Browse wiki

CORRESPONDENCE-LETTERS  and INCOMING CORRESPONDENCE

ANSI N45.2.11 +, ANSI N45.2.12 +, ANSI N45.2.23 +  and ANSI N18.7, Administrative Controls and Quality Assurance for Nuclear Power Plants during the Operational Phase +

Carbon +  and Lead +

10 CFR 50 Appendix R +, 10 CFR 50.73 +, 10 CFR 50.72 +, 10 CFR 21 +, 10 CFR 50 Appendix A +, 10 CFR 50 +, 10 CFR 50 Appendix J +, 10 CFR 50 Appendix B +, 10 CFR 50.59 +, 10 CFR 50.2 +, 10 CFR 5 +, 10 CFR 50 Appendix B Criterion XVI +, 10 CFR 50.54#f +, 10 CFR 50.54#q +, 10 CFR 50.54#p +, 10 CFR 50.71#e +  and 10 CFR 50#s +

WM 96-0081 +, WO 95-0181 +, WO 96-0068 +, WO 96-0118 +, WO 96-0101 +, WM 97-0009 +, WO 96-0081 +  and WM-97-0009 +

05000482  +  and 00482  +

Maynard O +  and WOLF CREEK NUCLEAR OPERATING CORP. +

NRC Generic Letter 89-08, Erosion/Corrosion-Induced Pipe Wall Thinning +, NRC Generic Letter 89-04, Guidance on Developing Acceptable Inservice Testing Programs +, NRC Generic Letter 96-01, Testing of Safety-Related Logic Circuits +  and NRC Generic Letter 89-10, Safety-Related Motor-Operated Valve Testing and Surveillance +

ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +, ML20134J914 +  and ML20134J914 +

NRC Bulletin 79-02, Pipe Support Base Plate Designs Using Concrete Expansion Anchor Bolts +  and NRC Bulletin 79-14 +

NUREG-1431 +, NUREG-1136 +, NUREG/CR-5455 +, NUREG-0588, Responds to 870709 Request for NRR Assistance in Determining Adequacy of Two Test Repts Re Acceptance Criteria of NUREG-0588,Category I.Qualification of Kulka Terminal Blocks Demonstrated & Not Used in Instrumentation Circuits +  and NUREG-1482, Revision 4, Guidelines for Inservice Testing at Nuclear Power Plants: Inservice Testing of Pumps and Valves and Inservice Examination and Testing of Dynamic Restraints (Snubbers) at Nuclear Power Plants Final Report +

Regulatory Guide 1.33 +  and Regulatory Guide 1.70 +

Texas +, Kansas +  and Washington +

Steam Generator +, Feedwater +, Service water +, Auxiliary Feedwater +, Main Turbine +, HVAC +  and Residual Heat Removal +

Safe Shutdown +, Ultimate heat sink +, Fire Barrier +, Temporary Modification +, Flow Accelerated Corrosion +, Frazil ice +, Commercial Grade +, Pressure boundary leak +, Fire Protection Program +  and Dedication package +

WM 96-0081 +, WM 97-0009 +  and WM-97-0009 +

WO 95-0181 +, WO 96-0068 +, WO 96-0118 +, WO 96-0101 +  and WO 96-0081 +