owner's Report In accorlance with the requirements of the ASME Code, Section Mi.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied.

concemig the examinations and corrective measures described In this Owners Report. Furthermore, neither the Anoctor nor his employer shall be liable In any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

AJe Insi:ctor's Signature 1/4 commissions_ __

National Board, State, Providence and Endorsements 2

Date _ ____ _

Page 2 of 2

C FORM MS12 OWNER'S REPORP-OR REP OR REPLACEM

(

I As Required By The Provisions Of The ASME Code Section XI

1. Owner Address Duke Power Compny 526 S.Church Street, Charlotte, NC 28201-1008 1a. Date I /3-O' Sheet L of J

2. Plant I Oconee Nuclear Station Address 7800 Rochester by. Bdueeaj 8.C¢ 29672 2a. Unit 1I 0 2: ;r3 OShared (specllUni 3a. Work Order # ' Y 5'7t -

3. Wor Perforimed By Duke Poner Compa Repair Ot~tnizaion Job#

Address 52 S. Church Street, Charlotte NC 28201.1008 Type Code Symbol Stamp WA Autoon No. A ExpIraonD A 3b. NSM or MM #_ ____

4. Identifrcation oftSy sAo m/e 4 Ag/ ,/. 7r f. /9?9

5. (a) ApplcableContuconCodes"__/1 e9.tEdion, Addenda __ X :_Code Cases (b) Applicable Edition of Section X Utilized for Repa or Replacemerts 1989, No Addenda (1992 through 1992 Addenda for Class MC and CC and their supports.)

6. Identification of Components Repaird or Replaced and Replacement Components _ _ _0

l - vOoT:nnniOot3a Co mm - Oou n . *:l Oolmn  : Oci 6 cohnn7 col mn

_ : T - . Nflon~~~~~~~~l YQ~~~r T lxd ~~~ASME Codo Name of Component Name of Manufctiurh anlumactue Numbtirlnfe_ RepaSE Conde Serall Number Idetbf cat oI uillo Sta mrped 0 Repaired jgNo 1 GY & ~ ~ ~ ~ ~ ~ lR_ _ _ __ _ _ _ b 0 __________ i elacement (Yesorno)

~~~~ e o~~~i B i~~ 13 ,; - : F 71eR 5?

~~~~ ~ ~ ~ l/47 ~ o~~~

• 9/ 7 iReplaced l 0No Yes

~~~~~

C ~~~~~~~~ DReplaced ~~~~~M0 O Repaired ONo

_ ._ " '. J;, ' , _' ' " "'  :' '_ _50_ '.' Y es A/A.

D ,47~ 4/~ 7Vf~ d..5f Q?6 AM /4 ff/31? 6 I wi ~ V/t - h 0 Yes oo

_ _ __ _ __ _ _ _ _ _ _ _ _~~~~~~~~~~~/ 7 0 R e p t a ROQ ep ir d _ _

O Repaired 0 No F  :  : '  :. O Repaced O Yes Page 1 of 2

Form NIS-2 (Back)

NOTE: Supplemental sheets In form of lists, sketches, or drawings may be used, provided (1) size

- 8s/2 In. x 11 In. (2) Information In items 1 through 6 on'this report is included on each sheet, and (3) each sheet Is numbered and the number of sheets is recorded at the top of this form.

7. Description of Woru GAJ K A'2W/ a s m e 8 Test Conducted: 0 Hydrostatic 0 Pneumatic 0 Nominal Operating Pressure 0 Other 0 Exempt Pressure 3000 psig Test Temp. MaOT 0F Pressure . psig Test Temp. OF

- Pressure _psig Test Temp. OF

9. Remarks , " 0't/.l __Z- 6 Y. 5. Z.,Esik' 7,g rJ dvb Z', - cAz'~ A<,M&

, ;;O7 2Z Dfc4, Al: 4 -1I

/;_--. 3C2Ft- - & , -=

(Applicable Manufacturer's Data Records to be Attached)

CERTIFICATE OF COMPLIANCE - \

We certify that the statements made In the report are correct and this repair or replacement conforms to the rules of the ASME C6de, Section Xl.

Type Code Symbol Stamp WA I corilaemzth /; 2 I Expiration Date WA son- a.-- I * -

• AZV xfa1vfiwe' N.yOwneK&Owhdr's

, Am Desighnee, TITiW Date>4g~g/gf6;25° )

CERTIFICATE OF INSERVICE INSPECTION 1,the undersigned, holding a valid P"mqsl a National Board of Bogler and P s)le Vessel Inspectors and the State or Providence of J and employed by 7-have Inspected the components described in this Owner's Report during the period o-;21-o3 to - and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described In this Owner's Report Inaccortlance with the requirements of the ASME Code, Section Xl.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations and corrective measures described In this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable Inany manner for any personal Injury or property damage or a loss of any kind arising from or connected with this Inspection.

1Leg aAV Commissions. /Ve-1169,0167 /

Inoectr's Signature "

T National Board, State, Providence and Endorsements 0

Date 2--o 3 Page 2 of 2

INGI 31OLLWDRESSER PUMP CO. ASSIMBLY R

.C "ORD OF MAJOR QCS.270 REV. 2 i

ENGINEERE1) PUMP GROUP PUMP COMPONENTS SERVICES BUSINIVS UNIT DATE; 09/15/96 CUSTOMER APPLICABLE CODE L4 JOB NUMBER 703-2713 PONUMBER 142860 DUKEENERGY CORP. - EDITIONF

.PUMP MFQ. INGERSOLL- ADDENDUM CLASS I

PUMP TYPE 2.SVHTh PUMP SN A RAND ITLM PARTNAMf Qty. DRAWING Pam Serial MR Heat . hose 0ider Matedl VERIIFICATION NuWomb" umber NO.

= MUIS /^~~~~~~~~52¢ NUMBER 7

'Number j rmw Number Specifcetioms Softa N)

I ORIFICE ASSEMBLY I 200D438RjRR.V. 1>9B21~,:

99SBU2713 3161L-- (A 2

3 ORIFICE ASSEMBLY ORFICE ASSEMBLY I 200D43"M 200D43M2 R1RV.

/V a .

.72 99SBU2713 73 oo 7_ _ _ 3I6L-316L, 5

wn LA)

I-4 0

COMNS . Eu4 _i~1 ~~~Set1o Pre Assembly Inspector AN[ Release for Assembly Hmrdware (If Requird)

D=e. _ =.X04/ / /- I Dat Q.A. Release for Ausmbly ( Hardwe ,~..~AAN Retease for Amsenbly Software ( If Required)

Date: Date Q.A. Release for Assmbly (Softw rejo), Assembly Inspector Date: e e:

W w-QCMIIQCS Forms Attachedtc:*4 shee I _of

FLOWSERVE PAGE 01/ol

-IZ14-08/2003 16: 02 571t04512284 64512264 FLOWSER-- PAG 6 /

C-1 if LI ~tI OC~Md A0d- //1 Ay&4P, i- J_

FLO)WSERVE PIump Divwisin 2300 JE. VERN~ON AME~ VERNO~s CA 90058 CERTMFCATFE OF CON-FONM-CxWC0MPLLA&M ((q0 I(n 1)

• revised. 4/08/2003 DATE: 02124 /nnn03 CUSTOMER:.- DUKE RFNF1RflIV MIP CUSTOMER ORDER NO.; NM 1198 %/

FLOWSERVE JOB NO.: 1RLCA01264-ORIGINAL SERAL NO.4 ._ 0169-13516(7.0370-23/4/S and 09,59-iWL This is to certiar that all parts supplied on this order wre m=nufature tested and Inspected to the spedficadons and/or drawings spcffiod in your purchase order gmd meet or exceed quality of parts origimauy finish in design, Mzatri and w . Part *= equivalent in form, -it and function and are completely luterchangcable With the existion oginI equipment furnished. The items supplied axe in

-'mpliance vith their Mplicable materiel specifioatioL AI~l the requiremets of your pvrcbase order have been complied with in their enirety unless othmtwise noted hezi.

200D438RX9 0010 QRMFCE ASSY. CM92QS13479-7 (FLOV RV- OTNOW RLSOOI 0 CTA1439460 FL -P/N061735127 0030 1 RUMIE ASSY. tP-49-B429-77 FLOWSEMLOT N..M&178) TAG# 4961-1 FL 3637,'O 0049- ORIFICE ASSY, CPM-9429-EA79-7 $

(FOUPMRVE LOT N& &~41 Z9) TAQ# 439461-1 FELS PIN 10673637,A Above parts were prod-gd ud Nuclear A. Pro Qur Oualiv Manual 3rd 13U. Rev. 0 Dated 4/1M0/2

.,Am5fdl864188 TiMAIS10 ",00W mtto

• • TOTAL PRGE.02 **

JAN 1-3 *`00 22:39 FR I NGBR-1_33L-IWIESSER 704 393 7296 TO 18646654001 P. 04/31 JI4' 04 'M1'4p P.2 Engetse!I.Dr~sier Pump Company Efte-"-ud P-p Gpo"p MIr~a I) 04 3A 99 Ingersoll-Dresser Pump Company (For Duke Oconee Nuclear Station)

Charlotte Repair Center 4616 Worth Place Charlotte, NC 26216 SUBJ3ECT: Certificate of Conforuance REFE~RENCE. Customer Order No.:

Job No.: 07963067 Item No. Deecr~iption D 001 2. *Orifice C Assembly- -2O0D436MX9)1v. 439461-1'-"~

S/N 99SBU2723-6~,-

B 002 ,2z Orifice -. C P14-9429- _,-

Assembly f2~O 8fi~8XIRev.

SIN's 995SU2713-72M("3-

• Certified Material Test Reports Attached Xngersoll-Dresser Pump Corapanyo Engineered Pump Group, hereby certifies that the supplies furnished on the above referenced order conform to the contract requirements, including specifications, drawings, packaging, packing and marking, and quality requirements. Thy refurbished unit is an exact replacement of the origkal unit and is equal to or better than originally suppliedr These parts are supplied in accordance Aykh Ingersoll-Dresser's AS*S B&PV Code Quality Assurance MHngf, Rev.20, dated 06/03/9g, and dedicated in accordance with E ft Procedure QNE-1 I DUKE POWER COMIPANY Bruce Barbe QA RECORDS APPROVED Quality C!nrol Technician Quality ntrol Department (M24-47J Iftgetrml4Und Pudih Wortlogla.1 fliaugr Sdesmga Jewmcni-$&nafd." ftmps

INGI ( AL-DRESSER PUMP CO.

ENGINEERED PUMP GROUP ASSEMBLY R ( RD OF MAJOR PUMP COMPONENTS QCS-270 REV. 2 D

(

SERVICES BUSINESS UNIT DATE: 09/15d6 CUSTOMER APPLICABLE CODE (A JOB NUMBER 7039-2713 PO NUMBER 142860 DUKE ENERGY CORP. __BDITJON_ OF PUMP MEQ. INGERSOLL- ADDENDUM CLASS_

PUMP TYPE 2.SVHTB PUMP S/N N/A RAND ITLM PART NAME Qty DRAWING pra Serial MRI Heat Purchase 0dr Maiterl VERIIFICATION NO. _ _ _ _ NUMBER Number Numbel Number Number lSpcifications .  :

S 99=---0 w.

- _____________ _ Ha1rdw are I ASSEMBLY _I 2ORIPCE RPV.

200043R -6 , 316L -

I ORIFICE ASSEMBLY I 200D438_X2_____7 99SLU271 316L 99SBU21713 3 ORIFICE ASSEMBLY I 200D438TX2M *73 316L

~0A

-I Pre Assembly Inspector AN[ Release for Assembly Hardwae (If Required)

Date: Date Q.A. Release for Assembly ( Hardwrr ... ~ ~AN[ Retease for Assembly Software ( If Required)

Date: A( & A f -"-

ZLj4 /2.33j4 q D _ _ _ _ __ _ _ _ __ _ _ _ __ _ _ _

Q.A. Release for Assembly CSoflwnre./ /91Assembly Inspector Date: &A-Itg/ 917 D.t:

4 77' wQ COMMENTS: . .S J  :

Sheet 1Aof

'-I6 QCMIQCS Form Attached: ____I f (A

6.0 Pressure Testing This summary is a pressure test completion status for the third period of the third ten-year interval. Table 6-1 shows the pressure tests completed from refueling outage EOC-19 through refueling outage EOC-20. There were no relevant conditions observed during these pressure tests.

Table 6-1 Total Examinations Examination Test Requirement Credited For This Outage Category B-E System Hydrostatic Test (IWB-5222) 1 B-P System Leakage Test (IWB-5221) 1 B-P System Hydrostatic Test (IWB-5222) 51 C-H System InservicelFunctional Test (IWC-5221) 6 C-H System Hydrostatic Test (IWC-5222) 21 A detailed description of each Examination Category listed above is located in subsection 6.1 of this report. Results of each Examination Category listed above are located in subsection 6.2 of this report.

1 A Category B-P hydrostatic test was performed on the Reactor Coolant System. Certain areas could not be hydro tested this outage and those areas received a Category B-P leakage test.

Outage 6/ EOC20 Page 1 of 5 Oconee Unit 3 Revision 0 Section 6 - Third Ten-Year Interval August 12, 2003

Table 6-2 shows a completion status of pressure tests conducted during the third period of the third ten-year interval Table 6-2 Total Total M()

Examination Test Requirement Examinations Examinations Examinations Category Required For CreditedFor Complete For This Period This Period This Period B-E System Hydrostatic 1 1 100%

Test (IWB-5222)

B-P System Leakage Test 1 02 0%

(IWB-5221)

B-P System Hydrostatic 9 52 55.56%

Test (IWB-5222)

C-H System 12 6 50%

Inservice/Functional Test (IWC-5221)

C-H System Hydrostatic 57 21 36.84%

Test (lWC-5222) 2 A Category B-P hydrostatic test was performed on the Reactor Coolant System. Certain areas could not be hydro tested this outage and those areas received a Category B-P leakage test. The Category B-P leakage test status for the period will remain at zero until the entire Class A system receives a leakage test.

Outage 6 / EOC20 Page 2 of 5 Oconee Unit 3 Revision 0 Section 6 - Third Ten-Year Interval August 12,2003

6.1 Required Examinations This Outage:

A listing of each pressure test and associated VT-2 Visual Examination conducted from EOC-19 through EOC-20 is included in this section.

The information shown below is a field description for the listing format included in this section of the report:

Zone Number = The unique number assigned to track certain systems or portions of systems that make up a pressure test.

Boundary Drawing = Detail drawing of pressure test boundary.

Required Test = Information that shows the required tests for the examination zone - (L) Leakage Test, (I) Inservice Test, (F) Functional Test, or (H) Hydrostatic Test.

System Name = Name of pressure retaining component system Required Inspection = Type of visual examination required.

Required Procedure = Required inspection procedure.

Plan Addenda = Serial Number of authorized change(s) to the pressure test plan.

ASME Item = ASME Section Xi Tables IWB-2500-1 (Class 1) and Number(s) IWC-2500-1 (Class 2)

Comments = General and/or Detail Description Outage 6 / EOC20 Page 3 of 5 Oconee Unit 3 Revision 0 Section 6 - Third Ten-Year Interval August 12, 2003

This Report Was Generated On:

C C 08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int = 3 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item j

Number Drawing L /I/F/H S% ystem Name Inspection Procedure Addenda Number(s) Comments OZ3H-16 O-ISIH-101A-3.4 X High Pressure Injection VT-2 QAL-15 03-PT-012 C7.40 None

_ _ _ ____ ___ _ __ ___ _ ___________ _ _ _______ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ C OZ3H-1A 0-ISIH-10OOA-3.1 X IReactor Coolant VT-2 QAL-15 None 615.11 B15.31 B15.51 B15.61 B15.71 O-ISIH-100A-3.1A X CRDM Nozzles & Incore Instrm. VT-2 QAL-15 None 84.12 84.13 O-ISIH-10OA-3.2 X Reactor Coolant VT-2 QAL-15 None 815.21 None 615.51 B15.71 O-ISIH-102A-3.3 X Reactor Coolant VT-2 QAL-15 None B15.51 None 815.61 815.71 0-ISIH-101A-3.1 X Reactor Coolant VT-2 QAL-15 None 615.51 BI15.71 C7.40 C7.80 O-ISIH-101A-3.4 X Reactor Coolant Vr-2 OAL-15 None B15.51 None 615.71 0-ISIH-102A-3.1 X Reactor Coolant VT-2 QAL-1IS None 615.51 None 6315.71 0-iSIH-102A-3.3 XRatr Coolant VT-2 QAL-15 None 815.51 None 815.71

This Report Was Generated On:

r- C.

08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int = 3 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item Mmmhar nrmAInn I IIi/IH Q,:tI.*am Meamn Inanno,4inn Ormiudafftra Ai4,an,4s Mh mmharIea t':nmmantc

-ISIH-I IOA-3.1 X Reactor Coolant VT1-2 l AL-15 None 1315.51 None 615.71 l-ISIH-11OA-3.4 X Reactor Coolant VT-2 QAL-15 None TB15.51 None B15.71 OZ3H-1X O-ISIH-102A-3.1 X Reactor Coolant V1T-2 QAL-15 None 6315.51 None 6_15.71 OZ3H-98 O-ISIH-102A-3.2 X Reactor Coolant Vr-2 QAL-15 None B15.51 None B15.71 l-ISIH-102A-3.3 X Reactor Coolant VT-2 AL-15 None l315.51 None 815.71 OZ3H--99 O-ISIH-102A-3.2 X Reactor Coolant VT-2 QAL-15 None 615.51 None 6315.71 O-JSIH-102A-3.3 X Reactor Coolant VT-2 QAL-15 None B15.51 None 8_.15.71 OZ3L-1 0-ISIL-i 00A-3.1 X Reactor Coolant VT-2 QAL-15 None 615.10 Class B portion of this 615.30 zone Is to compensate for B15.50 the required double B15.60 Isolation valve Class A B15.70 exam.

1 1 1 1 i I -

OISIL-100A-3.2 X Reactor Coolant VT-2 QAL-15 None B15.20 Class B portion of this 615.50 zone Is to compensate for B15.70 the required double isolation valve Class A exam. Previously Inspected as Item

This Report Was Generated On:

( C 08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int = 3 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item Niimher nrawinn.- -. F L I II/FIH

- - F - F - F RvstAm NamA Imn"ntinn Preniwi. ir

~~~~~~--------

AddAnda KNi mhArARI r-nmmonitA OZ3L-1 Number 615.050.001 O-ISIL-100A-3.3 X Reactor Coolant VT-2 QAL-15 None 615.50 Previously Inspected as 615.60 Item Number 6.15.70 B15.050.001 0-iSIL-101A-3.1 X Reactor Coolant VT-2 QAL-15 None 615.50 Class B portion of this B15.70 zone Isto compensate for C7.30 the required double C7.70 Isolation valve Class A exam. Previously Inspected as Item Number B15.050.001 0-ISIL-101A-3.4 X Reactor Coolant VT-2 QAL-15 None B15.50 Previously Inspected as 615.70 Item Number C7.30 B15.050.001 C7.70 O-ISIL-102A-3.1 X Reactor Coolant VT-2 QAL-15 None 815.50 Previously inspected as 815.70 Item Number B15.050.001 0-ISIL-102A-3.2 X Reactor Coolant VT-2 QAL-15 None B15.50 Previously Inspected as B15.70 Item Number B15.050.001 O-ISIL-102A-3.3 X Reactor Coolant VT-2 QAL-15 None 615.50 Previously inspected as B15.70 Item Number 615.050.001 O-ISIL-11OA-3.1 X Reactor Coolant VT-2 QAL-15 None 615.50 Previously inspected as B15.70 Item Number

This Report Was Generated On:

C. C.

08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Int = 3 Outage 20 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item Nhimhor nrfuAinAi CAl WuIISISI

.... -tJ I /IhIFW a5~

uvetfam Noma

- Inspection Procedure Addenda Number(s) Comments IXUUIU=I~~~ S - - - - *- . p p OZ3L-1 BI 5.050.001 i 4 - I - Ii i i O-ISIL-1 10A-3.4 X Reactor Coolant VT-2 QAL-15 None B15.50 Class B portion of this B15.70 zone is to compensate for the required double Isolation valve Class A exam. Previously inspected as Item Number BI 5.050.001

C This Report Was Generated On:

C (

08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int = 3 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item Number Drawinq L Il/FIH SYstem Name Inspection Procedure Addenda Number(s) Comments IZ3H-14A O-ISIH-IO1A-3.3 X High Pressure Injection Vr-2 QAL-15 None C7.40 None C7.60 C7.80 IZ3H-40 O-ISIH-109A-3.1 X Purification Demineralizers VT-2 QAL-15 None C7.40 None IZ3L-10 O-ISIL-IOIA-3.3 X High Pressure Injection VT-2 QAL-15 None C7.30 Previously Inspected as C7.70 Item Number C07.030.003 IZ3L-1i1 O-ISIL-101A-3.3 X High Pressure Injection VT-2 QAL-15 None C7.30 Previously Inspected as C7.70 Item Number C07.030.003 OZ3H-14B O-ISIH-IOIA-3.3 X High Pressure Injection VT-2 QAL-1S None C7.40 None C7.80 O-ISIH-101A-3.4 X High Pressure Injection VT-2 QAL-15 None C7.40 None C7.80 OZ3H-15 O-ISIH-101A-3.4 X High Pressure Injection VT-2 QAL-1 5 None C7.40 None C7.80 OZ3H-16 O-ISIH-IO1A-3.4 X High Pressure Injection VT-2 QAL-15 03-PT-012 C7.40 None C7.80 OZ3H-17 O-ISIH-101A-3.2 X High Pressure Injection Vr-2 QAL-15 03-PT-001 C7.40 None C7.80 OZ3H-18 O-ISIH-101A-3.2 X High Pressure Injection VT-2 QAL-15 03-PT-001 C7.40 None C7.80

This Report Was Generated On:

C C 08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Int - 3 Outage 20 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item Nh imher nrnwinn L I/1FIH vstam Name IQ% lnqnecftinn Proeurdure Addenda Numhbr6s) Comments OZ3H-1-9A 0-ISIH-IOIA-3.5 X High Pressure Injection VQ-2 QAL-15 None C7.40 None C7.80 O-ISIH-104A-3.1 X Spent Fuel Cooling VT-2 QAL-15 None C7.40 None C7.80 OZ3H-19B O-ISIH-IOIA-3.5 X High Pressure Injection VT-2 QAL-15 03-PT-015 C7.30 C7.70 OZ3H-1A O-ISIH-IOIA-3.1 X Reactor Coolant VT-2 QAL-15 None B15S.51 1B15.71 C7.40 C7.80 OZ31-1-2 O-ISIH-101A-3.1 X High Pressure Injection VT-2 QAL-15 None C7.40 None C7.80 Dl.12 O-ISIH-IOIA-3.4 X High Pressure Injection VT-2 QAL-15 None C7.40 None C7.80 DI.12 0-ISiH-I01A-3.5 X High Pressure Injection VT-2 OAL-15 None C7.80 None DI.12 OZ31--3 0-ISIH-101A-3.1 X High Pressure Injection Vr-2 QAL-15 None C7.40 None C7.80 OZ31--31A O-ISIH-102A-3.3 X LOW Pressure Injection Vr-2 QAL-15 None C7.40 None C7.80 OZ3H-31 B 0-ISiH-1 02A-3.3 x Low Pressure Injection VT-2 QAL-15 None C7.40 None C7.80

( C f This Report Was Generated On:

08/1212003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int a 3 Period a 3 Zone Boundary Required Test Required Required Plan ASME Item Number Drawina L /I/F/H SYFStem Name Insnection Procedure Addenda Number(s) Comments OZ3H-31C O-ISIH-102A-3.3 X Low Pressure Injection VT-2 QAL-15 None C7.40 None C7.80 OZ3H-39 O-ISIH-104A-3.1 X Spent Fuel Cooling VT-2 QAL-15 None C7.40 None C7.80 OZ3H-42A 0-ISIH-1 IOA-3.1 X Chemical Addition VT-2 QAL-15 None C7.40 None OZ3H-42B O-ISIH-11OA-3.1 X Chemical Addition VT-2 L AL-15 None C7.40 None C7.80 OZ3H-44 O-ISIH-121iD-1.2 X Emergency Feedwater VT-2 QAL-15 None C7.40 None C7.80 0-ISIH1110A-3.1 X Chemical Addition VT-2 QAL-15 None C7.40 None C7.80 0-ISIH-121B-3.3 X Feedwater VT-2 QAL-15 None C7.40 None C7.80 D2.12 0-ISIH-1218-3.5 X Feedwater VT-2 l QAL-15 None C7.40 None C7.80 D2.12 0-ISIH-121D-3.1 X Emergency Feedwater VT-2 QAL-15 None C7.40 None C7.80 D2.12 0-ISIH-122A-3.1 X Main Steam V17-2 QAL-15 None C7.40 None C7.80

This Report Was Generated On:

C c 08/12/2003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int a 3 Period a 3 Zone Boundary Required Test Required Required Plan ASME Item Number Drawina L /lI/F/H System Name Insoection Procedure Addenda Number(s) Comments OZ3H-6 O-ISIH-IOIA-3.1 X High Pressure Injection V1-2 QAL-15 None C7.40 None C7.80 O-ISIH-101A-3.2 X High Pressure Injection VT-2 QAL-15 None C7.40 C7.80 DI.12 0ISIH-109A-3.1 X Purification Demineralizers VT-2 QAL-15 None C7.40 None C7.80 OZ3H-64 O-ISIH-124B-3.2 X Low Pressure Service Water VT-2 QAL-15 None C7.40 None C7.80 OZ3H-65 O-ISIH-124B-3.4 X Low Pressure Service Water VT-2 QAL-15 None C7.40 None C7.60 C7.80 OZ3L-1 O-iSIL-10OOA-3.1 X Reactor Coolant VT-2 QAL-15 None B15.10 Class B portion of this B15.30 zone Is to compensate for B15.50 the required double B15.60 Isolation valve Class A B15.70 exam.

O-ISIL-100A-3.2 X Reactor Coolant VT-2 QAL-15 None B15.20 Class B portion of this B15.50 zone Is to compensate for 815.70 the required double isolation valve Class A exam. Previously Inspected as Item Number B15.050.001 O-ISIL-101A-3.1 X Reactor Coolant VT-2 QAL-15 None B15.50 Class B portion of this B15.70 zone Isto compensate for

This Report Was Generated On:

( c 08/1212003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int = 3 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item I III/Cl Kit imhr

• 'LI I *fJ~*

rnretilwnes

. -Ty* 51 1 F I.~5ISIVOL5S It.Iuff

. ~. .~~ ~ NiMma Queftar; ~~ ~ ~ ~ ~ ~

I..W Inangseinn 1--150 u. .j Drn&l

~*IS.IJ. tra

.5'1 Atirionflat 5S'VJLtIfA~

Mosmharfel ft,,mmanfe

~*r*I1*fS

- . I. ..

OZ3L-1 C7.30 the required double C7.70 isolation valve Class A exam. Previously Inspected as Item Number B15.050.001 O-ISIL-101A-3.4 X Reactor Coolant VT-2 QAL-15 None 615.50 Previously inspected as B15.70 Item Number C7.30 B15.050.001 C7.70 0-ISIL-1O0A-3.5 X Reactor Coolant VT-2 QAL-15 None C7.30 Class B portion of this C7.70 zone Is to compensate for the required double isolation valve Class A exam. Previously Inspected as Item Number B15.050.001 O-ISIL-127B-3.2 X Nitrogen Purge and Blanket VT-2 QAL-15 None C7.30 Class B portion of this C7.70 zone Is to compensate for the required double Isolation valve Class A exam. Previously Inspected as Item Number B15.050.001.

OZ3L-21 O-ISIL-102A-3.1 X Low Pressure Injection VT-2 QAL-15 None C7.30 Previously Inspected as C7.70 Item Number C07.030.006 OZ3L-28 O-ISIL-102A-3.2 X Low Pressure Injection VT-2 QAL-15 None C7.30 Previously Inspected as C7.50 Item Number

C This Report Was Generated On:

C '

08/1212003 Duke Power Company - Oconee Unit 3 Pressure Testing Zone Number Listing Outage 20 Int = 3 Period = 3 Zone Boundary Required Test Required Required Plan ASME Item Numhbr Drawina I II/FIH SvstAm NAmn Insnattinn Prmeekt iqr Arlddenda NKh umhArts0 (Cnmments OZ3L-7B

~~

8_

_ __2 _______zri i_

O-ISIL-101 A-3.3 x

___________ ___I____ ____I _______0_

High Pressure Injection Vr-2 QAL-15 None C7.30 Previously Inspected as C7.70 Item Number C07.030.003 4 4i4 44 O-ISIL-102A-3.2 x Low Pressure Injection VT-2 QAL-15 None C7.30 Previously Inspected as C7.70 Item Number C07.030.007

6.2 Examination Results For This Outage:

The results of each pressure test and associated VT-2 Visual Examination conducted from EOC-19 through EOC-20 are included in this section.

The information shown below is a field description for the Class I and Class 2 listing format included in this section of the report:

Zone Number = The unique number assigned to track certain extremity valves that make up a test Boundary Drawing = Detail drawing of pressure test boundary Outage = The number for the refueling outage cycle of this report Test Status = Complete or Partial Test Result = Clear (No Evidence Of Leakage), Reportable (Evidence Of Leakage - Not Through Wall such as packing leak),

Reportable (Evidence Of Through Wall Leakage)

VT-2 Examiner = The name of the Level II Visual examiner VT-2 Date = Date VT-2 visual examination was performed Outage 6 / EOC20 Page 4 of 5 Oconee Unit 3 Revision 0 Section 6 - Third Ten-Year Interval August 12, 2003

C r C

Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class = A Pressure Testing VT-2 Examination Results Boundary Zone Number Drawing Outage Test Status Test Result Test Pkg. No. VT-2 Examiner VT-2 Date OZ3H-16 O-ISIH-101A-3.4 20 Complete Clear 31fn-622 N/A 06105/2003 OZ3H-1A 0-IH-1OOA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-100A-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-10OA-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-10OA-3.3 20 Complete Clear 311m-625 NIA 06/06/2003 O-ISIH-IOIA-3.1 20 Complete Clear 311m-625 N/A 06106/2003 O-ISIH-101A-3.4 20 Complete Clear 311m-625 NIA 06/06/2003 O-ISIH-102A-3.1 20 Complete Clear 311m-625 NIA 06/06/2003 O-ISIH-102A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-10OA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-11OA-3.4 20 Complete Clear 311m-625 NIA 06/06/2003 OZ3H-1X O-ISIH-102A-3.1 20 Complete Clear 32fn-683 NIA 04/27/2003 OZ3H-98 O-ISIH-102A-3.2 20 Complete Clear 311m-625 N/A 06106/2003 O-ISIH-102A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3H-99 O-ISIH-102A-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-102A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3L-1 O-ISIL-10OA-3.1 20 Partial Clear 311m-625 NIA 06/06/2003

,class B portions off class one system O-ISIL-100A-3.2 20 Partial Clear 311m-625, N/A 06/06/2003 class B portions off class A Date: 08/12/2003

C C c Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class =A Pressure Testing VT-2 Examination Results Boundary Zone Number Drawing IOutage -

Test Status Test Result Test Pkg. No. VT-2 Examiner VT-2 Date O-ISIL-1 OOA-3.3 20 Complete Clear 31tm-625 N/A 06/06/2003 O-ISIL-101A-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-101A-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-1OIA-3.5 20 Complete Clear 311m-625 NIA 06/06/2003 O-ISIL-1IOA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-11 OA-3.4 20 Complete Clear 31 lm-625 N/A 06/06/2003 Date: 0811212003

C' C (

Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class = B Pressure Testing VT-2 Examination Results Boundary Zone Number Drawinq Outaae Test Status Test Result Test Pkg. No. VT-2 Examiner VT-2 Date IZ3H-14A 0-ISIH-101A-3.3 20 Complete Clear 32fn-629 N/A 05/30/2003 IZ3H-40 0-ISIH-109A-3.1 20 Complete Clear 32sin-660 N/A 06/03/2003 IZ3L-10 0-ISIL-I01A-3.3 20 Complete Clear 32f-633 N/A 04/28/2003 IZ3L-1 I 0-ISIL-IOIA-3.3 20 Complete Clear 32f-632 N/A 04/26/2003 OZ3H-14B 0-ISIH-101A-3.3 20 Complete Clear 32fn-629 N/A 05/30/2003 0-ISIH-101A-3.4 20 Complete Clear 32fn-629 N/A 05/30/2003 OZ3H-15 0-ISIH-101A-3.4 20 Complete Clear 31 lm-625 N/A 06/06/2003 OZ3H-16 0-ISIH-IOIA-3.4 20 Complete Clear 31fn-622 N/A 06105/2003 OZ3H-1 7 O-ISIH-101A-3.2 20 Complete Clear 32sn-628 N/A 06/03/2003 OZ3H-18 0-ISIH-IOIA-3.2 20 Complete Clear 32sn-627 N/A 06/03/1903 OZ3H-19A 0-ISIH-101A-3.5 20 Complete Clear 32fn-630 NIA 06/01/2003 0-ISIH-104A-3.1 20 Complete Clear 32fn-630 N/A 06/01/2003 OZ3H-19B 0-ISIH-101A-3.5 20 Complete Clear 32fn-630 N/A 06/01/2003 OZ3H-1A 0-ISIH-101A-3.1 20 Complete Clear 31 lm-625 N/A 06/06/2003 OZ3H-2 0-ISIH-101A-3.1 20 Complete Clear 32sn-624 N/A 06/06/2003 0-ISIH-IOIA-3.4 20 Complete Clear 32sn-624 N/A 06/06/2003 0-ISIH-101A-3.5 20 Complete Clear 32sn-624 N/A 06/06/2003 OZ3H-3 0-ISIH-IOIA-3.1 20 Complete Clear 31 lm-625 N/A 06/06/2003 OZ3H-31A 0-ISIH-102A-3.3 20 Complete Clear 32sn-631 N/A 04/26/2003 OZ3H-31 B 0-ISIH-102A-3.3 20 Complete Clear 32sn-631 N/A 04/26/2003 OZ3H-31 C 0-ISIH-102A-3.3 20 Complete Clear 32sn-631 N/A 04/26/2003 OZ3H-39 O-ISIH-104A-3.1 20 Partial Clear 32hr-598 N/A 05/18/2003 OZ3H-42A 0-ISIH-104A-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 Date: 08/12/2003

C," f C Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class = A Pressure Testing VT-2 Examination Results Boundary VT-2 Zone Number Drawing Outage Test Status Test Result Test Pkg. No. Examiner VT-2 Date OZ31-1-16 20

_-ISIH-1A-3.4 Complete Clear 3_fn-622 N/A 06/05/2003 OZ3H-1A O-ISIH-101A-3.1 20 Complete Clear 311m-625 N/A 06/08/2003 O-ISIH-100A-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-100A-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-100A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-IOIA-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-101A-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-102A-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-102A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-IIOA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-1IOA-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3H-1X O-ISIH-102A-3.1 20 Complete Clear 32fn-683 N/A 04/27/2003 OZ3H-198 O-ISIH-102A-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-102A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 OZ31-1-99 O-ISIH-102A-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIH-102A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3L-1 O-ISIL-100A-3.1 20 Partial Clear 311m-625 Class B portions off N/A 06/06/2003 Class A O-ISIL-100A-3.2 20 Partial Clear 311m-625 N/A 06/06/2003 Class B portions off Class A O-ISIL-100A-3.3 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-101A-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-101A-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-101A-3.5 20 Complete Clear 311m-625 N/A 06/06/2003 Date: 08/12/2003

C C Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class =A Pressure Testing VT-2 Examination Results Boundary VT-2 Zone Number Drawing I Outage -

Test Status _ ..

Test Result Test Pkg. No. Examiner VT-2 Date O-ISIL-11OA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-11OA-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 Date: 08112/2003

( 'C Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class = B Pressure Testing VT-2 Examination Results Boundary VT-2 l

Zone Number Drawing Outage Test Status Test Result Test Pka. No. Examiner VT-2 Date IZ3H-14A IZ3H-14A O-ISIH-101A-3.3 20 Complete Clear 32fn-629 N/A 05/30/2003 IZ3H-40 O-ISIH-109A-3.1 20 Complete Clear 32sin-660 N/A 06/03/2003 IZ3L-10 O-ISIL-IOIA-3.3 20 Complete Clear 32f-633 N/A 04/26/2003 IZ3L-1i1 O-ISIL-I01A-3.3 20 Complete Clear 32f-632 N/A 04/26/2003 OZ3H-14B O-ISIH-101A-3.3 20 Complete Clear 32fn-629 N/A 05/30/2003 O-ISIH-101A-3.4 20 Complete Clear 32fn-629 N/A 05/30/2003 OZ3H-15 0-ISIH-IOIA-3.4 20 Complete Clear 31 1m-625 N/A 06/06/2003 OZ3H-16 0-ISIH-101A-3.4 20 Complete Clear 31fn-622 N/A 06/05/2003 OZ3H-17 O-ISIH-101A-3.2 20 Complete Clear 32sn-628 N/A 06/03/2003

= . .

OZ3H-18 0-ISIH-IOIA-3.2 20 Complete Clear 32sn-627 N/A 06/0311903 OZ3H-19A 0-ISIH-101A-3.5 20 Complete Clear 32fn-630 N/A 06/01/2003 0-ISIH-104A-3.1 20 Complete Clear 32fn-630 N/A 06/01/2003 OZ3H-19B 0-ISIH-101A-3.5 20 Complete Clear 32fn-630 N/A 06/01/2003 0Z3H-1A 0-ISIH-IOIA-3.1 20 Complete Clear 31 1m-625 N/A 06/06/2003 OZ3H-2 0-ISIH-IOIA-3.1 20 Complete Clear 32sn-624 N/A 06/06/2003 0-ISIH-IOIA-3.4 20 Complete Clear 32sn-624 N/A 06/06/2003 0-ISIH-I01A-3.5 20 Complete Clear 32sn-624 N/A 06(06/2003 OZ3H-3 0-ISIH-IOIA-3.1 20 Complete Clear 31 lm-625 N/A 06/06/2003 OZ3H-31A 0-ISIH-102A-3.3 20 Complete Clear 32sn-631 N/A 04/26/2003

::: : V SSS S ... .

OZ3H-31 B 0-ISIH-102A-3.3 20 Complete Clear 32sn-631 N/A 04/26/2003 OZ3H-31C 0-ISIH-102A-3.3 20 Complete Clear 32sn-631 N/A 04/26/2003 OZ3H-39 0-ISIH-104A-3.1 20 Partial Clear 32hr-598 N/A 05/18/2003 OZ3H-42A 0-lSlH-I11OA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 Date: 08/12/2003

,6e"f' (i

CN Current Interval = 3 Current Period = 3 Duke Power Company - Oconee Unit 3 Class = B Pressure Testing VT-2 Examination Results Boundary VT-2 Zone Number Drawing Outaae Test Status Test Result Test Pkg. No. Examiner VT-2 Date OZ3H-42B O-ISIH-1 1OA-3.1 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3H-44 O-ISIH-121D-1.2 20 Complete Clear 32sm-655 N/A 06/07/2003 O-ISIH-1 10A-3.1 20 Complete Clear 32sm-655 N/A 06/07/2003 O-ISIH-121B-3.3 20 Complete Clear 32sm-655 N/A 06/07/2003 O-ISIH-121B-3.5 20 Complete Clear 32sm-655 N/A 06/07/2003 O-ISIH-121D-3.1 20 Complete Clear 32sm-655 N/A 06/07/2003 O-ISIH-122A-3.1 20 Complete Clear 32sm-655 N/A 06/07/2003 OZ3H-6 O-ISIH-IO1A-3.1 20 Complete Clear 32sn-626 N/A 06/03/2003 O-ISIH-IOIA-3.2 20 Complete Clear 32sn-626 N/A 06/03/2003 O-ISIH-109A-3.1 20 Complete Clear 32sn-626 N/A 06/03/2003 OZ3H-64 O-ISIH-1248-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3H-65 O-ISIH-124B-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3L-1 O-ISIL-10OA-3.1 20 Partial Clear 311m-625 Class B portions off N/A 06/06/2003 Class A O-ISIL-1OOA-3.2 20 Partial Clear 311m-625 N/A 06/06/2003 Class B portions off Class A O-ISIL-IOIA-3.4 20 Complete Clear 311m-625 N/A 06/06/2003 O-ISIL-127B-3.2 20 Complete Clear 311m-625 N/A 06/06/2003 OZ3L-21 O-ISIL-102A-3.1 20 Complete Clear 32fn-683 N/A 04/27/2003 OZ3L-28 O-ISIL-1 02A-3.2 20 Complete Clear 32f-636, 32fr-635 N/A 06/03/2003 OZ3L-7B O-ISIL-101A-3.3 20 Complete Clear 32fm-549 N/A 06/03/2003 O-ISIL-102A-3.2 20 Complete Clear 32fm-549 N/A 06/03/2003 Date: 08/1212003

6.3 ReDortable Indications:

None Outage 6/ EOC20 Page 5 of 5 Oconee Unit 3 Revision 0 Section 6 - Third Ten-Year Interval August 12, 2003