ML17172A645
| ML17172A645 | |
| Person / Time | |
|---|---|
| Site: | Purdue University |
| Issue date: | 06/29/2016 |
| From: | Mirion Technologies Corp |
| To: | Office of Nuclear Reactor Regulation |
| Shared Package | |
| ML17172A634 | List: |
| References | |
| Download: ML17172A645 (1) | |
Text
NV 102 NI 11 NH 32.51 NR 31 NB 22 NZ 21.22 NZ 12 test 0...+1kV 1 out of 16 range indicator S
U range information 4 binary inputs NB 21 change rate 2 fixed trip alarms adjustable alarms and status signals operator's
- access, functional monitoring, re-calculation range, test test (NZ12) test 4 bit detector voltage monitoring internal voltage monitoring fault status up/down enable NT 64 I
f decoder 16 relays range 2 key switches NS 01 detector voltage range control change rate RTP 3000 0 to 150% in 16 lin. ranges 110% (
FS) setback 120% (
FS) pow. trip 73.3%
80%
0.1 pA to 1mA 80C32 par-RAM EPROM counter 2
NB 28 relay chg.over relay switches trip alarms uncompensated ion chamber current/frequ.
converter parameter settings DAK 250-g: Purdue Linear Power Channel - Block Diagram 2016-06-29 J
P23 ed.1 reviewed: approved:
DBR P 0000396 Channel 3 Linear Power Power Supply NN43 NN 53 Vs = 115 / 230 VAC 8 relays relay chg. over alarms test failure Relais NS 01 NB 21 not on scale 4 to 20 mA S-BUS lin. power log. power low pass, lin./log.
scaling test (NZ12) 8x DPDT remark:
linear full scale:
FS := 150%"
73.3%FS = 110%
3.3%FS = zero 80%FS = "120%"
" (default)
" (default)
RTP 3000 system fault (to RTP 3000) system test (to RTP 3000) up/down enable Release (Keys) remark:
Due to automatic switching, the not on scale alarm is only relevant for the lowest range 16.
Its expected to switch at approx. 1 pA.
BO1.8 BO1.6 BO1.7 BO1.1 BO2.1 BO2.2 main electronic rack DAK 250-g board control loop channel fault