The following report was excerpted from an e-mail:
Product: Ametek Solidstate Controls Analog Oscillator, printed circuit board part number 80-9230404-90
A single unit, Ametek part number 80-9230404-90, was shipped to Exelon Dresden Station on the reference purchase order has an incorrect capacitor installed. This error was identified during testing of a subsequent identical part. Ametek reviewed all printed circuit boards built under that run and verified all affected printed circuits boards less one, were still in house. This shipment was made on October 26, 2016. Ametek contacted Exelon Dresden immediately upon identification of the incorrect part installation and Exelon was able to have the board retrieved from their inventory. Ametek Solidstate Controls is submitting this notification as a precaution under the requirements of 10 CFR Part 21, but considers it a limited incident as the single defective part was isolated and the board is in the process of being returned. No further action is required and this notification does not affect any other installation, client, inventory, or equipment provided by Ametek.
- * * UPDATE AT 0921 ON 11/23/16 EST FROM ETHAN SALSBURY TO JEFF HERRERA * * *
The following report is an excerpt from an email received:
Ametek reviewed all the printed circuit boards built under that run and verified all affected printed circuits boards less one, were still in house. The single affected board was shipped to Exelon Generation Company, Byron warehouse on purchase order # 00588294 and Ametek sales order #46001912. This shipment was made on October 26, 2016.
Ametek contacted Exelon Byron immediately upon identification of the incorrect part installation and Exelon was able to have the board retrieved from the inventory.
Notified R3DO (McCraw) and Part 21/50.55 (via email).