| 05000395/FIN-2016003-01 | 2016Q3 | H.12 | Failure to Meet HRA Entry Requirements (Two Examples) |
| 05000395/FIN-2016003-02 | 2016Q3 | H.1 | Failure to Prescribe Work Instructions for a Temporary Repair on a Safety-Related Component |
| 05000395/FIN-2016007-02 | 2016Q4 | P.3 | Failure to Correct a Condition Adverse to Quality Associated with a Previously Issued NCV |
| 05000395/FIN-2016010-02 | 2016Q4 | H.2 | Failure to identify unsealed cabinet Specified by NFPA 805 Section 3.3.1.2(1) |
| 05000395/FIN-2016010-03 | 2016Q4 | | Failure to ensure credited equipment to support the 50 54hh requirements were adequate |
| 05000395/FIN-2016010-05 | 2016Q4 | P.3 | Failure to meet corrective action requirements consistent with NFPA 805 Section 2.6.3 |
| 05000395/FIN-2016004-01 | 2016Q4 | H.1 | Failure to Establish Procedures for Corrective Actions to Address Conditions Adverse to Fire Protection |
| 05000395/FIN-2016004-02 | 2016Q4 | P.3 | Failure to Promptly Identify and Correct a Condition Adverse to Quality for B Emergency Diesel Generator Exhaust Manifold Weld Indications |
| 05000395/FIN-2016004-03 | 2016Q4 | H.5 | Failure to Accomplish Procedure for Foreign Material Exclusion Control Involving Failure of a Safety-Related Breaker |
| 05000395/FIN-2016004-04 | 2016Q4 | | Failure to Update FSAR with a New Design Function for the Equipment and Floor Drain System |
| 05000395/FIN-2016007-01 | 2016Q4 | | Failure to Implement Corrective Actions and Restore Compliance for Previous NRCIdentified SLIV NCV |
| 05000395/FIN-2016010-01 | 2016Q4 | | Failure to Meet the Quality Requirements Specified By NFPA 805 |
| 05000395/FIN-2016010-04 | 2016Q4 | | Failure to seek or gain approval for risk-informed changes constituted a self-approved change which is inconsistent with the NFPA 805 requirements |
| 05000395/FIN-2017201-01 | 2017Q1 | | Security |
| 05000395/FIN-2017201-02 | 2017Q1 | | Security |
