ML15300A214
ML15300A214 | |
Person / Time | |
---|---|
Site: | Palo Verde ![]() |
Issue date: | 10/22/2015 |
From: | Coble M T, Glunt N L Westinghouse, Westinghouse |
To: | Office of Nuclear Reactor Regulation |
Shared Package | |
ML15300A218 | List: |
References | |
102-07125-JJC/DCE, CAW-15-4303 WCAP-18051-NP, Rev. 0 | |
Download: ML15300A214 (108) | |
Text
Enclosure Relief Request 54 Proposed Alternative in Accordance with 10 CFR 50.55a(z)(1)
ATTACHMENT IPalo Verde Nuclear Generating Station Unit 3 Reactor Coolant Pump 2A Suction SafeEnd Instrumentation Nozzle Half-Nozzle Repair Evaluation, WCAP-1 8051-NP,Non-proprietary VersionNotes:* This Attachment provides a non-proprietary version of the document provided inAttachment 2 to this Enclosure.
- An affidavit is appended to the end of this Attachment and applies to the proprietary version of the document provided in Attachment
- 2. The affidavit provides the basesfor withholding the proprietary document from public disclosure, pursuant to 10 CFR2.390.*The redactions noted in this Attachment are annotated to indicate the corresponding bases for withholding the information from public disclosure and correspond to thebases as enumerated in the appended affidavit.
I Westinghouse Non-Proprietary Class 3WCAP- 18051 -NPRevision 0October 2015Palo Verde Nuclear Generating StationUnit 3 Reactor Coolant Pump 2A SuctionSafe End Instrumentation Nozzle Half-Nozzle Repair Evaluation Westinghouse Westinghouse Non-Proprietary Class 3WCAP-18051-NP Revision 0Palo Verde Nuclear Generating Station Unit 3 ReactorCoolant Pump 2A Suction Safe End Instrumentation NozzleHalf-Nozzle Repair Evaluation Matthew T. Coble*Major Reactors Components Design and Analysis
-INathan L. Glunt*Piping Analysis and Fracture Mechanics October 2015Reviewer:
James P. Burke*Major Reactors Components Design and Analysis
-IAnees Udyawar*Piping Analysis and Fracture Mechanics Approved:
Carl J. Gimbrone*,
ManagerMajor Reactors Components Design and Analysis
-IJohn L. McFadden*,
ManagerPiping Analysis and Fracture Mechanics
- Electronically approved records are authenticated in the electronic document management system.Westinghouse Electric Company LLC1000 Westinghouse DriveCranberry
- Township, PA 16066, USA© 2015 Westinghouse Electric Company LLCAll Rights Reserved Westinghouse Non-Proprietary Class 3 iiTABLE OF CONTENTSLIST OF TABLES ............
...........................................................................
ivLIST OF FIGURES.......................................................................................
v1 BACKGROUND AND INTRODUCTION...........................................................
1-12 FINITE ELEMENT MODELING.....................................................................
2-12.1 METHOD DISCUSSION.....................................................................
2-12.2 MESHED MODEL............................................................................
2-12.3 FEM MATERIAL
.............................................................................
2-42.4 THERMAL AND PRESSURE TRANSIENTS
...............................................
2-42.5 BOUNDARY CONDITIONS...............................................................
2-152.5.1 Thermal Boundary Conditions
..................................................
2-152.5.2 Structural Boundary Conditions
...........................
i.....................
2-152.5.3 Mechanical Loads ................................................................
2-202.5.4 Instrumentation Nozzle Inertial Loads..........................................
2-222.6 STRESS PATH LOCATIONS
.....................
i.........................................
2-242.6.1 Fracture Mechanics Evaluation Paths...........................................
2-242.6.2 Section III Evaluation Paths.....................................................
2-262.7 FINITE ELEMENT RESULTS FOR USE IN FRACTURE MECHANICS EVALUATIONS
.............................................................................
2-303 ASME SECTION III EVALUATION.................................................................
3-13.1 ACCEPTANCE CRITERIA..................................................................
3-13.1.l ASME Section III Design Rules ..................................................
3-13.1.2 Section III Evaluation Stress Allowable Values .................................
3-33.1.3 Design Fatigue Curves for Section III Analysis
.................................
3-83.2 STRESS RESULTS..........................................................................
3-103.2.1 Design Condition
.................................................................
3-103.2.2 Normal and Upset Conditions (Levels A and B)...............................
3-113.2.3 Test Conditions
...................................................................
3-113.2.4 Faulted Condition (Level D).....................................................
3-123.2.5 Fatigue Evaluation................................................................
3-133.3 VIBRATION ASSESSMENT...............................................................
3-134 FRACTURE MECHANICS EVALUATION.........................................................
4-14.1 METHODOLOGY............................................................................
4-14.1.1 Fatigue Crack Growth.............................................................
4-24.1.2 Structural Integrity of the RCP Suction Safe End...............................
4-34.1.3 Generation of Stress Intensity Factors............................................
4-94.1.4 Transient Stress Analysis
........................................................
4-124.1.5 Welding Residual Stress Analysis...............................................
4-134.2 FRACTURE MECHANICS EVALUATION RESULTS .................................
4-204.2.1 Fatigue Crack Growth Evaluation...............................................
4-204.2.2 Final Flaw Stability Evaluation
.................................................
4-214.2.3 Corrosion..........................................................................
4-334.3 FRACTURE MECHANICS SUMMARY AND CONCLUSIONS
......................
4-345 LOOSE PARTS EVALUATION.......................................................................
5-16 SUMMARY AND CONCLUSION
...................................................................
6-17 REFERENCES
.........................................................................................
7-1WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 3 iiiAPPENDIX A: ASME STRESS PATH LOCATIONS
....................................................
A-iA.I1 RCP SUCTION NOZZLE SAFE END LIMITING PATHS ...............................
A-I1A.2 REPLACEMENT NOZZLE LIMITING PATHS............................................
A-5A.3 ATTACHMENT WELD LIMITING PATHS ................................................
A-8WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3ivWestinghouse Non-Proprietary Class 3 ivTable 2-1 :Table 2-2:Table 2-3:Table 2-4:Table 2-5:Table 2-6:Table 3-1 :Table 3-2:Table 3-3:Table 3-4:Table 3-5:Table 3-6:Table 3-7:Table 3-8:Table 3-9:Table 4-1 :Table 4-2:Table 4-3:Table 4-4:Table 4-5:Table 4-6:Table 4-7:LIST OF TABLESTransients
............................................................................................
2-4Mechanical Loads on Cold Leg Pipe from [26] ..............
2-21NOp Loads without Deadweight
.................................................................
2-22Pressure Instrumentation Nozzle Mechanical Loads from [27] ................................
2-22Response Spectra at [ Hz...............................................................
2-22Instrumentation Nozzle Inertial Loads...........................................................
2-23Material Strength Properties
.......................................................................
3-4ASME Load Case Combinations...................................................................
3-4Section III Allowable Stresses for RCP Suction Nozzle Safe end, 1974 Code Year [2] ......3-6Section III Allowable Stresses for Replacement Nozzle and Weld, 1998 Code Year [3] .....3-7Design Condition Stress Results..................................................................
3-10Normal and Upset Condition Stress Results.....................................................
3-11Test Condition Stress Results .....................................................................
3-11Faulted Condition Stress Results .................................................................
3-12Fatigue Evaluation Results........................................................................
3-13ASME Section XI, Appendix C Safety Factors...................................................
4-6Fatigue Crack Growth Results....................................................................
4-21Screening Criteria Results for Limiting Transient Time Steps .................................
4-22LEEM Results for Axial Flaw.....................................................................
4-24LEFM Results for Circumferential Flaw ........................................................
4-24EPFM Results for Axial and Circumferential Flaws at 0.1" Crack Extension................
4-26Palo Verde Unit 3 RCP Suction Safe End Primary Stress Limit ...............................
4-32WCAP-l 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3VVLIST OF FIGURESFigure 1-1 : RCP Instrumentation Nozzle Repair Schematic.................................................
1-3Figure 2-1: FEM (Overall Section Cut through X-Y Plane) .................................................
2-2Figure 2-2: FEM (Close-up View of Pressure Instrumentation Region) ....................................
2-3Figure 2-3: Plant Heatup........................................................................................
2-5Figure 2-4: Plant Cooldown
....................................................................................
2-6Figure 2-5: Plant Loading ......................................................................................
2-7Figure 2-6: Plant Unloading
....................................................................................
2-8Figure 2-7: Reactor Trip -Envelope of Reactor Trip, Loss of Flow, and Loss of Load ...................
2-9Figure 2-8: 10% Step Increase................................................................................
2-10Figure 2-9: 10% Step Decrease
...............................................................................
2-11Figure 2-10: Loss of Secondary Pressure (0 to 4,000 Seconds)............................................
2-12Figure 2-11 : Loss of Secondary Pressure (Full Range).....................................................
2-13Figure 2-12: Leak Test.........................................................................................
2-14Figure 2-13: RCS Temperature Surfaces.....................................................................
2-15Figure 2-14: Fixed Boundary Conditions....................................................................
2-17Figure 2-15: Mechanical Load Boundary Conditions.......................................................
2-18Figure 2-16: Pressure Surfaces..................................................................
i.............
2-19Figure 2-17: Safe end Blowoff Pressure
.....................................................................
2-19Figure 2-18: Instrumentation Nozzle Blowoff Load ........................................................
2-20Figure 2-19: Flaw Evaluation Paths ..........................................................................
2-24Figure 2-20: Stress Orientation for Downstream Flaw Evaluation.........................................
2-25Figure 2-21: Typical Paths in RCP Suction Nozzle Safe end...............................................
2-26Figure 2-22: Typical Paths in Attachment Weld Cross-section
.............................................
2-27Figure 2-23: Typical Paths in Nozzle Body Cross-section
.................................................
2-27Figure 2-24: Typical Primary Membrane (Pm) Weld Path Locations.......................................
2-28Figure 2-25: Typical Path Locations in Nozzle Fillet Region ..............................................
2-29Figure 2-26: Typical Path Locations in Outboard End Region of Nozzle .................................
2-29Figure 2-27: Stress Intensity Contour Plot, End of Cooldown
.............................................
2-30Figure 2-28: Stress Intensity Contour Plot, Reactor Trip at Time --62.9 Seconds........................
2-31Figure 2-29: Stress Intensity Contour Plot, Loss of Secondary Pressure at Time = 75 Seconds.........
2-32Figure 3-1: Attachment Weld Design Requirements
[3]1..................................................
3-2Figure 3-2: Socket Weld Design Criteria
[28] ................................................................
3-3Figure 3-3: Design Fatigue Curve for SA-508 Class 1, per Figure I-9.1 [2]................................
3-8Figure 3-4: Design Fatigue Curve for SB-166, per Figure I-9.2.1 and Figure 1-9.2.2 [3] .................
3-9Figure 4-1: Corner Crack Geometry..........................................................................
4-10Figure 4-2: Axial Flaw Geometry
............................................................................
4-10Figure 4-3: Circumferential Flaw Geometry
................................................................
4-I1Figure 4-4: Residual Stress Evaluation Cut Paths [ 13]......................................................
4-15Figure 4-5: Residual Hoop Stress Results (psi) [13] ........................................................
4-16Figure 4-6: Residual Axial Stress Results (psi) [13] ........................................................
4-17Figure 4-7: Through-Wall Welding Residual Hoop Stress Profile [13]....................................
4-18Figure 4-8: Through-Wall Welding Residual Axial Stress Profile [13]....................................
4-19Figure 4-9: EPFM Evaluation Results for Axial Flaw -Step Load Increase Transient...................
4-26Figure 4-10: EPFM Evaluation Results for Axial Flaw -Reactor Trip Transient
.........................
4-27WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 VviFigure 4-11: EPFM Evaluation Results for Axial Flaw -Loss of Secondary Pressure Transient.......4-28 Figure 4-12: EPFM Evaluation Results for Circumferential Flaw -Step Load Increase Transient
.....4-29Figure 4-13: EPFM Evaluation Results for Circumferential Flaw -Reactor Trip Transient
.............
4-30Figure 4-14: EPFM Evaluation Results for Circumferential Flaw -Loss of Secondary PressureTransient.........................................................................................
4-31Figure A-I: Path Location 6 ...................................................................................
A-iFigure A-2: Path Location 1....................................................................................
A-2Figure A-3: von Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 Seconds .................
A-3Figure A-4: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 Seconds............
A-4Figure A-5: Path Location 61 ..................................................................................
A-5Figure A-6: Path Locations 58 and 60 ........................................................................
A-6Figure A-7: von Mises Stresses
-Cooldown Transient at Step 4, Time 10,800 Seconds .................
A-6Figure A-8: von Mises Stresses
-Upset Transient at Step 5, Time 62.89 Seconds ........................
A-7Figure A-9: Path Location 26 ..................................................................................
A-8Figure A-10: Path Location 31.................................................................................
A-9Figure A-Il: Path Location 39.................................................................................
A-9Figure A-12: Path Location 27 ...............................................................................
A-10Figure A-13: Path Location 19 ...............................................................................
A-10Figure A-14: Path Location 35 ...............................................................................
A-IlFigure A-IS: von Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 Seconds with Cutoutat Path 39.......................................................................................
A-12Figure A-16: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 Seconds withCutout at Path 39...............................................................................
A-I13WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 31-I-11 BACKGROUND AND INTRODUCTION During the 3R18 spring 2015 refueling outage at Palo Verde Nuclear Generating Station (PVNGS) Unit3, visual examinations of the reactor coolant pump (RCP) suction safe end revealed evidence of leakagein the annulus between the outer surface of the Alloy 600 instrument nozzle and the bore on the suctionsafe end. The most likely location of the flaw(s) is in the primary water stress corrosion cracking(PWSCC)-susceptible Alloy 82/182 weld and Alloy 600 instrument nozzle, along their fusion line insidethe safe end bore. The Alloy 600 instrument nozzle is attached with a partial penetration weld to theinside of the RCP suction safe end.The "half-nozzle" repair method was used to replace a portion of the Alloy 600 one-inch instrument nozzle as an alternative to the ASME Section XI [1] requirement to correct the observed leakage.
Therepair was made with an Alloy 690 PWSCC-resistant material half-nozzle, which was attached to the PaloVerde Unit 3 RCP suction safe end outside diameter.
For the half-nozzle repair [51, the instrument nozzleis severed on the outside of the RCP suction safe end. The remaining lower portion of the instrument nozzle is removed by boring into the suction safe end. The removed portion of the Alloy 600 instrument nozzle is then replaced with a section (half-nozzle) of a more PWSCC-resistant Alloy 690 material, whichwill then be welded to the outside surface of the suction safe end using a 52M weld filler (see Figure 1-1).The inner portion of the original instrument nozzle, including the partial penetration weld, is left in place.The half-nozzle repair has been successfully implemented on 73 Alloy 600 small-bore reactor coolantsystem hot leg nozzles (i.e., pressure taps, sampling line, and resistive temperature device thermowell nozzles) for Palo Verde Units 1, 2, and 3 [6, 7, 30, and 31]. Additionally, the half-nozzle method hasbeen used at many other Combustion Engineering (CE) designed nuclear steam supply system plants.The purpose of this report is to demonstrate the acceptability of the half-nozzle repair for the flawed RCPsuction safe end instrument nozzle at Palo Verde Unit 3 based on the following assessments:
- ASME Section III, Class 1 design analysis and Code reconciliation, including an evaluation of theClass 2 socket weld between the instrument nozzle and piping* Corrosion evaluation
- ASME Section XI fracture mechanics evaluation
- Stress corrosion cracking assessment
- Loose parts evaluation A detailed ASME Section III, Class 1 design analysis (Section
- 3) is performed to design the replacement weld and associated new half-nozzle.
The evaluations consider the primary stress, secondary stress, andfatigue usage factors in the existing suction nozzle safe end material, replacement nozzle and weld. Theevaluations consider the change in the Class 1 pressure boundary due to moving the weld location andcorrosion effects.The fracture mechanics evaluation (Section
- 4) will demonstrate that any flaws in the partial penetration J-groove weld that remain after the half-nozzle repair will not grow to an unacceptable flaw size into thesuction safe end carbon steel metal for the remaining life of the plant.A loose parts evaluation (Section
- 5) is performed to evaluate the effect that a postulated loose weldfragment(s) of the instrument nozzle partial penetration weld might have on a reactor coolant system(RCS) structure, system, or component (SSC).WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 31-2Wesigos No-rpitr Cls _-Portions of this report contain proprietary information.
Proprietary information is identified andbracketed.
For each of the bracketed
- sections, the reasons for the proprietary classification are providedusing superscripted letters "a" "c", and "e". These letter designations are:a. The information reveals the distinguishing aspects of a process or component, structure, tool,method, etc. The prevention of its use by Westinghouse's competitors, without license fromWestinghouse, gives Westinghouse a competitive economic advantage.
- c. The information, if used by a competitor, would reduce the competitor's expenditure of resources orimprove the competitor's advantage in the design, manufacture,
- shipment, installation, assurance ofquality, or licensing of a similar product.e. The information re, veals aspects of past, present, or future Westinghouse-or customer-funded development plans and programs of potential commercial value to Westinghouse.
WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 31-3Westinghouse Non-Proprietary Class 3 1-3Figure 1-1: RCP Instrumentation Nozzle Repair Schematic WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-1Wesigos No-rpitr Cls_ -2 FINITE ELEMENT MODELINGA three-dimensional finite element model (FEM) of the RCP suction nozzle safe end, the remnant nozzle,remnant weld, half-nozzle replacement nozzle, and the half-nozzle repair weld was created.
This modelwas used to perform an ASME Section III analysis and was used to determine the through-wall timehistory stresses for a fracture mechanics evaluation.
2.1 METHOD DISCUSSION An ANSYS' [18] FEM is created using the RCP and half-nozzle repair drawings
[19]. The FEM is athree-dimensional model that includes the RCP suction nozzle safe end, the remnant nozzle, remnantnozzle-to-safe end internal J-groove weld, replacement nozzle, and extemnal J-groove weld to the safe endouter diameter.
A temperature degree of freedom (DOF) model and a displacement DOF model arecreated.
The temperature DOF model will input thermal transients and will generate time-varying temperature profiles.
The temperature
- profiles, system pressure transients, RCP nozzle safe endmechanical loads, and pressure instrumentation nozzle mechanical loads are input to the displacement DOE model, resulting in output time-varying stress profiles.
Static runs containing uniform temperature,
- pressure, and mechanical loads are performed for seismic,
- accident, and design conditions.
Stresses andtemperatures through paths through the pipe base metal, pressure tap nozzle weld, and cladding will beoutput for downstream flaw evaluations.
An ASME Section III evaluation is performed on the transient and static cases.2.2 MESHED MODELThe pressure measurement instrument half-nozzle repair and RCP suction nozzle safe end FEM is shownin Figure 2-1. A three-dimensional model is developed in ANSYS [18] with SOLID70,
- SOLID87, andSOLID90 elements for the temperature DOF model, and with SOLID185,
- SOL1DI86, and SOL1D187elements for the displacement DOE model. An overall view of the FEM and a view of the region ofinterest are shown in Figure 2-1 and Figure 2-2, respectively.
The FEA analysis included an insidediameter bore of [ ]a,c,e inches which is equivalent to a diametric corrosion of [ ]a'c'e inch. This isgreater than the allowable of [ ]ace inch and also greater than the projected corrosion value of 0.1224inch in 40 years, thus it is conservative.
For the temperature DOE model, water mesh is included in theinstrumentation region between the remnant nozzle, the safe end, and the replacement nozzle, up to theClass 1 pressure boundary at the instrumentation nozzle to piping weld. The water mesh is removed fromthe displacement DOE model for the stress runs because it does not carry load or contribute to stiffness.
The safe end portion of the model was extended 40 inches beyond the bottom safe end boundary to offsetthe mechanical load application point. The load application point requires rigid beams which locally1ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, EKM, Engineering Knowledge
- Manager, FLUENT,HFlSS and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are trademarks orregistered trademarks of ANSYS, Inc. or its subsidiaries located in the United States or other countries.
ICEM CFDis a trademark used by ANSYS, Inc. under license.
CFX is a trademark of Sony Corporation in Japan. All otherbrand, product, service and feature names or trademarks are the property of their respective owners.WCAP- 18051 -NP October 2015Revision 0
Westinghouse Non-Proprietary Class 32-2-2over-restrains the model for radial growth due to pressure.
The offset distance isolates the region ofinterest from the stresses associated with this load application method. The extra distance requires theinput moments to be adjusted to remove the extra moment produced by the lateral (i.e., x-direction and z-direction) forces applied at the 40 inch moment arm. The moment adjustments are:Mx, adjusted
=Mx, applied +4 Fzapplied X rMz,adjusted
=Mz,app lied -- Fx, ap plied X rEquation 2-1Equation 2-2In Equation 2-1 and Equation 2-2 above, r is the 40 inch model extension, and Fapplied and Mapplied are theinput loads applied to the suction nozzle safe end.a,c~eFigure 2-1: FEM (Overall Section Cut through X-Y Plane)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-3Westinghouse Non-Proprietary Class 3 2-3a~c,eFigure 2-2: FEM (Close-up View of Pressure Instrumentation Region)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-2-42.3 FEM MATERIALThe material properties used in the analysis are from the 1974 ASME Code,Section II, Subsection NAwithout addenda [21 for the original
- geometry, and from the 1998 ASME Code,Section II, Part D [3] forthe replacement pressure instrumentation nozzle and repair weld. The displacement DOF model inputsare elastic modulus, Poisson's ratio, and the coefficient of thermal expansion.
The temperature DOFmodel inputs are density, thermal conductivity, and specific heat. Poisson's ratio and density are notprovided in [2] or [3], and are taken from Table PRD of the 2013 ASME Code,Section II Part D [4].The cladding is SA-240 Type 304 [19(b)],
the suction nozzle safe end is SA-508 Class 1 [20], the remnantpressure instrumentation nozzle is SB-166 Alloy 600 [21], and the replacement pressure instrumentation nozzle is SB-166 Alloy N06690 [19(e)].
The remnant weld and repair weld match the attached nozzlematerial properties (i.e., Alloy 600 for the remnant and Alloy 690 for the replacement nozzle).
Thethermal properties of water are obtained as a function of temperature at normal operation pressure of[ ]a~c~e psia from [22].2.4 THERMAL AND PRESSURE TRANSIENTS The thermal and pressure transients for normal, upset, faulted, and test conditions used in this analysis arebased on [22 and 23]. The transients are listed in Table 2-1 and are shown in Figure 2-3 through Figure2-12. Hydrostatic Test is included for fracture mechanics evaluations.
The design specification
[22]specifies a maximum pressure of [ ]a~c~e psia; however, Article IWB-5000 of [1] specifies a maximumvalue 1.1 times the operating
- pressure, or [ ]a,c,e psia. For the analysis, a bounding value of[ ]a~c~e psia was used. Reference
[22] does not specify' a temperature curve; therefore, it was assumedthat the temperature transient matches the Leak Test temperature transient.
Table 2-1: Transients a,c,eWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-5Westinghouse Non-Proprietary Class 3 2-5a~ceFigure 2-3: Plant HeatupWCAP-1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 2-6__a~c,eFigure 2-4: Plant CooldownWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-7Westinghouse Non-Proprietary Class 3 2-7a,c,eFigure 2-5: Plant LoadingWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 2-8ac~eFigure 2-6: Plant Unloading WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-2-9ace-Figure 2-7: Reactor Trip -Envelope of Reactor Trip, Loss of Flow, and Loss of LoadWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-10Westinghouse Non-Proprietary Class 3 2-10a,c,eFigure 2-8: 10% Step IncreaseWCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-11Westinghouse Non-Proprietary Class 3 2-11a~ceFigure 2-9: 10% Step DecreaseWCAP- 1805 I-NPOctober 2015Revision 0
v2-12Westinghouse Non-Proprietary Class 3 2-12a,c,eFigure 2-10: Loss of Secondary Pressure (0 to 4,000 Seconds)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-13a,c,eFigure 2-11: Loss of Secondary Pressure (Full Range)WCAP-1I8051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 32-14Westinghouse Non-Proprietary Class 3 2-14a,c,e-Figure 2-12: Leak TestNote: The leak test temperature transient is used to evaluate the hydrostatic test transient.
The maximumpressure considered for hydrostatic test is [ ] ,ceo psi.WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-152.5 BOUNDARY CONDITIONS 2.5.1 Thermal Boundary Conditions The zone for temperature application is shown in Figure 2-13. The wetted zone for temperature includesjust the inside cavity of the nozzle; further into the nozzle solid elements representing water mesh areincluded.
The water acts only as a conductive heat transfer path and as thermal inertia; no naturalconvection is considered in this region. This is appropriate for stagnant water. The RCS flow rate is verylarge; therefore, it is appropriate to treat the heat transfer coefficient as infinite and directly apply the RCStemperature to the metal surface with the displacement constraint command (i.e., the metal surfacetemperature is instantaneously equal to the RCS water temperature).
The pipe external surfaces areadiabatic because they are insulated.
The sliced surfaces at the top and bottom of the safe end areadiabatic because the un-modeled structure would not significantly impact the thermal gradients in theregion of interest.
The temperature gradients would be radial, which is captured accurately with theadiabatic boundary condition.
a,c,eFigure 2-13: RCS Temperature Surfaces2.5.2 Structural Boundary Conditions The fixed boundary conditions are shown in Figure 2-14. The top face of the cold leg nozzle safe end isrestrained in the axial and circumferential directions.
This provides sufficient fixity to prevent rigid bodymotion and to properly react out applied mechanical loads without over-restraining the model for radialthermal growth.An array of rigid BEAM188 elements is located at the center of each load application region. Theseboundary conditions are Shown in Figure 2-15. These elements are used to input the mechanical loadsWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-16from the RCS piping and instrument Class 2 piping to the FEM. The SOLIDI 8X type elements do nothave rotational degrees of freedom; therefore, the rigid BEAM 188 elements transmit moments over agrouping of nodes on the solid elements.
The zone for pressure application is shown in Figure 2-16. Water is removed from the displacement DOFmodel and RCS pressure is applied on the entire inside surface of the pipe safe end and the pressureinstrumentation nozzle. The pipe safe end is not capped; therefore, a blowoff pressure is calculated togenerate the appropriate tensile load in the safe end. The blowoff pressure is based on the ratio of theuncapped open area to the cross-section area:32Ps=Pi(r2-r2)Equation 2-3In Equation 2-3:P = calculated blowoff pressureP = applied RCS pressurero=outer radius of annular cross-sectioninner radius of annular cross-section The inner radius used in the calculation of the safe end blowoff pressure includes the cladding, which ispart of the FEM. The safe end blowoff pressure condition is shown in Figure 2-17.The pressure instrumentation nozzle is also not capped, which results in an internal load acting in the +ydirection.
A blowoff load is applied to offset this internal load so that the forces balance in equilibrium.
The load is equal to the internal pressure times the open area and acts in the -y direction.
The load isapplied to the same mass element used for the mechanical load application.
The pressure instrumentation nozzle blowoff pressure condition is shown in Figure 2-18.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-17a,c,eFigure 2-14: Fixed Boundary Conditions WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 21aceaceFigure 2-15: Mechanical Load Boundary Conditions WCAP-1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-19Westinghouse Non-Proprietary Class 3 2-19a,c,eFigure 2-16: Pressure Surfacesa,c,eFigure 2-17: Safe eud Blowoff PressureWCAP- 1 805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-20a,c,eFigure 2-18: Instrumentation Nozzle Blowoff Load2.5.3 Mechanical LoadsRCP suction nozzle safe end loads are from [26]. The loads are provided for deadweight, five normaloperation (NOp) cases, seismic condition, and accident conditions; see Table 2-2. The accident condition is the square root sum of the squares of SSE and rupture.
The loads are provided in the global Cartesian coordinate system (where the x-axis is from the reactor to steam generator 2, the y-axis is vertical, and thez-axis follows with the right-hand rule). The suction nozzle is oriented in the vertical direction; therefore, the x-direction and z-direction loads are shear forces and bending moments, and the y-direction loads areaxial force and torque.The safe end NOp loads include deadweight.
For this analysis, the time-varying portion of the NOp loadsmust be isolated so it can be scaled independently of deadweight.
The deadweight load is subtracted fromeach of the five NOp load cases. Reference
[26] indicates that the five NOp conditions are:(1) deadweight
+ thermal without friction at full power(2) deadweight with friction at start of heatup (70°F)(3) deadweight
+ thermal with friction at end of heatup (565°F [22])(4) deadweight
+ thermal with friction at start of cooldown (565°F from [22])WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-21(5) deadweight with friction at end of cooldown (70°0F)These cases correspond directly to Heatup and Cooldown transients, and are applied coinciding with thetemperature changes during the transients.
For the Leak Test transient, the loads were interpolated forconditions (2) and (3) at 100°F and 4000F, respectively, as shown below:flOOOF =F2 + 55F _ 70F2 (10 00F -700F) Equation 2-4f4o0o0 = F2 + 5oF3 _ 70F (400°F -700F) Equation 2-5In Equation 2-4 and Equation 2-5, F2 and F3 are the heatup loads corresponding to NOp conditions (2) and(3). The NOp minus deadweight loads are listed in Table 2-3. The loads are converted into lbf and in'lbffor the ANSYS FEM.Pressure instrumentation nozzle mechanical loads from [27] are listed in Table 2-4. These loads are dueto weight and inertial effects of the Class 2 piping on the nozzle. Inertia loads due to OBE, SSE, andbranch line pipe break (BLPB) on the instrumentation nozzle itself will be derived in subsection 2.5.4.Table 2-2: Mechanical Loads on Cold Leg Pipe from [26]a,c~e-Notes:(1) Seismic and accident loads are the square root of the sum of squares of the pipe load.(2) accident
=square root of the sum of squares (SSE, rupture)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-22Table 2-3: NOp Loads without Deadweight (1) Maximum extreme values (positive or negative) are used for the NOp condition.
Table 2-4: Pressure Instrumentation Nozzle Mechanical Loads from [27]-- a,c,eNote:*] a,c,eNote:(1) SSE loads can be positive or negative.
2.5.4 Instrumentation Nozzle Inertial LoadsThe pressure instrumentation nozzle inertia loads are calculated by determining the lowest cantilever mode frequency of the nozzle and reading acceleration responses from various spectra plots at thisfrequency.
A modal analysis of the Class 2 piping and a representation of the instrumentation nozzleprovide a cantilever mode frequency of [ ]a~c, Hz. The design response spectra accelerations forseismic and BLPB loading for the instrument nozzle are listed in Table 2-5. The seismic spectraaccelerations are 1% damping for OBE and 2% damping for SSE and BLPB. The nozzle mass is []ac.e, lbs. The inertial loads are equal to the spectra acceleration multiplied by the nozzle mass, and arelisted in Table 2-6.able 2-5: Response Spectra at[ace a,c,eWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 2-23Table 2-6: Instrumentation Nozzle Inertial Load1* a,c,eWCAP- 1805 1-NPOctober 2015.*Revision 0
Westinghouse Non-Proprietary Class 32-24Westinghouse Non-Proprietary Class 3 2-242.6 STRESS PATH LOCATIONS 2.6.1 Fracture Mechanics Evaluation PathsPaths are defined in ANSYS to generate temperature and stress profiles along a given path. The paths areshown in Figure 2-19. Paths I through 6 are located on the vertical plane intersecting the pressureinstrumentation nozzle centerline and the safe end centerline (i.e., direction of hoop stress).
Paths 7through 12 are located on the horizontal plane intersecting the pressure instrumentation nozzle centerline.
Paths 13 through 24 are not shown in the figure below for clarity, but are symmetric with respect to thepaths I through 12 (i.e., paths 13 through 18 lie on the vertical plane below the instrumentation nozzleand paths 19 through 24 lie on the horizontal plane on the opposite side relative to paths 7 through 12).Stresses are provided in a cylindrical coordinate system where the x-direction is radial, the y-direction iscircumferential, and the z-direction is axial. The cut paths are locally straight; therefore, the x-direction stress is a radial stress, the y-direction stress is a hoop stress, and the z-direction stress is an axial stress,as shown in Figure 2-20.F- ~ a,c,eFigure 2-19: Flaw Evaluation PathsWCAP- 18051-NPOctober 2015Revision 0
v ._2-25Westinghouse Non-Proprietary Class 3 2-25a,c,eFigure 2-20: Stress Orientation for Downstream Flaw Evaluation WCAP-1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-26Westinghouse Non-Proprietary Class 3 2-262.6.2 Section III Evaluation PathsThe ASME evaluation is focused on stresses in the replacement pressure instrumentation nozzle, the weldbetween the replacement nozzle and the safe end, and region on- the safe end around the instrumentation nozzle opening.
Figure 2-21 through Figure 2-26 show typical paths used in the ASME evaluation.
Theterm "cut" is used in the figures to denote a stress evaluation path. In general, all paths are repeatedaround the instrumentation nozzle in 900 intervals.
Additional paths are also included to capture specificnodes with high stress ranges, not shown in the following figures.Figure 2-21 shows the typical paths in the RCP suction nozzle safe end. These paths are shown with halfof the nozzle opening hidden. There are twelve paths on the inner radius of the nozzle hole opening (in3Q0 intervals),
and five paths on the outer radius of the hole opening near the chamfer cut for the remnantweld (paths 6 and 9 shown below). The paths on the inner radius of the nozzle hole opening are excludedfrom the primary membrane (Pmo) stress check of the safe end because they are located at a peak stresslocation.
Paths 6 through 9 are used for the Pm check on the safe end.-, a,c,eFigure 2-21: Typical Paths in RCP Suction Nozzle Safe endWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-27Westinghouse Non-Proprietary Class 3 2-27Figure 2-22 shows the typical paths on the replacement nozzle weld. These paths are repeated in 900intervals around the nozzle axis. Corresponding paths are set radially into the nozzle body atapproximately equal nodes, as shown in Figure 2-23.__ ~a~ce-Figure 2-22: Typical Paths in Attachment Weld Cross-section a,c,e-Figure 2-23: Typical Paths in Nozzle Body Cross-section WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-28The paths in the weld region are divided, such that only paths on the primary shear plane of the weld areused in the primary membrane stress check. All other weld path membrane stresses are at peak stresslocations.
Paths 18, 19, 22, 23, 26, 27, 30, and 31 are included in the primary membrane (Pm) stresscheck. A cutaway of the weld is shown in Figure 2-24, with paths 18, 19, 30, and 31 shown.a,c,eFigure 2-24: Typical Primary Membrane (Pmo) Weld Path Locations WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-29Figure 2-25 and Figure 2-26 show the typical paths in the outer region of the replacement nozzle. Thesepaths capture high stress areas in the fillet and transition region of the nozzle.-- a,c,eFigure 2-25: Typical Path Locations in Nozzle Fillet Regiona,c,eFigure 2-26: Typical Path Locations in Outboard End Region of NozzleWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-30Westinghouse Non-Proprietary Class 3 2-302.7 FINITE ELEMENT RESULTS FOR USE IN FRACTURE MECHANICS EVALUATIONS Figure 2-27 through Figure 2-29 show the stress intensity contour plots for some of the limitingtransient cases for the Cooldown, Reactor Trip, and Loss of Secondary Pressure that are evaluated in the fracture mechanics analysis.
Figure 2-27: Stress Intensity Contour Plot, End of CooldownNote: Stress displayed in the above figure is in units of psi.a,c,eWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 32-31Westinghouse Non-Proprietary Class 3 2-31a~ceFigure 2-28: Stress Intensity Contour Plot, Reactor Trip at Time = 62.9 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 232-32a,c,eFigure 2-29: Stress Intensity Contour Plot, Loss of Secondary Pressure at Time = 75 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-13 ASME SECTION III EVALUATION An ASME Section [II evaluation is performed to demonstrate the structural integrity of the half-nozzle repair geometry with regards to primary stresses, primary plus secondary
- stresses, and fatigue usagefactors.
Stress intensity values are calculated using the FEM detailed in Section 2. Primary, primary plussecondary, and peak stresses are evaluated using the paths shown in subsection 2.6.2.3.1 ACCEPTANCE CRITERIAPer the ASME Code reconciliation in [17], the replacement nozzle was procured to the 1998 ASME Codeyear up to and including 2000 Addenda [3]. The construction Code for the existing RCP is 1974 with noaddenda [2]. Therefore, the existing material is qualified per the construction code [2], and the newreplacement nozzle and attachment weld are qualified to the newer code year, 1998 with 2000 Addenda[3].3.1.1 ASME Section III Design RulesThe welds connected to the new nozzle in this half-nozzle repair are governed by design rules in SectionIII of [2 and 3]. This includes the attachment weld connecting the replacement nozzle to the RCP safeend and the socket weld connecting the replacement nozzle to downstream Class 2 piping.Attachment WeldPer Section NB-335 1.4 of [3], this is a Category D weld meeting the requirements of Section NB-4244(d)
[3] for attachment of nozzles using partial penetration welds. Therefore, Figure N~B-4244(d)-I applies tothis type of attachment weld. Section (c) of Figure NB-4244(d)-1 is the most applicable to this design, asshown here in Figure 3-1.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-2Westinghouse Non-Proprietary Class 3 3-2Cc1(Note (1)]GENERAL NOTES:Ia) Weld deposit reinforcement, if used, shell be examined as required in NS-5244.lb) The 3/ t. mai. dimension applies to the fillte leg and the J-groove depth.{cd Weld groove design for oblique nozzles of this type requires special consideration to achieve the 1.25th minimum depth ofweld and adequate access for welding inspection.
With due regard to the requirements in Fig. NO-4244(c)-1, the welds shownin the sketches may be on either the inside or the outsida.
Weld preparation may be J-groove as shown or straight bevel, Ifweld deposit reinforcement is not used. r, shell apply to 1.0. of base materiel instead of I.D. of weld buildup.IdI For definitions of symbols, see NB-3352.4(d) for vessels and N 8-3643 for piping.FIG. NB-4244(d)-1 PARTIAL PENETRATION NOZZLE AND BRANCH PIPING CONNECTIONS Figure 3-1: Attachment Weld Design Requirements
[31The requirement for the size of the weld is that the groove depth be at least 3/4ta, where t. is the nozzlebody thickness.
The nozzle body thickness, t., is equal to [ ]a.Cde inches. The minimum requireddepth is 3/4 x [ ]a c... inches = [ ]a.C~C inches. The design weld depth is 1/2 inch, and is greaterthan the required
[ ]a~CC inches. The 3/4tn requirement also applies to the width of the fillet weld leg,as shown Figure 3-1. The fillet weld length is [ inches. This also meets the 3/4t. requirement.
Figure NB-4244(d)-1, (c) of [3] also requires that the total weld size of the groove depth plus fillet legheight be a minimum of 1 .5th. The full weld size is 3/4 inches, which is greater than the required[ ]asce inches (1.5 x [ ]a,c,e inches =[ ]a5c~ inches).Socket WeldThe Class 2 socket weld connecting the instrumentation nozzle to the downstream piping is qualified bydesigning the socket weld according to Section NC-3661 .2 of [2]. Because the weld is sized according todesign-by rules, it is qualified within the qualification of the existing Class 2 piping.Section NC-3661.2 of [2] references Figure NC-4427-1, which calls for a fillet weld leg size of 1.09 timesthe piping thickness.
The socket weld is designed in accordance with [28] using a 2:1 ratio. Using this2:1 ratio, the minimum fillet weld leg is 1.09 times the piping thickness on the shorter leg and 2.18 timesthe thickness along the pipe axis. This layout is shown in Figure 3-2.WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-3Westinghouse Non-Proprietary Class 3 3-3tn~~ j..' I- x -- x =1.09 xtn1--- for welds to fittings= smaller of .4xxtnWELD -, I or hub thickness
.-2X, for welds to flanges21K' GAP = 1/16"' MIN.Figure 3-2: Socket Weld Design Criteria 1281The attached Class 2 piping is 3/4-inch Schedule 160. The thickness of the pipe is [ ]a~ce inches. Theminimum fillet leg sizes are [ "]a~C~e inches and [ ]a'c'e inches (1.09 x [ in = [ ]a,c,e in,2 x [ a,c,e in =[ ]a,c,e in). The socket weld fillet sizes of [ ]ace inches and [ ]aC'e inchesexceed this requirement.
Section NC-3661.2 of [2] cites the ANSI Standard B 16.11 [291. However, the dimensional information inB 16.11 is not a requirement, as discussed in Section 1.2 of [29]. All dimensions related to the design ofthe fitting (bore depth, diameter, etc.) have been designed on the replacement instrumentation nozzle tomatch the original design.3.1.2 Section III Evaluation Stress Allowable ValuesAll stress evaluations are performed in accordance with Section NB-3200 of [2 and 31. According to NB-3225, the rules of Appendix F of [2 and 3] apply for faulted conditions (service Level D). All stressintensities (SI) are derived in accordance with Section NB-321 5 [2 and 3]. Stress intensity limits are inaccordance with Figure NB-3221-l for design conditions and Figure NB-3222-1 for normal and upsetconditions (service Levels A and B). There are no emergency (Level C) conditions specified."
Testconditions are evaluated in accordance with Section NB-3226.
Special stress limits are evaluated for pureshear on the attachment weld for all loading conditions.
The pure shear check applies only to the weld paths. However, these checks are included for all paths forsimplicity in post-processing.
Maximum Average ShearDefinition:Tax=5/
Maximum shear is set as half of the overall stress intensity for membrane stresses only. Membranestresses are used because this is a stress check for pure shear, without consideration of bending.Therefore, tmm, = Pm/2.This is the maximum overall shear stress for pure shear loading.Table 3-1 lists the applicable Sm and Sy, values for the RCP suction nozzle safe end and replacement instrumentation nozzle. The material strength properties for the replacement nozzle are used forevaluation of the attachment weld. The weld material used for this repair was ERNiCrFe-7A.
This is anew weld material that did not exist in the 1974 or 1998/2000 ASME Codes. Therefore, the materialproperties for the weld filler material are taken from a recent version of ASME for comparison
[4].WCAP- 1805 I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-4Section SFA-5.14/SFA-5.14M of Section II, Part C of [4] shows a minimum tensile strength forERNiCrFe-7A filler metal of 85 ksi. This is slightly higher than the ultimate strength of the Alloy 690base metal (S, = 80 ksi, as shown in Table 3-1). Therefore, it is acceptable to use the material strengthproperties of the SB-166 alloy for the ERNiCrFe-7A weld filler material.
Table 3-1: MaeilSrnt Prop~erties~te Copnn aeilMaterial Sm Sy Su ASME CodeReference (at 650°F) (at 4000F)(l)
(at 650°F) YearRCP Suction SA-508 Class 1 [0 70ki 3. s oe217 2Nozzle Safe end (Carbon Steel) [0 70ki 3. s oe217 2Replacement S-6 lo 1() 33ki 2. s 00ki 19 3Instrumentation NB-0669Alo Nozzle _________
______________
Notes:(1) The value of Sy is only used for the test condition allowable.
Therefore, it is taken at the test condition temperature of 400°F.(2) Values for ultimate
- strength, Su, are not available in the 1974 Code year [2]. The ultimate strength is only used forthe allowable stress under faulted conditions (minimum of 2.4Sm and 0.7Su). Therefore, the value of 2.4Sin is usedfor that allowable stress check.Table 3-2 summarizes the load case combinations used for each load case as they apply to the ASMEgroupings of design, Levels A and B, Level D, and test conditions.
There are no Level C conditions forthis analysis.
Table 3-2: ASME Load Case Combinations Condition Case [Definition Design Design Conditions Pressure
+Deadweight LoadsPlant HeatupPlant CooldownPlant LoadingNormal Plant Unloading Applicable Pressure and Thermal Transient (Level A) 10% Step Increase
+ Normal Operation Mechanical Loads(+20°F, +100 psi)10% Step Decrease(-20°F, -100 psi)Reactor Trip, Loss of Flow, Upset Pressure and Thermal Transient
+Loss o LoadMechanical LoadUpsetNormal Operation Pressure and(Level B) OBE Temperature
+ Safe end and________________________
Instrumentation Nozzle OBE loadsLoss of Secondary Pressure Thermal andFaulted Loss of Secondary Pressure Pressure Transient (Level D) Safe Shutdown Earthquake (SSE) Normal Operation Pressure andSSE and Pipe Break Temperature 4- Accident LoadTest Leak Test Pressure and Thermal Transient
+ Normal Operation Mechanical LoadsWCAP- 1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-5Table 3-3 summarizes the allowable stresses for all loading conditions for the 1974 Code year [2], whichis applicable to the SA-508 Class 1 RCP suction nozzle safe end. Table 3-4 summarizes the allowable stresses for all loading conditions for the 1998 Code year with 2000 Addenda [3], which is applicable tothe SB-166 replacement nozzle and weld material.
WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-6Table 3-3: Section III Allowable Stresses for RCP Suction Nozzle Safe end, 1974 Code Year [2]ASME RCP Suction Nozzle Safe endCondition t2) Stress Category")
Reference Lmt Sm or Sy. (ksi) Allowable (ksi)Primary Membrane Stress Intensity, Pm NB-3221.1 Sm 17.0 17.0Local Primary Membrane Stress Intensity, PL NB-3221.2 1.5 Sm 17.0 25.5DeinPrimary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3221.3 1.5Sm 17.0 25.5Maximum Average Primary Shear Stress NA -Pure shear stresses are only evaluated for the weld.Normal and Primary + Secondary Stress Range (Pmo + Pb + Q) NB-3222.2 J 3Srm 17.0 51.0Upset Cumulative Usage Factor NB-3222.4
] 1 -- j Ui < 1.0(Levels A_______
________and B)(3) Maximum Average Primary Shear Stress NA -Pure shear stresses are only evaluated for the weld.TetPrimary Membrane Stress Intensity, Pm NB-3226(a)
- 0. 9Sy -Sy =30.0 ksi 27.0Primary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3226(b) 1.5y at 400°F 40.5Faulted Primary Membrane Stress Intensity, Pm F-1323.1 (b) 2.4Sm 17.0 40.8(Level D) Primary Membrane
+ Bending Stress Intensity (PL + Pb) F-1323.1(b) 1.5x2.4Sm 17.0 61.2Notes:(1) ANSYS membrane stresses include general (Pmo) and local (PL) effects.
The PL evaluation is bounded by the Pm evaluation, which has lower allowable stresses.
(2) There are no emergency conditions specified for this design [22]. The plant leak test is included in the fatigue evaluation.
- (3) The normal allowable stress for primary +/- secondary stresses is used to qualify the normal and upset transient cases. This is conservative because theallowable stresses may be increased by 10% for upset conditions.
WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-7Table 3-4: Section III Allowable Stresses for Replacement Nozzle and Weld, 1998 Code Year [31Cdiin2StesASME Limit SB-166 Alloy 690Cniin)StesCategory~l)
Reference Smn, Sy, or Su. (ksi) Allowable (ksi)Primary Membrane Stress Intensity, Pm NB-3221.1 Sm 23.3 J 23.3Local Primary Membrane Stress Intensity, PL NB-3221 .2 1 .5Sm See Note 1Design Primary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3221.3 1.5Sin 23.3 35.0Maximum Average Primary Shear Stress (Minimum Allowable of NB-3227.2(a) 0.6Si233n4.
Average and Maximum Shear Paragraphs)
NB-3227.2(b) 0.8Sm________
Normal and Primary + Secondary Stress Range (Pmo + Pb + Q) NB-3222.2 3Sin 23.3 69.9Upset Cumulative Usage Factor NB-3222.4 1 -- Ui < 1.0(Levels A Maximum Average Primary Shear Stress (Minimum Allowable of NB-3227.2(a) 0.6Sm 331.and B)3) Average and Maximum Shear Paragraphs)
NB-3227.2(b) 0.8Sr, 23.3______
14.0____Primary Membrane Stress Intensity, Pm NB-3226(b) 0.9Sy Sy = 28.6 ksi at 25.7Test Primary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3226(C) 1 .358y4) 400°F 3.Maximum Average Primary Shear Stress (Minimum Allowable of NB-3227.2(a) 0.6Si233n4.
Average and Maximum Shear Paragraphs)
NB-3227.2(b) 0.8Sin ________PrmryMmbae tes ntnitPmF1311()
Lesser of Sm=23.3 55.9FaultedraeSresItesty mF-13.1()
2.48m, 0.7Su Su=80.0Fauted1.5 x P1,(Level D) Primary Membrane
+ Bending Stress Intensity (PL + Pb) F-1331.1 (c) allowable
-- 83.9Maximum Average Primary Shear Stress F- 1331.1 (d) 0.42Su 80.0 33.6Notes:(1) ANSYS membrane stresses include general (Pmo) and local (PL) effects.
The PL evaluation is bounded by the Pm evaluation, which has lower allowable stresses.
(2) There are no emergency conditions specified for this design [22]. The plant leak test is included in the fatigue evaluation.
(3) The normal allowable stress for primary + secondary stresses is used to qualify the normal and upset transient cases. This is conservative because theallowable stresses may be increased by 10% for upset conditions.
(4) Per Section NB-3226(c)
[3], the allowable stress for Pm +-Pb is 1.35 Sy, only when Pm is less than 0.67 Sy,. The results for the SB-166 material in Section3.2.3 show the maximum Pm for test condition is 12.39 ksi, which is less than 0.67 Sy (19.l6 ksi).WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-83.1.3 Design Fatigue Curves for Section III AnalysisThe design fatigue curves used in the fatigue analysis of the RCP suction nozzle safe end and thereplacement nozzle and weld are tabulated from the appropriate ASME references, as shown in Figure 3-3and Figure 3-4.For the RCP suction nozzle safe end, the applicable fatigue curve is reported in Figure 1-9.1! in Subsection NA of the 1974 Code [2]. The plot in Figure 1-9.1 shows two curves, for ultimate tensile strength lessthan 80 ksi or between 115 ksi and 130 ksi. The dashed curve for Su, < 80 ksi is used for the SA-508material.
Figure 3-3 summarizes the data tabulated from Figure 1-9.1. The alternating stress values arescaled based on the ratio of the modulus of SA-508 Class l at the maximum cycle temperature versus themodulus that the fatigue curve was developed for. In this case the modulus at temperature is taken at thedesign temperature of 650°F as 26.05x106 psi. The fatigue curve was developed for a modulus of30.0X 106 psi. The ratio is then calculated as 26.05/30.0.
K Design Fatigue Curve for SA-508 Class 11.E+03E = 26.05E+03 ksi @650°FAdjusted Data = RawData x (26.05/30)
'Im1.E+021.E+01----Adjusted Data----Figure I-9.1 RawData1.E+O00...
1.E+011. E+021. E+031.E+051.E+061.E+04Number of CyclesFigure 3-3: Design Fatigue Curve for SA-508 Class 1, per Figure 1-9.1 [21WCAP-1805 l-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-9The applicable fatigue curve for the replacement nozzle and weld SB- 166 material is reported in Figure I-9.2.1 and Figure 1-9.2.2 in Appendix I of the 1998 Code [3]. Figure 3-4 summarizes the data tabulated from the two figures (numerical values for the design fatigue curve are shown in Table 1-9.1 and Table I-9.2.2 [3]). The data for curve C from Figure I-9.2.2 are used to obtain the most conservative result. Thealternating stress values are scaled based on ratio of the modulus of SB-166 at the maximum cycletemperature versus the modulus that the fatigue curve was developed for. In this case the modulus attemperature is taken at the design temperature of 6500F as 27.85x106 psi. The fatigue curve wasdeveloped for a modulus of28.3x10 6 psi. The ratio is then calculated as 27.85/28.3.
Design Fatigue Curve for 5B-1661.E+031.E+021.E+01E = 27.85E+03 ksi @650°FAdjusted Data = RawData x (27.85/28.3)
Figure I-9.2.1 RawData---Adjusted Data1.E+03 1.E+05 1.E+07 1.E+09Number of Cycles1.E+11Figure 3-4: Design Fatigue Curve for SB-166, per Figure 1-9.2.1 and Figure 1-9.2.2 [3]WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-10WetnhueNnPoreayCas331 3.2 STRESS RESULTSThe stress results are separated into the following conditions:
design, normal and upset (Levels A and B),test, and faulted (Level D). To evaluate the various stresses for each case, a set of 80 path locations wasestablished to output linearized stresses at key locations.
The same path locations were used for all cases.The result tables in this section show the worst-case path for each stress result. Plots showing thesespecific paths are included in Appendix A.3.2.1 Design Condition Table 3-5 summarizes the results for the design condition.
All stresses are shown to be within theallowable limits of [2 and 31.-- Table 3-5: Design Condition Stress Resultsa,c,eWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class33-113.2.2 Normal and Upset Conditions (Levels A and B)Table 3-6 summarizes the results for the normal and upset conditions.
All stresses are shown to be withinthe allowable limits of [2 and 3]. The primary stress checks for Levels A and B conditions are boundedby the design condition evaluations.
The Upset condition includes OBE loading, as well as an envelopetransient including Reactor Trip, Loss of Flow, and Loss of Load. This enveloping transient goes slightlyabove design pressure.
- However, this increase in pressure is bounded by the 10% increase in allowable stresses for Level B conditions per NB-3223 [2 and 3].The case pairings listed in Table 3-6 are for the highest stress range on each component.
Table 3-6: Normal and Upset Condition Stress Resultsa,c,e3.2.3 Test Conditions Table 3-7 summarizes the results for the test condition.
All stresses are shown to be within the allowable limits of [2 and 3].-Table 3-7: Test Condition Stress Resultsa,c~eWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-12Westinghouse Non-Proprietary Class 3 3-123.2.4 Faulted Condition (Level D)Table 3-8 summarizes the results for the faulted conditions.
All stresses are shown to be within theallowable limits of [2 and 3].Table 3-8: Faulted Condition Stress Results -1 a~ceWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 313-133.2.5 Fatigue Evaluation Table 3-9 summarizes the results of the fatigue evaluation for the RCP suction nozzle safe end and thereplacement nozzle. The total cumulative usage was calculated at each path node for the SA-508 suctionnozzle safe end, SB-166 replacement nozzle, and replacement weld materials separately.
The results ofthe fatigue evaluation include all Level A, Level B, and the leak test transient cases, including OBEloading.Table 3-9: Fatigue Evaluation Results a,c,e3.3 VIBRATION ASSESSMENT Section 4.3 of [23] states that the RCS may experience vibratory excitation with frequencies of:* [ ]a,c~e CPS -lower range* Ii* []ac... CPS -middle range]ac~e CPS -upper rangeThe replacement instrumentation nozzle has relocated the attachment weld; therefore, the naturalfrequency of the nozzle and the attached Class 2 piping are evaluated to ensure that neither is within theexcitation ranges.This minimum piping frequency is [ ]a,c,e Hz and the instrumentation nozzle frequency is [ ]a,c,eHz to [ ]a'c'e Hz. Both of these modes are outside of the restricted ranges, which is acceptable toavoid a resonant vibration issue. All other frequencies are well outside of the restricted ranges.Since the replacement instrumentation nozzle was installed, APS has performed vibration testing tomonitor the potential vibration of the system due to the repair. The evaluation in [24] shows that themaximum displacement of the system was no greater than [ ]ac, mils (peak-to-peak).
The calculated peak velocity due to this level of vibration was [ ]ace' inches per second, which is well below theallowable of 0.5 inches per second [25], as discussed in [24].WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-14 FRACTURE MECHANICS EVALUATION The fracture mechanics evaluation conservatively assumes that the entire radial extent of the partialpenetration weld is hypothetically flawed in either the axial or circumferential orientation.
Therefore, tosupport continued operation of Palo Verde Unit 3 with a half-nozzle repair to the RCP suction safe endinstrumentation nozzle, a fracture mechanics evaluation is performed herein in accordance with theASME Section XI acceptance criteria
[1]. This evaluation demonstrates structural integrity of the RCPsuction nozzle safe end with the flawed partial penetration weld for 40 years of plant operation.
Anoperation duration of 40 years envelops the remaining life of Palo Verde Unit 3, including licenserenewal.The evaluation performed herein also considers the analysis of small diameter Alloy 600/690 half-nozzle repairs in WCAP- 15973-P-A
[5] and Relief Request 31, which was previously submitted and approvedfor the Palo Verde Units 1, 2, and 3 small-bore hot leg Alloy 600 nozzles [6, 7, 30, 31].The methodology used in the fracture mechanics evaluation is described in Section 4.1, which includesfatigue crack growth of the postulated flaw into the safe end base metal. Section 4.1 also discusses thestructural integrity of the safe end base metal with the final flaw size after 40 years of fatigue crackgrowth. The crack growth an'd structural integrity results are provided in Section 4.2.4.1 METHODOLOGY In order to demonstrate structural integrity of the RCP suction nozzle safe end with the flawed partialpenetration weld for 40 years of plant operation, a crack growth evaluation is first performed for ahypothetical initial flaw encompassing the entire radial extent of the abandoned partial penetration weld.Since the actual flaw size in the weld is not available, the initial flaw size is conservatively assumed to bethe entire radial extent of the partial penetration weld, which would expose the RCP suction safe end basemetal to the reactor coolant environment.
The purpose of the fatigue crack growth (FCG) evaluation is todetermine the growth of postulated axial and circumferentially oriented flaws, which are initially the sizeof the partial penetration weld, into the safe end base metal for a service life of 40 years. The primarygrowth mechanism in ferritic steels is due to fatigue crack growth, and the FCG rate for ferritic steelmaterial in a pressurized water environment is based on the guidelines provided in Article A-4000 of theASME Section XI Code [1]. The FCG evaluation is fully discussed in Section 4.1.1. The final flaw sizeafter 40 years of fatigue crack growth is then evaluated based on the flaw size acceptance criteria ofASME Section XI, Appendix C, which is specific to the evaluation of flaws in piping.According to ASME Section III, NA-3254.
1, the boundary between the component (pump) and piping isthe limit of reinforcement not closer than the first circumferential weld joint in welded connections.
Therefore, for the purpose of the fracture mechanics evaluation contained herein, the RCP suction safeend is considered as part of the piping in accordance with ASME Section III, NA-3254.1I.
Therefore, thefinal flaw size after 40 years of fatigue crack growth is evaluated for acceptability based on the flaw sizeacceptance criteria of ASME Section XI, Appendix C, which is specific to the evaluation of flaws inpiping.The procedures of Article C-4220 of the ASME Section XI Code will be followed to determine the failuremode and analysis method. The screening criteria of Section Xl Article C-43 10 and Figure C-4220-1I WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class_ 4-4-2provide the methodology for defining the appropriate analysis method of limit load, Elastic PlasticFracture Mechanics (EPFM), or Linear Elastic Fracture Mechanics (LEFM).The calculation of the flaw growth and the acceptability of the final flaw size are based on normal, upset,emergency, faulted and test conditions based on the pressure and thermal transient stresses and weldingresidual stresses in accordance with the 2001 Edition with 2003 Addenda of the ASME Code [1 ], which isthe current code of record for Palo Verde Unit 3.4.1.1 Fatigue Crack GrowthThe fatigue crack growth analysis procedure involves postulating an initial flaw at the region of concernand predicting the growth of that flaw due to an imposed series of loading transients.
The input requiredfor a fatigue crack growth analysis is essentially the information necessary to calculate the range of cracktip stress intensity
- factors, AKt, which depends on the crack size and shape, geometry of the structural component where the crack is postulated, and the applied cyclic stresses.
The normal, test, and upset operating transients from Table 2-1 are considered in the fatigue crack growthanalysis.
The full amount of transient cycles shown in Table 2-1 is distributed equally over a plant life of40 years. The crack growth rate curves used for the ferritic steel are taken directly from Article A-4000in Appendix A of the ASME Section XI Code [1]. The crack growth rate (da/dN) is a function of theapplied stress intensity factor range (AKI) and the R ratio (Kmin/Kmax) for the transient.
The general formfor fatigue crack growth is as follows:da/dN =Co(AK1)n (in./cycle)
Where:AKI Kmax -KminR =Kmjn/Kmax (Kmin > 0)R =0 (Kmin -<0)Co = 0 for AK1 < AKthAKth =5.0(1-0.8R)
According to Article A-4000 of the ASME Section XI code, the limiting crack growth results based onusing the n and Co values for FCG in air from A-4300(b)(1) or those for water from A-4300(b)(2) shouldbe used. The FCG rates for both environments are discussed below.Fatigue Crack Growth Rate for Air (AK1 values in ksiV/i):da/dN =1.99 xl0-'° (S)(AK1)3"07 (in./cycle)
Where: S = 25.72 (2.88-R"3'07Fatigue Crack Growth Rate for Water (AK1 values in ksiVq-n):
AKknee= 17.74 (0 < R _<0.25)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-3Westinghouse Non-Proprietary Class 3 4-3AKknee= I 7.74[(3.75 R+0.06)/(26.9 R-5.725)]° 25AKknee= 12.04(0.25 < R < 0.65)(0.65 < R < 1.0)For low AK1 values (AK1 < AKknee):daldN = 1.02 xlO0-2 (S)( AK1)5"95 (in./cycle)
Where:S =1.0= 26.9 R-5.725= 11.76(0 < R < 0.25)(0.25 < R < 0.65)(0.65 < R <1.0)For high AK1 values (AK1 > AKknee):da/dN =1.01 x10-7 (S)(AK1)1.95 in/cycleWhere:S = 1.0= 3.75 R + 0.06=2.5(0 < R< 0.25)(0.25 < R < 0.65)The calculation of the stress intensity factor Kmax, Kn~ will be determined based on the discussion givenin Section 4.1.3.4.1.2 Structural Integrity of the RCP Suction Safe EndAfter the fatigue crack growth of the hypothetical flaws into the RCP suction safe end base metal hasbeen calculated, the acceptability of the final flaw size is determined based on the flaw size acceptance criteria in Appendix C of the ASME Section XI Code [1]. The first step in establishing the acceptability of the final flaw size is to determine the failure mode for the operating transients.
4.1.2.1 Determination of Failure ModeArticle C-4220 of the ASME Section Xl Code defines the procedure used in the determination of failuremode and the analysis method for ferritic piping. In accordance with Figure C-4220- 1 in the ASMESection XI Code, the Appendix C screening computations are used to determine the failure analysismethod based on limit load, EPFM, or LEFM methodologies.
The screening criteria are particularly important when metal temperatures are below the upper shelf of the Charpy Energy curve. Attemperatures above the upper shelf of the Charpy Energy curve, the evaluation would be based on EPFMsince the fracture toughness can be described with elastic plastic parameters at these higher temperatures.
Figure C-4220-1 of the ASME Section XI Code demonstrates the flow chart used with the screening criteria to select the analysis criteria.
According to the flow chart the selection of the appropriate analysismethod is as follows:SC = K'r/S'rWCAP-l 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 4-4SC < 0.2 Limit Load0.2 <SC < .8 EPFMSC > 1.8 LEFMWhere:SC = Screening
- Criteria, dimensionless K'r =Ratio of stress intensity factor to material toughness, dimensionless Sr=Ratio of applied stress to the stress at limit load, dimensionless The K'r or S'r terms are determined as follows:K'r= [1000 K2/(E'J~c)]
0"5E'=E/(1-v 2)S'r= Op/G'fWhere:K1 = Applied stress intensity factorE =Young's modulusv = Poisson's ratioJic =Measure of toughness due to crack extension Go =Primary stress= Flow stress, average of yield and ultimate strengths For the S'r term of the screening
- criteria, only primary stress should be considered as this term represents limit load due to plastic collapse.
Also, the screening criteria computations contained in Article C-4000are specific to semi-elliptical axial and circumferential flaws in a pipe; however, for the case contained herein the postulated flaws are in the shape of double corner flaws at the edge of a hole, as shown inSection 4.1.3. Therefore, the flow stress is conservatively used in the calculation of S'r since the use offlow stress, instead of stress at limit load, would result in the more conservative LEEM failure mode. Itshould be noted that in the screening
- criteria, the primary, secondary, and residual stresses are included inthe calculation of the K1 term.Additionally, yield strength values based on ASME Section XI Table C-8321-1 for circumferential flawsand Table C-8322-l for axial flaws are used in the screening criteria calculations.
Since there isinsignificant data to generate a Charpy impact energy curve based on the available Certified Material TestReport (CMTR) data, the upper shelf temperature is conservatively estimated to be at 200°F, asrecommended by Appendix C of the ASME Section Xl Code. The screening criteria are used todetermine the appropriate failure mode and analysis method for low temperature time steps in selecttransients (i.e., Heatup/Cooldown).
Above 200°F, the analysis method is based on EPEM since thefracture toughness can be described with elastic plastic fracture mechanics parameters.
The calculation of Jmc for axial and circumferentially oriented flaws is in accordance with paragraph C-8320. For axial flaws the J1.value can be estimated based on fracture toughness (K1t) as follows:WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-5Jic= 1000O(K10)2/E'The K10 value is determined based on ASME Section XI, Appendix A-4200, which provides a lowerbound approximation of fracture toughness for ferritic material.
Similarly for a circumferential flaw,paragraph C-8321I states that the Jh, value may be determined based on reasonable lower-bound fracturetoughness data. Therefore, the J10 value for use with circumferential flaws is determined in the same wayas the axial flaw Jk value. In the transition temperature region, the fracture toughness can be represented by the following equation:
K10 33.2 + 20.734 exp[0.02 (T-RTNDT)]
Where K1.is in ksivq/i, T and RTNDT are as follows:T = crack tip temperature
(°F)RTNDT = reference temperature for nil ductility transition (0F)For the RCP suction safe end, the RTNDT is 400F according to the RCP suction safe end Certified MaterialTest Report.The methodology used in the LEFM and EFPM are described in the two following sections.
4.1.2.2 Linear Elastic Fracture Mechanics The evaluation procedure and acceptance criteria used to demonstrate structural integrity of ferritic pipein the LEFM regime is contained in Appendix C, Article C-7000 of ASME Section XI Code [1]. TheLEFM evaluation is particularly important at temperatures below the Charpy upper shelf since attemperatures above the upper shelf on the Charpy Energy curve, the fracture toughness can be described with elastic plastic fracture mechanics parameters.
To determine whether a flaw is acceptable forcontinued service without repair, the acceptance criteria for normal, upset, emergency,
- faulted, and testconditions must be met. The acceptance criteria are based on the crack tip stress intensity factor, asfollows:KI < (JlcE'/1000)0.5 Which simplifies to K1 _< K10 since the K10 value determined based on ASME Section XI, Appendix A-4200 is used to calculate J10 as discussed in Section 4.1.2.1.
The determination of K1 is as follows [1 ]:KI= SFmKir+ SFbKIb+ KirWhere:K1 = Applied stress intensity factor including safety factors (Section 4.1.3)Kim = Stress intensity factor due to membrane stress (primary and secondary)
KIb = Stress intensity factor due to bending stress (primary and secondary)
Kir = Stress intensity factor due to residual stressWCAP- 1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-6S~im = Safety factor for membrane stress based on Service LevelSFb = Safety factor for bending stress based on Service LevelThe safety factors are from ASME Section XI paragraph C-2621I for circumferential flaws and C-2622 foraxial flaws and are shown in Table 4-1. Test conditions are evaluated as Service Level B in accordance with paragraph C-2620.Table 4-1: ASME Section XI, Appendix C Safety FactorsCircumferential Flaw Axial FlawService Level SFm SFb SFmA 2.7 2.3 2.7B 2.4 2.0 2.4C 1.8 1.6 1.8D 1.3 1.4 1.34.1.2.3 Elastic Plastic Fracture Mechanics The evaluation procedure and acceptance criteria used to demonstrate structural integrity of ferritic pipein the EPFM regime are contained in Appendix C, Article C-6000 of ASME Section Xl Code [1].Additionally, general EPFM evaluation procedures for ferritic components in Appendix K of ASMESection XI Code and Regulatory Guide 1.161 [8] are used. Although the original purpose of Appendix Kwas to evaluate reactor vessels with low upper shelf fracture toughness, the general approaches inparagraph K-4220 and K-43 10 are equally applicable to any region where the fracture toughness can bedescribed with elastic plastic parameters.
Therefore, the general procedures of Appendix K accompanied by Appendix C safety factors applied to the transient stresses will be used for the evaluation of the RCPsuction safe end. The safety factors in Appendix C are more conservative than those used in Appendix Kand are specific to piping. The suction safe end of the RCP has a 100% power normal operating temperature of approximately
[ ]a .... °F for consideration with the various operating transients.
Furthermore, the temperature value of [I ]a~c. 0F is considered to be sufficiently high and above theassumed upper shelf temperature of 200°F, which would thus result in ductile behavior of the material.
Therefore, the use of elastic plastic fracture mechanics method is appropriate for the majority of theoperating condition transients at high temperatures (above 200°F).For EPFM, the acceptance criteria are to be satisfied for each category of transients, namely, Service LoadLevel A (normal),
Level B (upset and test), Level C (emergency) and Level D (faulted) conditions.
Thereare two criteria that must be satisfied for ductile stability.
The first criterion is that the crack driving forcemust be shown to be less than the material toughness as follows:Japplied
< J0.1Where Japplied is the J-integral value calculated for the postulated flaw under the applicable Service Levelcondition and J0.1 is the J-integral characteristic of the material resistance to ductile tearing at a crackextension of 0.1 inch.WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-7The second criterion is that the flaw must also be stable under ductile crack growth as follows:aJpplied dJ material0a daat Japplied
= Jmaterial Where:Jmateria1 i -integral resistance to ductile tearing for the material0Japplied e -Partial derivative of the applied i-integral with respect to flaw depth, adJm"aterial
-Slope of the J-R curvedaMaterial Resistance J-R CurveOne of the most important pieces of information for fracture toughness for pressure vessel and pipingmaterials is the J-R (or J~n~taeiai) curve of the material.
The "J-R" stands for material resistance to crackextension, as represented by the measured J-integral value versus crack extension.
Simply put, the J-Rcurve to cracking resistance is as significant as the stress-strain curve to the load-carrying capacity and theductility of a material.
Both the J-R curve and stress-strain curves are properties of a material.
Methods are available in NUREG/CR-5729
[9] that can generate J-R curves from available data such asmaterial chemistry, radiation
- exposure, temperature, and Charpy V-notch energy. The method provided in[9] summarizes a large collection of test data, and presents a multivariable model based on advancedpattern recognition technology.
Separate analysis models and databases were developed for different material groups, including reactor pressure vessel (RPV) welds, RPV base metals, piping welds, pipingbase metals and a combined materials group. For the evaluation herein, Jmateriai curves based on pipingbase metals in NUREG/CR-5729 will be used since it is the most appropriate representation of the RCPsuction safe end material.
The material resistance, Jmnaterial, is fitted into the following equation
[8, 9]:Jmaterial
= (MF)CI1(Aa)c 2 exp [C3 (Aa)c4]Where, CI, C2, C3, and C4 are fitting constants, and Aa is crack extension.
For the piping base metalmodel, the constants C1, C2, C3, and C4 are calculated based on the a, and d1 constants from Table 13 of[9], which are defined below:lnC1l=a1 +a21nCVN+a3T+a41n B.C2 =d1 + d2lnC1l+d3In B,C3 =d4 +d5 lnC1 +d6 lnB.WCAP- 1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-8C4 =dWhere,T =Temperature
(°F)Bn = Sample thickness (inches),
conservatively taken as 1.0" per Reg. Guide 1.161 [8]CVN = Charpy impact energy (fi-Ibs)Neutron irradiation has been shown to produce embrittlement that reduces the toughness properties of thereactor vessel ferritic steel material.
The irradiation levels are very low in the RCP region and therefore the fracture toughness will not be measurably affected.
It should be noted that Margin Factors from Reg. Guide 1.161 [8] are included in the Jmaterial curve asfollows:MF =0.749 for Service Levels A, B and CME = 1.0 for Service Level DApplied J-curveFor small scale yielding, Japplied of a crack can be calculated by the Linear Elastic Fracture Mechanics method based on the crack tip stress intensity factor, K1, calculated as per Section 4.1.3. However, aplastic zone correction must be performed to account for the plastic deformation at the crack tip similar tothe approach in Regulatory Guide 1.161 [8]. The plastic deformation ahead of the crack front is thenregarded as a failed zone and the crack size is, in effect, increased.
Residual stresses are not considered in the EFPM evaluation in accordance with the document EPRI NP-6045 [10], which is the technical basis for the evaluation of flaws in ferritic piping (ASME Section XIAppendix C). According to [ 10], the residual stress can be neglected since experimental results from pipetests show no evidence of residual stress effects on maximum load carrying capacity.
Furthermore, thetechnical basis in EPRI NP-6045, Section 2-2.1, states that the conservatism included in evaluation procedures adequately account for any residual stress influence in the ductile tearing mode, and theexplicit residual stress effects need not be included in the EPFM analysis.
Additionally the technical basis for ASME Code Case N-749, PVP2012-78 190 [ 11], which provides EPFM evaluation methodology for ferritic steel components, also confirms that residual stress should not be considered in EPFMevaluations.
PVP2012-78190 states that cleavage
- failure, such as that of LEFM, is not an applicable failure mode when operating at the upper shelf, where the use of residual stresses can be overlyconservative.
Thus continuing with the evaluation procedures, the Ki-values can be converted to Japplied by the following equation:
applied-g'Where Kep is the plastic zone corrected K-value, and E'=E/(1-v
- 2) for plane strain, E = Young's Modulus,and v = Poisson's Ratio. Kep is the elastically calculated K1-value based on the plastic zone adjustedcrack depth or size. The plastic zone size, rp, is calculated byWCAP- 18051 -NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-9rp = Where, Sy, is the yield strength of the material.
It should also be noted that safety factors from C-2620 areincluded on the transient stresses used in the calculation of stress intensity factors per ASME Section XI,Appendix C. The calculation of stress intensity factors are discussed in Section 4.1.3.4.1.2.4 Primary Stress LimitIn addition to satisfying the fracture
- criteria, the primary stress limit of the ASME Code Section III,paragraph NB-3 000 must be satisfied.
The effects of a local cross-section area reduction that isequivalent to the area of the postulated flaw in the RCP suction safe end attachment weld must beconsidered by increasing the membrane stresses to reflect the reduced cross section.
Membrane stressesin a thinned area of base metal due to the crack can be treated as a local primary membrane stress with anincreased allowable stress intensity.
The typical sizing is performed on the basis of the primarymembrane stress intensity being less than Smn; however since the reduction in thickness is local, thepermissible stress intensity is increased by 50%. This procedure is in accordance to the sizing calculation performed for WCAP- 15973-P-A
[5].4.1.3 Generation of Stress Intensity FactorsSince the size of the actual indication(s) in the attachment weld was not detected at the time of the repair,a hypothetical flaw that extends radially over the entire Alloy 82/182 partial penetration weld isconservatively assumed.
Flaws are projected in the axially and circumferentially oriented directions.
Thestress intensity factor expression for two corner flaws emanating from the edge of a hole in a plate fromAnnex C.4.4 of [12] is used in determining the stress intensity factor for the postulated flaw in the Alloy82/182 partial penetration weld. The stress intensity factor can be expressed in terms of the membraneand bending stress components as follows:K1 = (Mm (OIm +- Pc) + Mb Ob) (2ta/Q)"/
2Where:am = Remote Membrane Stress Component=Remote Bending Stress Component Pc =Crack face pressureMm =Boundary Correction Factor for remote membrane
[12]Mb ---Boundary Correction Factor for remote bending [12]Q --Shape Factor per [12]a =Depth of the corner flaw (See Figure 4-1)Use of this method requires that the stresses be resolved into membrane and bending stress components.
Stresses are resolved into membrane and bending components by first fitting the stresses to a 4th orderpolynomial as shown in Annex C.2.2.3 of [12]. Reference
[12] calls for the use of remote membrane andbending stresses for use with the stress intensity factor expression due to stress concentration actingaround the hole. Only primary stresses are affected by the stress concentration of the hole, therefore WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Propdetary Class 34-10remote primary membrane and bending stresses are used from the appropriate remote paths for the axialand circumferential flaw evaluations.
Thermal transient and residual stresses from the paths at thelocation of the flaw are utilized in the calculation of stress intensity factors.The stress intensity factor expression in [12] is applicable for a range of flaw shapes, with the depth of theflaw defined as "a", and the width of the flaw defined as "c", as shown in Figure 4-1. The corner cracksreflected in the axial and circumferential orientations are demonstrated in Figure 4-2 and Figure 4-3,respectively.
The attachment weld shapes were based on the weld geometry shown in the RCP drawingsin [19c] and [19d]. The nearest structural discontinuity to the nozzle is the pump reinforcement and it isused to determine the "W" term in the stress intensity factor calculations.
The RCP suction safe endinstrumentation penetration diameter (2R) = [ ]ac~e inch according to [19d].The use of a plate model is acceptable since the lengths of the assumed flaws are small compared to thecircumference of the pipe. Similar stress intensity factor databases based on plate geometry were alsoused in the determination of stress intensity factors in WCAP-15973-P-A
[5].cFigure 4-1: Corner Crack GeometryFigure 4-2: Axial Flaw GeometryWCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-11Westinghouse Non-Proprietaiy Class 3 4-IlFigure 4-3: Circumferential Flaw GeometryWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 3 414-124.1.4 Transient Stress AnalysisIn determining the acceptability of abandoning the flawed attachment weld in the RCP suction safe end, itis essential that all applicable loadings be considered.
The first step of the evaluation is to determine thetransient loading at the location of interest and, therefore, all the applicable pressure/thermal transients forthe normal, upset, emergency,
- faulted, and test conditions must be considered.
The applicable pressure/thermal transients and the corresponding transient cycles for the RCP suction safe end arediscussed in Section 2.4. The corresponding design temperature and pressure transient curves are used indeveloping the time history through-wall pressure/thermal transient stress which is used as input to thefracture mechanics evaluation.
Transient stresses are determined based on the finite element analysis determined in Section 2, whichmodeled the area of interest in the RCP suction safe end. The model included the safe end base metal,Alloy 82/182 partial penetration weld, Alloy 600 instrumentation nozzle, Alloy 690 half-nozzle, 52Moutside surface replacement weld, and the cladding.
The safe end finite element model is shown in Figure2-19. Stress contour plots of the limiting transients are provided in Section 2.7.A total of 24 paths were used in the FEA model to extract transient
- stresses, which are shown in Figure2-19. Paths 13 through 24 are reflections of Paths 1 through 12 across the instrumentation nozzle axisand will not be used since the resulting stress is similar to Paths 1 through 12. The paths used in theevaluation contained herein are Paths 1, 2, 5, 6, 7, 8, 11, and 12. Together Paths 1-2, 5-6, 7-8, and 11-12are co-linear.
Paths 1-2 and 7-8 are at the location of the welds and Paths 5-6 and 11-12 are remote fromthe welds. Paths 3-4 and 9-10 are not used since the stress intensity factors at these locations are not aslimiting as those at Paths 1-2 and 7-8, respectively.
It should be noted that evaluation results using Paths3-4 and 9-10 were reviewed for thoroughness, and found to be not limiting.
Hoop stress from Paths 1-2and 5-6 are used for the axial flaw evaluation, and axial stress from Paths 7-8 and 11-12 are used for thecircumferential flaw evaluation.
Since the stress intensity factor definition from [12] calls for remotestresses to be used for mechanical loads, Paths 5-6 and 11-12 are used when calculating primary loadingstress intensity factors.
Paths 1-2 and 7-8 are used when calculating secondary loading (thermal transient) stress intensity factors.All of the transients for normal, upset, faulted and test conditions are evaluated for the fracture mechanics evaluation as shown in Table 2-1. The Hydrostatic Test transient is also evaluated;
- however, since PaloVerde Unit 3 is already in operation, all hydrostatic tests must be in accordance with IWB-5000 of theSection Xl ASME Code [1], which does not allow for hydrostatic tests of [ ]a~ce psia. Therefore, amaximum pressure of [ ]a'c'e psia is used in the Hydrostatic Test transient.
The Hydrostatic Testthermal transient stress is assumed to be the same as the Leak Test thermal transient stress since thetemperature variation would be the same.WCAP- 18051INP October 201!5Revision 0
Westinghouse Non-Proprietary Class 3 414-134.1.5 Welding Residual Stress AnalysisFor the fracture mechanics evaluations, the initial postulated flaws were assumed to extend completely through the depth and width of the i-groove welds and through the nickel alloy buttering.
The flawgeometry is thus conservatively considered as two corner cracks emanating from the edge of a hole inplate as shown in Figure 4-1.Based on the welding residual stresses assessment provided in Section 3.2 of WCAP-15973-P-A
[5], itwas determined that for such a hypothetical large flaw configuration as described above, the residualstresses will not be present at the tip of the crack at the interface between the weld metal and carbon steelinterface.
During fabrication, the RCP safe end material was heat-treated after the buttering and prior tocompletion of the nozzle partial penetration weld; therefore, any welding residual stresses during thefabrication would be relieved at the butter to base metal interface.
During the welding of the partialpenetration weld, several layers of weld metal are typically deposited to develop the weld geometry ofinterest, each layer, after the initial layer of weld metal has the effect of reducing the residual stresses inthe previous layers, thereby significantly reducing the residual stresses not only in the weld itself but alsoat the butter-base metal interface.
Furthermore, any remaining high stressed locations in the buttering forthe instrument nozzles will be removed by the grinding used to prepare the surface for dye penetrant inspection and for finishing the weld preparation, thus resulting in even lower stresses in the buttering.
Additionally, since residual stress is a displacement controlled load, the stresses resulting from theoriginal welding process would decrease with the introduction of a hypothetical flaw completely throughthe i-groove weld. Also, any crack growth into the carbon steel suction nozzle safe end will furtherrelieve the residual stresses.
- However, for a conservative fracture mechanics evaluation, finite element welding residual stress analysiswas performed in [13] using the Palo Verde Unit 3 specific RCP suction safe end configuration.
Thewelding residual stress evaluation utilizes a 3-dimensional model of the safe end base metal, Alloy 82/182partial penetration weld, Alloy 600 instrumentation nozzle, Alloy 690 half-nozzle, 52M outside surfacereplacement weld, and the cladding.
The welding residual stress evaluation is performed by firstmodeling the welding of the instrumentation nozzle to the RCP suction safe end. Hydrostatic testing andnormal operating conditions are then applied to the safe end before the half-nozzle repair is simulated inthe model. The Alloy 82/182 partial penetration weld is simulated with a single weld pass of buttering followed by four equal volume weld passes. The 52M repair weld is simulated with three weld passes ofroughly equal volume.A total of twelve stress paths were used to present the residual stress data. Six paths each are on the axialand radial cross-sections as shown in Figure 4-4, each path is comprised of 21 points through the wallthickness.
Paths 1, 2, 7, and 8 are utilized since these paths represent the local residual stresses at thedeepest portion of the original weld. Paths 1 and 7 extend from the inside surface through the originalattachment weld while paths 2 and 8 extend from the deepest extent of the original attachment weld,through the repair weld, to the outside surface.
Together Paths 1-2 and 7-8 are co-linear.
Paths 1-2 areused to obtain hoop welding residual stress for an axial flaw evaluation, and Paths 7-8 are used to obtainaxial welding residual stresses for a circumferential flaw evaluation (see Figure 4-4). Stresses at Paths 3-4 and 9-10 were also investigated and found to be less limiting for the calculation of stress intensity WCAP-1 8051 -N P October 2015Revision 0
Westinghouse Non-Proprietary Class 34-14Wesigos No-rpitr Cls 34factors than Paths 1-2 and 7-8, respectively.
The hoop and axial residual stress contour plots are shown inFigure 4-5 and Figure 4-6, respectively.
The hoop and axial residual stress profiles at Paths 1-2 and 7-8are shown in Figure 4-7 and Figure 4-8 respectively, and are denoted by the curve labeled "Analytical Residual Stress Profile [1 3]".The analytical welding residual stresses are used in the fatigue crack growth and the structural integrity evaluation of the final flaw size for the LEFM calculations.
- However, based on engineering experience, the analytical welding residual stress evaluation are conservative as compared to actual welding residualstresses as discussed above in this section, particularly in the original Alloy 82/182 attachment weld. Thewelding residual stresses in the region of the original attachment weld are also beyond the yield strengthof the material; therefore, it is appropriate to reduce the residual stresses to account for the plasticity ofthe material.
Also as discussed above, the residual stress is a displacement controlled load, therefore, theresidual stresses resulting from the original weld would decrease as a result of the postulation of a largeinitial flaw size and the subsequent flaw growth into the base metal. Therefore, in the LEFM analysis ofselect time steps at the beginning of heatup (time step =1 second) and end of cooldown (time steps =16664 seconds through 36000 seconds) where the fluid temperature is 70*F, the analytical weldingresidual stresses are reduced in the original attachment weld as shown in Figure 4-7 and Figure 4-8 toreduce over-conservatism.
It is noted that the welding residual stresses are only reduced in the originalAlloy 82/182 attachment weld, and the residual stresses through the remaining wall thickness areconservatively left unaffected.
The reduced residual stress profile is used in only the LEFM fracturemechanics evaluation, and only at the select time steps mentioned above, to reduce conservatism in thewelding residual stress profile through the original Alloy 82/182 attachment weld. The fatigue crackgrowth evaluation and all other time steps of the LEFM analysis are based on the full analytical residualstress profiles from Figure 4-7 and Figure 4-8.WCAP- 18051I-NP October 2015Revision 0
WestinRhouse Non-Proprietary Class 34-15Westinghouse Non-Proprietary Class 3 4-15Figure 4-4: Residual Stress Evaluation Cut Paths 1131(Viewed at 45° Angle to Axial Cut Plane)WCAP- ! 805 I-NPOctober 2015Revision 0
v ._4-16Westinghouse Non-Proprietary Class 3 4-16-ia,c,eFigure 4-5: Residual Hoop Stress Results (psi) [13]WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 414-17a,c,eFigure 4-6: Residual Axial Stress Results (psi) [13]WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 414-18a,c,eFigure 4-7: Through-Wall Welding Residual Hoop Stress Profile [13]* Note that the residual stresses shown are through the entire wall thickness including the originalattachment weld and the repair weld. Residual stresses beyond the original attachment weld areconservatively equal to the unreduced analytical residual stress profile [113].WCAP- 1805 1-NPOctober 201l5Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 4-19a~ceFigure 4-8: Through-Wall Welding Residual Axial Stress Profile [13]* Note that the residual stresses shown are through the entire wall thickness including the originalattachment weld and the repair weld. Residual stresses beyond the original attachment weld areconservatively equal to the unreduced analytical residual stress profile [1 3].WCAP-1805 I-NP October 2015WCAP-18051-NP Revision 0
Westinghouse Non-Proprietary Class 3 424-204.2 FRACTURE MECHANICS EVALUATION RESULTSA fracture mechanics evaluation is performed to demonstrate structural integrity of the RCP suctionnozzle safe end with the flawed partial penetration weld for 40 years of plant operation.
First a crackgrowth evaluation is performed for hypothetical initial flaws encompassing the entire radial extent of theabandoned partial penetration weld for growth into the RCP suction nozzle safe end due to the fatiguecrack growth mechanism.
Flaws are projected in the axially and circumferentially oriented directions forevaluation.
The allowable flaw size criteria of Section XI, Appendix C of the ASME Code are then usedto demonstrate that the final flaw sizes after 40 years of crack growth continue to meet the ASME Codemargins.
The results of the fatigue crack growth and structural integrity analysis are provided in Section4.2.1 and 4.2.2 below based on the methodology discussed in Section 4.1.4.2.1 Fatigue Crack Growth Evaluation A fatigue crack growth analysis is performed according to the methodology in Section 4.1.1 to determnine the final depth that the hypothetical postulated flaw in the RCP suction safe end instrumentation nozzlepartial penetration weld would grow to after 40 years of operation.
An operation duration of 40 yearsconservatively envelops the remaining operating life for Palo Verde Unit 3, including the LicenseRenewal period.Stress intensity factors based on a double corner cracked hole in a plate are first calculated for a range offlaw sizes based on primary, secondary, and residual stresses in the region of the attachment weld. Sincethere was leakage detected on the outside surface on the RCP suction safe end, the evaluation contained herein assumed that the initial flaw size radially encompasses the entire original attachment weld.Therefore, the initial postulated flaw will have a depth which extends through the Alloy 82/182 partialpenetration weld to the base metal interface and a length equal to the width of the original weld prep.Flaws are projected in the axially and circumferentially oriented directions for evaluation and therespective stresses normal to the crack plane are used in the analysis.
Crack growth is determined for thisinitial flaw due to the fatigue crack growth mechanism for a total of 40 years into the safe end base metal.The final flaw size with FCG will then be used to determine structural stability based on ASME SectionXl, Appendix C.In accordance with the stress intensity factors database for a double comer cracked hole in a plate, remoteprimary stresses are used in the calculation of the stress intensity factors to account for stressconcentration around the penetration.
Therefore, for the axial flaw projection, remote stresses at Paths 5-6 (Figure 2-19) of the transient stress model are used in the calculation of primary stress intensity factors.Similarly, for the circumferential flaw projection, remote stresses at Paths 11-12 (Figure 2-19) of thetransient stress model are used in the calculation of primary stress intensity factors.
Alternately, the stressintensity factor calculations for secondary and residual stresses utilized stresses at the location of theassumed flaw (Paths 1-2 for axial flaw and Paths 7-8 for circumferential flaw from Figure 2-19 andFigure 4-4).The stress intensity factors used to calculate crack growth are determined at both the deepest point in thecrack ($ = 90°) and the surface point of the crack ($ 00), and the limiting of the two are used todetermine the final flaw size. In the FCG evaluation, the flaw depth to flaw width ratio is held constantWCAP- 1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-21through the crack growth calculation.
The complete design cycles from Table 2-1 are conservatively usedin the EGG evaluation, even though the license renewal application demonstrates that the expected cyclesfor Palo Verde are projected to be less than the full count of the design cycles [14].The crack growth results are shown in Table 4-2 for the axial and circumferential flaw configurations.
The final flaw sizes after 40 years of operation are then used to determine the acceptability of continued operation of the Palo Verde Unit 3 RCP suction safe end as discussed in 4.2.2 below.Table 4-2: Fatigue Crack Growth ResultsFlaw Initial Flaw Flaw Depth Including FCGConfiguration Depth 10 Years 20 Years 30 Years 40 Years(in.) (in.) (in.) (in.) (in.)Axial Flaw [Circumferential Flaw ] a,c,e4.2.2 Final Flaw Stability Evaluation 4.2.2.1 Screening CriteriaArticle C-4220 of the ASME Section XI Code defines the procedure used in the determination of failuremode and the analysis method. In accordance with Figure C-4220-1 in the ASME Section Xl Code, theAppendix C screening computations are used to determine the appropriate ferritic piping analysis methodusing limit load, EPFM, or LEFM methodologies.
The screening criteria (SC) are particularly important when metal temperatures are below the upper shelf of the Charpy Energy curve. Based on Article C-8000of the ASME Section XI Code, in the absence of material specific data, an upper shelf temperature of200°F shall be conservatively used. Therefore the screening criteria are used for all transients whichexperience transient temperatures below 2000F to determine the appropriate failure mode and analysismethod. Once a transient experiences temperature above the upper shelf, the evaluation will beperformed with respect to the EPFM methodology since the ferritic safe end would be at the upper shelfof the Charpy Energy curve and have sufficient ductility where structural stability can be determined based on EPFM.The only Palo Verde Unit 3 transients that experience temperatures below 200°F are Heatup, Cooldown, Hydrostatic Test, and Leak Test. According to the piping design specification
[23], at the beginning of theHeatup transient and at the end of the Cooldown transient, the temperature is [ ]a~ce 0F and the pressureis [ ja'c'e psia. However, based on the Palo Verde Pressure-Temperature Limits in the Technical Requirements Manual [15], the maximum pressure at the beginning of Heatup or end of Cooldown islimited to [ ]a~ce psia. Therefore, for the beginning of Heatup or end of Cooldown a maximum pressureof [ ]a,c,e psia is used in the screening evaluation.
For all instances of the Heatup, Cooldown, Hydrostatic Test, and Leak Test transients where the transient temperature is below 200°F, the ASME Section XI Article C-4000 screening criteria resulted in valuesgreater than SC = 1.8 based on the calculations described in Section 4.1.2.1I.
Therefore, the more limitingWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-22LEFM methodology will be used in determining the acceptability of the final flaw size for all instances ofthe Heatup, Cooldown, Hydrostatic Test, and Leak Test transients where the transient temperature isbelow the assumed Charpy upper shelf temperature (200°F).
The screening criteria results for the mostlimiting time steps of each transient are shown in Table 4-3.Table 4-3: Screening Criteria Results for Limiting Transient Time StepsTransient Limiting Time Step Axial Flaw Circumferential Flaw(sec.) SC SCHeatup 3600 2.2 4.0Cooldown 13680 2.2 3.4Leak Test 61200 4.3 8.3Hydrostatic Test 61200 4.0 7.64.2.2.2 Linear Elastic Fracture Mechanics As discussed above, the LEFM methodology is used to evaluate transients that operate below the assumedCharpy upper shelf temperature of 200°F, which are notably Heatup, Cooldown, Hydrostatic Test, andLeak Test. The final flaw sizes after 40 years of FCG, as determined in Table 4-2, are then evaluated todetermine acceptability based on the LEFM procedure of Section 4.1.2.2.Stress intensity factors are determined using the primary and secondary transient stresses and weldingresidual stresses as discussed in Sections 4.1.4 and 4.1.5. The stress intensity factor database based on adouble corner crack in a plate with a hole is used as discussed in Section 4.1.3.Also as discussed above in Section 4.2.2.1, for the LEFM evaluation at the beginning of Heatup and at theend of Cooldown, a maximum pressure of [ ] a°c* psia is used in determining the stress intensity factorfor the primary pressure loading.The RCP design specification in [22] shows the Hydrostatic and Leak Test transient reaching atemperature as low as [ ]aca 0F while the pressure is still elevated
([ ]a~c# psia for Hydrostatic and[ ]ace psia for Leak Test). According to the Palo Verde Pressure-Temperature Limits in the Technical Requirements Manual [151, the pressure of the Hydrostatic/Leak Test transient may not increase above[ ]"c... psia unless the temperature is above [ ]ae ....F. For the pressure in the Hydrostatic/Leak Testtransients to be [ ]a'c'e psia the temperature would have to be greater than [ ]a'c'e 0F.Therefore, for Hydrostatic and Leak Test transients, when the pressure is greater than [ ]a"c¢e psia, atemperature of [ 0F is used in the LEFM evaluation.
For the evaluation of axial flaw, LEFM calculations were performed for a flaw depth of [ ]a,c,e in.,which is the predicted final flaw depth after 40 years of fatigue crack growth from Table 4-2. A LEFMfracture mechanics evaluation was performed for all Heatup, Cooldown, Hydrostatic Test, and Leak Testtransient time steps with a temperature below 200°F and the most limiting results for each transient areshown in Table 4-4. The safety factors from paragraph C-2622 for axial flaws are included on the stressWCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-23intensity factors due to primary transient stress intensity factors per Appendix C-7000 of the ASMESection XI Code. There are no safety factors applied to the residual stress intensity factors according toAppendix C-7000 of the ASME Section XI Code.For the circumferential flaw evaluation, LEFM calculations were performed for a flaw depth of [ ]a..in., which is the predicted final flaw depth after 40 years of fatigue crack growth from Table 4-2. ALEFM fracture mechanics evaluation was performed for all Heatup, Cooldown, Hydrostatic Test, andLeak Test transient time steps with a temperature below 2000F and the most limiting results for eachtransient are shown in Table 4-5. The safety factors from paragraph C-2621I for circumferential flaws areincluded on the stress intensity factors due to primary and secondary transient stress intensity factors perAppendix C-7000 of the ASME Section XI Code. There are no safety factors applied to the residualstress intensity factor according to Appendix C-7000 of the ASME Section XI Code.The results in Table 4-4 and Table 4-5 are based on stress intensity factors from the deepest extent of theflaw. The results based on stress intensity factors at the deepest extent of the flaw were found to be morelimiting than those at the surface point of the flaw. Based on the structural integrity results for axial andcircumferential flaws in Table 4-4 and Table 4-5, the final flaw sizes after 40 years of crack growth areacceptable for continued operation based on the LEFM evaluation.
WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-24Table 4-4: LEFM Results for Axial Flaw____(Flaw Depth= ]a .... in.)Transient Time Temp K1p Ki Klr KItotai ~ Kltotal / KIc(sec.) (0F) (ksi'lin)
(ksi~in)
(ksi'lin)
(ksi'in)
Heatup 1ICooldown 16664Leak Test 63000Hydro Test 63000 ]ac~eeTable 4-5: LEFM Results for Circumferential FlawFlw eth = [ ]a~c~e in.) ______Transient Time Temp Kipm Kipb KIsm KIsh Kir KItotal Kit Kitotai / K1c(sec.) (0F)
(ksi~in)
(ksi'Iin)
(ksi'Iin)
(ksi'iin)
(ksi'Iin)
Heatup 1 ICooldown 16664Leak Test 63000Hydro Test 63000 ] a,c,eWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class34-254.2.2.3 Elastic Plastic Fracture Mechanics Based on the Screening Criteria discussed in Section 4.2.2.1 all transients that operate above the Charpyupper shelf temperature of 200°F are evaluated using the EPFM methodology discussed in Section4.1.2.3.For the J-integral calculation, the key aspects of the analysis is to demonstrate that the magnitude of Jappliedis less than Jmater-ial at 0.1 inch crack extension, and the slope of the imateria curve is greater than the slope ofthe Japplied curve at the intersection of the Jmaterial and Japplied curves. In order to determine the Japplied curve,the stress intensity factor, KI, must be calculated based on the procedure shown in Section 4.1.3 for adouble comer crack geometry for the applicable attachment weld geometry.
The most severe transients were evaluated since they will provide the highest combination of bending andmembrane stresses from all transient time steps, which results in a limiting Jappliecd curve. Additionally, theJmaterial curves decrease at higher temperatures so transients with severe stress at higher temperatures would be limiting.
Step Load Increase, Reactor Trip, and Loss of Secondary Pressure were selected sincethey were determined to result in the most limiting stress intensity factors for Normal, Upset, and Faultedconditions.
It should be noted that all transients were considered in the EPFM evaluation.
In accordance with the stress intensity database from Section 4.1.3, remote membrane and bendingstresses are used in the stress intensity factor calculations for primary stress to account for the influence ofthe stress discontinuity of the penetration hole near the stress cut. Secondary thermal transient stressesfrom path locations near the flaw are used in the stress intensity factor calculations.
Residual stresses arenot considered in the EFPM evaluation in accordance with the EPRI NP-6045 [10] and as discussed inSection 4.1.2.3.Safety factors from Paragraphs C-2621 and C-2622 of the ASME Section XI Code, as shown in Table 4-1,are included in the stress intensity factors used in the EPFM evaluation.
The safety factors are included inboth the primary and secondary stress intensity factors used in the calculation of Japplied-The EPFMevaluation was performed for the deepest extent of the flaw since it was determined that the stressintensity factors at the deepest extent were more limiting than those at the surface point of the flaw.The Jmaterial is determined based on the methodology in Section 4.1.2.3 from Reg. Guide 1.161 [8] andNUREG/CR-5729
[9]. For a conservative
- analysis, the CVN value used in the calculation of imateria1 is thelowest of the six Charpy Impact tests from the CMTR at l00*F ([ ]a~'~ ft.-lbs.).
The RCP suction safeend CMTR does not provide sufficient data to generate the full Charpy Energy curve; therefore, it isconservatively assumed that the CVN values at a test temperature of 1 00*F represent the upper shelf eventhough the upper shelf temperature is not known and would be higher. The material resistance i-value,Jmaterial, is calculated using the maximum temperature from each transient.
The higher temperature leads toa more limiting Jmaterial curve. The thickness of the safe end base metal is [ ]a~C, inches; however, aconservative value of Bn 1.0 inch is used to be consistent with the Reg. Guide 1.161 [8]. Based onReg. Guide 1.161, an MF =0.749 is used for Levels A and B transients and an MF = 1.0 is used for LevelD transients.
Young's Modulus, E, and yield strength are from ASME Section III material properties forSA-508, Class 1 at the maximum transient temperature.
WCAP-1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-26Once the Japplied and Jmaterial are calculated, flaw stability is determined based on the J-R curves for the PaloVerde Unit 3 RCP suction safe end material as shown in Figure 4-9 through Figure 4-14 and Table 4-6.These results represent the most limiting transients for each service condition for both axial andcircumferential flaw orientations.
Based on the J-R curves, at a crack extension of 0.1 in., the Jmaterial curve is greater than the Japplied curve for all transients.
Additionally, at the point of intersection betweenthe Japplied curve and Jmaterial curve, the slope of the imaterial curve is greater than the slope of the Japplied curve.Therefore, the final flaw sizes after 40 years of crack growth are acceptable for continued operation basedon the EPFM evaluation.
Table 4-6: EPFM Results for Axial and Circumferential Flaws at 0.1" Crack Extension Axial Flaw Circumferential FlawTransient J]applied Jmaterial Japplied Jmaterial
_________________
(kip-in/in
- 2) (kip-in/in
- 2) (kip-in/in
- 2) (kip-in/in 2)Step Load Increase
[_____Reactor TripLoss of Secondary Pressure
]_____ a,c,e-Ia,c,eFigure 4-9: EPFM Evaluation Results for Axial Flaw -Step Load Increase Transient (Normal Condition
-Level A)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-27Westinghouse Non-Proprietary Class 3 4-27a,c,eFigure 4-10: EPFM Evaluation Results for Axial Flaw -Reactor Trip Transient (Upset Condition
-Level B)WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-28_aceeFigure 4-11: EPFM Evaluation Results for Axial Flaw -Loss of Secondary PressureTransient (Faulted Condition
-Level D)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-29Westinghouse Non-Proprietary Class 3 4-29a,c,eFigure 4-12: EPFM Evaluation Results for Circumferential Flaw -Step Load IncreaseTransient (Normal Condition
-Level A)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-30Westinghouse Non-Proprietary Class 3 4-30a,c,eFigure 4-13: EPFM Evaluation Results for Circumferential Flaw -Reactor Trip Transient (Upset Condition
-Level B)WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-31Westinghouse Non-Proprietary Class 3 4-31a,c,eFigure 4-14: EPFM Evaluation Results for Circumferential Flaw -Loss of Secondary Pressure Transient (Faulted Condition
-Level D)WCAP- 18051 -NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 434-324.2.2.4 Primary Stress LimitThe primary stress calculation is shown in Table 4-7 based on the calculation procedure in ASMLE CodeSection III, paragraph NB-3000 [2]. The typical sizing is performed on the basis of the primarymembrane stress intensity being less than Sm, however since the reduction in thickness is local theallowable stress intensity, Sm, is increased by 50%. This procedure is similar to the sizing calculation performed for WCAP-15973-P-A
[5]1.The largest flaw size after crack growth for either the axial or circumferential flaw is used in the primarystress limit evaluation to envelop all results.
It should be noted that the final flaw depths shown in Table4-2 include the cladding thickness which must be disregarded in the primary stress limit calculation.
Therefore, the cladding thickness is subtracted from the flaw depth to represent the depth into the basemetal only. As shown in Table 4-7 the limiting final flaw depth is acceptable with respect to the primarystress limit._________
Table 4-7: Palo Verde Unit 3 RCP Suction Safe End Primr Sress Limit ______Outside Total Flaw Flaw Depth into Remaining Base Hoop Radial Stress 1.5"SmRadius Depth"L)
Base Metal(2) Metal Thickness Stress Stress Intensity (in.) (in.) (in.) (in.) (ksi) (ksi) (ksi) (ksi)a]~Notes:(1) Final flaw depth from Table 4-2 for either axial or circumferential flaw.(2) Thickness of base metal only, without cladding.
WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class34-334.2.3 Corrosion A general corrosion assessment of the nozzle bore diameter was performed in [16] for the half-nozzle repair one-cycle evaluation.
The assessment in [16] determined the allowable increase in the diameter ofthe carbon steel safe end attachment nozzle bore due to corrosion of the pipe base metal would be at least[ ]a,c,e inches. The allowable diametrical hole increase of [ ]a .... inches was therefore compared tothe corrosion growth of the bore hole calculated for 40 years.The corrosion rate for a carbon steel material (such as that of SA-508, Class 1) for the Palo Verde Unit 3RCP suction safe end is provided in [5]. The corrosion rate in [5], applicable to the half-nozzle creviceregion, is provided for three separate operating conditions:
full power operation, startup mode (assumedto be at intermediate temperature with aerated primary coolant),
and refueling mode (100°F with aeratedprimary coolant).
Arizona Public Service has committed to track the time at cold shutdown in theprevious relief requests for hot leg Alloy 600 small-bore nozzle repairs in order to provide assurance thatthe allowable hole diameter is not exceeded over the life of the plant [ 16].An overall corrosion rate was then determined based on the corrosion rates of the individual operating modes and the percentage of time spent in each mode. The calculated corrosion rate for Palo Verde Unit3 was determined to be 1.53 mils per year (mpy) [16]. For a conservative operation period of 40 years,the total corrosion of the nozzle bore would be:Corrosion
=(1.53 mpy)(40 years) = (0.00153 in/yr)(40 yrs)= 0.06 12 inches (radially, relative to penetration)
-- 0.1224 inches (diametrically, relative to penetration)
Since the expected corrosion in 40 years is only 0.1224 inches diametrically, the diameter of the borewould remain acceptable for the next 40 years of operation.
WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class34-344.3 FRACTURE MECHANICS SUMMARY AND CONCLUSIONS A fracture mechanics evaluation is performed to provide the technical basis for continued operation of thePalo Verde Unit 3 RCP suction safe end with a flawed instrumentation nozzle attachment weld. Flawgrowth and stability evaluations were performed based on ASME Section Xl to determine theacceptability of performing a half-nozzle repair and abandoning the flawed attachment weld for 40 yearsof plant operation.
Acceptability of a flaw can be determined by first determining the amount of growththe hypothetical flaw would experience for the remaining life of the plant (40 years) and then verifying that the final flaw size after 40 years meets the acceptance criteria of ASME Section XI, Appendix C forferritic piping.Since the flawed location has not been inspected, the initial flaw size is conservatively assumed to be theentire radial extent of the partial penetration weld, which would expose the RCP suction safe end basemetal to the reactor coolant environment.
Flaw growth of this initial flaw size is performed for the RCPsuction nozzle safe end due to the fatigue crack growth mechanism.
The purpose of the flaw growthevaluation is to determine the growth of hypothetical postulated axial and circumferentially oriented flawsinto the safe end base metal for a service life of 40 years. The allowable flaw size criteria of Section XI,Appendix C of the ASME Code are then used to demonstrate that the growth of the flaw in the originalpartial penetration weld into the safe end base metal remains acceptable for the remaining life of the plant.The flaw growth evaluation is performed in Section 4.2.1 for axially and circumferentially orientedpostulated flaws encompassing the original attachment weld. Flaw stability calculations are performed inSection 4.2.2 and demonstrate that the final flaw size from the flaw growth evaluation is acceptable according to the standards of the ASME Code. Based on the evaluation in Section 4.2, the final flaw sizeafter 40 years of fatigue crack growth meets the ASME Section XI, Appendix C acceptance criteria.
An additional evaluation is contained in Section 4.2.3 of this calculation note which determines theacceptable life of the repair weld considering corrosion to the safe end base material which wouldincrease the diameter of the attachment nozzle bore. This evaluation determined that it would take longerthan 40 years for the hole to reach an unacceptable size due to corrosion in the region.Since Palo Verde Unit 3 has less than 40 years of operation remaining, it is therefore technically justifiable to continue operation for the remaining life of the plant with a flawed attachment weld presentin the RCP suction safe end, since the acceptance criteria of ASME Section XI have been met.WCAP-1 8051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 35-5-15 LOOSE PARTS EVALUATION Because the half-nozzle repair process involves leaving a small remnant of the nozzle inside the existingpenetration, the possibility that fragments of the existing partial penetration weld could come loose insidethe RCS through the current planned end of plant life, which is 60 years, is evaluated.
It is postulated, based on NDE performed to describe the flaws, that the crack(s) on the nozzle and/or weld are part-through-wall in the axial direction with no evidence of circumferential cracks. This is consistent with theorientation previously observed by APS for this type of degradation mechanism (i.e., PWSCC) ininstrument nozzles in the hot leg.The remnant Alloy 600 instrument nozzle (approximately 1.5 inches in length) is recessed inside the safeend bore. It remains constrained by a relatively tight radial clearance between the bore and the nozzle.For the half-nozzle repair to create a loose part, it would require continued degradation at the remaining portion of the original Alloy 600 nozzle and at the nozzle-to-casting J-weld wetted surface.Embrittlement, corrosion and wastage,
- fatigue, and stress corrosion cracking were considered as potential material degradation mechanisms.
Based on a review of these degradation mechanisms, only PWSCCwas identified as a potential active mechanism for material degradation that could potentially give rise tothe production of loose parts. However, based on the tortuous, tight array of cracking created byPWSCC, as well as the fact that any non-adhered sections of material would be constrained from releaseby the surrounding
- material, it has been determined that continuation of PWSCC processes in the remnantAlloy 600 nozzle and i-weld is unlikely to result in liberation of loose material from the remaining in-place nozzle structure.
- However, although it has been concluded that it is very unlikely that a loose part will be released from theAlloy 600 nozzle and/or J-weld, this evaluation conservatively addresses the possibility that one or morefragments of the existing partial penetration weld separates from the nozzle and weld butter and becomesa loose part inside the RCS. Based on this assumption, a conservatively sized fragment of weld wasassumed to weigh approximately 0.1 pounds and have dimensions no greater than the partial penetration weld thickness at its cross-section, and a length ofone-quarter of the circumference around the instrument nozzle.Therefore, the structural and functional impacts of the loose weld fragment(s) on affected systems,structures, and components (SSCs) were evaluated.
Engineering judgments were applied and priorPVNGS loose parts evaluation results were taken into consideration.
The evaluation considered thatalthough the aforementioned fragment represents one possible form of the loose part, it is possible thatsmaller fragments of different sizes, shapes, and weights could be released, or created.
Additional smallerfragments are possible, for example, if a weld fragment was to make contact with a high-velocity RCPimpeller blade, or perhaps make high-speed contact witha the core support barrel.The evaluation concluded that the postulated loose parts will have no adverse impact on the RCS andconnected SSCs through the current planned end of plant life. The evaluation addressed potential impactsto various SSCs where the loose parts might travel. This included the RCPs, the main coolant piping, thereactor vessel and its intemnals, the fuel, the pressurizer, steam generators, as well as other systemsattached to the RCS, including the spent fuel pool. It was determined that all impacted SSCs wouldcontinue to be capable of satisfying their design functions.
WCAP- 18051 -NP October 2015Revision 0
Westinghouse Non-Proprietary Class 36-6-16 SUMMARY AND CONCLUSION The purpose of this report is to demonstrate the acceptability of the half-nozzle repair for the flawed RCPsuction safe end instrument nozzle at Palo Verde Unit 3. A 3-D finite element model is used to evaluateASME Section III stresses and generate transient stress inputs for the fracture mechanics evaluation.
Thefinite element model conservatively accounts for potential corrosion of the replacement J-groove weldapplied for the half-nozzle repair.Transient stresses and welding residual stresses were calculated using finite element methods and thestresses were used in the fracture mechanics evaluation.
The fracture mechanics evaluation is performed in accordance with ASME Section XI and concludes that it is technically justifiable for Palo Verde Unit 3to continue operation for the remaining life of the plant with a flawed attachment weld present in the RCPsuction safe end.The loose parts evaluation concluded that the postulated loose parts will have no adverse impact on theRCS and connected SSCs through the current planned end of plant life. It was determined that allimpacted SSCs would continue to be capable of satisfying their design functions.
In conclusion, the half-nozzle repair implemented on the RCP Suction nozzle pressure instrumentation nozzle at PVNGS Unit 3 is acceptable and meets all applicable ASME Section III and Section XI criteriafor the remaining life of the plant.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 37-7-17 REFERENCES
- 1. ASME Boiler and Pressure Vessel Code,Section XI, 2001 Edition with 2003 Addenda.2. ASME Boiler and Pressure Vessel Code,Section III, 1974 Edition.3. ASME Boiler and Pressure Vessel Code, Section 11 and Section III, 1998 Edition up to and Including 2000 Addenda.4. ASME Boiler and Pressure Vessel Code,Section II, 2013 Edition.5. Westinghouse Report, WCAP-15973-P-A, Rev. 0, "Low-Alloy Steel Component Corrosion AnalysisSupporting Small-Diameter Alloy 600/690 Nozzle Repair/Replacement Programs,"
February 2005.(Westinghouse Proprietary Class 2)6. APS Letter, "Palo Verde Nuclear Generating Station (PVNGS) Units 1, 2, 3, Docket No. STN 50-528/529/530, 10 CFR 50.55a(a)(3)(i)
Alternative Repair Request for Reactor Coolant System HotLeg Alloy 600 Small-Bore Nozzles (Relief Request 31, Revision 1)." August 16, 2005. (MLAccession No. ML052550368)
- 7. NRC Letter, "Palo Verde Nuclear Generating
- Station, Units 1, 2, and 3 -Relief Request No. 31,Revision 1, Re: Proposed Alternative Repair for Reactor Coolant System Hot-Leg Alloy 600 Small-Bore Nozzles (TAC Nos. MC9 159, MC9 160, and MC9161I).
(ML Accession No. ML062300333)
- 8. Regulatory Guide 1.161, "Evaluation of Reactor Pressure Vessel with Charpy Upper-Shelf EnergyLess Than 50 ft-lb."9. E. D. Eason, J. E. Wright, E. E. Nelson, "Multivariable Modeling of Pressure Vessel and Piping J-RData," NUREG/CR-5729, MCS 910401, RF, R5, May 1991.10. Evaluation of Flaws in Ferritic Piping. Electric Power Research Institute, Palo Alto, CA: October1988. EPRI NP-6045.11. Proceedings of the ASME 2012 Pressure Vessel & Piping Conference, PVP2012-78190, "Alternative Acceptance Criteria for Flaws in Ferritic Steel Components Operating in the Upper ShelfTemperature Range."12. American Petroleum Institute, API 579-1/ASME FFS-i (API 579 Second Edition),
"Fitness-For-Service,"
June 2007.13. Dominion Engineering, Inc. Calculation C-8006-00-0 1, Rev. 0, "Palo Verde Reactor Coolant PumpInstrumentation Nozzle Repair Welding Residual Stress Analysis."
- 14. License Renewal Application, Palo Verde Nuclear Generating Station Unit 1, Unit 2, and Unit 3,Facility Operating License Nos. NPF-41, NPF-51, and NPF-74, Supplement 1, April 10, 2009.15. Palo Verde Units 1, 2, and 3 Technical Requirements Manual, Rev. 62, November, 2014.16. Westinghouse Report, DAR-MRCDA-15-6, Rev. 1, "Palo Verde Unit 3 RCS Cold Leg Alloy 600Small Bore Nozzle Repair,"
April 2015. (Westinghouse Proprietary Class 2).17. Westinghouse Letter, LTR-ME-15-65, Rev. 0, "ASME Code Section XI Reconciliation for ArizonaPublic Service (APS), Palo Verde Nuclear Generating Station (PVNGS) Unit 3 Replacement Instrument Nozzle,"
September 21, 2015.WCAP- 1805 I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 37-7-218. Westinghouse Letter, LTR-SST-10-58, Rev. 2, "ANSYS 12.1 Release Letter,"
October 2, 2012.19. Drawings(a) CE-KSB Pump Co. Inc. Drawing, C-8000-101-2017, Rev. 02, "Wall Static Pressure NozzleSuction."
(b) CE-KSB Pump Co. Inc. Drawing, E-81 11-101-2002, Rev. 00, "Pump Casing -A."(c) CE Avery Drawing, STD-009-0009, Rev. 02, "Coolant Pumps Weld Joint Identification andFabrication Requirements."
(d) CE Avery Drawing, 339-0054, Rev. 00, "Safe End Mach. of Pressure Tap Holes & Weld Prep.(Suction)."
(e) Westinghouse
- Drawing, C-14473-220-002, Rev. 0, "Replacement Pressure Tap Nozzle."(f) Westinghouse
- Drawing, E-14473-220-001, Rev. 0, "Pump Casing -A Pressure Tap NozzleModification Assembly."
(g) Combustion Engineering
- Drawing, E-65473-771-001, Rev. 00, "General Arrangement ArizonaPublic Service III Piping."20. CE-KSB Pump Co. Inc. MDL, MDL 8111-101-202, Rev. 00, "Material and Drawing List for PumpCasing 'A'," June 22, 1983.21. CE-KSB Pump Co. Inc. MDL, 8000-101-217, Rev. 02, "Material and Drawing List for StaticPressure Nozzle -Suction,"
August 9, 1982.22. Combustion Engineering Specification, SYS80-PE-480, Rev. 02, "Specification for Standard Plantfor Reactor Coolant Pumps," May 10, 1978.23. Combustion Engineering Specification, 00000-PE-140, Rev. 04, "General Specification for ReactorCoolant Pipe and Fittings,"
May 25, 1977.24. Palo Verde Nuclear Generating Station Engineering Evaluation,
- 4642529, May 1, 2015.25. ASME Standard, ASME OM3-1982, "Requirements for Preoperational and Initial Start-up Vibration Testing of Nuclear Power Plant Piping Systems,"
September 30, 1982.26. Westinghouse Design Specification, 14273-PE-140, Rev. 15, "Project Specification for ReactorCoolant Piping and Fittings for Arizona Nuclear Power Project,"
June 25, 2007.27. PVNGS Engineering Calculation, 13-MC-RC-503, Rev. 9, "RCS -RCP Pressure Differential System,"
November 16, 2010.28. Palo Verde Nuclear Generating Station Specification, 13-PN-0204, Rev. 21, "Fabrication andInstallation of Nuclear Piping Systems for the Arizona Public Company Palo Verde NuclearGenerating Station Unit 1, 2 and 3," May 2, 2014.29. American National
- Standard, ANSI B16.11I -1973, "Forged Steel Fittings, Socket-Welding andThreaded,"
ASME, New York, NY, 1973.30. NRC Letter, "Palo Verde Nuclear Generating
- Station, Unit 2 Relief Request No. 31 RE: ProposedAlternative Repair for Reactor Coolant System Hot Leg Alloy 600 Small-Bore Nozzles (TAC No.MC6500),"
May 5, 2005. (ML Accession No. ML051290123)
WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 37-3Wetngos No-rpieayCas w-31. APS Letter, "Palo Verde Nuclear Generating Station (PVNGS) Unit 2 Docket No. STN 50-529 10CFR 50.5 5a(a)(3)(i)
Alternative Repair Request for Reactor Coolant System Hot Leg Alloy 600Small-Bore Nozzles (Relief Request 31)," March 25, 2005. (ML Accession No. ML050950358)
WCAP- 1805 1-NP Otbr21Revision 0
Westinghouse Non-Proprietary Class 3A-1APPENDIX A: ASME STRESS PATH LOCATIONS The figures in this appendix show the path locations for the maximum stresses reported in Section 3.2.-Von Mises plots of limiting stresses for the normal and upset conditions are also included.
Each figure inthis appendix shows a sliced view of the model to show the path location or stress results of interest.
Theterm "cut" is used in the figures to denote a stress evaluation path.A.1 RCP SUCTION NOZZLE SAFE END LIMITING PATHSFigure A-i: Path Location 6a,c,eWCAP-18051-NP October 2015WCAP- 1805 I-NPRevision 0
Westinghouse Non-Proprietary Class 3A-A-2__ a,c,eFigure A-2: Path Location 1Note: The view shown is a slice of the RCP safe end with the top half removed.
Path 1 is a radial pathfrom the inside surface of the safe end to the outside of the safe end along the length of the instrumentation nozzle. The first point in the path is coincident with the remnant nozzle weld. The end point is coincident with the replacement nozzle weld.WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-A-3-- a~ceFigure A-3: von Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A4A-4-ia,c,eFigure A-4: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NP October 2015Revision 0
A.2Westinghouse Non-Proprietary Class 3REPLACEMENT NOZZLE LIMITING PATHSFigure A-5: Path Location 61A-5fla,c,eWCAP- 18051 -NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 A-6-- a,c,eFigure A-6: Path Locations 58 and 60__ a,c,eFigure A-7: yon Mises Stresses
-Cooldown Transient at Step 4, Time 10,800 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-7West in2house Non-Proprietary Class 3 A-7__ a~ceFigure A-8: von Mises Stresses
-Upset Transient at Step 5, Time 62.89 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A.3 ATTACHMENT WELD LIMITING PATHSFigure A-9: Path Location 26A-8a~c,eWCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-9Westinghouse Non-Proprietary Class 3 A-9a,c,eFigure A-10: Path Location 31a~ceFigure A-11: Path Location 39WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-10Westinghouse Non-Proprietary Class 3 A- 10-ia~c,eFigure A-12: Path Location 27Figure A-13: Path Location 19a,c,eWCAP-1805 1-NP October 2015WCAP- 18051-NPRevision 0
Westinghouse Non-Proprietary Class 3 AiA-11-- a,c,eFigure A-14: Path Location 35WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-12Westinghouse Non-Proprietary Class 3 A- 12-- a,c,eFigure A-15: yon Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 Seconds withCutout at Path 39Note: Stress displayed in the above figure is in units of psi.WCAP- 18051-NP October 2015WCAP- 18051-NPRevision 0
fWestinghouse Non-Proprietary Class 3A-13Westinghouse Non-Proprietary Class 3 A-13-- a,c,eFigure A-16: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 Secondswith Cutout at Path 39Note: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Enclosure Relief Request 54 Proposed Alternative in Accordance with 10 CFR 50.55a(z)(1)
ATTACHMENT IPalo Verde Nuclear Generating Station Unit 3 Reactor Coolant Pump 2A Suction SafeEnd Instrumentation Nozzle Half-Nozzle Repair Evaluation, WCAP-1 8051-NP,Non-proprietary VersionNotes:* This Attachment provides a non-proprietary version of the document provided inAttachment 2 to this Enclosure.
- An affidavit is appended to the end of this Attachment and applies to the proprietary version of the document provided in Attachment
- 2. The affidavit provides the basesfor withholding the proprietary document from public disclosure, pursuant to 10 CFR2.390.*The redactions noted in this Attachment are annotated to indicate the corresponding bases for withholding the information from public disclosure and correspond to thebases as enumerated in the appended affidavit.
I Westinghouse Non-Proprietary Class 3WCAP- 18051 -NPRevision 0October 2015Palo Verde Nuclear Generating StationUnit 3 Reactor Coolant Pump 2A SuctionSafe End Instrumentation Nozzle Half-Nozzle Repair Evaluation Westinghouse Westinghouse Non-Proprietary Class 3WCAP-18051-NP Revision 0Palo Verde Nuclear Generating Station Unit 3 ReactorCoolant Pump 2A Suction Safe End Instrumentation NozzleHalf-Nozzle Repair Evaluation Matthew T. Coble*Major Reactors Components Design and Analysis
-INathan L. Glunt*Piping Analysis and Fracture Mechanics October 2015Reviewer:
James P. Burke*Major Reactors Components Design and Analysis
-IAnees Udyawar*Piping Analysis and Fracture Mechanics Approved:
Carl J. Gimbrone*,
ManagerMajor Reactors Components Design and Analysis
-IJohn L. McFadden*,
ManagerPiping Analysis and Fracture Mechanics
- Electronically approved records are authenticated in the electronic document management system.Westinghouse Electric Company LLC1000 Westinghouse DriveCranberry
- Township, PA 16066, USA© 2015 Westinghouse Electric Company LLCAll Rights Reserved Westinghouse Non-Proprietary Class 3 iiTABLE OF CONTENTSLIST OF TABLES ............
...........................................................................
ivLIST OF FIGURES.......................................................................................
v1 BACKGROUND AND INTRODUCTION...........................................................
1-12 FINITE ELEMENT MODELING.....................................................................
2-12.1 METHOD DISCUSSION.....................................................................
2-12.2 MESHED MODEL............................................................................
2-12.3 FEM MATERIAL
.............................................................................
2-42.4 THERMAL AND PRESSURE TRANSIENTS
...............................................
2-42.5 BOUNDARY CONDITIONS...............................................................
2-152.5.1 Thermal Boundary Conditions
..................................................
2-152.5.2 Structural Boundary Conditions
...........................
i.....................
2-152.5.3 Mechanical Loads ................................................................
2-202.5.4 Instrumentation Nozzle Inertial Loads..........................................
2-222.6 STRESS PATH LOCATIONS
.....................
i.........................................
2-242.6.1 Fracture Mechanics Evaluation Paths...........................................
2-242.6.2 Section III Evaluation Paths.....................................................
2-262.7 FINITE ELEMENT RESULTS FOR USE IN FRACTURE MECHANICS EVALUATIONS
.............................................................................
2-303 ASME SECTION III EVALUATION.................................................................
3-13.1 ACCEPTANCE CRITERIA..................................................................
3-13.1.l ASME Section III Design Rules ..................................................
3-13.1.2 Section III Evaluation Stress Allowable Values .................................
3-33.1.3 Design Fatigue Curves for Section III Analysis
.................................
3-83.2 STRESS RESULTS..........................................................................
3-103.2.1 Design Condition
.................................................................
3-103.2.2 Normal and Upset Conditions (Levels A and B)...............................
3-113.2.3 Test Conditions
...................................................................
3-113.2.4 Faulted Condition (Level D).....................................................
3-123.2.5 Fatigue Evaluation................................................................
3-133.3 VIBRATION ASSESSMENT...............................................................
3-134 FRACTURE MECHANICS EVALUATION.........................................................
4-14.1 METHODOLOGY............................................................................
4-14.1.1 Fatigue Crack Growth.............................................................
4-24.1.2 Structural Integrity of the RCP Suction Safe End...............................
4-34.1.3 Generation of Stress Intensity Factors............................................
4-94.1.4 Transient Stress Analysis
........................................................
4-124.1.5 Welding Residual Stress Analysis...............................................
4-134.2 FRACTURE MECHANICS EVALUATION RESULTS .................................
4-204.2.1 Fatigue Crack Growth Evaluation...............................................
4-204.2.2 Final Flaw Stability Evaluation
.................................................
4-214.2.3 Corrosion..........................................................................
4-334.3 FRACTURE MECHANICS SUMMARY AND CONCLUSIONS
......................
4-345 LOOSE PARTS EVALUATION.......................................................................
5-16 SUMMARY AND CONCLUSION
...................................................................
6-17 REFERENCES
.........................................................................................
7-1WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 3 iiiAPPENDIX A: ASME STRESS PATH LOCATIONS
....................................................
A-iA.I1 RCP SUCTION NOZZLE SAFE END LIMITING PATHS ...............................
A-I1A.2 REPLACEMENT NOZZLE LIMITING PATHS............................................
A-5A.3 ATTACHMENT WELD LIMITING PATHS ................................................
A-8WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3ivWestinghouse Non-Proprietary Class 3 ivTable 2-1 :Table 2-2:Table 2-3:Table 2-4:Table 2-5:Table 2-6:Table 3-1 :Table 3-2:Table 3-3:Table 3-4:Table 3-5:Table 3-6:Table 3-7:Table 3-8:Table 3-9:Table 4-1 :Table 4-2:Table 4-3:Table 4-4:Table 4-5:Table 4-6:Table 4-7:LIST OF TABLESTransients
............................................................................................
2-4Mechanical Loads on Cold Leg Pipe from [26] ..............
2-21NOp Loads without Deadweight
.................................................................
2-22Pressure Instrumentation Nozzle Mechanical Loads from [27] ................................
2-22Response Spectra at [ Hz...............................................................
2-22Instrumentation Nozzle Inertial Loads...........................................................
2-23Material Strength Properties
.......................................................................
3-4ASME Load Case Combinations...................................................................
3-4Section III Allowable Stresses for RCP Suction Nozzle Safe end, 1974 Code Year [2] ......3-6Section III Allowable Stresses for Replacement Nozzle and Weld, 1998 Code Year [3] .....3-7Design Condition Stress Results..................................................................
3-10Normal and Upset Condition Stress Results.....................................................
3-11Test Condition Stress Results .....................................................................
3-11Faulted Condition Stress Results .................................................................
3-12Fatigue Evaluation Results........................................................................
3-13ASME Section XI, Appendix C Safety Factors...................................................
4-6Fatigue Crack Growth Results....................................................................
4-21Screening Criteria Results for Limiting Transient Time Steps .................................
4-22LEEM Results for Axial Flaw.....................................................................
4-24LEFM Results for Circumferential Flaw ........................................................
4-24EPFM Results for Axial and Circumferential Flaws at 0.1" Crack Extension................
4-26Palo Verde Unit 3 RCP Suction Safe End Primary Stress Limit ...............................
4-32WCAP-l 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3VVLIST OF FIGURESFigure 1-1 : RCP Instrumentation Nozzle Repair Schematic.................................................
1-3Figure 2-1: FEM (Overall Section Cut through X-Y Plane) .................................................
2-2Figure 2-2: FEM (Close-up View of Pressure Instrumentation Region) ....................................
2-3Figure 2-3: Plant Heatup........................................................................................
2-5Figure 2-4: Plant Cooldown
....................................................................................
2-6Figure 2-5: Plant Loading ......................................................................................
2-7Figure 2-6: Plant Unloading
....................................................................................
2-8Figure 2-7: Reactor Trip -Envelope of Reactor Trip, Loss of Flow, and Loss of Load ...................
2-9Figure 2-8: 10% Step Increase................................................................................
2-10Figure 2-9: 10% Step Decrease
...............................................................................
2-11Figure 2-10: Loss of Secondary Pressure (0 to 4,000 Seconds)............................................
2-12Figure 2-11 : Loss of Secondary Pressure (Full Range).....................................................
2-13Figure 2-12: Leak Test.........................................................................................
2-14Figure 2-13: RCS Temperature Surfaces.....................................................................
2-15Figure 2-14: Fixed Boundary Conditions....................................................................
2-17Figure 2-15: Mechanical Load Boundary Conditions.......................................................
2-18Figure 2-16: Pressure Surfaces..................................................................
i.............
2-19Figure 2-17: Safe end Blowoff Pressure
.....................................................................
2-19Figure 2-18: Instrumentation Nozzle Blowoff Load ........................................................
2-20Figure 2-19: Flaw Evaluation Paths ..........................................................................
2-24Figure 2-20: Stress Orientation for Downstream Flaw Evaluation.........................................
2-25Figure 2-21: Typical Paths in RCP Suction Nozzle Safe end...............................................
2-26Figure 2-22: Typical Paths in Attachment Weld Cross-section
.............................................
2-27Figure 2-23: Typical Paths in Nozzle Body Cross-section
.................................................
2-27Figure 2-24: Typical Primary Membrane (Pm) Weld Path Locations.......................................
2-28Figure 2-25: Typical Path Locations in Nozzle Fillet Region ..............................................
2-29Figure 2-26: Typical Path Locations in Outboard End Region of Nozzle .................................
2-29Figure 2-27: Stress Intensity Contour Plot, End of Cooldown
.............................................
2-30Figure 2-28: Stress Intensity Contour Plot, Reactor Trip at Time --62.9 Seconds........................
2-31Figure 2-29: Stress Intensity Contour Plot, Loss of Secondary Pressure at Time = 75 Seconds.........
2-32Figure 3-1: Attachment Weld Design Requirements
[3]1..................................................
3-2Figure 3-2: Socket Weld Design Criteria
[28] ................................................................
3-3Figure 3-3: Design Fatigue Curve for SA-508 Class 1, per Figure I-9.1 [2]................................
3-8Figure 3-4: Design Fatigue Curve for SB-166, per Figure I-9.2.1 and Figure 1-9.2.2 [3] .................
3-9Figure 4-1: Corner Crack Geometry..........................................................................
4-10Figure 4-2: Axial Flaw Geometry
............................................................................
4-10Figure 4-3: Circumferential Flaw Geometry
................................................................
4-I1Figure 4-4: Residual Stress Evaluation Cut Paths [ 13]......................................................
4-15Figure 4-5: Residual Hoop Stress Results (psi) [13] ........................................................
4-16Figure 4-6: Residual Axial Stress Results (psi) [13] ........................................................
4-17Figure 4-7: Through-Wall Welding Residual Hoop Stress Profile [13]....................................
4-18Figure 4-8: Through-Wall Welding Residual Axial Stress Profile [13]....................................
4-19Figure 4-9: EPFM Evaluation Results for Axial Flaw -Step Load Increase Transient...................
4-26Figure 4-10: EPFM Evaluation Results for Axial Flaw -Reactor Trip Transient
.........................
4-27WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 VviFigure 4-11: EPFM Evaluation Results for Axial Flaw -Loss of Secondary Pressure Transient.......4-28 Figure 4-12: EPFM Evaluation Results for Circumferential Flaw -Step Load Increase Transient
.....4-29Figure 4-13: EPFM Evaluation Results for Circumferential Flaw -Reactor Trip Transient
.............
4-30Figure 4-14: EPFM Evaluation Results for Circumferential Flaw -Loss of Secondary PressureTransient.........................................................................................
4-31Figure A-I: Path Location 6 ...................................................................................
A-iFigure A-2: Path Location 1....................................................................................
A-2Figure A-3: von Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 Seconds .................
A-3Figure A-4: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 Seconds............
A-4Figure A-5: Path Location 61 ..................................................................................
A-5Figure A-6: Path Locations 58 and 60 ........................................................................
A-6Figure A-7: von Mises Stresses
-Cooldown Transient at Step 4, Time 10,800 Seconds .................
A-6Figure A-8: von Mises Stresses
-Upset Transient at Step 5, Time 62.89 Seconds ........................
A-7Figure A-9: Path Location 26 ..................................................................................
A-8Figure A-10: Path Location 31.................................................................................
A-9Figure A-Il: Path Location 39.................................................................................
A-9Figure A-12: Path Location 27 ...............................................................................
A-10Figure A-13: Path Location 19 ...............................................................................
A-10Figure A-14: Path Location 35 ...............................................................................
A-IlFigure A-IS: von Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 Seconds with Cutoutat Path 39.......................................................................................
A-12Figure A-16: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 Seconds withCutout at Path 39...............................................................................
A-I13WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 31-I-11 BACKGROUND AND INTRODUCTION During the 3R18 spring 2015 refueling outage at Palo Verde Nuclear Generating Station (PVNGS) Unit3, visual examinations of the reactor coolant pump (RCP) suction safe end revealed evidence of leakagein the annulus between the outer surface of the Alloy 600 instrument nozzle and the bore on the suctionsafe end. The most likely location of the flaw(s) is in the primary water stress corrosion cracking(PWSCC)-susceptible Alloy 82/182 weld and Alloy 600 instrument nozzle, along their fusion line insidethe safe end bore. The Alloy 600 instrument nozzle is attached with a partial penetration weld to theinside of the RCP suction safe end.The "half-nozzle" repair method was used to replace a portion of the Alloy 600 one-inch instrument nozzle as an alternative to the ASME Section XI [1] requirement to correct the observed leakage.
Therepair was made with an Alloy 690 PWSCC-resistant material half-nozzle, which was attached to the PaloVerde Unit 3 RCP suction safe end outside diameter.
For the half-nozzle repair [51, the instrument nozzleis severed on the outside of the RCP suction safe end. The remaining lower portion of the instrument nozzle is removed by boring into the suction safe end. The removed portion of the Alloy 600 instrument nozzle is then replaced with a section (half-nozzle) of a more PWSCC-resistant Alloy 690 material, whichwill then be welded to the outside surface of the suction safe end using a 52M weld filler (see Figure 1-1).The inner portion of the original instrument nozzle, including the partial penetration weld, is left in place.The half-nozzle repair has been successfully implemented on 73 Alloy 600 small-bore reactor coolantsystem hot leg nozzles (i.e., pressure taps, sampling line, and resistive temperature device thermowell nozzles) for Palo Verde Units 1, 2, and 3 [6, 7, 30, and 31]. Additionally, the half-nozzle method hasbeen used at many other Combustion Engineering (CE) designed nuclear steam supply system plants.The purpose of this report is to demonstrate the acceptability of the half-nozzle repair for the flawed RCPsuction safe end instrument nozzle at Palo Verde Unit 3 based on the following assessments:
- ASME Section III, Class 1 design analysis and Code reconciliation, including an evaluation of theClass 2 socket weld between the instrument nozzle and piping* Corrosion evaluation
- ASME Section XI fracture mechanics evaluation
- Stress corrosion cracking assessment
- Loose parts evaluation A detailed ASME Section III, Class 1 design analysis (Section
- 3) is performed to design the replacement weld and associated new half-nozzle.
The evaluations consider the primary stress, secondary stress, andfatigue usage factors in the existing suction nozzle safe end material, replacement nozzle and weld. Theevaluations consider the change in the Class 1 pressure boundary due to moving the weld location andcorrosion effects.The fracture mechanics evaluation (Section
- 4) will demonstrate that any flaws in the partial penetration J-groove weld that remain after the half-nozzle repair will not grow to an unacceptable flaw size into thesuction safe end carbon steel metal for the remaining life of the plant.A loose parts evaluation (Section
- 5) is performed to evaluate the effect that a postulated loose weldfragment(s) of the instrument nozzle partial penetration weld might have on a reactor coolant system(RCS) structure, system, or component (SSC).WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 31-2Wesigos No-rpitr Cls _-Portions of this report contain proprietary information.
Proprietary information is identified andbracketed.
For each of the bracketed
- sections, the reasons for the proprietary classification are providedusing superscripted letters "a" "c", and "e". These letter designations are:a. The information reveals the distinguishing aspects of a process or component, structure, tool,method, etc. The prevention of its use by Westinghouse's competitors, without license fromWestinghouse, gives Westinghouse a competitive economic advantage.
- c. The information, if used by a competitor, would reduce the competitor's expenditure of resources orimprove the competitor's advantage in the design, manufacture,
- shipment, installation, assurance ofquality, or licensing of a similar product.e. The information re, veals aspects of past, present, or future Westinghouse-or customer-funded development plans and programs of potential commercial value to Westinghouse.
WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 31-3Westinghouse Non-Proprietary Class 3 1-3Figure 1-1: RCP Instrumentation Nozzle Repair Schematic WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-1Wesigos No-rpitr Cls_ -2 FINITE ELEMENT MODELINGA three-dimensional finite element model (FEM) of the RCP suction nozzle safe end, the remnant nozzle,remnant weld, half-nozzle replacement nozzle, and the half-nozzle repair weld was created.
This modelwas used to perform an ASME Section III analysis and was used to determine the through-wall timehistory stresses for a fracture mechanics evaluation.
2.1 METHOD DISCUSSION An ANSYS' [18] FEM is created using the RCP and half-nozzle repair drawings
[19]. The FEM is athree-dimensional model that includes the RCP suction nozzle safe end, the remnant nozzle, remnantnozzle-to-safe end internal J-groove weld, replacement nozzle, and extemnal J-groove weld to the safe endouter diameter.
A temperature degree of freedom (DOF) model and a displacement DOF model arecreated.
The temperature DOF model will input thermal transients and will generate time-varying temperature profiles.
The temperature
- profiles, system pressure transients, RCP nozzle safe endmechanical loads, and pressure instrumentation nozzle mechanical loads are input to the displacement DOE model, resulting in output time-varying stress profiles.
Static runs containing uniform temperature,
- pressure, and mechanical loads are performed for seismic,
- accident, and design conditions.
Stresses andtemperatures through paths through the pipe base metal, pressure tap nozzle weld, and cladding will beoutput for downstream flaw evaluations.
An ASME Section III evaluation is performed on the transient and static cases.2.2 MESHED MODELThe pressure measurement instrument half-nozzle repair and RCP suction nozzle safe end FEM is shownin Figure 2-1. A three-dimensional model is developed in ANSYS [18] with SOLID70,
- SOLID87, andSOLID90 elements for the temperature DOF model, and with SOLID185,
- SOL1DI86, and SOL1D187elements for the displacement DOE model. An overall view of the FEM and a view of the region ofinterest are shown in Figure 2-1 and Figure 2-2, respectively.
The FEA analysis included an insidediameter bore of [ ]a,c,e inches which is equivalent to a diametric corrosion of [ ]a'c'e inch. This isgreater than the allowable of [ ]ace inch and also greater than the projected corrosion value of 0.1224inch in 40 years, thus it is conservative.
For the temperature DOE model, water mesh is included in theinstrumentation region between the remnant nozzle, the safe end, and the replacement nozzle, up to theClass 1 pressure boundary at the instrumentation nozzle to piping weld. The water mesh is removed fromthe displacement DOE model for the stress runs because it does not carry load or contribute to stiffness.
The safe end portion of the model was extended 40 inches beyond the bottom safe end boundary to offsetthe mechanical load application point. The load application point requires rigid beams which locally1ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, EKM, Engineering Knowledge
- Manager, FLUENT,HFlSS and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are trademarks orregistered trademarks of ANSYS, Inc. or its subsidiaries located in the United States or other countries.
ICEM CFDis a trademark used by ANSYS, Inc. under license.
CFX is a trademark of Sony Corporation in Japan. All otherbrand, product, service and feature names or trademarks are the property of their respective owners.WCAP- 18051 -NP October 2015Revision 0
Westinghouse Non-Proprietary Class 32-2-2over-restrains the model for radial growth due to pressure.
The offset distance isolates the region ofinterest from the stresses associated with this load application method. The extra distance requires theinput moments to be adjusted to remove the extra moment produced by the lateral (i.e., x-direction and z-direction) forces applied at the 40 inch moment arm. The moment adjustments are:Mx, adjusted
=Mx, applied +4 Fzapplied X rMz,adjusted
=Mz,app lied -- Fx, ap plied X rEquation 2-1Equation 2-2In Equation 2-1 and Equation 2-2 above, r is the 40 inch model extension, and Fapplied and Mapplied are theinput loads applied to the suction nozzle safe end.a,c~eFigure 2-1: FEM (Overall Section Cut through X-Y Plane)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-3Westinghouse Non-Proprietary Class 3 2-3a~c,eFigure 2-2: FEM (Close-up View of Pressure Instrumentation Region)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-2-42.3 FEM MATERIALThe material properties used in the analysis are from the 1974 ASME Code,Section II, Subsection NAwithout addenda [21 for the original
- geometry, and from the 1998 ASME Code,Section II, Part D [3] forthe replacement pressure instrumentation nozzle and repair weld. The displacement DOF model inputsare elastic modulus, Poisson's ratio, and the coefficient of thermal expansion.
The temperature DOFmodel inputs are density, thermal conductivity, and specific heat. Poisson's ratio and density are notprovided in [2] or [3], and are taken from Table PRD of the 2013 ASME Code,Section II Part D [4].The cladding is SA-240 Type 304 [19(b)],
the suction nozzle safe end is SA-508 Class 1 [20], the remnantpressure instrumentation nozzle is SB-166 Alloy 600 [21], and the replacement pressure instrumentation nozzle is SB-166 Alloy N06690 [19(e)].
The remnant weld and repair weld match the attached nozzlematerial properties (i.e., Alloy 600 for the remnant and Alloy 690 for the replacement nozzle).
Thethermal properties of water are obtained as a function of temperature at normal operation pressure of[ ]a~c~e psia from [22].2.4 THERMAL AND PRESSURE TRANSIENTS The thermal and pressure transients for normal, upset, faulted, and test conditions used in this analysis arebased on [22 and 23]. The transients are listed in Table 2-1 and are shown in Figure 2-3 through Figure2-12. Hydrostatic Test is included for fracture mechanics evaluations.
The design specification
[22]specifies a maximum pressure of [ ]a~c~e psia; however, Article IWB-5000 of [1] specifies a maximumvalue 1.1 times the operating
- pressure, or [ ]a,c,e psia. For the analysis, a bounding value of[ ]a~c~e psia was used. Reference
[22] does not specify' a temperature curve; therefore, it was assumedthat the temperature transient matches the Leak Test temperature transient.
Table 2-1: Transients a,c,eWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-5Westinghouse Non-Proprietary Class 3 2-5a~ceFigure 2-3: Plant HeatupWCAP-1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 2-6__a~c,eFigure 2-4: Plant CooldownWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-7Westinghouse Non-Proprietary Class 3 2-7a,c,eFigure 2-5: Plant LoadingWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 2-8ac~eFigure 2-6: Plant Unloading WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-2-9ace-Figure 2-7: Reactor Trip -Envelope of Reactor Trip, Loss of Flow, and Loss of LoadWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-10Westinghouse Non-Proprietary Class 3 2-10a,c,eFigure 2-8: 10% Step IncreaseWCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-11Westinghouse Non-Proprietary Class 3 2-11a~ceFigure 2-9: 10% Step DecreaseWCAP- 1805 I-NPOctober 2015Revision 0
v2-12Westinghouse Non-Proprietary Class 3 2-12a,c,eFigure 2-10: Loss of Secondary Pressure (0 to 4,000 Seconds)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-13a,c,eFigure 2-11: Loss of Secondary Pressure (Full Range)WCAP-1I8051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 32-14Westinghouse Non-Proprietary Class 3 2-14a,c,e-Figure 2-12: Leak TestNote: The leak test temperature transient is used to evaluate the hydrostatic test transient.
The maximumpressure considered for hydrostatic test is [ ] ,ceo psi.WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-152.5 BOUNDARY CONDITIONS 2.5.1 Thermal Boundary Conditions The zone for temperature application is shown in Figure 2-13. The wetted zone for temperature includesjust the inside cavity of the nozzle; further into the nozzle solid elements representing water mesh areincluded.
The water acts only as a conductive heat transfer path and as thermal inertia; no naturalconvection is considered in this region. This is appropriate for stagnant water. The RCS flow rate is verylarge; therefore, it is appropriate to treat the heat transfer coefficient as infinite and directly apply the RCStemperature to the metal surface with the displacement constraint command (i.e., the metal surfacetemperature is instantaneously equal to the RCS water temperature).
The pipe external surfaces areadiabatic because they are insulated.
The sliced surfaces at the top and bottom of the safe end areadiabatic because the un-modeled structure would not significantly impact the thermal gradients in theregion of interest.
The temperature gradients would be radial, which is captured accurately with theadiabatic boundary condition.
a,c,eFigure 2-13: RCS Temperature Surfaces2.5.2 Structural Boundary Conditions The fixed boundary conditions are shown in Figure 2-14. The top face of the cold leg nozzle safe end isrestrained in the axial and circumferential directions.
This provides sufficient fixity to prevent rigid bodymotion and to properly react out applied mechanical loads without over-restraining the model for radialthermal growth.An array of rigid BEAM188 elements is located at the center of each load application region. Theseboundary conditions are Shown in Figure 2-15. These elements are used to input the mechanical loadsWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-16from the RCS piping and instrument Class 2 piping to the FEM. The SOLIDI 8X type elements do nothave rotational degrees of freedom; therefore, the rigid BEAM 188 elements transmit moments over agrouping of nodes on the solid elements.
The zone for pressure application is shown in Figure 2-16. Water is removed from the displacement DOFmodel and RCS pressure is applied on the entire inside surface of the pipe safe end and the pressureinstrumentation nozzle. The pipe safe end is not capped; therefore, a blowoff pressure is calculated togenerate the appropriate tensile load in the safe end. The blowoff pressure is based on the ratio of theuncapped open area to the cross-section area:32Ps=Pi(r2-r2)Equation 2-3In Equation 2-3:P = calculated blowoff pressureP = applied RCS pressurero=outer radius of annular cross-sectioninner radius of annular cross-section The inner radius used in the calculation of the safe end blowoff pressure includes the cladding, which ispart of the FEM. The safe end blowoff pressure condition is shown in Figure 2-17.The pressure instrumentation nozzle is also not capped, which results in an internal load acting in the +ydirection.
A blowoff load is applied to offset this internal load so that the forces balance in equilibrium.
The load is equal to the internal pressure times the open area and acts in the -y direction.
The load isapplied to the same mass element used for the mechanical load application.
The pressure instrumentation nozzle blowoff pressure condition is shown in Figure 2-18.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 212-17a,c,eFigure 2-14: Fixed Boundary Conditions WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 21aceaceFigure 2-15: Mechanical Load Boundary Conditions WCAP-1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-19Westinghouse Non-Proprietary Class 3 2-19a,c,eFigure 2-16: Pressure Surfacesa,c,eFigure 2-17: Safe eud Blowoff PressureWCAP- 1 805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-20a,c,eFigure 2-18: Instrumentation Nozzle Blowoff Load2.5.3 Mechanical LoadsRCP suction nozzle safe end loads are from [26]. The loads are provided for deadweight, five normaloperation (NOp) cases, seismic condition, and accident conditions; see Table 2-2. The accident condition is the square root sum of the squares of SSE and rupture.
The loads are provided in the global Cartesian coordinate system (where the x-axis is from the reactor to steam generator 2, the y-axis is vertical, and thez-axis follows with the right-hand rule). The suction nozzle is oriented in the vertical direction; therefore, the x-direction and z-direction loads are shear forces and bending moments, and the y-direction loads areaxial force and torque.The safe end NOp loads include deadweight.
For this analysis, the time-varying portion of the NOp loadsmust be isolated so it can be scaled independently of deadweight.
The deadweight load is subtracted fromeach of the five NOp load cases. Reference
[26] indicates that the five NOp conditions are:(1) deadweight
+ thermal without friction at full power(2) deadweight with friction at start of heatup (70°F)(3) deadweight
+ thermal with friction at end of heatup (565°F [22])(4) deadweight
+ thermal with friction at start of cooldown (565°F from [22])WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-21(5) deadweight with friction at end of cooldown (70°0F)These cases correspond directly to Heatup and Cooldown transients, and are applied coinciding with thetemperature changes during the transients.
For the Leak Test transient, the loads were interpolated forconditions (2) and (3) at 100°F and 4000F, respectively, as shown below:flOOOF =F2 + 55F _ 70F2 (10 00F -700F) Equation 2-4f4o0o0 = F2 + 5oF3 _ 70F (400°F -700F) Equation 2-5In Equation 2-4 and Equation 2-5, F2 and F3 are the heatup loads corresponding to NOp conditions (2) and(3). The NOp minus deadweight loads are listed in Table 2-3. The loads are converted into lbf and in'lbffor the ANSYS FEM.Pressure instrumentation nozzle mechanical loads from [27] are listed in Table 2-4. These loads are dueto weight and inertial effects of the Class 2 piping on the nozzle. Inertia loads due to OBE, SSE, andbranch line pipe break (BLPB) on the instrumentation nozzle itself will be derived in subsection 2.5.4.Table 2-2: Mechanical Loads on Cold Leg Pipe from [26]a,c~e-Notes:(1) Seismic and accident loads are the square root of the sum of squares of the pipe load.(2) accident
=square root of the sum of squares (SSE, rupture)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-22Table 2-3: NOp Loads without Deadweight (1) Maximum extreme values (positive or negative) are used for the NOp condition.
Table 2-4: Pressure Instrumentation Nozzle Mechanical Loads from [27]-- a,c,eNote:*] a,c,eNote:(1) SSE loads can be positive or negative.
2.5.4 Instrumentation Nozzle Inertial LoadsThe pressure instrumentation nozzle inertia loads are calculated by determining the lowest cantilever mode frequency of the nozzle and reading acceleration responses from various spectra plots at thisfrequency.
A modal analysis of the Class 2 piping and a representation of the instrumentation nozzleprovide a cantilever mode frequency of [ ]a~c, Hz. The design response spectra accelerations forseismic and BLPB loading for the instrument nozzle are listed in Table 2-5. The seismic spectraaccelerations are 1% damping for OBE and 2% damping for SSE and BLPB. The nozzle mass is []ac.e, lbs. The inertial loads are equal to the spectra acceleration multiplied by the nozzle mass, and arelisted in Table 2-6.able 2-5: Response Spectra at[ace a,c,eWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 2-23Table 2-6: Instrumentation Nozzle Inertial Load1* a,c,eWCAP- 1805 1-NPOctober 2015.*Revision 0
Westinghouse Non-Proprietary Class 32-24Westinghouse Non-Proprietary Class 3 2-242.6 STRESS PATH LOCATIONS 2.6.1 Fracture Mechanics Evaluation PathsPaths are defined in ANSYS to generate temperature and stress profiles along a given path. The paths areshown in Figure 2-19. Paths I through 6 are located on the vertical plane intersecting the pressureinstrumentation nozzle centerline and the safe end centerline (i.e., direction of hoop stress).
Paths 7through 12 are located on the horizontal plane intersecting the pressure instrumentation nozzle centerline.
Paths 13 through 24 are not shown in the figure below for clarity, but are symmetric with respect to thepaths I through 12 (i.e., paths 13 through 18 lie on the vertical plane below the instrumentation nozzleand paths 19 through 24 lie on the horizontal plane on the opposite side relative to paths 7 through 12).Stresses are provided in a cylindrical coordinate system where the x-direction is radial, the y-direction iscircumferential, and the z-direction is axial. The cut paths are locally straight; therefore, the x-direction stress is a radial stress, the y-direction stress is a hoop stress, and the z-direction stress is an axial stress,as shown in Figure 2-20.F- ~ a,c,eFigure 2-19: Flaw Evaluation PathsWCAP- 18051-NPOctober 2015Revision 0
v ._2-25Westinghouse Non-Proprietary Class 3 2-25a,c,eFigure 2-20: Stress Orientation for Downstream Flaw Evaluation WCAP-1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-26Westinghouse Non-Proprietary Class 3 2-262.6.2 Section III Evaluation PathsThe ASME evaluation is focused on stresses in the replacement pressure instrumentation nozzle, the weldbetween the replacement nozzle and the safe end, and region on- the safe end around the instrumentation nozzle opening.
Figure 2-21 through Figure 2-26 show typical paths used in the ASME evaluation.
Theterm "cut" is used in the figures to denote a stress evaluation path. In general, all paths are repeatedaround the instrumentation nozzle in 900 intervals.
Additional paths are also included to capture specificnodes with high stress ranges, not shown in the following figures.Figure 2-21 shows the typical paths in the RCP suction nozzle safe end. These paths are shown with halfof the nozzle opening hidden. There are twelve paths on the inner radius of the nozzle hole opening (in3Q0 intervals),
and five paths on the outer radius of the hole opening near the chamfer cut for the remnantweld (paths 6 and 9 shown below). The paths on the inner radius of the nozzle hole opening are excludedfrom the primary membrane (Pmo) stress check of the safe end because they are located at a peak stresslocation.
Paths 6 through 9 are used for the Pm check on the safe end.-, a,c,eFigure 2-21: Typical Paths in RCP Suction Nozzle Safe endWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-27Westinghouse Non-Proprietary Class 3 2-27Figure 2-22 shows the typical paths on the replacement nozzle weld. These paths are repeated in 900intervals around the nozzle axis. Corresponding paths are set radially into the nozzle body atapproximately equal nodes, as shown in Figure 2-23.__ ~a~ce-Figure 2-22: Typical Paths in Attachment Weld Cross-section a,c,e-Figure 2-23: Typical Paths in Nozzle Body Cross-section WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-28The paths in the weld region are divided, such that only paths on the primary shear plane of the weld areused in the primary membrane stress check. All other weld path membrane stresses are at peak stresslocations.
Paths 18, 19, 22, 23, 26, 27, 30, and 31 are included in the primary membrane (Pm) stresscheck. A cutaway of the weld is shown in Figure 2-24, with paths 18, 19, 30, and 31 shown.a,c,eFigure 2-24: Typical Primary Membrane (Pmo) Weld Path Locations WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 222-29Figure 2-25 and Figure 2-26 show the typical paths in the outer region of the replacement nozzle. Thesepaths capture high stress areas in the fillet and transition region of the nozzle.-- a,c,eFigure 2-25: Typical Path Locations in Nozzle Fillet Regiona,c,eFigure 2-26: Typical Path Locations in Outboard End Region of NozzleWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 32-30Westinghouse Non-Proprietary Class 3 2-302.7 FINITE ELEMENT RESULTS FOR USE IN FRACTURE MECHANICS EVALUATIONS Figure 2-27 through Figure 2-29 show the stress intensity contour plots for some of the limitingtransient cases for the Cooldown, Reactor Trip, and Loss of Secondary Pressure that are evaluated in the fracture mechanics analysis.
Figure 2-27: Stress Intensity Contour Plot, End of CooldownNote: Stress displayed in the above figure is in units of psi.a,c,eWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 32-31Westinghouse Non-Proprietary Class 3 2-31a~ceFigure 2-28: Stress Intensity Contour Plot, Reactor Trip at Time = 62.9 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 232-32a,c,eFigure 2-29: Stress Intensity Contour Plot, Loss of Secondary Pressure at Time = 75 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-13 ASME SECTION III EVALUATION An ASME Section [II evaluation is performed to demonstrate the structural integrity of the half-nozzle repair geometry with regards to primary stresses, primary plus secondary
- stresses, and fatigue usagefactors.
Stress intensity values are calculated using the FEM detailed in Section 2. Primary, primary plussecondary, and peak stresses are evaluated using the paths shown in subsection 2.6.2.3.1 ACCEPTANCE CRITERIAPer the ASME Code reconciliation in [17], the replacement nozzle was procured to the 1998 ASME Codeyear up to and including 2000 Addenda [3]. The construction Code for the existing RCP is 1974 with noaddenda [2]. Therefore, the existing material is qualified per the construction code [2], and the newreplacement nozzle and attachment weld are qualified to the newer code year, 1998 with 2000 Addenda[3].3.1.1 ASME Section III Design RulesThe welds connected to the new nozzle in this half-nozzle repair are governed by design rules in SectionIII of [2 and 3]. This includes the attachment weld connecting the replacement nozzle to the RCP safeend and the socket weld connecting the replacement nozzle to downstream Class 2 piping.Attachment WeldPer Section NB-335 1.4 of [3], this is a Category D weld meeting the requirements of Section NB-4244(d)
[3] for attachment of nozzles using partial penetration welds. Therefore, Figure N~B-4244(d)-I applies tothis type of attachment weld. Section (c) of Figure NB-4244(d)-1 is the most applicable to this design, asshown here in Figure 3-1.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-2Westinghouse Non-Proprietary Class 3 3-2Cc1(Note (1)]GENERAL NOTES:Ia) Weld deposit reinforcement, if used, shell be examined as required in NS-5244.lb) The 3/ t. mai. dimension applies to the fillte leg and the J-groove depth.{cd Weld groove design for oblique nozzles of this type requires special consideration to achieve the 1.25th minimum depth ofweld and adequate access for welding inspection.
With due regard to the requirements in Fig. NO-4244(c)-1, the welds shownin the sketches may be on either the inside or the outsida.
Weld preparation may be J-groove as shown or straight bevel, Ifweld deposit reinforcement is not used. r, shell apply to 1.0. of base materiel instead of I.D. of weld buildup.IdI For definitions of symbols, see NB-3352.4(d) for vessels and N 8-3643 for piping.FIG. NB-4244(d)-1 PARTIAL PENETRATION NOZZLE AND BRANCH PIPING CONNECTIONS Figure 3-1: Attachment Weld Design Requirements
[31The requirement for the size of the weld is that the groove depth be at least 3/4ta, where t. is the nozzlebody thickness.
The nozzle body thickness, t., is equal to [ ]a.Cde inches. The minimum requireddepth is 3/4 x [ ]a c... inches = [ ]a.C~C inches. The design weld depth is 1/2 inch, and is greaterthan the required
[ ]a~CC inches. The 3/4tn requirement also applies to the width of the fillet weld leg,as shown Figure 3-1. The fillet weld length is [ inches. This also meets the 3/4t. requirement.
Figure NB-4244(d)-1, (c) of [3] also requires that the total weld size of the groove depth plus fillet legheight be a minimum of 1 .5th. The full weld size is 3/4 inches, which is greater than the required[ ]asce inches (1.5 x [ ]a,c,e inches =[ ]a5c~ inches).Socket WeldThe Class 2 socket weld connecting the instrumentation nozzle to the downstream piping is qualified bydesigning the socket weld according to Section NC-3661 .2 of [2]. Because the weld is sized according todesign-by rules, it is qualified within the qualification of the existing Class 2 piping.Section NC-3661.2 of [2] references Figure NC-4427-1, which calls for a fillet weld leg size of 1.09 timesthe piping thickness.
The socket weld is designed in accordance with [28] using a 2:1 ratio. Using this2:1 ratio, the minimum fillet weld leg is 1.09 times the piping thickness on the shorter leg and 2.18 timesthe thickness along the pipe axis. This layout is shown in Figure 3-2.WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-3Westinghouse Non-Proprietary Class 3 3-3tn~~ j..' I- x -- x =1.09 xtn1--- for welds to fittings= smaller of .4xxtnWELD -, I or hub thickness
.-2X, for welds to flanges21K' GAP = 1/16"' MIN.Figure 3-2: Socket Weld Design Criteria 1281The attached Class 2 piping is 3/4-inch Schedule 160. The thickness of the pipe is [ ]a~ce inches. Theminimum fillet leg sizes are [ "]a~C~e inches and [ ]a'c'e inches (1.09 x [ in = [ ]a,c,e in,2 x [ a,c,e in =[ ]a,c,e in). The socket weld fillet sizes of [ ]ace inches and [ ]aC'e inchesexceed this requirement.
Section NC-3661.2 of [2] cites the ANSI Standard B 16.11 [291. However, the dimensional information inB 16.11 is not a requirement, as discussed in Section 1.2 of [29]. All dimensions related to the design ofthe fitting (bore depth, diameter, etc.) have been designed on the replacement instrumentation nozzle tomatch the original design.3.1.2 Section III Evaluation Stress Allowable ValuesAll stress evaluations are performed in accordance with Section NB-3200 of [2 and 31. According to NB-3225, the rules of Appendix F of [2 and 3] apply for faulted conditions (service Level D). All stressintensities (SI) are derived in accordance with Section NB-321 5 [2 and 3]. Stress intensity limits are inaccordance with Figure NB-3221-l for design conditions and Figure NB-3222-1 for normal and upsetconditions (service Levels A and B). There are no emergency (Level C) conditions specified."
Testconditions are evaluated in accordance with Section NB-3226.
Special stress limits are evaluated for pureshear on the attachment weld for all loading conditions.
The pure shear check applies only to the weld paths. However, these checks are included for all paths forsimplicity in post-processing.
Maximum Average ShearDefinition:Tax=5/
Maximum shear is set as half of the overall stress intensity for membrane stresses only. Membranestresses are used because this is a stress check for pure shear, without consideration of bending.Therefore, tmm, = Pm/2.This is the maximum overall shear stress for pure shear loading.Table 3-1 lists the applicable Sm and Sy, values for the RCP suction nozzle safe end and replacement instrumentation nozzle. The material strength properties for the replacement nozzle are used forevaluation of the attachment weld. The weld material used for this repair was ERNiCrFe-7A.
This is anew weld material that did not exist in the 1974 or 1998/2000 ASME Codes. Therefore, the materialproperties for the weld filler material are taken from a recent version of ASME for comparison
[4].WCAP- 1805 I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-4Section SFA-5.14/SFA-5.14M of Section II, Part C of [4] shows a minimum tensile strength forERNiCrFe-7A filler metal of 85 ksi. This is slightly higher than the ultimate strength of the Alloy 690base metal (S, = 80 ksi, as shown in Table 3-1). Therefore, it is acceptable to use the material strengthproperties of the SB-166 alloy for the ERNiCrFe-7A weld filler material.
Table 3-1: MaeilSrnt Prop~erties~te Copnn aeilMaterial Sm Sy Su ASME CodeReference (at 650°F) (at 4000F)(l)
(at 650°F) YearRCP Suction SA-508 Class 1 [0 70ki 3. s oe217 2Nozzle Safe end (Carbon Steel) [0 70ki 3. s oe217 2Replacement S-6 lo 1() 33ki 2. s 00ki 19 3Instrumentation NB-0669Alo Nozzle _________
______________
Notes:(1) The value of Sy is only used for the test condition allowable.
Therefore, it is taken at the test condition temperature of 400°F.(2) Values for ultimate
- strength, Su, are not available in the 1974 Code year [2]. The ultimate strength is only used forthe allowable stress under faulted conditions (minimum of 2.4Sm and 0.7Su). Therefore, the value of 2.4Sin is usedfor that allowable stress check.Table 3-2 summarizes the load case combinations used for each load case as they apply to the ASMEgroupings of design, Levels A and B, Level D, and test conditions.
There are no Level C conditions forthis analysis.
Table 3-2: ASME Load Case Combinations Condition Case [Definition Design Design Conditions Pressure
+Deadweight LoadsPlant HeatupPlant CooldownPlant LoadingNormal Plant Unloading Applicable Pressure and Thermal Transient (Level A) 10% Step Increase
+ Normal Operation Mechanical Loads(+20°F, +100 psi)10% Step Decrease(-20°F, -100 psi)Reactor Trip, Loss of Flow, Upset Pressure and Thermal Transient
+Loss o LoadMechanical LoadUpsetNormal Operation Pressure and(Level B) OBE Temperature
+ Safe end and________________________
Instrumentation Nozzle OBE loadsLoss of Secondary Pressure Thermal andFaulted Loss of Secondary Pressure Pressure Transient (Level D) Safe Shutdown Earthquake (SSE) Normal Operation Pressure andSSE and Pipe Break Temperature 4- Accident LoadTest Leak Test Pressure and Thermal Transient
+ Normal Operation Mechanical LoadsWCAP- 1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-5Table 3-3 summarizes the allowable stresses for all loading conditions for the 1974 Code year [2], whichis applicable to the SA-508 Class 1 RCP suction nozzle safe end. Table 3-4 summarizes the allowable stresses for all loading conditions for the 1998 Code year with 2000 Addenda [3], which is applicable tothe SB-166 replacement nozzle and weld material.
WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-6Table 3-3: Section III Allowable Stresses for RCP Suction Nozzle Safe end, 1974 Code Year [2]ASME RCP Suction Nozzle Safe endCondition t2) Stress Category")
Reference Lmt Sm or Sy. (ksi) Allowable (ksi)Primary Membrane Stress Intensity, Pm NB-3221.1 Sm 17.0 17.0Local Primary Membrane Stress Intensity, PL NB-3221.2 1.5 Sm 17.0 25.5DeinPrimary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3221.3 1.5Sm 17.0 25.5Maximum Average Primary Shear Stress NA -Pure shear stresses are only evaluated for the weld.Normal and Primary + Secondary Stress Range (Pmo + Pb + Q) NB-3222.2 J 3Srm 17.0 51.0Upset Cumulative Usage Factor NB-3222.4
] 1 -- j Ui < 1.0(Levels A_______
________and B)(3) Maximum Average Primary Shear Stress NA -Pure shear stresses are only evaluated for the weld.TetPrimary Membrane Stress Intensity, Pm NB-3226(a)
- 0. 9Sy -Sy =30.0 ksi 27.0Primary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3226(b) 1.5y at 400°F 40.5Faulted Primary Membrane Stress Intensity, Pm F-1323.1 (b) 2.4Sm 17.0 40.8(Level D) Primary Membrane
+ Bending Stress Intensity (PL + Pb) F-1323.1(b) 1.5x2.4Sm 17.0 61.2Notes:(1) ANSYS membrane stresses include general (Pmo) and local (PL) effects.
The PL evaluation is bounded by the Pm evaluation, which has lower allowable stresses.
(2) There are no emergency conditions specified for this design [22]. The plant leak test is included in the fatigue evaluation.
- (3) The normal allowable stress for primary +/- secondary stresses is used to qualify the normal and upset transient cases. This is conservative because theallowable stresses may be increased by 10% for upset conditions.
WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-7Table 3-4: Section III Allowable Stresses for Replacement Nozzle and Weld, 1998 Code Year [31Cdiin2StesASME Limit SB-166 Alloy 690Cniin)StesCategory~l)
Reference Smn, Sy, or Su. (ksi) Allowable (ksi)Primary Membrane Stress Intensity, Pm NB-3221.1 Sm 23.3 J 23.3Local Primary Membrane Stress Intensity, PL NB-3221 .2 1 .5Sm See Note 1Design Primary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3221.3 1.5Sin 23.3 35.0Maximum Average Primary Shear Stress (Minimum Allowable of NB-3227.2(a) 0.6Si233n4.
Average and Maximum Shear Paragraphs)
NB-3227.2(b) 0.8Sm________
Normal and Primary + Secondary Stress Range (Pmo + Pb + Q) NB-3222.2 3Sin 23.3 69.9Upset Cumulative Usage Factor NB-3222.4 1 -- Ui < 1.0(Levels A Maximum Average Primary Shear Stress (Minimum Allowable of NB-3227.2(a) 0.6Sm 331.and B)3) Average and Maximum Shear Paragraphs)
NB-3227.2(b) 0.8Sr, 23.3______
14.0____Primary Membrane Stress Intensity, Pm NB-3226(b) 0.9Sy Sy = 28.6 ksi at 25.7Test Primary Membrane
+ Bending Stress Intensity (PL + Pb) NB-3226(C) 1 .358y4) 400°F 3.Maximum Average Primary Shear Stress (Minimum Allowable of NB-3227.2(a) 0.6Si233n4.
Average and Maximum Shear Paragraphs)
NB-3227.2(b) 0.8Sin ________PrmryMmbae tes ntnitPmF1311()
Lesser of Sm=23.3 55.9FaultedraeSresItesty mF-13.1()
2.48m, 0.7Su Su=80.0Fauted1.5 x P1,(Level D) Primary Membrane
+ Bending Stress Intensity (PL + Pb) F-1331.1 (c) allowable
-- 83.9Maximum Average Primary Shear Stress F- 1331.1 (d) 0.42Su 80.0 33.6Notes:(1) ANSYS membrane stresses include general (Pmo) and local (PL) effects.
The PL evaluation is bounded by the Pm evaluation, which has lower allowable stresses.
(2) There are no emergency conditions specified for this design [22]. The plant leak test is included in the fatigue evaluation.
(3) The normal allowable stress for primary + secondary stresses is used to qualify the normal and upset transient cases. This is conservative because theallowable stresses may be increased by 10% for upset conditions.
(4) Per Section NB-3226(c)
[3], the allowable stress for Pm +-Pb is 1.35 Sy, only when Pm is less than 0.67 Sy,. The results for the SB-166 material in Section3.2.3 show the maximum Pm for test condition is 12.39 ksi, which is less than 0.67 Sy (19.l6 ksi).WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-83.1.3 Design Fatigue Curves for Section III AnalysisThe design fatigue curves used in the fatigue analysis of the RCP suction nozzle safe end and thereplacement nozzle and weld are tabulated from the appropriate ASME references, as shown in Figure 3-3and Figure 3-4.For the RCP suction nozzle safe end, the applicable fatigue curve is reported in Figure 1-9.1! in Subsection NA of the 1974 Code [2]. The plot in Figure 1-9.1 shows two curves, for ultimate tensile strength lessthan 80 ksi or between 115 ksi and 130 ksi. The dashed curve for Su, < 80 ksi is used for the SA-508material.
Figure 3-3 summarizes the data tabulated from Figure 1-9.1. The alternating stress values arescaled based on the ratio of the modulus of SA-508 Class l at the maximum cycle temperature versus themodulus that the fatigue curve was developed for. In this case the modulus at temperature is taken at thedesign temperature of 650°F as 26.05x106 psi. The fatigue curve was developed for a modulus of30.0X 106 psi. The ratio is then calculated as 26.05/30.0.
K Design Fatigue Curve for SA-508 Class 11.E+03E = 26.05E+03 ksi @650°FAdjusted Data = RawData x (26.05/30)
'Im1.E+021.E+01----Adjusted Data----Figure I-9.1 RawData1.E+O00...
1.E+011. E+021. E+031.E+051.E+061.E+04Number of CyclesFigure 3-3: Design Fatigue Curve for SA-508 Class 1, per Figure 1-9.1 [21WCAP-1805 l-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-3-9The applicable fatigue curve for the replacement nozzle and weld SB- 166 material is reported in Figure I-9.2.1 and Figure 1-9.2.2 in Appendix I of the 1998 Code [3]. Figure 3-4 summarizes the data tabulated from the two figures (numerical values for the design fatigue curve are shown in Table 1-9.1 and Table I-9.2.2 [3]). The data for curve C from Figure I-9.2.2 are used to obtain the most conservative result. Thealternating stress values are scaled based on ratio of the modulus of SB-166 at the maximum cycletemperature versus the modulus that the fatigue curve was developed for. In this case the modulus attemperature is taken at the design temperature of 6500F as 27.85x106 psi. The fatigue curve wasdeveloped for a modulus of28.3x10 6 psi. The ratio is then calculated as 27.85/28.3.
Design Fatigue Curve for 5B-1661.E+031.E+021.E+01E = 27.85E+03 ksi @650°FAdjusted Data = RawData x (27.85/28.3)
Figure I-9.2.1 RawData---Adjusted Data1.E+03 1.E+05 1.E+07 1.E+09Number of Cycles1.E+11Figure 3-4: Design Fatigue Curve for SB-166, per Figure 1-9.2.1 and Figure 1-9.2.2 [3]WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 33-10WetnhueNnPoreayCas331 3.2 STRESS RESULTSThe stress results are separated into the following conditions:
design, normal and upset (Levels A and B),test, and faulted (Level D). To evaluate the various stresses for each case, a set of 80 path locations wasestablished to output linearized stresses at key locations.
The same path locations were used for all cases.The result tables in this section show the worst-case path for each stress result. Plots showing thesespecific paths are included in Appendix A.3.2.1 Design Condition Table 3-5 summarizes the results for the design condition.
All stresses are shown to be within theallowable limits of [2 and 31.-- Table 3-5: Design Condition Stress Resultsa,c,eWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class33-113.2.2 Normal and Upset Conditions (Levels A and B)Table 3-6 summarizes the results for the normal and upset conditions.
All stresses are shown to be withinthe allowable limits of [2 and 3]. The primary stress checks for Levels A and B conditions are boundedby the design condition evaluations.
The Upset condition includes OBE loading, as well as an envelopetransient including Reactor Trip, Loss of Flow, and Loss of Load. This enveloping transient goes slightlyabove design pressure.
- However, this increase in pressure is bounded by the 10% increase in allowable stresses for Level B conditions per NB-3223 [2 and 3].The case pairings listed in Table 3-6 are for the highest stress range on each component.
Table 3-6: Normal and Upset Condition Stress Resultsa,c,e3.2.3 Test Conditions Table 3-7 summarizes the results for the test condition.
All stresses are shown to be within the allowable limits of [2 and 3].-Table 3-7: Test Condition Stress Resultsa,c~eWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 33-12Westinghouse Non-Proprietary Class 3 3-123.2.4 Faulted Condition (Level D)Table 3-8 summarizes the results for the faulted conditions.
All stresses are shown to be within theallowable limits of [2 and 3].Table 3-8: Faulted Condition Stress Results -1 a~ceWCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 313-133.2.5 Fatigue Evaluation Table 3-9 summarizes the results of the fatigue evaluation for the RCP suction nozzle safe end and thereplacement nozzle. The total cumulative usage was calculated at each path node for the SA-508 suctionnozzle safe end, SB-166 replacement nozzle, and replacement weld materials separately.
The results ofthe fatigue evaluation include all Level A, Level B, and the leak test transient cases, including OBEloading.Table 3-9: Fatigue Evaluation Results a,c,e3.3 VIBRATION ASSESSMENT Section 4.3 of [23] states that the RCS may experience vibratory excitation with frequencies of:* [ ]a,c~e CPS -lower range* Ii* []ac... CPS -middle range]ac~e CPS -upper rangeThe replacement instrumentation nozzle has relocated the attachment weld; therefore, the naturalfrequency of the nozzle and the attached Class 2 piping are evaluated to ensure that neither is within theexcitation ranges.This minimum piping frequency is [ ]a,c,e Hz and the instrumentation nozzle frequency is [ ]a,c,eHz to [ ]a'c'e Hz. Both of these modes are outside of the restricted ranges, which is acceptable toavoid a resonant vibration issue. All other frequencies are well outside of the restricted ranges.Since the replacement instrumentation nozzle was installed, APS has performed vibration testing tomonitor the potential vibration of the system due to the repair. The evaluation in [24] shows that themaximum displacement of the system was no greater than [ ]ac, mils (peak-to-peak).
The calculated peak velocity due to this level of vibration was [ ]ace' inches per second, which is well below theallowable of 0.5 inches per second [25], as discussed in [24].WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-14 FRACTURE MECHANICS EVALUATION The fracture mechanics evaluation conservatively assumes that the entire radial extent of the partialpenetration weld is hypothetically flawed in either the axial or circumferential orientation.
Therefore, tosupport continued operation of Palo Verde Unit 3 with a half-nozzle repair to the RCP suction safe endinstrumentation nozzle, a fracture mechanics evaluation is performed herein in accordance with theASME Section XI acceptance criteria
[1]. This evaluation demonstrates structural integrity of the RCPsuction nozzle safe end with the flawed partial penetration weld for 40 years of plant operation.
Anoperation duration of 40 years envelops the remaining life of Palo Verde Unit 3, including licenserenewal.The evaluation performed herein also considers the analysis of small diameter Alloy 600/690 half-nozzle repairs in WCAP- 15973-P-A
[5] and Relief Request 31, which was previously submitted and approvedfor the Palo Verde Units 1, 2, and 3 small-bore hot leg Alloy 600 nozzles [6, 7, 30, 31].The methodology used in the fracture mechanics evaluation is described in Section 4.1, which includesfatigue crack growth of the postulated flaw into the safe end base metal. Section 4.1 also discusses thestructural integrity of the safe end base metal with the final flaw size after 40 years of fatigue crackgrowth. The crack growth an'd structural integrity results are provided in Section 4.2.4.1 METHODOLOGY In order to demonstrate structural integrity of the RCP suction nozzle safe end with the flawed partialpenetration weld for 40 years of plant operation, a crack growth evaluation is first performed for ahypothetical initial flaw encompassing the entire radial extent of the abandoned partial penetration weld.Since the actual flaw size in the weld is not available, the initial flaw size is conservatively assumed to bethe entire radial extent of the partial penetration weld, which would expose the RCP suction safe end basemetal to the reactor coolant environment.
The purpose of the fatigue crack growth (FCG) evaluation is todetermine the growth of postulated axial and circumferentially oriented flaws, which are initially the sizeof the partial penetration weld, into the safe end base metal for a service life of 40 years. The primarygrowth mechanism in ferritic steels is due to fatigue crack growth, and the FCG rate for ferritic steelmaterial in a pressurized water environment is based on the guidelines provided in Article A-4000 of theASME Section XI Code [1]. The FCG evaluation is fully discussed in Section 4.1.1. The final flaw sizeafter 40 years of fatigue crack growth is then evaluated based on the flaw size acceptance criteria ofASME Section XI, Appendix C, which is specific to the evaluation of flaws in piping.According to ASME Section III, NA-3254.
1, the boundary between the component (pump) and piping isthe limit of reinforcement not closer than the first circumferential weld joint in welded connections.
Therefore, for the purpose of the fracture mechanics evaluation contained herein, the RCP suction safeend is considered as part of the piping in accordance with ASME Section III, NA-3254.1I.
Therefore, thefinal flaw size after 40 years of fatigue crack growth is evaluated for acceptability based on the flaw sizeacceptance criteria of ASME Section XI, Appendix C, which is specific to the evaluation of flaws inpiping.The procedures of Article C-4220 of the ASME Section XI Code will be followed to determine the failuremode and analysis method. The screening criteria of Section Xl Article C-43 10 and Figure C-4220-1I WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class_ 4-4-2provide the methodology for defining the appropriate analysis method of limit load, Elastic PlasticFracture Mechanics (EPFM), or Linear Elastic Fracture Mechanics (LEFM).The calculation of the flaw growth and the acceptability of the final flaw size are based on normal, upset,emergency, faulted and test conditions based on the pressure and thermal transient stresses and weldingresidual stresses in accordance with the 2001 Edition with 2003 Addenda of the ASME Code [1 ], which isthe current code of record for Palo Verde Unit 3.4.1.1 Fatigue Crack GrowthThe fatigue crack growth analysis procedure involves postulating an initial flaw at the region of concernand predicting the growth of that flaw due to an imposed series of loading transients.
The input requiredfor a fatigue crack growth analysis is essentially the information necessary to calculate the range of cracktip stress intensity
- factors, AKt, which depends on the crack size and shape, geometry of the structural component where the crack is postulated, and the applied cyclic stresses.
The normal, test, and upset operating transients from Table 2-1 are considered in the fatigue crack growthanalysis.
The full amount of transient cycles shown in Table 2-1 is distributed equally over a plant life of40 years. The crack growth rate curves used for the ferritic steel are taken directly from Article A-4000in Appendix A of the ASME Section XI Code [1]. The crack growth rate (da/dN) is a function of theapplied stress intensity factor range (AKI) and the R ratio (Kmin/Kmax) for the transient.
The general formfor fatigue crack growth is as follows:da/dN =Co(AK1)n (in./cycle)
Where:AKI Kmax -KminR =Kmjn/Kmax (Kmin > 0)R =0 (Kmin -<0)Co = 0 for AK1 < AKthAKth =5.0(1-0.8R)
According to Article A-4000 of the ASME Section XI code, the limiting crack growth results based onusing the n and Co values for FCG in air from A-4300(b)(1) or those for water from A-4300(b)(2) shouldbe used. The FCG rates for both environments are discussed below.Fatigue Crack Growth Rate for Air (AK1 values in ksiV/i):da/dN =1.99 xl0-'° (S)(AK1)3"07 (in./cycle)
Where: S = 25.72 (2.88-R"3'07Fatigue Crack Growth Rate for Water (AK1 values in ksiVq-n):
AKknee= 17.74 (0 < R _<0.25)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-3Westinghouse Non-Proprietary Class 3 4-3AKknee= I 7.74[(3.75 R+0.06)/(26.9 R-5.725)]° 25AKknee= 12.04(0.25 < R < 0.65)(0.65 < R < 1.0)For low AK1 values (AK1 < AKknee):daldN = 1.02 xlO0-2 (S)( AK1)5"95 (in./cycle)
Where:S =1.0= 26.9 R-5.725= 11.76(0 < R < 0.25)(0.25 < R < 0.65)(0.65 < R <1.0)For high AK1 values (AK1 > AKknee):da/dN =1.01 x10-7 (S)(AK1)1.95 in/cycleWhere:S = 1.0= 3.75 R + 0.06=2.5(0 < R< 0.25)(0.25 < R < 0.65)The calculation of the stress intensity factor Kmax, Kn~ will be determined based on the discussion givenin Section 4.1.3.4.1.2 Structural Integrity of the RCP Suction Safe EndAfter the fatigue crack growth of the hypothetical flaws into the RCP suction safe end base metal hasbeen calculated, the acceptability of the final flaw size is determined based on the flaw size acceptance criteria in Appendix C of the ASME Section XI Code [1]. The first step in establishing the acceptability of the final flaw size is to determine the failure mode for the operating transients.
4.1.2.1 Determination of Failure ModeArticle C-4220 of the ASME Section Xl Code defines the procedure used in the determination of failuremode and the analysis method for ferritic piping. In accordance with Figure C-4220- 1 in the ASMESection XI Code, the Appendix C screening computations are used to determine the failure analysismethod based on limit load, EPFM, or LEFM methodologies.
The screening criteria are particularly important when metal temperatures are below the upper shelf of the Charpy Energy curve. Attemperatures above the upper shelf of the Charpy Energy curve, the evaluation would be based on EPFMsince the fracture toughness can be described with elastic plastic parameters at these higher temperatures.
Figure C-4220-1 of the ASME Section XI Code demonstrates the flow chart used with the screening criteria to select the analysis criteria.
According to the flow chart the selection of the appropriate analysismethod is as follows:SC = K'r/S'rWCAP-l 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 4-4SC < 0.2 Limit Load0.2 <SC < .8 EPFMSC > 1.8 LEFMWhere:SC = Screening
- Criteria, dimensionless K'r =Ratio of stress intensity factor to material toughness, dimensionless Sr=Ratio of applied stress to the stress at limit load, dimensionless The K'r or S'r terms are determined as follows:K'r= [1000 K2/(E'J~c)]
0"5E'=E/(1-v 2)S'r= Op/G'fWhere:K1 = Applied stress intensity factorE =Young's modulusv = Poisson's ratioJic =Measure of toughness due to crack extension Go =Primary stress= Flow stress, average of yield and ultimate strengths For the S'r term of the screening
- criteria, only primary stress should be considered as this term represents limit load due to plastic collapse.
Also, the screening criteria computations contained in Article C-4000are specific to semi-elliptical axial and circumferential flaws in a pipe; however, for the case contained herein the postulated flaws are in the shape of double corner flaws at the edge of a hole, as shown inSection 4.1.3. Therefore, the flow stress is conservatively used in the calculation of S'r since the use offlow stress, instead of stress at limit load, would result in the more conservative LEEM failure mode. Itshould be noted that in the screening
- criteria, the primary, secondary, and residual stresses are included inthe calculation of the K1 term.Additionally, yield strength values based on ASME Section XI Table C-8321-1 for circumferential flawsand Table C-8322-l for axial flaws are used in the screening criteria calculations.
Since there isinsignificant data to generate a Charpy impact energy curve based on the available Certified Material TestReport (CMTR) data, the upper shelf temperature is conservatively estimated to be at 200°F, asrecommended by Appendix C of the ASME Section Xl Code. The screening criteria are used todetermine the appropriate failure mode and analysis method for low temperature time steps in selecttransients (i.e., Heatup/Cooldown).
Above 200°F, the analysis method is based on EPEM since thefracture toughness can be described with elastic plastic fracture mechanics parameters.
The calculation of Jmc for axial and circumferentially oriented flaws is in accordance with paragraph C-8320. For axial flaws the J1.value can be estimated based on fracture toughness (K1t) as follows:WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-5Jic= 1000O(K10)2/E'The K10 value is determined based on ASME Section XI, Appendix A-4200, which provides a lowerbound approximation of fracture toughness for ferritic material.
Similarly for a circumferential flaw,paragraph C-8321I states that the Jh, value may be determined based on reasonable lower-bound fracturetoughness data. Therefore, the J10 value for use with circumferential flaws is determined in the same wayas the axial flaw Jk value. In the transition temperature region, the fracture toughness can be represented by the following equation:
K10 33.2 + 20.734 exp[0.02 (T-RTNDT)]
Where K1.is in ksivq/i, T and RTNDT are as follows:T = crack tip temperature
(°F)RTNDT = reference temperature for nil ductility transition (0F)For the RCP suction safe end, the RTNDT is 400F according to the RCP suction safe end Certified MaterialTest Report.The methodology used in the LEFM and EFPM are described in the two following sections.
4.1.2.2 Linear Elastic Fracture Mechanics The evaluation procedure and acceptance criteria used to demonstrate structural integrity of ferritic pipein the LEFM regime is contained in Appendix C, Article C-7000 of ASME Section XI Code [1]. TheLEFM evaluation is particularly important at temperatures below the Charpy upper shelf since attemperatures above the upper shelf on the Charpy Energy curve, the fracture toughness can be described with elastic plastic fracture mechanics parameters.
To determine whether a flaw is acceptable forcontinued service without repair, the acceptance criteria for normal, upset, emergency,
- faulted, and testconditions must be met. The acceptance criteria are based on the crack tip stress intensity factor, asfollows:KI < (JlcE'/1000)0.5 Which simplifies to K1 _< K10 since the K10 value determined based on ASME Section XI, Appendix A-4200 is used to calculate J10 as discussed in Section 4.1.2.1.
The determination of K1 is as follows [1 ]:KI= SFmKir+ SFbKIb+ KirWhere:K1 = Applied stress intensity factor including safety factors (Section 4.1.3)Kim = Stress intensity factor due to membrane stress (primary and secondary)
KIb = Stress intensity factor due to bending stress (primary and secondary)
Kir = Stress intensity factor due to residual stressWCAP- 1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-6S~im = Safety factor for membrane stress based on Service LevelSFb = Safety factor for bending stress based on Service LevelThe safety factors are from ASME Section XI paragraph C-2621I for circumferential flaws and C-2622 foraxial flaws and are shown in Table 4-1. Test conditions are evaluated as Service Level B in accordance with paragraph C-2620.Table 4-1: ASME Section XI, Appendix C Safety FactorsCircumferential Flaw Axial FlawService Level SFm SFb SFmA 2.7 2.3 2.7B 2.4 2.0 2.4C 1.8 1.6 1.8D 1.3 1.4 1.34.1.2.3 Elastic Plastic Fracture Mechanics The evaluation procedure and acceptance criteria used to demonstrate structural integrity of ferritic pipein the EPFM regime are contained in Appendix C, Article C-6000 of ASME Section Xl Code [1].Additionally, general EPFM evaluation procedures for ferritic components in Appendix K of ASMESection XI Code and Regulatory Guide 1.161 [8] are used. Although the original purpose of Appendix Kwas to evaluate reactor vessels with low upper shelf fracture toughness, the general approaches inparagraph K-4220 and K-43 10 are equally applicable to any region where the fracture toughness can bedescribed with elastic plastic parameters.
Therefore, the general procedures of Appendix K accompanied by Appendix C safety factors applied to the transient stresses will be used for the evaluation of the RCPsuction safe end. The safety factors in Appendix C are more conservative than those used in Appendix Kand are specific to piping. The suction safe end of the RCP has a 100% power normal operating temperature of approximately
[ ]a .... °F for consideration with the various operating transients.
Furthermore, the temperature value of [I ]a~c. 0F is considered to be sufficiently high and above theassumed upper shelf temperature of 200°F, which would thus result in ductile behavior of the material.
Therefore, the use of elastic plastic fracture mechanics method is appropriate for the majority of theoperating condition transients at high temperatures (above 200°F).For EPFM, the acceptance criteria are to be satisfied for each category of transients, namely, Service LoadLevel A (normal),
Level B (upset and test), Level C (emergency) and Level D (faulted) conditions.
Thereare two criteria that must be satisfied for ductile stability.
The first criterion is that the crack driving forcemust be shown to be less than the material toughness as follows:Japplied
< J0.1Where Japplied is the J-integral value calculated for the postulated flaw under the applicable Service Levelcondition and J0.1 is the J-integral characteristic of the material resistance to ductile tearing at a crackextension of 0.1 inch.WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-7The second criterion is that the flaw must also be stable under ductile crack growth as follows:aJpplied dJ material0a daat Japplied
= Jmaterial Where:Jmateria1 i -integral resistance to ductile tearing for the material0Japplied e -Partial derivative of the applied i-integral with respect to flaw depth, adJm"aterial
-Slope of the J-R curvedaMaterial Resistance J-R CurveOne of the most important pieces of information for fracture toughness for pressure vessel and pipingmaterials is the J-R (or J~n~taeiai) curve of the material.
The "J-R" stands for material resistance to crackextension, as represented by the measured J-integral value versus crack extension.
Simply put, the J-Rcurve to cracking resistance is as significant as the stress-strain curve to the load-carrying capacity and theductility of a material.
Both the J-R curve and stress-strain curves are properties of a material.
Methods are available in NUREG/CR-5729
[9] that can generate J-R curves from available data such asmaterial chemistry, radiation
- exposure, temperature, and Charpy V-notch energy. The method provided in[9] summarizes a large collection of test data, and presents a multivariable model based on advancedpattern recognition technology.
Separate analysis models and databases were developed for different material groups, including reactor pressure vessel (RPV) welds, RPV base metals, piping welds, pipingbase metals and a combined materials group. For the evaluation herein, Jmateriai curves based on pipingbase metals in NUREG/CR-5729 will be used since it is the most appropriate representation of the RCPsuction safe end material.
The material resistance, Jmnaterial, is fitted into the following equation
[8, 9]:Jmaterial
= (MF)CI1(Aa)c 2 exp [C3 (Aa)c4]Where, CI, C2, C3, and C4 are fitting constants, and Aa is crack extension.
For the piping base metalmodel, the constants C1, C2, C3, and C4 are calculated based on the a, and d1 constants from Table 13 of[9], which are defined below:lnC1l=a1 +a21nCVN+a3T+a41n B.C2 =d1 + d2lnC1l+d3In B,C3 =d4 +d5 lnC1 +d6 lnB.WCAP- 1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-8C4 =dWhere,T =Temperature
(°F)Bn = Sample thickness (inches),
conservatively taken as 1.0" per Reg. Guide 1.161 [8]CVN = Charpy impact energy (fi-Ibs)Neutron irradiation has been shown to produce embrittlement that reduces the toughness properties of thereactor vessel ferritic steel material.
The irradiation levels are very low in the RCP region and therefore the fracture toughness will not be measurably affected.
It should be noted that Margin Factors from Reg. Guide 1.161 [8] are included in the Jmaterial curve asfollows:MF =0.749 for Service Levels A, B and CME = 1.0 for Service Level DApplied J-curveFor small scale yielding, Japplied of a crack can be calculated by the Linear Elastic Fracture Mechanics method based on the crack tip stress intensity factor, K1, calculated as per Section 4.1.3. However, aplastic zone correction must be performed to account for the plastic deformation at the crack tip similar tothe approach in Regulatory Guide 1.161 [8]. The plastic deformation ahead of the crack front is thenregarded as a failed zone and the crack size is, in effect, increased.
Residual stresses are not considered in the EFPM evaluation in accordance with the document EPRI NP-6045 [10], which is the technical basis for the evaluation of flaws in ferritic piping (ASME Section XIAppendix C). According to [ 10], the residual stress can be neglected since experimental results from pipetests show no evidence of residual stress effects on maximum load carrying capacity.
Furthermore, thetechnical basis in EPRI NP-6045, Section 2-2.1, states that the conservatism included in evaluation procedures adequately account for any residual stress influence in the ductile tearing mode, and theexplicit residual stress effects need not be included in the EPFM analysis.
Additionally the technical basis for ASME Code Case N-749, PVP2012-78 190 [ 11], which provides EPFM evaluation methodology for ferritic steel components, also confirms that residual stress should not be considered in EPFMevaluations.
PVP2012-78190 states that cleavage
- failure, such as that of LEFM, is not an applicable failure mode when operating at the upper shelf, where the use of residual stresses can be overlyconservative.
Thus continuing with the evaluation procedures, the Ki-values can be converted to Japplied by the following equation:
applied-g'Where Kep is the plastic zone corrected K-value, and E'=E/(1-v
- 2) for plane strain, E = Young's Modulus,and v = Poisson's Ratio. Kep is the elastically calculated K1-value based on the plastic zone adjustedcrack depth or size. The plastic zone size, rp, is calculated byWCAP- 18051 -NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-4-9rp = Where, Sy, is the yield strength of the material.
It should also be noted that safety factors from C-2620 areincluded on the transient stresses used in the calculation of stress intensity factors per ASME Section XI,Appendix C. The calculation of stress intensity factors are discussed in Section 4.1.3.4.1.2.4 Primary Stress LimitIn addition to satisfying the fracture
- criteria, the primary stress limit of the ASME Code Section III,paragraph NB-3 000 must be satisfied.
The effects of a local cross-section area reduction that isequivalent to the area of the postulated flaw in the RCP suction safe end attachment weld must beconsidered by increasing the membrane stresses to reflect the reduced cross section.
Membrane stressesin a thinned area of base metal due to the crack can be treated as a local primary membrane stress with anincreased allowable stress intensity.
The typical sizing is performed on the basis of the primarymembrane stress intensity being less than Smn; however since the reduction in thickness is local, thepermissible stress intensity is increased by 50%. This procedure is in accordance to the sizing calculation performed for WCAP- 15973-P-A
[5].4.1.3 Generation of Stress Intensity FactorsSince the size of the actual indication(s) in the attachment weld was not detected at the time of the repair,a hypothetical flaw that extends radially over the entire Alloy 82/182 partial penetration weld isconservatively assumed.
Flaws are projected in the axially and circumferentially oriented directions.
Thestress intensity factor expression for two corner flaws emanating from the edge of a hole in a plate fromAnnex C.4.4 of [12] is used in determining the stress intensity factor for the postulated flaw in the Alloy82/182 partial penetration weld. The stress intensity factor can be expressed in terms of the membraneand bending stress components as follows:K1 = (Mm (OIm +- Pc) + Mb Ob) (2ta/Q)"/
2Where:am = Remote Membrane Stress Component=Remote Bending Stress Component Pc =Crack face pressureMm =Boundary Correction Factor for remote membrane
[12]Mb ---Boundary Correction Factor for remote bending [12]Q --Shape Factor per [12]a =Depth of the corner flaw (See Figure 4-1)Use of this method requires that the stresses be resolved into membrane and bending stress components.
Stresses are resolved into membrane and bending components by first fitting the stresses to a 4th orderpolynomial as shown in Annex C.2.2.3 of [12]. Reference
[12] calls for the use of remote membrane andbending stresses for use with the stress intensity factor expression due to stress concentration actingaround the hole. Only primary stresses are affected by the stress concentration of the hole, therefore WCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Propdetary Class 34-10remote primary membrane and bending stresses are used from the appropriate remote paths for the axialand circumferential flaw evaluations.
Thermal transient and residual stresses from the paths at thelocation of the flaw are utilized in the calculation of stress intensity factors.The stress intensity factor expression in [12] is applicable for a range of flaw shapes, with the depth of theflaw defined as "a", and the width of the flaw defined as "c", as shown in Figure 4-1. The corner cracksreflected in the axial and circumferential orientations are demonstrated in Figure 4-2 and Figure 4-3,respectively.
The attachment weld shapes were based on the weld geometry shown in the RCP drawingsin [19c] and [19d]. The nearest structural discontinuity to the nozzle is the pump reinforcement and it isused to determine the "W" term in the stress intensity factor calculations.
The RCP suction safe endinstrumentation penetration diameter (2R) = [ ]ac~e inch according to [19d].The use of a plate model is acceptable since the lengths of the assumed flaws are small compared to thecircumference of the pipe. Similar stress intensity factor databases based on plate geometry were alsoused in the determination of stress intensity factors in WCAP-15973-P-A
[5].cFigure 4-1: Corner Crack GeometryFigure 4-2: Axial Flaw GeometryWCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-11Westinghouse Non-Proprietaiy Class 3 4-IlFigure 4-3: Circumferential Flaw GeometryWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 3 414-124.1.4 Transient Stress AnalysisIn determining the acceptability of abandoning the flawed attachment weld in the RCP suction safe end, itis essential that all applicable loadings be considered.
The first step of the evaluation is to determine thetransient loading at the location of interest and, therefore, all the applicable pressure/thermal transients forthe normal, upset, emergency,
- faulted, and test conditions must be considered.
The applicable pressure/thermal transients and the corresponding transient cycles for the RCP suction safe end arediscussed in Section 2.4. The corresponding design temperature and pressure transient curves are used indeveloping the time history through-wall pressure/thermal transient stress which is used as input to thefracture mechanics evaluation.
Transient stresses are determined based on the finite element analysis determined in Section 2, whichmodeled the area of interest in the RCP suction safe end. The model included the safe end base metal,Alloy 82/182 partial penetration weld, Alloy 600 instrumentation nozzle, Alloy 690 half-nozzle, 52Moutside surface replacement weld, and the cladding.
The safe end finite element model is shown in Figure2-19. Stress contour plots of the limiting transients are provided in Section 2.7.A total of 24 paths were used in the FEA model to extract transient
- stresses, which are shown in Figure2-19. Paths 13 through 24 are reflections of Paths 1 through 12 across the instrumentation nozzle axisand will not be used since the resulting stress is similar to Paths 1 through 12. The paths used in theevaluation contained herein are Paths 1, 2, 5, 6, 7, 8, 11, and 12. Together Paths 1-2, 5-6, 7-8, and 11-12are co-linear.
Paths 1-2 and 7-8 are at the location of the welds and Paths 5-6 and 11-12 are remote fromthe welds. Paths 3-4 and 9-10 are not used since the stress intensity factors at these locations are not aslimiting as those at Paths 1-2 and 7-8, respectively.
It should be noted that evaluation results using Paths3-4 and 9-10 were reviewed for thoroughness, and found to be not limiting.
Hoop stress from Paths 1-2and 5-6 are used for the axial flaw evaluation, and axial stress from Paths 7-8 and 11-12 are used for thecircumferential flaw evaluation.
Since the stress intensity factor definition from [12] calls for remotestresses to be used for mechanical loads, Paths 5-6 and 11-12 are used when calculating primary loadingstress intensity factors.
Paths 1-2 and 7-8 are used when calculating secondary loading (thermal transient) stress intensity factors.All of the transients for normal, upset, faulted and test conditions are evaluated for the fracture mechanics evaluation as shown in Table 2-1. The Hydrostatic Test transient is also evaluated;
- however, since PaloVerde Unit 3 is already in operation, all hydrostatic tests must be in accordance with IWB-5000 of theSection Xl ASME Code [1], which does not allow for hydrostatic tests of [ ]a~ce psia. Therefore, amaximum pressure of [ ]a'c'e psia is used in the Hydrostatic Test transient.
The Hydrostatic Testthermal transient stress is assumed to be the same as the Leak Test thermal transient stress since thetemperature variation would be the same.WCAP- 18051INP October 201!5Revision 0
Westinghouse Non-Proprietary Class 3 414-134.1.5 Welding Residual Stress AnalysisFor the fracture mechanics evaluations, the initial postulated flaws were assumed to extend completely through the depth and width of the i-groove welds and through the nickel alloy buttering.
The flawgeometry is thus conservatively considered as two corner cracks emanating from the edge of a hole inplate as shown in Figure 4-1.Based on the welding residual stresses assessment provided in Section 3.2 of WCAP-15973-P-A
[5], itwas determined that for such a hypothetical large flaw configuration as described above, the residualstresses will not be present at the tip of the crack at the interface between the weld metal and carbon steelinterface.
During fabrication, the RCP safe end material was heat-treated after the buttering and prior tocompletion of the nozzle partial penetration weld; therefore, any welding residual stresses during thefabrication would be relieved at the butter to base metal interface.
During the welding of the partialpenetration weld, several layers of weld metal are typically deposited to develop the weld geometry ofinterest, each layer, after the initial layer of weld metal has the effect of reducing the residual stresses inthe previous layers, thereby significantly reducing the residual stresses not only in the weld itself but alsoat the butter-base metal interface.
Furthermore, any remaining high stressed locations in the buttering forthe instrument nozzles will be removed by the grinding used to prepare the surface for dye penetrant inspection and for finishing the weld preparation, thus resulting in even lower stresses in the buttering.
Additionally, since residual stress is a displacement controlled load, the stresses resulting from theoriginal welding process would decrease with the introduction of a hypothetical flaw completely throughthe i-groove weld. Also, any crack growth into the carbon steel suction nozzle safe end will furtherrelieve the residual stresses.
- However, for a conservative fracture mechanics evaluation, finite element welding residual stress analysiswas performed in [13] using the Palo Verde Unit 3 specific RCP suction safe end configuration.
Thewelding residual stress evaluation utilizes a 3-dimensional model of the safe end base metal, Alloy 82/182partial penetration weld, Alloy 600 instrumentation nozzle, Alloy 690 half-nozzle, 52M outside surfacereplacement weld, and the cladding.
The welding residual stress evaluation is performed by firstmodeling the welding of the instrumentation nozzle to the RCP suction safe end. Hydrostatic testing andnormal operating conditions are then applied to the safe end before the half-nozzle repair is simulated inthe model. The Alloy 82/182 partial penetration weld is simulated with a single weld pass of buttering followed by four equal volume weld passes. The 52M repair weld is simulated with three weld passes ofroughly equal volume.A total of twelve stress paths were used to present the residual stress data. Six paths each are on the axialand radial cross-sections as shown in Figure 4-4, each path is comprised of 21 points through the wallthickness.
Paths 1, 2, 7, and 8 are utilized since these paths represent the local residual stresses at thedeepest portion of the original weld. Paths 1 and 7 extend from the inside surface through the originalattachment weld while paths 2 and 8 extend from the deepest extent of the original attachment weld,through the repair weld, to the outside surface.
Together Paths 1-2 and 7-8 are co-linear.
Paths 1-2 areused to obtain hoop welding residual stress for an axial flaw evaluation, and Paths 7-8 are used to obtainaxial welding residual stresses for a circumferential flaw evaluation (see Figure 4-4). Stresses at Paths 3-4 and 9-10 were also investigated and found to be less limiting for the calculation of stress intensity WCAP-1 8051 -N P October 2015Revision 0
Westinghouse Non-Proprietary Class 34-14Wesigos No-rpitr Cls 34factors than Paths 1-2 and 7-8, respectively.
The hoop and axial residual stress contour plots are shown inFigure 4-5 and Figure 4-6, respectively.
The hoop and axial residual stress profiles at Paths 1-2 and 7-8are shown in Figure 4-7 and Figure 4-8 respectively, and are denoted by the curve labeled "Analytical Residual Stress Profile [1 3]".The analytical welding residual stresses are used in the fatigue crack growth and the structural integrity evaluation of the final flaw size for the LEFM calculations.
- However, based on engineering experience, the analytical welding residual stress evaluation are conservative as compared to actual welding residualstresses as discussed above in this section, particularly in the original Alloy 82/182 attachment weld. Thewelding residual stresses in the region of the original attachment weld are also beyond the yield strengthof the material; therefore, it is appropriate to reduce the residual stresses to account for the plasticity ofthe material.
Also as discussed above, the residual stress is a displacement controlled load, therefore, theresidual stresses resulting from the original weld would decrease as a result of the postulation of a largeinitial flaw size and the subsequent flaw growth into the base metal. Therefore, in the LEFM analysis ofselect time steps at the beginning of heatup (time step =1 second) and end of cooldown (time steps =16664 seconds through 36000 seconds) where the fluid temperature is 70*F, the analytical weldingresidual stresses are reduced in the original attachment weld as shown in Figure 4-7 and Figure 4-8 toreduce over-conservatism.
It is noted that the welding residual stresses are only reduced in the originalAlloy 82/182 attachment weld, and the residual stresses through the remaining wall thickness areconservatively left unaffected.
The reduced residual stress profile is used in only the LEFM fracturemechanics evaluation, and only at the select time steps mentioned above, to reduce conservatism in thewelding residual stress profile through the original Alloy 82/182 attachment weld. The fatigue crackgrowth evaluation and all other time steps of the LEFM analysis are based on the full analytical residualstress profiles from Figure 4-7 and Figure 4-8.WCAP- 18051I-NP October 2015Revision 0
WestinRhouse Non-Proprietary Class 34-15Westinghouse Non-Proprietary Class 3 4-15Figure 4-4: Residual Stress Evaluation Cut Paths 1131(Viewed at 45° Angle to Axial Cut Plane)WCAP- ! 805 I-NPOctober 2015Revision 0
v ._4-16Westinghouse Non-Proprietary Class 3 4-16-ia,c,eFigure 4-5: Residual Hoop Stress Results (psi) [13]WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 414-17a,c,eFigure 4-6: Residual Axial Stress Results (psi) [13]WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 414-18a,c,eFigure 4-7: Through-Wall Welding Residual Hoop Stress Profile [13]* Note that the residual stresses shown are through the entire wall thickness including the originalattachment weld and the repair weld. Residual stresses beyond the original attachment weld areconservatively equal to the unreduced analytical residual stress profile [113].WCAP- 1805 1-NPOctober 201l5Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 4-19a~ceFigure 4-8: Through-Wall Welding Residual Axial Stress Profile [13]* Note that the residual stresses shown are through the entire wall thickness including the originalattachment weld and the repair weld. Residual stresses beyond the original attachment weld areconservatively equal to the unreduced analytical residual stress profile [1 3].WCAP-1805 I-NP October 2015WCAP-18051-NP Revision 0
Westinghouse Non-Proprietary Class 3 424-204.2 FRACTURE MECHANICS EVALUATION RESULTSA fracture mechanics evaluation is performed to demonstrate structural integrity of the RCP suctionnozzle safe end with the flawed partial penetration weld for 40 years of plant operation.
First a crackgrowth evaluation is performed for hypothetical initial flaws encompassing the entire radial extent of theabandoned partial penetration weld for growth into the RCP suction nozzle safe end due to the fatiguecrack growth mechanism.
Flaws are projected in the axially and circumferentially oriented directions forevaluation.
The allowable flaw size criteria of Section XI, Appendix C of the ASME Code are then usedto demonstrate that the final flaw sizes after 40 years of crack growth continue to meet the ASME Codemargins.
The results of the fatigue crack growth and structural integrity analysis are provided in Section4.2.1 and 4.2.2 below based on the methodology discussed in Section 4.1.4.2.1 Fatigue Crack Growth Evaluation A fatigue crack growth analysis is performed according to the methodology in Section 4.1.1 to determnine the final depth that the hypothetical postulated flaw in the RCP suction safe end instrumentation nozzlepartial penetration weld would grow to after 40 years of operation.
An operation duration of 40 yearsconservatively envelops the remaining operating life for Palo Verde Unit 3, including the LicenseRenewal period.Stress intensity factors based on a double corner cracked hole in a plate are first calculated for a range offlaw sizes based on primary, secondary, and residual stresses in the region of the attachment weld. Sincethere was leakage detected on the outside surface on the RCP suction safe end, the evaluation contained herein assumed that the initial flaw size radially encompasses the entire original attachment weld.Therefore, the initial postulated flaw will have a depth which extends through the Alloy 82/182 partialpenetration weld to the base metal interface and a length equal to the width of the original weld prep.Flaws are projected in the axially and circumferentially oriented directions for evaluation and therespective stresses normal to the crack plane are used in the analysis.
Crack growth is determined for thisinitial flaw due to the fatigue crack growth mechanism for a total of 40 years into the safe end base metal.The final flaw size with FCG will then be used to determine structural stability based on ASME SectionXl, Appendix C.In accordance with the stress intensity factors database for a double comer cracked hole in a plate, remoteprimary stresses are used in the calculation of the stress intensity factors to account for stressconcentration around the penetration.
Therefore, for the axial flaw projection, remote stresses at Paths 5-6 (Figure 2-19) of the transient stress model are used in the calculation of primary stress intensity factors.Similarly, for the circumferential flaw projection, remote stresses at Paths 11-12 (Figure 2-19) of thetransient stress model are used in the calculation of primary stress intensity factors.
Alternately, the stressintensity factor calculations for secondary and residual stresses utilized stresses at the location of theassumed flaw (Paths 1-2 for axial flaw and Paths 7-8 for circumferential flaw from Figure 2-19 andFigure 4-4).The stress intensity factors used to calculate crack growth are determined at both the deepest point in thecrack ($ = 90°) and the surface point of the crack ($ 00), and the limiting of the two are used todetermine the final flaw size. In the FCG evaluation, the flaw depth to flaw width ratio is held constantWCAP- 1 8051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-21through the crack growth calculation.
The complete design cycles from Table 2-1 are conservatively usedin the EGG evaluation, even though the license renewal application demonstrates that the expected cyclesfor Palo Verde are projected to be less than the full count of the design cycles [14].The crack growth results are shown in Table 4-2 for the axial and circumferential flaw configurations.
The final flaw sizes after 40 years of operation are then used to determine the acceptability of continued operation of the Palo Verde Unit 3 RCP suction safe end as discussed in 4.2.2 below.Table 4-2: Fatigue Crack Growth ResultsFlaw Initial Flaw Flaw Depth Including FCGConfiguration Depth 10 Years 20 Years 30 Years 40 Years(in.) (in.) (in.) (in.) (in.)Axial Flaw [Circumferential Flaw ] a,c,e4.2.2 Final Flaw Stability Evaluation 4.2.2.1 Screening CriteriaArticle C-4220 of the ASME Section XI Code defines the procedure used in the determination of failuremode and the analysis method. In accordance with Figure C-4220-1 in the ASME Section Xl Code, theAppendix C screening computations are used to determine the appropriate ferritic piping analysis methodusing limit load, EPFM, or LEFM methodologies.
The screening criteria (SC) are particularly important when metal temperatures are below the upper shelf of the Charpy Energy curve. Based on Article C-8000of the ASME Section XI Code, in the absence of material specific data, an upper shelf temperature of200°F shall be conservatively used. Therefore the screening criteria are used for all transients whichexperience transient temperatures below 2000F to determine the appropriate failure mode and analysismethod. Once a transient experiences temperature above the upper shelf, the evaluation will beperformed with respect to the EPFM methodology since the ferritic safe end would be at the upper shelfof the Charpy Energy curve and have sufficient ductility where structural stability can be determined based on EPFM.The only Palo Verde Unit 3 transients that experience temperatures below 200°F are Heatup, Cooldown, Hydrostatic Test, and Leak Test. According to the piping design specification
[23], at the beginning of theHeatup transient and at the end of the Cooldown transient, the temperature is [ ]a~ce 0F and the pressureis [ ja'c'e psia. However, based on the Palo Verde Pressure-Temperature Limits in the Technical Requirements Manual [15], the maximum pressure at the beginning of Heatup or end of Cooldown islimited to [ ]a~ce psia. Therefore, for the beginning of Heatup or end of Cooldown a maximum pressureof [ ]a,c,e psia is used in the screening evaluation.
For all instances of the Heatup, Cooldown, Hydrostatic Test, and Leak Test transients where the transient temperature is below 200°F, the ASME Section XI Article C-4000 screening criteria resulted in valuesgreater than SC = 1.8 based on the calculations described in Section 4.1.2.1I.
Therefore, the more limitingWCAP- 18051I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-22LEFM methodology will be used in determining the acceptability of the final flaw size for all instances ofthe Heatup, Cooldown, Hydrostatic Test, and Leak Test transients where the transient temperature isbelow the assumed Charpy upper shelf temperature (200°F).
The screening criteria results for the mostlimiting time steps of each transient are shown in Table 4-3.Table 4-3: Screening Criteria Results for Limiting Transient Time StepsTransient Limiting Time Step Axial Flaw Circumferential Flaw(sec.) SC SCHeatup 3600 2.2 4.0Cooldown 13680 2.2 3.4Leak Test 61200 4.3 8.3Hydrostatic Test 61200 4.0 7.64.2.2.2 Linear Elastic Fracture Mechanics As discussed above, the LEFM methodology is used to evaluate transients that operate below the assumedCharpy upper shelf temperature of 200°F, which are notably Heatup, Cooldown, Hydrostatic Test, andLeak Test. The final flaw sizes after 40 years of FCG, as determined in Table 4-2, are then evaluated todetermine acceptability based on the LEFM procedure of Section 4.1.2.2.Stress intensity factors are determined using the primary and secondary transient stresses and weldingresidual stresses as discussed in Sections 4.1.4 and 4.1.5. The stress intensity factor database based on adouble corner crack in a plate with a hole is used as discussed in Section 4.1.3.Also as discussed above in Section 4.2.2.1, for the LEFM evaluation at the beginning of Heatup and at theend of Cooldown, a maximum pressure of [ ] a°c* psia is used in determining the stress intensity factorfor the primary pressure loading.The RCP design specification in [22] shows the Hydrostatic and Leak Test transient reaching atemperature as low as [ ]aca 0F while the pressure is still elevated
([ ]a~c# psia for Hydrostatic and[ ]ace psia for Leak Test). According to the Palo Verde Pressure-Temperature Limits in the Technical Requirements Manual [151, the pressure of the Hydrostatic/Leak Test transient may not increase above[ ]"c... psia unless the temperature is above [ ]ae ....F. For the pressure in the Hydrostatic/Leak Testtransients to be [ ]a'c'e psia the temperature would have to be greater than [ ]a'c'e 0F.Therefore, for Hydrostatic and Leak Test transients, when the pressure is greater than [ ]a"c¢e psia, atemperature of [ 0F is used in the LEFM evaluation.
For the evaluation of axial flaw, LEFM calculations were performed for a flaw depth of [ ]a,c,e in.,which is the predicted final flaw depth after 40 years of fatigue crack growth from Table 4-2. A LEFMfracture mechanics evaluation was performed for all Heatup, Cooldown, Hydrostatic Test, and Leak Testtransient time steps with a temperature below 200°F and the most limiting results for each transient areshown in Table 4-4. The safety factors from paragraph C-2622 for axial flaws are included on the stressWCAP- 18051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 34-23intensity factors due to primary transient stress intensity factors per Appendix C-7000 of the ASMESection XI Code. There are no safety factors applied to the residual stress intensity factors according toAppendix C-7000 of the ASME Section XI Code.For the circumferential flaw evaluation, LEFM calculations were performed for a flaw depth of [ ]a..in., which is the predicted final flaw depth after 40 years of fatigue crack growth from Table 4-2. ALEFM fracture mechanics evaluation was performed for all Heatup, Cooldown, Hydrostatic Test, andLeak Test transient time steps with a temperature below 2000F and the most limiting results for eachtransient are shown in Table 4-5. The safety factors from paragraph C-2621I for circumferential flaws areincluded on the stress intensity factors due to primary and secondary transient stress intensity factors perAppendix C-7000 of the ASME Section XI Code. There are no safety factors applied to the residualstress intensity factor according to Appendix C-7000 of the ASME Section XI Code.The results in Table 4-4 and Table 4-5 are based on stress intensity factors from the deepest extent of theflaw. The results based on stress intensity factors at the deepest extent of the flaw were found to be morelimiting than those at the surface point of the flaw. Based on the structural integrity results for axial andcircumferential flaws in Table 4-4 and Table 4-5, the final flaw sizes after 40 years of crack growth areacceptable for continued operation based on the LEFM evaluation.
WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-24Table 4-4: LEFM Results for Axial Flaw____(Flaw Depth= ]a .... in.)Transient Time Temp K1p Ki Klr KItotai ~ Kltotal / KIc(sec.) (0F) (ksi'lin)
(ksi~in)
(ksi'lin)
(ksi'in)
Heatup 1ICooldown 16664Leak Test 63000Hydro Test 63000 ]ac~eeTable 4-5: LEFM Results for Circumferential FlawFlw eth = [ ]a~c~e in.) ______Transient Time Temp Kipm Kipb KIsm KIsh Kir KItotal Kit Kitotai / K1c(sec.) (0F)
(ksi~in)
(ksi'Iin)
(ksi'Iin)
(ksi'iin)
(ksi'Iin)
Heatup 1 ICooldown 16664Leak Test 63000Hydro Test 63000 ] a,c,eWCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class34-254.2.2.3 Elastic Plastic Fracture Mechanics Based on the Screening Criteria discussed in Section 4.2.2.1 all transients that operate above the Charpyupper shelf temperature of 200°F are evaluated using the EPFM methodology discussed in Section4.1.2.3.For the J-integral calculation, the key aspects of the analysis is to demonstrate that the magnitude of Jappliedis less than Jmater-ial at 0.1 inch crack extension, and the slope of the imateria curve is greater than the slope ofthe Japplied curve at the intersection of the Jmaterial and Japplied curves. In order to determine the Japplied curve,the stress intensity factor, KI, must be calculated based on the procedure shown in Section 4.1.3 for adouble comer crack geometry for the applicable attachment weld geometry.
The most severe transients were evaluated since they will provide the highest combination of bending andmembrane stresses from all transient time steps, which results in a limiting Jappliecd curve. Additionally, theJmaterial curves decrease at higher temperatures so transients with severe stress at higher temperatures would be limiting.
Step Load Increase, Reactor Trip, and Loss of Secondary Pressure were selected sincethey were determined to result in the most limiting stress intensity factors for Normal, Upset, and Faultedconditions.
It should be noted that all transients were considered in the EPFM evaluation.
In accordance with the stress intensity database from Section 4.1.3, remote membrane and bendingstresses are used in the stress intensity factor calculations for primary stress to account for the influence ofthe stress discontinuity of the penetration hole near the stress cut. Secondary thermal transient stressesfrom path locations near the flaw are used in the stress intensity factor calculations.
Residual stresses arenot considered in the EFPM evaluation in accordance with the EPRI NP-6045 [10] and as discussed inSection 4.1.2.3.Safety factors from Paragraphs C-2621 and C-2622 of the ASME Section XI Code, as shown in Table 4-1,are included in the stress intensity factors used in the EPFM evaluation.
The safety factors are included inboth the primary and secondary stress intensity factors used in the calculation of Japplied-The EPFMevaluation was performed for the deepest extent of the flaw since it was determined that the stressintensity factors at the deepest extent were more limiting than those at the surface point of the flaw.The Jmaterial is determined based on the methodology in Section 4.1.2.3 from Reg. Guide 1.161 [8] andNUREG/CR-5729
[9]. For a conservative
- analysis, the CVN value used in the calculation of imateria1 is thelowest of the six Charpy Impact tests from the CMTR at l00*F ([ ]a~'~ ft.-lbs.).
The RCP suction safeend CMTR does not provide sufficient data to generate the full Charpy Energy curve; therefore, it isconservatively assumed that the CVN values at a test temperature of 1 00*F represent the upper shelf eventhough the upper shelf temperature is not known and would be higher. The material resistance i-value,Jmaterial, is calculated using the maximum temperature from each transient.
The higher temperature leads toa more limiting Jmaterial curve. The thickness of the safe end base metal is [ ]a~C, inches; however, aconservative value of Bn 1.0 inch is used to be consistent with the Reg. Guide 1.161 [8]. Based onReg. Guide 1.161, an MF =0.749 is used for Levels A and B transients and an MF = 1.0 is used for LevelD transients.
Young's Modulus, E, and yield strength are from ASME Section III material properties forSA-508, Class 1 at the maximum transient temperature.
WCAP-1805 1-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-26Once the Japplied and Jmaterial are calculated, flaw stability is determined based on the J-R curves for the PaloVerde Unit 3 RCP suction safe end material as shown in Figure 4-9 through Figure 4-14 and Table 4-6.These results represent the most limiting transients for each service condition for both axial andcircumferential flaw orientations.
Based on the J-R curves, at a crack extension of 0.1 in., the Jmaterial curve is greater than the Japplied curve for all transients.
Additionally, at the point of intersection betweenthe Japplied curve and Jmaterial curve, the slope of the imaterial curve is greater than the slope of the Japplied curve.Therefore, the final flaw sizes after 40 years of crack growth are acceptable for continued operation basedon the EPFM evaluation.
Table 4-6: EPFM Results for Axial and Circumferential Flaws at 0.1" Crack Extension Axial Flaw Circumferential FlawTransient J]applied Jmaterial Japplied Jmaterial
_________________
(kip-in/in
- 2) (kip-in/in
- 2) (kip-in/in
- 2) (kip-in/in 2)Step Load Increase
[_____Reactor TripLoss of Secondary Pressure
]_____ a,c,e-Ia,c,eFigure 4-9: EPFM Evaluation Results for Axial Flaw -Step Load Increase Transient (Normal Condition
-Level A)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-27Westinghouse Non-Proprietary Class 3 4-27a,c,eFigure 4-10: EPFM Evaluation Results for Axial Flaw -Reactor Trip Transient (Upset Condition
-Level B)WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 424-28_aceeFigure 4-11: EPFM Evaluation Results for Axial Flaw -Loss of Secondary PressureTransient (Faulted Condition
-Level D)WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-29Westinghouse Non-Proprietary Class 3 4-29a,c,eFigure 4-12: EPFM Evaluation Results for Circumferential Flaw -Step Load IncreaseTransient (Normal Condition
-Level A)WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-30Westinghouse Non-Proprietary Class 3 4-30a,c,eFigure 4-13: EPFM Evaluation Results for Circumferential Flaw -Reactor Trip Transient (Upset Condition
-Level B)WCAP- 1805 I-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 34-31Westinghouse Non-Proprietary Class 3 4-31a,c,eFigure 4-14: EPFM Evaluation Results for Circumferential Flaw -Loss of Secondary Pressure Transient (Faulted Condition
-Level D)WCAP- 18051 -NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3 434-324.2.2.4 Primary Stress LimitThe primary stress calculation is shown in Table 4-7 based on the calculation procedure in ASMLE CodeSection III, paragraph NB-3000 [2]. The typical sizing is performed on the basis of the primarymembrane stress intensity being less than Sm, however since the reduction in thickness is local theallowable stress intensity, Sm, is increased by 50%. This procedure is similar to the sizing calculation performed for WCAP-15973-P-A
[5]1.The largest flaw size after crack growth for either the axial or circumferential flaw is used in the primarystress limit evaluation to envelop all results.
It should be noted that the final flaw depths shown in Table4-2 include the cladding thickness which must be disregarded in the primary stress limit calculation.
Therefore, the cladding thickness is subtracted from the flaw depth to represent the depth into the basemetal only. As shown in Table 4-7 the limiting final flaw depth is acceptable with respect to the primarystress limit._________
Table 4-7: Palo Verde Unit 3 RCP Suction Safe End Primr Sress Limit ______Outside Total Flaw Flaw Depth into Remaining Base Hoop Radial Stress 1.5"SmRadius Depth"L)
Base Metal(2) Metal Thickness Stress Stress Intensity (in.) (in.) (in.) (in.) (ksi) (ksi) (ksi) (ksi)a]~Notes:(1) Final flaw depth from Table 4-2 for either axial or circumferential flaw.(2) Thickness of base metal only, without cladding.
WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class34-334.2.3 Corrosion A general corrosion assessment of the nozzle bore diameter was performed in [16] for the half-nozzle repair one-cycle evaluation.
The assessment in [16] determined the allowable increase in the diameter ofthe carbon steel safe end attachment nozzle bore due to corrosion of the pipe base metal would be at least[ ]a,c,e inches. The allowable diametrical hole increase of [ ]a .... inches was therefore compared tothe corrosion growth of the bore hole calculated for 40 years.The corrosion rate for a carbon steel material (such as that of SA-508, Class 1) for the Palo Verde Unit 3RCP suction safe end is provided in [5]. The corrosion rate in [5], applicable to the half-nozzle creviceregion, is provided for three separate operating conditions:
full power operation, startup mode (assumedto be at intermediate temperature with aerated primary coolant),
and refueling mode (100°F with aeratedprimary coolant).
Arizona Public Service has committed to track the time at cold shutdown in theprevious relief requests for hot leg Alloy 600 small-bore nozzle repairs in order to provide assurance thatthe allowable hole diameter is not exceeded over the life of the plant [ 16].An overall corrosion rate was then determined based on the corrosion rates of the individual operating modes and the percentage of time spent in each mode. The calculated corrosion rate for Palo Verde Unit3 was determined to be 1.53 mils per year (mpy) [16]. For a conservative operation period of 40 years,the total corrosion of the nozzle bore would be:Corrosion
=(1.53 mpy)(40 years) = (0.00153 in/yr)(40 yrs)= 0.06 12 inches (radially, relative to penetration)
-- 0.1224 inches (diametrically, relative to penetration)
Since the expected corrosion in 40 years is only 0.1224 inches diametrically, the diameter of the borewould remain acceptable for the next 40 years of operation.
WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class34-344.3 FRACTURE MECHANICS SUMMARY AND CONCLUSIONS A fracture mechanics evaluation is performed to provide the technical basis for continued operation of thePalo Verde Unit 3 RCP suction safe end with a flawed instrumentation nozzle attachment weld. Flawgrowth and stability evaluations were performed based on ASME Section Xl to determine theacceptability of performing a half-nozzle repair and abandoning the flawed attachment weld for 40 yearsof plant operation.
Acceptability of a flaw can be determined by first determining the amount of growththe hypothetical flaw would experience for the remaining life of the plant (40 years) and then verifying that the final flaw size after 40 years meets the acceptance criteria of ASME Section XI, Appendix C forferritic piping.Since the flawed location has not been inspected, the initial flaw size is conservatively assumed to be theentire radial extent of the partial penetration weld, which would expose the RCP suction safe end basemetal to the reactor coolant environment.
Flaw growth of this initial flaw size is performed for the RCPsuction nozzle safe end due to the fatigue crack growth mechanism.
The purpose of the flaw growthevaluation is to determine the growth of hypothetical postulated axial and circumferentially oriented flawsinto the safe end base metal for a service life of 40 years. The allowable flaw size criteria of Section XI,Appendix C of the ASME Code are then used to demonstrate that the growth of the flaw in the originalpartial penetration weld into the safe end base metal remains acceptable for the remaining life of the plant.The flaw growth evaluation is performed in Section 4.2.1 for axially and circumferentially orientedpostulated flaws encompassing the original attachment weld. Flaw stability calculations are performed inSection 4.2.2 and demonstrate that the final flaw size from the flaw growth evaluation is acceptable according to the standards of the ASME Code. Based on the evaluation in Section 4.2, the final flaw sizeafter 40 years of fatigue crack growth meets the ASME Section XI, Appendix C acceptance criteria.
An additional evaluation is contained in Section 4.2.3 of this calculation note which determines theacceptable life of the repair weld considering corrosion to the safe end base material which wouldincrease the diameter of the attachment nozzle bore. This evaluation determined that it would take longerthan 40 years for the hole to reach an unacceptable size due to corrosion in the region.Since Palo Verde Unit 3 has less than 40 years of operation remaining, it is therefore technically justifiable to continue operation for the remaining life of the plant with a flawed attachment weld presentin the RCP suction safe end, since the acceptance criteria of ASME Section XI have been met.WCAP-1 8051-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 35-5-15 LOOSE PARTS EVALUATION Because the half-nozzle repair process involves leaving a small remnant of the nozzle inside the existingpenetration, the possibility that fragments of the existing partial penetration weld could come loose insidethe RCS through the current planned end of plant life, which is 60 years, is evaluated.
It is postulated, based on NDE performed to describe the flaws, that the crack(s) on the nozzle and/or weld are part-through-wall in the axial direction with no evidence of circumferential cracks. This is consistent with theorientation previously observed by APS for this type of degradation mechanism (i.e., PWSCC) ininstrument nozzles in the hot leg.The remnant Alloy 600 instrument nozzle (approximately 1.5 inches in length) is recessed inside the safeend bore. It remains constrained by a relatively tight radial clearance between the bore and the nozzle.For the half-nozzle repair to create a loose part, it would require continued degradation at the remaining portion of the original Alloy 600 nozzle and at the nozzle-to-casting J-weld wetted surface.Embrittlement, corrosion and wastage,
- fatigue, and stress corrosion cracking were considered as potential material degradation mechanisms.
Based on a review of these degradation mechanisms, only PWSCCwas identified as a potential active mechanism for material degradation that could potentially give rise tothe production of loose parts. However, based on the tortuous, tight array of cracking created byPWSCC, as well as the fact that any non-adhered sections of material would be constrained from releaseby the surrounding
- material, it has been determined that continuation of PWSCC processes in the remnantAlloy 600 nozzle and i-weld is unlikely to result in liberation of loose material from the remaining in-place nozzle structure.
- However, although it has been concluded that it is very unlikely that a loose part will be released from theAlloy 600 nozzle and/or J-weld, this evaluation conservatively addresses the possibility that one or morefragments of the existing partial penetration weld separates from the nozzle and weld butter and becomesa loose part inside the RCS. Based on this assumption, a conservatively sized fragment of weld wasassumed to weigh approximately 0.1 pounds and have dimensions no greater than the partial penetration weld thickness at its cross-section, and a length ofone-quarter of the circumference around the instrument nozzle.Therefore, the structural and functional impacts of the loose weld fragment(s) on affected systems,structures, and components (SSCs) were evaluated.
Engineering judgments were applied and priorPVNGS loose parts evaluation results were taken into consideration.
The evaluation considered thatalthough the aforementioned fragment represents one possible form of the loose part, it is possible thatsmaller fragments of different sizes, shapes, and weights could be released, or created.
Additional smallerfragments are possible, for example, if a weld fragment was to make contact with a high-velocity RCPimpeller blade, or perhaps make high-speed contact witha the core support barrel.The evaluation concluded that the postulated loose parts will have no adverse impact on the RCS andconnected SSCs through the current planned end of plant life. The evaluation addressed potential impactsto various SSCs where the loose parts might travel. This included the RCPs, the main coolant piping, thereactor vessel and its intemnals, the fuel, the pressurizer, steam generators, as well as other systemsattached to the RCS, including the spent fuel pool. It was determined that all impacted SSCs wouldcontinue to be capable of satisfying their design functions.
WCAP- 18051 -NP October 2015Revision 0
Westinghouse Non-Proprietary Class 36-6-16 SUMMARY AND CONCLUSION The purpose of this report is to demonstrate the acceptability of the half-nozzle repair for the flawed RCPsuction safe end instrument nozzle at Palo Verde Unit 3. A 3-D finite element model is used to evaluateASME Section III stresses and generate transient stress inputs for the fracture mechanics evaluation.
Thefinite element model conservatively accounts for potential corrosion of the replacement J-groove weldapplied for the half-nozzle repair.Transient stresses and welding residual stresses were calculated using finite element methods and thestresses were used in the fracture mechanics evaluation.
The fracture mechanics evaluation is performed in accordance with ASME Section XI and concludes that it is technically justifiable for Palo Verde Unit 3to continue operation for the remaining life of the plant with a flawed attachment weld present in the RCPsuction safe end.The loose parts evaluation concluded that the postulated loose parts will have no adverse impact on theRCS and connected SSCs through the current planned end of plant life. It was determined that allimpacted SSCs would continue to be capable of satisfying their design functions.
In conclusion, the half-nozzle repair implemented on the RCP Suction nozzle pressure instrumentation nozzle at PVNGS Unit 3 is acceptable and meets all applicable ASME Section III and Section XI criteriafor the remaining life of the plant.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 37-7-17 REFERENCES
- 1. ASME Boiler and Pressure Vessel Code,Section XI, 2001 Edition with 2003 Addenda.2. ASME Boiler and Pressure Vessel Code,Section III, 1974 Edition.3. ASME Boiler and Pressure Vessel Code, Section 11 and Section III, 1998 Edition up to and Including 2000 Addenda.4. ASME Boiler and Pressure Vessel Code,Section II, 2013 Edition.5. Westinghouse Report, WCAP-15973-P-A, Rev. 0, "Low-Alloy Steel Component Corrosion AnalysisSupporting Small-Diameter Alloy 600/690 Nozzle Repair/Replacement Programs,"
February 2005.(Westinghouse Proprietary Class 2)6. APS Letter, "Palo Verde Nuclear Generating Station (PVNGS) Units 1, 2, 3, Docket No. STN 50-528/529/530, 10 CFR 50.55a(a)(3)(i)
Alternative Repair Request for Reactor Coolant System HotLeg Alloy 600 Small-Bore Nozzles (Relief Request 31, Revision 1)." August 16, 2005. (MLAccession No. ML052550368)
- 7. NRC Letter, "Palo Verde Nuclear Generating
- Station, Units 1, 2, and 3 -Relief Request No. 31,Revision 1, Re: Proposed Alternative Repair for Reactor Coolant System Hot-Leg Alloy 600 Small-Bore Nozzles (TAC Nos. MC9 159, MC9 160, and MC9161I).
(ML Accession No. ML062300333)
- 8. Regulatory Guide 1.161, "Evaluation of Reactor Pressure Vessel with Charpy Upper-Shelf EnergyLess Than 50 ft-lb."9. E. D. Eason, J. E. Wright, E. E. Nelson, "Multivariable Modeling of Pressure Vessel and Piping J-RData," NUREG/CR-5729, MCS 910401, RF, R5, May 1991.10. Evaluation of Flaws in Ferritic Piping. Electric Power Research Institute, Palo Alto, CA: October1988. EPRI NP-6045.11. Proceedings of the ASME 2012 Pressure Vessel & Piping Conference, PVP2012-78190, "Alternative Acceptance Criteria for Flaws in Ferritic Steel Components Operating in the Upper ShelfTemperature Range."12. American Petroleum Institute, API 579-1/ASME FFS-i (API 579 Second Edition),
"Fitness-For-Service,"
June 2007.13. Dominion Engineering, Inc. Calculation C-8006-00-0 1, Rev. 0, "Palo Verde Reactor Coolant PumpInstrumentation Nozzle Repair Welding Residual Stress Analysis."
- 14. License Renewal Application, Palo Verde Nuclear Generating Station Unit 1, Unit 2, and Unit 3,Facility Operating License Nos. NPF-41, NPF-51, and NPF-74, Supplement 1, April 10, 2009.15. Palo Verde Units 1, 2, and 3 Technical Requirements Manual, Rev. 62, November, 2014.16. Westinghouse Report, DAR-MRCDA-15-6, Rev. 1, "Palo Verde Unit 3 RCS Cold Leg Alloy 600Small Bore Nozzle Repair,"
April 2015. (Westinghouse Proprietary Class 2).17. Westinghouse Letter, LTR-ME-15-65, Rev. 0, "ASME Code Section XI Reconciliation for ArizonaPublic Service (APS), Palo Verde Nuclear Generating Station (PVNGS) Unit 3 Replacement Instrument Nozzle,"
September 21, 2015.WCAP- 1805 I-NP October 2015Revision 0
Westinghouse Non-Proprietary Class 37-7-218. Westinghouse Letter, LTR-SST-10-58, Rev. 2, "ANSYS 12.1 Release Letter,"
October 2, 2012.19. Drawings(a) CE-KSB Pump Co. Inc. Drawing, C-8000-101-2017, Rev. 02, "Wall Static Pressure NozzleSuction."
(b) CE-KSB Pump Co. Inc. Drawing, E-81 11-101-2002, Rev. 00, "Pump Casing -A."(c) CE Avery Drawing, STD-009-0009, Rev. 02, "Coolant Pumps Weld Joint Identification andFabrication Requirements."
(d) CE Avery Drawing, 339-0054, Rev. 00, "Safe End Mach. of Pressure Tap Holes & Weld Prep.(Suction)."
(e) Westinghouse
- Drawing, C-14473-220-002, Rev. 0, "Replacement Pressure Tap Nozzle."(f) Westinghouse
- Drawing, E-14473-220-001, Rev. 0, "Pump Casing -A Pressure Tap NozzleModification Assembly."
(g) Combustion Engineering
- Drawing, E-65473-771-001, Rev. 00, "General Arrangement ArizonaPublic Service III Piping."20. CE-KSB Pump Co. Inc. MDL, MDL 8111-101-202, Rev. 00, "Material and Drawing List for PumpCasing 'A'," June 22, 1983.21. CE-KSB Pump Co. Inc. MDL, 8000-101-217, Rev. 02, "Material and Drawing List for StaticPressure Nozzle -Suction,"
August 9, 1982.22. Combustion Engineering Specification, SYS80-PE-480, Rev. 02, "Specification for Standard Plantfor Reactor Coolant Pumps," May 10, 1978.23. Combustion Engineering Specification, 00000-PE-140, Rev. 04, "General Specification for ReactorCoolant Pipe and Fittings,"
May 25, 1977.24. Palo Verde Nuclear Generating Station Engineering Evaluation,
- 4642529, May 1, 2015.25. ASME Standard, ASME OM3-1982, "Requirements for Preoperational and Initial Start-up Vibration Testing of Nuclear Power Plant Piping Systems,"
September 30, 1982.26. Westinghouse Design Specification, 14273-PE-140, Rev. 15, "Project Specification for ReactorCoolant Piping and Fittings for Arizona Nuclear Power Project,"
June 25, 2007.27. PVNGS Engineering Calculation, 13-MC-RC-503, Rev. 9, "RCS -RCP Pressure Differential System,"
November 16, 2010.28. Palo Verde Nuclear Generating Station Specification, 13-PN-0204, Rev. 21, "Fabrication andInstallation of Nuclear Piping Systems for the Arizona Public Company Palo Verde NuclearGenerating Station Unit 1, 2 and 3," May 2, 2014.29. American National
- Standard, ANSI B16.11I -1973, "Forged Steel Fittings, Socket-Welding andThreaded,"
ASME, New York, NY, 1973.30. NRC Letter, "Palo Verde Nuclear Generating
- Station, Unit 2 Relief Request No. 31 RE: ProposedAlternative Repair for Reactor Coolant System Hot Leg Alloy 600 Small-Bore Nozzles (TAC No.MC6500),"
May 5, 2005. (ML Accession No. ML051290123)
WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 37-3Wetngos No-rpieayCas w-31. APS Letter, "Palo Verde Nuclear Generating Station (PVNGS) Unit 2 Docket No. STN 50-529 10CFR 50.5 5a(a)(3)(i)
Alternative Repair Request for Reactor Coolant System Hot Leg Alloy 600Small-Bore Nozzles (Relief Request 31)," March 25, 2005. (ML Accession No. ML050950358)
WCAP- 1805 1-NP Otbr21Revision 0
Westinghouse Non-Proprietary Class 3A-1APPENDIX A: ASME STRESS PATH LOCATIONS The figures in this appendix show the path locations for the maximum stresses reported in Section 3.2.-Von Mises plots of limiting stresses for the normal and upset conditions are also included.
Each figure inthis appendix shows a sliced view of the model to show the path location or stress results of interest.
Theterm "cut" is used in the figures to denote a stress evaluation path.A.1 RCP SUCTION NOZZLE SAFE END LIMITING PATHSFigure A-i: Path Location 6a,c,eWCAP-18051-NP October 2015WCAP- 1805 I-NPRevision 0
Westinghouse Non-Proprietary Class 3A-A-2__ a,c,eFigure A-2: Path Location 1Note: The view shown is a slice of the RCP safe end with the top half removed.
Path 1 is a radial pathfrom the inside surface of the safe end to the outside of the safe end along the length of the instrumentation nozzle. The first point in the path is coincident with the remnant nozzle weld. The end point is coincident with the replacement nozzle weld.WCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-A-3-- a~ceFigure A-3: von Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 18051-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A4A-4-ia,c,eFigure A-4: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NP October 2015Revision 0
A.2Westinghouse Non-Proprietary Class 3REPLACEMENT NOZZLE LIMITING PATHSFigure A-5: Path Location 61A-5fla,c,eWCAP- 18051 -NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3Westinghouse Non-Proprietary Class 3 A-6-- a,c,eFigure A-6: Path Locations 58 and 60__ a,c,eFigure A-7: yon Mises Stresses
-Cooldown Transient at Step 4, Time 10,800 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-7West in2house Non-Proprietary Class 3 A-7__ a~ceFigure A-8: von Mises Stresses
-Upset Transient at Step 5, Time 62.89 SecondsNote: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A.3 ATTACHMENT WELD LIMITING PATHSFigure A-9: Path Location 26A-8a~c,eWCAP-1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-9Westinghouse Non-Proprietary Class 3 A-9a,c,eFigure A-10: Path Location 31a~ceFigure A-11: Path Location 39WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-10Westinghouse Non-Proprietary Class 3 A- 10-ia~c,eFigure A-12: Path Location 27Figure A-13: Path Location 19a,c,eWCAP-1805 1-NP October 2015WCAP- 18051-NPRevision 0
Westinghouse Non-Proprietary Class 3 AiA-11-- a,c,eFigure A-14: Path Location 35WCAP- 1805 1-NPOctober 2015Revision 0
Westinghouse Non-Proprietary Class 3A-12Westinghouse Non-Proprietary Class 3 A- 12-- a,c,eFigure A-15: yon Mises Stresses
-Cooldown Transient at Step 5, Time 16,664 Seconds withCutout at Path 39Note: Stress displayed in the above figure is in units of psi.WCAP- 18051-NP October 2015WCAP- 18051-NPRevision 0
fWestinghouse Non-Proprietary Class 3A-13Westinghouse Non-Proprietary Class 3 A-13-- a,c,eFigure A-16: von Mises Stresses
-10% Step Increase Transient at Step 4, Time 686 Secondswith Cutout at Path 39Note: Stress displayed in the above figure is in units of psi.WCAP- 1805 1-NPOctober 2015Revision 0