ML022770316

From kanterella
Jump to navigation Jump to search

Technical Specifications, Revise Average Planar Linear Heat Generation Rate for GE14 Fuel
ML022770316
Person / Time
Site: Monticello Xcel Energy icon.png
Issue date: 10/02/2002
From:
NRC/NRR/DLPM/LPD3
To:
Nuclear Management Co
References
TAC MB3187
Download: ML022770316 (1)


Text

I.

I 3.0 LIMITING CONDITIONS FOR OPERATION 4.0 SURVEILLANCE REQUIREMENTS i 4.11 REACTOR FUEL ASSEMBLIES 3.11 REACTOR FUEL ASSEMBLIES Applicability:

Applicability:

The Limiting Conditions for Operation associated with the The Surveillance Requirements apply to the parameters fuel rods apply to those parameters which monitor the fuel which monitor the fuel rod operating conditions.

rod operating conditions.

Objective: Objective:

The objective of the Limiting Conditions for Operation is to The objective of the Surveillance Requirements is to specify assure the performance of the fuel rods. the type and frequency of surveillance to be applied to the Specifications: fuel rods.

Specifications:

A. Averaae Planar Linear Heat Generation Rate (APLHGR)

A. Average Planar Linear Heat Generation Rate (APLHGR)

During two recirculation loop power operation, the APLHGR for each type of fuel as a function of average The APLHGR for each type of fuel as a function of planar exposure shall not exceed the applicable limiting average planar exposure shall be determined daily values specified in the Core Operating Limits Report. during reactor operation at >_25% rated thermal power.

When hand calculations are required, the APLHGR for each type of fuel as a function of average planar exposure shall not exceed the limiting value for the most limiting lattice (excluding natural uranium) provided in the Core Operating Limits Report.

During one recirculation loop power operation, the APLHGR limiting condition for operation for each type of fuel shall not exceed the most limiting of:

a. The above values multiplied by 0.80 for GEl1 and I b.

GE12 fuel and 0.90 for GE14 fuel, or The above values multiplied by the appropriate flow and power dependent correction factors provided in the Core Operating Limits Report.

3.11/4.11 211 Amendment No. 54, 7-0, 88, 97, 100, 131