ML17172A645: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(StriderTol Bot change)
 
Line 16: Line 16:


=Text=
=Text=
{{#Wiki_filter:Channel 3                                             DAK 250-g                                                                             main electronic rack NZ 21.22 Linear Power                                                                                                               change rate remark:
{{#Wiki_filter:NV 102 NI 11 NH 32.51 NR 31 NB 22 NZ 21.22 NZ 12 test 0...+1kV 1 out of 16 range indicator S
U range information 4 binary inputs NB 21 change rate 2 fixed trip alarms adjustable alarms and status signals operator's
: access, functional monitoring, re-calculation range, test test (NZ12) test 4 bit detector voltage monitoring internal voltage monitoring fault status up/down enable NT 64 I
f decoder 16 relays range 2 key switches NS 01 detector voltage range control change rate RTP 3000 0 to 150% in 16 lin. ranges 110% (
FS) setback 120% (
FS) pow. trip 73.3%
80%
0.1 pA to 1mA 80C32 par-RAM EPROM counter 2
NB 28 relay chg.over relay switches trip alarms uncompensated ion chamber current/frequ.
converter parameter settings DAK 250-g: Purdue Linear Power Channel - Block Diagram 2016-06-29 J
P23 ed.1 reviewed: approved:
DBR P 0000396 Channel 3 Linear Power Power Supply NN43 NN 53 Vs = 115 / 230 VAC 8 relays relay chg. over alarms test failure Relais NS 01 NB 21 not on scale 4 to 20 mA S-BUS lin. power log. power low pass, lin./log.
scaling test (NZ12) 8x DPDT remark:
linear full scale:
linear full scale:
change                                                                  FS := "150%"
FS := 150%"
current/frequ.
73.3%FS = 110%
uncompensated                                                                                            rate                                                              80%FS = "120%"
3.3%FS = zero 80%FS = "120%"
converter ion chamber                                                                                                                                                              73.3%FS = "110%" (default) 3.3%FS = "zero" (default)
" (default)
NV 102                        NI 11                                  low pass,                log. power S                                                                                                                                  NT 64 I                                                      counter      lin./log.
" (default)
f                                                                  scaling                                                4 to 20 mA RTP 3000 U      0.1 pA to 1mA                range, test                              range                                  lin. power test (NZ12)                                                                                                          0 to 150% in 16 lin. ranges test (NZ12)
RTP 3000 system fault (to RTP 3000) system test (to RTP 3000) up/down enable Release (Keys) remark:
NH 32.51                                                                      NB 22 0...+1kV                                                                                          decoder detector voltage detector voltage                                monitoring up/down         range                range 2  enable         control        4 bit  information NR 31          relay            1 out of 16 16 relays                                    RTP 3000 switches      range indicator NB 28 2 fixed                    trip alarms    8x DPDT    relay BO2.1                                  110% (73.3%FS) setback trip                                              chg.over alarms                                        BO2.2                                    120% (80% FS) pow. trip NN43 NN  53 internal voltage Power Supply                                                              monitoring fault Vs = 115 / 230 VAC                                                    status par-EPROM      80C32 RAM remark:
Due to automatic switching, the not on scale alarm is only relevant for the lowest range 16.
Due to automatic switching, the not on scale S-BUS                                                                    alarm is only relevant for the lowest range 16.
Its expected to switch at approx. 1 pA.
Its expected to switch at approx. 1 pA.
up/down                      NZ 12                                              NB 21 enable                                                                                  BO1.6 alarms      8 relays NB 21                        operator's                                              BO1.1                                    not on scale access,          adjustable 4 binary                    functional          alarms          test inputs                  monitoring, and                              BO1.7                                   system test status          failure                                                    (to RTP 3000) re-            signals                            BO1.8 calculation test test                      NS 01 Release                                                                                                                  NS 01 2 key                                                      channel fault                relay (Keys)      parameter settings              switches                                                                    Relais                                          system fault board control loop                        chg. over (to RTP 3000) 2016-06-29      DBR DAK 250-g: Purdue Linear Power Channel - Block Diagram                                                                                            PJ0000396 P23 ed.1 reviewed:          approved:}}
BO1.8 BO1.6 BO1.7 BO1.1 BO2.1 BO2.2 main electronic rack DAK 250-g board control loop channel fault}}

Latest revision as of 19:07, 8 January 2025

Drawing - Dak 250-g: Purdue Linear Power Channel - Block Diagram
ML17172A645
Person / Time
Site: Purdue University
Issue date: 06/29/2016
From:
Mirion Technologies Corp
To:
Office of Nuclear Reactor Regulation
Shared Package
ML17172A634 List:
References
Download: ML17172A645 (1)
v • d • e


Text

NV 102 NI 11 NH 32.51 NR 31 NB 22 NZ 21.22 NZ 12 test 0...+1kV 1 out of 16 range indicator S

U range information 4 binary inputs NB 21 change rate 2 fixed trip alarms adjustable alarms and status signals operator's

access, functional monitoring, re-calculation range, test test (NZ12) test 4 bit detector voltage monitoring internal voltage monitoring fault status up/down enable NT 64 I

f decoder 16 relays range 2 key switches NS 01 detector voltage range control change rate RTP 3000 0 to 150% in 16 lin. ranges 110% (

FS) setback 120% (

FS) pow. trip 73.3%

80%

0.1 pA to 1mA 80C32 par-RAM EPROM counter 2

NB 28 relay chg.over relay switches trip alarms uncompensated ion chamber current/frequ.

converter parameter settings DAK 250-g: Purdue Linear Power Channel - Block Diagram 2016-06-29 J

P23 ed.1 reviewed: approved:

DBR P 0000396 Channel 3 Linear Power Power Supply NN43 NN 53 Vs = 115 / 230 VAC 8 relays relay chg. over alarms test failure Relais NS 01 NB 21 not on scale 4 to 20 mA S-BUS lin. power log. power low pass, lin./log.

scaling test (NZ12) 8x DPDT remark:

linear full scale:

FS := 150%"

73.3%FS = 110%

3.3%FS = zero 80%FS = "120%"

" (default)

" (default)

RTP 3000 system fault (to RTP 3000) system test (to RTP 3000) up/down enable Release (Keys) remark:

Due to automatic switching, the not on scale alarm is only relevant for the lowest range 16.

Its expected to switch at approx. 1 pA.

BO1.8 BO1.6 BO1.7 BO1.1 BO2.1 BO2.2 main electronic rack DAK 250-g board control loop channel fault

Retrieved from "https://kanterella.com/w/index.php?title=ML17172A645&oldid=5134128"