Latest revision as of 13:45, 25 February 2020

Text

Attachment a for LR-N14-0162
	ML14211A590
Person / Time
Site:	Salem
Issue date:	07/30/2014
From:	; Public Service Enterprise Group
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	Download: ML14211A590 (49)
	v • d • e

{{#Wiki_filter:Attachment A-1 Summary# 01 0900 080°) Page 1 of 1 0 2-PZR-CIRC DUH + A -

                     *B!2:1Rl\T tlli!!

CD=57'3.25'l 6-PR-1204-1 6-PRN-1204- IRS 6-PR-1203-1 2-PZR-CIRC CD 6-PRN-1203- IRS {0=451.00') 2-PZR-LDNG 0 6-PR-1205-1 CAo =-46° OR -37.3°) 6-PRN-1205-I PS-010

                                                                                                                             +
                                                                                                                       <180°JA---

SHE L C 2-PZR-CIRC BC I CD=321.56'l PR-012 PR-001 4-PR-1200-1 4 -PRN-1200- IRS 2-PZR-LONG B 2-PZR-CIRC AB SHEL 8 CA0 =-31° OR -25.1° l 2-PZR-MB 1-16 CD=1'33.00"l 2-PZR-LONG A

                                     +22.7° Y CA '=-+28°0R SHE L  A                       2-PZR-CIRC LHA CD=65.25')

I 2 - P Z R-S K IRT D=DISTANCE FROM BOTTOMiPZR- .,..-r=== '

                                                           -.......,          ===:J
                                                                      ........: '----14-PSN-1231-IRS P&ID 205301 AT TEN. TION'*

ANY REVISION. TO THIS DRAWING SHALL BE MADE ONLY BY CAED PSEG Nucle a r, L L C FIGURE: A-5 T REVISION: 1 SYSTEM: REAC T OR COOL ANT SYSTEM I I SALEM N UCLEAR GENERATING STATION PRESSURIZER UNIT 2 - WELD I HANGER IDENTIFICATION FIGURE LIR0 REVISED PER ORDER 1 No. 80038023. REV. DATE DESCRIPTION INSERVICE INSPECTION DRAWING YEAR INSPECTI O N INTERVAL I CD 2000 PSEG Nuclear, LLC. All Rights Reserved * .

AttaehmenfA-1 Page2of 10 UT Limitation Data Sheet !:!-?:_"_J Ou:!

Wuik Order N.$.:

                          .          *. *

Areas InspeCtion

Summary No.: 010900 Outage No.: 2RF01S UT Limitation Data Sheet Inspection Area Permanent Support Ring Clockwise

ttachmentA-1 Page4of10 UT Limitatio'n Data Sheet lndonArea

UT Limitation Data Sheet WOrk Order No*; 2104506 C!Od<wtse

Attacnment A-1 Page*6of10 UT Coverage Data Sheet :!!..tlt:QQ*** . , . ""'"':!!::.Ji:FP18

                                                                                                                                                                                               "'-'W:i*: *m '

WOrder .: 210450$ r--'T<"'""'*":""'<' J r--ffi*""'"*** *****"'"'_JIJ P!@!il! 1

                                                                           .* Area Inspected with Rings as tbe omv Urn l

Totallengtb = 168,5" To.taiArea = 31;9 ln2 Total Volume = 5375.2 Ina l'vtateril Single Direction '<)1:>-ve@ge :; . . -, Total *coverage Volume Base ; We1cl Matenal Two .Ou::e- coonal Coverage . 1 I' At?a <if Base nlateripl covered in one iiirection Area ofweid matedalco>ieretlintwo.rlireclipns I 4SC *:; ,46843 l:n3 45°"' 2'1 .6'lri2 45°"" .6,2: In

                                     \SI)'i=1$.11ii2                                                                00° ::: :ts In                                                60°  3864 1113 45"'C!rc. ;;z1;f3 J1l                                                             45 Circ, ,;, 10.3llf 60° [:}:.. 2{6. (1'2                                                       000 Clrc, = 10.3ln Volume <<Base mater1at-&veredm one direcl1oi:l                                                                                                                       Total cir:umferentialCov:erage

4511 Ax =2{6 ln2x 1£8$' = 2639.6!n:a Vollm"le Of weld mate.ffi:ll covered 6UU t\xC='
197Jh2x.188;5=3319AI!?

45°"" 6.2 trix. ts;; 1ll44;7in3 Circ 45° = 5375...2 ln3 SlY*:== .3,29 ln;2x 1$J),e 544.3ln$ Cir.c:.. 45" 1ll,S ln'2.Jo(.'!;tl85"= '17355 lri'3: 40 rc.= 21.,6 ln2x'168,'!t = 3639:l5 lri3 Cite 60° = 53752 bt3 cir.. ;;to.s bf,x.taa.s* = 1:s 1ri 60" circ. = 21.6 Jn2x.1'6ft.5" = 36S9Jl ina = Np A deten:n)nE!d. ingVJSiodrawir,g progf;am

i """ " "* : '"""

Permanent Support Permanent Suppo.rt Ring Rlng

]I

                                                                                                                                                                                                                                  !Anacnmem A-1 Page 7 of10
                                                                                                                         !, . =.:!!:10                                                                               I Outa No.2.2RF01S UT Coverage Data Sheet                                                                                                                      Work Order No.: 2.104506
                                                                                                                                   "' ;)>)":>f::>"l]J:,'!l1>}'>!)??!1'm)!>t;b';?.>'.m<':>>':.'S)IItowf$0'<:W..iiM!,_<<,.<<. '

COmponentlnf'ormafion*

                                                                                                                             * *>* ,:,,,"""""' *w"*"'                              ,."'1,C*'""-'-*_"_

Configuratton; Shell D to Upper Head Limitation Type 2 Area Inspected from 0" to 3"1 144 to 151 and 211n to 220'" Totall..ength = 13" Total Area= 3*t9 102 Total Volume= 446.6ln3 Base Material Sl.ngle Direction Coverage Weld Material Two Directional Coverage Total Axial Coverage Volume Area of Ba$6tnaterial covered in one direCtion AXial area ofweftl materii'!Icovered 10.3lrf 45" Ax =*142ln2 45<>Ax = 1A.In2' Axial * = 202.8 1tf' ln2 Axial 600 = 152.1 Jn3' 60" A:x "'-11 60"' Aix = 0.7 ln2 4S:O Cite; "" 1 0;5lri2 4'51' Circ. "' 1'1l3lif 00" Clre. 10.5 ln2 6o<>Circ."' 10.3.!n2 Total circumferential Coverage

V<ltume Of Base m'aterii'!l covered in one direction 4S:0Ax= 14,2!n2x 13" = 184.6 !n:r Iff Volume of weld materia\ covered

                   £WAX =n.o ln2x 13:""" t43.fn3                                       Axial45°= 1.4in2x13"= 1lt21n3                                                                                                 Circ          ;;  270.4 45" Circ. = *w5ln2x 1Z' = 13S.5Jnlf                                     Axial. 6o<>'=0.7*tn2x 13=9. fln3-Cwc 600         . 270.4  In eon eire.;= 105Jn2X 13"= 136.5 1n3                                   Ciro.45" = 10.3 lri2x 13' = 133.9 In$
                                                                                                                                                                                                                                    =

Nota: Area determined u$lng Visi<drawlng program Clre. 60" =10,31r!2xt3"""133.9 fn3 3 .......,_._.,"""'"*1

,:..i.)<;;,,>,lll'¢<; ;M'"'-"',*,,,,,,,*w'""""*'""'' '

Permanent Support PermanentSupport Rmg Ring

AttachmantA-1 Pag8of10 UT Coverage Data Sheet 010900 1 Q!:.:::MM*W<;" ! Work Order No.:. 2104506 euOfrier*JJftiOn

                                          !ant: Salem                                                              Configuration: Shell D to Upper Head Umitation Type 3 Area tnapected from 25" to 3" and 96" tQ t03" Total Length*= 14" Total Arf*l = 31.9ln2 Total Volume =44J tn;o

.Base. Material Single Oirettion Coverage W*eld Material Two Directional Coverage Total Axiid Coverage Volume. Area .ofBasemateriatoove.;ed in one rllrectlon Axial ar ofv;eld material COllered l0.3 k12 4oil>Ax= :zo.4 tR 45" kx = 't.4Jn2 Axia145° = 305,21n3

                     *130° Ax = iS tn2                                       .ooe t<x. =.o.v Jrr 45"(irc. = 17,4 tn2                                      45"" Circ. = 10.31n2                      Axial so: = 2338 ln3
                  £!)!' Circ. = 11.4 ltf                                   t3010Cir6.= '10.3ln2 Vo1 .ofBase material \'ered m oneditecl:ion                                                                    Total circumferential Coverage 45uAx=20A!n 14=285,6ln3                                Volume of)i'&fd material (;$Vered 00" Ax =1B..O ioix 14" := 224lrf                         Axiiil45" = 1A b'l2x 14" .; 1t& l                Circ   45° = 337.8 ln3 4S° Cll'c. "" ti4: !r?x 14" =24:tSln3                       Mal aoo =o.7m.zx: 14 = 9.8 Ina 50"'yln:;:= 17.41n:xt4"=;z4;3-6ln                       Clrc .45" = 1!i3 !ozx"14"= 144.2lri3 Circ*60° =387.2 ln3 Note: Areit determined using ViS"IO draWing program               Cire; 60"= 10:. li'!2x14" 144.21r/a
                                                                                                =

PermanentSI,lppbrt Permanent SQpport Ring RillS

                                                                                                                                                              'Attacnmem A-1 Page9of 10

PSEG UT Coverage Data Sheet Cutmitn**fnformation Component lmbrmation J

                                                                               "}'"'" w;,...::.*.., **m'***k<<,;,,;.,,jc_=w-*"*"" ...

Salem Configuration: Shell D to Upper Heat! Limitatin Typ. . '" === . Area Inspected from 169" to 11su Total Length = 7" Total Area= 31.9tn2 Total Volume= 223.3 ln3 Base Material Single Direction Coverage Weld Material Two Oireeti<mal Coverage Total: Axial Coverage Volume Area of Base ro.aterlal covered in one direction Axial area of weld matefialcovered 10.3!112 45°AA"' 1l:t91n 4SOAx= 1Ain2 Axial 45° = 151.2 ln3 ln2 60" Ax"' 0.7 ln2 450 Circ, =*10.3 inz

60" Ax =1S.3 45" Cifo:, ""' 10,5ln,. Axial 60° = 835 ln3 60" Cite. = Ht5ln2 50" Cire. = 10.. 31n2 Volume o.f'Base materia! ooiilered inone direction Total Cireumferentlai Coverage 45"' Ax=. 1!t9 in2x7" 139,31n1 Voiumec of weld material covered Axial 45<>= 1.71n2x13" = 11.9 lo

6G"AX='I1.0 ln2x7"= 711n Circ 45° = 224.2 ln3 45" Ctrc. "' 12;9 ln2 x 7" = 90.3.lna 00° Cire:.= 1:2;9ln2x 7" 90,3 Ins

Axial60f'=0:9'3lnx 13"<= 6.5111' Clrc. 45eo"' 10.3ln:tx 13"'"' 't33J' ln3 Circ 60° = 224.2 ln3 Note: Are;:; determine<! using \lis!odrawlng program Clro. &J'l'=i 0.31'n2x '!3 = 133.91n Pe:nn.anent Support PennanenfSupport: Ring Ring Z.d}t

Attachment A-1 Page 10 of 10 Outage No.; UT Coverage Da1a Sheet 2RF018 Total inspection Volume TotalWeld Length = 290" Total Inspection Area= 31.9ln2 Totallnsoection Volume= 92:51 fn3 I 45° Total Voietric c;;;e Type 1 Ax= 4684.3 ln3 Type 1 Ax= 3863.4 Jn3 Total coverage = Ax+ Circ. I 2 5800.5 + 5295,2 + 6257;6 Type 1 Clrc. = 537S;2ln3 Type 1 Circ. = 5375.2 ln3 5343.5 ln3 + 6257.6ln3/2 = 580!};5 tn3 = 17353.313 = .5784.4 Type 2 Ax= 202 8 ln3 Type2Ax= 152.11n;l; Type 2 Cite =270.4 ln3 Type*2 Cifc = 2"70.4 1ri"$ Tyf)e 3 Ax ""'305;2!n3 5784.41 '9251 c=. Type:3. Ax'= 233J) tna .60°'Total Votumetric*Ccverage Type a 'Ctrc o:::: 3B7c.:B ro:; Type.$ Circ = M't.a in'3

tl2 5%

Type 4Ax=1'5121n3 Type4Ax = 83.5 in.(> 43'32.8: lri'a *4 '62:57;6 hi$/2 = 529'5:2tn3 .. Type4 Circ =224.21n3 Type 4<Cira = 224.2 hi3

                                                                                      *0° Total Volumetric c.overage Total A,c: Covrag

5343:.5 ln3 Total Ax Coverage = U328l n3 Total Circ C<>verage = 6251:.6 tn3 Total Cir.c. Coverage = 651.61n3 =.6'257;6' ln3 Permane(lt*.$uppoif Peonanenf$!lPPbrt.

J;)f!g Ring

                                                                                                                                 ¥jrzof1tr

     --- *:;?;/                   WELD 2-CVCT-ZVS'-1
                                                                                                                                                                   !Attachment A-2 (TYP FOR z-cvcT-zvs3, 5,            n                   *                 (()'1                                               Page 1 of 4
                                                                                                                                     ---       CVCT-1 l            I CL 0      = CENTERLINE OF MANWAYl
   ..___                            WELD 2-CVCT-2VS-2 ITYP FOR 2-CVCT - 2VS-4,6,8l c                                                                               2-CVCT-MWY-NUTS WELD DETAIL 2-CV C T -2VS-7 q

2-CVCT -2VS- 5 2-CVCTz 2VS-s

                                                                                             -       2 - C V C T -2VS-3                         t:'lE             2-CVCT-MWY-BO L T S
                                                                                             * .*.I -

1 2-CVCT -2VS-l T -

                                                                                         \ Cj
                                                                                        ,T I

2-CVCT-2V S -8 2 - C V C T -2VS-4 2 - C V C T - 2VS 2 Summary# 275030 2-CVCT-2 I I IDRA\.JG BUILDING: LOCAT I O N : E L EVATION S : AUXILIARY CVCT ROOM 122' P&ID 205328 ATTENTION-. ANY R E VIS ION TO THIS PSEG N uc I ear, LLC FIGURE: B-5 I REVISION: 1 SHALL BE MADE ONLY BY Ck.D SYSTEM* SALEM NUCLEAR GENE R AT I N G STATION CHEMiCAL AND VOLUME CONTROL TANK 1 REVISED PER ORDER N o . 80038023. UNIT 2 - W ELD I HANGER IDENTIFICATION FIGURE LINE: NIA REV . DATE DES CRIPTION I NSERVICE INSPECTI O N DRAWING *THhR i D10::;;-Y;r:E:-;;;:

                                                                                                                                                    -"7 A"'   RINrs:npE c r-cTTiirnoMN Tt::

                                                  ,,           ULTRASONIC EXAMINATION SCAN LIMITATION REPORT
       \
       .c ustomer: PSEG 1     saiem Unit 2                 System:    eVe                                          l;)ummary No.: 275030 Applicable Report No: UT-04-334 and Support Leg Plate  #1 Distance From Centerline                           To      All US I OS Distance From    Ref, Point      -      29"                   42 V."

2) Interfering Condition Support Leg Plate #2 81.4 81.4 Distance From Centerline 0" To All US I OS 1---*- --- ------1 (Calculations and/or Comments above)

Distance From Ref. Point 99" To 112 '!!," f---c--------1 Total Exam Coverage: 81,4%

3) Interfering Condition Support Leg Plate#3 Distance From Centerline 0" To All US I OS Distance From Ref. Point 170" To 183 W'

4) Interfering Condition Support Leg Plate#4 Distance From Centerline 0" To All US I OS Distance From Ref. Point 245%" To 258 Y4" (For All Measurements Indicate: US, OS, CW, CCW)

        \                                     .
     ,JSketch I Photo Of Limitation(s): Four (4) Similar Support.
                                            --W======m-=====-=-========-

lor Photo Attached on Page 4 of This Attachment , _ ___,)eviewen Bob Kellerhr;ll Customer: John O'Neil Attachment A-2 Page 2 of 4

Weld Thickness & Contour

f. t

           *"                1 tv   t..;

J ""( -....! CIJ. 'SJ \,)..;

          *-../ *..J
                                  -:J e4  1

Attachment A-2 Page 4 of 4 ummary# 275030 2-CVCT-2

00 I Attachment A-3 2-BIT -VS-4 Page 1 of 9 MANWAY 2-BIT -VS-3 2 - BIT - C SHELL Summary# 715180 2-BIT -B 1=0 2-BIT-A 2:c D D BUILDING: L OCAT ION: ELEVATIONS: AUXILIAR Y BORON INJECTI O N 84' TANK AREA ATTENTI ON*

ANY R E V I SION TO THIS DRAWI NG SHALL BE MADE ONLY BY CAED PSEG N uclear, LLC FIGURE: B-119 I REVISION: 1 SYSTEM: BORON INJECTION TANK SALEM NUCLEAR GENERATING S TATI ON R E VISED PER ORDER No. 80038023.

UNIT 2 - WELD I HANGER IDENTIFICATION FIGURE-:-L-=r N-=E=-- : ,... N/ .,..,.

                                                                                                                                                                      .,.. A___  ___                __           __

1 REV. DATE DESCRIPTION I NSERVICE INSPECTION DRAWING THIRD 10 YEAR INSPECTION INTERVAL

                                                                            .:.... .-tc i. - *:. - .*...-- .......:,1: 1>'£. ......... .-. 0" . w CO 2000 PSEG Nuclear, LLC. All R igh.ts Reserved._

Attachment A*!J Page2of9 PSEG Salem 2RF019 Boron Injection Tank Lower Shell Transition to Lower Head WeldiD: 2BIT**A SmnmaryNo. 715180 Examination Volume Calculations Lower Shell Thickness: 4.40" (Nominal) Lower Head Thickness: 2.40" (Nominal) Weld Width: 2.0" Weld Length: 165.0" . I Area descibed. by a rectangle of2,4u X 3.0""" 7.2 bJ.a Area described by a triangle of 0.7n Base x 1.5" Height= 0,525 inz 100% Examination Volume"" (1:2 iw + 0.525 iit2) x 165.0""" 1274.625 in ( Hilltif,IHI!I;;l:W' .U r tt l t l

ULTRASONIC EXAMINATION SCAN liMITATION REPORT 1stomer: PSEG I Salem Unlt-2 Componont: Boron Injection Tank Summary#: 715180 Weld No.: 2rBIT-A Percent Of Exam Completed: 87% (Calculations Or Comments Below) Reference Point: Thennowell o* and 180" TC Limitation 1.5" Diameter coupling plus 1.5" (2 x 0.5" transducer width) and 1.75" us to 6.5"us.

1) Interfering Condition Thermowell Coupling (TC) 45° Axial ross: shown in the triangles of{% (0."} b x 2.2, H = o.ss',2J + rh (2.35") b x 2.2" H + 2.sa5*"

Distance From Centerline 1.75" us To 6.5"us 3.462_". . Distance From Ref. Point 0.75"CW & .75"CCW 2 Volume loss 45°: 3.465" x 3.0" Length = 1 0.3 95"3 x 2 i I TC's = ;l.d.7'. 2} Interfering Condition N/A * {0.8")b

Distance From Centerline To NIA 60" Axial loss:. shown in the triangles Of rh 4.7", §.§";.

NJA X 2.2" H = 0.88"2]+ rh {2.35") b X 4..0" H = Distance From Rf. PQ!nt

N/A To NIA 2 Volume loss 60°: 5.58" x 3.0" Length= 16.74n3 x 2

3) Interfering Condition N/A TC's = 3.4§"3 Distance From Centerline

                                                                                                                                                              .I N/A To  N/A I                                                                                                                                                              !I Area of a triangle: 1/a bH Distance From Ref. Poln't                              N/A To  N/A
                                                                                                                                                              !I Volume of a triangle: area x length (b)

(For All Measurements Indicate US, OS, CW, CCW) b"' base, H= He(ght, Sketch Of Limitation(ll'J): l

                                                                                                                                                               'I
                                                                                                                                                              'l L.!'il<i!f $'1#1!1                                                                                                                        il
                                                                                                                                                               *t i

l

.}

l t l

                                                                                                                                                              *I
                         ------ ..-                                                                                           -*

VI..,

(INCLUDED THE EXTEiNT OF% liASON FOR I.JMITED REPORT; AND SKJ!iCH SHOWING AREA OF LIMJTATI<:W * . lllxamlner: Bryant, Dennis N. 1 *10*2012 Examiner: N/A Date:

, ... )ilewer: Randy
**.,_ ;t r*

Unden. Cust Attachment A3 Page 3 of9

UlTRASONIC EXAMINATION SCAN LIMITATION REPORT (, i

        *'.stomar: p'sEG I Salem UnitM2                       Component: B oron Injection Tank                                Summary#: 715180 Weld No.: 2A'31T*A Peraent Of Exam Completed: 87%

ECalcutatlons Or Comments B$1ow)

 . Reference Point: Spport Legs 45"1 135", 2.25", & 315" Support Legs Limitations: 8 width, 4 support legs
  . 1) Interfering Condition          Support Legs Area described by a rectangl&(limltatlon drawing} 1.5" I Distance From Centerline                            0 us  To  6.5n us                                X 2.4". = 3,6"2 Distance From Ref. Point                                                                            Area described by a triangle 1/2 (.7) b x 1.J.i H = 0.525"

8" Length 2

                                                                                              ----...J** Volume loss= (3.6'1 + 0.525'.2) x 8 L = 33.0' x 4 2

1---

2) Interfering Condition -----

supports= 132.0"3 Distance From OenterUne NIA To NIA Olsance rom Ref. Point NIA & NfA Total Volume of weld inspection= 1274.625"3 e a Lost (Supports & TC} = 165.48"3

 .....,____...___          _                                -----......J Total Ar

3) Interfering Condition NIA r--

Distance From Centerline NIA. To N!A

                                                                                  ------...; Tota Area Examined*

l 11 Q9.145! 1------....--1 Total Inspection Volume 1274.625 x 100 = Olstance From Re f Point N/A To NfA (For All Measurements Indicate: U$, DS, ow, CW) Total Code Sketch Of limitati.on(s): See atta ched pages for Limitation and coverage drawings. Area of a Triangle = % bH

   }/lume of Triangle: Area x Length (L)

( ) a of Rectangle: WH

** .... iJiume of Rectangle: WHI..,

13 =Base H = He ight W =.wet!-' ,;.='o'!.71 :.-,:.:.-=:'!: . ...:;'i.;':'i:;-:1::..\:' ll:.;.:,;\:,>!.-.::.\hb*. *-:,-<j:£*,::*

."!. *

.' * *':** ** : *:.'po:{-*1;:(:,7;; i.,
Lower S hell "T" 4 40" (No mi n al}
=
PoEG- Salem 2R.F 019 ( 10-12-20{2
)
Support Leg Limited Scan Boroh lttiect Area iou Tank S\I!Hmary No m Lower Hettd ber; 715180 (1'11'1) (Low0r S!te/1 tra rurition to Lo W!d t.D: 2- wer I:!eud)
.lllT-t\
Shell TIJicku ess: 4.40" (N Lower Head ominal) Thiokness:
\Veld IVidtil: (2.40" No 2.o" mltml)
Weld Length: li"5 .0" Ground flush Support leg width: 8.0" Scunniug areaJim ited behiud ti*o.m !he weld the 4 support centedi11e legs Hencl Trnusitio up 6.5" on-n and for 8.0 the Lower
" ii1 lengtll.
Lower Shell "T' = 4.40" (Nominal) ( } I j____--- ng ell coupli Thermow . nts Cross Hatch Area Represe u.ne Unexamined Area I Vol PSEG- Salem 2RFO 19 10-12-2012 Thermowell Couplings - 0° & 180° Limited Examination Area Boron Injection Tank
, Summary Number: 715180 Lower Head (BIT}
(Lower Shell transition to Lower Head) Weld ID: 2-BIT-A Shell Thickness: 4.40" (Nominal) r,ower Head Thickness: (2.40" Nominal) Weld Width: 2.0" Weld Length: 165.0" Ground Flush Thermowell Coupling: 1.5" Dia. Lower Head "T" = Attachment A-3 2.40" (Nominal) Page 7 of 9
Weld Thickness & Contour [ Sum# { 715180 l componeEfl.D --- *2-BIT-A -] *=ascription Lower Head J
' "EKLO Salem QJ Sale: 2 QHoe creek :J 1 *
0 oo O 0 1oo 0 270° I
.* _ ***-*- Color Photo Attached on Page 9 of This Attachment Contour SEE ATTACHED C O NT O UR SHEETS AND COVERAGE CALCULATION SHEETS
=1 Dimensions I# -----D-es-c-ripti-no ____ ..
Dim :Coments = 0: : 111 0 Pipe 0 Lower Shell 4.35 Weld Width 2.0" . I T2 Toe of weld upstream Elbow Transition Area N/A Weld Length 165.0" I I T3 Weld Thickness 2.52" I I T4 Toe ofweld.downstream 2.39" I I T5 0 Pipe 0 Elbow 0 Valve 0 Tee Lower Head 2.34" I I Limitations ( if yes attach photo} 0 Yes 0 No I I Is Weld Identification Marked DYes 0No I I Is Lo Marked 0 Yes 0 No I I Can weld be visually defined 0 Yes D No I J examined By: Dennis Bryant Date: 10/10/12
'"JJE Specialist Review: (... ....--v Date: /0 1 '2-""Z.f/v*
J :J. I
*Attachment A-3 .! Page 8 of 9
0.0 2-BIT-VS-4 I 2-BIT-VS-1 Attachment A-4 Page 1 of 8 M AN W A Y 2-BIT-VS-3 Summary# 715160 2-BIT-2 2-BIT-D 2-BIT-C SHELL 2-BIT -B I .
=D 2 -BIT -A D
BUILDING: LOCATION: ELEVAT IONS: AUXILIARY BORON INJECTION 84' TANK AREA A.TTE .
**N.TlO N** ANY REVISIO N TO THIS DRAWING SHALL BE MADE ONLY BY CAED PSEG Nuclear LLC FIGURE: B-119 I REVI SION: 1 SALEM NUCLEAR GENER ATING STATION SY STEM: BORON INJECTION TANK 1 R EVISED PER ORDER No. 80038023.
UNIT 2 - WELD I HANGER IDENTIFICATION FIGURE LINE: N.IA REV. DATE DESCRIPTION I NSERVICE I NSPECTION DRAWING THIRD 10 YEAR INSPECTION INTERVAL
- .-*"; £i " ..... **..* ..:.. : ........ :....:.o:.-*.t '.!.*,{,....,;,..-*** -
CO 2000 PSEG Nuclear, LLC. All R ights Reserved.
Weld Thickness & Contour Nuclem"LLC Nozzle to Upper Head
! Color Photo Attached on Page 8 of This Attachment I
( SEE*ATTACHED SUPPLEMENTAL REPORT REPORT FOR COVERAGE AND CONTOUR (PAGE 5 OF 5) I __;, Des oi _n -------.C!"":'o
_en""!"t""='s---
m"':':'m """
# I*Toe of weld upstream Nozzle 2.45" D Elbow 0 Valve 0 Tee Weld Width 1.625
li T1 D Pipe T2 I 12.45". I Weld Length 33.25" \i T3 I T4 ! WelToedoflhiwelckness d downstream I 1-2.45" I I* j; 0Pipe 0Eibow Dvalve 0Tee *
Upper Head- r l r-- i;;.
L
..;;;s m,...;. . ita-ti""'on tta ; (if-ye-s-a;;;;...c_h_ph-o;;;
to-) --...:0.;.
. Y-. . -
es 0 No I I' I l is Weld Identification Marked DYes [2] No I I I l is Marked La 0 Yes 0 No I I lean weld be visual l y defihed DYes )1J No ll I .g/ J. ' ' Examined By: Dennis J.h;.4r-- Date: Bryant 10/10/12 C.) Specialist Review: Dave Mora 7{ Date: 11/lt_; I--------------. ---------,=------------------------------------- Attachment A-4 Page 2 of 8
,"::-;:'-:'""" -.* ;."Z. ,-,:;. '""'"**-*,. ** , *-* "' .__,...,. >;;'T.:;.....':J,"'; ';>'":;-,)':=* --.,., - ..-.-."";;:*'""""';.w***<*'"f :--:::" -'*."""""" - -
Supplemental Report PSEG Report No.: UT-12;..013 Summary No.: _7_1_51_a_o________
-=-=-- ---::o- -
re

t:
Examinet:: Washbwn,Jonatban Level; ll Examiner. N!A . NIA : :Z: Level: Site Review Giles, Tim Other: Mazyck. Edward P. Level: m ANIJ Review: !:.AN--- :oate: ___ Comments: Scan limited by no Je weld design I reinforcing filletweid. tJa?!L' Sketch or Photo: LlffEP- t/E&JJ r 1 j _.,.L..,.___...-, ...,.-..;.._.,,
**-* ,_ ***
A w*- ** .- '"""' ' * * * - --
00 . <:"':':!:"7,".;; -,*,*,::;.= * ;:-_:..::.= ::,.'l.z:,
. ;:O: *..!'.:::... ,* * , ;
*, I l'TI Vi:!SS_VOL.FRP 07111i!OO 8 VESSEL VOLUMETRIC EXAMINATION COVERAGE RISPORT
(-**.,CUSTOMER: SYSTEM: SALEM 2, RFO 12 BORON INJECTION TANK ' 1 I
SUMMARY
NO: COMPONENT 10: 715160 2*BIT-2 (UPPER HEAD} 1.0 CALCULATE REQUIRED EXAM VOLUME FORSTRAIGHT BEAM PLANAR FLAWS 0, 73 X 2.00 X 41.50 = 60.59 cuJn 1.1 Exam Height X Exam Width X Exam length = Exam 2.0 CALCULATE REQUIRED EXAM VOLUME FOR STRAIGHT BEAM LAMINAR FLAWS 0.00 X 0.00 X 0.00 = 0.00 cu.in 2.1 Exa m Height X Exam Width X Exam Length = Exam 3.0 CALCULATE REQUIRED PARALLEL EXAM VOLUME FOR 45> AND 609 0.73 X 2.00 X 83.00 = 121.18 cu.in 3.1 Exam Height X Exam Width X Exam Length = Exam 4.0 CALCULATE REQUIREQIMNSVfRSE EXAM VOLUME FOR45" AND GO> 0.73 X 2.00 X 121.18 cu.!n ( 83.00 4.1 Exam He ight X Exam Width X Exam length = Exam
=
6.0 CALCULATE STRAIGHT BI;AM PLANAR EXAM. COVERAGE 5.1 Limited above I OW exam volume Height of Width of benth gf V9lblm@ with ng Qb§tfYgted V91Ym'; Qb§trw;;td AnsEl Oootn:Gt@d AnsEl Glilm QQ,lerage n 7 + f\11 5.2 Limited Below I OW exam volume 1-l."""'hf I\( \Ml.rHh "'F 5.2 Ltmn;ea tselow I CW exam volume Height of Width of Length of Volumewith no Obstructed Volume Obruoted Area . o bsttuctd AnOia Exam Coverage , . . . 1, . " o.73 *x . 0.75. X 22.72 Total straight beam planar exam volume not examined 53.02
,:: A 5.3 Percent Volume Examined Total 0 vol
( w/No Coverage 100 { L__:3-- I 60 .59 j X 1'00} =: 12.50 * %
FACTORY MuTUAL Attachment A4 lt'fstJRANO CoM?MY Page 4 of 8 . 10 /3; 7L.Z 6 "'I *--oz.
till'
* --F T - -SS-V-OL-F. -P R -tl-1 6
17 ....,
/-0()_ ....,
8. -
VESSEL VOLUMETRIC EXAMINATION COVERAGE REPORT ( CALCIJLATE §TRAIGHT BEAM LAIII}INAR f,lXM CQY.ERAGE
* , 6.0 6.1 Limited above I CWexam volume Height of Width of Length of Volume with no Obstructed Volume ObstrLlCted Area Obstructed Area Exam Coverage 0.00 X 0.00 X 0.00 = 0.00 6.2 Limited Below I CW exam volume Height of Width of Length of Volume with no Obstructed Volume Obstructed Area Obstructed Area Exam Coverage 0.00 X 0,00 X o.oo = 0.00 Total straight beam planar exam volume not examined 0.00 6.3 Percent Volume Examined Total 0" VOl
Total o* Percent Volume w/No Coverage Exam Volume Examined
(, 1 oo .. {[,._ ... o .... o
...,.o ;.___ .,. I -o_o. _o__l x 1 oo} = 0.00 %
1.0 CALCUlATfARALlEL45° EXAM CO.,YERAG§ 7.1 Limited above I CW exam volum e Height of Width of Length of Volumewlth no Obstructed Volume Obstructed Area Obstructed Area Exam Coverage 0.73 2.00 X 41.50 60.59 Height of Width of Length of Volumewlth no Obstructed Volume Obstructed Area Obstructed Area Exam Coveraae Height of Width of Len gth of Volume wlth no Obstructed Volume .Obstructed Area Obstructed Area Exam Coverage 0.00 :* X 0.00 : X 0.00 Total: 45¢ parallel exam volume not exmlned - 60.59 7.3 Percent Volume .Examined Total45" pt;lrallel Total45"' pti\rallel Percent Volume vol w!No Coverage Exam Volume Exam! ned U
,J:O 100 60.59 I 60.00 (I
FA<rr.ov MuruAt. Attachment A-4 age 5 of 8 <JG*H-oz INSIJRANCEi COM*PANV
8.1 Limited above I CW exam volume Above 1 CW exam Height of Width of Length of Volum e with no Obstructed Volume Obstructed Area . Obstructed Area Exam Coverage 0.73 X 2.00 X 41.50 -
- 60 . 6 9 8.2 Limited Below I CCW exam vol um e Below I CCW exam Volume with no Height of Width of Length of Exam Coverage Obstructed Volume Obstructed Area Obstructed Area 0.00 X 0.00 X 0.00 0.00 l'otal60" parallel exam volu m e not examined 60.69 8.3 Percent Volume Examined Total60" parallel Total 60" parallel Percent Volume Vol w/No Coverage Exam Volume Examined 100 .. {l 60.59 I 121.19 _] 100} = 60.00 %
( X 9.0 CALCULATE TRANSVERSE 45° EXAM COVERAGE 9.1 Limited Clockwise exam volume CWExam Height of Width of Length of Volurnewith no Obstructed Volume Obstructed Area Obstructed Area Exam Coverage 0.00 X o.oo X 0.00 0.00 Height of Width o f Length of Volume with no Obstructed Volume Obstructed Area Obstructe d Area Exa m Coverage Height of Width of Length of Volumewlth no Obstructed Volume Obstructed Area Obstructed Area Exa m Coverage 0.00 ,. . X *0
. .00 X o.oo 0, 00 Total 45¢ transverse exam volume not examined .-0.00 9.3
Percent Volume Examined Total45" parallel Total 45" parallel Percent Volume Exam Volume Examined
(, 121.18 J X 100 } = FAcror:tv MuruN Attachment A**4 INSUANCE: CCHI!iPMIIl Page 6 of 8 -06ud,) 5-J-oL
VESSEL 1VOLUMETRIC EXAMINATION COVERAGE REPORT ( 1 0.0 CALCULATE TRANSVERSE 60<> EXAM COVERAGE 10.1 Limited Clockwise exam volume CWexam Height of Width of Length of Vo!ume with no Obstructed Volume Obstructed Area Obstructed Area Exam Coverage 0.00 X o.oo X 0.00 0.00 10.2 Limited Counterclockwise exam vo lum e CCWexam Height of Width of Length of Volume with no Obstructed Volume Obstructed Area 0 bstructed Area Exam Coverage 0.00 X 0.00 'X o.oo 0.00 Total 60 transverse exam volume not examined = 0.00 10.3 Percent Volume Examined Total aou Trans Vol Total 60" Trans Percent Volume w/NoCoverage Exam Volume Examined 100 .. {L_ o.oo
........- I 121.1 B l X 100} 100,00 %
c*
=
11.0 CALCULATE PERCENT OF TOTAL VOLUME EXAMINEO 11.1 Sum of Exam Volumes% Steps 5 Tnur 10 No. Of Exams (6) Examination Covera,ge [ 312.50 I 62.50 % Scan limited by nozzle weld design. This is a set-In nozzle. No scan from the nozzle side nor on or across the weld. Elxamfner: David Klalnjan Level; II Date:* La .
.04125/02 '" Jrt!.V FAOTOY MuruAt IM$'URANcg CoMPA.NY J{);C, .-r;t;?hh1 6 }-{;)<.,
Attachment Page 7 of8.
BIOSHIELD 2C-CVCH-5l1 EL. 9'l' 10 UliE ....._ 2711.!-RC-1240 SEE FIG. A-37 9 (I ("24 COLD LEGl v CRANE'-.
. "-WAL.L . 5 ** . 6.
I
. l' 3:1:
a lL BEN7 2C-CVCA-50'l
_
*. .
a
. 0 .. ; S-51 2' C *CVC '7 ..*
2C-'CVCG508 2CcCVCG-5IIl7A 2C-CVCH-507 REGEN ERATlVE BEND - *- -..*. * . ". * .
' 'u.s*_,
HEAT E X CHANGER ROOM
-r-'
2t.V17 >V'-Y - _?.. 2C-CVCS-506 FROM N0. . 2....... ....,_ _,., / REGEN.HX*
....... M ....._ ...... - ( <. ....,.,_ CLASS 2 ....... ....... Attachment A-5 BUILDING: LOCATION: E LEVATIONS:
1 Page 1 of 3 1 CONTAI NMENT BIOSHIE L D 79' to 99' PSEG ISO CV23-02 DRAV{IG ANNULU S P & ID 205301, 205328 AT T E N T I O N . ANY REVISION T O T HIS SHALL BE MADE ONLY BY CD PSEG Nuclear LLC FIGURE: A - 1 2 I REVISION: 1 SALEM NUCLEAR GENE RATI N G STAT I ON g6i SY S I EM: AND VO L UME CONTROL UNIT 2 - WELD I HANGER IDENTIFICATION FIGURE L INE: 3- CVc_1241 INSERVICE INSPECTI ON DRAWING 1 RESEO PER ORDER N o . 80038023. R E V. DATE DESCRIPTION TH=.; I RD lrzJ c,.. Y E.;.., AH rN
=---=" -:-::s=-=
p-= E cT
= r"""'
oN
"'7""" IN""':;"; . T '"'" =-= " E=-=-
R-:-;- VA;:-:-L--; _j
© 2000 PSEG Nuclear, LLC. All Rights Reserved.
PSE:G Weld Thickness & Conto ur Nudeet.r LLC 034500 O salem 1
\ )
I I I L-. Examined By:
Summary# 036200 BIOSHIELD 3-CV-1 231 -1 6 2CV274
..._ 2CV78 K.
18 ZC-CVCH'-737 '- ['; ZC-CVCH-736 % LINE 27 -RC-123 ....._
)
CRANE"-
. SEE FIG. A-38 tJ 2C-CVCS-511J2 RL-26 ELL c*z3 COLD LEGl ! THRU 4 ***
qi1J .CV.l CBPR-!l
;'- 2C-CVCG-511JI 12 C8PR-2l 2C-CVCA-511J0l 0 'l}i S ZC-CVCG-5!11 3
o. II ZC-CVC.G-734' cqPR-1>
BEND 2C-CVCG-735
!'WR-2>
BEND REGENERATIVE HEAT EXCH ANGER ROOM CLASS 1 CLASS 2 C:y,
. / NSR - 2CV77 ' L 2CV7'l ....... , FROM N0. 2 ' ZC-CVS-51114 HX, *', ' CIPRl , ,y4({ ' REGEN. ' Attachment A-6 ' Page 1 of 3 X
BUILD ING: L O CATION: E L E VATIONS: , CONTAINMENT BIOSHIELD 79' to 99' PSEG I S O CV23-02 ANNULUS P & ID 205301, 205328 AT T E N T I O N : ANY REVLStON TO THIS DRAWING SHALL . BE MADE ONLY BY CAED PSEG N uclear, LLC FIGU RE: A-1 3 I REVISION: 1 SYSTEM: C H E M I CAL AND VOL UME CONTROL SALEM N UCLEAR GENERATIN G S TATION U NIT 2 W ELD / HANGER IDE N TIFICATIO N FIGURE CHARGING LINE: 3 - cv-1231 , INSERVICE INSPECTION DRAWING I 1 REV I S ED P ER ORDER N o . 8003 802 3 . . THI R D 1 0 YEAR INSPECTI O N INT E R VA L CD 2000 PSEG Nuclear, D E S CRIPTION REV. DATE L C. Al l R ights Reserved. _
Weld Thickness & Contour iVuclecn* LLC. Valve2CV78 Pipe Di m e n si o n s _ ? *---*__j s cr i p t i im Co mm ts i--=-==-,..,.,. o.... e___on __ .,_ ':"':""":""::":e ""'n Upstream Weld Width 0.65" -- 0 Pipe 0 Elbow 0 valve O ree N/A IIWToeeldofThiwelckness d upstream I Weld Length 1 1 .25" I T2 N/A 0.50" I I IToe of weld downstream 0.442" I I Lil i smWelitatdioInsdent(iifficyesatioatn tMarachkphoted o) Downstream I 0 Pipe 0 Elbow [] Valve 0 Tee 0 Yes 0 Yes 0.443"
@No O_No I
I I I I li! Csan welMardkedbe visually defined Lo [I] Yes D No I I [2] Yes 0 No I I l L:) =-cialistevl;w: -__*-----Da-_v-eM---ora:_=-::_,_:_:
.. Ex ami n ed By: D at e : 1 0/20/1 2 D ate _tv_-2..---_,_,,_/_) .;... --__:_JU3 . . ----
Attachment A-6 Page 2 of 3
Attachment A-7 Page 1 of 5 1'
,L LINE 6-SJ-1242 Lj}
SEE FIG. A-73 BIOSHIE AREA u 10 ANNU LUS AR EA 2C-24-SIA-3
<BPSl Summary# 161200 EL. 87' 6 1 0-SJ-1241 -14 LINE 27 -RC-1240 SEE FIG. A-37 45°(V;l BUILDING: L OCATION: ELEVATIONS:
CONTAINMENT BIOSHIELD 81' 112' PSEG ISO RH2 3-04 ANNULUS P & I D 2 05301, 205334 AN'(, HEV:IStON . TO THIS DRAV'{IG PSEG Nuclear, L L C FIGURE: A - 6 3 ! R E VISION: 1 SHHJ.. L BE MADE ONLY BY CD SYS TEM: S A FET Y I N J E CTI O N SYSTE M SALEM NUCLEAR GENERATIN G STAT I ON U N I T 2 - WELD I HANGER IDENTIFICATION FIGURE LINE: 10-S.J-lZ41 I NSERVJCE INSPECTION DRAWI NG I 1 R EVISED PER ORDER No. 80038023. REV. DATE DESCRIPTION T H IRD 10 YEAR INSPECTION I N T E R V A L CD 2000 PSEG Nuclear, LLC. Al l Rrghts Reserved *
Wel d Thickness & Contou r Attachment A-7 2 of 5 Color Photos Attached on Page 4 & 5 of This Attachment
\ 7 \ I \ I \ I \ I \ I Dim ensions # D escription Dim Comments T1 0 Pipe 0 Elbow O va!ve 0 Tee U pstream 1 .698" T2 Toe of weld u pstream 1 .1 98" READ I N G TAKEN AT WELD EDGE.
'j. T3 Weld Thickness 1 .25"
!1 T4 Toe of weld downstream 1 . 1 32" LIM ITATION DUE TO CAST TEE CONFIGURATION
PSEG** U LTRASONIC EXAMINATION SCAN L I M ITATION R EPORT l\"w:uwr LLC (' '" -======;==i==l ( I_ .:ustomer: PSEG I Salem U n it 2 1 6 1 200 Component I D : 10-SJ-1 241-14 Applicable Report No: UT-05-1 28 Reference Point: N/A [1'}'1t;rt-;g Condition CAST TEE CONFIGURATION l Distance F ro Centerline N/A To I .
*. 1 I Axia l 1 0o% o%
Distance From Ref. Point [ 2!!-e ring Condition 0.0" OS To N/A 100% 1 00% 0% 0%
- - - .- - W>.->>>' ; ..... , .c*. A *<r, Distance From Centerline N/A To N/A To 50 .0%
Distance From Centerline
",;F;;;m Ref. Point N/A To
; US. os, : c-*w*_-)
t3nc To
* *-# -=--==*.,..
NIA
-*-****-1 r
c w ,"c ( { \ Attachment A-7 Page 3 of 5
Attachment A-7 Page 4 of 5
Attachment A-7 Page 5 of 5
Attachment A-8 Page 1 of 2 Summary# 1 62450 1 0-SJ-1 231 -14
-j "fuNE 27-RC-123111 SEE FIG. A-38 BIOSHIELD AREA 2C-23-SIA-6 TO No. 23 ACCUMULATOR r'-
2C-'2.3-'SIG-11 BUILDING: LOCATION: E L EVATIONS: CONTAINMENT BIOSHIELD ANNULUS 8 1 ' - 112' PSEG ISO RH23-01 P & I D 2 05301. 205334 .AT T E. N T I O*N
ANY REVI SION TO .NT HIS DRAWI NG PSEG Nuclear, LL C FIGURE: A -64 I REVISION: 1 SHALL BE MADE 0 LY BY CAED A CCU MUL ATO R DISC H AR GE SYSTEM: SA FETY INJECTI O N SYSTEM I
SALEM N UCLEAR GENERATING S T ATION U NI T 2 . - WELD I HANGER I.D EN. TIFICATIO N FIGURE LINE: . 1 0 - S J -1 231 INSERVICE INSPECTION DRAWI NG I 1 R EVISED PER ORDER No. 80038023. 10 YEAR INSPEC TION INTERVAL CD 2000 PSEG Nuclear. LLC. REV. DATE DESCRIPTION THIRD All Rights Reserved * .
-o- . ---- *- --o- . - - = ---- - - . . --**---- ---------------==- -=-==
Attachment A-8 P" _)£"': Calibratior( lamination Page 2 of 2 UT
Site/Unit: Salem S2

Procedure: 54-ISI-836 "
Outage No.: 2RF01 9 Su)Olmary No.: 162450 Procedure Rev.: 013 << Report No.: UT*12-056 Workscope: lSI Work Order No.: 50141316 Page: of 1 Code: 1998 Edition 1 2000 Addenda cat.!ltern: R-AIR1.1 1*5 Location: CNTMT, 23 SJ56, Bioshield Drawing No.: A-64
Description:
TEE TO VALVE (23SJ56} System lO: SJ - Component 10: 1 0-SJ-12;31*14 Siz<J!Length:
Thickness/Diameter:
limitations: See Comments Start Time: Finish Time: Serial No.: Instrument Settings Serial No.: Search Unit Cal. Checks Time Calibration Axial Orientated Search Unit Signal Sweep Manufacturer: Initial Cal. Manufacturer: Reflector Amplitude % Division l-L-- --1 . Delay: Range: lnter. Cal_. 1 Fr-eq.: --- Center Freq.: -- 1 Inter. Cal. M'tl CaiNe!: Pulser: Exam Angle: Squint Angle: 1 Final Cal Damping: Reject Measured Angle: Mode: _ _ _ _
......_ Couplant Rep. Rate: Freq.: Exit Point: # of Elements:
Cal. Batch: Circumferential Orientated Search Unit Filter: Mpde: Confrg.: Focus:
----- Type: Calibration Signal Sweep Voltage: Shape: Contour: Reflector Amplitude % Division I
Mfg.: I I Wedge-Style: I I I Beam Batch: I I I Ax. Gain (dB): Circ. Gain (dB): Search Unit Cable
---- Type: .
Type: Length: No. Conn.: Screen Dlv. = . in. of Mfg.: I Scan Coverage Calibration Block O DowhStream O .Scan dB: Reference Slock Reference/Sim.ulator Block Cal. Block No.: ------- Upstream I I Gain Signal Sweep Thickness: Dia.: CW 0 CCW 0 Scan dB: Serial No. dB Reflector Amplitude % Division I Cal. Blk. Temp.: Type: Temp. Too{: Exam Surfac.e: Camp. Temp,; Temp, Tool: L____ Surface Condition: Re.cordable lndication{s): Yes D No 0 (If Yes, Ref. Attached Ultrasonic ind.ication Report.) __ __ __ _ __ __ __ __ _ Comments: No examination due to component configuration and Results: Accept 0 Reject O
D material properties.
.. . f":_erit Of Coverage Obtained > 90%: 0% Reviewed Previous Data:
Examtner Sheeran, Joshua Level n Date Reviewer
---;.;/'
Signature c7". ignature 1 0/25(2012 M ora, Dave level _ Examiner Level f'UA Site Reviev< N/A Giles, Tim
/o/z.r/J z..
jt:' o('s: ANII Other Level 111 ANI! Review _Signature Date Mazyck, Edward P. =-
Attachment A-9
- Page 1 of 5 LlE 6-SJ-1212 SEE FIG. 11-81 u /"'
2C-21-S1A-12
.:1:
C7PSI BIOSHIELD
3 AREA LL.
ANNULUS 5 AREA
'summary# 1 64900 '
1 0-SJ -1 21 1 -1 5 2C-21-SIH-11 .. 4
<5PRJ g )
c- ..=-U-LINE 27 RC-121 0 SEE FIG. A-40 3
/ '-; 2C-21-S!H-10 TO NO. 21 ACCUMULATOR <lPRl BUILDING: LOCATION: ELEVATIONS:
CONTAINMENT BIOSHIELD 85' - 112' PSEG ISO RH23-01 ANNULUS P & ID 20 530 1, 205334 AT-T ENT ION
. *"* ANY. REVISION TO THIS DRAWI NG SHALL BE MADE ONLY BY CAED PSEG N uclear, LL C FIGURE: A - 6 6 REVISION: 1 SYS TEM: SAFETY INJ E C TION SYSTEM I - I SALEM NUCLEAR GENE R ATING S T ATION ACCUMULATOR DISCHARGE UNIT 2 W ELD I HANGER IDENTIFICATION FIGURE L I N E: 1 0-'S J--1211 INs E RV ICE INs p E c Tl ON DRAWING I L----11 1 R EVISED PER O RD ER No. 80038023.
T !=7: r;Ic;::;: O....,N 11:-;:-; N-:;::-
© 2000 PSEG Nuclear, REV. D ESCRIPTION CT T r=r DATE H I R D10 YE==A R IN
--:;:-;: SP;;:=
E;:::-: L C. Al l ER "'Vl"A A:I Rights Reserved. _
Weld Thickness & Contour: Attachment A-9
Page 2 of 5 CIJS T TtE£
* ---- \ -- -- - - ----------- \ I \ I \ I \ I \ I --*----------- !Color Photos Attached on Page 4 & 5 of T his Attachment I -,o.-
v,%,<_<-o-o-o-0-0-0oOoOoOoOoO-'o:,_
'-.>0>'-/o:-:- .-.-""O Dimensions o
Oo..;-.-"'-;;;;;K;
; -,, : ::--. -----;---O;;:;;-,=;jc7-ci;-;; --.ioi'i"ii-.k';:;.; ,* ,=,;<e<'W/i;!>>);<:*.;:;* - ***--=--=*w ::-
Comments Date: 1 0/1 3/06 Date : -;1: kfR *:=
PSEG U LTRASON I C EXAM INATION SCAN L I M ITATION REPORT
;Vu.derrr LLC J . ustomer: PSEG I Salem U n it 2
_ _ J Component ID: 1 !.H;J1 2 1 1 -1§ "'
, Upstream Exam % Downstream Exam %
50.0% Distance From Centerline D istance From Ref. Point (For All Measurements I ndicate: US, DS, CW, CCW) S ketch l Photo Of Lim itation(s): (TNCLUDED THE E)(TENT OF % COMPLETED OF EXAM AND REASON FOR LIMITED REPORT, AND SKETCH SHOWING AREA OF LIMITATION.) Examiner: Edward Date: ' Examiner: N/A Level: N/A Date: N/A 1 0/1 3/2006 lu I ¢(D Date: 1 <\l
' Date:
roh1/o I Attachment A9 Page 3 of 5
Attachment A9 Page 4 of 5
Attachment A-9 Page 5 of 5}}

ML14211A590: Difference between revisions

Latest revision as of 13:45, 25 February 2020

Text

SUMMARY

Description:

Navigation menu