|
|---|
Category:Legal-Affidavit
MONTHYEAR2CAN102402, Enclosure 2: Framatome Affidavit2024-10-20020 October 2024
Enclosure 2: Framatome Affidavit
1CAN122301, Responses to Request for Additional Information for Request for Alternative for Implementation of Extended Reactor Vessel Inservice Inspection Interval (ANO1-ISl-037)2023-12-14014 December 2023
Responses to Request for Additional Information for Request for Alternative for Implementation of Extended Reactor Vessel Inservice Inspection Interval (ANO1-ISl-037)
1CAN062301, Request for Alternative for Implementation of Extended Reactor Vessel Inservice Inspection Interval (ANO1-ISI-037)2023-06-0808 June 2023
Request for Alternative for Implementation of Extended Reactor Vessel Inservice Inspection Interval (ANO1-ISI-037)
ML23020A9442023-01-20020 January 2023
Enclosure 3: Affidavit
2CAN122103, Relief Request ANO2-RR-21-002, Half-Nozzle Repair of Reactor Vessel Closure Head Penetration 46 - Submittal of Analyses - Affidavits and Calculation Summary Sheet2021-11-19019 November 2021
Relief Request ANO2-RR-21-002, Half-Nozzle Repair of Reactor Vessel Closure Head Penetration 46 - Submittal of Analyses - Affidavits and Calculation Summary Sheet
2CAN102102, Relief Request ANO2-R&R-012: Support the Repair of the Reactor Vessel Closure Head Penetration 462021-10-10010 October 2021
Relief Request ANO2-R&R-012: Support the Repair of the Reactor Vessel Closure Head Penetration 46
0CAN092101, Unit 2 - Revised Proprietary Demarcation in Response to Request for Additional Information (Follow-up) - Proposed Alternative to ASME Section XI Requirements for Repair/Replacement of Emergency Cooling Pond Supply Piping2021-09-14014 September 2021
Unit 2 - Revised Proprietary Demarcation in Response to Request for Additional Information (Follow-up) - Proposed Alternative to ASME Section XI Requirements for Repair/Replacement of Emergency Cooling Pond Supply Piping
0CAN052103, Presentation Information for Pre-Submittal Meeting Regarding the Response to Request for Additional Information - Proposed Alternative to ASME Section XI Requirements for Repair/Replacement of Emergency .2021-05-25025 May 2021
Presentation Information for Pre-Submittal Meeting Regarding the Response to Request for Additional Information - Proposed Alternative to ASME Section XI Requirements for Repair/Replacement of Emergency .
0CAN022101, Response to Request for Additional Information - Proposed Alternative to ASME Section XI Requirements for Repair/Replacement of Emergency Cooling Pond Supply Piping2021-02-22022 February 2021
Response to Request for Additional Information - Proposed Alternative to ASME Section XI Requirements for Repair/Replacement of Emergency Cooling Pond Supply Piping
2CAN032001, Response to Request for Additional Information Related to License Amendment Request to Revise the Control Element Assembly Drop Times2020-03-11011 March 2020
Response to Request for Additional Information Related to License Amendment Request to Revise the Control Element Assembly Drop Times
1CAN121601, Arkansas Nuclear One Unit 1, Update to Evaluations Described Response to Request for Additional Information 14(a) Reactor Vessel Internals Aging Management Program Plan2016-12-21021 December 2016
Arkansas Nuclear One Unit 1, Update to Evaluations Described Response to Request for Additional Information 14(a) Reactor Vessel Internals Aging Management Program Plan
1CAN121601, Update to Evaluations Described Response to Request for Additional Information 14(a) Reactor Vessel Internals Aging Management Program Plan2016-12-21021 December 2016
Update to Evaluations Described Response to Request for Additional Information 14(a) Reactor Vessel Internals Aging Management Program Plan
1CAN121502, Evaluations Described Response to Requests for Additional Information 3, 5, 6(a), and 7, Reactor Vessel Internals Aging Management Program Plan2015-12-30030 December 2015
Evaluations Described Response to Requests for Additional Information 3, 5, 6(a), and 7, Reactor Vessel Internals Aging Management Program Plan
ML15278A0242015-09-28028 September 2015
Attachment 2, Areva Document ANP-3417NP, Revision 0, MRP-227-A Applicant / Licensee Action Item No. 7 Analysis for Arkansas Nuclear One, Unit 1 (Non-Proprietary), Attachment 3, Affidavit, and Attachment 4, List of Commitments
2CAN051504, Revised Affidavit for Request for Relief ANO2-ISI-0162015-05-19019 May 2015
Revised Affidavit for Request for Relief ANO2-ISI-016
1CAN031504, Arkansas Nuclear One, Unit 1 - Responses to Request for Additional Information on Update of the Reactor Coolant System Pressure and Temperature and the Low Temperature Overpressure Protection System Limits2015-03-25025 March 2015
Arkansas Nuclear One, Unit 1 - Responses to Request for Additional Information on Update of the Reactor Coolant System Pressure and Temperature and the Low Temperature Overpressure Protection System Limits
1CAN031504, Responses to Request for Additional Information on Update of the Reactor Coolant System Pressure and Temperature and the Low Temperature Overpressure Protection System Limits2015-03-25025 March 2015
Responses to Request for Additional Information on Update of the Reactor Coolant System Pressure and Temperature and the Low Temperature Overpressure Protection System Limits
ML15041A0742015-02-0606 February 2015
ANP-3300Q1NP, Rev. 0, Response to Request for Additional Information on Reactor Coolant System Pressure/Temperature and Low Temperature Overpressure Protection System Limits to 54 EFPY for Arkansas Nuclear One, Unit 1, Attachment 2 to 1CAN0
2CAN111402, Unit 2, Revised Affidavit for Request for Relief ANO2-ISI-0162014-11-11011 November 2014
Unit 2, Revised Affidavit for Request for Relief ANO2-ISI-016
2CAN041402, Successive Examination Plans, Request for Relief ANO2-ISI-016. Weld Scan Plans & Preliminary Coverage Estimates, Pdqs Number 783 & Affidavit Enclosed2014-04-15015 April 2014
Successive Examination Plans, Request for Relief ANO2-ISI-016. Weld Scan Plans & Preliminary Coverage Estimates, Pdqs Number 783 & Affidavit Enclosed
0CAN041401, NRC Augmented Inspection Team Follow-up Inspection Report 05000313/2013012 and 05000368/2013012; Preliminary Red and Yellow Findings2014-04-0101 April 2014
NRC Augmented Inspection Team Follow-up Inspection Report 05000313/2013012 and 05000368/2013012; Preliminary Red and Yellow Findings
0CAN071303, Units 1 and 2, Augmented Inspection Team Information Request2013-07-31031 July 2013
Units 1 and 2, Augmented Inspection Team Information Request
ML12038A1772012-02-0303 February 2012
Units 1 and 2, HI-STORM 100 Cask System, Thermal Validation Test Using Air Mass Flow Rate
ML0935005322009-12-11011 December 2009
Affidavit from Gayle F. Elliot, Manager of Product Licensing for Areva, Np Inc
ML0828300342008-08-20020 August 2008
Affidavit of Gayle F. Elliott, for Areva Np Inc., Regarding NRC Presentation of August 2008
ML0627703182006-09-28028 September 2006
Transmittal of Draft Slide Presentation for Nrc/Entergy/Westinghouse Pre-Submittal Meeting (Proprietary/Non-Proprietary)
ML0514603882005-05-10010 May 2005
Units 1 and 2, Request for Additional Information Concerning Request for Exemption from Holtec International Certificate of Compliance
2CAN010402, Revisions to Wesdyne Proprietary Reports in Support of Relaxation from Performing a Bare Metal Visual Inspection2004-01-16016 January 2004
Revisions to Wesdyne Proprietary Reports in Support of Relaxation from Performing a Bare Metal Visual Inspection
ML15350A2151985-09-0505 September 1985
Overview Description of Core Operating Limit Supervisory System (Colss)(Rev 00-NP to CEN-312-NP)
2024-10-20
[Table view] |
Text
Enclosure 2
2CAN102402
FRAMATOME AFFIDAVIT
A F F I D A V I T
- 1. My name is Gayle Elliott. I am Director, Licensing and Regulatory Affairs, for
Framatome Inc. (Framatome) and as such I am authorized to execute this Affidavit.
- 2. I am familiar with the criteria applied by Framatome to determine whether
certain Framatome information is proprietary. I am familiar with the policies established by
Framatome to ensure the proper application of these criteria.
- 3. I am familiar with the Framatome information contained in ANP-4132P-000,
entitled, Arkansas Nuclear One, Unit 2 Relief Request for Half Nozzle Repair of RVCH
Penetration #71, dated October 2024 and referred to herein as Document. Information
contained in this Document has been classified by Framatome as proprietary in accordance with
the policies established by Framatome for the control and protection of proprietary and
confidential information.
- 4. This Document contains information of a proprietary and confidential nature
and is of the type customarily held in confidence by Framatome and not made available to the
public. Based on my experience, I am aware that other companies regard information of the
kind contained in this Document as proprietary and confidential.
- 5. This Document has been made available to the U.S. Nuclear Regulatory
Commission in confidence with the request that the information contained in this Document be
withheld from public disclosure. The request for withholding of proprietary information is made in
accordance with 10 CFR 2.390. The information for which withholding from disclosure is
requested qualifies under 10 CFR 2.390(a)(4) Trade secrets and commercial or financial
information.
- 6. The following criteria are customarily applied by Framatome to determine
whether information should be classified as proprietary:
(a) The information reveals details of Framatomes research and development
plans and programs or their results.
(b) Use of the information by a competitor would permit the competitor to
significantly reduce its expenditures, in time or resources, to design, produce,
or market a similar product or service.
(c) The information includes test data or analytical techniques concerning a
process, methodology, or component, the application of which results in a
competitive advantage for Framatome.
(d) The information reveals certain distinguishing aspects of a process,
methodology, or component, the exclusive use of which provides a
competitive advantage for Framatome in product optimization or marketability.
(e) The information is vital to a competitive advantage held by Framatome, would
be helpful to competitors to Framatome, and would likely cause substantial
harm to the competitive position of Framatome.
The information in this Document is considered proprietary for the reasons set forth in
paragraphs 6 (b), (c), (d), and (e) above.
- 7. In accordance with Framatomes policies governing the protection and control
of information, proprietary information contained in this Document has been made available, on
a limited basis, to others outside Framatome only as required and under suitable agreement
providing for nondisclosure and limited use of the information.
- 8. Framatome policy requires that proprietary information be kept in a secured
file or area and distributed on a need-to-know basis.
- 9. The foregoing statements are true and correct to the best of my knowledge,
information, and belief.
I declare under penalty of perjury that the foregoing is true and correct.
Executed on: October 20, 2024
Digitally signed by ELLIOTT ELLIOTT Gayle Gayle Date: 2024.10.20 17:57:02
____________________________________ -04'00' Gayle Elliott
