ML20097E976: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot insert)
 
(StriderTol Bot change)
 
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:_ _ _ __ _       - - _ _ _ _ _ _ _ - . _ - - - _ _ _ _ _ _ _ _ _ - _ _ - _ _ - _ _ - - -- -
{{#Wiki_filter:_ _ _ __ _
4 E
4 E
ATTACHMENT 2 PROPOSED STAT 10fl SERVICE WATER SYSTEM TECHNICAL SPECIFICATION P
ATTACHMENT 2 PROPOSED STAT 10fl SERVICE WATER SYSTEM TECHNICAL SPECIFICATION P
PDR
PDR


Attachment 2 to TXX-92260
.- to TXX-92260
- PAge 1 of 6 PLANT SYSTEMS 3/4.7.4 STATION SERVICE WATER SYSTEM                                                       DRAFT LIMITING CONDITION FOR OPERATION t least two independent station service water loops per unit and he cross-c nect between the station service water systems of each unit s 11 be
- PAge 1 of 6 PLANT SYSTEMS 3/4.7.4 STATION SERVICE WATER SYSTEM DRAFT LIMITING CONDITION FOR OPERATION t least two independent station service water loops per unit and he cross-c nect between the station service water systems of each unit s 11 be
            , OPERABLE.           In addition, the cross-connect valves XSW-0006, XSW-0007, SW-0008,           I
, OPERABLE.
            ! XSW-0028 an XSW-0029 shall be capable of being opened (from the m n control room) to pro             e a flow path between the two units.
In addition, the cross-connect valves XSW-0006, XSW-0007, SW-0008, I
j APPLICABILITY:                     DES 1, 2, 3, and 4.
! XSW-0028 an XSW-0029 shall be capable of being opened (from the m n control room) to pro e a flow path between the two units.
j APPLICABILITY:
DES 1, 2, 3, and 4.
f ACTION:
f ACTION:
Both Units in MODES 1,             ,  3 or 4.
Both Units in MODES 1, 3 or 4.
: a. With only one s ation service water loo 'per unit OPERABLE, restore at least two loo per unit to OPERAB status within 72 hours or for the unit with the noperable statio service water i.,op be in at least HOT STANDBY         thin the next. hours and in COLD SHUT 00WN within the following 30 hou           .
a.
: b. With one or more of the rossfconnect valve (s) inoperable and not capsble of being opened             r ffi the control room), within 72 hours re-store the valve (s) to OPE             LE status or open the affected valve (s),
With only one s ation service water loo 'per unit OPERABLE, restore at least two loo per unit to OPERAB status within 72 hours or for the unit with the noperable statio service water i.,op be in at least HOT STANDBY thin the next. hours and in COLD SHUT 00WN within the following 30 hou b.
                                .and maintain the affecte v ve(s) open; otherwise be in at least HOT STANDBY within the next             ho s and in COLD SHUTOOWN within the fol-I
With one or more of the rossfconnect valve (s) inoperable and not capsble of being opened r ffi the control room), within 72 hours re-store the valve (s) to OPE LE status or open the affected valve (s),
        /                        lowing 30 hours.
.and maintain the affecte v ve(s) open; otherwise be in at least HOT
One unit in Modes 1, 2, 3 or                 and one unit s Mode 5 or 6.
/
i                   a. . Verify that at 1 st one pump in the hutdown unit is OPERABLE and l,                         available to pr ide service water to e operating unit. If neither
STANDBY within the next ho s and in COLD SHUTOOWN within the fol-lowing 30 hours.
      !                        service water ump in the shutdown unit s OPERABLE, restore at least one pump to 0FERABLE status within 72 hou , or place the operating i'                unit in at }4ast HOT STANDBY within the nex 6 hours and in COLD SHUTDOWN w thin the following 30 hours-                 .
I One unit in Modes 1, 2, 3 or and one unit s Mode 5 or 6.
: b. With on service water loop in the operating un1 inoperable, restore two lo s in the operating unit to OPERABLE statu within 72 hours or 3              be in at least HOT STANDBY within the next 6 hours               d in COLD SHUT-1_            00       with the following 30 hours.
i a.
                    \
. Verify that at 1 st one pump in the hutdown unit is OPERABLE and l,
                      \   c. W h one or more of the cross-connect valve (s) inoperabl and not
available to pr ide service water to e operating unit.
                      \           apable of being opened (from the control room), with 72 h rs restor the valve (s) to OPERABLE status or open the affected valve (s and
If neither service water ump in the shutdown unit s OPERABLE, restore at least one pump to 0FERABLE status within 72 hou, or place the operating i
                        \'
unit in at }4ast HOT STANDBY within the nex 6 hours and in COLD SHUTDOWN w thin the following 30 hours-.
maintain the affected valve (s) open; otherwise place the opera ng unit in at least HOT STANDBY within the next 6 hours and in COL SHUTDOWN within the following 30 hours.
b.
Su     h u.<t "A '
With on service water loop in the operating un1 inoperable, restore two lo s in the operating unit to OPERABLE statu within 72 hours or be in at least HOT STANDBY within the next 6 hours d in COLD SHUT-3 00 with the following 30 hours.
COMANCHE PEAK - UNITS 1 AND 2                     3/4 7-14
1_
\\
\\
c.
W h one or more of the cross-connect valve (s) inoperabl and not
\\
apable of being opened (from the control room), with 72 h rs restor
\\
maintain the affected valve (s) open; otherwise place the opera the valve (s) to OPERABLE status or open the affected valve (s and ng unit in at least HOT STANDBY within the next 6 hours and in COL SHUTDOWN within the following 30 hours.
Su h u.<t "A '
COMANCHE PEAK - UNITS 1 AND 2 3/4 7-14


Attachment           to TXX-42260 n, - e DRAFT PLANT SYSTEMS cVRVEILLANCE REQUIREMENTS
Attachment to TXX-42260 DRAFT n, - e PLANT SYSTEMS cVRVEILLANCE REQUIREMENTS
                                                                                                            /
/
ach station ser                         e water loop shall be demoastrats OPERABLE:
ach station ser e water loop shall be demoastrats OPERABLE:
: a. At least once per                         days by . rifying t3a       ch valve (manual,
a.
        /                   power-operated, or a                         matic) ervicipq safety-related equipment that is not locked, se ed,orotp#wisesecuredinpositionisin its correct position; 7
At least once per days by. rifying t3a ch valve (manual,
: b. Atleastonceper92#aydy                                 4 11,.g cross-connect valves XSW-0006, j               XSW-0007, XSW-000&dSW-0028, anNSW-0029 or verifying that the                                               -
/
1 valves are loc,Ae6 open with power r ved; and
power-operated, or a matic) ervicipq safety-related equipment that is not locked, se ed,orotp#wisesecuredinpositionisin its correct position; 7
: c. At leas                   per 18 months during shutdo                 by verifying that each   l sta eh service water pump starts automatica i on a Safety Injection
b.
                                                                                                      -- -              J s_        t_e s COMANCHE PEAK - UNITS 1 AND 2                             3/4 7-15
Atleastonceper92#aydy 1
4 1,.g cross-connect valves XSW-0006, j
XSW-0007, XSW-000&dSW-0028, anNSW-0029 or verifying that the valves are loc,Ae6 open with power r ved; and 1
c.
At leas per 18 months during shutdo by verifying that each l
sta eh service water pump starts automatica i on a Safety Injection J
t_e s s_
COMANCHE PEAK - UNITS 1 AND 2 3/4 7-15


                .        _ _ _ _ - - _ _ _ _ _ - to TXX-92260 Page 3 of 6                                                 _
_ _ _ _ - - _ _ _ _ _ - to TXX-92260 Page 3 of 6 INSERr" A
INSERr" A
* 5 PLANT SYSTEMS 3/4.7.4 STATION SERVICE WATER SYSTEM LIMITING CONDITION FOR OPERATION 3.7.4.1 At least two independent station service water loops per unit and the cross-connects between the station service water systems of each unit shall be OPERABLE.
* 5 PLANT SYSTEMS 3/4.7.4   STATION SERVICE WATER SYSTEM LIMITING CONDITION FOR OPERATION 3.7.4.1 At least two independent station service water loops per unit and the cross-connects between the station service water systems of each unit shall be OPERABLE.
APPLICABILITY:
APPLICABILITY:                         Units 1 and 2 in MODES 1, 2, 3 and 4 ACTION:
Units 1 and 2 in MODES 1, 2, 3 and 4 ACTION:
: a. With only one station service water loop in a unit OPERABLE, restore at least two loops per unit to OPERABLE status within 72 hours, or for the unit (s) with the inoperable station service water loop, be in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours,
a.
: b. With one or more of the cross-connects inoperable, within 7 days restore the cross-connect (s) to OPERABLE status.
With only one station service water loop in a unit OPERABLE, restore at least two loops per unit to OPERABLE status within 72 hours, or for the unit (s) with the inoperable station service water loop, be in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours, b.
With one or more of the cross-connects inoperable, within 7 days restore the cross-connect (s) to OPERABLE status.
Otherwise, be in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours.
Otherwise, be in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours.
SURVEILLANCE RE0VIREMEN_T_S                                                                                                                                   _ _
SURVEILLANCE RE0VIREMEN_T_S 4.7.4.1.1 Each station service water loop shall be demonstrated OPERABLE:
4.7.4.1.1   Each station service water loop shall be demonstrated OPERABLE:
a.
: a.                     At least once per 31 days by verifying that each valve (manual, power-operated, or automatic) servicing safety-related equipment that is not locked, sealed, or otherwise secured in position is in its correct position; and
At least once per 31 days by verifying that each valve (manual, power-operated, or automatic) servicing safety-related equipment that is not locked, sealed, or otherwise secured in position is in its correct position; and b.
: b.                     At least once per 18 months, by verifying that each station service water pump starts automatically on a Safety injection test signal.
At least once per 18 months, by verifying that each station service water pump starts automatically on a Safety injection test signal.
4.7.4.1.2 The cross-connects shall be demonstrated OPERABLE by cycling the cross-connect valves in the flow path or verifying that these valves are locked open at least once per 92 days.
4.7.4.1.2 The cross-connects shall be demonstrated OPERABLE by cycling the cross-connect valves in the flow path or verifying that these valves are locked open at least once per 92 days.
COMANCHE PEAK - UNITS 1 AND 2                                                                                                   3/4 7-14                             DRAFT
COMANCHE PEAK - UNITS 1 AND 2 3/4 7-14 DRAFT


Attachment 2 to TXX-92260 Page 4 of 6 THSERT"h PLANT SYSTEMS LlHITING CONDITION FOR OPERATION 3.7.4.2 At least two independent station service water loops in the operating unit *, at least one station service water pump in the shutdown unit ** and the cross-connects from the OPERABLE station service water pump in the shutdown unit to the station service water loops of the operating unit shall be OPERABLE.
_ _ - _ - - to TXX-92260 Page 4 of 6 THSERT"h PLANT SYSTEMS LlHITING CONDITION FOR OPERATION 3.7.4.2 At least two independent station service water loops in the operating unit *, at least one station service water pump in the shutdown unit ** and the cross-connects from the OPERABLE station service water pump in the shutdown unit to the station service water loops of the operating unit shall be OPERABLE.
APPLICA31LITY:       Unit 1 (Unit 2) in MODES 1, 2, 3 and 4 Unit 2 (Unit 1) in MODES 5, 6 and defueled                                                                                                 -
APPLICA31LITY:
ACTION:
Unit 1 (Unit 2) in MODES 1, 2, 3 and 4 Unit 2 (Unit 1) in MODES 5, 6 and defueled ACTION:
: a. With one station service water loop in the operating unit inoperable, restore two loops in the operating unit to                                                                                                 l OPERABLE status within 72 hours or be in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours,
a.
: b. With one or more of the cross-connects between the OPERABLE station service water pump in the shutdown unit and the station service water loops in the operating unit inoperable, within 7 days restore the inoperable valve (s) to OPERABLE status. Otherwise, place the operating unit in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours,
With one station service water loop in the operating unit inoperable, restore two loops in the operating unit to l
: c. If neither station service water pump in the shutdown unit is OPERABLE, restore at least one pump to OPERABLE status within 7 days or place the operating unit in at least HOT                                                                                           -
OPERABLE status within 72 hours or be in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours, b.
STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours.
With one or more of the cross-connects between the OPERABLE station service water pump in the shutdown unit and the station service water loops in the operating unit inoperable, within 7 days restore the inoperable valve (s) to OPERABLE status. Otherwise, place the operating unit in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours, c.
If neither station service water pump in the shutdown unit is OPERABLE, restore at least one pump to OPERABLE status within 7 days or place the operating unit in at least HOT STANDBY within the next 6 hours and in COLD SHUTDOWN within the following 30 hours.
SURVEIL (ANCE REOUIREMENTS 4.7.4.2.1 Each station service water loop in the operating unit shall be demonstrated OPERABLE per the requirements of Specification 4.7.4.1.1.
SURVEIL (ANCE REOUIREMENTS 4.7.4.2.1 Each station service water loop in the operating unit shall be demonstrated OPERABLE per the requirements of Specification 4.7.4.1.1.
4.7.4.2.2 The cross-connect (s) between the OPERABLE station service water pump in the shutdown unit and the station service water loops in the operating unit shall be demonstrated OPERABLE by cycling the cross-connect valves in the flow path or verifying that these valves are locked open at least once per 92 days.
4.7.4.2.2 The cross-connect (s) between the OPERABLE station service water pump in the shutdown unit and the station service water loops in the operating unit shall be demonstrated OPERABLE by cycling the cross-connect valves in the flow path or verifying that these valves are locked open at least once per 92 days.
* A Unit in MODE 1, 2, 3 or 4 is designated as the " operating unit".
* A Unit in MODE 1, 2, 3 or 4 is designated as the " operating unit".
                ** A unit in MODE 5, 6 or defueled is designated as the " shutdown unit".
** A unit in MODE 5, 6 or defueled is designated as the " shutdown unit".
COMANCHE PEAK - UNITS 1 AND 2                                                                                       3/4 7-15           DRAFT
COMANCHE PEAK - UNITS 1 AND 2 3/4 7-15 DRAFT


n tac a nt 2 ta Txx-N N N o. 3 ) nf 6 PLANT SYSTEMS BASES 3/4.7.3 COMPONENT COOLING WATER SYSTEM The OPERABILITY of the Component Cooling Water System ensures that suf-ficient cooling capacity is available for continued operation of safety-related equipment during normal and accident conditions.                 The redundant cooling capacity of this system, assuming a single failure, is consistent with the assumptions used in the safety analyses A Unit in Mo.bt.1,2,3 oY 4 Wil be.,
n tac a nt 2 ta Txx-N N N o. 3 ) nf 6 PLANT SYSTEMS BASES 3/4.7.3 COMPONENT COOLING WATER SYSTEM The OPERABILITY of the Component Cooling Water System ensures that suf-ficient cooling capacity is available for continued operation of safety-related equipment during normal and accident conditions.
de si3114ted e oferaO4 God A Wt 3/4.7.4 STATION SERVICE WATER SYSTE;4                 o McDE 9, C cn de wie     wat be NNd'Decc i r" sNM                         4 b,
The redundant cooling capacity of this system, assuming a single failure, is consistent with the assumptions used in the safety analyses 4 Wil be.,
The OPERABILITY of the Station Service Water System ensures that suffi-               i cient cooling capacity is available for continued operation of safety related equipment during normal and accident conditions.                 The redundant cooling capa-city of this system, assuming a single failure, is consistent with the assump-tions used in the safety analyses. ~
A Unit in Mo.bt.1,2,3 oY de si3114ted e oferaO4 God A Wt 3/4.7.4 STATION SERVICE WATER SYSTE;4 o McDE 9, C cn de wie wat be 4
s   Hon In the event of a total loss of service water in one unit at Comanche Peak, q          back@trt cooling capacity is ava lable via a cross-connect between the twogh units. The OPERABILITY of the unit cross-connect along with agservice water pump in the shutdown unit ensures the availability of sufficient redundant cooling capacity for the operating unit. The Limiting Condition of Operation
NNd'Decc i r" sNM b,
__      will ensure a significant risk reduction as indicated by the analyses of a loss
The OPERABILITY of the Station Service Water System ensures that suffi-i cient cooling capacity is available for continued operation of safety related equipment during normal and accident conditions.
      & M service water systemeccid:nt. The surveillance requirements ensure the
The redundant cooling capa-city of this system, assuming a single failure, is consistent with the assump-tions used in the safety analyses. ~
'.            . short anct long-term OPERABILIT of th service water system and cross-connect between the two units                       Cven                       -
s Hon In the event of a total loss of service water in one unit at Comanche Peak, back@trt cooling capacity is ava lable via a cross-connect between the twogh q
The d (<ess Camb                     u NS ^id ter system cross-connect between the two units consists of 60hh"N appropriate piping, valves ed N trr:ntatf0 5crest-cornect h$' he ischarge oT thejservice water pumps of the two units. 8, Operat h; the cross-connec , U@
units.
thc r?p'y ddditional redundant cooling capac ty from one unit is availab e to the servi             .
The OPERABILITY of the unit cross-connect along with agservice water pump in the shutdown unit ensures the availability of sufficient redundant cooling capacity for the operating unit.
water system of the other unit.
The Limiting Condition of Operation will ensure a significant risk reduction as indicated by the analyses of a loss
3/4.7.5 ULTIMATE HEAT SINK The limitations on the ultimate heat sink level and temperature ensure that sufficient cooling capacity is available to either: (1) provide normal cooldown of the facility or (2) mitigate the effects of accident conditions within acceptable limits.
& M service water systemeccid:nt.
The surveillance requirements ensure the
. short anct long-term OPERABILIT of th service water system and cross-connect between the two units Cven 60hh"N d (<ess Camb u NS ^id The ter system cross-connect between the two units consists of appropriate piping, valves ed N trr:ntatf0 crest-cornect h$' he ischarge 5
oT thejservice water pumps of the two units.
8, Operat h; the cross-connec, U@
thc r?p'y ddditional redundant cooling capac ty from one unit is availab e to the servi water system of the other unit.
3/4.7.5 ULTIMATE HEAT SINK The limitations on the ultimate heat sink level and temperature ensure that sufficient cooling capacity is available to either:
(1) provide normal cooldown of the facility or (2) mitigate the effects of accident conditions within acceptable limits.
The limitations on minimum water level is based on providing a 30-day cooling water supply to safety-related equipment without exceeding its design basis temperature and is consistent with the recommendations of Regulatory Guide 1.27, " Ultimate Heat Sink for Nuclear Plants," Rev. 2 (January 1976).
The limitations on minimum water level is based on providing a 30-day cooling water supply to safety-related equipment without exceeding its design basis temperature and is consistent with the recommendations of Regulatory Guide 1.27, " Ultimate Heat Sink for Nuclear Plants," Rev. 2 (January 1976).
The limitation on maximum temperature is based on the maximum allowable compo-nent temperatures in the Service Water and Component Cooling Water Systems, and the requirements for cooldown. The limitation on average sediment depth is based on the possible excessive sediment buildup in the service water intake channel.
The limitation on maximum temperature is based on the maximum allowable compo-nent temperatures in the Service Water and Component Cooling Water Systems, and the requirements for cooldown.
COMANCHE PEAK - UNIT 1                           8 3/4 7-4
The limitation on average sediment depth is based on the possible excessive sediment buildup in the service water intake channel.
COMANCHE PEAK - UNIT 1 8 3/4 7-4


p.
p.
AttechnentJ2 to TKX-92260-
AttechnentJ2 to TKX-92260-
      - Pega 6,ot f
- Pega 6,ot f PLANT SYSTEMS DRAFT BASES INS E R T _ ' S ' _
                      , PLANT SYSTEMS                                                 .
1 A cross-connect valve is OPERABLE if it can be cycled or is locked-
DRAFT BASES 1 INS E R T _ ' S ' _
~
                                        ~
open;.however, at least one cross-connect: valve between units is ed to be maintained closed in accordance with GDC-5 unless r
A cross-connect valve is OPERABLE if it can be cycled or is locked-                 '
requir.e due to total-loss of SSW pumps.for either unit.
open;.however, r                  at least   one   cross-connect: valve between units is requir.eed to be maintained closed in accordance with GDC-5 unless due to total-loss of SSW pumps.for either unit. The OPERABLE pump.is manually essential  heat loads,realigned and flow balanced to provide cooling to               ,
The OPERABLE pump.is manually realigned and flow balanced to provide cooling to essential heat loads, L (Vir t\\us I
L (Vir t\us I
~v m.
  ~v           m. 4         ,,                ,-y-   ,y
4
                                                                                                - - . -_ .}}
,-y-
,y
_}}

Latest revision as of 07:29, 13 December 2024

Proposed TS Section 3/4.7.7 Re Svc Water Sys
ML20097E976
Person / Time
Site: Comanche Peak  Luminant icon.png
Issue date: 06/05/1992
From:
TEXAS UTILITIES ELECTRIC CO. (TU ELECTRIC)
To:
Shared Package
ML20097E968 List:
References
NUDOCS 9206150120
Download: ML20097E976 (7)


Text

_ _ _ __ _

4 E

ATTACHMENT 2 PROPOSED STAT 10fl SERVICE WATER SYSTEM TECHNICAL SPECIFICATION P

PDR

.- to TXX-92260

- PAge 1 of 6 PLANT SYSTEMS 3/4.7.4 STATION SERVICE WATER SYSTEM DRAFT LIMITING CONDITION FOR OPERATION t least two independent station service water loops per unit and he cross-c nect between the station service water systems of each unit s 11 be

, OPERABLE.

In addition, the cross-connect valves XSW-0006, XSW-0007, SW-0008, I

! XSW-0028 an XSW-0029 shall be capable of being opened (from the m n control room) to pro e a flow path between the two units.

j APPLICABILITY:

DES 1, 2, 3, and 4.

f ACTION:

Both Units in MODES 1, 3 or 4.

a.

With only one s ation service water loo 'per unit OPERABLE, restore at least two loo per unit to OPERAB status within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> or for the unit with the noperable statio service water i.,op be in at least HOT STANDBY thin the next. hours and in COLD SHUT 00WN within the following 30 hou b.

With one or more of the rossfconnect valve (s) inoperable and not capsble of being opened r ffi the control room), within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> re-store the valve (s) to OPE LE status or open the affected valve (s),

.and maintain the affecte v ve(s) open; otherwise be in at least HOT

/

STANDBY within the next ho s and in COLD SHUTOOWN within the fol-lowing 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.

I One unit in Modes 1, 2, 3 or and one unit s Mode 5 or 6.

i a.

. Verify that at 1 st one pump in the hutdown unit is OPERABLE and l,

available to pr ide service water to e operating unit.

If neither service water ump in the shutdown unit s OPERABLE, restore at least one pump to 0FERABLE status within 72 hou, or place the operating i

unit in at }4ast HOT STANDBY within the nex 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN w thin the following 30 hour3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />s-.

b.

With on service water loop in the operating un1 inoperable, restore two lo s in the operating unit to OPERABLE statu within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> or be in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> d in COLD SHUT-3 00 with the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.

1_

\\

\\

c.

W h one or more of the cross-connect valve (s) inoperabl and not

\\

apable of being opened (from the control room), with 72 h rs restor

\\

maintain the affected valve (s) open; otherwise place the opera the valve (s) to OPERABLE status or open the affected valve (s and ng unit in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COL SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.

Su h u.<t "A '

COMANCHE PEAK - UNITS 1 AND 2 3/4 7-14

Attachment to TXX-42260 DRAFT n, - e PLANT SYSTEMS cVRVEILLANCE REQUIREMENTS

/

ach station ser e water loop shall be demoastrats OPERABLE:

a.

At least once per days by. rifying t3a ch valve (manual,

/

power-operated, or a matic) ervicipq safety-related equipment that is not locked, se ed,orotp#wisesecuredinpositionisin its correct position; 7

b.

Atleastonceper92#aydy 1

4 1,.g cross-connect valves XSW-0006, j

XSW-0007, XSW-000&dSW-0028, anNSW-0029 or verifying that the valves are loc,Ae6 open with power r ved; and 1

c.

At leas per 18 months during shutdo by verifying that each l

sta eh service water pump starts automatica i on a Safety Injection J

t_e s s_

COMANCHE PEAK - UNITS 1 AND 2 3/4 7-15

_ _ _ _ - - _ _ _ _ _ - to TXX-92260 Page 3 of 6 INSERr" A

  • 5 PLANT SYSTEMS 3/4.7.4 STATION SERVICE WATER SYSTEM LIMITING CONDITION FOR OPERATION 3.7.4.1 At least two independent station service water loops per unit and the cross-connects between the station service water systems of each unit shall be OPERABLE.

APPLICABILITY:

Units 1 and 2 in MODES 1, 2, 3 and 4 ACTION:

a.

With only one station service water loop in a unit OPERABLE, restore at least two loops per unit to OPERABLE status within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />, or for the unit (s) with the inoperable station service water loop, be in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />, b.

With one or more of the cross-connects inoperable, within 7 days restore the cross-connect (s) to OPERABLE status.

Otherwise, be in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.

SURVEILLANCE RE0VIREMEN_T_S 4.7.4.1.1 Each station service water loop shall be demonstrated OPERABLE:

a.

At least once per 31 days by verifying that each valve (manual, power-operated, or automatic) servicing safety-related equipment that is not locked, sealed, or otherwise secured in position is in its correct position; and b.

At least once per 18 months, by verifying that each station service water pump starts automatically on a Safety injection test signal.

4.7.4.1.2 The cross-connects shall be demonstrated OPERABLE by cycling the cross-connect valves in the flow path or verifying that these valves are locked open at least once per 92 days.

COMANCHE PEAK - UNITS 1 AND 2 3/4 7-14 DRAFT

_ _ - _ - - to TXX-92260 Page 4 of 6 THSERT"h PLANT SYSTEMS LlHITING CONDITION FOR OPERATION 3.7.4.2 At least two independent station service water loops in the operating unit *, at least one station service water pump in the shutdown unit ** and the cross-connects from the OPERABLE station service water pump in the shutdown unit to the station service water loops of the operating unit shall be OPERABLE.

APPLICA31LITY:

Unit 1 (Unit 2) in MODES 1, 2, 3 and 4 Unit 2 (Unit 1) in MODES 5, 6 and defueled ACTION:

a.

With one station service water loop in the operating unit inoperable, restore two loops in the operating unit to l

OPERABLE status within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> or be in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />, b.

With one or more of the cross-connects between the OPERABLE station service water pump in the shutdown unit and the station service water loops in the operating unit inoperable, within 7 days restore the inoperable valve (s) to OPERABLE status. Otherwise, place the operating unit in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />, c.

If neither station service water pump in the shutdown unit is OPERABLE, restore at least one pump to OPERABLE status within 7 days or place the operating unit in at least HOT STANDBY within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br /> and in COLD SHUTDOWN within the following 30 hours3.472222e-4 days <br />0.00833 hours <br />4.960317e-5 weeks <br />1.1415e-5 months <br />.

SURVEIL (ANCE REOUIREMENTS 4.7.4.2.1 Each station service water loop in the operating unit shall be demonstrated OPERABLE per the requirements of Specification 4.7.4.1.1.

4.7.4.2.2 The cross-connect (s) between the OPERABLE station service water pump in the shutdown unit and the station service water loops in the operating unit shall be demonstrated OPERABLE by cycling the cross-connect valves in the flow path or verifying that these valves are locked open at least once per 92 days.

  • A Unit in MODE 1, 2, 3 or 4 is designated as the " operating unit".
    • A unit in MODE 5, 6 or defueled is designated as the " shutdown unit".

COMANCHE PEAK - UNITS 1 AND 2 3/4 7-15 DRAFT

n tac a nt 2 ta Txx-N N N o. 3 ) nf 6 PLANT SYSTEMS BASES 3/4.7.3 COMPONENT COOLING WATER SYSTEM The OPERABILITY of the Component Cooling Water System ensures that suf-ficient cooling capacity is available for continued operation of safety-related equipment during normal and accident conditions.

The redundant cooling capacity of this system, assuming a single failure, is consistent with the assumptions used in the safety analyses 4 Wil be.,

A Unit in Mo.bt.1,2,3 oY de si3114ted e oferaO4 God A Wt 3/4.7.4 STATION SERVICE WATER SYSTE;4 o McDE 9, C cn de wie wat be 4

NNd'Decc i r" sNM b,

The OPERABILITY of the Station Service Water System ensures that suffi-i cient cooling capacity is available for continued operation of safety related equipment during normal and accident conditions.

The redundant cooling capa-city of this system, assuming a single failure, is consistent with the assump-tions used in the safety analyses. ~

s Hon In the event of a total loss of service water in one unit at Comanche Peak, back@trt cooling capacity is ava lable via a cross-connect between the twogh q

units.

The OPERABILITY of the unit cross-connect along with agservice water pump in the shutdown unit ensures the availability of sufficient redundant cooling capacity for the operating unit.

The Limiting Condition of Operation will ensure a significant risk reduction as indicated by the analyses of a loss

& M service water systemeccid:nt.

The surveillance requirements ensure the

. short anct long-term OPERABILIT of th service water system and cross-connect between the two units Cven 60hh"N d (<ess Camb u NS ^id The ter system cross-connect between the two units consists of appropriate piping, valves ed N trr:ntatf0 crest-cornect h$' he ischarge 5

oT thejservice water pumps of the two units.

8, Operat h; the cross-connec, U@

thc r?p'y ddditional redundant cooling capac ty from one unit is availab e to the servi water system of the other unit.

3/4.7.5 ULTIMATE HEAT SINK The limitations on the ultimate heat sink level and temperature ensure that sufficient cooling capacity is available to either:

(1) provide normal cooldown of the facility or (2) mitigate the effects of accident conditions within acceptable limits.

The limitations on minimum water level is based on providing a 30-day cooling water supply to safety-related equipment without exceeding its design basis temperature and is consistent with the recommendations of Regulatory Guide 1.27, " Ultimate Heat Sink for Nuclear Plants," Rev. 2 (January 1976).

The limitation on maximum temperature is based on the maximum allowable compo-nent temperatures in the Service Water and Component Cooling Water Systems, and the requirements for cooldown.

The limitation on average sediment depth is based on the possible excessive sediment buildup in the service water intake channel.

COMANCHE PEAK - UNIT 1 8 3/4 7-4

p.

AttechnentJ2 to TKX-92260-

- Pega 6,ot f PLANT SYSTEMS DRAFT BASES INS E R T _ ' S ' _

1 A cross-connect valve is OPERABLE if it can be cycled or is locked-

~

open;.however, at least one cross-connect: valve between units is ed to be maintained closed in accordance with GDC-5 unless r

requir.e due to total-loss of SSW pumps.for either unit.

The OPERABLE pump.is manually realigned and flow balanced to provide cooling to essential heat loads, L (Vir t\\us I

~v m.

4

,-y-

,y

_