ML18051A657

From kanterella
Revision as of 21:35, 25 April 2019 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
Jump to navigation Jump to search
Review of Licensee Response to Design Codes,Design Criteria & Loading Combination (SEP,III-7.B),Palisades Plant, Draft Supplementary Technical Evaluation Rept
ML18051A657
Person / Time
Site: Palisades Entergy icon.png
Issue date: 10/10/1983
From: DARWISH M, STILWELL T C, WALLO E W
FRANKLIN INSTITUTE
To: PERSINKO D
NRC
Shared Package
ML18051A656 List:
References
CON-NRC-03-81-130, CON-NRC-3-81-130, TASK-03-07.B, TASK-3-7.B, TASK-RR TAC-48726, TER-C5506-422, TER-C5506-422-DRFT, NUDOCS 8311040120
Download: ML18051A657 (43)
v • d • e


Text

  • (DRAFT) 9 TECHNICAL EVALUATION REPORT SUPPLEMENTARY REPORT REVIEW OF LICENSEE RESPONSE TO DESIGN CODES, DESIGN CRITERIA, AND LOADING COMBINATIONS

<SEP., III-7.B) CONSUMERS POWER COMPANY PALISADES PLANT NRC DOCKET NO. 50-255 NRC TAC NO. 48726 NRC CONTRACT NO.

Prepared by Franklin Resear.:h Cent*' The Parkway at Twentfeth Street Philadelphia, PA 19103 '* Prepared for Nuclear Regulatory Commission Washington, D.C. 20555 FRC PROJECT C5506 FRC ASSIGNMENT 18 FRCTASK 422 Author: T. C .. Stilwell, M. Darwish, E. W. Wallo FRC Group Leader: T. c. Stilwell Lead NRC Engineer:

D. Persinko October 10, 1983 This report was prepared as an account of work sponsored by an agency of the United States Government.

Neither the United States Government nor any agency thereof, or any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for any third party's use, or the results of such use, of any information, ratus, product or process disclosed in this report, or represents that its use by such third party would not infringe privately owned rights.

Research Center A Division of The FrankJin Institute The Beniarmn Franklin P11"'-Y. Phila .. Pa. 19103 (2151448-I000 TER-C5506-422 CONTENTS Section Title l INTRODUCTION 2 DESIGN CODE CHANGES DESIGNATED SCALE A

  • 2.1 Shear Connectors for Composite Beams 2.2 Composite Beams or Girders with Formed Steel Deck
  • 2.3 Flange Stress in Hybrid Girders .. Stresses in Unstiffened Compression Elements l 2 2 2 3 3 2.5 Maximum Load in Riveted or .Bolted Tensile Members* * **
  • 4 2.6 Shear Load in Coped Beams * " 2.7 Column Web Stiffeners at Frame Joints. 2.8 Lateral Support Spacing in Frames *. 2. 9 Brackets and Corbel's 2.10 Special Provision for Walls 2.10.l Shear walls 2.10.2 Punching Shear. * .. 2.11 Elements Loaded in Shear with No Diagonal Tension
  • 2.12 Elements Subject to Temperature Variations.

2.13 Columns with Sp!iced Reintorcing 2.14 Embedments.

2.15 Ductile Response to Impulse Loads

  • 2.16 Tangential Shear (Containments) 2.17 Areas of Containment Shell Subject to Peripheral Shear. 2.18 Areas of Containment Shell Subject to Torsion . 2.19 Thermal Loads . 2.20 Areas of Containment Shell Subject to Biaxial Tension .

Brackets and Corbels (on the Containment Shell) iii 5 6 7 8 8 8 8 9 9 10 10 11 11 12 12 12 13 13 TER-C5506-422 CONTENTS (Cont.) Section Title 3 REVIEW METHOD AND TABULAR PRESENTATIONS.

4 TABULAR

SUMMARY

OF REVIEW FINDINGS OF LICENSEE COMPLIANCE STATUS CONCERNING IMPLEMENTATION OF SEP TOPIC III-7.B IMPACT OF DESIGN CODE CHANGES 5 6 7 8 REVIEW FINDINGS -LOADS AND LOAD COMBINATIONS

5.1 Containment

Structure

  • s.*2 Liner
  • 5.3 Control Room, Diesel Generator, and Switchgear Rooms ' 5.4 Spent Fuel Pool ' 5.5 . Auxiliary Building Roof Over Spent Fuel Pool 5.6 Auxillary B_uilding New Fuel Area, Pilmp Rooms, and Radwaste Treatment Area 5.7 Intake Structure

5.8 Turbine

Building Auxiliary Feedwater Pump Enclosure

SUMMARY

OF REVIEW FINDINGS *

  • CONCLUSIONS AND RECOMMENDATIONS.

REFERENCES

  • 14 17 27 28 29 30 31 32 33 34 35 36 37 38 TER-C5506-422 FOREWORD This Technical Evaluation Report was prepared by Franklin Research Center under a contract with the U.S. Nuclear Regulatory Commission (Office of Nuclear Reactor Regulation, Division of Oper'ating Reactors) for technical assistance in support of NRC operating reactor licensing actions. The technical evaluation was conducted in accordance with criteria established by the NRC. v .. ..

TER-CSS06-422

l. INTRODUCTION Current design criteria for nuclear power plant structures contain requirements that were not in effect when older plants were designed and licensed.

Consequently, one aspect (designated Topic III-7.B) of the implementation of NRC's Systematic Evaluation Program requires licensees to review changes that have occurred in structural design criteria since their plant was built and also to review the loads and load combinations used for

  • design of plant structures by comparing them with the loads and load combinations now specified for current construction.

The licensee's objective is to assess the impact that these changes may have*on margins of safety of Seismic Category I structures as they were originally perceived and as they would be perceived under current criteria.

Upon completion of this work, licensees report their findings to the NRC. l To assist in this reV'l.ew, the NRC provided licensees with plant-specific Technical Evaluation Reports (TERs) concerning these issues (e.g., Reference . \. 1). The TERs listed design code'changes and, one building-by-building basis, -the load and loading combination changes to be addressed in the licensee review. The items listed were ones judged to have the g_reatest potential to degrade the originally perceived margins of safety. In May 1983, under contract NRC-03-81-130, the NRC reta.ined the Franklin Research Center (FRC) to assist in its review of licensee findings.

This report describes the review for the Palisades Plant and summarizes Consumers Power Company's compliance status with respect to the implementation of SEP Topic III-7 .B.

TER-C5506-422

2. DESIGN CODE CHANGES DESIGNATED SCALE A Current structural design codes contain provisions that differ from, or did not appear in, the codes to which older plants were designed and structed.

Changes that were judged to have the potential to significantly affect perceived margins of safety changes are discussed item-by-item have been designated as Scale A. i! in this section of the repor,t. j 2.1 SHEAR CONNECTORS FOR COMPOSITE BEAMS These Four major modifications to the 1963 AISC Code [2] related to the type, distribution, and spacing of shear connectors for composite beams occur in the 1980 Code [3]. These modifica.tions are: a. Permission to use.iightweight structural concrete (concrete made with C330 aggregates) in composite designs '

  • b. Allowance of design for composite action in the negative moment region of continuous beams design guidance for including the longitudinal reinforcing steel in the negative moment resisting section c. Design requirements for the minimum number of shear connectors in reg ions of concentrated load ** d. Maximum and minimum spacing requirements in terms of stud diameters.

The first two modifications will not affect old designs because they were not allowed by the previous code. The new provisions concerning the number of studs in the region near concentrated loads and the new limits concerning spacing of studs may adversely affect the margin of safety in older designs when checked against the new code provisions.

These new requirements are of special concern in the case of composite beams subject to large concentrated loads, such as those associated with extreme environmental or critical accident conditions.

2;2 COMPOSITE BEAMS OR GIRDERS WITH FORMED STEEL DECK The 1980 AISC Code [3] contains a new section covering stay-in-place formed steel deck used in a composite design. These provisions for TER-C5506-422 formed steel decking, depending on the rib geometry and the direction of the ribs relative to the beam, may affect the load capacity of the shear studs and the effective flange width of the assumed concrete compression flange. They provide for reduction factors, to be applied to the shear stud allowable capacity, which account for the structural irregularity introduced into the composite slab. Composite beams with formed steel decks that were designed to the previous code could have less conservative margins of safety when compared to present requirements, especially in cases where extreme loadings are to be considered.

2.3 FLANGE

STRESS IN HYBRID GIRDERS The AISC Code section covering reduction of bending stress in the \ \ compression flange was mocUfied in the 1980 Code. The original flange stress formula in the old code was needed to account for stress transfer which may occur i'!"ordinary beam webs if the compression region should deflect laterally, thereby changing the bending capacity of the cross section. In hybrid girders, the amount of the loss of bending resistance resulting from this phenomenon will vary depending on the relative properties of the web and flange steel. A reduced bending stress formula reflecting this interaction was introduced.

In order to keep the formulation relatively simple, the reduced bending stress was made applicable to both flanges of the hybrid member. Beams or girders fabricated from plate and in which the flange and web steels are different could have lower margins of safety under the new code than were thought to exist under older requirements, in particular when the ratio of web yield stress to flange yield stress is less than 0.45 and the ratio of the web area to flange area is low. 2.4 STRESSES IN UNSTIFFENED COMPRESSION ELEMENTS New requirements provide stress reduction factors for unstiffened elements subject to compression with one edge, parallel to the compressive stress, free. ..

--TER-C5506-422 Previous code provisions allowed the designer to neglect a portion of the area of such elements.

The new code requirements provide equations for ious elements based on the critical buckling stress for plates. The new analytical approach is more conservative for the stems of tees and less conservative for all other cases. Where structural tees are used as main members and the tee stem is in compression, the margin of safety for older designs checked under the new code could be significantly less than was thought under prior code requirements.

Since buckling is a non-ductile type failure, these new requirements are of special concern in the case of tee shapes subjected to the extreme mental or critical accident conditions.

2.5 MAXIMUM

LOAD IN RIVETED OR BOLTED TENSILE MEMBERS The 1980 AISC Code [3],introduces codes changes which affect the maximum load permitted in tensile members: Two interacting code changes-are involved in establishing this limit, and the mutual effects of both must be considered in*assessing the impact of the new code upon the perception of margins of safety in tension members. The two provisions involved concern: . l. the tensile area permitted to be used in establishing load carrying capacities

2. the allowable stresses to be used in conjunction with these areas. Both effects are taken into account in ranking this change. The potential magnitude of the mutual effects of the two changes is discussed below. The 1980 AISC Specification definition of *Effective Net Area* introduces a reduction coefficient which is to be applied to the traditional definition of net area. This essentially changes the design capacity of a te_nsion member when compared to older versions of these specifications.

First, consider only the effect of the critical area used for the design of a tension member as defined in the new code compared to the critical area used for the design of the same member as defined in the old code. Clearly, if all other factors are TER-CSS06-422 equal, the new code is more conservative.

However, all other factors are not the same. The changes in allowable tensile stress definition (on the gross area and on the effective net area) that were introduced simultaneously with the new definition of effective net area modify the above conclusion.

In addition, the traditional upper limit on the critical net area of 85% of the gross area (a requirement of the old code) is no longer a requirement of the new code. Both of these changes interact with the new effective net area requirement.

A valid assessment of the effect of these changes is best accomplished by a comparison of the allowable load each code permits in tension members. If one considers the allowable load on the effective net area, the value based on the new code is a function of three variables:

the new reduction coefficient, the net area,* and the ultimate tensile strength of the steel. The load based on the old code i>B a function of only two variables:

the net area and the* yield strength of steel. First, form the load ratio of the allowable load defined by the new,.code criteria to the allowable load defined '* by the old code criteria.

This* ratio is the prodtict of the ratio of the net .. . areas, the new code net area reduction factor, and the .r.atio of the steel ultimate strength to the yield strength.

Next, consider the ranges of all of the parameters mentioned these establish upper and lower limits for the ratio. For all steels al.lowed under the new code, th.is load ratio ranges from 1.5 to 0.69. For all steels allowed under the old code, this load ratio . ranges from 1.6 to 0.88. It is apparent that, for those steels with load ratios less than l.O, the new code is more conservative than the old. The margin of safety of some older designs therefore could. be significantly lower when checked against the new code requirements.

2.6 SHEAR

LOAD IN*COPED BEAMS The 1980 AISC Code [3] introduces additional control over the shear load permitted at beam end connections where the top flange has been coped. *.In making this comparison, one must be careful to note that the net area is not always the same under the old and new codes. .ResearQ\

,. -*

  • TER-C5506-422 Web shear control in older codes did not distinguish between coped and uncoped beams or between shear allowed at connections and over the free span (except for requiring reinforcement of thin webs at connections).

The shear load allowed was given by: allowable shear load = 0.4 (yield strength) (gross web section).

The 1980 Code retains this limit, but introduces an additional requirement to protect against a failure mode associated with coped beams. For coped beams (and similar situations), a portion of the web may sever, faii'ing along the perimeter of the connection holes. In particular, coped beam web connections where the fastener holes lie close to the butt end of the beam may be prone to such failures.

This web ntear out" fa\lure is actually a combination of. shear failure through the line of fasteners together with tensile failure across the ' shortest path to the beam The failure surface turns a corner with shear '* failure along a line trending upward through the jloles, combined with tensile failure across a hot-izontal line running out to the beam end. The newly introduced shear limit is given as a function of the minimum net failure surface and the steel ultimate strength.

Thus, the new requirements may or may not control a coped beam's allowable capacity in shear *. Whether or not it does depends on both the connection geometry and the type of steel used. When this requirement.is controlling, coped beams designed by previous rules may be found, if checked against the new criteria, to have significantly smaller margins of safety than previously thought. 2.7 COLUMN WEB STIFFENERS AT FRAME JOINTS The more recent editions of the AISC code mandate which columns must be stiffened at locations where beams of girders are rigidly attached to the column flange and also establish requirements for the geometry of such web stiffeners.

These requirements are introduced to preclude local crippling at such frame joints.

TER-CSS06-422 No such guidance was provided by AISC-63 [2]. Older codes (such as AISC-63) left such matters to the designer's discretion.

Consequently, there is no assurance that all such columns are adequately stiffened for accident and faulted loadings.

2.8 LATERAL

SUPPORT SPACING IN FRAMES (PLASTIC DESIGN METHOD) The 1980 AISC Cod' contains changed spacing requirements for lateral supports in members in frames where failure mechanisms are expected to form at ultimate load. Members of such frames must not only be capable of developing a plastic hinge, but must also be stable enough to sustain moments larger than those computed on an elastic-perfect-plastic.theory (because real steels work-harden at strains to occur at hinge locations).

Previous lateral bracing requirements were developed' for a limited range of steels. Research on i high-strength:

steels has shown that, for certain ranges of slenderness.

rat1o of the compression flange of suc1i' frame members, older specification bracing requirements were not sufficiently conservative.

-The new specification requirements make the slenderness ratio limits a function of the steel rield strength and the member curvature (as expressed the ratio of the lesser bending moment at the ends of the unbraced segment to* the plastic moment). The new specifications are more conservative for (l) any segment bent in double curvature regardless of its steel specification and (2) very high-strength steel members. The adequacy of frame members bent in single curvature and constructed of steels whose yield strength exceeds 36 ksi should be examined on a case-by-case basis. The new requirements may reduce the margins of safety thought to exist in: 1. structures designed under the plastic requirements of older codes 2. elastically designed structures sized .to carry a smaller maximum load than is now required by current accident and faulted load combinations.

In this case, plastic logic may have to be invoked to justity the adequacy of exisiting structures.

Noncontormance with TER-C5506-422 current bracing requirements may substantially restrict the capability of frame members to carry code-acceptable overloads.

2.9 BRACKETS

AND CORBELS ACI 349-76 [4], Section ll.13 contains design requirements for short brackets and corbels which are considered primary load-carrying members: no comparable requirements are provided in ACI 318-63 [5]. The requirements apply to brackets and corbels having a shear depth ratio of unity or less. They provide minimum and maximum limits on tension and shear reinforcement, limits on ultimate shear stress in concrete, and constraints on member geometry and location of reinforcement.

Brackets and corbels designed under earlier codes may or may not satisfy the newly imposed limits. .If they do not, they may be prone to non-ductile 1 failure (which occurs suddenly and without warning) and may exhibit smaller margins of safety than those required.

2.10 *. SPECIAL PROVISIONS FOR WALLS 2.10.1 Shear Walls ACI 349-76, Sections ll.15.l through ll.15.6 specify requirements for reinforcing and permissible shear stresses for in-plane shear loads on walls. The ACI 318-63 Code had no specific requirements for in-plane shear on shear walls. 2.10.2 Punching Shear ACI 349-76, Section ll.15.7 specifies permissible punching shear stresses for walls. ACI 318-63 had no specific for walls for these stresses.

Punching loads are caused by relatively concentrated lateral loads on the walls. These loads may be from pipe supports, equipment supports, duct supports, conduit supports, or any other component producing a lateral load on a wall.

TER-C5506-422 2.11 ELEMENTS LOADED IN SHEAR WITH NO DIAGONAL TENSION (SHEAR FRICTION)

The provisions for shear friction given in ACI 349-76 did not exist in ACI 318-63. These provisions specify reinforcing and stress requirements for situations where it is inappropriate to consider shear as a measure of diagonal tension. 2.12 ELEMENTS SUBJECT TO TEMPERATURE VARIATIONS . ' The ACI 349.:.76i, Appendix A requirements for thermal considerations in nuclear safety-related, reinforced concrete structures do not have a comparable counterpart in AC! 318-63. The new provisions give guidance in the form of general design ments and limiting concrete temperatures.

New design provisions requires that .

  • i .* the effects of temperature gradients and the effects of the difference between ' . mean temperature and base during normal operation or accident conditions be considered.

Also, thermal stresses are to be evaluated

... considering the stiffness and rigidity of the degree of restraint of the structure.

Concrete temperature limits are specified, both for normal operation or other long-term periods and for accident or other short-term periods. In addition, special temperature limits are provided for localized conditions such as **around penetrations and from steam or water jets that might strike concrete structures as a result of postulated pipe breaks. All requirements of the older codes are a result of experience and research with reinforced concrete at temperatures primarily related to normal weather conditions.

Consequently, the older codes did not reflect major effects of high-temperature exposures.

Research into the effects of temperature on mechanical properties of concrete reveals that generally both strength and stiffness degrade significantly with high temperature beginning at about 120° to 150°F. Both properties are reduced as a result of a combination of mechanisms.

Above. these temperatures, microcracking (which results from differential expansion ot aggregate and the cement paste matrix) and paste dehydration are significant contributors to loss of strength and stiffness.

TER-CS506-422 The new requirements may reduce the margins of safety previously thought to exist in older designs if the specified general design requirements were not given appropriate consideration or if current temperature.

limits are exceeded.

In addition, the new code provides specific guidance for thermal stress analysis in cases where thermal gradients exist and defines (in the commentary to Appendix A) three acceptable approaches to the analysis.

It is possible that the structural analysis of some plants designed to earlier codes may not have fully taken into account stresses from thermal loadings.

Where this is true, the computed margins of safety may overstate the actual structural integrity.

2.13 COLUMNS WITH SPLICED REINFORCING The ACI 349-76, Sectiort 7.10.3 requirements for columns with spliced 1 reinforcill9 did not exist in the ACI 318-63 Code. The ACI 349-76 Code requires that splices in each face of a column, where the design load stress in the longitudinal bars varies from fy in compression to 1/2 fy in tension, be developed to provide at least'twice the calculated tension in that face of -the column (splices in combination with unspliced bars can provide this if applicable)

  • This code change requires that a minimum of 1/4 of the yield capacity of the bars in each face of the column be developed by both spliced and unspliced bars in that face of the column. 2.14 EMBEDMENTS Appendix B of ACI 349-80 provides rules for the design of steel embedments in concrete1 the design of embedments is not specifically addressed in ACI 318-63. Current requirements of Appendix B are based upon ultimate strength design using factored loads. The anchorage design is controlled by the ultimate strength of the embedment steel. Ductile failure (i.e., steel yields before concrete fails) is postulated.

Under the provisions of ACI 318-63, the design of embedment's was left to the discretion of the designer.

Working stress design methods widely used.

TER-C5506-422 Consequently, it is likely that original embedment designs do not fully conform to current criteria.

Review of such designs to determine the implications with respect to margins of safety is therefore judged a desirable precaution.

2.15 DUCTILE RESPONSE TO IMPULSE LOADS Appendix C to ACI_349-76

[4] contains design rules for structures which may be subjected to impulse or impact no such provisions occur in ACI 318-63 [5]. The rules of Appendix Care intended to foster ductile response (i.e., steel yields prior to concrete failure) of nuclear structures if and when they experience impulse or impact loads. For structures built to codes not containing such provisions, there is no assurance that sufficient design effort was directed toward.proportioning members to provide energy absorbtion capability.

Consequently, such structures might be*prone to non"'."<luctile, sudden failure should they ever postulated accident loadings such as jet impingement, pipe whip, compartment depreS:Surization, or tornado missiles.

2.16 TANGENTIAL SHEAR (CONTAINMENTS)

Paragraph CC-3421.5, Tangential Shear, of Section III, Division 2 of the ASME Boiler and Pressu-re Vessel Code [61. addresses the capacity of reinforced concrete.containments to carry horizontal shear load. It provides acceptable levels of horizontal shear stress that the designer may credit to the concrete.

No specific guidance in this matter exists in ACI 318-63. The provisions associate the allowable concrete stress in horizontal shear with the concrete properties,*

the manner in which lateral loads are imposed on the structure, and the presence of sufficient reinforcement to .assure that the assumed shear capacity of concrete can be developed.

Sufficient diagonal reinforcement (or its demonstrated.

equivalent) is to qe supplied to carry, without excessive strain, shear in excess of that " \ ' '

!; TER-C5506-422 permitted in the concrete.

A major consideration here is the preservation of the structural integrity of the liner. In containments constructed to older codes, such matters were left to the discretion of the designer, who may or may not have provided the horizontal shear capacity at controlled strains that the code currently requires.

2.17 AREAS OF CONTAINMENT SHELL SUBJECT TO PERIPHERAL SHEAR .Concrete containment design is governed by the ASME Boiler and Pressure Vessel Code,Section III, Division 2, 1980 [6]. The provisions for peripheral (punching) shear appear in code Section CC-3421.6.

These provisions are similar to the ACI 318-63 Code [5] provisions for slabs and footings, except that the allowable punching shear stress in CC-3421.6 includes the effect of shell membrane stresses.

For membrane tension,*

the allowable concrete punching.

shear stress in the ASME Code is less than that '* allowed by ACI 318-63. '* 2.18 AREAS OF CONTAINMENT SHELL SUBJECT TO TORSI.ON Concrete containment design is currently governed by the ASME Boiler and Pressure Vessel. Code,Section III, Division 2, 1980. Section CC-3421.7 of the **code contains provisions for the allowable torsional shear stress in the concrete.

Such provisions were not contained in the ACI 318-63 Code. The present allowable torsional shear stress includes the effects of the membrane stresses in the containment shell and is based on a criterion that limits the principal membrane tension stress in the concrete.

2.19 THERMAL LOADS ACI 349-76 Appendix A and ASME B&PV Code,Section III, Div. 2, CC-3440 contains requirements for consideration of variations in concrete that are not contained in ACI 318-63. The new provisions require consideration of the effects of thermal and of the effects depending on the mean temperature distribution TER-CSS06-422 and the base temperature distribution during normal operation or accident conditions.

The new provisions also require that thermal stresses be eval-uated considering the stiffness and rigidity of members and the degree of restraint of the structure.

An assessment is to be made of the analytical methods used to determine thermal stresses as compared to current code-acceptable practices, e.g., those discussed in ACI and the commentary to ACI 349R-80. If the methods used for design produce stress results which are cantly different from those current procedures generate, perceived margins of safety could be affected.

2.20 AREAS OF CONTAINMENT SHELL SUBJECT TO BIAXIAL TENSION Increased tensile lengths are required by Seet.ion CC-3532. l. 2 ., of Reference 6 for reinforcing steel bars terminated in areas of reinforced concrete containment structures which may experience biaxial tension. For . . . biaxial tension loading, bar development

.{including both straight .. embedment lengths and equivalent straight length for standard hooks) are required to be increased by 25% over the standard development lengths required for uniaxial loading. Nominal temperature reinforcement is excluded from these special provisions.

ACI 318-63 had no requirements related to this increase in development length. 2.21 BRACKETS AND CORBELS (ON THE CONTAINMENT SHELL) The ACI 318-63 Code did not specify requirements for brackets and corbels. Provisions for these components are included in the ASME Boiler and Pressure Vessel Code,Section III, Division 2, Section CC-3421.8.

These provisions apply to brackets and corbels having a ratio of unity or less. The provisions specify minimum and maximum limits for tension and shear reinforcing, limits on shear stresses, and constraints on the member geometry and placement of reinforcing within the member.

TER-C5506-422

3. REVIEW METHOD AND TABULAR PRESENTATIONS The relating to SEP Topic III-7.B which was supplied to the NRC by Consumers Power Company and relied upon for this review is contained in the documents:

"! j;, D. J. VanderWalle, Nuclear Licensing Administrator, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, OSNBC

Subject:

Docket 50-255 -License DPR-20, Palisades Plant, SEP Topic III-7.B, *Design Codes, Design Criteria, and Load Combinations*

  • October 8, 1982 2. K. A. Toner, Senior Licensing Engineer, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, USNRC 3. 4.

Subject:

Docket 90-255 -License DPR-20, Palisades Plant, SEP Topic III-7.B,*

  • Design Codes, Design Criteria, and r.Oad Combinations*

-Action Plan and Schedule to Address One Remaining Open Item January 12, 1983 ** K. A. *Toner, .senior Licensing Engineer, Consumers Power Company Letter to D. M. Crutchfield, Chief, Reactor Branch No. 5, USNRC

Subject:

Docket 50-255 License DPR-20, Palisades Plant, SEP Topic III-7.B., *0esign Codes, Design Criteria, and Load Combinations*

-Action Plan and Schedule to Address One Remaining Open Item February 28';. 1983. K. A. Toner, Senior.Licensing Engineer, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, USNRC

Subject:

Docket 50-255, License DPR-20, Palisades Plant, SEP Topic III.7.B, *oesign Codes, Design Criteria, and Load Combinations,*

Evaluation of Steel Embedment September 23, 1983 Before undertaking licensee report reviews, FRC prepared tabular forms to be used as a working tool during the review process and also to document the review work and its findings when the review was completed.

These tables are intended to: l. establish a systematic and comprehensive review procedure

2. standardize, as much as possible, the review. process for all licensees TER-CSS06-422
3. present a relatively compact overview of each licensee's SEP Topic:
  • III-7.B compliance status. Two such forms were prepared, one related to design code changes and the other to the-differences between loads and load combinations used for design and loads and load combinations current today.* The form sheets provide.space to summarize key information reported in licensee responses.

Certain items (such as descriptions of Scale A code changes, conclusions, and comments) frequently are not adaptable .to abbreviated summary. For items, the form sheets refer the reader either to sections of this TER where the matter is developed more fully or to an \ extended note list compiled on separate sheets. The note list, although detached from the main table in order to allow a fuller discussion, accompanies each table and should be regarded as an integral part of it. The form sheet of four major columnar sections which: * . . l. identify each Scale A item \ ' 2. state the action that the licensee took .or the logic that the licensee presented to resolve the item

  • 3. provide an assessment of engineering conclusions that may be reasonably drawn from the evidence provided .. 4. summarize the licensee's compliance status with respect to the item. Items listed on the tables are designed code changes (or itemized load combinations) designated Scale A. This list is drawn directly from TER-C5257-324, the earlier report on this topic [l). Licensees may choose to address potential concerns stemming from Scale A items in two ways: 1. generically, i.e., on an overall basis which resolves the concern for all plant structures collectively, or 2. on a structure-by-structure basis. *'I'tle tables for load and load combinations do not appear in this report; *instead a tormat corresponding more closely to Consumers Power Company's presentation (in Reference
7) is used. **

TER-C5506-422

___ ___ _ : ______ ',l'he sheets_ are cbmpiled i_n a manner matching the licensee's approach, with one form sheet containing generically treated matters and with structure-specific form sheets for each structure-specific matter. Form sheets summarizing the review findings concerning the licensee's compliance status with respect to the implementation of SEP Topic III-7.B aspects related to design code changes follow in Section 4. A discussion of the review findings concerning the licensee's compliance status with respect to load and load combination changes is presented in s*ection s. '* '* .

TER-C5506-422

4. TABULAR OF REVIEW FINDINGS OF LICENSEE COMPLIANCE STATUS CONCERNING IMPLEMENTATION OF SEP TOPIC-III-7.B IMPACT OF DESIGN CODE CHANGES Form sheets summarizing the review findings concerning technical aspects with respect to the implementation of SEP Topic III-7.B as related to design cOde changes follow.

Research Center A OMsion ol The Frenlclln Institute

  • ' '

CODB CHANGB CITBD AS SCALB A IN TER-S257-l2t REFERENCED CODES AND PARAGRAPH CURRENT AJSC 1980 1.11.t 1.11.5 l.10. 6 1.9.l.2 and App. C l .14.2.2 DESIGN AJSC 1963 1.11.t 1.10.6 1.9. l DESCRIPTION OF CODB CllANGB (See Indicated Re(!!;!rt Section) Shear connectors In composite beams 12 .11 Composite beams or CJlrdera with for111ed steel deck (2.21 Hybrid CJlrdera 12.11 Compression elements having width/thickness ratio greater than specified In 1980 Code 12.u Tension members, when load la transmitted by bolts or rivets 12.S) '

SUMMARY

OF LICBNSBB COHPLIANCB STATUS IMPACT OF DBSIGH CODB CllAHGBS LICBNSBB'S ACTION TO RBSOLVB PLANT1 Palisades STRUCTURB1 All eteel structures Sheet 1 of 6 POTBHTIAL CONCERN BVAWATIOH OF LICBNSEB'S ACTIOH LICBHSBB STATUS 18 SUFFICIBHT 18 llBTllOD BVIDBHCB STATUS WITH RBFBRBHCB VALID AND RBPORTBD TO CONCLU&IOHS RBSPBCT TO FURTHER PAGB APPROPIU-JUSTIFY CON-AND COMHBNTS THIS CODB ACTION DOCUMBNT APPROAal ATB? CLU&IONS?

l&EB NOl'B) CHANGB REQUIRED Ref. 7 p. 6 Llceneea aff tr .. there la Yea Yea Code chanCJ* Resolved None !lact. no algnlflcant not appll-C.l.a design * *' cable to Palisade a cc-11 Ref. 1 p. 6 Licensee atatea that Poaalbly Ho. Mora C-2 RAI aant Respond to Sect. design of *teal baaas definitive to Licensee RAI C.l.b when used with ataal dlacuaslon deck* la prlaarlly required controlled by construction load a Raf. 1 p. 6 Licensee af n<\* hybrid Yea Yea Thia code Resolved None &act .* girder* **lat In plant change not C.l.c atructuraa ilppllcabla to Palisades Ref. 7 p. 7 Not clear. Licensee llo No. More c-* RAI sent Respond Sect. statements 1egardlng relevant

  • to Licensee to RAI C.2 this item do not appear dlacuaalon to directly address the needed laaue Ref. 7 p. 2 Licensee made generic Yea Yea For A-16 Resolved None of Cover comparison of Code steel, old Letter provlalona for caaa coda la of A-16 steel at more Pallsadesl conserv-atlve tzj A UI UI 0 0\ I OS:. N N I ...... ID I CODE CHANGE CITED AS SCALE A IN TER-5257-32' REFERENCED CODES AND PARAGRAPH CURRENT AISC 1980 1.5.1.2.2 1.15.5.2 through 1.15.5.4 2.9 DESIGN AISC 1963 2.8 DESCllIPTIOH OF CODE CllAHGB (See Indicated Re£!!:!rt Sectlonl Beam end connec-tlon with top flange coped, if subject to shear (2.61 Column web atlffenera for connections carrying llOlllBnt or restrained member connec-tion (2. 71 Spacing of lateral supports of members designed uaing plaatlc deaign methods (2.8)

SUMMARY

OF LICENSEE COMPLIANCE STATUS IMPACT OF DBSIGH CODE CHANGES PLANTa Palisades STRUCTURE*

All steel structures Sheet 2 of 6 LICBNSBB'S ACTION TO RBSOLVB POTBHTIAL CONCERH BVAWATIOH OF LICENSEE'S ACTION LICENSEE STATUS RBFBRBNCE PAGB DOCUMBH'I'

!!!!!!!!!!...

Ref. 7 p. 7 Sect. c.*.a lief. 7 p. 7 Sect. c.*.b Ref. 7 p. 8 Sect. 5 18 llBTllOD IS SUPl'ICIBN'l' BVIDBHCB VALID AHD RBPORTED TO APPROPRJ-.JUSTIFY CON-APPROACH Licensee apeculatee thata *. .. l. Conetructlon loads MY control deeign.', 2. Bolting MY coritrol deeign J. Nebe MY have adequate shear area Licensee affir** that restrained

  • ember connec-tione are used nowhere (except for pipe-whip reetralnte)

,, Licensee aff lr .. that all steel etructural members were designed to function elastically ATB? CWSIOllS?

--Yee. Any of these eratlona ere valid, U true Yea Yea Ho. More definite evidence required Yea Yea STATUS WITH CONCWSIONS RBSPBCT TO AND COMHBNTS THIS CODE (SBE Hal'EI CHANGE C-6 C-7 C-8 llAI sent Licensee Resolved Reaolved for all load Inga where react Iona remain elastic at beam supports FURTH BR ACTION RF.QUIRED' Reapond to RAI Hone Ho action required unless plastic logic la subsequently used to justify the Integrity of the exlating structures under Scale A loading com-'. binatlona.

If ao, Licensee's stated clusion must be reexamined.

CODE CHANGB CITBD AS SCALB A IN TBR-52S7-l2t REFERENCED CODES AND PARAGRAPH SUHHARY OP LICBNSBB COllPLIAHCB STATUS IMPACT or DBSIGN*cooa CIL\NGBS PLAHT1 Palisades STRUCTURB1 All.concrete structures Sheet l of 6 LICBNSBB'S ACTION TO RBSOLVB POl'BNTIAL COHCBRN BVAWATIOH or LICBNSBB'S ACTION LICBHSBB STATUS IS SUPFICIBHT CURRENT DESIGN DBSCRIPTION or CODB CHANGB (See Indicated Repo[t Section) PAGB DOCUMBN'l'

!!!!!!!!!._

APPllOACll IS llBTllOD VALID AND BVIDBNCB RBPORTBD TO JUSTIFY CWSIONS? STATUS WITH COHCWSIONS RBSPBCT TO AND COMMBHTS THIS CODB (SBB HOl'BI CHAHGB PURTllBR ACT I OH REQUIRED ACJ 349-76 ACI 318-63 11. ll 11.16.l th[ough 11.16.6 11.16. 1 11.15 Short brackets and corbels (not on the ment shall) (2.9) Ref. 1 Shear valls used Ref. 1 as pr h1ary load-carry lng members (2.10. l) PUnchlng shear stress for valla (2.10.2) Structural elements loaded in shear vhera it la priate to sider shear as a measure of onal tension (shear fr lctlonl (2.111 Refs. 1 and 8 p. 8 Sect. C-6 p. 8 Sect. c-1 p. 8 Sect. C-8 (of Ref. 71 Cover Letter (Of Ref. 81 Licensee polnta 09t that the allowable or l'glnal .' daalgn la 110ra conservative than present allowable Resolved under aeparate SBP Topic Not directly :ddreaditd Licensee response 11111Pllea there are no elgnlf lcant

  • applications at Pai'laadaa Possibly No.

neglects nevly introduced control* on reinforce-ment Possibly Poaalbly *. ,. . It la not clear froa response whether or not all tions vars considered BAI sent to Licensee Resolved RAI sent to Licensee via RAI Respond to RAI Nona Respond to RAI Respond to RAI I N ..... I SlaOIARY OP LICBHSBB COMPLIAHCB BTA'ftJS IMPACT OP DESIGN CODB CHAHGBS PLAHT1 Palisades STRUCTURE1 All concrete structures Sheet 4 of 6 CODB CHANGB CITED AS SCALB A IN TER-5257-324 LICEHSBB'S ACTION TO RBSOLVB POTBHTIAL COHCBRN BVAWATIOH OP LICBHSBB'S ACTION LICENSEE STATUS REFERENCED CODES AND PARAGRAPH CURRENT DBSIGH ACI 349-76 ACI 318-63 Appendix A 7.10.3 805 Appendix e Appendix C DESCRIPl'IOH OP CODB CHANGB (See Indicated Report Section) RBPBRBHCB PAGB DOCUMBHT .!!!!!!!!._

Concrete regions Ref. 7 subject to temperature dependent and position-depen-dent temperature variations (2.121 Column with Ref. 7 spliced rein-forcement subject to stress rever-sal (2.13) Steel embedment Refs. 9 used to transmit and 10 load to concrete (2.14) Elements subject to impluaive and impactive loads, whose failure must be precluded (2.15) p. 8 Sect. C-9 p. 8 Sect. C-10 APPllOACB Jlt,;.MBTHOD VALrf> AND . ATB'l IS SUl'PICIBHT BVIDBHCB RBPORTBD TO .JUSTIFY CON-CWSIOHS'l STATUS WITH COHCLUSIOHS RESPECT TO AND CCllMBHTS THIS CODB (BBB HOTBI CHANGB Licen*** statea no cant aourcsa of ther1111l load exist Possibly Ho. Quantl-C-12 tative infor11ation needed to RAJ sent to Licensee Licensee affir*s no colwan Yea member* in buildings experience stre1ra reversal*

aupport Licensee atatement Yea Cll Resolved FURTHER ACT I OH REQUIRED Respond to RA*I Hone Licensee supplied plan for review procedure (Ref. 9) and an evaluation

10) Reference 10 la under current review Response to this 9oncern la relegated to dlacusslon under loads and load combinations To be mined per findings of SBP Topic 111-5.B A U'I U'I 0 O'I I OS. N N
  • CODE CHANGE CITED AS SCALB A JN TER-5257-l2t REFERENCED CODES DESCRIPTION OF AND PARAGRAPH CODB CllANGB (See Indicated CURRENT / DESIGN Report Section! ASKE B*PV ACJ 318-63 Code Section III Dlv 2, 1980 CC-3421. 5 Containment transmitting in-plane shear (2.16) SUHHARY OF LICENSBE COMPLIANCE STA'IUS IMPACT OF DESIGN CODE CllANGBS PLANT* Palisades STRUCTURB1 Containment Sheet s* of 6 LICBNSBB'S ACTION TO RBSOLVE l'Ol'ENTIAL COHCERH BVAWATIOH OF LICENSEE'S ACTIOH LICENSEE STATUS RBFBRBNCE PAGE DOCUMENT fil!!!!!L Ref. 7 p. 8 C-11 APPROACH *' Liceneee points out this itea found insignificant per lfURBG/CR-158C IS NBTllOD VALID AND AfPROPRI-
  • ' 18 SOFFICIBlft EVIDENCE RBPORTBD TO JUSTIFY COlil-CLUSIONS?

STATUS WITH CONCµJSIONS RBSPBCT TO AND. CCIMMBNTS THIS CODE (SEE NOrB) CHANGE Resolved FURTHER ACTION Rl!QUIRED None CC-3421.6 1707 Region of the Ref. 7 p. 9 Sect. c-u Not clear. Llcsnses does not clearly state h0w *

  • punching shear was evaluated C-17 RAI sent to Licensee Respond to RAI CC-3421. 7 921 CC-3440 (bl, (cl containment shell subject to peripheral shear (2.171 Region of con-tainment shell subject to torsion (2.18) Elements subject to transient thermal loading (2.19) Ref. 7 p. 9 Sect. C-ll Ref. 7 p. 8 Sect. C-9 Licensee states that no shell regions (except at penetrations) ace subject to torsion. Additional reinforcement le placed at these Licensee states no slgnl-ficant sources for significant thermal loads exist Yea Yea. Possibly No.
  • Quantitative lnforaation needed to qualify comment* C-1!1 Resolved RAI sent to Licensee None \, \, ,. Respond to RAI SllOIARlf OP LICBHSBB COMPLIAHCB STATUS
  • IMPACT OP DBSIGll CODB CllAHGBS PLAllT1 Palisades 8TRUCTURB1 Containment Sheet 6 of 6 CODE CHANGE CITED AS SCALB A IH TER-5257-322 LICBNSBB'S ACTION TO llBSOLVB POl'BHTIAL CONCBRN ** J!VAWATION OP LICBHSBB'S ACTION LICBNSBB STATUS REFERENCED CODES ANO PARAGRAPH CURRENT DESIGN ASHE B*PV ACI 318-63 III I Div 2, 1980 CC-3532. l.2 CC-34

21.8 DESCRIPTION

OP CODB CllANGB RBFBRBNCB CSee JncUcated PAGB Report Section)*

DOCllMBN'l' NllMBBR Areas of contain-Ref. 7 ment shell sub-ject to biaxial tenalon 12.201 Brackets and Ref. 7 corbels In con-ta lnment shell 12.211 p. !I lte* c-u p. 10 lte* C-15 J APPROAal :*

  • IS SUPPICIBNT IS llBTHOD BVIDBNCB STATUS WITH VALID AND llBPORTBD TO CONCWSIONS RBSPBCT TO APPROPRI-JUSTlrlf COH-AND COMMBNTS TRIS COOB ATB? CWSIOHS? ISBB NOTBI CHANGB Licensee point* out that Yea Yea Code change Resolved not appli-containment
  • 1e preatreaaed Ltcen*** conaoltdatea dlscusalon wtth that of corbel* tn structure*

external to containment.

Justification of ability under current criteria relies on 110re stringent shear stress ll*lt than currently requtud cable to. Palisades containment Perhaps llo.

c-21 flcatlon dOea not consider current require-ments upon reinforce-ment RAJ sent to Licensee PURTHBR ACTION RF.QUIRED None Reapond to RAI A lJ1 lJ1 0 OI I .... N N TER-CSS06-422 NOTES: In the following notes, the Licensee's conclusion is presented first, followed by the reviewer's comments, if any, in brackets.

C-1. There were no composite structures in the Palisades Plant designed to the 1963 AISC code. Partial composite design was employed for the baler room roof to account for uplift pressure generated by the tornado, in accordance with the 1971 code. Currently, a new addition is being built above the baler room, which will become an interior structure.

[Acceptable J c-2. The main purposes for the combined use of steel beams and steel deck at the Palisades Plant were to facilitate construction and to eliminate the need for additional formworks.

Structural steel beams were primarily designed to support the construction loads, except those addressed in the preceding Section C.l. [Additional information requested]

' C-4. In the 1963 edition of,the AISC specification appendix, Section 1.9 the limiting width-thickness ratios (b/t) for different structural shapes. Th'ose limiting r'atios', which are the lower bound ratios stipulated in Appendix C l;)f AISC 1980 edition, are easy to follow and require no reduction in stress. Provisions were made in the 1963 code to allow for higher b/t, provided that special design consideration was imposed. However, it has not been the common industrial design practice to compensate for possible small material savings by using a more sophisticated design procedure.

Furthermore, structural shapes addressed under Subsection 1.9.l.2 of the AISC code had not been used as the primary load supporting members in the Palisades Plant. Therefore, the safety margin of the Plant structures has not been affected.

[Additional information requested]

C-6. Review of design documents indicates that both welded and bolted connections were used. Furthermore, structural steel beams were primarily designed to carry construction loads rather than being designed as major load carrying members. It was also found that the 1963 code gives more conservative connection strength using ASTM 307 bolts. However, with ASTM 325 bolts, as used at the Palisades Plant, only a few lighter weight wide flange beams for each size may not be conservative.

In common design practice for beam selection, the limitation.on lateral unsupported length tends to direct the designer to avoid lateral weakness by choosing a slightly heavier beam, which would normally possess more than TER-C5506-422 adequate web thickness for the compatible connet:tion.

Therefore, the safety margin of the Plant structures has not been affected.

[Additional information requested]

C-7. The restrained member connections were used only for pipe whip restraints in the Palisades Plant. The review of pipe supports/restraints is outside the scope of this SEP topic. [Acceptable)

-: -:

c-a. All structural*steel members were designed to function elastically in the Plant. The provision of AISC Manual, Subsection 2.9, does not apply. [Acceptable 1 C-9. Short Brackets and Corbels The allowable shear stress, 2t .. l. 7 was used in '* the original which is more conservative than the limiting allowable obtained equation 11.23 of ACI 349m76, Section 11.13.2, for f'clfy a 0.075, a/d = l and Nu/Vu* 0.2 (Nu is usually negligible).

Therefore the provision stated in Section .i1.!3.2 is automatically.net.

[Additional information requested]

C-11. At the Palisades Plant, there are limited structural that are subjected to direct shear. A sample evaluation of such a bracket to ACI 39-80, Section 11.7, shows that there is adequate reinforcement.

[Additional information requested)

C-12. The only high-temperature sources are high-temperature p1p1ng and possible pipe breaks. There is no high-temperature piping embedded inside the concrete structure.

Exposed high-energy lines are insulated.

During a pipe break event, localized high temperature dissipates within seconds. Other temperature variations within the Plant do not warrant concern over structural integrity.

Therefore, this item does not apply. [Additional information requested]

C-13. No columns are subject to stress reversal at the Palisades Plant. The pro'1ision stated in Section 7.10.3 of AC! 349-76 does not apply. [Acceptable] Research Center A.Rr ,.._a ,_,., r:

., 9 ir \' J I ,l TER-CS506-422 C-17. The only shell structure at the Palisades Plant is prestressed concrete containment.

The applicable section of ACI 318-63 for shear is Section 2610 of Chapter 26, not Section 1707 of Chapter 17, which was cited in Appendis B of the Palisades FSAR. Due to the presence of prestressing force, the entire concrete containment shell is under compression, except at the junction of the shell and the basemat under certain loading combinations (FSAR Table 5-1). The provision stated in ACI 318-63, concerning ultimate shear is This value is less than the lower bound figure stipulated in CC-3421.6, ASME Code,Section III, Division 2 (4 because fm fh in compression at all times. This criterion is applicable only to nonprestressed concrete structures. (Additional information requested]

C-18. No torsional moments exist in the region of the containment shell, except at major penetrations.

However, torsion at major peneuations is .al.so insiginficant in comparison with other primary. loads. Furthermore, additional shear reinforcements have been placed around tpe penetrations.

Therefore, the consideration of torsion will not adversely impact the integrity of the containment structure.

'* (Acceptable]

C-21. (Refer to C-9) **

TER-C5506-422 S. REVIEW FINDINGS -LOADS AND LOAD COMBINATIONS An important aspect of current criteria is the loading combinations for which Seismic Category I structures must be designed.

One objective of TER-C5257-324

[Reference 11 was to assemble technical information to assist the NRC in making safety evaluations concerning the structural integrity of Palisades Seismic category I plant structures, based on a comparison of loading combinations actually used for design with the loading combinations currently required.

Section 10.4 of TER-C5257-324 provides tables, Qne for each Seismic category I structure, which are intended to give an overview*of this comparison as it relates to Palisades.

The tables shows: 1. The generalized loading combinations currently specified (in NRC's Standard Review Pltlfl) as appropriate for the structure.

2. The appropriate structure-specific loading combinations.

These are obtained from the generai1zed 2oading combinations by striking off loads believed to be inapplicable or negligible

  • .. .. 3. The loading combinations actually used for design. These were obtained from the FSAR or other relevant documentation made available to the reviewers.

Loads actually combined are indicated by encircling (in the appropriate load combinations) each load used in the summation considered for design. Licensees were requested to review these tables to ensure their accuracy.

Disparities between the load combinations actually used for design and those currently specified are readily apparent on these tables. If the load combinations used were in complete accord with present criteria, each load symbol in the table would appear as either struck or encircled.

Load combinations not considered and loads omitted from the loading combinations stand out as unencircled items. When discrepancies were found to exist, a limited number of loading combinations (usually two) were designated Scale A

  • Licensees were asked x to-. review Scale Ax loading combinations and provide documented evidence of s'tructural adequacy under these loading combinations as currently specified.

Research Center

.,

TER-CSS06-422 The following sections present, on a structure-by-structure basis, the review findings concerning the Licensee's compliance s_tatu_f:l with respect to the load and load combination aspects of SEP Topic III-7.B. 5. l CONTAINMENT STRUCTURE s.1.1 Load Combinations i . I Based on the information provided by Consumers Power Company [7) and information 4eveloped in Topic III-5.A, the followincj sets of loads appear to be proper buildi119-specific loadi_D9 combinations for concrete containment under current criteria.

1. D + L + F + To + Ro 2. D + L + F + To + Eo + Ro 3. D +L+F+To+W'+Ro
4. D + l.JL + F +To*+ l.5Eo +Ro ' 5. D + l.JL + F + To.+ l.SW + Ro 6. D + L + F + To + Ess + RQ . 7. D + L + F + .To+ Wt +Ro a. D + L + F + l.SPa + Ta +-Ra 9. D + L + F + Pa + Ta + l.25Ra 10. D + L + F + l.25Pa + Ta + l.25Eo + Ra 11. D + L + F + l.25Pa + Ta + l.2SW + Ra 12. D + L + F + Ba + To + E .; 13. D + L + F + Ba + To + w 14. D + L + F i<-Pa + Ta + Ess + Ra + Rrr + Rrj Load Combinations 8 and 14 are cited in TER-C5257-324 as Scale A
  • x 5.1.2 Licensee's Evaluation Load Combination 8 <Ra> The specific design details for loading component Ra cannot be located in the original design calculation.

However, Ra is only a localized point loading. Consideration of Ra will not infringe upon the structural integr.ity of the containment structure because sufficient margin exists from considering the other critical uniform load (l.SPa>* Furthermore, the containment was designed with adequate heat sink in addition to the spray system to control-the thermal load during accident conditions.

Load Ra is not expected to be significant.

TER-CSS06-422 Load Combination 14 [Ra + Rr (Yr, Y j, Ym> 1 Inside the containment structure, pipe restraints have been provided at all major pipe break locations to mitigate the pipe break effects. The impact from Ra + Rr is deemed insignificant.

In addition, Load Combination 14 is less critical than Load Combination

10. S.l.2 Review Comments The Licensee's comments concerning Load Combination 8 may well be valid, but no assessment can be made without more specific information..

This mation should describe the Licensee's investigative approach and its findings in a quantitative fashion. retained.

Pending this, the Scale A rating should be x . It is understood that SEP Topic III-5.A found that pipe breaks inside* containment can affect the liner and containment penetrations,, and .. that Consumers Power Company bas made structural analyses investigating these effects and bas submitted them to the NRC. These analyses were not made "* . "* available for the present review. The status of .Load Combination 13 should be. -made in conformance with such a review. 5.2 LINER 5.2.l Load Combinations Based on the information provided by Consumers Power Company [7) and information developed in Topic III-5.A, the sets of loads appear to be proper structure-specific loadi119 combinations for the containment liner. l. D + L + F + To + Ro 2. D + L + F + To + Eo + Ro 3. D + L + F + To + w + Ro 4. D + L + F + To + Eo + Ro 5. D + L + F + To + w + Ro 6. D + L + F + To + Ess + Ro 7. D + L + F + To + Wt + Ro 8. D + L + F + Pa + Ta + Ra 9. D + L + F + Pa + Ta + Ra 10. D + L + F + Pa + Ta + Eo + Ra ll. D + L + F + Pa + Ta + w + Ra 12. D + L + F + Ha + To + Eo TER-C5506-422

13. D + L + F + Ba + To + w* 14. D + L + F + Pa + Ta + Ess + Ra + Rrr +-Rr-j-*-----
      • -* Load Combinations 8 and 14 are cited in TER-C5257-324 as Scale A
  • x S.l.2 Licensee's Evaluation Other than achieving strain compatibility with concrete containment, there is no load transferred to the containment liner. Therefore, the structural intE!9rity of the liner plate is ensured if the structural intE!9rity of the.concrete containment is maintained.

S.2.3 Review Comments 5.3 The comments for the containment structure also apply to the liner. CONTROL ROOM, DIESEL GBNERA'l'OR, AND SWI'l'CHGEAR ROOMS 5.3.l . . ' Load Combinations

  • **. Based on the information provided by Power Company (7], the ' following sets of loads appear to be proper building-specific loading .. combinations for concrete portions of this structure under current criteria.

1 *. 1.40 + l.7L 2. 1.40 + l.7L + l.9E 3. 1.40 + l.7L*+ l.7W 4. (0. 75) (l.40 + 1. 7L + 1. 7To + 1. 7Ro) 5. (0. 75) (l.40 + 1. 7L + l.9E + 1. 7To + 1. 7Ro) 6. (0. 75) (l.40 + 1. 7L + 1. 7W + 1. 7To + 1. 7Ro) 7. 1.20 + l.9E a. 1.20 + l.7W D + L + To + Ro + E' 9. 10. 11. 12. 13. D + L + To + Ro + Wt D + L + Ra D + L + Ra + l.25E' D + L + Ra + l.OE' [Note: Ra has been retained in Combinations ll, 12, and 13 since the FSAR indicates that Ro was included in Combinations

  • s, 6, and 9.] Load Combinations 10 and 13 are cited in TER-C5257-324 as Scale A
  • x TER-C5506-422

5.3.2 Licensee's

Evaluation Load Combination 10 is* *1e*ss-cr itical than Load Combination

9. There are no postulated pipe breaks in these areas. Therefore, Load Combination 13 does not apply. 5.3.3 Review Comments The status for Load Combination 10 should be determined in conformance with the findings of SEP Topic III-2 and III-4.A. The Scale A rati119 may be removed from Load Combination
13. x 5.4 SPENT FUEL POOL 5.4.1 Load Combinations

' Based on the information provided by Consumers Power Company [7], the . following sets of loads appear be proper loading combinations for concrete of this structure under current criteria.

l. l.4D + l.7L 2. l.4D + l.7L + l.9E 3. l.4D + l.7L + l.7W 4. (0. 75) (l.4D + l.7L + l.7To + l.7Ro) 5. (0.75) (l.4D + l.7L + l.9E + l.7To + l.7Ro) 6. (0. 75) (l.4D + l.7L +

+ l.7To + 1. 7Ro) 7. l.2D + l.9E 8. l.2D + 1. 7W 9. D + L + To + Ro + E' 10. D + L + To + Ro + Wt 11. D + L + Ta + Ra 12. D + L + Ta + Ra + l.25E' 13. D + L + Ta + Ra + l.OE' Load Combinations 10 and 13 are cited in TER-C5257-324 as Scale A

  • x 5.4.2 Licensee's Evaluation Load Combination 10 The tornado missile load is not the *controlling load case for the concrete portion of the spent fuel pool. This load was reviewed under SEP Topic III-4*.

TER-C5506-422 Load Combination 13 Impulse loads are not applicable to the spent fuel pool. 5.4.3 Review Comments The status for Load Combination 10 should be determined in conformance with the findings of SEP Topic III-4. The Scale Ax ratings may be removed from Load Combination

13. 5.5 AUXILIARY BUILDING ROOF OVER SPENT FUEL POOL 5.5.l Load Combinations Based on the information provided by Consumers Power Company [7), the ' following sets o.f loads appear to be proper building-specific loading combinations for concrete pc>rtions of this structure under current criteria. l. l. 7D + l. 7L 2. l.7D + l.7L + l.7E ' 3. .1. 7D + l.7L + l. 7W . 4. 1.3 (D + L) 5. 1.3 (D + L + E) 6. 1.3 (D + L + W) 7. D + L + E' a. D + L + Wt 9. D + L 10. D + L + l.25E 11. D + L + E' Load Combination 8 is cited in TER-C5257-324 as Scale A
  • x 5.5.2 Licensee's Evaluation The spent fuel pool enclosure was not designed for tornado loads. This structure was reviewed under SEP Topics III-2 and_III-4.A.

5.5.3 Review

Comments The Scale Ax rating for Load Combination 8 is retained based solely on a clear nonconformance with current structural It is to be noted, however, that consequence analyses may prove that this is not a safety concern.

TER-C5506-422

5.6 AUXILIARY

BUILDING NEW FUEL AREA, PUMP ROOMS, AND RADWASTE TREATMENT AREA 5.6.l Load Combinations Based on the information provided by Consumers Power Company [7], the following sets of loads appear to be proper building-specific loading combinations for concrete portions of this structure under current criteria.

l. 2. 3. 4. 5. 6. 7. a. 1.40 + l.7L 1.40 + l.7L + l.9E 1.40 + l.7L + l.7W (0. 75) (1. 40 + 1. 7L + 1. 7To + 1. 7Ro) (0. 75) (l.40 + 1. 7L + l.9E + l. 7To + 1. 7Ro) (0. 75) (l.40 + 1. 7L + 1. 7W + 1. 7To + 1. 7Ro) 1.20 + l.9E 1.20 + l.7W 9. D + L + To + Ro + E' 10. D + L + To + Ro + Wt 11. D + L + Ta + Ra + .l.5Pa 12. D + L + Ta + Ra

+ 1.0 (Yr + Yj + Ym) + l.25E' 13. D + L + Ta + Ra l.OPa + 1.0 (Yr + Yj + Ym) + l.OE' Load Combinations 10 and 13 are cited in TER-C5257-324 as Scale A * '* x 5.6.2 Licensee's Evaluation Load Combination 10 The tornado missile loads do not apply to these areas because they are enclosed by other reinforced concrete structures.

Load Combination 13 There are no pipe breaks postulated in the pump room area. However, in the main steam and main feedwater penetration rooms, pipe restraints have been provided for high-energy lines to mitigate the consequences of pipe .breaks. Safety margins of the Plant structures will not be affected by the code changes. 5.6.3 Review Comments The Scale Ax rating for Load Combination 10 may be removed. The status for Load Combination 13 should be determined in conformance with the findings of SEP Topic III-5.B. ... "

TER-C5506-422 . 5. 7 INTAKE STRUCTURE 5.7.l Load Combinations Based on the information provided by Consumers Power Company (7), the following sets of loads appear to be proper building-specific loading combinations for concrete portions of this structure under current criteria.

l. l.4D + l. 7L 2. l.4D + l.7L + l.9E 3. l.4D + l.7L + l.7W 4. (0. 75) (l. 4D + l. 7L) 5. (0. 75) (l.4D + l.7L + l.9E) 6. (0. 75) (l.4D + l.7L + l.7W) 7. l.2D + l.9B a. l.2D + l.7W 9. D + L + E' 10. D + L + Wt ll. D + L 12. D + L + l.25E' 13. D + L + l.OE' *. Load Combination 10 is cited in TER-C5257-324 as Scale A *
  • x 5.7.2 Licensee's Evaluation The final safety evaluation for severe weather loads contained in SEP Topic II-2.A shows that Palisades design loads used in the original design are adequate.

SEP Topic III-3.B concerns only the flooding condition and bas no bearing on parapet roof loading. In addition, snow loading is not the controlling load case for roof design. Structural integrity under earthquake was tacitly approved under SEP Topic III-6. 5.7.3 Review Comments Additional information relating to design adequacy of plant strucuture roofs under severe weather loads has been requested.

Load Combination 10 relates to structural adequacy under tornado loads, not earthquake1 therefore, the Licensee's response does not seem appropriate and the Scale A rating is retained pending clarification.

x

  • TER-C5506-422

5.8 TURBINE

BUILDING AUXILIARY FEEDWATER PUMP ENCLOSURE 5.8.l Load Combinations Based on the information provided by Consumers Power Company (7), the following set of loads appear to be a proper *building-specific loading combinations for concrete portions of this structure under current criteria.

l. l.4D + l.7L 2. l.4D + l.7L + l.9E !; 3. l.4D + l.7L + l. 7W( 4. (0. 75) (l.4D + l.7L + l. 7Ro) 5. (0. 75) (l.4D + l.7L + l.9E + l.7Ro) 6. (0. 75) (l.4D + l.7L + l.7W + l. 7Ro) 7. l.2D + l.9E 8. l.2D + l.7W 9. D + L + Ro + E' 10. D + L + Ro + Wt 11. D + L + Ra 12. D + L + Ra + l*.25 13. D + L + Ra + 1.0 4 1 . Load combinations 10 and 13 cited in TER-C5257-324 as Scale A
  • x '* 5.8.2 Licensee's Evaluation Load Combination 10 Tornado load was considered in the original design. Load Combination 13 No pipe break was postulated inside the auxiliary feedwater pump room. The load combination is less severe than other load combinations.

5.8.3 Review

Comments The Scale A rating may be removed from Load Combination

10. The x status for Load Combination 13 should be determined in conformance with the findings of SEP* Topic III-5.B.

TER-C5506-422

6.

SUMMARY

OF REVIEW FINDINGS Number of Scale A and Scale Ax Rankings for Unresolved Items for Palisades Seismic Category I Structures Issues Raised by TER-C5257-324 Resolved To be resolved in accordance with findings of SEP Topic III-5.B Remaining Issues Raised by TER-C5257-324 Resolved To be resolved in accordance with findings of other SEP topics Remaining Scale A Code Changes AISC 1963 ACI 318-63 vs. vs. AISC 1980 ACI 349-76 8 ea 5 2 . '* 0 l '* 3 Scale Ax Load Combinations 14 4 6 ACI 318-63 vs. ASME B&PV Sect. III Div. 2 1980 6 4 0 3 a. Appears in TER-C5257-324 as seven items. The current report treats code shear provisions (Section 11.16) as *two separate

c. Consumers Power Company's embedment evaluation is under current review. A consequence analysis of missile penetration of pool roof may reduce this to three items.

TER-CSS06-422

7. CONCLUSIONS AND RECOMMENDATIONS The review of Consumers Power Company's evaluation of potential concerns raised by SEP Topic III-7.B with respect to the Palisades Plant discloses a number of items which cannot at this time be considered resolved.

The largest number of these center on the evaluation of the impact on structural margins of safety due to changes in design code provisions and may be clarified when requested additional information is received from Consumers Power Company. Relatively few issues remain which center on differences between loading combinations as currently specified compared to those actually used for analysis.

Of all the SEP plants, the loading combination criteria used for the Palisades Plant most nearly conform to current requirements.

TER-:CSS06-422

8. REFERENCF.s
1. Franklin Research Center, Technical Evaluation Report Design Codes, Design Criteria, and Loading Combinations (SEP Topic III.7.B) Consumers Power Company, Palisades Nuclear Power Plant Unit 1, TER-CS257-324 July 30, 1982 2. *specification for Design, Fabrication, and Erection of Structural Steel for Buildings,*

Sixth Edition American Institute Steel Construction, Inc. New York, NY 1963 3. *specification for Design, Fabrication, and Erection of Structural Steel for Buildings,*

Eighth Edition American Institute of Steel Construction, Inc. New York, NY 1980 4. *code Requirements fdr Nuclear Safety Related Concrete Structures* (ACI 349-76) -American Concrete Detroit, MI S. *Building Code Requirements for Reinforced Concrete* (ACI 318-63) American Concrete Institute, Detroit, MI 6. ASME Boiler and Pressure Vessel Code,Section III, Division 2 *eode for Concrete Reactor Vessels and Containments*

New York, NY 1980 7. D. J. VanderWalle, Nuclear Licensing Administrator, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, USNRC

Subject:

Docket 50-255, License DPR-20, Palisades Plant, SEP Topic III.7.B, *0esign Codes, Design Criteria, and Load Combinations*

October 8, 1983

  • 8. K. A. Toner, Senior Licensing Engineering, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, UNSRC

Subject:

Docket 50-255, License DPR-20, Palisades Plant, SEP Topic III.7.B, *Design Codes, Design Criteria, and Load Combinations," Action Plan and Schedule to Address One Remaining Open Item January 12, 1983

  • TER-C5506-422
9. K. A. Toner, Senior Licensing Engineering, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, UNSRC

Subject:

Docket 50-255, License DPR-20, Palisades Plant, SEP Topic III.7.B, *oesign Design Criteria, and Load Combinations,*

Action Plan and Schedule to-Address One Remaining Open Item February 28, 1983 10. K. A. Toner, Senior Licensing Engineering, Consumers Power Company Letter to D. M. Crutchfield, Chief, Operating Reactor Branch No. 5, USNRC

Subject:

Docket 50-255, License DPR-20, Palisades Plant, SEP Topic III.7.B, *oesign Codes, Design Criteria, and Load Combinations,*

Evaluation of Steel Embedment September 23, 1983 J,_

Retrieved from "https://kanterella.com/w/index.php?title=ML18051A657&oldid=1509324"